diff --git a/elegoo.log b/elegoo.log new file mode 100644 index 0000000..badcdba --- /dev/null +++ b/elegoo.log @@ -0,0 +1,29641 @@ +[2026-01-29 20:44:04.829] [info] [logger.cpp:80] [1887] elegoo log init finish! +[2026-01-29 20:44:04.858] [info] [main.cpp:209] [1887] inputtty:./config/printer,gcode_fd:4 +[2026-01-29 20:44:05.037] [info] [main.cpp:226] [1887] Starting Elegoo... +[2026-01-29 20:44:05.037] [info] [main.cpp:228] [1887] start_args.size:17,sizeof(long_options):9 +[2026-01-29 20:44:05.037] [info] [main.cpp:231] [1887] start_args[img_version]:00.00.00.00 +[2026-01-29 20:44:05.037] [info] [main.cpp:231] [1887] start_args[gui_version]:01.01.11.03 +[2026-01-29 20:44:05.037] [info] [main.cpp:231] [1887] start_args[elegoo_version]:12.26.19.32 +[2026-01-29 20:44:05.037] [info] [main.cpp:231] [1887] start_args[camera_version]:00.00.00.00 +[2026-01-29 20:44:05.037] [info] [main.cpp:231] [1887] start_args[canvas_version]:00.00.00.00 +[2026-01-29 20:44:05.037] [info] [main.cpp:231] [1887] start_args[ota_version]:01.03.01.89 +[2026-01-29 20:44:05.037] [info] [main.cpp:231] [1887] start_args[bed_sensor_version]:00.00.00.00 +[2026-01-29 20:44:05.037] [info] [main.cpp:231] [1887] start_args[start_reason]:startup +[2026-01-29 20:44:05.037] [info] [main.cpp:231] [1887] start_args[apiserver]:/tmp/elegoo_uds +[2026-01-29 20:44:05.037] [info] [main.cpp:231] [1887] start_args[toolhead_gd32_version]:00.00.00.00 +[2026-01-29 20:44:05.037] [info] [main.cpp:231] [1887] start_args[autosave_file]:/opt/usr/cfg/autosave.cfg +[2026-01-29 20:44:05.037] [info] [main.cpp:231] [1887] start_args[gcode_fd]:4 +[2026-01-29 20:44:05.037] [info] [main.cpp:231] [1887] start_args[config_file]:/opt/inst/printer_dsp.cfg +[2026-01-29 20:44:05.038] [info] [main.cpp:231] [1887] start_args[cpu_info]:2 core ARMv7 Processor rev 5 (v7l) +[2026-01-29 20:44:05.038] [info] [main.cpp:231] [1887] start_args[mcu_gd32_version]:00.00.00.00 +[2026-01-29 20:44:05.038] [info] [main.cpp:231] [1887] start_args[machine_model]:Centauri Carbon 2 +[2026-01-29 20:44:05.038] [info] [main.cpp:231] [1887] start_args[os_version]:01.02.12.01 +[2026-01-29 20:44:05.038] [info] [main.cpp:236] [1887] long_options[debuginput]:i +[2026-01-29 20:44:05.038] [info] [main.cpp:236] [1887] long_options[input-tty]:I +[2026-01-29 20:44:05.038] [info] [main.cpp:236] [1887] long_options[api-server]:a +[2026-01-29 20:44:05.038] [info] [main.cpp:236] [1887] long_options[logfile]:l +[2026-01-29 20:44:05.038] [info] [main.cpp:236] [1887] long_options[verbose]:v +[2026-01-29 20:44:05.038] [info] [main.cpp:236] [1887] long_options[debugoutput]:o +[2026-01-29 20:44:05.038] [info] [main.cpp:236] [1887] long_options[dictionary]:d +[2026-01-29 20:44:05.038] [info] [main.cpp:236] [1887] long_options[import-test]:t +[2026-01-29 20:44:05.038] [info] [printer.cpp:50] [1887] create Printer success! +[2026-01-29 20:44:05.039] [info] [printer.cpp:365] [1887] connect begin! +[2026-01-29 20:44:05.039] [info] [printer.cpp:284] [1887] read_config begin! +[2026-01-29 20:44:05.104] [info] [webhooks.cpp:595] [1887] create WebHooks success! +[2026-01-29 20:44:05.104] [info] [webhooks.cpp:384] [1887] create ServerSocket success! /tmp/elegoo_uds +[2026-01-29 20:44:05.104] [info] [webhooks.cpp:443] [1887] create ServerSocket success! +[2026-01-29 20:44:05.411] [info] [config_manager.cpp:162] [1887] begin read sn info +[2026-01-29 20:44:05.411] [info] [config_manager.cpp:196] [1887] read product auth success +[2026-01-29 20:44:05.441] [info] [config_manager.cpp:144] [1887] machine: {"machine":{"model":"Centauri Carbon 2"},"versions":[{"os_version":"01.02.12.01"},{"mcu_gd32_version":"00.00.00.00"},{"toolhead_gd32_version":"00.00.00.00"},{"bed_sensor_version":"00.00.00.00"},{"canvas_version":"00.00.00.00"},{"camera_version":"00.00.00.00"},{"elegoo_version":"12.26.19.32"},{"gui_version":"01.01.11.03"},{"ota_version":"01.03.01.89"},{"img_version":"00.00.00.00"}]} +[2026-01-29 20:44:05.482] [info] [config_manager.cpp:150] [1887] parse machine model from sn: Centauri Carbon 2 +[2026-01-29 20:44:05.482] [info] [config_manager.cpp:200] [1887] begin read supplement info +[2026-01-29 20:44:05.483] [error] [config_manager.cpp:205] [1887] file not exist: /opt/usr/cfg/supplement.json +[2026-01-29 20:44:05.561] [info] [timer_manager.cpp:61] [1887] Starting TimerManager with 4 threads +[2026-01-29 20:44:05.562] [info] [timer_manager.cpp:72] [1887] Adding timer task: ConfigManager_save_supplement_info, interval: 500 ms, repeat: false +[2026-01-29 20:44:05.615] [info] [config_manager.cpp:311] [1887] set default supplement info, ret : true +[2026-01-29 20:44:05.619] [info] [config_manager.cpp:441] [1887] load persistent supplement info success +[2026-01-29 20:44:05.719] [info] [device_status.cpp:132] [1887] Create component manager for Centauri Carbon 2 +[2026-01-29 20:44:05.954] [info] [sql_database.cpp:48] [1887] Database version mismatch, db_version 0 updating to version 7 +[2026-01-29 20:44:06.029] [info] [sql_database.cpp:974] [1887] Migration: added 'flag' column to table delete_file +[2026-01-29 20:44:06.055] [info] [sql_database.cpp:164] [1887] Delete SQL: DELETE FROM file_details WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_details GROUP BY filename HAVING MAX(create_time)); +[2026-01-29 20:44:06.055] [info] [sql_database.cpp:164] [1887] Delete SQL: DELETE FROM file_thumbnail WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_thumbnail GROUP BY filename); +[2026-01-29 20:44:06.081] [info] [record_manager.cpp:302] [1887] Loaded 0 tasks from the database. +[2026-01-29 20:44:06.081] [info] [record_manager.cpp:318] [1887] Loaded 0 files from the database. +[2026-01-29 20:44:06.081] [info] [record_manager.cpp:323] [1887] Loaded 0 thumbnails from the database. +[2026-01-29 20:44:06.111] [info] [record_manager.cpp:328] [1887] Loaded 0 delete file records from the database. +[2026-01-29 20:44:06.111] [info] [record_manager.cpp:333] [1887] Loaded 0 exception messages from the database. +[2026-01-29 20:44:06.112] [info] [record_manager.cpp:361] [1887] Local file count 8 does not match cached file details 0, need to parse online files. +[2026-01-29 20:44:06.112] [info] [record_manager.cpp:607] [1887] Parsing local files in /opt/usr/gcode/local/ +[2026-01-29 20:44:06.113] [info] [record_manager.cpp:496] [1887] Parsing local file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-01-29 20:44:06.118] [info] [record_manager.cpp:40] [1887] GcodeParser open file: /opt/usr/gcode/local//ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-01-29 20:44:06.118] [info] [config_manager.cpp:338] [1915] save supplement info success +[2026-01-29 20:44:06.166] [info] [record_manager.cpp:383] [1887] color map size: 1 +[2026-01-29 20:44:06.167] [info] [sql_database.cpp:97] [1887] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-01-29 20:44:06.186] [info] [sql_database.cpp:97] [1887] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-01-29 20:44:06.205] [info] [record_manager.cpp:512] [1887] Parsed file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode, size: 3050042, layer: 250, print_time: 1247, total_filament_used: 6.1, color_map size: 1 +[2026-01-29 20:44:06.205] [info] [record_manager.cpp:496] [1887] Parsing local file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-01-29 20:44:06.207] [info] [record_manager.cpp:40] [1887] GcodeParser open file: /opt/usr/gcode/local//ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-01-29 20:44:06.281] [info] [record_manager.cpp:383] [1887] color map size: 2 +[2026-01-29 20:44:06.282] [info] [sql_database.cpp:97] [1887] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-01-29 20:44:06.298] [info] [sql_database.cpp:97] [1887] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-01-29 20:44:06.313] [info] [record_manager.cpp:512] [1887] Parsed file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode, size: 6055579, layer: 225, print_time: 4998, total_filament_used: 42.11, color_map size: 2 +[2026-01-29 20:44:06.314] [info] [record_manager.cpp:496] [1887] Parsing local file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-01-29 20:44:06.315] [info] [record_manager.cpp:40] [1887] GcodeParser open file: /opt/usr/gcode/local//ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-01-29 20:44:06.375] [info] [record_manager.cpp:383] [1887] color map size: 4 +[2026-01-29 20:44:06.375] [info] [sql_database.cpp:97] [1887] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-01-29 20:44:06.390] [info] [sql_database.cpp:97] [1887] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-01-29 20:44:06.406] [info] [record_manager.cpp:512] [1887] Parsed file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode, size: 4425269, layer: 240, print_time: 2510, total_filament_used: 15, color_map size: 4 +[2026-01-29 20:44:06.406] [info] [record_manager.cpp:496] [1887] Parsing local file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-01-29 20:44:06.410] [info] [record_manager.cpp:40] [1887] GcodeParser open file: /opt/usr/gcode/local//ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-01-29 20:44:06.466] [info] [record_manager.cpp:383] [1887] color map size: 3 +[2026-01-29 20:44:06.467] [info] [sql_database.cpp:97] [1887] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-01-29 20:44:06.530] [info] [sql_database.cpp:97] [1887] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-01-29 20:44:06.545] [info] [record_manager.cpp:512] [1887] Parsed file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode, size: 916525, layer: 17, print_time: 924, total_filament_used: 3.22, color_map size: 3 +[2026-01-29 20:44:06.545] [info] [record_manager.cpp:496] [1887] Parsing local file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-01-29 20:44:06.547] [info] [record_manager.cpp:40] [1887] GcodeParser open file: /opt/usr/gcode/local//ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-01-29 20:44:06.611] [info] [record_manager.cpp:383] [1887] color map size: 1 +[2026-01-29 20:44:06.612] [info] [sql_database.cpp:97] [1887] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-01-29 20:44:06.625] [info] [sql_database.cpp:97] [1887] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-01-29 20:44:06.638] [info] [record_manager.cpp:512] [1887] Parsed file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode, size: 3643155, layer: 536, print_time: 6705, total_filament_used: 89.04, color_map size: 1 +[2026-01-29 20:44:06.639] [info] [record_manager.cpp:496] [1887] Parsing local file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-01-29 20:44:06.640] [info] [record_manager.cpp:40] [1887] GcodeParser open file: /opt/usr/gcode/local//ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-01-29 20:44:06.711] [info] [record_manager.cpp:383] [1887] color map size: 1 +[2026-01-29 20:44:06.712] [info] [sql_database.cpp:97] [1887] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-01-29 20:44:06.725] [info] [sql_database.cpp:97] [1887] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-01-29 20:44:06.739] [info] [record_manager.cpp:512] [1887] Parsed file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode, size: 97996914, layer: 1629, print_time: 19004, total_filament_used: 109.63, color_map size: 1 +[2026-01-29 20:44:06.740] [info] [record_manager.cpp:496] [1887] Parsing local file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-01-29 20:44:06.744] [info] [record_manager.cpp:40] [1887] GcodeParser open file: /opt/usr/gcode/local//ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-01-29 20:44:06.826] [info] [record_manager.cpp:383] [1887] color map size: 1 +[2026-01-29 20:44:06.826] [info] [sql_database.cpp:97] [1887] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-01-29 20:44:06.840] [info] [sql_database.cpp:97] [1887] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-01-29 20:44:06.853] [info] [record_manager.cpp:512] [1887] Parsed file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode, size: 5190855, layer: 227, print_time: 1547, total_filament_used: 9.83, color_map size: 1 +[2026-01-29 20:44:06.853] [info] [record_manager.cpp:496] [1887] Parsing local file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-01-29 20:44:06.854] [info] [record_manager.cpp:40] [1887] GcodeParser open file: /opt/usr/gcode/local//ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-01-29 20:44:06.900] [info] [record_manager.cpp:383] [1887] color map size: 2 +[2026-01-29 20:44:06.901] [info] [sql_database.cpp:97] [1887] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-01-29 20:44:06.912] [info] [sql_database.cpp:97] [1887] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-01-29 20:44:06.925] [info] [record_manager.cpp:512] [1887] Parsed file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode, size: 975620, layer: 30, print_time: 1048, total_filament_used: 5.18, color_map size: 2 +[2026-01-29 20:44:06.925] [info] [record_manager.cpp:636] [1887] Finished parsing local files, total: 8 +[2026-01-29 20:44:06.925] [info] [record_manager.cpp:365] [1887] RecordManager initialized successfully. +[2026-01-29 20:44:06.926] [info] [pins.cpp:112] [1887] create PrinterPins success! +[2026-01-29 20:44:06.955] [info] [msgproto.cpp:606] [1887] create MessageParser success! +[2026-01-29 20:44:06.955] [info] [mcu.cpp:1963] [1887] restart_via_remoterpc +[2026-01-29 20:44:06.955] [error] [serialhdl.cpp:309] [1887] SerialReader::disconnect() +[2026-01-29 20:44:06.955] [info] [dsp_helper.h:31] [1887] remoterpc_ctrl 0 +[2026-01-29 20:44:06.956] [info] [webhooks.cpp:56] [1887] webhooks client 9738884: New connection +[2026-01-29 20:44:06.964] [info] [webhooks.cpp:1213] [1887] handle_query is_subscribe true : {"canvas_dev":["canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[2026-01-29 20:44:06.965] [info] [webhooks.cpp:1213] [1887] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[2026-01-29 20:44:06.965] [info] [device_ui_message_handle.cpp:47] [1887] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[2026-01-29 20:44:06.966] [info] [device_ui_message_handle.cpp:485] [1887] Total tasks: 0 +[2026-01-29 20:44:06.966] [info] [webhooks.cpp:787] [1887] return handle_sync_info: {"history_task_list":null,"offset":0,"script":"get_history_task","total":0} +[2026-01-29 20:44:06.967] [info] [webhooks.cpp:170] [1887] return total: {"id":3,"method":"sync_info","result":{"history_task_list":null,"offset":0,"script":"get_history_task","total":0}} +[2026-01-29 20:44:06.999] [warning] [webhooks.cpp:148] [1887] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-01-29 20:44:07.000] [info] [webhooks.cpp:170] [1887] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":5} +[2026-01-29 20:44:07.000] [info] [webhooks.cpp:170] [1887] return total: {"id":7,"result":{}} +[2026-01-29 20:44:07.002] [warning] [webhooks.cpp:148] [1887] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-01-29 20:44:07.002] [info] [webhooks.cpp:170] [1887] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":9} +[2026-01-29 20:44:07.003] [info] [device_ui_message_handle.cpp:237] [1887] Handling bind function request {"script":"get_device_info"} +[2026-01-29 20:44:07.004] [info] [webhooks.cpp:756] [1887] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-01-29 20:44:07.004] [info] [webhooks.cpp:170] [1887] return total: {"id":11,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-01-29 20:44:07.005] [info] [device_ui_message_handle.cpp:47] [1887] Handling sync info request {"region_code":0,"script":"set_region"} +[2026-01-29 20:44:07.005] [info] [device_ui_message_handle.cpp:111] [1887] Handling set region request 0 +[2026-01-29 20:44:07.005] [info] [device_ui_message_handle.cpp:114] [1887] Region is the same as current region: 0 +[2026-01-29 20:44:07.005] [info] [webhooks.cpp:787] [1887] return handle_sync_info: {"script":"set_region"} +[2026-01-29 20:44:07.006] [info] [webhooks.cpp:170] [1887] return total: {"id":13,"method":"sync_info","result":{"script":"set_region"}} +[2026-01-29 20:44:07.012] [info] [webhooks.cpp:170] [1887] return total: {"id":1,"result":{"eventtime":25.023970511,"status":null}} +[2026-01-29 20:44:07.014] [warning] [webhooks.cpp:148] [1887] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-01-29 20:44:07.015] [info] [webhooks.cpp:170] [1887] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":4} +[2026-01-29 20:44:07.016] [info] [device_ui_message_handle.cpp:303] [1887] Get Network access cfg: {"object":{"lan_status":false,"token":"","token_status":true}} +[2026-01-29 20:44:07.016] [info] [webhooks.cpp:744] [1887] return handle_get_network_access_cfg: {"object":{"lan_status":false,"token":"","token_status":true}} +[2026-01-29 20:44:07.017] [info] [webhooks.cpp:170] [1887] return total: {"id":8,"method":"get_network_access_cfg","result":{"object":{"lan_status":false,"token":"","token_status":true}}} +[2026-01-29 20:44:07.018] [info] [device_ui_message_handle.cpp:47] [1887] Handling sync info request {"script":"get_device_status"} +[2026-01-29 20:44:07.018] [info] [device_ui_message_handle.cpp:125] [1887] Handling get device status request +[2026-01-29 20:44:07.072] [info] [device_ui_message_handle.cpp:136] [1887] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":0},"script":"get_device_status"} +[2026-01-29 20:44:07.073] [info] [webhooks.cpp:787] [1887] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":0},"script":"get_device_status"} +[2026-01-29 20:44:07.073] [info] [webhooks.cpp:170] [1887] return total: {"id":12,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":0},"script":"get_device_status"}} +[2026-01-29 20:44:07.074] [info] [webhooks.cpp:170] [1887] return total: {"id":2,"result":{"eventtime":25.023970511,"status":null}} +[2026-01-29 20:44:07.468] [warning] [webhooks.cpp:148] [1887] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-01-29 20:44:07.469] [info] [webhooks.cpp:170] [1887] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":6} +[2026-01-29 20:44:07.469] [info] [device_ui_message_handle.cpp:47] [1887] Handling sync info request {"script":"set_status","status":0,"sub_status":0} +[2026-01-29 20:44:07.470] [info] [device_ui_message_handle.cpp:535] [1887] Setting status: 0, sub_status: 0 +[2026-01-29 20:44:07.470] [info] [device_status.cpp:1023] [1887] Set UI ready: false +[2026-01-29 20:44:07.470] [info] [webhooks.cpp:787] [1887] return handle_sync_info: {"script":"set_status"} +[2026-01-29 20:44:07.470] [info] [webhooks.cpp:170] [1887] return total: {"id":14,"method":"sync_info","result":{"script":"set_status"}} +[2026-01-29 20:44:07.957] [info] [dsp_helper.h:31] [1887] remoterpc_ctrl 1 +[2026-01-29 20:44:08.076] [warning] [webhooks.cpp:148] [1887] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-01-29 20:44:08.077] [info] [webhooks.cpp:170] [1887] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":10} +[2026-01-29 20:44:09.103] [info] [msgproto.cpp:606] [1887] create MessageParser success! +[2026-01-29 20:44:09.107] [info] [mcu.cpp:1049] [1887] MCU 'bed_sensor' restart power +[2026-01-29 20:44:09.516] [info] [mcu.cpp:1072] [1887] bootloader mode, try jump to app! +[2026-01-29 20:44:09.543] [info] [msgproto.cpp:606] [1887] create MessageParser success! +[2026-01-29 20:44:09.546] [info] [mcu.cpp:1049] [1887] MCU 'toolhead' restart power +[2026-01-29 20:44:09.956] [info] [mcu.cpp:1072] [1887] bootloader mode, try jump to app! +[2026-01-29 20:44:10.064] [info] [bed_mesh.cpp:1466] [1887] zero_ref_pos size 0 +[2026-01-29 20:44:10.099] [info] [bed_mesh.cpp:2722] [1887] ProfileManager profile->get_name bed_mesh +[2026-01-29 20:44:10.117] [info] [gcode_move.cpp:60] [1887] GCodeMove init! +[2026-01-29 20:44:10.159] [info] [gcode_move.cpp:119] [1887] GCodeMove init success!! +[2026-01-29 20:44:10.160] [info] [gcode_move.cpp:274] [1887] set_move_transform transform: force:false +[2026-01-29 20:44:10.250] [info] [print_stats.cpp:26] [1887] PrintStats init! +[2026-01-29 20:44:10.251] [info] [print_stats.cpp:55] [1887] PrintStats init success!! +[2026-01-29 20:44:10.251] [info] [print_stats.cpp:277] [1887] bed_mesh_exist:0x0000 +[2026-01-29 20:44:10.252] [info] [beep_ctrl.cpp:39] [1887] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[2026-01-29 20:44:10.253] [info] [beep_ctrl.cpp:137] [1887] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[2026-01-29 20:44:10.254] [info] [beep_ctrl.cpp:252] [1887] exec_cmd data 0 +[2026-01-29 20:44:10.256] [info] [beep_ctrl.cpp:171] [1887] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[2026-01-29 20:44:10.256] [info] [beep_ctrl.cpp:252] [1887] exec_cmd data 333333 +[2026-01-29 20:44:10.256] [info] [beep_ctrl.cpp:189] [1887] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[2026-01-29 20:44:10.256] [info] [beep_ctrl.cpp:252] [1887] exec_cmd data 166666 +[2026-01-29 20:44:10.256] [info] [beep_ctrl.cpp:207] [1887] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[2026-01-29 20:44:10.256] [info] [beep_ctrl.cpp:252] [1887] exec_cmd data normal +[2026-01-29 20:44:10.315] [info] [query_adc.cpp:36] [1887] QueryADC init success! +[2026-01-29 20:44:10.316] [info] [mmu.cpp:1442] [1887] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[2026-01-29 20:44:10.316] [info] [mmu.cpp:1460] [1887] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[2026-01-29 20:44:10.318] [info] [cavity_fan.cpp:36] [1887] PrinterFanCavity init! +[2026-01-29 20:44:10.319] [info] [cavity_fan.cpp:96] [1887] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[2026-01-29 20:44:10.320] [info] [cavity_fan.cpp:107] [1887] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[2026-01-29 20:44:10.320] [info] [cavity_fan.cpp:115] [1887] temp_drop_det_time 1 5 2 1.5 3 +[2026-01-29 20:44:10.334] [info] [fan.cpp:55] [1887] __func__:Fan #1 str_pin:PD17 +[2026-01-29 20:44:10.335] [info] [cavity_fan.cpp:119] [1887] PrinterFanCavity init success!! +[2026-01-29 20:44:10.336] [info] [stepper_enable.cpp:27] [1887] PrinterStepperEnable init! +[2026-01-29 20:44:10.338] [info] [fan.cpp:55] [1887] __func__:Fan #1 str_pin:PG15 +[2026-01-29 20:44:10.368] [info] [fan.cpp:55] [1887] __func__:Fan #1 str_pin:toolhead:PA8 +[2026-01-29 20:44:10.371] [info] [fan.cpp:55] [1887] __func__:Fan #1 str_pin:PD15 +[2026-01-29 20:44:10.382] [warning] [extras_factory.cpp:318] [1887] create extras: "g180_load_config" failer! +[2026-01-29 20:44:10.384] [info] [heater_bed.cpp:18] [1887] PrinterHeaterBed Init! +[2026-01-29 20:44:10.384] [info] [heaters.cpp:836] [1887] PrinterHeaters init! +[2026-01-29 20:44:10.386] [info] [heaters.cpp:861] [1887] PrinterHeaters init success! +[2026-01-29 20:44:10.425] [info] [heaters.cpp:897] [1887] c->get_name(): thermistor NTC 100K beta 3950 +[2026-01-29 20:44:10.426] [info] [thermistor.cpp:138] [1887] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[2026-01-29 20:44:10.426] [info] [heaters.cpp:897] [1887] c->get_name(): thermistor NTC 100K beta 3950 DSP +[2026-01-29 20:44:10.427] [info] [thermistor.cpp:138] [1887] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[2026-01-29 20:44:10.548] [info] [utilities.cpp:52] [1887] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[2026-01-29 20:44:10.549] [info] [thermistor.cpp:146] [1887] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[2026-01-29 20:44:10.550] [info] [heaters.cpp:897] [1887] c->get_name(): thermistor NTC 100K beta 4300 +[2026-01-29 20:44:10.550] [info] [thermistor.cpp:138] [1887] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[2026-01-29 20:44:10.551] [info] [heaters.cpp:897] [1887] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[2026-01-29 20:44:10.551] [info] [thermistor.cpp:138] [1887] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[2026-01-29 20:44:10.551] [info] [heaters.cpp:897] [1887] c->get_name(): thermistor NTC R25 350 +[2026-01-29 20:44:10.552] [info] [thermistor.cpp:138] [1887] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[2026-01-29 20:44:10.553] [info] [heaters.cpp:905] [1887] PrinterHeaters::load_config success! +[2026-01-29 20:44:10.553] [info] [heaters.cpp:994] [1887] setup_sensor success! +[2026-01-29 20:44:10.553] [info] [adc_temperature.cpp:29] [1887] __func__:PrinterADCtoTemperature name:heater_bed +[2026-01-29 20:44:10.554] [info] [adc_temperature.cpp:35] [1887] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[2026-01-29 20:44:10.554] [info] [adc_temperature.cpp:165] [1887] name:heater_bed +[2026-01-29 20:44:10.554] [info] [error_mcu.cpp:101] [1887] create PrinterMCUError success! +[2026-01-29 20:44:10.555] [info] [heaters.cpp:83] [1887] Heater init! name: heater_bed +[2026-01-29 20:44:10.556] [info] [heaters.cpp:119] [1887] __func__:Heater,heater_pin:PG13 +[2026-01-29 20:44:10.557] [info] [pid_calibrate.cpp:43] [1887] PIDCalibrate init success!! +[2026-01-29 20:44:10.558] [warning] [heaters.cpp:322] [1887] Heater init success!!!! +[2026-01-29 20:44:10.559] [warning] [heaters.cpp:947] [1887] debug name heater_bed, gcode_id B +[2026-01-29 20:44:10.560] [info] [heater_bed.cpp:41] [1887] PrinterHeaterBed Init success! +[2026-01-29 20:44:10.560] [info] [heater_fan.cpp:24] [1887] PrinterHeaterFan init! +[2026-01-29 20:44:10.561] [info] [fan.cpp:55] [1887] __func__:Fan #1 str_pin:toolhead:PB13 +[2026-01-29 20:44:10.562] [info] [heater_fan.cpp:46] [1887] PrinterHeaterFan init success!! +[2026-01-29 20:44:10.565] [info] [idle_timeout.cpp:28] [1887] init IdleTimeout ... +[2026-01-29 20:44:10.567] [info] [idle_timeout.cpp:72] [1887] init IdleTimeout success !!! +[2026-01-29 20:44:10.623] [info] [bulk_sensor.cpp:312] [1887] unpack_fmt:len:12,params['clock']:4200154895,params['static_string_id']:19 mcu mcu 'mcu': shutdown! +[2026-01-29 20:47:03.110] [info] [config_manager.cpp:338] [1887] save supplement info success +[2026-01-29 20:47:03.111] [error] [mcu.cpp:1488] [1966] mcu mcu clock32 4200154895 clock64 4200154895 shutdown id 19 msg shutdown_pins +[2026-01-29 20:47:03.114] [info] [config_manager.cpp:474] [1887] save persistent supplement info success +[2026-01-29 20:47:03.114] [info] [virtual_sdcard.cpp:359] [1887] start saving print process data. +[2026-01-29 20:47:03.115] [info] [virtual_sdcard.cpp:397] [1887] handle_power_outage No data needs to be saved before the actual printing. +[2026-01-29 20:47:03.115] [warning] [por.cpp:225] [1887] por:power_off handle done +[1970-01-01 08:00:24.937] [info] [logger.cpp:80] [1884] elegoo log init finish! +[1970-01-01 08:00:24.985] [info] [main.cpp:209] [1884] inputtty:./config/printer,gcode_fd:4 +[1970-01-01 08:00:25.166] [info] [main.cpp:226] [1884] Starting Elegoo... +[1970-01-01 08:00:25.166] [info] [main.cpp:228] [1884] start_args.size:17,sizeof(long_options):9 +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[img_version]:00.00.00.00 +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[gui_version]:01.01.11.03 +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[elegoo_version]:12.26.19.32 +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[camera_version]:00.00.00.00 +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[canvas_version]:00.00.00.00 +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[ota_version]:01.03.01.89 +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[bed_sensor_version]:00.00.00.00 +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[start_reason]:startup +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[apiserver]:/tmp/elegoo_uds +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[toolhead_gd32_version]:00.00.00.00 +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[autosave_file]:/opt/usr/cfg/autosave.cfg +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[gcode_fd]:4 +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[config_file]:/opt/inst/printer_dsp.cfg +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[cpu_info]:2 core ARMv7 Processor rev 5 (v7l) +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[mcu_gd32_version]:00.00.00.00 +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[machine_model]:Centauri Carbon 2 +[1970-01-01 08:00:25.166] [info] [main.cpp:231] [1884] start_args[os_version]:01.02.12.01 +[1970-01-01 08:00:25.166] [info] [main.cpp:236] [1884] long_options[debuginput]:i +[1970-01-01 08:00:25.166] [info] [main.cpp:236] [1884] long_options[input-tty]:I +[1970-01-01 08:00:25.166] [info] [main.cpp:236] [1884] long_options[api-server]:a +[1970-01-01 08:00:25.166] [info] [main.cpp:236] [1884] long_options[logfile]:l +[1970-01-01 08:00:25.166] [info] [main.cpp:236] [1884] long_options[verbose]:v +[1970-01-01 08:00:25.166] [info] [main.cpp:236] [1884] long_options[debugoutput]:o +[1970-01-01 08:00:25.166] [info] [main.cpp:236] [1884] long_options[dictionary]:d +[1970-01-01 08:00:25.166] [info] [main.cpp:236] [1884] long_options[import-test]:t +[1970-01-01 08:00:25.167] [info] [printer.cpp:50] [1884] create Printer success! +[1970-01-01 08:00:25.167] [info] [printer.cpp:365] [1884] connect begin! +[1970-01-01 08:00:25.167] [info] [printer.cpp:284] [1884] read_config begin! +[1970-01-01 08:00:25.232] [info] [webhooks.cpp:595] [1884] create WebHooks success! +[1970-01-01 08:00:25.233] [info] [webhooks.cpp:384] [1884] create ServerSocket success! /tmp/elegoo_uds +[1970-01-01 08:00:25.233] [info] [webhooks.cpp:443] [1884] create ServerSocket success! +[1970-01-01 08:00:25.538] [info] [config_manager.cpp:162] [1884] begin read sn info +[1970-01-01 08:00:25.539] [info] [config_manager.cpp:196] [1884] read product auth success +[1970-01-01 08:00:25.540] [info] [config_manager.cpp:144] [1884] machine: {"machine":{"model":"Centauri Carbon 2"},"versions":[{"os_version":"01.02.12.01"},{"mcu_gd32_version":"00.00.00.00"},{"toolhead_gd32_version":"00.00.00.00"},{"bed_sensor_version":"00.00.00.00"},{"canvas_version":"00.00.00.00"},{"camera_version":"00.00.00.00"},{"elegoo_version":"12.26.19.32"},{"gui_version":"01.01.11.03"},{"ota_version":"01.03.01.89"},{"img_version":"00.00.00.00"}]} +[1970-01-01 08:00:25.583] [info] [config_manager.cpp:150] [1884] parse machine model from sn: Centauri Carbon 2 +[1970-01-01 08:00:25.584] [info] [config_manager.cpp:200] [1884] begin read supplement info +[1970-01-01 08:00:25.670] [info] [config_manager.cpp:283] [1884] token info: token: miM2yt, token_switch_enabled: true, is_lan_mode: false, power_outage_resume_enabled: true, region: 0 +[1970-01-01 08:00:25.673] [info] [config_manager.cpp:441] [1884] load persistent supplement info success +[1970-01-01 08:00:25.769] [info] [device_status.cpp:132] [1884] Create component manager for Centauri Carbon 2 +[1970-01-01 08:00:26.026] [info] [sql_database.cpp:164] [1884] Delete SQL: DELETE FROM file_details WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_details GROUP BY filename HAVING MAX(create_time)); +[1970-01-01 08:00:26.028] [info] [sql_database.cpp:164] [1884] Delete SQL: DELETE FROM file_thumbnail WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_thumbnail GROUP BY filename); +[1970-01-01 08:00:26.033] [info] [record_manager.cpp:302] [1884] Loaded 0 tasks from the database. +[1970-01-01 08:00:26.034] [info] [record_manager.cpp:318] [1884] Loaded 8 files from the database. +[1970-01-01 08:00:26.035] [info] [record_manager.cpp:323] [1884] Loaded 8 thumbnails from the database. +[1970-01-01 08:00:26.062] [info] [record_manager.cpp:328] [1884] Loaded 0 delete file records from the database. +[1970-01-01 08:00:26.062] [info] [record_manager.cpp:333] [1884] Loaded 0 exception messages from the database. +[1970-01-01 08:00:26.070] [info] [record_manager.cpp:820] [1884] File exists: /opt/usr/gcode/local/ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[1970-01-01 08:00:26.071] [info] [record_manager.cpp:820] [1884] File exists: /opt/usr/gcode/local/ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[1970-01-01 08:00:26.072] [info] [record_manager.cpp:820] [1884] File exists: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[1970-01-01 08:00:26.072] [info] [record_manager.cpp:820] [1884] File exists: /opt/usr/gcode/local/ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[1970-01-01 08:00:26.073] [info] [record_manager.cpp:820] [1884] File exists: /opt/usr/gcode/local/ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[1970-01-01 08:00:26.074] [info] [record_manager.cpp:820] [1884] File exists: /opt/usr/gcode/local/ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[1970-01-01 08:00:26.074] [info] [record_manager.cpp:820] [1884] File exists: /opt/usr/gcode/local/ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[1970-01-01 08:00:26.075] [info] [record_manager.cpp:820] [1884] File exists: /opt/usr/gcode/local/ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[1970-01-01 08:00:26.075] [info] [record_manager.cpp:365] [1884] RecordManager initialized successfully. +[1970-01-01 08:00:26.132] [info] [pins.cpp:112] [1884] create PrinterPins success! +[1970-01-01 08:00:26.158] [info] [msgproto.cpp:606] [1884] create MessageParser success! +[1970-01-01 08:00:26.159] [info] [mcu.cpp:1963] [1884] restart_via_remoterpc +[1970-01-01 08:00:26.159] [error] [serialhdl.cpp:309] [1884] SerialReader::disconnect() +[1970-01-01 08:00:26.159] [info] [dsp_helper.h:31] [1884] remoterpc_ctrl 0 +[1970-01-01 08:00:26.160] [info] [webhooks.cpp:56] [1884] webhooks client 11751396: New connection +[1970-01-01 08:00:26.167] [info] [webhooks.cpp:1213] [1884] handle_query is_subscribe true : {"canvas_dev":["canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[1970-01-01 08:00:26.168] [info] [webhooks.cpp:1213] [1884] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[1970-01-01 08:00:26.168] [info] [device_ui_message_handle.cpp:47] [1884] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[1970-01-01 08:00:26.169] [info] [device_ui_message_handle.cpp:485] [1884] Total tasks: 0 +[1970-01-01 08:00:26.169] [info] [webhooks.cpp:787] [1884] return handle_sync_info: {"history_task_list":null,"offset":0,"script":"get_history_task","total":0} +[1970-01-01 08:00:26.169] [info] [webhooks.cpp:170] [1884] return total: {"id":3,"method":"sync_info","result":{"history_task_list":null,"offset":0,"script":"get_history_task","total":0}} +[1970-01-01 08:00:26.203] [warning] [webhooks.cpp:148] [1884] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:26.204] [info] [webhooks.cpp:170] [1884] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":5} +[1970-01-01 08:00:26.205] [info] [webhooks.cpp:170] [1884] return total: {"id":7,"result":{}} +[1970-01-01 08:00:26.207] [warning] [webhooks.cpp:148] [1884] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:26.207] [info] [webhooks.cpp:170] [1884] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":9} +[1970-01-01 08:00:26.208] [info] [device_ui_message_handle.cpp:237] [1884] Handling bind function request {"script":"get_device_info"} +[1970-01-01 08:00:26.209] [info] [webhooks.cpp:756] [1884] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[1970-01-01 08:00:26.209] [info] [webhooks.cpp:170] [1884] return total: {"id":11,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[1970-01-01 08:00:26.210] [info] [device_ui_message_handle.cpp:47] [1884] Handling sync info request {"region_code":0,"script":"set_region"} +[1970-01-01 08:00:26.210] [info] [device_ui_message_handle.cpp:111] [1884] Handling set region request 0 +[1970-01-01 08:00:26.211] [info] [device_ui_message_handle.cpp:114] [1884] Region is the same as current region: 0 +[1970-01-01 08:00:26.211] [info] [webhooks.cpp:787] [1884] return handle_sync_info: {"script":"set_region"} +[1970-01-01 08:00:26.211] [info] [webhooks.cpp:170] [1884] return total: {"id":13,"method":"sync_info","result":{"script":"set_region"}} +[1970-01-01 08:00:26.219] [info] [webhooks.cpp:170] [1884] return total: {"id":1,"result":{"eventtime":24.377528261,"status":null}} +[1970-01-01 08:00:26.221] [warning] [webhooks.cpp:148] [1884] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:26.222] [info] [webhooks.cpp:170] [1884] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":4} +[1970-01-01 08:00:26.223] [info] [device_ui_message_handle.cpp:303] [1884] Get Network access cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[1970-01-01 08:00:26.223] [info] [webhooks.cpp:744] [1884] return handle_get_network_access_cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[1970-01-01 08:00:26.223] [info] [webhooks.cpp:170] [1884] return total: {"id":8,"method":"get_network_access_cfg","result":{"object":{"lan_status":false,"token":"miM2yt","token_status":true}}} +[1970-01-01 08:00:26.224] [info] [device_ui_message_handle.cpp:47] [1884] Handling sync info request {"script":"get_device_status"} +[1970-01-01 08:00:26.225] [info] [device_ui_message_handle.cpp:125] [1884] Handling get device status request +[1970-01-01 08:00:26.302] [info] [device_ui_message_handle.cpp:136] [1884] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":0},"script":"get_device_status"} +[1970-01-01 08:00:26.302] [info] [webhooks.cpp:787] [1884] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":0},"script":"get_device_status"} +[1970-01-01 08:00:26.303] [info] [webhooks.cpp:170] [1884] return total: {"id":12,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":0},"script":"get_device_status"}} +[1970-01-01 08:00:26.305] [info] [webhooks.cpp:170] [1884] return total: {"id":2,"result":{"eventtime":24.377528261,"status":null}} +[1970-01-01 08:00:26.671] [warning] [webhooks.cpp:148] [1884] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:26.673] [info] [webhooks.cpp:170] [1884] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":6} +[1970-01-01 08:00:26.674] [info] [device_ui_message_handle.cpp:47] [1884] Handling sync info request {"script":"set_status","status":0,"sub_status":0} +[1970-01-01 08:00:26.703] [info] [device_ui_message_handle.cpp:535] [1884] Setting status: 0, sub_status: 0 +[1970-01-01 08:00:26.703] [info] [device_status.cpp:1023] [1884] Set UI ready: false +[1970-01-01 08:00:26.703] [info] [webhooks.cpp:787] [1884] return handle_sync_info: {"script":"set_status"} +[1970-01-01 08:00:26.703] [info] [webhooks.cpp:170] [1884] return total: {"id":14,"method":"sync_info","result":{"script":"set_status"}} +[1970-01-01 08:00:27.160] [info] [dsp_helper.h:31] [1884] remoterpc_ctrl 1 +[1970-01-01 08:00:27.275] [warning] [webhooks.cpp:148] [1884] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:27.276] [info] [webhooks.cpp:170] [1884] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":10} +[1970-01-01 08:00:28.276] [info] [msgproto.cpp:606] [1884] create MessageParser success! +[1970-01-01 08:00:28.279] [info] [mcu.cpp:1049] [1884] MCU 'bed_sensor' restart power +[1970-01-01 08:00:28.689] [info] [mcu.cpp:1072] [1884] bootloader mode, try jump to app! +[1970-01-01 08:00:28.712] [info] [msgproto.cpp:606] [1884] create MessageParser success! +[1970-01-01 08:00:28.714] [info] [mcu.cpp:1049] [1884] MCU 'toolhead' restart power +[1970-01-01 08:00:29.124] [info] [mcu.cpp:1072] [1884] bootloader mode, try jump to app! +[1970-01-01 08:00:29.181] [info] [bed_mesh.cpp:1466] [1884] zero_ref_pos size 0 +[1970-01-01 08:00:29.218] [info] [bed_mesh.cpp:2722] [1884] ProfileManager profile->get_name bed_mesh +[1970-01-01 08:00:29.236] [info] [gcode_move.cpp:60] [1884] GCodeMove init! +[1970-01-01 08:00:29.277] [info] [gcode_move.cpp:119] [1884] GCodeMove init success!! +[1970-01-01 08:00:29.277] [info] [gcode_move.cpp:274] [1884] set_move_transform transform: force:false +[1970-01-01 08:00:29.345] [info] [print_stats.cpp:26] [1884] PrintStats init! +[1970-01-01 08:00:29.346] [info] [print_stats.cpp:55] [1884] PrintStats init success!! +[1970-01-01 08:00:29.347] [info] [print_stats.cpp:277] [1884] bed_mesh_exist:0x0000 +[1970-01-01 08:00:29.347] [info] [beep_ctrl.cpp:39] [1884] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[1970-01-01 08:00:29.349] [info] [beep_ctrl.cpp:137] [1884] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[1970-01-01 08:00:29.350] [info] [beep_ctrl.cpp:252] [1884] exec_cmd data 0 +[1970-01-01 08:00:29.352] [info] [beep_ctrl.cpp:171] [1884] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[1970-01-01 08:00:29.353] [info] [beep_ctrl.cpp:252] [1884] exec_cmd data 333333 +[1970-01-01 08:00:29.353] [info] [beep_ctrl.cpp:189] [1884] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[1970-01-01 08:00:29.354] [info] [beep_ctrl.cpp:252] [1884] exec_cmd data 166666 +[1970-01-01 08:00:29.354] [info] [beep_ctrl.cpp:207] [1884] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[1970-01-01 08:00:29.354] [info] [beep_ctrl.cpp:252] [1884] exec_cmd data normal +[1970-01-01 08:00:29.357] [info] [query_adc.cpp:36] [1884] QueryADC init success! +[1970-01-01 08:00:29.361] [info] [mmu.cpp:1442] [1884] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[1970-01-01 08:00:29.362] [info] [mmu.cpp:1460] [1884] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[1970-01-01 08:00:29.364] [info] [cavity_fan.cpp:36] [1884] PrinterFanCavity init! +[1970-01-01 08:00:29.365] [info] [cavity_fan.cpp:96] [1884] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[1970-01-01 08:00:29.366] [info] [cavity_fan.cpp:107] [1884] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[1970-01-01 08:00:29.366] [info] [cavity_fan.cpp:115] [1884] temp_drop_det_time 1 5 2 1.5 3 +[1970-01-01 08:00:29.366] [info] [fan.cpp:55] [1884] __func__:Fan #1 str_pin:PD17 +[1970-01-01 08:00:29.368] [info] [cavity_fan.cpp:119] [1884] PrinterFanCavity init success!! +[1970-01-01 08:00:29.369] [info] [stepper_enable.cpp:27] [1884] PrinterStepperEnable init! +[1970-01-01 08:00:29.371] [info] [fan.cpp:55] [1884] __func__:Fan #1 str_pin:PG15 +[1970-01-01 08:00:29.374] [info] [fan.cpp:55] [1884] __func__:Fan #1 str_pin:toolhead:PA8 +[1970-01-01 08:00:29.376] [info] [fan.cpp:55] [1884] __func__:Fan #1 str_pin:PD15 +[1970-01-01 08:00:29.388] [warning] [extras_factory.cpp:318] [1884] create extras: "g180_load_config" failer! +[1970-01-01 08:00:29.390] [info] [heater_bed.cpp:18] [1884] PrinterHeaterBed Init! +[1970-01-01 08:00:29.391] [info] [heaters.cpp:836] [1884] PrinterHeaters init! +[1970-01-01 08:00:29.393] [info] [heaters.cpp:861] [1884] PrinterHeaters init success! +[1970-01-01 08:00:29.455] [info] [heaters.cpp:897] [1884] c->get_name(): thermistor NTC 100K beta 3950 +[1970-01-01 08:00:29.456] [info] [thermistor.cpp:138] [1884] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[1970-01-01 08:00:29.457] [info] [heaters.cpp:897] [1884] c->get_name(): thermistor NTC 100K beta 3950 DSP +[1970-01-01 08:00:29.458] [info] [thermistor.cpp:138] [1884] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[1970-01-01 08:00:29.584] [info] [utilities.cpp:52] [1884] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[1970-01-01 08:00:29.586] [info] [thermistor.cpp:146] [1884] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[1970-01-01 08:00:29.586] [info] [heaters.cpp:897] [1884] c->get_name(): thermistor NTC 100K beta 4300 +[1970-01-01 08:00:29.587] [info] [thermistor.cpp:138] [1884] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[1970-01-01 08:00:29.587] [info] [heaters.cpp:897] [1884] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[1970-01-01 08:00:29.587] [info] [thermistor.cpp:138] [1884] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[1970-01-01 08:00:29.588] [info] [heaters.cpp:897] [1884] c->get_name(): thermistor NTC R25 350 +[1970-01-01 08:00:29.588] [info] [thermistor.cpp:138] [1884] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[1970-01-01 08:00:29.589] [info] [heaters.cpp:905] [1884] PrinterHeaters::load_config success! +[1970-01-01 08:00:29.589] [info] [heaters.cpp:994] [1884] setup_sensor success! +[1970-01-01 08:00:29.589] [info] [adc_temperature.cpp:29] [1884] __func__:PrinterADCtoTemperature name:heater_bed +[1970-01-01 08:00:29.589] [info] [adc_temperature.cpp:35] [1884] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[1970-01-01 08:00:29.590] [info] [adc_temperature.cpp:165] [1884] name:heater_bed +[1970-01-01 08:00:29.590] [info] [error_mcu.cpp:101] [1884] create PrinterMCUError success! +[1970-01-01 08:00:29.591] [info] [heaters.cpp:83] [1884] Heater init! name: heater_bed +[1970-01-01 08:00:29.592] [info] [heaters.cpp:119] [1884] __func__:Heater,heater_pin:PG13 +[1970-01-01 08:00:29.593] [info] [pid_calibrate.cpp:43] [1884] PIDCalibrate init success!! +[1970-01-01 08:00:29.594] [warning] [heaters.cpp:322] [1884] Heater init success!!!! +[1970-01-01 08:00:29.595] [warning] [heaters.cpp:947] [1884] debug name heater_bed, gcode_id B +[1970-01-01 08:00:29.595] [info] [heater_bed.cpp:41] [1884] PrinterHeaterBed Init success! +[1970-01-01 08:00:29.596] [info] [heater_fan.cpp:24] [1884] PrinterHeaterFan init! +[1970-01-01 08:00:29.596] [info] [fan.cpp:55] [1884] __func__:Fan #1 str_pin:toolhead:PB13 +[1970-01-01 08:00:29.597] [info] [heater_fan.cpp:46] [1884] PrinterHeaterFan init success!! +[1970-01-01 08:00:29.600] [info] [idle_timeout.cpp:28] [1884] init IdleTimeout ... +[1970-01-01 08:00:29.602] [info] [idle_timeout.cpp:72] [1884] init IdleTimeout success !!! +[1970-01-01 08:00:29.606] [info] [bulk_sensor.cpp:312] [1884] unpack_fmt:len:12,params['clock']:3305019863,params['static_string_id']:19 mcu mcu 'mcu': shutdown! +[1970-01-01 08:05:43.968] [info] [config_manager.cpp:338] [1884] save supplement info success +[1970-01-01 08:05:43.969] [error] [mcu.cpp:1488] [1958] mcu mcu clock32 3305019863 clock64 7599987159 shutdown id 19 msg shutdown_pins +[1970-01-01 08:05:43.970] [info] [config_manager.cpp:474] [1884] save persistent supplement info success +[1970-01-01 08:05:43.970] [info] [virtual_sdcard.cpp:359] [1884] start saving print process data. +[1970-01-01 08:05:43.971] [info] [virtual_sdcard.cpp:397] [1884] handle_power_outage No data needs to be saved before the actual printing. +[1970-01-01 08:05:43.972] [warning] [por.cpp:225] [1884] por:power_off handle done +[1970-01-01 08:00:24.816] [info] [logger.cpp:80] [1884] elegoo log init finish! +[1970-01-01 08:00:24.862] [info] [main.cpp:209] [1884] inputtty:./config/printer,gcode_fd:4 +[1970-01-01 08:00:25.044] [info] [main.cpp:226] [1884] Starting Elegoo... +[1970-01-01 08:00:25.044] [info] [main.cpp:228] [1884] start_args.size:17,sizeof(long_options):9 +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[img_version]:00.00.00.00 +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[gui_version]:01.01.11.03 +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[elegoo_version]:12.26.19.32 +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[camera_version]:00.00.00.00 +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[canvas_version]:00.00.00.00 +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[ota_version]:01.03.01.89 +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[bed_sensor_version]:00.00.00.00 +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[start_reason]:startup +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[apiserver]:/tmp/elegoo_uds +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[toolhead_gd32_version]:00.00.00.00 +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[autosave_file]:/opt/usr/cfg/autosave.cfg +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[gcode_fd]:4 +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[config_file]:/opt/inst/printer_dsp.cfg +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[cpu_info]:2 core ARMv7 Processor rev 5 (v7l) +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[mcu_gd32_version]:00.00.00.00 +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[machine_model]:Centauri Carbon 2 +[1970-01-01 08:00:25.044] [info] [main.cpp:231] [1884] start_args[os_version]:01.02.12.01 +[1970-01-01 08:00:25.044] [info] [main.cpp:236] [1884] long_options[debuginput]:i +[1970-01-01 08:00:25.044] [info] [main.cpp:236] [1884] long_options[input-tty]:I +[1970-01-01 08:00:25.044] [info] [main.cpp:236] [1884] long_options[api-server]:a +[1970-01-01 08:00:25.044] [info] [main.cpp:236] [1884] long_options[logfile]:l +[1970-01-01 08:00:25.044] [info] [main.cpp:236] [1884] long_options[verbose]:v +[1970-01-01 08:00:25.044] [info] [main.cpp:236] [1884] long_options[debugoutput]:o +[1970-01-01 08:00:25.045] [info] [main.cpp:236] [1884] long_options[dictionary]:d +[1970-01-01 08:00:25.045] [info] [main.cpp:236] [1884] long_options[import-test]:t +[1970-01-01 08:00:25.045] [info] [printer.cpp:50] [1884] create Printer success! +[1970-01-01 08:00:25.045] [info] [printer.cpp:365] [1884] connect begin! +[1970-01-01 08:00:25.045] [info] [printer.cpp:284] [1884] read_config begin! +[1970-01-01 08:00:25.103] [info] [webhooks.cpp:595] [1884] create WebHooks success! +[1970-01-01 08:00:25.104] [info] [webhooks.cpp:384] [1884] create ServerSocket success! /tmp/elegoo_uds +[1970-01-01 08:00:25.104] [info] [webhooks.cpp:443] [1884] create ServerSocket success! +[1970-01-01 08:00:25.412] [info] [config_manager.cpp:162] [1884] begin read sn info +[1970-01-01 08:00:25.412] [info] [config_manager.cpp:196] [1884] read product auth success +[1970-01-01 08:00:25.414] [info] [config_manager.cpp:144] [1884] machine: {"machine":{"model":"Centauri Carbon 2"},"versions":[{"os_version":"01.02.12.01"},{"mcu_gd32_version":"00.00.00.00"},{"toolhead_gd32_version":"00.00.00.00"},{"bed_sensor_version":"00.00.00.00"},{"canvas_version":"00.00.00.00"},{"camera_version":"00.00.00.00"},{"elegoo_version":"12.26.19.32"},{"gui_version":"01.01.11.03"},{"ota_version":"01.03.01.89"},{"img_version":"00.00.00.00"}]} +[1970-01-01 08:00:25.455] [info] [config_manager.cpp:150] [1884] parse machine model from sn: Centauri Carbon 2 +[1970-01-01 08:00:25.456] [info] [config_manager.cpp:200] [1884] begin read supplement info +[1970-01-01 08:00:25.540] [info] [config_manager.cpp:283] [1884] token info: token: miM2yt, token_switch_enabled: true, is_lan_mode: false, power_outage_resume_enabled: true, region: 1 +[1970-01-01 08:00:25.543] [info] [config_manager.cpp:441] [1884] load persistent supplement info success +[1970-01-01 08:00:25.621] [info] [device_status.cpp:132] [1884] Create component manager for Centauri Carbon 2 +[1970-01-01 08:00:25.844] [info] [sql_database.cpp:164] [1884] Delete SQL: DELETE FROM file_details WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_details GROUP BY filename HAVING MAX(create_time)); +[1970-01-01 08:00:25.846] [info] [sql_database.cpp:164] [1884] Delete SQL: DELETE FROM file_thumbnail WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_thumbnail GROUP BY filename); +[1970-01-01 08:00:25.849] [info] [record_manager.cpp:302] [1884] Loaded 0 tasks from the database. +[1970-01-01 08:00:25.851] [info] [record_manager.cpp:318] [1884] Loaded 8 files from the database. +[1970-01-01 08:00:25.852] [info] [record_manager.cpp:323] [1884] Loaded 8 thumbnails from the database. +[1970-01-01 08:00:25.879] [info] [record_manager.cpp:328] [1884] Loaded 0 delete file records from the database. +[1970-01-01 08:00:25.880] [info] [record_manager.cpp:333] [1884] Loaded 0 exception messages from the database. +[1970-01-01 08:00:25.883] [info] [record_manager.cpp:820] [1884] File exists: /opt/usr/gcode/local/ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[1970-01-01 08:00:25.884] [info] [record_manager.cpp:820] [1884] File exists: /opt/usr/gcode/local/ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[1970-01-01 08:00:25.885] [info] [record_manager.cpp:820] [1884] File exists: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[1970-01-01 08:00:25.886] [info] [record_manager.cpp:820] [1884] File exists: /opt/usr/gcode/local/ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[1970-01-01 08:00:25.886] [info] [record_manager.cpp:820] [1884] File exists: /opt/usr/gcode/local/ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[1970-01-01 08:00:25.887] [info] [record_manager.cpp:820] [1884] File exists: /opt/usr/gcode/local/ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[1970-01-01 08:00:25.888] [info] [record_manager.cpp:820] [1884] File exists: /opt/usr/gcode/local/ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[1970-01-01 08:00:25.889] [info] [record_manager.cpp:820] [1884] File exists: /opt/usr/gcode/local/ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[1970-01-01 08:00:25.889] [info] [record_manager.cpp:365] [1884] RecordManager initialized successfully. +[1970-01-01 08:00:25.890] [info] [pins.cpp:112] [1884] create PrinterPins success! +[1970-01-01 08:00:25.943] [info] [msgproto.cpp:606] [1884] create MessageParser success! +[1970-01-01 08:00:25.944] [info] [mcu.cpp:1963] [1884] restart_via_remoterpc +[1970-01-01 08:00:25.944] [error] [serialhdl.cpp:309] [1884] SerialReader::disconnect() +[1970-01-01 08:00:25.944] [info] [dsp_helper.h:31] [1884] remoterpc_ctrl 0 +[1970-01-01 08:00:25.945] [info] [webhooks.cpp:56] [1884] webhooks client 17235924: New connection +[1970-01-01 08:00:25.951] [info] [webhooks.cpp:1213] [1884] handle_query is_subscribe true : {"canvas_dev":["canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[1970-01-01 08:00:25.953] [info] [webhooks.cpp:1213] [1884] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[1970-01-01 08:00:25.953] [info] [device_ui_message_handle.cpp:47] [1884] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[1970-01-01 08:00:25.954] [info] [device_ui_message_handle.cpp:485] [1884] Total tasks: 0 +[1970-01-01 08:00:25.954] [info] [webhooks.cpp:787] [1884] return handle_sync_info: {"history_task_list":null,"offset":0,"script":"get_history_task","total":0} +[1970-01-01 08:00:25.954] [info] [webhooks.cpp:170] [1884] return total: {"id":3,"method":"sync_info","result":{"history_task_list":null,"offset":0,"script":"get_history_task","total":0}} +[1970-01-01 08:00:25.957] [warning] [webhooks.cpp:148] [1884] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:25.957] [info] [webhooks.cpp:170] [1884] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":5} +[1970-01-01 08:00:25.958] [info] [webhooks.cpp:170] [1884] return total: {"id":7,"result":{}} +[1970-01-01 08:00:25.959] [warning] [webhooks.cpp:148] [1884] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:25.960] [info] [webhooks.cpp:170] [1884] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":9} +[1970-01-01 08:00:25.960] [info] [device_ui_message_handle.cpp:237] [1884] Handling bind function request {"script":"get_device_info"} +[1970-01-01 08:00:25.961] [info] [webhooks.cpp:756] [1884] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[1970-01-01 08:00:25.961] [info] [webhooks.cpp:170] [1884] return total: {"id":11,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[1970-01-01 08:00:25.962] [info] [device_ui_message_handle.cpp:47] [1884] Handling sync info request {"region_code":1,"script":"set_region"} +[1970-01-01 08:00:25.963] [info] [device_ui_message_handle.cpp:111] [1884] Handling set region request 1 +[1970-01-01 08:00:25.963] [info] [device_ui_message_handle.cpp:114] [1884] Region is the same as current region: 1 +[1970-01-01 08:00:25.963] [info] [webhooks.cpp:787] [1884] return handle_sync_info: {"script":"set_region"} +[1970-01-01 08:00:25.963] [info] [webhooks.cpp:170] [1884] return total: {"id":13,"method":"sync_info","result":{"script":"set_region"}} +[1970-01-01 08:00:25.969] [info] [webhooks.cpp:170] [1884] return total: {"id":1,"result":{"eventtime":24.161297094,"status":null}} +[1970-01-01 08:00:25.971] [warning] [webhooks.cpp:148] [1884] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:25.972] [info] [webhooks.cpp:170] [1884] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":4} +[1970-01-01 08:00:25.972] [info] [device_ui_message_handle.cpp:303] [1884] Get Network access cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[1970-01-01 08:00:25.972] [info] [webhooks.cpp:744] [1884] return handle_get_network_access_cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[1970-01-01 08:00:25.973] [info] [webhooks.cpp:170] [1884] return total: {"id":8,"method":"get_network_access_cfg","result":{"object":{"lan_status":false,"token":"miM2yt","token_status":true}}} +[1970-01-01 08:00:25.974] [info] [device_ui_message_handle.cpp:47] [1884] Handling sync info request {"script":"get_device_status"} +[1970-01-01 08:00:25.974] [info] [device_ui_message_handle.cpp:125] [1884] Handling get device status request +[1970-01-01 08:00:26.023] [info] [device_ui_message_handle.cpp:136] [1884] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[1970-01-01 08:00:26.024] [info] [webhooks.cpp:787] [1884] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[1970-01-01 08:00:26.024] [info] [webhooks.cpp:170] [1884] return total: {"id":12,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[1970-01-01 08:00:26.026] [info] [webhooks.cpp:170] [1884] return total: {"id":2,"result":{"eventtime":24.161297094,"status":null}} +[1970-01-01 08:00:26.456] [warning] [webhooks.cpp:148] [1884] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:26.456] [info] [webhooks.cpp:170] [1884] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":6} +[1970-01-01 08:00:26.456] [info] [device_ui_message_handle.cpp:47] [1884] Handling sync info request {"script":"set_status","status":0,"sub_status":0} +[1970-01-01 08:00:26.488] [info] [device_ui_message_handle.cpp:535] [1884] Setting status: 0, sub_status: 0 +[1970-01-01 08:00:26.488] [info] [device_status.cpp:1023] [1884] Set UI ready: false +[1970-01-01 08:00:26.489] [info] [webhooks.cpp:787] [1884] return handle_sync_info: {"script":"set_status"} +[1970-01-01 08:00:26.489] [info] [webhooks.cpp:170] [1884] return total: {"id":14,"method":"sync_info","result":{"script":"set_status"}} +[1970-01-01 08:00:26.945] [info] [dsp_helper.h:31] [1884] remoterpc_ctrl 1 +[1970-01-01 08:00:27.060] [warning] [webhooks.cpp:148] [1884] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:27.061] [info] [webhooks.cpp:170] [1884] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":10} +[1970-01-01 08:00:28.062] [info] [msgproto.cpp:606] [1884] create MessageParser success! +[1970-01-01 08:00:28.063] [info] [mcu.cpp:1049] [1884] MCU 'bed_sensor' restart power +[1970-01-01 08:00:28.473] [info] [mcu.cpp:1072] [1884] bootloader mode, try jump to app! +[1970-01-01 08:00:28.503] [info] [msgproto.cpp:606] [1884] create MessageParser success! +[1970-01-01 08:00:28.505] [info] [mcu.cpp:1049] [1884] MCU 'toolhead' restart power +[1970-01-01 08:00:28.915] [info] [mcu.cpp:1072] [1884] bootloader mode, try jump to app! +[1970-01-01 08:00:28.973] [info] [bed_mesh.cpp:1466] [1884] zero_ref_pos size 0 +[1970-01-01 08:00:29.010] [info] [bed_mesh.cpp:2722] [1884] ProfileManager profile->get_name bed_mesh +[1970-01-01 08:00:29.013] [info] [gcode_move.cpp:60] [1884] GCodeMove init! +[1970-01-01 08:00:29.055] [info] [gcode_move.cpp:119] [1884] GCodeMove init success!! +[1970-01-01 08:00:29.055] [info] [gcode_move.cpp:274] [1884] set_move_transform transform: force:false +[1970-01-01 08:00:29.115] [info] [print_stats.cpp:26] [1884] PrintStats init! +[1970-01-01 08:00:29.116] [info] [print_stats.cpp:55] [1884] PrintStats init success!! +[1970-01-01 08:00:29.116] [info] [print_stats.cpp:277] [1884] bed_mesh_exist:0x0000 +[1970-01-01 08:00:29.117] [info] [beep_ctrl.cpp:39] [1884] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[1970-01-01 08:00:29.119] [info] [beep_ctrl.cpp:137] [1884] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[1970-01-01 08:00:29.119] [info] [beep_ctrl.cpp:252] [1884] exec_cmd data 0 +[1970-01-01 08:00:29.120] [info] [beep_ctrl.cpp:171] [1884] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[1970-01-01 08:00:29.120] [info] [beep_ctrl.cpp:252] [1884] exec_cmd data 333333 +[1970-01-01 08:00:29.120] [info] [beep_ctrl.cpp:189] [1884] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[1970-01-01 08:00:29.120] [info] [beep_ctrl.cpp:252] [1884] exec_cmd data 166666 +[1970-01-01 08:00:29.121] [info] [beep_ctrl.cpp:207] [1884] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[1970-01-01 08:00:29.121] [info] [beep_ctrl.cpp:252] [1884] exec_cmd data normal +[1970-01-01 08:00:29.123] [info] [query_adc.cpp:36] [1884] QueryADC init success! +[1970-01-01 08:00:29.124] [info] [mmu.cpp:1442] [1884] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[1970-01-01 08:00:29.125] [info] [mmu.cpp:1460] [1884] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[1970-01-01 08:00:29.152] [info] [cavity_fan.cpp:36] [1884] PrinterFanCavity init! +[1970-01-01 08:00:29.153] [info] [cavity_fan.cpp:96] [1884] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[1970-01-01 08:00:29.153] [info] [cavity_fan.cpp:107] [1884] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[1970-01-01 08:00:29.154] [info] [cavity_fan.cpp:115] [1884] temp_drop_det_time 1 5 2 1.5 3 +[1970-01-01 08:00:29.154] [info] [fan.cpp:55] [1884] __func__:Fan #1 str_pin:PD17 +[1970-01-01 08:00:29.155] [info] [cavity_fan.cpp:119] [1884] PrinterFanCavity init success!! +[1970-01-01 08:00:29.156] [info] [stepper_enable.cpp:27] [1884] PrinterStepperEnable init! +[1970-01-01 08:00:29.157] [info] [fan.cpp:55] [1884] __func__:Fan #1 str_pin:PG15 +[1970-01-01 08:00:29.160] [info] [fan.cpp:55] [1884] __func__:Fan #1 str_pin:toolhead:PA8 +[1970-01-01 08:00:29.162] [info] [fan.cpp:55] [1884] __func__:Fan #1 str_pin:PD15 +[1970-01-01 08:00:29.173] [warning] [extras_factory.cpp:318] [1884] create extras: "g180_load_config" failer! +[1970-01-01 08:00:29.175] [info] [heater_bed.cpp:18] [1884] PrinterHeaterBed Init! +[1970-01-01 08:00:29.175] [info] [heaters.cpp:836] [1884] PrinterHeaters init! +[1970-01-01 08:00:29.177] [info] [heaters.cpp:861] [1884] PrinterHeaters init success! +[1970-01-01 08:00:29.218] [info] [heaters.cpp:897] [1884] c->get_name(): thermistor NTC 100K beta 3950 +[1970-01-01 08:00:29.219] [info] [thermistor.cpp:138] [1884] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[1970-01-01 08:00:29.260] [info] [heaters.cpp:897] [1884] c->get_name(): thermistor NTC 100K beta 3950 DSP +[1970-01-01 08:00:29.261] [info] [thermistor.cpp:138] [1884] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[1970-01-01 08:00:29.377] [info] [utilities.cpp:52] [1884] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[1970-01-01 08:00:29.378] [info] [thermistor.cpp:146] [1884] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[1970-01-01 08:00:29.378] [info] [heaters.cpp:897] [1884] c->get_name(): thermistor NTC 100K beta 4300 +[1970-01-01 08:00:29.379] [info] [thermistor.cpp:138] [1884] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[1970-01-01 08:00:29.379] [info] [heaters.cpp:897] [1884] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[1970-01-01 08:00:29.380] [info] [thermistor.cpp:138] [1884] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[1970-01-01 08:00:29.380] [info] [heaters.cpp:897] [1884] c->get_name(): thermistor NTC R25 350 +[1970-01-01 08:00:29.381] [info] [thermistor.cpp:138] [1884] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[1970-01-01 08:00:29.381] [info] [heaters.cpp:905] [1884] PrinterHeaters::load_config success! +[1970-01-01 08:00:29.381] [info] [heaters.cpp:994] [1884] setup_sensor success! +[1970-01-01 08:00:29.382] [info] [adc_temperature.cpp:29] [1884] __func__:PrinterADCtoTemperature name:heater_bed +[1970-01-01 08:00:29.382] [info] [adc_temperature.cpp:35] [1884] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[1970-01-01 08:00:29.382] [info] [adc_temperature.cpp:165] [1884] name:heater_bed +[1970-01-01 08:00:29.383] [info] [error_mcu.cpp:101] [1884] create PrinterMCUError success! +[1970-01-01 08:00:29.384] [info] [heaters.cpp:83] [1884] Heater init! name: heater_bed +[1970-01-01 08:00:29.384] [info] [heaters.cpp:119] [1884] __func__:Heater,heater_pin:PG13 +[1970-01-01 08:00:29.386] [info] [pid_calibrate.cpp:43] [1884] PIDCalibrate init success!! +[1970-01-01 08:00:29.387] [warning] [heaters.cpp:322] [1884] Heater init success!!!! +[1970-01-01 08:00:29.388] [warning] [heaters.cpp:947] [1884] debug name heater_bed, gcode_id B +[1970-01-01 08:00:29.389] [info] [heater_bed.cpp:41] [1884] PrinterHeaterBed Init success! +[1970-01-01 08:00:29.389] [info] [heater_fan.cpp:24] [1884] PrinterHeaterFan init! +[1970-01-01 08:00:29.390] [info] [fan.cpp:55] [1884] __func__:Fan #1 str_pin:toolhead:PB13 +[1970-01-01 08:00:29.391] [info] [heater_fan.cpp:46] [1884] PrinterHeaterFan init success!! +[1970-01-01 08:00:29.394] [info] [idle_timeout.cpp:28] [1884] init IdleTimeout ... +[1970-01-01 08:00:29.397] [info] [idle_timeout.cpp:72] [1884] init IdleTimeout success !!! +[1970-01-01 08:00:29.402] [info] [bulk_sensor.cpp:312] [1884] unpack_fmt:len:12,params['clock']:1231289398,params['static_string_id']:19 mcu mcu 'mcu': shutdown! +[1970-01-01 08:01:18.392] [error] [mcu.cpp:1488] [1955] mcu mcu clock32 1231289398 clock64 1231289398 shutdown id 19 msg shutdown_pins +[1970-01-01 08:01:18.394] [info] [config_manager.cpp:338] [1884] save supplement info success +[1970-01-01 08:01:18.396] [info] [config_manager.cpp:474] [1884] save persistent supplement info success +[1970-01-01 08:01:18.396] [info] [virtual_sdcard.cpp:359] [1884] start saving print process data. +[1970-01-01 08:01:18.398] [info] [virtual_sdcard.cpp:397] [1884] handle_power_outage No data needs to be saved before the actual printing. +[1970-01-01 08:01:18.398] [warning] [por.cpp:225] [1884] por:power_off handle done +[1970-01-01 08:00:24.994] [info] [logger.cpp:80] [1883] elegoo log init finish! +[1970-01-01 08:00:25.038] [info] [main.cpp:209] [1883] inputtty:./config/printer,gcode_fd:4 +[1970-01-01 08:00:25.219] [info] [main.cpp:226] [1883] Starting Elegoo... +[1970-01-01 08:00:25.219] [info] [main.cpp:228] [1883] start_args.size:17,sizeof(long_options):9 +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[img_version]:00.00.00.00 +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[gui_version]:01.01.11.03 +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[elegoo_version]:12.26.19.32 +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[camera_version]:00.00.00.00 +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[canvas_version]:00.00.00.00 +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[ota_version]:01.03.01.89 +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[bed_sensor_version]:00.00.00.00 +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[start_reason]:startup +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[apiserver]:/tmp/elegoo_uds +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[toolhead_gd32_version]:00.00.00.00 +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[autosave_file]:/opt/usr/cfg/autosave.cfg +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[gcode_fd]:4 +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[config_file]:/opt/inst/printer_dsp.cfg +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[cpu_info]:2 core ARMv7 Processor rev 5 (v7l) +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[mcu_gd32_version]:00.00.00.00 +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[machine_model]:Centauri Carbon 2 +[1970-01-01 08:00:25.219] [info] [main.cpp:231] [1883] start_args[os_version]:01.02.12.01 +[1970-01-01 08:00:25.219] [info] [main.cpp:236] [1883] long_options[debuginput]:i +[1970-01-01 08:00:25.219] [info] [main.cpp:236] [1883] long_options[input-tty]:I +[1970-01-01 08:00:25.219] [info] [main.cpp:236] [1883] long_options[api-server]:a +[1970-01-01 08:00:25.219] [info] [main.cpp:236] [1883] long_options[logfile]:l +[1970-01-01 08:00:25.219] [info] [main.cpp:236] [1883] long_options[verbose]:v +[1970-01-01 08:00:25.219] [info] [main.cpp:236] [1883] long_options[debugoutput]:o +[1970-01-01 08:00:25.219] [info] [main.cpp:236] [1883] long_options[dictionary]:d +[1970-01-01 08:00:25.219] [info] [main.cpp:236] [1883] long_options[import-test]:t +[1970-01-01 08:00:25.220] [info] [printer.cpp:50] [1883] create Printer success! +[1970-01-01 08:00:25.220] [info] [printer.cpp:365] [1883] connect begin! +[1970-01-01 08:00:25.220] [info] [printer.cpp:284] [1883] read_config begin! +[1970-01-01 08:00:25.277] [info] [webhooks.cpp:595] [1883] create WebHooks success! +[1970-01-01 08:00:25.278] [info] [webhooks.cpp:384] [1883] create ServerSocket success! /tmp/elegoo_uds +[1970-01-01 08:00:25.278] [info] [webhooks.cpp:443] [1883] create ServerSocket success! +[1970-01-01 08:00:25.588] [info] [config_manager.cpp:162] [1883] begin read sn info +[1970-01-01 08:00:25.589] [info] [config_manager.cpp:196] [1883] read product auth success +[1970-01-01 08:00:25.590] [info] [config_manager.cpp:144] [1883] machine: {"machine":{"model":"Centauri Carbon 2"},"versions":[{"os_version":"01.02.12.01"},{"mcu_gd32_version":"00.00.00.00"},{"toolhead_gd32_version":"00.00.00.00"},{"bed_sensor_version":"00.00.00.00"},{"canvas_version":"00.00.00.00"},{"camera_version":"00.00.00.00"},{"elegoo_version":"12.26.19.32"},{"gui_version":"01.01.11.03"},{"ota_version":"01.03.01.89"},{"img_version":"00.00.00.00"}]} +[1970-01-01 08:00:25.632] [info] [config_manager.cpp:150] [1883] parse machine model from sn: Centauri Carbon 2 +[1970-01-01 08:00:25.632] [info] [config_manager.cpp:200] [1883] begin read supplement info +[1970-01-01 08:00:25.716] [info] [config_manager.cpp:283] [1883] token info: token: miM2yt, token_switch_enabled: true, is_lan_mode: false, power_outage_resume_enabled: true, region: 1 +[1970-01-01 08:00:25.720] [info] [config_manager.cpp:441] [1883] load persistent supplement info success +[1970-01-01 08:00:25.798] [info] [device_status.cpp:132] [1883] Create component manager for Centauri Carbon 2 +[1970-01-01 08:00:26.020] [info] [sql_database.cpp:164] [1883] Delete SQL: DELETE FROM file_details WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_details GROUP BY filename HAVING MAX(create_time)); +[1970-01-01 08:00:26.022] [info] [sql_database.cpp:164] [1883] Delete SQL: DELETE FROM file_thumbnail WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_thumbnail GROUP BY filename); +[1970-01-01 08:00:26.026] [info] [record_manager.cpp:302] [1883] Loaded 0 tasks from the database. +[1970-01-01 08:00:26.027] [info] [record_manager.cpp:318] [1883] Loaded 8 files from the database. +[1970-01-01 08:00:26.028] [info] [record_manager.cpp:323] [1883] Loaded 8 thumbnails from the database. +[1970-01-01 08:00:26.055] [info] [record_manager.cpp:328] [1883] Loaded 0 delete file records from the database. +[1970-01-01 08:00:26.056] [info] [record_manager.cpp:333] [1883] Loaded 0 exception messages from the database. +[1970-01-01 08:00:26.061] [info] [record_manager.cpp:820] [1883] File exists: /opt/usr/gcode/local/ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[1970-01-01 08:00:26.062] [info] [record_manager.cpp:820] [1883] File exists: /opt/usr/gcode/local/ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[1970-01-01 08:00:26.063] [info] [record_manager.cpp:820] [1883] File exists: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[1970-01-01 08:00:26.063] [info] [record_manager.cpp:820] [1883] File exists: /opt/usr/gcode/local/ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[1970-01-01 08:00:26.064] [info] [record_manager.cpp:820] [1883] File exists: /opt/usr/gcode/local/ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[1970-01-01 08:00:26.065] [info] [record_manager.cpp:820] [1883] File exists: /opt/usr/gcode/local/ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[1970-01-01 08:00:26.066] [info] [record_manager.cpp:820] [1883] File exists: /opt/usr/gcode/local/ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[1970-01-01 08:00:26.066] [info] [record_manager.cpp:820] [1883] File exists: /opt/usr/gcode/local/ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[1970-01-01 08:00:26.067] [info] [record_manager.cpp:365] [1883] RecordManager initialized successfully. +[1970-01-01 08:00:26.123] [info] [pins.cpp:112] [1883] create PrinterPins success! +[1970-01-01 08:00:26.124] [info] [msgproto.cpp:606] [1883] create MessageParser success! +[1970-01-01 08:00:26.125] [info] [mcu.cpp:1963] [1883] restart_via_remoterpc +[1970-01-01 08:00:26.125] [error] [serialhdl.cpp:309] [1883] SerialReader::disconnect() +[1970-01-01 08:00:26.125] [info] [dsp_helper.h:31] [1883] remoterpc_ctrl 0 +[1970-01-01 08:00:26.125] [info] [webhooks.cpp:56] [1883] webhooks client 7983900: New connection +[1970-01-01 08:00:26.132] [info] [webhooks.cpp:1213] [1883] handle_query is_subscribe true : {"canvas_dev":["canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[1970-01-01 08:00:26.133] [info] [webhooks.cpp:1213] [1883] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[1970-01-01 08:00:26.134] [info] [device_ui_message_handle.cpp:47] [1883] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[1970-01-01 08:00:26.134] [info] [device_ui_message_handle.cpp:485] [1883] Total tasks: 0 +[1970-01-01 08:00:26.135] [info] [webhooks.cpp:787] [1883] return handle_sync_info: {"history_task_list":null,"offset":0,"script":"get_history_task","total":0} +[1970-01-01 08:00:26.135] [info] [webhooks.cpp:170] [1883] return total: {"id":3,"method":"sync_info","result":{"history_task_list":null,"offset":0,"script":"get_history_task","total":0}} +[1970-01-01 08:00:26.137] [warning] [webhooks.cpp:148] [1883] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:26.138] [info] [webhooks.cpp:170] [1883] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":5} +[1970-01-01 08:00:26.139] [info] [webhooks.cpp:170] [1883] return total: {"id":7,"result":{}} +[1970-01-01 08:00:26.140] [warning] [webhooks.cpp:148] [1883] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:26.141] [info] [webhooks.cpp:170] [1883] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":9} +[1970-01-01 08:00:26.141] [info] [device_ui_message_handle.cpp:237] [1883] Handling bind function request {"script":"get_device_info"} +[1970-01-01 08:00:26.142] [info] [webhooks.cpp:756] [1883] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[1970-01-01 08:00:26.142] [info] [webhooks.cpp:170] [1883] return total: {"id":11,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[1970-01-01 08:00:26.143] [info] [device_ui_message_handle.cpp:47] [1883] Handling sync info request {"region_code":1,"script":"set_region"} +[1970-01-01 08:00:26.144] [info] [device_ui_message_handle.cpp:111] [1883] Handling set region request 1 +[1970-01-01 08:00:26.144] [info] [device_ui_message_handle.cpp:114] [1883] Region is the same as current region: 1 +[1970-01-01 08:00:26.144] [info] [webhooks.cpp:787] [1883] return handle_sync_info: {"script":"set_region"} +[1970-01-01 08:00:26.144] [info] [webhooks.cpp:170] [1883] return total: {"id":13,"method":"sync_info","result":{"script":"set_region"}} +[1970-01-01 08:00:26.151] [info] [webhooks.cpp:170] [1883] return total: {"id":1,"result":{"eventtime":24.340133094,"status":null}} +[1970-01-01 08:00:26.153] [warning] [webhooks.cpp:148] [1883] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:26.153] [info] [webhooks.cpp:170] [1883] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":4} +[1970-01-01 08:00:26.154] [info] [device_ui_message_handle.cpp:303] [1883] Get Network access cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[1970-01-01 08:00:26.154] [info] [webhooks.cpp:744] [1883] return handle_get_network_access_cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[1970-01-01 08:00:26.154] [info] [webhooks.cpp:170] [1883] return total: {"id":8,"method":"get_network_access_cfg","result":{"object":{"lan_status":false,"token":"miM2yt","token_status":true}}} +[1970-01-01 08:00:26.156] [info] [device_ui_message_handle.cpp:47] [1883] Handling sync info request {"script":"get_device_status"} +[1970-01-01 08:00:26.156] [info] [device_ui_message_handle.cpp:125] [1883] Handling get device status request +[1970-01-01 08:00:26.208] [info] [device_ui_message_handle.cpp:136] [1883] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[1970-01-01 08:00:26.208] [info] [webhooks.cpp:787] [1883] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[1970-01-01 08:00:26.209] [info] [webhooks.cpp:170] [1883] return total: {"id":12,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[1970-01-01 08:00:26.210] [info] [webhooks.cpp:170] [1883] return total: {"id":2,"result":{"eventtime":24.340133094,"status":null}} +[1970-01-01 08:00:26.637] [warning] [webhooks.cpp:148] [1883] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:26.637] [info] [webhooks.cpp:170] [1883] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":6} +[1970-01-01 08:00:26.639] [info] [device_ui_message_handle.cpp:47] [1883] Handling sync info request {"script":"set_status","status":0,"sub_status":0} +[1970-01-01 08:00:26.639] [info] [device_ui_message_handle.cpp:535] [1883] Setting status: 0, sub_status: 0 +[1970-01-01 08:00:26.640] [info] [device_status.cpp:1023] [1883] Set UI ready: false +[1970-01-01 08:00:26.640] [info] [webhooks.cpp:787] [1883] return handle_sync_info: {"script":"set_status"} +[1970-01-01 08:00:26.641] [info] [webhooks.cpp:170] [1883] return total: {"id":14,"method":"sync_info","result":{"script":"set_status"}} +[1970-01-01 08:00:27.126] [info] [dsp_helper.h:31] [1883] remoterpc_ctrl 1 +[1970-01-01 08:00:27.242] [warning] [webhooks.cpp:148] [1883] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:27.244] [info] [webhooks.cpp:170] [1883] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":10} +[1970-01-01 08:00:28.243] [info] [msgproto.cpp:606] [1883] create MessageParser success! +[1970-01-01 08:00:28.246] [info] [mcu.cpp:1049] [1883] MCU 'bed_sensor' restart power +[1970-01-01 08:00:28.655] [info] [mcu.cpp:1072] [1883] bootloader mode, try jump to app! +[1970-01-01 08:00:28.685] [info] [msgproto.cpp:606] [1883] create MessageParser success! +[1970-01-01 08:00:28.687] [info] [mcu.cpp:1049] [1883] MCU 'toolhead' restart power +[1970-01-01 08:00:30.152] [info] [bed_mesh.cpp:1466] [1883] zero_ref_pos size 0 +[1970-01-01 08:00:30.190] [info] [bed_mesh.cpp:2722] [1883] ProfileManager profile->get_name bed_mesh +[1970-01-01 08:00:30.192] [info] [gcode_move.cpp:60] [1883] GCodeMove init! +[1970-01-01 08:00:30.233] [info] [gcode_move.cpp:119] [1883] GCodeMove init success!! +[1970-01-01 08:00:30.233] [info] [gcode_move.cpp:274] [1883] set_move_transform transform: force:false +[1970-01-01 08:00:30.293] [info] [print_stats.cpp:26] [1883] PrintStats init! +[1970-01-01 08:00:30.295] [info] [print_stats.cpp:55] [1883] PrintStats init success!! +[1970-01-01 08:00:30.295] [info] [print_stats.cpp:277] [1883] bed_mesh_exist:0x0000 +[1970-01-01 08:00:30.296] [info] [beep_ctrl.cpp:39] [1883] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[1970-01-01 08:00:30.297] [info] [beep_ctrl.cpp:137] [1883] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[1970-01-01 08:00:30.298] [info] [beep_ctrl.cpp:252] [1883] exec_cmd data 0 +[1970-01-01 08:00:30.300] [info] [beep_ctrl.cpp:171] [1883] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[1970-01-01 08:00:30.300] [info] [beep_ctrl.cpp:252] [1883] exec_cmd data 333333 +[1970-01-01 08:00:30.300] [info] [beep_ctrl.cpp:189] [1883] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[1970-01-01 08:00:30.300] [info] [beep_ctrl.cpp:252] [1883] exec_cmd data 166666 +[1970-01-01 08:00:30.301] [info] [beep_ctrl.cpp:207] [1883] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[1970-01-01 08:00:30.301] [info] [beep_ctrl.cpp:252] [1883] exec_cmd data normal +[1970-01-01 08:00:30.356] [info] [query_adc.cpp:36] [1883] QueryADC init success! +[1970-01-01 08:00:30.358] [info] [mmu.cpp:1442] [1883] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[1970-01-01 08:00:30.358] [info] [mmu.cpp:1460] [1883] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[1970-01-01 08:00:30.386] [info] [cavity_fan.cpp:36] [1883] PrinterFanCavity init! +[1970-01-01 08:00:30.386] [info] [cavity_fan.cpp:96] [1883] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[1970-01-01 08:00:30.387] [info] [cavity_fan.cpp:107] [1883] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[1970-01-01 08:00:30.387] [info] [cavity_fan.cpp:115] [1883] temp_drop_det_time 1 5 2 1.5 3 +[1970-01-01 08:00:30.388] [info] [fan.cpp:55] [1883] __func__:Fan #1 str_pin:PD17 +[1970-01-01 08:00:30.388] [info] [cavity_fan.cpp:119] [1883] PrinterFanCavity init success!! +[1970-01-01 08:00:30.389] [info] [stepper_enable.cpp:27] [1883] PrinterStepperEnable init! +[1970-01-01 08:00:30.391] [info] [fan.cpp:55] [1883] __func__:Fan #1 str_pin:PG15 +[1970-01-01 08:00:30.393] [info] [fan.cpp:55] [1883] __func__:Fan #1 str_pin:toolhead:PA8 +[1970-01-01 08:00:30.396] [info] [fan.cpp:55] [1883] __func__:Fan #1 str_pin:PD15 +[1970-01-01 08:00:30.407] [warning] [extras_factory.cpp:318] [1883] create extras: "g180_load_config" failer! +[1970-01-01 08:00:30.409] [info] [heater_bed.cpp:18] [1883] PrinterHeaterBed Init! +[1970-01-01 08:00:30.409] [info] [heaters.cpp:836] [1883] PrinterHeaters init! +[1970-01-01 08:00:30.410] [info] [heaters.cpp:861] [1883] PrinterHeaters init success! +[1970-01-01 08:00:30.450] [info] [heaters.cpp:897] [1883] c->get_name(): thermistor NTC 100K beta 3950 +[1970-01-01 08:00:30.450] [info] [thermistor.cpp:138] [1883] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[1970-01-01 08:00:30.551] [info] [heaters.cpp:897] [1883] c->get_name(): thermistor NTC 100K beta 3950 DSP +[1970-01-01 08:00:30.552] [info] [thermistor.cpp:138] [1883] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[1970-01-01 08:00:30.671] [info] [utilities.cpp:52] [1883] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[1970-01-01 08:00:30.674] [info] [thermistor.cpp:146] [1883] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[1970-01-01 08:00:30.674] [info] [heaters.cpp:897] [1883] c->get_name(): thermistor NTC 100K beta 4300 +[1970-01-01 08:00:30.675] [info] [thermistor.cpp:138] [1883] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[1970-01-01 08:00:30.675] [info] [heaters.cpp:897] [1883] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[1970-01-01 08:00:30.676] [info] [thermistor.cpp:138] [1883] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[1970-01-01 08:00:30.676] [info] [heaters.cpp:897] [1883] c->get_name(): thermistor NTC R25 350 +[1970-01-01 08:00:30.677] [info] [thermistor.cpp:138] [1883] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[1970-01-01 08:00:30.677] [info] [heaters.cpp:905] [1883] PrinterHeaters::load_config success! +[1970-01-01 08:00:30.677] [info] [heaters.cpp:994] [1883] setup_sensor success! +[1970-01-01 08:00:30.677] [info] [adc_temperature.cpp:29] [1883] __func__:PrinterADCtoTemperature name:heater_bed +[1970-01-01 08:00:30.678] [info] [adc_temperature.cpp:35] [1883] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[1970-01-01 08:00:30.678] [info] [adc_temperature.cpp:165] [1883] name:heater_bed +[1970-01-01 08:00:30.679] [info] [error_mcu.cpp:101] [1883] create PrinterMCUError success! +[1970-01-01 08:00:30.680] [info] [heaters.cpp:83] [1883] Heater init! name: heater_bed +[1970-01-01 08:00:30.681] [info] [heaters.cpp:119] [1883] __func__:Heater,heater_pin:PG13 +[1970-01-01 08:00:30.682] [info] [pid_calibrate.cpp:43] [1883] PIDCalibrate init success!! +[1970-01-01 08:00:30.683] [warning] [heaters.cpp:322] [1883] Heater init success!!!! +[1970-01-01 08:00:30.684] [warning] [heaters.cpp:947] [1883] debug name heater_bed, gcode_id B +[1970-01-01 08:00:30.687] [info] [heater_bed.cpp:41] [1883] PrinterHeaterBed Init success! +[1970-01-01 08:00:30.688] [info] [heater_fan.cpp:24] [1883] PrinterHeaterFan init! +[1970-01-01 08:00:30.689] [info] [fan.cpp:55] [1883] __func__:Fan #1 str_pin:toolhead:PB13 +[1970-01-01 08:00:30.691] [info] [heater_fan.cpp:46] [1883] PrinterHeaterFan init success!! +[1970-01-01 08:00:30.694] [info] [idle_timeout.cpp:28] [1883] init IdleTimeout ... +[1970-01-01 08:00:30.696] [info] [idle_timeout.cpp:72] [1883] init IdleTimeout success !!! +[1970-01-01 08:00:30.750] [info] [bulk_sensor.cpp:312] [1883] unpack_fmt:get_name bed_mesh +[1970-01-01 08:00:30.312] [info] [gcode_move.cpp:60] [1883] GCodeMove init! +[1970-01-01 08:00:30.353] [info] [gcode_move.cpp:119] [1883] GCodeMove init success!! +[1970-01-01 08:00:30.354] [info] [gcode_move.cpp:274] [1883] set_move_transform transform: force:false +[1970-01-01 08:00:30.444] [info] [print_stats.cpp:26] [1883] PrintStats init! +[1970-01-01 08:00:30.445] [info] [print_stats.cpp:55] [1883] PrintStats init success!! +[1970-01-01 08:00:30.445] [info] [print_stats.cpp:277] [1883] bed_mesh_exist:0x0000 +[1970-01-01 08:00:30.446] [info] [beep_ctrl.cpp:39] [1883] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[1970-01-01 08:00:30.448] [info] [beep_ctrl.cpp:137] [1883] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[1970-01-01 08:00:30.448] [info] [beep_ctrl.cpp:252] [1883] exec_cmd data 0 +[1970-01-01 08:00:30.449] [info] [beep_ctrl.cpp:171] [1883] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[1970-01-01 08:00:30.449] [info] [beep_ctrl.cpp:252] [1883] exec_cmd data 333333 +[1970-01-01 08:00:30.449] [info] [beep_ctrl.cpp:189] [1883] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[1970-01-01 08:00:30.450] [info] [beep_ctrl.cpp:252] [1883] exec_cmd data 166666 +[1970-01-01 08:00:30.450] [info] [beep_ctrl.cpp:207] [1883] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[1970-01-01 08:00:30.450] [info] [beep_ctrl.cpp:252] [1883] exec_cmd data normal +[1970-01-01 08:00:30.509] [info] [query_adc.cpp:36] [1883] QueryADC init success! +[1970-01-01 08:00:30.510] [info] [mmu.cpp:1442] [1883] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[1970-01-01 08:00:30.511] [info] [mmu.cpp:1460] [1883] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[1970-01-01 08:00:30.538] [info] [cavity_fan.cpp:36] [1883] PrinterFanCavity init! +[1970-01-01 08:00:30.539] [info] [cavity_fan.cpp:96] [1883] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[1970-01-01 08:00:30.540] [info] [cavity_fan.cpp:107] [1883] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[1970-01-01 08:00:30.540] [info] [cavity_fan.cpp:115] [1883] temp_drop_det_time 1 5 2 1.5 3 +[1970-01-01 08:00:30.554] [info] [fan.cpp:55] [1883] __func__:Fan #1 str_pin:PD17 +[1970-01-01 08:00:30.555] [info] [cavity_fan.cpp:119] [1883] PrinterFanCavity init success!! +[1970-01-01 08:00:30.584] [info] [stepper_enable.cpp:27] [1883] PrinterStepperEnable init! +[1970-01-01 08:00:30.586] [info] [fan.cpp:55] [1883] __func__:Fan #1 str_pin:PG15 +[1970-01-01 08:00:30.588] [info] [fan.cpp:55] [1883] __func__:Fan #1 str_pin:toolhead:PA8 +[1970-01-01 08:00:30.591] [info] [fan.cpp:55] [1883] __func__:Fan #1 str_pin:PD15 +[1970-01-01 08:00:30.602] [warning] [extras_factory.cpp:318] [1883] create extras: "g180_load_config" failer! +[1970-01-01 08:00:30.604] [info] [heater_bed.cpp:18] [1883] PrinterHeaterBed Init! +[1970-01-01 08:00:30.604] [info] [heaters.cpp:836] [1883] PrinterHeaters init! +[1970-01-01 08:00:30.606] [info] [heaters.cpp:861] [1883] PrinterHeaters init success! +[1970-01-01 08:00:30.645] [info] [heaters.cpp:897] [1883] c->get_name(): thermistor NTC 100K beta 3950 +[1970-01-01 08:00:30.646] [info] [thermistor.cpp:138] [1883] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[1970-01-01 08:00:30.647] [info] [heaters.cpp:897] [1883] c->get_name(): thermistor NTC 100K beta 3950 DSP +[1970-01-01 08:00:30.647] [info] [thermistor.cpp:138] [1883] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[1970-01-01 08:00:30.764] [info] [utilities.cpp:52] [1883] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[1970-01-01 08:00:30.766] [info] [thermistor.cpp:146] [1883] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[1970-01-01 08:00:30.766] [info] [heaters.cpp:897] [1883] c->get_name(): thermistor NTC 100K beta 4300 +[1970-01-01 08:00:30.767] [info] [thermistor.cpp:138] [1883] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[1970-01-01 08:00:30.767] [info] [heaters.cpp:897] [1883] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[1970-01-01 08:00:30.768] [info] [thermistor.cpp:138] [1883] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[1970-01-01 08:00:30.768] [info] [heaters.cpp:897] [1883] c->get_name(): thermistor NTC R25 350 +[1970-01-01 08:00:30.769] [info] [thermistor.cpp:138] [1883] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[1970-01-01 08:00:30.769] [info] [heaters.cpp:905] [1883] PrinterHeaters::load_config success! +[1970-01-01 08:00:30.769] [info] [heaters.cpp:994] [1883] setup_sensor success! +[1970-01-01 08:00:30.769] [info] [adc_temperature.cpp:29] [1883] __func__:PrinterADCtoTemperature name:heater_bed +[1970-01-01 08:00:30.770] [info] [adc_temperature.cpp:35] [1883] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[1970-01-01 08:00:30.770] [info] [adc_temperature.cpp:165] [1883] name:heater_bed +[1970-01-01 08:00:30.771] [info] [error_mcu.cpp:101] [1883] create PrinterMCUError success! +[1970-01-01 08:00:30.772] [info] [heaters.cpp:83] [1883] Heater init! name: heater_bed +[1970-01-01 08:00:30.772] [info] [heaters.cpp:119] [1883] __func__:Heater,heater_pin:PG13 +[1970-01-01 08:00:30.774] [info] [pid_calibrate.cpp:43] [1883] PIDCalibrate init success!! +[1970-01-01 08:00:30.775] [warning] [heaters.cpp:322] [1883] Heater init success!!!! +[1970-01-01 08:00:30.775] [warning] [heaters.cpp:947] [1883] debug name heater_bed, gcode_id B +[1970-01-01 08:00:30.776] [info] [heater_bed.cpp:41] [1883] PrinterHeaterBed Init success! +[1970-01-01 08:00:30.777] [info] [heater_fan.cpp:24] [1883] PrinterHeaterFan init! +[1970-01-01 08:00:30.777] [info] [fan.cpp:55] [1883] __func__:Fan #1 str_pin:toolhead:PB13 +[1970-01-01 08:00:30.778] [info] [heater_fan.cpp:46] [1883] PrinterHeaterFan init success!! +[1970-01-01 08:00:30.810] [info] [idle_timeout.cpp:28] [1883] init IdleTimeout ... +[1970-01-01 08:00:30.812] [info] [idle_timeout.cpp:72] [1883] init IdleTimeout success !!! +[1970-01-01 08:00:30.868] [info] [bulk_sensor.cpp:312] [1883] unpack_fmt:get_name bed_mesh +[1970-01-01 08:00:29.350] [info] [gcode_move.cpp:60] [1883] GCodeMove init! +[1970-01-01 08:00:29.392] [info] [gcode_move.cpp:119] [1883] GCodeMove init success!! +[1970-01-01 08:00:29.392] [info] [gcode_move.cpp:274] [1883] set_move_transform transform: force:false +[1970-01-01 08:00:29.452] [info] [print_stats.cpp:26] [1883] PrintStats init! +[1970-01-01 08:00:29.453] [info] [print_stats.cpp:55] [1883] PrintStats init success!! +[1970-01-01 08:00:29.453] [info] [print_stats.cpp:277] [1883] bed_mesh_exist:0x0000 +[1970-01-01 08:00:29.454] [info] [beep_ctrl.cpp:39] [1883] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[1970-01-01 08:00:29.456] [info] [beep_ctrl.cpp:137] [1883] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[1970-01-01 08:00:29.456] [info] [beep_ctrl.cpp:252] [1883] exec_cmd data 0 +[1970-01-01 08:00:29.458] [info] [beep_ctrl.cpp:171] [1883] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[1970-01-01 08:00:29.458] [info] [beep_ctrl.cpp:252] [1883] exec_cmd data 333333 +[1970-01-01 08:00:29.459] [info] [beep_ctrl.cpp:189] [1883] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[1970-01-01 08:00:29.459] [info] [beep_ctrl.cpp:252] [1883] exec_cmd data 166666 +[1970-01-01 08:00:29.460] [info] [beep_ctrl.cpp:207] [1883] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[1970-01-01 08:00:29.460] [info] [beep_ctrl.cpp:252] [1883] exec_cmd data normal +[1970-01-01 08:00:29.462] [info] [query_adc.cpp:36] [1883] QueryADC init success! +[1970-01-01 08:00:29.463] [info] [mmu.cpp:1442] [1883] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[1970-01-01 08:00:29.464] [info] [mmu.cpp:1460] [1883] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[1970-01-01 08:00:29.466] [info] [cavity_fan.cpp:36] [1883] PrinterFanCavity init! +[1970-01-01 08:00:29.467] [info] [cavity_fan.cpp:96] [1883] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[1970-01-01 08:00:29.467] [info] [cavity_fan.cpp:107] [1883] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[1970-01-01 08:00:29.467] [info] [cavity_fan.cpp:115] [1883] temp_drop_det_time 1 5 2 1.5 3 +[1970-01-01 08:00:29.468] [info] [fan.cpp:55] [1883] __func__:Fan #1 str_pin:PD17 +[1970-01-01 08:00:29.469] [info] [cavity_fan.cpp:119] [1883] PrinterFanCavity init success!! +[1970-01-01 08:00:29.469] [info] [stepper_enable.cpp:27] [1883] PrinterStepperEnable init! +[1970-01-01 08:00:29.471] [info] [fan.cpp:55] [1883] __func__:Fan #1 str_pin:PG15 +[1970-01-01 08:00:29.474] [info] [fan.cpp:55] [1883] __func__:Fan #1 str_pin:toolhead:PA8 +[1970-01-01 08:00:29.476] [info] [fan.cpp:55] [1883] __func__:Fan #1 str_pin:PD15 +[1970-01-01 08:00:29.487] [warning] [extras_factory.cpp:318] [1883] create extras: "g180_load_config" failer! +[1970-01-01 08:00:29.489] [info] [heater_bed.cpp:18] [1883] PrinterHeaterBed Init! +[1970-01-01 08:00:29.489] [info] [heaters.cpp:836] [1883] PrinterHeaters init! +[1970-01-01 08:00:29.491] [info] [heaters.cpp:861] [1883] PrinterHeaters init success! +[1970-01-01 08:00:29.532] [info] [heaters.cpp:897] [1883] c->get_name(): thermistor NTC 100K beta 3950 +[1970-01-01 08:00:29.533] [info] [thermistor.cpp:138] [1883] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[1970-01-01 08:00:29.533] [info] [heaters.cpp:897] [1883] c->get_name(): thermistor NTC 100K beta 3950 DSP +[1970-01-01 08:00:29.534] [info] [thermistor.cpp:138] [1883] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[1970-01-01 08:00:29.612] [info] [utilities.cpp:52] [1883] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[1970-01-01 08:00:29.613] [info] [thermistor.cpp:146] [1883] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[1970-01-01 08:00:29.616] [info] [heaters.cpp:897] [1883] c->get_name(): thermistor NTC 100K beta 4300 +[1970-01-01 08:00:29.616] [info] [thermistor.cpp:138] [1883] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[1970-01-01 08:00:29.617] [info] [heaters.cpp:897] [1883] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[1970-01-01 08:00:29.617] [info] [thermistor.cpp:138] [1883] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[1970-01-01 08:00:29.617] [info] [heaters.cpp:897] [1883] c->get_name(): thermistor NTC R25 350 +[1970-01-01 08:00:29.618] [info] [thermistor.cpp:138] [1883] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[1970-01-01 08:00:29.660] [info] [heaters.cpp:905] [1883] PrinterHeaters::load_config success! +[1970-01-01 08:00:29.660] [info] [heaters.cpp:994] [1883] setup_sensor success! +[1970-01-01 08:00:29.660] [info] [adc_temperature.cpp:29] [1883] __func__:PrinterADCtoTemperature name:heater_bed +[1970-01-01 08:00:29.661] [info] [adc_temperature.cpp:35] [1883] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[1970-01-01 08:00:29.661] [info] [adc_temperature.cpp:165] [1883] name:heater_bed +[1970-01-01 08:00:29.661] [info] [error_mcu.cpp:101] [1883] create PrinterMCUError success! +[1970-01-01 08:00:29.662] [info] [heaters.cpp:83] [1883] Heater init! name: heater_bed +[1970-01-01 08:00:29.663] [info] [heaters.cpp:119] [1883] __func__:Heater,heater_pin:PG13 +[1970-01-01 08:00:29.664] [info] [pid_calibrate.cpp:43] [1883] PIDCalibrate init success!! +[1970-01-01 08:00:29.665] [warning] [heaters.cpp:322] [1883] Heater init success!!!! +[1970-01-01 08:00:29.666] [warning] [heaters.cpp:947] [1883] debug name heater_bed, gcode_id B +[1970-01-01 08:00:29.667] [info] [heater_bed.cpp:41] [1883] PrinterHeaterBed Init success! +[1970-01-01 08:00:29.667] [info] [heater_fan.cpp:24] [1883] PrinterHeaterFan init! +[1970-01-01 08:00:29.668] [info] [fan.cpp:55] [1883] __func__:Fan #1 str_pin:toolhead:PB13 +[1970-01-01 08:00:29.668] [info] [heater_fan.cpp:46] [1883] PrinterHeaterFan init success!! +[1970-01-01 08:00:29.672] [info] [idle_timeout.cpp:28] [1883] init IdleTimeout ... +[1970-01-01 08:00:29.673] [info] [idle_timeout.cpp:72] [1883] init IdleTimeout success !!! +[1970-01-01 08:00:29.677] [info] [bulk_sensor.cpp:312] [1883] unpack_fmt:len:12,params['clock']:2855444388,params['static_string_id']:19 mcu mcu 'mcu': shutdown! +[1970-01-01 08:02:26.315] [error] [mcu.cpp:1488] [1957] mcu mcu clock32 2855444388 clock64 2855444388 shutdown id 19 msg shutdown_pins +[1970-01-01 08:02:26.316] [info] [config_manager.cpp:474] [1883] save persistent supplement info success +[1970-01-01 08:02:26.316] [info] [virtual_sdcard.cpp:359] [1883] start saving print process data. +[1970-01-01 08:02:26.318] [info] [virtual_sdcard.cpp:397] [1883] handle_power_outage No data needs to be saved before the actual printing. +[1970-01-01 08:02:26.318] [warning] [por.cpp:225] [1883] por:power_off handle done +[1970-01-01 08:00:24.918] [info] [logger.cpp:80] [1885] elegoo log init finish! +[1970-01-01 08:00:24.936] [info] [main.cpp:209] [1885] inputtty:./config/printer,gcode_fd:5 +[1970-01-01 08:00:25.119] [info] [main.cpp:226] [1885] Starting Elegoo... +[1970-01-01 08:00:25.119] [info] [main.cpp:228] [1885] start_args.size:17,sizeof(long_options):9 +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[img_version]:00.00.00.00 +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[gui_version]:01.01.11.03 +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[elegoo_version]:12.26.19.32 +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[camera_version]:00.00.00.00 +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[canvas_version]:00.00.00.00 +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[ota_version]:01.03.01.89 +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[bed_sensor_version]:00.00.00.00 +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[start_reason]:startup +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[apiserver]:/tmp/elegoo_uds +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[toolhead_gd32_version]:00.00.00.00 +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[autosave_file]:/opt/usr/cfg/autosave.cfg +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[gcode_fd]:5 +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[config_file]:/opt/inst/printer_dsp.cfg +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[cpu_info]:2 core ARMv7 Processor rev 5 (v7l) +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[mcu_gd32_version]:00.00.00.00 +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[machine_model]:Centauri Carbon 2 +[1970-01-01 08:00:25.119] [info] [main.cpp:231] [1885] start_args[os_version]:01.02.12.01 +[1970-01-01 08:00:25.119] [info] [main.cpp:236] [1885] long_options[debuginput]:i +[1970-01-01 08:00:25.119] [info] [main.cpp:236] [1885] long_options[input-tty]:I +[1970-01-01 08:00:25.119] [info] [main.cpp:236] [1885] long_options[api-server]:a +[1970-01-01 08:00:25.119] [info] [main.cpp:236] [1885] long_options[logfile]:l +[1970-01-01 08:00:25.119] [info] [main.cpp:236] [1885] long_options[verbose]:v +[1970-01-01 08:00:25.120] [info] [main.cpp:236] [1885] long_options[debugoutput]:o +[1970-01-01 08:00:25.120] [info] [main.cpp:236] [1885] long_options[dictionary]:d +[1970-01-01 08:00:25.120] [info] [main.cpp:236] [1885] long_options[import-test]:t +[1970-01-01 08:00:25.120] [info] [printer.cpp:50] [1885] create Printer success! +[1970-01-01 08:00:25.121] [info] [printer.cpp:365] [1885] connect begin! +[1970-01-01 08:00:25.121] [info] [printer.cpp:284] [1885] read_config begin! +[1970-01-01 08:00:25.207] [info] [webhooks.cpp:595] [1885] create WebHooks success! +[1970-01-01 08:00:25.207] [info] [webhooks.cpp:384] [1885] create ServerSocket success! /tmp/elegoo_uds +[1970-01-01 08:00:25.208] [info] [webhooks.cpp:443] [1885] create ServerSocket success! +[1970-01-01 08:00:25.513] [info] [config_manager.cpp:162] [1885] begin read sn info +[1970-01-01 08:00:25.514] [info] [config_manager.cpp:196] [1885] read product auth success +[1970-01-01 08:00:25.548] [info] [config_manager.cpp:144] [1885] machine: {"machine":{"model":"Centauri Carbon 2"},"versions":[{"os_version":"01.02.12.01"},{"mcu_gd32_version":"00.00.00.00"},{"toolhead_gd32_version":"00.00.00.00"},{"bed_sensor_version":"00.00.00.00"},{"canvas_version":"00.00.00.00"},{"camera_version":"00.00.00.00"},{"elegoo_version":"12.26.19.32"},{"gui_version":"01.01.11.03"},{"ota_version":"01.03.01.89"},{"img_version":"00.00.00.00"}]} +[1970-01-01 08:00:25.591] [info] [config_manager.cpp:150] [1885] parse machine model from sn: Centauri Carbon 2 +[1970-01-01 08:00:25.591] [info] [config_manager.cpp:200] [1885] begin read supplement info +[1970-01-01 08:00:25.648] [info] [config_manager.cpp:283] [1885] token info: token: miM2yt, token_switch_enabled: true, is_lan_mode: false, power_outage_resume_enabled: true, region: 1 +[1970-01-01 08:00:25.651] [info] [config_manager.cpp:441] [1885] load persistent supplement info success +[1970-01-01 08:00:25.729] [info] [device_status.cpp:132] [1885] Create component manager for Centauri Carbon 2 +[1970-01-01 08:00:25.951] [info] [sql_database.cpp:164] [1885] Delete SQL: DELETE FROM file_details WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_details GROUP BY filename HAVING MAX(create_time)); +[1970-01-01 08:00:25.953] [info] [sql_database.cpp:164] [1885] Delete SQL: DELETE FROM file_thumbnail WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_thumbnail GROUP BY filename); +[1970-01-01 08:00:25.957] [info] [record_manager.cpp:302] [1885] Loaded 0 tasks from the database. +[1970-01-01 08:00:25.958] [info] [record_manager.cpp:318] [1885] Loaded 8 files from the database. +[1970-01-01 08:00:25.959] [info] [record_manager.cpp:323] [1885] Loaded 8 thumbnails from the database. +[1970-01-01 08:00:25.986] [info] [record_manager.cpp:328] [1885] Loaded 0 delete file records from the database. +[1970-01-01 08:00:26.034] [info] [sql_database.cpp:404] [1885] Loaded exception message: id 1, code 801 +[1970-01-01 08:00:26.034] [info] [sql_database.cpp:404] [1885] Loaded exception message: id 2, code 801 +[1970-01-01 08:00:26.035] [info] [record_manager.cpp:333] [1885] Loaded 2 exception messages from the database. +[1970-01-01 08:00:26.040] [info] [record_manager.cpp:820] [1885] File exists: /opt/usr/gcode/local/ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[1970-01-01 08:00:26.040] [info] [record_manager.cpp:820] [1885] File exists: /opt/usr/gcode/local/ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[1970-01-01 08:00:26.041] [info] [record_manager.cpp:820] [1885] File exists: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[1970-01-01 08:00:26.042] [info] [record_manager.cpp:820] [1885] File exists: /opt/usr/gcode/local/ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[1970-01-01 08:00:26.043] [info] [record_manager.cpp:820] [1885] File exists: /opt/usr/gcode/local/ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[1970-01-01 08:00:26.043] [info] [record_manager.cpp:820] [1885] File exists: /opt/usr/gcode/local/ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[1970-01-01 08:00:26.044] [info] [record_manager.cpp:820] [1885] File exists: /opt/usr/gcode/local/ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[1970-01-01 08:00:26.045] [info] [record_manager.cpp:820] [1885] File exists: /opt/usr/gcode/local/ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[1970-01-01 08:00:26.045] [info] [record_manager.cpp:365] [1885] RecordManager initialized successfully. +[1970-01-01 08:00:26.046] [info] [pins.cpp:112] [1885] create PrinterPins success! +[1970-01-01 08:00:26.098] [info] [msgproto.cpp:606] [1885] create MessageParser success! +[1970-01-01 08:00:26.098] [info] [mcu.cpp:1963] [1885] restart_via_remoterpc +[1970-01-01 08:00:26.098] [error] [serialhdl.cpp:309] [1885] SerialReader::disconnect() +[1970-01-01 08:00:26.098] [info] [dsp_helper.h:31] [1885] remoterpc_ctrl 0 +[1970-01-01 08:00:26.099] [info] [webhooks.cpp:56] [1885] webhooks client 25294756: New connection +[1970-01-01 08:00:26.106] [info] [webhooks.cpp:1213] [1885] handle_query is_subscribe true : {"canvas_dev":["canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[1970-01-01 08:00:26.107] [info] [webhooks.cpp:1213] [1885] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[1970-01-01 08:00:26.108] [info] [device_ui_message_handle.cpp:47] [1885] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[1970-01-01 08:00:26.108] [info] [device_ui_message_handle.cpp:485] [1885] Total tasks: 0 +[1970-01-01 08:00:26.108] [info] [webhooks.cpp:787] [1885] return handle_sync_info: {"history_task_list":null,"offset":0,"script":"get_history_task","total":0} +[1970-01-01 08:00:26.109] [info] [webhooks.cpp:170] [1885] return total: {"id":3,"method":"sync_info","result":{"history_task_list":null,"offset":0,"script":"get_history_task","total":0}} +[1970-01-01 08:00:26.142] [warning] [webhooks.cpp:148] [1885] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:26.143] [info] [webhooks.cpp:170] [1885] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":5} +[1970-01-01 08:00:26.144] [info] [webhooks.cpp:170] [1885] return total: {"id":7,"result":{}} +[1970-01-01 08:00:26.145] [warning] [webhooks.cpp:148] [1885] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:26.146] [info] [webhooks.cpp:170] [1885] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":9} +[1970-01-01 08:00:26.146] [info] [device_ui_message_handle.cpp:237] [1885] Handling bind function request {"script":"get_device_info"} +[1970-01-01 08:00:26.147] [info] [webhooks.cpp:756] [1885] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[1970-01-01 08:00:26.147] [info] [webhooks.cpp:170] [1885] return total: {"id":11,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[1970-01-01 08:00:26.148] [info] [device_ui_message_handle.cpp:47] [1885] Handling sync info request {"region_code":1,"script":"set_region"} +[1970-01-01 08:00:26.149] [info] [device_ui_message_handle.cpp:111] [1885] Handling set region request 1 +[1970-01-01 08:00:26.149] [info] [device_ui_message_handle.cpp:114] [1885] Region is the same as current region: 1 +[1970-01-01 08:00:26.149] [info] [webhooks.cpp:787] [1885] return handle_sync_info: {"script":"set_region"} +[1970-01-01 08:00:26.149] [info] [webhooks.cpp:170] [1885] return total: {"id":13,"method":"sync_info","result":{"script":"set_region"}} +[1970-01-01 08:00:26.155] [info] [webhooks.cpp:170] [1885] return total: {"id":1,"result":{"eventtime":24.076811011,"status":null}} +[1970-01-01 08:00:26.157] [warning] [webhooks.cpp:148] [1885] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:26.158] [info] [webhooks.cpp:170] [1885] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":4} +[1970-01-01 08:00:26.158] [info] [device_ui_message_handle.cpp:303] [1885] Get Network access cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[1970-01-01 08:00:26.159] [info] [webhooks.cpp:744] [1885] return handle_get_network_access_cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[1970-01-01 08:00:26.159] [info] [webhooks.cpp:170] [1885] return total: {"id":8,"method":"get_network_access_cfg","result":{"object":{"lan_status":false,"token":"miM2yt","token_status":true}}} +[1970-01-01 08:00:26.160] [info] [device_ui_message_handle.cpp:47] [1885] Handling sync info request {"script":"get_device_status"} +[1970-01-01 08:00:26.160] [info] [device_ui_message_handle.cpp:125] [1885] Handling get device status request +[1970-01-01 08:00:26.161] [info] [device_ui_message_handle.cpp:136] [1885] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[1970-01-01 08:00:26.162] [info] [webhooks.cpp:787] [1885] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[1970-01-01 08:00:26.162] [info] [webhooks.cpp:170] [1885] return total: {"id":12,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[1970-01-01 08:00:26.164] [info] [webhooks.cpp:170] [1885] return total: {"id":2,"result":{"eventtime":24.076811011,"status":null}} +[1970-01-01 08:00:26.611] [warning] [webhooks.cpp:148] [1885] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:26.611] [info] [webhooks.cpp:170] [1885] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":6} +[1970-01-01 08:00:26.613] [info] [device_ui_message_handle.cpp:47] [1885] Handling sync info request {"script":"set_status","status":0,"sub_status":0} +[1970-01-01 08:00:26.613] [info] [device_ui_message_handle.cpp:535] [1885] Setting status: 0, sub_status: 0 +[1970-01-01 08:00:26.614] [info] [device_status.cpp:1023] [1885] Set UI ready: false +[1970-01-01 08:00:26.614] [info] [webhooks.cpp:787] [1885] return handle_sync_info: {"script":"set_status"} +[1970-01-01 08:00:26.615] [info] [webhooks.cpp:170] [1885] return total: {"id":14,"method":"sync_info","result":{"script":"set_status"}} +[1970-01-01 08:00:27.100] [info] [dsp_helper.h:31] [1885] remoterpc_ctrl 1 +[1970-01-01 08:00:27.228] [warning] [webhooks.cpp:148] [1885] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[1970-01-01 08:00:27.229] [info] [webhooks.cpp:170] [1885] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":10} +[1970-01-01 08:00:28.220] [info] [msgproto.cpp:606] [1885] create MessageParser success! +[1970-01-01 08:00:28.223] [info] [mcu.cpp:1049] [1885] MCU 'bed_sensor' restart power +[1970-01-01 08:00:28.633] [info] [mcu.cpp:1072] [1885] bootloader mode, try jump to app! +[1970-01-01 08:00:28.662] [info] [msgproto.cpp:606] [1885] create MessageParser success! +[1970-01-01 08:00:28.664] [info] [mcu.cpp:1049] [1885] MCU 'toolhead' restart power +[1970-01-01 08:00:29.074] [info] [mcu.cpp:1072] [1885] bootloader mode, try jump to app! +[1970-01-01 08:00:29.131] [info] [bed_mesh.cpp:1466] [1885] zero_ref_pos size 0 +[1970-01-01 08:00:29.168] [info] [bed_mesh.cpp:2722] [1885] ProfileManager profile->get_name bed_mesh +[1970-01-01 08:00:29.186] [info] [gcode_move.cpp:60] [1885] GCodeMove init! +[1970-01-01 08:00:29.228] [info] [gcode_move.cpp:119] [1885] GCodeMove init success!! +[1970-01-01 08:00:29.228] [info] [gcode_move.cpp:274] [1885] set_move_transform transform: force:false +[1970-01-01 08:00:29.288] [info] [print_stats.cpp:26] [1885] PrintStats init! +[1970-01-01 08:00:29.289] [info] [print_stats.cpp:55] [1885] PrintStats init success!! +[1970-01-01 08:00:29.290] [info] [print_stats.cpp:277] [1885] bed_mesh_exist:0x0000 +[1970-01-01 08:00:29.290] [info] [beep_ctrl.cpp:39] [1885] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[1970-01-01 08:00:29.292] [info] [beep_ctrl.cpp:137] [1885] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[1970-01-01 08:00:29.292] [info] [beep_ctrl.cpp:252] [1885] exec_cmd data 0 +[1970-01-01 08:00:29.294] [info] [beep_ctrl.cpp:171] [1885] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[1970-01-01 08:00:29.294] [info] [beep_ctrl.cpp:252] [1885] exec_cmd data 333333 +[1970-01-01 08:00:29.295] [info] [beep_ctrl.cpp:189] [1885] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[1970-01-01 08:00:29.295] [info] [beep_ctrl.cpp:252] [1885] exec_cmd data 166666 +[1970-01-01 08:00:29.295] [info] [beep_ctrl.cpp:207] [1885] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[1970-01-01 08:00:29.295] [info] [beep_ctrl.cpp:252] [1885] exec_cmd data normal +[1970-01-01 08:00:29.298] [info] [query_adc.cpp:36] [1885] QueryADC init success! +[1970-01-01 08:00:29.299] [info] [mmu.cpp:1442] [1885] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[1970-01-01 08:00:29.299] [info] [mmu.cpp:1460] [1885] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[1970-01-01 08:00:29.302] [info] [cavity_fan.cpp:36] [1885] PrinterFanCavity init! +[1970-01-01 08:00:29.302] [info] [cavity_fan.cpp:96] [1885] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[1970-01-01 08:00:29.303] [info] [cavity_fan.cpp:107] [1885] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[1970-01-01 08:00:29.303] [info] [cavity_fan.cpp:115] [1885] temp_drop_det_time 1 5 2 1.5 3 +[1970-01-01 08:00:29.304] [info] [fan.cpp:55] [1885] __func__:Fan #1 str_pin:PD17 +[1970-01-01 08:00:29.304] [info] [cavity_fan.cpp:119] [1885] PrinterFanCavity init success!! +[1970-01-01 08:00:29.305] [info] [stepper_enable.cpp:27] [1885] PrinterStepperEnable init! +[1970-01-01 08:00:29.307] [info] [fan.cpp:55] [1885] __func__:Fan #1 str_pin:PG15 +[1970-01-01 08:00:29.309] [info] [fan.cpp:55] [1885] __func__:Fan #1 str_pin:toolhead:PA8 +[1970-01-01 08:00:29.312] [info] [fan.cpp:55] [1885] __func__:Fan #1 str_pin:PD15 +[1970-01-01 08:00:29.322] [warning] [extras_factory.cpp:318] [1885] create extras: "g180_load_config" failer! +[1970-01-01 08:00:29.325] [info] [heater_bed.cpp:18] [1885] PrinterHeaterBed Init! +[1970-01-01 08:00:29.325] [info] [heaters.cpp:836] [1885] PrinterHeaters init! +[1970-01-01 08:00:29.326] [info] [heaters.cpp:861] [1885] PrinterHeaters init success! +[1970-01-01 08:00:29.368] [info] [heaters.cpp:897] [1885] c->get_name(): thermistor NTC 100K beta 3950 +[1970-01-01 08:00:29.368] [info] [thermistor.cpp:138] [1885] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[1970-01-01 08:00:29.468] [info] [heaters.cpp:897] [1885] c->get_name(): thermistor NTC 100K beta 3950 DSP +[1970-01-01 08:00:29.469] [info] [thermistor.cpp:138] [1885] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[1970-01-01 08:00:29.595] [info] [utilities.cpp:52] [1885] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[1970-01-01 08:00:29.597] [info] [thermistor.cpp:146] [1885] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[1970-01-01 08:00:29.598] [info] [heaters.cpp:897] [1885] c->get_name(): thermistor NTC 100K beta 4300 +[1970-01-01 08:00:29.598] [info] [thermistor.cpp:138] [1885] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[1970-01-01 08:00:29.599] [info] [heaters.cpp:897] [1885] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[1970-01-01 08:00:29.599] [info] [thermistor.cpp:138] [1885] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[1970-01-01 08:00:29.599] [info] [heaters.cpp:897] [1885] c->get_name(): thermistor NTC R25 350 +[1970-01-01 08:00:29.600] [info] [thermistor.cpp:138] [1885] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[1970-01-01 08:00:29.600] [info] [heaters.cpp:905] [1885] PrinterHeaters::load_config success! +[1970-01-01 08:00:29.600] [info] [heaters.cpp:994] [1885] setup_sensor success! +[1970-01-01 08:00:29.601] [info] [adc_temperature.cpp:29] [1885] __func__:PrinterADCtoTemperature name:heater_bed +[1970-01-01 08:00:29.602] [info] [adc_temperature.cpp:35] [1885] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[1970-01-01 08:00:29.602] [info] [adc_temperature.cpp:165] [1885] name:heater_bed +[1970-01-01 08:00:29.602] [info] [error_mcu.cpp:101] [1885] create PrinterMCUError success! +[1970-01-01 08:00:29.603] [info] [heaters.cpp:83] [1885] Heater init! name: heater_bed +[1970-01-01 08:00:29.604] [info] [heaters.cpp:119] [1885] __func__:Heater,heater_pin:PG13 +[1970-01-01 08:00:29.605] [info] [pid_calibrate.cpp:43] [1885] PIDCalibrate init success!! +[1970-01-01 08:00:29.607] [warning] [heaters.cpp:322] [1885] Heater init success!!!! +[1970-01-01 08:00:29.607] [warning] [heaters.cpp:947] [1885] debug name heater_bed, gcode_id B +[1970-01-01 08:00:29.608] [info] [heater_bed.cpp:41] [1885] PrinterHeaterBed Init success! +[1970-01-01 08:00:29.609] [info] [heater_fan.cpp:24] [1885] PrinterHeaterFan init! +[1970-01-01 08:00:29.610] [info] [fan.cpp:55] [1885] __func__:Fan #1 str_pin:toolhead:PB13 +[1970-01-01 08:00:29.612] [info] [heater_fan.cpp:46] [1885] PrinterHeaterFan init success!! +[1970-01-01 08:00:29.648] [info] [idle_timeout.cpp:28] [1885] init IdleTimeout ... +[1970-01-01 08:00:29.650] [info] [idle_timeout.cpp:72] [1885] init IdleTimeout success !!! +[1970-01-01 08:00:29.710] [info] [bulk_sensor.cpp:312] [1885] unpack_fmt:mqtt_strategy_->is_valid(): true +[2026-05-03 06:36:02.782] [info] [device_ui_message_handle.cpp:356] [1973] report_error: {"id":0,"report":{"error_code":2002,"error_level":3,"message":"connect mqtt success"}} +[2026-05-03 06:36:02.782] [info] [timer_manager.cpp:72] [1973] Adding timer task: WanStrategy_sync_device_info, interval: 100 ms, repeat: false +[2026-05-03 06:36:02.783] [info] [device_status.cpp:1445] [1973] post_all_dev_message +[2026-05-03 06:36:02.841] [info] [device_status.cpp:1459] [1973] post_all_dev_message {"canvas_info":{"active_canvas_id":0,"active_tray_id":-1,"auto_refill":false,"canvas_list":[{"canvas_id":0,"connected":1,"tray_list":[{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":0},{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":1},{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":2},{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":3}]}]},"device_assistant":{"status":1},"external_device":{"camera":true,"type":"0303","u_disk":false},"extruder":{"filament_detect_enable":1,"filament_detected":0,"target":0,"temperature":98},"fans":{"aux_fan":{"speed":0.0},"box_fan":{"speed":0.0},"controller_fan":{"speed":255.0},"fan":{"speed":0.0},"heater_fan":{"speed":255.0}},"foreign_object_detection":{"status":0},"gcode_move":{"extruder":0.0,"speed":1500,"speed_mode":1,"x":52.5,"y":264.0,"z":5.0},"heater_bed":{"target":0,"temperature":38},"led":{"status":1},"machine_status":{"exception_status":[],"progress":0,"status":1,"sub_status":0,"sub_status_reason_code":0},"mono_filament_info":{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":0},"print_status":{"bed_mesh_detect":false,"current_layer":0,"enable":false,"filament_detect":false,"filename":"","print_duration":0,"remaining_time_sec":0,"state":"","total_duration":0,"uuid":""},"spaghetti_detection":{"frequency":"medium","handing":"pause","status":0},"tool_head":{"homed_axes":"xyz"},"ztemperature_sensor":{"measured_max_temperature":0,"measured_min_temperature":0,"temperature":24}} +[2026-05-03 06:36:02.864] [info] [device_status.cpp:956] [1973] Report exception codes to cloud : {"exception":{"exception_code":{}},"meta_data":{"id":1777761362864}} +[2026-05-03 06:36:02.865] [info] [device_status.cpp:1119] [1973] get sync history tasks +[2026-05-03 06:36:02.865] [info] [device_status.cpp:1129] [1973] Total tasks: 0 +[2026-05-03 06:36:02.865] [warning] [mqtt_connector.cpp:400] [1973] No history tasks to sync. +[2026-05-03 06:36:02.866] [info] [mqtt_connector.cpp:295] [1973] Subscribed to topic: server/service/F01CFFQQFN55YKS/down +[2026-05-03 06:36:02.939] [info] [record_manager.cpp:1311] [1972] Starting sync +[2026-05-03 06:36:02.942] [info] [record_manager.cpp:1220] [1972] Syncing 8 files to server retry 0 +[2026-05-03 06:36:02.942] [info] [cloud_service_client.cpp:862] [1972] Batch adding files to server... +[2026-05-03 06:36:02.944] [info] [http_client.cpp:23] [1972] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch, msg: [{"colorMap":[{"color":"#000000","t":0,"type":"PLA"},{"color":"#FFFFFF","t":1,"type":"PLA"}],"createTime":2145799830,"filename":"ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode","lastPrintTime":0,"layer":30,"printTime":1048,"size":975620,"totalFilamentUsed":5.18,"totalPrintTimes":0,"type":"file"},{"colorMap":[{"color":"#FFFFFF","t":0,"type":"PLA"},{"color":"#000000","t":1,"type":"PLA"},{"color":"#FF0000","t":2,"type":"PLA"}],"createTime":2145799770,"filename":"ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode","lastPrintTime":0,"layer":17,"printTime":924,"size":916525,"totalFilamentUsed":3.22,"totalPrintTimes":0,"type":"file"},{"colorMap":[{"color":"#000000","t":0,"type":"PLA"},{"color":"#FFFFFF","t":1,"type":"PLA"}],"createTime":2145799710,"filename":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","lastPrintTime":0,"layer":225,"printTime":4998,"size":6055579,"totalFilamentUsed":42.11,"totalPrintTimes":0,"type":"file"},{"colorMap":[{"color":"#FFFFFF","t":0,"type":"PLA"},{"color":"#000000","t":1,"type":"PLA"},{"color":"#FF0000","t":2,"type":"PLA"},{"color":"#0000FF","t":3,"type":"PLA"}],"createTime":2145799650,"filename":"ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode","lastPrintTime":0,"layer":240,"printTime":2510,"size":4425269,"totalFilamentUsed":15.0,"totalPrintTimes":0,"type":"file"},{"colorMap":[{"color":"#FFFFFF","t":0,"type":"PLA"}],"createTime":2145799590,"filename":"ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode","lastPrintTime":0,"layer":1629,"printTime":19004,"size":97996914,"totalFilamentUsed":109.63,"totalPrintTimes":0,"type":"file"},{"colorMap":[{"color":"#36A8E1","t":0,"type":"PLA"}],"createTime":2145799530,"filename":"ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode","lastPrintTime":0,"layer":536,"printTime":6705,"size":3643155,"totalFilamentUsed":89.04,"totalPrintTimes":0,"type":"file"},{"colorMap":[{"color":"#FFFFFF","t":0,"type":"PLA"}],"createTime":2145799470,"filename":"ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode","lastPrintTime":0,"layer":227,"printTime":1547,"size":5190855,"totalFilamentUsed":9.83,"totalPrintTimes":0,"type":"file"},{"colorMap":[{"color":"#FFFFFF","t":0,"type":"PLA"}],"createTime":2145799410,"filename":"ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode","lastPrintTime":0,"layer":250,"printTime":1247,"size":3050042,"totalFilamentUsed":6.1,"totalPrintTimes":0,"type":"file"}] +[2026-05-03 06:36:03.275] [info] [cloud_service_client.cpp:869] [1972] Batch add files response: {"code":0,"data":true,"msg":"","traceId":"e6c296bd5f083454e92b54c668716a9f"} +[2026-05-03 06:36:03.275] [info] [cloud_service_client.cpp:875] [1972] Batch add files to server success, size 8 +[2026-05-03 06:36:03.276] [info] [sql_database.cpp:150] [1972] Update SQL: UPDATE file_details SET upload_flag = CASE filename WHEN ? THEN ? WHEN ? THEN ? WHEN ? THEN ? WHEN ? THEN ? WHEN ? THEN ? WHEN ? THEN ? WHEN ? THEN ? WHEN ? THEN ? ELSE upload_flag END WHERE filename IN (?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 06:36:03.387] [info] [cloud_service_client.cpp:704] [1972] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 06:36:03.388] [info] [http_client.cpp:141] [1972] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F2145799830-ECC2_0.4_Elegoo%20Nameplate_Elegoo%20PLA%20_0.2_17m28s.gcode.png +[2026-05-03 06:36:03.930] [info] [http_client.cpp:199] [2238] HTTP async request completed with status code: 200 +[2026-05-03 06:36:03.931] [info] [http_client.cpp:59] [1972] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F2145799830-ECC2_0.4_Elegoo%20Nameplate_Elegoo%20PLA%20_0.2_17m28s.gcode.png attempt result: 0 +[2026-05-03 06:36:03.932] [info] [cloud_service_client.cpp:706] [1972] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799830-ECC2_0.4_Elegoo%20Nameplate_Elegoo%20PLA%20_0.2_17m28s.gcode.png?x-oss-date=20260502T223603Z&x-oss-expires=86400&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=15a4ceea2730388dd62f736acc27ffce2aff395f259f5d5c043fb2a18fa940e9","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799830-ECC2_0.4_Elegoo%20Nameplate_Elegoo%20PLA%20_0.2_17m28s.gcode.png?x-oss-date=20260502T223603Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=01f616b16eced241adff80e2deebc04c0fe3cacc93b8cc24a80b3fdd4bdb7ab0","expireTime":1777763163,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/2145799830-ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode.png"},"msg":"","traceId":"93b65bc0700293920c34f8e549254a46"} +[2026-05-03 06:36:03.932] [info] [http_client.cpp:306] [1972] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799830-ECC2_0.4_Elegoo%20Nameplate_Elegoo%20PLA%20_0.2_17m28s.gcode.png?x-oss-date=20260502T223603Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=01f616b16eced241adff80e2deebc04c0fe3cacc93b8cc24a80b3fdd4bdb7ab0 +[2026-05-03 06:36:04.540] [info] [record_manager.cpp:1407] [1972] Uploading src_nameF01CFFQQFN55YKS/thumbnail/2145799830-ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode.png thumbnail for file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode to F01CFFQQFN55YKS/thumbnail/2145799830-ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode.png +[2026-05-03 06:36:04.540] [info] [record_manager.cpp:1348] [1972] Retrying 0 sync for thumbnail: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-03 06:36:04.541] [info] [cloud_service_client.cpp:885] [1972] Modify file info request: {"filename":"ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/2145799830-ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode.png"} +[2026-05-03 06:36:04.826] [info] [cloud_service_client.cpp:888] [1972] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"a05a33ea2db1e4a10c174a0b1ad38070"} +[2026-05-03 06:36:04.826] [info] [sql_database.cpp:120] [1972] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 06:36:04.952] [info] [sql_database.cpp:685] [1972] Set upload flag for thumbnail: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-03 06:36:04.955] [info] [cloud_service_client.cpp:704] [1972] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 06:36:04.956] [info] [http_client.cpp:141] [1972] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F2145799590-ECC2_0.4_Vase_Elegoo%20PLA%20_0.12_5h17m.gcode.png +[2026-05-03 06:36:05.123] [info] [http_client.cpp:199] [2238] HTTP async request completed with status code: 200 +[2026-05-03 06:36:05.125] [info] [http_client.cpp:59] [1972] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F2145799590-ECC2_0.4_Vase_Elegoo%20PLA%20_0.12_5h17m.gcode.png attempt result: 0 +[2026-05-03 06:36:05.125] [info] [cloud_service_client.cpp:706] [1972] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799590-ECC2_0.4_Vase_Elegoo%20PLA%20_0.12_5h17m.gcode.png?x-oss-date=20260502T223605Z&x-oss-expires=86400&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=6f6e65430653e6ca0d592d19f63301b9cb0f8505193ea6c5aca0b94a22a7cc63","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799590-ECC2_0.4_Vase_Elegoo%20PLA%20_0.12_5h17m.gcode.png?x-oss-date=20260502T223605Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=a68939ba0ab5792a2d114dfc52f6368c139e95f5f3675035a8df3e623c3cbffb","expireTime":1777763165,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/2145799590-ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode.png"},"msg":"","traceId":"feddb0a082e38d3eda1e2217c762ad50"} +[2026-05-03 06:36:05.126] [info] [http_client.cpp:306] [1972] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799590-ECC2_0.4_Vase_Elegoo%20PLA%20_0.12_5h17m.gcode.png?x-oss-date=20260502T223605Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=a68939ba0ab5792a2d114dfc52f6368c139e95f5f3675035a8df3e623c3cbffb +[2026-05-03 06:36:05.571] [info] [record_manager.cpp:1407] [1972] Uploading src_nameF01CFFQQFN55YKS/thumbnail/2145799590-ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode.png thumbnail for file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode to F01CFFQQFN55YKS/thumbnail/2145799590-ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode.png +[2026-05-03 06:36:05.571] [info] [record_manager.cpp:1348] [1972] Retrying 0 sync for thumbnail: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-03 06:36:05.571] [info] [cloud_service_client.cpp:885] [1972] Modify file info request: {"filename":"ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/2145799590-ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode.png"} +[2026-05-03 06:36:05.846] [info] [cloud_service_client.cpp:888] [1972] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"dd7129b2788619b3f8c31cba7abb180c"} +[2026-05-03 06:36:05.846] [info] [sql_database.cpp:120] [1972] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 06:36:05.865] [info] [sql_database.cpp:685] [1972] Set upload flag for thumbnail: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-03 06:36:05.867] [info] [cloud_service_client.cpp:704] [1972] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 06:36:05.867] [info] [http_client.cpp:141] [1972] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F2145799530-ECC2_0.4_CC2%20MINI%20Desk%20organizer_Elegoo%20PLA%20_0.2_1h52m.gcode.png +[2026-05-03 06:36:06.037] [info] [http_client.cpp:199] [2238] HTTP async request completed with status code: 200 +[2026-05-03 06:36:06.039] [info] [http_client.cpp:59] [1972] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F2145799530-ECC2_0.4_CC2%20MINI%20Desk%20organizer_Elegoo%20PLA%20_0.2_1h52m.gcode.png attempt result: 0 +[2026-05-03 06:36:06.040] [info] [cloud_service_client.cpp:706] [1972] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799530-ECC2_0.4_CC2%20MINI%20Desk%20organizer_Elegoo%20PLA%20_0.2_1h52m.gcode.png?x-oss-date=20260502T223605Z&x-oss-expires=86400&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=3583516a6978d607752d800af5e74d292e1794bc7b12c73340f05b316193d7a5","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799530-ECC2_0.4_CC2%20MINI%20Desk%20organizer_Elegoo%20PLA%20_0.2_1h52m.gcode.png?x-oss-date=20260502T223605Z&x-oss-expires=1799&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=3871777f9af5c257bdde70b599ceb6c08e3971f115a556ed1fdd69252682ec32","expireTime":1777763165,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/2145799530-ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode.png"},"msg":"","traceId":"d7c64698d3fcf4899a692c37433f97d1"} +[2026-05-03 06:36:06.040] [info] [http_client.cpp:306] [1972] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799530-ECC2_0.4_CC2%20MINI%20Desk%20organizer_Elegoo%20PLA%20_0.2_1h52m.gcode.png?x-oss-date=20260502T223605Z&x-oss-expires=1799&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=3871777f9af5c257bdde70b599ceb6c08e3971f115a556ed1fdd69252682ec32 +[2026-05-03 06:36:06.435] [info] [record_manager.cpp:1407] [1972] Uploading src_nameF01CFFQQFN55YKS/thumbnail/2145799530-ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode.png thumbnail for file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode to F01CFFQQFN55YKS/thumbnail/2145799530-ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode.png +[2026-05-03 06:36:06.435] [info] [record_manager.cpp:1348] [1972] Retrying 0 sync for thumbnail: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-03 06:36:06.435] [info] [cloud_service_client.cpp:885] [1972] Modify file info request: {"filename":"ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/2145799530-ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode.png"} +[2026-05-03 06:36:06.723] [info] [cloud_service_client.cpp:888] [1972] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"100ed3526761c5814c07e4472a168ad4"} +[2026-05-03 06:36:06.724] [info] [sql_database.cpp:120] [1972] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 06:36:06.736] [info] [sql_database.cpp:685] [1972] Set upload flag for thumbnail: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-03 06:36:06.738] [info] [cloud_service_client.cpp:704] [1972] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 06:36:06.738] [info] [http_client.cpp:141] [1972] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F2145799710-ECC2_0.4_Scraper_Elegoo%20PLA%20_0.2_1h23m.gcode.png +[2026-05-03 06:36:07.380] [info] [http_client.cpp:199] [2238] HTTP async request completed with status code: 200 +[2026-05-03 06:36:07.382] [info] [http_client.cpp:59] [1972] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F2145799710-ECC2_0.4_Scraper_Elegoo%20PLA%20_0.2_1h23m.gcode.png attempt result: 0 +[2026-05-03 06:36:07.382] [info] [cloud_service_client.cpp:706] [1972] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799710-ECC2_0.4_Scraper_Elegoo%20PLA%20_0.2_1h23m.gcode.png?x-oss-date=20260502T223607Z&x-oss-expires=86400&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=c25533ccea809981461f7bd05e7162297cd1726fbdc60bc3bf43f74ec092d82e","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799710-ECC2_0.4_Scraper_Elegoo%20PLA%20_0.2_1h23m.gcode.png?x-oss-date=20260502T223607Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=e8511efbf2b738bdcaf9aa8b895fbecb8d3555c5c08343830a31d35046b79dc5","expireTime":1777763167,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/2145799710-ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode.png"},"msg":"","traceId":"bdac062d4f3da7946586e3df15bec732"} +[2026-05-03 06:36:07.383] [info] [http_client.cpp:306] [1972] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799710-ECC2_0.4_Scraper_Elegoo%20PLA%20_0.2_1h23m.gcode.png?x-oss-date=20260502T223607Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=e8511efbf2b738bdcaf9aa8b895fbecb8d3555c5c08343830a31d35046b79dc5 +[2026-05-03 06:36:07.610] [info] [record_manager.cpp:1407] [1972] Uploading src_nameF01CFFQQFN55YKS/thumbnail/2145799710-ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode.png thumbnail for file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode to F01CFFQQFN55YKS/thumbnail/2145799710-ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode.png +[2026-05-03 06:36:07.610] [info] [record_manager.cpp:1348] [1972] Retrying 0 sync for thumbnail: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 06:36:07.610] [info] [cloud_service_client.cpp:885] [1972] Modify file info request: {"filename":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/2145799710-ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode.png"} +[2026-05-03 06:36:07.896] [info] [cloud_service_client.cpp:888] [1972] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"d0daae328bb5a750210c6acb97d5cbbc"} +[2026-05-03 06:36:07.896] [info] [sql_database.cpp:120] [1972] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 06:36:07.912] [info] [sql_database.cpp:685] [1972] Set upload flag for thumbnail: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 06:36:07.915] [info] [cloud_service_client.cpp:704] [1972] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 06:36:07.915] [info] [http_client.cpp:141] [1972] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F2145799470-ECC2_0.4_The%20Buddha_Elegoo%20PLA%20_0.2_25m47s.gcode.png +[2026-05-03 06:36:08.087] [info] [http_client.cpp:199] [2238] HTTP async request completed with status code: 200 +[2026-05-03 06:36:08.089] [info] [http_client.cpp:59] [1972] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F2145799470-ECC2_0.4_The%20Buddha_Elegoo%20PLA%20_0.2_25m47s.gcode.png attempt result: 0 +[2026-05-03 06:36:08.089] [info] [cloud_service_client.cpp:706] [1972] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799470-ECC2_0.4_The%20Buddha_Elegoo%20PLA%20_0.2_25m47s.gcode.png?x-oss-date=20260502T223608Z&x-oss-expires=86399&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=d63b7185c269f11b7c72cd694dc8e1d5f2317f0762ca0060e905bc114184fa9e","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799470-ECC2_0.4_The%20Buddha_Elegoo%20PLA%20_0.2_25m47s.gcode.png?x-oss-date=20260502T223608Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=279ef035a9142a0496db8b84a3b1a5203bdec7b81d08870404d5c9b65adfbd82","expireTime":1777763168,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/2145799470-ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode.png"},"msg":"","traceId":"b724925dc12c19653fec86e73c51c3c4"} +[2026-05-03 06:36:08.090] [info] [http_client.cpp:306] [1972] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799470-ECC2_0.4_The%20Buddha_Elegoo%20PLA%20_0.2_25m47s.gcode.png?x-oss-date=20260502T223608Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=279ef035a9142a0496db8b84a3b1a5203bdec7b81d08870404d5c9b65adfbd82 +[2026-05-03 06:36:08.332] [info] [record_manager.cpp:1407] [1972] Uploading src_nameF01CFFQQFN55YKS/thumbnail/2145799470-ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode.png thumbnail for file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode to F01CFFQQFN55YKS/thumbnail/2145799470-ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode.png +[2026-05-03 06:36:08.332] [info] [record_manager.cpp:1348] [1972] Retrying 0 sync for thumbnail: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-03 06:36:08.333] [info] [cloud_service_client.cpp:885] [1972] Modify file info request: {"filename":"ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/2145799470-ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode.png"} +[2026-05-03 06:36:08.616] [info] [cloud_service_client.cpp:888] [1972] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"a172d798f0d02dd43baa7cae3d9abaed"} +[2026-05-03 06:36:08.617] [info] [sql_database.cpp:120] [1972] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 06:36:08.634] [info] [sql_database.cpp:685] [1972] Set upload flag for thumbnail: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-03 06:36:08.637] [info] [cloud_service_client.cpp:704] [1972] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 06:36:08.638] [info] [http_client.cpp:141] [1972] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F2145799650-ECC2_0.4_3DBenchy_Elegoo%20PLA%20_0.2_41m50s.gcode.png +[2026-05-03 06:36:09.255] [info] [http_client.cpp:199] [2238] HTTP async request completed with status code: 200 +[2026-05-03 06:36:09.256] [info] [http_client.cpp:59] [1972] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F2145799650-ECC2_0.4_3DBenchy_Elegoo%20PLA%20_0.2_41m50s.gcode.png attempt result: 0 +[2026-05-03 06:36:09.257] [info] [cloud_service_client.cpp:706] [1972] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799650-ECC2_0.4_3DBenchy_Elegoo%20PLA%20_0.2_41m50s.gcode.png?x-oss-date=20260502T223609Z&x-oss-expires=86400&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=b1963d34323d9efd51446efb35a7f1dbcef10372e2359122bfd0433fc0377583","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799650-ECC2_0.4_3DBenchy_Elegoo%20PLA%20_0.2_41m50s.gcode.png?x-oss-date=20260502T223609Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=a049c436f2e3cacf101457442e0a8e644840f3c71b3db74655161a31b9b41710","expireTime":1777763169,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/2145799650-ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode.png"},"msg":"","traceId":"a965769e85652a07a9215e37a7e3ce7a"} +[2026-05-03 06:36:09.257] [info] [http_client.cpp:306] [1972] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799650-ECC2_0.4_3DBenchy_Elegoo%20PLA%20_0.2_41m50s.gcode.png?x-oss-date=20260502T223609Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=a049c436f2e3cacf101457442e0a8e644840f3c71b3db74655161a31b9b41710 +[2026-05-03 06:36:09.493] [info] [record_manager.cpp:1407] [1972] Uploading src_nameF01CFFQQFN55YKS/thumbnail/2145799650-ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode.png thumbnail for file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode to F01CFFQQFN55YKS/thumbnail/2145799650-ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode.png +[2026-05-03 06:36:09.493] [info] [record_manager.cpp:1348] [1972] Retrying 0 sync for thumbnail: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-03 06:36:09.493] [info] [cloud_service_client.cpp:885] [1972] Modify file info request: {"filename":"ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/2145799650-ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode.png"} +[2026-05-03 06:36:09.776] [info] [cloud_service_client.cpp:888] [1972] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"01d986bcc19f2c8eeda6609208acc1c1"} +[2026-05-03 06:36:09.777] [info] [sql_database.cpp:120] [1972] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 06:36:09.792] [info] [sql_database.cpp:685] [1972] Set upload flag for thumbnail: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-03 06:36:09.794] [info] [cloud_service_client.cpp:704] [1972] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 06:36:09.794] [info] [http_client.cpp:141] [1972] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F2145799410-ECC2_0.4_PTFE%20Tube%20Tool_Elegoo%20PLA%20_0.2_20m47s.gcode.png +[2026-05-03 06:36:10.341] [info] [http_client.cpp:199] [2238] HTTP async request completed with status code: 200 +[2026-05-03 06:36:10.342] [info] [http_client.cpp:59] [1972] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F2145799410-ECC2_0.4_PTFE%20Tube%20Tool_Elegoo%20PLA%20_0.2_20m47s.gcode.png attempt result: 0 +[2026-05-03 06:36:10.343] [info] [cloud_service_client.cpp:706] [1972] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799410-ECC2_0.4_PTFE%20Tube%20Tool_Elegoo%20PLA%20_0.2_20m47s.gcode.png?x-oss-date=20260502T223610Z&x-oss-expires=86400&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=6426293f6e3a331329392eb6e5ee550ef2ade1cfa8ac4dcd0cfa344e8ae56de6","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799410-ECC2_0.4_PTFE%20Tube%20Tool_Elegoo%20PLA%20_0.2_20m47s.gcode.png?x-oss-date=20260502T223610Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=629f7a3c156e56759d2a98ffb1af2e3797def95a60ce2b9a959bd2b645303790","expireTime":1777763170,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/2145799410-ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode.png"},"msg":"","traceId":"e9b4466d2aea27656a98fb857d9533f6"} +[2026-05-03 06:36:10.343] [info] [http_client.cpp:306] [1972] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799410-ECC2_0.4_PTFE%20Tube%20Tool_Elegoo%20PLA%20_0.2_20m47s.gcode.png?x-oss-date=20260502T223610Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=629f7a3c156e56759d2a98ffb1af2e3797def95a60ce2b9a959bd2b645303790 +[2026-05-03 06:36:10.588] [info] [record_manager.cpp:1407] [1972] Uploading src_nameF01CFFQQFN55YKS/thumbnail/2145799410-ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode.png thumbnail for file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode to F01CFFQQFN55YKS/thumbnail/2145799410-ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode.png +[2026-05-03 06:36:10.588] [info] [record_manager.cpp:1348] [1972] Retrying 0 sync for thumbnail: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-03 06:36:10.589] [info] [cloud_service_client.cpp:885] [1972] Modify file info request: {"filename":"ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/2145799410-ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode.png"} +[2026-05-03 06:36:10.884] [info] [cloud_service_client.cpp:888] [1972] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"85b59a99e0f01da01f097b5f2b942198"} +[2026-05-03 06:36:10.884] [info] [sql_database.cpp:120] [1972] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 06:36:10.900] [info] [sql_database.cpp:685] [1972] Set upload flag for thumbnail: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-03 06:36:10.902] [info] [cloud_service_client.cpp:704] [1972] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 06:36:10.902] [info] [http_client.cpp:141] [1972] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F2145799770-ECC2_0.4_Otter_Elegoo%20PLA%20_0.2_15m24s.gcode.png +[2026-05-03 06:36:11.556] [info] [http_client.cpp:199] [2238] HTTP async request completed with status code: 200 +[2026-05-03 06:36:11.558] [info] [http_client.cpp:59] [1972] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F2145799770-ECC2_0.4_Otter_Elegoo%20PLA%20_0.2_15m24s.gcode.png attempt result: 0 +[2026-05-03 06:36:11.558] [info] [cloud_service_client.cpp:706] [1972] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799770-ECC2_0.4_Otter_Elegoo%20PLA%20_0.2_15m24s.gcode.png?x-oss-date=20260502T223611Z&x-oss-expires=86400&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=c84a2cba9ff966d8caf5b2fff1d9d236808895a48b5e0d6d1515f76d933f29b0","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799770-ECC2_0.4_Otter_Elegoo%20PLA%20_0.2_15m24s.gcode.png?x-oss-date=20260502T223611Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=9386c9eed35774c118f2fc861a6309dbeb0500f557d97c965c6950cbb242c665","expireTime":1777763171,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/2145799770-ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode.png"},"msg":"","traceId":"f94cc18d5a333e74b861574072ea9df6"} +[2026-05-03 06:36:11.559] [info] [http_client.cpp:306] [1972] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/2145799770-ECC2_0.4_Otter_Elegoo%20PLA%20_0.2_15m24s.gcode.png?x-oss-date=20260502T223611Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260502%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=9386c9eed35774c118f2fc861a6309dbeb0500f557d97c965c6950cbb242c665 +[2026-05-03 06:36:11.946] [info] [record_manager.cpp:1407] [1972] Uploading src_nameF01CFFQQFN55YKS/thumbnail/2145799770-ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode.png thumbnail for file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode to F01CFFQQFN55YKS/thumbnail/2145799770-ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode.png +[2026-05-03 06:36:11.947] [info] [record_manager.cpp:1348] [1972] Retrying 0 sync for thumbnail: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-03 06:36:11.947] [info] [cloud_service_client.cpp:885] [1972] Modify file info request: {"filename":"ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/2145799770-ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode.png"} +[2026-05-03 06:36:12.218] [info] [cloud_service_client.cpp:888] [1972] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"926e343fbee9a46fc139e72ea7c9f642"} +[2026-05-03 06:36:12.219] [info] [sql_database.cpp:120] [1972] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 06:36:12.234] [info] [sql_database.cpp:685] [1972] Set upload flag for thumbnail: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-03 06:36:12.235] [info] [record_manager.cpp:1293] [1972] Syncing exception messages to server retry 0 +[2026-05-03 06:36:12.265] [info] [sql_database.cpp:120] [1972] Update SQL: UPDATE exception_message SET upload_flag = ?; +[2026-05-03 06:36:36.662] [info] [heaters.cpp:405] [1955] __func__:temperature_callback,heater_name:heater_bed,read_time:240.27800000038,last_temp:38.05444632635874,temp:38.05444632635874,target_temp:0,smoothed_temp:38.0743138653074 +[2026-05-03 06:36:42.805] [info] [heaters.cpp:405] [1963] __func__:temperature_callback,heater_name:extruder,read_time:246.42091131539516,last_temp:85.82025979305524,temp:85.82025979305524,target_temp:0,smoothed_temp:85.97205028017866 +[2026-05-03 06:37:11.624] [info] [mmu.cpp:4164] [1885] configuration of device consumable information +[2026-05-03 06:37:11.685] [info] [mmu.cpp:4183] [1885] CMD_canvas_set_filament_info type PLA detailed_type PLA color 0x000000 +[2026-05-03 06:37:11.686] [info] [webhooks.cpp:170] [1885] return total: {"id":44,"result":{}} +[2026-05-03 06:37:11.763] [info] [mmu.cpp:1926] [2283] save record info success +[2026-05-03 06:37:34.115] [error] [tmc_uart.cpp:319] [1885] _decode_read error #1 +[2026-05-03 06:37:58.039] [info] [device_status.cpp:1483] [1885] Device status change to: 3, last status: 1 +[2026-05-03 06:37:58.100] [info] [mmu.cpp:3828] [1885] Execute filament feeding into the extruder head. channel 0 +[2026-05-03 06:37:58.100] [info] [mmu.cpp:2068] [1885] {"command":"CANVAS_FEEDING_FILA_REQUEST","result":"0"} +[2026-05-03 06:37:58.100] [info] [mmu.cpp:2068] [1885] {"command":"M2202","result":"1150"} +[2026-05-03 06:37:58.101] [info] [device_status.cpp:832] [1885] M2202 result_code:1150 +[2026-05-03 06:37:58.102] [info] [mmu.cpp:2068] [1885] {"command":"M2202","result":"1151"} +[2026-05-03 06:37:58.102] [info] [device_status.cpp:832] [1885] M2202 result_code:1151 +[2026-05-03 06:37:58.103] [info] [mmu.cpp:4082] [1885] Move to waste box +[2026-05-03 06:37:58.104] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:37:58.104] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:37:58.104] [info] [gcode.cpp:544] [1885] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 06:37:58.104] [info] [heaters.cpp:312] [1885] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 06:37:58.105] [info] [extruder.cpp:501] [1885] cmd_M104 temp 250 index -1 wait false +[2026-05-03 06:37:58.105] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:250,wait:false +[2026-05-03 06:37:58.407] [info] [homing_override.cpp:238] [1885] need true true false homed true true true +[2026-05-03 06:37:58.436] [info] [gcode_move.cpp:52] [1885] G180 select 800 +[2026-05-03 06:37:58.465] [info] [gcode.cpp:957] [1885] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=68.96658761188567 +[2026-05-03 06:37:58.465] [info] [gcode.cpp:1053] [1885] cmd_SET_CONDITION is_ingore = false +[2026-05-03 06:37:58.466] [info] [device_status.cpp:832] [1885] M2202 result_code:1045 +[2026-05-03 06:37:58.467] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:37:58.467] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:37:58.467] [info] [gcode.cpp:544] [1885] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 06:37:58.467] [info] [heaters.cpp:312] [1885] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 06:37:58.467] [info] [extruder.cpp:501] [1885] cmd_M104 temp 140 index -1 wait true +[2026-05-03 06:37:58.467] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:140,wait:true +[2026-05-03 06:37:58.481] [info] [verify_heater.cpp:164] [1885] Heater extruder approaching new target of 140 +[2026-05-03 06:38:12.498] [info] [verify_heater.cpp:140] [1885] Heater extruder within range of 140 +[2026-05-03 06:38:19.482] [info] [device_status.cpp:832] [1885] M2202 result_code:1066 +[2026-05-03 06:38:19.484] [info] [heaters.cpp:1198] [1885] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 06:38:19.484] [info] [gcode.cpp:1074] [1885] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 06:38:19.486] [info] [device_status.cpp:832] [1885] M2202 result_code:1045 +[2026-05-03 06:38:19.488] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:38:19.488] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:38:19.488] [info] [gcode.cpp:544] [1885] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 06:38:19.489] [info] [heaters.cpp:312] [1885] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 06:38:19.489] [info] [extruder.cpp:501] [1885] cmd_M104 temp 250 index -1 wait true +[2026-05-03 06:38:19.489] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:250,wait:true +[2026-05-03 06:38:19.513] [info] [verify_heater.cpp:164] [1885] Heater extruder approaching new target of 250 +[2026-05-03 06:38:37.161] [info] [heaters.cpp:405] [1955] __func__:temperature_callback,heater_name:heater_bed,read_time:360.77800000037996,last_temp:36.51964461853299,temp:36.51964461853299,target_temp:0,smoothed_temp:36.54027879835593 +[2026-05-03 06:38:42.806] [info] [heaters.cpp:405] [1963] __func__:temperature_callback,heater_name:extruder,read_time:366.4222873038485,last_temp:219.78655696065704,temp:219.78655696065704,target_temp:250,smoothed_temp:218.2649120670549 +[2026-05-03 06:38:53.555] [info] [verify_heater.cpp:140] [1885] Heater extruder within range of 250 +[2026-05-03 06:38:57.511] [info] [device_status.cpp:832] [1885] M2202 result_code:1066 +[2026-05-03 06:38:57.513] [info] [heaters.cpp:1198] [1885] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 250 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 06:38:57.513] [info] [mmu.cpp:2068] [1885] {"command":"M2202","result":"1152"} +[2026-05-03 06:38:57.514] [info] [device_status.cpp:832] [1885] M2202 result_code:1152 +[2026-05-03 06:38:57.515] [info] [mmu.cpp:2493] [1885] start extrude channel check. +[2026-05-03 06:38:57.515] [info] [mmu.cpp:2502] [1885] extrude channel check result: -1 ex_fila_status:0 +[2026-05-03 06:38:57.515] [info] [mmu.cpp:2068] [1885] {"command":"M2202","result":"1153"} +[2026-05-03 06:38:57.515] [info] [device_status.cpp:832] [1885] M2202 result_code:1153 +[2026-05-03 06:38:57.517] [info] [mmu.cpp:4201] [1885] Extruder head filament sensor not triggered +[2026-05-03 06:38:57.517] [info] [mmu.cpp:2068] [1885] {"command":"M2202","result":"1154"} +[2026-05-03 06:38:57.517] [info] [device_status.cpp:832] [1885] M2202 result_code:1154 +[2026-05-03 06:38:57.519] [info] [mmu.cpp:4243] [1885] Extruder head filament sensor not triggered +[2026-05-03 06:38:57.519] [info] [mmu.cpp:3853] [1885] channel 0 cur_temp 250.70366129668662 pre_set_temp 230 +[2026-05-03 06:38:57.520] [info] [mmu.cpp:2068] [1885] {"command":"M2202","result":"1155"} +[2026-05-03 06:38:57.520] [info] [device_status.cpp:832] [1885] M2202 result_code:1155 +[2026-05-03 06:38:57.522] [info] [mmu.cpp:4330] [1885] Execute filament plug in process. channel: 0 +[2026-05-03 06:38:57.522] [info] [mmu.cpp:2859] [1885] exec auto refill filament start, befor_channel 0 ex_fila_status 0 canvas_status 1 +[2026-05-03 06:38:57.522] [info] [mmu.cpp:2911] [1885] exec auto refill filament over, after_channel 0 ex_fila_status 0 canvas_status 1 +[2026-05-03 06:38:57.522] [info] [mmu.cpp:2356] [1885] feed last_pos_1 channel: 0 ch_1: 1024.7246917479188 ch_2: 0 ch_3: 0 ch_4: 0 +[2026-05-03 06:39:15.892] [info] [filament_switch_sensor.cpp:332] [1885] _button_handler switch_fila_det true +[2026-05-03 06:39:15.893] [info] [mmu.cpp:2068] [1885] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-03 06:39:15.984] [info] [mcu.cpp:712] [1885] set_digital pin PB7 399.8504497916667 424.804336452 +[2026-05-03 06:39:16.144] [error] [tmc.cpp:359] [1885] TMC extruder reports GSTAT: 10000000 reset=1(Reset) +[2026-05-03 06:39:16.892] [info] [mmu.cpp:2395] [1885] feed last_pos_2 channel: 0 ch_1: 1668.499858321539 ch_2: 0 ch_3: 0 ch_4: 0 +[2026-05-03 06:39:16.917] [info] [gcode_move.cpp:52] [1885] G180 select 820 +[2026-05-03 06:39:21.249] [info] [mmu.cpp:4396] [1885] Execute rocker arm action +[2026-05-03 06:39:22.282] [info] [mmu.cpp:4407] [1885] Execute rocker arm action complete, dir 1 channel: 0 +[2026-05-03 06:39:22.282] [info] [mmu.cpp:2400] [1885] retry_count 1 last_position 1668.499858321539 ch_position 1674.406052510288 +[2026-05-03 06:39:22.282] [info] [mmu.cpp:2406] [1885] feed cur_pos_2 channel: 0 ch_1: 1674.406052510288 ch_2: 0 ch_3: 0 ch_4: 0 +[2026-05-03 06:39:22.283] [info] [gcode_move.cpp:52] [1885] G180 select 820 +[2026-05-03 06:39:26.614] [info] [mmu.cpp:4396] [1885] Execute rocker arm action +[2026-05-03 06:39:27.615] [info] [mmu.cpp:4407] [1885] Execute rocker arm action complete, dir 1 channel: 0 +[2026-05-03 06:39:27.615] [info] [mmu.cpp:2400] [1885] retry_count 2 last_position 1668.499858321539 ch_position 1683.265343793411 +[2026-05-03 06:39:27.616] [info] [mmu.cpp:2406] [1885] feed cur_pos_2 channel: 0 ch_1: 1683.265343793411 ch_2: 0 ch_3: 0 ch_4: 0 +[2026-05-03 06:39:27.648] [info] [mmu.cpp:2423] [1885] extruder_feed success, channel = 0 +[2026-05-03 06:39:27.648] [info] [mmu.cpp:4340] [1885] Execute filament plug in process complete. channel: 0 +[2026-05-03 06:39:27.649] [info] [mmu.cpp:2068] [1885] {"command":"M2202","result":"1156"} +[2026-05-03 06:39:27.649] [info] [device_status.cpp:832] [1885] M2202 result_code:1156 +[2026-05-03 06:39:27.651] [info] [mmu.cpp:4097] [1885] clean wastet filament +[2026-05-03 06:39:27.651] [info] [gcode_move.cpp:52] [1885] G180 select 812 +[2026-05-03 06:39:40.725] [info] [gcode_move.cpp:52] [1885] G180 select 818 +[2026-05-03 06:39:40.726] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.08117089286781304 +[2026-05-03 06:39:44.778] [info] [extruder.cpp:501] [1885] cmd_M104 temp 0 index -1 wait false +[2026-05-03 06:39:44.778] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:0,wait:false +[2026-05-03 06:39:44.779] [info] [mmu.cpp:2068] [1885] {"command":"M2202","result":"1157"} +[2026-05-03 06:39:44.779] [info] [device_status.cpp:832] [1885] M2202 result_code:1157 +[2026-05-03 06:39:44.783] [info] [mmu.cpp:4752] [1885] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 06:39:44.783] [info] [gcode.cpp:544] [1885] respond_ecode: , error_code: 1210 error_level 3 +[2026-05-03 06:39:44.783] [info] [gcode.cpp:544] [1885] respond_ecode: , error_code: 1211 error_level 3 +[2026-05-03 06:39:44.784] [info] [gcode.cpp:544] [1885] respond_ecode: , error_code: 1220 error_level 3 +[2026-05-03 06:39:44.786] [info] [gcode.cpp:544] [1885] respond_ecode: , error_code: 1231 error_level 3 +[2026-05-03 06:39:44.787] [info] [gcode.cpp:544] [1885] respond_ecode: , error_code: 1232 error_level 3 +[2026-05-03 06:39:44.787] [info] [gcode.cpp:544] [1885] respond_ecode: , error_code: 1241 error_level 3 +[2026-05-03 06:39:44.788] [info] [gcode.cpp:544] [1885] respond_ecode: , error_code: 1242 error_level 3 +[2026-05-03 06:39:44.788] [info] [gcode.cpp:544] [1885] respond_ecode: , error_code: 1243 error_level 3 +[2026-05-03 06:39:44.788] [info] [gcode.cpp:544] [1885] respond_ecode: , error_code: 1251 error_level 3 +[2026-05-03 06:39:44.789] [info] [gcode.cpp:544] [1885] respond_ecode: , error_code: 1252 error_level 3 +[2026-05-03 06:39:44.789] [info] [gcode.cpp:544] [1885] respond_ecode: , error_code: 1265 error_level 3 +[2026-05-03 06:39:44.861] [info] [mmu.cpp:4747] [1885] clear_abnormal_feedback #1 __OVER +[2026-05-03 06:39:44.862] [info] [mmu.cpp:3876] [1885] Execute filament feeding into the extruder head, complete. channel 0 +[2026-05-03 06:39:44.862] [info] [webhooks.cpp:170] [1885] return total: {"id":45,"result":{}} +[2026-05-03 06:39:52.450] [info] [filament_motion_sensor.cpp:154] [1885] CMD_encoder_sensor_switch:true +[2026-05-03 06:39:52.452] [info] [webhooks.cpp:170] [1885] return total: {"id":46,"result":{}} +[2026-05-03 06:40:37.661] [info] [heaters.cpp:405] [1955] __func__:temperature_callback,heater_name:heater_bed,read_time:481.27800000037996,last_temp:35.14580501658969,temp:35.14580501658969,target_temp:0,smoothed_temp:35.14557867950704 +[2026-05-03 06:40:42.807] [info] [heaters.cpp:405] [1963] __func__:temperature_callback,heater_name:extruder,read_time:486.4236901916835,last_temp:190.5892038818116,temp:190.5892038818116,target_temp:0,smoothed_temp:190.96651753500123 +[2026-05-03 06:40:56.333] [info] [device_ui_message_handle.cpp:170] [1885] Handling device manage request {"script":"onekey_self_check","status":"start"} +[2026-05-03 06:40:56.333] [info] [device_status.cpp:1483] [1885] Device status change to: 8, last status: 1 +[2026-05-03 06:40:56.334] [info] [webhooks.cpp:768] [1885] return handle_device_manage: null +[2026-05-03 06:40:56.335] [info] [webhooks.cpp:170] [1885] return total: {"id":47,"result":{}} +[2026-05-03 06:40:57.413] [info] [homing_override.cpp:238] [1885] need false false false homed true true true +[2026-05-03 06:40:57.414] [info] [device_status.cpp:832] [1885] M2202 result_code:2801 +[2026-05-03 06:40:57.416] [info] [homing_override.cpp:166] [1885] homing_ready axis z +[2026-05-03 06:40:57.669] [info] [homing_override.cpp:175] [1885] homing_ready #2: endstop name z state false +[2026-05-03 06:40:57.954] [info] [gcode.cpp:559] [1885] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 06:40:58.229] [info] [gcode.cpp:559] [1885] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 06:40:58.231] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:52.500 Y:264.000 Z:5.000 E:98.500 +[2026-05-03 06:40:58.249] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:40:58.331] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.030087799288292784 +[2026-05-03 06:40:58.373] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 649.75 +[2026-05-03 06:40:58.373] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 121.75 +[2026-05-03 06:40:58.373] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 5.081170892867813 +[2026-05-03 06:40:58.731] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:40:58.741] [warning] [tmc.cpp:887] [1885] Stepper stepper_x phase change (was 3 now -61) +[2026-05-03 06:40:58.753] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:12056348364 +[2026-05-03 06:40:58.753] [info] [homing.cpp:266] [1885] endstop_name x tt 502.34764083333334 trigger_time 502.34764083333334 move_end_print_time 502.60265491666667 +[2026-05-03 06:40:58.754] [info] [homing.cpp:266] [1885] endstop_name x tt 502.34764083333334 trigger_time 502.34764083333334 move_end_print_time 502.60265491666667 +[2026-05-03 06:40:58.754] [info] [homing.cpp:309] [1885] stepper_name stepper_x over_steps 0 halt_pos 5172 start_pos 5509 trig_pos 5172 +[2026-05-03 06:40:58.754] [info] [homing.cpp:309] [1885] stepper_name stepper_y over_steps 0 halt_pos -22699 start_pos -22362 trig_pos -22699 +[2026-05-03 06:40:58.809] [info] [gcode.cpp:544] [1885] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 06:40:58.810] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:40:59.416] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:264.000 Z:5.051 E:98.500 +[2026-05-03 06:40:59.417] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:264.000 Z:5.051 E:98.500 +[2026-05-03 06:40:59.418] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:40:59.448] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 414 +[2026-05-03 06:40:59.448] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -398 +[2026-05-03 06:40:59.448] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 5.081170892867813 +[2026-05-03 06:41:04.172] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:41:04.189] [warning] [tmc.cpp:887] [1885] Stepper stepper_x phase change (was -61 now 3) +[2026-05-03 06:41:04.192] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:12186923123 +[2026-05-03 06:41:04.192] [info] [homing.cpp:266] [1885] endstop_name y tt 507.78825579166664 trigger_time 507.78825579166664 move_end_print_time 508.040046875 +[2026-05-03 06:41:04.192] [info] [homing.cpp:266] [1885] endstop_name y tt 507.78825579166664 trigger_time 507.78825579166664 move_end_print_time 508.040046875 +[2026-05-03 06:41:04.192] [info] [homing.cpp:309] [1885] stepper_name stepper_y over_steps 1 halt_pos -537 start_pos -21896 trig_pos -538 +[2026-05-03 06:41:04.192] [info] [homing.cpp:309] [1885] stepper_name stepper_x over_steps -1 halt_pos -15384 start_pos 5975 trig_pos -15383 +[2026-05-03 06:41:04.193] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.026837020514185198 +[2026-05-03 06:41:04.277] [info] [gcode.cpp:544] [1885] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 06:41:04.278] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:41:04.785] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:7.988 Z:5.054 E:98.500 +[2026-05-03 06:41:04.786] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:7.988 Z:5.054 E:98.500 +[2026-05-03 06:41:04.787] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:41:04.818] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 393.73754 +[2026-05-03 06:41:04.818] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 377.76246 +[2026-05-03 06:41:04.818] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 5.081170892867813 +[2026-05-03 06:41:06.111] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:41:06.131] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:12233475148 +[2026-05-03 06:41:06.132] [info] [homing.cpp:266] [1885] endstop_name x tt 509.7279235 trigger_time 509.7279235 move_end_print_time 509.97962291666664 +[2026-05-03 06:41:06.132] [info] [homing.cpp:266] [1885] endstop_name x tt 509.7279235 trigger_time 509.7279235 move_end_print_time 509.97962291666664 +[2026-05-03 06:41:06.132] [info] [homing.cpp:309] [1885] stepper_name stepper_x over_steps 0 halt_pos -19420 start_pos -14581 trig_pos -19420 +[2026-05-03 06:41:06.132] [info] [homing.cpp:309] [1885] stepper_name stepper_y over_steps 0 halt_pos -6179 start_pos -1340 trig_pos -6179 +[2026-05-03 06:41:06.163] [info] [gcode.cpp:544] [1885] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 06:41:06.164] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:41:06.771] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:7.988 Z:5.054 E:98.500 +[2026-05-03 06:41:06.772] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:7.988 Z:5.054 E:98.500 +[2026-05-03 06:41:06.772] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:41:06.805] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 414 +[2026-05-03 06:41:06.805] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -398 +[2026-05-03 06:41:06.805] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 5.081170892867813 +[2026-05-03 06:41:07.258] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:41:07.277] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:12260997510 +[2026-05-03 06:41:07.278] [info] [homing.cpp:266] [1885] endstop_name y tt 510.87468858333335 trigger_time 510.87468858333335 move_end_print_time 511.126372625 +[2026-05-03 06:41:07.278] [info] [homing.cpp:266] [1885] endstop_name y tt 510.87468858333335 trigger_time 510.87468858333335 move_end_print_time 511.126372625 +[2026-05-03 06:41:07.278] [info] [homing.cpp:309] [1885] stepper_name stepper_y over_steps 1 halt_pos -4585 start_pos -5376 trig_pos -4586 +[2026-05-03 06:41:07.278] [info] [homing.cpp:309] [1885] stepper_name stepper_x over_steps -1 halt_pos -19408 start_pos -18617 trig_pos -19407 +[2026-05-03 06:41:07.309] [info] [gcode.cpp:544] [1885] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 06:41:07.310] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:41:07.312] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:7.988 Z:5.054 E:98.500 +[2026-05-03 06:41:07.862] [info] [gcode.cpp:559] [1885] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 06:41:08.141] [info] [gcode.cpp:559] [1885] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 06:41:08.142] [info] [homing_override.cpp:395] [1885] manual_move z start +[2026-05-03 06:41:08.143] [info] [homing_override.cpp:397] [1885] manual_move z over +[2026-05-03 06:41:08.143] [info] [homing_override.cpp:418] [1885] prev_G28 z start +[2026-05-03 06:41:08.181] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 316.5 +[2026-05-03 06:41:08.181] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -211.5 +[2026-05-03 06:41:08.181] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 387 +[2026-05-03 06:41:10.228] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:41:10.260] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:12332267208 +[2026-05-03 06:41:10.261] [info] [homing.cpp:266] [1885] endstop_name z tt 513.844217 trigger_time 513.844217 move_end_print_time 514.1022170065012 +[2026-05-03 06:41:10.261] [info] [homing.cpp:309] [1885] stepper_name stepper_z over_steps 0 halt_pos -101386 start_pos -99358 trig_pos -101386 +[2026-05-03 06:41:10.261] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.023190598901787207 +[2026-05-03 06:41:10.264] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 316.5 +[2026-05-03 06:41:10.264] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -211.5 +[2026-05-03 06:41:10.264] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 4 +[2026-05-03 06:41:11.235] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:41:11.263] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:12356455622 +[2026-05-03 06:41:11.264] [info] [homing.cpp:266] [1885] endstop_name z tt 514.8518175833333 trigger_time 514.8518175833333 move_end_print_time 515.1165305416666 +[2026-05-03 06:41:11.264] [info] [homing.cpp:309] [1885] stepper_name stepper_z over_steps 0 halt_pos -101384 start_pos -100586 trig_pos -101384 +[2026-05-03 06:41:11.265] [info] [z_compensation.cpp:264] [1885] ZCompensation handle_home_rails_end +[2026-05-03 06:41:11.265] [info] [z_compensation.cpp:92] [1885] use_fix_ref_temperature true fix_ref_temperature 140 ref_temperature 170.0456365134153 +[2026-05-03 06:41:11.265] [info] [gcode.cpp:544] [1885] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 06:41:11.267] [info] [homing_override.cpp:420] [1885] prev_G28 z over +[2026-05-03 06:41:11.267] [info] [homing_override.cpp:422] [1885] manual_move z start +[2026-05-03 06:41:11.267] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.022644991837062034 +[2026-05-03 06:41:11.267] [info] [homing_override.cpp:434] [1885] manual_move z over +[2026-05-03 06:41:11.268] [info] [device_status.cpp:832] [1885] M2202 result_code:2802 +[2026-05-03 06:41:11.271] [info] [webhooks.cpp:170] [1885] return total: {"id":48,"result":{}} +[2026-05-03 06:41:11.321] [info] [homing_override.cpp:238] [1885] need false false false homed true true true +[2026-05-03 06:41:11.321] [info] [device_status.cpp:832] [1885] M2202 result_code:2801 +[2026-05-03 06:41:11.323] [info] [homing_override.cpp:166] [1885] homing_ready axis z +[2026-05-03 06:41:12.223] [info] [homing_override.cpp:175] [1885] homing_ready #2: endstop name z state false +[2026-05-03 06:41:12.537] [info] [gcode.cpp:559] [1885] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 06:41:12.821] [info] [gcode.cpp:559] [1885] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 06:41:12.823] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:52.500 Y:264.000 Z:5.000 E:98.500 +[2026-05-03 06:41:12.824] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:41:12.868] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 649.75 +[2026-05-03 06:41:12.868] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 121.75 +[2026-05-03 06:41:12.868] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 5 +[2026-05-03 06:41:13.227] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:41:13.255] [warning] [tmc.cpp:887] [1885] Stepper stepper_x phase change (was 3 now -61) +[2026-05-03 06:41:13.271] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:12404247891 +[2026-05-03 06:41:13.271] [info] [homing.cpp:266] [1885] endstop_name x tt 516.8434544583333 trigger_time 516.8434544583333 move_end_print_time 517.097690833333 +[2026-05-03 06:41:13.271] [info] [homing.cpp:266] [1885] endstop_name x tt 516.8434544583333 trigger_time 516.8434544583333 move_end_print_time 517.097690833333 +[2026-05-03 06:41:13.271] [info] [homing.cpp:309] [1885] stepper_name stepper_x over_steps 0 halt_pos 5172 start_pos 5513 trig_pos 5172 +[2026-05-03 06:41:13.271] [info] [homing.cpp:309] [1885] stepper_name stepper_y over_steps 0 halt_pos -22704 start_pos -22363 trig_pos -22704 +[2026-05-03 06:41:13.303] [info] [gcode.cpp:544] [1885] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 06:41:13.304] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:41:13.912] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:264.000 Z:4.977 E:98.500 +[2026-05-03 06:41:13.913] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:264.000 Z:4.977 E:98.500 +[2026-05-03 06:41:13.913] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:41:13.944] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 414 +[2026-05-03 06:41:13.944] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -398 +[2026-05-03 06:41:13.944] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 5 +[2026-05-03 06:41:18.665] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:41:18.683] [warning] [tmc.cpp:887] [1885] Stepper stepper_x phase change (was -61 now 3) +[2026-05-03 06:41:18.686] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:12534777120 +[2026-05-03 06:41:18.687] [info] [homing.cpp:266] [1885] endstop_name y tt 522.2821723333333 trigger_time 522.2821723333333 move_end_print_time 522.5343850833333 +[2026-05-03 06:41:18.687] [info] [homing.cpp:266] [1885] endstop_name y tt 522.2821723333333 trigger_time 522.2821723333333 move_end_print_time 522.5343850833333 +[2026-05-03 06:41:18.687] [info] [homing.cpp:309] [1885] stepper_name stepper_y over_steps 0 halt_pos -553 start_pos -21901 trig_pos -553 +[2026-05-03 06:41:18.687] [info] [homing.cpp:309] [1885] stepper_name stepper_x over_steps 0 halt_pos -15373 start_pos 5975 trig_pos -15373 +[2026-05-03 06:41:18.688] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.019062786579673405 +[2026-05-03 06:41:18.718] [info] [gcode.cpp:544] [1885] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 06:41:18.718] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:41:19.326] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:8.000 Z:4.981 E:98.500 +[2026-05-03 06:41:19.327] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:8.000 Z:4.981 E:98.500 +[2026-05-03 06:41:19.328] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:41:19.360] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 393.75 +[2026-05-03 06:41:19.360] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 377.75 +[2026-05-03 06:41:19.360] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 5 +[2026-05-03 06:41:20.652] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:41:20.671] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:12582445443 +[2026-05-03 06:41:20.671] [info] [homing.cpp:266] [1885] endstop_name x tt 524.2683524583333 trigger_time 524.2683524583333 move_end_print_time 524.5200681666666 +[2026-05-03 06:41:20.672] [info] [homing.cpp:266] [1885] endstop_name x tt 524.2683524583333 trigger_time 524.2683524583333 move_end_print_time 524.5200681666666 +[2026-05-03 06:41:20.672] [info] [homing.cpp:309] [1885] stepper_name stepper_x over_steps 0 halt_pos -19403 start_pos -14570 trig_pos -19403 +[2026-05-03 06:41:20.672] [info] [homing.cpp:309] [1885] stepper_name stepper_y over_steps 0 halt_pos -6189 start_pos -1356 trig_pos -6189 +[2026-05-03 06:41:20.702] [info] [gcode.cpp:544] [1885] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 06:41:20.704] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:41:21.311] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:8.000 Z:4.981 E:98.500 +[2026-05-03 06:41:21.312] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:8.000 Z:4.981 E:98.500 +[2026-05-03 06:41:21.313] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:41:21.344] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 414 +[2026-05-03 06:41:21.344] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -398 +[2026-05-03 06:41:21.344] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 5 +[2026-05-03 06:41:21.799] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:41:21.818] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:12609972357 +[2026-05-03 06:41:21.819] [info] [homing.cpp:266] [1885] endstop_name y tt 525.4153071666667 trigger_time 525.4153071666667 move_end_print_time 525.6739477499996 +[2026-05-03 06:41:21.819] [info] [homing.cpp:266] [1885] endstop_name y tt 525.4153071666667 trigger_time 525.4153071666667 move_end_print_time 525.6739477499996 +[2026-05-03 06:41:21.819] [info] [homing.cpp:309] [1885] stepper_name stepper_y over_steps 0 halt_pos -4585 start_pos -5386 trig_pos -4585 +[2026-05-03 06:41:21.819] [info] [homing.cpp:309] [1885] stepper_name stepper_x over_steps 0 halt_pos -19401 start_pos -18600 trig_pos -19401 +[2026-05-03 06:41:21.850] [info] [gcode.cpp:544] [1885] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 06:41:21.851] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:41:21.853] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:8.000 Z:4.981 E:98.500 +[2026-05-03 06:41:22.433] [info] [gcode.cpp:559] [1885] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 06:41:22.717] [info] [gcode.cpp:559] [1885] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 06:41:22.718] [info] [homing_override.cpp:395] [1885] manual_move z start +[2026-05-03 06:41:22.719] [info] [homing_override.cpp:397] [1885] manual_move z over +[2026-05-03 06:41:22.719] [info] [homing_override.cpp:418] [1885] prev_G28 z start +[2026-05-03 06:41:22.757] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 316.5 +[2026-05-03 06:41:22.757] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -211.5 +[2026-05-03 06:41:22.757] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 387 +[2026-05-03 06:41:24.797] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:41:24.808] [warning] [tmc.cpp:887] [1885] Stepper stepper_z phase change (was 1 now 2) +[2026-05-03 06:41:24.810] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:12681938287 +[2026-05-03 06:41:24.811] [info] [homing.cpp:266] [1885] endstop_name z tt 528.4138452916667 trigger_time 528.4138452916667 move_end_print_time 528.6663341666666 +[2026-05-03 06:41:24.811] [info] [homing.cpp:309] [1885] stepper_name stepper_z over_steps 0 halt_pos -101387 start_pos -99384 trig_pos -101387 +[2026-05-03 06:41:24.811] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.016157720146618496 +[2026-05-03 06:41:24.813] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 316.5 +[2026-05-03 06:41:24.813] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -211.5 +[2026-05-03 06:41:24.813] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 4 +[2026-05-03 06:41:25.943] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:41:25.955] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:12709438709 +[2026-05-03 06:41:25.956] [info] [homing.cpp:266] [1885] endstop_name z tt 529.5594462083334 trigger_time 529.5594462083334 move_end_print_time 529.8113000833333 +[2026-05-03 06:41:25.956] [info] [homing.cpp:309] [1885] stepper_name stepper_z over_steps 0 halt_pos -101384 start_pos -100587 trig_pos -101384 +[2026-05-03 06:41:25.957] [info] [z_compensation.cpp:264] [1885] ZCompensation handle_home_rails_end +[2026-05-03 06:41:25.957] [info] [z_compensation.cpp:92] [1885] use_fix_ref_temperature true fix_ref_temperature 140 ref_temperature 160.14489926483168 +[2026-05-03 06:41:25.957] [info] [gcode.cpp:544] [1885] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 06:41:25.959] [info] [homing_override.cpp:420] [1885] prev_G28 z over +[2026-05-03 06:41:25.959] [info] [homing_override.cpp:422] [1885] manual_move z start +[2026-05-03 06:41:25.960] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.01571827009619086 +[2026-05-03 06:41:25.960] [info] [homing_override.cpp:434] [1885] manual_move z over +[2026-05-03 06:41:25.960] [info] [device_status.cpp:832] [1885] M2202 result_code:2802 +[2026-05-03 06:41:25.963] [info] [resonance_tester.cpp:458] [1885] cmd_SHAPER_CALIBRATE #1 status:{"axis":"-","command":"resonance_tester","freq":0,"result":"running"} +[2026-05-03 06:41:26.079] [info] [gcode.cpp:559] [1885] Probing point (128.000000, 128.000000, 5.000000) +[2026-05-03 06:41:30.122] [info] [gcode.cpp:559] [1885] Testing axis x +[2026-05-03 06:41:30.127] [info] [lis2dw.cpp:284] [1885] lis2dw_dev_id: 0x33 +[2026-05-03 06:41:30.127] [info] [gcode.cpp:544] [1885] respond_ecode: lis2dw_dev_id: 0x33, error_code: 401 error_level 3 +[2026-05-03 06:41:30.135] [info] [lis2dw.cpp:335] [1885] LIS2DW starting 'lis2dw' measurements +[2026-05-03 06:41:30.140] [info] [resonance_tester.cpp:746] [1885] run_test chip_name:lis2dw accel_chips.size:0 feedback.dump:{"axis":"x","command":"resonance_tester","freq":0.0,"result":"normal"} +[2026-05-03 06:41:30.143] [info] [gcode.cpp:559] [1885] Disabled [input_shaper] for resonance testing +[2026-05-03 06:41:30.144] [info] [gcode.cpp:559] [1885] Testing frequency 5.000000 Hz +[2026-05-03 06:41:30.150] [info] [gcode.cpp:559] [1885] Testing frequency 6.099354 Hz +[2026-05-03 06:41:30.155] [info] [gcode.cpp:559] [1885] Testing frequency 7.024603 Hz +[2026-05-03 06:41:30.162] [info] [gcode.cpp:559] [1885] Testing frequency 8.092455 Hz +[2026-05-03 06:41:30.168] [info] [gcode.cpp:559] [1885] Testing frequency 9.033192 Hz +[2026-05-03 06:41:30.175] [info] [gcode.cpp:559] [1885] Testing frequency 10.085104 Hz +[2026-05-03 06:41:30.183] [info] [gcode.cpp:559] [1885] Testing frequency 11.036297 Hz +[2026-05-03 06:41:30.190] [info] [gcode.cpp:559] [1885] Testing frequency 12.078512 Hz +[2026-05-03 06:41:30.198] [info] [gcode.cpp:559] [1885] Testing frequency 13.037142 Hz +[2026-05-03 06:41:32.939] [info] [gcode.cpp:559] [1885] Testing frequency 14.001379 Hz +[2026-05-03 06:41:33.441] [info] [gcode.cpp:559] [1885] Testing frequency 15.036959 Hz +[2026-05-03 06:41:33.974] [info] [gcode.cpp:559] [1885] Testing frequency 16.005395 Hz +[2026-05-03 06:41:34.488] [info] [gcode.cpp:559] [1885] Testing frequency 17.036291 Hz +[2026-05-03 06:41:35.000] [info] [gcode.cpp:559] [1885] Testing frequency 18.008075 Hz +[2026-05-03 06:41:35.510] [info] [gcode.cpp:559] [1885] Testing frequency 19.035397 Hz +[2026-05-03 06:41:36.018] [info] [gcode.cpp:559] [1885] Testing frequency 20.009906 Hz +[2026-05-03 06:41:36.528] [info] [gcode.cpp:559] [1885] Testing frequency 21.034408 Hz +[2026-05-03 06:41:37.035] [info] [gcode.cpp:559] [1885] Testing frequency 22.011174 Hz +[2026-05-03 06:41:37.533] [info] [gcode.cpp:559] [1885] Testing frequency 23.033393 Hz +[2026-05-03 06:41:38.038] [info] [gcode.cpp:559] [1885] Testing frequency 24.012056 Hz +[2026-05-03 06:41:38.555] [info] [gcode.cpp:559] [1885] Testing frequency 25.032389 Hz +[2026-05-03 06:41:39.059] [info] [gcode.cpp:559] [1885] Testing frequency 26.012669 Hz +[2026-05-03 06:41:39.566] [info] [gcode.cpp:559] [1885] Testing frequency 27.031415 Hz +[2026-05-03 06:41:40.060] [info] [gcode.cpp:559] [1885] Testing frequency 28.013088 Hz +[2026-05-03 06:41:40.567] [info] [gcode.cpp:559] [1885] Testing frequency 29.030480 Hz +[2026-05-03 06:41:41.079] [info] [gcode.cpp:559] [1885] Testing frequency 30.013365 Hz +[2026-05-03 06:41:41.583] [info] [gcode.cpp:559] [1885] Testing frequency 31.029589 Hz +[2026-05-03 06:41:42.086] [info] [gcode.cpp:559] [1885] Testing frequency 32.013538 Hz +[2026-05-03 06:41:42.581] [info] [gcode.cpp:559] [1885] Testing frequency 33.028743 Hz +[2026-05-03 06:41:43.093] [info] [gcode.cpp:559] [1885] Testing frequency 34.013634 Hz +[2026-05-03 06:41:43.596] [info] [gcode.cpp:559] [1885] Testing frequency 35.027941 Hz +[2026-05-03 06:41:44.098] [info] [gcode.cpp:559] [1885] Testing frequency 36.013670 Hz +[2026-05-03 06:41:44.602] [info] [gcode.cpp:559] [1885] Testing frequency 37.000155 Hz +[2026-05-03 06:41:45.097] [info] [gcode.cpp:559] [1885] Testing frequency 38.013662 Hz +[2026-05-03 06:41:45.605] [info] [gcode.cpp:559] [1885] Testing frequency 39.000822 Hz +[2026-05-03 06:41:46.101] [info] [gcode.cpp:559] [1885] Testing frequency 40.013620 Hz +[2026-05-03 06:41:46.610] [info] [gcode.cpp:559] [1885] Testing frequency 41.001393 Hz +[2026-05-03 06:41:47.106] [info] [gcode.cpp:559] [1885] Testing frequency 42.013552 Hz +[2026-05-03 06:41:47.616] [info] [gcode.cpp:559] [1885] Testing frequency 43.001882 Hz +[2026-05-03 06:41:48.115] [info] [gcode.cpp:559] [1885] Testing frequency 44.013465 Hz +[2026-05-03 06:41:48.613] [info] [gcode.cpp:559] [1885] Testing frequency 45.002304 Hz +[2026-05-03 06:41:49.118] [info] [gcode.cpp:559] [1885] Testing frequency 46.013363 Hz +[2026-05-03 06:41:49.621] [info] [gcode.cpp:559] [1885] Testing frequency 47.002668 Hz +[2026-05-03 06:41:50.117] [info] [gcode.cpp:559] [1885] Testing frequency 48.013249 Hz +[2026-05-03 06:41:50.619] [info] [gcode.cpp:559] [1885] Testing frequency 49.002985 Hz +[2026-05-03 06:41:51.124] [info] [gcode.cpp:559] [1885] Testing frequency 50.013127 Hz +[2026-05-03 06:41:51.628] [info] [gcode.cpp:559] [1885] Testing frequency 51.003260 Hz +[2026-05-03 06:41:52.127] [info] [gcode.cpp:559] [1885] Testing frequency 52.013000 Hz +[2026-05-03 06:41:52.631] [info] [gcode.cpp:559] [1885] Testing frequency 53.003500 Hz +[2026-05-03 06:41:53.132] [info] [gcode.cpp:559] [1885] Testing frequency 54.012868 Hz +[2026-05-03 06:41:53.632] [info] [gcode.cpp:559] [1885] Testing frequency 55.003709 Hz +[2026-05-03 06:41:54.133] [info] [gcode.cpp:559] [1885] Testing frequency 56.012733 Hz +[2026-05-03 06:41:54.155] [info] [clocksync.cpp:199] [1955] mcu 'mcu': New minimum RTT: sent_time=582.975834611,half_rtt=6.816650000018853e-05,freq=23999999.405769046 +[2026-05-03 06:41:54.635] [info] [gcode.cpp:559] [1885] Testing frequency 57.003893 Hz +[2026-05-03 06:41:55.136] [info] [gcode.cpp:559] [1885] Testing frequency 58.012596 Hz +[2026-05-03 06:41:55.637] [info] [gcode.cpp:559] [1885] Testing frequency 59.004053 Hz +[2026-05-03 06:41:56.139] [info] [gcode.cpp:559] [1885] Testing frequency 60.012459 Hz +[2026-05-03 06:41:56.640] [info] [gcode.cpp:559] [1885] Testing frequency 61.004193 Hz +[2026-05-03 06:41:57.141] [info] [gcode.cpp:559] [1885] Testing frequency 62.012321 Hz +[2026-05-03 06:41:57.642] [info] [gcode.cpp:559] [1885] Testing frequency 63.004316 Hz +[2026-05-03 06:41:58.144] [info] [gcode.cpp:559] [1885] Testing frequency 64.012184 Hz +[2026-05-03 06:41:58.644] [info] [gcode.cpp:559] [1885] Testing frequency 65.004424 Hz +[2026-05-03 06:41:59.142] [info] [gcode.cpp:559] [1885] Testing frequency 66.012048 Hz +[2026-05-03 06:41:59.645] [info] [gcode.cpp:559] [1885] Testing frequency 67.004518 Hz +[2026-05-03 06:42:00.148] [info] [gcode.cpp:559] [1885] Testing frequency 68.011913 Hz +[2026-05-03 06:42:00.647] [info] [gcode.cpp:559] [1885] Testing frequency 69.004600 Hz +[2026-05-03 06:42:01.152] [info] [gcode.cpp:559] [1885] Testing frequency 70.011780 Hz +[2026-05-03 06:42:01.653] [info] [gcode.cpp:559] [1885] Testing frequency 71.004672 Hz +[2026-05-03 06:42:02.157] [info] [gcode.cpp:559] [1885] Testing frequency 72.011648 Hz +[2026-05-03 06:42:02.653] [info] [gcode.cpp:559] [1885] Testing frequency 73.004734 Hz +[2026-05-03 06:42:03.152] [info] [gcode.cpp:559] [1885] Testing frequency 74.011519 Hz +[2026-05-03 06:42:03.652] [info] [gcode.cpp:559] [1885] Testing frequency 75.004788 Hz +[2026-05-03 06:42:04.154] [info] [gcode.cpp:559] [1885] Testing frequency 76.011391 Hz +[2026-05-03 06:42:04.653] [info] [gcode.cpp:559] [1885] Testing frequency 77.004835 Hz +[2026-05-03 06:42:05.156] [info] [gcode.cpp:559] [1885] Testing frequency 78.011265 Hz +[2026-05-03 06:42:05.654] [info] [gcode.cpp:559] [1885] Testing frequency 79.004875 Hz +[2026-05-03 06:42:06.154] [info] [gcode.cpp:559] [1885] Testing frequency 80.011142 Hz +[2026-05-03 06:42:06.656] [info] [gcode.cpp:559] [1885] Testing frequency 81.004909 Hz +[2026-05-03 06:42:07.158] [info] [gcode.cpp:559] [1885] Testing frequency 82.011021 Hz +[2026-05-03 06:42:07.658] [info] [gcode.cpp:559] [1885] Testing frequency 83.004937 Hz +[2026-05-03 06:42:08.156] [info] [gcode.cpp:559] [1885] Testing frequency 84.010902 Hz +[2026-05-03 06:42:08.661] [info] [gcode.cpp:559] [1885] Testing frequency 85.004961 Hz +[2026-05-03 06:42:09.160] [info] [gcode.cpp:559] [1885] Testing frequency 86.010785 Hz +[2026-05-03 06:42:09.664] [info] [gcode.cpp:559] [1885] Testing frequency 87.004981 Hz +[2026-05-03 06:42:10.161] [info] [gcode.cpp:559] [1885] Testing frequency 88.010671 Hz +[2026-05-03 06:42:10.664] [info] [gcode.cpp:559] [1885] Testing frequency 89.004996 Hz +[2026-05-03 06:42:11.165] [info] [gcode.cpp:559] [1885] Testing frequency 90.010558 Hz +[2026-05-03 06:42:11.172] [info] [gcode.cpp:559] [1885] Re-enabled [input_shaper] +[2026-05-03 06:42:13.550] [info] [lis2dw.cpp:354] [1885] LIS2DW finished 'lis2dw' measurements +[2026-05-03 06:42:14.651] [info] [gcode.cpp:559] [1885] Testing axis y +[2026-05-03 06:42:14.657] [info] [lis2dw.cpp:284] [1885] lis2dw_dev_id: 0x33 +[2026-05-03 06:42:14.658] [info] [gcode.cpp:544] [1885] respond_ecode: lis2dw_dev_id: 0x33, error_code: 401 error_level 3 +[2026-05-03 06:42:14.665] [info] [lis2dw.cpp:335] [1885] LIS2DW starting 'lis2dw' measurements +[2026-05-03 06:42:14.671] [info] [resonance_tester.cpp:746] [1885] run_test chip_name:lis2dw accel_chips.size:0 feedback.dump:{"axis":"y","command":"resonance_tester","freq":0.0,"result":"normal"} +[2026-05-03 06:42:14.673] [info] [gcode.cpp:559] [1885] Disabled [input_shaper] for resonance testing +[2026-05-03 06:42:14.674] [info] [gcode.cpp:559] [1885] Testing frequency 5.000000 Hz +[2026-05-03 06:42:14.681] [info] [gcode.cpp:559] [1885] Testing frequency 6.099354 Hz +[2026-05-03 06:42:14.686] [info] [gcode.cpp:559] [1885] Testing frequency 7.024603 Hz +[2026-05-03 06:42:14.692] [info] [gcode.cpp:559] [1885] Testing frequency 8.092455 Hz +[2026-05-03 06:42:14.698] [info] [gcode.cpp:559] [1885] Testing frequency 9.033192 Hz +[2026-05-03 06:42:14.706] [info] [gcode.cpp:559] [1885] Testing frequency 10.085104 Hz +[2026-05-03 06:42:14.712] [info] [gcode.cpp:559] [1885] Testing frequency 11.036297 Hz +[2026-05-03 06:42:14.721] [info] [gcode.cpp:559] [1885] Testing frequency 12.078512 Hz +[2026-05-03 06:42:14.729] [info] [gcode.cpp:559] [1885] Testing frequency 13.037142 Hz +[2026-05-03 06:42:17.475] [info] [gcode.cpp:559] [1885] Testing frequency 14.001379 Hz +[2026-05-03 06:42:17.979] [info] [gcode.cpp:559] [1885] Testing frequency 15.036959 Hz +[2026-05-03 06:42:18.503] [info] [gcode.cpp:559] [1885] Testing frequency 16.005395 Hz +[2026-05-03 06:42:19.015] [info] [gcode.cpp:559] [1885] Testing frequency 17.036291 Hz +[2026-05-03 06:42:19.528] [info] [gcode.cpp:559] [1885] Testing frequency 18.008075 Hz +[2026-05-03 06:42:20.039] [info] [gcode.cpp:559] [1885] Testing frequency 19.035397 Hz +[2026-05-03 06:42:20.548] [info] [gcode.cpp:559] [1885] Testing frequency 20.009906 Hz +[2026-05-03 06:42:21.057] [info] [gcode.cpp:559] [1885] Testing frequency 21.034408 Hz +[2026-05-03 06:42:21.566] [info] [gcode.cpp:559] [1885] Testing frequency 22.011174 Hz +[2026-05-03 06:42:22.059] [info] [gcode.cpp:559] [1885] Testing frequency 23.033393 Hz +[2026-05-03 06:42:22.566] [info] [gcode.cpp:559] [1885] Testing frequency 24.012056 Hz +[2026-05-03 06:42:23.085] [info] [gcode.cpp:559] [1885] Testing frequency 25.032389 Hz +[2026-05-03 06:42:23.590] [info] [gcode.cpp:559] [1885] Testing frequency 26.012669 Hz +[2026-05-03 06:42:24.095] [info] [gcode.cpp:559] [1885] Testing frequency 27.031415 Hz +[2026-05-03 06:42:24.590] [info] [gcode.cpp:559] [1885] Testing frequency 28.013088 Hz +[2026-05-03 06:42:25.096] [info] [gcode.cpp:559] [1885] Testing frequency 29.030480 Hz +[2026-05-03 06:42:25.607] [info] [gcode.cpp:559] [1885] Testing frequency 30.013365 Hz +[2026-05-03 06:42:26.110] [info] [gcode.cpp:559] [1885] Testing frequency 31.029589 Hz +[2026-05-03 06:42:26.614] [info] [gcode.cpp:559] [1885] Testing frequency 32.013538 Hz +[2026-05-03 06:42:27.111] [info] [gcode.cpp:559] [1885] Testing frequency 33.028743 Hz +[2026-05-03 06:42:27.621] [info] [gcode.cpp:559] [1885] Testing frequency 34.013634 Hz +[2026-05-03 06:42:28.124] [info] [gcode.cpp:559] [1885] Testing frequency 35.027941 Hz +[2026-05-03 06:42:28.625] [info] [gcode.cpp:559] [1885] Testing frequency 36.013670 Hz +[2026-05-03 06:42:29.129] [info] [gcode.cpp:559] [1885] Testing frequency 37.000155 Hz +[2026-05-03 06:42:29.626] [info] [gcode.cpp:559] [1885] Testing frequency 38.013662 Hz +[2026-05-03 06:42:30.135] [info] [gcode.cpp:559] [1885] Testing frequency 39.000822 Hz +[2026-05-03 06:42:30.629] [info] [gcode.cpp:559] [1885] Testing frequency 40.013620 Hz +[2026-05-03 06:42:31.138] [info] [gcode.cpp:559] [1885] Testing frequency 41.001393 Hz +[2026-05-03 06:42:31.637] [info] [gcode.cpp:559] [1885] Testing frequency 42.013552 Hz +[2026-05-03 06:42:32.142] [info] [gcode.cpp:559] [1885] Testing frequency 43.001882 Hz +[2026-05-03 06:42:32.646] [info] [gcode.cpp:559] [1885] Testing frequency 44.013465 Hz +[2026-05-03 06:42:33.144] [info] [gcode.cpp:559] [1885] Testing frequency 45.002304 Hz +[2026-05-03 06:42:33.647] [info] [gcode.cpp:559] [1885] Testing frequency 46.013363 Hz +[2026-05-03 06:42:34.149] [info] [gcode.cpp:559] [1885] Testing frequency 47.002668 Hz +[2026-05-03 06:42:34.647] [info] [gcode.cpp:559] [1885] Testing frequency 48.013249 Hz +[2026-05-03 06:42:35.148] [info] [gcode.cpp:559] [1885] Testing frequency 49.002985 Hz +[2026-05-03 06:42:35.654] [info] [gcode.cpp:559] [1885] Testing frequency 50.013127 Hz +[2026-05-03 06:42:36.156] [info] [gcode.cpp:559] [1885] Testing frequency 51.003260 Hz +[2026-05-03 06:42:36.657] [info] [gcode.cpp:559] [1885] Testing frequency 52.013000 Hz +[2026-05-03 06:42:37.157] [info] [gcode.cpp:559] [1885] Testing frequency 53.003500 Hz +[2026-05-03 06:42:37.661] [info] [gcode.cpp:559] [1885] Testing frequency 54.012868 Hz +[2026-05-03 06:42:38.160] [info] [heaters.cpp:405] [1955] __func__:temperature_callback,heater_name:heater_bed,read_time:601.77800000038,last_temp:34.05776733700492,temp:34.05776733700492,target_temp:0,smoothed_temp:34.06052562703006 +[2026-05-03 06:42:38.163] [info] [gcode.cpp:559] [1885] Testing frequency 55.003709 Hz +[2026-05-03 06:42:38.662] [info] [gcode.cpp:559] [1885] Testing frequency 56.012733 Hz +[2026-05-03 06:42:39.164] [info] [gcode.cpp:559] [1885] Testing frequency 57.003893 Hz +[2026-05-03 06:42:39.665] [info] [gcode.cpp:559] [1885] Testing frequency 58.012596 Hz +[2026-05-03 06:42:40.166] [info] [gcode.cpp:559] [1885] Testing frequency 59.004053 Hz +[2026-05-03 06:42:40.669] [info] [gcode.cpp:559] [1885] Testing frequency 60.012459 Hz +[2026-05-03 06:42:41.170] [info] [gcode.cpp:559] [1885] Testing frequency 61.004193 Hz +[2026-05-03 06:42:41.669] [info] [gcode.cpp:559] [1885] Testing frequency 62.012321 Hz +[2026-05-03 06:42:41.715] [info] [clocksync.cpp:212] [1955] mcu 'mcu': Ignoring clock sample: sent_time=630.534743092,time_avg=600.8956150127207,freq=24000004.167155746,diff=18547.2082195282(0.0007728003424803416),stddev=513.8661280123823 +[2026-05-03 06:42:42.172] [info] [gcode.cpp:559] [1885] Testing frequency 63.004316 Hz +[2026-05-03 06:42:42.672] [info] [gcode.cpp:559] [1885] Testing frequency 64.012184 Hz +[2026-05-03 06:42:42.808] [info] [heaters.cpp:405] [1963] __func__:temperature_callback,heater_name:extruder,read_time:606.4250972345629,last_temp:120.26679579464536,temp:120.26679579464536,target_temp:0,smoothed_temp:120.4721620104024 +[2026-05-03 06:42:43.176] [info] [gcode.cpp:559] [1885] Testing frequency 65.004424 Hz +[2026-05-03 06:42:43.672] [info] [gcode.cpp:559] [1885] Testing frequency 66.012048 Hz +[2026-05-03 06:42:44.173] [info] [gcode.cpp:559] [1885] Testing frequency 67.004518 Hz +[2026-05-03 06:42:44.677] [info] [gcode.cpp:559] [1885] Testing frequency 68.011913 Hz +[2026-05-03 06:42:45.178] [info] [gcode.cpp:559] [1885] Testing frequency 69.004600 Hz +[2026-05-03 06:42:45.679] [info] [gcode.cpp:559] [1885] Testing frequency 70.011780 Hz +[2026-05-03 06:42:46.179] [info] [gcode.cpp:559] [1885] Testing frequency 71.004672 Hz +[2026-05-03 06:42:46.680] [info] [gcode.cpp:559] [1885] Testing frequency 72.011648 Hz +[2026-05-03 06:42:47.180] [info] [gcode.cpp:559] [1885] Testing frequency 73.004734 Hz +[2026-05-03 06:42:47.682] [info] [gcode.cpp:559] [1885] Testing frequency 74.011519 Hz +[2026-05-03 06:42:48.181] [info] [gcode.cpp:559] [1885] Testing frequency 75.004788 Hz +[2026-05-03 06:42:48.682] [info] [gcode.cpp:559] [1885] Testing frequency 76.011391 Hz +[2026-05-03 06:42:49.186] [info] [gcode.cpp:559] [1885] Testing frequency 77.004835 Hz +[2026-05-03 06:42:49.685] [info] [gcode.cpp:559] [1885] Testing frequency 78.011265 Hz +[2026-05-03 06:42:50.181] [info] [gcode.cpp:559] [1885] Testing frequency 79.004875 Hz +[2026-05-03 06:42:50.684] [info] [gcode.cpp:559] [1885] Testing frequency 80.011142 Hz +[2026-05-03 06:42:51.186] [info] [gcode.cpp:559] [1885] Testing frequency 81.004909 Hz +[2026-05-03 06:42:51.690] [info] [gcode.cpp:559] [1885] Testing frequency 82.011021 Hz +[2026-05-03 06:42:52.188] [info] [gcode.cpp:559] [1885] Testing frequency 83.004937 Hz +[2026-05-03 06:42:52.688] [info] [gcode.cpp:559] [1885] Testing frequency 84.010902 Hz +[2026-05-03 06:42:53.191] [info] [gcode.cpp:559] [1885] Testing frequency 85.004961 Hz +[2026-05-03 06:42:53.694] [info] [gcode.cpp:559] [1885] Testing frequency 86.010785 Hz +[2026-05-03 06:42:54.198] [info] [gcode.cpp:559] [1885] Testing frequency 87.004981 Hz +[2026-05-03 06:42:54.695] [info] [gcode.cpp:559] [1885] Testing frequency 88.010671 Hz +[2026-05-03 06:42:55.189] [info] [gcode.cpp:559] [1885] Testing frequency 89.004996 Hz +[2026-05-03 06:42:55.689] [info] [gcode.cpp:559] [1885] Testing frequency 90.010558 Hz +[2026-05-03 06:42:55.695] [info] [gcode.cpp:559] [1885] Re-enabled [input_shaper] +[2026-05-03 06:42:58.050] [info] [lis2dw.cpp:354] [1885] LIS2DW finished 'lis2dw' measurements +[2026-05-03 06:42:59.072] [info] [gcode.cpp:559] [1885] Calculating the best input shaper parameters for x axis +[2026-05-03 06:43:02.310] [info] [shaper_calibrate.cpp:761] [1885] Fitted shaper: zv frequency = 52.00000000000024 Hz (vibrations = 0.49109075163622%, smoothing ~= 0.07656094445826954) +[2026-05-03 06:43:02.311] [info] [shaper_calibrate.cpp:763] [1885] To avoid too much smoothing with 'zv', suggested max_accel <= 9700 mm/sec^2 +[2026-05-03 06:43:05.731] [info] [shaper_calibrate.cpp:761] [1885] Fitted shaper: mzv frequency = 53.800000000000274 Hz (vibrations = 0%, smoothing ~= 0.08048317629195545) +[2026-05-03 06:43:05.732] [info] [shaper_calibrate.cpp:763] [1885] To avoid too much smoothing with 'mzv', suggested max_accel <= 8500 mm/sec^2 +[2026-05-03 06:43:08.953] [info] [shaper_calibrate.cpp:761] [1885] Fitted shaper: ei frequency = 64.40000000000045 Hz (vibrations = 0%, smoothing ~= 0.08621506285460558) +[2026-05-03 06:43:08.954] [info] [shaper_calibrate.cpp:763] [1885] To avoid too much smoothing with 'ei', suggested max_accel <= 7700 mm/sec^2 +[2026-05-03 06:43:12.175] [info] [shaper_calibrate.cpp:761] [1885] Fitted shaper: 2hump_ei frequency = 80.20000000000059 Hz (vibrations = 0%, smoothing ~= 0.09577088202156145) +[2026-05-03 06:43:12.175] [info] [shaper_calibrate.cpp:763] [1885] To avoid too much smoothing with '2hump_ei', suggested max_accel <= 6900 mm/sec^2 +[2026-05-03 06:43:16.117] [info] [shaper_calibrate.cpp:761] [1885] Fitted shaper: 3hump_ei frequency = 95.80000000000068 Hz (vibrations = 0%, smoothing ~= 0.10133469880450324) +[2026-05-03 06:43:16.117] [info] [shaper_calibrate.cpp:763] [1885] To avoid too much smoothing with '3hump_ei', suggested max_accel <= 6400 mm/sec^2 +[2026-05-03 06:43:16.117] [info] [gcode.cpp:559] [1885] Recommended shaper_type_x = zv, shaper_freq_x = 52.000000 Hz +[2026-05-03 06:43:16.142] [info] [gcode.cpp:559] [1885] damping_ratio_x:0.100 shaper_freq_x:52.000000 shaper_type_x:zv +[2026-05-03 06:43:16.144] [info] [gcode.cpp:559] [1885] damping_ratio_y:0.100 shaper_freq_y:44.800000 shaper_type_y:mzv +[2026-05-03 06:43:16.175] [info] [configfile.cpp:659] [1885] save_config: set [input_shaper] shaper_type_x zv +[2026-05-03 06:43:16.176] [info] [configfile.cpp:659] [1885] save_config: set [input_shaper] shaper_freq_x 52.000000 +[2026-05-03 06:43:16.184] [info] [configfile.cpp:723] [1885] CFG /opt/usr/cfg/autosave.cfg BACKUP /opt/usr/cfg/autosave_backup.cfg TEMP /opt/usr/cfg/autosave_temp.cfg +[2026-05-03 06:43:16.185] [info] [gcode.cpp:559] [1885] Calculating the best input shaper parameters for y axis +[2026-05-03 06:43:19.104] [info] [shaper_calibrate.cpp:761] [1885] Fitted shaper: zv frequency = 45.80000000000015 Hz (vibrations = 0.704307304905207%, smoothing ~= 0.09408191929308134) +[2026-05-03 06:43:19.104] [info] [shaper_calibrate.cpp:763] [1885] To avoid too much smoothing with 'zv', suggested max_accel <= 7200 mm/sec^2 +[2026-05-03 06:43:22.544] [info] [shaper_calibrate.cpp:761] [1885] Fitted shaper: mzv frequency = 47.20000000000018 Hz (vibrations = 0%, smoothing ~= 0.10009067350071797) +[2026-05-03 06:43:22.544] [info] [shaper_calibrate.cpp:763] [1885] To avoid too much smoothing with 'mzv', suggested max_accel <= 6500 mm/sec^2 +[2026-05-03 06:43:25.766] [info] [shaper_calibrate.cpp:761] [1885] Fitted shaper: ei frequency = 56.600000000000335 Hz (vibrations = 0%, smoothing ~= 0.10705010970486054) +[2026-05-03 06:43:25.766] [info] [shaper_calibrate.cpp:763] [1885] To avoid too much smoothing with 'ei', suggested max_accel <= 5900 mm/sec^2 +[2026-05-03 06:43:29.590] [info] [shaper_calibrate.cpp:761] [1885] Fitted shaper: 2hump_ei frequency = 70.20000000000044 Hz (vibrations = 0%, smoothing ~= 0.11999918587385466) +[2026-05-03 06:43:29.590] [info] [shaper_calibrate.cpp:763] [1885] To avoid too much smoothing with '2hump_ei', suggested max_accel <= 5000 mm/sec^2 +[2026-05-03 06:43:33.116] [info] [shaper_calibrate.cpp:761] [1885] Fitted shaper: 3hump_ei frequency = 83.80000000000051 Hz (vibrations = 0%, smoothing ~= 0.12712686678404944) +[2026-05-03 06:43:33.116] [info] [shaper_calibrate.cpp:763] [1885] To avoid too much smoothing with '3hump_ei', suggested max_accel <= 4600 mm/sec^2 +[2026-05-03 06:43:33.117] [info] [gcode.cpp:559] [1885] Recommended shaper_type_y = zv, shaper_freq_y = 45.800000 Hz +[2026-05-03 06:43:33.137] [info] [gcode.cpp:559] [1885] damping_ratio_x:0.100 shaper_freq_x:52.000000 shaper_type_x:zv +[2026-05-03 06:43:33.138] [info] [gcode.cpp:559] [1885] damping_ratio_y:0.100 shaper_freq_y:45.800000 shaper_type_y:zv +[2026-05-03 06:43:33.139] [info] [configfile.cpp:659] [1885] save_config: set [input_shaper] shaper_type_y zv +[2026-05-03 06:43:33.139] [info] [configfile.cpp:659] [1885] save_config: set [input_shaper] shaper_freq_y 45.800000 +[2026-05-03 06:43:33.148] [info] [configfile.cpp:723] [1885] CFG /opt/usr/cfg/autosave.cfg BACKUP /opt/usr/cfg/autosave_backup.cfg TEMP /opt/usr/cfg/autosave_temp.cfg +[2026-05-03 06:43:33.151] [info] [resonance_tester.cpp:543] [1885] cmd_SHAPER_CALIBRATE #1 status:{"axis":"-","command":"resonance_tester","freq":0,"result":"completed"} +[2026-05-03 06:43:33.151] [info] [gcode.cpp:559] [1885] The SAVE_CONFIG command will update the printer config file +with these parameters and restart the printer. +[2026-05-03 06:43:33.152] [info] [shaper_calibrate.cpp:131] [1885] ~ShaperCalibrate() +[2026-05-03 06:43:33.153] [info] [webhooks.cpp:170] [1885] return total: {"id":49,"result":{}} +[2026-05-03 06:43:35.080] [info] [homing_override.cpp:238] [1885] need true true false homed true true true +[2026-05-03 06:43:35.082] [info] [gcode_move.cpp:52] [1885] G180 select 800 +[2026-05-03 06:43:35.083] [info] [gcode.cpp:957] [1885] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=100.8810765798184 +[2026-05-03 06:43:35.083] [info] [gcode.cpp:1053] [1885] cmd_SET_CONDITION is_ingore = true +[2026-05-03 06:43:35.085] [info] [gcode.cpp:1074] [1885] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 06:43:35.086] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm -0.029191349712480344 +[2026-05-03 06:43:36.247] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:220,wait:true +[2026-05-03 06:43:36.898] [info] [verify_heater.cpp:164] [1885] Heater extruder approaching new target of 220 +[2026-05-03 06:44:06.913] [info] [verify_heater.cpp:140] [1885] Heater extruder within range of 220 +[2026-05-03 06:44:28.925] [info] [verify_heater.cpp:164] [1885] Heater extruder approaching new target of 220 +[2026-05-03 06:44:31.926] [info] [verify_heater.cpp:140] [1885] Heater extruder within range of 220 +[2026-05-03 06:44:38.660] [info] [heaters.cpp:405] [1955] __func__:temperature_callback,heater_name:heater_bed,read_time:722.27800000038,last_temp:33.148096893415584,temp:33.148096893415584,target_temp:0,smoothed_temp:33.154586685593266 +[2026-05-03 06:44:42.809] [info] [heaters.cpp:405] [1963] __func__:temperature_callback,heater_name:extruder,read_time:726.4264570924973,last_temp:215.4836724612337,temp:215.4836724612337,target_temp:215,smoothed_temp:216.1199471547786 +[2026-05-03 06:44:43.933] [info] [verify_heater.cpp:164] [1885] Heater extruder approaching new target of 220 +[2026-05-03 06:44:45.934] [info] [verify_heater.cpp:140] [1885] Heater extruder within range of 220 +[2026-05-03 06:44:59.943] [info] [verify_heater.cpp:164] [1885] Heater extruder approaching new target of 220 +[2026-05-03 06:45:02.945] [info] [verify_heater.cpp:140] [1885] Heater extruder within range of 220 +[2026-05-03 06:45:15.952] [info] [verify_heater.cpp:164] [1885] Heater extruder approaching new target of 220 +[2026-05-03 06:45:17.953] [info] [verify_heater.cpp:140] [1885] Heater extruder within range of 220 +[2026-05-03 06:45:19.311] [info] [device_status.cpp:832] [1885] M2202 result_code:1066 +[2026-05-03 06:45:19.312] [info] [heaters.cpp:1198] [1885] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 215 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 06:45:19.312] [info] [gcode.cpp:559] [1885] PID parameters: pid_Kp=28.3705 pid_Ki=3.78269 pid_Kd=53.1952 +The SAVE_CONFIG command will update the printer config file +with these parameters and restart the printer. +[2026-05-03 06:45:19.313] [info] [configfile.cpp:659] [1885] save_config: set [extruder] control pid +[2026-05-03 06:45:19.313] [info] [configfile.cpp:659] [1885] save_config: set [extruder] pid_Kp 28.370465 +[2026-05-03 06:45:19.313] [info] [configfile.cpp:659] [1885] save_config: set [extruder] pid_Ki 3.782686 +[2026-05-03 06:45:19.314] [info] [configfile.cpp:659] [1885] save_config: set [extruder] pid_Kd 53.195225 +[2026-05-03 06:45:19.315] [info] [webhooks.cpp:170] [1885] return total: {"id":50,"result":{}} +[2026-05-03 06:45:20.472] [info] [bed_mesh.cpp:1001] [1885] cmd_BED_MESH_CALIBRATE: from_slicer 0 execute_calirate_from_slicer 0 adaptive_ignore_state 0 +[2026-05-03 06:45:20.472] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.060328514723488595 +[2026-05-03 06:45:20.473] [info] [print_stats.cpp:277] [1885] bed_mesh_exist:0x0000 +[2026-05-03 06:45:20.473] [info] [bed_mesh.cpp:839] [1885] update_config #0 +[2026-05-03 06:45:20.473] [info] [bed_mesh.cpp:844] [1885] update_config #1 +[2026-05-03 06:45:20.473] [info] [bed_mesh.cpp:857] [1885] update_config #2 +[2026-05-03 06:45:20.473] [info] [bed_mesh.cpp:889] [1885] update_config #4 +[2026-05-03 06:45:20.473] [info] [bed_mesh.cpp:925] [1885] update_config #5 +[2026-05-03 06:45:20.473] [info] [bed_mesh.cpp:934] [1885] update_config #6 +[2026-05-03 06:45:20.473] [info] [bed_mesh.cpp:943] [1885] update_config #7 +[2026-05-03 06:45:20.473] [info] [bed_mesh.cpp:947] [1885] update_config #8 +[2026-05-03 06:45:20.473] [info] [bed_mesh.cpp:958] [1885] update_config #10 +[2026-05-03 06:45:20.475] [info] [bed_mesh.cpp:961] [1885] update_config #11 +[2026-05-03 06:45:20.475] [info] [load_cell_probe.cpp:721] [1885] bed_mesh:calibrate event +[2026-05-03 06:45:20.476] [info] [device_status.cpp:832] [1885] M2202 result_code:2901 +[2026-05-03 06:45:20.478] [info] [heater_bed.cpp:57] [1885] cmd_M140 temp 60 wait false +[2026-05-03 06:45:20.478] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 06:45:20.478] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 06:45:20.478] [info] [gcode.cpp:544] [1885] respond_ecode: Heater heater_bed not heating at expected rate, error_code: 101 error_level 3 +[2026-05-03 06:45:20.479] [info] [heaters.cpp:312] [1885] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 06:45:20.480] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:60,wait:false +[2026-05-03 06:45:20.480] [info] [gcode_move.cpp:52] [1885] G180 select 5 +[2026-05-03 06:45:20.481] [info] [homing_override.cpp:238] [1885] need false false false homed true true true +[2026-05-03 06:45:20.482] [info] [device_status.cpp:832] [1885] M2202 result_code:2801 +[2026-05-03 06:45:20.483] [info] [homing_override.cpp:166] [1885] homing_ready axis z +[2026-05-03 06:45:20.736] [info] [homing_override.cpp:175] [1885] homing_ready #2: endstop name z state false +[2026-05-03 06:45:20.955] [info] [verify_heater.cpp:164] [1885] Heater heater_bed approaching new target of 60 +[2026-05-03 06:45:21.022] [info] [gcode.cpp:559] [1885] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 06:45:21.309] [info] [gcode.cpp:559] [1885] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 06:45:21.311] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:52.500 Y:264.000 Z:4.984 E:98.500 +[2026-05-03 06:45:21.312] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:45:21.343] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 649.75 +[2026-05-03 06:45:21.343] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 121.75 +[2026-05-03 06:45:21.344] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 4.955090380191329 +[2026-05-03 06:45:21.703] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:45:21.714] [warning] [tmc.cpp:887] [1885] Stepper stepper_x phase change (was 3 now -61) +[2026-05-03 06:45:21.723] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:18367701086 +[2026-05-03 06:45:21.724] [info] [homing.cpp:266] [1885] endstop_name x tt 765.3206709166667 trigger_time 765.3206709166667 move_end_print_time 765.5736249166663 +[2026-05-03 06:45:21.724] [info] [homing.cpp:266] [1885] endstop_name x tt 765.3206709166667 trigger_time 765.3206709166667 move_end_print_time 765.5736249166663 +[2026-05-03 06:45:21.724] [info] [homing.cpp:309] [1885] stepper_name stepper_x over_steps 0 halt_pos 5172 start_pos 5519 trig_pos 5172 +[2026-05-03 06:45:21.724] [info] [homing.cpp:309] [1885] stepper_name stepper_y over_steps 0 halt_pos -22709 start_pos -22362 trig_pos -22709 +[2026-05-03 06:45:21.755] [info] [gcode.cpp:544] [1885] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 06:45:21.756] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:45:22.361] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:264.000 Z:4.895 E:98.500 +[2026-05-03 06:45:22.363] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:264.000 Z:4.895 E:98.500 +[2026-05-03 06:45:22.363] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:45:22.400] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 414 +[2026-05-03 06:45:22.400] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -398 +[2026-05-03 06:45:22.400] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 4.955090380191329 +[2026-05-03 06:45:27.106] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:45:27.124] [warning] [tmc.cpp:887] [1885] Stepper stepper_x phase change (was -61 now 3) +[2026-05-03 06:45:27.126] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:18497357539 +[2026-05-03 06:45:27.127] [info] [homing.cpp:266] [1885] endstop_name y tt 770.723023125 trigger_time 770.723023125 move_end_print_time 770.9805636249957 +[2026-05-03 06:45:27.127] [info] [homing.cpp:266] [1885] endstop_name y tt 770.723023125 trigger_time 770.723023125 move_end_print_time 770.9805636249957 +[2026-05-03 06:45:27.127] [info] [homing.cpp:309] [1885] stepper_name stepper_y over_steps 0 halt_pos -634 start_pos -21906 trig_pos -634 +[2026-05-03 06:45:27.127] [info] [homing.cpp:309] [1885] stepper_name stepper_x over_steps 0 halt_pos -15297 start_pos 5975 trig_pos -15297 +[2026-05-03 06:45:27.128] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.05752920106182736 +[2026-05-03 06:45:27.159] [info] [gcode.cpp:544] [1885] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 06:45:27.161] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:45:27.767] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:8.000 Z:4.898 E:98.500 +[2026-05-03 06:45:27.768] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:8.000 Y:8.000 Z:4.898 E:98.500 +[2026-05-03 06:45:27.769] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:45:27.812] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 393.75 +[2026-05-03 06:45:27.812] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 377.75 +[2026-05-03 06:45:27.812] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 4.955090380191329 +[2026-05-03 06:45:29.123] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:45:29.146] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:18545775329 +[2026-05-03 06:45:29.146] [info] [homing.cpp:266] [1885] endstop_name x tt 772.7404310416666 trigger_time 772.7404310416666 move_end_print_time 772.9926923333334 +[2026-05-03 06:45:29.146] [info] [homing.cpp:266] [1885] endstop_name x tt 772.7404310416666 trigger_time 772.7404310416666 move_end_print_time 772.9926923333334 +[2026-05-03 06:45:29.147] [info] [homing.cpp:309] [1885] stepper_name stepper_x over_steps -1 halt_pos -19420 start_pos -14494 trig_pos -19419 +[2026-05-03 06:45:29.147] [info] [homing.cpp:309] [1885] stepper_name stepper_y over_steps -1 halt_pos -6363 start_pos -1437 trig_pos -6362 +[2026-05-03 06:45:29.177] [info] [gcode.cpp:544] [1885] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 06:45:29.178] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:45:29.786] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:7.988 Y:8.000 Z:4.898 E:98.500 +[2026-05-03 06:45:29.787] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:7.988 Y:8.000 Z:4.898 E:98.500 +[2026-05-03 06:45:29.788] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:45:29.789] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.05477865774296069 +[2026-05-03 06:45:29.827] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 413.98754 +[2026-05-03 06:45:29.828] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -398.01246 +[2026-05-03 06:45:29.828] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 4.955090380191329 +[2026-05-03 06:45:30.282] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:45:30.313] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:18573588819 +[2026-05-03 06:45:30.314] [info] [homing.cpp:266] [1885] endstop_name y tt 773.8993264583333 trigger_time 773.8993264583333 move_end_print_time 774.1586262916662 +[2026-05-03 06:45:30.314] [info] [homing.cpp:266] [1885] endstop_name y tt 773.8993264583333 trigger_time 773.8993264583333 move_end_print_time 774.1586262916662 +[2026-05-03 06:45:30.314] [info] [homing.cpp:309] [1885] stepper_name stepper_y over_steps 0 halt_pos -4762 start_pos -5560 trig_pos -4762 +[2026-05-03 06:45:30.314] [info] [homing.cpp:309] [1885] stepper_name stepper_x over_steps 0 halt_pos -19415 start_pos -18617 trig_pos -19415 +[2026-05-03 06:45:30.346] [info] [gcode.cpp:544] [1885] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 06:45:30.347] [info] [stepper.cpp:573] [1885] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 06:45:30.348] [info] [gcode_move.cpp:629] [1885] cmd_M114 X:7.988 Y:8.000 Z:4.900 E:98.500 +[2026-05-03 06:45:30.918] [info] [gcode.cpp:559] [1885] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 06:45:31.214] [info] [gcode.cpp:559] [1885] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 06:45:31.216] [info] [homing_override.cpp:395] [1885] manual_move z start +[2026-05-03 06:45:31.216] [info] [homing_override.cpp:397] [1885] manual_move z over +[2026-05-03 06:45:31.216] [info] [homing_override.cpp:418] [1885] prev_G28 z start +[2026-05-03 06:45:31.248] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 316.5 +[2026-05-03 06:45:31.248] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -211.5 +[2026-05-03 06:45:31.248] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 387 +[2026-05-03 06:45:33.262] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:45:33.274] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:18645107284 +[2026-05-03 06:45:33.276] [info] [homing.cpp:266] [1885] endstop_name z tt 776.8792201666666 trigger_time 776.8792201666666 move_end_print_time 777.1313484166667 +[2026-05-03 06:45:33.277] [info] [homing.cpp:309] [1885] stepper_name stepper_z over_steps 0 halt_pos -101387 start_pos -99402 trig_pos -101387 +[2026-05-03 06:45:33.277] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.05170909525762264 +[2026-05-03 06:45:33.279] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 316.5 +[2026-05-03 06:45:33.279] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -211.5 +[2026-05-03 06:45:33.279] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 4 +[2026-05-03 06:45:34.408] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:45:34.423] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:18672609493 +[2026-05-03 06:45:34.424] [info] [homing.cpp:266] [1885] endstop_name z tt 778.0248955416666 trigger_time 778.0248955416666 move_end_print_time 778.2773647083334 +[2026-05-03 06:45:34.424] [info] [homing.cpp:309] [1885] stepper_name stepper_z over_steps 0 halt_pos -101385 start_pos -100587 trig_pos -101385 +[2026-05-03 06:45:34.425] [info] [z_compensation.cpp:264] [1885] ZCompensation handle_home_rails_end +[2026-05-03 06:45:34.425] [info] [z_compensation.cpp:92] [1885] use_fix_ref_temperature true fix_ref_temperature 140 ref_temperature 210.97966416133417 +[2026-05-03 06:45:34.425] [info] [gcode.cpp:544] [1885] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 06:45:34.426] [info] [homing_override.cpp:420] [1885] prev_G28 z over +[2026-05-03 06:45:34.426] [info] [homing_override.cpp:422] [1885] manual_move z start +[2026-05-03 06:45:34.426] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.05065966660877414 +[2026-05-03 06:45:34.426] [info] [homing_override.cpp:434] [1885] manual_move z over +[2026-05-03 06:45:34.427] [info] [device_status.cpp:832] [1885] M2202 result_code:2802 +[2026-05-03 06:45:34.428] [info] [gcode.cpp:801] [1885] cmd_M2202 res.dump:{"command":"M2202","result":"2901"} +[2026-05-03 06:45:34.429] [info] [device_status.cpp:832] [1885] M2202 result_code:2901 +[2026-05-03 06:45:34.430] [info] [gcode_move.cpp:52] [1885] G180 select 1 +[2026-05-03 06:45:34.431] [info] [homing_override.cpp:238] [1885] need true true false homed true true true +[2026-05-03 06:45:34.432] [info] [device_status.cpp:832] [1885] M2202 result_code:1045 +[2026-05-03 06:45:34.433] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:45:34.433] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:45:34.433] [info] [gcode.cpp:544] [1885] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 06:45:34.434] [info] [heaters.cpp:312] [1885] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 06:45:34.434] [info] [extruder.cpp:501] [1885] cmd_M104 temp 200 index -1 wait true +[2026-05-03 06:45:34.434] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:200,wait:true +[2026-05-03 06:45:45.443] [info] [device_status.cpp:832] [1885] M2202 result_code:1066 +[2026-05-03 06:45:45.445] [info] [heaters.cpp:1198] [1885] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 200 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 06:45:45.446] [info] [device_status.cpp:832] [1885] M2202 result_code:1045 +[2026-05-03 06:45:45.448] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:45:45.448] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:45:45.448] [info] [gcode.cpp:544] [1885] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 06:45:45.449] [info] [heaters.cpp:312] [1885] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 06:45:45.449] [info] [extruder.cpp:501] [1885] cmd_M104 temp 180 index -1 wait true +[2026-05-03 06:45:45.450] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:180,wait:true +[2026-05-03 06:46:07.465] [info] [device_status.cpp:832] [1885] M2202 result_code:1066 +[2026-05-03 06:46:07.467] [info] [heaters.cpp:1198] [1885] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 180 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 06:46:07.467] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:46:07.467] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:46:07.467] [info] [gcode.cpp:544] [1885] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 06:46:07.468] [info] [heaters.cpp:312] [1885] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 06:46:07.468] [info] [extruder.cpp:501] [1885] cmd_M104 temp 140 index -1 wait false +[2026-05-03 06:46:07.468] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:140,wait:false +[2026-05-03 06:46:07.469] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.031041340271354766 +[2026-05-03 06:46:07.472] [info] [gcode_move.cpp:52] [1885] G180 select 2 +[2026-05-03 06:46:07.473] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:46:07.473] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:46:07.473] [info] [gcode.cpp:544] [1885] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 06:46:07.474] [info] [heaters.cpp:312] [1885] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 06:46:07.474] [info] [extruder.cpp:501] [1885] cmd_M104 temp 140 index -1 wait false +[2026-05-03 06:46:07.474] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:140,wait:false +[2026-05-03 06:46:07.475] [info] [print_stats.cpp:277] [1885] bed_mesh_exist:0x0000 +[2026-05-03 06:46:07.479] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:46:07.480] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:46:07.513] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:07.561] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:07.563] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:07.626] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:07.688] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:07.752] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:07.813] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:07.876] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:07.937] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.000] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.062] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.124] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.187] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.249] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.311] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.374] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.436] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.498] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.561] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.623] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.686] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.749] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.810] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.872] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.936] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:08.997] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:09.060] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:09.122] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:09.185] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:09.247] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:09.310] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:09.372] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:09.436] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:09.496] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:09.559] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:09.622] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:09.684] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:09.745] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:09.808] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:09.871] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:09.933] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:46:09.964] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: command_cs123x_write oid 7 config 124 +[2026-05-03 06:46:09.968] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: command_cs123x_read oid 7 config 124 +[2026-05-03 06:46:09.969] [info] [hx71x.cpp:246] [1885] sensor_type:cs1237 name:load_cell_probe rconfig:124 wconfig:124 retry:10 +[2026-05-03 06:46:12.006] [info] [load_cell_probe.cpp:866] [1885] pause_and_tare avg 21945.375 std 5265.209999890671 retry 0 +[2026-05-03 06:46:12.519] [info] [load_cell_probe.cpp:866] [1885] pause_and_tare avg 23030.416666666668 std 294.458957553707 retry 1 +[2026-05-03 06:46:12.519] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 382.99902000017494 +[2026-05-03 06:46:12.520] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -126.99628000016091 +[2026-05-03 06:46:12.520] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 7.0299999999996725 +[2026-05-03 06:46:15.559] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:46:15.559] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:46:15.561] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:46:15.576] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3642303291 trigger_emit_ticks=3642678291 +[2026-05-03 06:46:15.578] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3642303291 98131583803 trigger_emit_ticks 3642678291 98131958803 +[2026-05-03 06:46:15.579] [info] [homing.cpp:266] [1885] endstop_name probe tt 819.176451558037 trigger_time 819.176451558037 move_end_print_time 819.4287100416667 +[2026-05-03 06:46:15.579] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -5508 trig_steps -5506 start_pos -98573 trig_pos -104079 halt_pos -104081 +[2026-05-03 06:46:15.580] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.026505012950156094 +[2026-05-03 06:46:16.564] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 128.001370000007 254.99765000016794 -6.5202811385793344 spos -6.520000000000351 probing_z -6.735000000000328 +[2026-05-03 06:46:16.564] [info] [gcode.cpp:559] [1885] probe at 128.001,254.998 is z=-6.520281 +[2026-05-03 06:46:16.565] [info] [load_cell_probe.cpp:333] [1885] run_probe time 6.631532085999993 +[2026-05-03 06:46:16.566] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 382.99902000017494 +[2026-05-03 06:46:16.566] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -126.99628000016094 +[2026-05-03 06:46:16.566] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position -5.740000000000526 +[2026-05-03 06:46:17.058] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:46:17.060] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:46:17.074] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3822174395 trigger_emit_ticks=3822558771 +[2026-05-03 06:46:17.076] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3822174395 98311454907 trigger_emit_ticks 3822558771 98311839283 +[2026-05-03 06:46:17.077] [info] [homing.cpp:266] [1885] endstop_name probe tt 820.6754716330568 trigger_time 820.6754716330568 move_end_print_time 820.9277301666667 +[2026-05-03 06:46:17.077] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -405 trig_steps -403 start_pos -103681 trig_pos -104084 halt_pos -104086 +[2026-05-03 06:46:18.007] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 128.001370000007 254.99765000016794 -6.524857663136967 spos -6.525000000000517 probing_z -6.747500000000526 +[2026-05-03 06:46:18.007] [info] [gcode.cpp:559] [1885] probe at 128.001,254.998 is z=-6.524858 +[2026-05-03 06:46:18.008] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.442943624999998 +[2026-05-03 06:46:18.009] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 382.99902000017494 +[2026-05-03 06:46:18.010] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -126.99628000016094 +[2026-05-03 06:46:18.010] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position -5.752500000000725 +[2026-05-03 06:46:18.499] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:46:18.499] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:46:18.513] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3995063363 trigger_emit_ticks=3995447739 +[2026-05-03 06:46:18.515] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3995063363 98484343875 trigger_emit_ticks 3995447739 98484728251 +[2026-05-03 06:46:18.517] [info] [homing.cpp:266] [1885] endstop_name probe tt 822.1162295002493 trigger_time 822.1162295002493 move_end_print_time 822.368362125 +[2026-05-03 06:46:18.517] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -397 trig_steps -396 start_pos -103686 trig_pos -104082 halt_pos -104083 +[2026-05-03 06:46:18.518] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.023744090281469468 +[2026-05-03 06:46:19.346] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 128.001370000007 254.99765000016794 -6.525069726353042 spos -6.525000000000745 probing_z -6.742500000000725 +[2026-05-03 06:46:19.347] [info] [gcode.cpp:559] [1885] probe at 128.001,254.998 is z=-6.525070 +[2026-05-03 06:46:19.348] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3394835430000285 +[2026-05-03 06:46:19.349] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 382.99902000017494 +[2026-05-03 06:46:19.349] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -126.99628000016094 +[2026-05-03 06:46:19.349] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position -5.745000000000924 +[2026-05-03 06:46:19.851] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:46:19.852] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:46:19.879] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4157296948 trigger_emit_ticks=4157681301 +[2026-05-03 06:46:19.892] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4157296948 trigger_emit_ticks=4157681301 +[2026-05-03 06:46:19.894] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4157296948 98646577460 trigger_emit_ticks 4157681301 98646961813 +[2026-05-03 06:46:19.895] [info] [homing.cpp:266] [1885] endstop_name probe tt 823.4681908603907 trigger_time 823.4681908603907 move_end_print_time 823.7331020416667 +[2026-05-03 06:46:19.895] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -403 trig_steps -402 start_pos -103683 trig_pos -104085 halt_pos -104086 +[2026-05-03 06:46:20.835] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 128.001370000007 254.99765000016794 -6.527117727505125 spos -6.527500000000913 probing_z -6.750000000000924 +[2026-05-03 06:46:20.835] [info] [gcode.cpp:559] [1885] probe at 128.001,254.998 is z=-6.527118 +[2026-05-03 06:46:20.836] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4882524180000019 +[2026-05-03 06:46:20.837] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 128.001370000007 254.99765000016794 -6.524331563893617 +[2026-05-03 06:46:20.837] [info] [gcode.cpp:559] [1885] Result is z=-6.524332 +[2026-05-03 06:46:20.841] [info] [force_move.cpp:232] [1885] SET_KINEMATIC_POSITION pos=128.001370000007, 254.99765000016794, 0 clear= +[2026-05-03 06:46:22.834] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.020381600940116658 +[2026-05-03 06:46:29.393] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.015604567411385106 +[2026-05-03 06:46:32.363] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.012860578974656004 +[2026-05-03 06:46:35.484] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm 0.010100150634537773 +[2026-05-03 06:46:39.160] [info] [heaters.cpp:405] [1955] __func__:temperature_callback,heater_name:heater_bed,read_time:842.77800000038,last_temp:50.80714132121966,temp:50.80714132121966,target_temp:60,smoothed_temp:50.72908081959467 +[2026-05-03 06:46:39.342] [info] [device_status.cpp:832] [1885] M2202 result_code:1045 +[2026-05-03 06:46:39.344] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:46:39.344] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:46:39.344] [info] [gcode.cpp:544] [1885] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 06:46:39.344] [info] [heaters.cpp:312] [1885] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 06:46:39.345] [info] [extruder.cpp:501] [1885] cmd_M104 temp 140 index -1 wait true +[2026-05-03 06:46:39.345] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:140,wait:true +[2026-05-03 06:46:42.810] [info] [heaters.cpp:405] [1963] __func__:temperature_callback,heater_name:extruder,read_time:846.4278536105842,last_temp:145.8823437199029,temp:145.8823437199029,target_temp:140,smoothed_temp:146.4225813880703 +[2026-05-03 06:46:50.352] [info] [device_status.cpp:832] [1885] M2202 result_code:1066 +[2026-05-03 06:46:50.353] [info] [heaters.cpp:1198] [1885] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 06:46:50.355] [info] [z_compensation.cpp:285] [1885] ZCompensation z_adjust_mm -5.911483668113657e-05 +[2026-05-03 06:46:51.475] [info] [homing_override.cpp:238] [1885] need false false true homed true true true +[2026-05-03 06:46:51.475] [info] [device_status.cpp:832] [1885] M2202 result_code:2801 +[2026-05-03 06:46:51.477] [info] [homing_override.cpp:263] [1885] cmd_G28 cur_temp:139.8742325528412,safe_home_temp:140 +[2026-05-03 06:46:51.478] [info] [device_status.cpp:832] [1885] M2202 result_code:1045 +[2026-05-03 06:46:51.479] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:46:51.479] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:46:51.479] [info] [gcode.cpp:544] [1885] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 06:46:51.480] [info] [heaters.cpp:312] [1885] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 06:46:51.480] [info] [extruder.cpp:501] [1885] cmd_M104 temp 140 index -1 wait true +[2026-05-03 06:46:51.480] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:140,wait:true +[2026-05-03 06:46:51.481] [info] [device_status.cpp:832] [1885] M2202 result_code:1066 +[2026-05-03 06:46:51.482] [info] [heaters.cpp:1198] [1885] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 06:46:51.482] [info] [homing_override.cpp:166] [1885] homing_ready axis z +[2026-05-03 06:46:52.726] [info] [homing_override.cpp:175] [1885] homing_ready #2: endstop name z state false +[2026-05-03 06:46:52.726] [info] [homing_override.cpp:395] [1885] manual_move z start +[2026-05-03 06:46:52.727] [info] [homing_override.cpp:397] [1885] manual_move z over +[2026-05-03 06:46:52.727] [info] [homing_override.cpp:418] [1885] prev_G28 z start +[2026-05-03 06:46:52.742] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 316.5 +[2026-05-03 06:46:52.742] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -211.5 +[2026-05-03 06:46:52.742] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 387 +[2026-05-03 06:46:54.118] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:46:54.128] [warning] [tmc.cpp:887] [1885] Stepper stepper_z phase change (was 2 now 4) +[2026-05-03 06:46:54.132] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:20585648762 +[2026-05-03 06:46:54.133] [info] [homing.cpp:266] [1885] endstop_name z tt 857.7351150833333 trigger_time 857.7351150833333 move_end_print_time 857.987345125 +[2026-05-03 06:46:54.133] [info] [homing.cpp:309] [1885] stepper_name stepper_z over_steps 0 halt_pos -101386 start_pos -99995 trig_pos -101386 +[2026-05-03 06:46:54.135] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 316.5 +[2026-05-03 06:46:54.135] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -211.5 +[2026-05-03 06:46:54.135] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 4 +[2026-05-03 06:46:55.263] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:46:55.275] [info] [mcu.cpp:634] [1885] home_wait pin_value:1 next_clock:20613145339 +[2026-05-03 06:46:55.276] [info] [homing.cpp:266] [1885] endstop_name z tt 858.8805557916667 trigger_time 858.8805557916667 move_end_print_time 859.1323722083333 +[2026-05-03 06:46:55.277] [info] [homing.cpp:309] [1885] stepper_name stepper_z over_steps 0 halt_pos -101383 start_pos -100586 trig_pos -101383 +[2026-05-03 06:46:55.277] [info] [z_compensation.cpp:264] [1885] ZCompensation handle_home_rails_end +[2026-05-03 06:46:55.278] [info] [z_compensation.cpp:92] [1885] use_fix_ref_temperature true fix_ref_temperature 140 ref_temperature 139.25307022673246 +[2026-05-03 06:46:55.278] [info] [gcode.cpp:544] [1885] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 06:46:55.279] [info] [homing_override.cpp:420] [1885] prev_G28 z over +[2026-05-03 06:46:55.279] [info] [homing_override.cpp:422] [1885] manual_move z start +[2026-05-03 06:46:55.279] [info] [homing_override.cpp:434] [1885] manual_move z over +[2026-05-03 06:46:55.279] [info] [device_status.cpp:832] [1885] M2202 result_code:2802 +[2026-05-03 06:46:55.281] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:46:55.282] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.285] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.286] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.288] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.289] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.291] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.293] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.295] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.296] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.299] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.301] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.303] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.304] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.306] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.307] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.309] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.311] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.312] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.366] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.428] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.490] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.553] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.615] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.678] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.740] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.803] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.865] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.927] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:55.990] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:56.052] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:56.114] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:56.176] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:56.239] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:56.301] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:56.363] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:56.426] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:56.489] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:56.552] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:56.613] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:56.675] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:46:58.749] [info] [device_status.cpp:832] [1885] M2202 result_code:1045 +[2026-05-03 06:46:58.750] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:46:58.750] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:46:58.750] [info] [gcode.cpp:544] [1885] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 06:46:58.751] [info] [heaters.cpp:312] [1885] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 06:46:58.751] [info] [extruder.cpp:501] [1885] cmd_M104 temp 140 index -1 wait true +[2026-05-03 06:46:58.751] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:140,wait:true +[2026-05-03 06:46:59.010] [info] [verify_heater.cpp:140] [1885] Heater heater_bed within range of 60 +[2026-05-03 06:46:59.752] [info] [device_status.cpp:832] [1885] M2202 result_code:1066 +[2026-05-03 06:46:59.754] [info] [heaters.cpp:1198] [1885] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 06:46:59.756] [info] [device_status.cpp:832] [1885] M2202 result_code:1405 +[2026-05-03 06:46:59.756] [info] [heater_bed.cpp:57] [1885] cmd_M140 temp 60 wait true +[2026-05-03 06:46:59.757] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 06:46:59.757] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 06:46:59.757] [info] [gcode.cpp:544] [1885] respond_ecode: Heater heater_bed not heating at expected rate, error_code: 101 error_level 3 +[2026-05-03 06:46:59.757] [info] [heaters.cpp:312] [1885] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 06:46:59.758] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:60,wait:true +[2026-05-03 06:46:59.758] [info] [device_status.cpp:832] [1885] M2202 result_code:1066 +[2026-05-03 06:46:59.759] [info] [heaters.cpp:1198] [1885] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 60 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 06:46:59.759] [info] [probe.cpp:897] [1885] ENDSTOP CALIBRATE! +[2026-05-03 06:46:59.761] [info] [device_status.cpp:832] [1885] M2202 result_code:1045 +[2026-05-03 06:46:59.762] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:46:59.763] [info] [verify_heater.cpp:67] [1885] verify_heater:reset_fault heater_name extruder +[2026-05-03 06:46:59.763] [info] [gcode.cpp:544] [1885] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 06:46:59.763] [info] [heaters.cpp:312] [1885] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 06:46:59.763] [info] [extruder.cpp:501] [1885] cmd_M104 temp 140 index -1 wait true +[2026-05-03 06:46:59.764] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:140,wait:true +[2026-05-03 06:46:59.764] [info] [device_status.cpp:832] [1885] M2202 result_code:1066 +[2026-05-03 06:46:59.765] [info] [heaters.cpp:1198] [1885] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 06:47:01.416] [info] [load_cell_probe.cpp:866] [1885] pause_and_tare avg 23007.3 std 510.4933482629228 retry 0 +[2026-05-03 06:47:01.417] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 255.99423999984086 +[2026-05-03 06:47:01.417] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130472984 +[2026-05-03 06:47:01.417] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 5.000000000000077 +[2026-05-03 06:47:04.065] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:04.066] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:04.082] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=872968283 trigger_emit_ticks=873352657 +[2026-05-03 06:47:04.084] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 872968283 103952183387 trigger_emit_ticks 873352657 103952567761 +[2026-05-03 06:47:04.085] [info] [homing.cpp:266] [1885] endstop_name probe tt 867.6820674311126 trigger_time 867.6820674311126 move_end_print_time 867.9348513333333 +[2026-05-03 06:47:04.085] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -4695 trig_steps -4694 start_pos -99383 trig_pos -104077 halt_pos -104078 +[2026-05-03 06:47:05.032] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 127.9951399998552 127.99909999998566 -6.56638128328928 spos -6.56749999999991 probing_z -6.734999999999922 +[2026-05-03 06:47:05.033] [info] [gcode.cpp:559] [1885] probe at 127.995,127.999 is z=-6.566381 +[2026-05-03 06:47:05.034] [info] [load_cell_probe.cpp:333] [1885] run_probe time 5.265110711000034 +[2026-05-03 06:47:05.035] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 255.99423999984083 +[2026-05-03 06:47:05.035] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130462049 +[2026-05-03 06:47:05.035] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position -5.737500000000122 +[2026-05-03 06:47:05.042] [error] [tmc_uart.cpp:319] [1885] _decode_read error #1 +[2026-05-03 06:47:05.527] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:05.528] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:05.542] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1048406309 trigger_emit_ticks=1048790685 +[2026-05-03 06:47:05.545] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1048406309 104127621413 trigger_emit_ticks 1048790685 104128005789 +[2026-05-03 06:47:05.547] [info] [homing.cpp:266] [1885] endstop_name probe tt 869.1440664129941 trigger_time 869.1440664129941 move_end_print_time 869.3969942083334 +[2026-05-03 06:47:05.547] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -403 trig_steps -402 start_pos -103678 trig_pos -104080 halt_pos -104081 +[2026-05-03 06:47:06.477] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 127.99513999985518 127.99909999998565 -6.569783991242543 spos -6.570000000000164 probing_z -6.742500000000122 +[2026-05-03 06:47:06.477] [info] [gcode.cpp:559] [1885] probe at 127.995,127.999 is z=-6.569784 +[2026-05-03 06:47:06.479] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.444645917999992 +[2026-05-03 06:47:06.480] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 255.99423999984083 +[2026-05-03 06:47:06.480] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130447838 +[2026-05-03 06:47:06.480] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position -5.745000000000322 +[2026-05-03 06:47:06.972] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:06.973] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:06.988] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1221737148 trigger_emit_ticks=1222121449 +[2026-05-03 06:47:06.991] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1221737148 104300952252 trigger_emit_ticks 1222121449 104301336553 +[2026-05-03 06:47:06.992] [info] [homing.cpp:266] [1885] endstop_name probe tt 870.5885041762573 trigger_time 870.5885041762573 move_end_print_time 870.8411654166666 +[2026-05-03 06:47:06.992] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -404 trig_steps -402 start_pos -103681 trig_pos -104083 halt_pos -104085 +[2026-05-03 06:47:07.820] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 127.99513999985518 127.99909999998565 -6.572799953614457 spos -6.57250000000036 probing_z -6.7500000000003215 +[2026-05-03 06:47:07.821] [info] [gcode.cpp:559] [1885] probe at 127.995,127.999 is z=-6.572800 +[2026-05-03 06:47:07.822] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3432600429999866 +[2026-05-03 06:47:07.823] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 255.99423999984083 +[2026-05-03 06:47:07.823] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130447838 +[2026-05-03 06:47:07.823] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position -5.75500000000052 +[2026-05-03 06:47:08.312] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:08.326] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1382975201 +[2026-05-03 06:47:08.328] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 103079215104 trigger_emit_ticks 1382975201 104462190305 +[2026-05-03 06:47:08.329] [info] [homing.cpp:266] [1885] endstop_name probe tt 871.9289666697811 trigger_time 871.9289666697811 move_end_print_time 872.1815452916667 +[2026-05-03 06:47:08.329] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -398 start_pos -103685 trig_pos -104083 halt_pos -104085 +[2026-05-03 06:47:09.213] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 127.99513999985518 127.99909999998565 -6.5729238949648945 spos -6.572500000000559 probing_z -6.7500000000005205 +[2026-05-03 06:47:09.214] [info] [gcode.cpp:559] [1885] probe at 127.995,127.999 is z=-6.572924 +[2026-05-03 06:47:09.215] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3926539179999509 +[2026-05-03 06:47:09.216] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 255.99423999984083 +[2026-05-03 06:47:09.216] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130447838 +[2026-05-03 06:47:09.216] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position -5.755000000000719 +[2026-05-03 06:47:09.705] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:09.706] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:09.721] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1550164785 +[2026-05-03 06:47:09.723] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 103079215104 trigger_emit_ticks 1550164785 104629379889 +[2026-05-03 06:47:09.724] [info] [homing.cpp:266] [1885] endstop_name probe tt 873.3222291518724 trigger_time 873.3222291518724 move_end_print_time 873.5766145416667 +[2026-05-03 06:47:09.724] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -398 trig_steps -397 start_pos -103685 trig_pos -104082 halt_pos -104083 +[2026-05-03 06:47:10.562] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 127.99513999985518 127.99909999998565 -6.571018748933926 spos -6.570000000000761 probing_z -6.747500000000719 +[2026-05-03 06:47:10.563] [info] [gcode.cpp:559] [1885] probe at 127.995,127.999 is z=-6.571019 +[2026-05-03 06:47:10.563] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3485600419999173 +[2026-05-03 06:47:10.564] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 127.99513999985518 127.99909999998565 -6.570581574409021 +[2026-05-03 06:47:10.564] [info] [gcode.cpp:559] [1885] Result is z=-6.570582 +[2026-05-03 06:47:10.565] [info] [configfile.cpp:659] [1885] save_config: set [stepper_z] position_endstop 6.570582 +[2026-05-03 06:47:10.574] [info] [configfile.cpp:723] [1885] CFG /opt/usr/cfg/autosave.cfg BACKUP /opt/usr/cfg/autosave_backup.cfg TEMP /opt/usr/cfg/autosave_temp.cfg +[2026-05-03 06:47:10.575] [info] [probe.cpp:171] [1885] old_position_endstop 0 trigpos -6.570581574409021 dist 6.570581574409021 +[2026-05-03 06:47:10.575] [info] [probe.cpp:177] [1885] fix position: curpos -5.750000000000719 fixpos 0.8205815744083012 +[2026-05-03 06:47:10.576] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:47:10.577] [info] [probe.cpp:857] [1885] _move_next 0 probe_points.size 121 + +[2026-05-03 06:47:10.595] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 12.002520000057732 +[2026-05-03 06:47:10.595] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130447837 +[2026-05-03 06:47:10.595] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744084323 +[2026-05-03 06:47:12.082] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:12.083] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:12.098] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1835094485 trigger_emit_ticks=1835478859 +[2026-05-03 06:47:12.100] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1835094485 104914309589 trigger_emit_ticks 1835478859 104914693963 +[2026-05-03 06:47:12.101] [info] [homing.cpp:266] [1885] endstop_name probe tt 875.6998705342113 trigger_time 875.6998705342113 move_end_print_time 875.9515342916667 +[2026-05-03 06:47:12.101] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1210 trig_steps -1209 start_pos -102811 trig_pos -104020 halt_pos -104021 +[2026-05-03 06:47:12.985] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999963642 6.00324000009409 0.12042256551949174 spos 0.12058157440839068 probing_z -0.021918425591567647 +[2026-05-03 06:47:12.986] [info] [gcode.cpp:559] [1885] probe at 5.999,6.003 is z=0.120423 +[2026-05-03 06:47:12.987] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.4083979179999915 +[2026-05-03 06:47:12.988] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 12.002520000057732 +[2026-05-03 06:47:12.988] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130447838 +[2026-05-03 06:47:12.988] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9755815744084172 +[2026-05-03 06:47:13.479] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:13.480] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:13.499] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2002757343 trigger_emit_ticks=2003141719 +[2026-05-03 06:47:13.501] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2002757343 105081972447 trigger_emit_ticks 2003141719 105082356823 +[2026-05-03 06:47:13.502] [info] [homing.cpp:266] [1885] endstop_name probe tt 877.0970746076772 trigger_time 877.0970746076772 move_end_print_time 877.3487080416667 +[2026-05-03 06:47:13.502] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -406 start_pos -103621 trig_pos -104027 halt_pos -104028 +[2026-05-03 06:47:14.432] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999963642 6.00324000009409 0.11905673574160716 spos 0.11808157440839295 probing_z -0.03941842559158293 +[2026-05-03 06:47:14.433] [info] [gcode.cpp:559] [1885] probe at 5.999,6.003 is z=0.119057 +[2026-05-03 06:47:14.434] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.447025458999974 +[2026-05-03 06:47:14.435] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 12.002520000057732 +[2026-05-03 06:47:14.435] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130447838 +[2026-05-03 06:47:14.435] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9580815744084022 +[2026-05-03 06:47:14.936] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:14.941] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:14.965] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2177413359 trigger_emit_ticks=2177797733 +[2026-05-03 06:47:14.978] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2177413359 trigger_emit_ticks=2177797733 +[2026-05-03 06:47:14.980] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2177413359 105256628463 trigger_emit_ticks 2177797733 105257012837 +[2026-05-03 06:47:14.981] [info] [homing.cpp:266] [1885] endstop_name probe tt 878.5525573238972 trigger_time 878.5525573238972 move_end_print_time 878.819591375 +[2026-05-03 06:47:14.982] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -402 trig_steps -399 start_pos -103628 trig_pos -104027 halt_pos -104030 +[2026-05-03 06:47:15.922] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999963642 6.00324000009409 0.11833242300149785 spos 0.11808157440839295 probing_z -0.039418425591597805 +[2026-05-03 06:47:15.922] [info] [gcode.cpp:559] [1885] probe at 5.999,6.003 is z=0.118332 +[2026-05-03 06:47:15.923] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4887001669999336 +[2026-05-03 06:47:15.923] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 5.999279999963643 6.003240000094091 0.11927057475419893 +[2026-05-03 06:47:15.923] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:47:15.924] [info] [probe.cpp:857] [1885] _move_next 1 probe_points.size 121 + +[2026-05-03 06:47:15.933] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 36.00048000005586 +[2026-05-03 06:47:15.933] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.99399999986854 +[2026-05-03 06:47:15.933] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744085216 +[2026-05-03 06:47:17.109] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:17.110] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:17.123] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2438248105 trigger_emit_ticks=2438632479 +[2026-05-03 06:47:17.124] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2438248105 105517463209 trigger_emit_ticks 2438632479 105517847583 +[2026-05-03 06:47:17.126] [info] [homing.cpp:266] [1885] endstop_name probe tt 880.7262025034123 trigger_time 880.7262025034123 move_end_print_time 880.9778964583334 +[2026-05-03 06:47:17.126] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1176 trig_steps -1175 start_pos -102811 trig_pos -103986 halt_pos -103987 +[2026-05-03 06:47:17.906] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999962197 6.00324000009366 0.2017761590825389 spos 0.2005815744085453 probing_z 0.06308157440852158 +[2026-05-03 06:47:17.906] [info] [gcode.cpp:559] [1885] probe at 29.997,6.003 is z=0.201776 +[2026-05-03 06:47:17.907] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9821894599999723 +[2026-05-03 06:47:17.908] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 36.00048000005586 +[2026-05-03 06:47:17.908] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868535 +[2026-05-03 06:47:17.908] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.0605815744085045 +[2026-05-03 06:47:18.400] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:18.414] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2593134229 trigger_emit_ticks=2593519651 +[2026-05-03 06:47:18.416] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2593134229 105672349333 trigger_emit_ticks 2593519651 105672734755 +[2026-05-03 06:47:18.417] [info] [homing.cpp:266] [1885] endstop_name probe tt 882.0169420742766 trigger_time 882.0169420742766 move_end_print_time 882.26988925 +[2026-05-03 06:47:18.418] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -403 start_pos -103587 trig_pos -103990 halt_pos -103993 +[2026-05-03 06:47:19.346] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999962197 6.003240000093662 0.20034271812728324 spos 0.2005815744085453 probing_z 0.05308157440850447 +[2026-05-03 06:47:19.347] [info] [gcode.cpp:559] [1885] probe at 29.997,6.003 is z=0.200343 +[2026-05-03 06:47:19.347] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4403530430000728 +[2026-05-03 06:47:19.349] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 36.00048000005586 +[2026-05-03 06:47:19.349] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868535 +[2026-05-03 06:47:19.349] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.0455815744084878 +[2026-05-03 06:47:19.837] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:19.837] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:19.857] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2765685389 trigger_emit_ticks=2766069763 +[2026-05-03 06:47:19.859] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2765685389 105844900493 trigger_emit_ticks 2766069763 105845284867 +[2026-05-03 06:47:19.860] [info] [homing.cpp:266] [1885] endstop_name probe tt 883.4548749780753 trigger_time 883.4548749780753 move_end_print_time 883.7072397083333 +[2026-05-03 06:47:19.860] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -103593 trig_pos -103992 halt_pos -103993 +[2026-05-03 06:47:20.790] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999962197 6.003240000093662 0.2003245580253217 spos 0.2005815744085453 probing_z 0.048081574408487704 +[2026-05-03 06:47:20.791] [info] [gcode.cpp:559] [1885] probe at 29.997,6.003 is z=0.200325 +[2026-05-03 06:47:20.792] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4440036249999366 +[2026-05-03 06:47:20.792] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 29.997239999962193 6.003240000093662 0.20081447841171463 +[2026-05-03 06:47:20.792] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:47:20.793] [info] [probe.cpp:857] [1885] _move_next 2 probe_points.size 121 + +[2026-05-03 06:47:20.801] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 59.99844000006425 +[2026-05-03 06:47:20.801] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.00441999987236 +[2026-05-03 06:47:20.801] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744086073 +[2026-05-03 06:47:21.964] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:21.979] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3020758571 trigger_emit_ticks=3021142945 +[2026-05-03 06:47:21.981] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3020758571 106099973675 trigger_emit_ticks 3021142945 106100358049 +[2026-05-03 06:47:21.982] [info] [homing.cpp:266] [1885] endstop_name probe tt 885.5805091309079 trigger_time 885.5805091309079 move_end_print_time 885.8335879583333 +[2026-05-03 06:47:21.982] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1159 trig_steps -1155 start_pos -102811 trig_pos -103966 halt_pos -103970 +[2026-05-03 06:47:22.765] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.00142999996831 5.997010000095944 0.2538027151147668 spos 0.2530815744086681 probing_z 0.11308157440860711 +[2026-05-03 06:47:22.765] [info] [gcode.cpp:559] [1885] probe at 54.001,5.997 is z=0.253803 +[2026-05-03 06:47:22.766] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.972395166999945 +[2026-05-03 06:47:22.767] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 59.99844000006425 +[2026-05-03 06:47:22.767] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.00441999987237 +[2026-05-03 06:47:22.767] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.1030815744085893 +[2026-05-03 06:47:23.259] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:23.274] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3176510149 +[2026-05-03 06:47:23.276] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 107374182400 trigger_emit_ticks 3176510149 106255725253 +[2026-05-03 06:47:23.278] [info] [homing.cpp:266] [1885] endstop_name probe tt 886.8752510607328 trigger_time 886.8752510607328 move_end_print_time 887.1290712083334 +[2026-05-03 06:47:23.278] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -403 start_pos -103570 trig_pos -103973 halt_pos -103977 +[2026-05-03 06:47:24.207] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.00142999996831 5.9970100000959405 0.25025329552768727 spos 0.25058157440855666 probing_z 0.09558157440858928 +[2026-05-03 06:47:24.207] [info] [gcode.cpp:559] [1885] probe at 54.001,5.997 is z=0.250253 +[2026-05-03 06:47:24.208] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4419745000000148 +[2026-05-03 06:47:24.209] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 59.99844000006425 +[2026-05-03 06:47:24.209] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.00441999987237 +[2026-05-03 06:47:24.210] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.0855815744085717 +[2026-05-03 06:47:24.695] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:24.696] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:24.711] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3348666963 trigger_emit_ticks=3349051339 +[2026-05-03 06:47:24.712] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3348666963 106427882067 trigger_emit_ticks 3349051339 106428266443 +[2026-05-03 06:47:24.713] [info] [homing.cpp:266] [1885] endstop_name probe tt 888.313110782196 trigger_time 888.313110782196 move_end_print_time 888.565003125 +[2026-05-03 06:47:24.713] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -396 trig_steps -395 start_pos -103577 trig_pos -103972 halt_pos -103973 +[2026-05-03 06:47:25.544] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.00142999996831 5.9970100000959405 0.2506082643565801 spos 0.25058157440855666 probing_z 0.09808157440857168 +[2026-05-03 06:47:25.545] [info] [gcode.cpp:559] [1885] probe at 54.001,5.997 is z=0.250608 +[2026-05-03 06:47:25.546] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3377475839999988 +[2026-05-03 06:47:25.546] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 54.00142999996831 5.997010000095941 0.2515547583330114 +[2026-05-03 06:47:25.547] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:47:25.548] [info] [probe.cpp:857] [1885] _move_next 3 probe_points.size 121 + +[2026-05-03 06:47:25.556] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 83.99640000007264 +[2026-05-03 06:47:25.557] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988076 +[2026-05-03 06:47:25.557] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574408691 +[2026-05-03 06:47:26.710] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:26.710] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:26.724] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3590397591 trigger_emit_ticks=3590781965 +[2026-05-03 06:47:26.726] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3590397591 106669612695 trigger_emit_ticks 3590781965 106669997069 +[2026-05-03 06:47:26.728] [info] [homing.cpp:266] [1885] endstop_name probe tt 890.3275557634661 trigger_time 890.3275557634661 move_end_print_time 890.5824487135288 +[2026-05-03 06:47:26.729] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1147 trig_steps -1145 start_pos -102811 trig_pos -103956 halt_pos -103958 +[2026-05-03 06:47:27.510] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.9993899999767 5.9970100000959405 0.2794281244680885 spos 0.28058157440864306 probing_z 0.13808157440869095 +[2026-05-03 06:47:27.510] [info] [gcode.cpp:559] [1885] probe at 77.999,5.997 is z=0.279428 +[2026-05-03 06:47:27.511] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9629872919999798 +[2026-05-03 06:47:27.512] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 83.99640000007264 +[2026-05-03 06:47:27.512] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988076 +[2026-05-03 06:47:27.512] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.1330815744086724 +[2026-05-03 06:47:28.006] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:28.007] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:28.022] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3746337769 +[2026-05-03 06:47:28.024] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 107374182400 trigger_emit_ticks 3746337769 106825552873 +[2026-05-03 06:47:28.026] [info] [homing.cpp:266] [1885] endstop_name probe tt 891.6238700760462 trigger_time 891.6238700760462 move_end_print_time 891.8763509166666 +[2026-05-03 06:47:28.026] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -409 trig_steps -408 start_pos -103558 trig_pos -103966 halt_pos -103967 +[2026-05-03 06:47:28.956] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.9993899999767 5.9970100000959405 0.2776426600980333 spos 0.2780815744087022 probing_z 0.11308157440867239 +[2026-05-03 06:47:28.956] [info] [gcode.cpp:559] [1885] probe at 77.999,5.997 is z=0.277643 +[2026-05-03 06:47:28.957] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4461315839999997 +[2026-05-03 06:47:28.959] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 83.99640000007264 +[2026-05-03 06:47:28.959] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988076 +[2026-05-03 06:47:28.959] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.1105815744086542 +[2026-05-03 06:47:29.460] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:29.460] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:29.465] [info] [clocksync.cpp:212] [1955] mcu 'mcu': Ignoring clock sample: sent_time=918.281923771,time_avg=888.7486362494645,freq=23999999.536399983,diff=104582.31296157837(0.004357596373399099),stddev=618.3166778458685 +[2026-05-03 06:47:29.494] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3920788885 +[2026-05-03 06:47:29.496] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 107374182400 trigger_emit_ticks 3920788885 107000003989 +[2026-05-03 06:47:29.498] [info] [homing.cpp:266] [1885] endstop_name probe tt 893.0776497726532 trigger_time 893.0776497726532 move_end_print_time 893.3459733333333 +[2026-05-03 06:47:29.498] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -103567 trig_pos -103966 halt_pos -103967 +[2026-05-03 06:47:30.429] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.9993899999767 5.9970100000959405 0.27675097253829994 spos 0.2755815744086476 probing_z 0.11308157440865418 +[2026-05-03 06:47:30.429] [info] [gcode.cpp:559] [1885] probe at 77.999,5.997 is z=0.276751 +[2026-05-03 06:47:30.430] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4722251250000227 +[2026-05-03 06:47:30.430] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 77.9993899999767 5.9970100000959405 0.2779405857014739 +[2026-05-03 06:47:30.431] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:47:30.431] [info] [probe.cpp:857] [1885] _move_next 4 probe_points.size 121 + +[2026-05-03 06:47:30.433] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:47:30.434] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:47:30.435] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.444] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.446] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.448] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.450] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.451] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.453] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.454] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.456] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.458] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.459] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.461] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.463] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.464] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.466] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.468] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.470] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.472] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.473] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.475] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.476] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.478] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.520] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.580] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.643] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.704] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.767] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.829] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.892] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:30.954] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:31.017] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:31.079] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:31.141] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:31.203] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:31.266] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:31.329] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:31.391] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:31.453] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:31.515] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:31.578] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:47:31.640] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:47:31.641] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 107.99436000008103 +[2026-05-03 06:47:31.642] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988915 +[2026-05-03 06:47:31.642] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 5.000581574408731 +[2026-05-03 06:47:32.450] [info] [clocksync.cpp:199] [1963] mcu 'toolhead': New minimum RTT: sent_time=921.270445772,half_rtt=0.0002539164999575405,freq=119998610.78188762 +[2026-05-03 06:47:34.418] [info] [clocksync.cpp:199] [1963] mcu 'toolhead': New minimum RTT: sent_time=923.239293106,half_rtt=0.0002492709999728504,freq=119998605.30810992 +[2026-05-03 06:47:34.667] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:34.669] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:34.670] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:47:34.682] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=250251498 trigger_emit_ticks=250635849 +[2026-05-03 06:47:34.684] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 250251498 107624433898 trigger_emit_ticks 250635849 107624818249 +[2026-05-03 06:47:34.686] [info] [homing.cpp:266] [1885] endstop_name probe tt 898.2845022556395 trigger_time 898.2845022556395 move_end_print_time 898.537885575115 +[2026-05-03 06:47:34.686] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1950 trig_steps -1948 start_pos -102011 trig_pos -103959 halt_pos -103961 +[2026-05-03 06:47:35.424] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999998509 5.9970100000959405 0.28138030648053824 spos 0.28058157440875675 probing_z 0.13058157440873064 +[2026-05-03 06:47:35.425] [info] [gcode.cpp:559] [1885] probe at 101.997,5.997 is z=0.281380 +[2026-05-03 06:47:35.426] [info] [load_cell_probe.cpp:333] [1885] run_probe time 3.7855423349999455 +[2026-05-03 06:47:35.427] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 107.99436000008103 +[2026-05-03 06:47:35.427] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988915 +[2026-05-03 06:47:35.428] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.1255815744087123 +[2026-05-03 06:47:35.920] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:35.921] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:35.935] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=400625169 trigger_emit_ticks=401009545 +[2026-05-03 06:47:35.937] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 400625169 107774807569 trigger_emit_ticks 401009545 107775191945 +[2026-05-03 06:47:35.938] [info] [homing.cpp:266] [1885] endstop_name probe tt 899.537631292549 trigger_time 899.537631292549 move_end_print_time 899.7897360833333 +[2026-05-03 06:47:35.939] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -409 trig_steps -408 start_pos -103561 trig_pos -103969 halt_pos -103970 +[2026-05-03 06:47:36.874] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999998509 5.9970100000959405 0.2791881833712033 spos 0.2780815744087022 probing_z 0.1055815744087123 +[2026-05-03 06:47:36.874] [info] [gcode.cpp:559] [1885] probe at 101.997,5.997 is z=0.279188 +[2026-05-03 06:47:36.875] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4493255419999969 +[2026-05-03 06:47:36.876] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 107.99436000008103 +[2026-05-03 06:47:36.877] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988915 +[2026-05-03 06:47:36.877] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.1030815744086944 +[2026-05-03 06:47:37.366] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:37.366] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:37.376] [info] [clocksync.cpp:212] [1961] mcu 'bed_sensor': Ignoring clock sample: sent_time=926.1931058160001,time_avg=896.6327218424806,freq=119998624.57157049,diff=432930.89907836914(0.0036077574923197428),stddev=3166.2959739059434 +[2026-05-03 06:47:37.383] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=574123433 trigger_emit_ticks=574507807 +[2026-05-03 06:47:37.386] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 574123433 107948305833 trigger_emit_ticks 574507807 107948690207 +[2026-05-03 06:47:37.387] [info] [homing.cpp:266] [1885] endstop_name probe tt 900.9834674701679 trigger_time 900.9834674701679 move_end_print_time 901.2350984166667 +[2026-05-03 06:47:37.387] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -403 trig_steps -401 start_pos -103570 trig_pos -103971 halt_pos -103973 +[2026-05-03 06:47:38.226] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999998509 5.9970100000959405 0.27475525482960284 spos 0.27558157440870445 probing_z 0.10058157440869442 +[2026-05-03 06:47:38.227] [info] [gcode.cpp:559] [1885] probe at 101.997,5.997 is z=0.274755 +[2026-05-03 06:47:38.228] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.352254126000048 +[2026-05-03 06:47:38.228] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 101.99734999998509 5.9970100000959405 0.2784412482271148 +[2026-05-03 06:47:38.228] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:47:38.230] [info] [probe.cpp:857] [1885] _move_next 5 probe_points.size 121 + +[2026-05-03 06:47:38.239] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.0047800000803 +[2026-05-03 06:47:38.239] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989754 +[2026-05-03 06:47:38.239] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574408814 +[2026-05-03 06:47:39.392] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:39.393] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:39.407] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=817263453 trigger_emit_ticks=817647827 +[2026-05-03 06:47:39.409] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 817263453 108191445853 trigger_emit_ticks 817647827 108191830227 +[2026-05-03 06:47:39.410] [info] [homing.cpp:266] [1885] endstop_name probe tt 903.0096581277094 trigger_time 903.0096581277094 move_end_print_time 903.2648775013131 +[2026-05-03 06:47:39.410] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1147 trig_steps -1145 start_pos -102811 trig_pos -103956 halt_pos -103958 +[2026-05-03 06:47:40.190] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999998892 6.003240000091381 0.29382604617245534 spos 0.2930815744088022 probing_z 0.13808157440881352 +[2026-05-03 06:47:40.190] [info] [gcode.cpp:559] [1885] probe at 126.002,6.003 is z=0.293826 +[2026-05-03 06:47:40.193] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.962252375999924 +[2026-05-03 06:47:40.194] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.0047800000803 +[2026-05-03 06:47:40.194] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989754 +[2026-05-03 06:47:40.194] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.133081574408795 +[2026-05-03 06:47:40.686] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:40.687] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:40.701] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=972333057 trigger_emit_ticks=972717431 +[2026-05-03 06:47:40.703] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 972333057 108346515457 trigger_emit_ticks 972717431 108346899831 +[2026-05-03 06:47:40.705] [info] [homing.cpp:266] [1885] endstop_name probe tt 904.301919188963 trigger_time 904.301919188963 move_end_print_time 904.556031875 +[2026-05-03 06:47:40.705] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -409 trig_steps -404 start_pos -103558 trig_pos -103962 halt_pos -103967 +[2026-05-03 06:47:41.585] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999998892 6.003240000091381 0.29117657070442604 spos 0.2905815744088045 probing_z 0.12308157440879497 +[2026-05-03 06:47:41.586] [info] [gcode.cpp:559] [1885] probe at 126.002,6.003 is z=0.291177 +[2026-05-03 06:47:41.587] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3938065009999718 +[2026-05-03 06:47:41.588] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.0047800000803 +[2026-05-03 06:47:41.588] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989754 +[2026-05-03 06:47:41.588] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.1105815744087768 +[2026-05-03 06:47:42.075] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:42.076] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:42.092] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1139204704 trigger_emit_ticks=1139588715 +[2026-05-03 06:47:42.094] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1139204704 108513387104 trigger_emit_ticks 1139588715 108513771115 +[2026-05-03 06:47:42.095] [info] [homing.cpp:266] [1885] endstop_name probe tt 905.69252662418 trigger_time 905.69252662418 move_end_print_time 905.9454024583333 +[2026-05-03 06:47:42.095] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -397 trig_steps -396 start_pos -103567 trig_pos -103963 halt_pos -103964 +[2026-05-03 06:47:42.935] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999998892 6.003240000091381 0.2917341077800365 spos 0.2905815744088045 probing_z 0.12058157440877681 +[2026-05-03 06:47:42.935] [info] [gcode.cpp:559] [1885] probe at 126.002,6.003 is z=0.291734 +[2026-05-03 06:47:42.936] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.34922845899996 +[2026-05-03 06:47:42.936] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 126.0015399999889 6.003240000091381 0.2922455748856393 +[2026-05-03 06:47:42.937] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:47:42.937] [info] [probe.cpp:857] [1885] _move_next 6 probe_points.size 121 + +[2026-05-03 06:47:42.946] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.00274000003395 +[2026-05-03 06:47:42.946] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 143.99625999986944 +[2026-05-03 06:47:42.946] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574408896 +[2026-05-03 06:47:44.090] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:44.091] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:44.104] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1381380119 +[2026-05-03 06:47:44.106] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 107374182400 trigger_emit_ticks 1381380119 108755562519 +[2026-05-03 06:47:44.108] [info] [homing.cpp:266] [1885] endstop_name probe tt 907.7074758225667 trigger_time 907.7074758225667 move_end_print_time 907.9601549166666 +[2026-05-03 06:47:44.108] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1129 trig_steps -1128 start_pos -102811 trig_pos -103939 halt_pos -103940 +[2026-05-03 06:47:44.992] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999999517 6.003240000082258 0.33102817055277933 spos 0.33058157440893865 probing_z 0.1805815744088961 +[2026-05-03 06:47:44.993] [info] [gcode.cpp:559] [1885] probe at 149.999,6.003 is z=0.331028 +[2026-05-03 06:47:44.993] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.05546829299999 +[2026-05-03 06:47:44.995] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.00274000003395 +[2026-05-03 06:47:44.995] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 143.99625999986944 +[2026-05-03 06:47:44.995] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.1780815744088762 +[2026-05-03 06:47:45.488] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:45.488] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:45.516] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1548728689 trigger_emit_ticks=1549113065 +[2026-05-03 06:47:45.518] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1548728689 108922911089 trigger_emit_ticks 1549113065 108923295465 +[2026-05-03 06:47:45.519] [info] [homing.cpp:266] [1885] endstop_name probe tt 909.1052651548712 trigger_time 909.1052651548712 move_end_print_time 909.357906125 +[2026-05-03 06:47:45.519] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -410 trig_steps -409 start_pos -103540 trig_pos -103949 halt_pos -103950 +[2026-05-03 06:47:46.347] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999999517 6.003240000082258 0.3285079926592074 spos 0.3280815744088841 probing_z 0.1555815744088762 +[2026-05-03 06:47:46.347] [info] [gcode.cpp:559] [1885] probe at 149.999,6.003 is z=0.328508 +[2026-05-03 06:47:46.348] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.354621542000018 +[2026-05-03 06:47:46.349] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.00274000003395 +[2026-05-03 06:47:46.349] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 143.99625999986944 +[2026-05-03 06:47:46.350] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.1530815744088572 +[2026-05-03 06:47:46.838] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:46.838] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:46.853] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1710685615 trigger_emit_ticks=1711069991 +[2026-05-03 06:47:46.855] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1710685615 109084868015 trigger_emit_ticks 1711069991 109085252391 +[2026-05-03 06:47:46.856] [info] [homing.cpp:266] [1885] endstop_name probe tt 910.4549222180823 trigger_time 910.4549222180823 move_end_print_time 910.706892 +[2026-05-03 06:47:46.856] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -103550 trig_pos -103949 halt_pos -103950 +[2026-05-03 06:47:47.685] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999999517 6.003240000082258 0.3278195549500018 spos 0.3280815744088841 probing_z 0.15558157440885712 +[2026-05-03 06:47:47.685] [info] [gcode.cpp:559] [1885] probe at 149.999,6.003 is z=0.327820 +[2026-05-03 06:47:47.687] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.338656333999893 +[2026-05-03 06:47:47.688] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 149.9994999999517 6.003240000082258 0.32911857272066286 +[2026-05-03 06:47:47.688] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:47:47.689] [info] [probe.cpp:857] [1885] _move_next 7 probe_points.size 121 + +[2026-05-03 06:47:47.697] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.0006999999876 +[2026-05-03 06:47:47.697] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 167.9942199998231 +[2026-05-03 06:47:47.697] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744089763 +[2026-05-03 06:47:48.841] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:48.841] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:48.855] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1951051887 trigger_emit_ticks=1951436263 +[2026-05-03 06:47:48.856] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1951051887 109325234287 trigger_emit_ticks 1951436263 109325618663 +[2026-05-03 06:47:48.858] [info] [homing.cpp:266] [1885] endstop_name probe tt 912.4579983973692 trigger_time 912.4579983973692 move_end_print_time 912.7102809583333 +[2026-05-03 06:47:48.858] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1131 trig_steps -1130 start_pos -102811 trig_pos -103941 halt_pos -103942 +[2026-05-03 06:47:49.793] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.99745999990535 6.003240000082258 0.31847381787102336 spos 0.31808157440900686 probing_z 0.17558157440897615 +[2026-05-03 06:47:49.793] [info] [gcode.cpp:559] [1885] probe at 173.997,6.003 is z=0.318474 +[2026-05-03 06:47:49.794] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1046243339999364 +[2026-05-03 06:47:49.795] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.0006999999876 +[2026-05-03 06:47:49.795] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 167.9942199998231 +[2026-05-03 06:47:49.795] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.1730815744089567 +[2026-05-03 06:47:50.289] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:50.290] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:50.307] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2124919074 trigger_emit_ticks=2125303425 +[2026-05-03 06:47:50.310] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2124919074 109499101474 trigger_emit_ticks 2125303425 109499485825 +[2026-05-03 06:47:50.311] [info] [homing.cpp:266] [1885] endstop_name probe tt 913.9069091756675 trigger_time 913.9069091756675 move_end_print_time 914.1596198333333 +[2026-05-03 06:47:50.311] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -411 trig_steps -410 start_pos -103542 trig_pos -103952 halt_pos -103953 +[2026-05-03 06:47:51.246] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.99745999990535 6.003240000082258 0.3160000588407408 spos 0.3155815744089523 probing_z 0.14808157440895675 +[2026-05-03 06:47:51.247] [info] [gcode.cpp:559] [1885] probe at 173.997,6.003 is z=0.316000 +[2026-05-03 06:47:51.248] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4537536259999797 +[2026-05-03 06:47:51.250] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.0006999999876 +[2026-05-03 06:47:51.250] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 167.9942199998231 +[2026-05-03 06:47:51.250] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.1455815744089377 +[2026-05-03 06:47:51.739] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:51.740] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:51.757] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2298959759 trigger_emit_ticks=2299344135 +[2026-05-03 06:47:51.759] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2298959759 109673142159 trigger_emit_ticks 2299344135 109673526535 +[2026-05-03 06:47:51.760] [info] [homing.cpp:266] [1885] endstop_name probe tt 915.3572661935627 trigger_time 915.3572661935627 move_end_print_time 915.6092294583333 +[2026-05-03 06:47:51.760] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -403 trig_steps -402 start_pos -103553 trig_pos -103955 halt_pos -103956 +[2026-05-03 06:47:52.699] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.99745999990535 6.003240000082258 0.312171748427162 spos 0.3130815744088977 probing_z 0.1405815744089376 +[2026-05-03 06:47:52.699] [info] [gcode.cpp:559] [1885] probe at 173.997,6.003 is z=0.312172 +[2026-05-03 06:47:52.700] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4521378339999274 +[2026-05-03 06:47:52.701] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 173.99745999990535 6.003240000082258 0.31554854171297536 +[2026-05-03 06:47:52.701] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:47:52.702] [info] [probe.cpp:857] [1885] _move_next 8 probe_points.size 121 + +[2026-05-03 06:47:52.711] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994125 +[2026-05-03 06:47:52.711] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 192.0046399997767 +[2026-05-03 06:47:52.711] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574409057 +[2026-05-03 06:47:53.851] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:53.851] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:53.852] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:47:53.866] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2552279287 trigger_emit_ticks=2552663663 +[2026-05-03 06:47:53.868] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2552279287 109926461687 trigger_emit_ticks 2552663663 109926846063 +[2026-05-03 06:47:53.870] [info] [homing.cpp:266] [1885] endstop_name probe tt 917.468292059383 trigger_time 917.468292059383 move_end_print_time 917.720542125 +[2026-05-03 06:47:53.870] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1124 trig_steps -1123 start_pos -102811 trig_pos -103934 halt_pos -103935 +[2026-05-03 06:47:54.807] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.00164999985898 5.99701000008227 0.3278291497469583 spos 0.3280815744090546 probing_z 0.19308157440905704 +[2026-05-03 06:47:54.808] [info] [gcode.cpp:559] [1885] probe at 198.002,5.997 is z=0.327829 +[2026-05-03 06:47:54.809] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.106547542000044 +[2026-05-03 06:47:54.810] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994122 +[2026-05-03 06:47:54.810] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 192.00463999977669 +[2026-05-03 06:47:54.810] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.1905815744090371 +[2026-05-03 06:47:55.306] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:55.322] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2726918325 trigger_emit_ticks=2727302699 +[2026-05-03 06:47:55.324] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2726918325 110101100725 trigger_emit_ticks 2727302699 110101485099 +[2026-05-03 06:47:55.325] [info] [homing.cpp:266] [1885] endstop_name probe tt 918.923636875441 trigger_time 918.923636875441 move_end_print_time 919.1756656666666 +[2026-05-03 06:47:55.325] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -414 trig_steps -413 start_pos -103535 trig_pos -103948 halt_pos -103949 +[2026-05-03 06:47:56.155] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.00164999985896 5.99701000008227 0.3228116374877057 spos 0.32308157440905916 probing_z 0.15808157440903714 +[2026-05-03 06:47:56.155] [info] [gcode.cpp:559] [1885] probe at 198.002,5.997 is z=0.322812 +[2026-05-03 06:47:56.156] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3471954169999663 +[2026-05-03 06:47:56.157] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994122 +[2026-05-03 06:47:56.158] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 192.00463999977669 +[2026-05-03 06:47:56.158] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.155581574409018 +[2026-05-03 06:47:56.646] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:56.647] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:56.662] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2887732383 trigger_emit_ticks=2888116757 +[2026-05-03 06:47:56.664] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2887732383 110261914783 trigger_emit_ticks 2888116757 110262299157 +[2026-05-03 06:47:56.665] [info] [homing.cpp:266] [1885] endstop_name probe tt 920.2637710657247 trigger_time 920.2637710657247 move_end_print_time 920.5154965 +[2026-05-03 06:47:56.665] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -399 trig_steps -398 start_pos -103549 trig_pos -103947 halt_pos -103948 +[2026-05-03 06:47:57.602] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.00164999985896 5.99701000008227 0.3256047144145098 spos 0.3255815744090569 probing_z 0.1605815744090181 +[2026-05-03 06:47:57.602] [info] [gcode.cpp:559] [1885] probe at 198.002,5.997 is z=0.325605 +[2026-05-03 06:47:57.603] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4464965429999666 +[2026-05-03 06:47:57.603] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 198.00164999985896 5.99701000008227 0.32541516721639124 +[2026-05-03 06:47:57.604] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:47:57.604] [info] [probe.cpp:857] [1885] _move_next 9 probe_points.size 121 + +[2026-05-03 06:47:57.613] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.99661999989488 +[2026-05-03 06:47:57.613] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 216.00259999973034 +[2026-05-03 06:47:57.613] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744091375 +[2026-05-03 06:47:58.751] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:47:58.752] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:47:58.766] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3140390243 trigger_emit_ticks=3140774617 +[2026-05-03 06:47:58.779] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3140390243 trigger_emit_ticks=3140774617 +[2026-05-03 06:47:58.780] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3140390243 110514572643 trigger_emit_ticks 3140774617 110514957017 +[2026-05-03 06:47:58.781] [info] [homing.cpp:266] [1885] endstop_name probe tt 922.3692788529099 trigger_time 922.3692788529099 move_end_print_time 922.6209598333334 +[2026-05-03 06:47:58.782] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1121 trig_steps -1120 start_pos -102811 trig_pos -103931 halt_pos -103932 +[2026-05-03 06:47:59.664] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.9996099998126 5.99701000008227 0.32354841435549897 spos 0.323081574409116 probing_z 0.20058157440913726 +[2026-05-03 06:47:59.665] [info] [gcode.cpp:559] [1885] probe at 222.000,5.997 is z=0.323548 +[2026-05-03 06:47:59.666] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.060679751000066 +[2026-05-03 06:47:59.667] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.99661999989488 +[2026-05-03 06:47:59.667] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 216.00259999973034 +[2026-05-03 06:47:59.667] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.1980815744091173 +[2026-05-03 06:48:00.163] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:00.164] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:00.178] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3309753841 trigger_emit_ticks=3310138215 +[2026-05-03 06:48:00.191] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3309753841 trigger_emit_ticks=3310138215 +[2026-05-03 06:48:00.192] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3309753841 110683936241 trigger_emit_ticks 3310138215 110684320615 +[2026-05-03 06:48:00.193] [info] [homing.cpp:266] [1885] endstop_name probe tt 923.7806597502725 trigger_time 923.7806597502725 move_end_print_time 924.0327445 +[2026-05-03 06:48:00.194] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -416 trig_steps -415 start_pos -103532 trig_pos -103947 halt_pos -103948 +[2026-05-03 06:48:01.123] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.9996099998126 5.99701000008227 0.31812403168900927 spos 0.31808157440912055 probing_z 0.16058157440911724 +[2026-05-03 06:48:01.123] [info] [gcode.cpp:559] [1885] probe at 222.000,5.997 is z=0.318124 +[2026-05-03 06:48:01.124] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.458395333999988 +[2026-05-03 06:48:01.125] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.99661999989488 +[2026-05-03 06:48:01.126] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 216.00259999973034 +[2026-05-03 06:48:01.126] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.1580815744090982 +[2026-05-03 06:48:01.615] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:01.615] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:01.630] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3483999411 trigger_emit_ticks=3484383787 +[2026-05-03 06:48:01.632] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3483999411 110858181811 trigger_emit_ticks 3484383787 110858566187 +[2026-05-03 06:48:01.635] [info] [homing.cpp:266] [1885] endstop_name probe tt 925.2327249092714 trigger_time 925.2327249092714 move_end_print_time 925.484946875 +[2026-05-03 06:48:01.635] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -401 trig_steps -400 start_pos -103548 trig_pos -103948 halt_pos -103949 +[2026-05-03 06:48:02.463] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.9996099998126 5.99701000008227 0.31902692863476245 spos 0.31808157440912055 probing_z 0.1580815744090982 +[2026-05-03 06:48:02.464] [info] [gcode.cpp:559] [1885] probe at 222.000,5.997 is z=0.319027 +[2026-05-03 06:48:02.465] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3403042510000205 +[2026-05-03 06:48:02.465] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 221.9996099998126 5.99701000008227 0.32023312489309025 +[2026-05-03 06:48:02.465] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:48:02.466] [info] [probe.cpp:857] [1885] _move_next 10 probe_points.size 121 + +[2026-05-03 06:48:02.474] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984853 +[2026-05-03 06:48:02.474] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 240.000559999684 +[2026-05-03 06:48:02.474] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744092175 +[2026-05-03 06:48:03.618] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:03.619] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:03.633] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3724351501 trigger_emit_ticks=3724735877 +[2026-05-03 06:48:03.636] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3724351501 111098533901 trigger_emit_ticks 3724735877 111098918277 +[2026-05-03 06:48:03.638] [info] [homing.cpp:266] [1885] endstop_name probe tt 927.2356822598284 trigger_time 927.2356822598284 move_end_print_time 927.4880944583333 +[2026-05-03 06:48:03.638] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1132 trig_steps -1131 start_pos -102811 trig_pos -103942 halt_pos -103943 +[2026-05-03 06:48:04.520] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.99756999976626 5.99701000008227 0.2936736357391796 spos 0.29308157440920013 probing_z 0.17308157440921734 +[2026-05-03 06:48:04.520] [info] [gcode.cpp:559] [1885] probe at 245.998,5.997 is z=0.293674 +[2026-05-03 06:48:04.521] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.054303000999994 +[2026-05-03 06:48:04.522] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984853 +[2026-05-03 06:48:04.522] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 240.000559999684 +[2026-05-03 06:48:04.522] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.1705815744091979 +[2026-05-03 06:48:04.937] [info] [clocksync.cpp:199] [1963] mcu 'toolhead': New minimum RTT: sent_time=953.7578419959999,half_rtt=0.0002455625000266082,freq=119998589.53462258 +[2026-05-03 06:48:05.034] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:05.035] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:05.055] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3894192533 trigger_emit_ticks=3894576907 +[2026-05-03 06:48:05.057] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3894192533 111268374933 trigger_emit_ticks 3894576907 111268759307 +[2026-05-03 06:48:05.058] [info] [homing.cpp:266] [1885] endstop_name probe tt 928.6510414613509 trigger_time 928.6510414613509 move_end_print_time 928.908818625 +[2026-05-03 06:48:05.058] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -420 trig_steps -418 start_pos -103543 trig_pos -103961 halt_pos -103963 +[2026-05-03 06:48:05.987] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.99756999976626 5.99701000008227 0.2844026455922266 spos 0.28558157440920695 probing_z 0.12558157440919793 +[2026-05-03 06:48:05.988] [info] [gcode.cpp:559] [1885] probe at 245.998,5.997 is z=0.284403 +[2026-05-03 06:48:05.988] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.46720341799994 +[2026-05-03 06:48:05.990] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984853 +[2026-05-03 06:48:05.990] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 240.000559999684 +[2026-05-03 06:48:05.990] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.1205815744091794 +[2026-05-03 06:48:06.481] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:06.482] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:06.500] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4067764985 trigger_emit_ticks=4068149361 +[2026-05-03 06:48:06.502] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4067764985 111441947385 trigger_emit_ticks 4068149361 111442331761 +[2026-05-03 06:48:06.503] [info] [homing.cpp:266] [1885] endstop_name probe tt 930.0974961898631 trigger_time 930.0974961898631 move_end_print_time 930.351814875 +[2026-05-03 06:48:06.504] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -402 start_pos -103563 trig_pos -103965 halt_pos -103969 +[2026-05-03 06:48:07.434] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.99756999976626 5.99701000008227 0.2814753165546331 spos 0.2805815744092115 probing_z 0.11558157440917927 +[2026-05-03 06:48:07.434] [info] [gcode.cpp:559] [1885] probe at 245.998,5.997 is z=0.281475 +[2026-05-03 06:48:07.435] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4466687919999686 +[2026-05-03 06:48:07.436] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 245.99756999976626 5.99701000008227 0.2865171992953464 +[2026-05-03 06:48:07.436] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:48:07.437] [info] [probe.cpp:857] [1885] _move_next 11 probe_points.size 121 + +[2026-05-03 06:48:07.438] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:48:07.439] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:48:07.440] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.449] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.451] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.453] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.454] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.456] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.457] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.459] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.461] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.463] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.464] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.466] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.467] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.469] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.470] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.472] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.473] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.475] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.476] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.478] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.480] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.482] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.524] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.586] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.648] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.710] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.773] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.835] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.897] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:07.960] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:08.022] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:08.084] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:08.147] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:08.209] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:08.272] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:08.334] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:08.397] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:08.458] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:08.521] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:08.583] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:08.646] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:48:08.647] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.0049999998934 +[2026-05-03 06:48:08.647] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 216.00259999973034 +[2026-05-03 06:48:08.648] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 5.000581574409256 +[2026-05-03 06:48:11.701] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:11.702] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:11.715] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=399207673 trigger_emit_ticks=399591977 +[2026-05-03 06:48:11.717] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 399207673 112068357369 trigger_emit_ticks 399591977 112068741673 +[2026-05-03 06:48:11.718] [info] [homing.cpp:266] [1885] endstop_name probe tt 935.3176439909405 trigger_time 935.3176439909405 move_end_print_time 935.5710178333334 +[2026-05-03 06:48:11.719] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -2006 trig_steps -2003 start_pos -102011 trig_pos -104014 halt_pos -104017 +[2026-05-03 06:48:12.605] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 246.00379999981186 30.00120000008154 0.13868774001670217 spos 0.13808157440928426 probing_z -0.006918425590744626 +[2026-05-03 06:48:12.606] [info] [gcode.cpp:559] [1885] probe at 246.004,30.001 is z=0.138688 +[2026-05-03 06:48:12.606] [info] [load_cell_probe.cpp:333] [1885] run_probe time 3.9600422510000044 +[2026-05-03 06:48:12.608] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.0049999998934 +[2026-05-03 06:48:12.608] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 216.0025999997303 +[2026-05-03 06:48:12.608] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9855815744092405 +[2026-05-03 06:48:13.101] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:13.101] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:13.119] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=567305851 trigger_emit_ticks=567690225 +[2026-05-03 06:48:13.120] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 567305851 112236455547 trigger_emit_ticks 567690225 112236839921 +[2026-05-03 06:48:13.122] [info] [homing.cpp:266] [1885] endstop_name probe tt 936.718482336312 trigger_time 936.718482336312 move_end_print_time 936.971354625 +[2026-05-03 06:48:13.122] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -408 trig_steps -406 start_pos -103617 trig_pos -104023 halt_pos -104025 +[2026-05-03 06:48:14.065] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 246.00379999981186 30.001200000081553 0.13487335846996476 spos 0.1355815744092297 probing_z -0.029418425590759578 +[2026-05-03 06:48:14.065] [info] [gcode.cpp:559] [1885] probe at 246.004,30.001 is z=0.134873 +[2026-05-03 06:48:14.066] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.459742168000048 +[2026-05-03 06:48:14.067] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.0049999998934 +[2026-05-03 06:48:14.068] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 216.0025999997303 +[2026-05-03 06:48:14.068] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9655815744092255 +[2026-05-03 06:48:14.559] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:14.560] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:14.574] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=742122537 trigger_emit_ticks=742506913 +[2026-05-03 06:48:14.576] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 742122537 112411272233 trigger_emit_ticks 742506913 112411656609 +[2026-05-03 06:48:14.578] [info] [homing.cpp:266] [1885] endstop_name probe tt 938.1753077847396 trigger_time 938.1753077847396 move_end_print_time 938.4293579583333 +[2026-05-03 06:48:14.578] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -405 trig_steps -401 start_pos -103625 trig_pos -104026 halt_pos -104030 +[2026-05-03 06:48:15.503] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 246.00379999981186 30.001200000081553 0.1321237231133732 spos 0.13308157440923196 probing_z -0.036918425590774406 +[2026-05-03 06:48:15.503] [info] [gcode.cpp:559] [1885] probe at 246.004,30.001 is z=0.132124 +[2026-05-03 06:48:15.504] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.437842125999964 +[2026-05-03 06:48:15.505] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 246.00379999981183 30.00120000008155 0.13522827386668004 +[2026-05-03 06:48:15.505] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:48:15.506] [info] [probe.cpp:857] [1885] _move_next 12 probe_points.size 121 + +[2026-05-03 06:48:15.514] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984853 +[2026-05-03 06:48:15.514] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 192.00463999977666 +[2026-05-03 06:48:15.515] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574409345 +[2026-05-03 06:48:16.693] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:16.694] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:16.708] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=998396117 trigger_emit_ticks=998780514 +[2026-05-03 06:48:16.710] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 998396117 112667545813 trigger_emit_ticks 998780514 112667930210 +[2026-05-03 06:48:16.711] [info] [homing.cpp:266] [1885] endstop_name probe tt 940.3109490659474 trigger_time 940.3109490659474 move_end_print_time 940.5637101666666 +[2026-05-03 06:48:16.711] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1183 trig_steps -1181 start_pos -102811 trig_pos -103992 halt_pos -103994 +[2026-05-03 06:48:17.592] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.9996099998126 29.994970000035934 0.1707543710968427 spos 0.17058157440936839 probing_z 0.048081574409344796 +[2026-05-03 06:48:17.593] [info] [gcode.cpp:559] [1885] probe at 222.000,29.995 is z=0.170754 +[2026-05-03 06:48:17.594] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.0872625839999728 +[2026-05-03 06:48:17.595] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984855 +[2026-05-03 06:48:17.595] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 192.00463999977666 +[2026-05-03 06:48:17.595] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.0430815744093282 +[2026-05-03 06:48:18.091] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:18.092] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:18.114] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1166125595 trigger_emit_ticks=1166509969 +[2026-05-03 06:48:18.116] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1166125595 112835275291 trigger_emit_ticks 1166509969 112835659665 +[2026-05-03 06:48:18.117] [info] [homing.cpp:266] [1885] endstop_name probe tt 941.708712077133 trigger_time 941.708712077133 move_end_print_time 941.9618221666667 +[2026-05-03 06:48:18.118] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -416 trig_steps -415 start_pos -103594 trig_pos -104009 halt_pos -104010 +[2026-05-03 06:48:19.047] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.9996099998126 29.99497000003595 0.16525668286931097 spos 0.1655815744093161 probing_z 0.0055815744093281605 +[2026-05-03 06:48:19.047] [info] [gcode.cpp:559] [1885] probe at 222.000,29.995 is z=0.165257 +[2026-05-03 06:48:19.048] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4547910420000107 +[2026-05-03 06:48:19.050] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984855 +[2026-05-03 06:48:19.050] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 192.00463999977666 +[2026-05-03 06:48:19.050] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.0030815744093124 +[2026-05-03 06:48:19.549] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:19.551] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:48:19.581] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1341027441 trigger_emit_ticks=1341402443 +[2026-05-03 06:48:19.583] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1341027441 113010177137 trigger_emit_ticks 1341402443 113010552139 +[2026-05-03 06:48:19.584] [info] [homing.cpp:266] [1885] endstop_name probe tt 943.166167284386 trigger_time 943.166167284386 move_end_print_time 943.41855825 +[2026-05-03 06:48:19.584] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -399 trig_steps -397 start_pos -103610 trig_pos -104007 halt_pos -104009 +[2026-05-03 06:48:20.514] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.9996099998126 29.99497000003595 0.1643212756609236 spos 0.16308157440926152 probing_z 0.0105815744093124 +[2026-05-03 06:48:20.515] [info] [gcode.cpp:559] [1885] probe at 222.000,29.995 is z=0.164321 +[2026-05-03 06:48:20.516] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4671180839999352 +[2026-05-03 06:48:20.516] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 221.9996099998126 29.994970000035945 0.16677744320902577 +[2026-05-03 06:48:20.516] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:48:20.517] [info] [probe.cpp:857] [1885] _move_next 13 probe_points.size 121 + +[2026-05-03 06:48:20.527] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998949 +[2026-05-03 06:48:20.527] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 167.99421999982303 +[2026-05-03 06:48:20.527] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574409432 +[2026-05-03 06:48:21.705] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:21.705] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:21.720] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1599762187 trigger_emit_ticks=1600146563 +[2026-05-03 06:48:21.722] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1599762187 113268911883 trigger_emit_ticks 1600146563 113269296259 +[2026-05-03 06:48:21.723] [info] [homing.cpp:266] [1885] endstop_name probe tt 945.3223923603063 trigger_time 945.3223923603063 move_end_print_time 945.5746178333334 +[2026-05-03 06:48:21.724] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1187 trig_steps -1186 start_pos -102811 trig_pos -103997 halt_pos -103998 +[2026-05-03 06:48:22.605] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 197.99541999985897 30.001200000035936 0.15573176624049404 spos 0.15558157440943887 probing_z 0.035581574409432104 +[2026-05-03 06:48:22.605] [info] [gcode.cpp:559] [1885] probe at 197.995,30.001 is z=0.155732 +[2026-05-03 06:48:22.606] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.088246042999913 +[2026-05-03 06:48:22.607] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.99661999989488 +[2026-05-03 06:48:22.608] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 167.994219999823 +[2026-05-03 06:48:22.608] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.0330815744094153 +[2026-05-03 06:48:23.106] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:23.107] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:23.108] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:48:23.123] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1767839327 trigger_emit_ticks=1768223701 +[2026-05-03 06:48:23.125] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1767839327 113436989023 trigger_emit_ticks 1768223701 113437373397 +[2026-05-03 06:48:23.125] [info] [homing.cpp:266] [1885] endstop_name probe tt 946.723051707178 trigger_time 946.723051707178 move_end_print_time 946.9768104166667 +[2026-05-03 06:48:23.126] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -421 trig_steps -418 start_pos -103598 trig_pos -104016 halt_pos -104019 +[2026-05-03 06:48:24.053] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 197.99541999985894 30.001200000035936 0.14646597321814994 spos 0.14558157440944797 probing_z -0.011918425590584647 +[2026-05-03 06:48:24.053] [info] [gcode.cpp:559] [1885] probe at 197.995,30.001 is z=0.146466 +[2026-05-03 06:48:24.054] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.44778041699999 +[2026-05-03 06:48:24.055] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.99661999989488 +[2026-05-03 06:48:24.055] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 167.994219999823 +[2026-05-03 06:48:24.055] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9805815744094 +[2026-05-03 06:48:24.557] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:24.557] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:24.589] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1942059714 trigger_emit_ticks=1942444067 +[2026-05-03 06:48:24.591] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1942059714 113611209410 trigger_emit_ticks 1942444067 113611593763 +[2026-05-03 06:48:24.593] [info] [homing.cpp:266] [1885] endstop_name probe tt 948.174904596563 trigger_time 948.174904596563 move_end_print_time 948.4401933333334 +[2026-05-03 06:48:24.593] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -103619 trig_pos -104018 halt_pos -104019 +[2026-05-03 06:48:25.522] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 197.99541999985894 30.001200000035936 0.1462421973810635 spos 0.14558157440944797 probing_z -0.016918425590600084 +[2026-05-03 06:48:25.522] [info] [gcode.cpp:559] [1885] probe at 197.995,30.001 is z=0.146242 +[2026-05-03 06:48:25.523] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4688251669999772 +[2026-05-03 06:48:25.523] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 197.9954199998589 30.001200000035936 0.14947997894656917 +[2026-05-03 06:48:25.524] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:48:25.525] [info] [probe.cpp:857] [1885] _move_next 14 probe_points.size 121 + +[2026-05-03 06:48:25.534] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994122 +[2026-05-03 06:48:25.534] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 143.99625999986935 +[2026-05-03 06:48:25.535] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744095194 +[2026-05-03 06:48:26.710] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:26.711] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:26.724] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2200412617 trigger_emit_ticks=2200796993 +[2026-05-03 06:48:26.727] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2200412617 113869562313 trigger_emit_ticks 2200796993 113869946689 +[2026-05-03 06:48:26.728] [info] [homing.cpp:266] [1885] endstop_name probe tt 950.3278711708026 trigger_time 950.3278711708026 move_end_print_time 950.579559125 +[2026-05-03 06:48:26.728] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1180 trig_steps -1179 start_pos -102811 trig_pos -103990 halt_pos -103991 +[2026-05-03 06:48:27.508] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.9974599999053 30.001200000035936 0.18007091063856787 spos 0.18058157440952982 probing_z 0.05308157440951922 +[2026-05-03 06:48:27.509] [info] [gcode.cpp:559] [1885] probe at 173.997,30.001 is z=0.180071 +[2026-05-03 06:48:27.510] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.984395460000087 +[2026-05-03 06:48:27.511] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994122 +[2026-05-03 06:48:27.511] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 143.99625999986935 +[2026-05-03 06:48:27.511] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.0505815744095024 +[2026-05-03 06:48:28.012] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:28.013] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:28.028] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2356689144 trigger_emit_ticks=2357073495 +[2026-05-03 06:48:28.030] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2356689144 114025838840 trigger_emit_ticks 2357073495 114026223191 +[2026-05-03 06:48:28.031] [info] [homing.cpp:266] [1885] endstop_name probe tt 951.6301909232559 trigger_time 951.6301909232559 move_end_print_time 951.8823429583333 +[2026-05-03 06:48:28.031] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -421 trig_steps -420 start_pos -103591 trig_pos -104011 halt_pos -104012 +[2026-05-03 06:48:28.964] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.9974599999053 30.001200000035936 0.17085761926972268 spos 0.17058157440953892 probing_z 0.0005815744095023501 +[2026-05-03 06:48:28.964] [info] [gcode.cpp:559] [1885] probe at 173.997,30.001 is z=0.170858 +[2026-05-03 06:48:28.965] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4552023339999778 +[2026-05-03 06:48:28.966] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994122 +[2026-05-03 06:48:28.966] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 143.99625999986935 +[2026-05-03 06:48:28.966] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9980815744094866 +[2026-05-03 06:48:29.459] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:29.459] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:29.475] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2530028801 trigger_emit_ticks=2530413177 +[2026-05-03 06:48:29.476] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2530028801 114199178497 trigger_emit_ticks 2530413177 114199562873 +[2026-05-03 06:48:29.477] [info] [homing.cpp:266] [1885] endstop_name probe tt 953.0747044612009 trigger_time 953.0747044612009 move_end_print_time 953.3286905416667 +[2026-05-03 06:48:29.477] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -408 trig_steps -403 start_pos -103612 trig_pos -104015 halt_pos -104020 +[2026-05-03 06:48:30.305] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.9974599999053 30.001200000035936 0.1652547824420685 spos 0.16558157440948662 probing_z -0.009418425590513424 +[2026-05-03 06:48:30.306] [info] [gcode.cpp:559] [1885] probe at 173.997,30.001 is z=0.165255 +[2026-05-03 06:48:30.307] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3413827919999903 +[2026-05-03 06:48:30.307] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 173.99745999990532 30.001200000035936 0.17206110411678635 +[2026-05-03 06:48:30.307] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:48:30.308] [info] [probe.cpp:857] [1885] _move_next 15 probe_points.size 121 + +[2026-05-03 06:48:30.316] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.00069999998757 +[2026-05-03 06:48:30.317] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989744 +[2026-05-03 06:48:30.317] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574409606 +[2026-05-03 06:48:31.494] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:31.495] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:31.510] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2774547553 trigger_emit_ticks=2774931927 +[2026-05-03 06:48:31.523] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2774547553 trigger_emit_ticks=2774931927 +[2026-05-03 06:48:31.525] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2774547553 114443697249 trigger_emit_ticks 2774931927 114444081623 +[2026-05-03 06:48:31.526] [info] [homing.cpp:266] [1885] endstop_name probe tt 955.1123836537437 trigger_time 955.1123836537437 move_end_print_time 955.3640517916666 +[2026-05-03 06:48:31.526] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1183 trig_steps -1182 start_pos -102811 trig_pos -103993 halt_pos -103994 +[2026-05-03 06:48:32.361] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.99949999994251 30.001200000045067 0.17415966684458797 spos 0.17308157440959349 probing_z 0.045581574409605974 +[2026-05-03 06:48:32.361] [info] [gcode.cpp:559] [1885] probe at 149.999,30.001 is z=0.174160 +[2026-05-03 06:48:32.362] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.053430875999993 +[2026-05-03 06:48:32.363] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.00069999998755 +[2026-05-03 06:48:32.363] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989743 +[2026-05-03 06:48:32.363] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.0430815744095894 +[2026-05-03 06:48:32.865] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:32.866] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:32.880] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2938973686 trigger_emit_ticks=2939358039 +[2026-05-03 06:48:32.882] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2938973686 114608123382 trigger_emit_ticks 2939358039 114608507735 +[2026-05-03 06:48:32.884] [info] [homing.cpp:266] [1885] endstop_name probe tt 956.4826172605848 trigger_time 956.4826172605848 move_end_print_time 956.7353530416667 +[2026-05-03 06:48:32.884] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -426 trig_steps -425 start_pos -103594 trig_pos -104019 halt_pos -104020 +[2026-05-03 06:48:33.759] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999999425 30.00120000004506 0.15976672526597716 spos 0.16058157440960485 probing_z -0.019418425590410626 +[2026-05-03 06:48:33.760] [info] [gcode.cpp:559] [1885] probe at 149.999,30.001 is z=0.159767 +[2026-05-03 06:48:33.761] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3983341260000088 +[2026-05-03 06:48:33.762] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.00069999998755 +[2026-05-03 06:48:33.762] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989743 +[2026-05-03 06:48:33.762] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9780815744095741 +[2026-05-03 06:48:34.253] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:34.254] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:34.269] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3105413617 trigger_emit_ticks=3105797993 +[2026-05-03 06:48:34.270] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3105413617 114774563313 trigger_emit_ticks 3105797993 114774947689 +[2026-05-03 06:48:34.271] [info] [homing.cpp:266] [1885] endstop_name probe tt 957.869632548891 trigger_time 957.869632548891 move_end_print_time 958.123577375 +[2026-05-03 06:48:34.272] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -402 start_pos -103620 trig_pos -104022 halt_pos -104026 +[2026-05-03 06:48:35.109] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999999425 30.00120000004506 0.15908882250946912 spos 0.15808157440955029 probing_z -0.02691842559042601 +[2026-05-03 06:48:35.110] [info] [gcode.cpp:559] [1885] probe at 149.999,30.001 is z=0.159089 +[2026-05-03 06:48:35.111] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3498975009999867 +[2026-05-03 06:48:35.111] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 149.9994999999425 30.00120000004506 0.16433840487334475 +[2026-05-03 06:48:35.111] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:48:35.112] [info] [probe.cpp:857] [1885] _move_next 16 probe_points.size 121 + +[2026-05-03 06:48:35.121] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.0027400000339 +[2026-05-03 06:48:35.121] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988904 +[2026-05-03 06:48:35.121] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744096935 +[2026-05-03 06:48:36.299] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:36.300] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:36.316] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3351098159 trigger_emit_ticks=3351482533 +[2026-05-03 06:48:36.318] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3351098159 115020247855 trigger_emit_ticks 3351482533 115020632229 +[2026-05-03 06:48:36.319] [info] [homing.cpp:266] [1885] endstop_name probe tt 959.917027142443 trigger_time 959.917027142443 move_end_print_time 960.1693102083333 +[2026-05-03 06:48:36.319] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1183 trig_steps -1182 start_pos -102811 trig_pos -103993 halt_pos -103994 +[2026-05-03 06:48:37.164] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999996147 30.00120000007243 0.17122809732160474 spos 0.17058157440970945 probing_z 0.04558157440969346 +[2026-05-03 06:48:37.164] [info] [gcode.cpp:559] [1885] probe at 126.002,30.001 is z=0.171228 +[2026-05-03 06:48:37.165] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.0524054170000454 +[2026-05-03 06:48:37.166] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.0027400000339 +[2026-05-03 06:48:37.166] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988904 +[2026-05-03 06:48:37.166] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.0430815744096769 +[2026-05-03 06:48:37.669] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:37.670] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:37.684] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3515424987 trigger_emit_ticks=3515809363 +[2026-05-03 06:48:37.686] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3515424987 115184574683 trigger_emit_ticks 3515809363 115184959059 +[2026-05-03 06:48:37.687] [info] [homing.cpp:266] [1885] endstop_name probe tt 961.2864335782991 trigger_time 961.2864335782991 move_end_print_time 961.5390434166667 +[2026-05-03 06:48:37.688] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -426 trig_steps -425 start_pos -103594 trig_pos -104019 halt_pos -104020 +[2026-05-03 06:48:38.518] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999996147 30.00120000007243 0.16019731133415618 spos 0.1605815744096617 probing_z -0.01941842559032314 +[2026-05-03 06:48:38.518] [info] [gcode.cpp:559] [1885] probe at 126.002,30.001 is z=0.160197 +[2026-05-03 06:48:38.519] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3535956260000148 +[2026-05-03 06:48:38.520] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.0027400000339 +[2026-05-03 06:48:38.520] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988904 +[2026-05-03 06:48:38.520] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9780815744096616 +[2026-05-03 06:48:39.009] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:39.010] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:39.024] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3676292475 trigger_emit_ticks=3676676851 +[2026-05-03 06:48:39.026] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3676292475 115345442171 trigger_emit_ticks 3676676851 115345826547 +[2026-05-03 06:48:39.027] [info] [homing.cpp:266] [1885] endstop_name probe tt 962.6270123691293 trigger_time 962.6270123691293 move_end_print_time 962.8788614166667 +[2026-05-03 06:48:39.027] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -402 trig_steps -401 start_pos -103620 trig_pos -104021 halt_pos -104022 +[2026-05-03 06:48:39.659] [info] [heaters.cpp:405] [1955] __func__:temperature_callback,heater_name:heater_bed,read_time:963.27800000038,last_temp:61.09182952426056,temp:61.09182952426056,target_temp:60,smoothed_temp:61.1101658091794 +[2026-05-03 06:48:39.862] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999996147 30.00120000007243 0.15822395430230676 spos 0.15808157440966397 probing_z -0.024418425590338355 +[2026-05-03 06:48:39.863] [info] [gcode.cpp:559] [1885] probe at 126.002,30.001 is z=0.158224 +[2026-05-03 06:48:39.864] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.344943083999965 +[2026-05-03 06:48:39.864] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 126.00153999996148 30.00120000007243 0.1632164543193559 +[2026-05-03 06:48:39.865] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:48:39.866] [info] [probe.cpp:857] [1885] _move_next 17 probe_points.size 121 + +[2026-05-03 06:48:39.874] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.00478000008025 +[2026-05-03 06:48:39.874] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988065 +[2026-05-03 06:48:39.874] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574409781 +[2026-05-03 06:48:41.054] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:41.054] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:41.070] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3921576357 trigger_emit_ticks=3921960733 +[2026-05-03 06:48:41.071] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3921576357 115590726053 trigger_emit_ticks 3921960733 115591110429 +[2026-05-03 06:48:41.072] [info] [homing.cpp:266] [1885] endstop_name probe tt 964.6710704543308 trigger_time 964.6710704543308 move_end_print_time 964.923666 +[2026-05-03 06:48:41.072] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1184 trig_steps -1183 start_pos -102811 trig_pos -103994 halt_pos -103995 +[2026-05-03 06:48:41.968] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 102.00357999998045 30.0012000000998 0.16381362603928776 spos 0.1630815744097731 probing_z 0.043081574409781 +[2026-05-03 06:48:41.970] [info] [gcode.cpp:559] [1885] probe at 102.004,30.001 is z=0.163814 +[2026-05-03 06:48:41.971] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.104502125999943 +[2026-05-03 06:48:41.972] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.00478000008025 +[2026-05-03 06:48:41.973] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988065 +[2026-05-03 06:48:41.973] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.0405815744097644 +[2026-05-03 06:48:42.475] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:42.476] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:42.494] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4092132207 trigger_emit_ticks=4092516579 +[2026-05-03 06:48:42.495] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4092132207 115761281903 trigger_emit_ticks 4092516579 115761666275 +[2026-05-03 06:48:42.496] [info] [homing.cpp:266] [1885] endstop_name probe tt 966.0923864509595 trigger_time 966.0923864509595 move_end_print_time 966.3442072916666 +[2026-05-03 06:48:42.496] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -427 trig_steps -426 start_pos -103595 trig_pos -104021 halt_pos -104022 +[2026-05-03 06:48:42.811] [info] [heaters.cpp:405] [1963] __func__:temperature_callback,heater_name:extruder,read_time:966.4292502124753,last_temp:140.92425143162365,temp:140.92425143162365,target_temp:140,smoothed_temp:140.88696622587827 +[2026-05-03 06:48:43.429] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 102.00357999998045 30.0012000000998 0.152252886205313 spos 0.1530815744097822 probing_z -0.02441842559023555 +[2026-05-03 06:48:43.429] [info] [gcode.cpp:559] [1885] probe at 102.004,30.001 is z=0.152253 +[2026-05-03 06:48:43.430] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4588309179999897 +[2026-05-03 06:48:43.431] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.00478000008025 +[2026-05-03 06:48:43.432] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988065 +[2026-05-03 06:48:43.432] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9730815744097491 +[2026-05-03 06:48:43.923] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:43.939] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4265953103 trigger_emit_ticks=4266337477 +[2026-05-03 06:48:43.942] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4265953103 115935102799 trigger_emit_ticks 4266337477 115935487173 +[2026-05-03 06:48:43.943] [info] [homing.cpp:266] [1885] endstop_name probe tt 967.5409114566091 trigger_time 967.5409114566091 move_end_print_time 967.7930595416667 +[2026-05-03 06:48:43.943] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -406 start_pos -103622 trig_pos -104028 halt_pos -104029 +[2026-05-03 06:48:44.874] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 102.00357999998045 30.0012000000998 0.1494508448354063 spos 0.15058157440972764 probing_z -0.04191842559025105 +[2026-05-03 06:48:44.874] [info] [gcode.cpp:559] [1885] probe at 102.004,30.001 is z=0.149451 +[2026-05-03 06:48:44.875] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.444477792999919 +[2026-05-03 06:48:44.875] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 102.00357999998045 30.0012000000998 0.15517245236000235 +[2026-05-03 06:48:44.876] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:48:44.876] [info] [probe.cpp:857] [1885] _move_next 18 probe_points.size 121 + +[2026-05-03 06:48:44.878] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:48:44.879] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:48:44.880] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.889] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.891] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.892] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.894] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.896] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.897] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.899] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.901] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.903] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.904] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.906] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.907] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.909] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.910] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.912] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.913] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.915] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.916] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.918] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.920] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.922] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:44.971] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:45.034] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:45.096] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:45.158] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:45.220] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:45.283] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:45.345] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:45.407] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:45.470] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:45.533] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:45.597] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:45.657] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:45.719] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:45.782] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:45.844] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:45.907] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:45.968] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:46.031] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:48:46.097] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:48:46.098] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 107.99436000008097 +[2026-05-03 06:48:46.098] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.004419999872255 +[2026-05-03 06:48:46.098] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 5.000581574409826 +[2026-05-03 06:48:49.143] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:49.155] [warning] [tmc.cpp:887] [1885] Stepper stepper_z phase change (was 4 now 3) +[2026-05-03 06:48:49.157] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=597312231 trigger_emit_ticks=597696607 +[2026-05-03 06:48:49.158] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 597312231 116561429223 trigger_emit_ticks 597696607 116561813599 +[2026-05-03 06:48:49.160] [info] [homing.cpp:266] [1885] endstop_name probe tt 972.7603639080465 trigger_time 972.7603639080465 move_end_print_time 973.012484625 +[2026-05-03 06:48:49.160] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1994 trig_steps -1993 start_pos -102011 trig_pos -104004 halt_pos -104005 +[2026-05-03 06:48:50.097] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999997661 29.99497000010436 0.1630897786568495 spos 0.16308157440982995 probing_z 0.01808157440982594 +[2026-05-03 06:48:50.097] [info] [gcode.cpp:559] [1885] probe at 77.999,29.995 is z=0.163090 +[2026-05-03 06:48:50.098] [info] [load_cell_probe.cpp:333] [1885] run_probe time 4.00147845999993 +[2026-05-03 06:48:50.099] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 107.99436000008097 +[2026-05-03 06:48:50.100] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.004419999872255 +[2026-05-03 06:48:50.100] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.0155815744098096 +[2026-05-03 06:48:50.608] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:50.609] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:50.636] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=773140963 trigger_emit_ticks=773525337 +[2026-05-03 06:48:50.638] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 773140963 116737257955 trigger_emit_ticks 773525337 116737642329 +[2026-05-03 06:48:50.639] [info] [homing.cpp:266] [1885] endstop_name probe tt 974.2256212516776 trigger_time 974.2256212516776 move_end_print_time 974.4887168333333 +[2026-05-03 06:48:50.639] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -417 trig_steps -416 start_pos -103605 trig_pos -104021 halt_pos -104022 +[2026-05-03 06:48:51.569] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999997661 29.99497000010436 0.15443140579804784 spos 0.15558157440983678 probing_z -0.024418425590190473 +[2026-05-03 06:48:51.570] [info] [gcode.cpp:559] [1885] probe at 77.999,29.995 is z=0.154431 +[2026-05-03 06:48:51.571] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.472196459000088 +[2026-05-03 06:48:51.572] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 107.99436000008097 +[2026-05-03 06:48:51.572] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.004419999872255 +[2026-05-03 06:48:51.572] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9730815744097944 +[2026-05-03 06:48:52.060] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:52.061] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:52.078] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=947441317 trigger_emit_ticks=947825691 +[2026-05-03 06:48:52.080] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 947441317 116911558309 trigger_emit_ticks 947825691 116911942683 +[2026-05-03 06:48:52.081] [info] [homing.cpp:266] [1885] endstop_name probe tt 975.6781415268281 trigger_time 975.6781415268281 move_end_print_time 975.9307000833334 +[2026-05-03 06:48:52.081] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -401 trig_steps -400 start_pos -103622 trig_pos -104022 halt_pos -104023 +[2026-05-03 06:48:53.009] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999997661 29.99497000010436 0.15236726112486024 spos 0.1530815744097822 probing_z -0.02691842559020563 +[2026-05-03 06:48:53.010] [info] [gcode.cpp:559] [1885] probe at 77.999,29.995 is z=0.152367 +[2026-05-03 06:48:53.011] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4396300419999761 +[2026-05-03 06:48:53.011] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 77.99938999997661 29.99497000010436 0.1566294818599192 +[2026-05-03 06:48:53.011] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:48:53.012] [info] [probe.cpp:857] [1885] _move_next 19 probe_points.size 121 + +[2026-05-03 06:48:53.021] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 83.99640000007258 +[2026-05-03 06:48:53.021] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.99399999986843 +[2026-05-03 06:48:53.021] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574409914 +[2026-05-03 06:48:54.204] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:54.204] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:54.219] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1204432217 trigger_emit_ticks=1204816591 +[2026-05-03 06:48:54.220] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1204432217 117168549209 trigger_emit_ticks 1204816591 117168933583 +[2026-05-03 06:48:54.222] [info] [homing.cpp:266] [1885] endstop_name probe tt 977.8197588058586 trigger_time 977.8197588058586 move_end_print_time 978.074377625 +[2026-05-03 06:48:54.222] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1192 trig_steps -1187 start_pos -102811 trig_pos -103998 halt_pos -104003 +[2026-05-03 06:48:55.104] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 53.99519999997051 30.001200000102077 0.15711924767660748 spos 0.15808157440989135 probing_z 0.03308157440991355 +[2026-05-03 06:48:55.105] [info] [gcode.cpp:559] [1885] probe at 53.995,30.001 is z=0.157119 +[2026-05-03 06:48:55.106] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.0931945850001057 +[2026-05-03 06:48:55.107] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 83.99640000007258 +[2026-05-03 06:48:55.107] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868436 +[2026-05-03 06:48:55.107] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.0205815744098976 +[2026-05-03 06:48:55.619] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:55.619] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:55.642] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1374408733 trigger_emit_ticks=1374793107 +[2026-05-03 06:48:55.644] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1374408733 117338525725 trigger_emit_ticks 1374793107 117338910099 +[2026-05-03 06:48:55.645] [info] [homing.cpp:266] [1885] endstop_name probe tt 979.2362483396996 trigger_time 979.2362483396996 move_end_print_time 979.494465625 +[2026-05-03 06:48:55.645] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -420 trig_steps -419 start_pos -103603 trig_pos -104022 halt_pos -104023 +[2026-05-03 06:48:56.576] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 53.99519999997051 30.001200000102074 0.14486852837674571 spos 0.14558157440990271 probing_z -0.02691842559010249 +[2026-05-03 06:48:56.576] [info] [gcode.cpp:559] [1885] probe at 53.995,30.001 is z=0.144869 +[2026-05-03 06:48:56.577] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4713309999999638 +[2026-05-03 06:48:56.579] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 83.99640000007258 +[2026-05-03 06:48:56.579] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868436 +[2026-05-03 06:48:56.579] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9705815744098825 +[2026-05-03 06:48:57.070] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:57.071] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:57.086] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1548611011 trigger_emit_ticks=1548995387 +[2026-05-03 06:48:57.088] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1548611011 117512728003 trigger_emit_ticks 1548995387 117513112379 +[2026-05-03 06:48:57.089] [info] [homing.cpp:266] [1885] endstop_name probe tt 980.687953448343 trigger_time 980.687953448343 move_end_print_time 980.9412034166667 +[2026-05-03 06:48:57.090] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -403 trig_steps -402 start_pos -103623 trig_pos -104025 halt_pos -104026 +[2026-05-03 06:48:58.020] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 53.99519999997051 30.001200000102074 0.14373875016560092 spos 0.143081574409905 probing_z -0.03441842559011765 +[2026-05-03 06:48:58.021] [info] [gcode.cpp:559] [1885] probe at 53.995,30.001 is z=0.143739 +[2026-05-03 06:48:58.022] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4440234170000394 +[2026-05-03 06:48:58.022] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 53.99519999997051 30.001200000102074 0.1485755087396514 +[2026-05-03 06:48:58.022] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:48:58.023] [info] [probe.cpp:857] [1885] _move_next 20 probe_points.size 121 + +[2026-05-03 06:48:58.032] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 59.99844000006419 +[2026-05-03 06:48:58.032] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130551966 +[2026-05-03 06:48:58.032] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744100017 +[2026-05-03 06:48:59.214] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:48:59.215] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:48:59.228] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1805873201 trigger_emit_ticks=1806257575 +[2026-05-03 06:48:59.230] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1805873201 117769990193 trigger_emit_ticks 1806257575 117770374567 +[2026-05-03 06:48:59.231] [info] [homing.cpp:266] [1885] endstop_name probe tt 982.8318330669351 trigger_time 982.8318330669351 move_end_print_time 983.0844216666667 +[2026-05-03 06:48:59.232] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1191 trig_steps -1189 start_pos -102811 trig_pos -104000 halt_pos -104002 +[2026-05-03 06:49:00.112] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.99723999996682 30.001200000097374 0.1476573467106244 spos 0.14808157441001413 probing_z 0.028081574410001586 +[2026-05-03 06:49:00.112] [info] [gcode.cpp:559] [1885] probe at 29.997,30.001 is z=0.147657 +[2026-05-03 06:49:00.113] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.0894337510000014 +[2026-05-03 06:49:00.114] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 59.99844000006419 +[2026-05-03 06:49:00.114] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130557972 +[2026-05-03 06:49:00.114] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.0230815744099855 +[2026-05-03 06:49:00.626] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:00.628] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:00.644] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1975256087 trigger_emit_ticks=1975640461 +[2026-05-03 06:49:00.646] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1975256087 117939373079 trigger_emit_ticks 1975640461 117939757453 +[2026-05-03 06:49:00.647] [info] [homing.cpp:266] [1885] endstop_name probe tt 984.2433747300729 trigger_time 984.2433747300729 move_end_print_time 984.4988272083333 +[2026-05-03 06:49:00.648] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -422 trig_steps -420 start_pos -103602 trig_pos -104022 halt_pos -104024 +[2026-05-03 06:49:01.575] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999966816 30.001200000097377 0.13674389092267217 spos 0.1355815744100255 probing_z -0.02691842559001456 +[2026-05-03 06:49:01.576] [info] [gcode.cpp:559] [1885] probe at 29.997,30.001 is z=0.136744 +[2026-05-03 06:49:01.675] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.5620247089999566 +[2026-05-03 06:49:01.677] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 59.99844000006419 +[2026-05-03 06:49:01.677] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130561525 +[2026-05-03 06:49:01.677] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9680815744099704 +[2026-05-03 06:49:02.184] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:02.185] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:02.212] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2162114083 trigger_emit_ticks=2162498482 +[2026-05-03 06:49:02.214] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2162114083 118126231075 trigger_emit_ticks 2162498482 118126615474 +[2026-05-03 06:49:02.215] [info] [homing.cpp:266] [1885] endstop_name probe tt 985.8005440887127 trigger_time 985.8005440887127 move_end_print_time 986.063114875 +[2026-05-03 06:49:02.215] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -402 start_pos -103624 trig_pos -104026 halt_pos -104030 +[2026-05-03 06:49:03.148] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999966816 30.001200000097377 0.13227536014519894 spos 0.13308157440997093 probing_z -0.03691842559002967 +[2026-05-03 06:49:03.148] [info] [gcode.cpp:559] [1885] probe at 29.997,30.001 is z=0.132275 +[2026-05-03 06:49:03.149] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.473072333999994 +[2026-05-03 06:49:03.149] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 29.99723999996682 30.001200000097374 0.1388921992594985 +[2026-05-03 06:49:03.149] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:49:03.150] [info] [probe.cpp:857] [1885] _move_next 21 probe_points.size 121 + +[2026-05-03 06:49:03.158] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 36.0004800000558 +[2026-05-03 06:49:03.158] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129548 +[2026-05-03 06:49:03.158] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744100897 +[2026-05-03 06:49:04.350] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:04.353] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:49:04.353] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:49:04.366] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2422144559 trigger_emit_ticks=2422528935 +[2026-05-03 06:49:04.368] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2422144559 118386261551 trigger_emit_ticks 2422528935 118386645927 +[2026-05-03 06:49:04.369] [info] [homing.cpp:266] [1885] endstop_name probe tt 987.9674909097697 trigger_time 987.9674909097697 move_end_print_time 988.2211897916667 +[2026-05-03 06:49:04.369] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1207 trig_steps -1205 start_pos -102811 trig_pos -104016 halt_pos -104018 +[2026-05-03 06:49:05.304] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999963127 30.001200000092673 0.10506183784645187 spos 0.10558157441010962 probing_z -0.01191842558991052 +[2026-05-03 06:49:05.304] [info] [gcode.cpp:559] [1885] probe at 5.999,30.001 is z=0.105062 +[2026-05-03 06:49:05.305] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1545501260000037 +[2026-05-03 06:49:05.306] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 36.0004800000558 +[2026-05-03 06:49:05.307] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129545 +[2026-05-03 06:49:05.307] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9830815744100742 +[2026-05-03 06:49:05.810] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:05.826] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2597397059 trigger_emit_ticks=2597781435 +[2026-05-03 06:49:05.828] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2597397059 118561514051 trigger_emit_ticks 2597781435 118561898427 +[2026-05-03 06:49:05.829] [info] [homing.cpp:266] [1885] endstop_name probe tt 989.4279456966352 trigger_time 989.4279456966352 move_end_print_time 989.680040875 +[2026-05-03 06:49:05.829] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -430 trig_steps -429 start_pos -103618 trig_pos -104047 halt_pos -104048 +[2026-05-03 06:49:06.773] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999963129 30.001200000092673 0.093803019986784 spos 0.09308157441006415 probing_z -0.08941842558992585 +[2026-05-03 06:49:06.774] [info] [gcode.cpp:559] [1885] probe at 5.999,30.001 is z=0.093803 +[2026-05-03 06:49:06.775] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4690403760000663 +[2026-05-03 06:49:06.776] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 36.0004800000558 +[2026-05-03 06:49:06.776] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129545 +[2026-05-03 06:49:06.776] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9080815744100604 +[2026-05-03 06:49:07.265] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:07.266] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:07.267] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:49:07.280] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2771963859 trigger_emit_ticks=2772348233 +[2026-05-03 06:49:07.282] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2771963859 118736080851 trigger_emit_ticks 2772348233 118736465225 +[2026-05-03 06:49:07.283] [info] [homing.cpp:266] [1885] endstop_name probe tt 990.8826851490095 trigger_time 990.8826851490095 move_end_print_time 991.1349381666666 +[2026-05-03 06:49:07.283] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -401 trig_steps -399 start_pos -103648 trig_pos -104047 halt_pos -104049 +[2026-05-03 06:49:08.123] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999963129 30.001200000092673 0.09189961146911943 spos 0.09308157441006415 probing_z -0.08941842558993962 +[2026-05-03 06:49:08.124] [info] [gcode.cpp:559] [1885] probe at 5.999,30.001 is z=0.091900 +[2026-05-03 06:49:08.125] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3499401669999997 +[2026-05-03 06:49:08.125] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 5.999279999963129 30.001200000092677 0.09692148976745178 +[2026-05-03 06:49:08.126] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:49:08.127] [info] [probe.cpp:857] [1885] _move_next 22 probe_points.size 121 + +[2026-05-03 06:49:08.136] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 59.99844000006419 +[2026-05-03 06:49:08.136] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013337 +[2026-05-03 06:49:08.136] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.00058157441018 +[2026-05-03 06:49:09.340] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:09.340] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:09.341] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:49:09.354] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3020949241 trigger_emit_ticks=3021333617 +[2026-05-03 06:49:09.357] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3020949241 118985066233 trigger_emit_ticks 3021333617 118985450609 +[2026-05-03 06:49:09.358] [info] [homing.cpp:266] [1885] endstop_name probe tt 992.9575871397726 trigger_time 992.9575871397726 move_end_print_time 993.2097095833333 +[2026-05-03 06:49:09.358] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1227 trig_steps -1226 start_pos -102811 trig_pos -104037 halt_pos -104038 +[2026-05-03 06:49:10.188] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.99927999996541 53.99916000009878 0.06778535399893351 spos 0.06808157441020057 probing_z -0.06441842558982014 +[2026-05-03 06:49:10.188] [info] [gcode.cpp:559] [1885] probe at 5.999,53.999 is z=0.067785 +[2026-05-03 06:49:10.189] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.0609878340000023 +[2026-05-03 06:49:10.190] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 59.99844000006419 +[2026-05-03 06:49:10.190] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013337 +[2026-05-03 06:49:10.190] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9330815744101656 +[2026-05-03 06:49:10.708] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:10.709] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:10.727] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3185040347 trigger_emit_ticks=3185424721 +[2026-05-03 06:49:10.728] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3185040347 119149157339 trigger_emit_ticks 3185424721 119149541713 +[2026-05-03 06:49:10.730] [info] [homing.cpp:266] [1885] endstop_name probe tt 994.3250295717365 trigger_time 994.3250295717365 move_end_print_time 994.578181375 +[2026-05-03 06:49:10.730] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -434 trig_steps -430 start_pos -103638 trig_pos -104068 halt_pos -104072 +[2026-05-03 06:49:11.659] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.99927999996541 53.99916000009878 0.04422728653891142 spos 0.04308157441016647 probing_z -0.14191842558983436 +[2026-05-03 06:49:11.660] [info] [gcode.cpp:559] [1885] probe at 5.999,53.999 is z=0.044227 +[2026-05-03 06:49:11.661] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4716479590000517 +[2026-05-03 06:49:11.662] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 59.99844000006419 +[2026-05-03 06:49:11.662] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013337 +[2026-05-03 06:49:11.662] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8480815744101532 +[2026-05-03 06:49:12.154] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:12.154] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:12.173] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3358439803 trigger_emit_ticks=3358824177 +[2026-05-03 06:49:12.176] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3358439803 119322556795 trigger_emit_ticks 3358824177 119322941169 +[2026-05-03 06:49:12.178] [info] [homing.cpp:266] [1885] endstop_name probe tt 995.7700419137861 trigger_time 995.7700419137861 move_end_print_time 996.02370225 +[2026-05-03 06:49:12.178] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -402 start_pos -103672 trig_pos -104074 halt_pos -104078 +[2026-05-03 06:49:13.110] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.99927999996541 53.99916000009878 0.04496398123363657 spos 0.04558157441010735 probing_z -0.15691842558984692 +[2026-05-03 06:49:13.110] [info] [gcode.cpp:559] [1885] probe at 5.999,53.999 is z=0.044964 +[2026-05-03 06:49:13.111] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4505494170000475 +[2026-05-03 06:49:13.112] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 5.99927999996541 53.99916000009878 0.05232554059049383 +[2026-05-03 06:49:13.112] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:49:13.113] [info] [probe.cpp:857] [1885] _move_next 23 probe_points.size 121 + +[2026-05-03 06:49:13.122] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 83.99640000007258 +[2026-05-03 06:49:13.122] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129545 +[2026-05-03 06:49:13.122] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744102726 +[2026-05-03 06:49:14.325] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:14.325] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:14.340] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3619122241 trigger_emit_ticks=3619506615 +[2026-05-03 06:49:14.342] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3619122241 119583239233 trigger_emit_ticks 3619506615 119583623607 +[2026-05-03 06:49:14.343] [info] [homing.cpp:266] [1885] endstop_name probe tt 997.9424208829538 trigger_time 997.9424208829538 move_end_print_time 998.19499275 +[2026-05-03 06:49:14.343] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1219 trig_steps -1218 start_pos -102811 trig_pos -104029 halt_pos -104030 +[2026-05-03 06:49:15.287] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.99723999997152 53.999160000101064 0.07748781303654309 spos 0.07808157441024832 probing_z -0.044418425589727306 +[2026-05-03 06:49:15.287] [info] [gcode.cpp:559] [1885] probe at 29.997,53.999 is z=0.077488 +[2026-05-03 06:49:15.289] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1753043349998507 +[2026-05-03 06:49:15.290] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 83.99640000007257 +[2026-05-03 06:49:15.290] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.00192000012954 +[2026-05-03 06:49:15.290] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.953081574410258 +[2026-05-03 06:49:15.794] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:15.795] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:15.813] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3795801845 +[2026-05-03 06:49:15.815] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 120259084288 trigger_emit_ticks 3795801845 119759918837 +[2026-05-03 06:49:15.816] [info] [homing.cpp:266] [1885] endstop_name probe tt 999.4115665951912 trigger_time 999.4115665951912 move_end_print_time 999.6638195 +[2026-05-03 06:49:15.816] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -430 trig_steps -429 start_pos -103630 trig_pos -104059 halt_pos -104060 +[2026-05-03 06:49:16.744] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999971512 53.99916000010106 0.0625797288976361 spos 0.06308157441020512 probing_z -0.11941842558974203 +[2026-05-03 06:49:16.745] [info] [gcode.cpp:559] [1885] probe at 29.997,53.999 is z=0.062580 +[2026-05-03 06:49:16.746] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4567460430000665 +[2026-05-03 06:49:16.747] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 83.99640000007257 +[2026-05-03 06:49:16.747] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129545 +[2026-05-03 06:49:16.747] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8780815744102449 +[2026-05-03 06:49:17.239] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:17.241] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:17.258] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3968641569 trigger_emit_ticks=3969025945 +[2026-05-03 06:49:17.262] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3968641569 119932758561 trigger_emit_ticks 3969025945 119933142937 +[2026-05-03 06:49:17.263] [info] [homing.cpp:266] [1885] endstop_name probe tt 1000.8551196470218 trigger_time 1000.8551196470218 move_end_print_time 1001.1094415 +[2026-05-03 06:49:17.264] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -403 start_pos -103660 trig_pos -104063 halt_pos -104067 +[2026-05-03 06:49:18.192] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999971512 53.99916000010106 0.057834643362572186 spos 0.05808157441020967 probing_z -0.12941842558975514 +[2026-05-03 06:49:18.193] [info] [gcode.cpp:559] [1885] probe at 29.997,53.999 is z=0.057835 +[2026-05-03 06:49:18.194] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.44802925099998 +[2026-05-03 06:49:18.194] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 29.997239999971516 53.99916000010106 0.06596739509891712 +[2026-05-03 06:49:18.194] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:49:18.195] [info] [probe.cpp:857] [1885] _move_next 24 probe_points.size 121 + +[2026-05-03 06:49:18.203] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 107.99436000008096 +[2026-05-03 06:49:18.203] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130558249 +[2026-05-03 06:49:18.203] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744103645 +[2026-05-03 06:49:19.406] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:19.406] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:19.420] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4228750687 trigger_emit_ticks=4229135063 +[2026-05-03 06:49:19.422] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4228750687 120192867679 trigger_emit_ticks 4229135063 120193252055 +[2026-05-03 06:49:19.424] [info] [homing.cpp:266] [1885] endstop_name probe tt 1003.0227208432176 trigger_time 1003.0227208432176 move_end_print_time 1003.2753511666666 +[2026-05-03 06:49:19.424] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1219 trig_steps -1216 start_pos -102811 trig_pos -104027 halt_pos -104030 +[2026-05-03 06:49:20.259] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 53.9951999999752 53.99916000010576 0.07473025158670946 spos 0.07558157441036428 probing_z -0.039418425589635486 +[2026-05-03 06:49:20.259] [info] [gcode.cpp:559] [1885] probe at 53.995,53.999 is z=0.074730 +[2026-05-03 06:49:20.260] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.064087542999914 +[2026-05-03 06:49:20.261] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 107.99436000008096 +[2026-05-03 06:49:20.261] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130561525 +[2026-05-03 06:49:20.261] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9530815744103499 +[2026-05-03 06:49:20.764] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:20.765] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:20.783] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=96929013 trigger_emit_ticks=97313389 +[2026-05-03 06:49:20.785] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 96929013 120356013301 trigger_emit_ticks 97313389 120356397677 +[2026-05-03 06:49:20.786] [info] [homing.cpp:266] [1885] endstop_name probe tt 1004.3822843125573 trigger_time 1004.3822843125573 move_end_print_time 1004.6346473333333 +[2026-05-03 06:49:20.786] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -430 trig_steps -429 start_pos -103630 trig_pos -104059 halt_pos -104060 +[2026-05-03 06:49:21.717] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 53.9951999999752 53.99916000010576 0.0619052503737946 spos 0.06308157441031881 probing_z -0.1194184255896501 +[2026-05-03 06:49:21.718] [info] [gcode.cpp:559] [1885] probe at 53.995,53.999 is z=0.061905 +[2026-05-03 06:49:21.719] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4585577930001818 +[2026-05-03 06:49:21.720] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 107.99436000008096 +[2026-05-03 06:49:21.720] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130561525 +[2026-05-03 06:49:21.720] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8780815744103369 +[2026-05-03 06:49:22.222] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:22.222] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:22.252] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=271781486 trigger_emit_ticks=272165839 +[2026-05-03 06:49:22.254] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 271781486 120530865774 trigger_emit_ticks 272165839 120531250127 +[2026-05-03 06:49:22.255] [info] [homing.cpp:266] [1885] endstop_name probe tt 1005.8394066812533 trigger_time 1005.8394066812533 move_end_print_time 1006.1055679166667 +[2026-05-03 06:49:22.255] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -402 trig_steps -401 start_pos -103660 trig_pos -104061 halt_pos -104062 +[2026-05-03 06:49:23.185] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 53.9951999999752 53.99916000010576 0.05723427297503095 spos 0.058081574410323356 probing_z -0.1244184255896631 +[2026-05-03 06:49:23.186] [info] [gcode.cpp:559] [1885] probe at 53.995,53.999 is z=0.057234 +[2026-05-03 06:49:23.186] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4675717089999125 +[2026-05-03 06:49:23.187] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 53.9951999999752 53.99916000010577 0.064623258311845 +[2026-05-03 06:49:23.187] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:49:23.188] [info] [probe.cpp:857] [1885] _move_next 25 probe_points.size 121 + +[2026-05-03 06:49:23.189] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:49:23.190] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:49:23.191] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.200] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.202] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.203] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.207] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.209] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.211] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.213] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.215] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.217] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.219] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.221] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.223] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.225] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.226] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.228] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.230] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.232] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.234] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.238] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.240] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.241] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.286] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.349] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.410] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.473] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.535] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.598] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.660] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.722] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.785] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.848] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.910] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:23.972] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:24.035] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:24.097] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:24.160] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:24.222] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:24.284] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:24.346] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:49:24.408] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:49:24.410] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.00478000008022 +[2026-05-03 06:49:24.410] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868425 +[2026-05-03 06:49:24.410] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 5.000581574410413 +[2026-05-03 06:49:27.476] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:27.492] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=902286485 trigger_emit_ticks=902670859 +[2026-05-03 06:49:27.493] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 902286485 121161370773 trigger_emit_ticks 902670859 121161755147 +[2026-05-03 06:49:27.495] [info] [homing.cpp:266] [1885] endstop_name probe tt 1011.0936845028108 trigger_time 1011.0936845028108 move_end_print_time 1011.3460344583333 +[2026-05-03 06:49:27.495] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -2031 trig_steps -2029 start_pos -102011 trig_pos -104040 halt_pos -104042 +[2026-05-03 06:49:28.394] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999997433 54.0053900001059 0.0746549814669937 spos 0.07558157441042113 probing_z -0.07191842558958683 +[2026-05-03 06:49:28.395] [info] [gcode.cpp:559] [1885] probe at 77.999,54.005 is z=0.074655 +[2026-05-03 06:49:28.396] [info] [load_cell_probe.cpp:333] [1885] run_probe time 3.9869145860000117 +[2026-05-03 06:49:28.397] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.0047800000802 +[2026-05-03 06:49:28.397] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.99399999986842 +[2026-05-03 06:49:28.397] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9230815744103992 +[2026-05-03 06:49:28.898] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:28.899] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:28.914] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1072810143 trigger_emit_ticks=1073194517 +[2026-05-03 06:49:28.915] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1072810143 121331894431 trigger_emit_ticks 1073194517 121332278805 +[2026-05-03 06:49:28.917] [info] [homing.cpp:266] [1885] endstop_name probe tt 1012.5147382585018 trigger_time 1012.5147382585018 move_end_print_time 1012.76834625 +[2026-05-03 06:49:28.917] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -425 trig_steps -421 start_pos -103642 trig_pos -104063 halt_pos -104067 +[2026-05-03 06:49:29.846] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999997431 54.00539000010588 0.053917142735686735 spos 0.053081574410384746 probing_z -0.12941842558960082 +[2026-05-03 06:49:29.846] [info] [gcode.cpp:559] [1885] probe at 77.999,54.005 is z=0.053917 +[2026-05-03 06:49:29.847] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4514882500000112 +[2026-05-03 06:49:29.848] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.0047800000802 +[2026-05-03 06:49:29.848] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.99399999986843 +[2026-05-03 06:49:29.849] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8605815744103865 +[2026-05-03 06:49:30.336] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:30.337] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:30.352] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1245525117 trigger_emit_ticks=1245909491 +[2026-05-03 06:49:30.354] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1245525117 121504609405 trigger_emit_ticks 1245909491 121504993779 +[2026-05-03 06:49:30.355] [info] [homing.cpp:266] [1885] endstop_name probe tt 1013.9540513429189 trigger_time 1013.9540513429189 move_end_print_time 1014.2067404583333 +[2026-05-03 06:49:30.355] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -399 trig_steps -398 start_pos -103667 trig_pos -104065 halt_pos -104066 +[2026-05-03 06:49:31.238] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999997431 54.005390000105876 0.05297179083949857 spos 0.053081574410384746 probing_z -0.13441842558961348 +[2026-05-03 06:49:31.238] [info] [gcode.cpp:559] [1885] probe at 77.999,54.005 is z=0.052972 +[2026-05-03 06:49:31.239] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3915101259999574 +[2026-05-03 06:49:31.239] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 77.99938999997431 54.00539000010588 0.060514638347393006 +[2026-05-03 06:49:31.240] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:49:31.240] [info] [probe.cpp:857] [1885] _move_next 26 probe_points.size 121 + +[2026-05-03 06:49:31.249] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.00274000003384 +[2026-05-03 06:49:31.249] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.00441999987226 +[2026-05-03 06:49:31.249] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744105058 +[2026-05-03 06:49:32.456] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:32.457] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:32.472] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1499952564 trigger_emit_ticks=1500336915 +[2026-05-03 06:49:32.474] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1499952564 121759036852 trigger_emit_ticks 1500336915 121759421203 +[2026-05-03 06:49:32.475] [info] [homing.cpp:266] [1885] endstop_name probe tt 1016.0743088921394 trigger_time 1016.0743088921394 move_end_print_time 1016.3264109583333 +[2026-05-03 06:49:32.475] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1230 trig_steps -1229 start_pos -102811 trig_pos -104040 halt_pos -104041 +[2026-05-03 06:49:33.307] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 102.00357999995305 53.99916000008079 0.045930649199160935 spos 0.045581574410505254 probing_z -0.07191842558949446 +[2026-05-03 06:49:33.308] [info] [gcode.cpp:559] [1885] probe at 102.004,53.999 is z=0.045931 +[2026-05-03 06:49:33.309] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.0676642509999965 +[2026-05-03 06:49:33.310] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.00274000003384 +[2026-05-03 06:49:33.310] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.004419999872255 +[2026-05-03 06:49:33.310] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9255815744104915 +[2026-05-03 06:49:33.816] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:33.817] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:33.834] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1663188579 trigger_emit_ticks=1663572955 +[2026-05-03 06:49:33.836] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1663188579 121922272867 trigger_emit_ticks 1663572955 121922657243 +[2026-05-03 06:49:33.837] [info] [homing.cpp:266] [1885] endstop_name probe tt 1017.4346274215126 trigger_time 1017.4346274215126 move_end_print_time 1017.6868630416667 +[2026-05-03 06:49:33.837] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -436 trig_steps -435 start_pos -103641 trig_pos -104076 halt_pos -104077 +[2026-05-03 06:49:34.783] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 102.00357999995305 53.99916000008079 0.030537445991442175 spos 0.030581574410462053 probing_z -0.16191842558950864 +[2026-05-03 06:49:34.784] [info] [gcode.cpp:559] [1885] probe at 102.004,53.999 is z=0.030537 +[2026-05-03 06:49:34.785] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4758624590001546 +[2026-05-03 06:49:34.786] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.00274000003384 +[2026-05-03 06:49:34.786] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.004419999872255 +[2026-05-03 06:49:34.786] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8355815744104793 +[2026-05-03 06:49:35.278] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:35.279] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:35.298] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1838801472 +[2026-05-03 06:49:35.300] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 120259084288 trigger_emit_ticks 1838801472 122097885760 +[2026-05-03 06:49:35.301] [info] [homing.cpp:266] [1885] endstop_name probe tt 1018.894883633084 trigger_time 1018.894883633084 move_end_print_time 1019.1480117083333 +[2026-05-03 06:49:35.301] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -404 start_pos -103677 trig_pos -104081 halt_pos -104083 +[2026-05-03 06:49:36.240] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 102.00357999995305 53.99916000008079 0.026291827100425352 spos 0.0255815744104666 probing_z -0.1744184255895207 +[2026-05-03 06:49:36.241] [info] [gcode.cpp:559] [1885] probe at 102.004,53.999 is z=0.026292 +[2026-05-03 06:49:36.242] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.456987750000053 +[2026-05-03 06:49:36.242] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 102.00357999995305 53.99916000008079 0.03425330743034282 +[2026-05-03 06:49:36.243] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:49:36.243] [info] [probe.cpp:857] [1885] _move_next 27 probe_points.size 121 + +[2026-05-03 06:49:36.252] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.0006999999875 +[2026-05-03 06:49:36.252] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988065 +[2026-05-03 06:49:36.252] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744105986 +[2026-05-03 06:49:37.459] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:37.459] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:37.474] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2100239467 trigger_emit_ticks=2100623843 +[2026-05-03 06:49:37.475] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2100239467 122359323755 trigger_emit_ticks 2100623843 122359708131 +[2026-05-03 06:49:37.476] [info] [homing.cpp:266] [1885] endstop_name probe tt 1021.0767641057226 trigger_time 1021.0767641057226 move_end_print_time 1021.32844875 +[2026-05-03 06:49:37.476] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1225 trig_steps -1224 start_pos -102811 trig_pos -104035 halt_pos -104036 +[2026-05-03 06:49:38.308] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999993407 53.99916000005342 0.06255221697309035 spos 0.06308157441060303 probing_z -0.05941842558940147 +[2026-05-03 06:49:38.309] [info] [gcode.cpp:559] [1885] probe at 126.002,53.999 is z=0.062552 +[2026-05-03 06:49:38.310] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.065533917000039 +[2026-05-03 06:49:38.311] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.0006999999875 +[2026-05-03 06:49:38.311] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988065 +[2026-05-03 06:49:38.311] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9380815744105842 +[2026-05-03 06:49:38.819] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:38.820] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:38.838] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2263469421 trigger_emit_ticks=2263853797 +[2026-05-03 06:49:38.840] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2263469421 122522553709 trigger_emit_ticks 2263853797 122522938085 +[2026-05-03 06:49:38.841] [info] [homing.cpp:266] [1885] endstop_name probe tt 1022.4370310187843 trigger_time 1022.4370310187843 move_end_print_time 1022.6971532499995 +[2026-05-03 06:49:38.842] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -436 trig_steps -435 start_pos -103636 trig_pos -104071 halt_pos -104072 +[2026-05-03 06:49:39.568] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999993407 53.99916000005342 0.04344173785032049 spos 0.04308157441056437 probing_z -0.14941842558941598 +[2026-05-03 06:49:39.569] [info] [gcode.cpp:559] [1885] probe at 126.002,53.999 is z=0.043442 +[2026-05-03 06:49:39.570] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2602052089998779 +[2026-05-03 06:49:39.571] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.0006999999875 +[2026-05-03 06:49:39.571] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988065 +[2026-05-03 06:49:39.571] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8480815744105716 +[2026-05-03 06:49:40.063] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:40.063] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:40.078] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2412788139 trigger_emit_ticks=2413172513 +[2026-05-03 06:49:40.080] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2412788139 122671872427 trigger_emit_ticks 2413172513 122672256801 +[2026-05-03 06:49:40.081] [info] [homing.cpp:266] [1885] endstop_name probe tt 1023.6813689367184 trigger_time 1023.6813689367184 move_end_print_time 1023.9329775833334 +[2026-05-03 06:49:40.081] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -404 trig_steps -403 start_pos -103672 trig_pos -104075 halt_pos -104076 +[2026-05-03 06:49:41.013] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999993407 53.99916000005342 0.039965918628650315 spos 0.040581574410566645 probing_z -0.15941842558942843 +[2026-05-03 06:49:41.013] [info] [gcode.cpp:559] [1885] probe at 126.002,53.999 is z=0.039966 +[2026-05-03 06:49:41.014] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4439935840000544 +[2026-05-03 06:49:41.014] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 126.00153999993408 53.99916000005342 0.048653291150687054 +[2026-05-03 06:49:41.015] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:49:41.015] [info] [probe.cpp:857] [1885] _move_next 28 probe_points.size 121 + +[2026-05-03 06:49:41.024] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994114 +[2026-05-03 06:49:41.024] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988904 +[2026-05-03 06:49:41.025] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574410691 +[2026-05-03 06:49:42.235] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:42.235] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:42.252] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2673251521 trigger_emit_ticks=2673626521 +[2026-05-03 06:49:42.254] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2673251521 122932335809 trigger_emit_ticks 2673626521 122932710809 +[2026-05-03 06:49:42.255] [info] [homing.cpp:266] [1885] endstop_name probe tt 1025.8518444869087 trigger_time 1025.8518444869087 move_end_print_time 1026.1050496666667 +[2026-05-03 06:49:42.256] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1235 trig_steps -1232 start_pos -102811 trig_pos -104043 halt_pos -104046 +[2026-05-03 06:49:43.201] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999999151 53.99916000002605 0.03413024069303153 spos 0.03308157441068715 probing_z -0.07941842558930912 +[2026-05-03 06:49:43.201] [info] [gcode.cpp:559] [1885] probe at 149.999,53.999 is z=0.034130 +[2026-05-03 06:49:43.202] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1861354600000595 +[2026-05-03 06:49:43.203] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994114 +[2026-05-03 06:49:43.203] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988904 +[2026-05-03 06:49:43.203] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9130815744106772 +[2026-05-03 06:49:43.708] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:43.708] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:43.728] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2850081643 trigger_emit_ticks=2850457327 +[2026-05-03 06:49:43.730] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2850081643 123109165931 trigger_emit_ticks 2850457327 123109541615 +[2026-05-03 06:49:43.731] [info] [homing.cpp:266] [1885] endstop_name probe tt 1027.3254517001503 trigger_time 1027.3254517001503 move_end_print_time 1027.5784571666666 +[2026-05-03 06:49:43.731] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -432 trig_steps -431 start_pos -103646 trig_pos -104077 halt_pos -104078 +[2026-05-03 06:49:44.658] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999999151 53.99916000002605 0.023625715507420347 spos 0.02308157441069625 probing_z -0.16441842558932296 +[2026-05-03 06:49:44.659] [info] [gcode.cpp:559] [1885] probe at 149.999,53.999 is z=0.023626 +[2026-05-03 06:49:44.660] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4572301260000131 +[2026-05-03 06:49:44.661] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994114 +[2026-05-03 06:49:44.661] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988904 +[2026-05-03 06:49:44.661] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.833081574410665 +[2026-05-03 06:49:45.152] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:45.153] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:45.171] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3023458727 trigger_emit_ticks=3023843177 +[2026-05-03 06:49:45.173] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3023458727 123282543015 trigger_emit_ticks 3023843177 123282927465 +[2026-05-03 06:49:45.174] [info] [homing.cpp:266] [1885] endstop_name probe tt 1028.7703513749107 trigger_time 1028.7703513749107 move_end_print_time 1029.0230325 +[2026-05-03 06:49:45.175] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -408 trig_steps -406 start_pos -103678 trig_pos -104084 halt_pos -104086 +[2026-05-03 06:49:46.005] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999999151 53.99916000002605 0.02029263192289646 spos 0.020581574410698522 probing_z -0.18191842558933513 +[2026-05-03 06:49:46.006] [info] [gcode.cpp:559] [1885] probe at 149.999,53.999 is z=0.020293 +[2026-05-03 06:49:46.007] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3468538760000683 +[2026-05-03 06:49:46.007] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 149.9994999999151 53.99916000002605 0.026016196041116112 +[2026-05-03 06:49:46.007] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:49:46.008] [info] [probe.cpp:857] [1885] _move_next 29 probe_points.size 121 + +[2026-05-03 06:49:46.018] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998948 +[2026-05-03 06:49:46.018] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989743 +[2026-05-03 06:49:46.018] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744107847 +[2026-05-03 06:49:47.226] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:47.226] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:47.243] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3272314348 trigger_emit_ticks=3272698699 +[2026-05-03 06:49:47.245] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3272314348 123531398636 trigger_emit_ticks 3272698699 123531782987 +[2026-05-03 06:49:47.246] [info] [homing.cpp:266] [1885] endstop_name probe tt 1030.8441732430415 trigger_time 1030.8441732430415 move_end_print_time 1031.0965885833334 +[2026-05-03 06:49:47.247] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1230 trig_steps -1229 start_pos -102811 trig_pos -104040 halt_pos -104041 +[2026-05-03 06:49:48.180] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.9974599998961 53.99915999999868 0.03858326174084551 spos 0.03808157441079629 probing_z -0.07191842558921557 +[2026-05-03 06:49:48.181] [info] [gcode.cpp:559] [1885] probe at 173.997,53.999 is z=0.038583 +[2026-05-03 06:49:48.181] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1728758760000346 +[2026-05-03 06:49:48.183] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998948 +[2026-05-03 06:49:48.183] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989743 +[2026-05-03 06:49:48.183] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9255815744107704 +[2026-05-03 06:49:48.690] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:48.690] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:48.707] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3447899449 trigger_emit_ticks=3448283825 +[2026-05-03 06:49:48.709] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3447899449 123706983737 trigger_emit_ticks 3448283825 123707368113 +[2026-05-03 06:49:48.713] [info] [homing.cpp:266] [1885] endstop_name probe tt 1032.3074013171677 trigger_time 1032.3074013171677 move_end_print_time 1032.5674912499994 +[2026-05-03 06:49:48.714] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -437 trig_steps -435 start_pos -103641 trig_pos -104076 halt_pos -104078 +[2026-05-03 06:49:49.452] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.9974599998961 53.99915999999868 0.02084379211809298 spos 0.020581574410755366 probing_z -0.16191842558922975 +[2026-05-03 06:49:49.452] [info] [gcode.cpp:559] [1885] probe at 173.997,53.999 is z=0.020844 +[2026-05-03 06:49:49.453] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2714908760001435 +[2026-05-03 06:49:49.454] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998948 +[2026-05-03 06:49:49.454] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989743 +[2026-05-03 06:49:49.454] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8330815744107583 +[2026-05-03 06:49:49.946] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:49.946] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:49.960] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3598552971 trigger_emit_ticks=3598937347 +[2026-05-03 06:49:49.963] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3598552971 123857637259 trigger_emit_ticks 3598937347 123858021635 +[2026-05-03 06:49:49.966] [info] [homing.cpp:266] [1885] endstop_name probe tt 1033.5628630011568 trigger_time 1033.5628630011568 move_end_print_time 1033.8159792916667 +[2026-05-03 06:49:49.966] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -405 trig_steps -402 start_pos -103678 trig_pos -104080 halt_pos -104083 +[2026-05-03 06:49:50.910] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.9974599998961 53.99915999999868 0.015373671012253648 spos 0.015581574410759913 probing_z -0.17191842558924186 +[2026-05-03 06:49:50.910] [info] [gcode.cpp:559] [1885] probe at 173.997,53.999 is z=0.015374 +[2026-05-03 06:49:50.911] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.457832375999942 +[2026-05-03 06:49:50.911] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 173.9974599998961 53.99915999999868 0.024933574957064043 +[2026-05-03 06:49:50.912] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:49:50.913] [info] [probe.cpp:857] [1885] _move_next 30 probe_points.size 121 + +[2026-05-03 06:49:50.922] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984844 +[2026-05-03 06:49:50.922] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 143.99625999986932 +[2026-05-03 06:49:50.922] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574410878 +[2026-05-03 06:49:52.133] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:52.134] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:52.151] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3861017743 trigger_emit_ticks=3861402117 +[2026-05-03 06:49:52.164] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3861017743 trigger_emit_ticks=3861402117 +[2026-05-03 06:49:52.166] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3861017743 124120102031 trigger_emit_ticks 3861402117 124120486405 +[2026-05-03 06:49:52.167] [info] [homing.cpp:266] [1885] endstop_name probe tt 1035.750095439053 trigger_time 1035.750095439053 move_end_print_time 1036.011756014388 +[2026-05-03 06:49:52.167] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1234 trig_steps -1232 start_pos -102811 trig_pos -104043 halt_pos -104045 +[2026-05-03 06:49:52.860] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 197.99541999985888 53.99915999998956 0.03445056857383614 spos 0.03558157441085541 probing_z -0.07941842558912215 +[2026-05-03 06:49:52.860] [info] [gcode.cpp:559] [1885] probe at 197.995,53.999 is z=0.034451 +[2026-05-03 06:49:52.861] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.94750666799996 +[2026-05-03 06:49:52.862] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984844 +[2026-05-03 06:49:52.862] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 143.99625999986932 +[2026-05-03 06:49:52.862] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9155815744108641 +[2026-05-03 06:49:53.365] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:53.366] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:53.384] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4008976991 trigger_emit_ticks=4009361367 +[2026-05-03 06:49:53.386] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4008976991 124268061279 trigger_emit_ticks 4009361367 124268445655 +[2026-05-03 06:49:53.387] [info] [homing.cpp:266] [1885] endstop_name probe tt 1036.9831050251905 trigger_time 1036.9831050251905 move_end_print_time 1037.2360627083333 +[2026-05-03 06:49:53.388] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -431 trig_steps -429 start_pos -103645 trig_pos -104074 halt_pos -104076 +[2026-05-03 06:49:54.319] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 197.99541999985888 53.99915999998956 0.02050702348835501 spos 0.020581574410869052 probing_z -0.15691842558913593 +[2026-05-03 06:49:54.320] [info] [gcode.cpp:559] [1885] probe at 197.995,53.999 is z=0.020507 +[2026-05-03 06:49:54.322] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4609486250001282 +[2026-05-03 06:49:54.323] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984844 +[2026-05-03 06:49:54.323] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 143.99625999986932 +[2026-05-03 06:49:54.323] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8380815744108517 +[2026-05-03 06:49:54.814] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:54.816] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:54.830] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4182739717 trigger_emit_ticks=4183124093 +[2026-05-03 06:49:54.832] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4182739717 124441824005 trigger_emit_ticks 4183124093 124442208381 +[2026-05-03 06:49:54.833] [info] [homing.cpp:266] [1885] endstop_name probe tt 1038.4311462840765 trigger_time 1038.4311462840765 move_end_print_time 1038.6848727083334 +[2026-05-03 06:49:54.834] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -403 start_pos -103676 trig_pos -104079 halt_pos -104083 +[2026-05-03 06:49:55.764] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 197.99541999985888 53.99915999998956 0.017098132376239278 spos 0.018081574410814483 probing_z -0.16941842558914832 +[2026-05-03 06:49:55.765] [info] [gcode.cpp:559] [1885] probe at 197.995,53.999 is z=0.017098 +[2026-05-03 06:49:55.766] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4438095839998368 +[2026-05-03 06:49:55.766] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 197.99541999985888 53.99915999998956 0.02401857481281014 +[2026-05-03 06:49:55.767] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:49:55.767] [info] [probe.cpp:857] [1885] _move_next 31 probe_points.size 121 + +[2026-05-03 06:49:55.776] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989336 +[2026-05-03 06:49:55.776] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 167.99421999982297 +[2026-05-03 06:49:55.776] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574410971 +[2026-05-03 06:49:56.984] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:56.984] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:56.998] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=148307673 trigger_emit_ticks=148692047 +[2026-05-03 06:49:57.000] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 148307673 124702359257 trigger_emit_ticks 148692047 124702743631 +[2026-05-03 06:49:57.001] [info] [homing.cpp:266] [1885] endstop_name probe tt 1040.6023017019877 trigger_time 1040.6023017019877 move_end_print_time 1040.8544407916668 +[2026-05-03 06:49:57.001] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1228 trig_steps -1227 start_pos -102811 trig_pos -104038 halt_pos -104039 +[2026-05-03 06:49:57.837] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99960999985817 54.00539000003519 0.04316155618782384 spos 0.043081574410962276 probing_z -0.06691842558902872 +[2026-05-03 06:49:57.837] [info] [gcode.cpp:559] [1885] probe at 222.000,54.005 is z=0.043162 +[2026-05-03 06:49:57.838] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.070022291999976 +[2026-05-03 06:49:57.839] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989336 +[2026-05-03 06:49:57.839] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 167.99421999982295 +[2026-05-03 06:49:57.839] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9305815744109567 +[2026-05-03 06:49:58.342] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:49:58.342] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:58.345] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:49:58.362] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=311214309 trigger_emit_ticks=311598685 +[2026-05-03 06:49:58.374] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=311214309 trigger_emit_ticks=311598685 +[2026-05-03 06:49:58.376] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 311214309 124865265893 trigger_emit_ticks 311598685 124865650269 +[2026-05-03 06:49:58.377] [info] [homing.cpp:266] [1885] endstop_name probe tt 1041.9598744663936 trigger_time 1041.9598744663936 move_end_print_time 1042.2210957916661 +[2026-05-03 06:49:58.377] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -435 trig_steps -433 start_pos -103639 trig_pos -104072 halt_pos -104074 +[2026-05-03 06:49:59.118] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99960999985814 54.005390000035206 0.02911189180713672 spos 0.028081574410975918 probing_z -0.15191842558904334 +[2026-05-03 06:49:59.119] [info] [gcode.cpp:559] [1885] probe at 222.000,54.005 is z=0.029112 +[2026-05-03 06:49:59.120] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.281631250999908 +[2026-05-03 06:49:59.121] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989336 +[2026-05-03 06:49:59.121] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 167.99421999982292 +[2026-05-03 06:49:59.121] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8430815744109442 +[2026-05-03 06:49:59.614] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:49:59.628] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=463868031 trigger_emit_ticks=464252407 +[2026-05-03 06:49:59.630] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 463868031 125017919615 trigger_emit_ticks 464252407 125018303991 +[2026-05-03 06:49:59.632] [info] [homing.cpp:266] [1885] endstop_name probe tt 1043.2320052587675 trigger_time 1043.2320052587675 move_end_print_time 1043.484059 +[2026-05-03 06:49:59.633] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -405 trig_steps -404 start_pos -103674 trig_pos -104078 halt_pos -104079 +[2026-05-03 06:50:00.573] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99960999985814 54.00539000003522 0.0249934402382134 spos 0.02558157441092135 probing_z -0.16691842558905579 +[2026-05-03 06:50:00.574] [info] [gcode.cpp:559] [1885] probe at 222.000,54.005 is z=0.024993 +[2026-05-03 06:50:00.574] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4546270009998352 +[2026-05-03 06:50:00.575] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 221.9996099998581 54.0053900000352 0.03242229607772465 +[2026-05-03 06:50:00.575] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:50:00.576] [info] [probe.cpp:857] [1885] _move_next 32 probe_points.size 121 + +[2026-05-03 06:50:00.578] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:50:00.579] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:50:00.580] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.590] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.592] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.594] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.596] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.597] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.599] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.601] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.603] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.605] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.607] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.608] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.610] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.612] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.614] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.615] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.618] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.619] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.621] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.624] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.626] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.627] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.676] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.739] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.802] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.865] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.926] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:00.989] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:01.051] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:01.113] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:01.176] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:01.238] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:01.301] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:01.363] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:01.425] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:01.487] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:01.550] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:01.612] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:01.675] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:01.737] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:01.803] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:50:01.804] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999565 +[2026-05-03 06:50:01.804] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 192.00463999977654 +[2026-05-03 06:50:01.804] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 5.000581574411021 +[2026-05-03 06:50:04.879] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:04.879] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:04.896] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1095698634 trigger_emit_ticks=1096082985 +[2026-05-03 06:50:04.899] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1095698634 125649750218 trigger_emit_ticks 1096082985 125650134569 +[2026-05-03 06:50:04.900] [info] [homing.cpp:266] [1885] endstop_name probe tt 1048.4973268075973 trigger_time 1048.4973268075973 move_end_print_time 1048.7498073333334 +[2026-05-03 06:50:04.900] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -2056 trig_steps -2054 start_pos -102011 trig_pos -104065 halt_pos -104067 +[2026-05-03 06:50:05.683] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 246.00379999986652 53.99916000008997 0.015059459752278875 spos 0.01558157441104413 probing_z -0.13441842558897843 +[2026-05-03 06:50:05.684] [info] [gcode.cpp:559] [1885] probe at 246.004,53.999 is z=0.015059 +[2026-05-03 06:50:05.685] [info] [load_cell_probe.cpp:333] [1885] run_probe time 3.88164170999994 +[2026-05-03 06:50:05.686] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999565 +[2026-05-03 06:50:05.686] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 192.00463999977651 +[2026-05-03 06:50:05.686] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.860581574411009 +[2026-05-03 06:50:06.187] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:06.187] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:06.202] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1252581449 trigger_emit_ticks=1252965823 +[2026-05-03 06:50:06.203] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1252581449 125806633033 trigger_emit_ticks 1252965823 125807017407 +[2026-05-03 06:50:06.205] [info] [homing.cpp:266] [1885] endstop_name probe tt 1049.8047005664203 trigger_time 1049.8047005664203 move_end_print_time 1050.0567335833334 +[2026-05-03 06:50:06.206] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -422 trig_steps -421 start_pos -103667 trig_pos -104088 halt_pos -104089 +[2026-05-03 06:50:07.137] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 246.0037999998665 53.99916000008999 0.001076262612933948 spos 0.0005815744110009291 probing_z -0.19191842558899097 +[2026-05-03 06:50:07.138] [info] [gcode.cpp:559] [1885] probe at 246.004,53.999 is z=0.001076 +[2026-05-03 06:50:07.139] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4539125840001361 +[2026-05-03 06:50:07.140] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999565 +[2026-05-03 06:50:07.140] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 192.0046399997765 +[2026-05-03 06:50:07.140] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8055815744109976 +[2026-05-03 06:50:07.631] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:07.632] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:07.646] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1425854077 trigger_emit_ticks=1426238474 +[2026-05-03 06:50:07.649] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1425854077 125979905661 trigger_emit_ticks 1426238474 125980290058 +[2026-05-03 06:50:07.651] [info] [homing.cpp:266] [1885] endstop_name probe tt 1051.2486579319304 trigger_time 1051.2486579319304 move_end_print_time 1051.5017850833333 +[2026-05-03 06:50:07.652] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -403 start_pos -103689 trig_pos -104092 halt_pos -104095 +[2026-05-03 06:50:08.584] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 246.0037999998665 53.99916000009 -0.001146597109428743 spos -0.0019184255889967972 probing_z -0.20191842558900241 +[2026-05-03 06:50:08.585] [info] [gcode.cpp:559] [1885] probe at 246.004,53.999 is z=-0.001147 +[2026-05-03 06:50:08.586] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.446633749999819 +[2026-05-03 06:50:08.586] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 246.0037999998665 53.99916000008998 0.00499637508526136 +[2026-05-03 06:50:08.586] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:50:08.587] [info] [probe.cpp:857] [1885] _move_next 33 probe_points.size 121 + +[2026-05-03 06:50:08.596] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.0009200000196 +[2026-05-03 06:50:08.597] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 167.99421999982286 +[2026-05-03 06:50:08.597] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744111173 +[2026-05-03 06:50:09.831] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:09.832] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:09.850] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1689834175 trigger_emit_ticks=1690218551 +[2026-05-03 06:50:09.852] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1689834175 126243885759 trigger_emit_ticks 1690218551 126244270135 +[2026-05-03 06:50:09.853] [info] [homing.cpp:266] [1885] endstop_name probe tt 1053.448519630244 trigger_time 1053.448519630244 move_end_print_time 1053.7018075833332 +[2026-05-03 06:50:09.853] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1278 trig_steps -1277 start_pos -102811 trig_pos -104088 halt_pos -104089 +[2026-05-03 06:50:10.791] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.99756999992124 78.00335000009838 -0.06920461084557236 spos -0.06941842558887856 probing_z -0.1919184255888826 +[2026-05-03 06:50:10.791] [info] [gcode.cpp:559] [1885] probe at 245.998,78.003 is z=-0.069205 +[2026-05-03 06:50:10.792] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.2044103340001584 +[2026-05-03 06:50:10.794] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.0009200000196 +[2026-05-03 06:50:10.794] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 167.99421999982283 +[2026-05-03 06:50:10.794] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8055815744111056 +[2026-05-03 06:50:11.303] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:11.304] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:11.336] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1866454819 trigger_emit_ticks=1866839193 +[2026-05-03 06:50:11.338] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1866454819 126420506403 trigger_emit_ticks 1866839193 126420890777 +[2026-05-03 06:50:11.339] [info] [homing.cpp:266] [1885] endstop_name probe tt 1054.9203768364928 trigger_time 1054.9203768364928 move_end_print_time 1055.1869169166666 +[2026-05-03 06:50:11.339] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -439 trig_steps -437 start_pos -103689 trig_pos -104126 halt_pos -104128 +[2026-05-03 06:50:12.065] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.9975699999212 78.0033500000984 -0.08163920072669711 spos -0.08191842558892404 probing_z -0.28691842558889447 +[2026-05-03 06:50:12.065] [info] [gcode.cpp:559] [1885] probe at 245.998,78.003 is z=-0.081639 +[2026-05-03 06:50:12.066] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2738757090000945 +[2026-05-03 06:50:12.067] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.0009200000196 +[2026-05-03 06:50:12.067] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 167.99421999982283 +[2026-05-03 06:50:12.067] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7080815744110954 +[2026-05-03 06:50:12.559] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:12.559] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:12.573] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2017278791 trigger_emit_ticks=2017663165 +[2026-05-03 06:50:12.575] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2017278791 126571330375 trigger_emit_ticks 2017663165 126571714749 +[2026-05-03 06:50:12.576] [info] [homing.cpp:266] [1885] endstop_name probe tt 1056.1772586205136 trigger_time 1056.1772586205136 move_end_print_time 1056.4290364583333 +[2026-05-03 06:50:12.576] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -406 start_pos -103728 trig_pos -104134 halt_pos -104135 +[2026-05-03 06:50:13.506] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.9975699999212 78.0033500000984 -0.08360264151059132 spos -0.08441842558892176 probing_z -0.3069184255889047 +[2026-05-03 06:50:13.507] [info] [gcode.cpp:559] [1885] probe at 245.998,78.003 is z=-0.083603 +[2026-05-03 06:50:13.507] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4410551260000375 +[2026-05-03 06:50:13.508] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 245.9975699999212 78.0033500000984 -0.07814881769428693 +[2026-05-03 06:50:13.508] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:50:13.509] [info] [probe.cpp:857] [1885] _move_next 34 probe_points.size 121 + +[2026-05-03 06:50:13.518] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999565 +[2026-05-03 06:50:13.519] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 143.99625999986918 +[2026-05-03 06:50:13.519] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744112136 +[2026-05-03 06:50:14.749] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:14.766] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2280089563 trigger_emit_ticks=2280473939 +[2026-05-03 06:50:14.768] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2280089563 126834141147 trigger_emit_ticks 2280473939 126834525523 +[2026-05-03 06:50:14.769] [info] [homing.cpp:266] [1885] endstop_name probe tt 1058.3673742962853 trigger_time 1058.3673742962853 move_end_print_time 1058.6194947916667 +[2026-05-03 06:50:14.769] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1263 trig_steps -1261 start_pos -102811 trig_pos -104072 halt_pos -104074 +[2026-05-03 06:50:15.499] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99960999991282 78.00335000004365 -0.0430209500991294 spos -0.04191842558878989 probing_z -0.1519184255887862 +[2026-05-03 06:50:15.499] [info] [gcode.cpp:559] [1885] probe at 222.000,78.003 is z=-0.043021 +[2026-05-03 06:50:15.500] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.990281626000069 +[2026-05-03 06:50:15.501] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999565 +[2026-05-03 06:50:15.501] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 143.99625999986918 +[2026-05-03 06:50:15.501] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8430815744112011 +[2026-05-03 06:50:16.008] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:16.008] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:16.023] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2431115123 trigger_emit_ticks=2431499497 +[2026-05-03 06:50:16.025] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2431115123 126985166707 trigger_emit_ticks 2431499497 126985551081 +[2026-05-03 06:50:16.026] [info] [homing.cpp:266] [1885] endstop_name probe tt 1059.6259365801407 trigger_time 1059.6259365801407 move_end_print_time 1059.87772675 +[2026-05-03 06:50:16.026] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -437 trig_steps -436 start_pos -103674 trig_pos -104110 halt_pos -104111 +[2026-05-03 06:50:16.855] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99960999991282 78.00335000004365 -0.05685015530344337 spos -0.0569184255887194 probing_z -0.24691842558879895 +[2026-05-03 06:50:16.855] [info] [gcode.cpp:559] [1885] probe at 222.000,78.003 is z=-0.056850 +[2026-05-03 06:50:16.856] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.356258834000073 +[2026-05-03 06:50:16.857] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999565 +[2026-05-03 06:50:16.858] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 143.99625999986918 +[2026-05-03 06:50:16.858] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7505815744111909 +[2026-05-03 06:50:17.349] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:17.350] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:17.365] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2592011329 trigger_emit_ticks=2592395726 +[2026-05-03 06:50:17.368] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2592011329 127146062913 trigger_emit_ticks 2592395726 127146447310 +[2026-05-03 06:50:17.370] [info] [homing.cpp:266] [1885] endstop_name probe tt 1060.9667560689782 trigger_time 1060.9667560689782 move_end_print_time 1061.22176525 +[2026-05-03 06:50:17.370] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -405 start_pos -103711 trig_pos -104116 halt_pos -104118 +[2026-05-03 06:50:18.303] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99960999991282 78.00335000004365 -0.061188608778001 spos -0.06191842558882854 probing_z -0.26191842558880907 +[2026-05-03 06:50:18.304] [info] [gcode.cpp:559] [1885] probe at 222.000,78.003 is z=-0.061189 +[2026-05-03 06:50:18.304] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.447912125999892 +[2026-05-03 06:50:18.305] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 221.99960999991285 78.00335000004365 -0.05368657139352459 +[2026-05-03 06:50:18.305] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:50:18.306] [info] [probe.cpp:857] [1885] _move_next 35 probe_points.size 121 + +[2026-05-03 06:50:18.315] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989336 +[2026-05-03 06:50:18.315] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989727 +[2026-05-03 06:50:18.315] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.00058157441131 +[2026-05-03 06:50:19.546] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:19.547] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:19.561] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2855704909 trigger_emit_ticks=2856089283 +[2026-05-03 06:50:19.562] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2855704909 127409756493 trigger_emit_ticks 2856089283 127410140867 +[2026-05-03 06:50:19.564] [info] [homing.cpp:266] [1885] endstop_name probe tt 1063.1642308484577 trigger_time 1063.1642308484577 move_end_print_time 1063.4167684583333 +[2026-05-03 06:50:19.564] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1267 trig_steps -1266 start_pos -102811 trig_pos -104077 halt_pos -104078 +[2026-05-03 06:50:20.305] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.0016499998953 78.00334999999805 -0.05240894982090835 spos -0.051918425588667105 probing_z -0.16441842558869002 +[2026-05-03 06:50:20.305] [info] [gcode.cpp:559] [1885] probe at 198.002,78.003 is z=-0.052409 +[2026-05-03 06:50:20.306] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9995727509999597 +[2026-05-03 06:50:20.307] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989336 +[2026-05-03 06:50:20.307] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989723 +[2026-05-03 06:50:20.307] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8330815744112979 +[2026-05-03 06:50:20.816] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:20.817] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:20.850] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3007972629 trigger_emit_ticks=3008357003 +[2026-05-03 06:50:20.852] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3007972629 127562024213 trigger_emit_ticks 3008357003 127562408587 +[2026-05-03 06:50:20.853] [info] [homing.cpp:266] [1885] endstop_name probe tt 1064.4331452729405 trigger_time 1064.4331452729405 move_end_print_time 1064.6930588333328 +[2026-05-03 06:50:20.854] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -437 trig_steps -435 start_pos -103678 trig_pos -104113 halt_pos -104115 +[2026-05-03 06:50:21.579] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.00164999989528 78.00334999999806 -0.067393329162006 spos -0.0669184255887103 probing_z -0.2544184255887022 +[2026-05-03 06:50:21.579] [info] [gcode.cpp:559] [1885] probe at 198.002,78.003 is z=-0.067393 +[2026-05-03 06:50:21.582] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2755369589999646 +[2026-05-03 06:50:21.583] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989336 +[2026-05-03 06:50:21.583] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989723 +[2026-05-03 06:50:21.583] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7405815744112877 +[2026-05-03 06:50:22.074] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:22.076] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:50:22.089] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3158995399 trigger_emit_ticks=3159370399 +[2026-05-03 06:50:22.091] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3158995399 127713046983 trigger_emit_ticks 3159370399 127713421983 +[2026-05-03 06:50:22.092] [info] [homing.cpp:266] [1885] endstop_name probe tt 1065.6916067748816 trigger_time 1065.6916067748816 move_end_print_time 1065.944441625 +[2026-05-03 06:50:22.092] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -404 start_pos -103715 trig_pos -104119 halt_pos -104121 +[2026-05-03 06:50:23.024] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.00164999989528 78.00334999999806 -0.07046409780338064 spos -0.06941842558870803 probing_z -0.2694184255887123 +[2026-05-03 06:50:23.025] [info] [gcode.cpp:559] [1885] probe at 198.002,78.003 is z=-0.070464 +[2026-05-03 06:50:23.026] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4442611669999224 +[2026-05-03 06:50:23.026] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 198.00164999989525 78.00334999999806 -0.06342212559543166 +[2026-05-03 06:50:23.027] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:50:23.027] [info] [probe.cpp:857] [1885] _move_next 36 probe_points.size 121 + +[2026-05-03 06:50:23.036] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984847 +[2026-05-03 06:50:23.036] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988884 +[2026-05-03 06:50:23.036] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574411407 +[2026-05-03 06:50:24.266] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:24.267] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:24.282] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3421999023 trigger_emit_ticks=3422383397 +[2026-05-03 06:50:24.285] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3421999023 127976050607 trigger_emit_ticks 3422383397 127976434981 +[2026-05-03 06:50:24.286] [info] [homing.cpp:266] [1885] endstop_name probe tt 1067.8834034080533 trigger_time 1067.8834034080533 move_end_print_time 1068.1365955 +[2026-05-03 06:50:24.287] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1263 trig_steps -1260 start_pos -102811 trig_pos -104071 halt_pos -104074 +[2026-05-03 06:50:25.015] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.99745999986865 77.99711999997982 -0.04259795174425693 spos -0.04191842558856251 probing_z -0.14941842558859308 +[2026-05-03 06:50:25.016] [info] [gcode.cpp:559] [1885] probe at 173.997,77.997 is z=-0.042598 +[2026-05-03 06:50:25.016] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9883925009999075 +[2026-05-03 06:50:25.017] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984844 +[2026-05-03 06:50:25.018] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988881 +[2026-05-03 06:50:25.018] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8430815744113943 +[2026-05-03 06:50:25.526] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:25.527] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:25.545] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3573114705 trigger_emit_ticks=3573489705 +[2026-05-03 06:50:25.548] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3573114705 128127166289 trigger_emit_ticks 3573489705 128127541289 +[2026-05-03 06:50:25.549] [info] [homing.cpp:266] [1885] endstop_name probe tt 1069.1426368051793 trigger_time 1069.1426368051793 move_end_print_time 1069.4029034166663 +[2026-05-03 06:50:25.549] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -438 trig_steps -434 start_pos -103674 trig_pos -104108 halt_pos -104112 +[2026-05-03 06:50:26.271] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.99745999986862 77.99711999997982 -0.05539174940621247 spos -0.054418425588551145 probing_z -0.24191842558860566 +[2026-05-03 06:50:26.271] [info] [gcode.cpp:559] [1885] probe at 173.997,77.997 is z=-0.055392 +[2026-05-03 06:50:26.272] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2552530010000282 +[2026-05-03 06:50:26.273] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984844 +[2026-05-03 06:50:26.273] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988881 +[2026-05-03 06:50:26.273] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7480815744113841 +[2026-05-03 06:50:26.765] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:26.765] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:26.780] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3722024309 trigger_emit_ticks=3722408685 +[2026-05-03 06:50:26.782] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3722024309 128276075893 trigger_emit_ticks 3722408685 128276460269 +[2026-05-03 06:50:26.783] [info] [homing.cpp:266] [1885] endstop_name probe tt 1070.3836423691603 trigger_time 1070.3836423691603 move_end_print_time 1070.6356049583333 +[2026-05-03 06:50:26.784] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -405 start_pos -103712 trig_pos -104117 halt_pos -104118 +[2026-05-03 06:50:27.616] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.99745999986862 77.99711999997982 -0.05717115576647877 spos -0.056918425588605714 probing_z -0.26441842558861584 +[2026-05-03 06:50:27.617] [info] [gcode.cpp:559] [1885] probe at 173.997,77.997 is z=-0.057171 +[2026-05-03 06:50:27.617] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3455796669998108 +[2026-05-03 06:50:27.618] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 173.99745999986862 77.99711999997982 -0.051720285638982726 +[2026-05-03 06:50:27.618] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:50:27.619] [info] [probe.cpp:857] [1885] _move_next 37 probe_points.size 121 + +[2026-05-03 06:50:27.627] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998948 +[2026-05-03 06:50:27.628] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988042 +[2026-05-03 06:50:27.628] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574411503 +[2026-05-03 06:50:28.863] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:28.878] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3973620439 trigger_emit_ticks=3974004813 +[2026-05-03 06:50:28.879] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3973620439 128527672023 trigger_emit_ticks 3974004813 128528056397 +[2026-05-03 06:50:28.881] [info] [homing.cpp:266] [1885] endstop_name probe tt 1072.4803005501149 trigger_time 1072.4803005501149 move_end_print_time 1072.7329293333332 +[2026-05-03 06:50:28.881] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1273 trig_steps -1272 start_pos -102811 trig_pos -104083 halt_pos -104084 +[2026-05-03 06:50:29.616] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999998876 77.99712000000719 -0.056522905472134316 spos -0.05691842558849203 probing_z -0.17941842558849697 +[2026-05-03 06:50:29.616] [info] [gcode.cpp:559] [1885] probe at 149.999,77.997 is z=-0.056523 +[2026-05-03 06:50:29.618] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.998186374999932 +[2026-05-03 06:50:29.619] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998948 +[2026-05-03 06:50:29.619] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988042 +[2026-05-03 06:50:29.619] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8180815744114913 +[2026-05-03 06:50:30.126] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:30.126] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:30.142] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4125307009 trigger_emit_ticks=4125691385 +[2026-05-03 06:50:30.144] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4125307009 128679358593 trigger_emit_ticks 4125691385 128679742969 +[2026-05-03 06:50:30.145] [info] [homing.cpp:266] [1885] endstop_name probe tt 1073.7443716445318 trigger_time 1073.7443716445318 move_end_print_time 1074.003442333333 +[2026-05-03 06:50:30.146] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -438 trig_steps -437 start_pos -103684 trig_pos -104121 halt_pos -104122 +[2026-05-03 06:50:30.870] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999998876 77.99712000000719 -0.07313076128823764 spos -0.07191842558853523 probing_z -0.2744184255885087 +[2026-05-03 06:50:30.871] [info] [gcode.cpp:559] [1885] probe at 149.999,77.997 is z=-0.073131 +[2026-05-03 06:50:30.872] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2538878339998973 +[2026-05-03 06:50:30.873] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998948 +[2026-05-03 06:50:30.873] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988042 +[2026-05-03 06:50:30.873] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7230815744114811 +[2026-05-03 06:50:31.365] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:31.365] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:31.389] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=4274122211 +[2026-05-03 06:50:31.403] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=4274122211 +[2026-05-03 06:50:31.426] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=4274122211 +[2026-05-03 06:50:31.427] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 128849018880 trigger_emit_ticks 4274122211 128828173795 +[2026-05-03 06:50:31.428] [info] [homing.cpp:266] [1885] endstop_name probe tt 1074.981310591031 trigger_time 1074.981310591031 move_end_print_time 1075.2359985833334 +[2026-05-03 06:50:31.428] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -403 start_pos -103722 trig_pos -104125 halt_pos -104129 +[2026-05-03 06:50:32.319] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999998876 77.99712000000719 -0.0749498198064153 spos -0.07441842558853295 probing_z -0.28441842558851893 +[2026-05-03 06:50:32.319] [info] [gcode.cpp:559] [1885] probe at 149.999,77.997 is z=-0.074950 +[2026-05-03 06:50:32.321] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4487405840000065 +[2026-05-03 06:50:32.321] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 149.9994999998876 77.99712000000719 -0.06820116218892909 +[2026-05-03 06:50:32.321] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:50:32.322] [info] [probe.cpp:857] [1885] _move_next 38 probe_points.size 121 + +[2026-05-03 06:50:32.330] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994114 +[2026-05-03 06:50:32.330] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.00441999987203 +[2026-05-03 06:50:32.330] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744115996 +[2026-05-03 06:50:33.560] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:33.561] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:33.575] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=242463634 trigger_emit_ticks=242847985 +[2026-05-03 06:50:33.577] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 242463634 129091482514 trigger_emit_ticks 242847985 129091866865 +[2026-05-03 06:50:33.578] [info] [homing.cpp:266] [1885] endstop_name probe tt 1077.1787809852005 trigger_time 1077.1787809852005 move_end_print_time 1077.430759625 +[2026-05-03 06:50:33.578] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1260 trig_steps -1259 start_pos -102811 trig_pos -104070 halt_pos -104071 +[2026-05-03 06:50:34.308] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999990658 77.99712000003456 -0.034379578673423755 spos -0.034418425588398804 probing_z -0.1469184255884004 +[2026-05-03 06:50:34.308] [info] [gcode.cpp:559] [1885] probe at 126.002,77.997 is z=-0.034380 +[2026-05-03 06:50:34.309] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9863131259999136 +[2026-05-03 06:50:34.310] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994114 +[2026-05-03 06:50:34.310] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.00441999987203 +[2026-05-03 06:50:34.310] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8505815744115872 +[2026-05-03 06:50:34.823] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:34.824] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:34.825] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:50:34.840] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=393765267 trigger_emit_ticks=394140267 +[2026-05-03 06:50:34.855] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 393765267 129242784147 trigger_emit_ticks 394140267 129243159147 +[2026-05-03 06:50:34.856] [info] [homing.cpp:266] [1885] endstop_name probe tt 1078.4395667625538 trigger_time 1078.4395667625538 move_end_print_time 1078.6957491666662 +[2026-05-03 06:50:34.856] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -447 trig_steps -443 start_pos -103671 trig_pos -104114 halt_pos -104118 +[2026-05-03 06:50:35.584] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999990658 77.99712000003456 -0.0494481219092566 spos -0.04941842558838516 probing_z -0.2569184255884127 +[2026-05-03 06:50:35.584] [info] [gcode.cpp:559] [1885] probe at 126.002,77.997 is z=-0.049448 +[2026-05-03 06:50:35.585] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2760693340001126 +[2026-05-03 06:50:35.586] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994114 +[2026-05-03 06:50:35.586] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.00441999987203 +[2026-05-03 06:50:35.587] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7330815744115771 +[2026-05-03 06:50:36.075] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:36.075] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:36.090] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=544198367 trigger_emit_ticks=544582741 +[2026-05-03 06:50:36.092] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 544198367 129393217247 trigger_emit_ticks 544582741 129393601621 +[2026-05-03 06:50:36.093] [info] [homing.cpp:266] [1885] endstop_name probe tt 1079.6932705208367 trigger_time 1079.6932705208367 move_end_print_time 1079.945275375 +[2026-05-03 06:50:36.093] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -399 trig_steps -398 start_pos -103718 trig_pos -104116 halt_pos -104117 +[2026-05-03 06:50:36.928] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999990658 77.99712000003456 -0.05042356366969589 spos -0.04941842558838516 probing_z -0.26191842558842293 +[2026-05-03 06:50:36.928] [info] [gcode.cpp:559] [1885] probe at 126.002,77.997 is z=-0.050424 +[2026-05-03 06:50:36.929] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3435018339998805 +[2026-05-03 06:50:36.929] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 126.00153999990658 77.99712000003456 -0.04475042141745875 +[2026-05-03 06:50:36.930] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:50:36.930] [info] [probe.cpp:857] [1885] _move_next 39 probe_points.size 121 + +[2026-05-03 06:50:36.932] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:50:36.933] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:50:36.934] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.943] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.945] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.947] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.948] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.950] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.952] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.953] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.955] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.956] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.959] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.960] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.962] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.964] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.965] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.967] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.968] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.970] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.972] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.973] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.975] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:36.976] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:37.036] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:37.098] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:37.160] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:37.222] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:37.285] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:37.356] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:37.409] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:37.472] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:37.535] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:37.597] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:37.659] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:37.721] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:37.784] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:37.856] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:37.909] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:37.971] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:38.034] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:38.095] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:50:38.158] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:50:38.159] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.0006999999875 +[2026-05-03 06:50:38.159] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.9939999998682 +[2026-05-03 06:50:38.159] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 5.000581574411654 +[2026-05-03 06:50:40.159] [info] [heaters.cpp:405] [1955] __func__:temperature_callback,heater_name:heater_bed,read_time:1083.77800000038,last_temp:59.82678563877397,temp:59.82678563877397,target_temp:60,smoothed_temp:59.85789754565344 +[2026-05-03 06:50:41.249] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:41.249] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:41.264] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1164956999 trigger_emit_ticks=1165331999 +[2026-05-03 06:50:41.266] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1164956999 130013975879 trigger_emit_ticks 1165331999 130014350879 +[2026-05-03 06:50:41.268] [info] [homing.cpp:266] [1885] endstop_name probe tt 1084.8662529629569 trigger_time 1084.8662529629569 move_end_print_time 1085.1194703333333 +[2026-05-03 06:50:41.268] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -2078 trig_steps -2075 start_pos -102011 trig_pos -104086 halt_pos -104089 +[2026-05-03 06:50:42.053] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999992785 78.00335000005964 -0.0304758561704421 spos -0.02941842558834651 probing_z -0.18691842558834626 +[2026-05-03 06:50:42.053] [info] [gcode.cpp:559] [1885] probe at 101.997,78.003 is z=-0.030476 +[2026-05-03 06:50:42.054] [info] [load_cell_probe.cpp:333] [1885] run_probe time 3.8961469179998858 +[2026-05-03 06:50:42.055] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.0006999999875 +[2026-05-03 06:50:42.055] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.99399999986821 +[2026-05-03 06:50:42.055] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.805581574411642 +[2026-05-03 06:50:42.557] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:42.557] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:42.574] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1322012488 trigger_emit_ticks=1322396841 +[2026-05-03 06:50:42.576] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1322012488 130171031368 trigger_emit_ticks 1322396841 130171415721 +[2026-05-03 06:50:42.577] [info] [homing.cpp:266] [1885] endstop_name probe tt 1086.1751448603018 trigger_time 1086.1751448603018 move_end_print_time 1086.4271860833333 +[2026-05-03 06:50:42.577] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -426 trig_steps -425 start_pos -103689 trig_pos -104114 halt_pos -104115 +[2026-05-03 06:50:42.812] [info] [heaters.cpp:405] [1963] __func__:temperature_callback,heater_name:extruder,read_time:1086.430699888195,last_temp:140.48397105266048,temp:140.48397105266048,target_temp:140,smoothed_temp:140.180924723702 +[2026-05-03 06:50:43.405] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999992785 78.00335000005964 -0.04426277319865454 spos -0.044418425588332866 probing_z -0.256918425588358 +[2026-05-03 06:50:43.406] [info] [gcode.cpp:559] [1885] probe at 101.997,78.003 is z=-0.044263 +[2026-05-03 06:50:43.406] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3519457500001408 +[2026-05-03 06:50:43.407] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.0006999999875 +[2026-05-03 06:50:43.407] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.99399999986821 +[2026-05-03 06:50:43.408] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7405815744116319 +[2026-05-03 06:50:43.896] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:43.897] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:43.898] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:50:43.911] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1482614735 trigger_emit_ticks=1482989737 +[2026-05-03 06:50:43.913] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1482614735 130331633615 trigger_emit_ticks 1482989737 130332008617 +[2026-05-03 06:50:43.914] [info] [homing.cpp:266] [1885] endstop_name probe tt 1087.5134375623659 trigger_time 1087.5134375623659 move_end_print_time 1087.766136625 +[2026-05-03 06:50:43.914] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -398 start_pos -103715 trig_pos -104113 halt_pos -104115 +[2026-05-03 06:50:44.841] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999992785 78.00335000005964 -0.04522195426492889 spos -0.044418425588332866 probing_z -0.25441842558836814 +[2026-05-03 06:50:44.841] [info] [gcode.cpp:559] [1885] probe at 101.997,78.003 is z=-0.045222 +[2026-05-03 06:50:44.842] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.435518416999912 +[2026-05-03 06:50:44.842] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 101.99734999992785 78.00335000005964 -0.039986861211341845 +[2026-05-03 06:50:44.843] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:50:44.843] [info] [probe.cpp:857] [1885] _move_next 40 probe_points.size 121 + +[2026-05-03 06:50:44.852] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.00274000003384 +[2026-05-03 06:50:44.853] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.00396000013077934 +[2026-05-03 06:50:44.853] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744117514 +[2026-05-03 06:50:46.073] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:46.074] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:46.092] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1743690989 trigger_emit_ticks=1744065989 +[2026-05-03 06:50:46.093] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1743690989 130592709869 trigger_emit_ticks 1744065989 130593084869 +[2026-05-03 06:50:46.094] [info] [homing.cpp:266] [1885] endstop_name probe tt 1089.689102243047 trigger_time 1089.689102243047 move_end_print_time 1089.9464171213428 +[2026-05-03 06:50:46.095] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1244 trig_steps -1241 start_pos -102811 trig_pos -104052 halt_pos -104055 +[2026-05-03 06:50:46.825] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999995153 78.0033500000823 0.024085799926513413 spos 0.02308157441171943 probing_z -0.1019184255882486 +[2026-05-03 06:50:46.825] [info] [gcode.cpp:559] [1885] probe at 77.999,78.003 is z=0.024086 +[2026-05-03 06:50:46.826] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9820227089999207 +[2026-05-03 06:50:46.827] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.0027400000338 +[2026-05-03 06:50:46.827] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130774687 +[2026-05-03 06:50:46.827] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8905815744117382 +[2026-05-03 06:50:47.334] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:47.335] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:47.354] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1895167939 trigger_emit_ticks=1895552338 +[2026-05-03 06:50:47.356] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1895167939 130744186819 trigger_emit_ticks 1895552338 130744571218 +[2026-05-03 06:50:47.357] [info] [homing.cpp:266] [1885] endstop_name probe tt 1090.9515051562496 trigger_time 1090.9515051562496 move_end_print_time 1091.2124674166662 +[2026-05-03 06:50:47.358] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -435 trig_steps -433 start_pos -103655 trig_pos -104088 halt_pos -104090 +[2026-05-03 06:50:48.093] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999995152 78.00335000008229 -0.0012930259180638781 spos -0.0019184255882578327 probing_z -0.19191842558826178 +[2026-05-03 06:50:48.094] [info] [gcode.cpp:559] [1885] probe at 77.999,78.003 is z=-0.001293 +[2026-05-03 06:50:48.095] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2686792930001047 +[2026-05-03 06:50:48.096] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.0027400000338 +[2026-05-03 06:50:48.096] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130774688 +[2026-05-03 06:50:48.096] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8030815744117267 +[2026-05-03 06:50:48.588] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:48.588] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:48.603] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2045789581 trigger_emit_ticks=2046173957 +[2026-05-03 06:50:48.605] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2045789581 130894808461 trigger_emit_ticks 2046173957 130895192837 +[2026-05-03 06:50:48.606] [info] [homing.cpp:266] [1885] endstop_name probe tt 1092.2067017775335 trigger_time 1092.2067017775335 move_end_print_time 1092.459094625 +[2026-05-03 06:50:48.607] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -408 trig_steps -407 start_pos -103690 trig_pos -104097 halt_pos -104098 +[2026-05-03 06:50:49.547] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999995152 78.00335000008229 -0.0031770408640655334 spos -0.004418425588312402 probing_z -0.2144184255882734 +[2026-05-03 06:50:49.547] [info] [gcode.cpp:559] [1885] probe at 77.999,78.003 is z=-0.003177 +[2026-05-03 06:50:49.548] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4531059180001193 +[2026-05-03 06:50:49.548] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 77.99938999995152 78.00335000008229 0.006538577714794667 +[2026-05-03 06:50:49.549] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:50:49.549] [info] [probe.cpp:857] [1885] _move_next 41 probe_points.size 121 + +[2026-05-03 06:50:49.558] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.00478000008016 +[2026-05-03 06:50:49.558] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.00192000012976 +[2026-05-03 06:50:49.558] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574411846 +[2026-05-03 06:50:50.770] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:50.772] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:50.772] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:50:50.788] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2307625089 trigger_emit_ticks=2308009463 +[2026-05-03 06:50:50.790] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2307625089 131156643969 trigger_emit_ticks 2308009463 131157028343 +[2026-05-03 06:50:50.791] [info] [homing.cpp:266] [1885] endstop_name probe tt 1094.388693198376 trigger_time 1094.388693198376 move_end_print_time 1094.64106 +[2026-05-03 06:50:50.791] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1232 trig_steps -1231 start_pos -102811 trig_pos -104042 halt_pos -104043 +[2026-05-03 06:50:51.727] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.0014299999752 78.00335000010496 0.035131708308992184 spos 0.03558157441187859 probing_z -0.0769184255881541 +[2026-05-03 06:50:51.727] [info] [gcode.cpp:559] [1885] probe at 54.001,78.003 is z=0.035132 +[2026-05-03 06:50:51.728] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.177700251000033 +[2026-05-03 06:50:51.729] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.00478000008016 +[2026-05-03 06:50:51.729] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129758 +[2026-05-03 06:50:51.729] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.920581574411832 +[2026-05-03 06:50:52.240] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:52.255] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2483755218 trigger_emit_ticks=2484139571 +[2026-05-03 06:50:52.257] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2483755218 131332774098 trigger_emit_ticks 2484139571 131333158451 +[2026-05-03 06:50:52.258] [info] [homing.cpp:266] [1885] endstop_name probe tt 1095.8564641833561 trigger_time 1095.8564641833561 move_end_print_time 1096.1138541249995 +[2026-05-03 06:50:52.259] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -444 trig_steps -440 start_pos -103643 trig_pos -104083 halt_pos -104087 +[2026-05-03 06:50:52.999] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.0014299999752 78.00335000010496 0.01811113415601187 spos 0.018081574411894508 probing_z -0.17941842558816812 +[2026-05-03 06:50:52.999] [info] [gcode.cpp:559] [1885] probe at 54.001,78.003 is z=0.018111 +[2026-05-03 06:50:53.000] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2718920419999904 +[2026-05-03 06:50:53.001] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.00478000008016 +[2026-05-03 06:50:53.001] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129758 +[2026-05-03 06:50:53.001] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8105815744118203 +[2026-05-03 06:50:53.493] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:53.494] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:53.509] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2634380179 trigger_emit_ticks=2634764553 +[2026-05-03 06:50:53.513] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2634380179 131483399059 trigger_emit_ticks 2634764553 131483783433 +[2026-05-03 06:50:53.514] [info] [homing.cpp:266] [1885] endstop_name probe tt 1097.1116892749696 trigger_time 1097.1116892749696 move_end_print_time 1097.3637696666667 +[2026-05-03 06:50:53.514] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -406 start_pos -103687 trig_pos -104093 halt_pos -104094 +[2026-05-03 06:50:54.456] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.0014299999752 78.00335000010496 0.016760086501475008 spos 0.015581574411839938 probing_z -0.2044184255881798 +[2026-05-03 06:50:54.456] [info] [gcode.cpp:559] [1885] probe at 54.001,78.003 is z=0.016760 +[2026-05-03 06:50:54.457] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4574141670000245 +[2026-05-03 06:50:54.458] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 54.00142999997521 78.00335000010496 0.02333430965549302 +[2026-05-03 06:50:54.458] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:50:54.459] [info] [probe.cpp:857] [1885] _move_next 42 probe_points.size 121 + +[2026-05-03 06:50:54.469] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 107.99436000008089 +[2026-05-03 06:50:54.469] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013359 +[2026-05-03 06:50:54.469] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744119397 +[2026-05-03 06:50:55.679] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:55.679] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:55.695] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2896610061 trigger_emit_ticks=2896994437 +[2026-05-03 06:50:55.697] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2896610061 131745628941 trigger_emit_ticks 2896994437 131746013317 +[2026-05-03 06:50:55.698] [info] [homing.cpp:266] [1885] endstop_name probe tt 1099.2969670807402 trigger_time 1099.2969670807402 move_end_print_time 1099.54948225 +[2026-05-03 06:50:55.698] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1232 trig_steps -1230 start_pos -102811 trig_pos -104041 halt_pos -104043 +[2026-05-03 06:50:56.533] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.99723999997365 77.99712000010723 0.03913793618537479 spos 0.03808157441193316 probing_z -0.07441842558806044 +[2026-05-03 06:50:56.533] [info] [gcode.cpp:559] [1885] probe at 29.997,77.997 is z=0.039138 +[2026-05-03 06:50:56.535] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.075736126000038 +[2026-05-03 06:50:56.536] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 107.99436000008087 +[2026-05-03 06:50:56.536] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013359 +[2026-05-03 06:50:56.537] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9205815744119257 +[2026-05-03 06:50:57.042] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:57.043] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:50:57.056] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3060170077 trigger_emit_ticks=3060554453 +[2026-05-03 06:50:57.058] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3060170077 131909188957 trigger_emit_ticks 3060554453 131909573333 +[2026-05-03 06:50:57.059] [info] [homing.cpp:266] [1885] endstop_name probe tt 1100.6599853549847 trigger_time 1100.6599853549847 move_end_print_time 1100.9183605416663 +[2026-05-03 06:50:57.059] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -440 trig_steps -438 start_pos -103643 trig_pos -104081 halt_pos -104083 +[2026-05-03 06:50:57.788] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999973644 77.99712000010723 0.02214505374841716 spos 0.02308157441188996 probing_z -0.1744184255880743 +[2026-05-03 06:50:57.789] [info] [gcode.cpp:559] [1885] probe at 29.997,77.997 is z=0.022145 +[2026-05-03 06:50:57.789] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2538977920000889 +[2026-05-03 06:50:57.790] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 107.99436000008087 +[2026-05-03 06:50:57.791] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013359 +[2026-05-03 06:50:57.791] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8205815744119138 +[2026-05-03 06:50:58.282] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:50:58.298] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3209061769 trigger_emit_ticks=3209446143 +[2026-05-03 06:50:58.300] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3209061769 132058080649 trigger_emit_ticks 3209446143 132058465023 +[2026-05-03 06:50:58.302] [info] [homing.cpp:266] [1885] endstop_name probe tt 1101.900768013442 trigger_time 1101.900768013442 move_end_print_time 1102.1527480416667 +[2026-05-03 06:50:58.302] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -406 start_pos -103683 trig_pos -104089 halt_pos -104090 +[2026-05-03 06:50:59.232] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999973644 77.99712000010723 0.020943829772719386 spos 0.020581574411949077 probing_z -0.1944184255880863 +[2026-05-03 06:50:59.232] [info] [gcode.cpp:559] [1885] probe at 29.997,77.997 is z=0.020944 +[2026-05-03 06:50:59.233] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.443597834000002 +[2026-05-03 06:50:59.233] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 29.997239999973647 77.99712000010723 0.027408939902170443 +[2026-05-03 06:50:59.234] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:50:59.234] [info] [probe.cpp:857] [1885] _move_next 43 probe_points.size 121 + +[2026-05-03 06:50:59.244] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 83.99640000007248 +[2026-05-03 06:50:59.245] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014198 +[2026-05-03 06:50:59.245] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744120334 +[2026-05-03 06:51:00.408] [error] [tmc_uart.cpp:295] [1885] _decode_read error #0 +[2026-05-03 06:51:00.458] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:00.458] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:00.474] [warning] [tmc.cpp:887] [1885] Stepper stepper_z phase change (was 3 now 2) +[2026-05-03 06:51:00.476] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3470019547 trigger_emit_ticks=3470394547 +[2026-05-03 06:51:00.477] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3470019547 132319038427 trigger_emit_ticks 3470394547 132319413427 +[2026-05-03 06:51:00.478] [info] [homing.cpp:266] [1885] endstop_name probe tt 1104.075369550285 trigger_time 1104.075369550285 move_end_print_time 1104.3346363394342 +[2026-05-03 06:51:00.479] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1238 trig_steps -1237 start_pos -102811 trig_pos -104048 halt_pos -104049 +[2026-05-03 06:51:01.213] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999965253 77.99712000010723 0.022987467331802264 spos 0.02308157441206049 probing_z -0.09191842558796681 +[2026-05-03 06:51:01.214] [info] [gcode.cpp:559] [1885] probe at 5.999,77.997 is z=0.022987 +[2026-05-03 06:51:01.214] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9793770849998964 +[2026-05-03 06:51:01.216] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 83.99640000007248 +[2026-05-03 06:51:01.216] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014198 +[2026-05-03 06:51:01.216] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9055815744120196 +[2026-05-03 06:51:01.730] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:01.730] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:01.747] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3622732201 trigger_emit_ticks=3623116575 +[2026-05-03 06:51:01.763] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3622732201 trigger_emit_ticks=3623116575 +[2026-05-03 06:51:01.766] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3622732201 132471751081 trigger_emit_ticks 3623116575 132472135455 +[2026-05-03 06:51:01.766] [info] [homing.cpp:266] [1885] endstop_name probe tt 1105.3480708241218 trigger_time 1105.3480708241218 move_end_print_time 1105.6013421249995 +[2026-05-03 06:51:01.767] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -450 trig_steps -448 start_pos -103649 trig_pos -104097 halt_pos -104099 +[2026-05-03 06:51:02.648] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999965253 77.99712000010723 0.00784206703512838 spos 0.00808157441201729 probing_z -0.21441842558798052 +[2026-05-03 06:51:02.648] [info] [gcode.cpp:559] [1885] probe at 5.999,77.997 is z=0.007842 +[2026-05-03 06:51:02.649] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4348885419999533 +[2026-05-03 06:51:02.651] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 83.99640000007248 +[2026-05-03 06:51:02.651] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014198 +[2026-05-03 06:51:02.651] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7805815744120087 +[2026-05-03 06:51:03.141] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:03.156] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3792135591 trigger_emit_ticks=3792519988 +[2026-05-03 06:51:03.158] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3792135591 132641154471 trigger_emit_ticks 3792519988 132641538868 +[2026-05-03 06:51:03.160] [info] [homing.cpp:266] [1885] endstop_name probe tt 1106.759784623381 trigger_time 1106.759784623381 move_end_print_time 1107.0118775 +[2026-05-03 06:51:03.160] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -409 trig_steps -408 start_pos -103699 trig_pos -104107 halt_pos -104108 +[2026-05-03 06:51:03.989] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999965253 77.99712000010723 0.004036903204178627 spos 0.003081574412021837 probing_z -0.2394184255879913 +[2026-05-03 06:51:03.989] [info] [gcode.cpp:559] [1885] probe at 5.999,77.997 is z=0.004037 +[2026-05-03 06:51:03.990] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3402923759999794 +[2026-05-03 06:51:03.990] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 5.999279999965253 77.99712000010723 0.011622145857036423 +[2026-05-03 06:51:03.991] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:51:03.991] [info] [probe.cpp:857] [1885] _move_next 44 probe_points.size 121 + +[2026-05-03 06:51:04.000] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 107.99436000008087 +[2026-05-03 06:51:04.000] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015037 +[2026-05-03 06:51:04.000] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744121285 +[2026-05-03 06:51:05.221] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:05.222] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:05.236] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4041693571 trigger_emit_ticks=4042077945 +[2026-05-03 06:51:05.238] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4041693571 132890712451 trigger_emit_ticks 4042077945 132891096825 +[2026-05-03 06:51:05.239] [info] [homing.cpp:266] [1885] endstop_name probe tt 1108.8394631104538 trigger_time 1108.8394631104538 move_end_print_time 1109.093891495888 +[2026-05-03 06:51:05.239] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1248 trig_steps -1246 start_pos -102811 trig_pos -104057 halt_pos -104059 +[2026-05-03 06:51:05.975] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999965253 101.99508000011562 0.02682082480613837 spos 0.02558157441211506 probing_z -0.11441842558787174 +[2026-05-03 06:51:05.976] [info] [gcode.cpp:559] [1885] probe at 5.999,101.995 is z=0.026821 +[2026-05-03 06:51:05.977] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.984618667000177 +[2026-05-03 06:51:05.978] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 107.99436000008087 +[2026-05-03 06:51:05.978] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015037 +[2026-05-03 06:51:05.978] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8805815744121153 +[2026-05-03 06:51:06.493] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:06.493] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:06.510] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4194318191 trigger_emit_ticks=4194702565 +[2026-05-03 06:51:06.512] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4194318191 133043337071 trigger_emit_ticks 4194702565 133043721445 +[2026-05-03 06:51:06.513] [info] [homing.cpp:266] [1885] endstop_name probe tt 1110.1113530155 trigger_time 1110.1113530155 move_end_print_time 1110.3649715833333 +[2026-05-03 06:51:06.513] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -452 trig_steps -451 start_pos -103659 trig_pos -104110 halt_pos -104111 +[2026-05-03 06:51:07.240] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999965253 101.99508000011562 -0.0017661526987944043 spos -0.0019184255878599288 probing_z -0.24691842558788468 +[2026-05-03 06:51:07.241] [info] [gcode.cpp:559] [1885] probe at 5.999,101.995 is z=-0.001766 +[2026-05-03 06:51:07.241] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.264386168000101 +[2026-05-03 06:51:07.242] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 107.99436000008087 +[2026-05-03 06:51:07.243] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015037 +[2026-05-03 06:51:07.243] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7505815744121049 +[2026-05-03 06:51:07.734] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:07.735] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:07.749] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=48344877 trigger_emit_ticks=48729253 +[2026-05-03 06:51:07.756] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 48344877 133192331053 trigger_emit_ticks 48729253 133192715429 +[2026-05-03 06:51:07.757] [info] [homing.cpp:266] [1885] endstop_name probe tt 1111.352985485323 trigger_time 1111.352985485323 move_end_print_time 1111.6052312916668 +[2026-05-03 06:51:07.758] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -408 trig_steps -406 start_pos -103711 trig_pos -104117 halt_pos -104119 +[2026-05-03 06:51:08.687] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999965253 101.99508000011562 -0.005913485364575227 spos -0.006918425587912225 probing_z -0.2644184255878952 +[2026-05-03 06:51:08.687] [info] [gcode.cpp:559] [1885] probe at 5.999,101.995 is z=-0.005913 +[2026-05-03 06:51:08.688] [error] [load_cell_probe.cpp:304] [1885] max_value 0.02682082480613837 min_value -0.005913485364575227 range 0.0327343101707136 +[2026-05-03 06:51:08.688] [error] [load_cell_probe.cpp:312] [1885] retries 0 samples_retries 20 +[2026-05-03 06:51:08.688] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.446898499999861 +[2026-05-03 06:51:08.690] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 107.99436000008087 +[2026-05-03 06:51:08.690] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015037 +[2026-05-03 06:51:08.690] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.7305815744120734 +[2026-05-03 06:51:09.530] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:09.532] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:09.548] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=263784579 trigger_emit_ticks=264168953 +[2026-05-03 06:51:09.549] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 263784579 133407770755 trigger_emit_ticks 264168953 133408155129 +[2026-05-03 06:51:09.550] [info] [homing.cpp:266] [1885] endstop_name probe tt 1113.1483399591466 trigger_time 1113.1483399591466 move_end_print_time 1113.4021624166667 +[2026-05-03 06:51:09.550] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -751 trig_steps -750 start_pos -103319 trig_pos -104069 halt_pos -104070 +[2026-05-03 06:51:10.230] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999965253 101.99508000011562 0.010661800977906505 spos 0.010581574412128703 probing_z -0.1444184255879266 +[2026-05-03 06:51:10.231] [info] [gcode.cpp:559] [1885] probe at 5.999,101.995 is z=0.010662 +[2026-05-03 06:51:10.231] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.542946251000103 +[2026-05-03 06:51:10.232] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 5.999279999965253 101.9950800001156 0.0009940543048456245 +[2026-05-03 06:51:10.232] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:51:10.233] [info] [probe.cpp:857] [1885] _move_next 45 probe_points.size 121 + +[2026-05-03 06:51:10.243] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.00478000008013 +[2026-05-03 06:51:10.243] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014198 +[2026-05-03 06:51:10.243] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574412193 +[2026-05-03 06:51:11.454] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:11.454] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:11.468] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=494640737 trigger_emit_ticks=495025134 +[2026-05-03 06:51:11.470] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 494640737 133638626913 trigger_emit_ticks 495025134 133639011310 +[2026-05-03 06:51:11.473] [info] [homing.cpp:266] [1885] endstop_name probe tt 1115.0721677568574 trigger_time 1115.0721677568574 move_end_print_time 1115.3307108540464 +[2026-05-03 06:51:11.473] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1239 trig_steps -1238 start_pos -102811 trig_pos -104049 halt_pos -104050 +[2026-05-03 06:51:12.203] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 30.003469999969077 102.00131000011106 0.026060876775020808 spos 0.025581574412171904 probing_z -0.09441842558780733 +[2026-05-03 06:51:12.203] [info] [gcode.cpp:559] [1885] probe at 30.003,102.001 is z=0.026061 +[2026-05-03 06:51:12.204] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9702318760000708 +[2026-05-03 06:51:12.205] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.00478000008013 +[2026-05-03 06:51:12.205] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014199 +[2026-05-03 06:51:12.205] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.9030815744121791 +[2026-05-03 06:51:12.719] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:12.720] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:12.735] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=646321535 trigger_emit_ticks=646705909 +[2026-05-03 06:51:12.736] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 646321535 133790307711 trigger_emit_ticks 646705909 133790692085 +[2026-05-03 06:51:12.737] [info] [homing.cpp:266] [1885] endstop_name probe tt 1116.336191659592 trigger_time 1116.336191659592 move_end_print_time 1116.590762875 +[2026-05-03 06:51:12.738] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -449 trig_steps -447 start_pos -103650 trig_pos -104097 halt_pos -104099 +[2026-05-03 06:51:13.473] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 30.00346999996907 102.00131000011106 0.00778570990414465 spos 0.00808157441218782 probing_z -0.21441842558782087 +[2026-05-03 06:51:13.473] [info] [gcode.cpp:559] [1885] probe at 30.003,102.001 is z=0.007786 +[2026-05-03 06:51:13.474] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2700292090000858 +[2026-05-03 06:51:13.475] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:51:13.476] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:51:13.477] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.479] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.481] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.483] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.485] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.487] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.488] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.490] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.492] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.493] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.495] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.496] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.498] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.499] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.501] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.503] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.504] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.506] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.507] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.509] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.511] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.513] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.515] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.516] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.518] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.519] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.521] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.554] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.617] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.679] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.741] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.804] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.866] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.928] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:13.991] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:14.053] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:14.116] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:14.177] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:14.240] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:14.303] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:14.365] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:51:14.366] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.00478000008013 +[2026-05-03 06:51:14.366] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014199 +[2026-05-03 06:51:14.366] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.780581574412147 +[2026-05-03 06:51:15.988] [info] [clocksync.cpp:199] [1963] mcu 'toolhead': New minimum RTT: sent_time=1144.809482045,half_rtt=0.0002453334999472645,freq=119998549.84517398 +[2026-05-03 06:51:16.797] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:16.798] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:16.813] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1135746387 trigger_emit_ticks=1136130784 +[2026-05-03 06:51:16.814] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1135746387 134279732563 trigger_emit_ticks 1136130784 134280116960 +[2026-05-03 06:51:16.815] [info] [homing.cpp:266] [1885] endstop_name probe tt 1120.4147876744678 trigger_time 1120.4147876744678 move_end_print_time 1120.6671082083333 +[2026-05-03 06:51:16.816] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -759 trig_steps -758 start_pos -103299 trig_pos -104057 halt_pos -104058 +[2026-05-03 06:51:17.540] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 30.00346999996907 102.00131000011106 0.026846568838984758 spos 0.028081574412112786 probing_z -0.11441842558785309 +[2026-05-03 06:51:17.541] [info] [gcode.cpp:559] [1885] probe at 30.003,102.001 is z=0.026847 +[2026-05-03 06:51:17.542] [info] [load_cell_probe.cpp:333] [1885] run_probe time 3.176923502000136 +[2026-05-03 06:51:17.542] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 30.00346999996907 102.00131000011106 0.020231051839383406 +[2026-05-03 06:51:17.543] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:51:17.543] [info] [probe.cpp:857] [1885] _move_next 46 probe_points.size 121 + +[2026-05-03 06:51:17.552] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.00274000003378 +[2026-05-03 06:51:17.552] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.9998800001336 +[2026-05-03 06:51:17.552] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744122666 +[2026-05-03 06:51:18.767] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:18.768] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:18.769] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:51:18.784] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1372078444 trigger_emit_ticks=1372462797 +[2026-05-03 06:51:18.786] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1372078444 134516064620 trigger_emit_ticks 1372462797 134516448973 +[2026-05-03 06:51:18.787] [info] [homing.cpp:266] [1885] endstop_name probe tt 1122.3842539531606 trigger_time 1122.3842539531606 move_end_print_time 1122.6399313101188 +[2026-05-03 06:51:18.787] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1248 trig_steps -1244 start_pos -102811 trig_pos -104055 halt_pos -104059 +[2026-05-03 06:51:19.516] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.00142999995009 102.00131000008369 0.01639412112858188 spos 0.015581574412237842 probing_z -0.10941842558773329 +[2026-05-03 06:51:19.517] [info] [gcode.cpp:559] [1885] probe at 54.001,102.001 is z=0.016394 +[2026-05-03 06:51:19.518] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9734622099999797 +[2026-05-03 06:51:19.519] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.00274000003378 +[2026-05-03 06:51:19.519] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.9998800001336 +[2026-05-03 06:51:19.519] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8805815744122534 +[2026-05-03 06:51:20.030] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:20.030] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:20.049] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1523731947 trigger_emit_ticks=1524116323 +[2026-05-03 06:51:20.050] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1523731947 134667718123 trigger_emit_ticks 1524116323 134668102499 +[2026-05-03 06:51:20.051] [info] [homing.cpp:266] [1885] endstop_name probe tt 1123.6480510591482 trigger_time 1123.6480510591482 move_end_print_time 1123.903863833333 +[2026-05-03 06:51:20.051] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -445 trig_steps -443 start_pos -103659 trig_pos -104102 halt_pos -104104 +[2026-05-03 06:51:20.785] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.00142999995009 102.00131000008369 -0.005997151086849478 spos -0.006918425587798538 probing_z -0.22691842558774655 +[2026-05-03 06:51:20.786] [info] [gcode.cpp:559] [1885] probe at 54.001,102.001 is z=-0.005997 +[2026-05-03 06:51:20.786] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2685857919998398 +[2026-05-03 06:51:20.787] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.00274000003378 +[2026-05-03 06:51:20.788] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.9998800001336 +[2026-05-03 06:51:20.788] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7680815744122427 +[2026-05-03 06:51:21.281] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:21.282] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:21.283] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:51:21.297] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1673950534 trigger_emit_ticks=1674334885 +[2026-05-03 06:51:21.299] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1673950534 134817936710 trigger_emit_ticks 1674334885 134818321061 +[2026-05-03 06:51:21.299] [info] [homing.cpp:266] [1885] endstop_name probe tt 1124.899889834668 trigger_time 1124.899889834668 move_end_print_time 1125.15202825 +[2026-05-03 06:51:21.300] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -409 trig_steps -408 start_pos -103704 trig_pos -104112 halt_pos -104113 +[2026-05-03 06:51:22.243] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.00142999995009 102.00131000008369 -0.012222897597887056 spos -0.011918425587737147 probing_z -0.25191842558775734 +[2026-05-03 06:51:22.243] [info] [gcode.cpp:559] [1885] probe at 54.001,102.001 is z=-0.012223 +[2026-05-03 06:51:22.245] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4585704589999295 +[2026-05-03 06:51:22.245] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 54.00142999995009 102.0013100000837 -0.0006086425187182184 +[2026-05-03 06:51:22.246] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:51:22.247] [info] [probe.cpp:857] [1885] _move_next 47 probe_points.size 121 + +[2026-05-03 06:51:22.255] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.00069999998743 +[2026-05-03 06:51:22.255] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129772 +[2026-05-03 06:51:22.255] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574412362 +[2026-05-03 06:51:23.479] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:23.479] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:23.494] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1937673775 trigger_emit_ticks=1938058151 +[2026-05-03 06:51:23.497] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1937673775 135081659951 trigger_emit_ticks 1938058151 135082044327 +[2026-05-03 06:51:23.498] [info] [homing.cpp:266] [1885] endstop_name probe tt 1127.0976130817721 trigger_time 1127.0976130817721 move_end_print_time 1127.3501019202738 +[2026-05-03 06:51:23.498] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1251 trig_steps -1250 start_pos -102811 trig_pos -104061 halt_pos -104062 +[2026-05-03 06:51:24.229] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999992884 102.0013100000586 -0.0059280811660036015 spos -0.006918425587628008 probing_z -0.12441842558763794 +[2026-05-03 06:51:24.229] [info] [gcode.cpp:559] [1885] probe at 77.999,102.001 is z=-0.005928 +[2026-05-03 06:51:24.230] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.982434167000065 +[2026-05-03 06:51:24.231] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.00069999998743 +[2026-05-03 06:51:24.232] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129758 +[2026-05-03 06:51:24.232] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8730815744123491 +[2026-05-03 06:51:24.743] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:24.744] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:24.759] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2089339589 trigger_emit_ticks=2089723963 +[2026-05-03 06:51:24.765] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2089339589 135233325765 trigger_emit_ticks 2089723963 135233710139 +[2026-05-03 06:51:24.766] [info] [homing.cpp:266] [1885] endstop_name probe tt 1128.3615110103776 trigger_time 1128.3615110103776 move_end_print_time 1128.6163242083328 +[2026-05-03 06:51:24.766] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -446 trig_steps -445 start_pos -103662 trig_pos -104107 halt_pos -104108 +[2026-05-03 06:51:25.497] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999992884 102.0013100000586 -0.024446475927266093 spos -0.024418425587668935 probing_z -0.23941842558765092 +[2026-05-03 06:51:25.498] [info] [gcode.cpp:559] [1885] probe at 77.999,102.001 is z=-0.024446 +[2026-05-03 06:51:25.499] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2682236260000082 +[2026-05-03 06:51:25.500] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.00069999998743 +[2026-05-03 06:51:25.500] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129758 +[2026-05-03 06:51:25.500] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7580815744123387 +[2026-05-03 06:51:25.994] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:25.995] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:26.011] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2239467513 trigger_emit_ticks=2239851887 +[2026-05-03 06:51:26.013] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2239467513 135383453689 trigger_emit_ticks 2239851887 135383838063 +[2026-05-03 06:51:26.014] [info] [homing.cpp:266] [1885] endstop_name probe tt 1129.6125925646497 trigger_time 1129.6125925646497 move_end_print_time 1129.8653029583334 +[2026-05-03 06:51:26.014] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -410 trig_steps -409 start_pos -103708 trig_pos -104117 halt_pos -104118 +[2026-05-03 06:51:26.945] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999992884 102.0013100000586 -0.027532467849674974 spos -0.02691842558766666 probing_z -0.26441842558766127 +[2026-05-03 06:51:26.946] [info] [gcode.cpp:559] [1885] probe at 77.999,102.001 is z=-0.027532 +[2026-05-03 06:51:26.947] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4479965420000553 +[2026-05-03 06:51:26.947] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 77.99938999992884 102.0013100000586 -0.019302341647648224 +[2026-05-03 06:51:26.947] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:51:26.948] [info] [probe.cpp:857] [1885] _move_next 48 probe_points.size 121 + +[2026-05-03 06:51:26.956] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994108 +[2026-05-03 06:51:26.956] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130771412 +[2026-05-03 06:51:26.956] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574412458 +[2026-05-03 06:51:28.183] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:28.183] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:28.197] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2502143573 trigger_emit_ticks=2502527949 +[2026-05-03 06:51:28.198] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2502143573 135646129749 trigger_emit_ticks 2502527949 135646514125 +[2026-05-03 06:51:28.200] [info] [homing.cpp:266] [1885] endstop_name probe tt 1131.801580602263 trigger_time 1131.801580602263 move_end_print_time 1132.0538824166667 +[2026-05-03 06:51:28.200] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1256 trig_steps -1255 start_pos -102811 trig_pos -104066 halt_pos -104067 +[2026-05-03 06:51:28.931] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999990515 102.00131000003593 -0.013127290790649199 spos -0.011918425587566617 probing_z -0.1369184255875422 +[2026-05-03 06:51:28.931] [info] [gcode.cpp:559] [1885] probe at 101.997,102.001 is z=-0.013127 +[2026-05-03 06:51:28.932] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9834157509999386 +[2026-05-03 06:51:28.933] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994108 +[2026-05-03 06:51:28.933] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130760477 +[2026-05-03 06:51:28.934] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8605815744124452 +[2026-05-03 06:51:29.455] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:29.457] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:29.474] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2654673147 trigger_emit_ticks=2655057560 +[2026-05-03 06:51:29.476] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2654673147 135798659323 trigger_emit_ticks 2655057560 135799043736 +[2026-05-03 06:51:29.478] [info] [homing.cpp:266] [1885] endstop_name probe tt 1133.0726745933584 trigger_time 1133.0726745933584 move_end_print_time 1133.3309702916663 +[2026-05-03 06:51:29.479] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -445 trig_steps -438 start_pos -103667 trig_pos -104105 halt_pos -104112 +[2026-05-03 06:51:30.216] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999990517 102.00131000003591 -0.035318272036265225 spos -0.03441842558754615 probing_z -0.23441842558755477 +[2026-05-03 06:51:30.216] [info] [gcode.cpp:559] [1885] probe at 101.997,102.001 is z=-0.035318 +[2026-05-03 06:51:30.218] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2851762089999283 +[2026-05-03 06:51:30.219] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994108 +[2026-05-03 06:51:30.220] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130746266 +[2026-05-03 06:51:30.220] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.748081574412435 +[2026-05-03 06:51:30.711] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:30.711] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:30.728] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2805371247 trigger_emit_ticks=2805755623 +[2026-05-03 06:51:30.730] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2805371247 135949357423 trigger_emit_ticks 2805755623 135949741799 +[2026-05-03 06:51:30.732] [info] [homing.cpp:266] [1885] endstop_name probe tt 1134.3285071994671 trigger_time 1134.3285071994671 move_end_print_time 1134.5820420833334 +[2026-05-03 06:51:30.732] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -403 start_pos -103712 trig_pos -104115 halt_pos -104118 +[2026-05-03 06:51:31.671] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999990517 102.00131000003591 -0.03766475239397635 spos -0.03691842558754388 probing_z -0.2594184255875651 +[2026-05-03 06:51:31.672] [info] [gcode.cpp:559] [1885] probe at 101.997,102.001 is z=-0.037665 +[2026-05-03 06:51:31.672] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4547587499998826 +[2026-05-03 06:51:31.673] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 101.99734999990517 102.00131000003591 -0.02870343840696359 +[2026-05-03 06:51:31.673] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:51:31.674] [info] [probe.cpp:857] [1885] _move_next 49 probe_points.size 121 + +[2026-05-03 06:51:31.683] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.99661999989473 +[2026-05-03 06:51:31.683] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.99399999986824 +[2026-05-03 06:51:31.683] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574412554 +[2026-05-03 06:51:32.918] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:32.919] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:32.920] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:51:32.934] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3070259521 trigger_emit_ticks=3070643897 +[2026-05-03 06:51:32.935] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3070259521 136214245697 trigger_emit_ticks 3070643897 136214630073 +[2026-05-03 06:51:32.936] [info] [homing.cpp:266] [1885] endstop_name probe tt 1136.5359415982673 trigger_time 1136.5359415982673 move_end_print_time 1136.7891990416667 +[2026-05-03 06:51:32.937] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1276 trig_steps -1272 start_pos -102811 trig_pos -104083 halt_pos -104087 +[2026-05-03 06:51:33.625] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 125.99530999988148 102.00131000001325 -0.05577415217722767 spos -0.056918425587412 probing_z -0.17941842558744625 +[2026-05-03 06:51:33.626] [info] [gcode.cpp:559] [1885] probe at 125.995,102.001 is z=-0.055774 +[2026-05-03 06:51:33.626] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9520073339999726 +[2026-05-03 06:51:33.628] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998947 +[2026-05-03 06:51:33.628] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868237 +[2026-05-03 06:51:33.628] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8105815744125424 +[2026-05-03 06:51:34.137] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:34.137] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:34.154] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3216851525 +[2026-05-03 06:51:34.156] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 137438953472 trigger_emit_ticks 3216851525 136360837701 +[2026-05-03 06:51:34.157] [info] [homing.cpp:266] [1885] endstop_name probe tt 1137.7543565025308 trigger_time 1137.7543565025308 move_end_print_time 1138.0124178333328 +[2026-05-03 06:51:34.157] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -442 trig_steps -439 start_pos -103687 trig_pos -104126 halt_pos -104129 +[2026-05-03 06:51:34.884] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 125.99530999988147 102.00131000001323 -0.07313523546959239 spos -0.07191842558751205 probing_z -0.2869184255874575 +[2026-05-03 06:51:34.885] [info] [gcode.cpp:559] [1885] probe at 125.995,102.001 is z=-0.073135 +[2026-05-03 06:51:34.885] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2588537510000606 +[2026-05-03 06:51:34.886] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998947 +[2026-05-03 06:51:34.887] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868237 +[2026-05-03 06:51:34.887] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7055815744125322 +[2026-05-03 06:51:35.378] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:35.379] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:35.395] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3365440431 trigger_emit_ticks=3365815454 +[2026-05-03 06:51:35.397] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3365440431 136509426607 trigger_emit_ticks 3365815454 136509801630 +[2026-05-03 06:51:35.399] [info] [homing.cpp:266] [1885] endstop_name probe tt 1138.995740802745 trigger_time 1138.995740802745 move_end_print_time 1139.249299125 +[2026-05-03 06:51:35.399] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -404 start_pos -103729 trig_pos -104133 halt_pos -104136 +[2026-05-03 06:51:36.332] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 125.99530999988147 102.00131000001323 -0.07556948569667282 spos -0.07441842558745293 probing_z -0.3044184255874678 +[2026-05-03 06:51:36.332] [info] [gcode.cpp:559] [1885] probe at 125.995,102.001 is z=-0.075569 +[2026-05-03 06:51:36.333] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4477351250000083 +[2026-05-03 06:51:36.334] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 125.99530999988148 102.00131000001323 -0.06815962444783095 +[2026-05-03 06:51:36.334] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:51:36.335] [info] [probe.cpp:857] [1885] _move_next 50 probe_points.size 121 + +[2026-05-03 06:51:36.344] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984836 +[2026-05-03 06:51:36.344] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.00441999987206 +[2026-05-03 06:51:36.344] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744126503 +[2026-05-03 06:51:37.583] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:37.583] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:37.597] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3630407793 +[2026-05-03 06:51:37.598] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 137438953472 trigger_emit_ticks 3630407793 136774393969 +[2026-05-03 06:51:37.599] [info] [homing.cpp:266] [1885] endstop_name probe tt 1141.2007087209774 trigger_time 1141.2007087209774 move_end_print_time 1141.4535805833334 +[2026-05-03 06:51:37.599] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1278 trig_steps -1276 start_pos -102811 trig_pos -104087 halt_pos -104089 +[2026-05-03 06:51:38.333] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999998602 101.99507999998815 -0.06978438935855988 spos -0.06941842558734379 probing_z -0.18941842558734967 +[2026-05-03 06:51:38.334] [info] [gcode.cpp:559] [1885] probe at 149.999,101.995 is z=-0.069784 +[2026-05-03 06:51:38.334] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9990641680001318 +[2026-05-03 06:51:38.335] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984836 +[2026-05-03 06:51:38.336] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.004419999872056 +[2026-05-03 06:51:38.336] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8055815744126386 +[2026-05-03 06:51:38.846] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:38.848] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:38.862] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3781490428 trigger_emit_ticks=3781874779 +[2026-05-03 06:51:38.863] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3781490428 136925476604 trigger_emit_ticks 3781874779 136925860955 +[2026-05-03 06:51:38.865] [info] [homing.cpp:266] [1885] endstop_name probe tt 1142.4629515999832 trigger_time 1142.4629515999832 move_end_print_time 1142.7201690416662 +[2026-05-03 06:51:38.865] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -445 trig_steps -441 start_pos -103689 trig_pos -104130 halt_pos -104134 +[2026-05-03 06:51:39.591] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999998602 101.99507999998815 -0.08712095523269175 spos -0.08691842558738472 probing_z -0.2969184255873615 +[2026-05-03 06:51:39.592] [info] [gcode.cpp:559] [1885] probe at 149.999,101.995 is z=-0.087121 +[2026-05-03 06:51:39.593] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2584347929998785 +[2026-05-03 06:51:39.594] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984836 +[2026-05-03 06:51:39.594] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.004419999872056 +[2026-05-03 06:51:39.594] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.6930815744126283 +[2026-05-03 06:51:40.085] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:40.086] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:40.100] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3930368105 trigger_emit_ticks=3930752504 +[2026-05-03 06:51:40.102] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3930368105 137074354281 trigger_emit_ticks 3930752504 137074738680 +[2026-05-03 06:51:40.105] [info] [homing.cpp:266] [1885] endstop_name probe tt 1143.7036148264667 trigger_time 1143.7036148264667 move_end_print_time 1143.9563890416666 +[2026-05-03 06:51:40.105] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -404 start_pos -103734 trig_pos -104138 halt_pos -104140 +[2026-05-03 06:51:41.038] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999998602 101.99507999998815 -0.08667019486433519 spos -0.08691842558738472 probing_z -0.3169184255873717 +[2026-05-03 06:51:41.039] [info] [gcode.cpp:559] [1885] probe at 149.999,101.995 is z=-0.086670 +[2026-05-03 06:51:41.040] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4469694179999806 +[2026-05-03 06:51:41.040] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 149.9994999998602 101.99507999998815 -0.0811918464851956 +[2026-05-03 06:51:41.041] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:51:41.041] [info] [probe.cpp:857] [1885] _move_next 51 probe_points.size 121 + +[2026-05-03 06:51:41.050] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989324 +[2026-05-03 06:51:41.050] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988045 +[2026-05-03 06:51:41.050] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574412746 +[2026-05-03 06:51:42.286] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:42.287] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:42.301] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4194494787 trigger_emit_ticks=4194879163 +[2026-05-03 06:51:42.302] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4194494787 137338480963 trigger_emit_ticks 4194879163 137338865339 +[2026-05-03 06:51:42.304] [info] [homing.cpp:266] [1885] endstop_name probe tt 1145.9046977870455 trigger_time 1145.9046977870455 move_end_print_time 1146.1567822083334 +[2026-05-03 06:51:42.304] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1271 trig_steps -1270 start_pos -102811 trig_pos -104081 halt_pos -104082 +[2026-05-03 06:51:42.997] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 174.00368999988683 102.0013100000064 -0.06361101910492725 spos -0.0644184255872915 probing_z -0.17441842558725407 +[2026-05-03 06:51:42.997] [info] [gcode.cpp:559] [1885] probe at 174.004,102.001 is z=-0.063611 +[2026-05-03 06:51:42.998] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9563409590000447 +[2026-05-03 06:51:42.999] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989324 +[2026-05-03 06:51:42.999] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988045 +[2026-05-03 06:51:43.000] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8230815744127341 +[2026-05-03 06:51:43.506] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:43.506] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:43.523] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=45923967 trigger_emit_ticks=46308341 +[2026-05-03 06:51:43.525] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 45923967 137484877439 trigger_emit_ticks 46308341 137485261813 +[2026-05-03 06:51:43.526] [info] [homing.cpp:266] [1885] endstop_name probe tt 1147.1246837045537 trigger_time 1147.1246837045537 move_end_print_time 1147.3817807499995 +[2026-05-03 06:51:43.526] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -442 trig_steps -441 start_pos -103682 trig_pos -104123 halt_pos -104124 +[2026-05-03 06:51:44.250] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 174.00368999988683 102.0013100000064 -0.07701576581943465 spos -0.07691842558728013 probing_z -0.27941842558726593 +[2026-05-03 06:51:44.251] [info] [gcode.cpp:559] [1885] probe at 174.004,102.001 is z=-0.077016 +[2026-05-03 06:51:44.252] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.253466417000027 +[2026-05-03 06:51:44.253] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989324 +[2026-05-03 06:51:44.253] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988045 +[2026-05-03 06:51:44.253] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7180815744127239 +[2026-05-03 06:51:44.747] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:44.747] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:44.762] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=194801505 trigger_emit_ticks=195185881 +[2026-05-03 06:51:44.763] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 194801505 137633754977 trigger_emit_ticks 195185881 137634139353 +[2026-05-03 06:51:44.765] [info] [homing.cpp:266] [1885] endstop_name probe tt 1148.3653457091139 trigger_time 1148.3653457091139 move_end_print_time 1148.6172794166666 +[2026-05-03 06:51:44.765] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -411 trig_steps -410 start_pos -103724 trig_pos -104134 halt_pos -104135 +[2026-05-03 06:51:45.645] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 174.00368999988683 102.0013100000064 -0.07617800494030519 spos -0.07691842558733697 probing_z -0.306918425587276 +[2026-05-03 06:51:45.646] [info] [gcode.cpp:559] [1885] probe at 174.004,102.001 is z=-0.076178 +[2026-05-03 06:51:45.647] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3950956260000567 +[2026-05-03 06:51:45.647] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 174.00368999988686 102.0013100000064 -0.07226826328822236 +[2026-05-03 06:51:45.648] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:51:45.649] [info] [probe.cpp:857] [1885] _move_next 52 probe_points.size 121 + +[2026-05-03 06:51:45.658] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999564 +[2026-05-03 06:51:45.658] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988884 +[2026-05-03 06:51:45.658] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574412842 +[2026-05-03 06:51:46.897] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:46.898] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:46.913] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=452874477 trigger_emit_ticks=453258853 +[2026-05-03 06:51:46.914] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 452874477 137891827949 trigger_emit_ticks 453258853 137892212325 +[2026-05-03 06:51:46.915] [info] [homing.cpp:266] [1885] endstop_name probe tt 1150.5159807378384 trigger_time 1150.5159807378384 move_end_print_time 1150.768290625 +[2026-05-03 06:51:46.916] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1280 trig_steps -1279 start_pos -102811 trig_pos -104090 halt_pos -104091 +[2026-05-03 06:51:47.646] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.00164999992262 102.00131000003377 -0.08673132549634219 spos -0.08691842558715734 probing_z -0.1969184255871581 +[2026-05-03 06:51:47.646] [info] [gcode.cpp:559] [1885] probe at 198.002,102.001 is z=-0.086731 +[2026-05-03 06:51:47.647] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9975016680000408 +[2026-05-03 06:51:47.648] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999564 +[2026-05-03 06:51:47.648] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988887 +[2026-05-03 06:51:47.648] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8005815744128306 +[2026-05-03 06:51:48.161] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:48.162] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:48.178] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=604245327 trigger_emit_ticks=604629703 +[2026-05-03 06:51:48.179] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 604245327 138043198799 trigger_emit_ticks 604629703 138043583175 +[2026-05-03 06:51:48.180] [info] [homing.cpp:266] [1885] endstop_name probe tt 1151.777420340676 trigger_time 1151.777420340676 move_end_print_time 1152.0338855416662 +[2026-05-03 06:51:48.180] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -447 trig_steps -442 start_pos -103691 trig_pos -104133 halt_pos -104138 +[2026-05-03 06:51:48.907] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.00164999992262 102.00131000003375 -0.0981506939257048 spos -0.09691842558714825 probing_z -0.30441842558716936 +[2026-05-03 06:51:48.907] [info] [gcode.cpp:559] [1885] probe at 198.002,102.001 is z=-0.098151 +[2026-05-03 06:51:48.909] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2617996260000837 +[2026-05-03 06:51:48.910] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:51:48.911] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:51:48.912] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.915] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.917] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.919] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.921] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.923] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.925] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.927] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.929] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.931] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.932] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.935] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.937] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.938] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.940] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.942] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.943] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.946] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.948] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.950] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.951] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.953] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.955] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.958] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.960] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.961] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.963] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:48.990] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:49.052] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:49.114] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:49.177] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:49.238] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:49.301] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:49.363] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:49.426] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:49.488] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:49.551] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:49.613] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:49.676] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:49.738] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:51:49.800] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:51:49.801] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999564 +[2026-05-03 06:51:49.801] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988887 +[2026-05-03 06:51:49.801] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.6830815744127992 +[2026-05-03 06:51:52.233] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:52.233] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:52.251] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1093175743 trigger_emit_ticks=1093560119 +[2026-05-03 06:51:52.252] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1093175743 138532129215 trigger_emit_ticks 1093560119 138532513591 +[2026-05-03 06:51:52.254] [info] [homing.cpp:266] [1885] endstop_name probe tt 1155.8518938921447 trigger_time 1155.8518938921447 move_end_print_time 1156.1051234166666 +[2026-05-03 06:51:52.254] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -762 trig_steps -761 start_pos -103338 trig_pos -104099 halt_pos -104100 +[2026-05-03 06:51:52.997] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.00164999992262 102.00131000003375 -0.08902023394503919 spos -0.08941842558721191 probing_z -0.21941842558720093 +[2026-05-03 06:51:52.998] [info] [gcode.cpp:559] [1885] probe at 198.002,102.001 is z=-0.089020 +[2026-05-03 06:51:52.999] [info] [load_cell_probe.cpp:333] [1885] run_probe time 3.198681709999846 +[2026-05-03 06:51:52.999] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 198.00164999992262 102.00131000003375 -0.09130075112236206 +[2026-05-03 06:51:52.999] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:51:53.000] [info] [probe.cpp:857] [1885] _move_next 53 probe_points.size 121 + +[2026-05-03 06:51:53.009] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.0009200000195 +[2026-05-03 06:51:53.010] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989726 +[2026-05-03 06:51:53.010] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744129185 +[2026-05-03 06:51:54.244] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:54.245] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:54.260] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1334456015 trigger_emit_ticks=1334840391 +[2026-05-03 06:51:54.262] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1334456015 138773409487 trigger_emit_ticks 1334840391 138773793863 +[2026-05-03 06:51:54.263] [info] [homing.cpp:266] [1885] endstop_name probe tt 1157.862590451493 trigger_time 1157.862590451493 move_end_print_time 1158.115605875 +[2026-05-03 06:51:54.263] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1278 trig_steps -1277 start_pos -102811 trig_pos -104088 halt_pos -104089 +[2026-05-03 06:51:54.957] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99960999995838 102.00131000006112 -0.07987244301165394 spos -0.07941842558705048 probing_z -0.1919184255870814 +[2026-05-03 06:51:54.957] [info] [gcode.cpp:559] [1885] probe at 222.000,102.001 is z=-0.079872 +[2026-05-03 06:51:54.958] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9575320419999116 +[2026-05-03 06:51:54.959] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.0009200000195 +[2026-05-03 06:51:54.960] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989723 +[2026-05-03 06:51:54.960] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8055815744129068 +[2026-05-03 06:51:55.472] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:55.472] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:55.501] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1481800531 trigger_emit_ticks=1482184905 +[2026-05-03 06:51:55.503] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1481800531 138920754003 trigger_emit_ticks 1482184905 138921138377 +[2026-05-03 06:51:55.504] [info] [homing.cpp:266] [1885] endstop_name probe tt 1159.0904785149366 trigger_time 1159.0904785149366 move_end_print_time 1159.355759625 +[2026-05-03 06:51:55.505] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -445 trig_steps -444 start_pos -103689 trig_pos -104133 halt_pos -104134 +[2026-05-03 06:51:56.232] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99960999995835 102.00131000006114 -0.09281679748369426 spos -0.09191842558709595 probing_z -0.3044184255870933 +[2026-05-03 06:51:56.232] [info] [gcode.cpp:559] [1885] probe at 222.000,102.001 is z=-0.092817 +[2026-05-03 06:51:56.233] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2747779169999376 +[2026-05-03 06:51:56.234] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.0009200000195 +[2026-05-03 06:51:56.235] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989721 +[2026-05-03 06:51:56.235] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.6930815744128965 +[2026-05-03 06:51:56.730] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:56.730] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:56.745] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1632789467 trigger_emit_ticks=1633173918 +[2026-05-03 06:51:56.748] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1632789467 139071742939 trigger_emit_ticks 1633173918 139072127390 +[2026-05-03 06:51:56.749] [info] [homing.cpp:266] [1885] endstop_name probe tt 1160.3487367730418 trigger_time 1160.3487367730418 move_end_print_time 1160.6009660833333 +[2026-05-03 06:51:56.750] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -411 trig_steps -410 start_pos -103734 trig_pos -104144 halt_pos -104145 +[2026-05-03 06:51:57.676] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99960999995835 102.00131000006115 -0.09500134309983271 spos -0.09441842558709368 probing_z -0.3319184255871034 +[2026-05-03 06:51:57.676] [info] [gcode.cpp:559] [1885] probe at 222.000,102.001 is z=-0.095001 +[2026-05-03 06:51:57.679] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.445682917999875 +[2026-05-03 06:51:57.680] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 221.99960999995835 102.00131000006114 -0.08923019453172698 +[2026-05-03 06:51:57.681] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:51:57.682] [info] [probe.cpp:857] [1885] _move_next 54 probe_points.size 121 + +[2026-05-03 06:51:57.690] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.99888000008264 +[2026-05-03 06:51:57.691] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 143.9962599998691 +[2026-05-03 06:51:57.691] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744130144 +[2026-05-03 06:51:58.934] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:51:58.935] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:51:58.949] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1897076325 trigger_emit_ticks=1897460701 +[2026-05-03 06:51:58.951] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1897076325 139336029797 trigger_emit_ticks 1897460701 139336414173 +[2026-05-03 06:51:58.952] [info] [homing.cpp:266] [1885] endstop_name probe tt 1162.5511542144218 trigger_time 1162.5511542144218 move_end_print_time 1162.80490375 +[2026-05-03 06:51:58.953] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1284 trig_steps -1280 start_pos -102811 trig_pos -104091 halt_pos -104095 +[2026-05-03 06:51:59.839] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.99756999997587 102.00131000010677 -0.08660521136673524 spos -0.08691842558698681 probing_z -0.19941842558698575 +[2026-05-03 06:51:59.839] [info] [gcode.cpp:559] [1885] probe at 245.998,102.001 is z=-0.086605 +[2026-05-03 06:51:59.840] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.158118209999884 +[2026-05-03 06:51:59.842] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.99888000008264 +[2026-05-03 06:51:59.842] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 143.99625999986907 +[2026-05-03 06:51:59.842] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7905815744130034 +[2026-05-03 06:52:00.356] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:00.356] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:00.358] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:52:00.376] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2067888349 trigger_emit_ticks=2068272723 +[2026-05-03 06:52:00.378] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2067888349 139506841821 trigger_emit_ticks 2068272723 139507226195 +[2026-05-03 06:52:00.378] [info] [homing.cpp:266] [1885] endstop_name probe tt 1163.9746064364274 trigger_time 1163.9746064364274 move_end_print_time 1164.2275859166662 +[2026-05-03 06:52:00.379] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -450 trig_steps -449 start_pos -103695 trig_pos -104144 halt_pos -104145 +[2026-05-03 06:52:01.110] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.99756999997584 102.00131000010678 -0.092596394930966 spos -0.09191842558698227 probing_z -0.3319184255869967 +[2026-05-03 06:52:01.110] [info] [gcode.cpp:559] [1885] probe at 245.998,102.001 is z=-0.092596 +[2026-05-03 06:52:01.112] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.270951126 +[2026-05-03 06:52:01.113] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.99888000008264 +[2026-05-03 06:52:01.113] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 143.99625999986907 +[2026-05-03 06:52:01.113] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.6655815744129931 +[2026-05-03 06:52:01.607] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:01.607] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:01.623] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2218000040 trigger_emit_ticks=2218375017 +[2026-05-03 06:52:01.625] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2218000040 139656953512 trigger_emit_ticks 2218375017 139657328489 +[2026-05-03 06:52:01.626] [info] [homing.cpp:266] [1885] endstop_name probe tt 1165.225476246016 trigger_time 1165.225476246016 move_end_print_time 1165.4782069166667 +[2026-05-03 06:52:01.626] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -413 trig_steps -411 start_pos -103745 trig_pos -104156 halt_pos -104158 +[2026-05-03 06:52:02.566] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.99756999997584 102.00131000010678 -0.104683473493621 spos -0.10441842558702774 probing_z -0.36191842558700693 +[2026-05-03 06:52:02.566] [info] [gcode.cpp:559] [1885] probe at 245.998,102.001 is z=-0.104683 +[2026-05-03 06:52:02.567] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4552677509998375 +[2026-05-03 06:52:02.567] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 245.9975699999758 102.00131000010678 -0.09462835993044076 +[2026-05-03 06:52:02.568] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:52:02.569] [info] [probe.cpp:857] [1885] _move_next 55 probe_points.size 121 + +[2026-05-03 06:52:02.578] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.99684000014577 +[2026-05-03 06:52:02.578] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989716 +[2026-05-03 06:52:02.578] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744131104 +[2026-05-03 06:52:03.825] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:03.840] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=2484477595 +[2026-05-03 06:52:03.841] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 141733920768 trigger_emit_ticks 2484477595 139923431067 +[2026-05-03 06:52:03.842] [info] [homing.cpp:266] [1885] endstop_name probe tt 1167.4430280365018 trigger_time 1167.4430280365018 move_end_print_time 1167.6950149583333 +[2026-05-03 06:52:03.843] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1288 trig_steps -1287 start_pos -102811 trig_pos -104098 halt_pos -104099 +[2026-05-03 06:52:04.727] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.99757000002145 125.99927000012431 -0.09272571996587284 spos -0.09191842558686858 probing_z -0.2169184255868899 +[2026-05-03 06:52:04.727] [info] [gcode.cpp:559] [1885] probe at 245.998,125.999 is z=-0.092726 +[2026-05-03 06:52:04.729] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1589296260001447 +[2026-05-03 06:52:04.730] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.99684000014577 +[2026-05-03 06:52:04.730] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.99829999989711 +[2026-05-03 06:52:04.730] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7805815744130993 +[2026-05-03 06:52:05.230] [info] [clocksync.cpp:212] [1961] mcu 'bed_sensor': Ignoring clock sample: sent_time=1194.051816152,time_avg=1164.5072576929,freq=119998411.33499987,diff=76037.44500732422(0.0006336453750610351),stddev=3974.715383733283 +[2026-05-03 06:52:05.246] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:05.247] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:05.263] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2654422027 trigger_emit_ticks=2654806401 +[2026-05-03 06:52:05.265] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2654422027 140093375499 trigger_emit_ticks 2654806401 140093759873 +[2026-05-03 06:52:05.266] [info] [homing.cpp:266] [1885] endstop_name probe tt 1168.8624534170226 trigger_time 1168.8624534170226 move_end_print_time 1169.1172153333334 +[2026-05-03 06:52:05.267] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -461 trig_steps -455 start_pos -103699 trig_pos -104154 halt_pos -104160 +[2026-05-03 06:52:05.991] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.99757000002143 125.99927000012433 -0.1079302085686144 spos -0.10691842558691178 probing_z -0.3569184255869007 +[2026-05-03 06:52:05.991] [info] [gcode.cpp:559] [1885] probe at 245.998,125.999 is z=-0.107930 +[2026-05-03 06:52:05.993] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2640104170000086 +[2026-05-03 06:52:05.995] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.99684000014577 +[2026-05-03 06:52:05.995] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 119.9982999998971 +[2026-05-03 06:52:05.995] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.628081574413089 +[2026-05-03 06:52:06.499] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:06.500] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:06.530] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2805005916 trigger_emit_ticks=2805380893 +[2026-05-03 06:52:06.532] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2805005916 140243959388 trigger_emit_ticks 2805380893 140244334365 +[2026-05-03 06:52:06.533] [info] [homing.cpp:266] [1885] endstop_name probe tt 1170.117257670246 trigger_time 1170.117257670246 move_end_print_time 1170.3827316666666 +[2026-05-03 06:52:06.533] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -405 trig_steps -404 start_pos -103760 trig_pos -104164 halt_pos -104165 +[2026-05-03 06:52:07.462] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.99757000002143 125.99927000012434 -0.11321185230685077 spos -0.11441842558684812 probing_z -0.381918425586911 +[2026-05-03 06:52:07.462] [info] [gcode.cpp:559] [1885] probe at 245.998,125.999 is z=-0.113212 +[2026-05-03 06:52:07.463] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4694187499999316 +[2026-05-03 06:52:07.463] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 245.99757000002145 125.99927000012433 -0.10462259361377935 +[2026-05-03 06:52:07.463] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:52:07.464] [info] [probe.cpp:857] [1885] _move_next 56 probe_points.size 121 + +[2026-05-03 06:52:07.472] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.99888000008264 +[2026-05-03 06:52:07.473] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988871 +[2026-05-03 06:52:07.473] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574413206 +[2026-05-03 06:52:08.183] [info] [clocksync.cpp:199] [1963] mcu 'toolhead': New minimum RTT: sent_time=1197.004611778,half_rtt=0.00024270849996810284,freq=119998528.28580847 +[2026-05-03 06:52:08.723] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:08.723] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:08.738] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3071858051 trigger_emit_ticks=3072242425 +[2026-05-03 06:52:08.739] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3071858051 140510811523 trigger_emit_ticks 3072242425 140511195897 +[2026-05-03 06:52:08.740] [info] [homing.cpp:266] [1885] endstop_name probe tt 1172.3411330405643 trigger_time 1172.3411330405643 move_end_print_time 1172.59302575 +[2026-05-03 06:52:08.740] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1292 trig_steps -1291 start_pos -102811 trig_pos -104102 halt_pos -104103 +[2026-05-03 06:52:09.634] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99960999998567 125.99927000009697 -0.10439958014515757 spos -0.10441842558680037 probing_z -0.2269184255867942 +[2026-05-03 06:52:09.635] [info] [gcode.cpp:559] [1885] probe at 222.000,125.999 is z=-0.104400 +[2026-05-03 06:52:09.635] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1705771259998983 +[2026-05-03 06:52:09.636] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.9988800000826 +[2026-05-03 06:52:09.637] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988868 +[2026-05-03 06:52:09.637] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7705815744131952 +[2026-05-03 06:52:09.797] [error] [tmc_uart.cpp:295] [1885] _decode_read error #0 +[2026-05-03 06:52:10.152] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:10.152] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:10.169] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3243338487 trigger_emit_ticks=3243722861 +[2026-05-03 06:52:10.171] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3243338487 140682291959 trigger_emit_ticks 3243722861 140682676333 +[2026-05-03 06:52:10.172] [info] [homing.cpp:266] [1885] endstop_name probe tt 1173.7701560843452 trigger_time 1173.7701560843452 move_end_print_time 1174.0227024583332 +[2026-05-03 06:52:10.172] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -453 trig_steps -451 start_pos -103703 trig_pos -104154 halt_pos -104156 +[2026-05-03 06:52:10.898] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99960999998564 125.99927000009694 -0.13110148126940196 spos -0.1319184255868322 probing_z -0.35691842558680476 +[2026-05-03 06:52:10.898] [info] [gcode.cpp:559] [1885] probe at 222.000,125.999 is z=-0.131101 +[2026-05-03 06:52:10.899] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.2633003340001778 +[2026-05-03 06:52:10.900] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.9988800000826 +[2026-05-03 06:52:10.900] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988871 +[2026-05-03 06:52:10.900] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.6380815744131849 +[2026-05-03 06:52:11.397] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:11.398] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:11.399] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:52:11.413] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3392878719 trigger_emit_ticks=3393253719 +[2026-05-03 06:52:11.415] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3392878719 140831832191 trigger_emit_ticks 3393253719 140832207191 +[2026-05-03 06:52:11.416] [info] [homing.cpp:266] [1885] endstop_name probe tt 1175.0162638498152 trigger_time 1175.0162638498152 move_end_print_time 1175.26837925 +[2026-05-03 06:52:11.416] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -417 trig_steps -416 start_pos -103756 trig_pos -104172 halt_pos -104173 +[2026-05-03 06:52:12.246] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99960999998564 125.99927000009694 -0.16457171096372453 spos -0.16441842558680264 probing_z -0.4019184255868151 +[2026-05-03 06:52:12.246] [info] [gcode.cpp:559] [1885] probe at 222.000,125.999 is z=-0.164572 +[2026-05-03 06:52:12.247] [error] [load_cell_probe.cpp:304] [1885] max_value -0.10439958014515757 min_value -0.16457171096372453 range 0.060172130818566955 +[2026-05-03 06:52:12.248] [error] [load_cell_probe.cpp:312] [1885] retries 0 samples_retries 20 +[2026-05-03 06:52:12.248] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3489827500000047 +[2026-05-03 06:52:12.250] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.9988800000826 +[2026-05-03 06:52:12.250] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988871 +[2026-05-03 06:52:12.250] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.5955815744131534 +[2026-05-03 06:52:13.089] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:13.089] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:13.107] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3595793857 trigger_emit_ticks=3596178233 +[2026-05-03 06:52:13.120] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3595793857 trigger_emit_ticks=3596178233 +[2026-05-03 06:52:13.122] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3595793857 141034747329 trigger_emit_ticks 3596178233 141035131705 +[2026-05-03 06:52:13.123] [info] [homing.cpp:266] [1885] endstop_name probe tt 1176.7073243670775 trigger_time 1176.7073243670775 move_end_print_time 1176.9611913333333 +[2026-05-03 06:52:13.123] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -749 trig_steps -748 start_pos -103373 trig_pos -104121 halt_pos -104122 +[2026-05-03 06:52:14.003] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99960999998564 125.99927000009694 -0.12337940067204806 spos -0.12441842558689586 probing_z -0.2744184255868467 +[2026-05-03 06:52:14.004] [info] [gcode.cpp:559] [1885] probe at 222.000,125.999 is z=-0.123379 +[2026-05-03 06:52:14.005] [error] [load_cell_probe.cpp:304] [1885] max_value -0.12337940067204806 min_value -0.16457171096372453 range 0.04119231029167647 +[2026-05-03 06:52:14.005] [error] [load_cell_probe.cpp:312] [1885] retries 1 samples_retries 20 +[2026-05-03 06:52:14.006] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.7576863760000379 +[2026-05-03 06:52:14.008] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.9988800000826 +[2026-05-03 06:52:14.008] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988871 +[2026-05-03 06:52:14.008] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.7230815744131218 +[2026-05-03 06:52:14.865] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:14.866] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:14.880] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3808977557 trigger_emit_ticks=3809361933 +[2026-05-03 06:52:14.883] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3808977557 141247931029 trigger_emit_ticks 3809361933 141248315405 +[2026-05-03 06:52:14.883] [info] [homing.cpp:266] [1885] endstop_name probe tt 1178.4838789098808 trigger_time 1178.4838789098808 move_end_print_time 1178.736343875 +[2026-05-03 06:52:14.883] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -787 trig_steps -786 start_pos -103322 trig_pos -104108 halt_pos -104109 +[2026-05-03 06:52:15.767] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99960999998564 125.99927000009694 -0.10938934878346626 spos -0.1094184255869095 probing_z -0.24191842558687826 +[2026-05-03 06:52:15.769] [info] [gcode.cpp:559] [1885] probe at 222.000,125.999 is z=-0.109389 +[2026-05-03 06:52:15.770] [error] [load_cell_probe.cpp:304] [1885] max_value -0.10938934878346626 min_value -0.16457171096372453 range 0.055182362180258265 +[2026-05-03 06:52:15.770] [error] [load_cell_probe.cpp:312] [1885] retries 2 samples_retries 20 +[2026-05-03 06:52:15.770] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.7643581670001822 +[2026-05-03 06:52:16.690] [info] [load_cell_probe.cpp:866] [1885] pause_and_tare avg 41019.03076923077 std 811.9264315739829 retry 0 +[2026-05-03 06:52:16.691] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.9988800000826 +[2026-05-03 06:52:16.691] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.00033999988871 +[2026-05-03 06:52:16.691] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 10.75558157441401 +[2026-05-03 06:52:19.031] [info] [clocksync.cpp:212] [1961] mcu 'bed_sensor': Ignoring clock sample: sent_time=1207.8519352839999,time_avg=1177.6603749624953,freq=119998394.51502672,diff=108606.56564331055(0.0009050547136942546),stddev=3561.4581110156632 +[2026-05-03 06:52:19.191] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:19.191] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:19.207] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=33075851 trigger_emit_ticks=33460227 +[2026-05-03 06:52:19.209] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 33075851 141766996619 trigger_emit_ticks 33460227 141767380995 +[2026-05-03 06:52:19.210] [info] [homing.cpp:266] [1885] endstop_name probe tt 1182.8094876340647 trigger_time 1182.8094876340647 move_end_print_time 1183.061320625 +[2026-05-03 06:52:19.210] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -4422 trig_steps -4421 start_pos -99709 trig_pos -104130 halt_pos -104131 +[2026-05-03 06:52:20.072] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99960999998564 125.99927000009694 -0.11868501614909993 spos -0.11941842558599092 probing_z -0.29691842558598935 +[2026-05-03 06:52:20.072] [info] [gcode.cpp:559] [1885] probe at 222.000,125.999 is z=-0.118685 +[2026-05-03 06:52:20.073] [info] [load_cell_probe.cpp:333] [1885] run_probe time 4.3026802519998455 +[2026-05-03 06:52:20.073] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 221.99960999998564 125.99927000009694 -0.11715125520153809 +[2026-05-03 06:52:20.074] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:52:20.074] [info] [probe.cpp:857] [1885] _move_next 57 probe_points.size 121 + +[2026-05-03 06:52:20.084] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.00092000001945 +[2026-05-03 06:52:20.084] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988032 +[2026-05-03 06:52:20.084] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744141295 +[2026-05-03 06:52:21.344] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:21.345] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:21.359] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=291406851 trigger_emit_ticks=291791225 +[2026-05-03 06:52:21.362] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 291406851 142025327619 trigger_emit_ticks 291791225 142025711993 +[2026-05-03 06:52:21.363] [info] [homing.cpp:266] [1885] endstop_name probe tt 1184.9622809707687 trigger_time 1184.9622809707687 move_end_print_time 1185.21424475 +[2026-05-03 06:52:21.363] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1322 trig_steps -1321 start_pos -102811 trig_pos -104132 halt_pos -104133 +[2026-05-03 06:52:22.258] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.00164999994988 125.99927000006957 -0.13727632954211705 spos -0.13691842558591816 probing_z -0.3019184255858707 +[2026-05-03 06:52:22.259] [info] [gcode.cpp:559] [1885] probe at 198.002,125.999 is z=-0.137276 +[2026-05-03 06:52:22.260] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1847900850000315 +[2026-05-03 06:52:22.261] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.0009200000194 +[2026-05-03 06:52:22.261] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988028 +[2026-05-03 06:52:22.261] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.6955815744141192 +[2026-05-03 06:52:22.751] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:22.751] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:22.767] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=460218065 trigger_emit_ticks=460602439 +[2026-05-03 06:52:22.769] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 460218065 142194138833 trigger_emit_ticks 460602439 142194523207 +[2026-05-03 06:52:22.770] [info] [homing.cpp:266] [1885] endstop_name probe tt 1186.3690628589422 trigger_time 1186.3690628589422 move_end_print_time 1186.6222900416667 +[2026-05-03 06:52:22.771] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -402 trig_steps -401 start_pos -103733 trig_pos -104134 halt_pos -104135 +[2026-05-03 06:52:23.708] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.00164999994985 125.99927000006956 -0.13649658759287292 spos -0.13691842558591816 probing_z -0.3069184255858808 +[2026-05-03 06:52:23.709] [info] [gcode.cpp:559] [1885] probe at 198.002,125.999 is z=-0.136497 +[2026-05-03 06:52:23.709] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.44954841699996 +[2026-05-03 06:52:23.710] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.0009200000194 +[2026-05-03 06:52:23.711] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.0023799998803 +[2026-05-03 06:52:23.711] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.6905815744141088 +[2026-05-03 06:52:24.198] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:24.198] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:24.215] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=633907607 trigger_emit_ticks=634291983 +[2026-05-03 06:52:24.217] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 633907607 142367828375 trigger_emit_ticks 634291983 142368212751 +[2026-05-03 06:52:24.218] [info] [homing.cpp:266] [1885] endstop_name probe tt 1187.8164977087897 trigger_time 1187.8164977087897 move_end_print_time 1188.0695684166667 +[2026-05-03 06:52:24.218] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -399 trig_steps -398 start_pos -103735 trig_pos -104133 halt_pos -104134 +[2026-05-03 06:52:25.060] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.00164999994985 125.99927000006954 -0.13624277071624452 spos -0.13691842558591816 probing_z -0.30441842558589116 +[2026-05-03 06:52:25.061] [info] [gcode.cpp:559] [1885] probe at 198.002,125.999 is z=-0.136243 +[2026-05-03 06:52:25.062] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3521061260000806 +[2026-05-03 06:52:25.062] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 198.00164999994982 125.99927000006956 -0.1366718959504115 +[2026-05-03 06:52:25.062] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:52:25.063] [info] [probe.cpp:857] [1885] _move_next 58 probe_points.size 121 + +[2026-05-03 06:52:25.071] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.00295999995626 +[2026-05-03 06:52:25.071] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.00441999987193 +[2026-05-03 06:52:25.071] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744142272 +[2026-05-03 06:52:26.329] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:26.329] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:26.344] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=889653059 trigger_emit_ticks=890037435 +[2026-05-03 06:52:26.346] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 889653059 142623573827 trigger_emit_ticks 890037435 142623958203 +[2026-05-03 06:52:26.347] [info] [homing.cpp:266] [1885] endstop_name probe tt 1189.9477434447128 trigger_time 1189.9477434447128 move_end_print_time 1190.2006146666668 +[2026-05-03 06:52:26.348] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1315 trig_steps -1313 start_pos -102811 trig_pos -104124 halt_pos -104126 +[2026-05-03 06:52:27.230] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 174.0036899999141 125.99927000004217 -0.12420051547772365 spos -0.12441842558581584 probing_z -0.28191842558577296 +[2026-05-03 06:52:27.230] [info] [gcode.cpp:559] [1885] probe at 174.004,125.999 is z=-0.124201 +[2026-05-03 06:52:27.231] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1677417089999835 +[2026-05-03 06:52:27.232] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.00295999995626 +[2026-05-03 06:52:27.232] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.004419999871914 +[2026-05-03 06:52:27.233] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7130815744142169 +[2026-05-03 06:52:27.721] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:27.722] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:27.736] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1056747295 trigger_emit_ticks=1057122295 +[2026-05-03 06:52:27.738] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1056747295 142790668063 trigger_emit_ticks 1057122295 142791043063 +[2026-05-03 06:52:27.739] [info] [homing.cpp:266] [1885] endstop_name probe tt 1191.3401374807936 trigger_time 1191.3401374807936 move_end_print_time 1191.5924190833334 +[2026-05-03 06:52:27.739] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -402 trig_steps -401 start_pos -103726 trig_pos -104127 halt_pos -104128 +[2026-05-03 06:52:28.568] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 174.0036899999141 125.99927000004217 -0.12524465770108834 spos -0.12441842558581584 probing_z -0.289418425585783 +[2026-05-03 06:52:28.568] [info] [gcode.cpp:559] [1885] probe at 174.004,125.999 is z=-0.125245 +[2026-05-03 06:52:28.569] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.33770358400011 +[2026-05-03 06:52:28.570] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:52:28.571] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:52:28.573] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.575] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.577] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.579] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.580] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.582] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.584] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.586] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.587] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.589] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.591] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.593] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.595] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.598] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.599] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.601] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.603] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.605] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.607] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.608] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.610] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.612] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.614] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.616] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.618] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.619] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.622] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.650] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.712] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.774] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.837] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.900] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:28.963] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:29.024] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:29.086] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:29.149] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:29.211] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:29.273] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:29.337] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:29.398] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:52:29.460] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:52:29.461] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.00295999995626 +[2026-05-03 06:52:29.462] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.004419999871914 +[2026-05-03 06:52:29.462] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.7080815744141853 +[2026-05-03 06:52:31.912] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:31.913] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:31.930] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1559612729 trigger_emit_ticks=1559997105 +[2026-05-03 06:52:31.931] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1559612729 143293533497 trigger_emit_ticks 1559997105 143293917873 +[2026-05-03 06:52:31.933] [info] [homing.cpp:266] [1885] endstop_name probe tt 1195.5308194517245 trigger_time 1195.5308194517245 move_end_print_time 1195.7832642916667 +[2026-05-03 06:52:31.933] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -799 trig_steps -798 start_pos -103328 trig_pos -104126 halt_pos -104127 +[2026-05-03 06:52:32.823] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 174.0036899999141 125.99927000004217 -0.12451247359560175 spos -0.12441842558587268 probing_z -0.2869184255858148 +[2026-05-03 06:52:32.823] [info] [gcode.cpp:559] [1885] probe at 174.004,125.999 is z=-0.124512 +[2026-05-03 06:52:32.824] [info] [load_cell_probe.cpp:333] [1885] run_probe time 3.3634737519998907 +[2026-05-03 06:52:32.824] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 174.0036899999141 125.99927000004216 -0.12465254892480458 +[2026-05-03 06:52:32.825] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:52:32.826] [info] [probe.cpp:857] [1885] _move_next 59 probe_points.size 121 + +[2026-05-03 06:52:32.835] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989313 +[2026-05-03 06:52:32.835] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868088 +[2026-05-03 06:52:32.835] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574414304 +[2026-05-03 06:52:34.093] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:34.107] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1821100039 trigger_emit_ticks=1821484413 +[2026-05-03 06:52:34.110] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1821100039 143555020807 trigger_emit_ticks 1821484413 143555405181 +[2026-05-03 06:52:34.112] [info] [homing.cpp:266] [1885] endstop_name probe tt 1197.7099063812057 trigger_time 1197.7099063812057 move_end_print_time 1197.96303825 +[2026-05-03 06:52:34.112] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1317 trig_steps -1314 start_pos -102811 trig_pos -104125 halt_pos -104128 +[2026-05-03 06:52:34.994] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999998806 126.00550000001252 -0.12250695197969946 spos -0.12191842558570443 probing_z -0.2844184255856961 +[2026-05-03 06:52:34.994] [info] [gcode.cpp:559] [1885] probe at 149.999,126.006 is z=-0.122507 +[2026-05-03 06:52:34.995] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1690668339999775 +[2026-05-03 06:52:34.996] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.0049999998931 +[2026-05-03 06:52:34.997] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.99399999986808 +[2026-05-03 06:52:34.997] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7080815744142939 +[2026-05-03 06:52:35.487] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:35.488] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:35.506] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1988938951 +[2026-05-03 06:52:35.520] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1988938951 +[2026-05-03 06:52:35.522] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 141733920768 trigger_emit_ticks 1988938951 143722859719 +[2026-05-03 06:52:35.522] [info] [homing.cpp:266] [1885] endstop_name probe tt 1199.1053771807287 trigger_time 1199.1053771807287 move_end_print_time 1199.358309875 +[2026-05-03 06:52:35.523] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -404 trig_steps -403 start_pos -103728 trig_pos -104131 halt_pos -104132 +[2026-05-03 06:52:36.354] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.99949999988058 126.00550000001249 -0.1241306617406252 spos -0.124418425585759 probing_z -0.2994184255857062 +[2026-05-03 06:52:36.354] [info] [gcode.cpp:559] [1885] probe at 149.999,126.006 is z=-0.124131 +[2026-05-03 06:52:36.355] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3595547920001536 +[2026-05-03 06:52:36.356] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.0049999998931 +[2026-05-03 06:52:36.356] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868095 +[2026-05-03 06:52:36.357] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.6980815744142836 +[2026-05-03 06:52:36.844] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:36.844] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:36.846] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:52:36.860] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=2151800225 +[2026-05-03 06:52:36.862] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 141733920768 trigger_emit_ticks 2151800225 143885720993 +[2026-05-03 06:52:36.863] [info] [homing.cpp:266] [1885] endstop_name probe tt 1200.4625710417488 trigger_time 1200.4625710417488 move_end_print_time 1200.715047 +[2026-05-03 06:52:36.863] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -398 trig_steps -397 start_pos -103732 trig_pos -104129 halt_pos -104130 +[2026-05-03 06:52:37.693] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.99949999988058 126.00550000001249 -0.10926962568849202 spos -0.1094184255857158 probing_z -0.2944184255857164 +[2026-05-03 06:52:37.693] [info] [gcode.cpp:559] [1885] probe at 149.999,126.006 is z=-0.109270 +[2026-05-03 06:52:37.694] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3389891679998982 +[2026-05-03 06:52:37.694] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 149.99949999988058 126.00550000001249 -0.11863574646960556 +[2026-05-03 06:52:37.695] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:52:37.696] [info] [probe.cpp:857] [1885] _move_next 60 probe_points.size 121 + +[2026-05-03 06:52:37.704] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984818 +[2026-05-03 06:52:37.704] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130893026 +[2026-05-03 06:52:37.704] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574414402 +[2026-05-03 06:52:38.958] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:38.959] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:38.973] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2405149617 trigger_emit_ticks=2405533993 +[2026-05-03 06:52:38.975] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2405149617 144139070385 trigger_emit_ticks 2405533993 144139454761 +[2026-05-03 06:52:38.976] [info] [homing.cpp:266] [1885] endstop_name probe tt 1202.5770456163916 trigger_time 1202.5770456163916 move_end_print_time 1202.8289957916666 +[2026-05-03 06:52:38.977] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1309 trig_steps -1308 start_pos -102811 trig_pos -104119 halt_pos -104120 +[2026-05-03 06:52:39.860] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 125.99530999985865 125.99926999998954 -0.09054065354980387 spos -0.0894184255856203 probing_z -0.2694184255855978 +[2026-05-03 06:52:39.860] [info] [gcode.cpp:559] [1885] probe at 125.995,125.999 is z=-0.090541 +[2026-05-03 06:52:39.861] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.164986167999814 +[2026-05-03 06:52:39.862] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984816 +[2026-05-03 06:52:39.862] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130902586 +[2026-05-03 06:52:39.863] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.728081574414392 +[2026-05-03 06:52:40.345] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:40.345] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:40.363] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2571553949 trigger_emit_ticks=2571938325 +[2026-05-03 06:52:40.377] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2571553949 trigger_emit_ticks=2571938325 +[2026-05-03 06:52:40.378] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2571553949 144305474717 trigger_emit_ticks 2571938325 144305859093 +[2026-05-03 06:52:40.379] [info] [homing.cpp:266] [1885] endstop_name probe tt 1203.9637666513331 trigger_time 1203.9637666513331 move_end_print_time 1204.216050125 +[2026-05-03 06:52:40.379] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -390 trig_steps -388 start_pos -103720 trig_pos -104108 halt_pos -104110 +[2026-05-03 06:52:40.658] [info] [heaters.cpp:405] [1955] __func__:temperature_callback,heater_name:heater_bed,read_time:1204.27800000038,last_temp:59.92049381095251,temp:59.92049381095251,target_temp:60,smoothed_temp:59.93790328514491 +[2026-05-03 06:52:41.310] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 125.99530999985862 125.99926999998954 -0.06335584284766713 spos -0.06441842558564304 probing_z -0.24191842558560794 +[2026-05-03 06:52:41.311] [info] [gcode.cpp:559] [1885] probe at 125.995,125.999 is z=-0.063356 +[2026-05-03 06:52:41.312] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.450163750999991 +[2026-05-03 06:52:41.313] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984816 +[2026-05-03 06:52:41.313] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130931007 +[2026-05-03 06:52:41.314] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7530815744143817 +[2026-05-03 06:52:41.800] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:41.801] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:41.822] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2746092409 trigger_emit_ticks=2746476783 +[2026-05-03 06:52:41.824] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2746092409 144480013177 trigger_emit_ticks 2746476783 144480397551 +[2026-05-03 06:52:41.825] [info] [homing.cpp:266] [1885] endstop_name probe tt 1205.4182755081708 trigger_time 1205.4182755081708 move_end_print_time 1205.6709249583334 +[2026-05-03 06:52:41.825] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -396 trig_steps -395 start_pos -103710 trig_pos -104105 halt_pos -104106 +[2026-05-03 06:52:42.757] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 125.99530999985862 125.99926999998954 -0.06436090990001528 spos -0.06441842558564304 probing_z -0.23441842558561832 +[2026-05-03 06:52:42.757] [info] [gcode.cpp:559] [1885] probe at 125.995,125.999 is z=-0.064361 +[2026-05-03 06:52:42.758] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4462618759998804 +[2026-05-03 06:52:42.758] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 125.99530999985863 125.99926999998952 -0.07275246876582876 +[2026-05-03 06:52:42.759] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:52:42.759] [info] [probe.cpp:857] [1885] _move_next 61 probe_points.size 121 + +[2026-05-03 06:52:42.768] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998945 +[2026-05-03 06:52:42.768] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129918 +[2026-05-03 06:52:42.768] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744145012 +[2026-05-03 06:52:42.813] [info] [heaters.cpp:405] [1963] __func__:temperature_callback,heater_name:extruder,read_time:1206.4321821786016,last_temp:139.2597722612195,temp:139.2597722612195,target_temp:140,smoothed_temp:139.4548930102477 +[2026-05-03 06:52:44.013] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:44.013] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:44.028] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3011698541 trigger_emit_ticks=3012082917 +[2026-05-03 06:52:44.029] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3011698541 144745619309 trigger_emit_ticks 3012082917 144746003685 +[2026-05-03 06:52:44.030] [info] [homing.cpp:266] [1885] endstop_name probe tt 1207.631671380175 trigger_time 1207.631671380175 move_end_print_time 1207.8840363333334 +[2026-05-03 06:52:44.031] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1296 trig_steps -1295 start_pos -102811 trig_pos -104106 halt_pos -104107 +[2026-05-03 06:52:44.915] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999988229 125.99927000001222 -0.07351320383906487 spos -0.07441842558552025 probing_z -0.23691842558549903 +[2026-05-03 06:52:44.915] [info] [gcode.cpp:559] [1885] probe at 101.997,125.999 is z=-0.073513 +[2026-05-03 06:52:44.916] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1557847920000768 +[2026-05-03 06:52:44.917] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998945 +[2026-05-03 06:52:44.917] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129928 +[2026-05-03 06:52:44.917] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7605815744144906 +[2026-05-03 06:52:45.409] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:45.409] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:45.429] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3179627679 +[2026-05-03 06:52:45.430] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 146028888064 trigger_emit_ticks 3179627679 144913548447 +[2026-05-03 06:52:45.431] [info] [homing.cpp:266] [1885] endstop_name probe tt 1209.0278906157366 trigger_time 1209.0278906157366 move_end_print_time 1209.280800125 +[2026-05-03 06:52:45.431] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -408 trig_steps -406 start_pos -103707 trig_pos -104113 halt_pos -104115 +[2026-05-03 06:52:46.359] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999988229 125.99927000001222 -0.07737978806530973 spos -0.07691842558551798 probing_z -0.25441842558550953 +[2026-05-03 06:52:46.359] [info] [gcode.cpp:559] [1885] probe at 101.997,125.999 is z=-0.077380 +[2026-05-03 06:52:46.360] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4439207919999717 +[2026-05-03 06:52:46.361] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998945 +[2026-05-03 06:52:46.361] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129928 +[2026-05-03 06:52:46.361] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7405815744144804 +[2026-05-03 06:52:46.849] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:46.849] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:46.864] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3351973089 trigger_emit_ticks=3352357463 +[2026-05-03 06:52:46.866] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3351973089 145085893857 trigger_emit_ticks 3352357463 145086278231 +[2026-05-03 06:52:46.867] [info] [homing.cpp:266] [1885] endstop_name probe tt 1210.4673224229205 trigger_time 1210.4673224229205 move_end_print_time 1210.72064925 +[2026-05-03 06:52:46.867] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -397 trig_steps -395 start_pos -103715 trig_pos -104110 halt_pos -104112 +[2026-05-03 06:52:47.696] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999988229 125.99927000001222 -0.07781106341448493 spos -0.07691842558551798 probing_z -0.24691842558551969 +[2026-05-03 06:52:47.696] [info] [gcode.cpp:559] [1885] probe at 101.997,125.999 is z=-0.077811 +[2026-05-03 06:52:47.697] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3371508340001128 +[2026-05-03 06:52:47.697] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 101.99734999988227 125.99927000001223 -0.07623468510628652 +[2026-05-03 06:52:47.698] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:52:47.698] [info] [probe.cpp:857] [1885] _move_next 62 probe_points.size 121 + +[2026-05-03 06:52:47.707] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994086 +[2026-05-03 06:52:47.707] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013376 +[2026-05-03 06:52:47.707] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744146 +[2026-05-03 06:52:48.948] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:48.948] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:48.965] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3603876177 trigger_emit_ticks=3604260553 +[2026-05-03 06:52:48.966] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3603876177 145337796945 trigger_emit_ticks 3604260553 145338181321 +[2026-05-03 06:52:48.967] [info] [homing.cpp:266] [1885] endstop_name probe tt 1212.5665467637862 trigger_time 1212.5665467637862 move_end_print_time 1212.818863 +[2026-05-03 06:52:48.967] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1286 trig_steps -1285 start_pos -102811 trig_pos -104096 halt_pos -104097 +[2026-05-03 06:52:49.850] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999990354 125.99927000003731 -0.04467366662753222 spos -0.04441842558537701 probing_z -0.21191842558540008 +[2026-05-03 06:52:49.851] [info] [gcode.cpp:559] [1885] probe at 77.999,125.999 is z=-0.044674 +[2026-05-03 06:52:49.851] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1522241669999858 +[2026-05-03 06:52:49.853] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994086 +[2026-05-03 06:52:49.853] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013377 +[2026-05-03 06:52:49.853] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.785581574414589 +[2026-05-03 06:52:50.342] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:50.343] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:50.358] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3771148057 trigger_emit_ticks=3771532433 +[2026-05-03 06:52:50.360] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3771148057 145505068825 trigger_emit_ticks 3771532433 145505453201 +[2026-05-03 06:52:50.361] [info] [homing.cpp:266] [1885] endstop_name probe tt 1213.9604984909984 trigger_time 1213.9604984909984 move_end_print_time 1214.2125720833333 +[2026-05-03 06:52:50.361] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -402 trig_steps -401 start_pos -103697 trig_pos -104098 halt_pos -104099 +[2026-05-03 06:52:51.241] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999990354 125.99927000003731 -0.048058271756192456 spos -0.046918425585374735 probing_z -0.21691842558541097 +[2026-05-03 06:52:51.241] [info] [gcode.cpp:559] [1885] probe at 77.999,125.999 is z=-0.048058 +[2026-05-03 06:52:51.242] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3907733339999595 +[2026-05-03 06:52:51.243] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994086 +[2026-05-03 06:52:51.243] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013377 +[2026-05-03 06:52:51.244] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.780581574414578 +[2026-05-03 06:52:51.737] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:51.737] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:51.752] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3938514297 trigger_emit_ticks=3938898671 +[2026-05-03 06:52:51.754] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3938514297 145672435065 trigger_emit_ticks 3938898671 145672819439 +[2026-05-03 06:52:51.755] [info] [homing.cpp:266] [1885] endstop_name probe tt 1215.3552371786336 trigger_time 1215.3552371786336 move_end_print_time 1215.60757025 +[2026-05-03 06:52:51.755] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -405 trig_steps -404 start_pos -103699 trig_pos -104103 halt_pos -104104 +[2026-05-03 06:52:52.592] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999990354 125.99927000003731 -0.049027376195194344 spos -0.049418425585429304 probing_z -0.22941842558542203 +[2026-05-03 06:52:52.593] [info] [gcode.cpp:559] [1885] probe at 77.999,125.999 is z=-0.049027 +[2026-05-03 06:52:52.594] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3510673759999463 +[2026-05-03 06:52:52.594] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 77.99938999990354 125.99927000003731 -0.047253104859639676 +[2026-05-03 06:52:52.594] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:52:52.595] [info] [probe.cpp:857] [1885] _move_next 63 probe_points.size 121 + +[2026-05-03 06:52:52.604] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.0006999999872 +[2026-05-03 06:52:52.604] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014216 +[2026-05-03 06:52:52.604] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744146975 +[2026-05-03 06:52:53.841] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:53.841] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:53.855] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=4191275109 +[2026-05-03 06:52:53.857] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 146028888064 trigger_emit_ticks 4191275109 145925195877 +[2026-05-03 06:52:53.858] [info] [homing.cpp:266] [1885] endstop_name probe tt 1217.45840403742 trigger_time 1217.45840403742 move_end_print_time 1217.711773125 +[2026-05-03 06:52:53.858] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1279 trig_steps -1277 start_pos -102811 trig_pos -104088 halt_pos -104090 +[2026-05-03 06:52:54.548] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.00142999992252 125.99927000006468 -0.018055548122377613 spos -0.016918425585288333 probing_z -0.19191842558530237 +[2026-05-03 06:52:54.549] [info] [gcode.cpp:559] [1885] probe at 54.001,125.999 is z=-0.018056 +[2026-05-03 06:52:54.550] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9540875430000142 +[2026-05-03 06:52:54.551] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.0006999999872 +[2026-05-03 06:52:54.551] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014216 +[2026-05-03 06:52:54.551] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8030815744146859 +[2026-05-03 06:52:55.042] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:55.042] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:55.058] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=40557810 +[2026-05-03 06:52:55.059] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 146028888064 trigger_emit_ticks 40557810 146069445874 +[2026-05-03 06:52:55.061] [info] [homing.cpp:266] [1885] endstop_name probe tt 1218.660504489174 trigger_time 1218.660504489174 move_end_print_time 1218.912808625 +[2026-05-03 06:52:55.062] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -404 start_pos -103690 trig_pos -104094 halt_pos -104096 +[2026-05-03 06:52:55.999] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.00142999992252 125.99927000006468 -0.026711808985579427 spos -0.02691842558533608 probing_z -0.20691842558531415 +[2026-05-03 06:52:56.001] [info] [gcode.cpp:559] [1885] probe at 54.001,125.999 is z=-0.026712 +[2026-05-03 06:52:56.002] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.452024917000017 +[2026-05-03 06:52:56.003] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.0006999999872 +[2026-05-03 06:52:56.003] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014216 +[2026-05-03 06:52:56.004] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7880815744146746 +[2026-05-03 06:52:56.488] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:56.489] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:56.505] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=213775961 trigger_emit_ticks=214160335 +[2026-05-03 06:52:56.509] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 213775961 146242664025 trigger_emit_ticks 214160335 146243048399 +[2026-05-03 06:52:56.510] [info] [homing.cpp:266] [1885] endstop_name probe tt 1220.1072125905991 trigger_time 1220.1072125905991 move_end_print_time 1220.359736125 +[2026-05-03 06:52:56.510] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -394 trig_steps -393 start_pos -103696 trig_pos -104089 halt_pos -104090 +[2026-05-03 06:52:57.350] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.00142999992252 125.99927000006468 -0.023751216050821505 spos -0.024418425585338355 probing_z -0.1944184255853254 +[2026-05-03 06:52:57.350] [info] [gcode.cpp:559] [1885] probe at 54.001,125.999 is z=-0.023751 +[2026-05-03 06:52:57.351] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3487855010000658 +[2026-05-03 06:52:57.351] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 54.00142999992252 125.99927000006467 -0.022839524386259514 +[2026-05-03 06:52:57.352] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:52:57.353] [info] [probe.cpp:857] [1885] _move_next 64 probe_points.size 121 + +[2026-05-03 06:52:57.361] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.00274000003355 +[2026-05-03 06:52:57.362] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015055 +[2026-05-03 06:52:57.362] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744147943 +[2026-05-03 06:52:58.595] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:58.598] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:58.598] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:52:58.612] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=466560589 trigger_emit_ticks=466944963 +[2026-05-03 06:52:58.613] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 466560589 146495448653 trigger_emit_ticks 466944963 146495833027 +[2026-05-03 06:52:58.615] [info] [homing.cpp:266] [1885] endstop_name probe tt 1222.213780698496 trigger_time 1222.213780698496 move_end_print_time 1222.46678075 +[2026-05-03 06:52:58.615] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1278 trig_steps -1276 start_pos -102811 trig_pos -104087 halt_pos -104089 +[2026-05-03 06:52:59.356] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 30.0034699999415 125.99927000009205 -0.009741296693507068 spos -0.009418425585181467 probing_z -0.1894184255852056 +[2026-05-03 06:52:59.357] [info] [gcode.cpp:559] [1885] probe at 30.003,125.999 is z=-0.009741 +[2026-05-03 06:52:59.358] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.0042639170001166 +[2026-05-03 06:52:59.359] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.00274000003353 +[2026-05-03 06:52:59.359] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015054 +[2026-05-03 06:52:59.359] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8055815744147826 +[2026-05-03 06:52:59.851] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:52:59.852] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:52:59.869] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=617239927 trigger_emit_ticks=617624303 +[2026-05-03 06:52:59.873] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 617239927 146646127991 trigger_emit_ticks 617624303 146646512367 +[2026-05-03 06:52:59.874] [info] [homing.cpp:266] [1885] endstop_name probe tt 1223.4694585079997 trigger_time 1223.4694585079997 move_end_print_time 1223.7227134166667 +[2026-05-03 06:52:59.874] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -408 trig_steps -407 start_pos -103689 trig_pos -104096 halt_pos -104097 +[2026-05-03 06:53:00.808] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 30.003469999941494 125.99927000009203 -0.011896163275795985 spos -0.011918425585236037 probing_z -0.21191842558521745 +[2026-05-03 06:53:00.809] [info] [gcode.cpp:559] [1885] probe at 30.003,125.999 is z=-0.011896 +[2026-05-03 06:53:00.810] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.451867959000083 +[2026-05-03 06:53:00.811] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.00274000003353 +[2026-05-03 06:53:00.811] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015054 +[2026-05-03 06:53:00.811] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7855815744147716 +[2026-05-03 06:53:01.299] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:01.299] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:01.315] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=791016413 trigger_emit_ticks=791400789 +[2026-05-03 06:53:01.317] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 791016413 146819904477 trigger_emit_ticks 791400789 146820288853 +[2026-05-03 06:53:01.318] [info] [homing.cpp:266] [1885] endstop_name probe tt 1224.9176150857036 trigger_time 1224.9176150857036 move_end_print_time 1225.1696174583333 +[2026-05-03 06:53:01.318] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -398 start_pos -103697 trig_pos -104095 halt_pos -104097 +[2026-05-03 06:53:02.158] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 30.003469999941494 125.99927000009203 -0.0127548041727292 spos -0.011918425585236037 probing_z -0.20941842558522838 +[2026-05-03 06:53:02.159] [info] [gcode.cpp:559] [1885] probe at 30.003,125.999 is z=-0.012755 +[2026-05-03 06:53:02.159] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3495478340000773 +[2026-05-03 06:53:02.160] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 30.003469999941498 125.99927000009204 -0.011464088047344084 +[2026-05-03 06:53:02.160] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:53:02.161] [info] [probe.cpp:857] [1885] _move_next 65 probe_points.size 121 + +[2026-05-03 06:53:02.171] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.00478000007988 +[2026-05-03 06:53:02.172] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015893 +[2026-05-03 06:53:02.172] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574414891 +[2026-05-03 06:53:03.414] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:03.414] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:03.428] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1044535414 trigger_emit_ticks=1044919767 +[2026-05-03 06:53:03.430] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1044535414 147073423478 trigger_emit_ticks 1044919767 147073807831 +[2026-05-03 06:53:03.430] [info] [homing.cpp:266] [1885] endstop_name probe tt 1227.0303018951058 trigger_time 1227.0303018951058 move_end_print_time 1227.284575875 +[2026-05-03 06:53:03.431] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1296 trig_steps -1290 start_pos -102811 trig_pos -104101 halt_pos -104107 +[2026-05-03 06:53:04.368] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999960471 126.00550000011941 -0.024295540892526696 spos -0.02441842558511098 probing_z -0.22441842558510894 +[2026-05-03 06:53:04.368] [info] [gcode.cpp:559] [1885] probe at 5.999,126.006 is z=-0.024296 +[2026-05-03 06:53:04.369] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.207256292000011 +[2026-05-03 06:53:04.370] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.00478000007988 +[2026-05-03 06:53:04.370] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015895 +[2026-05-03 06:53:04.370] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7605815744148805 +[2026-05-03 06:53:04.862] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:04.862] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:04.877] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1218414413 trigger_emit_ticks=1218798787 +[2026-05-03 06:53:04.878] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1218414413 147247302477 trigger_emit_ticks 1218798787 147247686851 +[2026-05-03 06:53:04.879] [info] [homing.cpp:266] [1885] endstop_name probe tt 1228.4793142153837 trigger_time 1228.4793142153837 move_end_print_time 1228.7325902916666 +[2026-05-03 06:53:04.880] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -403 start_pos -103707 trig_pos -104110 halt_pos -104113 +[2026-05-03 06:53:05.716] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999960464 126.00550000011941 -0.019711313822283055 spos -0.01941842558511553 probing_z -0.24691842558511956 +[2026-05-03 06:53:05.716] [info] [gcode.cpp:559] [1885] probe at 5.999,126.006 is z=-0.019711 +[2026-05-03 06:53:05.717] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.347765334000087 +[2026-05-03 06:53:05.718] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:53:05.719] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:53:05.720] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.722] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.724] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.726] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.727] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.729] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.731] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.733] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.734] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.736] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.737] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.739] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.741] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.742] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.744] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.746] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.747] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.749] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.751] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.753] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.754] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.756] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.757] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.759] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.760] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.762] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.763] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.797] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.860] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.922] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:05.984] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:06.047] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:06.109] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:06.172] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:06.234] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:06.296] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:06.359] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:06.420] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:06.483] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:06.545] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:06.608] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:53:06.609] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 132.00478000007988 +[2026-05-03 06:53:06.609] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015895 +[2026-05-03 06:53:06.609] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.7455815744148488 +[2026-05-03 06:53:09.057] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:09.072] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1721933405 trigger_emit_ticks=1722308405 +[2026-05-03 06:53:09.074] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1721933405 147750821469 trigger_emit_ticks 1722308405 147751196469 +[2026-05-03 06:53:09.075] [info] [homing.cpp:266] [1885] endstop_name probe tt 1232.6752839410337 trigger_time 1232.6752839410337 move_end_print_time 1232.9274528333333 +[2026-05-03 06:53:09.075] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -793 trig_steps -792 start_pos -103313 trig_pos -104105 halt_pos -104106 +[2026-05-03 06:53:09.967] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999960464 126.00550000011941 -0.02876631137841909 spos -0.029418425585163277 probing_z -0.23441842558515114 +[2026-05-03 06:53:09.967] [info] [gcode.cpp:559] [1885] probe at 5.999,126.006 is z=-0.028766 +[2026-05-03 06:53:09.968] [info] [load_cell_probe.cpp:333] [1885] run_probe time 3.3596838349999416 +[2026-05-03 06:53:09.968] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 5.999279999960467 126.00550000011941 -0.02425772203107628 +[2026-05-03 06:53:09.969] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:53:09.969] [info] [probe.cpp:857] [1885] _move_next 66 probe_points.size 121 + +[2026-05-03 06:53:09.978] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.00274000003353 +[2026-05-03 06:53:09.978] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -144.00418000013084 +[2026-05-03 06:53:09.978] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744149684 +[2026-05-03 06:53:11.230] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:11.230] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:11.245] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1982551843 trigger_emit_ticks=1982936217 +[2026-05-03 06:53:11.257] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1982551843 trigger_emit_ticks=1982936217 +[2026-05-03 06:53:11.259] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1982551843 148011439907 trigger_emit_ticks 1982936217 148011824281 +[2026-05-03 06:53:11.261] [info] [homing.cpp:266] [1885] endstop_name probe tt 1234.8472046340396 trigger_time 1234.8472046340396 move_end_print_time 1235.1007741666667 +[2026-05-03 06:53:11.261] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1307 trig_steps -1306 start_pos -102811 trig_pos -104117 halt_pos -104118 +[2026-05-03 06:53:12.150] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999951341 150.00346000008219 -0.04866630532064417 spos -0.04941842558497456 probing_z -0.2644184255850317 +[2026-05-03 06:53:12.151] [info] [gcode.cpp:559] [1885] probe at 5.999,150.003 is z=-0.048666 +[2026-05-03 06:53:12.152] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.181685168000058 +[2026-05-03 06:53:12.153] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.00274000003353 +[2026-05-03 06:53:12.153] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -144.00418000013084 +[2026-05-03 06:53:12.153] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7330815744149581 +[2026-05-03 06:53:12.644] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:12.645] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:12.661] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2152302381 trigger_emit_ticks=2152677381 +[2026-05-03 06:53:12.663] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2152302381 148181190445 trigger_emit_ticks 2152677381 148181565445 +[2026-05-03 06:53:12.665] [info] [homing.cpp:266] [1885] endstop_name probe tt 1236.2617311106424 trigger_time 1236.2617311106424 move_end_print_time 1236.51616875 +[2026-05-03 06:53:12.665] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -402 start_pos -103718 trig_pos -104120 halt_pos -104125 +[2026-05-03 06:53:13.594] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999951341 150.00346000008219 -0.05174600452872852 spos -0.051918425585029127 probing_z -0.271918425585042 +[2026-05-03 06:53:13.595] [info] [gcode.cpp:559] [1885] probe at 5.999,150.003 is z=-0.051746 +[2026-05-03 06:53:13.595] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4434659169999122 +[2026-05-03 06:53:13.597] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 156.00274000003353 +[2026-05-03 06:53:13.597] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -144.00418000013084 +[2026-05-03 06:53:13.597] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7155815744149479 +[2026-05-03 06:53:14.097] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:14.097] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:14.125] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2326642183 trigger_emit_ticks=2327026559 +[2026-05-03 06:53:14.129] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2326642183 148355530247 trigger_emit_ticks 2327026559 148355914623 +[2026-05-03 06:53:14.130] [info] [homing.cpp:266] [1885] endstop_name probe tt 1237.7146597406806 trigger_time 1237.7146597406806 move_end_print_time 1237.9680417916666 +[2026-05-03 06:53:14.130] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -397 start_pos -103725 trig_pos -104122 halt_pos -104125 +[2026-05-03 06:53:15.061] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999951341 150.00346000008219 -0.05143391913411305 spos -0.051918425585029127 probing_z -0.2769184255850522 +[2026-05-03 06:53:15.061] [info] [gcode.cpp:559] [1885] probe at 5.999,150.003 is z=-0.051434 +[2026-05-03 06:53:15.062] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4663045839999995 +[2026-05-03 06:53:15.062] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 5.999279999951341 150.00346000008219 -0.05061540966116191 +[2026-05-03 06:53:15.062] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:53:15.063] [info] [probe.cpp:857] [1885] _move_next 67 probe_points.size 121 + +[2026-05-03 06:53:15.071] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.00069999998718 +[2026-05-03 06:53:15.071] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015895 +[2026-05-03 06:53:15.071] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744150666 +[2026-05-03 06:53:16.317] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:16.317] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:16.332] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2593099327 trigger_emit_ticks=2593474327 +[2026-05-03 06:53:16.334] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2593099327 148621987391 trigger_emit_ticks 2593474327 148622362391 +[2026-05-03 06:53:16.334] [info] [homing.cpp:266] [1885] endstop_name probe tt 1239.9350888966665 trigger_time 1239.9350888966665 move_end_print_time 1240.1878797916668 +[2026-05-03 06:53:16.335] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1291 trig_steps -1290 start_pos -102811 trig_pos -104101 halt_pos -104102 +[2026-05-03 06:53:17.216] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999914115 150.00346000007306 -0.03526195693511666 spos -0.034418425584931356 probing_z -0.22441842558493352 +[2026-05-03 06:53:17.217] [info] [gcode.cpp:559] [1885] probe at 29.997,150.003 is z=-0.035262 +[2026-05-03 06:53:17.217] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1535340010000255 +[2026-05-03 06:53:17.218] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.00069999998718 +[2026-05-03 06:53:17.218] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015895 +[2026-05-03 06:53:17.219] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7730815744150558 +[2026-05-03 06:53:17.710] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:17.709] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:17.725] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2760257417 trigger_emit_ticks=2760632440 +[2026-05-03 06:53:17.727] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2760257417 148789145481 trigger_emit_ticks 2760632440 148789520504 +[2026-05-03 06:53:17.729] [info] [homing.cpp:266] [1885] endstop_name probe tt 1241.3280922061228 trigger_time 1241.3280922061228 move_end_print_time 1241.5804581666666 +[2026-05-03 06:53:17.730] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -404 start_pos -103702 trig_pos -104106 halt_pos -104108 +[2026-05-03 06:53:18.559] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999914115 150.00346000007306 -0.03259145948636552 spos -0.03191842558499047 probing_z -0.23691842558494425 +[2026-05-03 06:53:18.560] [info] [gcode.cpp:559] [1885] probe at 29.997,150.003 is z=-0.032591 +[2026-05-03 06:53:18.561] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3438372919999892 +[2026-05-03 06:53:18.562] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.00069999998718 +[2026-05-03 06:53:18.563] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015895 +[2026-05-03 06:53:18.563] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7580815744150452 +[2026-05-03 06:53:19.052] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:19.067] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2921372615 trigger_emit_ticks=2921756991 +[2026-05-03 06:53:19.069] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2921372615 148950260679 trigger_emit_ticks 2921756991 148950645055 +[2026-05-03 06:53:19.070] [info] [homing.cpp:266] [1885] endstop_name probe tt 1242.6708147499755 trigger_time 1242.6708147499755 move_end_print_time 1242.9230872916667 +[2026-05-03 06:53:19.071] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -399 trig_steps -397 start_pos -103708 trig_pos -104105 halt_pos -104107 +[2026-05-03 06:53:19.902] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999914115 150.00346000007306 -0.03408590997289215 spos -0.0344184255849882 probing_z -0.23441842558495485 +[2026-05-03 06:53:19.902] [info] [gcode.cpp:559] [1885] probe at 29.997,150.003 is z=-0.034086 +[2026-05-03 06:53:19.903] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3416615000001002 +[2026-05-03 06:53:19.903] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 29.997239999914115 150.00346000007306 -0.033979775464791445 +[2026-05-03 06:53:19.904] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:53:19.904] [info] [probe.cpp:857] [1885] _move_next 68 probe_points.size 121 + +[2026-05-03 06:53:19.913] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994083 +[2026-05-03 06:53:19.914] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015055 +[2026-05-03 06:53:19.914] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744151647 +[2026-05-03 06:53:21.153] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:21.153] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:21.167] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3173463066 trigger_emit_ticks=3173847557 +[2026-05-03 06:53:21.171] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3173463066 149202351130 trigger_emit_ticks 3173847557 149202735621 +[2026-05-03 06:53:21.172] [info] [homing.cpp:266] [1885] endstop_name probe tt 1244.7715973496738 trigger_time 1244.7715973496738 move_end_print_time 1245.0241 +[2026-05-03 06:53:21.173] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1285 trig_steps -1284 start_pos -102811 trig_pos -104095 halt_pos -104096 +[2026-05-03 06:53:22.104] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.00142999989514 149.9972300000457 -0.031535626387539456 spos -0.03191842558481994 probing_z -0.20941842558483525 +[2026-05-03 06:53:22.104] [info] [gcode.cpp:559] [1885] probe at 54.001,149.997 is z=-0.031536 +[2026-05-03 06:53:22.105] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.200074208999922 +[2026-05-03 06:53:22.106] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994086 +[2026-05-03 06:53:22.106] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015057 +[2026-05-03 06:53:22.107] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7880815744151537 +[2026-05-03 06:53:22.614] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:22.615] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:22.640] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3348673555 trigger_emit_ticks=3349057929 +[2026-05-03 06:53:22.642] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3348673555 149377561619 trigger_emit_ticks 3349057929 149377945993 +[2026-05-03 06:53:22.645] [info] [homing.cpp:266] [1885] endstop_name probe tt 1246.231704164709 trigger_time 1246.231704164709 move_end_print_time 1246.4948209583333 +[2026-05-03 06:53:22.646] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -410 trig_steps -408 start_pos -103696 trig_pos -104104 halt_pos -104106 +[2026-05-03 06:53:23.577] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.001429999895144 149.9972300000457 -0.032709139803465764 spos -0.031918425584876786 probing_z -0.23191842558484632 +[2026-05-03 06:53:23.577] [info] [gcode.cpp:559] [1885] probe at 54.001,149.997 is z=-0.032709 +[2026-05-03 06:53:23.578] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4729663759999312 +[2026-05-03 06:53:23.579] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994086 +[2026-05-03 06:53:23.579] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015057 +[2026-05-03 06:53:23.580] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7630815744151432 +[2026-05-03 06:53:24.067] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:24.067] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:24.083] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3523117661 trigger_emit_ticks=3523502035 +[2026-05-03 06:53:24.084] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3523117661 149552005725 trigger_emit_ticks 3523502035 149552390099 +[2026-05-03 06:53:24.085] [info] [homing.cpp:266] [1885] endstop_name probe tt 1247.6854275654043 trigger_time 1247.6854275654043 move_end_print_time 1247.9379861666666 +[2026-05-03 06:53:24.085] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -396 trig_steps -394 start_pos -103706 trig_pos -104100 halt_pos -104102 +[2026-05-03 06:53:24.914] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.001429999895144 149.9972300000457 -0.031261863832208275 spos -0.031918425584876786 probing_z -0.22191842558485675 +[2026-05-03 06:53:24.915] [info] [gcode.cpp:559] [1885] probe at 54.001,149.997 is z=-0.031262 +[2026-05-03 06:53:24.916] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3372366250000596 +[2026-05-03 06:53:24.916] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 54.001429999895144 149.9972300000457 -0.031835543341071165 +[2026-05-03 06:53:24.916] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:53:24.917] [info] [probe.cpp:857] [1885] _move_next 69 probe_points.size 121 + +[2026-05-03 06:53:24.925] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998945 +[2026-05-03 06:53:24.925] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014218 +[2026-05-03 06:53:24.925] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574415263 +[2026-05-03 06:53:26.169] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:26.169] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:26.186] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3775574965 +[2026-05-03 06:53:26.188] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 150323855360 trigger_emit_ticks 3775574965 149804463029 +[2026-05-03 06:53:26.189] [info] [homing.cpp:266] [1885] endstop_name probe tt 1249.7860709200281 trigger_time 1249.7860709200281 move_end_print_time 1250.03961425 +[2026-05-03 06:53:26.189] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1292 trig_steps -1289 start_pos -102811 trig_pos -104100 halt_pos -104103 +[2026-05-03 06:53:27.071] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999987617 149.99723000001833 -0.05440250532025989 spos -0.054418425584742636 probing_z -0.2219184255847373 +[2026-05-03 06:53:27.071] [info] [gcode.cpp:559] [1885] probe at 77.999,149.997 is z=-0.054403 +[2026-05-03 06:53:27.072] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1544706260001476 +[2026-05-03 06:53:27.073] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998945 +[2026-05-03 06:53:27.073] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014216 +[2026-05-03 06:53:27.074] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7705815744152522 +[2026-05-03 06:53:27.566] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:27.566] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:27.581] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3943022173 trigger_emit_ticks=3943406547 +[2026-05-03 06:53:27.583] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3943022173 149971910237 trigger_emit_ticks 3943406547 149972294611 +[2026-05-03 06:53:27.585] [info] [homing.cpp:266] [1885] endstop_name probe tt 1251.18468958277 trigger_time 1251.18468958277 move_end_print_time 1251.436488875 +[2026-05-03 06:53:27.585] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -408 trig_steps -407 start_pos -103703 trig_pos -104110 halt_pos -104111 +[2026-05-03 06:53:28.516] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999987617 149.99723000001833 -0.05754844219909791 spos -0.05691842558468352 probing_z -0.24691842558474786 +[2026-05-03 06:53:28.516] [info] [gcode.cpp:559] [1885] probe at 77.999,149.997 is z=-0.057548 +[2026-05-03 06:53:28.517] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4448318760000802 +[2026-05-03 06:53:28.518] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998945 +[2026-05-03 06:53:28.518] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014216 +[2026-05-03 06:53:28.518] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.750581574415242 +[2026-05-03 06:53:29.006] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:29.007] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:29.021] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4115832297 trigger_emit_ticks=4116216671 +[2026-05-03 06:53:29.023] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4115832297 150144720361 trigger_emit_ticks 4116216671 150145104735 +[2026-05-03 06:53:29.024] [info] [homing.cpp:266] [1885] endstop_name probe tt 1252.6247968954162 trigger_time 1252.6247968954162 move_end_print_time 1252.8775451666668 +[2026-05-03 06:53:29.024] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -398 trig_steps -397 start_pos -103711 trig_pos -104108 halt_pos -104109 +[2026-05-03 06:53:29.909] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999987617 149.99723000001833 -0.05495232740434805 spos -0.054418425584742636 probing_z -0.24191842558475807 +[2026-05-03 06:53:29.909] [info] [gcode.cpp:559] [1885] probe at 77.999,149.997 is z=-0.054952 +[2026-05-03 06:53:29.911] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3933294170001318 +[2026-05-03 06:53:29.911] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 77.99938999987617 149.99723000001833 -0.055634424974568615 +[2026-05-03 06:53:29.911] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:53:29.913] [info] [probe.cpp:857] [1885] _move_next 70 probe_points.size 121 + +[2026-05-03 06:53:29.921] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984816 +[2026-05-03 06:53:29.922] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013377 +[2026-05-03 06:53:29.922] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744153614 +[2026-05-03 06:53:31.165] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:31.165] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:31.180] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=79930423 trigger_emit_ticks=80314797 +[2026-05-03 06:53:31.182] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 79930423 150403785783 trigger_emit_ticks 80314797 150404170157 +[2026-05-03 06:53:31.183] [info] [homing.cpp:266] [1885] endstop_name probe tt 1254.7837072080902 trigger_time 1254.7837072080902 move_end_print_time 1255.0361344583334 +[2026-05-03 06:53:31.183] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1292 trig_steps -1291 start_pos -102811 trig_pos -104102 halt_pos -104103 +[2026-05-03 06:53:32.114] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999985719 149.99722999999096 -0.05638461464278685 spos -0.056918425584626675 probing_z -0.2269184255846386 +[2026-05-03 06:53:32.115] [info] [gcode.cpp:559] [1885] probe at 101.997,149.997 is z=-0.056385 +[2026-05-03 06:53:32.115] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.2020490009999776 +[2026-05-03 06:53:32.117] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984816 +[2026-05-03 06:53:32.117] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013377 +[2026-05-03 06:53:32.117] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7705815744153508 +[2026-05-03 06:53:32.608] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:32.608] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:32.638] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=253021459 trigger_emit_ticks=253405858 +[2026-05-03 06:53:32.640] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 253021459 150576876819 trigger_emit_ticks 253405858 150577261218 +[2026-05-03 06:53:32.642] [info] [homing.cpp:266] [1885] endstop_name probe tt 1256.2261528707202 trigger_time 1256.2261528707202 move_end_print_time 1256.4784256666667 +[2026-05-03 06:53:32.642] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -404 start_pos -103703 trig_pos -104107 halt_pos -104110 +[2026-05-03 06:53:33.470] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999985719 149.99722999999096 -0.06383653682997179 spos -0.0644184255846767 probing_z -0.2394184255846492 +[2026-05-03 06:53:33.470] [info] [gcode.cpp:559] [1885] probe at 101.997,149.997 is z=-0.063837 +[2026-05-03 06:53:33.471] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3553401259998736 +[2026-05-03 06:53:33.472] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984816 +[2026-05-03 06:53:33.472] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013377 +[2026-05-03 06:53:33.472] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7530815744153404 +[2026-05-03 06:53:33.960] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:33.961] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:33.977] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=415293849 trigger_emit_ticks=415678225 +[2026-05-03 06:53:33.978] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 415293849 150739149209 trigger_emit_ticks 415678225 150739533585 +[2026-05-03 06:53:33.981] [info] [homing.cpp:266] [1885] endstop_name probe tt 1257.5784417290215 trigger_time 1257.5784417290215 move_end_print_time 1257.830868625 +[2026-05-03 06:53:33.981] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -398 trig_steps -397 start_pos -103710 trig_pos -104107 halt_pos -104108 +[2026-05-03 06:53:34.913] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999985719 149.99722999999096 -0.06290340972317263 spos -0.061918425584735814 probing_z -0.23941842558465964 +[2026-05-03 06:53:34.913] [info] [gcode.cpp:559] [1885] probe at 101.997,149.997 is z=-0.062903 +[2026-05-03 06:53:34.914] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4430157919998692 +[2026-05-03 06:53:34.914] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 101.99734999985719 149.99722999999096 -0.06104152039864375 +[2026-05-03 06:53:34.915] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:53:34.916] [info] [probe.cpp:857] [1885] _move_next 71 probe_points.size 121 + +[2026-05-03 06:53:34.925] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.0049999998931 +[2026-05-03 06:53:34.926] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129942 +[2026-05-03 06:53:34.926] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.00058157441546 +[2026-05-03 06:53:36.169] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:36.169] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:36.185] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=680409623 trigger_emit_ticks=680793997 +[2026-05-03 06:53:36.187] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 680409623 151004264983 trigger_emit_ticks 680793997 151004649357 +[2026-05-03 06:53:36.187] [info] [homing.cpp:266] [1885] endstop_name probe tt 1259.7877711296178 trigger_time 1259.7877711296178 move_end_print_time 1260.0397894583334 +[2026-05-03 06:53:36.188] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1295 trig_steps -1294 start_pos -102811 trig_pos -104105 halt_pos -104106 +[2026-05-03 06:53:37.070] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999988157 150.0034600000115 -0.07115022664686418 spos -0.07191842558455619 probing_z -0.23441842558453985 +[2026-05-03 06:53:37.070] [info] [gcode.cpp:559] [1885] probe at 126.002,150.003 is z=-0.071150 +[2026-05-03 06:53:37.071] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.154853667999987 +[2026-05-03 06:53:37.072] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.0049999998931 +[2026-05-03 06:53:37.072] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129928 +[2026-05-03 06:53:37.073] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7630815744154492 +[2026-05-03 06:53:37.562] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:37.562] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:37.577] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=847576485 trigger_emit_ticks=847951485 +[2026-05-03 06:53:37.578] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 847576485 151171431845 trigger_emit_ticks 847951485 151171806845 +[2026-05-03 06:53:37.580] [info] [homing.cpp:266] [1885] endstop_name probe tt 1261.1807677903237 trigger_time 1261.1807677903237 move_end_print_time 1261.4327724583334 +[2026-05-03 06:53:37.580] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -406 start_pos -103706 trig_pos -104112 halt_pos -104113 +[2026-05-03 06:53:38.411] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999988157 150.0034600000115 -0.07806716011802259 spos -0.07691842558455164 probing_z -0.2519184255845509 +[2026-05-03 06:53:38.412] [info] [gcode.cpp:559] [1885] probe at 126.002,150.003 is z=-0.078067 +[2026-05-03 06:53:38.412] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3410126250000758 +[2026-05-03 06:53:38.413] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.0049999998931 +[2026-05-03 06:53:38.414] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129928 +[2026-05-03 06:53:38.414] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7455815744154389 +[2026-05-03 06:53:38.905] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:38.919] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1008592039 trigger_emit_ticks=1008976413 +[2026-05-03 06:53:38.921] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1008592039 151332447399 trigger_emit_ticks 1008976413 151332831773 +[2026-05-03 06:53:38.922] [info] [homing.cpp:266] [1885] endstop_name probe tt 1262.522659576452 trigger_time 1262.522659576452 move_end_print_time 1262.775167625 +[2026-05-03 06:53:38.923] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -404 trig_steps -402 start_pos -103713 trig_pos -104115 halt_pos -104117 +[2026-05-03 06:53:39.868] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999988157 150.0034600000115 -0.07849396864320432 spos -0.07941842558454937 probing_z -0.2594184255845612 +[2026-05-03 06:53:39.869] [info] [gcode.cpp:559] [1885] probe at 126.002,150.003 is z=-0.078494 +[2026-05-03 06:53:39.870] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4570521669998016 +[2026-05-03 06:53:39.870] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 126.00153999988157 150.0034600000115 -0.07590378513603037 +[2026-05-03 06:53:39.870] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:53:39.871] [info] [probe.cpp:857] [1885] _move_next 72 probe_points.size 121 + +[2026-05-03 06:53:39.879] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999562 +[2026-05-03 06:53:39.879] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130941942 +[2026-05-03 06:53:39.879] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574415558 +[2026-05-03 06:53:41.127] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:41.127] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:41.156] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1275249787 trigger_emit_ticks=1275634163 +[2026-05-03 06:53:41.169] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1275249787 trigger_emit_ticks=1275634163 +[2026-05-03 06:53:41.171] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1275249787 151599105147 trigger_emit_ticks 1275634163 151599489523 +[2026-05-03 06:53:41.172] [info] [homing.cpp:266] [1885] endstop_name probe tt 1264.7448369249437 trigger_time 1264.7448369249437 move_end_print_time 1264.998312625 +[2026-05-03 06:53:41.172] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1298 trig_steps -1295 start_pos -102811 trig_pos -104106 halt_pos -104109 +[2026-05-03 06:53:42.066] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.99949999991264 150.00346000004356 -0.07504319542734891 spos -0.07441842558449707 probing_z -0.2369184255844421 +[2026-05-03 06:53:42.066] [info] [gcode.cpp:559] [1885] probe at 149.999,150.003 is z=-0.075043 +[2026-05-03 06:53:42.068] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1965322089999972 +[2026-05-03 06:53:42.069] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999562 +[2026-05-03 06:53:42.069] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.0039600001309167965 +[2026-05-03 06:53:42.070] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7555815744155477 +[2026-05-03 06:53:42.560] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:42.561] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:42.576] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1447671721 +[2026-05-03 06:53:42.578] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 150323855360 trigger_emit_ticks 1447671721 151771527081 +[2026-05-03 06:53:42.580] [info] [homing.cpp:266] [1885] endstop_name probe tt 1266.1785035290848 trigger_time 1266.1785035290848 move_end_print_time 1266.432021375 +[2026-05-03 06:53:42.580] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -405 trig_steps -403 start_pos -103709 trig_pos -104112 halt_pos -104114 +[2026-05-03 06:53:43.520] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.99949999991264 150.00346000004356 -0.0760002903207789 spos -0.07691842558443795 probing_z -0.2519184255844523 +[2026-05-03 06:53:43.521] [info] [gcode.cpp:559] [1885] probe at 149.999,150.003 is z=-0.076000 +[2026-05-03 06:53:43.522] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4532903340000303 +[2026-05-03 06:53:43.523] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:53:43.524] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:53:43.525] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.528] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.529] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.531] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.534] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.535] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.537] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.538] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.540] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.542] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.544] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.545] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.547] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.549] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.550] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.553] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.554] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.556] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.557] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.559] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.560] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.562] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.563] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.565] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.567] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.568] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.570] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.602] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.665] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.727] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.789] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.852] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.914] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:43.976] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:44.038] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:44.102] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:44.163] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:44.226] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:44.289] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:44.351] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:53:44.413] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:53:44.414] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999562 +[2026-05-03 06:53:44.415] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.0039600001309167965 +[2026-05-03 06:53:44.415] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.7430815744155164 +[2026-05-03 06:53:46.863] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:46.863] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:46.877] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1964000409 +[2026-05-03 06:53:46.879] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 150323855360 trigger_emit_ticks 1964000409 152287855769 +[2026-05-03 06:53:46.880] [info] [homing.cpp:266] [1885] endstop_name probe tt 1270.4813200203153 trigger_time 1270.4813200203153 move_end_print_time 1270.7339716666668 +[2026-05-03 06:53:46.880] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -795 trig_steps -794 start_pos -103314 trig_pos -104108 halt_pos -104109 +[2026-05-03 06:53:47.770] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.99949999991264 150.00346000004356 -0.07376489946785367 spos -0.07441842558449707 probing_z -0.24191842558448373 +[2026-05-03 06:53:47.771] [info] [gcode.cpp:559] [1885] probe at 149.999,150.003 is z=-0.073765 +[2026-05-03 06:53:47.772] [info] [load_cell_probe.cpp:333] [1885] run_probe time 3.3584304180001254 +[2026-05-03 06:53:47.772] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 149.99949999991264 150.00346000004356 -0.07493612840532717 +[2026-05-03 06:53:47.773] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:53:47.773] [info] [probe.cpp:857] [1885] _move_next 73 probe_points.size 121 + +[2026-05-03 06:53:47.782] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.00092000001933 +[2026-05-03 06:53:47.782] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.99399999986807 +[2026-05-03 06:53:47.782] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574415636 +[2026-05-03 06:53:49.031] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:49.031] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:49.047] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2223826673 trigger_emit_ticks=2224201673 +[2026-05-03 06:53:49.049] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2223826673 152547682033 trigger_emit_ticks 2224201673 152548057033 +[2026-05-03 06:53:49.050] [info] [homing.cpp:266] [1885] endstop_name probe tt 1272.64969658657 trigger_time 1272.64969658657 move_end_print_time 1272.902083625 +[2026-05-03 06:53:49.051] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1303 trig_steps -1302 start_pos -102811 trig_pos -104113 halt_pos -104114 +[2026-05-03 06:53:49.936] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.99745999994371 150.00346000007562 -0.08797068207691303 spos -0.08691842558437202 probing_z -0.254418425584364 +[2026-05-03 06:53:49.937] [info] [gcode.cpp:559] [1885] probe at 173.997,150.003 is z=-0.087971 +[2026-05-03 06:53:49.938] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.163484500999857 +[2026-05-03 06:53:49.939] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.00092000001933 +[2026-05-03 06:53:49.939] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868095 +[2026-05-03 06:53:49.939] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7430815744156254 +[2026-05-03 06:53:50.434] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:50.449] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2392116840 trigger_emit_ticks=2392501117 +[2026-05-03 06:53:50.451] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2392116840 152715972200 trigger_emit_ticks 2392501117 152716356477 +[2026-05-03 06:53:50.452] [info] [homing.cpp:266] [1885] endstop_name probe tt 1274.0522117445255 trigger_time 1274.0522117445255 move_end_print_time 1274.3042894583334 +[2026-05-03 06:53:50.452] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -408 trig_steps -406 start_pos -103714 trig_pos -104120 halt_pos -104122 +[2026-05-03 06:53:51.331] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.99745999994371 150.00346000007562 -0.091516211762594 spos -0.09191842558436747 probing_z -0.27191842558437473 +[2026-05-03 06:53:51.331] [info] [gcode.cpp:559] [1885] probe at 173.997,150.003 is z=-0.091516 +[2026-05-03 06:53:51.332] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3941430840000066 +[2026-05-03 06:53:51.333] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.00092000001933 +[2026-05-03 06:53:51.333] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868095 +[2026-05-03 06:53:51.333] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7230815744156152 +[2026-05-03 06:53:51.822] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:51.822] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:51.824] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:53:51.837] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2558687017 trigger_emit_ticks=2559071393 +[2026-05-03 06:53:51.839] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2558687017 152882542377 trigger_emit_ticks 2559071393 152882926753 +[2026-05-03 06:53:51.839] [info] [homing.cpp:266] [1885] endstop_name probe tt 1275.4403165183683 trigger_time 1275.4403165183683 move_end_print_time 1275.6928175 +[2026-05-03 06:53:51.840] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -398 start_pos -103722 trig_pos -104120 halt_pos -104122 +[2026-05-03 06:53:52.678] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.99745999994371 150.00346000007562 -0.0926575456705851 spos -0.09191842558436747 probing_z -0.27191842558438484 +[2026-05-03 06:53:52.680] [info] [gcode.cpp:559] [1885] probe at 173.997,150.003 is z=-0.092658 +[2026-05-03 06:53:52.681] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3482545419999497 +[2026-05-03 06:53:52.681] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 173.99745999994374 150.00346000007562 -0.09071481317003072 +[2026-05-03 06:53:52.681] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:53:52.682] [info] [probe.cpp:857] [1885] _move_next 74 probe_points.size 121 + +[2026-05-03 06:53:52.692] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.99888000008247 +[2026-05-03 06:53:52.692] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.00441999987192 +[2026-05-03 06:53:52.692] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574415734 +[2026-05-03 06:53:53.943] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:53.957] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2813066067 trigger_emit_ticks=2813450443 +[2026-05-03 06:53:53.959] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2813066067 153136921427 trigger_emit_ticks 2813450443 153137305803 +[2026-05-03 06:53:53.960] [info] [homing.cpp:266] [1885] endstop_name probe tt 1277.5601715359116 trigger_time 1277.5601715359116 move_end_print_time 1277.8134578333334 +[2026-05-03 06:53:53.961] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1306 trig_steps -1303 start_pos -102811 trig_pos -104114 halt_pos -104117 +[2026-05-03 06:53:54.843] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.0016499999772 149.99723000010528 -0.08645484308423287 spos -0.08691842558425833 probing_z -0.25691842558426625 +[2026-05-03 06:53:54.843] [info] [gcode.cpp:559] [1885] probe at 198.002,149.997 is z=-0.086455 +[2026-05-03 06:53:54.844] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.161370709000039 +[2026-05-03 06:53:54.845] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.99888000008247 +[2026-05-03 06:53:54.845] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.004419999871914 +[2026-05-03 06:53:54.846] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7355815744157237 +[2026-05-03 06:53:55.339] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:55.339] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:55.357] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=2981173527 +[2026-05-03 06:53:55.359] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 154618822656 trigger_emit_ticks 2981173527 153305028887 +[2026-05-03 06:53:55.360] [info] [homing.cpp:266] [1885] endstop_name probe tt 1278.957881273447 trigger_time 1278.957881273447 move_end_print_time 1279.2106210833333 +[2026-05-03 06:53:55.361] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -404 trig_steps -402 start_pos -103717 trig_pos -104119 halt_pos -104121 +[2026-05-03 06:53:56.237] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.0016499999772 149.99723000010528 -0.08867692787788178 spos -0.08941842558425606 probing_z -0.2694184255842764 +[2026-05-03 06:53:56.238] [info] [gcode.cpp:559] [1885] probe at 198.002,149.997 is z=-0.088677 +[2026-05-03 06:53:56.239] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3952828760000102 +[2026-05-03 06:53:56.241] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.99888000008247 +[2026-05-03 06:53:56.241] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.004419999871914 +[2026-05-03 06:53:56.241] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7255815744157135 +[2026-05-03 06:53:56.730] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:56.730] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:56.746] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3147644661 trigger_emit_ticks=3148029037 +[2026-05-03 06:53:56.747] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3147644661 153471500021 trigger_emit_ticks 3148029037 153471884397 +[2026-05-03 06:53:56.748] [info] [homing.cpp:266] [1885] endstop_name probe tt 1280.3483620305142 trigger_time 1280.3483620305142 move_end_print_time 1280.6008649583334 +[2026-05-03 06:53:56.749] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -401 trig_steps -399 start_pos -103721 trig_pos -104120 halt_pos -104122 +[2026-05-03 06:53:57.685] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.0016499999772 149.99723000010528 -0.09036756322656031 spos -0.0894184255843129 probing_z -0.2719184255842866 +[2026-05-03 06:53:57.686] [info] [gcode.cpp:559] [1885] probe at 198.002,149.997 is z=-0.090368 +[2026-05-03 06:53:57.686] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4467157920000773 +[2026-05-03 06:53:57.687] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 198.0016499999772 149.99723000010528 -0.08849977806289167 +[2026-05-03 06:53:57.687] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:53:57.688] [info] [probe.cpp:857] [1885] _move_next 75 probe_points.size 121 + +[2026-05-03 06:53:57.697] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.9968400001456 +[2026-05-03 06:53:57.697] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.0023799998803 +[2026-05-03 06:53:57.697] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744158326 +[2026-05-03 06:53:58.437] [error] [tmc_uart.cpp:295] [1885] _decode_read error #0 +[2026-05-03 06:53:58.947] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:53:58.947] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:53:58.961] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3413692639 trigger_emit_ticks=3414077013 +[2026-05-03 06:53:58.963] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3413692639 153737547999 trigger_emit_ticks 3414077013 153737932373 +[2026-05-03 06:53:58.964] [info] [homing.cpp:266] [1885] endstop_name probe tt 1282.565456793422 trigger_time 1282.565456793422 move_end_print_time 1282.8177369166667 +[2026-05-03 06:53:58.964] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1302 trig_steps -1301 start_pos -102811 trig_pos -104112 halt_pos -104113 +[2026-05-03 06:53:59.851] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99961000001295 149.99723000013265 -0.0784020335127433 spos -0.07941842558415146 probing_z -0.2519184255841673 +[2026-05-03 06:53:59.851] [info] [gcode.cpp:559] [1885] probe at 222.000,149.997 is z=-0.078402 +[2026-05-03 06:53:59.853] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1645972090000214 +[2026-05-03 06:53:59.854] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.9968400001456 +[2026-05-03 06:53:59.855] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.0023799998803 +[2026-05-03 06:53:59.855] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7455815744158225 +[2026-05-03 06:54:00.350] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:00.351] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:00.367] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3582092783 trigger_emit_ticks=3582477157 +[2026-05-03 06:54:00.369] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3582092783 153905948143 trigger_emit_ticks 3582477157 153906332517 +[2026-05-03 06:54:00.370] [info] [homing.cpp:266] [1885] endstop_name probe tt 1283.968812401903 trigger_time 1283.968812401903 move_end_print_time 1284.2215598333332 +[2026-05-03 06:54:00.370] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -409 trig_steps -407 start_pos -103713 trig_pos -104120 halt_pos -104122 +[2026-05-03 06:54:01.199] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99961000001295 149.99723000013265 -0.08380282244526466 spos -0.08441842558420376 probing_z -0.27191842558417756 +[2026-05-03 06:54:01.200] [info] [gcode.cpp:559] [1885] probe at 222.000,149.997 is z=-0.083803 +[2026-05-03 06:54:01.200] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3470491260000017 +[2026-05-03 06:54:01.202] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.9968400001456 +[2026-05-03 06:54:01.202] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.0023799998803 +[2026-05-03 06:54:01.202] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7230815744158123 +[2026-05-03 06:54:01.688] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:01.689] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:01.705] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3742627669 trigger_emit_ticks=3743012043 +[2026-05-03 06:54:01.706] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3742627669 154066483029 trigger_emit_ticks 3743012043 154066867403 +[2026-05-03 06:54:01.707] [info] [homing.cpp:266] [1885] endstop_name probe tt 1285.3066216713319 trigger_time 1285.3066216713319 move_end_print_time 1285.5595095416666 +[2026-05-03 06:54:01.707] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -401 trig_steps -400 start_pos -103722 trig_pos -104122 halt_pos -104123 +[2026-05-03 06:54:02.536] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99961000001295 149.99723000013265 -0.08558937423523932 spos -0.08441842558420376 probing_z -0.27691842558418767 +[2026-05-03 06:54:02.537] [info] [gcode.cpp:559] [1885] probe at 222.000,149.997 is z=-0.085589 +[2026-05-03 06:54:02.538] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3370582929999273 +[2026-05-03 06:54:02.538] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 221.99961000001295 149.99723000013265 -0.08259807673108242 +[2026-05-03 06:54:02.538] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:54:02.539] [info] [probe.cpp:857] [1885] _move_next 76 probe_points.size 121 + +[2026-05-03 06:54:02.548] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 395.9948000002087 +[2026-05-03 06:54:02.548] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.0003399998887 +[2026-05-03 06:54:02.548] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574415931 +[2026-05-03 06:54:03.804] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:03.819] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3996516103 trigger_emit_ticks=3996900502 +[2026-05-03 06:54:03.823] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3996516103 154320371463 trigger_emit_ticks 3996900502 154320755862 +[2026-05-03 06:54:03.824] [info] [homing.cpp:266] [1885] endstop_name probe tt 1287.4223868247645 trigger_time 1287.4223868247645 move_end_print_time 1287.675069375 +[2026-05-03 06:54:03.824] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1314 trig_steps -1313 start_pos -102811 trig_pos -104124 halt_pos -104125 +[2026-05-03 06:54:04.707] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.9975700000487 149.99723000016002 -0.09073187395048693 spos -0.09191842558408325 probing_z -0.281918425584069 +[2026-05-03 06:54:04.708] [info] [gcode.cpp:559] [1885] probe at 245.998,149.997 is z=-0.090732 +[2026-05-03 06:54:04.709] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.169164834000185 +[2026-05-03 06:54:04.710] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 395.9948000002087 +[2026-05-03 06:54:04.710] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.0003399998887 +[2026-05-03 06:54:04.710] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7155815744159209 +[2026-05-03 06:54:05.203] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:05.204] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:05.218] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4164536707 trigger_emit_ticks=4164911707 +[2026-05-03 06:54:05.220] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4164536707 154488392067 trigger_emit_ticks 4164911707 154488767067 +[2026-05-03 06:54:05.222] [info] [homing.cpp:266] [1885] endstop_name probe tt 1288.8224984262324 trigger_time 1288.8224984262324 move_end_print_time 1289.074224 +[2026-05-03 06:54:05.222] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -411 trig_steps -410 start_pos -103725 trig_pos -104135 halt_pos -104136 +[2026-05-03 06:54:06.152] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.9975700000487 149.99723000016002 -0.09268401586343139 spos -0.09191842558402641 probing_z -0.30941842558407906 +[2026-05-03 06:54:06.152] [info] [gcode.cpp:559] [1885] probe at 245.998,149.997 is z=-0.092684 +[2026-05-03 06:54:06.153] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4440608340000836 +[2026-05-03 06:54:06.154] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 395.9948000002087 +[2026-05-03 06:54:06.154] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 96.0003399998887 +[2026-05-03 06:54:06.154] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.6880815744159106 +[2026-05-03 06:54:06.642] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:06.643] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:06.658] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=42192353 trigger_emit_ticks=42576727 +[2026-05-03 06:54:06.660] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 42192353 154661015009 trigger_emit_ticks 42576727 154661399383 +[2026-05-03 06:54:06.661] [info] [homing.cpp:266] [1885] endstop_name probe tt 1290.261120454538 trigger_time 1290.261120454538 move_end_print_time 1290.5135573333334 +[2026-05-03 06:54:06.661] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -399 trig_steps -398 start_pos -103736 trig_pos -104134 halt_pos -104135 +[2026-05-03 06:54:07.549] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.9975700000487 149.99723000016002 -0.09190947169226032 spos -0.0919184255841401 probing_z -0.30691842558408944 +[2026-05-03 06:54:07.550] [info] [gcode.cpp:559] [1885] probe at 245.998,149.997 is z=-0.091909 +[2026-05-03 06:54:07.551] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3971543759998895 +[2026-05-03 06:54:07.551] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 245.99757000004874 149.99723000016002 -0.09177512050205955 +[2026-05-03 06:54:07.551] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:54:07.552] [info] [probe.cpp:857] [1885] _move_next 77 probe_points.size 121 + +[2026-05-03 06:54:07.560] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 420.0052200002719 +[2026-05-03 06:54:07.560] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.0023799998803 +[2026-05-03 06:54:07.561] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574416029 +[2026-05-03 06:54:08.327] [info] [clocksync.cpp:199] [1961] mcu 'bed_sensor': New minimum RTT: sent_time=1317.149046044,half_rtt=0.0001586665000559151,freq=119998352.21253516 +[2026-05-03 06:54:08.815] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:08.815] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:08.830] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=302898567 trigger_emit_ticks=303282943 +[2026-05-03 06:54:08.832] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 302898567 154921721223 trigger_emit_ticks 303282943 154922105599 +[2026-05-03 06:54:08.833] [info] [homing.cpp:266] [1885] endstop_name probe tt 1292.4337020738576 trigger_time 1292.4337020738576 move_end_print_time 1292.686198125 +[2026-05-03 06:54:08.833] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1309 trig_steps -1307 start_pos -102811 trig_pos -104118 halt_pos -104120 +[2026-05-03 06:54:09.717] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 246.0038000000761 174.0014200001958 -0.07647880786035707 spos -0.07691842558398321 probing_z -0.26691842558397116 +[2026-05-03 06:54:09.717] [info] [gcode.cpp:559] [1885] probe at 246.004,174.001 is z=-0.076479 +[2026-05-03 06:54:09.718] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1653901260001476 +[2026-05-03 06:54:09.719] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 420.00522000027183 +[2026-05-03 06:54:09.719] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.00237999988028 +[2026-05-03 06:54:09.719] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7280815744160187 +[2026-05-03 06:54:10.208] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:10.209] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:10.224] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=470058269 trigger_emit_ticks=470442643 +[2026-05-03 06:54:10.226] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 470058269 155088880925 trigger_emit_ticks 470442643 155089265299 +[2026-05-03 06:54:10.227] [info] [homing.cpp:266] [1885] endstop_name probe tt 1293.8267189504388 trigger_time 1293.8267189504388 move_end_print_time 1294.0792834583333 +[2026-05-03 06:54:10.227] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -405 start_pos -103720 trig_pos -104125 halt_pos -104127 +[2026-05-03 06:54:11.059] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 246.00380000007607 174.00142000019576 -0.08003684240407022 spos -0.07941842558398093 probing_z -0.2844184255839812 +[2026-05-03 06:54:11.060] [info] [gcode.cpp:559] [1885] probe at 246.004,174.001 is z=-0.080037 +[2026-05-03 06:54:11.061] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3427076670000133 +[2026-05-03 06:54:11.062] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 420.00522000027183 +[2026-05-03 06:54:11.062] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 72.0023799998803 +[2026-05-03 06:54:11.062] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7105815744160084 +[2026-05-03 06:54:11.554] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:11.555] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:11.568] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=631355133 trigger_emit_ticks=631739507 +[2026-05-03 06:54:11.569] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 631355133 155250177789 trigger_emit_ticks 631739507 155250562163 +[2026-05-03 06:54:11.570] [info] [homing.cpp:266] [1885] endstop_name probe tt 1295.1708784122618 trigger_time 1295.1708784122618 move_end_print_time 1295.4242165416667 +[2026-05-03 06:54:11.571] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -404 trig_steps -400 start_pos -103727 trig_pos -104127 halt_pos -104131 +[2026-05-03 06:54:12.409] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 246.00380000007607 174.00142000019576 -0.08082549057873772 spos -0.0819184255840355 probing_z -0.28941842558399156 +[2026-05-03 06:54:12.410] [info] [gcode.cpp:559] [1885] probe at 246.004,174.001 is z=-0.080825 +[2026-05-03 06:54:12.411] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3496844589999455 +[2026-05-03 06:54:12.411] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 246.00380000007604 174.00142000019574 -0.07911371361438833 +[2026-05-03 06:54:12.412] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:54:12.412] [info] [probe.cpp:857] [1885] _move_next 78 probe_points.size 121 + +[2026-05-03 06:54:12.422] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 395.99480000020867 +[2026-05-03 06:54:12.422] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.004419999871914 +[2026-05-03 06:54:12.422] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574416127 +[2026-05-03 06:54:13.674] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:13.675] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:13.704] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=885805557 trigger_emit_ticks=886189859 +[2026-05-03 06:54:13.705] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 885805557 155504628213 trigger_emit_ticks 886189859 155505012515 +[2026-05-03 06:54:13.706] [info] [homing.cpp:266] [1885] endstop_name probe tt 1297.2913260349942 trigger_time 1297.2913260349942 move_end_print_time 1297.5585946666667 +[2026-05-03 06:54:13.707] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1305 trig_steps -1300 start_pos -102811 trig_pos -104111 halt_pos -104116 +[2026-05-03 06:54:14.588] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.9996100000403 173.99519000016838 -0.07477336082801364 spos -0.0744184255838718 probing_z -0.24941842558387295 +[2026-05-03 06:54:14.589] [info] [gcode.cpp:559] [1885] probe at 222.000,173.995 is z=-0.074773 +[2026-05-03 06:54:14.589] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1762371679999433 +[2026-05-03 06:54:14.591] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 395.9948000002086 +[2026-05-03 06:54:14.591] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.004419999871914 +[2026-05-03 06:54:14.591] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7380815744161167 +[2026-05-03 06:54:15.080] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:15.081] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:15.095] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1054682877 trigger_emit_ticks=1055067251 +[2026-05-03 06:54:15.097] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1054682877 155673505533 trigger_emit_ticks 1055067251 155673889907 +[2026-05-03 06:54:15.098] [info] [homing.cpp:266] [1885] endstop_name probe tt 1298.6986509170124 trigger_time 1298.6986509170124 move_end_print_time 1298.95062775 +[2026-05-03 06:54:15.099] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -103716 trig_pos -104115 halt_pos -104116 +[2026-05-03 06:54:15.927] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99961000004026 173.99519000016835 -0.07332516167826061 spos -0.0744184255838718 probing_z -0.2594184255838834 +[2026-05-03 06:54:15.927] [info] [gcode.cpp:559] [1885] probe at 222.000,173.995 is z=-0.073325 +[2026-05-03 06:54:15.928] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3386095429998477 +[2026-05-03 06:54:15.929] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 395.9948000002086 +[2026-05-03 06:54:15.929] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.004419999871914 +[2026-05-03 06:54:15.929] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7380815744161064 +[2026-05-03 06:54:16.417] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:16.419] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:54:16.434] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1215131067 trigger_emit_ticks=1215515443 +[2026-05-03 06:54:16.437] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1215131067 155833953723 trigger_emit_ticks 1215515443 155834338099 +[2026-05-03 06:54:16.438] [info] [homing.cpp:266] [1885] endstop_name probe tt 1300.0357309426158 trigger_time 1300.0357309426158 move_end_print_time 1300.2881994166667 +[2026-05-03 06:54:16.438] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -404 trig_steps -403 start_pos -103716 trig_pos -104119 halt_pos -104120 +[2026-05-03 06:54:17.269] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99961000004026 173.99519000016835 -0.07798443131748531 spos -0.07691842558392636 probing_z -0.2694184255838936 +[2026-05-03 06:54:17.269] [info] [gcode.cpp:559] [1885] probe at 222.000,173.995 is z=-0.077984 +[2026-05-03 06:54:17.270] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3414836260001266 +[2026-05-03 06:54:17.270] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 221.99961000004024 173.99519000016835 -0.07536098460791986 +[2026-05-03 06:54:17.271] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:54:17.271] [info] [probe.cpp:857] [1885] _move_next 79 probe_points.size 121 + +[2026-05-03 06:54:17.279] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.9968400001455 +[2026-05-03 06:54:17.280] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868088 +[2026-05-03 06:54:17.280] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744162256 +[2026-05-03 06:54:18.529] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:18.529] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:18.543] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1468531491 trigger_emit_ticks=1468915867 +[2026-05-03 06:54:18.546] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1468531491 156087354147 trigger_emit_ticks 1468915867 156087738523 +[2026-05-03 06:54:18.547] [info] [homing.cpp:266] [1885] endstop_name probe tt 1302.1474265650565 trigger_time 1302.1474265650565 move_end_print_time 1302.399232125 +[2026-05-03 06:54:18.547] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1300 trig_steps -1299 start_pos -102811 trig_pos -104110 halt_pos -104111 +[2026-05-03 06:54:19.432] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 197.9954200000068 174.0014200001387 -0.08129107606872174 spos -0.08191842558375129 probing_z -0.24691842558377441 +[2026-05-03 06:54:19.433] [info] [gcode.cpp:559] [1885] probe at 197.995,174.001 is z=-0.081291 +[2026-05-03 06:54:19.433] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1614459180000267 +[2026-05-03 06:54:19.435] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.9968400001455 +[2026-05-03 06:54:19.435] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868095 +[2026-05-03 06:54:19.435] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7505815744162154 +[2026-05-03 06:54:19.926] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:19.927] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:19.942] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1636260975 trigger_emit_ticks=1636645349 +[2026-05-03 06:54:19.944] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1636260975 156255083631 trigger_emit_ticks 1636645349 156255468005 +[2026-05-03 06:54:19.946] [info] [homing.cpp:266] [1885] endstop_name probe tt 1303.545191028384 trigger_time 1303.545191028384 move_end_print_time 1303.7974879583332 +[2026-05-03 06:54:19.946] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -406 start_pos -103711 trig_pos -104117 halt_pos -104118 +[2026-05-03 06:54:20.877] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 197.9954200000068 174.0014200001387 -0.08499798605164341 spos -0.08441842558380586 probing_z -0.2644184255837847 +[2026-05-03 06:54:20.877] [info] [gcode.cpp:559] [1885] probe at 197.995,174.001 is z=-0.084998 +[2026-05-03 06:54:20.879] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4450352930000463 +[2026-05-03 06:54:20.880] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:54:20.881] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:54:20.882] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.885] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.887] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.888] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.890] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.892] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.894] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.895] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.897] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.899] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.901] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.903] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.905] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.906] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.908] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.910] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.912] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.913] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.915] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.917] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.919] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.921] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.923] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.925] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.926] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.928] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.930] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:20.959] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:21.021] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:21.084] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:21.147] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:21.209] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:21.272] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:21.333] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:21.396] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:21.459] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:21.521] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:21.583] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:21.646] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:21.708] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:21.770] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:54:21.772] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.9968400001455 +[2026-05-03 06:54:21.772] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868095 +[2026-05-03 06:54:21.772] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.7330815744161838 +[2026-05-03 06:54:24.219] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:24.219] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:24.232] [warning] [tmc.cpp:887] [1885] Stepper stepper_z phase change (was 2 now 1) +[2026-05-03 06:54:24.234] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2151427122 trigger_emit_ticks=2151811475 +[2026-05-03 06:54:24.239] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2151427122 156770249778 trigger_emit_ticks 2151811475 156770634131 +[2026-05-03 06:54:24.241] [info] [homing.cpp:266] [1885] endstop_name probe tt 1307.8383013535195 trigger_time 1307.8383013535195 move_end_print_time 1308.0901062916666 +[2026-05-03 06:54:24.241] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -794 trig_steps -793 start_pos -103318 trig_pos -104111 halt_pos -104112 +[2026-05-03 06:54:25.170] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 197.9954200000068 174.0014200001387 -0.08211762962579902 spos -0.08191842558380813 probing_z -0.24941842558381633 +[2026-05-03 06:54:25.170] [info] [gcode.cpp:559] [1885] probe at 197.995,174.001 is z=-0.082118 +[2026-05-03 06:54:25.171] [info] [load_cell_probe.cpp:333] [1885] run_probe time 3.4006069600000046 +[2026-05-03 06:54:25.172] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 197.9954200000068 174.00142000013867 -0.08280223058205473 +[2026-05-03 06:54:25.172] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:54:25.173] [info] [probe.cpp:857] [1885] _move_next 80 probe_points.size 121 + +[2026-05-03 06:54:25.181] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.99888000008235 +[2026-05-03 06:54:25.181] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130893026 +[2026-05-03 06:54:25.181] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744163034 +[2026-05-03 06:54:26.425] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:26.440] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2416074165 trigger_emit_ticks=2416458541 +[2026-05-03 06:54:26.442] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2416074165 157034896821 trigger_emit_ticks 2416458541 157035281197 +[2026-05-03 06:54:26.443] [info] [homing.cpp:266] [1885] endstop_name probe tt 1310.043724829116 trigger_time 1310.043724829116 move_end_print_time 1310.2960232083333 +[2026-05-03 06:54:26.444] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1293 trig_steps -1291 start_pos -102811 trig_pos -104102 halt_pos -104104 +[2026-05-03 06:54:27.380] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.99745999997572 174.00142000010663 -0.0676999391881212 spos -0.06691842558370809 probing_z -0.22691842558369668 +[2026-05-03 06:54:27.381] [info] [gcode.cpp:559] [1885] probe at 173.997,174.001 is z=-0.067700 +[2026-05-03 06:54:27.381] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.2080978349999896 +[2026-05-03 06:54:27.382] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.99888000008235 +[2026-05-03 06:54:27.383] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.0039600001309167965 +[2026-05-03 06:54:27.383] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7680815744162928 +[2026-05-03 06:54:27.878] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:27.878] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:27.897] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2590418329 trigger_emit_ticks=2590802703 +[2026-05-03 06:54:27.898] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2590418329 157209240985 trigger_emit_ticks 2590802703 157209625359 +[2026-05-03 06:54:27.899] [info] [homing.cpp:266] [1885] endstop_name probe tt 1311.4966133996386 trigger_time 1311.4966133996386 move_end_print_time 1311.7489630833334 +[2026-05-03 06:54:27.899] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -410 trig_steps -409 start_pos -103704 trig_pos -104113 halt_pos -104114 +[2026-05-03 06:54:28.730] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.99745999997572 174.00142000010663 -0.07244489867319223 spos -0.07191842558370354 probing_z -0.2544184255837072 +[2026-05-03 06:54:28.731] [info] [gcode.cpp:559] [1885] probe at 173.997,174.001 is z=-0.072445 +[2026-05-03 06:54:28.731] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3498816670000906 +[2026-05-03 06:54:28.733] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.99888000008235 +[2026-05-03 06:54:28.733] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.0039600001309167965 +[2026-05-03 06:54:28.733] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7430815744162826 +[2026-05-03 06:54:29.221] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:29.222] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:29.238] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2751626145 trigger_emit_ticks=2752010519 +[2026-05-03 06:54:29.240] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2751626145 157370448801 trigger_emit_ticks 2752010519 157370833175 +[2026-05-03 06:54:29.241] [info] [homing.cpp:266] [1885] endstop_name probe tt 1312.8400308277764 trigger_time 1312.8400308277764 move_end_print_time 1313.0930368333334 +[2026-05-03 06:54:29.241] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -399 trig_steps -398 start_pos -103714 trig_pos -104112 halt_pos -104113 +[2026-05-03 06:54:30.075] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.99745999997572 174.00142000010663 -0.06982931547740942 spos -0.06941842558370581 probing_z -0.25191842558371735 +[2026-05-03 06:54:30.076] [info] [gcode.cpp:559] [1885] probe at 173.997,174.001 is z=-0.069829 +[2026-05-03 06:54:30.076] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.344876916999965 +[2026-05-03 06:54:30.077] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 173.99745999997572 174.0014200001066 -0.06999138444624095 +[2026-05-03 06:54:30.077] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:54:30.078] [info] [probe.cpp:857] [1885] _move_next 81 probe_points.size 121 + +[2026-05-03 06:54:30.087] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.0009200000192 +[2026-05-03 06:54:30.087] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129903 +[2026-05-03 06:54:30.087] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574416402 +[2026-05-03 06:54:31.333] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:31.348] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3005325717 +[2026-05-03 06:54:31.349] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 158913789952 trigger_emit_ticks 3005325717 157624148373 +[2026-05-03 06:54:31.350] [info] [homing.cpp:266] [1885] endstop_name probe tt 1314.9510211185739 trigger_time 1314.9510211185739 move_end_print_time 1315.2030951666666 +[2026-05-03 06:54:31.350] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1296 trig_steps -1295 start_pos -102811 trig_pos -104106 halt_pos -104107 +[2026-05-03 06:54:32.284] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.99949999994465 174.00142000007457 -0.06575192893504142 spos -0.06691842558365124 probing_z -0.23691842558359832 +[2026-05-03 06:54:32.285] [info] [gcode.cpp:559] [1885] probe at 149.999,174.001 is z=-0.065752 +[2026-05-03 06:54:32.286] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.2071137929999622 +[2026-05-03 06:54:32.287] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.0009200000192 +[2026-05-03 06:54:32.287] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129928 +[2026-05-03 06:54:32.287] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7605815744163913 +[2026-05-03 06:54:32.779] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:32.780] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:32.799] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3178613953 trigger_emit_ticks=3178998329 +[2026-05-03 06:54:32.801] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3178613953 157797436609 trigger_emit_ticks 3178998329 157797820985 +[2026-05-03 06:54:32.802] [info] [homing.cpp:266] [1885] endstop_name probe tt 1316.3983132646354 trigger_time 1316.3983132646354 move_end_print_time 1316.6508967083332 +[2026-05-03 06:54:32.802] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -408 trig_steps -407 start_pos -103707 trig_pos -104114 halt_pos -104115 +[2026-05-03 06:54:33.731] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.99949999994465 174.00142000007457 -0.06481986003910675 spos -0.06441842558359667 probing_z -0.2569184255836088 +[2026-05-03 06:54:33.731] [info] [gcode.cpp:559] [1885] probe at 149.999,174.001 is z=-0.064820 +[2026-05-03 06:54:33.732] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4464738750000379 +[2026-05-03 06:54:33.733] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.0009200000192 +[2026-05-03 06:54:33.734] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129928 +[2026-05-03 06:54:33.734] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7405815744163811 +[2026-05-03 06:54:34.218] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:34.219] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:34.220] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:54:34.236] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3351608525 +[2026-05-03 06:54:34.250] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3351608525 +[2026-05-03 06:54:34.252] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 158913789952 trigger_emit_ticks 3351608525 157970431181 +[2026-05-03 06:54:34.253] [info] [homing.cpp:266] [1885] endstop_name probe tt 1317.836751741355 trigger_time 1317.836751741355 move_end_print_time 1318.0896126666667 +[2026-05-03 06:54:34.253] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -398 trig_steps -397 start_pos -103715 trig_pos -104112 halt_pos -104113 +[2026-05-03 06:54:35.082] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.99949999994465 174.00142000007457 -0.06697973577542324 spos -0.0669184255835944 probing_z -0.251918425583619 +[2026-05-03 06:54:35.083] [info] [gcode.cpp:559] [1885] probe at 149.999,174.001 is z=-0.066980 +[2026-05-03 06:54:35.084] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.351437333999911 +[2026-05-03 06:54:35.084] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 149.99949999994465 174.00142000007455 -0.06585050824985714 +[2026-05-03 06:54:35.085] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:54:35.086] [info] [probe.cpp:857] [1885] _move_next 82 probe_points.size 121 + +[2026-05-03 06:54:35.094] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999561 +[2026-05-03 06:54:35.095] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013376 +[2026-05-03 06:54:35.095] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744165005 +[2026-05-03 06:54:36.337] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:36.337] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:36.351] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3605878477 +[2026-05-03 06:54:36.354] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 158913789952 trigger_emit_ticks 3605878477 158224701133 +[2026-05-03 06:54:36.355] [info] [homing.cpp:266] [1885] endstop_name probe tt 1319.9556947393828 trigger_time 1319.9556947393828 move_end_print_time 1320.2074909583334 +[2026-05-03 06:54:36.356] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1290 trig_steps -1289 start_pos -102811 trig_pos -104100 halt_pos -104101 +[2026-05-03 06:54:37.290] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999991116 174.00142000004493 -0.052227313643043755 spos -0.051918425583494354 probing_z -0.2219184255834996 +[2026-05-03 06:54:37.291] [info] [gcode.cpp:559] [1885] probe at 126.002,174.001 is z=-0.052227 +[2026-05-03 06:54:37.292] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.205651292000084 +[2026-05-03 06:54:37.293] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999561 +[2026-05-03 06:54:37.293] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013377 +[2026-05-03 06:54:37.293] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7755815744164897 +[2026-05-03 06:54:37.789] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:37.789] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:37.806] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3780111811 +[2026-05-03 06:54:37.808] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 158913789952 trigger_emit_ticks 3780111811 158398934467 +[2026-05-03 06:54:37.809] [info] [homing.cpp:266] [1885] endstop_name probe tt 1321.4076581693832 trigger_time 1321.4076581693832 move_end_print_time 1321.6594783333333 +[2026-05-03 06:54:37.809] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -412 trig_steps -411 start_pos -103701 trig_pos -104112 halt_pos -104113 +[2026-05-03 06:54:38.640] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999991116 174.00142000004493 -0.05550352207940032 spos -0.05441842558349208 probing_z -0.2519184255835104 +[2026-05-03 06:54:38.640] [info] [gcode.cpp:559] [1885] probe at 126.002,174.001 is z=-0.055504 +[2026-05-03 06:54:38.641] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3492388760000722 +[2026-05-03 06:54:38.642] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999561 +[2026-05-03 06:54:38.642] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013377 +[2026-05-03 06:54:38.643] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7455815744164794 +[2026-05-03 06:54:39.127] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:39.127] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:39.141] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3940658715 +[2026-05-03 06:54:39.143] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 158913789952 trigger_emit_ticks 3940658715 158559481371 +[2026-05-03 06:54:39.145] [info] [homing.cpp:266] [1885] endstop_name probe tt 1322.7455683791609 trigger_time 1322.7455683791609 move_end_print_time 1322.9977553333333 +[2026-05-03 06:54:39.145] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -398 trig_steps -397 start_pos -103713 trig_pos -104110 halt_pos -104111 +[2026-05-03 06:54:40.023] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999991116 174.00142000004493 -0.0570076474061387 spos -0.05691842558348981 probing_z -0.24691842558352062 +[2026-05-03 06:54:40.023] [info] [gcode.cpp:559] [1885] probe at 126.002,174.001 is z=-0.057008 +[2026-05-03 06:54:40.024] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.383047542000213 +[2026-05-03 06:54:40.025] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 126.00153999991115 174.00142000004493 -0.054912827709527594 +[2026-05-03 06:54:40.025] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:54:40.026] [info] [probe.cpp:857] [1885] _move_next 83 probe_points.size 121 + +[2026-05-03 06:54:40.035] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989296 +[2026-05-03 06:54:40.035] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014216 +[2026-05-03 06:54:40.035] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574416599 +[2026-05-03 06:54:41.158] [info] [heaters.cpp:405] [1955] __func__:temperature_callback,heater_name:heater_bed,read_time:1324.77800000038,last_temp:60.02116385181023,temp:60.02116385181023,target_temp:60,smoothed_temp:59.99914274010287 +[2026-05-03 06:54:41.280] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:41.281] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:41.296] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=4199038275 +[2026-05-03 06:54:41.298] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 158913789952 trigger_emit_ticks 4199038275 158817860931 +[2026-05-03 06:54:41.298] [info] [homing.cpp:266] [1885] endstop_name probe tt 1324.89876203812 trigger_time 1324.89876203812 move_end_print_time 1325.151276125 +[2026-05-03 06:54:41.298] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1296 trig_steps -1295 start_pos -102811 trig_pos -104106 halt_pos -104107 +[2026-05-03 06:54:42.195] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 102.0035799998754 174.00142000001756 -0.05867754200659189 spos -0.059418425583373846 probing_z -0.23691842558340115 +[2026-05-03 06:54:42.195] [info] [gcode.cpp:559] [1885] probe at 102.004,174.001 is z=-0.058678 +[2026-05-03 06:54:42.196] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1696174589999373 +[2026-05-03 06:54:42.197] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989296 +[2026-05-03 06:54:42.197] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014216 +[2026-05-03 06:54:42.197] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7605815744165885 +[2026-05-03 06:54:42.688] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:42.690] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:42.708] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=73033738 +[2026-05-03 06:54:42.735] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=73033738 +[2026-05-03 06:54:42.737] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 158913789952 trigger_emit_ticks 73033738 158986823690 +[2026-05-03 06:54:42.739] [info] [homing.cpp:266] [1885] endstop_name probe tt 1326.3068044103607 trigger_time 1326.3068044103607 move_end_print_time 1326.5590508333332 +[2026-05-03 06:54:42.739] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -404 start_pos -103707 trig_pos -104111 halt_pos -104113 +[2026-05-03 06:54:42.814] [info] [heaters.cpp:405] [1963] __func__:temperature_callback,heater_name:extruder,read_time:1326.4336953723705,last_temp:139.84358737575332,temp:139.84358737575332,target_temp:140,smoothed_temp:140.09667526980542 +[2026-05-03 06:54:43.669] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 102.0035799998754 174.00142000001756 -0.06274366658200423 spos -0.061918425583428416 probing_z -0.24941842558341154 +[2026-05-03 06:54:43.670] [info] [gcode.cpp:559] [1885] probe at 102.004,174.001 is z=-0.062744 +[2026-05-03 06:54:43.671] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4743691680000666 +[2026-05-03 06:54:43.672] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989296 +[2026-05-03 06:54:43.672] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014216 +[2026-05-03 06:54:43.672] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7455815744165781 +[2026-05-03 06:54:44.160] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:44.161] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:44.175] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=249275223 trigger_emit_ticks=249659599 +[2026-05-03 06:54:44.177] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 249275223 159163065175 trigger_emit_ticks 249659599 159163449551 +[2026-05-03 06:54:44.177] [info] [homing.cpp:266] [1885] endstop_name probe tt 1327.7787073533393 trigger_time 1327.7787073533393 move_end_print_time 1328.03067775 +[2026-05-03 06:54:44.177] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -399 trig_steps -397 start_pos -103713 trig_pos -104110 halt_pos -104112 +[2026-05-03 06:54:45.006] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 102.0035799998754 174.00142000001756 -0.06243849759565398 spos -0.061918425583428416 probing_z -0.24691842558342192 +[2026-05-03 06:54:45.007] [info] [gcode.cpp:559] [1885] probe at 102.004,174.001 is z=-0.062438 +[2026-05-03 06:54:45.007] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.336651917999916 +[2026-05-03 06:54:45.008] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 102.0035799998754 174.00142000001756 -0.061286568728083364 +[2026-05-03 06:54:45.008] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:54:45.009] [info] [probe.cpp:857] [1885] _move_next 84 probe_points.size 121 + +[2026-05-03 06:54:45.017] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984807 +[2026-05-03 06:54:45.017] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015055 +[2026-05-03 06:54:45.017] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744166977 +[2026-05-03 06:54:46.260] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:46.260] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:46.276] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=501239373 trigger_emit_ticks=501623749 +[2026-05-03 06:54:46.277] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 501239373 159415029325 trigger_emit_ticks 501623749 159415413701 +[2026-05-03 06:54:46.278] [info] [homing.cpp:266] [1885] endstop_name probe tt 1329.8784393160151 trigger_time 1329.8784393160151 move_end_print_time 1330.1309357916666 +[2026-05-03 06:54:46.279] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1289 trig_steps -1288 start_pos -102811 trig_pos -104099 halt_pos -104100 +[2026-05-03 06:54:47.164] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999984876 173.9951899999993 -0.04727639838176764 spos -0.04691842558327153 probing_z -0.2194184255833025 +[2026-05-03 06:54:47.165] [info] [gcode.cpp:559] [1885] probe at 77.999,173.995 is z=-0.047276 +[2026-05-03 06:54:47.167] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1576475009999285 +[2026-05-03 06:54:47.168] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984804 +[2026-05-03 06:54:47.168] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015054 +[2026-05-03 06:54:47.168] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7780815744166867 +[2026-05-03 06:54:47.616] [error] [tmc_uart.cpp:319] [1885] _decode_read error #1 +[2026-05-03 06:54:47.658] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:47.659] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:47.675] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=669061295 trigger_emit_ticks=669445671 +[2026-05-03 06:54:47.677] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 669061295 159582851247 trigger_emit_ticks 669445671 159583235623 +[2026-05-03 06:54:47.678] [info] [homing.cpp:266] [1885] endstop_name probe tt 1331.2769765698117 trigger_time 1331.2769765698117 move_end_print_time 1331.52959875 +[2026-05-03 06:54:47.678] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -410 trig_steps -408 start_pos -103700 trig_pos -104108 halt_pos -104110 +[2026-05-03 06:54:48.506] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999984874 173.9951899999993 -0.04995163080778717 spos -0.0494184255833261 probing_z -0.24191842558331333 +[2026-05-03 06:54:48.507] [info] [gcode.cpp:559] [1885] probe at 77.999,173.995 is z=-0.049952 +[2026-05-03 06:54:48.509] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3416552510000201 +[2026-05-03 06:54:48.510] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984804 +[2026-05-03 06:54:48.510] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015055 +[2026-05-03 06:54:48.510] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7530815744166764 +[2026-05-03 06:54:48.999] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:49.000] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:49.015] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=829968637 trigger_emit_ticks=830353013 +[2026-05-03 06:54:49.017] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 829968637 159743758589 trigger_emit_ticks 830353013 159744142965 +[2026-05-03 06:54:49.018] [info] [homing.cpp:266] [1885] endstop_name probe tt 1332.6178911271027 trigger_time 1332.6178911271027 move_end_print_time 1332.8705797916666 +[2026-05-03 06:54:49.018] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -103710 trig_pos -104109 halt_pos -104110 +[2026-05-03 06:54:49.903] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999984874 173.9951899999993 -0.049724084377928385 spos -0.0494184255833261 probing_z -0.2444184255833236 +[2026-05-03 06:54:49.903] [info] [gcode.cpp:559] [1885] probe at 77.999,173.995 is z=-0.049724 +[2026-05-03 06:54:49.904] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3945792499998788 +[2026-05-03 06:54:49.904] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 77.99938999984874 173.9951899999993 -0.04898403785582773 +[2026-05-03 06:54:49.905] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:54:49.905] [info] [probe.cpp:857] [1885] _move_next 85 probe_points.size 121 + +[2026-05-03 06:54:49.913] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998944 +[2026-05-03 06:54:49.914] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015895 +[2026-05-03 06:54:49.914] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574416796 +[2026-05-03 06:54:51.157] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:51.157] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:51.174] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1089294605 +[2026-05-03 06:54:51.175] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 158913789952 trigger_emit_ticks 1089294605 160003084557 +[2026-05-03 06:54:51.176] [info] [homing.cpp:266] [1885] endstop_name probe tt 1334.775769891516 trigger_time 1334.775769891516 move_end_print_time 1335.027901625 +[2026-05-03 06:54:51.177] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1292 trig_steps -1290 start_pos -102811 trig_pos -104101 halt_pos -104103 +[2026-05-03 06:54:52.067] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 53.99519999986772 174.00142000002666 -0.031861320308358615 spos -0.03191842558322833 probing_z -0.22441842558320424 +[2026-05-03 06:54:52.067] [info] [gcode.cpp:559] [1885] probe at 53.995,174.001 is z=-0.031861 +[2026-05-03 06:54:52.068] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1621886259999883 +[2026-05-03 06:54:52.069] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998944 +[2026-05-03 06:54:52.069] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015893 +[2026-05-03 06:54:52.069] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7705815744167852 +[2026-05-03 06:54:52.560] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:52.561] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:52.574] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1257299031 trigger_emit_ticks=1257683428 +[2026-05-03 06:54:52.576] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1257299031 160171088983 trigger_emit_ticks 1257683428 160171473380 +[2026-05-03 06:54:52.578] [info] [homing.cpp:266] [1885] endstop_name probe tt 1336.1790300449013 trigger_time 1336.1790300449013 move_end_print_time 1336.431190125 +[2026-05-03 06:54:52.578] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -404 start_pos -103703 trig_pos -104107 halt_pos -104109 +[2026-05-03 06:54:53.408] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 53.99519999986773 174.00142000002666 -0.03487737733802329 spos -0.03441842558322605 probing_z -0.2394184255832148 +[2026-05-03 06:54:53.409] [info] [gcode.cpp:559] [1885] probe at 53.995,174.001 is z=-0.034877 +[2026-05-03 06:54:53.409] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.341322916999843 +[2026-05-03 06:54:53.411] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.9966199998944 +[2026-05-03 06:54:53.411] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015892 +[2026-05-03 06:54:53.411] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7555815744167748 +[2026-05-03 06:54:53.896] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:53.896] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:53.913] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1417638205 trigger_emit_ticks=1418022579 +[2026-05-03 06:54:53.914] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1417638205 160331428157 trigger_emit_ticks 1418022579 160331812531 +[2026-05-03 06:54:53.915] [info] [homing.cpp:266] [1885] endstop_name probe tt 1337.5152085569512 trigger_time 1337.5152085569512 move_end_print_time 1337.7671313333333 +[2026-05-03 06:54:53.916] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -401 trig_steps -399 start_pos -103709 trig_pos -104108 halt_pos -104110 +[2026-05-03 06:54:54.806] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 53.99519999986774 174.00142000002666 -0.03560918730426152 spos -0.03441842558322605 probing_z -0.2419184255832253 +[2026-05-03 06:54:54.806] [info] [gcode.cpp:559] [1885] probe at 53.995,174.001 is z=-0.035609 +[2026-05-03 06:54:54.807] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3971973750001325 +[2026-05-03 06:54:54.807] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 53.99519999986773 174.00142000002666 -0.03411596165021447 +[2026-05-03 06:54:54.807] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:54:54.808] [info] [probe.cpp:857] [1885] _move_next 86 probe_points.size 121 + +[2026-05-03 06:54:54.817] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.99865999994074 +[2026-05-03 06:54:54.817] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -144.00418000013082 +[2026-05-03 06:54:54.817] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744168944 +[2026-05-03 06:54:56.061] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:56.062] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:56.077] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1677463851 trigger_emit_ticks=1677848225 +[2026-05-03 06:54:56.079] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1677463851 160591253803 trigger_emit_ticks 1677848225 160591638177 +[2026-05-03 06:54:56.080] [info] [homing.cpp:266] [1885] endstop_name probe tt 1339.6804524959032 trigger_time 1339.6804524959032 move_end_print_time 1339.9321323333334 +[2026-05-03 06:54:56.080] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1295 trig_steps -1294 start_pos -102811 trig_pos -104105 halt_pos -104106 +[2026-05-03 06:54:56.971] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999904963 174.00142000003578 -0.03954094700820662 spos -0.03941842558310782 probing_z -0.23441842558310544 +[2026-05-03 06:54:56.972] [info] [gcode.cpp:559] [1885] probe at 29.997,174.001 is z=-0.039541 +[2026-05-03 06:54:56.972] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.163570166999989 +[2026-05-03 06:54:56.973] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.9986599999407 +[2026-05-03 06:54:56.974] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -144.0041800001308 +[2026-05-03 06:54:56.974] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7630815744168836 +[2026-05-03 06:54:57.463] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:54:57.464] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:54:57.465] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:54:57.484] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1845670529 trigger_emit_ticks=1846054905 +[2026-05-03 06:54:57.486] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1845670529 160759460481 trigger_emit_ticks 1846054905 160759844857 +[2026-05-03 06:54:57.487] [info] [homing.cpp:266] [1885] endstop_name probe tt 1341.082195219989 trigger_time 1341.082195219989 move_end_print_time 1341.3343406666668 +[2026-05-03 06:54:57.487] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -408 trig_steps -407 start_pos -103706 trig_pos -104113 halt_pos -104114 +[2026-05-03 06:54:58.318] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999904963 174.00142000003575 -0.04089772804430089 spos -0.041918425583105545 probing_z -0.25441842558311645 +[2026-05-03 06:54:58.319] [info] [gcode.cpp:559] [1885] probe at 29.997,174.001 is z=-0.040898 +[2026-05-03 06:54:58.320] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.347142583999812 +[2026-05-03 06:54:58.321] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:54:58.322] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:54:58.323] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.326] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.327] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.329] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.331] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.333] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.335] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.337] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.339] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.341] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.343] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.344] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.346] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.348] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.350] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.352] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.353] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.355] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.357] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.358] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.361] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.363] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.364] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.366] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.368] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.370] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.371] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.400] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.462] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.525] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.587] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.650] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.712] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.774] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.837] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.899] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:58.961] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:59.024] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:59.086] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:59.149] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:54:59.211] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:54:59.212] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.9986599999407 +[2026-05-03 06:54:59.212] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -144.0041800001308 +[2026-05-03 06:54:59.212] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.7430815744168522 +[2026-05-03 06:55:01.659] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:01.659] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:01.674] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2349013283 trigger_emit_ticks=2349397657 +[2026-05-03 06:55:01.676] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2349013283 161262803235 trigger_emit_ticks 2349397657 161263187609 +[2026-05-03 06:55:01.677] [info] [homing.cpp:266] [1885] endstop_name probe tt 1345.2767778178718 trigger_time 1345.2767778178718 move_end_print_time 1345.531222125 +[2026-05-03 06:55:01.678] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -792 trig_steps -789 start_pos -103314 trig_pos -104103 halt_pos -104106 +[2026-05-03 06:55:02.578] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999904963 174.00142000003575 -0.0399318197511038 spos -0.03941842558316466 probing_z -0.22941842558314796 +[2026-05-03 06:55:02.578] [info] [gcode.cpp:559] [1885] probe at 29.997,174.001 is z=-0.039932 +[2026-05-03 06:55:02.579] [info] [load_cell_probe.cpp:333] [1885] run_probe time 3.3675246679999873 +[2026-05-03 06:55:02.579] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 29.997239999904963 174.00142000003575 -0.040123498267870435 +[2026-05-03 06:55:02.580] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:55:02.580] [info] [probe.cpp:857] [1885] _move_next 87 probe_points.size 121 + +[2026-05-03 06:55:02.589] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.00069999998706 +[2026-05-03 06:55:02.590] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -168.00214000008444 +[2026-05-03 06:55:02.590] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744169717 +[2026-05-03 06:55:03.838] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:03.853] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2610638447 trigger_emit_ticks=2611022823 +[2026-05-03 06:55:03.854] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2610638447 161524428399 trigger_emit_ticks 2611022823 161524812775 +[2026-05-03 06:55:03.855] [info] [homing.cpp:266] [1885] endstop_name probe tt 1347.457019117197 trigger_time 1347.457019117197 move_end_print_time 1347.708926 +[2026-05-03 06:55:03.855] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1304 trig_steps -1303 start_pos -102811 trig_pos -104114 halt_pos -104115 +[2026-05-03 06:55:04.736] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.9992799999513124 174.00142000003575 -0.043665703246390714 spos -0.044418425582989585 probing_z -0.2569184255830286 +[2026-05-03 06:55:04.737] [info] [gcode.cpp:559] [1885] probe at 5.999,174.001 is z=-0.043666 +[2026-05-03 06:55:04.737] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.15609141799996 +[2026-05-03 06:55:04.738] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.00069999998706 +[2026-05-03 06:55:04.739] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -168.00214000008444 +[2026-05-03 06:55:04.739] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7405815744169613 +[2026-05-03 06:55:05.245] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:05.245] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:05.275] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2779409353 trigger_emit_ticks=2779793750 +[2026-05-03 06:55:05.278] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2779409353 161693199305 trigger_emit_ticks 2779793750 161693583702 +[2026-05-03 06:55:05.279] [info] [homing.cpp:266] [1885] endstop_name probe tt 1348.8634631680907 trigger_time 1348.8634631680907 move_end_print_time 1349.1272725 +[2026-05-03 06:55:05.279] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -412 trig_steps -410 start_pos -103715 trig_pos -104125 halt_pos -104127 +[2026-05-03 06:55:06.207] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.9992799999513124 174.00142000003575 -0.044943935596815254 spos -0.04441842558304643 probing_z -0.28441842558303865 +[2026-05-03 06:55:06.207] [info] [gcode.cpp:559] [1885] probe at 5.999,174.001 is z=-0.044944 +[2026-05-03 06:55:06.208] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.470914250000078 +[2026-05-03 06:55:06.209] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 180.00069999998706 +[2026-05-03 06:55:06.210] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -168.00214000008444 +[2026-05-03 06:55:06.210] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.710581574416951 +[2026-05-03 06:55:06.697] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:06.698] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:06.713] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2953726895 trigger_emit_ticks=2954111269 +[2026-05-03 06:55:06.714] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2953726895 161867516847 trigger_emit_ticks 2954111269 161867901221 +[2026-05-03 06:55:06.715] [info] [homing.cpp:266] [1885] endstop_name probe tt 1350.3161292123557 trigger_time 1350.3161292123557 move_end_print_time 1350.568677125 +[2026-05-03 06:55:06.716] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -399 trig_steps -398 start_pos -103727 trig_pos -104125 halt_pos -104126 +[2026-05-03 06:55:07.547] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.9992799999513124 174.00142000003575 -0.04208897002471107 spos -0.0419184255830487 probing_z -0.284418425583049 +[2026-05-03 06:55:07.548] [info] [gcode.cpp:559] [1885] probe at 5.999,174.001 is z=-0.042089 +[2026-05-03 06:55:07.549] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3399507090000498 +[2026-05-03 06:55:07.549] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 5.9992799999513124 174.00142000003575 -0.04356620295597235 +[2026-05-03 06:55:07.549] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:55:07.550] [info] [probe.cpp:857] [1885] _move_next 88 probe_points.size 121 + +[2026-05-03 06:55:07.559] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.9986599999407 +[2026-05-03 06:55:07.559] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -192.0001000000381 +[2026-05-03 06:55:07.559] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.00058157441707 +[2026-05-03 06:55:08.813] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:08.813] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:08.828] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3207589135 trigger_emit_ticks=3207973511 +[2026-05-03 06:55:08.830] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3207589135 162121379087 trigger_emit_ticks 3207973511 162121763463 +[2026-05-03 06:55:08.831] [info] [homing.cpp:266] [1885] endstop_name probe tt 1352.4316765336014 trigger_time 1352.4316765336014 move_end_print_time 1352.6843044166667 +[2026-05-03 06:55:08.831] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1309 trig_steps -1309 start_pos -102811 trig_pos -104120 halt_pos -104120 +[2026-05-03 06:55:09.720] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.9992799999513124 197.9993799999894 -0.06305610199889508 spos -0.06191842558297367 probing_z -0.2719184255829301 +[2026-05-03 06:55:09.721] [info] [gcode.cpp:559] [1885] probe at 5.999,197.999 is z=-0.063056 +[2026-05-03 06:55:09.721] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.171054875999971 +[2026-05-03 06:55:09.723] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.9986599999407 +[2026-05-03 06:55:09.723] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -192.0001000000381 +[2026-05-03 06:55:09.723] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7280815744170597 +[2026-05-03 06:55:10.222] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:10.222] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:10.240] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3376638191 trigger_emit_ticks=3377022567 +[2026-05-03 06:55:10.242] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3376638191 162290428143 trigger_emit_ticks 3377022567 162290812519 +[2026-05-03 06:55:10.243] [info] [homing.cpp:266] [1885] endstop_name probe tt 1353.840434510242 trigger_time 1353.840434510242 move_end_print_time 1354.0943608333334 +[2026-05-03 06:55:10.244] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -418 trig_steps -416 start_pos -103720 trig_pos -104136 halt_pos -104138 +[2026-05-03 06:55:11.182] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.9992799999513124 197.9993799999894 -0.06798862545878886 spos -0.06691842558291228 probing_z -0.31191842558294036 +[2026-05-03 06:55:11.183] [info] [gcode.cpp:559] [1885] probe at 5.999,197.999 is z=-0.067989 +[2026-05-03 06:55:11.183] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4616040430000794 +[2026-05-03 06:55:11.184] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 203.9986599999407 +[2026-05-03 06:55:11.184] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -192.0001000000381 +[2026-05-03 06:55:11.185] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.6830815744170495 +[2026-05-03 06:55:11.673] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:11.675] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:11.689] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3550861535 trigger_emit_ticks=3551245911 +[2026-05-03 06:55:11.692] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3550861535 162464651487 trigger_emit_ticks 3551245911 162465035863 +[2026-05-03 06:55:11.693] [info] [homing.cpp:266] [1885] endstop_name probe tt 1355.2923095941826 trigger_time 1355.2923095941826 move_end_print_time 1355.5451092916667 +[2026-05-03 06:55:11.693] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -402 trig_steps -401 start_pos -103738 trig_pos -104139 halt_pos -104140 +[2026-05-03 06:55:12.632] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.9992799999513124 197.9993799999894 -0.07285884335518594 spos -0.07191842558296457 probing_z -0.3194184255829504 +[2026-05-03 06:55:12.633] [info] [gcode.cpp:559] [1885] probe at 5.999,197.999 is z=-0.072859 +[2026-05-03 06:55:12.634] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4501416260000042 +[2026-05-03 06:55:12.634] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 5.9992799999513124 197.9993799999894 -0.06796785693762329 +[2026-05-03 06:55:12.634] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:55:12.635] [info] [probe.cpp:857] [1885] _move_next 89 probe_points.size 121 + +[2026-05-03 06:55:12.643] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.99661999989436 +[2026-05-03 06:55:12.643] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -168.00214000008444 +[2026-05-03 06:55:12.644] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744171676 +[2026-05-03 06:55:13.892] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:13.892] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:13.908] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3816909429 trigger_emit_ticks=3817284429 +[2026-05-03 06:55:13.910] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3816909429 162730699381 trigger_emit_ticks 3817284429 162731074381 +[2026-05-03 06:55:13.911] [info] [homing.cpp:266] [1885] endstop_name probe tt 1357.5093188325525 trigger_time 1357.5093188325525 move_end_print_time 1357.763080125 +[2026-05-03 06:55:13.911] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1294 trig_steps -1291 start_pos -102811 trig_pos -104102 halt_pos -104105 +[2026-05-03 06:55:14.843] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999904963 197.9993799999894 -0.019759542620983755 spos -0.019418425582841792 probing_z -0.22691842558283248 +[2026-05-03 06:55:14.844] [info] [gcode.cpp:559] [1885] probe at 29.997,197.999 is z=-0.019760 +[2026-05-03 06:55:14.845] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.2090857929999856 +[2026-05-03 06:55:14.846] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.99661999989436 +[2026-05-03 06:55:14.846] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -168.00214000008444 +[2026-05-03 06:55:14.846] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7655815744171571 +[2026-05-03 06:55:15.337] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:15.337] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:15.351] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3990463147 trigger_emit_ticks=3990847546 +[2026-05-03 06:55:15.353] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3990463147 162904253099 trigger_emit_ticks 3990847546 162904637498 +[2026-05-03 06:55:15.355] [info] [homing.cpp:266] [1885] endstop_name probe tt 1358.9556919398678 trigger_time 1358.9556919398678 move_end_print_time 1359.2076029166667 +[2026-05-03 06:55:15.355] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -405 start_pos -103705 trig_pos -104110 halt_pos -104111 +[2026-05-03 06:55:16.236] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999904963 197.9993799999894 -0.025740402198797557 spos -0.02691842558283497 probing_z -0.24691842558284283 +[2026-05-03 06:55:16.237] [info] [gcode.cpp:559] [1885] probe at 29.997,197.999 is z=-0.025740 +[2026-05-03 06:55:16.237] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3925255009999091 +[2026-05-03 06:55:16.238] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.99661999989436 +[2026-05-03 06:55:16.238] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -168.00214000008444 +[2026-05-03 06:55:16.239] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7505815744171468 +[2026-05-03 06:55:16.727] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:16.743] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=4157610389 +[2026-05-03 06:55:16.745] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 163208757248 trigger_emit_ticks 4157610389 163071400341 +[2026-05-03 06:55:16.747] [info] [homing.cpp:266] [1885] endstop_name probe tt 1360.3453988673498 trigger_time 1360.3453988673498 move_end_print_time 1360.599256625 +[2026-05-03 06:55:16.747] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -398 start_pos -103711 trig_pos -104109 halt_pos -104111 +[2026-05-03 06:55:17.688] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999904963 197.9993799999894 -0.021546049294984243 spos -0.021918425582839518 probing_z -0.2444184255828532 +[2026-05-03 06:55:17.688] [info] [gcode.cpp:559] [1885] probe at 29.997,197.999 is z=-0.021546 +[2026-05-03 06:55:17.690] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4522714590000305 +[2026-05-03 06:55:17.690] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 29.997239999904963 197.9993799999894 -0.02234866470492185 +[2026-05-03 06:55:17.690] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:55:17.691] [info] [probe.cpp:857] [1885] _move_next 90 probe_points.size 121 + +[2026-05-03 06:55:17.700] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.994579999848 +[2026-05-03 06:55:17.700] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -144.0041800001308 +[2026-05-03 06:55:17.700] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744172666 +[2026-05-03 06:55:18.942] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:18.942] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:18.958] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=128482537 +[2026-05-03 06:55:18.959] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 163208757248 trigger_emit_ticks 128482537 163337239785 +[2026-05-03 06:55:18.960] [info] [homing.cpp:266] [1885] endstop_name probe tt 1362.5607573643174 trigger_time 1362.5607573643174 move_end_print_time 1362.8124992916667 +[2026-05-03 06:55:18.960] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1289 trig_steps -1288 start_pos -102811 trig_pos -104099 halt_pos -104100 +[2026-05-03 06:55:19.848] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 53.99519999985861 197.9993799999894 -0.03750416151956279 spos -0.03691842558271219 probing_z -0.2194184255827336 +[2026-05-03 06:55:19.849] [info] [gcode.cpp:559] [1885] probe at 53.995,197.999 is z=-0.037504 +[2026-05-03 06:55:19.850] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1577292089998537 +[2026-05-03 06:55:19.851] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.994579999848 +[2026-05-03 06:55:19.851] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -144.0041800001308 +[2026-05-03 06:55:19.851] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7780815744172556 +[2026-05-03 06:55:20.345] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:20.346] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:20.363] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=296476154 trigger_emit_ticks=296860505 +[2026-05-03 06:55:20.364] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 296476154 163505233402 trigger_emit_ticks 296860505 163505617753 +[2026-05-03 06:55:20.366] [info] [homing.cpp:266] [1885] endstop_name probe tt 1363.963927598241 trigger_time 1363.963927598241 move_end_print_time 1364.2164620833332 +[2026-05-03 06:55:20.366] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -411 trig_steps -410 start_pos -103700 trig_pos -104110 halt_pos -104111 +[2026-05-03 06:55:21.243] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 53.99519999985861 197.9993799999894 -0.038449063856751814 spos -0.039418425582709915 probing_z -0.24691842558274435 +[2026-05-03 06:55:21.243] [info] [gcode.cpp:559] [1885] probe at 53.995,197.999 is z=-0.038449 +[2026-05-03 06:55:21.244] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3941339170000902 +[2026-05-03 06:55:21.245] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.994579999848 +[2026-05-03 06:55:21.245] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -144.0041800001308 +[2026-05-03 06:55:21.245] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7505815744172453 +[2026-05-03 06:55:21.732] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:21.733] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:21.748] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=462936423 trigger_emit_ticks=463320799 +[2026-05-03 06:55:21.750] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 462936423 163671693671 trigger_emit_ticks 463320799 163672078047 +[2026-05-03 06:55:21.751] [info] [homing.cpp:266] [1885] endstop_name probe tt 1365.3511179900095 trigger_time 1365.3511179900095 move_end_print_time 1365.60328775 +[2026-05-03 06:55:21.751] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -398 trig_steps -397 start_pos -103711 trig_pos -104108 halt_pos -104109 +[2026-05-03 06:55:22.579] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 53.99519999985861 197.9993799999894 -0.03831292491075308 spos -0.03941842558276676 probing_z -0.24191842558275478 +[2026-05-03 06:55:22.579] [info] [gcode.cpp:559] [1885] probe at 53.995,197.999 is z=-0.038313 +[2026-05-03 06:55:22.580] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3357564590000948 +[2026-05-03 06:55:22.580] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 53.99519999985861 197.9993799999894 -0.038088716762355895 +[2026-05-03 06:55:22.581] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:55:22.581] [info] [probe.cpp:857] [1885] _move_next 91 probe_points.size 121 + +[2026-05-03 06:55:22.589] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.0049999998929 +[2026-05-03 06:55:22.590] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015889 +[2026-05-03 06:55:22.590] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744173647 +[2026-05-03 06:55:23.830] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:23.845] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=715069291 +[2026-05-03 06:55:23.847] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 163208757248 trigger_emit_ticks 715069291 163923826539 +[2026-05-03 06:55:23.848] [info] [homing.cpp:266] [1885] endstop_name probe tt 1367.4490539852327 trigger_time 1367.4490539852327 move_end_print_time 1367.7021412083334 +[2026-05-03 06:55:23.848] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1286 trig_steps -1285 start_pos -102811 trig_pos -104096 halt_pos -104097 +[2026-05-03 06:55:24.732] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.999389999867 198.0056100000259 -0.026906998004115196 spos -0.026918425582607597 probing_z -0.21191842558263518 +[2026-05-03 06:55:24.732] [info] [gcode.cpp:559] [1885] probe at 77.999,198.006 is z=-0.026907 +[2026-05-03 06:55:24.734] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.151988584000037 +[2026-05-03 06:55:24.735] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.0049999998929 +[2026-05-03 06:55:24.735] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.0062200001589 +[2026-05-03 06:55:24.735] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7855815744173539 +[2026-05-03 06:55:25.227] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:25.227] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:25.242] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=882288675 trigger_emit_ticks=882673049 +[2026-05-03 06:55:25.244] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 882288675 164091045923 trigger_emit_ticks 882673049 164091430297 +[2026-05-03 06:55:25.245] [info] [homing.cpp:266] [1885] endstop_name probe tt 1368.8457730310322 trigger_time 1368.8457730310322 move_end_print_time 1369.09770425 +[2026-05-03 06:55:25.245] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -405 start_pos -103697 trig_pos -104102 halt_pos -104103 +[2026-05-03 06:55:26.177] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999986699 198.0056100000259 -0.027538508448717497 spos -0.02691842558266444 probing_z -0.22691842558264608 +[2026-05-03 06:55:26.178] [info] [gcode.cpp:559] [1885] probe at 77.999,198.006 is z=-0.027539 +[2026-05-03 06:55:26.178] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.444116041999905 +[2026-05-03 06:55:26.179] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.0049999998929 +[2026-05-03 06:55:26.179] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015892 +[2026-05-03 06:55:26.180] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7705815744173431 +[2026-05-03 06:55:26.668] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:26.669] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:26.685] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1055264589 trigger_emit_ticks=1055648963 +[2026-05-03 06:55:26.686] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1055264589 164264021837 trigger_emit_ticks 1055648963 164264406211 +[2026-05-03 06:55:26.687] [info] [homing.cpp:266] [1885] endstop_name probe tt 1370.2872596074615 trigger_time 1370.2872596074615 move_end_print_time 1370.5398903333332 +[2026-05-03 06:55:26.687] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -398 trig_steps -397 start_pos -103703 trig_pos -104100 halt_pos -104101 +[2026-05-03 06:55:27.621] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999986699 198.0056100000259 -0.02536184870846611 spos -0.024418425582666714 probing_z -0.22191842558265695 +[2026-05-03 06:55:27.621] [info] [gcode.cpp:559] [1885] probe at 77.999,198.006 is z=-0.025362 +[2026-05-03 06:55:27.622] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4437897510001676 +[2026-05-03 06:55:27.622] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 77.99938999986699 198.00561000002594 -0.026602451720432935 +[2026-05-03 06:55:27.623] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:55:27.623] [info] [probe.cpp:857] [1885] _move_next 92 probe_points.size 121 + +[2026-05-03 06:55:27.633] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.00295999995603 +[2026-05-03 06:55:27.633] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015052 +[2026-05-03 06:55:27.633] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574417463 +[2026-05-03 06:55:28.868] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:28.868] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:28.884] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1319558511 +[2026-05-03 06:55:28.886] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 163208757248 trigger_emit_ticks 1319558511 164528315759 +[2026-05-03 06:55:28.887] [info] [homing.cpp:266] [1885] endstop_name probe tt 1372.4865372549425 trigger_time 1372.4865372549425 move_end_print_time 1372.738403375 +[2026-05-03 06:55:28.887] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1278 trig_steps -1277 start_pos -102811 trig_pos -104088 halt_pos -104089 +[2026-05-03 06:55:29.615] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 102.00357999990275 197.9993800000533 -0.014467931305210041 spos -0.014418425582505279 probing_z -0.19191842558253702 +[2026-05-03 06:55:29.615] [info] [gcode.cpp:559] [1885] probe at 102.004,197.999 is z=-0.014468 +[2026-05-03 06:55:29.616] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.991513667999925 +[2026-05-03 06:55:29.617] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.00295999995603 +[2026-05-03 06:55:29.617] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015055 +[2026-05-03 06:55:29.617] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8055815744174512 +[2026-05-03 06:55:30.113] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:30.113] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:30.129] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1468568085 trigger_emit_ticks=1468952461 +[2026-05-03 06:55:30.130] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1468568085 164677325333 trigger_emit_ticks 1468952461 164677709709 +[2026-05-03 06:55:30.132] [info] [homing.cpp:266] [1885] endstop_name probe tt 1373.7315048996131 trigger_time 1373.7315048996131 move_end_print_time 1373.9833807083332 +[2026-05-03 06:55:30.132] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -413 trig_steps -412 start_pos -103689 trig_pos -104101 halt_pos -104102 +[2026-05-03 06:55:30.960] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 102.00357999990274 197.9993800000533 -0.01614987260943543 spos -0.01691842558255985 probing_z -0.22441842558254887 +[2026-05-03 06:55:30.961] [info] [gcode.cpp:559] [1885] probe at 102.004,197.999 is z=-0.016150 +[2026-05-03 06:55:30.963] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3463168339999356 +[2026-05-03 06:55:30.964] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.00295999995603 +[2026-05-03 06:55:30.964] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015055 +[2026-05-03 06:55:30.964] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7730815744174404 +[2026-05-03 06:55:31.451] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:31.451] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:31.467] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1629159200 trigger_emit_ticks=1629543537 +[2026-05-03 06:55:31.469] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1629159200 164837916448 trigger_emit_ticks 1629543537 164838300785 +[2026-05-03 06:55:31.470] [info] [homing.cpp:266] [1885] endstop_name probe tt 1375.069783219776 trigger_time 1375.069783219776 move_end_print_time 1375.3227142916667 +[2026-05-03 06:55:31.471] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -396 trig_steps -394 start_pos -103702 trig_pos -104096 halt_pos -104098 +[2026-05-03 06:55:32.306] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 102.00357999990274 197.9993800000533 -0.01686634417153729 spos -0.01691842558255985 probing_z -0.21191842558255958 +[2026-05-03 06:55:32.306] [info] [gcode.cpp:559] [1885] probe at 102.004,197.999 is z=-0.016866 +[2026-05-03 06:55:32.307] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3444716669998797 +[2026-05-03 06:55:32.307] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 102.00357999990274 197.9993800000533 -0.01582804936206092 +[2026-05-03 06:55:32.308] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:55:32.309] [info] [probe.cpp:857] [1885] _move_next 93 probe_points.size 121 + +[2026-05-03 06:55:32.317] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.00092000001916 +[2026-05-03 06:55:32.317] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014216 +[2026-05-03 06:55:32.317] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.00058157441756 +[2026-05-03 06:55:33.556] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:33.557] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:33.571] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1882043150 +[2026-05-03 06:55:33.573] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 163208757248 trigger_emit_ticks 1882043150 165090800398 +[2026-05-03 06:55:33.574] [info] [homing.cpp:266] [1885] endstop_name probe tt 1377.1739766749429 trigger_time 1377.1739766749429 move_end_print_time 1377.42673925 +[2026-05-03 06:55:33.574] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1285 trig_steps -1283 start_pos -102811 trig_pos -104094 halt_pos -104096 +[2026-05-03 06:55:34.464] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.0015399999385 197.99938000008066 -0.039719983652653806 spos -0.0394184255824257 probing_z -0.2069184255824399 +[2026-05-03 06:55:34.464] [info] [gcode.cpp:559] [1885] probe at 126.002,197.999 is z=-0.039720 +[2026-05-03 06:55:34.465] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1560558339999716 +[2026-05-03 06:55:34.466] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.0009200000191 +[2026-05-03 06:55:34.467] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014215 +[2026-05-03 06:55:34.467] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7880815744175491 +[2026-05-03 06:55:34.960] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:34.961] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:34.977] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2050225427 trigger_emit_ticks=2050609803 +[2026-05-03 06:55:34.978] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2050225427 165258982675 trigger_emit_ticks 2050609803 165259367051 +[2026-05-03 06:55:34.979] [info] [homing.cpp:266] [1885] endstop_name probe tt 1378.5787189497494 trigger_time 1378.5787189497494 move_end_print_time 1378.8314020833334 +[2026-05-03 06:55:34.979] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -409 trig_steps -408 start_pos -103696 trig_pos -104104 halt_pos -104105 +[2026-05-03 06:55:35.810] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999993847 197.99938000008063 -0.037880004104079185 spos -0.036918425582484815 probing_z -0.2319184255824509 +[2026-05-03 06:55:35.811] [info] [gcode.cpp:559] [1885] probe at 126.002,197.999 is z=-0.037880 +[2026-05-03 06:55:35.813] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3473362090001046 +[2026-05-03 06:55:35.814] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:55:35.815] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:55:35.817] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.819] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.821] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.823] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.825] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.827] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.829] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.831] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.832] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.835] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.837] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.838] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.840] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.842] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.843] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.845] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.847] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.849] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.850] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.852] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.854] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.856] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.858] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.860] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.861] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.863] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.865] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.894] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:35.956] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:36.018] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:36.081] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:36.144] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:36.206] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:36.269] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:36.331] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:36.393] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:36.455] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:36.517] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:36.581] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:36.642] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:55:36.705] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:55:36.706] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.0009200000191 +[2026-05-03 06:55:36.706] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014218 +[2026-05-03 06:55:36.706] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.7655815744175174 +[2026-05-03 06:55:38.914] [info] [clocksync.cpp:212] [1961] mcu 'bed_sensor': Ignoring clock sample: sent_time=1407.734519504,time_avg=1378.1941706262035,freq=119998325.40369774,diff=61679.57797241211(0.0005139964831034343),stddev=7330.255022411172 +[2026-05-03 06:55:39.152] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:39.153] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:39.169] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=2553510319 +[2026-05-03 06:55:39.171] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 167503724544 trigger_emit_ticks 2553510319 165762267567 +[2026-05-03 06:55:39.172] [info] [homing.cpp:266] [1885] endstop_name probe tt 1382.7696183177434 trigger_time 1382.7696183177434 move_end_print_time 1383.023216125 +[2026-05-03 06:55:39.172] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -791 trig_steps -787 start_pos -103305 trig_pos -104092 halt_pos -104096 +[2026-05-03 06:55:40.073] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999993847 197.99938000008063 -0.038264220425355794 spos -0.03941842558248254 probing_z -0.20191842558248263 +[2026-05-03 06:55:40.074] [info] [gcode.cpp:559] [1885] probe at 126.002,197.999 is z=-0.038264 +[2026-05-03 06:55:40.075] [info] [load_cell_probe.cpp:333] [1885] run_probe time 3.3697225019998314 +[2026-05-03 06:55:40.075] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 126.00153999993847 197.9993800000806 -0.038621402727362926 +[2026-05-03 06:55:40.075] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:55:40.076] [info] [probe.cpp:857] [1885] _move_next 94 probe_points.size 121 + +[2026-05-03 06:55:40.085] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.99888000008224 +[2026-05-03 06:55:40.085] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.999880000133786 +[2026-05-03 06:55:40.085] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574417637 +[2026-05-03 06:55:41.324] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:41.326] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:41.341] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=2814150712 +[2026-05-03 06:55:41.342] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 167503724544 trigger_emit_ticks 2814150712 166022907960 +[2026-05-03 06:55:41.343] [info] [homing.cpp:266] [1885] endstop_name probe tt 1384.9416544205974 trigger_time 1384.9416544205974 move_end_print_time 1385.195443625 +[2026-05-03 06:55:41.344] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1287 trig_steps -1283 start_pos -102811 trig_pos -104094 halt_pos -104098 +[2026-05-03 06:55:42.278] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.99949999997423 197.999380000108 -0.03289276080177969 spos -0.031918425582375676 probing_z -0.20691842558236306 +[2026-05-03 06:55:42.278] [info] [gcode.cpp:559] [1885] probe at 149.999,197.999 is z=-0.032893 +[2026-05-03 06:55:42.279] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.2022765429999254 +[2026-05-03 06:55:42.280] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.9988800000822 +[2026-05-03 06:55:42.281] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013374 +[2026-05-03 06:55:42.281] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7830815744176257 +[2026-05-03 06:55:42.782] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:42.784] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:42.813] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2988740705 trigger_emit_ticks=2989125079 +[2026-05-03 06:55:42.814] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2988740705 166197497953 trigger_emit_ticks 2989125079 166197882327 +[2026-05-03 06:55:42.816] [info] [homing.cpp:266] [1885] endstop_name probe tt 1386.3997958031048 trigger_time 1386.3997958031048 move_end_print_time 1386.6666717916667 +[2026-05-03 06:55:42.817] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -403 trig_steps -401 start_pos -103698 trig_pos -104099 halt_pos -104101 +[2026-05-03 06:55:43.746] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999999742 197.99938000010798 -0.03398575925761502 spos -0.0344184255823734 probing_z -0.21941842558237423 +[2026-05-03 06:55:43.747] [info] [gcode.cpp:559] [1885] probe at 149.999,197.999 is z=-0.033986 +[2026-05-03 06:55:43.747] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4678941670001677 +[2026-05-03 06:55:43.748] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.9988800000822 +[2026-05-03 06:55:43.749] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013377 +[2026-05-03 06:55:43.749] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7755815744176149 +[2026-05-03 06:55:44.240] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:44.241] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:44.254] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3163621555 trigger_emit_ticks=3164005929 +[2026-05-03 06:55:44.256] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3163621555 166372378803 trigger_emit_ticks 3164005929 166372763177 +[2026-05-03 06:55:44.257] [info] [homing.cpp:266] [1885] endstop_name probe tt 1387.8571580152475 trigger_time 1387.8571580152475 move_end_print_time 1388.1108474583334 +[2026-05-03 06:55:44.257] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -405 trig_steps -401 start_pos -103701 trig_pos -104102 halt_pos -104106 +[2026-05-03 06:55:45.188] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9994999999742 197.99938000010798 -0.036286465423932296 spos -0.03691842558237113 probing_z -0.22691842558238506 +[2026-05-03 06:55:45.188] [info] [gcode.cpp:559] [1885] probe at 149.999,197.999 is z=-0.036286 +[2026-05-03 06:55:45.189] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4419401679999737 +[2026-05-03 06:55:45.190] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 149.9994999999742 197.99938000010798 -0.03438832849444234 +[2026-05-03 06:55:45.190] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:55:45.191] [info] [probe.cpp:857] [1885] _move_next 95 probe_points.size 121 + +[2026-05-03 06:55:45.200] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.9968400001453 +[2026-05-03 06:55:45.200] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129942 +[2026-05-03 06:55:45.200] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744177347 +[2026-05-03 06:55:46.439] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:46.440] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:46.455] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3427719041 trigger_emit_ticks=3428103417 +[2026-05-03 06:55:46.457] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3427719041 166636476289 trigger_emit_ticks 3428103417 166636860665 +[2026-05-03 06:55:46.458] [info] [homing.cpp:266] [1885] endstop_name probe tt 1390.0580027868805 trigger_time 1390.0580027868805 move_end_print_time 1390.311134 +[2026-05-03 06:55:46.459] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1285 trig_steps -1284 start_pos -102811 trig_pos -104095 halt_pos -104096 +[2026-05-03 06:55:47.343] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.9974600000077 197.99938000013762 -0.043155125998031146 spos -0.041918425582252894 probing_z -0.2094184255822653 +[2026-05-03 06:55:47.344] [info] [gcode.cpp:559] [1885] probe at 173.997,197.999 is z=-0.043155 +[2026-05-03 06:55:47.345] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1536630840000726 +[2026-05-03 06:55:47.346] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.99684000014526 +[2026-05-03 06:55:47.346] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129928 +[2026-05-03 06:55:47.346] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7880815744177236 +[2026-05-03 06:55:47.836] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:47.837] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:47.851] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3595414103 trigger_emit_ticks=3595789103 +[2026-05-03 06:55:47.853] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3595414103 166804171351 trigger_emit_ticks 3595789103 166804546351 +[2026-05-03 06:55:47.854] [info] [homing.cpp:266] [1885] endstop_name probe tt 1391.455403529873 trigger_time 1391.455403529873 move_end_print_time 1391.707462 +[2026-05-03 06:55:47.854] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -409 trig_steps -408 start_pos -103696 trig_pos -104104 halt_pos -104105 +[2026-05-03 06:55:48.688] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.99746000000766 197.9993800001376 -0.04703559860212933 spos -0.046918425582248346 probing_z -0.23191842558227638 +[2026-05-03 06:55:48.688] [info] [gcode.cpp:559] [1885] probe at 173.997,197.999 is z=-0.047036 +[2026-05-03 06:55:48.689] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3435577089999242 +[2026-05-03 06:55:48.690] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.99684000014526 +[2026-05-03 06:55:48.690] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129928 +[2026-05-03 06:55:48.690] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7655815744177131 +[2026-05-03 06:55:49.181] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:49.181] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:49.195] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3756687353 trigger_emit_ticks=3757062353 +[2026-05-03 06:55:49.199] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3756687353 166965444601 trigger_emit_ticks 3757062353 166965819601 +[2026-05-03 06:55:49.200] [info] [homing.cpp:266] [1885] endstop_name probe tt 1392.7993664697162 trigger_time 1392.7993664697162 move_end_print_time 1393.0519607083334 +[2026-05-03 06:55:49.200] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -403 trig_steps -401 start_pos -103705 trig_pos -104106 halt_pos -104108 +[2026-05-03 06:55:50.035] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.99746000000766 197.9993800001376 -0.04551073284894977 spos -0.044418425582307464 probing_z -0.23691842558228682 +[2026-05-03 06:55:50.035] [info] [gcode.cpp:559] [1885] probe at 173.997,197.999 is z=-0.045511 +[2026-05-03 06:55:50.036] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.347111292000136 +[2026-05-03 06:55:50.036] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 173.99746000000766 197.99938000013762 -0.04523381914970342 +[2026-05-03 06:55:50.037] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:55:50.037] [info] [probe.cpp:857] [1885] _move_next 96 probe_points.size 121 + +[2026-05-03 06:55:50.046] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 395.9948000002084 +[2026-05-03 06:55:50.047] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130941942 +[2026-05-03 06:55:50.047] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574417833 +[2026-05-03 06:55:51.285] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:51.287] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:51.311] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4009175391 trigger_emit_ticks=4009559765 +[2026-05-03 06:55:51.313] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4009175391 167217932639 trigger_emit_ticks 4009559765 167218317013 +[2026-05-03 06:55:51.314] [info] [homing.cpp:266] [1885] endstop_name probe tt 1394.9035415429946 trigger_time 1394.9035415429946 move_end_print_time 1395.15536425 +[2026-05-03 06:55:51.314] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1282 trig_steps -1281 start_pos -102811 trig_pos -104092 halt_pos -104093 +[2026-05-03 06:55:52.197] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 197.99542000003873 197.99938000016965 -0.03659596496008441 spos -0.036918425582143755 probing_z -0.20191842558216733 +[2026-05-03 06:55:52.197] [info] [gcode.cpp:559] [1885] probe at 197.995,197.999 is z=-0.036596 +[2026-05-03 06:55:52.198] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1599878760000593 +[2026-05-03 06:55:52.199] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 395.9948000002084 +[2026-05-03 06:55:52.200] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.0039600001309167965 +[2026-05-03 06:55:52.200] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7955815744178215 +[2026-05-03 06:55:52.695] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:52.711] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4178306732 trigger_emit_ticks=4178691083 +[2026-05-03 06:55:52.713] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4178306732 167387063980 trigger_emit_ticks 4178691083 167387448331 +[2026-05-03 06:55:52.714] [info] [homing.cpp:266] [1885] endstop_name probe tt 1396.312988859004 trigger_time 1396.312988859004 move_end_print_time 1396.5663385416667 +[2026-05-03 06:55:52.714] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -412 trig_steps -411 start_pos -103693 trig_pos -104104 halt_pos -104105 +[2026-05-03 06:55:53.545] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 197.99542000003873 197.99938000016965 -0.04089414473045347 spos -0.04191842558219605 probing_z -0.23191842558217857 +[2026-05-03 06:55:53.545] [info] [gcode.cpp:559] [1885] probe at 197.995,197.999 is z=-0.040894 +[2026-05-03 06:55:53.546] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3474482509998325 +[2026-05-03 06:55:53.547] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 395.9948000002084 +[2026-05-03 06:55:53.547] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.0039600001309167965 +[2026-05-03 06:55:53.547] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7655815744178109 +[2026-05-03 06:55:54.038] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:54.039] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:54.053] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=44608109 trigger_emit_ticks=44983132 +[2026-05-03 06:55:54.054] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 44608109 167548332653 trigger_emit_ticks 44983132 167548707676 +[2026-05-03 06:55:54.055] [info] [homing.cpp:266] [1885] endstop_name probe tt 1397.656835423529 trigger_time 1397.656835423529 move_end_print_time 1397.9088269166666 +[2026-05-03 06:55:54.055] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -403 trig_steps -401 start_pos -103705 trig_pos -104106 halt_pos -104108 +[2026-05-03 06:55:54.987] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 197.99542000003873 197.99938000016965 -0.04357299609925566 spos -0.04441842558219378 probing_z -0.236918425582189 +[2026-05-03 06:55:54.988] [info] [gcode.cpp:559] [1885] probe at 197.995,197.999 is z=-0.043573 +[2026-05-03 06:55:54.989] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4426336680000986 +[2026-05-03 06:55:54.989] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 197.99542000003873 197.99938000016968 -0.04035436859659785 +[2026-05-03 06:55:54.989] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:55:54.990] [info] [probe.cpp:857] [1885] _move_next 97 probe_points.size 121 + +[2026-05-03 06:55:54.999] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 420.00522000027155 +[2026-05-03 06:55:54.999] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.99399999986807 +[2026-05-03 06:55:54.999] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744179305 +[2026-05-03 06:55:56.239] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:56.239] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:56.254] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=309163219 +[2026-05-03 06:55:56.256] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 167503724544 trigger_emit_ticks 309163219 167812887763 +[2026-05-03 06:55:56.257] [info] [homing.cpp:266] [1885] endstop_name probe tt 1399.858365514793 trigger_time 1399.858365514793 move_end_print_time 1400.1100235 +[2026-05-03 06:55:56.258] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1287 trig_steps -1286 start_pos -102811 trig_pos -104097 halt_pos -104098 +[2026-05-03 06:55:57.195] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99961000006982 198.00561000020173 -0.04272886659954442 spos -0.041918425582082364 probing_z -0.21441842558206936 +[2026-05-03 06:55:57.195] [info] [gcode.cpp:559] [1885] probe at 222.000,198.006 is z=-0.042729 +[2026-05-03 06:55:57.196] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.2055355009999857 +[2026-05-03 06:55:57.197] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 420.00522000027155 +[2026-05-03 06:55:57.197] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868095 +[2026-05-03 06:55:57.197] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7830815744179193 +[2026-05-03 06:55:57.692] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:57.693] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:57.706] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=482980404 trigger_emit_ticks=483364757 +[2026-05-03 06:55:57.708] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 482980404 167986704948 trigger_emit_ticks 483364757 167987089301 +[2026-05-03 06:55:57.708] [info] [homing.cpp:266] [1885] endstop_name probe tt 1401.310064884199 trigger_time 1401.310064884199 move_end_print_time 1401.5632317916666 +[2026-05-03 06:55:57.709] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -411 trig_steps -408 start_pos -103698 trig_pos -104106 halt_pos -104109 +[2026-05-03 06:55:58.543] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99961000006982 198.00561000020173 -0.047215134448825496 spos -0.046918425582077816 probing_z -0.23691842558208076 +[2026-05-03 06:55:58.544] [info] [gcode.cpp:559] [1885] probe at 222.000,198.006 is z=-0.047215 +[2026-05-03 06:55:58.545] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3484713749999173 +[2026-05-03 06:55:58.546] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 420.00522000027155 +[2026-05-03 06:55:58.546] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868095 +[2026-05-03 06:55:58.546] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7555815744179089 +[2026-05-03 06:55:59.035] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:55:59.035] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:55:59.050] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=644153773 trigger_emit_ticks=644538147 +[2026-05-03 06:55:59.052] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 644153773 168147878317 trigger_emit_ticks 644538147 168148262691 +[2026-05-03 06:55:59.053] [info] [homing.cpp:266] [1885] endstop_name probe tt 1402.653195854494 trigger_time 1402.653195854494 move_end_print_time 1402.9068834166667 +[2026-05-03 06:55:59.053] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -397 trig_steps -396 start_pos -103709 trig_pos -104105 halt_pos -104106 +[2026-05-03 06:55:59.893] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99961000006982 198.00561000020173 -0.047789663291207235 spos -0.046918425582077816 probing_z -0.23441842558209114 +[2026-05-03 06:55:59.893] [info] [gcode.cpp:559] [1885] probe at 222.000,198.006 is z=-0.047790 +[2026-05-03 06:55:59.894] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3491058759998396 +[2026-05-03 06:55:59.894] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 221.9996100000698 198.00561000020173 -0.045911221446525714 +[2026-05-03 06:55:59.895] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:55:59.895] [info] [probe.cpp:857] [1885] _move_next 98 probe_points.size 121 + +[2026-05-03 06:55:59.904] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 444.0031800003347 +[2026-05-03 06:55:59.904] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.00441999987192 +[2026-05-03 06:55:59.904] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574418028 +[2026-05-03 06:56:01.152] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:01.152] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:01.167] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=898077183 trigger_emit_ticks=898461582 +[2026-05-03 06:56:01.169] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 898077183 168401801727 trigger_emit_ticks 898461582 168402186126 +[2026-05-03 06:56:01.170] [info] [homing.cpp:266] [1885] endstop_name probe tt 1404.7692546103704 trigger_time 1404.7692546103704 move_end_print_time 1405.0223534166666 +[2026-05-03 06:56:01.170] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1301 trig_steps -1297 start_pos -102811 trig_pos -104108 halt_pos -104112 +[2026-05-03 06:56:02.054] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 246.0038000001033 197.99938000023138 -0.060384970808573496 spos -0.05941842558189592 probing_z -0.24191842558197196 +[2026-05-03 06:56:02.055] [info] [gcode.cpp:559] [1885] probe at 246.004,197.999 is z=-0.060385 +[2026-05-03 06:56:02.056] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1594409169999835 +[2026-05-03 06:56:02.057] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 444.0031800003347 +[2026-05-03 06:56:02.057] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.004419999871914 +[2026-05-03 06:56:02.057] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.748081574418018 +[2026-05-03 06:56:02.543] [info] [clocksync.cpp:199] [1961] mcu 'bed_sensor': New minimum RTT: sent_time=1431.3651060989998,half_rtt=0.00015485400012948958,freq=119998324.17436013 +[2026-05-03 06:56:02.548] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:02.549] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:02.564] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1066140696 +[2026-05-03 06:56:02.566] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 167503724544 trigger_emit_ticks 1066140696 168569865240 +[2026-05-03 06:56:02.566] [info] [homing.cpp:266] [1885] endstop_name probe tt 1406.1665990227323 trigger_time 1406.1665990227323 move_end_print_time 1406.4188 +[2026-05-03 06:56:02.567] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -411 trig_steps -409 start_pos -103712 trig_pos -104121 halt_pos -104123 +[2026-05-03 06:56:03.401] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 246.0038000001033 197.99938000023138 -0.0593889378958849 spos -0.05941842558195276 probing_z -0.27441842558198193 +[2026-05-03 06:56:03.402] [info] [gcode.cpp:559] [1885] probe at 246.004,197.999 is z=-0.059389 +[2026-05-03 06:56:03.402] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3468175420000534 +[2026-05-03 06:56:03.404] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 444.0031800003347 +[2026-05-03 06:56:03.404] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 48.004419999871914 +[2026-05-03 06:56:03.404] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7205815744180077 +[2026-05-03 06:56:03.891] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:03.891] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:03.894] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:56:03.906] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1227016905 trigger_emit_ticks=1227401281 +[2026-05-03 06:56:03.908] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1227016905 168730741449 trigger_emit_ticks 1227401281 168731125825 +[2026-05-03 06:56:03.910] [info] [homing.cpp:266] [1885] endstop_name probe tt 1407.510455340913 trigger_time 1407.510455340913 move_end_print_time 1407.762725125 +[2026-05-03 06:56:03.911] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -397 trig_steps -396 start_pos -103723 trig_pos -104119 halt_pos -104120 +[2026-05-03 06:56:04.796] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 246.0038000001033 197.99938000023138 -0.06219934851286188 spos -0.06191842558200733 probing_z -0.26941842558199225 +[2026-05-03 06:56:04.797] [info] [gcode.cpp:559] [1885] probe at 246.004,197.999 is z=-0.062199 +[2026-05-03 06:56:04.797] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3948436680000214 +[2026-05-03 06:56:04.798] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 246.0038000001033 197.99938000023135 -0.060657752405773424 +[2026-05-03 06:56:04.798] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:56:04.799] [info] [probe.cpp:857] [1885] _move_next 99 probe_points.size 121 + +[2026-05-03 06:56:04.807] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 468.0011400003978 +[2026-05-03 06:56:04.807] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868088 +[2026-05-03 06:56:04.807] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574418127 +[2026-05-03 06:56:06.050] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:06.050] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:06.065] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1485909653 trigger_emit_ticks=1486294027 +[2026-05-03 06:56:06.077] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1485909653 trigger_emit_ticks=1486294027 +[2026-05-03 06:56:06.079] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1485909653 168989634197 trigger_emit_ticks 1486294027 168990018571 +[2026-05-03 06:56:06.079] [info] [homing.cpp:266] [1885] endstop_name probe tt 1409.667924007859 trigger_time 1409.667924007859 move_end_print_time 1409.9203865416666 +[2026-05-03 06:56:06.079] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1287 trig_steps -1285 start_pos -102811 trig_pos -104096 halt_pos -104098 +[2026-05-03 06:56:06.963] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.99757000013295 222.00357000026486 -0.03049364552582376 spos -0.02941842558186636 probing_z -0.21191842558187313 +[2026-05-03 06:56:06.963] [info] [gcode.cpp:559] [1885] probe at 245.998,222.004 is z=-0.030494 +[2026-05-03 06:56:06.965] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1652250009999534 +[2026-05-03 06:56:06.966] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 468.0011400003978 +[2026-05-03 06:56:06.966] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868095 +[2026-05-03 06:56:06.966] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7830815744181155 +[2026-05-03 06:56:07.460] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:07.460] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:07.476] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1655226144 trigger_emit_ticks=1655610497 +[2026-05-03 06:56:07.478] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1655226144 169158950688 trigger_emit_ticks 1655610497 169159335041 +[2026-05-03 06:56:07.479] [info] [homing.cpp:266] [1885] endstop_name probe tt 1411.0789149752604 trigger_time 1411.0789149752604 move_end_print_time 1411.3314454583333 +[2026-05-03 06:56:07.480] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -412 trig_steps -411 start_pos -103698 trig_pos -104109 halt_pos -104110 +[2026-05-03 06:56:08.407] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.99757000013295 222.00357000026486 -0.03278762845817704 spos -0.03191842558192093 probing_z -0.24441842558188454 +[2026-05-03 06:56:08.408] [info] [gcode.cpp:559] [1885] probe at 245.998,222.004 is z=-0.032788 +[2026-05-03 06:56:08.409] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.444057500999861 +[2026-05-03 06:56:08.410] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 468.0011400003978 +[2026-05-03 06:56:08.410] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position 23.993999999868095 +[2026-05-03 06:56:08.410] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7530815744181052 +[2026-05-03 06:56:08.898] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:08.898] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:08.900] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:56:08.914] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1827695915 trigger_emit_ticks=1828080289 +[2026-05-03 06:56:08.915] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1827695915 169331420459 trigger_emit_ticks 1828080289 169331804833 +[2026-05-03 06:56:08.916] [info] [homing.cpp:266] [1885] endstop_name probe tt 1412.5161838561844 trigger_time 1412.5161838561844 move_end_print_time 1412.7686192083333 +[2026-05-03 06:56:08.916] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -397 trig_steps -396 start_pos -103710 trig_pos -104106 halt_pos -104107 +[2026-05-03 06:56:09.755] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.99757000013295 222.00357000026486 -0.03137513785250698 spos -0.03191842558192093 probing_z -0.2369184255818948 +[2026-05-03 06:56:09.755] [info] [gcode.cpp:559] [1885] probe at 245.998,222.004 is z=-0.031375 +[2026-05-03 06:56:09.756] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3475068759998976 +[2026-05-03 06:56:09.757] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 245.99757000013292 222.00357000026486 -0.03155213727883593 +[2026-05-03 06:56:09.757] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:56:09.758] [info] [probe.cpp:857] [1885] _move_next 100 probe_points.size 121 + +[2026-05-03 06:56:09.767] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 444.0031800003347 +[2026-05-03 06:56:09.767] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130893026 +[2026-05-03 06:56:09.767] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574418225 +[2026-05-03 06:56:10.999] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:11.000] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:11.015] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2079982745 trigger_emit_ticks=2080367119 +[2026-05-03 06:56:11.018] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2079982745 169583707289 trigger_emit_ticks 2080367119 169584091663 +[2026-05-03 06:56:11.019] [info] [homing.cpp:266] [1885] endstop_name probe tt 1414.6186035456064 trigger_time 1414.6186035456064 move_end_print_time 1414.8707920833333 +[2026-05-03 06:56:11.019] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1272 trig_steps -1271 start_pos -102811 trig_pos -104082 halt_pos -104083 +[2026-05-03 06:56:11.709] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99961000010188 222.0035700002328 -0.00571284126541724 spos -0.006918425581829979 probing_z -0.17691842558177528 +[2026-05-03 06:56:11.709] [info] [gcode.cpp:559] [1885] probe at 222.000,222.004 is z=-0.005713 +[2026-05-03 06:56:11.710] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.951416250999955 +[2026-05-03 06:56:11.711] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 444.0031800003347 +[2026-05-03 06:56:11.711] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130916796 +[2026-05-03 06:56:11.711] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.820581574418213 +[2026-05-03 06:56:12.201] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:12.216] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2224187839 trigger_emit_ticks=2224572215 +[2026-05-03 06:56:12.218] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2224187839 169727912383 trigger_emit_ticks 2224572215 169728296759 +[2026-05-03 06:56:12.219] [info] [homing.cpp:266] [1885] endstop_name probe tt 1415.8203299051308 trigger_time 1415.8203299051308 move_end_print_time 1416.0727233333334 +[2026-05-03 06:56:12.219] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -409 trig_steps -408 start_pos -103683 trig_pos -104091 halt_pos -104092 +[2026-05-03 06:56:13.056] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99961000010188 222.0035700002328 -0.010252321021596539 spos -0.009418425581770862 probing_z -0.19941842558178702 +[2026-05-03 06:56:13.056] [info] [gcode.cpp:559] [1885] probe at 222.000,222.004 is z=-0.010252 +[2026-05-03 06:56:13.057] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3470427090001067 +[2026-05-03 06:56:13.059] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:56:13.060] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:56:13.061] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.063] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.065] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.067] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.069] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.070] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.072] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.074] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.075] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.077] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.078] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.081] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.082] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.084] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.085] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.087] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.089] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.090] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.092] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.093] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.095] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.096] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.098] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.099] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.101] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.103] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.105] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.137] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.200] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.263] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.325] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.389] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.450] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.513] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.575] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.637] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.699] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.762] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.824] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.887] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:13.949] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:56:13.950] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 444.0031800003347 +[2026-05-03 06:56:13.951] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.0039600001309167965 +[2026-05-03 06:56:13.951] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.7980815744181804 +[2026-05-03 06:56:16.399] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:16.400] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:16.415] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2727919779 trigger_emit_ticks=2728304153 +[2026-05-03 06:56:16.428] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2727919779 trigger_emit_ticks=2728304153 +[2026-05-03 06:56:16.430] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2727919779 170231644323 trigger_emit_ticks 2728304153 170232028697 +[2026-05-03 06:56:16.431] [info] [homing.cpp:266] [1885] endstop_name probe tt 1420.0181589058307 trigger_time 1420.0181589058307 move_end_print_time 1420.2703032916668 +[2026-05-03 06:56:16.431] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -796 trig_steps -795 start_pos -103292 trig_pos -104087 halt_pos -104088 +[2026-05-03 06:56:17.318] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99961000010188 222.0035700002328 -0.009809865361797704 spos -0.009418425581827705 probing_z -0.18941842558181965 +[2026-05-03 06:56:17.318] [info] [gcode.cpp:559] [1885] probe at 222.000,222.004 is z=-0.009810 +[2026-05-03 06:56:17.319] [info] [load_cell_probe.cpp:333] [1885] run_probe time 3.3698005430001103 +[2026-05-03 06:56:17.319] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 221.99961000010185 222.0035700002328 -0.008591675882937161 +[2026-05-03 06:56:17.320] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:56:17.321] [info] [probe.cpp:857] [1885] _move_next 101 probe_points.size 121 + +[2026-05-03 06:56:17.329] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 420.00522000027155 +[2026-05-03 06:56:17.329] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129903 +[2026-05-03 06:56:17.329] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744183 +[2026-05-03 06:56:18.558] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:18.559] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:18.574] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2986739421 trigger_emit_ticks=2987114421 +[2026-05-03 06:56:18.576] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2986739421 170490463965 trigger_emit_ticks 2987114421 170490838965 +[2026-05-03 06:56:18.577] [info] [homing.cpp:266] [1885] endstop_name probe tt 1422.1749430639663 trigger_time 1422.1749430639663 move_end_print_time 1422.4293779166667 +[2026-05-03 06:56:18.578] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1267 trig_steps -1263 start_pos -102811 trig_pos -104074 halt_pos -104078 +[2026-05-03 06:56:19.319] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.0016500000708 222.00357000020074 0.005341008719431467 spos 0.005581574418329183 probing_z -0.15691842558170022 +[2026-05-03 06:56:19.320] [info] [gcode.cpp:559] [1885] probe at 198.002,222.004 is z=0.005341 +[2026-05-03 06:56:19.321] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9996962090001489 +[2026-05-03 06:56:19.322] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 420.0052200002715 +[2026-05-03 06:56:19.322] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.0019200001299 +[2026-05-03 06:56:19.322] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8330815744182879 +[2026-05-03 06:56:19.816] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:19.817] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:19.833] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3137934131 trigger_emit_ticks=3138318505 +[2026-05-03 06:56:19.847] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3137934131 170641658675 trigger_emit_ticks 3138318505 170642043049 +[2026-05-03 06:56:19.848] [info] [homing.cpp:266] [1885] endstop_name probe tt 1423.4349930611452 trigger_time 1423.4349930611452 move_end_print_time 1423.687687 +[2026-05-03 06:56:19.848] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -410 trig_steps -409 start_pos -103678 trig_pos -104087 halt_pos -104088 +[2026-05-03 06:56:20.676] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.0016500000708 222.00357000020068 0.0027478976118388287 spos 0.0030815744183314564 probing_z -0.18941842558171207 +[2026-05-03 06:56:20.677] [info] [gcode.cpp:559] [1885] probe at 198.002,222.004 is z=0.002748 +[2026-05-03 06:56:20.678] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.356445334 +[2026-05-03 06:56:20.679] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 420.0052200002715 +[2026-05-03 06:56:20.679] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.00192000012987 +[2026-05-03 06:56:20.679] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8080815744182764 +[2026-05-03 06:56:21.166] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:21.166] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:21.182] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3299872166 trigger_emit_ticks=3300256519 +[2026-05-03 06:56:21.184] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3299872166 170803596710 trigger_emit_ticks 3300256519 170803981063 +[2026-05-03 06:56:21.185] [info] [homing.cpp:266] [1885] endstop_name probe tt 1424.7844941314017 trigger_time 1424.7844941314017 move_end_print_time 1425.0368202916666 +[2026-05-03 06:56:21.185] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -398 trig_steps -397 start_pos -103688 trig_pos -104085 halt_pos -104086 +[2026-05-03 06:56:22.124] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.0016500000708 222.00357000020068 0.003948061213142867 spos 0.0030815744183314564 probing_z -0.1844184255817236 +[2026-05-03 06:56:22.125] [info] [gcode.cpp:559] [1885] probe at 198.002,222.004 is z=0.003948 +[2026-05-03 06:56:22.125] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.447609500999988 +[2026-05-03 06:56:22.126] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 198.00165000007078 222.0035700002007 0.004012322514804388 +[2026-05-03 06:56:22.126] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:56:22.127] [info] [probe.cpp:857] [1885] _move_next 102 probe_points.size 121 + +[2026-05-03 06:56:22.136] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 395.99480000020833 +[2026-05-03 06:56:22.136] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.9998800001337 +[2026-05-03 06:56:22.136] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574418396 +[2026-05-03 06:56:23.363] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:23.363] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:23.379] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3563556913 trigger_emit_ticks=3563941289 +[2026-05-03 06:56:23.381] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3563556913 171067281457 trigger_emit_ticks 3563941289 171067665833 +[2026-05-03 06:56:23.389] [info] [homing.cpp:266] [1885] endstop_name probe tt 1426.9818982421775 trigger_time 1426.9818982421775 move_end_print_time 1427.2344549583333 +[2026-05-03 06:56:23.389] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1265 trig_steps -1264 start_pos -102811 trig_pos -104075 halt_pos -104076 +[2026-05-03 06:56:24.123] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.9974600000373 221.99734000017102 0.009817827825421094 spos 0.010581574418381479 probing_z -0.15941842558160424 +[2026-05-03 06:56:24.123] [info] [gcode.cpp:559] [1885] probe at 173.997,221.997 is z=0.009818 +[2026-05-03 06:56:24.125] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9971686260000752 +[2026-05-03 06:56:24.126] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 395.9948000002083 +[2026-05-03 06:56:24.126] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.999880000133714 +[2026-05-03 06:56:24.126] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8380815744183836 +[2026-05-03 06:56:24.619] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:24.619] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:24.637] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3714279143 trigger_emit_ticks=3714663519 +[2026-05-03 06:56:24.638] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3714279143 171218003687 trigger_emit_ticks 3714663519 171218388063 +[2026-05-03 06:56:24.640] [info] [homing.cpp:266] [1885] endstop_name probe tt 1428.237935184561 trigger_time 1428.237935184561 move_end_print_time 1428.49021625 +[2026-05-03 06:56:24.640] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -410 trig_steps -409 start_pos -103676 trig_pos -104085 halt_pos -104086 +[2026-05-03 06:56:25.577] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.99746000003728 221.997340000171 0.009202831287338925 spos 0.008081574418440596 probing_z -0.18441842558161636 +[2026-05-03 06:56:25.577] [info] [gcode.cpp:559] [1885] probe at 173.997,221.997 is z=0.009203 +[2026-05-03 06:56:25.578] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4531350419999853 +[2026-05-03 06:56:25.579] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 395.9948000002083 +[2026-05-03 06:56:25.579] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.999880000133714 +[2026-05-03 06:56:25.579] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.813081574418372 +[2026-05-03 06:56:26.067] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:26.068] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:26.082] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3887997601 trigger_emit_ticks=3888381977 +[2026-05-03 06:56:26.084] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3887997601 171391722145 trigger_emit_ticks 3888381977 171392106521 +[2026-05-03 06:56:26.084] [info] [homing.cpp:266] [1885] endstop_name probe tt 1429.6856098800743 trigger_time 1429.6856098800743 move_end_print_time 1429.9383006666667 +[2026-05-03 06:56:26.085] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -398 trig_steps -397 start_pos -103686 trig_pos -104083 halt_pos -104084 +[2026-05-03 06:56:26.922] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 173.99746000003728 221.997340000171 0.008935192689711685 spos 0.008081574418383752 probing_z -0.17941842558162802 +[2026-05-03 06:56:26.922] [info] [gcode.cpp:559] [1885] probe at 173.997,221.997 is z=0.008935 +[2026-05-03 06:56:26.923] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3451808340000753 +[2026-05-03 06:56:26.924] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 173.99746000003725 221.997340000171 0.009318617267490567 +[2026-05-03 06:56:26.924] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:56:26.925] [info] [probe.cpp:857] [1885] _move_next 103 probe_points.size 121 + +[2026-05-03 06:56:26.933] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.99684000014514 +[2026-05-03 06:56:26.933] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.9978400001421 +[2026-05-03 06:56:26.933] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744184914 +[2026-05-03 06:56:28.162] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:28.162] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:28.178] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4139230915 trigger_emit_ticks=4139615291 +[2026-05-03 06:56:28.180] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4139230915 171642955459 trigger_emit_ticks 4139615291 171643339835 +[2026-05-03 06:56:28.181] [info] [homing.cpp:266] [1885] endstop_name probe tt 1431.779251926351 trigger_time 1431.779251926351 move_end_print_time 1432.0335124583332 +[2026-05-03 06:56:28.182] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1269 trig_steps -1264 start_pos -102811 trig_pos -104075 halt_pos -104080 +[2026-05-03 06:56:28.923] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.99950000000152 221.99734000014362 0.007272004243439795 spos 0.00808157441849744 probing_z -0.15941842558150876 +[2026-05-03 06:56:28.923] [info] [gcode.cpp:559] [1885] probe at 150.000,221.997 is z=0.007272 +[2026-05-03 06:56:28.925] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9991821670000718 +[2026-05-03 06:56:28.926] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.9968400001451 +[2026-05-03 06:56:28.926] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.9978400001421 +[2026-05-03 06:56:28.926] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8280815744184795 +[2026-05-03 06:56:29.420] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:29.423] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:29.438] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4290328164 trigger_emit_ticks=4290712517 +[2026-05-03 06:56:29.440] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4290328164 171794052708 trigger_emit_ticks 4290712517 171794437061 +[2026-05-03 06:56:29.441] [info] [homing.cpp:266] [1885] endstop_name probe tt 1433.0384136458297 trigger_time 1433.0384136458297 move_end_print_time 1433.2920197083333 +[2026-05-03 06:56:29.441] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -408 trig_steps -407 start_pos -103680 trig_pos -104087 halt_pos -104088 +[2026-05-03 06:56:30.275] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9995000000015 221.9973400001436 0.00877623493567195 spos 0.00808157441849744 probing_z -0.18941842558152056 +[2026-05-03 06:56:30.276] [info] [gcode.cpp:559] [1885] probe at 150.000,221.997 is z=0.008776 +[2026-05-03 06:56:30.277] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3521772089998194 +[2026-05-03 06:56:30.278] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.9968400001451 +[2026-05-03 06:56:30.279] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014208 +[2026-05-03 06:56:30.279] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.808081574418468 +[2026-05-03 06:56:30.766] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:30.767] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:30.781] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=157007273 trigger_emit_ticks=157382273 +[2026-05-03 06:56:30.783] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 157007273 171955699113 trigger_emit_ticks 157382273 171956074113 +[2026-05-03 06:56:30.784] [info] [homing.cpp:266] [1885] endstop_name probe tt 1434.3854086636436 trigger_time 1434.3854086636436 move_end_print_time 1434.6376066666667 +[2026-05-03 06:56:30.785] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -398 start_pos -103688 trig_pos -104086 halt_pos -104088 +[2026-05-03 06:56:31.713] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9995000000015 221.9973400001436 0.009314771709662245 spos 0.00808157441849744 probing_z -0.18691842558153204 +[2026-05-03 06:56:31.713] [info] [gcode.cpp:559] [1885] probe at 150.000,221.997 is z=0.009315 +[2026-05-03 06:56:31.715] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4377505429999928 +[2026-05-03 06:56:31.715] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 149.9995000000015 221.9973400001436 0.008454336962924663 +[2026-05-03 06:56:31.715] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:56:31.716] [info] [probe.cpp:857] [1885] _move_next 104 probe_points.size 121 + +[2026-05-03 06:56:31.725] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.99888000008195 +[2026-05-03 06:56:31.725] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015047 +[2026-05-03 06:56:31.726] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744185873 +[2026-05-03 06:56:32.951] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:32.952] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:32.964] [warning] [tmc.cpp:887] [1885] Stepper stepper_z phase change (was 1 now 0) +[2026-05-03 06:56:32.966] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=419154263 trigger_emit_ticks=419538637 +[2026-05-03 06:56:32.968] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 419154263 172217846103 trigger_emit_ticks 419538637 172218230477 +[2026-05-03 06:56:32.969] [info] [homing.cpp:266] [1885] endstop_name probe tt 1436.5700760685634 trigger_time 1436.5700760685634 move_end_print_time 1436.8225729166666 +[2026-05-03 06:56:32.969] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1263 trig_steps -1261 start_pos -102811 trig_pos -104072 halt_pos -104074 +[2026-05-03 06:56:33.699] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999996574 221.9973400001162 0.029974401120983735 spos 0.030581574418590662 probing_z -0.15191842558141255 +[2026-05-03 06:56:33.699] [info] [gcode.cpp:559] [1885] probe at 126.002,221.997 is z=0.029974 +[2026-05-03 06:56:33.700] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.982894333999866 +[2026-05-03 06:56:33.701] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.99888000008195 +[2026-05-03 06:56:33.701] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015047 +[2026-05-03 06:56:33.701] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8430815744185748 +[2026-05-03 06:56:34.195] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:34.195] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:34.214] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=568823347 +[2026-05-03 06:56:34.217] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 171798691840 trigger_emit_ticks 568823347 172367515187 +[2026-05-03 06:56:34.218] [info] [homing.cpp:266] [1885] endstop_name probe tt 1437.8141327182138 trigger_time 1437.8141327182138 move_end_print_time 1438.0667895 +[2026-05-03 06:56:34.218] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -411 trig_steps -410 start_pos -103674 trig_pos -104084 halt_pos -104085 +[2026-05-03 06:56:35.150] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999996574 221.9973400001162 0.024327344963730818 spos 0.02308157441854064 probing_z -0.18191842558142512 +[2026-05-03 06:56:35.151] [info] [gcode.cpp:559] [1885] probe at 126.002,221.997 is z=0.024327 +[2026-05-03 06:56:35.151] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4512456260001727 +[2026-05-03 06:56:35.153] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.99888000008195 +[2026-05-03 06:56:35.153] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015047 +[2026-05-03 06:56:35.153] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.815581574418563 +[2026-05-03 06:56:35.640] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:35.640] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:35.656] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=741772662 trigger_emit_ticks=742157013 +[2026-05-03 06:56:35.657] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 741772662 172540464502 trigger_emit_ticks 742157013 172540848853 +[2026-05-03 06:56:35.658] [info] [homing.cpp:266] [1885] endstop_name probe tt 1439.258600288596 trigger_time 1439.258600288596 move_end_print_time 1439.5113598333332 +[2026-05-03 06:56:35.659] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -397 trig_steps -396 start_pos -103685 trig_pos -104081 halt_pos -104082 +[2026-05-03 06:56:36.537] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 126.00153999996574 221.9973400001162 0.0251542895135545 spos 0.025581574418538366 probing_z -0.17441842558143694 +[2026-05-03 06:56:36.538] [info] [gcode.cpp:559] [1885] probe at 126.002,221.997 is z=0.025154 +[2026-05-03 06:56:36.538] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.386886043000004 +[2026-05-03 06:56:36.539] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 126.00153999996574 221.9973400001162 0.026485345199423017 +[2026-05-03 06:56:36.539] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:56:36.540] [info] [probe.cpp:857] [1885] _move_next 105 probe_points.size 121 + +[2026-05-03 06:56:36.549] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.0009200000188 +[2026-05-03 06:56:36.549] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015886 +[2026-05-03 06:56:36.549] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744186823 +[2026-05-03 06:56:37.774] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:37.775] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:37.791] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=997701467 trigger_emit_ticks=998085841 +[2026-05-03 06:56:37.792] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 997701467 172796393307 trigger_emit_ticks 998085841 172796777681 +[2026-05-03 06:56:37.793] [info] [homing.cpp:266] [1885] endstop_name probe tt 1441.3913700602618 trigger_time 1441.3913700602618 move_end_print_time 1441.6450450833333 +[2026-05-03 06:56:37.794] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1261 trig_steps -1258 start_pos -102811 trig_pos -104069 halt_pos -104072 +[2026-05-03 06:56:38.538] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999992998 222.00357000008884 0.0295436761649657 spos 0.03058157441870435 probing_z -0.14441842558131768 +[2026-05-03 06:56:38.538] [info] [gcode.cpp:559] [1885] probe at 101.997,222.004 is z=0.029544 +[2026-05-03 06:56:38.539] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9978689179999947 +[2026-05-03 06:56:38.540] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.0009200000188 +[2026-05-03 06:56:38.540] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015886 +[2026-05-03 06:56:38.540] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.84808157441867 +[2026-05-03 06:56:38.994] [info] [clocksync.cpp:199] [1955] mcu 'mcu': New minimum RTT: sent_time=1467.816988616,half_rtt=6.825000002663728e-05,freq=23999999.76871937 +[2026-05-03 06:56:39.034] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:39.034] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:39.036] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:56:39.054] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1149101544 trigger_emit_ticks=1149485897 +[2026-05-03 06:56:39.055] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1149101544 172947793384 trigger_emit_ticks 1149485897 172948177737 +[2026-05-03 06:56:39.056] [info] [homing.cpp:266] [1885] endstop_name probe tt 1442.653054668482 trigger_time 1442.653054668482 move_end_print_time 1442.9056674583333 +[2026-05-03 06:56:39.056] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -410 trig_steps -409 start_pos -103672 trig_pos -104081 halt_pos -104082 +[2026-05-03 06:56:39.989] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999992998 222.00357000008884 0.02371029549541606 spos 0.023081574418654327 probing_z -0.17441842558132992 +[2026-05-03 06:56:39.989] [info] [gcode.cpp:559] [1885] probe at 101.997,222.004 is z=0.023710 +[2026-05-03 06:56:39.990] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4513034180001796 +[2026-05-03 06:56:39.991] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.0009200000188 +[2026-05-03 06:56:39.991] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015886 +[2026-05-03 06:56:39.991] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8230815744186583 +[2026-05-03 06:56:40.480] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:40.481] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:40.484] [info] [serialhdl.cpp:507] [1961] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 06:56:40.497] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1322645421 trigger_emit_ticks=1323029797 +[2026-05-03 06:56:40.498] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1322645421 173121337261 trigger_emit_ticks 1323029797 173121721637 +[2026-05-03 06:56:40.499] [info] [homing.cpp:266] [1885] endstop_name probe tt 1444.0992741622695 trigger_time 1444.0992741622695 move_end_print_time 1444.352222125 +[2026-05-03 06:56:40.500] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -399 trig_steps -397 start_pos -103682 trig_pos -104079 halt_pos -104081 +[2026-05-03 06:56:41.442] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999992998 222.00357000008884 0.02724309447548126 spos 0.02808157441864978 probing_z -0.1694184255813418 +[2026-05-03 06:56:41.442] [info] [gcode.cpp:559] [1885] probe at 101.997,222.004 is z=0.027243 +[2026-05-03 06:56:41.443] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4527448339999864 +[2026-05-03 06:56:41.443] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 101.99734999993 222.00357000008884 0.026832355378621008 +[2026-05-03 06:56:41.444] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:56:41.444] [info] [probe.cpp:857] [1885] _move_next 106 probe_points.size 121 + +[2026-05-03 06:56:41.453] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999557 +[2026-05-03 06:56:41.453] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -144.00418000013076 +[2026-05-03 06:56:41.453] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574418778 +[2026-05-03 06:56:41.658] [info] [heaters.cpp:405] [1955] __func__:temperature_callback,heater_name:heater_bed,read_time:1445.27800000038,last_temp:59.962147766105886,temp:59.962147766105886,target_temp:60,smoothed_temp:59.97557323429008 +[2026-05-03 06:56:42.682] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:42.683] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:42.696] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1587206695 +[2026-05-03 06:56:42.698] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 171798691840 trigger_emit_ticks 1587206695 173385898535 +[2026-05-03 06:56:42.699] [info] [homing.cpp:266] [1885] endstop_name probe tt 1446.3007802563504 trigger_time 1446.3007802563504 move_end_print_time 1446.5534375833333 +[2026-05-03 06:56:42.699] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1270 trig_steps -1268 start_pos -102811 trig_pos -104079 halt_pos -104081 +[2026-05-03 06:56:42.816] [info] [heaters.cpp:405] [1963] __func__:temperature_callback,heater_name:extruder,read_time:1446.4352191638868,last_temp:141.02069256172473,temp:141.02069256172473,target_temp:140,smoothed_temp:140.9920086440251 +[2026-05-03 06:56:43.426] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999991247 222.00357000004323 0.018143299461619772 spos 0.01808157441877256 probing_z -0.1694184255812221 +[2026-05-03 06:56:43.427] [info] [gcode.cpp:559] [1885] probe at 77.999,222.004 is z=0.018143 +[2026-05-03 06:56:43.428] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9830219600000873 +[2026-05-03 06:56:43.429] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999557 +[2026-05-03 06:56:43.429] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -144.00418000013073 +[2026-05-03 06:56:43.429] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8255815744187657 +[2026-05-03 06:56:43.922] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:43.923] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:43.937] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1735548065 trigger_emit_ticks=1735932439 +[2026-05-03 06:56:43.939] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1735548065 173534239905 trigger_emit_ticks 1735932439 173534624279 +[2026-05-03 06:56:43.940] [info] [homing.cpp:266] [1885] endstop_name probe tt 1447.540179854953 trigger_time 1447.540179854953 move_end_print_time 1447.7935016666668 +[2026-05-03 06:56:43.940] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -407 trig_steps -406 start_pos -103681 trig_pos -104087 halt_pos -104088 +[2026-05-03 06:56:44.870] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999991248 222.00357000004323 0.018341642102932237 spos 0.018081574418829405 probing_z -0.18941842558123445 +[2026-05-03 06:56:44.871] [info] [gcode.cpp:559] [1885] probe at 77.999,222.004 is z=0.018342 +[2026-05-03 06:56:44.872] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4438617089999752 +[2026-05-03 06:56:44.873] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.0029599999557 +[2026-05-03 06:56:44.873] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -144.0041800001307 +[2026-05-03 06:56:44.873] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8080815744187541 +[2026-05-03 06:56:45.375] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:45.376] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:45.407] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1909938719 trigger_emit_ticks=1910323095 +[2026-05-03 06:56:45.409] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1909938719 173708630559 trigger_emit_ticks 1910323095 173709014935 +[2026-05-03 06:56:45.410] [info] [homing.cpp:266] [1885] endstop_name probe tt 1448.9934571288202 trigger_time 1448.9934571288202 move_end_print_time 1449.261457 +[2026-05-03 06:56:45.411] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -398 trig_steps -396 start_pos -103688 trig_pos -104084 halt_pos -104086 +[2026-05-03 06:56:46.341] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.9993899999125 222.0035700000432 0.016980623437391068 spos 0.01808157441877256 probing_z -0.18191842558124593 +[2026-05-03 06:56:46.341] [info] [gcode.cpp:559] [1885] probe at 77.999,222.004 is z=0.016981 +[2026-05-03 06:56:46.342] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4697950009999659 +[2026-05-03 06:56:46.342] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 77.99938999991248 222.0035700000432 0.01782185500064769 +[2026-05-03 06:56:46.343] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:56:46.343] [info] [probe.cpp:857] [1885] _move_next 107 probe_points.size 121 + +[2026-05-03 06:56:46.351] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989256 +[2026-05-03 06:56:46.352] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -168.00214000008432 +[2026-05-03 06:56:46.352] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744188737 +[2026-05-03 06:56:47.581] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:47.581] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:47.595] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=2175061439 +[2026-05-03 06:56:47.597] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 171798691840 trigger_emit_ticks 2175061439 173973753279 +[2026-05-03 06:56:47.597] [info] [homing.cpp:266] [1885] endstop_name probe tt 1451.1996396134703 trigger_time 1451.1996396134703 move_end_print_time 1451.452246125 +[2026-05-03 06:56:47.598] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1268 trig_steps -1267 start_pos -102811 trig_pos -104078 halt_pos -104079 +[2026-05-03 06:56:48.328] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.00142999990412 222.00356999998843 0.03645018358111776 spos 0.03558157441887033 probing_z -0.16691842558112624 +[2026-05-03 06:56:48.328] [info] [gcode.cpp:559] [1885] probe at 54.001,222.004 is z=0.036450 +[2026-05-03 06:56:48.329] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9847280420001425 +[2026-05-03 06:56:48.330] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989256 +[2026-05-03 06:56:48.330] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -168.0021400000843 +[2026-05-03 06:56:48.330] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8305815744188618 +[2026-05-03 06:56:48.822] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:48.838] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2323678417 trigger_emit_ticks=2324062793 +[2026-05-03 06:56:48.839] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2323678417 174122370257 trigger_emit_ticks 2324062793 174122754633 +[2026-05-03 06:56:48.841] [info] [homing.cpp:266] [1885] endstop_name probe tt 1452.4413319652042 trigger_time 1452.4413319652042 move_end_print_time 1452.6933740416666 +[2026-05-03 06:56:48.841] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -409 trig_steps -408 start_pos -103679 trig_pos -104087 halt_pos -104088 +[2026-05-03 06:56:49.773] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.00142999990413 222.00356999998843 0.035899343490232855 spos 0.03558157441887033 probing_z -0.1894184255811382 +[2026-05-03 06:56:49.773] [info] [gcode.cpp:559] [1885] probe at 54.001,222.004 is z=0.035899 +[2026-05-03 06:56:49.774] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.444926543000065 +[2026-05-03 06:56:49.775] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:56:49.776] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:56:49.777] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.781] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.783] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.784] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.786] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.788] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.789] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.791] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.793] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.795] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.796] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.798] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.800] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.803] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.804] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.806] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.808] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.810] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.812] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.814] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.816] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.818] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.820] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.822] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.823] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.825] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.827] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.856] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.918] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:49.979] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:50.042] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:50.104] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:50.167] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:50.230] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:50.292] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:50.354] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:50.417] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:50.478] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:50.542] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:50.604] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:56:50.666] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:56:50.667] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989256 +[2026-05-03 06:56:50.667] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -168.0021400000843 +[2026-05-03 06:56:50.667] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.808081574418829 +[2026-05-03 06:56:53.113] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:53.128] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2838509809 trigger_emit_ticks=2838894208 +[2026-05-03 06:56:53.130] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2838509809 174637201649 trigger_emit_ticks 2838894208 174637586048 +[2026-05-03 06:56:53.131] [info] [homing.cpp:266] [1885] endstop_name probe tt 1456.7316539958783 trigger_time 1456.7316539958783 move_end_print_time 1456.9838439166667 +[2026-05-03 06:56:53.131] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -789 trig_steps -788 start_pos -103288 trig_pos -104076 halt_pos -104077 +[2026-05-03 06:56:54.073] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.00142999990413 222.00356999998843 0.03740700118700205 spos 0.038081574418811215 probing_z -0.16191842558117098 +[2026-05-03 06:56:54.073] [info] [gcode.cpp:559] [1885] probe at 54.001,222.004 is z=0.037407 +[2026-05-03 06:56:54.074] [info] [load_cell_probe.cpp:333] [1885] run_probe time 3.408161001000053 +[2026-05-03 06:56:54.074] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 54.00142999990413 222.0035699999884 0.036585509419450886 +[2026-05-03 06:56:54.075] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:56:54.075] [info] [probe.cpp:857] [1885] _move_next 108 probe_points.size 121 + +[2026-05-03 06:56:54.084] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984767 +[2026-05-03 06:56:54.084] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -192.00010000003795 +[2026-05-03 06:56:54.084] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744189483 +[2026-05-03 06:56:55.322] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:55.322] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:55.337] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3103625357 trigger_emit_ticks=3104009733 +[2026-05-03 06:56:55.338] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3103625357 174902317197 trigger_emit_ticks 3104009733 174902701573 +[2026-05-03 06:56:55.339] [info] [homing.cpp:266] [1885] endstop_name probe tt 1458.9409834416292 trigger_time 1458.9409834416292 move_end_print_time 1459.1931713333333 +[2026-05-03 06:56:55.339] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1289 trig_steps -1287 start_pos -102811 trig_pos -104098 halt_pos -104100 +[2026-05-03 06:56:56.284] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.997239999904863 221.99733999994282 -0.016431494718653433 spos -0.01691842558108192 probing_z -0.2169184255810519 +[2026-05-03 06:56:56.285] [info] [gcode.cpp:559] [1885] probe at 29.997,221.997 is z=-0.016431 +[2026-05-03 06:56:56.285] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.20922408499996 +[2026-05-03 06:56:56.286] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984764 +[2026-05-03 06:56:56.287] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -192.00010000003795 +[2026-05-03 06:56:56.287] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7780815744189373 +[2026-05-03 06:56:56.781] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:56.781] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:56.797] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3278668518 trigger_emit_ticks=3279052871 +[2026-05-03 06:56:56.798] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3278668518 175077360358 trigger_emit_ticks 3279052871 175077744711 +[2026-05-03 06:56:56.799] [info] [homing.cpp:266] [1885] endstop_name probe tt 1460.3996978888126 trigger_time 1460.3996978888126 move_end_print_time 1460.6525380416667 +[2026-05-03 06:56:56.799] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -412 trig_steps -411 start_pos -103700 trig_pos -104111 halt_pos -104112 +[2026-05-03 06:56:57.675] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.99723999990485 221.9973399999428 -0.022729246021928134 spos -0.02191842558102053 probing_z -0.24941842558106275 +[2026-05-03 06:56:57.675] [info] [gcode.cpp:559] [1885] probe at 29.997,221.997 is z=-0.022729 +[2026-05-03 06:56:57.676] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3907416669999293 +[2026-05-03 06:56:57.677] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984764 +[2026-05-03 06:56:57.677] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -192.00010000003795 +[2026-05-03 06:56:57.678] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7480815744189271 +[2026-05-03 06:56:58.163] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:56:58.164] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:56:58.178] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3444631399 trigger_emit_ticks=3445006399 +[2026-05-03 06:56:58.180] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3444631399 175243323239 trigger_emit_ticks 3445006399 175243698239 +[2026-05-03 06:56:58.180] [info] [homing.cpp:266] [1885] endstop_name probe tt 1461.7826638611077 trigger_time 1461.7826638611077 move_end_print_time 1462.034708625 +[2026-05-03 06:56:58.181] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -396 trig_steps -395 start_pos -103712 trig_pos -104107 halt_pos -104108 +[2026-05-03 06:56:59.070] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 29.99723999990485 221.9973399999428 -0.020072309023537488 spos -0.019418425581079646 probing_z -0.23941842558107296 +[2026-05-03 06:56:59.070] [info] [gcode.cpp:559] [1885] probe at 29.997,221.997 is z=-0.020072 +[2026-05-03 06:56:59.071] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3946667499999421 +[2026-05-03 06:56:59.071] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 29.997239999904853 221.99733999994282 -0.019744349921373017 +[2026-05-03 06:56:59.072] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:56:59.073] [info] [probe.cpp:857] [1885] _move_next 109 probe_points.size 121 + +[2026-05-03 06:56:59.082] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.996619999894 +[2026-05-03 06:56:59.082] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -215.9980599999916 +[2026-05-03 06:56:59.082] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744190465 +[2026-05-03 06:57:00.334] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:00.335] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:00.351] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3705137087 trigger_emit_ticks=3705521463 +[2026-05-03 06:57:00.353] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3705137087 175503828927 trigger_emit_ticks 3705521463 175504213303 +[2026-05-03 06:57:00.354] [info] [homing.cpp:266] [1885] endstop_name probe tt 1463.9536538514315 trigger_time 1463.9536538514315 move_end_print_time 1464.2056241666667 +[2026-05-03 06:57:00.354] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1312 trig_steps -1311 start_pos -102811 trig_pos -104122 halt_pos -104123 +[2026-05-03 06:57:01.239] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999951199 221.9973399999428 -0.056998907938042576 spos -0.05691842558093185 probing_z -0.27691842558095336 +[2026-05-03 06:57:01.239] [info] [gcode.cpp:559] [1885] probe at 5.999,221.997 is z=-0.056999 +[2026-05-03 06:57:01.240] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1668136680000316 +[2026-05-03 06:57:01.241] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.996619999894 +[2026-05-03 06:57:01.241] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -215.9980599999916 +[2026-05-03 06:57:01.241] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.720581574419036 +[2026-05-03 06:57:01.736] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:01.737] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:01.751] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3873204089 trigger_emit_ticks=3873588463 +[2026-05-03 06:57:01.753] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3873204089 175671895929 trigger_emit_ticks 3873588463 175672280303 +[2026-05-03 06:57:01.754] [info] [homing.cpp:266] [1885] endstop_name probe tt 1465.3542332425047 trigger_time 1465.3542332425047 move_end_print_time 1465.6073957916667 +[2026-05-03 06:57:01.754] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -419 trig_steps -415 start_pos -103723 trig_pos -104138 halt_pos -104142 +[2026-05-03 06:57:02.582] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999951199 221.9973399999428 -0.06821527339482863 spos -0.06941842558097733 probing_z -0.31691842558096406 +[2026-05-03 06:57:02.583] [info] [gcode.cpp:559] [1885] probe at 5.999,221.997 is z=-0.068215 +[2026-05-03 06:57:02.584] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3433993339999688 +[2026-05-03 06:57:02.585] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 227.996619999894 +[2026-05-03 06:57:02.585] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -215.9980599999916 +[2026-05-03 06:57:02.585] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.6730815744190257 +[2026-05-03 06:57:03.071] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:03.071] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:03.087] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4033498233 trigger_emit_ticks=4033882609 +[2026-05-03 06:57:03.089] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4033498233 175832190073 trigger_emit_ticks 4033882609 175832574449 +[2026-05-03 06:57:03.090] [info] [homing.cpp:266] [1885] endstop_name probe tt 1466.690037293694 trigger_time 1466.690037293694 move_end_print_time 1466.9428028333334 +[2026-05-03 06:57:03.090] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -394 trig_steps -393 start_pos -103742 trig_pos -104135 halt_pos -104136 +[2026-05-03 06:57:03.933] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999951199 221.9973399999428 -0.0667685086456496 spos -0.0669184255809796 probing_z -0.3094184255809743 +[2026-05-03 06:57:03.933] [info] [gcode.cpp:559] [1885] probe at 5.999,221.997 is z=-0.066769 +[2026-05-03 06:57:03.935] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.350594959000091 +[2026-05-03 06:57:03.935] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 5.999279999951199 221.9973399999428 -0.06399422999284027 +[2026-05-03 06:57:03.935] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:57:03.936] [info] [probe.cpp:857] [1885] _move_next 110 probe_points.size 121 + +[2026-05-03 06:57:03.945] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984764 +[2026-05-03 06:57:03.945] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -239.99601999994525 +[2026-05-03 06:57:03.945] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574419144 +[2026-05-03 06:57:05.200] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:05.200] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:05.214] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=4289308050 +[2026-05-03 06:57:05.216] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 176093659136 trigger_emit_ticks 4289308050 176087999890 +[2026-05-03 06:57:05.217] [info] [homing.cpp:266] [1885] endstop_name probe tt 1468.8186147343545 trigger_time 1468.8186147343545 move_end_print_time 1469.0711412916667 +[2026-05-03 06:57:05.217] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1308 trig_steps -1307 start_pos -102811 trig_pos -104118 halt_pos -104119 +[2026-05-03 06:57:06.098] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999951199 245.99529999989645 -0.03707064619838449 spos -0.036918425580836356 probing_z -0.2669184255808559 +[2026-05-03 06:57:06.099] [info] [gcode.cpp:559] [1885] probe at 5.999,245.995 is z=-0.037071 +[2026-05-03 06:57:06.101] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1632988339999883 +[2026-05-03 06:57:06.102] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984764 +[2026-05-03 06:57:06.102] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -239.99601999994525 +[2026-05-03 06:57:06.102] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.730581574419134 +[2026-05-03 06:57:06.599] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:06.599] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:06.616] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=161921815 trigger_emit_ticks=162306212 +[2026-05-03 06:57:06.618] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 161921815 176255580951 trigger_emit_ticks 162306212 176255965348 +[2026-05-03 06:57:06.619] [info] [homing.cpp:266] [1885] endstop_name probe tt 1470.218348028052 trigger_time 1470.218348028052 move_end_print_time 1470.4708345416666 +[2026-05-03 06:57:06.619] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -416 trig_steps -415 start_pos -103719 trig_pos -104134 halt_pos -104135 +[2026-05-03 06:57:07.445] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999951199 245.99529999989645 -0.04382580820114995 spos -0.04441842558088638 probing_z -0.3069184255808661 +[2026-05-03 06:57:07.445] [info] [gcode.cpp:559] [1885] probe at 5.999,245.995 is z=-0.043826 +[2026-05-03 06:57:07.446] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3451657929999783 +[2026-05-03 06:57:07.447] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 251.99457999984764 +[2026-05-03 06:57:07.447] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -239.99601999994525 +[2026-05-03 06:57:07.447] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.6905815744191237 +[2026-05-03 06:57:07.938] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:07.939] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:07.953] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=322988922 +[2026-05-03 06:57:07.955] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 176093659136 trigger_emit_ticks 322988922 176416648058 +[2026-05-03 06:57:07.956] [info] [homing.cpp:266] [1885] endstop_name probe tt 1471.5573908481088 trigger_time 1471.5573908481088 move_end_print_time 1471.809598125 +[2026-05-03 06:57:07.956] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -103735 trig_pos -104134 halt_pos -104135 +[2026-05-03 06:57:08.787] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 5.999279999951199 245.99529999989645 -0.0439299607368015 spos -0.04441842558088638 probing_z -0.30691842558087634 +[2026-05-03 06:57:08.788] [info] [gcode.cpp:559] [1885] probe at 5.999,245.995 is z=-0.043930 +[2026-05-03 06:57:08.789] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3429065419998096 +[2026-05-03 06:57:08.789] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 5.999279999951199 245.99529999989645 -0.04160880504544531 +[2026-05-03 06:57:08.790] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:57:08.790] [info] [probe.cpp:857] [1885] _move_next 111 probe_points.size 121 + +[2026-05-03 06:57:08.799] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.00499999989256 +[2026-05-03 06:57:08.799] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -215.9980599999916 +[2026-05-03 06:57:08.799] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574419242 +[2026-05-03 06:57:10.043] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:10.043] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:10.063] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=575184257 trigger_emit_ticks=575568631 +[2026-05-03 06:57:10.065] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 575184257 176668843393 trigger_emit_ticks 575568631 176669227767 +[2026-05-03 06:57:10.067] [info] [homing.cpp:266] [1885] endstop_name probe tt 1473.6622546468725 trigger_time 1473.6622546468725 move_end_print_time 1473.9140254583333 +[2026-05-03 06:57:10.067] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1286 trig_steps -1285 start_pos -102811 trig_pos -104096 halt_pos -104097 +[2026-05-03 06:57:11.002] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 30.003469999950482 246.00152999994208 0.0025929923906402863 spos 0.0030815744192977945 probing_z -0.21191842558075802 +[2026-05-03 06:57:11.002] [info] [gcode.cpp:559] [1885] probe at 30.003,246.002 is z=0.002593 +[2026-05-03 06:57:11.003] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.2115438759999506 +[2026-05-03 06:57:11.004] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.0049999998925 +[2026-05-03 06:57:11.004] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -215.99805999999157 +[2026-05-03 06:57:11.004] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.785581574419231 +[2026-05-03 06:57:11.501] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:11.509] [info] [clocksync.cpp:199] [1961] mcu 'bed_sensor': New minimum RTT: sent_time=1500.328354881,half_rtt=0.00015212499999961437,freq=119998322.9157774 +[2026-05-03 06:57:11.520] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=750430117 +[2026-05-03 06:57:11.522] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 176093659136 trigger_emit_ticks 750430117 176844089253 +[2026-05-03 06:57:11.523] [info] [homing.cpp:266] [1885] endstop_name probe tt 1475.1194514463214 trigger_time 1475.1194514463214 move_end_print_time 1475.3717743333334 +[2026-05-03 06:57:11.524] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -415 trig_steps -414 start_pos -103697 trig_pos -104111 halt_pos -104112 +[2026-05-03 06:57:12.351] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 30.003469999950468 246.00152999994202 -0.0038217939053251937 spos -0.004418425580752228 probing_z -0.24941842558076888 +[2026-05-03 06:57:12.352] [info] [gcode.cpp:559] [1885] probe at 30.003,246.002 is z=-0.003822 +[2026-05-03 06:57:12.352] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.349419958999988 +[2026-05-03 06:57:12.353] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 276.0049999998925 +[2026-05-03 06:57:12.354] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -215.99805999999154 +[2026-05-03 06:57:12.354] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7480815744192207 +[2026-05-03 06:57:12.842] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:12.843] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:12.857] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=911014299 trigger_emit_ticks=911398675 +[2026-05-03 06:57:12.858] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 911014299 177004673435 trigger_emit_ticks 911398675 177005057811 +[2026-05-03 06:57:12.859] [info] [homing.cpp:266] [1885] endstop_name probe tt 1476.4608731804233 trigger_time 1476.4608731804233 move_end_print_time 1476.713479125 +[2026-05-03 06:57:12.860] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -397 start_pos -103712 trig_pos -104109 halt_pos -104112 +[2026-05-03 06:57:13.697] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 30.003469999950482 246.00152999994202 -0.0027051908340397224 spos -0.0019184255807545014 probing_z -0.2444184255807793 +[2026-05-03 06:57:13.698] [info] [gcode.cpp:559] [1885] probe at 30.003,246.002 is z=-0.002705 +[2026-05-03 06:57:13.698] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.34586520799985 +[2026-05-03 06:57:13.699] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 30.00346999995048 246.00152999994202 -0.00131133078290821 +[2026-05-03 06:57:13.699] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:57:13.700] [info] [probe.cpp:857] [1885] _move_next 112 probe_points.size 121 + +[2026-05-03 06:57:13.709] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.00295999995564 +[2026-05-03 06:57:13.709] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -192.0001000000379 +[2026-05-03 06:57:13.710] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744193405 +[2026-05-03 06:57:14.942] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:14.942] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:14.957] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1162996995 trigger_emit_ticks=1163381369 +[2026-05-03 06:57:14.970] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1162996995 trigger_emit_ticks=1163381369 +[2026-05-03 06:57:14.972] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1162996995 177256656131 trigger_emit_ticks 1163381369 177257040505 +[2026-05-03 06:57:14.973] [info] [homing.cpp:266] [1885] endstop_name probe tt 1478.5607554899689 trigger_time 1478.5607554899689 move_end_print_time 1478.8133860833334 +[2026-05-03 06:57:14.973] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1271 trig_steps -1269 start_pos -102811 trig_pos -104080 halt_pos -104082 +[2026-05-03 06:57:15.857] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.00142999995887 246.00152999999676 0.03931540403364278 spos 0.038081574419322806 probing_z -0.1719184255806594 +[2026-05-03 06:57:15.858] [info] [gcode.cpp:559] [1885] probe at 54.001,246.002 is z=0.039315 +[2026-05-03 06:57:15.858] [info] [load_cell_probe.cpp:333] [1885] run_probe time 2.1574236269998437 +[2026-05-03 06:57:15.860] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.00295999995564 +[2026-05-03 06:57:15.860] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -192.0001000000379 +[2026-05-03 06:57:15.860] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8230815744193284 +[2026-05-03 06:57:16.353] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:16.354] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:16.369] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1332223535 trigger_emit_ticks=1332607911 +[2026-05-03 06:57:16.372] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1332223535 177425882671 trigger_emit_ticks 1332607911 177426267047 +[2026-05-03 06:57:16.373] [info] [homing.cpp:266] [1885] endstop_name probe tt 1479.9709968618706 trigger_time 1479.9709968618706 move_end_print_time 1480.225095625 +[2026-05-03 06:57:16.373] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -415 trig_steps -412 start_pos -103682 trig_pos -104094 halt_pos -104097 +[2026-05-03 06:57:17.199] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.00142999995887 246.00152999999676 0.03396180833700649 spos 0.03308157441932735 probing_z -0.20691842558067164 +[2026-05-03 06:57:17.199] [info] [gcode.cpp:559] [1885] probe at 54.001,246.002 is z=0.033962 +[2026-05-03 06:57:17.201] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.341888833999974 +[2026-05-03 06:57:17.202] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 300.00295999995564 +[2026-05-03 06:57:17.202] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -192.0001000000379 +[2026-05-03 06:57:17.202] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7855815744193173 +[2026-05-03 06:57:17.689] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:17.690] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:17.705] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1493104867 +[2026-05-03 06:57:17.706] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 0 176093659136 trigger_emit_ticks 1493104867 177586764003 +[2026-05-03 06:57:17.707] [info] [homing.cpp:266] [1885] endstop_name probe tt 1481.3084923657098 trigger_time 1481.3084923657098 move_end_print_time 1481.5611105 +[2026-05-03 06:57:17.707] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -397 trig_steps -396 start_pos -103697 trig_pos -104093 halt_pos -104094 +[2026-05-03 06:57:18.550] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 54.00142999995887 246.00152999999676 0.030123846698094342 spos 0.030581574419329627 probing_z -0.20441842558068268 +[2026-05-03 06:57:18.551] [info] [gcode.cpp:559] [1885] probe at 54.001,246.002 is z=0.030124 +[2026-05-03 06:57:18.551] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3507883750000929 +[2026-05-03 06:57:18.552] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 54.00142999995887 246.00152999999673 0.034467019689581206 +[2026-05-03 06:57:18.552] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:57:18.553] [info] [probe.cpp:857] [1885] _move_next 113 probe_points.size 121 + +[2026-05-03 06:57:18.561] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.00092000001877 +[2026-05-03 06:57:18.561] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -168.00214000008424 +[2026-05-03 06:57:18.561] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574419437 +[2026-05-03 06:57:19.781] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:19.781] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:19.795] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1743570814 trigger_emit_ticks=1743955167 +[2026-05-03 06:57:19.797] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1743570814 177837229950 trigger_emit_ticks 1743955167 177837614303 +[2026-05-03 06:57:19.798] [info] [homing.cpp:266] [1885] endstop_name probe tt 1483.3989426477656 trigger_time 1483.3989426477656 move_end_print_time 1483.6542613887157 +[2026-05-03 06:57:19.799] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1247 trig_steps -1245 start_pos -102811 trig_pos -104056 halt_pos -104058 +[2026-05-03 06:57:20.529] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999996726 246.0015300000515 0.09127990942658262 spos 0.09058157441944559 probing_z -0.11191842558056342 +[2026-05-03 06:57:20.529] [info] [gcode.cpp:559] [1885] probe at 77.999,246.002 is z=0.091280 +[2026-05-03 06:57:20.530] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9765829590000976 +[2026-05-03 06:57:20.531] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.00092000001877 +[2026-05-03 06:57:20.531] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -168.00214000008424 +[2026-05-03 06:57:20.531] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8830815744194235 +[2026-05-03 06:57:21.024] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:21.024] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:21.039] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1892860419 trigger_emit_ticks=1893244795 +[2026-05-03 06:57:21.041] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1892860419 177986519555 trigger_emit_ticks 1893244795 177986903931 +[2026-05-03 06:57:21.043] [info] [homing.cpp:266] [1885] endstop_name probe tt 1484.6430407856724 trigger_time 1484.6430407856724 move_end_print_time 1484.8946555 +[2026-05-03 06:57:21.043] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -409 trig_steps -408 start_pos -103658 trig_pos -104066 halt_pos -104067 +[2026-05-03 06:57:21.872] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999996726 246.0015300000515 0.08857869010366196 spos 0.08808157441944786 probing_z -0.13691842558057654 +[2026-05-03 06:57:21.872] [info] [gcode.cpp:559] [1885] probe at 77.999,246.002 is z=0.088579 +[2026-05-03 06:57:21.873] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.343108791999839 +[2026-05-03 06:57:21.874] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 324.00092000001877 +[2026-05-03 06:57:21.875] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -168.00214000008424 +[2026-05-03 06:57:21.875] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8605815744194109 +[2026-05-03 06:57:22.363] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:22.363] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:22.385] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2053541517 trigger_emit_ticks=2053925893 +[2026-05-03 06:57:22.388] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2053541517 178147200653 trigger_emit_ticks 2053925893 178147585029 +[2026-05-03 06:57:22.389] [info] [homing.cpp:266] [1885] endstop_name probe tt 1485.9820678785636 trigger_time 1485.9820678785636 move_end_print_time 1486.2347059166666 +[2026-05-03 06:57:22.389] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -103667 trig_pos -104066 halt_pos -104067 +[2026-05-03 06:57:23.321] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 77.99938999996726 246.0015300000515 0.08793638865961775 spos 0.08808157441944786 probing_z -0.1369184255805892 +[2026-05-03 06:57:23.322] [info] [gcode.cpp:559] [1885] probe at 77.999,246.002 is z=0.087936 +[2026-05-03 06:57:23.323] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4496120840001367 +[2026-05-03 06:57:23.323] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 77.99938999996726 246.0015300000515 0.08926499606328746 +[2026-05-03 06:57:23.324] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:57:23.325] [info] [probe.cpp:857] [1885] _move_next 114 probe_points.size 121 + +[2026-05-03 06:57:23.333] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.9988800000819 +[2026-05-03 06:57:23.334] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -144.0041800001306 +[2026-05-03 06:57:23.334] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744195306 +[2026-05-03 06:57:24.551] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:24.551] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:24.567] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2315797248 trigger_emit_ticks=2316181601 +[2026-05-03 06:57:24.569] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2315797248 178409456384 trigger_emit_ticks 2316181601 178409840737 +[2026-05-03 06:57:24.570] [info] [homing.cpp:266] [1885] endstop_name probe tt 1488.1675622288415 trigger_time 1488.1675622288415 move_end_print_time 1488.422929056057 +[2026-05-03 06:57:24.570] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1251 trig_steps -1245 start_pos -102811 trig_pos -104056 halt_pos -104062 +[2026-05-03 06:57:25.306] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999997565 246.00153000010624 0.09012195659280312 spos 0.09058157441955927 probing_z -0.11191842558046972 +[2026-05-03 06:57:25.307] [info] [gcode.cpp:559] [1885] probe at 101.997,246.002 is z=0.090122 +[2026-05-03 06:57:25.307] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9819116680000661 +[2026-05-03 06:57:25.309] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.99888000008184 +[2026-05-03 06:57:25.309] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -144.00418000013056 +[2026-05-03 06:57:25.309] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8730815744195176 +[2026-05-03 06:57:25.801] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:25.816] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2466128527 trigger_emit_ticks=2466512901 +[2026-05-03 06:57:25.818] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2466128527 178559787663 trigger_emit_ticks 2466512901 178560172037 +[2026-05-03 06:57:25.819] [info] [homing.cpp:266] [1885] endstop_name probe tt 1489.4203408784058 trigger_time 1489.4203408784058 move_end_print_time 1489.67229525 +[2026-05-03 06:57:25.820] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -405 start_pos -103662 trig_pos -104067 halt_pos -104068 +[2026-05-03 06:57:26.662] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999997564 246.0015300001062 0.08671879527497053 spos 0.08558157441956382 probing_z -0.13941842558048234 +[2026-05-03 06:57:26.662] [info] [gcode.cpp:559] [1885] probe at 101.997,246.002 is z=0.086719 +[2026-05-03 06:57:26.663] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3552571259999695 +[2026-05-03 06:57:26.664] [info] [gcode_move.cpp:729] [1885] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 06:57:26.665] [info] [gcode_move.cpp:52] [1885] G180 select 915 +[2026-05-03 06:57:26.666] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.669] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.670] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.672] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.675] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.677] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.678] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.680] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.682] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.683] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.685] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.687] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.689] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.691] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.692] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.694] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.697] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.698] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.700] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.702] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.703] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.705] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.706] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.707] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.709] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.711] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.713] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.743] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.805] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.868] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.939] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:26.993] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:27.055] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:27.117] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:27.180] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:27.242] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:27.304] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:27.367] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:27.439] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:27.491] [info] [force_move.cpp:208] [1885] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 06:57:27.554] [info] [gcode_move.cpp:772] [1885] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 06:57:27.555] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 347.9988800000818 +[2026-05-03 06:57:27.555] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -144.00418000013053 +[2026-05-03 06:57:27.555] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 1.8580815744194836 +[2026-05-03 06:57:30.001] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:30.001] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:30.017] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2969936571 trigger_emit_ticks=2970320970 +[2026-05-03 06:57:30.018] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2969936571 179063595707 trigger_emit_ticks 2970320970 179063980106 +[2026-05-03 06:57:30.019] [info] [homing.cpp:266] [1885] endstop_name probe tt 1493.6187990668886 trigger_time 1493.6187990668886 move_end_print_time 1493.8724482083333 +[2026-05-03 06:57:30.019] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -790 trig_steps -786 start_pos -103268 trig_pos -104054 halt_pos -104058 +[2026-05-03 06:57:30.948] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 101.99734999997563 246.00153000010616 0.08897030802579067 spos 0.08808157441944786 probing_z -0.10691842558051645 +[2026-05-03 06:57:30.949] [info] [gcode.cpp:559] [1885] probe at 101.997,246.002 is z=0.088970 +[2026-05-03 06:57:30.949] [info] [load_cell_probe.cpp:333] [1885] run_probe time 3.395116752000149 +[2026-05-03 06:57:30.950] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 101.99734999997565 246.0015300001062 0.08860368663118812 +[2026-05-03 06:57:30.950] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:57:30.951] [info] [probe.cpp:857] [1885] _move_next 115 probe_points.size 121 + +[2026-05-03 06:57:30.960] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.9968400001449 +[2026-05-03 06:57:30.960] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015863 +[2026-05-03 06:57:30.960] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574419603 +[2026-05-03 06:57:32.176] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:32.177] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:32.192] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3231131305 trigger_emit_ticks=3231515681 +[2026-05-03 06:57:32.194] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3231131305 179324790441 trigger_emit_ticks 3231515681 179325174817 +[2026-05-03 06:57:32.195] [info] [homing.cpp:266] [1885] endstop_name probe tt 1495.795451575699 trigger_time 1495.795451575699 move_end_print_time 1496.048477346181 +[2026-05-03 06:57:32.195] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1250 trig_steps -1249 start_pos -102811 trig_pos -104060 halt_pos -104061 +[2026-05-03 06:57:32.925] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 125.99530999999314 246.00153000015177 0.07785887558155127 spos 0.07808157441962749 probing_z -0.12191842558039712 +[2026-05-03 06:57:32.926] [info] [gcode.cpp:559] [1885] probe at 125.995,246.002 is z=0.077859 +[2026-05-03 06:57:32.926] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9744415420000223 +[2026-05-03 06:57:32.928] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.9968400001449 +[2026-05-03 06:57:32.928] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015865 +[2026-05-03 06:57:32.928] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.87558157441959 +[2026-05-03 06:57:33.422] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:33.423] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:33.438] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3380594652 trigger_emit_ticks=3380979005 +[2026-05-03 06:57:33.440] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3380594652 179474253788 trigger_emit_ticks 3380979005 179474638141 +[2026-05-03 06:57:33.441] [info] [homing.cpp:266] [1885] endstop_name probe tt 1497.0409966586194 trigger_time 1497.0409966586194 move_end_print_time 1497.2941412916666 +[2026-05-03 06:57:33.441] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -409 trig_steps -408 start_pos -103661 trig_pos -104069 halt_pos -104070 +[2026-05-03 06:57:34.270] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 125.99530999999314 246.00153000015177 0.07560244794831875 spos 0.07558157441962976 probing_z -0.14441842558041007 +[2026-05-03 06:57:34.270] [info] [gcode.cpp:559] [1885] probe at 125.995,246.002 is z=0.075602 +[2026-05-03 06:57:34.271] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.344699209000055 +[2026-05-03 06:57:34.273] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 371.9968400001449 +[2026-05-03 06:57:34.273] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -120.00622000015865 +[2026-05-03 06:57:34.273] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8530815744195774 +[2026-05-03 06:57:34.764] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:34.765] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:34.780] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3541557037 trigger_emit_ticks=3541941411 +[2026-05-03 06:57:34.782] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3541557037 179635216173 trigger_emit_ticks 3541941411 179635600547 +[2026-05-03 06:57:34.784] [info] [homing.cpp:266] [1885] endstop_name probe tt 1498.3823687056715 trigger_time 1498.3823687056715 move_end_print_time 1498.6350457916667 +[2026-05-03 06:57:34.784] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -405 trig_steps -403 start_pos -103670 trig_pos -104073 halt_pos -104075 +[2026-05-03 06:57:35.612] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 125.99530999999314 246.00153000015177 0.07206317121817166 spos 0.07308157441957519 probing_z -0.15441842558042262 +[2026-05-03 06:57:35.613] [info] [gcode.cpp:559] [1885] probe at 125.995,246.002 is z=0.072063 +[2026-05-03 06:57:35.614] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3422303759998613 +[2026-05-03 06:57:35.614] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 125.99530999999314 246.00153000015177 0.07517483158268055 +[2026-05-03 06:57:35.614] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:57:35.615] [info] [probe.cpp:857] [1885] _move_next 116 probe_points.size 121 + +[2026-05-03 06:57:35.623] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 395.99480000020804 +[2026-05-03 06:57:35.623] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015025 +[2026-05-03 06:57:35.623] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574419697 +[2026-05-03 06:57:35.631] [error] [tmc_uart.cpp:319] [1885] _decode_read error #1 +[2026-05-03 06:57:36.842] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:36.843] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:36.856] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3790569531 trigger_emit_ticks=3790953905 +[2026-05-03 06:57:36.858] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3790569531 179884228667 trigger_emit_ticks 3790953905 179884613041 +[2026-05-03 06:57:36.859] [info] [homing.cpp:266] [1885] endstop_name probe tt 1500.457500453432 trigger_time 1500.457500453432 move_end_print_time 1500.7142300915614 +[2026-05-03 06:57:36.862] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1250 trig_steps -1242 start_pos -102811 trig_pos -104053 halt_pos -104061 +[2026-05-03 06:57:37.604] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9995000000289 245.99530000017916 0.0799829403573167 spos 0.0805815744197389 probing_z -0.1044184255803029 +[2026-05-03 06:57:37.604] [info] [gcode.cpp:559] [1885] probe at 150.000,245.995 is z=0.079983 +[2026-05-03 06:57:37.605] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9894626259999768 +[2026-05-03 06:57:37.606] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 395.99480000020804 +[2026-05-03 06:57:37.606] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015027 +[2026-05-03 06:57:37.606] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8755815744196841 +[2026-05-03 06:57:38.098] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:38.099] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:38.120] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3941769707 trigger_emit_ticks=3942144707 +[2026-05-03 06:57:38.122] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 3941769707 180035428843 trigger_emit_ticks 3942144707 180035803843 +[2026-05-03 06:57:38.123] [info] [homing.cpp:266] [1885] endstop_name probe tt 1501.717439873041 trigger_time 1501.717439873041 move_end_print_time 1501.9702751666666 +[2026-05-03 06:57:38.123] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -406 trig_steps -405 start_pos -103661 trig_pos -104066 halt_pos -104067 +[2026-05-03 06:57:39.055] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9995000000289 245.99530000017916 0.07727100683853641 spos 0.07808157441974117 probing_z -0.13691842558031586 +[2026-05-03 06:57:39.056] [info] [gcode.cpp:559] [1885] probe at 150.000,245.995 is z=0.077271 +[2026-05-03 06:57:39.057] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4516639589999158 +[2026-05-03 06:57:39.058] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 395.99480000020804 +[2026-05-03 06:57:39.058] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -95.99580000015027 +[2026-05-03 06:57:39.058] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8605815744196713 +[2026-05-03 06:57:39.549] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:39.549] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:39.563] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4115669993 trigger_emit_ticks=4116054367 +[2026-05-03 06:57:39.565] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 4115669993 180209329129 trigger_emit_ticks 4116054367 180209713503 +[2026-05-03 06:57:39.566] [info] [homing.cpp:266] [1885] endstop_name probe tt 1503.166704440507 trigger_time 1503.166704440507 move_end_print_time 1503.4198493333333 +[2026-05-03 06:57:39.567] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -403 trig_steps -399 start_pos -103667 trig_pos -104066 halt_pos -104070 +[2026-05-03 06:57:40.506] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 149.9995000000289 245.99530000017916 0.07657085670561684 spos 0.0755815744196866 probing_z -0.13691842558032874 +[2026-05-03 06:57:40.507] [info] [gcode.cpp:559] [1885] probe at 150.000,245.995 is z=0.076571 +[2026-05-03 06:57:40.507] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4501493339998888 +[2026-05-03 06:57:40.508] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 149.9995000000289 245.99530000017913 0.07794160130048998 +[2026-05-03 06:57:40.508] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:57:40.509] [info] [probe.cpp:857] [1885] _move_next 117 probe_points.size 121 + +[2026-05-03 06:57:40.517] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 420.0052200002712 +[2026-05-03 06:57:40.517] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014188 +[2026-05-03 06:57:40.517] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574419791 +[2026-05-03 06:57:41.736] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:41.736] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:41.757] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=83152475 trigger_emit_ticks=83536849 +[2026-05-03 06:57:41.758] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 83152475 180471778907 trigger_emit_ticks 83536849 180472163281 +[2026-05-03 06:57:41.761] [info] [homing.cpp:266] [1885] endstop_name probe tt 1505.3538145510413 trigger_time 1505.3538145510413 move_end_print_time 1505.6093624166667 +[2026-05-03 06:57:41.761] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1251 trig_steps -1248 start_pos -102811 trig_pos -104059 halt_pos -104062 +[2026-05-03 06:57:42.490] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 174.00369000006467 246.00153000020654 0.05808625074723486 spos 0.058081574419816207 probing_z -0.11941842558020932 +[2026-05-03 06:57:42.491] [info] [gcode.cpp:559] [1885] probe at 174.004,246.002 is z=0.058086 +[2026-05-03 06:57:42.492] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9829739589999917 +[2026-05-03 06:57:42.493] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 420.00522000027115 +[2026-05-03 06:57:42.494] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014188 +[2026-05-03 06:57:42.494] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8730815744197779 +[2026-05-03 06:57:42.999] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:43.000] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:43.024] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=234830697 trigger_emit_ticks=235215071 +[2026-05-03 06:57:43.025] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 234830697 180623457129 trigger_emit_ticks 235215071 180623841503 +[2026-05-03 06:57:43.026] [info] [homing.cpp:266] [1885] endstop_name probe tt 1506.6178171647261 trigger_time 1506.6178171647261 move_end_print_time 1506.879351625 +[2026-05-03 06:57:43.027] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -408 trig_steps -406 start_pos -103662 trig_pos -104068 halt_pos -104070 +[2026-05-03 06:57:43.959] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 174.00369000006464 246.00153000020651 0.056834671151102883 spos 0.05808157441975936 probing_z -0.14191842558022227 +[2026-05-03 06:57:43.960] [info] [gcode.cpp:559] [1885] probe at 174.004,246.002 is z=0.056835 +[2026-05-03 06:57:43.961] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.468548626000029 +[2026-05-03 06:57:43.962] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 420.00522000027115 +[2026-05-03 06:57:43.962] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -71.99784000014188 +[2026-05-03 06:57:43.962] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8530815744197653 +[2026-05-03 06:57:44.450] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:44.451] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:44.465] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=409033841 trigger_emit_ticks=409418215 +[2026-05-03 06:57:44.466] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 409033841 180797660273 trigger_emit_ticks 409418215 180798044647 +[2026-05-03 06:57:44.468] [info] [homing.cpp:266] [1885] endstop_name probe tt 1508.0695307518954 trigger_time 1508.0695307518954 move_end_print_time 1508.32204 +[2026-05-03 06:57:44.468] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -103670 trig_pos -104069 halt_pos -104070 +[2026-05-03 06:57:45.300] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 174.00369000006464 246.00153000020651 0.05442157497368408 spos 0.05558157441976164 probing_z -0.14441842558023477 +[2026-05-03 06:57:45.301] [info] [gcode.cpp:559] [1885] probe at 174.004,246.002 is z=0.054422 +[2026-05-03 06:57:45.303] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.341332083999987 +[2026-05-03 06:57:45.303] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 174.00369000006467 246.00153000020654 0.05644749895734061 +[2026-05-03 06:57:45.303] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:57:45.304] [info] [probe.cpp:857] [1885] _move_next 118 probe_points.size 121 + +[2026-05-03 06:57:45.312] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 444.0031800003343 +[2026-05-03 06:57:45.313] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.99988000013349 +[2026-05-03 06:57:45.313] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.000581574419885 +[2026-05-03 06:57:46.534] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:46.535] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:46.549] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=659134469 trigger_emit_ticks=659518843 +[2026-05-03 06:57:46.551] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 659134469 181047760901 trigger_emit_ticks 659518843 181048145275 +[2026-05-03 06:57:46.552] [info] [homing.cpp:266] [1885] endstop_name probe tt 1510.153732977031 trigger_time 1510.153732977031 move_end_print_time 1510.405265875 +[2026-05-03 06:57:46.553] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1259 trig_steps -1258 start_pos -102811 trig_pos -104069 halt_pos -104070 +[2026-05-03 06:57:47.284] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.0016500001004 246.00153000023388 0.030378687021384937 spos 0.03058157441989806 probing_z -0.14441842558011508 +[2026-05-03 06:57:47.285] [info] [gcode.cpp:559] [1885] probe at 198.002,246.002 is z=0.030379 +[2026-05-03 06:57:47.286] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.980997792999915 +[2026-05-03 06:57:47.287] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 444.0031800003343 +[2026-05-03 06:57:47.287] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.999880000133516 +[2026-05-03 06:57:47.287] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8530815744198724 +[2026-05-03 06:57:47.782] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:47.783] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:47.800] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=808715532 trigger_emit_ticks=809099885 +[2026-05-03 06:57:47.803] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 808715532 181197341964 trigger_emit_ticks 809099885 181197726317 +[2026-05-03 06:57:47.804] [info] [homing.cpp:266] [1885] endstop_name probe tt 1511.4002591716378 trigger_time 1511.4002591716378 move_end_print_time 1511.6541697083333 +[2026-05-03 06:57:47.805] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -413 trig_steps -411 start_pos -103670 trig_pos -104081 halt_pos -104083 +[2026-05-03 06:57:48.740] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.00165000010037 246.0015300002339 0.023982214577787847 spos 0.02308157441984804 probing_z -0.17441842558012766 +[2026-05-03 06:57:48.741] [info] [gcode.cpp:559] [1885] probe at 198.002,246.002 is z=0.023982 +[2026-05-03 06:57:48.742] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.4561093339998479 +[2026-05-03 06:57:48.743] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 444.0031800003343 +[2026-05-03 06:57:48.743] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -47.999880000133544 +[2026-05-03 06:57:48.743] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8205815744198607 +[2026-05-03 06:57:49.237] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:49.237] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:49.251] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=983311895 trigger_emit_ticks=983696271 +[2026-05-03 06:57:49.253] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 983311895 181371938327 trigger_emit_ticks 983696271 181372322703 +[2026-05-03 06:57:49.253] [info] [homing.cpp:266] [1885] endstop_name probe tt 1512.8552498947383 trigger_time 1512.8552498947383 move_end_print_time 1513.107558875 +[2026-05-03 06:57:49.254] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -404 trig_steps -402 start_pos -103683 trig_pos -104085 halt_pos -104087 +[2026-05-03 06:57:50.088] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 198.00165000010037 246.0015300002339 0.02620077778449184 spos 0.02558157441990261 probing_z -0.18441842558013943 +[2026-05-03 06:57:50.088] [info] [gcode.cpp:559] [1885] probe at 198.002,246.002 is z=0.026201 +[2026-05-03 06:57:50.089] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3470245420000992 +[2026-05-03 06:57:50.089] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 198.00165000010034 246.00153000023388 0.026853893127888207 +[2026-05-03 06:57:50.090] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:57:50.090] [info] [probe.cpp:857] [1885] _move_next 119 probe_points.size 121 + +[2026-05-03 06:57:50.098] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 468.0011400003974 +[2026-05-03 06:57:50.099] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129715 +[2026-05-03 06:57:50.099] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744199804 +[2026-05-03 06:57:51.327] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:51.327] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:51.343] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1234081663 trigger_emit_ticks=1234466037 +[2026-05-03 06:57:51.345] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1234081663 181622708095 trigger_emit_ticks 1234466037 181623092469 +[2026-05-03 06:57:51.346] [info] [homing.cpp:266] [1885] endstop_name probe tt 1514.9450291235141 trigger_time 1514.9450291235141 move_end_print_time 1515.1981855416666 +[2026-05-03 06:57:51.347] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1267 trig_steps -1263 start_pos -102811 trig_pos -104074 halt_pos -104078 +[2026-05-03 06:57:52.087] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99961000013386 246.00153000026356 0.021436695983234638 spos 0.020581574419964 probing_z -0.15691842558001978 +[2026-05-03 06:57:52.087] [info] [gcode.cpp:559] [1885] probe at 222.000,246.002 is z=0.021437 +[2026-05-03 06:57:52.088] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.9969788339999468 +[2026-05-03 06:57:52.089] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 468.0011400003974 +[2026-05-03 06:57:52.089] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129672 +[2026-05-03 06:57:52.090] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8330815744199683 +[2026-05-03 06:57:52.582] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:52.596] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1384806351 trigger_emit_ticks=1385190725 +[2026-05-03 06:57:52.598] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1384806351 181773432783 trigger_emit_ticks 1385190725 181773817157 +[2026-05-03 06:57:52.599] [info] [homing.cpp:266] [1885] endstop_name probe tt 1516.201085401453 trigger_time 1516.201085401453 move_end_print_time 1516.4531102916667 +[2026-05-03 06:57:52.599] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -409 trig_steps -408 start_pos -103678 trig_pos -104086 halt_pos -104087 +[2026-05-03 06:57:53.442] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99961000013388 246.00153000026353 0.02257115823448866 spos 0.02308157442001857 probing_z -0.1869184255800317 +[2026-05-03 06:57:53.443] [info] [gcode.cpp:559] [1885] probe at 222.000,246.002 is z=0.022571 +[2026-05-03 06:57:53.444] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.355525833999991 +[2026-05-03 06:57:53.445] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 468.0011400003974 +[2026-05-03 06:57:53.445] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -24.001920000129644 +[2026-05-03 06:57:53.445] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8105815744199568 +[2026-05-03 06:57:53.934] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:53.935] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:53.953] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1547021715 trigger_emit_ticks=1547406091 +[2026-05-03 06:57:53.955] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1547021715 181935648147 trigger_emit_ticks 1547406091 181936032523 +[2026-05-03 06:57:53.957] [info] [homing.cpp:266] [1885] endstop_name probe tt 1517.5528992770858 trigger_time 1517.5528992770858 move_end_print_time 1517.805817 +[2026-05-03 06:57:53.957] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -401 trig_steps -399 start_pos -103687 trig_pos -104086 halt_pos -104088 +[2026-05-03 06:57:54.794] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 221.99961000013388 246.00153000026353 0.023479988238923083 spos 0.023081574419961726 probing_z -0.18691842558004323 +[2026-05-03 06:57:54.796] [info] [gcode.cpp:559] [1885] probe at 222.000,246.002 is z=0.023480 +[2026-05-03 06:57:54.796] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.352502749999985 +[2026-05-03 06:57:54.797] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 221.99961000013388 246.00153000026353 0.022495947485548794 +[2026-05-03 06:57:54.797] [info] [device_status.cpp:349] [1885] Bed Mesh State: running +[2026-05-03 06:57:54.798] [info] [probe.cpp:857] [1885] _move_next 120 probe_points.size 121 + +[2026-05-03 06:57:54.806] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 491.99910000046054 +[2026-05-03 06:57:54.806] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130657725 +[2026-05-03 06:57:54.806] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 3.0005815744200763 +[2026-05-03 06:57:56.040] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:56.041] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:56.057] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1799771985 trigger_emit_ticks=1800156359 +[2026-05-03 06:57:56.059] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1799771985 182188398417 trigger_emit_ticks 1800156359 182188782791 +[2026-05-03 06:57:56.060] [info] [homing.cpp:266] [1885] endstop_name probe tt 1519.6591820350372 trigger_time 1519.6591820350372 move_end_print_time 1519.91171525 +[2026-05-03 06:57:56.060] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -1277 trig_steps -1276 start_pos -102811 trig_pos -104087 halt_pos -104088 +[2026-05-03 06:57:56.796] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.99757000016496 246.0015300002956 0.006612456642297843 spos 0.005581574420148172 probing_z -0.1894184255799236 +[2026-05-03 06:57:56.797] [info] [gcode.cpp:559] [1885] probe at 245.998,246.002 is z=0.006612 +[2026-05-03 06:57:56.798] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.999163542999895 +[2026-05-03 06:57:56.799] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 491.99910000046054 +[2026-05-03 06:57:56.799] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130632579 +[2026-05-03 06:57:56.799] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.8080815744200649 +[2026-05-03 06:57:57.296] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:57.296] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:57.311] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1950390151 trigger_emit_ticks=1950774525 +[2026-05-03 06:57:57.313] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 1950390151 182339016583 trigger_emit_ticks 1950774525 182339400957 +[2026-05-03 06:57:57.314] [info] [homing.cpp:266] [1885] endstop_name probe tt 1520.9143513600864 trigger_time 1520.9143513600864 move_end_print_time 1521.16712175 +[2026-05-03 06:57:57.315] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -414 trig_steps -412 start_pos -103688 trig_pos -104100 halt_pos -104102 +[2026-05-03 06:57:58.147] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.99757000016496 246.0015300002956 0.0028273235495348825 spos 0.0030815744200936024 probing_z -0.22191842557993513 +[2026-05-03 06:57:58.147] [info] [gcode.cpp:559] [1885] probe at 245.998,246.002 is z=0.002827 +[2026-05-03 06:57:58.148] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.350473834000013 +[2026-05-03 06:57:58.150] [info] [homing.cpp:152] [1885] kin_spos name stepper_x command_position 491.99910000046054 +[2026-05-03 06:57:58.150] [info] [homing.cpp:152] [1885] kin_spos name stepper_y command_position -0.003960000130632579 +[2026-05-03 06:57:58.150] [info] [homing.cpp:152] [1885] kin_spos name stepper_z command_position 0.7730815744200542 +[2026-05-03 06:57:58.634] [info] [mcu.cpp:390] [1961] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 06:57:58.634] [info] [mcu.cpp:390] [1955] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 06:57:58.651] [info] [serialhdl.cpp:502] [1961] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2111067199 trigger_emit_ticks=2111451575 +[2026-05-03 06:57:58.653] [info] [load_cell_probe.cpp:1049] [1885] trigger_ticks 2111067199 182499693631 trigger_emit_ticks 2111451575 182500078007 +[2026-05-03 06:57:58.654] [info] [homing.cpp:266] [1885] endstop_name probe tt 1522.2533449026 trigger_time 1522.2533449026 move_end_print_time 1522.5054692083334 +[2026-05-03 06:57:58.654] [info] [homing.cpp:281] [1885] stepper_name stepper_z halt_steps -398 trig_steps -397 start_pos -103702 trig_pos -104099 halt_pos -104100 +[2026-05-03 06:57:59.483] [info] [load_cell_probe.cpp:617] [1885] ppa: valid true epos 245.99757000016496 246.0015300002956 0.0045301781006552855 spos 0.005581574420091329 probing_z -0.21941842557994584 +[2026-05-03 06:57:59.484] [info] [gcode.cpp:559] [1885] probe at 245.998,246.002 is z=0.004530 +[2026-05-03 06:57:59.486] [info] [load_cell_probe.cpp:333] [1885] run_probe time 1.3375606670001616 +[2026-05-03 06:57:59.486] [info] [load_cell_probe.cpp:338] [1885] run_probe epos 245.99757000016496 246.0015300002956 0.0046566527641626705 +[2026-05-03 06:57:59.500] [info] [print_stats.cpp:277] [1885] bed_mesh_exist:0x0000 +[2026-05-03 06:57:59.501] [info] [gcode.cpp:559] [1885] Mesh Bed Leveling Complete +[2026-05-03 06:57:59.503] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh default] version 1 +[2026-05-03 06:57:59.503] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh default] points 0.119271, 0.200814, 0.251555, 0.277941, 0.278441, 0.292246, 0.329119, 0.315549, 0.325415, 0.320233, 0.286517, 0.096921, 0.138892, 0.148576, 0.156629, 0.155172, 0.163216, 0.164338, 0.172061, 0.149480, 0.166777, 0.135228, 0.052326, 0.065967, 0.064623, 0.060515, 0.034253, 0.048653, 0.026016, 0.024934, 0.024019, 0.032422, 0.004996, 0.011622, 0.027409, 0.023334, 0.006539, -0.039987, -0.044750, -0.068201, -0.051720, -0.063422, -0.053687, -0.078149, 0.000994, 0.020231, -0.000609, -0.019302, -0.028703, -0.068160, -0.081192, -0.072268, -0.091301, -0.089230, -0.094628, -0.024258, -0.011464, -0.022840, -0.047253, -0.076235, -0.072752, -0.118636, -0.124653, -0.136672, -0.117151, -0.104623, -0.050615, -0.033980, -0.031836, -0.055634, -0.061042, -0.075904, -0.074936, -0.090715, -0.088500, -0.082598, -0.091775, -0.043566, -0.040123, -0.034116, -0.048984, -0.061287, -0.054913, -0.065851, -0.069991, -0.082802, -0.075361, -0.079114, -0.067968, -0.022349, -0.038089, -0.026602, -0.015828, -0.038621, -0.034388, -0.045234, -0.040354, -0.045911, -0.060658, -0.063994, -0.019744, 0.036586, 0.017822, 0.026832, 0.026485, 0.008454, 0.009319, 0.004012, -0.008592, -0.031552, -0.041609, -0.001311, 0.034467, 0.089265, 0.088604, 0.075175, 0.077942, 0.056447, 0.026854, 0.022496, 0.004657 +[2026-05-03 06:57:59.503] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh default] offset 0.000000 +[2026-05-03 06:57:59.504] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh default] algo bicubic +[2026-05-03 06:57:59.504] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh default] max_x 246.000000 +[2026-05-03 06:57:59.504] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh default] max_y 246.000000 +[2026-05-03 06:57:59.504] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh default] mesh_x_pps 3 +[2026-05-03 06:57:59.504] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh default] mesh_y_pps 3 +[2026-05-03 06:57:59.504] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh default] min_x 6.000000 +[2026-05-03 06:57:59.504] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh default] min_y 6.000000 +[2026-05-03 06:57:59.504] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh default] tension 0.200000 +[2026-05-03 06:57:59.505] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh default] x_count 11 +[2026-05-03 06:57:59.505] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh default] y_count 11 +[2026-05-03 06:57:59.513] [info] [bed_mesh.cpp:463] [1885] update_status bed_mesh_exist:0x0100 +[2026-05-03 06:57:59.513] [info] [print_stats.cpp:277] [1885] bed_mesh_exist:0x0100 +[2026-05-03 06:57:59.514] [info] [bed_mesh.cpp:2832] [1885] ProfileManager::save_profile time 0.012344750000011118 +[2026-05-03 06:58:00.037] [info] [configfile.cpp:723] [1885] CFG /opt/usr/cfg/autosave.cfg BACKUP /opt/usr/cfg/autosave_backup.cfg TEMP /opt/usr/cfg/autosave_temp.cfg +[2026-05-03 06:58:00.041] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh ADAPTIVE] version 1 +[2026-05-03 06:58:00.041] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh ADAPTIVE] points 0.119271, 0.200814, 0.251555, 0.277941, 0.278441, 0.292246, 0.329119, 0.315549, 0.325415, 0.320233, 0.286517, 0.096921, 0.138892, 0.148576, 0.156629, 0.155172, 0.163216, 0.164338, 0.172061, 0.149480, 0.166777, 0.135228, 0.052326, 0.065967, 0.064623, 0.060515, 0.034253, 0.048653, 0.026016, 0.024934, 0.024019, 0.032422, 0.004996, 0.011622, 0.027409, 0.023334, 0.006539, -0.039987, -0.044750, -0.068201, -0.051720, -0.063422, -0.053687, -0.078149, 0.000994, 0.020231, -0.000609, -0.019302, -0.028703, -0.068160, -0.081192, -0.072268, -0.091301, -0.089230, -0.094628, -0.024258, -0.011464, -0.022840, -0.047253, -0.076235, -0.072752, -0.118636, -0.124653, -0.136672, -0.117151, -0.104623, -0.050615, -0.033980, -0.031836, -0.055634, -0.061042, -0.075904, -0.074936, -0.090715, -0.088500, -0.082598, -0.091775, -0.043566, -0.040123, -0.034116, -0.048984, -0.061287, -0.054913, -0.065851, -0.069991, -0.082802, -0.075361, -0.079114, -0.067968, -0.022349, -0.038089, -0.026602, -0.015828, -0.038621, -0.034388, -0.045234, -0.040354, -0.045911, -0.060658, -0.063994, -0.019744, 0.036586, 0.017822, 0.026832, 0.026485, 0.008454, 0.009319, 0.004012, -0.008592, -0.031552, -0.041609, -0.001311, 0.034467, 0.089265, 0.088604, 0.075175, 0.077942, 0.056447, 0.026854, 0.022496, 0.004657 +[2026-05-03 06:58:00.041] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh ADAPTIVE] offset 0.000000 +[2026-05-03 06:58:00.042] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh ADAPTIVE] algo bicubic +[2026-05-03 06:58:00.042] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh ADAPTIVE] max_x 246.000000 +[2026-05-03 06:58:00.042] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh ADAPTIVE] max_y 246.000000 +[2026-05-03 06:58:00.042] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh ADAPTIVE] mesh_x_pps 3 +[2026-05-03 06:58:00.042] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh ADAPTIVE] mesh_y_pps 3 +[2026-05-03 06:58:00.042] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh ADAPTIVE] min_x 6.000000 +[2026-05-03 06:58:00.042] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh ADAPTIVE] min_y 6.000000 +[2026-05-03 06:58:00.042] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh ADAPTIVE] tension 0.200000 +[2026-05-03 06:58:00.042] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh ADAPTIVE] x_count 11 +[2026-05-03 06:58:00.043] [info] [configfile.cpp:659] [1885] save_config: set [bed_mesh ADAPTIVE] y_count 11 +[2026-05-03 06:58:00.051] [info] [bed_mesh.cpp:463] [1885] update_status bed_mesh_exist:0x0100 +[2026-05-03 06:58:00.051] [info] [print_stats.cpp:277] [1885] bed_mesh_exist:0x0100 +[2026-05-03 06:58:00.052] [info] [bed_mesh.cpp:2832] [1885] ProfileManager::save_profile time 0.012911708000046929 +[2026-05-03 06:58:00.066] [info] [configfile.cpp:723] [1885] CFG /opt/usr/cfg/autosave.cfg BACKUP /opt/usr/cfg/autosave_backup.cfg TEMP /opt/usr/cfg/autosave_temp.cfg +[2026-05-03 06:58:00.070] [info] [gcode_move.cpp:52] [1885] G180 select 6 +[2026-05-03 06:58:00.075] [info] [extruder.cpp:501] [1885] cmd_M104 temp 0 index -1 wait false +[2026-05-03 06:58:00.076] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:0,wait:false +[2026-05-03 06:58:00.076] [info] [heater_bed.cpp:57] [1885] cmd_M140 temp 0 wait false +[2026-05-03 06:58:00.076] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:0,wait:false +[2026-05-03 06:58:08.172] [info] [heater_bed.cpp:57] [1885] cmd_M140 temp 0 wait false +[2026-05-03 06:58:08.172] [info] [heaters.cpp:1066] [1885] __func__:set_temperature,temp:0,wait:false +[2026-05-03 06:58:08.172] [info] [device_status.cpp:349] [1885] Bed Mesh State: completed +[2026-05-03 06:58:08.173] [info] [gcode.cpp:544] [1885] respond_ecode: , error_code: 704 error_level 3 +[2026-05-03 06:58:08.173] [info] [device_status.cpp:832] [1885] M2202 result_code:2902 +[2026-05-03 06:58:08.176] [info] [webhooks.cpp:170] [1885] return total: {"id":51,"result":{}} +[2026-05-03 06:58:09.941] [info] [device_ui_message_handle.cpp:170] [1885] Handling device manage request {"bed_mesh_calibrate":2092,"pid_calibrate":1055,"resonance_tester":5935,"script":"onekey_self_check","status":"end"} +[2026-05-03 06:58:09.944] [info] [device_ui_message_handle.cpp:219] [1885] Report self check result success {"auto_check_record":[{"exception_code":[],"status":true,"time":1777762689}],"id":1777762689943} +[2026-05-03 06:58:09.946] [info] [webhooks.cpp:768] [1885] return handle_device_manage: null +[2026-05-03 06:58:09.947] [info] [webhooks.cpp:170] [1885] return total: {"id":52,"result":{}} +[2026-05-03 06:58:42.158] [info] [heaters.cpp:405] [1955] __func__:temperature_callback,heater_name:heater_bed,read_time:1565.77800000038,last_temp:58.64811304885819,temp:58.64811304885819,target_temp:0,smoothed_temp:58.66879555888953 +[2026-05-03 06:58:42.820] [info] [heaters.cpp:405] [1963] __func__:temperature_callback,heater_name:extruder,read_time:1566.436782636535,last_temp:119.40583988849068,temp:119.40583988849068,target_temp:0,smoothed_temp:119.59968743753693 +[2026-05-03 07:00:19.862] [warning] [por.cpp:211] [1885] trig_shutdonw! +[2026-05-03 07:00:19.864] [info] [serialhdl.cpp:502] [1955] mcu 'mcu': got handle_output name: #output message: command_shutdown_pins_set: shutdown shutdown_pins +[2026-05-03 07:00:19.865] [info] [serialhdl.cpp:502] [1955] mcu 'mcu': got handle_output name: #output message: analog_in_shutdown oid 27 ev1 0 ev2 0 st 9 sc 8 +[2026-05-03 07:00:19.865] [info] [serialhdl.cpp:502] [1955] mcu 'mcu': got handle_output name: #output message: analog_in_shutdown oid 34 ev1 0 ev2 0 st 9 sc 8 +[2026-05-03 07:00:19.865] [warning] [serialhdl.cpp:553] [1955] response->len:12,params['clock']:1268884348,params['static_string_id']:19 mcu mcu 'mcu': shutdown! +[2026-05-03 07:00:19.866] [error] [mcu.cpp:1488] [1955] mcu mcu clock32 1268884348 clock64 39923590012 shutdown id 19 msg shutdown_pins +[2026-05-03 07:00:19.894] [info] [virtual_sdcard.cpp:356] [1885] start saving supplement info. +[2026-05-03 07:00:19.924] [info] [config_manager.cpp:338] [1885] save supplement info success +[2026-05-03 07:00:19.925] [info] [config_manager.cpp:474] [1885] save persistent supplement info success +[2026-05-03 07:00:19.926] [info] [virtual_sdcard.cpp:359] [1885] start saving print process data. +[2026-05-03 07:00:19.966] [info] [virtual_sdcard.cpp:397] [1885] handle_power_outage No data needs to be saved before the actual printing. +[2026-05-03 07:00:19.967] [warning] [por.cpp:225] [1885] por:power_off handle done +[2026-05-03 07:04:20.023] [info] [logger.cpp:80] [1969] elegoo log init finish! +[2026-05-03 07:04:20.081] [info] [main.cpp:209] [1969] inputtty:./config/printer,gcode_fd:5 +[2026-05-03 07:04:20.240] [info] [main.cpp:226] [1969] Starting Elegoo... +[2026-05-03 07:04:20.240] [info] [main.cpp:228] [1969] start_args.size:17,sizeof(long_options):9 +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[img_version]:00.00.00.00 +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[gui_version]:01.01.11.03 +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[elegoo_version]:12.26.19.32 +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[camera_version]:00.00.00.00 +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[canvas_version]:00.00.00.00 +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[ota_version]:01.03.01.89 +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[bed_sensor_version]:00.00.00.00 +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[start_reason]:startup +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[apiserver]:/tmp/elegoo_uds +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[toolhead_gd32_version]:00.00.00.00 +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[autosave_file]:/opt/usr/cfg/autosave.cfg +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[gcode_fd]:5 +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[config_file]:/opt/inst/printer_dsp.cfg +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[cpu_info]:2 core ARMv7 Processor rev 5 (v7l) +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[mcu_gd32_version]:00.00.00.00 +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[machine_model]:Centauri Carbon 2 +[2026-05-03 07:04:20.241] [info] [main.cpp:231] [1969] start_args[os_version]:01.02.12.01 +[2026-05-03 07:04:20.241] [info] [main.cpp:236] [1969] long_options[debuginput]:i +[2026-05-03 07:04:20.241] [info] [main.cpp:236] [1969] long_options[input-tty]:I +[2026-05-03 07:04:20.241] [info] [main.cpp:236] [1969] long_options[api-server]:a +[2026-05-03 07:04:20.241] [info] [main.cpp:236] [1969] long_options[logfile]:l +[2026-05-03 07:04:20.241] [info] [main.cpp:236] [1969] long_options[verbose]:v +[2026-05-03 07:04:20.241] [info] [main.cpp:236] [1969] long_options[debugoutput]:o +[2026-05-03 07:04:20.241] [info] [main.cpp:236] [1969] long_options[dictionary]:d +[2026-05-03 07:04:20.241] [info] [main.cpp:236] [1969] long_options[import-test]:t +[2026-05-03 07:04:20.241] [info] [printer.cpp:50] [1969] create Printer success! +[2026-05-03 07:04:20.242] [info] [printer.cpp:365] [1969] connect begin! +[2026-05-03 07:04:20.242] [info] [printer.cpp:284] [1969] read_config begin! +[2026-05-03 07:04:20.280] [info] [webhooks.cpp:595] [1969] create WebHooks success! +[2026-05-03 07:04:20.280] [info] [webhooks.cpp:384] [1969] create ServerSocket success! /tmp/elegoo_uds +[2026-05-03 07:04:20.280] [info] [webhooks.cpp:443] [1969] create ServerSocket success! +[2026-05-03 07:04:20.590] [info] [config_manager.cpp:162] [1969] begin read sn info +[2026-05-03 07:04:20.591] [info] [config_manager.cpp:196] [1969] read product auth success +[2026-05-03 07:04:20.592] [info] [config_manager.cpp:144] [1969] machine: {"machine":{"model":"Centauri Carbon 2"},"versions":[{"os_version":"01.02.12.01"},{"mcu_gd32_version":"00.00.00.00"},{"toolhead_gd32_version":"00.00.00.00"},{"bed_sensor_version":"00.00.00.00"},{"canvas_version":"00.00.00.00"},{"camera_version":"00.00.00.00"},{"elegoo_version":"12.26.19.32"},{"gui_version":"01.01.11.03"},{"ota_version":"01.03.01.89"},{"img_version":"00.00.00.00"}]} +[2026-05-03 07:04:20.592] [info] [config_manager.cpp:150] [1969] parse machine model from sn: Centauri Carbon 2 +[2026-05-03 07:04:20.592] [info] [config_manager.cpp:200] [1969] begin read supplement info +[2026-05-03 07:04:20.649] [info] [config_manager.cpp:283] [1969] token info: token: miM2yt, token_switch_enabled: true, is_lan_mode: false, power_outage_resume_enabled: true, region: 1 +[2026-05-03 07:04:20.651] [info] [config_manager.cpp:441] [1969] load persistent supplement info success +[2026-05-03 07:04:20.705] [info] [device_status.cpp:132] [1969] Create component manager for Centauri Carbon 2 +[2026-05-03 07:04:20.825] [info] [sql_database.cpp:164] [1969] Delete SQL: DELETE FROM file_details WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_details GROUP BY filename HAVING MAX(create_time)); +[2026-05-03 07:04:20.828] [info] [sql_database.cpp:164] [1969] Delete SQL: DELETE FROM file_thumbnail WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_thumbnail GROUP BY filename); +[2026-05-03 07:04:20.832] [info] [record_manager.cpp:302] [1969] Loaded 0 tasks from the database. +[2026-05-03 07:04:20.833] [info] [record_manager.cpp:318] [1969] Loaded 8 files from the database. +[2026-05-03 07:04:20.834] [info] [record_manager.cpp:323] [1969] Loaded 8 thumbnails from the database. +[2026-05-03 07:04:20.877] [info] [record_manager.cpp:328] [1969] Loaded 0 delete file records from the database. +[2026-05-03 07:04:20.956] [info] [sql_database.cpp:404] [1969] Loaded exception message: id 1, code 801 +[2026-05-03 07:04:20.957] [info] [sql_database.cpp:404] [1969] Loaded exception message: id 2, code 801 +[2026-05-03 07:04:20.957] [info] [record_manager.cpp:333] [1969] Loaded 2 exception messages from the database. +[2026-05-03 07:04:20.958] [info] [record_manager.cpp:820] [1969] File exists: /opt/usr/gcode/local/ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-03 07:04:20.961] [info] [record_manager.cpp:820] [1969] File exists: /opt/usr/gcode/local/ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-03 07:04:20.963] [info] [record_manager.cpp:820] [1969] File exists: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 07:04:20.964] [info] [record_manager.cpp:820] [1969] File exists: /opt/usr/gcode/local/ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-03 07:04:20.965] [info] [record_manager.cpp:820] [1969] File exists: /opt/usr/gcode/local/ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-03 07:04:20.966] [info] [record_manager.cpp:820] [1969] File exists: /opt/usr/gcode/local/ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-03 07:04:20.966] [info] [record_manager.cpp:820] [1969] File exists: /opt/usr/gcode/local/ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-03 07:04:20.967] [info] [record_manager.cpp:820] [1969] File exists: /opt/usr/gcode/local/ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-03 07:04:20.967] [info] [record_manager.cpp:365] [1969] RecordManager initialized successfully. +[2026-05-03 07:04:20.991] [info] [pins.cpp:112] [1969] create PrinterPins success! +[2026-05-03 07:04:21.043] [info] [msgproto.cpp:606] [1969] create MessageParser success! +[2026-05-03 07:04:21.044] [info] [mcu.cpp:1963] [1969] restart_via_remoterpc +[2026-05-03 07:04:21.044] [error] [serialhdl.cpp:309] [1969] SerialReader::disconnect() +[2026-05-03 07:04:21.044] [info] [dsp_helper.h:31] [1969] remoterpc_ctrl 0 +[2026-05-03 07:04:21.045] [info] [webhooks.cpp:56] [1969] webhooks client 36365908: New connection +[2026-05-03 07:04:21.052] [info] [webhooks.cpp:1213] [1969] handle_query is_subscribe true : {"canvas_dev":["canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[2026-05-03 07:04:21.053] [info] [webhooks.cpp:1213] [1969] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[2026-05-03 07:04:21.054] [info] [device_ui_message_handle.cpp:47] [1969] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[2026-05-03 07:04:21.055] [info] [device_ui_message_handle.cpp:485] [1969] Total tasks: 0 +[2026-05-03 07:04:21.055] [info] [webhooks.cpp:787] [1969] return handle_sync_info: {"history_task_list":null,"offset":0,"script":"get_history_task","total":0} +[2026-05-03 07:04:21.055] [info] [webhooks.cpp:170] [1969] return total: {"id":6,"method":"sync_info","result":{"history_task_list":null,"offset":0,"script":"get_history_task","total":0}} +[2026-05-03 07:04:21.059] [warning] [webhooks.cpp:148] [1969] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 07:04:21.059] [info] [webhooks.cpp:170] [1969] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":8} +[2026-05-03 07:04:21.060] [info] [webhooks.cpp:170] [1969] return total: {"id":10,"result":{}} +[2026-05-03 07:04:21.061] [warning] [webhooks.cpp:148] [1969] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 07:04:21.061] [info] [webhooks.cpp:170] [1969] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":12} +[2026-05-03 07:04:21.062] [info] [device_ui_message_handle.cpp:237] [1969] Handling bind function request {"script":"get_device_info"} +[2026-05-03 07:04:21.062] [info] [webhooks.cpp:756] [1969] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-05-03 07:04:21.063] [info] [webhooks.cpp:170] [1969] return total: {"id":14,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-05-03 07:04:21.063] [info] [device_ui_message_handle.cpp:47] [1969] Handling sync info request {"region_code":1,"script":"set_region"} +[2026-05-03 07:04:21.063] [info] [device_ui_message_handle.cpp:111] [1969] Handling set region request 1 +[2026-05-03 07:04:21.063] [info] [device_ui_message_handle.cpp:114] [1969] Region is the same as current region: 1 +[2026-05-03 07:04:21.064] [info] [webhooks.cpp:787] [1969] return handle_sync_info: {"script":"set_region"} +[2026-05-03 07:04:21.064] [info] [webhooks.cpp:170] [1969] return total: {"id":16,"method":"sync_info","result":{"script":"set_region"}} +[2026-05-03 07:04:21.069] [info] [webhooks.cpp:170] [1969] return total: {"id":4,"result":{"eventtime":24.295918761,"status":null}} +[2026-05-03 07:04:21.071] [warning] [webhooks.cpp:148] [1969] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 07:04:21.071] [info] [webhooks.cpp:170] [1969] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":7} +[2026-05-03 07:04:21.072] [info] [device_ui_message_handle.cpp:303] [1969] Get Network access cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[2026-05-03 07:04:21.072] [info] [webhooks.cpp:744] [1969] return handle_get_network_access_cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[2026-05-03 07:04:21.072] [info] [webhooks.cpp:170] [1969] return total: {"id":11,"method":"get_network_access_cfg","result":{"object":{"lan_status":false,"token":"miM2yt","token_status":true}}} +[2026-05-03 07:04:21.072] [info] [device_ui_message_handle.cpp:47] [1969] Handling sync info request {"script":"get_device_status"} +[2026-05-03 07:04:21.072] [info] [device_ui_message_handle.cpp:125] [1969] Handling get device status request +[2026-05-03 07:04:21.103] [info] [device_ui_message_handle.cpp:136] [1969] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-03 07:04:21.105] [info] [webhooks.cpp:787] [1969] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-03 07:04:21.105] [info] [webhooks.cpp:170] [1969] return total: {"id":15,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[2026-05-03 07:04:21.107] [info] [webhooks.cpp:170] [1969] return total: {"id":5,"result":{"eventtime":24.295918761,"status":null}} +[2026-05-03 07:04:21.556] [warning] [webhooks.cpp:148] [1969] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 07:04:21.557] [info] [webhooks.cpp:170] [1969] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":9} +[2026-05-03 07:04:21.557] [info] [device_ui_message_handle.cpp:47] [1969] Handling sync info request {"script":"set_status","status":1,"sub_status":0} +[2026-05-03 07:04:21.557] [info] [device_ui_message_handle.cpp:535] [1969] Setting status: 1, sub_status: 0 +[2026-05-03 07:04:21.557] [info] [device_status.cpp:1023] [1969] Set UI ready: true +[2026-05-03 07:04:21.560] [info] [webhooks.cpp:787] [1969] return handle_sync_info: {"script":"set_status"} +[2026-05-03 07:04:21.561] [info] [webhooks.cpp:170] [1969] return total: {"id":17,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 07:04:22.046] [info] [dsp_helper.h:31] [1969] remoterpc_ctrl 1 +[2026-05-03 07:04:22.161] [warning] [webhooks.cpp:148] [1969] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 07:04:22.162] [info] [webhooks.cpp:170] [1969] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":13} +[2026-05-03 07:04:23.162] [info] [msgproto.cpp:606] [1969] create MessageParser success! +[2026-05-03 07:04:23.164] [info] [mcu.cpp:1049] [1969] MCU 'bed_sensor' restart power +[2026-05-03 07:04:23.574] [info] [mcu.cpp:1072] [1969] bootloader mode, try jump to app! +[2026-05-03 07:04:23.599] [info] [msgproto.cpp:606] [1969] create MessageParser success! +[2026-05-03 07:04:23.601] [info] [mcu.cpp:1049] [1969] MCU 'toolhead' restart power +[2026-05-03 07:04:24.011] [info] [mcu.cpp:1072] [1969] bootloader mode, try jump to app! +[2026-05-03 07:04:24.069] [info] [bed_mesh.cpp:1466] [1969] zero_ref_pos size 0 +[2026-05-03 07:04:24.105] [info] [bed_mesh.cpp:2722] [1969] ProfileManager profile->get_name bed_mesh +[2026-05-03 07:04:24.105] [info] [bed_mesh.cpp:2722] [1969] ProfileManager profile->get_name bed_mesh ADAPTIVE +[2026-05-03 07:04:24.105] [info] [bed_mesh.cpp:2722] [1969] ProfileManager profile->get_name bed_mesh default +[2026-05-03 07:04:24.110] [info] [gcode_move.cpp:60] [1969] GCodeMove init! +[2026-05-03 07:04:24.151] [info] [gcode_move.cpp:119] [1969] GCodeMove init success!! +[2026-05-03 07:04:24.151] [info] [gcode_move.cpp:274] [1969] set_move_transform transform: force:false +[2026-05-03 07:04:24.211] [info] [print_stats.cpp:26] [1969] PrintStats init! +[2026-05-03 07:04:24.212] [info] [print_stats.cpp:55] [1969] PrintStats init success!! +[2026-05-03 07:04:24.213] [info] [bed_mesh.cpp:463] [1969] update_status bed_mesh_exist:0x0100 +[2026-05-03 07:04:24.213] [info] [print_stats.cpp:277] [1969] bed_mesh_exist:0x0100 +[2026-05-03 07:04:24.213] [warning] [extras_factory.cpp:318] [1969] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-03 07:04:24.213] [warning] [extras_factory.cpp:318] [1969] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-03 07:04:24.214] [info] [beep_ctrl.cpp:39] [1969] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[2026-05-03 07:04:24.216] [info] [beep_ctrl.cpp:137] [1969] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[2026-05-03 07:04:24.216] [info] [beep_ctrl.cpp:252] [1969] exec_cmd data 0 +[2026-05-03 07:04:24.218] [info] [beep_ctrl.cpp:171] [1969] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[2026-05-03 07:04:24.218] [info] [beep_ctrl.cpp:252] [1969] exec_cmd data 333333 +[2026-05-03 07:04:24.218] [info] [beep_ctrl.cpp:189] [1969] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[2026-05-03 07:04:24.218] [info] [beep_ctrl.cpp:252] [1969] exec_cmd data 166666 +[2026-05-03 07:04:24.219] [info] [beep_ctrl.cpp:207] [1969] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[2026-05-03 07:04:24.219] [info] [beep_ctrl.cpp:252] [1969] exec_cmd data normal +[2026-05-03 07:04:24.221] [info] [query_adc.cpp:36] [1969] QueryADC init success! +[2026-05-03 07:04:24.223] [info] [mmu.cpp:1442] [1969] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[2026-05-03 07:04:24.223] [info] [mmu.cpp:1460] [1969] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[2026-05-03 07:04:24.251] [info] [cavity_fan.cpp:36] [1969] PrinterFanCavity init! +[2026-05-03 07:04:24.251] [info] [cavity_fan.cpp:96] [1969] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[2026-05-03 07:04:24.252] [info] [cavity_fan.cpp:107] [1969] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[2026-05-03 07:04:24.252] [info] [cavity_fan.cpp:115] [1969] temp_drop_det_time 1 5 2 1.5 3 +[2026-05-03 07:04:24.253] [info] [fan.cpp:55] [1969] __func__:Fan #1 str_pin:PD17 +[2026-05-03 07:04:24.253] [info] [cavity_fan.cpp:119] [1969] PrinterFanCavity init success!! +[2026-05-03 07:04:24.254] [info] [stepper_enable.cpp:27] [1969] PrinterStepperEnable init! +[2026-05-03 07:04:24.256] [info] [fan.cpp:55] [1969] __func__:Fan #1 str_pin:PG15 +[2026-05-03 07:04:24.258] [info] [fan.cpp:55] [1969] __func__:Fan #1 str_pin:toolhead:PA8 +[2026-05-03 07:04:24.261] [info] [fan.cpp:55] [1969] __func__:Fan #1 str_pin:PD15 +[2026-05-03 07:04:24.272] [warning] [extras_factory.cpp:318] [1969] create extras: "g180_load_config" failer! +[2026-05-03 07:04:24.274] [info] [heater_bed.cpp:18] [1969] PrinterHeaterBed Init! +[2026-05-03 07:04:24.274] [info] [heaters.cpp:836] [1969] PrinterHeaters init! +[2026-05-03 07:04:24.276] [info] [heaters.cpp:861] [1969] PrinterHeaters init success! +[2026-05-03 07:04:24.319] [info] [heaters.cpp:897] [1969] c->get_name(): thermistor NTC 100K beta 3950 +[2026-05-03 07:04:24.320] [info] [thermistor.cpp:138] [1969] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[2026-05-03 07:04:24.320] [info] [heaters.cpp:897] [1969] c->get_name(): thermistor NTC 100K beta 3950 DSP +[2026-05-03 07:04:24.321] [info] [thermistor.cpp:138] [1969] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[2026-05-03 07:04:24.441] [info] [utilities.cpp:52] [1969] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[2026-05-03 07:04:24.442] [info] [thermistor.cpp:146] [1969] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[2026-05-03 07:04:24.443] [info] [heaters.cpp:897] [1969] c->get_name(): thermistor NTC 100K beta 4300 +[2026-05-03 07:04:24.444] [info] [thermistor.cpp:138] [1969] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[2026-05-03 07:04:24.444] [info] [heaters.cpp:897] [1969] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[2026-05-03 07:04:24.444] [info] [thermistor.cpp:138] [1969] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[2026-05-03 07:04:24.445] [info] [heaters.cpp:897] [1969] c->get_name(): thermistor NTC R25 350 +[2026-05-03 07:04:24.445] [info] [thermistor.cpp:138] [1969] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[2026-05-03 07:04:24.446] [info] [heaters.cpp:905] [1969] PrinterHeaters::load_config success! +[2026-05-03 07:04:24.446] [info] [heaters.cpp:994] [1969] setup_sensor success! +[2026-05-03 07:04:24.446] [info] [adc_temperature.cpp:29] [1969] __func__:PrinterADCtoTemperature name:heater_bed +[2026-05-03 07:04:24.447] [info] [adc_temperature.cpp:35] [1969] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[2026-05-03 07:04:24.447] [info] [adc_temperature.cpp:165] [1969] name:heater_bed +[2026-05-03 07:04:24.447] [info] [error_mcu.cpp:101] [1969] create PrinterMCUError success! +[2026-05-03 07:04:24.449] [info] [heaters.cpp:83] [1969] Heater init! name: heater_bed +[2026-05-03 07:04:24.449] [info] [heaters.cpp:119] [1969] __func__:Heater,heater_pin:PG13 +[2026-05-03 07:04:24.450] [info] [pid_calibrate.cpp:43] [1969] PIDCalibrate init success!! +[2026-05-03 07:04:24.451] [warning] [heaters.cpp:322] [1969] Heater init success!!!! +[2026-05-03 07:04:24.452] [warning] [heaters.cpp:947] [1969] debug name heater_bed, gcode_id B +[2026-05-03 07:04:24.453] [info] [heater_bed.cpp:41] [1969] PrinterHeaterBed Init success! +[2026-05-03 07:04:24.453] [info] [heater_fan.cpp:24] [1969] PrinterHeaterFan init! +[2026-05-03 07:04:24.454] [info] [fan.cpp:55] [1969] __func__:Fan #1 str_pin:toolhead:PB13 +[2026-05-03 07:04:24.455] [info] [heater_fan.cpp:46] [1969] PrinterHeaterFan init success!! +[2026-05-03 07:04:24.458] [info] [idle_timeout.cpp:28] [1969] init IdleTimeout ... +[2026-05-03 07:04:24.460] [info] [idle_timeout.cpp:72] [1969] init IdleTimeout success !!! +[2026-05-03 07:04:24.514] [info] [bulk_sensor.cpp:312] [1969] unpack_fmt:mqtt_strategy_->is_valid(): true +[2026-05-03 07:04:30.558] [info] [device_ui_message_handle.cpp:356] [2035] report_error: {"id":0,"report":{"error_code":2002,"error_level":3,"message":"connect mqtt success"}} +[2026-05-03 07:04:30.559] [info] [timer_manager.cpp:72] [2035] Adding timer task: WanStrategy_sync_device_info, interval: 100 ms, repeat: false +[2026-05-03 07:04:30.559] [info] [device_status.cpp:1445] [2035] post_all_dev_message +[2026-05-03 07:04:30.565] [info] [device_status.cpp:1459] [2035] post_all_dev_message {"canvas_info":{"active_canvas_id":0,"active_tray_id":0,"auto_refill":false,"canvas_list":[{"canvas_id":0,"connected":0,"tray_list":[{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":0},{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":0},{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":0},{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":0}]}]},"device_assistant":{"status":1},"external_device":{"camera":false,"type":"0","u_disk":false},"extruder":{"filament_detect_enable":0,"filament_detected":0,"target":0,"temperature":0},"fans":{"aux_fan":{"speed":0.0},"box_fan":{"speed":0.0},"controller_fan":{"speed":0.0},"fan":{"speed":0.0},"heater_fan":{"speed":0.0}},"foreign_object_detection":{"status":0},"gcode_move":{"extruder":0.0,"speed":0,"speed_mode":4,"x":0.0,"y":0.0,"z":0.0},"heater_bed":{"target":0,"temperature":0},"led":{"status":0},"machine_status":{"exception_status":[],"progress":0,"status":1,"sub_status":0,"sub_status_reason_code":0},"mono_filament_info":{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":0},"print_status":{"bed_mesh_detect":false,"current_layer":0,"enable":false,"filament_detect":false,"filename":"","print_duration":0,"remaining_time_sec":0,"state":"","total_duration":0,"uuid":""},"spaghetti_detection":{"frequency":"medium","handing":"pause","status":0},"tool_head":{"homed_axes":""},"ztemperature_sensor":{"measured_max_temperature":0,"measured_min_temperature":0,"temperature":0}} +[2026-05-03 07:04:30.567] [info] [device_status.cpp:956] [2035] Report exception codes to cloud : {"exception":{"exception_code":{}},"meta_data":{"id":1777763070566}} +[2026-05-03 07:04:30.568] [info] [device_status.cpp:1119] [2035] get sync history tasks +[2026-05-03 07:04:30.569] [info] [device_status.cpp:1129] [2035] Total tasks: 0 +[2026-05-03 07:04:30.569] [warning] [mqtt_connector.cpp:400] [2035] No history tasks to sync. +[2026-05-03 07:04:30.571] [info] [mqtt_connector.cpp:295] [2035] Subscribed to topic: server/service/F01CFFQQFN55YKS/down +[2026-05-03 07:04:30.663] [info] [record_manager.cpp:1311] [2033] Starting sync +[2026-05-03 07:04:30.714] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_SOFTWARE_VERSION","result":"00.00.00.44"} +[2026-05-03 07:04:31.672] [info] [clocksync.cpp:199] [2026] mcu 'toolhead': New minimum RTT: sent_time=34.912181349,half_rtt=0.00026216700000247783,freq=119997287.83897121 +[2026-05-03 07:04:35.611] [info] [clocksync.cpp:199] [2026] mcu 'toolhead': New minimum RTT: sent_time=38.850759642999996,half_rtt=0.0002598335000030261,freq=119997740.78823285 +[2026-05-03 07:04:36.595] [info] [clocksync.cpp:199] [2026] mcu 'toolhead': New minimum RTT: sent_time=39.835108977,half_rtt=0.00025916650000112895,freq=119997787.4593651 +[2026-05-03 07:04:44.472] [info] [clocksync.cpp:199] [2026] mcu 'toolhead': New minimum RTT: sent_time=47.71196648,half_rtt=0.0002582295000017609,freq=119998050.69766046 +[2026-05-03 07:04:51.364] [info] [clocksync.cpp:199] [2024] mcu 'bed_sensor': New minimum RTT: sent_time=54.603269234,half_rtt=0.00017437500000028194,freq=119998234.62571877 +[2026-05-03 07:04:56.015] [info] [mmu.cpp:4164] [1969] configuration of device consumable information +[2026-05-03 07:04:56.015] [info] [mmu.cpp:4183] [1969] CMD_canvas_set_filament_info type PLA detailed_type PLA color 0xFFFFFF +[2026-05-03 07:04:56.015] [info] [webhooks.cpp:170] [1969] return total: {"id":32,"result":{}} +[2026-05-03 07:04:56.072] [info] [mmu.cpp:1926] [2062] save record info success +[2026-05-03 07:04:57.269] [info] [clocksync.cpp:199] [2024] mcu 'bed_sensor': New minimum RTT: sent_time=60.509318737,half_rtt=0.00016954150000003665,freq=119998199.78063068 +[2026-05-03 07:04:59.245] [info] [clocksync.cpp:199] [2026] mcu 'toolhead': New minimum RTT: sent_time=62.484189154,half_rtt=0.00025781250000278533,freq=119998243.15163474 +[2026-05-03 07:05:01.213] [info] [clocksync.cpp:199] [2026] mcu 'toolhead': New minimum RTT: sent_time=64.45278690500001,half_rtt=0.0002533959999979629,freq=119998247.97048084 +[2026-05-03 07:05:04.166] [info] [clocksync.cpp:199] [2018] mcu 'mcu': New minimum RTT: sent_time=67.406457115,half_rtt=9.147900000527898e-05,freq=24000000.810279768 +[2026-05-03 07:05:38.625] [info] [clocksync.cpp:199] [2026] mcu 'toolhead': New minimum RTT: sent_time=101.864919923,half_rtt=0.00025293750000088266,freq=119998321.70020658 +[2026-05-03 07:05:42.935] [info] [webhooks.cpp:170] [1969] return total: {"id":33,"result":{}} +[2026-05-03 07:05:42.938] [info] [bed_mesh.cpp:638] [1969] execute_calirate_from_slicer 1 +[2026-05-03 07:05:42.938] [info] [webhooks.cpp:170] [1969] return total: {"id":34,"result":{}} +[2026-05-03 07:05:43.062] [info] [mmu.cpp:4731] [1969] CMD_used_canvas_dev, use canvas 1 +[2026-05-03 07:05:43.063] [info] [webhooks.cpp:170] [1969] return total: {"id":35,"result":{}} +[2026-05-03 07:05:43.066] [info] [mmu.cpp:4347] [1969] Configure channel mapping +[2026-05-03 07:05:43.066] [info] [mmu.cpp:4378] [1969] CMD_canvas_set_color_table #1 T_vec.size 2 table_T 0 table_color 0x0 table_channel 0 +[2026-05-03 07:05:43.066] [info] [mmu.cpp:4378] [1969] CMD_canvas_set_color_table #1 T_vec.size 2 table_T 1 table_color 0xffffff table_channel 1 +[2026-05-03 07:05:43.067] [info] [webhooks.cpp:170] [1969] return total: {"id":36,"result":{}} +[2026-05-03 07:05:43.075] [info] [virtual_sdcard.cpp:1159] [1969] cmd_SDCARD_PRINT_FILE slice_cfg_model:true filename=local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 07:05:43.075] [info] [virtual_sdcard.cpp:1109] [1969] _reset_file +[2026-05-03 07:05:43.075] [info] [virtual_sdcard.cpp:1048] [1969] do_pause +[2026-05-03 07:05:43.076] [info] [cavity_fan.cpp:220] [1969] handle_print_state value standby is_printing false +[2026-05-03 07:05:43.076] [info] [idle_timeout.cpp:138] [1969] handle_print_state print_state:standby +[2026-05-03 07:05:43.076] [info] [virtual_sdcard.cpp:1499] [1969] fname /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 07:05:43.076] [info] [virtual_sdcard.cpp:1520] [1969] VirtualSD File opened: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode, Size:6055579 +[2026-05-03 07:05:43.078] [info] [cavity_fan.cpp:220] [1969] handle_print_state value standby is_printing false +[2026-05-03 07:05:43.078] [info] [idle_timeout.cpp:138] [1969] handle_print_state print_state:standby +[2026-05-03 07:05:43.078] [info] [device_status.cpp:1478] [1969] Start Printing, clear filename +[2026-05-03 07:05:43.078] [info] [device_status.cpp:1483] [1969] Device status change to: 2, last status: 1 +[2026-05-03 07:05:43.080] [info] [device_status.cpp:1810] [1969] Add print task: id: 9052df81-606e-47e9-ab30-68836972683f, name: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode, printer_time: 4998, time lapse: 0 +[2026-05-03 07:05:43.080] [info] [virtual_sdcard.cpp:1016] [1969] do_print_det __start +[2026-05-03 07:05:43.081] [info] [virtual_sdcard.cpp:1029] [1969] do_print_det print_det_value true is_print_det true is_do_resume true print_det_state 2 +[2026-05-03 07:05:43.081] [info] [virtual_sdcard.cpp:1061] [1969] do_resume +[2026-05-03 07:05:43.081] [info] [virtual_sdcard.cpp:1042] [1969] do_print_det __over +[2026-05-03 07:05:43.081] [info] [webhooks.cpp:170] [1969] return total: {"id":37,"result":{}} +[2026-05-03 07:05:43.082] [info] [virtual_sdcard.cpp:1613] [1969] Starting SD card print (position 0) +[2026-05-03 07:05:43.082] [info] [print_stats.cpp:90] [1969] note_start state printing +[2026-05-03 07:05:43.082] [info] [cavity_fan.cpp:189] [1969] update_timer(fan_timer, _NOW +[2026-05-03 07:05:43.082] [info] [cavity_fan.cpp:190] [1969] value printing is_printing true +[2026-05-03 07:05:43.082] [info] [idle_timeout.cpp:138] [1969] handle_print_state print_state:printing +[2026-05-03 07:05:43.083] [info] [cavity_fan.cpp:574] [1969] mode:false cur_box_temp:28.84420835644221 last_speed:0 -> speed:0.1 +[2026-05-03 07:05:43.083] [info] [virtual_sdcard.cpp:934] [1969] print_det_handler print_det_value true +[2026-05-03 07:05:43.084] [info] [bed_mesh.cpp:647] [1969] adaptive_ignore_state 0 +[2026-05-03 07:05:43.086] [info] [gcode.cpp:914] [1969] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=0, BED_MESH_PROFILE=0 +[2026-05-03 07:05:43.086] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:05:43.089] [info] [gcode.cpp:879] [1969] cmd_SET_CONDITION A=BED_MESH_DATEA, B=false, BED_MESH_DATEA=256 +[2026-05-03 07:05:43.090] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = true +[2026-05-03 07:05:43.091] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:05:43.092] [info] [gcode.cpp:914] [1969] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=1, BED_MESH_PROFILE=0 +[2026-05-03 07:05:43.092] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = true +[2026-05-03 07:05:43.094] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:05:43.096] [info] [gcode.cpp:914] [1969] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=0, BED_MESH_PROFILE=0 +[2026-05-03 07:05:43.096] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:05:43.097] [info] [gcode_move.cpp:670] [1969] cmd_SET_GCODE_OFFSET pos:2 base_position[pos]:0 homing_position[pos]:0 bed_roughness_offset:-0.06 z_offset:0 offset:-0.06 +[2026-05-03 07:05:43.097] [info] [gcode_move.cpp:699] [1969] cmd_SET_GCODE_OFFSET : 699___ ok +[2026-05-03 07:05:43.098] [info] [bed_mesh.cpp:2901] [1969] cmd_BED_MESH_PROFILE: from_slicer 0 execute_calirate_from_slicer 1 +[2026-05-03 07:05:43.118] [info] [bed_mesh.cpp:463] [1969] update_status bed_mesh_exist:0x0100 +[2026-05-03 07:05:43.119] [info] [print_stats.cpp:277] [1969] bed_mesh_exist:0x0100 +[2026-05-03 07:05:43.119] [info] [bed_mesh.cpp:2875] [1969] ProfileManager::load_profile default time 0.02054495800000211 +[2026-05-03 07:05:43.122] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:05:43.122] [info] [gcode.cpp:914] [1969] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=1, BED_MESH_PROFILE=0 +[2026-05-03 07:05:43.123] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = true +[2026-05-03 07:05:43.123] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:05:43.124] [info] [virtual_sdcard.cpp:954] [1969] print_det_handler print_det_state 3 score_state 0xff +[2026-05-03 07:05:44.125] [info] [virtual_sdcard.cpp:1447] [1969] emit gcode:cool_down is_start_print true +[2026-05-03 07:05:44.125] [info] [mmu.cpp:4815] [1969] get_fila_type connect_status 1 fila_type.size 2 channel_color_table.size:2 +[2026-05-03 07:05:44.125] [info] [mmu.cpp:4829] [1969] get_fila_type cavity_temp_mode:false +[2026-05-03 07:05:44.126] [info] [servo.cpp:272] [1969] CMD_set_cavity_temperature_mode mode:0 +[2026-05-03 07:05:44.126] [info] [servo.cpp:249] [1969] start grille open check. +[2026-05-03 07:05:44.126] [info] [cavity_fan.cpp:255] [1969] cool_down_cavity_temp fila_type[0]:PLA,fila_type[i].size:3,fila_type.size:2 +[2026-05-03 07:05:44.126] [info] [cavity_fan.cpp:263] [1969] find_fila_type:0 fila_box_temp:40 +[2026-05-03 07:05:44.126] [info] [cavity_fan.cpp:298] [1969] std::isnan(fila_temp):false fila_box_temp:40 +[2026-05-03 07:05:44.126] [info] [cavity_fan.cpp:311] [1969] fila_box_temp:40,iType:0 +[2026-05-03 07:05:44.126] [info] [cavity_fan.cpp:255] [1969] cool_down_cavity_temp fila_type[1]:PLA,fila_type[i].size:3,fila_type.size:2 +[2026-05-03 07:05:44.127] [info] [cavity_fan.cpp:263] [1969] find_fila_type:0 fila_box_temp:40 +[2026-05-03 07:05:44.127] [info] [cavity_fan.cpp:298] [1969] std::isnan(fila_temp):false fila_box_temp:40 +[2026-05-03 07:05:44.127] [info] [cavity_fan.cpp:311] [1969] fila_box_temp:40,iType:0 +[2026-05-03 07:05:44.127] [info] [pause_resume.cpp:126] [1969] PauseResume cool_down_state 0x0e +[2026-05-03 07:05:44.127] [info] [virtual_sdcard.cpp:166] [1969] VirtualSD cool_down_state 0x0e +[2026-05-03 07:05:44.127] [info] [cavity_fan.cpp:331] [1969] update_timer(cavity_temp_timer, _NEVER +[2026-05-03 07:05:44.127] [info] [cavity_fan.cpp:333] [1969] cool_down_cavity_temp iType:0 fila_box_temp:40 cur_box_temp 28.848761610585825 cool_down_state 0x0e +[2026-05-03 07:05:45.128] [info] [virtual_sdcard.cpp:970] [1969] print_det_handler print_det_state 4 score_state 0xff cool_down_state 0x0e +[2026-05-03 07:05:45.128] [info] [virtual_sdcard.cpp:987] [1969] print_det_handler print_det_state 4 is_print_det false +[2026-05-03 07:05:45.128] [info] [virtual_sdcard.cpp:996] [1969] print_det_handler __over is_print_det false print_stop false cool_down_state 0x0e score_state 0xff +[2026-05-03 07:05:45.895] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:05:45.896] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:05:45.896] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:05:45.896] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:05:45.896] [info] [extruder.cpp:501] [1969] cmd_M104 temp 140 index -1 wait false +[2026-05-03 07:05:45.897] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:140,wait:false +[2026-05-03 07:05:45.897] [info] [heater_bed.cpp:57] [1969] cmd_M140 temp 60 wait false +[2026-05-03 07:05:45.897] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 07:05:45.898] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 07:05:45.898] [info] [gcode.cpp:544] [1969] respond_ecode: Heater heater_bed not heating at expected rate, error_code: 101 error_level 3 +[2026-05-03 07:05:45.898] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 07:05:45.898] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:60,wait:false +[2026-05-03 07:05:45.899] [info] [device_status.cpp:832] [1969] M2202 result_code:1405 +[2026-05-03 07:05:45.900] [info] [heater_bed.cpp:57] [1969] cmd_M140 temp 60 wait true +[2026-05-03 07:05:45.901] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 07:05:45.901] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 07:05:45.901] [info] [gcode.cpp:544] [1969] respond_ecode: Heater heater_bed not heating at expected rate, error_code: 101 error_level 3 +[2026-05-03 07:05:45.902] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 07:05:45.902] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:60,wait:true +[2026-05-03 07:05:46.747] [info] [verify_heater.cpp:164] [1969] Heater extruder approaching new target of 140 +[2026-05-03 07:05:46.747] [info] [verify_heater.cpp:164] [1969] Heater heater_bed approaching new target of 60 +[2026-05-03 07:06:02.756] [info] [verify_heater.cpp:140] [1969] Heater extruder within range of 140 +[2026-05-03 07:06:22.467] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:120.27800000037998,last_temp:55.15661960803243,temp:55.15661960803243,target_temp:60,smoothed_temp:55.07156400582043 +[2026-05-03 07:06:22.771] [info] [verify_heater.cpp:140] [1969] Heater heater_bed within range of 60 +[2026-05-03 07:06:22.922] [info] [device_status.cpp:832] [1969] M2202 result_code:1066 +[2026-05-03 07:06:22.924] [info] [heaters.cpp:1198] [1969] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 60 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 07:06:22.926] [info] [bed_mesh.cpp:1001] [1969] cmd_BED_MESH_CALIBRATE: from_slicer 1 execute_calirate_from_slicer 1 adaptive_ignore_state 0 +[2026-05-03 07:06:22.932] [info] [bed_mesh.cpp:463] [1969] update_status bed_mesh_exist:0x0100 +[2026-05-03 07:06:22.932] [info] [print_stats.cpp:277] [1969] bed_mesh_exist:0x0100 +[2026-05-03 07:06:22.932] [info] [bed_mesh.cpp:839] [1969] update_config #0 +[2026-05-03 07:06:22.932] [info] [bed_mesh.cpp:844] [1969] update_config #1 +[2026-05-03 07:06:22.932] [info] [bed_mesh.cpp:857] [1969] update_config #2 +[2026-05-03 07:06:22.932] [info] [bed_mesh.cpp:889] [1969] update_config #4 +[2026-05-03 07:06:22.932] [info] [bed_mesh.cpp:925] [1969] update_config #5 +[2026-05-03 07:06:22.932] [info] [bed_mesh.cpp:934] [1969] update_config #6 +[2026-05-03 07:06:22.932] [info] [bed_mesh.cpp:943] [1969] update_config #7 +[2026-05-03 07:06:22.932] [info] [bed_mesh.cpp:947] [1969] update_config #8 +[2026-05-03 07:06:22.933] [info] [bed_mesh.cpp:952] [1969] update_config #9 +[2026-05-03 07:06:22.934] [info] [bed_mesh.cpp:961] [1969] update_config #11 +[2026-05-03 07:06:22.934] [info] [load_cell_probe.cpp:721] [1969] bed_mesh:calibrate event +[2026-05-03 07:06:22.935] [info] [device_status.cpp:832] [1969] M2202 result_code:2901 +[2026-05-03 07:06:22.940] [info] [gcode_move.cpp:52] [1969] G180 select 3 +[2026-05-03 07:06:22.940] [info] [gcode_move.cpp:52] [1969] G180 select 5 +[2026-05-03 07:06:22.940] [info] [homing_override.cpp:238] [1969] need false false false homed false false false +[2026-05-03 07:06:22.941] [info] [device_status.cpp:832] [1969] M2202 result_code:2801 +[2026-05-03 07:06:22.942] [info] [homing_override.cpp:166] [1969] homing_ready axis z +[2026-05-03 07:06:23.196] [info] [homing_override.cpp:175] [1969] homing_ready #2: endstop name z state false +[2026-05-03 07:06:23.468] [info] [gcode.cpp:559] [1969] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 07:06:23.742] [info] [gcode.cpp:559] [1969] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 07:06:23.743] [info] [gcode_move.cpp:629] [1969] cmd_M114 X:5.000 Y:5.000 Z:0.060 E:0.000 +[2026-05-03 07:06:23.744] [info] [stepper.cpp:573] [1969] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 07:06:23.775] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 390.75 +[2026-05-03 07:06:23.775] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 380.75 +[2026-05-03 07:06:23.775] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0 +[2026-05-03 07:06:23.878] [info] [mcu.cpp:712] [1969] set_digital pin PF6 121.858216125 147.119320278 +[2026-05-03 07:06:23.879] [info] [mcu.cpp:712] [1969] set_digital pin PE15 121.858216125 147.120239986 +[2026-05-03 07:06:24.104] [error] [tmc.cpp:359] [1969] TMC stepper_x reports GSTAT: 10000000 reset=1(Reset) +[2026-05-03 07:06:24.111] [error] [tmc.cpp:359] [1969] TMC stepper_y reports GSTAT: 10000000 reset=1(Reset) +[2026-05-03 07:06:24.135] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:06:24.158] [info] [mcu.cpp:634] [1969] home_wait pin_value:1 next_clock:2926691580 +[2026-05-03 07:06:24.159] [info] [homing.cpp:266] [1969] endstop_name x tt 121.94527483333333 trigger_time 121.94527483333333 move_end_print_time 122.19821612499997 +[2026-05-03 07:06:24.159] [info] [homing.cpp:266] [1969] endstop_name x tt 121.94527483333333 trigger_time 121.94527483333333 move_end_print_time 122.19821612499997 +[2026-05-03 07:06:24.159] [info] [homing.cpp:309] [1969] stepper_name stepper_x over_steps 0 halt_pos -347 start_pos 0 trig_pos -347 +[2026-05-03 07:06:24.159] [info] [homing.cpp:309] [1969] stepper_name stepper_y over_steps 0 halt_pos -347 start_pos 0 trig_pos -347 +[2026-05-03 07:06:24.193] [info] [gcode.cpp:544] [1969] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 07:06:24.194] [info] [stepper.cpp:573] [1969] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 07:06:24.800] [info] [gcode_move.cpp:629] [1969] cmd_M114 X:8.000 Y:5.000 Z:0.060 E:0.000 +[2026-05-03 07:06:24.801] [info] [gcode_move.cpp:629] [1969] cmd_M114 X:8.000 Y:5.000 Z:0.060 E:0.000 +[2026-05-03 07:06:24.802] [info] [stepper.cpp:573] [1969] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 07:06:24.832] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 414 +[2026-05-03 07:06:24.832] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -398 +[2026-05-03 07:06:24.832] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0 +[2026-05-03 07:06:28.609] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:126.41969406598142,last_temp:140.97016989432024,temp:140.97016989432024,target_temp:140,smoothed_temp:141.38953005432353 +[2026-05-03 07:06:29.538] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:06:29.540] [info] [serialhdl.cpp:507] [2018] mcu 'mcu': got handle_default name: trsync_state +[2026-05-03 07:06:29.549] [warning] [tmc.cpp:887] [1969] Stepper stepper_y phase change (was 3 now -61) +[2026-05-03 07:06:29.566] [info] [mcu.cpp:634] [1969] home_wait pin_value:1 next_clock:3056384416 +[2026-05-03 07:06:29.568] [info] [homing.cpp:266] [1969] endstop_name y tt 127.349143 trigger_time 127.349143 move_end_print_time 127.60540370833306 +[2026-05-03 07:06:29.568] [info] [homing.cpp:266] [1969] endstop_name y tt 127.349143 trigger_time 127.349143 move_end_print_time 127.60540370833306 +[2026-05-03 07:06:29.569] [info] [homing.cpp:309] [1969] stepper_name stepper_y over_steps 0 halt_pos 21734 start_pos 456 trig_pos 21734 +[2026-05-03 07:06:29.569] [info] [homing.cpp:309] [1969] stepper_name stepper_x over_steps 0 halt_pos -20822 start_pos 456 trig_pos -20822 +[2026-05-03 07:06:29.599] [info] [gcode.cpp:544] [1969] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 07:06:29.600] [info] [stepper.cpp:573] [1969] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 07:06:30.206] [info] [gcode_move.cpp:629] [1969] cmd_M114 X:8.000 Y:8.000 Z:0.060 E:0.000 +[2026-05-03 07:06:30.207] [info] [gcode_move.cpp:629] [1969] cmd_M114 X:8.000 Y:8.000 Z:0.060 E:0.000 +[2026-05-03 07:06:30.208] [info] [stepper.cpp:573] [1969] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 07:06:30.238] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 393.75 +[2026-05-03 07:06:30.239] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 377.75 +[2026-05-03 07:06:30.239] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0 +[2026-05-03 07:06:31.532] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:06:31.551] [info] [mcu.cpp:634] [1969] home_wait pin_value:1 next_clock:3104218878 +[2026-05-03 07:06:31.553] [info] [homing.cpp:266] [1969] endstop_name x tt 129.342245625 trigger_time 129.342245625 move_end_print_time 129.593999125 +[2026-05-03 07:06:31.553] [info] [homing.cpp:266] [1969] endstop_name x tt 129.342245625 trigger_time 129.342245625 move_end_print_time 129.593999125 +[2026-05-03 07:06:31.553] [info] [homing.cpp:309] [1969] stepper_name stepper_x over_steps 0 halt_pos -24860 start_pos -20019 trig_pos -24860 +[2026-05-03 07:06:31.553] [info] [homing.cpp:309] [1969] stepper_name stepper_y over_steps 0 halt_pos 16090 start_pos 20931 trig_pos 16090 +[2026-05-03 07:06:31.590] [info] [gcode.cpp:544] [1969] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 07:06:31.591] [info] [stepper.cpp:573] [1969] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 07:06:32.197] [info] [gcode_move.cpp:629] [1969] cmd_M114 X:8.000 Y:8.000 Z:0.060 E:0.000 +[2026-05-03 07:06:32.198] [info] [gcode_move.cpp:629] [1969] cmd_M114 X:8.000 Y:8.000 Z:0.060 E:0.000 +[2026-05-03 07:06:32.199] [info] [stepper.cpp:573] [1969] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 07:06:32.230] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 414 +[2026-05-03 07:06:32.230] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -398 +[2026-05-03 07:06:32.230] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0 +[2026-05-03 07:06:32.683] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:06:32.704] [info] [mcu.cpp:634] [1969] home_wait pin_value:1 next_clock:3131860007 +[2026-05-03 07:06:32.705] [info] [homing.cpp:266] [1969] endstop_name y tt 130.49395933333332 trigger_time 130.49395933333332 move_end_print_time 130.75416800000013 +[2026-05-03 07:06:32.706] [info] [homing.cpp:266] [1969] endstop_name y tt 130.49395933333332 trigger_time 130.49395933333332 move_end_print_time 130.75416800000013 +[2026-05-03 07:06:32.706] [info] [homing.cpp:309] [1969] stepper_name stepper_y over_steps 0 halt_pos 17687 start_pos 16893 trig_pos 17687 +[2026-05-03 07:06:32.706] [info] [homing.cpp:309] [1969] stepper_name stepper_x over_steps 0 halt_pos -24851 start_pos -24057 trig_pos -24851 +[2026-05-03 07:06:32.738] [info] [gcode.cpp:544] [1969] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 07:06:32.740] [info] [stepper.cpp:573] [1969] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 07:06:32.741] [info] [gcode_move.cpp:629] [1969] cmd_M114 X:8.000 Y:8.000 Z:0.060 E:0.000 +[2026-05-03 07:06:33.325] [info] [gcode.cpp:559] [1969] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 07:06:33.603] [info] [gcode.cpp:559] [1969] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 07:06:33.605] [info] [homing_override.cpp:395] [1969] manual_move z start +[2026-05-03 07:06:33.605] [info] [homing_override.cpp:397] [1969] manual_move z over +[2026-05-03 07:06:33.606] [info] [homing_override.cpp:418] [1969] prev_G28 z start +[2026-05-03 07:06:33.637] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 316.5 +[2026-05-03 07:06:33.637] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -211.5 +[2026-05-03 07:06:33.638] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 383.714709 +[2026-05-03 07:06:34.947] [info] [mcu.cpp:712] [1969] set_digital pin PE12 132.9269423531253 158.187609616 +[2026-05-03 07:06:35.060] [error] [tmc.cpp:359] [1969] TMC stepper_z reports GSTAT: 10000000 reset=1(Reset) +[2026-05-03 07:06:37.723] [info] [clocksync.cpp:199] [2018] mcu 'mcu': New minimum RTT: sent_time=160.963475326,half_rtt=8.895850000101291e-05,freq=23999999.284464974 +[2026-05-03 07:06:39.545] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:06:39.558] [info] [mcu.cpp:634] [1969] home_wait pin_value:1 next_clock:3296530616 +[2026-05-03 07:06:39.558] [info] [homing.cpp:266] [1969] endstop_name z tt 137.35519233333332 trigger_time 137.35519233333332 move_end_print_time 137.60791775 +[2026-05-03 07:06:39.559] [info] [homing.cpp:309] [1969] stepper_name stepper_z over_steps 0 halt_pos -17613 start_pos 0 trig_pos -17613 +[2026-05-03 07:06:39.561] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 316.5 +[2026-05-03 07:06:39.561] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -211.5 +[2026-05-03 07:06:39.561] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 10.570582 +[2026-05-03 07:06:40.692] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:06:40.705] [info] [mcu.cpp:634] [1969] home_wait pin_value:1 next_clock:3324075504 +[2026-05-03 07:06:40.706] [info] [homing.cpp:266] [1969] endstop_name z tt 138.502646 trigger_time 138.502646 move_end_print_time 138.75432875 +[2026-05-03 07:06:40.706] [info] [homing.cpp:309] [1969] stepper_name stepper_z over_steps 0 halt_pos -17614 start_pos -16813 trig_pos -17614 +[2026-05-03 07:06:40.708] [info] [z_compensation.cpp:264] [1969] ZCompensation handle_home_rails_end +[2026-05-03 07:06:40.708] [info] [z_compensation.cpp:92] [1969] use_fix_ref_temperature true fix_ref_temperature 140 ref_temperature 140.66734983171077 +[2026-05-03 07:06:40.709] [info] [gcode.cpp:544] [1969] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 07:06:40.710] [info] [homing_override.cpp:420] [1969] prev_G28 z over +[2026-05-03 07:06:40.710] [info] [homing_override.cpp:422] [1969] manual_move z start +[2026-05-03 07:06:40.710] [info] [homing_override.cpp:434] [1969] manual_move z over +[2026-05-03 07:06:40.711] [info] [device_status.cpp:832] [1969] M2202 result_code:2802 +[2026-05-03 07:06:40.713] [info] [gcode.cpp:801] [1969] cmd_M2202 res.dump:{"command":"M2202","result":"2901"} +[2026-05-03 07:06:40.713] [info] [device_status.cpp:832] [1969] M2202 result_code:2901 +[2026-05-03 07:06:40.715] [info] [gcode_move.cpp:52] [1969] G180 select 1 +[2026-05-03 07:06:40.716] [info] [homing_override.cpp:238] [1969] need true true false homed true true true +[2026-05-03 07:06:40.716] [info] [device_status.cpp:832] [1969] M2202 result_code:1045 +[2026-05-03 07:06:40.718] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:06:40.718] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:06:40.718] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:06:40.720] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:06:40.720] [info] [extruder.cpp:501] [1969] cmd_M104 temp 200 index -1 wait true +[2026-05-03 07:06:40.720] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:200,wait:true +[2026-05-03 07:06:40.783] [info] [verify_heater.cpp:164] [1969] Heater extruder approaching new target of 200 +[2026-05-03 07:06:45.601] [info] [clocksync.cpp:199] [2026] mcu 'toolhead': New minimum RTT: sent_time=168.840399913,half_rtt=0.00025116700000182846,freq=119998343.37229538 +[2026-05-03 07:06:56.793] [info] [verify_heater.cpp:140] [1969] Heater extruder within range of 200 +[2026-05-03 07:07:03.734] [info] [device_status.cpp:832] [1969] M2202 result_code:1066 +[2026-05-03 07:07:03.736] [info] [heaters.cpp:1198] [1969] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 200 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 07:07:03.737] [info] [device_status.cpp:832] [1969] M2202 result_code:1045 +[2026-05-03 07:07:03.738] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:07:03.738] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:07:03.738] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:07:03.739] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:07:03.739] [info] [extruder.cpp:501] [1969] cmd_M104 temp 180 index -1 wait true +[2026-05-03 07:07:03.739] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:180,wait:true +[2026-05-03 07:07:12.180] [info] [clocksync.cpp:199] [2018] mcu 'mcu': New minimum RTT: sent_time=195.420136926,half_rtt=8.483349999721668e-05,freq=24000000.82196425 +[2026-05-03 07:07:12.182] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:07:25.755] [info] [device_status.cpp:832] [1969] M2202 result_code:1066 +[2026-05-03 07:07:25.757] [info] [heaters.cpp:1198] [1969] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 180 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 07:07:25.757] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:07:25.758] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:07:25.758] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:07:25.758] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:07:25.758] [info] [extruder.cpp:501] [1969] cmd_M104 temp 140 index -1 wait false +[2026-05-03 07:07:25.758] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:140,wait:false +[2026-05-03 07:07:25.759] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.031037966367635998 +[2026-05-03 07:07:25.762] [info] [gcode_move.cpp:52] [1969] G180 select 2 +[2026-05-03 07:07:25.764] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:07:25.764] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:07:25.764] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:07:25.764] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:07:25.765] [info] [extruder.cpp:501] [1969] cmd_M104 temp 140 index -1 wait false +[2026-05-03 07:07:25.765] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:140,wait:false +[2026-05-03 07:07:25.766] [info] [bed_mesh.cpp:463] [1969] update_status bed_mesh_exist:0x0100 +[2026-05-03 07:07:25.767] [info] [print_stats.cpp:277] [1969] bed_mesh_exist:0x0100 +[2026-05-03 07:07:25.769] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:07:25.770] [info] [gcode_move.cpp:52] [1969] G180 select 915 +[2026-05-03 07:07:25.772] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:25.802] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:25.822] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:25.884] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:25.946] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:26.008] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:26.071] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:26.134] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:26.196] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:26.258] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:26.320] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:26.382] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:26.446] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:26.508] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:26.570] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:26.633] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:26.694] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:26.757] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:26.819] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:26.881] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:26.944] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:27.006] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:27.068] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:27.131] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:27.195] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:27.256] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:27.318] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:27.381] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:27.443] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:27.505] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:27.568] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:27.629] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:27.692] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:27.754] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:27.817] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:27.879] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:27.942] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:28.004] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:28.066] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:28.129] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:07:28.191] [info] [gcode_move.cpp:772] [1969] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 07:07:28.194] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: command_cs123x_write oid 7 config 124 +[2026-05-03 07:07:28.197] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: command_cs123x_read oid 7 config 124 +[2026-05-03 07:07:28.199] [info] [hx71x.cpp:246] [1969] sensor_type:cs1237 name:load_cell_probe rconfig:124 wconfig:124 retry:10 +[2026-05-03 07:07:30.343] [info] [load_cell_probe.cpp:866] [1969] pause_and_tare avg 37144.030303030304 std 4492.019291148672 retry 0 +[2026-05-03 07:07:30.855] [info] [load_cell_probe.cpp:866] [1969] pause_and_tare avg 37201.85 std 210.4157164491606 retry 1 +[2026-05-03 07:07:30.856] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 382.99902000017494 +[2026-05-03 07:07:30.856] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -126.99628000016091 +[2026-05-03 07:07:30.856] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 7.030581999999908 +[2026-05-03 07:07:32.578] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:07:32.579] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:07:32.593] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1204353087 trigger_emit_ticks=1204737486 +[2026-05-03 07:07:32.595] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1204353087 22679189567 trigger_emit_ticks 1204737486 22679573966 +[2026-05-03 07:07:32.596] [info] [homing.cpp:266] [1969] endstop_name probe tt 190.38774919601218 trigger_time 190.38774919601218 move_end_print_time 190.64145441666668 +[2026-05-03 07:07:32.596] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -2868 trig_steps -2864 start_pos -17430 trig_pos -20294 halt_pos -20298 +[2026-05-03 07:07:32.597] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.02752867701381303 +[2026-05-03 07:07:33.333] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 128.001370000007 254.99765000016794 0.08715322734720757 spos 0.08808199999991473 probing_z -0.12941800000009174 +[2026-05-03 07:07:33.333] [info] [gcode.cpp:559] [1969] probe at 128.001,254.998 is z=0.087153 +[2026-05-03 07:07:33.334] [info] [load_cell_probe.cpp:333] [1969] run_probe time 5.143244084999992 +[2026-05-03 07:07:33.335] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 382.99902000017494 +[2026-05-03 07:07:33.335] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -126.99628000016094 +[2026-05-03 07:07:33.335] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8605819999998958 +[2026-05-03 07:07:33.826] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:07:33.826] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:07:33.840] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1353914701 trigger_emit_ticks=1354299075 +[2026-05-03 07:07:33.843] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1353914701 22828751181 trigger_emit_ticks 1354299075 22829135555 +[2026-05-03 07:07:33.844] [info] [homing.cpp:266] [1969] endstop_name probe tt 191.63410907533583 trigger_time 191.63410907533583 move_end_print_time 191.88840479166666 +[2026-05-03 07:07:33.844] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -404 trig_steps -399 start_pos -19898 trig_pos -20297 halt_pos -20302 +[2026-05-03 07:07:34.775] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 128.001370000007 254.99765000016794 0.08152070437682693 spos 0.08058199999990023 probing_z -0.13691800000010423 +[2026-05-03 07:07:34.775] [info] [gcode.cpp:559] [1969] probe at 128.001,254.998 is z=0.081521 +[2026-05-03 07:07:34.776] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4417537500000037 +[2026-05-03 07:07:34.777] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 382.99902000017494 +[2026-05-03 07:07:34.777] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -126.99628000016094 +[2026-05-03 07:07:34.777] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8505819999998834 +[2026-05-03 07:07:35.263] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:07:35.265] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:07:35.278] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1526666079 trigger_emit_ticks=1527050455 +[2026-05-03 07:07:35.280] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1526666079 23001502559 trigger_emit_ticks 1527050455 23001886935 +[2026-05-03 07:07:35.281] [info] [homing.cpp:266] [1969] endstop_name probe tt 193.0737220574068 trigger_time 193.0737220574068 move_end_print_time 193.32550929166666 +[2026-05-03 07:07:35.281] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -395 trig_steps -394 start_pos -19902 trig_pos -20296 halt_pos -20297 +[2026-05-03 07:07:35.283] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.024426545082780884 +[2026-05-03 07:07:36.117] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 128.001370000007 254.99765000016794 0.08677907000693821 spos 0.08558199999988148 probing_z -0.1344180000001166 +[2026-05-03 07:07:36.118] [info] [gcode.cpp:559] [1969] probe at 128.001,254.998 is z=0.086779 +[2026-05-03 07:07:36.119] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.343370875000005 +[2026-05-03 07:07:36.121] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 382.99902000017494 +[2026-05-03 07:07:36.122] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -126.99628000016094 +[2026-05-03 07:07:36.122] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8630819999998706 +[2026-05-03 07:07:36.613] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:07:36.614] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:07:36.628] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1688694533 trigger_emit_ticks=1689069556 +[2026-05-03 07:07:36.630] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1688694533 23163531013 trigger_emit_ticks 1689069556 23163906036 +[2026-05-03 07:07:36.632] [info] [homing.cpp:266] [1969] endstop_name probe tt 194.42389919389308 trigger_time 194.42389919389308 move_end_print_time 194.67625516666666 +[2026-05-03 07:07:36.632] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -403 trig_steps -401 start_pos -19897 trig_pos -20298 halt_pos -20300 +[2026-05-03 07:07:37.468] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 128.001370000007 254.99765000016794 0.08409430488050088 spos 0.08308199999986954 probing_z -0.13941800000012938 +[2026-05-03 07:07:37.469] [info] [gcode.cpp:559] [1969] probe at 128.001,254.998 is z=0.084094 +[2026-05-03 07:07:37.470] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3501173340000037 +[2026-05-03 07:07:37.470] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 128.001370000007 254.99765000016794 0.0848868266528684 +[2026-05-03 07:07:37.471] [info] [gcode.cpp:559] [1969] Result is z=0.084887 +[2026-05-03 07:07:37.473] [info] [force_move.cpp:232] [1969] SET_KINEMATIC_POSITION pos=128.001370000007, 254.99765000016794, 0 clear= +[2026-05-03 07:07:39.465] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.021171882235740774 +[2026-05-03 07:07:40.190] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:07:42.667] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.01860733806203395 +[2026-05-03 07:07:46.364] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.01591377459025082 +[2026-05-03 07:07:49.259] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.013033738705601493 +[2026-05-03 07:07:52.114] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.010245413296859903 +[2026-05-03 07:07:55.972] [info] [device_status.cpp:832] [1969] M2202 result_code:1045 +[2026-05-03 07:07:55.973] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:07:55.973] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:07:55.973] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:07:55.974] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:07:55.974] [info] [extruder.cpp:501] [1969] cmd_M104 temp 140 index -1 wait true +[2026-05-03 07:07:55.974] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:140,wait:true +[2026-05-03 07:08:06.986] [info] [device_status.cpp:832] [1969] M2202 result_code:1066 +[2026-05-03 07:08:06.987] [info] [heaters.cpp:1198] [1969] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 07:08:06.988] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.0004187117796273041 +[2026-05-03 07:08:08.109] [info] [homing_override.cpp:238] [1969] need false false true homed true true true +[2026-05-03 07:08:08.110] [info] [device_status.cpp:832] [1969] M2202 result_code:2801 +[2026-05-03 07:08:08.111] [info] [homing_override.cpp:166] [1969] homing_ready axis z +[2026-05-03 07:08:09.355] [info] [homing_override.cpp:175] [1969] homing_ready #2: endstop name z state false +[2026-05-03 07:08:09.355] [info] [homing_override.cpp:395] [1969] manual_move z start +[2026-05-03 07:08:09.355] [info] [homing_override.cpp:397] [1969] manual_move z over +[2026-05-03 07:08:09.355] [info] [homing_override.cpp:418] [1969] prev_G28 z start +[2026-05-03 07:08:09.370] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 316.5 +[2026-05-03 07:08:09.370] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -211.5 +[2026-05-03 07:08:09.370] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 383.714709 +[2026-05-03 07:08:10.743] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:10.755] [info] [mcu.cpp:634] [1969] home_wait pin_value:1 next_clock:5485297784 +[2026-05-03 07:08:10.756] [info] [homing.cpp:266] [1969] endstop_name z tt 228.55382433333332 trigger_time 228.55382433333332 move_end_print_time 228.80549783333333 +[2026-05-03 07:08:10.756] [info] [homing.cpp:309] [1969] stepper_name stepper_z over_steps 0 halt_pos -17607 start_pos -16232 trig_pos -17607 +[2026-05-03 07:08:10.758] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 316.5 +[2026-05-03 07:08:10.758] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -211.5 +[2026-05-03 07:08:10.758] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 10.570582 +[2026-05-03 07:08:11.889] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:11.902] [info] [mcu.cpp:634] [1969] home_wait pin_value:1 next_clock:5512802674 +[2026-05-03 07:08:11.902] [info] [homing.cpp:266] [1969] endstop_name z tt 229.69961141666667 trigger_time 229.69961141666667 move_end_print_time 229.953199625 +[2026-05-03 07:08:11.902] [info] [homing.cpp:309] [1969] stepper_name stepper_z over_steps 0 halt_pos -17606 start_pos -16807 trig_pos -17606 +[2026-05-03 07:08:11.903] [info] [z_compensation.cpp:264] [1969] ZCompensation handle_home_rails_end +[2026-05-03 07:08:11.904] [info] [z_compensation.cpp:92] [1969] use_fix_ref_temperature true fix_ref_temperature 140 ref_temperature 139.69725965770365 +[2026-05-03 07:08:11.904] [info] [gcode.cpp:544] [1969] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 07:08:11.904] [info] [homing_override.cpp:420] [1969] prev_G28 z over +[2026-05-03 07:08:11.905] [info] [homing_override.cpp:422] [1969] manual_move z start +[2026-05-03 07:08:11.905] [info] [homing_override.cpp:434] [1969] manual_move z over +[2026-05-03 07:08:11.905] [info] [device_status.cpp:832] [1969] M2202 result_code:2802 +[2026-05-03 07:08:11.907] [info] [gcode_move.cpp:52] [1969] G180 select 915 +[2026-05-03 07:08:11.908] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.910] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.912] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.913] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.915] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.917] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.918] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.920] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.922] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.924] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.926] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.927] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.929] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.931] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.932] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.934] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.935] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.937] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.938] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.940] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.941] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.943] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.944] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:11.959] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:12.022] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:12.084] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:12.146] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:12.208] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:12.271] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:12.333] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:12.395] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:12.458] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:12.521] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:12.583] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:12.645] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:12.708] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:12.770] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:12.832] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:12.894] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:12.956] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:15.031] [info] [device_status.cpp:832] [1969] M2202 result_code:1045 +[2026-05-03 07:08:15.033] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:08:15.033] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:08:15.033] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:08:15.034] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:08:15.034] [info] [extruder.cpp:501] [1969] cmd_M104 temp 140 index -1 wait true +[2026-05-03 07:08:15.034] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:140,wait:true +[2026-05-03 07:08:16.035] [info] [device_status.cpp:832] [1969] M2202 result_code:1066 +[2026-05-03 07:08:16.038] [info] [heaters.cpp:1198] [1969] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 07:08:16.039] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:08:16.042] [info] [probe.cpp:857] [1969] _move_next 0 probe_points.size 49 + +[2026-05-03 07:08:16.999] [info] [load_cell_probe.cpp:866] [1969] pause_and_tare avg 40200.03296703297 std 323.8970498493293 retry 0 +[2026-05-03 07:08:17.000] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 94.99858000007652 +[2026-05-03 07:08:17.000] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -25.322680000129168 +[2026-05-03 07:08:17.000] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000000355 +[2026-05-03 07:08:17.905] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:17.906] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:17.921] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2348584799 trigger_emit_ticks=2348969198 +[2026-05-03 07:08:17.923] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2348584799 28118388575 trigger_emit_ticks 2348969198 28118772974 +[2026-05-03 07:08:17.923] [info] [homing.cpp:266] [1969] endstop_name probe tt 235.71508367770977 trigger_time 235.71508367770977 move_end_print_time 235.97508162500023 +[2026-05-03 07:08:17.923] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1239 trig_steps -1235 start_pos -19034 trig_pos -20269 halt_pos -20273 +[2026-05-03 07:08:18.651] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.837949999973674 60.16063000010284 0.06525193030389523 spos 0.06558200000035441 probing_z -0.086917999999645 +[2026-05-03 07:08:18.652] [info] [gcode.cpp:559] [1969] probe at 34.838,60.161 is z=0.065252 +[2026-05-03 07:08:18.655] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.6110026260000154 +[2026-05-03 07:08:18.656] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 94.99858000007652 +[2026-05-03 07:08:18.656] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -25.322680000129168 +[2026-05-03 07:08:18.656] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.9030820000003411 +[2026-05-03 07:08:19.144] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:19.145] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:19.164] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2497375467 trigger_emit_ticks=2497759843 +[2026-05-03 07:08:19.166] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2497375467 28267179243 trigger_emit_ticks 2497759843 28267563619 +[2026-05-03 07:08:19.167] [info] [homing.cpp:266] [1969] endstop_name probe tt 236.9550235661326 trigger_time 236.9550235661326 move_end_print_time 237.20764641666668 +[2026-05-03 07:08:19.167] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -19873 trig_pos -20272 halt_pos -20273 +[2026-05-03 07:08:19.995] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.837949999973674 60.16063000010284 0.06341062733697247 spos 0.06308200000034248 probing_z -0.09441799999965894 +[2026-05-03 07:08:19.996] [info] [gcode.cpp:559] [1969] probe at 34.838,60.161 is z=0.063411 +[2026-05-03 07:08:19.997] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3417697090000047 +[2026-05-03 07:08:19.998] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 94.99858000007652 +[2026-05-03 07:08:19.998] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -25.322680000129168 +[2026-05-03 07:08:19.998] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.9030820000003275 +[2026-05-03 07:08:20.501] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:20.507] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:20.530] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2660238993 trigger_emit_ticks=2660623367 +[2026-05-03 07:08:20.532] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2660238993 28430042769 trigger_emit_ticks 2660623367 28430427143 +[2026-05-03 07:08:20.533] [info] [homing.cpp:266] [1969] endstop_name probe tt 238.31223961514144 trigger_time 238.31223961514144 move_end_print_time 238.57686854166667 +[2026-05-03 07:08:20.533] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -19873 trig_pos -20272 halt_pos -20273 +[2026-05-03 07:08:21.462] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.837949999973674 60.16063000010284 0.0664744151711665 spos 0.06558200000032599 probing_z -0.0944179999996726 +[2026-05-03 07:08:21.462] [info] [gcode.cpp:559] [1969] probe at 34.838,60.161 is z=0.066474 +[2026-05-03 07:08:21.463] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4665423339999961 +[2026-05-03 07:08:21.463] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 34.837949999973674 60.160630000102834 0.0650456576040114 +[2026-05-03 07:08:21.464] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:08:21.465] [info] [probe.cpp:857] [1969] _move_next 1 probe_points.size 49 + +[2026-05-03 07:08:21.473] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 120.3920600000854 +[2026-05-03 07:08:21.473] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 0.05833999986952702 +[2026-05-03 07:08:21.474] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000000447 +[2026-05-03 07:08:22.103] [info] [clocksync.cpp:199] [2024] mcu 'bed_sensor': New minimum RTT: sent_time=265.343844418,half_rtt=0.00016783299997769063,freq=119998214.27723674 +[2026-05-03 07:08:22.466] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:240.27800000038,last_temp:60.42406948698573,temp:60.42406948698573,target_temp:60,smoothed_temp:60.44453716893717 +[2026-05-03 07:08:22.689] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:22.690] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:22.706] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2922646867 trigger_emit_ticks=2923031243 +[2026-05-03 07:08:22.708] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2922646867 28692450643 trigger_emit_ticks 2923031243 28692835019 +[2026-05-03 07:08:22.709] [info] [homing.cpp:266] [1969] endstop_name probe tt 240.49900382095976 trigger_time 240.49900382095976 move_end_print_time 240.75605895833334 +[2026-05-03 07:08:22.710] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1247 trig_steps -1243 start_pos -19034 trig_pos -20277 halt_pos -20281 +[2026-05-03 07:08:23.440] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.22519999997746 60.16686000010793 0.042297545858314606 spos 0.04308200000044593 probing_z -0.10691799999955309 +[2026-05-03 07:08:23.441] [info] [gcode.cpp:559] [1969] probe at 60.225,60.167 is z=0.042298 +[2026-05-03 07:08:23.442] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.9762783339999714 +[2026-05-03 07:08:23.443] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 120.3920600000854 +[2026-05-03 07:08:23.443] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 0.05833999986953131 +[2026-05-03 07:08:23.443] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8830820000004335 +[2026-05-03 07:08:23.931] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:23.932] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:23.947] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3071915361 trigger_emit_ticks=3072290361 +[2026-05-03 07:08:23.948] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3071915361 28841719137 trigger_emit_ticks 3072290361 28842094137 +[2026-05-03 07:08:23.949] [info] [homing.cpp:266] [1969] endstop_name probe tt 241.74284804794212 trigger_time 241.74284804794212 move_end_print_time 241.99505879166668 +[2026-05-03 07:08:23.949] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -19881 trig_pos -20280 halt_pos -20281 +[2026-05-03 07:08:24.790] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.22519999997746 60.16686000010793 0.0399133157663957 spos 0.04058200000043399 probing_z -0.11441799999956659 +[2026-05-03 07:08:24.790] [info] [gcode.cpp:559] [1969] probe at 60.225,60.167 is z=0.039913 +[2026-05-03 07:08:24.791] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3497908749999965 +[2026-05-03 07:08:24.793] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 120.3920600000854 +[2026-05-03 07:08:24.793] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 0.05833999986953131 +[2026-05-03 07:08:24.793] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8830820000004203 +[2026-05-03 07:08:25.056] [info] [clocksync.cpp:199] [2024] mcu 'bed_sensor': New minimum RTT: sent_time=268.29715487699997,half_rtt=0.00016237500000215732,freq=119998209.25344692 +[2026-05-03 07:08:25.280] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:25.280] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:25.295] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3233730375 trigger_emit_ticks=3234114751 +[2026-05-03 07:08:25.297] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3233730375 29003534151 trigger_emit_ticks 3234114751 29003918527 +[2026-05-03 07:08:25.298] [info] [homing.cpp:266] [1969] endstop_name probe tt 243.0914043264253 trigger_time 243.0914043264253 move_end_print_time 243.34389104166667 +[2026-05-03 07:08:25.298] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -399 trig_steps -398 start_pos -19881 trig_pos -20279 halt_pos -20280 +[2026-05-03 07:08:26.140] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.22519999997746 60.16686000010793 0.04209939086503381 spos 0.04308200000041751 probing_z -0.11191799999957974 +[2026-05-03 07:08:26.141] [info] [gcode.cpp:559] [1969] probe at 60.225,60.167 is z=0.042099 +[2026-05-03 07:08:26.142] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3501017499999648 +[2026-05-03 07:08:26.142] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 60.22519999997746 60.16686000010793 0.04143675082991471 +[2026-05-03 07:08:26.142] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:08:26.143] [info] [probe.cpp:857] [1969] _move_next 2 probe_points.size 49 + +[2026-05-03 07:08:26.153] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 145.78554000005371 +[2026-05-03 07:08:26.153] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 25.451819999868196 +[2026-05-03 07:08:26.153] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000005397 +[2026-05-03 07:08:27.373] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:27.374] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:27.387] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3484826983 trigger_emit_ticks=3485211357 +[2026-05-03 07:08:27.389] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3484826983 29254630759 trigger_emit_ticks 3485211357 29255015133 +[2026-05-03 07:08:27.390] [info] [homing.cpp:266] [1969] endstop_name probe tt 245.1839058705722 trigger_time 245.1839058705722 move_end_print_time 245.43613495833333 +[2026-05-03 07:08:27.390] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1255 trig_steps -1254 start_pos -19034 trig_pos -20288 halt_pos -20289 +[2026-05-03 07:08:28.119] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61867999996096 60.16686000009276 0.02288687565894068 spos 0.02308200000054228 probing_z -0.13441799999946058 +[2026-05-03 07:08:28.120] [info] [gcode.cpp:559] [1969] probe at 85.619,60.167 is z=0.022887 +[2026-05-03 07:08:28.121] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.9772641679999765 +[2026-05-03 07:08:28.122] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 145.78554000005371 +[2026-05-03 07:08:28.122] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 25.4518199998682 +[2026-05-03 07:08:28.122] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8630820000005267 +[2026-05-03 07:08:28.610] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:246.421371121389,last_temp:140.87834362947575,temp:140.87834362947575,target_temp:140,smoothed_temp:141.0196326015575 +[2026-05-03 07:08:28.613] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:28.630] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3633517939 trigger_emit_ticks=3633902313 +[2026-05-03 07:08:28.632] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3633517939 29403321715 trigger_emit_ticks 3633902313 29403706089 +[2026-05-03 07:08:28.634] [info] [homing.cpp:266] [1969] endstop_name probe tt 246.42301455555184 trigger_time 246.42301455555184 move_end_print_time 246.676602 +[2026-05-03 07:08:28.634] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -404 trig_steps -400 start_pos -19889 trig_pos -20289 halt_pos -20293 +[2026-05-03 07:08:28.996] [info] [clocksync.cpp:199] [2026] mcu 'toolhead': New minimum RTT: sent_time=272.236329338,half_rtt=0.0002464579999639227,freq=119998320.03801645 +[2026-05-03 07:08:29.464] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61867999996096 60.166860000092754 0.019415377197680966 spos 0.020582000000530343 probing_z -0.1369179999994733 +[2026-05-03 07:08:29.465] [info] [gcode.cpp:559] [1969] probe at 85.619,60.167 is z=0.019415 +[2026-05-03 07:08:29.467] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3455253750000224 +[2026-05-03 07:08:29.468] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 145.78554000005371 +[2026-05-03 07:08:29.468] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 25.451819999868206 +[2026-05-03 07:08:29.468] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8530820000005142 +[2026-05-03 07:08:29.956] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:29.956] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:29.971] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3794765019 trigger_emit_ticks=3795149393 +[2026-05-03 07:08:29.973] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3794765019 29564568795 trigger_emit_ticks 3795149393 29564953169 +[2026-05-03 07:08:29.973] [info] [homing.cpp:266] [1969] endstop_name probe tt 247.7667599290487 trigger_time 247.7667599290487 move_end_print_time 248.01886754166668 +[2026-05-03 07:08:29.974] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -398 trig_steps -397 start_pos -19893 trig_pos -20290 halt_pos -20291 +[2026-05-03 07:08:30.903] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61867999996096 60.166860000092754 0.020454404941345677 spos 0.020582000000516132 probing_z -0.1394179999994859 +[2026-05-03 07:08:30.903] [info] [gcode.cpp:559] [1969] probe at 85.619,60.167 is z=0.020454 +[2026-05-03 07:08:30.905] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4378217089999907 +[2026-05-03 07:08:30.905] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 85.61867999996097 60.166860000092754 0.020918885932655774 +[2026-05-03 07:08:30.905] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:08:30.906] [info] [probe.cpp:857] [1969] _move_next 3 probe_points.size 49 + +[2026-05-03 07:08:30.914] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 171.1665600000047 +[2026-05-03 07:08:30.915] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 50.84529999987335 +[2026-05-03 07:08:30.915] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000000634 +[2026-05-03 07:08:32.141] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:32.155] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4056987817 trigger_emit_ticks=4057362817 +[2026-05-03 07:08:32.157] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 4056987817 29826791593 trigger_emit_ticks 4057362817 29827166593 +[2026-05-03 07:08:32.158] [info] [homing.cpp:266] [1969] endstop_name probe tt 249.95190444005374 trigger_time 249.95190444005374 move_end_print_time 250.20438154166666 +[2026-05-03 07:08:32.159] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1263 trig_steps -1261 start_pos -19034 trig_pos -20295 halt_pos -20297 +[2026-05-03 07:08:32.885] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.00592999993901 60.16063000006567 0.00859996540798627 spos 0.008082000000634082 probing_z -0.15191799999936606 +[2026-05-03 07:08:32.886] [info] [gcode.cpp:559] [1969] probe at 111.006,60.161 is z=0.008600 +[2026-05-03 07:08:32.887] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.9804575850000106 +[2026-05-03 07:08:32.889] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 171.16656000000467 +[2026-05-03 07:08:32.889] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 50.84529999987335 +[2026-05-03 07:08:32.889] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8430820000006213 +[2026-05-03 07:08:33.380] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:33.380] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:33.395] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4205678751 trigger_emit_ticks=4206053751 +[2026-05-03 07:08:33.397] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 4205678751 29975482527 trigger_emit_ticks 4206053751 29975857527 +[2026-05-03 07:08:33.398] [info] [homing.cpp:266] [1969] endstop_name probe tt 251.191009598013 trigger_time 251.191009598013 move_end_print_time 251.44364470833332 +[2026-05-03 07:08:33.398] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -405 trig_steps -403 start_pos -19897 trig_pos -20300 halt_pos -20302 +[2026-05-03 07:08:34.330] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.00592999993901 60.16063000006566 0.0018022444489486367 spos 0.0005820000006195869 probing_z -0.16441799999937878 +[2026-05-03 07:08:34.331] [info] [gcode.cpp:559] [1969] probe at 111.006,60.161 is z=0.001802 +[2026-05-03 07:08:34.332] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4447886259999905 +[2026-05-03 07:08:34.333] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 171.16656000000467 +[2026-05-03 07:08:34.333] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 50.845299999873355 +[2026-05-03 07:08:34.333] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8305820000006093 +[2026-05-03 07:08:34.821] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:34.822] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:34.837] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=83734391 trigger_emit_ticks=84118767 +[2026-05-03 07:08:34.839] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 83734391 30148505463 trigger_emit_ticks 84118767 30148889839 +[2026-05-03 07:08:34.840] [info] [homing.cpp:266] [1969] endstop_name probe tt 252.6329635296545 trigger_time 252.6329635296545 move_end_print_time 252.88454654166668 +[2026-05-03 07:08:34.840] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -396 trig_steps -395 start_pos -19902 trig_pos -20297 halt_pos -20298 +[2026-05-03 07:08:35.670] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.00592999993901 60.16063000006565 0.005917862554546766 spos 0.005582000000615039 probing_z -0.1569179999993907 +[2026-05-03 07:08:35.670] [info] [gcode.cpp:559] [1969] probe at 111.006,60.161 is z=0.005918 +[2026-05-03 07:08:35.671] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3390981670000315 +[2026-05-03 07:08:35.671] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 111.00592999993903 60.16063000006566 0.005440024137160558 +[2026-05-03 07:08:35.672] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:08:35.673] [info] [probe.cpp:857] [1969] _move_next 4 probe_points.size 49 + +[2026-05-03 07:08:35.682] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 196.56003999995562 +[2026-05-03 07:08:35.682] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 76.23877999988224 +[2026-05-03 07:08:35.682] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000000729 +[2026-05-03 07:08:36.911] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:36.911] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:36.925] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=334456087 trigger_emit_ticks=334840461 +[2026-05-03 07:08:36.930] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 334456087 30399227159 trigger_emit_ticks 334840461 30399611533 +[2026-05-03 07:08:36.931] [info] [homing.cpp:266] [1969] endstop_name probe tt 254.72233903832043 trigger_time 254.72233903832043 move_end_print_time 254.97416433333333 +[2026-05-03 07:08:36.931] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1268 trig_steps -1267 start_pos -19034 trig_pos -20301 halt_pos -20302 +[2026-05-03 07:08:37.662] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39940999991893 60.16063000003669 -0.008142033697776413 spos -0.0069179999992670105 probing_z -0.16691799999927115 +[2026-05-03 07:08:37.663] [info] [gcode.cpp:559] [1969] probe at 136.399,60.161 is z=-0.008142 +[2026-05-03 07:08:37.663] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.9898923760000002 +[2026-05-03 07:08:37.665] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 196.56003999995562 +[2026-05-03 07:08:37.665] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 76.23877999988224 +[2026-05-03 07:08:37.665] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8305820000007169 +[2026-05-03 07:08:38.156] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:38.157] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:38.174] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=483913127 trigger_emit_ticks=484297503 +[2026-05-03 07:08:38.176] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 483913127 30548684199 trigger_emit_ticks 484297503 30549068575 +[2026-05-03 07:08:38.178] [info] [homing.cpp:266] [1969] endstop_name probe tt 255.96783209732345 trigger_time 255.96783209732345 move_end_print_time 256.220233375 +[2026-05-03 07:08:38.178] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -406 trig_steps -404 start_pos -19902 trig_pos -20306 halt_pos -20308 +[2026-05-03 07:08:39.110] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39940999991893 60.16063000003669 -0.01252721313137159 spos -0.01191799999928378 probing_z -0.1794179999992831 +[2026-05-03 07:08:39.110] [info] [gcode.cpp:559] [1969] probe at 136.399,60.161 is z=-0.012527 +[2026-05-03 07:08:39.111] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.447707250999997 +[2026-05-03 07:08:39.112] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 196.56003999995562 +[2026-05-03 07:08:39.112] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 76.23877999988224 +[2026-05-03 07:08:39.113] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8155820000007051 +[2026-05-03 07:08:39.601] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:39.602] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:39.618] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=657222551 trigger_emit_ticks=657597551 +[2026-05-03 07:08:39.621] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 657222551 30721993623 trigger_emit_ticks 657597551 30722368623 +[2026-05-03 07:08:39.622] [info] [homing.cpp:266] [1969] endstop_name probe tt 257.41201963019165 trigger_time 257.41201963019165 move_end_print_time 257.6653338333333 +[2026-05-03 07:08:39.623] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -400 trig_steps -398 start_pos -19908 trig_pos -20306 halt_pos -20308 +[2026-05-03 07:08:40.564] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39940999991893 60.16063000003669 -0.013115417944922297 spos -0.01191799999929799 probing_z -0.17941799999929486 +[2026-05-03 07:08:40.564] [info] [gcode.cpp:559] [1969] probe at 136.399,60.161 is z=-0.013115 +[2026-05-03 07:08:40.566] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4542824590000123 +[2026-05-03 07:08:40.566] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 136.39940999991893 60.16063000003669 -0.0112615549246901 +[2026-05-03 07:08:40.566] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:08:40.567] [info] [probe.cpp:857] [1969] _move_next 5 probe_points.size 49 + +[2026-05-03 07:08:40.576] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 221.95351999990658 +[2026-05-03 07:08:40.577] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 101.61979999989111 +[2026-05-03 07:08:40.577] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000008248 +[2026-05-03 07:08:41.809] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:41.810] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:41.827] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=922208855 trigger_emit_ticks=922593231 +[2026-05-03 07:08:41.840] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=922208855 trigger_emit_ticks=922593231 +[2026-05-03 07:08:41.842] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 922208855 30986979927 trigger_emit_ticks 922593231 30987364303 +[2026-05-03 07:08:41.843] [info] [homing.cpp:266] [1969] endstop_name probe tt 259.620348962252 trigger_time 259.620348962252 move_end_print_time 259.8724740833333 +[2026-05-03 07:08:41.843] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1273 trig_steps -1271 start_pos -19034 trig_pos -20305 halt_pos -20307 +[2026-05-03 07:08:42.726] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.78665999989886 60.16686000000773 -0.02125522440566116 spos -0.02191799999917521 probing_z -0.17691799999917546 +[2026-05-03 07:08:42.727] [info] [gcode.cpp:559] [1969] probe at 161.787,60.167 is z=-0.021255 +[2026-05-03 07:08:42.728] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.159746210000037 +[2026-05-03 07:08:42.729] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 221.95351999990658 +[2026-05-03 07:08:42.729] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 101.61979999989113 +[2026-05-03 07:08:42.729] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8180820000008129 +[2026-05-03 07:08:43.220] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:43.221] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:43.242] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1091493219 trigger_emit_ticks=1091877616 +[2026-05-03 07:08:43.244] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1091493219 31156264291 trigger_emit_ticks 1091877616 31156648688 +[2026-05-03 07:08:43.245] [info] [homing.cpp:266] [1969] endstop_name probe tt 261.03107242840105 trigger_time 261.03107242840105 move_end_print_time 261.284065 +[2026-05-03 07:08:43.245] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -404 trig_steps -401 start_pos -19907 trig_pos -20308 halt_pos -20311 +[2026-05-03 07:08:44.073] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.78665999989886 60.16686000000772 -0.021039491207123423 spos -0.021917999999182314 probing_z -0.18441799999918707 +[2026-05-03 07:08:44.074] [info] [gcode.cpp:559] [1969] probe at 161.787,60.167 is z=-0.021039 +[2026-05-03 07:08:44.075] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.347084834000043 +[2026-05-03 07:08:44.076] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:08:44.077] [info] [gcode_move.cpp:52] [1969] G180 select 915 +[2026-05-03 07:08:44.078] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.081] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.082] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.084] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.085] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.087] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.088] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.090] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.091] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.093] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.095] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.096] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.098] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.100] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.102] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.103] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.105] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.106] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.108] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.110] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.111] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.113] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.114] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.116] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.117] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.119] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.121] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.156] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.218] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.280] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.342] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.405] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.467] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.529] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.592] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.654] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.717] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.779] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.841] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.904] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:08:44.966] [info] [gcode_move.cpp:772] [1969] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 07:08:44.967] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 221.95351999990658 +[2026-05-03 07:08:44.968] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 101.61979999989114 +[2026-05-03 07:08:44.968] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 1.80808200000078 +[2026-05-03 07:08:47.415] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:47.416] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:47.429] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1594969447 trigger_emit_ticks=1595353821 +[2026-05-03 07:08:47.431] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1594969447 31659740519 trigger_emit_ticks 1595353821 31660124893 +[2026-05-03 07:08:47.432] [info] [homing.cpp:266] [1969] endstop_name probe tt 265.2267690791643 trigger_time 265.2267690791643 move_end_print_time 265.478532125 +[2026-05-03 07:08:47.433] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -794 trig_steps -793 start_pos -19511 trig_pos -20304 halt_pos -20305 +[2026-05-03 07:08:48.326] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.78665999989886 60.166860000007716 -0.021894473613423865 spos -0.02191799999921784 probing_z -0.17441799999922014 +[2026-05-03 07:08:48.326] [info] [gcode.cpp:559] [1969] probe at 161.787,60.167 is z=-0.021894 +[2026-05-03 07:08:48.327] [info] [load_cell_probe.cpp:333] [1969] run_probe time 3.3605502099999853 +[2026-05-03 07:08:48.327] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 161.78665999989886 60.16686000000772 -0.02139639640873615 +[2026-05-03 07:08:48.328] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:08:48.328] [info] [probe.cpp:857] [1969] _move_next 6 probe_points.size 49 + +[2026-05-03 07:08:48.337] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 247.33453999985755 +[2026-05-03 07:08:48.337] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 127.01327999990002 +[2026-05-03 07:08:48.337] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000008994 +[2026-05-03 07:08:49.562] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:49.585] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1852406125 trigger_emit_ticks=1852791029 +[2026-05-03 07:08:49.587] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1852406125 31917177197 trigger_emit_ticks 1852791029 31917562101 +[2026-05-03 07:08:49.589] [info] [homing.cpp:266] [1969] endstop_name probe tt 267.3721108807572 trigger_time 267.3721108807572 move_end_print_time 267.6258730416667 +[2026-05-03 07:08:49.589] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1255 trig_steps -1253 start_pos -19034 trig_pos -20287 halt_pos -20289 +[2026-05-03 07:08:50.322] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.1739099998788 60.16062999997877 0.006180005707951103 spos 0.005582000000906362 probing_z -0.13191799999910092 +[2026-05-03 07:08:50.323] [info] [gcode.cpp:559] [1969] probe at 187.174,60.161 is z=0.006180 +[2026-05-03 07:08:50.324] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.9943526679999763 +[2026-05-03 07:08:50.325] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 247.33453999985755 +[2026-05-03 07:08:50.325] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 127.01327999990002 +[2026-05-03 07:08:50.325] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8630820000008864 +[2026-05-03 07:08:50.656] [info] [clocksync.cpp:199] [2024] mcu 'bed_sensor': New minimum RTT: sent_time=293.89694193099996,half_rtt=0.00016077100002576117,freq=119998244.2914217 +[2026-05-03 07:08:50.817] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:50.817] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:50.831] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2003114449 trigger_emit_ticks=2003498823 +[2026-05-03 07:08:50.833] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2003114449 32067885521 trigger_emit_ticks 2003498823 32068269895 +[2026-05-03 07:08:50.834] [info] [homing.cpp:266] [1969] endstop_name probe tt 268.62802671299613 trigger_time 268.62802671299613 move_end_print_time 268.8803224166667 +[2026-05-03 07:08:50.834] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -405 trig_steps -403 start_pos -19889 trig_pos -20292 halt_pos -20294 +[2026-05-03 07:08:51.676] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.1739099998788 60.16062999997877 0.0054187356170362355 spos 0.005582000000885046 probing_z -0.14441799999911364 +[2026-05-03 07:08:51.677] [info] [gcode.cpp:559] [1969] probe at 187.174,60.161 is z=0.005419 +[2026-05-03 07:08:51.678] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3547694179999894 +[2026-05-03 07:08:51.680] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 247.33453999985755 +[2026-05-03 07:08:51.680] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 127.01327999990002 +[2026-05-03 07:08:51.680] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.850582000000874 +[2026-05-03 07:08:52.168] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:52.168] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:52.190] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2165229709 trigger_emit_ticks=2165614158 +[2026-05-03 07:08:52.193] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2165229709 32230000781 trigger_emit_ticks 2165614158 32230385230 +[2026-05-03 07:08:52.194] [info] [homing.cpp:266] [1969] endstop_name probe tt 269.9790075756071 trigger_time 269.9790075756071 move_end_print_time 270.2316769583333 +[2026-05-03 07:08:52.198] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -19894 trig_pos -20293 halt_pos -20294 +[2026-05-03 07:08:53.129] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.1739099998788 60.16062999997877 0.005032460827077673 spos 0.00558200000087794 probing_z -0.14691799999912603 +[2026-05-03 07:08:53.130] [info] [gcode.cpp:559] [1969] probe at 187.174,60.161 is z=0.005032 +[2026-05-03 07:08:53.131] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4519901259999983 +[2026-05-03 07:08:53.131] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 187.1739099998788 60.16062999997877 0.005543734050688337 +[2026-05-03 07:08:53.131] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:08:53.132] [info] [probe.cpp:857] [1969] _move_next 7 probe_points.size 49 + +[2026-05-03 07:08:53.141] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 272.46635999988416 +[2026-05-03 07:08:53.142] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 101.88145999989123 +[2026-05-03 07:08:53.142] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000009935 +[2026-05-03 07:08:54.381] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:54.396] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2430799068 trigger_emit_ticks=2431183442 +[2026-05-03 07:08:54.398] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2430799068 32495570140 trigger_emit_ticks 2431183442 32495954514 +[2026-05-03 07:08:54.399] [info] [homing.cpp:266] [1969] endstop_name probe tt 272.1921167054594 trigger_time 272.1921167054594 move_end_print_time 272.444915125 +[2026-05-03 07:08:54.399] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1291 trig_steps -1290 start_pos -19034 trig_pos -20324 halt_pos -20325 +[2026-05-03 07:08:55.338] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.1739099998877 85.29244999999646 -0.07206569965881912 spos -0.07191799999900184 probing_z -0.22441799999900658 +[2026-05-03 07:08:55.338] [info] [gcode.cpp:559] [1969] probe at 187.174,85.292 is z=-0.072066 +[2026-05-03 07:08:55.339] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.2063407509999706 +[2026-05-03 07:08:55.340] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 272.46635999988416 +[2026-05-03 07:08:55.341] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 101.88145999989126 +[2026-05-03 07:08:55.341] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7730820000009827 +[2026-05-03 07:08:55.833] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:55.849] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2605066461 trigger_emit_ticks=2605450835 +[2026-05-03 07:08:55.851] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2605066461 32669837533 trigger_emit_ticks 2605450835 32670221907 +[2026-05-03 07:08:55.852] [info] [homing.cpp:266] [1969] endstop_name probe tt 273.64436647872134 trigger_time 273.64436647872134 move_end_print_time 273.8965695416667 +[2026-05-03 07:08:55.852] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -405 trig_steps -404 start_pos -19925 trig_pos -20329 halt_pos -20330 +[2026-05-03 07:08:56.683] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.1739099998877 85.29244999999645 -0.07387029301738388 spos -0.07441799999902088 probing_z -0.2369179999990173 +[2026-05-03 07:08:56.684] [info] [gcode.cpp:559] [1969] probe at 187.174,85.292 is z=-0.073870 +[2026-05-03 07:08:56.684] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3449671260000287 +[2026-05-03 07:08:56.685] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 272.46635999988416 +[2026-05-03 07:08:56.686] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 101.88145999989126 +[2026-05-03 07:08:56.686] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7605820000009723 +[2026-05-03 07:08:57.171] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:08:57.172] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:08:57.190] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2765643111 trigger_emit_ticks=2766027487 +[2026-05-03 07:08:57.192] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2765643111 32830414183 trigger_emit_ticks 2766027487 32830798559 +[2026-05-03 07:08:57.193] [info] [homing.cpp:266] [1969] endstop_name probe tt 274.9825257213336 trigger_time 274.9825257213336 move_end_print_time 275.23485204166667 +[2026-05-03 07:08:57.193] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -401 trig_steps -399 start_pos -19930 trig_pos -20329 halt_pos -20331 +[2026-05-03 07:08:58.034] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.1739099998877 85.29244999999645 -0.07393748165387501 spos -0.07441799999902798 probing_z -0.23691799999902774 +[2026-05-03 07:08:58.035] [info] [gcode.cpp:559] [1969] probe at 187.174,85.292 is z=-0.073937 +[2026-05-03 07:08:58.036] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3512089590000187 +[2026-05-03 07:08:58.036] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 187.17390999988774 85.29244999999645 -0.073291158110026 +[2026-05-03 07:08:58.036] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:08:58.037] [info] [probe.cpp:857] [1969] _move_next 8 probe_points.size 49 + +[2026-05-03 07:08:58.045] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 247.08533999985806 +[2026-05-03 07:08:58.046] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 76.48797999988238 +[2026-05-03 07:08:58.046] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000001092 +[2026-05-03 07:08:59.059] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:4 is_failure:true +[2026-05-03 07:08:59.060] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:4 is_failure:true +[2026-05-03 07:08:59.140] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=2766027487 +[2026-05-03 07:08:59.154] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=2766027487 +[2026-05-03 07:08:59.156] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 34359738368 trigger_emit_ticks 2766027487 32830798559 +[2026-05-03 07:08:59.220] [info] [homing.cpp:266] [1969] endstop_name probe tt 277.15307566666667 trigger_time 0 move_end_print_time 277.15307566666667 +[2026-05-03 07:08:59.221] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -778 trig_steps -778 start_pos -19034 trig_pos -19812 halt_pos -19812 +[2026-05-03 07:08:59.222] [error] [homing.cpp:345] [1969] Error during homing probe: [error_code 803] CommandError: LOAD_CELL_ERROR_TIMEOUT +[2026-05-03 07:08:59.223] [error] [load_cell_probe.cpp:469] [1969] probing_move failed +[2026-05-03 07:08:59.224] [warning] [load_cell_probe.cpp:275] [1969] single_tap failed: [error_code 803] CommandError: Error during homing probe: [error_code 803] CommandError: LOAD_CELL_ERROR_TIMEOUT +[2026-05-03 07:08:59.224] [error] [load_cell_probe.cpp:312] [1969] retries 0 samples_retries 20 +[2026-05-03 07:08:59.225] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.187350084000002 +[2026-05-03 07:08:59.228] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 247.08533999985804 +[2026-05-03 07:08:59.229] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 76.48797999988237 +[2026-05-03 07:08:59.231] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 2.0555820000010807 +[2026-05-03 07:09:00.185] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:00.185] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:00.199] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3127220842 trigger_emit_ticks=3127605195 +[2026-05-03 07:09:00.201] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3127220842 33191991914 trigger_emit_ticks 3127605195 33192376267 +[2026-05-03 07:09:00.202] [info] [homing.cpp:266] [1969] endstop_name probe tt 277.9957188808663 trigger_time 277.9957188808663 move_end_print_time 278.24826675 +[2026-05-03 07:09:00.202] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -915 trig_steps -914 start_pos -19412 trig_pos -20326 halt_pos -20327 +[2026-05-03 07:09:01.094] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.7866599998702 85.29867999998783 -0.07468239112452577 spos -0.0744179999989214 probing_z -0.22941799999891943 +[2026-05-03 07:09:01.094] [info] [gcode.cpp:559] [1969] probe at 161.787,85.299 is z=-0.074682 +[2026-05-03 07:09:01.095] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.8695746260000305 +[2026-05-03 07:09:01.096] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 247.08533999985804 +[2026-05-03 07:09:01.096] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 76.48797999988238 +[2026-05-03 07:09:01.097] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.76808200000107 +[2026-05-03 07:09:01.484] [info] [clocksync.cpp:199] [2018] mcu 'mcu': New minimum RTT: sent_time=304.724753561,half_rtt=7.243749999474858e-05,freq=23999999.49615051 +[2026-05-03 07:09:01.587] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:01.588] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:01.603] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3295555881 trigger_emit_ticks=3295930904 +[2026-05-03 07:09:01.605] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3295555881 33360326953 trigger_emit_ticks 3295930904 33360701976 +[2026-05-03 07:09:01.607] [info] [homing.cpp:266] [1969] endstop_name probe tt 279.3984551873758 trigger_time 279.3984551873758 move_end_print_time 279.6513502916667 +[2026-05-03 07:09:01.607] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -405 trig_steps -403 start_pos -19927 trig_pos -20330 halt_pos -20332 +[2026-05-03 07:09:02.548] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.7866599998702 85.29867999998783 -0.07605661748123602 spos -0.07691799999893334 probing_z -0.2394179999989301 +[2026-05-03 07:09:02.549] [info] [gcode.cpp:559] [1969] probe at 161.787,85.299 is z=-0.076057 +[2026-05-03 07:09:02.550] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4544350840000106 +[2026-05-03 07:09:02.551] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 247.08533999985804 +[2026-05-03 07:09:02.551] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 76.48797999988238 +[2026-05-03 07:09:02.551] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7555820000010597 +[2026-05-03 07:09:03.040] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:03.058] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3469822961 trigger_emit_ticks=3470207335 +[2026-05-03 07:09:03.072] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3469822961 33534594033 trigger_emit_ticks 3470207335 33534978407 +[2026-05-03 07:09:03.073] [info] [homing.cpp:266] [1969] endstop_name probe tt 280.8507843926161 trigger_time 280.8507843926161 move_end_print_time 281.1031708333333 +[2026-05-03 07:09:03.074] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -401 trig_steps -400 start_pos -19932 trig_pos -20332 halt_pos -20333 +[2026-05-03 07:09:03.901] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.7866599998702 85.29867999998783 -0.07701273316110399 spos -0.07691799999894045 probing_z -0.24441799999894032 +[2026-05-03 07:09:03.902] [info] [gcode.cpp:559] [1969] probe at 161.787,85.299 is z=-0.077013 +[2026-05-03 07:09:03.902] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3524673759999928 +[2026-05-03 07:09:03.903] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 161.7866599998702 85.29867999998783 -0.07591724725562192 +[2026-05-03 07:09:03.903] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:09:03.904] [info] [probe.cpp:857] [1969] _move_next 9 probe_points.size 49 + +[2026-05-03 07:09:03.912] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 221.69185999990708 +[2026-05-03 07:09:03.912] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 51.10695999987351 +[2026-05-03 07:09:03.913] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000001179 +[2026-05-03 07:09:05.157] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:05.158] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:05.174] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3723905325 trigger_emit_ticks=3724289699 +[2026-05-03 07:09:05.176] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3723905325 33788676397 trigger_emit_ticks 3724289699 33789060771 +[2026-05-03 07:09:05.177] [info] [homing.cpp:266] [1969] endstop_name probe tt 282.9681731687698 trigger_time 282.9681731687698 move_end_print_time 283.22093966666665 +[2026-05-03 07:09:05.177] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1289 trig_steps -1288 start_pos -19034 trig_pos -20322 halt_pos -20323 +[2026-05-03 07:09:06.059] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39940999989028 85.29245000001679 -0.05426505989178218 spos -0.0544179999988188 probing_z -0.21941799999882106 +[2026-05-03 07:09:06.060] [info] [gcode.cpp:559] [1969] probe at 136.399,85.292 is z=-0.054265 +[2026-05-03 07:09:06.061] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.155895000999976 +[2026-05-03 07:09:06.062] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 221.69185999990705 +[2026-05-03 07:09:06.062] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 51.10695999987351 +[2026-05-03 07:09:06.062] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7780820000011681 +[2026-05-03 07:09:06.566] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:06.567] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:06.594] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3892904871 trigger_emit_ticks=3893289247 +[2026-05-03 07:09:06.596] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3892904871 33957675943 trigger_emit_ticks 3893289247 33958060319 +[2026-05-03 07:09:06.597] [info] [homing.cpp:266] [1969] endstop_name probe tt 284.37652573694373 trigger_time 284.37652573694373 move_end_print_time 284.6428823333333 +[2026-05-03 07:09:06.600] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -402 trig_steps -401 start_pos -19923 trig_pos -20324 halt_pos -20325 +[2026-05-03 07:09:07.528] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39940999989028 85.29245000001677 -0.0571898334869094 spos -0.05691799999883074 probing_z -0.22441799999883183 +[2026-05-03 07:09:07.529] [info] [gcode.cpp:559] [1969] probe at 136.399,85.292 is z=-0.057190 +[2026-05-03 07:09:07.530] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4695641669999873 +[2026-05-03 07:09:07.531] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 221.69185999990705 +[2026-05-03 07:09:07.531] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 51.10695999987351 +[2026-05-03 07:09:07.531] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7730820000011572 +[2026-05-03 07:09:08.022] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:08.023] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:08.037] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=4068135482 +[2026-05-03 07:09:08.038] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 34359738368 trigger_emit_ticks 4068135482 34132906554 +[2026-05-03 07:09:08.039] [info] [homing.cpp:266] [1969] endstop_name probe tt 285.8336010679004 trigger_time 285.8336010679004 move_end_print_time 286.0857075416667 +[2026-05-03 07:09:08.040] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -403 trig_steps -402 start_pos -19925 trig_pos -20327 halt_pos -20328 +[2026-05-03 07:09:08.870] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39940999989028 85.29245000001677 -0.06027997055936071 spos -0.059417999998842674 probing_z -0.23191799999884288 +[2026-05-03 07:09:08.871] [info] [gcode.cpp:559] [1969] probe at 136.399,85.292 is z=-0.060280 +[2026-05-03 07:09:08.872] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.341844626000011 +[2026-05-03 07:09:08.873] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 136.39940999989028 85.29245000001677 -0.05724495464601743 +[2026-05-03 07:09:08.873] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:09:08.874] [info] [probe.cpp:857] [1969] _move_next 10 probe_points.size 49 + +[2026-05-03 07:09:08.883] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 196.2983799999561 +[2026-05-03 07:09:08.883] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 25.71347999986822 +[2026-05-03 07:09:08.883] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000001277 +[2026-05-03 07:09:10.124] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:10.124] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:10.141] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=24954628 trigger_emit_ticks=25339038 +[2026-05-03 07:09:10.144] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 24954628 34384692996 trigger_emit_ticks 25339038 34385077406 +[2026-05-03 07:09:10.145] [info] [homing.cpp:266] [1969] endstop_name probe tt 287.93505640873343 trigger_time 287.93505640873343 move_end_print_time 288.18735625 +[2026-05-03 07:09:10.145] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1285 trig_steps -1284 start_pos -19034 trig_pos -20318 halt_pos -20319 +[2026-05-03 07:09:11.030] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.00592999991215 85.29245000004394 -0.04388806851839752 spos -0.04441799999872842 probing_z -0.20941799999872313 +[2026-05-03 07:09:11.031] [info] [gcode.cpp:559] [1969] probe at 111.006,85.292 is z=-0.043888 +[2026-05-03 07:09:11.031] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.157001667999964 +[2026-05-03 07:09:11.033] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 196.2983799999561 +[2026-05-03 07:09:11.033] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 25.713479999868213 +[2026-05-03 07:09:11.033] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7880820000012658 +[2026-05-03 07:09:11.526] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:11.540] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=193183621 trigger_emit_ticks=193567997 +[2026-05-03 07:09:11.542] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 193183621 34552921989 trigger_emit_ticks 193567997 34553306365 +[2026-05-03 07:09:11.543] [info] [homing.cpp:266] [1969] endstop_name probe tt 289.33698458271795 trigger_time 289.33698458271795 move_end_print_time 289.58894266666664 +[2026-05-03 07:09:11.544] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -409 trig_steps -408 start_pos -19919 trig_pos -20327 halt_pos -20328 +[2026-05-03 07:09:12.478] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.00592999991215 85.29245000004394 -0.054977045684227094 spos -0.054417999998733535 probing_z -0.2319179999987342 +[2026-05-03 07:09:12.479] [info] [gcode.cpp:559] [1969] probe at 111.006,85.292 is z=-0.054977 +[2026-05-03 07:09:12.479] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4478412089999892 +[2026-05-03 07:09:12.481] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 196.2983799999561 +[2026-05-03 07:09:12.481] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 25.713479999868213 +[2026-05-03 07:09:12.481] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7655820000012553 +[2026-05-03 07:09:12.972] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:12.990] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=366494229 trigger_emit_ticks=366878605 +[2026-05-03 07:09:12.991] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 366494229 34726232597 trigger_emit_ticks 366878605 34726616973 +[2026-05-03 07:09:12.993] [info] [homing.cpp:266] [1969] endstop_name probe tt 290.78126050591277 trigger_time 290.78126050591277 move_end_print_time 291.034658875 +[2026-05-03 07:09:12.993] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -405 trig_steps -401 start_pos -19928 trig_pos -20329 halt_pos -20333 +[2026-05-03 07:09:13.823] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.00592999991215 85.29245000004394 -0.056672173694816225 spos -0.05691799999873837 probing_z -0.23691799999874463 +[2026-05-03 07:09:13.824] [info] [gcode.cpp:559] [1969] probe at 111.006,85.292 is z=-0.056672 +[2026-05-03 07:09:13.825] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3452690000000302 +[2026-05-03 07:09:13.825] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 111.00592999991215 85.29245000004394 -0.05184576263248028 +[2026-05-03 07:09:13.825] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:09:13.826] [info] [probe.cpp:857] [1969] _move_next 11 probe_points.size 49 + +[2026-05-03 07:09:13.836] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 170.90490000000514 +[2026-05-03 07:09:13.837] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 0.31999999986960476 +[2026-05-03 07:09:13.837] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000001375 +[2026-05-03 07:09:15.075] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:15.075] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:15.101] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=618915669 trigger_emit_ticks=619300045 +[2026-05-03 07:09:15.106] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 618915669 34978654037 trigger_emit_ticks 619300045 34979038413 +[2026-05-03 07:09:15.107] [info] [homing.cpp:266] [1969] endstop_name probe tt 292.88480259826605 trigger_time 292.88480259826605 move_end_print_time 293.1380223333333 +[2026-05-03 07:09:15.107] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1281 trig_steps -1278 start_pos -19034 trig_pos -20312 halt_pos -20315 +[2026-05-03 07:09:15.273] [error] [tmc_uart.cpp:295] [1969] _decode_read error #0 +[2026-05-03 07:09:15.990] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61244999993737 85.29245000006777 -0.031847876314023055 spos -0.0319179999986261 probing_z -0.1944179999986253 +[2026-05-03 07:09:15.991] [info] [gcode.cpp:559] [1969] probe at 85.612,85.292 is z=-0.031848 +[2026-05-03 07:09:15.992] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.165175710000028 +[2026-05-03 07:09:15.993] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 170.9049000000051 +[2026-05-03 07:09:15.993] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 0.3199999998695944 +[2026-05-03 07:09:15.993] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7980820000013635 +[2026-05-03 07:09:16.485] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:16.484] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:16.499] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=788005059 trigger_emit_ticks=788389435 +[2026-05-03 07:09:16.501] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 788005059 35147743427 trigger_emit_ticks 788389435 35148127803 +[2026-05-03 07:09:16.503] [info] [homing.cpp:266] [1969] endstop_name probe tt 294.2939023188738 trigger_time 294.2939023188738 move_end_print_time 294.54796508333334 +[2026-05-03 07:09:16.503] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -405 trig_steps -402 start_pos -19915 trig_pos -20317 halt_pos -20320 +[2026-05-03 07:09:17.433] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61244999993735 85.29245000006776 -0.03807085803607843 spos -0.036917999998635764 probing_z -0.20691799999863658 +[2026-05-03 07:09:17.433] [info] [gcode.cpp:559] [1969] probe at 85.612,85.292 is z=-0.038071 +[2026-05-03 07:09:17.434] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4418645430000083 +[2026-05-03 07:09:17.435] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 170.9049000000051 +[2026-05-03 07:09:17.435] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 0.3199999998695944 +[2026-05-03 07:09:17.435] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7855820000013526 +[2026-05-03 07:09:17.922] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:17.925] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:17.939] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=960743212 trigger_emit_ticks=961127515 +[2026-05-03 07:09:17.941] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 960743212 35320481580 trigger_emit_ticks 961127515 35320865883 +[2026-05-03 07:09:17.942] [info] [homing.cpp:266] [1969] endstop_name probe tt 295.73340851612977 trigger_time 295.73340851612977 move_end_print_time 295.9856996666667 +[2026-05-03 07:09:17.942] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -399 trig_steps -396 start_pos -19920 trig_pos -20316 halt_pos -20319 +[2026-05-03 07:09:18.771] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61244999993735 85.29245000006776 -0.035108761768321756 spos -0.03441799999865225 probing_z -0.2044179999986474 +[2026-05-03 07:09:18.772] [info] [gcode.cpp:559] [1969] probe at 85.612,85.292 is z=-0.035109 +[2026-05-03 07:09:18.772] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3383352510000464 +[2026-05-03 07:09:18.773] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 85.61244999993737 85.29245000006776 -0.035009165372807745 +[2026-05-03 07:09:18.773] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:09:18.774] [info] [probe.cpp:857] [1969] _move_next 12 probe_points.size 49 + +[2026-05-03 07:09:18.783] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 145.52388000005413 +[2026-05-03 07:09:18.784] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -25.061020000129158 +[2026-05-03 07:09:18.784] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000014722 +[2026-05-03 07:09:20.012] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:20.012] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:20.027] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1211482235 trigger_emit_ticks=1211857235 +[2026-05-03 07:09:20.029] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1211482235 35571220603 trigger_emit_ticks 1211857235 35571595603 +[2026-05-03 07:09:20.031] [info] [homing.cpp:266] [1969] endstop_name probe tt 297.82285533546104 trigger_time 297.82285533546104 move_end_print_time 298.07482404166666 +[2026-05-03 07:09:20.031] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1261 trig_steps -1260 start_pos -19034 trig_pos -20294 halt_pos -20295 +[2026-05-03 07:09:20.772] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.23142999996249 85.29245000009165 0.008476696119866595 spos 0.008082000001479628 probing_z -0.14941799999852767 +[2026-05-03 07:09:20.773] [info] [gcode.cpp:559] [1969] probe at 60.231,85.292 is z=0.008477 +[2026-05-03 07:09:20.774] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.9995051680000415 +[2026-05-03 07:09:20.776] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:09:20.777] [info] [gcode_move.cpp:52] [1969] G180 select 915 +[2026-05-03 07:09:20.778] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.781] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.783] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.785] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.786] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.788] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.790] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.791] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.793] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.796] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.798] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.800] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.802] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.804] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.806] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.807] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.809] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.811] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.813] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.814] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.816] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.819] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.821] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.823] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.824] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.826] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.828] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.855] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.918] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:20.980] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:21.042] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:21.105] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:21.167] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:21.229] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:21.292] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:21.354] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:21.417] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:21.479] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:21.541] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:21.604] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:21.666] [info] [gcode_move.cpp:772] [1969] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 07:09:21.667] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 145.5238800000541 +[2026-05-03 07:09:21.668] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -25.061020000129155 +[2026-05-03 07:09:21.668] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 1.8480820000014386 +[2026-05-03 07:09:24.120] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:24.120] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:24.134] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1704411299 trigger_emit_ticks=1704795698 +[2026-05-03 07:09:24.136] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1704411299 36064149667 trigger_emit_ticks 1704795698 36064534066 +[2026-05-03 07:09:24.138] [info] [homing.cpp:266] [1969] endstop_name probe tt 301.9307394697539 trigger_time 301.9307394697539 move_end_print_time 302.18284804166666 +[2026-05-03 07:09:24.138] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -803 trig_steps -802 start_pos -19495 trig_pos -20297 halt_pos -20298 +[2026-05-03 07:09:25.078] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.23142999996247 85.29245000009163 0.0031833963200234294 spos 0.0030820000014415427 probing_z -0.15691799999856126 +[2026-05-03 07:09:25.078] [info] [gcode.cpp:559] [1969] probe at 60.231,85.292 is z=0.003183 +[2026-05-03 07:09:25.079] [info] [load_cell_probe.cpp:333] [1969] run_probe time 3.4127187099999787 +[2026-05-03 07:09:25.080] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 145.5238800000541 +[2026-05-03 07:09:25.080] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -25.06102000012917 +[2026-05-03 07:09:25.080] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8405820000014266 +[2026-05-03 07:09:25.573] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:25.574] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:25.591] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1878875053 trigger_emit_ticks=1879259429 +[2026-05-03 07:09:25.605] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1878875053 36238613421 trigger_emit_ticks 1879259429 36238997797 +[2026-05-03 07:09:25.606] [info] [homing.cpp:266] [1969] endstop_name probe tt 303.3846235798457 trigger_time 303.3846235798457 move_end_print_time 303.63691020833335 +[2026-05-03 07:09:25.607] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -407 trig_steps -406 start_pos -19898 trig_pos -20304 halt_pos -20305 +[2026-05-03 07:09:26.435] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.23142999996247 85.29245000009163 -0.00010579312655265016 spos 0.0005820000014296056 probing_z -0.17441799999857355 +[2026-05-03 07:09:26.435] [info] [gcode.cpp:559] [1969] probe at 60.231,85.292 is z=-0.000106 +[2026-05-03 07:09:26.436] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3570617089999928 +[2026-05-03 07:09:26.437] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 60.23142999996247 85.29245000009163 0.0038514331044457915 +[2026-05-03 07:09:26.437] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:09:26.438] [info] [probe.cpp:857] [1969] _move_next 13 probe_points.size 49 + +[2026-05-03 07:09:26.446] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 120.13040000008519 +[2026-05-03 07:09:26.446] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -50.45450000013409 +[2026-05-03 07:09:26.446] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000001546 +[2026-05-03 07:09:27.672] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:27.673] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:27.674] [info] [serialhdl.cpp:507] [2024] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 07:09:27.688] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2130661227 trigger_emit_ticks=2131045601 +[2026-05-03 07:09:27.690] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2130661227 36490399595 trigger_emit_ticks 2131045601 36490783969 +[2026-05-03 07:09:27.691] [info] [homing.cpp:266] [1969] endstop_name probe tt 305.48287055759084 trigger_time 305.48287055759084 move_end_print_time 305.73544025 +[2026-05-03 07:09:27.691] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1258 trig_steps -1257 start_pos -19034 trig_pos -20291 halt_pos -20292 +[2026-05-03 07:09:28.428] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.83794999997555 85.29245000010964 0.014704961675595679 spos 0.015582000001550966 probing_z -0.14191799999845411 +[2026-05-03 07:09:28.428] [info] [gcode.cpp:559] [1969] probe at 34.838,85.292 is z=0.014705 +[2026-05-03 07:09:28.430] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.9913018760000227 +[2026-05-03 07:09:28.431] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 120.13040000008517 +[2026-05-03 07:09:28.431] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -50.454500000134075 +[2026-05-03 07:09:28.431] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8555820000015334 +[2026-05-03 07:09:28.924] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:28.924] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:28.938] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2280881119 trigger_emit_ticks=2281265495 +[2026-05-03 07:09:28.940] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2280881119 36640619487 trigger_emit_ticks 2281265495 36641003863 +[2026-05-03 07:09:28.941] [info] [homing.cpp:266] [1969] endstop_name probe tt 306.73472023185724 trigger_time 306.73472023185724 move_end_print_time 306.9863677083333 +[2026-05-03 07:09:28.941] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -410 trig_steps -409 start_pos -19892 trig_pos -20301 halt_pos -20302 +[2026-05-03 07:09:29.786] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.83794999997555 85.29245000010962 0.00648387436214462 spos 0.005582000001538745 probing_z -0.16691799999846657 +[2026-05-03 07:09:29.786] [info] [gcode.cpp:559] [1969] probe at 34.838,85.292 is z=0.006484 +[2026-05-03 07:09:29.787] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3573957499999665 +[2026-05-03 07:09:29.789] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 120.13040000008517 +[2026-05-03 07:09:29.789] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -50.454500000134075 +[2026-05-03 07:09:29.789] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8305820000015215 +[2026-05-03 07:09:30.280] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:30.281] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:30.299] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2443456279 trigger_emit_ticks=2443840655 +[2026-05-03 07:09:30.311] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2443456279 trigger_emit_ticks=2443840655 +[2026-05-03 07:09:30.313] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2443456279 36803194647 trigger_emit_ticks 2443840655 36803579023 +[2026-05-03 07:09:30.314] [info] [homing.cpp:266] [1969] endstop_name probe tt 308.08953224765565 trigger_time 308.08953224765565 move_end_print_time 308.34317541666667 +[2026-05-03 07:09:30.315] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -403 trig_steps -399 start_pos -19902 trig_pos -20301 halt_pos -20305 +[2026-05-03 07:09:31.141] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.83794999997555 85.29245000010962 0.004962945925406942 spos 0.005582000001524534 probing_z -0.16691799999847856 +[2026-05-03 07:09:31.141] [info] [gcode.cpp:559] [1969] probe at 34.838,85.292 is z=0.004963 +[2026-05-03 07:09:31.142] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3549440840000102 +[2026-05-03 07:09:31.143] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 34.83794999997555 85.29245000010962 0.008717260654382414 +[2026-05-03 07:09:31.143] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:09:31.144] [info] [probe.cpp:857] [1969] _move_next 14 probe_points.size 49 + +[2026-05-03 07:09:31.153] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 145.26222000005458 +[2026-05-03 07:09:31.153] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -75.58632000014286 +[2026-05-03 07:09:31.153] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000001641 +[2026-05-03 07:09:32.387] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:32.388] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:32.402] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2696569581 trigger_emit_ticks=2696944581 +[2026-05-03 07:09:32.404] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2696569581 37056307949 trigger_emit_ticks 2696944581 37056682949 +[2026-05-03 07:09:32.407] [info] [homing.cpp:266] [1969] endstop_name probe tt 310.19876298442256 trigger_time 310.19876298442256 move_end_print_time 310.4511298333333 +[2026-05-03 07:09:32.407] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1279 trig_steps -1278 start_pos -19034 trig_pos -20312 halt_pos -20313 +[2026-05-03 07:09:33.137] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.83794999995586 110.42427000009872 -0.029556906400050903 spos -0.029417999998365474 probing_z -0.1944179999983593 +[2026-05-03 07:09:33.137] [info] [gcode.cpp:559] [1969] probe at 34.838,110.424 is z=-0.029557 +[2026-05-03 07:09:33.138] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.9939989179999884 +[2026-05-03 07:09:33.139] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 145.26222000005458 +[2026-05-03 07:09:33.139] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -75.58632000014285 +[2026-05-03 07:09:33.139] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8030820000016293 +[2026-05-03 07:09:33.635] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:33.635] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:33.650] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2846209675 trigger_emit_ticks=2846594049 +[2026-05-03 07:09:33.652] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2846209675 37205948043 trigger_emit_ticks 2846594049 37206332417 +[2026-05-03 07:09:33.653] [info] [homing.cpp:266] [1969] endstop_name probe tt 311.4458607989257 trigger_time 311.4458607989257 move_end_print_time 311.69795725 +[2026-05-03 07:09:33.654] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -415 trig_steps -413 start_pos -19913 trig_pos -20326 halt_pos -20328 +[2026-05-03 07:09:34.592] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.83794999995587 110.42427000009872 -0.04008899703966837 spos -0.03941799999837059 probing_z -0.22941799999837065 +[2026-05-03 07:09:34.593] [info] [gcode.cpp:559] [1969] probe at 34.838,110.424 is z=-0.040089 +[2026-05-03 07:09:34.593] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4550699179999924 +[2026-05-03 07:09:34.595] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 145.26222000005458 +[2026-05-03 07:09:34.595] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -75.58632000014285 +[2026-05-03 07:09:34.595] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7655820000016187 +[2026-05-03 07:09:35.082] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:35.082] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:35.099] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3019905605 trigger_emit_ticks=3020289981 +[2026-05-03 07:09:35.101] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3019905605 37379643973 trigger_emit_ticks 3020289981 37380028349 +[2026-05-03 07:09:35.103] [info] [homing.cpp:266] [1969] endstop_name probe tt 312.8933491094114 trigger_time 312.8933491094114 move_end_print_time 313.14537541666664 +[2026-05-03 07:09:35.103] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -399 trig_steps -398 start_pos -19928 trig_pos -20326 halt_pos -20327 +[2026-05-03 07:09:35.485] [info] [device_ui_message_handle.cpp:237] [1969] Handling bind function request {"script":"get_device_info"} +[2026-05-03 07:09:35.487] [info] [webhooks.cpp:756] [1969] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-05-03 07:09:35.488] [info] [webhooks.cpp:170] [1969] return total: {"id":39,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-05-03 07:09:35.491] [info] [device_ui_message_handle.cpp:237] [1969] Handling bind function request {"script":"get_bind_state"} +[2026-05-03 07:09:35.492] [info] [webhooks.cpp:756] [1969] return handle_bind_func: {"script":"get_bind_state","status":"idle"} +[2026-05-03 07:09:35.493] [info] [webhooks.cpp:170] [1969] return total: {"id":40,"method":"bind_func","result":{"script":"get_bind_state","status":"idle"}} +[2026-05-03 07:09:36.044] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.83794999995587 110.42427000009872 -0.04162598834301631 spos -0.04191799999837542 probing_z -0.2294179999983813 +[2026-05-03 07:09:36.045] [info] [gcode.cpp:559] [1969] probe at 34.838,110.424 is z=-0.041626 +[2026-05-03 07:09:36.046] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.452335043000005 +[2026-05-03 07:09:36.046] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 34.83794999995587 110.42427000009872 -0.037090630594245194 +[2026-05-03 07:09:36.047] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:09:36.047] [info] [probe.cpp:857] [1969] _move_next 15 probe_points.size 49 + +[2026-05-03 07:09:36.055] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 170.65570000000554 +[2026-05-03 07:09:36.056] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -50.19284000013397 +[2026-05-03 07:09:36.056] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000017382 +[2026-05-03 07:09:36.935] [info] [clocksync.cpp:199] [2024] mcu 'bed_sensor': New minimum RTT: sent_time=340.17637724499997,half_rtt=0.00015033350001658619,freq=119998211.13204205 +[2026-05-03 07:09:37.296] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:37.297] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:37.311] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3285577959 trigger_emit_ticks=3285962335 +[2026-05-03 07:09:37.313] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3285577959 37645316327 trigger_emit_ticks 3285962335 37645700703 +[2026-05-03 07:09:37.315] [info] [homing.cpp:266] [1969] endstop_name probe tt 315.1073197252961 trigger_time 315.1073197252961 move_end_print_time 315.35971220833335 +[2026-05-03 07:09:37.315] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1283 trig_steps -1281 start_pos -19034 trig_pos -20315 halt_pos -20317 +[2026-05-03 07:09:38.199] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.231429999935784 110.42427000006975 -0.038668767447491675 spos -0.0394179999982569 probing_z -0.20191799999826188 +[2026-05-03 07:09:38.200] [info] [gcode.cpp:559] [1969] probe at 60.231,110.424 is z=-0.038669 +[2026-05-03 07:09:38.201] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.153159709000022 +[2026-05-03 07:09:38.202] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 170.65570000000554 +[2026-05-03 07:09:38.202] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -50.19284000013397 +[2026-05-03 07:09:38.202] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.793082000001727 +[2026-05-03 07:09:38.698] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:38.699] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:38.716] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3453803493 trigger_emit_ticks=3454187867 +[2026-05-03 07:09:38.717] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3453803493 37813541861 trigger_emit_ticks 3454187867 37813926235 +[2026-05-03 07:09:38.718] [info] [homing.cpp:266] [1969] endstop_name probe tt 316.5092174781661 trigger_time 316.5092174781661 move_end_print_time 316.761860625 +[2026-05-03 07:09:38.719] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -415 trig_steps -413 start_pos -19917 trig_pos -20330 halt_pos -20332 +[2026-05-03 07:09:39.545] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.231429999935784 110.42427000006975 -0.04843183727719688 spos -0.04941799999827623 probing_z -0.23941799999827296 +[2026-05-03 07:09:39.546] [info] [gcode.cpp:559] [1969] probe at 60.231,110.424 is z=-0.048432 +[2026-05-03 07:09:39.547] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.345401125999956 +[2026-05-03 07:09:39.548] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 170.65570000000554 +[2026-05-03 07:09:39.548] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -50.19284000013397 +[2026-05-03 07:09:39.548] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7555820000017166 +[2026-05-03 07:09:40.038] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:40.039] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:40.052] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3614844991 +[2026-05-03 07:09:40.053] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 38654705664 trigger_emit_ticks 3614844991 37974583359 +[2026-05-03 07:09:40.054] [info] [homing.cpp:266] [1969] endstop_name probe tt 317.84804521606685 trigger_time 317.84804521606685 move_end_print_time 318.10126283333335 +[2026-05-03 07:09:40.054] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -398 trig_steps -395 start_pos -19932 trig_pos -20327 halt_pos -20330 +[2026-05-03 07:09:40.893] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.231429999935784 110.42427000006975 -0.04934895657444435 spos -0.04941799999827623 probing_z -0.23191799999828344 +[2026-05-03 07:09:40.894] [info] [gcode.cpp:559] [1969] probe at 60.231,110.424 is z=-0.049349 +[2026-05-03 07:09:40.895] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.347969667999962 +[2026-05-03 07:09:40.895] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 60.231429999935784 110.42427000006974 -0.04548318709971097 +[2026-05-03 07:09:40.895] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:09:40.896] [info] [probe.cpp:857] [1969] _move_next 16 probe_points.size 49 + +[2026-05-03 07:09:40.905] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 196.03671999995652 +[2026-05-03 07:09:40.905] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -24.811820000129195 +[2026-05-03 07:09:40.905] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000018364 +[2026-05-03 07:09:42.149] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:42.149] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:42.151] [info] [serialhdl.cpp:507] [2024] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 07:09:42.164] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3867967741 trigger_emit_ticks=3868352117 +[2026-05-03 07:09:42.166] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3867967741 38227706109 trigger_emit_ticks 3868352117 38228090485 +[2026-05-03 07:09:42.167] [info] [homing.cpp:266] [1969] endstop_name probe tt 319.9606349652338 trigger_time 319.9606349652338 move_end_print_time 320.2128329583333 +[2026-05-03 07:09:42.167] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1289 trig_steps -1288 start_pos -19034 trig_pos -20322 halt_pos -20323 +[2026-05-03 07:09:43.101] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61244999991366 110.42427000004285 -0.05598540125203308 spos -0.05691799999815572 probing_z -0.2194179999981638 +[2026-05-03 07:09:43.102] [info] [gcode.cpp:559] [1969] probe at 85.612,110.424 is z=-0.055985 +[2026-05-03 07:09:43.102] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.205421876999992 +[2026-05-03 07:09:43.104] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 196.0367199999565 +[2026-05-03 07:09:43.104] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -24.811820000129188 +[2026-05-03 07:09:43.104] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7780820000018254 +[2026-05-03 07:09:43.264] [error] [tmc_uart.cpp:295] [1969] _decode_read error #0 +[2026-05-03 07:09:43.601] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:43.602] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:43.631] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=4042517245 +[2026-05-03 07:09:43.633] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 38654705664 trigger_emit_ticks 4042517245 38402255613 +[2026-05-03 07:09:43.635] [info] [homing.cpp:266] [1969] endstop_name probe tt 321.41203142158747 trigger_time 321.41203142158747 move_end_print_time 321.66488991666665 +[2026-05-03 07:09:43.635] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -414 trig_steps -413 start_pos -19923 trig_pos -20336 halt_pos -20337 +[2026-05-03 07:09:44.465] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61244999991365 110.42427000004284 -0.06805496095170135 spos -0.06691799999817505 probing_z -0.2544179999981746 +[2026-05-03 07:09:44.466] [info] [gcode.cpp:559] [1969] probe at 85.612,110.424 is z=-0.068055 +[2026-05-03 07:09:44.466] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3638260839999816 +[2026-05-03 07:09:44.468] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 196.0367199999565 +[2026-05-03 07:09:44.468] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -24.811820000129188 +[2026-05-03 07:09:44.468] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7430820000018152 +[2026-05-03 07:09:44.956] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:44.959] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:44.976] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4204721883 trigger_emit_ticks=4205106257 +[2026-05-03 07:09:44.978] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 4204721883 38564460251 trigger_emit_ticks 4205106257 38564844625 +[2026-05-03 07:09:44.979] [info] [homing.cpp:266] [1969] endstop_name probe tt 322.7669595793836 trigger_time 322.7669595793836 move_end_print_time 323.0216545416667 +[2026-05-03 07:09:44.980] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -404 trig_steps -398 start_pos -19937 trig_pos -20335 halt_pos -20341 +[2026-05-03 07:09:45.812] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61244999991365 110.42427000004284 -0.07080314160095533 spos -0.07191799999818471 probing_z -0.25191799999818476 +[2026-05-03 07:09:45.813] [info] [gcode.cpp:559] [1969] probe at 85.612,110.424 is z=-0.070803 +[2026-05-03 07:09:45.814] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3473845839999967 +[2026-05-03 07:09:45.814] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 85.61244999991364 110.42427000004284 -0.06494783460156325 +[2026-05-03 07:09:45.815] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:09:45.815] [info] [probe.cpp:857] [1969] _move_next 17 probe_points.size 49 + +[2026-05-03 07:09:45.824] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 221.43019999990744 +[2026-05-03 07:09:45.824] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 0.5816599998696196 +[2026-05-03 07:09:45.824] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000019345 +[2026-05-03 07:09:47.077] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:47.078] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:47.094] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=164117385 trigger_emit_ticks=164501759 +[2026-05-03 07:09:47.097] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 164117385 38818823049 trigger_emit_ticks 164501759 38819207423 +[2026-05-03 07:09:47.098] [info] [homing.cpp:266] [1969] endstop_name probe tt 324.8866825585518 trigger_time 324.8866825585518 move_end_print_time 325.1409174583333 +[2026-05-03 07:09:47.099] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1303 trig_steps -1301 start_pos -19034 trig_pos -20335 halt_pos -20337 +[2026-05-03 07:09:47.984] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.00592999988854 110.42427000001891 -0.08555567108049231 spos -0.08441799999806676 probing_z -0.2519179999980654 +[2026-05-03 07:09:47.985] [info] [gcode.cpp:559] [1969] probe at 111.006,110.424 is z=-0.085556 +[2026-05-03 07:09:47.986] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.170053418000009 +[2026-05-03 07:09:47.987] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 221.43019999990744 +[2026-05-03 07:09:47.987] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 0.581659999869629 +[2026-05-03 07:09:47.987] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.743082000001924 +[2026-05-03 07:09:48.478] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:48.478] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:48.501] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=332440233 trigger_emit_ticks=332824632 +[2026-05-03 07:09:48.503] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 332440233 38987145897 trigger_emit_ticks 332824632 38987530296 +[2026-05-03 07:09:48.504] [info] [homing.cpp:266] [1969] endstop_name probe tt 326.2893956808395 trigger_time 326.2893956808395 move_end_print_time 326.54177675 +[2026-05-03 07:09:48.504] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -406 trig_steps -404 start_pos -19937 trig_pos -20341 halt_pos -20343 +[2026-05-03 07:09:49.438] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.00592999988854 110.42427000001891 -0.08873199135406959 spos -0.08941799999807643 probing_z -0.26691799999807597 +[2026-05-03 07:09:49.439] [info] [gcode.cpp:559] [1969] probe at 111.006,110.424 is z=-0.088732 +[2026-05-03 07:09:49.440] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4537177509999992 +[2026-05-03 07:09:49.441] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 221.43019999990744 +[2026-05-03 07:09:49.441] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 0.581659999869629 +[2026-05-03 07:09:49.441] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7280820000019137 +[2026-05-03 07:09:49.930] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:49.930] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:49.944] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=506616285 trigger_emit_ticks=507000659 +[2026-05-03 07:09:49.946] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 506616285 39161321949 trigger_emit_ticks 507000659 39161706323 +[2026-05-03 07:09:49.947] [info] [homing.cpp:266] [1969] endstop_name probe tt 327.74088592015016 trigger_time 327.74088592015016 move_end_print_time 327.99329041666664 +[2026-05-03 07:09:49.947] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -401 trig_steps -399 start_pos -19943 trig_pos -20342 halt_pos -20344 +[2026-05-03 07:09:50.778] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.00592999988854 110.42427000001891 -0.08812317391388674 spos -0.0869179999980858 probing_z -0.26941799999808635 +[2026-05-03 07:09:50.779] [info] [gcode.cpp:559] [1969] probe at 111.006,110.424 is z=-0.088123 +[2026-05-03 07:09:50.780] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3398492509999755 +[2026-05-03 07:09:50.780] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 111.00592999988855 110.42427000001891 -0.08747027878281621 +[2026-05-03 07:09:50.781] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:09:50.781] [info] [probe.cpp:857] [1969] _move_next 18 probe_points.size 49 + +[2026-05-03 07:09:50.790] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 246.8236799998584 +[2026-05-03 07:09:50.790] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 25.97513999986818 +[2026-05-03 07:09:50.790] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000020327 +[2026-05-03 07:09:52.042] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:52.043] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:52.062] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=760119021 trigger_emit_ticks=760503395 +[2026-05-03 07:09:52.064] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 760119021 39414824685 trigger_emit_ticks 760503395 39415209059 +[2026-05-03 07:09:52.065] [info] [homing.cpp:266] [1969] endstop_name probe tt 329.853441432713 trigger_time 329.853441432713 move_end_print_time 330.10525608333336 +[2026-05-03 07:09:52.066] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1303 trig_steps -1301 start_pos -19034 trig_pos -20335 halt_pos -20337 +[2026-05-03 07:09:52.950] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39940999986328 110.4242699999951 -0.0961361369895801 spos -0.09691799999797013 probing_z -0.25191799999796727 +[2026-05-03 07:09:52.951] [info] [gcode.cpp:559] [1969] probe at 136.399,110.424 is z=-0.096136 +[2026-05-03 07:09:52.952] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.1697281259999954 +[2026-05-03 07:09:52.953] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 246.82367999985837 +[2026-05-03 07:09:52.953] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 25.97513999986819 +[2026-05-03 07:09:52.953] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7430820000020222 +[2026-05-03 07:09:53.446] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:53.446] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:53.460] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=928635207 trigger_emit_ticks=929010207 +[2026-05-03 07:09:53.463] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 928635207 39583340871 trigger_emit_ticks 929010207 39583715871 +[2026-05-03 07:09:53.464] [info] [homing.cpp:266] [1969] endstop_name probe tt 331.25768625682576 trigger_time 331.25768625682576 move_end_print_time 331.5095713333333 +[2026-05-03 07:09:53.464] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -409 trig_steps -408 start_pos -19937 trig_pos -20345 halt_pos -20346 +[2026-05-03 07:09:54.294] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39940999986328 110.42426999999509 -0.10130734443275141 spos -0.10191799999797269 probing_z -0.27691799999797784 +[2026-05-03 07:09:54.294] [info] [gcode.cpp:559] [1969] probe at 136.399,110.424 is z=-0.101307 +[2026-05-03 07:09:54.295] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3434825009999827 +[2026-05-03 07:09:54.296] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 246.82367999985837 +[2026-05-03 07:09:54.296] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 25.97513999986819 +[2026-05-03 07:09:54.296] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.720582000002012 +[2026-05-03 07:09:54.304] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:09:54.787] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:54.788] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:09:54.802] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1089379933 trigger_emit_ticks=1089764309 +[2026-05-03 07:09:54.804] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1089379933 39744085597 trigger_emit_ticks 1089764309 39744469973 +[2026-05-03 07:09:54.805] [info] [homing.cpp:266] [1969] endstop_name probe tt 332.59732473072705 trigger_time 332.59732473072705 move_end_print_time 332.8506781666667 +[2026-05-03 07:09:54.805] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -404 trig_steps -400 start_pos -19946 trig_pos -20346 halt_pos -20350 +[2026-05-03 07:09:55.735] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39940999986328 110.42426999999509 -0.10758782373756243 spos -0.10691799999798945 probing_z -0.279417999997988 +[2026-05-03 07:09:55.735] [info] [gcode.cpp:559] [1969] probe at 136.399,110.424 is z=-0.107588 +[2026-05-03 07:09:55.736] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.441164501000003 +[2026-05-03 07:09:55.737] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 136.39940999986328 110.42426999999509 -0.10167710171996465 +[2026-05-03 07:09:55.737] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:09:55.738] [info] [probe.cpp:857] [1969] _move_next 19 probe_points.size 49 + +[2026-05-03 07:09:55.747] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 272.2046999998833 +[2026-05-03 07:09:55.747] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 51.36861999987363 +[2026-05-03 07:09:55.747] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000002131 +[2026-05-03 07:09:57.004] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:09:57.021] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1355521307 trigger_emit_ticks=1355905683 +[2026-05-03 07:09:57.022] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1355521307 40010226971 trigger_emit_ticks 1355905683 40010611347 +[2026-05-03 07:09:57.023] [info] [homing.cpp:266] [1969] endstop_name probe tt 334.8152057167387 trigger_time 334.8152057167387 move_end_print_time 335.06759125 +[2026-05-03 07:09:57.023] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1312 trig_steps -1310 start_pos -19034 trig_pos -20344 halt_pos -20346 +[2026-05-03 07:09:57.921] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.78665999987845 110.41804000000484 -0.1201776724951053 spos -0.1194179999978644 probing_z -0.2744179999978691 +[2026-05-03 07:09:57.921] [info] [gcode.cpp:559] [1969] probe at 161.787,110.418 is z=-0.120178 +[2026-05-03 07:09:57.922] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.1836100010000337 +[2026-05-03 07:09:57.923] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:09:57.924] [info] [gcode_move.cpp:52] [1969] G180 select 915 +[2026-05-03 07:09:57.926] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.928] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.930] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.932] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.935] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.937] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.938] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.940] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.942] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.944] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.945] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.947] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.949] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.951] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.954] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.957] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.959] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.961] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.963] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.964] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.967] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.969] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.970] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.972] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.974] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.976] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:57.978] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:58.002] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:58.065] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:58.127] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:58.191] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:58.252] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:58.314] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:58.377] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:58.439] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:58.502] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:58.563] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:58.626] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:58.689] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:58.751] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:09:58.814] [info] [gcode_move.cpp:772] [1969] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 07:09:58.815] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 272.20469999988325 +[2026-05-03 07:09:58.815] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 51.36861999987363 +[2026-05-03 07:09:58.815] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 1.720582000002099 +[2026-05-03 07:10:01.265] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:01.275] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:10:01.290] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1866897763 trigger_emit_ticks=1867282139 +[2026-05-03 07:10:01.291] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1866897763 40521603427 trigger_emit_ticks 1867282139 40521987803 +[2026-05-03 07:10:01.292] [info] [homing.cpp:266] [1969] endstop_name probe tt 339.07674169998495 trigger_time 339.07674169998495 move_end_print_time 339.329028 +[2026-05-03 07:10:01.293] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -800 trig_steps -798 start_pos -19546 trig_pos -20344 halt_pos -20346 +[2026-05-03 07:10:02.174] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.78665999987845 110.41804000000481 -0.12065902333161732 spos -0.11941799999789993 probing_z -0.27441799999790106 +[2026-05-03 07:10:02.175] [info] [gcode.cpp:559] [1969] probe at 161.787,110.418 is z=-0.120659 +[2026-05-03 07:10:02.176] [info] [load_cell_probe.cpp:333] [1969] run_probe time 3.3619865019999793 +[2026-05-03 07:10:02.177] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 272.20469999988325 +[2026-05-03 07:10:02.177] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 51.36861999987366 +[2026-05-03 07:10:02.177] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7205820000020888 +[2026-05-03 07:10:02.671] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:02.672] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:02.686] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=2035971949 +[2026-05-03 07:10:02.688] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 38654705664 trigger_emit_ticks 2035971949 40690677613 +[2026-05-03 07:10:02.690] [info] [homing.cpp:266] [1969] endstop_name probe tt 340.4825109658633 trigger_time 340.4825109658633 move_end_print_time 340.73492458333334 +[2026-05-03 07:10:02.690] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -409 trig_steps -408 start_pos -19946 trig_pos -20354 halt_pos -20355 +[2026-05-03 07:10:03.523] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.78665999987845 110.4180400000048 -0.1247310979102782 spos -0.12441799999790959 probing_z -0.2994179999979112 +[2026-05-03 07:10:03.524] [info] [gcode.cpp:559] [1969] probe at 161.787,110.418 is z=-0.124731 +[2026-05-03 07:10:03.524] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.348550333999981 +[2026-05-03 07:10:03.525] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 161.78665999987845 110.41804000000481 -0.12185593124566695 +[2026-05-03 07:10:03.525] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:10:03.526] [info] [probe.cpp:857] [1969] _move_next 20 probe_points.size 49 + +[2026-05-03 07:10:03.534] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 297.59817999995005 +[2026-05-03 07:10:03.534] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 76.74963999988253 +[2026-05-03 07:10:03.534] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000002207 +[2026-05-03 07:10:04.794] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:04.794] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:04.808] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2290320251 trigger_emit_ticks=2290704648 +[2026-05-03 07:10:04.810] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2290320251 40945025915 trigger_emit_ticks 2290704648 40945410312 +[2026-05-03 07:10:04.811] [info] [homing.cpp:266] [1969] endstop_name probe tt 342.60531519748935 trigger_time 342.60531519748935 move_end_print_time 342.857347 +[2026-05-03 07:10:04.811] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1314 trig_steps -1313 start_pos -19034 trig_pos -20347 halt_pos -20348 +[2026-05-03 07:10:05.698] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.1739099999163 110.42427000003376 -0.11929712775386875 spos -0.11941799999778624 probing_z -0.281917999997793 +[2026-05-03 07:10:05.699] [info] [gcode.cpp:559] [1969] probe at 187.174,110.424 is z=-0.119297 +[2026-05-03 07:10:05.700] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.173249792999968 +[2026-05-03 07:10:05.701] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 297.59817999995005 +[2026-05-03 07:10:05.701] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 76.74963999988256 +[2026-05-03 07:10:05.701] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7155820000021968 +[2026-05-03 07:10:06.193] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:06.194] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:06.212] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2458248577 trigger_emit_ticks=2458632953 +[2026-05-03 07:10:06.214] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2458248577 41112954241 trigger_emit_ticks 2458632953 41113338617 +[2026-05-03 07:10:06.215] [info] [homing.cpp:266] [1969] endstop_name probe tt 344.0047383681111 trigger_time 344.0047383681111 move_end_print_time 344.2574670833333 +[2026-05-03 07:10:06.215] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -408 trig_steps -407 start_pos -19948 trig_pos -20355 halt_pos -20356 +[2026-05-03 07:10:07.146] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.1739099999163 110.42427000003374 -0.12399449465476792 spos -0.12441799999780301 probing_z -0.3019179999978032 +[2026-05-03 07:10:07.146] [info] [gcode.cpp:559] [1969] probe at 187.174,110.424 is z=-0.123994 +[2026-05-03 07:10:07.147] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4472299169999587 +[2026-05-03 07:10:07.149] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 297.59817999995005 +[2026-05-03 07:10:07.149] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 76.74963999988256 +[2026-05-03 07:10:07.149] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.6955820000021866 +[2026-05-03 07:10:07.649] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:07.650] [info] [serialhdl.cpp:507] [2024] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 07:10:07.681] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2632890679 trigger_emit_ticks=2633275053 +[2026-05-03 07:10:07.683] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2632890679 41287596343 trigger_emit_ticks 2633275053 41287980717 +[2026-05-03 07:10:07.684] [info] [homing.cpp:266] [1969] endstop_name probe tt 345.4601120240095 trigger_time 345.4601120240095 move_end_print_time 345.71244025 +[2026-05-03 07:10:07.684] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -397 trig_steps -395 start_pos -19956 trig_pos -20351 halt_pos -20353 +[2026-05-03 07:10:08.613] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.1739099999163 110.42427000003374 -0.12221268024717818 spos -0.12191799999781949 probing_z -0.2919179999978134 +[2026-05-03 07:10:08.614] [info] [gcode.cpp:559] [1969] probe at 187.174,110.424 is z=-0.122213 +[2026-05-03 07:10:08.615] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4679755010000122 +[2026-05-03 07:10:08.616] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 187.1739099999163 110.42427000003374 -0.12183476755193828 +[2026-05-03 07:10:08.616] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:10:08.617] [info] [probe.cpp:857] [1969] _move_next 21 probe_points.size 49 + +[2026-05-03 07:10:08.629] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 322.73000000001616 +[2026-05-03 07:10:08.629] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 51.617819999873774 +[2026-05-03 07:10:08.629] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000023053 +[2026-05-03 07:10:09.887] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:09.887] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:09.902] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2901408617 trigger_emit_ticks=2901793014 +[2026-05-03 07:10:09.904] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2901408617 41556114281 trigger_emit_ticks 2901793014 41556498678 +[2026-05-03 07:10:09.905] [info] [homing.cpp:266] [1969] endstop_name probe tt 347.6977957398912 trigger_time 347.6977957398912 move_end_print_time 347.950335625 +[2026-05-03 07:10:09.905] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1315 trig_steps -1313 start_pos -19034 trig_pos -20347 halt_pos -20349 +[2026-05-03 07:10:10.798] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.17390999994495 135.5560900000712 -0.11821400191029369 spos -0.11941799999769387 probing_z -0.28191799999769485 +[2026-05-03 07:10:10.798] [info] [gcode.cpp:559] [1969] probe at 187.174,135.556 is z=-0.118214 +[2026-05-03 07:10:10.799] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.1797328760000028 +[2026-05-03 07:10:10.800] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 322.73000000001616 +[2026-05-03 07:10:10.800] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 51.617819999873745 +[2026-05-03 07:10:10.801] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.713082000002295 +[2026-05-03 07:10:11.293] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:11.293] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:11.322] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3070193239 trigger_emit_ticks=3070577613 +[2026-05-03 07:10:11.324] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3070193239 41724898903 trigger_emit_ticks 3070577613 41725283277 +[2026-05-03 07:10:11.325] [info] [homing.cpp:266] [1969] endstop_name probe tt 349.10435592606734 trigger_time 349.10435592606734 move_end_print_time 349.3571617083333 +[2026-05-03 07:10:11.325] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -408 trig_steps -407 start_pos -19949 trig_pos -20356 halt_pos -20357 +[2026-05-03 07:10:12.254] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.17390999994495 135.5560900000712 -0.12210396441317556 spos -0.12191799999771291 probing_z -0.304417999997705 +[2026-05-03 07:10:12.254] [info] [gcode.cpp:559] [1969] probe at 187.174,135.556 is z=-0.122104 +[2026-05-03 07:10:12.255] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4560817920000204 +[2026-05-03 07:10:12.257] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 322.73000000001616 +[2026-05-03 07:10:12.257] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 51.617819999873745 +[2026-05-03 07:10:12.257] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.6930820000022848 +[2026-05-03 07:10:12.746] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:12.760] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3244547173 trigger_emit_ticks=3244922173 +[2026-05-03 07:10:12.761] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3244547173 41899252837 trigger_emit_ticks 3244922173 41899627837 +[2026-05-03 07:10:12.762] [info] [homing.cpp:266] [1969] endstop_name probe tt 350.55725023847975 trigger_time 350.55725023847975 move_end_print_time 350.809262625 +[2026-05-03 07:10:12.762] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -401 trig_steps -400 start_pos -19957 trig_pos -20357 halt_pos -20358 +[2026-05-03 07:10:13.642] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.17390999994495 135.5560900000712 -0.12476145716337633 spos -0.12441799999771064 probing_z -0.3069179999977152 +[2026-05-03 07:10:13.643] [info] [gcode.cpp:559] [1969] probe at 187.174,135.556 is z=-0.124761 +[2026-05-03 07:10:13.644] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3881402509999816 +[2026-05-03 07:10:13.644] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 187.17390999994495 135.5560900000712 -0.12169314116228186 +[2026-05-03 07:10:13.644] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:10:13.645] [info] [probe.cpp:857] [1969] _move_next 22 probe_points.size 49 + +[2026-05-03 07:10:13.654] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 297.33651999994936 +[2026-05-03 07:10:13.654] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 26.23679999986816 +[2026-05-03 07:10:13.654] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000002403 +[2026-05-03 07:10:14.367] [info] [clocksync.cpp:212] [2024] mcu 'bed_sensor': Ignoring clock sample: sent_time=377.606562221,time_avg=348.05724951973787,freq=119998184.5178275,diff=136977.24642944336(0.0011414770535786948),stddev=2856.683817801023 +[2026-05-03 07:10:14.912] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:14.912] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:14.913] [info] [serialhdl.cpp:507] [2024] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 07:10:14.927] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3504537341 trigger_emit_ticks=3504921717 +[2026-05-03 07:10:14.928] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3504537341 42159243005 trigger_emit_ticks 3504921717 42159627381 +[2026-05-03 07:10:14.930] [info] [homing.cpp:266] [1969] endstop_name probe tt 352.72394791637186 trigger_time 352.72394791637186 move_end_print_time 352.97585245833335 +[2026-05-03 07:10:14.930] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1312 trig_steps -1311 start_pos -19034 trig_pos -20345 halt_pos -20346 +[2026-05-03 07:10:15.814] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.78665999990875 135.5498600000406 -0.11728905606287293 spos -0.11691799999759667 probing_z -0.2769179999975968 +[2026-05-03 07:10:15.815] [info] [gcode.cpp:559] [1969] probe at 161.787,135.550 is z=-0.117289 +[2026-05-03 07:10:15.816] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.170691250999994 +[2026-05-03 07:10:15.818] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 297.33651999994936 +[2026-05-03 07:10:15.818] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 26.23679999986814 +[2026-05-03 07:10:15.818] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7205820000023926 +[2026-05-03 07:10:16.312] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:16.313] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:16.331] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3672473210 trigger_emit_ticks=3672848187 +[2026-05-03 07:10:16.333] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3672473210 42327178874 trigger_emit_ticks 3672848187 42327553851 +[2026-05-03 07:10:16.335] [info] [homing.cpp:266] [1969] endstop_name probe tt 354.12335716120754 trigger_time 354.12335716120754 move_end_print_time 354.37654258333333 +[2026-05-03 07:10:16.335] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -412 trig_steps -411 start_pos -19946 trig_pos -20357 halt_pos -20358 +[2026-05-03 07:10:17.162] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.78665999990875 135.5498600000406 -0.12277022557149503 spos -0.12191799999760633 probing_z -0.3069179999976075 +[2026-05-03 07:10:17.163] [info] [gcode.cpp:559] [1969] probe at 161.787,135.550 is z=-0.122770 +[2026-05-03 07:10:17.164] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3473531680000406 +[2026-05-03 07:10:17.165] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 297.33651999994936 +[2026-05-03 07:10:17.165] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 26.23679999986814 +[2026-05-03 07:10:17.165] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.6905820000023823 +[2026-05-03 07:10:17.666] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:17.694] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3834945073 trigger_emit_ticks=3835329447 +[2026-05-03 07:10:17.706] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3834945073 trigger_emit_ticks=3835329447 +[2026-05-03 07:10:17.708] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3834945073 42489650737 trigger_emit_ticks 3835329447 42490035111 +[2026-05-03 07:10:17.710] [info] [homing.cpp:266] [1969] endstop_name probe tt 355.47738877541894 trigger_time 355.47738877541894 move_end_print_time 355.7292385 +[2026-05-03 07:10:17.711] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -19958 trig_pos -20357 halt_pos -20358 +[2026-05-03 07:10:18.653] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.78665999990875 135.5498600000406 -0.12412994668067306 spos -0.12441799999761827 probing_z -0.3069179999976177 +[2026-05-03 07:10:18.653] [info] [gcode.cpp:559] [1969] probe at 161.787,135.550 is z=-0.124130 +[2026-05-03 07:10:18.654] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4900696670000002 +[2026-05-03 07:10:18.654] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 161.78665999990875 135.5498600000406 -0.12139640943834701 +[2026-05-03 07:10:18.655] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:10:18.655] [info] [probe.cpp:857] [1969] _move_next 23 probe_points.size 49 + +[2026-05-03 07:10:18.665] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 271.9554999998826 +[2026-05-03 07:10:18.665] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 0.8433199998696455 +[2026-05-03 07:10:18.665] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000025007 +[2026-05-03 07:10:19.920] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:19.920] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:19.935] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=4105858023 +[2026-05-03 07:10:19.936] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 42949672960 trigger_emit_ticks 4105858023 42760563687 +[2026-05-03 07:10:19.937] [info] [homing.cpp:266] [1969] endstop_name probe tt 357.7318280759491 trigger_time 357.7318280759491 move_end_print_time 357.984390125 +[2026-05-03 07:10:19.938] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1306 trig_steps -1305 start_pos -19034 trig_pos -20339 halt_pos -20340 +[2026-05-03 07:10:20.823] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39940999987613 135.55609000000646 -0.10362710297312325 spos -0.10441799999749435 probing_z -0.26191799999749943 +[2026-05-03 07:10:20.823] [info] [gcode.cpp:559] [1969] probe at 136.399,135.556 is z=-0.103627 +[2026-05-03 07:10:20.824] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.168166751000001 +[2026-05-03 07:10:20.826] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 271.9554999998826 +[2026-05-03 07:10:20.826] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 0.8433199998696637 +[2026-05-03 07:10:20.826] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7355820000024904 +[2026-05-03 07:10:21.321] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:21.321] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:21.339] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=4273881183 +[2026-05-03 07:10:21.340] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 42949672960 trigger_emit_ticks 4273881183 42928586847 +[2026-05-03 07:10:21.341] [info] [homing.cpp:266] [1969] endstop_name probe tt 359.13204056062904 trigger_time 359.13204056062904 move_end_print_time 359.38521675 +[2026-05-03 07:10:21.342] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -413 trig_steps -411 start_pos -19940 trig_pos -20351 halt_pos -20353 +[2026-05-03 07:10:22.271] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39940999987613 135.55609000000646 -0.11358779540385838 spos -0.11441799999751368 probing_z -0.29191799999750967 +[2026-05-03 07:10:22.271] [info] [gcode.cpp:559] [1969] probe at 136.399,135.556 is z=-0.113588 +[2026-05-03 07:10:22.272] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4476873340000225 +[2026-05-03 07:10:22.273] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 271.9554999998826 +[2026-05-03 07:10:22.274] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 0.8433199998696637 +[2026-05-03 07:10:22.274] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7030820000024802 +[2026-05-03 07:10:22.760] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:22.761] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:22.776] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=151345677 trigger_emit_ticks=151730051 +[2026-05-03 07:10:22.778] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 151345677 43101018637 trigger_emit_ticks 151730051 43101403011 +[2026-05-03 07:10:22.778] [info] [homing.cpp:266] [1969] endstop_name probe tt 360.5721948024357 trigger_time 360.5721948024357 move_end_print_time 360.8238029166667 +[2026-05-03 07:10:22.778] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -398 trig_steps -397 start_pos -19953 trig_pos -20350 halt_pos -20351 +[2026-05-03 07:10:22.965] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:360.77800000037996,last_temp:60.00380540444593,temp:60.00380540444593,target_temp:60,smoothed_temp:60.00259970389981 +[2026-05-03 07:10:23.660] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39940999987613 135.55609000000646 -0.11218391688941193 spos -0.11191799999752305 probing_z -0.2894179999975198 +[2026-05-03 07:10:23.660] [info] [gcode.cpp:559] [1969] probe at 136.399,135.556 is z=-0.112184 +[2026-05-03 07:10:23.662] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3891709590000119 +[2026-05-03 07:10:23.662] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 136.39940999987613 135.55609000000646 -0.10979960508879787 +[2026-05-03 07:10:23.663] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:10:23.663] [info] [probe.cpp:857] [1969] _move_next 24 probe_points.size 49 + +[2026-05-03 07:10:23.671] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 246.56201999985885 +[2026-05-03 07:10:23.672] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -24.5501600001292 +[2026-05-03 07:10:23.672] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000002599 +[2026-05-03 07:10:24.924] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:24.925] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:24.940] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=411045505 trigger_emit_ticks=411429881 +[2026-05-03 07:10:24.942] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 411045505 43360718465 trigger_emit_ticks 411429881 43361102841 +[2026-05-03 07:10:24.943] [info] [homing.cpp:266] [1969] endstop_name probe tt 362.7363928736257 trigger_time 362.7363928736257 move_end_print_time 362.9886667916667 +[2026-05-03 07:10:24.943] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1302 trig_steps -1301 start_pos -19034 trig_pos -20335 halt_pos -20336 +[2026-05-03 07:10:25.829] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.00592999986482 135.55608999999401 -0.08904787142018608 spos -0.08941799999740141 probing_z -0.25191799999740105 +[2026-05-03 07:10:25.829] [info] [gcode.cpp:559] [1969] probe at 111.006,135.556 is z=-0.089048 +[2026-05-03 07:10:25.830] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.166275084999995 +[2026-05-03 07:10:25.831] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 246.56201999985882 +[2026-05-03 07:10:25.831] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -24.55016000012921 +[2026-05-03 07:10:25.832] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7455820000025888 +[2026-05-03 07:10:26.327] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:26.328] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:26.344] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=579740417 +[2026-05-03 07:10:26.346] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 42949672960 trigger_emit_ticks 579740417 43529413377 +[2026-05-03 07:10:26.347] [info] [homing.cpp:266] [1969] endstop_name probe tt 364.13900482456387 trigger_time 364.13900482456387 move_end_print_time 364.3916776666667 +[2026-05-03 07:10:26.348] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -415 trig_steps -414 start_pos -19936 trig_pos -20350 halt_pos -20351 +[2026-05-03 07:10:27.177] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.0059299998648 135.55608999999401 -0.09653015621654099 spos -0.0969179999974159 probing_z -0.28941799999741114 +[2026-05-03 07:10:27.177] [info] [gcode.cpp:559] [1969] probe at 111.006,135.556 is z=-0.096530 +[2026-05-03 07:10:27.178] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3477997090000144 +[2026-05-03 07:10:27.179] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 246.56201999985882 +[2026-05-03 07:10:27.179] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -24.55016000012921 +[2026-05-03 07:10:27.179] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7080820000025785 +[2026-05-03 07:10:27.680] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:27.680] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:27.706] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=741911239 +[2026-05-03 07:10:27.708] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 42949672960 trigger_emit_ticks 741911239 43691584199 +[2026-05-03 07:10:27.709] [info] [homing.cpp:266] [1969] endstop_name probe tt 365.4904507450279 trigger_time 365.4904507450279 move_end_print_time 365.7433336666667 +[2026-05-03 07:10:27.710] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -402 trig_steps -398 start_pos -19951 trig_pos -20349 halt_pos -20353 +[2026-05-03 07:10:28.611] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:366.42305505450105,last_temp:140.2275811957801,temp:140.2275811957801,target_temp:140,smoothed_temp:140.0144721749431 +[2026-05-03 07:10:28.637] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.0059299998648 135.55608999999401 -0.09617448260042866 spos -0.09691799999742301 probing_z -0.2869179999974215 +[2026-05-03 07:10:28.638] [info] [gcode.cpp:559] [1969] probe at 111.006,135.556 is z=-0.096174 +[2026-05-03 07:10:28.639] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.460406459000012 +[2026-05-03 07:10:28.639] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 111.0059299998648 135.55608999999401 -0.09391750341238525 +[2026-05-03 07:10:28.639] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:10:28.640] [info] [probe.cpp:857] [1969] _move_next 25 probe_points.size 49 + +[2026-05-03 07:10:28.649] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 221.16853999990786 +[2026-05-03 07:10:28.650] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -49.931180000133836 +[2026-05-03 07:10:28.650] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000002697 +[2026-05-03 07:10:29.901] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:29.901] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:29.915] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1008521600 +[2026-05-03 07:10:29.918] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 42949672960 trigger_emit_ticks 1008521600 43958194560 +[2026-05-03 07:10:29.918] [info] [homing.cpp:266] [1969] endstop_name probe tt 367.7122386305713 trigger_time 367.7122386305713 move_end_print_time 367.9642509583333 +[2026-05-03 07:10:29.919] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1299 trig_steps -1298 start_pos -19034 trig_pos -20332 halt_pos -20333 +[2026-05-03 07:10:30.801] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61867999988701 135.54986000002086 -0.06485645482270594 spos -0.06441799999729625 probing_z -0.24441799999730307 +[2026-05-03 07:10:30.802] [info] [gcode.cpp:559] [1969] probe at 85.619,135.550 is z=-0.064856 +[2026-05-03 07:10:30.802] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.1615658760000542 +[2026-05-03 07:10:30.803] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 221.16853999990786 +[2026-05-03 07:10:30.804] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -49.93118000013385 +[2026-05-03 07:10:30.804] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7530820000026867 +[2026-05-03 07:10:31.300] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:31.300] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:31.325] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1176464987 +[2026-05-03 07:10:31.327] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 42949672960 trigger_emit_ticks 1176464987 44126137947 +[2026-05-03 07:10:31.329] [info] [homing.cpp:266] [1969] endstop_name probe tt 369.1117883765217 trigger_time 369.1117883765217 move_end_print_time 369.36430416666667 +[2026-05-03 07:10:31.329] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -416 trig_steps -415 start_pos -19933 trig_pos -20348 halt_pos -20349 +[2026-05-03 07:10:32.272] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61867999988701 135.54986000002086 -0.08046923930420041 spos -0.07941799999731103 probing_z -0.28441799999731343 +[2026-05-03 07:10:32.273] [info] [gcode.cpp:559] [1969] probe at 85.619,135.550 is z=-0.080469 +[2026-05-03 07:10:32.273] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4709468340000171 +[2026-05-03 07:10:32.275] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 221.16853999990786 +[2026-05-03 07:10:32.275] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -49.93118000013385 +[2026-05-03 07:10:32.276] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7130820000026764 +[2026-05-03 07:10:32.764] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:32.765] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:32.780] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1351780123 trigger_emit_ticks=1352164497 +[2026-05-03 07:10:32.781] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1351780123 44301453083 trigger_emit_ticks 1352164497 44301837457 +[2026-05-03 07:10:32.782] [info] [homing.cpp:266] [1969] endstop_name probe tt 370.57597171123655 trigger_time 370.57597171123655 move_end_print_time 370.82813633333336 +[2026-05-03 07:10:32.782] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -399 trig_steps -398 start_pos -19949 trig_pos -20347 halt_pos -20348 +[2026-05-03 07:10:33.670] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61867999988701 135.54986000002086 -0.08074804801783936 spos -0.08191799999732297 probing_z -0.2819179999973236 +[2026-05-03 07:10:33.671] [info] [gcode.cpp:559] [1969] probe at 85.619,135.550 is z=-0.080748 +[2026-05-03 07:10:33.672] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3979834999999525 +[2026-05-03 07:10:33.672] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 85.618679999887 135.54986000002086 -0.07535791404824857 +[2026-05-03 07:10:33.673] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:10:33.673] [info] [probe.cpp:857] [1969] _move_next 26 probe_points.size 49 + +[2026-05-03 07:10:33.683] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 195.7750599999569 +[2026-05-03 07:10:33.684] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -75.32466000014273 +[2026-05-03 07:10:33.684] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000002795 +[2026-05-03 07:10:34.930] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:34.931] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:34.946] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1611582608 trigger_emit_ticks=1611966961 +[2026-05-03 07:10:34.947] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1611582608 44561255568 trigger_emit_ticks 1611966961 44561639921 +[2026-05-03 07:10:34.948] [info] [homing.cpp:266] [1969] endstop_name probe tt 372.7410243981709 trigger_time 372.7410243981709 move_end_print_time 372.9941454583333 +[2026-05-03 07:10:34.948] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1290 trig_steps -1289 start_pos -19034 trig_pos -20323 halt_pos -20324 +[2026-05-03 07:10:35.882] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.22519999990709 135.54986000004982 -0.05182148617968882 spos -0.05191799999720814 probing_z -0.22191799999720496 +[2026-05-03 07:10:35.884] [info] [gcode.cpp:559] [1969] probe at 60.225,135.550 is z=-0.051821 +[2026-05-03 07:10:35.885] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.2110392509999883 +[2026-05-03 07:10:35.886] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:10:35.887] [info] [gcode_move.cpp:52] [1969] G180 select 915 +[2026-05-03 07:10:35.889] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.892] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.893] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.896] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.897] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.899] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.901] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.903] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.904] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.906] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.908] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.910] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.911] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.913] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.915] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.917] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.918] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.920] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.922] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.924] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.925] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.927] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.929] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.931] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.932] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.935] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.937] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:35.966] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:36.028] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:36.091] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:36.153] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:36.216] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:36.278] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:36.340] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:36.403] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:36.466] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:36.528] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:36.591] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:36.652] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:36.715] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:10:36.777] [info] [gcode_move.cpp:772] [1969] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 07:10:36.778] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 195.7750599999569 +[2026-05-03 07:10:36.778] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -75.32466000014273 +[2026-05-03 07:10:36.778] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 1.7755820000027631 +[2026-05-03 07:10:39.230] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:39.230] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:39.245] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2127654215 trigger_emit_ticks=2128038591 +[2026-05-03 07:10:39.247] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2127654215 45077327175 trigger_emit_ticks 2128038591 45077711551 +[2026-05-03 07:10:39.249] [info] [homing.cpp:266] [1969] endstop_name probe tt 377.0416872628765 trigger_time 377.0416872628765 move_end_print_time 377.29432825 +[2026-05-03 07:10:39.249] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -802 trig_steps -801 start_pos -19524 trig_pos -20325 halt_pos -20326 +[2026-05-03 07:10:40.182] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.22519999990709 135.54986000004982 -0.05273426433699677 spos -0.05191799999724367 probing_z -0.22691799999723683 +[2026-05-03 07:10:40.182] [info] [gcode.cpp:559] [1969] probe at 60.225,135.550 is z=-0.052734 +[2026-05-03 07:10:40.184] [info] [load_cell_probe.cpp:333] [1969] run_probe time 3.4064387100000317 +[2026-05-03 07:10:40.185] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 195.7750599999569 +[2026-05-03 07:10:40.185] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -75.32466000014273 +[2026-05-03 07:10:40.185] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7705820000027526 +[2026-05-03 07:10:40.681] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:40.681] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:40.682] [info] [serialhdl.cpp:507] [2024] mcu 'bed_sensor': got handle_default name: trsync_state +[2026-05-03 07:10:40.713] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2301716339 trigger_emit_ticks=2302100713 +[2026-05-03 07:10:40.726] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2301716339 trigger_emit_ticks=2302100713 +[2026-05-03 07:10:40.728] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2301716339 45251389299 trigger_emit_ticks 2302100713 45251773673 +[2026-05-03 07:10:40.729] [info] [homing.cpp:266] [1969] endstop_name probe tt 378.49222683429804 trigger_time 378.49222683429804 move_end_print_time 378.74433995833334 +[2026-05-03 07:10:40.729] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -415 trig_steps -414 start_pos -19926 trig_pos -20340 halt_pos -20341 +[2026-05-03 07:10:41.655] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.22519999990709 135.54986000004982 -0.05919695747028572 spos -0.05941799999725106 probing_z -0.26441799999724735 +[2026-05-03 07:10:41.656] [info] [gcode.cpp:559] [1969] probe at 60.225,135.550 is z=-0.059197 +[2026-05-03 07:10:41.658] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4746873749999736 +[2026-05-03 07:10:41.659] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 60.22519999990709 135.54986000004982 -0.0545842359956571 +[2026-05-03 07:10:41.660] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:10:41.661] [info] [probe.cpp:857] [1969] _move_next 27 probe_points.size 49 + +[2026-05-03 07:10:41.670] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 170.39404000000593 +[2026-05-03 07:10:41.670] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -100.7181400001516 +[2026-05-03 07:10:41.670] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000028716 +[2026-05-03 07:10:42.918] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:42.919] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:42.933] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2570133415 trigger_emit_ticks=2570517862 +[2026-05-03 07:10:42.934] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2570133415 45519806375 trigger_emit_ticks 2570517862 45520190822 +[2026-05-03 07:10:42.935] [info] [homing.cpp:266] [1969] endstop_name probe tt 380.7290709904341 trigger_time 380.7290709904341 move_end_print_time 380.98163129166664 +[2026-05-03 07:10:42.935] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1296 trig_steps -1293 start_pos -19034 trig_pos -20327 halt_pos -20330 +[2026-05-03 07:10:43.817] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.83794999992716 135.55609000007877 -0.05742364167969735 spos -0.056917999997125435 probing_z -0.23191799999712837 +[2026-05-03 07:10:43.818] [info] [gcode.cpp:559] [1969] probe at 34.838,135.556 is z=-0.057424 +[2026-05-03 07:10:43.819] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.157625583999959 +[2026-05-03 07:10:43.820] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 170.39404000000593 +[2026-05-03 07:10:43.820] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -100.7181400001516 +[2026-05-03 07:10:43.820] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7605820000028609 +[2026-05-03 07:10:44.316] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:44.316] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:44.843] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2737869459 trigger_emit_ticks=2738253833 +[2026-05-03 07:10:44.844] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2737869459 45687542419 trigger_emit_ticks 2738253833 45687926793 +[2026-05-03 07:10:44.845] [info] [homing.cpp:266] [1969] endstop_name probe tt 382.1268926631602 trigger_time 382.1268926631602 move_end_print_time 382.38019504166664 +[2026-05-03 07:10:44.845] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -414 trig_steps -412 start_pos -19930 trig_pos -20342 halt_pos -20344 +[2026-05-03 07:10:45.589] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.83794999992716 135.55609000007877 -0.06609825760477056 spos -0.06691799999714476 probing_z -0.2694179999971391 +[2026-05-03 07:10:45.590] [info] [gcode.cpp:559] [1969] probe at 34.838,135.556 is z=-0.066098 +[2026-05-03 07:10:45.591] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.7715420010000003 +[2026-05-03 07:10:45.592] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 170.39404000000593 +[2026-05-03 07:10:45.592] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -100.7181400001516 +[2026-05-03 07:10:45.592] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7255820000028508 +[2026-05-03 07:10:46.081] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:46.081] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:46.096] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2949771305 trigger_emit_ticks=2950155679 +[2026-05-03 07:10:46.098] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2949771305 45899444265 trigger_emit_ticks 2950155679 45899828639 +[2026-05-03 07:10:46.099] [info] [homing.cpp:266] [1969] endstop_name probe tt 383.8927691047031 trigger_time 383.8927691047031 move_end_print_time 384.1447480416667 +[2026-05-03 07:10:46.099] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -19944 trig_pos -20343 halt_pos -20344 +[2026-05-03 07:10:47.044] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.83794999992716 135.55609000007877 -0.06833756926585227 spos -0.0694179999971496 probing_z -0.2719179999971493 +[2026-05-03 07:10:47.044] [info] [gcode.cpp:559] [1969] probe at 34.838,135.556 is z=-0.068338 +[2026-05-03 07:10:47.045] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4540874180000287 +[2026-05-03 07:10:47.045] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 34.83794999992716 135.55609000007877 -0.06395315618344007 +[2026-05-03 07:10:47.046] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:10:47.046] [info] [probe.cpp:857] [1969] _move_next 28 probe_points.size 49 + +[2026-05-03 07:10:47.055] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 195.5258599999574 +[2026-05-03 07:10:47.056] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -125.8499600001604 +[2026-05-03 07:10:47.056] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000029697 +[2026-05-03 07:10:48.307] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:48.308] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:10:48.307] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:48.334] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3216844095 trigger_emit_ticks=3217228469 +[2026-05-03 07:10:48.337] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3216844095 46166517055 trigger_emit_ticks 3217228469 46166901429 +[2026-05-03 07:10:48.338] [info] [homing.cpp:266] [1969] endstop_name probe tt 386.1184094380223 trigger_time 386.1184094380223 move_end_print_time 386.37253008333334 +[2026-05-03 07:10:48.338] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1302 trig_steps -1301 start_pos -19034 trig_pos -20335 halt_pos -20336 +[2026-05-03 07:10:49.221] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.8379499998985 160.68791000005888 -0.07443166586458713 spos -0.07441799999703136 probing_z -0.25191799999703024 +[2026-05-03 07:10:49.222] [info] [gcode.cpp:559] [1969] probe at 34.838,160.688 is z=-0.074432 +[2026-05-03 07:10:49.223] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.1758126259999813 +[2026-05-03 07:10:49.224] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 195.5258599999574 +[2026-05-03 07:10:49.224] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -125.84996000016038 +[2026-05-03 07:10:49.224] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7455820000029596 +[2026-05-03 07:10:49.733] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:49.733] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:49.759] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3387745307 trigger_emit_ticks=3388129683 +[2026-05-03 07:10:49.761] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3387745307 46337418267 trigger_emit_ticks 3388129683 46337802643 +[2026-05-03 07:10:49.762] [info] [homing.cpp:266] [1969] endstop_name probe tt 387.5426076792227 trigger_time 387.5426076792227 move_end_print_time 387.80619966666666 +[2026-05-03 07:10:49.762] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -418 trig_steps -412 start_pos -19936 trig_pos -20348 halt_pos -20354 +[2026-05-03 07:10:50.692] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.837949999898505 160.68791000005888 -0.07826074096723928 spos -0.07941799999704102 probing_z -0.2844179999970404 +[2026-05-03 07:10:50.693] [info] [gcode.cpp:559] [1969] probe at 34.838,160.688 is z=-0.078261 +[2026-05-03 07:10:50.695] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.471755542999972 +[2026-05-03 07:10:50.696] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 195.5258599999574 +[2026-05-03 07:10:50.696] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -125.84996000016037 +[2026-05-03 07:10:50.696] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7005820000029495 +[2026-05-03 07:10:51.184] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:51.184] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:51.199] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3562567417 +[2026-05-03 07:10:51.201] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 47244640256 trigger_emit_ticks 3562567417 46512240377 +[2026-05-03 07:10:51.202] [info] [homing.cpp:266] [1969] endstop_name probe tt 388.99627772899765 trigger_time 388.99627772899765 move_end_print_time 389.247969125 +[2026-05-03 07:10:51.202] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -399 trig_steps -398 start_pos -19954 trig_pos -20352 halt_pos -20353 +[2026-05-03 07:10:52.029] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.83794999989851 160.68791000005888 -0.07878453103550459 spos -0.07941799999704813 probing_z -0.29441799999705054 +[2026-05-03 07:10:52.030] [info] [gcode.cpp:559] [1969] probe at 34.838,160.688 is z=-0.078785 +[2026-05-03 07:10:52.030] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3356012090000036 +[2026-05-03 07:10:52.031] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 34.837949999898505 160.68791000005888 -0.07715897928911034 +[2026-05-03 07:10:52.031] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:10:52.032] [info] [probe.cpp:857] [1969] _move_next 29 probe_points.size 49 + +[2026-05-03 07:10:52.041] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 220.90687999990837 +[2026-05-03 07:10:52.042] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -100.45648000015149 +[2026-05-03 07:10:52.042] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000003068 +[2026-05-03 07:10:52.635] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:4 is_failure:true +[2026-05-03 07:10:52.971] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3562567417 +[2026-05-03 07:10:52.973] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 47244640256 trigger_emit_ticks 3562567417 46512240377 +[2026-05-03 07:10:52.975] [info] [homing.cpp:266] [1969] endstop_name probe tt 390.699257 trigger_time 0 move_end_print_time 390.699257 +[2026-05-03 07:10:52.975] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1 trig_steps -1 start_pos -19034 trig_pos -19035 halt_pos -19035 +[2026-05-03 07:10:52.977] [error] [homing.cpp:345] [1969] Error during homing probe: [error_code 803] CommandError: LOAD_CELL_ERROR_TIMEOUT +[2026-05-03 07:10:52.977] [error] [load_cell_probe.cpp:469] [1969] probing_move failed +[2026-05-03 07:10:52.978] [warning] [load_cell_probe.cpp:275] [1969] single_tap failed: [error_code 803] CommandError: Error during homing probe: [error_code 803] CommandError: LOAD_CELL_ERROR_TIMEOUT +[2026-05-03 07:10:52.978] [error] [load_cell_probe.cpp:312] [1969] retries 0 samples_retries 20 +[2026-05-03 07:10:52.978] [info] [load_cell_probe.cpp:333] [1969] run_probe time 0.9457390840000244 +[2026-05-03 07:10:52.980] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 220.90687999990837 +[2026-05-03 07:10:52.980] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -100.45648000015149 +[2026-05-03 07:10:52.980] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.9980820000032242 +[2026-05-03 07:10:54.290] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:54.290] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:54.305] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3934822503 trigger_emit_ticks=3935206879 +[2026-05-03 07:10:54.307] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3934822503 46884495463 trigger_emit_ticks 3935206879 46884879839 +[2026-05-03 07:10:54.308] [info] [homing.cpp:266] [1969] endstop_name probe tt 392.10165435155 trigger_time 392.10165435155 move_end_print_time 392.35406858333334 +[2026-05-03 07:10:54.308] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1691 trig_steps -1690 start_pos -18635 trig_pos -20325 halt_pos -20326 +[2026-05-03 07:10:55.247] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.22519999987844 160.68168000002993 -0.052817761856815054 spos -0.051917999996781816 probing_z -0.22691799999677542 +[2026-05-03 07:10:55.248] [info] [gcode.cpp:559] [1969] probe at 60.225,160.682 is z=-0.052818 +[2026-05-03 07:10:55.249] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.270663376000016 +[2026-05-03 07:10:55.251] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 220.90687999990837 +[2026-05-03 07:10:55.251] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -100.45648000015149 +[2026-05-03 07:10:55.251] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7705820000032135 +[2026-05-03 07:10:55.757] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:55.759] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:55.781] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4110891177 trigger_emit_ticks=4111275576 +[2026-05-03 07:10:55.783] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 4110891177 47060564137 trigger_emit_ticks 4111275576 47060948536 +[2026-05-03 07:10:55.785] [info] [homing.cpp:266] [1969] endstop_name probe tt 393.56891578386654 trigger_time 393.56891578386654 move_end_print_time 393.8290451666667 +[2026-05-03 07:10:55.785] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -411 trig_steps -410 start_pos -19926 trig_pos -20336 halt_pos -20337 +[2026-05-03 07:10:56.713] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.22519999987844 160.68168000002993 -0.054725607306771645 spos -0.05441799999678665 probing_z -0.2544179999967864 +[2026-05-03 07:10:56.713] [info] [gcode.cpp:559] [1969] probe at 60.225,160.682 is z=-0.054726 +[2026-05-03 07:10:56.714] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4648301670000023 +[2026-05-03 07:10:56.715] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 220.90687999990837 +[2026-05-03 07:10:56.715] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -100.45648000015149 +[2026-05-03 07:10:56.716] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7430820000032032 +[2026-05-03 07:10:57.207] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:57.207] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:57.221] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4284758493 trigger_emit_ticks=4285142890 +[2026-05-03 07:10:57.223] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 4284758493 47234431453 trigger_emit_ticks 4285142890 47234815850 +[2026-05-03 07:10:57.225] [info] [homing.cpp:266] [1969] endstop_name probe tt 395.01783233923817 trigger_time 395.01783233923817 move_end_print_time 395.2709760833333 +[2026-05-03 07:10:57.225] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -404 trig_steps -402 start_pos -19937 trig_pos -20339 halt_pos -20341 +[2026-05-03 07:10:58.155] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.22519999987844 160.68168000002993 -0.05862179141642618 spos -0.05941799999680342 probing_z -0.2619179999967969 +[2026-05-03 07:10:58.156] [info] [gcode.cpp:559] [1969] probe at 60.225,160.682 is z=-0.058622 +[2026-05-03 07:10:58.157] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4432610000000068 +[2026-05-03 07:10:58.158] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 60.22519999987844 160.68168000002993 -0.055388386860004295 +[2026-05-03 07:10:58.158] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:10:58.159] [info] [probe.cpp:857] [1969] _move_next 30 probe_points.size 49 + +[2026-05-03 07:10:58.168] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 246.30035999985932 +[2026-05-03 07:10:58.168] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -75.06300000014261 +[2026-05-03 07:10:58.168] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000033223 +[2026-05-03 07:10:59.416] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:10:59.417] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:10:59.431] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=254968805 trigger_emit_ticks=255353179 +[2026-05-03 07:10:59.433] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 254968805 47499609061 trigger_emit_ticks 255353179 47499993435 +[2026-05-03 07:10:59.433] [info] [homing.cpp:266] [1969] endstop_name probe tt 397.2276795841307 trigger_time 397.2276795841307 move_end_print_time 397.4809089583333 +[2026-05-03 07:10:59.434] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1295 trig_steps -1294 start_pos -19034 trig_pos -20328 halt_pos -20329 +[2026-05-03 07:11:00.315] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61867999985836 160.68168000000097 -0.0720630344582189 spos -0.07191799999667836 probing_z -0.23441799999667756 +[2026-05-03 07:11:00.316] [info] [gcode.cpp:559] [1969] probe at 85.619,160.682 is z=-0.072063 +[2026-05-03 07:11:00.316] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.1566167510000014 +[2026-05-03 07:11:00.317] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 246.3003599998593 +[2026-05-03 07:11:00.318] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -75.06300000014258 +[2026-05-03 07:11:00.318] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7630820000033115 +[2026-05-03 07:11:00.818] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:00.818] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:00.833] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=423093265 trigger_emit_ticks=423477641 +[2026-05-03 07:11:00.835] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 423093265 47667733521 trigger_emit_ticks 423477641 47668117897 +[2026-05-03 07:11:00.836] [info] [homing.cpp:266] [1969] endstop_name probe tt 398.628738787082 trigger_time 398.628738787082 move_end_print_time 398.88231966666666 +[2026-05-03 07:11:00.836] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -419 trig_steps -415 start_pos -19929 trig_pos -20344 halt_pos -20348 +[2026-05-03 07:11:01.667] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61867999985836 160.68168000000094 -0.0792073439337227 spos -0.07941799999668575 probing_z -0.2744179999966886 +[2026-05-03 07:11:01.667] [info] [gcode.cpp:559] [1969] probe at 85.619,160.682 is z=-0.079207 +[2026-05-03 07:11:01.669] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3522973759999672 +[2026-05-03 07:11:01.670] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 246.3003599998593 +[2026-05-03 07:11:01.670] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -75.06300000014258 +[2026-05-03 07:11:01.670] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7155820000033012 +[2026-05-03 07:11:02.158] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:02.158] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:02.173] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=583938437 trigger_emit_ticks=584313437 +[2026-05-03 07:11:02.177] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 583938437 47828578693 trigger_emit_ticks 584313437 47828953693 +[2026-05-03 07:11:02.178] [info] [homing.cpp:266] [1969] endstop_name probe tt 399.96905747863275 trigger_time 399.96905747863275 move_end_print_time 400.2212973333333 +[2026-05-03 07:11:02.178] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -399 trig_steps -397 start_pos -19948 trig_pos -20345 halt_pos -20347 +[2026-05-03 07:11:03.105] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61867999985836 160.68168000000094 -0.0790169516416333 spos -0.07941799999669996 probing_z -0.27691799999669886 +[2026-05-03 07:11:03.105] [info] [gcode.cpp:559] [1969] probe at 85.619,160.682 is z=-0.079017 +[2026-05-03 07:11:03.107] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.438291042000003 +[2026-05-03 07:11:03.108] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 85.61867999985834 160.68168000000094 -0.07676244334452496 +[2026-05-03 07:11:03.108] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:11:03.109] [info] [probe.cpp:857] [1969] _move_next 31 probe_points.size 49 + +[2026-05-03 07:11:03.119] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 271.69383999988185 +[2026-05-03 07:11:03.119] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -49.681980000133706 +[2026-05-03 07:11:03.119] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.00058200000342 +[2026-05-03 07:11:04.368] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:04.369] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:04.390] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=849185379 trigger_emit_ticks=849569755 +[2026-05-03 07:11:04.392] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 849185379 48093825635 trigger_emit_ticks 849569755 48094210011 +[2026-05-03 07:11:04.393] [info] [homing.cpp:266] [1969] endstop_name probe tt 402.17955967913576 trigger_time 402.17955967913576 move_end_print_time 402.433232875 +[2026-05-03 07:11:04.393] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1299 trig_steps -1297 start_pos -19034 trig_pos -20331 halt_pos -20333 +[2026-05-03 07:11:05.278] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.00592999987407 160.68791000000778 -0.0715428764082495 spos -0.07191799999657889 probing_z -0.24191799999658015 +[2026-05-03 07:11:05.279] [info] [gcode.cpp:559] [1969] probe at 111.006,160.688 is z=-0.071543 +[2026-05-03 07:11:05.280] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.1702197509999905 +[2026-05-03 07:11:05.281] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 271.69383999988185 +[2026-05-03 07:11:05.281] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -49.68198000013372 +[2026-05-03 07:11:05.281] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7530820000034096 +[2026-05-03 07:11:05.786] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:05.790] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:05.815] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1019315170 trigger_emit_ticks=1019699523 +[2026-05-03 07:11:05.817] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1019315170 48263955426 trigger_emit_ticks 1019699523 48264339779 +[2026-05-03 07:11:05.818] [info] [homing.cpp:266] [1969] endstop_name probe tt 403.59732865661476 trigger_time 403.59732865661476 move_end_print_time 403.860884375 +[2026-05-03 07:11:05.818] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -410 trig_steps -409 start_pos -19933 trig_pos -20342 halt_pos -20343 +[2026-05-03 07:11:06.750] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.00592999987407 160.68791000000778 -0.06655135123782915 spos -0.06691799999659054 probing_z -0.26941799999659033 +[2026-05-03 07:11:06.751] [info] [gcode.cpp:559] [1969] probe at 111.006,160.688 is z=-0.066551 +[2026-05-03 07:11:06.752] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4721097089999944 +[2026-05-03 07:11:06.753] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 271.69383999988185 +[2026-05-03 07:11:06.753] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -49.68198000013372 +[2026-05-03 07:11:06.753] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7280820000033995 +[2026-05-03 07:11:07.240] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:07.241] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:07.255] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1193843082 trigger_emit_ticks=1194227435 +[2026-05-03 07:11:07.256] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1193843082 48438483338 trigger_emit_ticks 1194227435 48438867691 +[2026-05-03 07:11:07.257] [info] [homing.cpp:266] [1969] endstop_name probe tt 405.0517495747614 trigger_time 405.0517495747614 move_end_print_time 405.304082875 +[2026-05-03 07:11:07.257] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -398 trig_steps -397 start_pos -19943 trig_pos -20340 halt_pos -20341 +[2026-05-03 07:11:08.135] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.00592999987407 160.68791000000778 -0.07150835157746457 spos -0.0719179999966002 probing_z -0.26441799999660054 +[2026-05-03 07:11:08.135] [info] [gcode.cpp:559] [1969] probe at 111.006,160.688 is z=-0.071508 +[2026-05-03 07:11:08.136] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3837518759999625 +[2026-05-03 07:11:08.136] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 111.00592999987407 160.68791000000778 -0.06986752640784774 +[2026-05-03 07:11:08.137] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:11:08.137] [info] [probe.cpp:857] [1969] _move_next 32 probe_points.size 49 + +[2026-05-03 07:11:08.146] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 297.0748599999486 +[2026-05-03 07:11:08.146] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -24.28850000012924 +[2026-05-03 07:11:08.146] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000035186 +[2026-05-03 07:11:09.397] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:09.398] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:09.410] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1452664117 trigger_emit_ticks=1453048491 +[2026-05-03 07:11:09.413] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1452664117 48697304373 trigger_emit_ticks 1453048491 48697688747 +[2026-05-03 07:11:09.413] [info] [homing.cpp:266] [1969] endstop_name probe tt 407.2086235227834 trigger_time 407.2086235227834 move_end_print_time 407.46036941666665 +[2026-05-03 07:11:09.414] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1300 trig_steps -1299 start_pos -19034 trig_pos -20333 halt_pos -20334 +[2026-05-03 07:11:10.302] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39317999990968 160.68168000003894 -0.08017346073403872 spos -0.0794179999964797 probing_z -0.24691799999648145 +[2026-05-03 07:11:10.303] [info] [gcode.cpp:559] [1969] probe at 136.393,160.682 is z=-0.080173 +[2026-05-03 07:11:10.304] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.165595751000012 +[2026-05-03 07:11:10.305] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 297.07485999994856 +[2026-05-03 07:11:10.305] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -24.28850000012929 +[2026-05-03 07:11:10.305] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7505820000035084 +[2026-05-03 07:11:10.815] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:10.817] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:10.837] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1622299787 trigger_emit_ticks=1622684184 +[2026-05-03 07:11:10.839] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1622299787 48866940043 trigger_emit_ticks 1622684184 48867324440 +[2026-05-03 07:11:10.840] [info] [homing.cpp:266] [1969] endstop_name probe tt 408.6222742263243 trigger_time 408.6222742263243 move_end_print_time 408.8848017083333 +[2026-05-03 07:11:10.841] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -419 trig_steps -410 start_pos -19934 trig_pos -20344 halt_pos -20353 +[2026-05-03 07:11:11.770] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39317999990965 160.6816800000389 -0.08457527069275733 spos -0.08441799999649646 probing_z -0.2744179999964915 +[2026-05-03 07:11:11.771] [info] [gcode.cpp:559] [1969] probe at 136.393,160.682 is z=-0.084575 +[2026-05-03 07:11:11.771] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4677406260000225 +[2026-05-03 07:11:11.773] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 297.07485999994856 +[2026-05-03 07:11:11.773] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -24.28850000012926 +[2026-05-03 07:11:11.773] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7030820000034981 +[2026-05-03 07:11:12.259] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:12.261] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:12.274] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1796150398 trigger_emit_ticks=1796534751 +[2026-05-03 07:11:12.276] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1796150398 49040790654 trigger_emit_ticks 1796534751 49041175007 +[2026-05-03 07:11:12.277] [info] [homing.cpp:266] [1969] endstop_name probe tt 410.0710488830819 trigger_time 410.0710488830819 move_end_print_time 410.3230780416667 +[2026-05-03 07:11:12.278] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -397 trig_steps -396 start_pos -19953 trig_pos -20349 halt_pos -20350 +[2026-05-03 07:11:13.108] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39317999990965 160.6816800000389 -0.08760257225167672 spos -0.0869179999965013 probing_z -0.2869179999965019 +[2026-05-03 07:11:13.109] [info] [gcode.cpp:559] [1969] probe at 136.393,160.682 is z=-0.087603 +[2026-05-03 07:11:13.110] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3381059170000071 +[2026-05-03 07:11:13.110] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 136.39317999990965 160.6816800000389 -0.0841171012261576 +[2026-05-03 07:11:13.110] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:11:13.111] [info] [probe.cpp:857] [1969] _move_next 33 probe_points.size 49 + +[2026-05-03 07:11:13.114] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:11:13.114] [info] [gcode_move.cpp:52] [1969] G180 select 915 +[2026-05-03 07:11:13.116] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.125] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.126] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.128] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.130] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.131] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.133] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.134] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.136] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.137] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.139] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.141] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.142] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.144] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.145] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.146] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.149] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.151] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.153] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.155] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.156] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.158] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.220] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.283] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.345] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.408] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.470] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.532] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.594] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.657] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.719] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.782] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.844] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.906] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:13.969] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:14.031] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:14.093] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:14.156] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:14.218] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:14.281] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:14.342] [info] [gcode_move.cpp:772] [1969] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 07:11:14.344] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 322.46834000001536 +[2026-05-03 07:11:14.344] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 1.1049799998696588 +[2026-05-03 07:11:14.344] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 5.000582000003574 +[2026-05-03 07:11:17.394] [info] [clocksync.cpp:212] [2024] mcu 'bed_sensor': Ignoring clock sample: sent_time=440.634396334,time_avg=410.9715756236267,freq=119998191.70778063,diff=64156.50720214844(0.0005346375600179036),stddev=2315.260030682221 +[2026-05-03 07:11:17.450] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:17.450] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:17.469] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2419068921 trigger_emit_ticks=2419453297 +[2026-05-03 07:11:17.471] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2419068921 49663709177 trigger_emit_ticks 2419453297 49664093553 +[2026-05-03 07:11:17.472] [info] [homing.cpp:266] [1969] endstop_name probe tt 415.26211299517433 trigger_time 415.26211299517433 move_end_print_time 415.51399695833334 +[2026-05-03 07:11:17.473] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -2111 trig_steps -2110 start_pos -18234 trig_pos -20344 halt_pos -20345 +[2026-05-03 07:11:18.411] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.78665999994251 160.68168000007284 -0.1053441380904791 spos -0.10441799999642143 probing_z -0.2744179999964267 +[2026-05-03 07:11:18.412] [info] [gcode.cpp:559] [1969] probe at 161.787,160.682 is z=-0.105344 +[2026-05-03 07:11:18.413] [info] [load_cell_probe.cpp:333] [1969] run_probe time 4.07013733499997 +[2026-05-03 07:11:18.414] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 322.46834000001536 +[2026-05-03 07:11:18.414] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 1.1049799998696699 +[2026-05-03 07:11:18.414] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7230820000035636 +[2026-05-03 07:11:18.906] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:18.920] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2593693147 trigger_emit_ticks=2594077521 +[2026-05-03 07:11:18.923] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2593693147 49838333403 trigger_emit_ticks 2594077521 49838717777 +[2026-05-03 07:11:18.925] [info] [homing.cpp:266] [1969] endstop_name probe tt 416.7173360784909 trigger_time 416.7173360784909 move_end_print_time 416.9696085 +[2026-05-03 07:11:18.925] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -407 trig_steps -406 start_pos -19945 trig_pos -20351 halt_pos -20352 +[2026-05-03 07:11:19.802] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.78665999994251 160.68168000007284 -0.11027018586354526 spos -0.10941799999643109 probing_z -0.29191799999643653 +[2026-05-03 07:11:19.803] [info] [gcode.cpp:559] [1969] probe at 161.787,160.682 is z=-0.110270 +[2026-05-03 07:11:19.804] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.390632126000014 +[2026-05-03 07:11:19.805] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 322.46834000001536 +[2026-05-03 07:11:19.805] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 1.1049799998696699 +[2026-05-03 07:11:19.805] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7055820000035533 +[2026-05-03 07:11:20.296] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:20.297] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:20.310] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=2760750345 +[2026-05-03 07:11:20.312] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 51539607552 trigger_emit_ticks 2760750345 50005390601 +[2026-05-03 07:11:20.313] [info] [homing.cpp:266] [1969] endstop_name probe tt 418.1062964138398 trigger_time 418.1062964138398 move_end_print_time 418.36031341666666 +[2026-05-03 07:11:20.314] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -406 trig_steps -402 start_pos -19952 trig_pos -20354 halt_pos -20358 +[2026-05-03 07:11:21.256] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.78665999994251 160.68168000007284 -0.11365746447570707 spos -0.11441799999644786 probing_z -0.2994179999964468 +[2026-05-03 07:11:21.257] [info] [gcode.cpp:559] [1969] probe at 161.787,160.682 is z=-0.113657 +[2026-05-03 07:11:21.258] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4538141259999975 +[2026-05-03 07:11:21.258] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 161.78665999994251 160.68168000007284 -0.10975726280991048 +[2026-05-03 07:11:21.258] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:11:21.259] [info] [probe.cpp:857] [1969] _move_next 34 probe_points.size 49 + +[2026-05-03 07:11:21.267] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 347.86182000008216 +[2026-05-03 07:11:21.267] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 26.498459999868107 +[2026-05-03 07:11:21.268] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000036714 +[2026-05-03 07:11:22.525] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:22.526] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:22.541] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3027901443 trigger_emit_ticks=3028285817 +[2026-05-03 07:11:22.543] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3027901443 50272541699 trigger_emit_ticks 3028285817 50272926073 +[2026-05-03 07:11:22.544] [info] [homing.cpp:266] [1969] endstop_name probe tt 420.3357906560051 trigger_time 420.3357906560051 move_end_print_time 420.58939108333334 +[2026-05-03 07:11:22.544] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1308 trig_steps -1306 start_pos -19034 trig_pos -20340 halt_pos -20342 +[2026-05-03 07:11:23.426] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.18013999997513 160.68168000010704 -0.10530922773736637 spos -0.10441799999632195 probing_z -0.26441799999632876 +[2026-05-03 07:11:23.426] [info] [gcode.cpp:559] [1969] probe at 187.180,160.682 is z=-0.105309 +[2026-05-03 07:11:23.427] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.1676061679999634 +[2026-05-03 07:11:23.428] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 347.86182000008216 +[2026-05-03 07:11:23.429] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 26.49845999986806 +[2026-05-03 07:11:23.429] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7305820000036611 +[2026-05-03 07:11:23.924] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:23.925] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:23.939] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3195918443 trigger_emit_ticks=3196302819 +[2026-05-03 07:11:23.940] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3195918443 50440558699 trigger_emit_ticks 3196302819 50440943075 +[2026-05-03 07:11:23.942] [info] [homing.cpp:266] [1969] endstop_name probe tt 421.73595389923355 trigger_time 421.73595389923355 move_end_print_time 421.98761270833336 +[2026-05-03 07:11:23.942] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -414 trig_steps -413 start_pos -19942 trig_pos -20355 halt_pos -20356 +[2026-05-03 07:11:24.771] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.1801399999751 160.68168000010706 -0.11356330342074789 spos -0.11441799999634128 probing_z -0.30191799999633884 +[2026-05-03 07:11:24.772] [info] [gcode.cpp:559] [1969] probe at 187.180,160.682 is z=-0.113563 +[2026-05-03 07:11:24.773] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3459126250000395 +[2026-05-03 07:11:24.774] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 347.86182000008216 +[2026-05-03 07:11:24.775] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 26.498459999868032 +[2026-05-03 07:11:24.775] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.695582000003651 +[2026-05-03 07:11:25.263] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:25.263] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:25.278] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3356559211 trigger_emit_ticks=3356943685 +[2026-05-03 07:11:25.279] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3356559211 50601199467 trigger_emit_ticks 3356943685 50601583941 +[2026-05-03 07:11:25.280] [info] [homing.cpp:266] [1969] endstop_name probe tt 423.0746501716554 trigger_time 423.0746501716554 move_end_print_time 423.32679516666667 +[2026-05-03 07:11:25.280] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -399 trig_steps -398 start_pos -19956 trig_pos -20354 halt_pos -20355 +[2026-05-03 07:11:26.114] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.1801399999751 160.68168000010706 -0.11203758679456549 spos -0.11191799999634355 probing_z -0.299417999996349 +[2026-05-03 07:11:26.114] [info] [gcode.cpp:559] [1969] probe at 187.180,160.682 is z=-0.112038 +[2026-05-03 07:11:26.115] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3413448759999937 +[2026-05-03 07:11:26.115] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 187.18013999997507 160.68168000010706 -0.11030337265089325 +[2026-05-03 07:11:26.116] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:11:26.116] [info] [probe.cpp:857] [1969] _move_next 35 probe_points.size 49 + +[2026-05-03 07:11:26.125] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 372.9936400001483 +[2026-05-03 07:11:26.125] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 1.3666399998695922 +[2026-05-03 07:11:26.125] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000037695 +[2026-05-03 07:11:27.373] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:27.374] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:27.394] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3609554527 trigger_emit_ticks=3609938903 +[2026-05-03 07:11:27.396] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3609554527 50854194783 trigger_emit_ticks 3609938903 50854579159 +[2026-05-03 07:11:27.397] [info] [homing.cpp:266] [1969] endstop_name probe tt 425.18297799267026 trigger_time 425.18297799267026 move_end_print_time 425.43687916666664 +[2026-05-03 07:11:27.397] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1292 trig_steps -1288 start_pos -19034 trig_pos -20322 halt_pos -20326 +[2026-05-03 07:11:28.279] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.18014000000895 185.81350000013933 -0.0597039318527752 spos -0.05941799999623498 probing_z -0.21941799999623068 +[2026-05-03 07:11:28.280] [info] [gcode.cpp:559] [1969] probe at 187.180,185.814 is z=-0.059704 +[2026-05-03 07:11:28.281] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.164135708999993 +[2026-05-03 07:11:28.282] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 372.9936400001482 +[2026-05-03 07:11:28.282] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 1.3666399998696193 +[2026-05-03 07:11:28.282] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7705820000037589 +[2026-05-03 07:11:28.776] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:28.776] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:28.793] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3778151956 trigger_emit_ticks=3778526933 +[2026-05-03 07:11:28.805] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3778151956 trigger_emit_ticks=3778526933 +[2026-05-03 07:11:28.807] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3778151956 51022792212 trigger_emit_ticks 3778526933 51023167189 +[2026-05-03 07:11:28.808] [info] [homing.cpp:266] [1969] endstop_name probe tt 426.5878997447132 trigger_time 426.5878997447132 move_end_print_time 426.84014225 +[2026-05-03 07:11:28.808] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -412 trig_steps -411 start_pos -19926 trig_pos -20337 halt_pos -20338 +[2026-05-03 07:11:29.638] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.18014000000892 185.8135000001393 -0.0686091128664443 spos -0.0694179999962401 probing_z -0.2569179999962412 +[2026-05-03 07:11:29.639] [info] [gcode.cpp:559] [1969] probe at 187.180,185.814 is z=-0.068609 +[2026-05-03 07:11:29.640] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3584041670000033 +[2026-05-03 07:11:29.641] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 372.9936400001482 +[2026-05-03 07:11:29.641] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 1.3666399998696193 +[2026-05-03 07:11:29.641] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7405820000037486 +[2026-05-03 07:11:30.129] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:30.129] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:30.143] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3940422907 trigger_emit_ticks=3940797907 +[2026-05-03 07:11:30.145] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3940422907 51185063163 trigger_emit_ticks 3940797907 51185438163 +[2026-05-03 07:11:30.146] [info] [homing.cpp:266] [1969] endstop_name probe tt 427.9401784914601 trigger_time 427.9401784914601 move_end_print_time 428.19255254166666 +[2026-05-03 07:11:30.146] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -400 trig_steps -398 start_pos -19938 trig_pos -20336 halt_pos -20338 +[2026-05-03 07:11:30.976] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.18014000000892 185.8135000001393 -0.06512179505853075 spos -0.06441799999625175 probing_z -0.25441799999625136 +[2026-05-03 07:11:30.977] [info] [gcode.cpp:559] [1969] probe at 187.180,185.814 is z=-0.065122 +[2026-05-03 07:11:30.977] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.337711583999976 +[2026-05-03 07:11:30.978] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 187.18014000000892 185.81350000013927 -0.06447827992591675 +[2026-05-03 07:11:30.978] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:11:30.979] [info] [probe.cpp:857] [1969] _move_next 36 probe_points.size 49 + +[2026-05-03 07:11:30.987] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 347.6001600000814 +[2026-05-03 07:11:30.987] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -24.026840000129354 +[2026-05-03 07:11:30.988] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000003868 +[2026-05-03 07:11:32.167] [info] [clocksync.cpp:199] [2026] mcu 'toolhead': New minimum RTT: sent_time=455.407902175,half_rtt=0.0002430834999813669,freq=119998358.38745083 +[2026-05-03 07:11:32.232] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:32.232] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:32.246] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4192837351 trigger_emit_ticks=4193221725 +[2026-05-03 07:11:32.248] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 4192837351 51437477607 trigger_emit_ticks 4193221725 51437861981 +[2026-05-03 07:11:32.249] [info] [homing.cpp:266] [1969] endstop_name probe tt 430.04374219672536 trigger_time 430.04374219672536 move_end_print_time 430.2958565416667 +[2026-05-03 07:11:32.249] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1289 trig_steps -1287 start_pos -19034 trig_pos -20321 halt_pos -20323 +[2026-05-03 07:11:33.131] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.78665999997602 185.8135000001054 -0.051557963031160864 spos -0.05191799999612812 probing_z -0.21691799999613215 +[2026-05-03 07:11:33.132] [info] [gcode.cpp:559] [1969] probe at 161.787,185.814 is z=-0.051558 +[2026-05-03 07:11:33.133] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.1532625429999825 +[2026-05-03 07:11:33.134] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 347.60016000008136 +[2026-05-03 07:11:33.134] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -24.02684000012934 +[2026-05-03 07:11:33.134] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7780820000038571 +[2026-05-03 07:11:33.631] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:33.632] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:33.648] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=65606931 trigger_emit_ticks=65991305 +[2026-05-03 07:11:33.650] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 65606931 51605214483 trigger_emit_ticks 65991305 51605598857 +[2026-05-03 07:11:33.651] [info] [homing.cpp:266] [1969] endstop_name probe tt 431.441570204071 trigger_time 431.441570204071 move_end_print_time 431.69468870833333 +[2026-05-03 07:11:33.652] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -416 trig_steps -415 start_pos -19923 trig_pos -20338 halt_pos -20339 +[2026-05-03 07:11:34.477] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.786659999976 185.81350000010536 -0.06030740181996272 spos -0.05941799999614261 probing_z -0.259417999996143 +[2026-05-03 07:11:34.477] [info] [gcode.cpp:559] [1969] probe at 161.787,185.814 is z=-0.060307 +[2026-05-03 07:11:34.478] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3452781259999824 +[2026-05-03 07:11:34.479] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 347.60016000008136 +[2026-05-03 07:11:34.479] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -24.02684000012937 +[2026-05-03 07:11:34.479] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7380820000038468 +[2026-05-03 07:11:34.970] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:34.970] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:34.983] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=226243583 trigger_emit_ticks=226627959 +[2026-05-03 07:11:34.986] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 226243583 51765851135 trigger_emit_ticks 226627959 51766235511 +[2026-05-03 07:11:34.987] [info] [homing.cpp:266] [1969] endstop_name probe tt 432.7802286970874 trigger_time 432.7802286970874 move_end_print_time 433.03307925 +[2026-05-03 07:11:34.987] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -403 trig_steps -399 start_pos -19939 trig_pos -20338 halt_pos -20342 +[2026-05-03 07:11:35.821] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.786659999976 185.81350000010536 -0.05966618021053802 spos -0.05941799999614972 probing_z -0.2594179999961532 +[2026-05-03 07:11:35.822] [info] [gcode.cpp:559] [1969] probe at 161.787,185.814 is z=-0.059666 +[2026-05-03 07:11:35.823] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.344509749999986 +[2026-05-03 07:11:35.823] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 161.786659999976 185.81350000010536 -0.05717718168722053 +[2026-05-03 07:11:35.823] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:11:35.824] [info] [probe.cpp:857] [1969] _move_next 37 probe_points.size 49 + +[2026-05-03 07:11:35.832] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 322.20668000001456 +[2026-05-03 07:11:35.833] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -49.4203200001337 +[2026-05-03 07:11:35.833] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000003966 +[2026-05-03 07:11:37.080] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:37.080] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:37.095] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=479510021 trigger_emit_ticks=479894395 +[2026-05-03 07:11:37.097] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 479510021 52019117573 trigger_emit_ticks 479894395 52019501947 +[2026-05-03 07:11:37.098] [info] [homing.cpp:266] [1969] endstop_name probe tt 434.8908143275569 trigger_time 434.8908143275569 move_end_print_time 435.1431925 +[2026-05-03 07:11:37.098] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1292 trig_steps -1290 start_pos -19034 trig_pos -20324 halt_pos -20326 +[2026-05-03 07:11:38.032] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39317999994043 185.81350000007413 -0.05967627544707185 spos -0.05941799999603603 probing_z -0.2244179999960343 +[2026-05-03 07:11:38.033] [info] [gcode.cpp:559] [1969] probe at 136.393,185.814 is z=-0.059676 +[2026-05-03 07:11:38.034] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.2089630419999935 +[2026-05-03 07:11:38.036] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 322.20668000001456 +[2026-05-03 07:11:38.036] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -49.42032000013367 +[2026-05-03 07:11:38.036] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7705820000039552 +[2026-05-03 07:11:38.370] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:11:38.533] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:38.533] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:38.548] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=653947801 trigger_emit_ticks=654332175 +[2026-05-03 07:11:38.550] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 653947801 52193555353 trigger_emit_ticks 654332175 52193939727 +[2026-05-03 07:11:38.552] [info] [homing.cpp:266] [1969] endstop_name probe tt 436.34448491127336 trigger_time 436.34448491127336 move_end_print_time 436.59662204166665 +[2026-05-03 07:11:38.552] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -417 trig_steps -416 start_pos -19926 trig_pos -20342 halt_pos -20343 +[2026-05-03 07:11:39.381] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39317999994046 185.8135000000741 -0.06489259937101052 spos -0.06441799999603859 probing_z -0.2694179999960449 +[2026-05-03 07:11:39.381] [info] [gcode.cpp:559] [1969] probe at 136.393,185.814 is z=-0.064893 +[2026-05-03 07:11:39.382] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3479496669999662 +[2026-05-03 07:11:39.383] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 322.20668000001456 +[2026-05-03 07:11:39.383] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -49.42032000013364 +[2026-05-03 07:11:39.383] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.728082000003945 +[2026-05-03 07:11:39.873] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:39.887] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=814684507 trigger_emit_ticks=815068881 +[2026-05-03 07:11:39.889] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 814684507 52354292059 trigger_emit_ticks 815068881 52354676433 +[2026-05-03 07:11:39.890] [info] [homing.cpp:266] [1969] endstop_name probe tt 437.68397731432617 trigger_time 437.68397731432617 move_end_print_time 437.9369805416667 +[2026-05-03 07:11:39.890] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -404 trig_steps -401 start_pos -19943 trig_pos -20344 halt_pos -20347 +[2026-05-03 07:11:40.729] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39317999994046 185.8135000000741 -0.0636979017753509 spos -0.0644179999960528 probing_z -0.274417999996055 +[2026-05-03 07:11:40.729] [info] [gcode.cpp:559] [1969] probe at 136.393,185.814 is z=-0.063698 +[2026-05-03 07:11:40.731] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3487232509999671 +[2026-05-03 07:11:40.731] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 136.39317999994046 185.8135000000741 -0.06275559219781109 +[2026-05-03 07:11:40.731] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:11:40.732] [info] [probe.cpp:857] [1969] _move_next 38 probe_points.size 49 + +[2026-05-03 07:11:40.741] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 296.8256599999478 +[2026-05-03 07:11:40.741] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -74.80134000014252 +[2026-05-03 07:11:40.741] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000004064 +[2026-05-03 07:11:41.987] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:41.988] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:42.001] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1068440079 trigger_emit_ticks=1068824455 +[2026-05-03 07:11:42.003] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1068440079 52608047631 trigger_emit_ticks 1068824455 52608432007 +[2026-05-03 07:11:42.004] [info] [homing.cpp:266] [1969] endstop_name probe tt 439.7986380843664 trigger_time 439.7986380843664 move_end_print_time 440.0511137916667 +[2026-05-03 07:11:42.004] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1289 trig_steps -1288 start_pos -19034 trig_pos -20322 halt_pos -20323 +[2026-05-03 07:11:42.939] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.01215999990264 185.81350000004517 -0.05781554694862387 spos -0.05691799999593172 probing_z -0.21941799999593625 +[2026-05-03 07:11:42.939] [info] [gcode.cpp:559] [1969] probe at 111.012,185.814 is z=-0.057816 +[2026-05-03 07:11:42.940] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.2073887509999963 +[2026-05-03 07:11:42.941] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 296.8256599999478 +[2026-05-03 07:11:42.941] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -74.80134000014255 +[2026-05-03 07:11:42.942] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7780820000040529 +[2026-05-03 07:11:43.438] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:43.438] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:43.454] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=1242979777 +[2026-05-03 07:11:43.455] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 51539607552 trigger_emit_ticks 1242979777 52782587329 +[2026-05-03 07:11:43.456] [info] [homing.cpp:266] [1969] endstop_name probe tt 441.2499544778963 trigger_time 441.2499544778963 move_end_print_time 441.502170375 +[2026-05-03 07:11:43.457] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -418 trig_steps -417 start_pos -19923 trig_pos -20340 halt_pos -20341 +[2026-05-03 07:11:44.289] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.01215999990262 185.81350000004517 -0.0689491849900474 spos -0.06941799999594878 probing_z -0.26441799999594706 +[2026-05-03 07:11:44.290] [info] [gcode.cpp:559] [1969] probe at 111.012,185.814 is z=-0.068949 +[2026-05-03 07:11:44.290] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3499652510000146 +[2026-05-03 07:11:44.292] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 296.8256599999478 +[2026-05-03 07:11:44.292] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -74.80134000014255 +[2026-05-03 07:11:44.292] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7330820000040428 +[2026-05-03 07:11:44.779] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:44.780] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:44.796] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1403429362 trigger_emit_ticks=1403813713 +[2026-05-03 07:11:44.798] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1403429362 52943036914 trigger_emit_ticks 1403813713 52943421265 +[2026-05-03 07:11:44.799] [info] [homing.cpp:266] [1969] endstop_name probe tt 442.5902557595461 trigger_time 442.5902557595461 move_end_print_time 442.8433009166667 +[2026-05-03 07:11:44.799] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -397 trig_steps -396 start_pos -19941 trig_pos -20337 halt_pos -20338 +[2026-05-03 07:11:45.640] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.01215999990262 185.81350000004517 -0.0643110218493251 spos -0.06441799999596043 probing_z -0.2569179999959572 +[2026-05-03 07:11:45.641] [info] [gcode.cpp:559] [1969] probe at 111.012,185.814 is z=-0.064311 +[2026-05-03 07:11:45.642] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3513581679999902 +[2026-05-03 07:11:45.642] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 111.01215999990262 185.81350000004514 -0.06369191792933213 +[2026-05-03 07:11:45.643] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:11:45.644] [info] [probe.cpp:857] [1969] _move_next 39 probe_points.size 49 + +[2026-05-03 07:11:45.652] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 271.432179999881 +[2026-05-03 07:11:45.653] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -100.19482000015142 +[2026-05-03 07:11:45.653] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000004162 +[2026-05-03 07:11:46.898] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:46.899] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:46.913] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1657754226 trigger_emit_ticks=1658138577 +[2026-05-03 07:11:46.915] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1657754226 53197361778 trigger_emit_ticks 1658138577 53197746129 +[2026-05-03 07:11:46.916] [info] [homing.cpp:266] [1969] endstop_name probe tt 444.7096605430165 trigger_time 444.7096605430165 move_end_print_time 444.962783 +[2026-05-03 07:11:46.916] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1291 trig_steps -1290 start_pos -19034 trig_pos -20324 halt_pos -20325 +[2026-05-03 07:11:47.849] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61867999986478 185.8135000000162 -0.0643116625719364 spos -0.06441799999583964 probing_z -0.224417999995838 +[2026-05-03 07:11:47.850] [info] [gcode.cpp:559] [1969] probe at 85.619,185.814 is z=-0.064312 +[2026-05-03 07:11:47.851] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.2064009169999963 +[2026-05-03 07:11:47.852] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 271.432179999881 +[2026-05-03 07:11:47.852] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -100.19482000015142 +[2026-05-03 07:11:47.852] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7730820000041513 +[2026-05-03 07:11:48.363] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:48.364] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:48.392] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1833443091 trigger_emit_ticks=1833827465 +[2026-05-03 07:11:48.394] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1833443091 53373050643 trigger_emit_ticks 1833827465 53373435017 +[2026-05-03 07:11:48.395] [info] [homing.cpp:266] [1969] endstop_name probe tt 446.17375688285676 trigger_time 446.17375688285676 move_end_print_time 446.4327045 +[2026-05-03 07:11:48.395] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -418 trig_steps -415 start_pos -19925 trig_pos -20340 halt_pos -20343 +[2026-05-03 07:11:49.324] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61867999986478 185.8135000000162 -0.0737943783922855 spos -0.07441799999585186 probing_z -0.2644179999958488 +[2026-05-03 07:11:49.325] [info] [gcode.cpp:559] [1969] probe at 85.619,185.814 is z=-0.073794 +[2026-05-03 07:11:49.326] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4747262089999822 +[2026-05-03 07:11:49.327] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 271.432179999881 +[2026-05-03 07:11:49.327] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -100.19482000015142 +[2026-05-03 07:11:49.327] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7280820000041411 +[2026-05-03 07:11:49.813] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:49.813] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:49.830] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2007596735 trigger_emit_ticks=2007971735 +[2026-05-03 07:11:49.832] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2007596735 53547204287 trigger_emit_ticks 2007971735 53547579287 +[2026-05-03 07:11:49.832] [info] [homing.cpp:266] [1969] endstop_name probe tt 447.624981256894 trigger_time 447.624981256894 move_end_print_time 447.87723575 +[2026-05-03 07:11:49.833] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -396 trig_steps -395 start_pos -19943 trig_pos -20338 halt_pos -20339 +[2026-05-03 07:11:50.660] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61867999986478 185.8135000000162 -0.07340530119336894 spos -0.07441799999585896 probing_z -0.2594179999958589 +[2026-05-03 07:11:50.661] [info] [gcode.cpp:559] [1969] probe at 85.619,185.814 is z=-0.073405 +[2026-05-03 07:11:50.662] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3358281669999883 +[2026-05-03 07:11:50.662] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 85.6186799998648 185.8135000000162 -0.07050378071919695 +[2026-05-03 07:11:50.662] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:11:50.663] [info] [probe.cpp:857] [1969] _move_next 40 probe_points.size 49 + +[2026-05-03 07:11:50.665] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:11:50.666] [info] [gcode_move.cpp:52] [1969] G180 select 915 +[2026-05-03 07:11:50.667] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.676] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.677] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.679] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.680] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.682] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.684] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.685] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.687] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.688] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.690] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.691] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.693] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.694] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.696] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.698] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.700] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.701] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.703] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.704] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.706] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.708] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.770] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.832] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.895] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:50.957] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:51.019] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:51.082] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:51.144] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:51.206] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:51.269] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:51.331] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:51.393] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:51.456] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:51.518] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:51.581] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:51.643] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:51.705] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:51.768] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:51.830] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:11:51.893] [info] [gcode_move.cpp:772] [1969] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 07:11:51.894] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 246.03869999985963 +[2026-05-03 07:11:51.894] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -125.5883000001603 +[2026-05-03 07:11:51.894] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 5.000582000004218 +[2026-05-03 07:11:55.001] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:55.001] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:55.019] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2629867011 trigger_emit_ticks=2630251408 +[2026-05-03 07:11:55.033] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2629867011 trigger_emit_ticks=2630251408 +[2026-05-03 07:11:55.034] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2629867011 54169474563 trigger_emit_ticks 2630251408 54169858960 +[2026-05-03 07:11:55.036] [info] [homing.cpp:266] [1969] endstop_name probe tt 452.8107262781893 trigger_time 452.8107262781893 move_end_print_time 453.064602 +[2026-05-03 07:11:55.036] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -2112 trig_steps -2108 start_pos -18234 trig_pos -20342 halt_pos -20346 +[2026-05-03 07:11:55.874] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.225199999849664 185.81350000000998 -0.07480963508868838 spos -0.0744179999957808 probing_z -0.26941799999578286 +[2026-05-03 07:11:55.875] [info] [gcode.cpp:559] [1969] probe at 60.225,185.814 is z=-0.074810 +[2026-05-03 07:11:55.876] [info] [load_cell_probe.cpp:333] [1969] run_probe time 3.9825986270000158 +[2026-05-03 07:11:55.877] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 246.03869999985966 +[2026-05-03 07:11:55.878] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -125.58830000016032 +[2026-05-03 07:11:55.878] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7205820000042071 +[2026-05-03 07:11:56.378] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:56.378] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:56.422] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2795392525 trigger_emit_ticks=2795776901 +[2026-05-03 07:11:56.425] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2795392525 54335000077 trigger_emit_ticks 2795776901 54335384453 +[2026-05-03 07:11:56.425] [info] [homing.cpp:266] [1969] endstop_name probe tt 454.1901274923335 trigger_time 454.1901274923335 move_end_print_time 454.456189875 +[2026-05-03 07:11:56.426] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -402 trig_steps -401 start_pos -19946 trig_pos -20347 halt_pos -20348 +[2026-05-03 07:11:57.364] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.22519999984967 185.81350000000998 -0.07734509665961803 spos -0.07691799999579274 probing_z -0.2819179999957928 +[2026-05-03 07:11:57.365] [info] [gcode.cpp:559] [1969] probe at 60.225,185.814 is z=-0.077345 +[2026-05-03 07:11:57.366] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4895591260000174 +[2026-05-03 07:11:57.367] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 246.03869999985966 +[2026-05-03 07:11:57.367] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -125.5883000001603 +[2026-05-03 07:11:57.367] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7155820000041968 +[2026-05-03 07:11:57.856] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:57.856] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:57.871] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2972686163 trigger_emit_ticks=2973070539 +[2026-05-03 07:11:57.872] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2972686163 54512293715 trigger_emit_ticks 2973070539 54512678091 +[2026-05-03 07:11:57.873] [info] [homing.cpp:266] [1969] endstop_name probe tt 455.66759623735476 trigger_time 455.66759623735476 move_end_print_time 455.9194855833333 +[2026-05-03 07:11:57.873] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -402 trig_steps -401 start_pos -19948 trig_pos -20349 halt_pos -20350 +[2026-05-03 07:11:58.715] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.22519999984968 185.81350000000998 -0.07721607846216333 spos -0.07691799999580695 probing_z -0.28691799999580314 +[2026-05-03 07:11:58.716] [info] [gcode.cpp:559] [1969] probe at 60.225,185.814 is z=-0.077216 +[2026-05-03 07:11:58.716] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3507601260000115 +[2026-05-03 07:11:58.717] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 60.22519999984967 185.81350000000998 -0.07645693673682324 +[2026-05-03 07:11:58.717] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:11:58.718] [info] [probe.cpp:857] [1969] _move_next 41 probe_points.size 49 + +[2026-05-03 07:11:58.727] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 220.6452199999087 +[2026-05-03 07:11:58.727] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -150.98178000011677 +[2026-05-03 07:11:58.727] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000043153 +[2026-05-03 07:11:59.979] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:11:59.979] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:11:59.995] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=3227758973 +[2026-05-03 07:11:59.997] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 55834574848 trigger_emit_ticks 3227758973 54767366525 +[2026-05-03 07:11:59.997] [info] [homing.cpp:266] [1969] endstop_name probe tt 457.7900279902019 trigger_time 457.7900279902019 move_end_print_time 458.0429139166667 +[2026-05-03 07:11:59.998] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1300 trig_steps -1298 start_pos -19034 trig_pos -20332 halt_pos -20334 +[2026-05-03 07:12:00.880] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.83171999989597 185.81350000001274 -0.05258361803554831 spos -0.05191799999568758 probing_z -0.2444179999956848 +[2026-05-03 07:12:00.881] [info] [gcode.cpp:559] [1969] probe at 34.832,185.814 is z=-0.052584 +[2026-05-03 07:12:00.882] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.1627203349999604 +[2026-05-03 07:12:00.883] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 220.6452199999087 +[2026-05-03 07:12:00.883] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -150.98178000011677 +[2026-05-03 07:12:00.883] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7505820000043051 +[2026-05-03 07:12:01.391] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:01.392] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:01.431] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3396624955 trigger_emit_ticks=3397009352 +[2026-05-03 07:12:01.432] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3396624955 54936232507 trigger_emit_ticks 3397009352 54936616904 +[2026-05-03 07:12:01.434] [info] [homing.cpp:266] [1969] endstop_name probe tt 459.2004673693922 trigger_time 459.2004673693922 move_end_print_time 459.464390875 +[2026-05-03 07:12:01.434] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -411 trig_steps -406 start_pos -19934 trig_pos -20340 halt_pos -20345 +[2026-05-03 07:12:02.374] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.83171999989597 185.81350000001274 -0.05373854461939204 spos -0.05441799999569241 probing_z -0.26441799999569504 +[2026-05-03 07:12:02.374] [info] [gcode.cpp:559] [1969] probe at 34.832,185.814 is z=-0.053739 +[2026-05-03 07:12:02.375] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4932595010000114 +[2026-05-03 07:12:02.376] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 220.6452199999087 +[2026-05-03 07:12:02.376] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -150.98178000011677 +[2026-05-03 07:12:02.376] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7230820000042948 +[2026-05-03 07:12:02.866] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:02.867] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:02.881] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3573820251 trigger_emit_ticks=3574204627 +[2026-05-03 07:12:02.882] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3573820251 55113427803 trigger_emit_ticks 3574204627 55113812179 +[2026-05-03 07:12:02.884] [info] [homing.cpp:266] [1969] endstop_name probe tt 460.6771154874312 trigger_time 460.6771154874312 move_end_print_time 460.9303067916667 +[2026-05-03 07:12:02.884] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -404 trig_steps -401 start_pos -19945 trig_pos -20346 halt_pos -20349 +[2026-05-03 07:12:03.771] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.83171999989597 185.81350000001274 -0.05431746701474566 spos -0.05441799999570662 probing_z -0.27941799999570516 +[2026-05-03 07:12:03.772] [info] [gcode.cpp:559] [1969] probe at 34.832,185.814 is z=-0.054317 +[2026-05-03 07:12:03.773] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3979668339999876 +[2026-05-03 07:12:03.773] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 34.83171999989597 185.81350000001274 -0.05354654322322867 +[2026-05-03 07:12:03.774] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:12:03.774] [info] [probe.cpp:857] [1969] _move_next 42 probe_points.size 49 + +[2026-05-03 07:12:03.783] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 245.77703999986016 +[2026-05-03 07:12:03.783] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -176.10114000006826 +[2026-05-03 07:12:03.783] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000044134 +[2026-05-03 07:12:05.027] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:05.027] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:05.043] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3833211035 trigger_emit_ticks=3833595411 +[2026-05-03 07:12:05.045] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3833211035 55372818587 trigger_emit_ticks 3833595411 55373202963 +[2026-05-03 07:12:05.045] [info] [homing.cpp:266] [1969] endstop_name probe tt 462.8387367124159 trigger_time 462.8387367124159 move_end_print_time 463.0909608333333 +[2026-05-03 07:12:05.046] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1285 trig_steps -1284 start_pos -19034 trig_pos -20318 halt_pos -20319 +[2026-05-03 07:12:05.980] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.837949999895955 210.9390899999642 -0.018361643387069443 spos -0.01941799999558924 probing_z -0.20941799999558652 +[2026-05-03 07:12:05.981] [info] [gcode.cpp:559] [1969] probe at 34.838,210.939 is z=-0.018362 +[2026-05-03 07:12:05.982] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.2064046680000047 +[2026-05-03 07:12:05.983] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 245.77703999986016 +[2026-05-03 07:12:05.983] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -176.10114000006826 +[2026-05-03 07:12:05.983] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7880820000044024 +[2026-05-03 07:12:06.480] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:06.481] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:06.495] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=4007622099 trigger_emit_ticks=4008006473 +[2026-05-03 07:12:06.496] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 4007622099 55547229651 trigger_emit_ticks 4008006473 55547614025 +[2026-05-03 07:12:06.497] [info] [homing.cpp:266] [1969] endstop_name probe tt 464.2921836052098 trigger_time 464.2921836052098 move_end_print_time 464.543841125 +[2026-05-03 07:12:06.498] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -420 trig_steps -418 start_pos -19919 trig_pos -20337 halt_pos -20339 +[2026-05-03 07:12:07.432] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.837949999895955 210.9390899999642 -0.03253243790263369 spos -0.03191799999559208 probing_z -0.2569179999955975 +[2026-05-03 07:12:07.433] [info] [gcode.cpp:559] [1969] probe at 34.838,210.939 is z=-0.032532 +[2026-05-03 07:12:07.434] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4519499589999896 +[2026-05-03 07:12:07.435] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 245.77703999986016 +[2026-05-03 07:12:07.435] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -176.10114000006826 +[2026-05-03 07:12:07.435] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7380820000043922 +[2026-05-03 07:12:07.923] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:07.923] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:07.938] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=4181092145 +[2026-05-03 07:12:07.939] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 55834574848 trigger_emit_ticks 4181092145 55720699697 +[2026-05-03 07:12:07.940] [info] [homing.cpp:266] [1969] endstop_name probe tt 465.73458633600075 trigger_time 465.73458633600075 move_end_print_time 465.98731358333333 +[2026-05-03 07:12:07.940] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -399 trig_steps -397 start_pos -19939 trig_pos -20336 halt_pos -20338 +[2026-05-03 07:12:08.777] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 34.837949999895955 210.9390899999642 -0.026192574606664215 spos -0.026917999995610842 probing_z -0.2544179999956079 +[2026-05-03 07:12:08.777] [info] [gcode.cpp:559] [1969] probe at 34.838,210.939 is z=-0.026193 +[2026-05-03 07:12:08.778] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3444156670000211 +[2026-05-03 07:12:08.779] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 34.837949999895955 210.93908999996424 -0.025695551965455782 +[2026-05-03 07:12:08.779] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:12:08.780] [info] [probe.cpp:857] [1969] _move_next 43 probe_points.size 49 + +[2026-05-03 07:12:08.789] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 271.17051999988036 +[2026-05-03 07:12:08.789] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -150.72012000011728 +[2026-05-03 07:12:08.789] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000045116 +[2026-05-03 07:12:10.030] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:10.030] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:10.047] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=138630641 trigger_emit_ticks=139015017 +[2026-05-03 07:12:10.049] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 138630641 55973205489 trigger_emit_ticks 139015017 55973589865 +[2026-05-03 07:12:10.050] [info] [homing.cpp:266] [1969] endstop_name probe tt 467.842038858183 trigger_time 467.842038858183 move_end_print_time 468.09443595833335 +[2026-05-03 07:12:10.050] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1282 trig_steps -1281 start_pos -19034 trig_pos -20315 halt_pos -20316 +[2026-05-03 07:12:10.985] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.22519999988154 210.94531999999882 -0.024039916856264804 spos -0.024417999995492323 probing_z -0.20191799999548854 +[2026-05-03 07:12:10.986] [info] [gcode.cpp:559] [1969] probe at 60.225,210.945 is z=-0.024040 +[2026-05-03 07:12:10.986] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.2057515839999837 +[2026-05-03 07:12:10.988] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 271.1705199998803 +[2026-05-03 07:12:10.988] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -150.72012000011725 +[2026-05-03 07:12:10.988] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7955820000045003 +[2026-05-03 07:12:11.484] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:11.484] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:11.502] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=313074331 trigger_emit_ticks=313449331 +[2026-05-03 07:12:11.503] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 313074331 56147649179 trigger_emit_ticks 313449331 56148024179 +[2026-05-03 07:12:11.505] [info] [homing.cpp:266] [1969] endstop_name probe tt 469.2956821608899 trigger_time 469.2956821608899 move_end_print_time 469.54828983333334 +[2026-05-03 07:12:11.505] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -416 trig_steps -415 start_pos -19916 trig_pos -20331 halt_pos -20332 +[2026-05-03 07:12:12.441] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.225199999881525 210.9453199999988 -0.02633850985344796 spos -0.02691799999550426 probing_z -0.2419179999954998 +[2026-05-03 07:12:12.441] [info] [gcode.cpp:559] [1969] probe at 60.225,210.945 is z=-0.026339 +[2026-05-03 07:12:12.442] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4552422509999587 +[2026-05-03 07:12:12.443] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 271.1705199998803 +[2026-05-03 07:12:12.443] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -150.72012000011728 +[2026-05-03 07:12:12.443] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7555820000044899 +[2026-05-03 07:12:12.934] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:12.936] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:12.952] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=487020777 trigger_emit_ticks=487405151 +[2026-05-03 07:12:12.954] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 487020777 56321595625 trigger_emit_ticks 487405151 56321979999 +[2026-05-03 07:12:12.955] [info] [homing.cpp:266] [1969] endstop_name probe tt 470.7453378219883 trigger_time 470.7453378219883 move_end_print_time 470.99969683333336 +[2026-05-03 07:12:12.955] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -404 trig_steps -402 start_pos -19932 trig_pos -20334 halt_pos -20336 +[2026-05-03 07:12:13.785] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 60.22519999988151 210.9453199999988 -0.030800952496968098 spos -0.03191799999550682 probing_z -0.24941799999551018 +[2026-05-03 07:12:13.785] [info] [gcode.cpp:559] [1969] probe at 60.225,210.945 is z=-0.030801 +[2026-05-03 07:12:13.786] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3439967090000096 +[2026-05-03 07:12:13.786] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 60.22519999988153 210.9453199999988 -0.027059793068893622 +[2026-05-03 07:12:13.787] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:12:13.787] [info] [probe.cpp:857] [1969] _move_next 44 probe_points.size 49 + +[2026-05-03 07:12:13.796] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 296.5639999999471 +[2026-05-03 07:12:13.796] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -125.32664000016021 +[2026-05-03 07:12:13.796] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000046093 +[2026-05-03 07:12:15.036] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:15.037] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:15.051] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=739697729 +[2026-05-03 07:12:15.053] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 55834574848 trigger_emit_ticks 739697729 56574272577 +[2026-05-03 07:12:15.057] [info] [homing.cpp:266] [1969] endstop_name probe tt 472.8478106041097 trigger_time 472.8478106041097 move_end_print_time 473.1001264166667 +[2026-05-03 07:12:15.057] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1279 trig_steps -1278 start_pos -19034 trig_pos -20312 halt_pos -20313 +[2026-05-03 07:12:15.788] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61867999989344 210.94532000005364 -0.01669234800930705 spos -0.016917999995392563 probing_z -0.194417999995391 +[2026-05-03 07:12:15.788] [info] [gcode.cpp:559] [1969] probe at 85.619,210.945 is z=-0.016692 +[2026-05-03 07:12:15.789] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.001078500999995 +[2026-05-03 07:12:15.790] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 296.5639999999471 +[2026-05-03 07:12:15.790] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -125.32664000016021 +[2026-05-03 07:12:15.791] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8030820000045976 +[2026-05-03 07:12:16.287] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:16.287] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:16.302] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=889403398 trigger_emit_ticks=889787751 +[2026-05-03 07:12:16.305] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 889403398 56723978246 trigger_emit_ticks 889787751 56724362599 +[2026-05-03 07:12:16.307] [info] [homing.cpp:266] [1969] endstop_name probe tt 474.098580963659 trigger_time 474.098580963659 move_end_print_time 474.35038920833335 +[2026-05-03 07:12:16.307] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -417 trig_steps -416 start_pos -19913 trig_pos -20329 halt_pos -20330 +[2026-05-03 07:12:17.242] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61867999989344 210.94532000005364 -0.020451355154122414 spos -0.0194179999954045 probing_z -0.23691799999540242 +[2026-05-03 07:12:17.243] [info] [gcode.cpp:559] [1969] probe at 85.619,210.945 is z=-0.020451 +[2026-05-03 07:12:17.244] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4542202500000485 +[2026-05-03 07:12:17.245] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 296.5639999999471 +[2026-05-03 07:12:17.245] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -125.32664000016021 +[2026-05-03 07:12:17.245] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7605820000045872 +[2026-05-03 07:12:17.733] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:17.734] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:17.748] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1062968025 trigger_emit_ticks=1063352399 +[2026-05-03 07:12:17.750] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1062968025 56897542873 trigger_emit_ticks 1063352399 56897927247 +[2026-05-03 07:12:17.751] [info] [homing.cpp:266] [1969] endstop_name probe tt 475.54497612882636 trigger_time 475.54497612882636 move_end_print_time 475.7972209166667 +[2026-05-03 07:12:17.751] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -19930 trig_pos -20329 halt_pos -20330 +[2026-05-03 07:12:18.597] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 85.61867999989344 210.94532000005364 -0.02432201079448823 spos -0.024417999995407058 probing_z -0.23691799999541285 +[2026-05-03 07:12:18.597] [info] [gcode.cpp:559] [1969] probe at 85.619,210.945 is z=-0.024322 +[2026-05-03 07:12:18.598] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3546259590000318 +[2026-05-03 07:12:18.599] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 85.61867999989344 210.9453200000536 -0.020488571319305898 +[2026-05-03 07:12:18.599] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:12:18.600] [info] [probe.cpp:857] [1969] _move_next 45 probe_points.size 49 + +[2026-05-03 07:12:18.609] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 321.94502000001387 +[2026-05-03 07:12:18.609] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -99.93316000015133 +[2026-05-03 07:12:18.609] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.000582000004707 +[2026-05-03 07:12:19.844] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:19.844] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:19.859] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1316325615 trigger_emit_ticks=1316709989 +[2026-05-03 07:12:19.860] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1316325615 57150900463 trigger_emit_ticks 1316709989 57151284837 +[2026-05-03 07:12:19.862] [info] [homing.cpp:266] [1969] endstop_name probe tt 477.65632802118233 trigger_time 477.65632802118233 move_end_print_time 477.90868166666667 +[2026-05-03 07:12:19.862] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1274 trig_steps -1273 start_pos -19034 trig_pos -20307 halt_pos -20308 +[2026-05-03 07:12:20.600] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.00592999993127 210.93909000008262 -0.00843249122959519 spos -0.009417999995285697 probing_z -0.18191799999529312 +[2026-05-03 07:12:20.601] [info] [gcode.cpp:559] [1969] probe at 111.006,210.939 is z=-0.008432 +[2026-05-03 07:12:20.601] [info] [load_cell_probe.cpp:333] [1969] run_probe time 2.0010905429999752 +[2026-05-03 07:12:20.602] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 321.94502000001387 +[2026-05-03 07:12:20.603] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -99.93316000015136 +[2026-05-03 07:12:20.603] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8155820000046953 +[2026-05-03 07:12:21.101] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:21.102] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:21.116] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1467087293 trigger_emit_ticks=1467471692 +[2026-05-03 07:12:21.118] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1467087293 57301662141 trigger_emit_ticks 1467471692 57302046540 +[2026-05-03 07:12:21.119] [info] [homing.cpp:266] [1969] endstop_name probe tt 478.9127022745212 trigger_time 478.9127022745212 move_end_print_time 479.1652780416667 +[2026-05-03 07:12:21.120] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -417 trig_steps -415 start_pos -19908 trig_pos -20323 halt_pos -20325 +[2026-05-03 07:12:21.950] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.00592999993125 210.93909000008262 -0.013447228937185945 spos -0.014417999995309572 probing_z -0.22191799999530482 +[2026-05-03 07:12:21.950] [info] [gcode.cpp:559] [1969] probe at 111.006,210.939 is z=-0.013447 +[2026-05-03 07:12:21.951] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3498515429999998 +[2026-05-03 07:12:21.952] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 321.94502000001387 +[2026-05-03 07:12:21.953] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -99.93316000015137 +[2026-05-03 07:12:21.953] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7730820000046845 +[2026-05-03 07:12:22.441] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:22.442] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:22.472] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1627903123 trigger_emit_ticks=1628287497 +[2026-05-03 07:12:22.486] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1627903123 trigger_emit_ticks=1628287497 +[2026-05-03 07:12:22.488] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1627903123 57462477971 trigger_emit_ticks 1628287497 57462862345 +[2026-05-03 07:12:22.489] [info] [homing.cpp:266] [1969] endstop_name probe tt 480.25286397822794 trigger_time 480.25286397822794 move_end_print_time 480.505555875 +[2026-05-03 07:12:22.489] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -19925 trig_pos -20324 halt_pos -20325 +[2026-05-03 07:12:23.419] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 111.00592999993125 210.93909000008262 -0.012876178889372286 spos -0.01191799999531895 probing_z -0.22441799999531553 +[2026-05-03 07:12:23.419] [info] [gcode.cpp:559] [1969] probe at 111.006,210.939 is z=-0.012876 +[2026-05-03 07:12:23.420] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.4684198759999845 +[2026-05-03 07:12:23.420] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 111.00592999993125 210.93909000008262 -0.011585299685384473 +[2026-05-03 07:12:23.421] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:12:23.421] [info] [probe.cpp:857] [1969] _move_next 46 probe_points.size 49 + +[2026-05-03 07:12:23.431] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 347.33850000008067 +[2026-05-03 07:12:23.431] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -74.5521400001425 +[2026-05-03 07:12:23.431] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000048042 +[2026-05-03 07:12:23.465] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:481.27800000037996,last_temp:59.97603323402399,temp:59.97603323402399,target_temp:60,smoothed_temp:59.98054800598733 +[2026-05-03 07:12:24.668] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:24.668] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:24.684] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=1895047453 trigger_emit_ticks=1895431827 +[2026-05-03 07:12:24.686] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 1895047453 57729622301 trigger_emit_ticks 1895431827 57730006675 +[2026-05-03 07:12:24.687] [info] [homing.cpp:266] [1969] endstop_name probe tt 482.4791075168678 trigger_time 482.4791075168678 move_end_print_time 482.73215266666665 +[2026-05-03 07:12:24.687] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1279 trig_steps -1276 start_pos -19034 trig_pos -20310 halt_pos -20313 +[2026-05-03 07:12:25.419] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39317999996908 210.9453200001116 -0.025516669328251113 spos -0.024417999995193895 probing_z -0.1894179999951957 +[2026-05-03 07:12:25.419] [info] [gcode.cpp:559] [1969] probe at 136.393,210.945 is z=-0.025517 +[2026-05-03 07:12:25.420] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.9982561669999654 +[2026-05-03 07:12:25.421] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 347.33850000008067 +[2026-05-03 07:12:25.421] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -74.55214000014251 +[2026-05-03 07:12:25.422] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8030820000047926 +[2026-05-03 07:12:25.917] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:25.933] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=2045044721 trigger_emit_ticks=2045429097 +[2026-05-03 07:12:25.950] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 2045044721 57879619569 trigger_emit_ticks 2045429097 57880003945 +[2026-05-03 07:12:25.951] [info] [homing.cpp:266] [1969] endstop_name probe tt 483.72910483155255 trigger_time 483.72910483155255 move_end_print_time 483.981049375 +[2026-05-03 07:12:25.951] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -416 trig_steps -415 start_pos -19913 trig_pos -20328 halt_pos -20329 +[2026-05-03 07:12:26.879] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39317999996908 210.9453200001116 -0.027503898440743274 spos -0.026917999995212938 probing_z -0.23441799999520752 +[2026-05-03 07:12:26.879] [info] [gcode.cpp:559] [1969] probe at 136.393,210.945 is z=-0.027504 +[2026-05-03 07:12:26.880] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.459401334000006 +[2026-05-03 07:12:26.881] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 347.33850000008067 +[2026-05-03 07:12:26.881] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -74.55214000014251 +[2026-05-03 07:12:26.881] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.763082000004782 +[2026-05-03 07:12:27.369] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:27.370] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:27.383] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=2219644669 +[2026-05-03 07:12:27.384] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 60129542144 trigger_emit_ticks 2219644669 58054219517 +[2026-05-03 07:12:27.385] [info] [homing.cpp:266] [1969] endstop_name probe tt 485.1809236342122 trigger_time 485.1809236342122 move_end_print_time 485.43277308333336 +[2026-05-03 07:12:27.385] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -19929 trig_pos -20328 halt_pos -20329 +[2026-05-03 07:12:28.227] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 136.39317999996908 210.9453200001116 -0.028986942951375133 spos -0.029417999995224875 probing_z -0.23441799999521806 +[2026-05-03 07:12:28.227] [info] [gcode.cpp:559] [1969] probe at 136.393,210.945 is z=-0.028987 +[2026-05-03 07:12:28.228] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.348381083999982 +[2026-05-03 07:12:28.229] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 136.39317999996908 210.9453200001116 -0.02733583690678984 +[2026-05-03 07:12:28.229] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:12:28.230] [info] [probe.cpp:857] [1969] _move_next 47 probe_points.size 49 + +[2026-05-03 07:12:28.232] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:12:28.232] [info] [gcode_move.cpp:52] [1969] G180 select 915 +[2026-05-03 07:12:28.233] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.243] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.245] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.248] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.250] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.252] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.254] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.256] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.258] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.260] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.262] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.264] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.266] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.268] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.269] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.271] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.273] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.275] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.276] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.278] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.280] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.281] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.336] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.398] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.461] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.523] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.585] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.613] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:486.4247533286619,last_temp:139.9852179362406,temp:139.9852179362406,target_temp:140,smoothed_temp:139.88490468163252 +[2026-05-03 07:12:28.647] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.709] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.773] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.835] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.897] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:28.960] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:29.022] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:29.084] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:29.146] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:29.208] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:29.272] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:29.334] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:29.395] [info] [force_move.cpp:208] [1969] FORCE_MOVE stepper_z distance=-0.15 velocity=3000 accel=1200 +[2026-05-03 07:12:29.458] [info] [gcode_move.cpp:772] [1969] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 07:12:29.460] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 372.7319800001475 +[2026-05-03 07:12:29.460] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -49.15866000013364 +[2026-05-03 07:12:29.460] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 5.000582000004859 +[2026-05-03 07:12:32.546] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:32.547] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:32.570] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=0 trigger_emit_ticks=2840902805 +[2026-05-03 07:12:32.571] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 0 60129542144 trigger_emit_ticks 2840902805 58675477653 +[2026-05-03 07:12:32.572] [info] [homing.cpp:266] [1969] endstop_name probe tt 490.35814902458736 trigger_time 490.35814902458736 move_end_print_time 490.609915625 +[2026-05-03 07:12:32.573] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -2073 trig_steps -2071 start_pos -18234 trig_pos -20305 halt_pos -20307 +[2026-05-03 07:12:33.562] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.78666000000692 210.94532000014055 -0.004907732227436207 spos -0.004417999995148136 probing_z -0.17691799999514135 +[2026-05-03 07:12:33.562] [info] [gcode.cpp:559] [1969] probe at 161.787,210.945 is z=-0.004908 +[2026-05-03 07:12:33.563] [info] [load_cell_probe.cpp:333] [1969] run_probe time 4.104811794000057 +[2026-05-03 07:12:33.564] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 372.7319800001475 +[2026-05-03 07:12:33.564] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -49.15866000013364 +[2026-05-03 07:12:33.564] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.818082000004847 +[2026-05-03 07:12:34.060] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:34.060] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:34.075] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3022025605 trigger_emit_ticks=3022409985 +[2026-05-03 07:12:34.079] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3022025605 58856600453 trigger_emit_ticks 3022409985 58856984833 +[2026-05-03 07:12:34.080] [info] [homing.cpp:266] [1969] endstop_name probe tt 491.87072658879265 trigger_time 491.87072658879265 move_end_print_time 492.123255 +[2026-05-03 07:12:34.080] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -409 trig_steps -406 start_pos -19907 trig_pos -20313 halt_pos -20316 +[2026-05-03 07:12:34.907] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.78666000000692 210.94532000014055 -0.008205479011724054 spos -0.009417999995150694 probing_z -0.19691799999515314 +[2026-05-03 07:12:34.908] [info] [gcode.cpp:559] [1969] probe at 161.787,210.945 is z=-0.008205 +[2026-05-03 07:12:34.909] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3452753760000178 +[2026-05-03 07:12:34.910] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 372.7319800001475 +[2026-05-03 07:12:34.910] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -49.15866000013364 +[2026-05-03 07:12:34.910] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7955820000048358 +[2026-05-03 07:12:35.400] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:35.414] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3182844609 trigger_emit_ticks=3183219609 +[2026-05-03 07:12:35.416] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3182844609 59017419457 trigger_emit_ticks 3183219609 59017794457 +[2026-05-03 07:12:35.417] [info] [homing.cpp:266] [1969] endstop_name probe tt 493.21082414858466 trigger_time 493.21082414858466 move_end_print_time 493.463846625 +[2026-05-03 07:12:35.417] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -404 trig_steps -401 start_pos -19916 trig_pos -20317 halt_pos -20320 +[2026-05-03 07:12:36.246] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 161.78666000000692 210.94532000014055 -0.007811516146214087 spos -0.0069179999951600735 probing_z -0.20691799999516414 +[2026-05-03 07:12:36.247] [info] [gcode.cpp:559] [1969] probe at 161.787,210.945 is z=-0.007812 +[2026-05-03 07:12:36.248] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3391226680000727 +[2026-05-03 07:12:36.248] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 161.78666000000692 210.94532000014055 -0.006974909128458116 +[2026-05-03 07:12:36.249] [info] [device_status.cpp:349] [1969] Bed Mesh State: running +[2026-05-03 07:12:36.249] [info] [probe.cpp:857] [1969] _move_next 48 probe_points.size 49 + +[2026-05-03 07:12:36.258] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 398.1254600002143 +[2026-05-03 07:12:36.259] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -23.765180000129455 +[2026-05-03 07:12:36.259] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 3.0005820000049552 +[2026-05-03 07:12:37.493] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:37.495] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:37.508] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3434085837 trigger_emit_ticks=3434470213 +[2026-05-03 07:12:37.510] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3434085837 59268660685 trigger_emit_ticks 3434470213 59269045061 +[2026-05-03 07:12:37.511] [info] [homing.cpp:266] [1969] endstop_name probe tt 495.30460746923205 trigger_time 495.30460746923205 move_end_print_time 495.55706733333335 +[2026-05-03 07:12:37.511] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -1274 trig_steps -1273 start_pos -19034 trig_pos -20307 halt_pos -20308 +[2026-05-03 07:12:38.241] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.1801400000424 210.94532000017188 -0.013376716222841062 spos -0.014417999995039565 probing_z -0.18191799999504488 +[2026-05-03 07:12:38.242] [info] [gcode.cpp:559] [1969] probe at 187.180,210.945 is z=-0.013377 +[2026-05-03 07:12:38.243] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.993227710000042 +[2026-05-03 07:12:38.244] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 398.1254600002143 +[2026-05-03 07:12:38.244] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -23.765180000129476 +[2026-05-03 07:12:38.244] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.8155820000049435 +[2026-05-03 07:12:38.741] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:38.742] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:38.757] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3583804145 trigger_emit_ticks=3584179145 +[2026-05-03 07:12:38.759] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3583804145 59418378993 trigger_emit_ticks 3584179145 59418753993 +[2026-05-03 07:12:38.760] [info] [homing.cpp:266] [1969] endstop_name probe tt 496.5521989438601 trigger_time 496.5521989438601 move_end_print_time 496.8044865416667 +[2026-05-03 07:12:38.760] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -416 trig_steps -414 start_pos -19908 trig_pos -20322 halt_pos -20324 +[2026-05-03 07:12:39.588] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.1801400000424 210.94532000017188 -0.021903969858807576 spos -0.02191799999505406 probing_z -0.2194179999950564 +[2026-05-03 07:12:39.588] [info] [gcode.cpp:559] [1969] probe at 187.180,210.945 is z=-0.021904 +[2026-05-03 07:12:39.589] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3459321670000008 +[2026-05-03 07:12:39.590] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 398.1254600002143 +[2026-05-03 07:12:39.590] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -23.765180000129476 +[2026-05-03 07:12:39.590] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 0.7755820000049327 +[2026-05-03 07:12:40.076] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:2 is_failure:false +[2026-05-03 07:12:40.076] [info] [mcu.cpp:390] [2024] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:40.090] [info] [serialhdl.cpp:502] [2024] mcu 'bed_sensor': got handle_output name: #output message: trigger_ticks=3744040749 trigger_emit_ticks=3744415749 +[2026-05-03 07:12:40.092] [info] [load_cell_probe.cpp:1049] [1969] trigger_ticks 3744040749 59578615597 trigger_emit_ticks 3744415749 59578990597 +[2026-05-03 07:12:40.093] [info] [homing.cpp:266] [1969] endstop_name probe tt 497.88752204719714 trigger_time 497.88752204719714 move_end_print_time 498.139685625 +[2026-05-03 07:12:40.093] [info] [homing.cpp:281] [1969] stepper_name stepper_z halt_steps -400 trig_steps -399 start_pos -19924 trig_pos -20323 halt_pos -20324 +[2026-05-03 07:12:40.934] [info] [load_cell_probe.cpp:617] [1969] ppa: valid true epos 187.1801400000424 210.94532000017188 -0.022584274151802947 spos -0.02191799999506827 probing_z -0.22191799999506734 +[2026-05-03 07:12:40.935] [info] [gcode.cpp:559] [1969] probe at 187.180,210.945 is z=-0.022584 +[2026-05-03 07:12:40.936] [info] [load_cell_probe.cpp:333] [1969] run_probe time 1.3463878759999943 +[2026-05-03 07:12:40.936] [info] [load_cell_probe.cpp:338] [1969] run_probe epos 187.18014000004237 210.94532000017185 -0.019288320077817195 +[2026-05-03 07:12:40.945] [info] [bed_mesh.cpp:463] [1969] update_status bed_mesh_exist:0x0100 +[2026-05-03 07:12:40.945] [info] [print_stats.cpp:277] [1969] bed_mesh_exist:0x0100 +[2026-05-03 07:12:40.945] [info] [gcode.cpp:559] [1969] Mesh Bed Leveling Complete +[2026-05-03 07:12:40.978] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] version 1 +[2026-05-03 07:12:40.978] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] points 0.065046, 0.041437, 0.020919, 0.005440, -0.011262, -0.021396, 0.005544, 0.008717, 0.003851, -0.035009, -0.051846, -0.057245, -0.075917, -0.073291, -0.037091, -0.045483, -0.064948, -0.087470, -0.101677, -0.121856, -0.121835, -0.063953, -0.054584, -0.075358, -0.093918, -0.109800, -0.121396, -0.121693, -0.077159, -0.055388, -0.076762, -0.069868, -0.084117, -0.109757, -0.110303, -0.053547, -0.076457, -0.070504, -0.063692, -0.062756, -0.057177, -0.064478, -0.025696, -0.027060, -0.020489, -0.011585, -0.027336, -0.006975, -0.019288 +[2026-05-03 07:12:40.979] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] offset 0.000000 +[2026-05-03 07:12:40.979] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] algo bicubic +[2026-05-03 07:12:40.979] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] max_x 187.177100 +[2026-05-03 07:12:40.979] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] max_y 210.943100 +[2026-05-03 07:12:40.979] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] mesh_x_pps 3 +[2026-05-03 07:12:40.979] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] mesh_y_pps 3 +[2026-05-03 07:12:40.979] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] min_x 34.837100 +[2026-05-03 07:12:40.979] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] min_y 60.163100 +[2026-05-03 07:12:40.979] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] tension 0.200000 +[2026-05-03 07:12:40.979] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] x_count 7 +[2026-05-03 07:12:40.979] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] y_count 7 +[2026-05-03 07:12:40.986] [info] [bed_mesh.cpp:463] [1969] update_status bed_mesh_exist:0x0100 +[2026-05-03 07:12:40.986] [info] [print_stats.cpp:277] [1969] bed_mesh_exist:0x0100 +[2026-05-03 07:12:40.987] [info] [bed_mesh.cpp:2832] [1969] ProfileManager::save_profile time 0.04104720800000905 +[2026-05-03 07:12:41.525] [info] [configfile.cpp:723] [1969] CFG /opt/usr/cfg/autosave.cfg BACKUP /opt/usr/cfg/autosave_backup.cfg TEMP /opt/usr/cfg/autosave_temp.cfg +[2026-05-03 07:12:41.528] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] version 1 +[2026-05-03 07:12:41.528] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] points 0.065046, 0.041437, 0.020919, 0.005440, -0.011262, -0.021396, 0.005544, 0.008717, 0.003851, -0.035009, -0.051846, -0.057245, -0.075917, -0.073291, -0.037091, -0.045483, -0.064948, -0.087470, -0.101677, -0.121856, -0.121835, -0.063953, -0.054584, -0.075358, -0.093918, -0.109800, -0.121396, -0.121693, -0.077159, -0.055388, -0.076762, -0.069868, -0.084117, -0.109757, -0.110303, -0.053547, -0.076457, -0.070504, -0.063692, -0.062756, -0.057177, -0.064478, -0.025696, -0.027060, -0.020489, -0.011585, -0.027336, -0.006975, -0.019288 +[2026-05-03 07:12:41.528] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] offset 0.000000 +[2026-05-03 07:12:41.528] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] algo bicubic +[2026-05-03 07:12:41.528] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] max_x 187.177100 +[2026-05-03 07:12:41.528] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] max_y 210.943100 +[2026-05-03 07:12:41.528] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] mesh_x_pps 3 +[2026-05-03 07:12:41.529] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] mesh_y_pps 3 +[2026-05-03 07:12:41.529] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] min_x 34.837100 +[2026-05-03 07:12:41.529] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] min_y 60.163100 +[2026-05-03 07:12:41.529] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] tension 0.200000 +[2026-05-03 07:12:41.529] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] x_count 7 +[2026-05-03 07:12:41.529] [info] [configfile.cpp:659] [1969] save_config: set [bed_mesh ADAPTIVE] y_count 7 +[2026-05-03 07:12:41.535] [info] [bed_mesh.cpp:463] [1969] update_status bed_mesh_exist:0x0100 +[2026-05-03 07:12:41.535] [info] [print_stats.cpp:277] [1969] bed_mesh_exist:0x0100 +[2026-05-03 07:12:41.536] [info] [bed_mesh.cpp:2832] [1969] ProfileManager::save_profile time 0.00904891699997279 +[2026-05-03 07:12:41.553] [info] [configfile.cpp:723] [1969] CFG /opt/usr/cfg/autosave.cfg BACKUP /opt/usr/cfg/autosave_backup.cfg TEMP /opt/usr/cfg/autosave_temp.cfg +[2026-05-03 07:12:41.556] [info] [gcode_move.cpp:52] [1969] G180 select 4 +[2026-05-03 07:12:41.557] [info] [device_status.cpp:349] [1969] Bed Mesh State: completed +[2026-05-03 07:12:41.558] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 704 error_level 3 +[2026-05-03 07:12:41.560] [info] [device_status.cpp:832] [1969] M2202 result_code:2902 +[2026-05-03 07:12:41.564] [info] [filament_motion_sensor.cpp:154] [1969] CMD_encoder_sensor_switch:true +[2026-05-03 07:12:41.564] [info] [webhooks.cpp:170] [1969] return total: {"id":38,"result":{}} +[2026-05-03 07:12:41.664] [info] [homing_override.cpp:238] [1969] need false false false homed true true true +[2026-05-03 07:12:41.665] [info] [device_status.cpp:832] [1969] M2202 result_code:2801 +[2026-05-03 07:12:41.666] [info] [homing_override.cpp:166] [1969] homing_ready axis z +[2026-05-03 07:12:41.919] [info] [homing_override.cpp:175] [1969] homing_ready #2: endstop name z state true +[2026-05-03 07:12:44.547] [info] [gcode.cpp:559] [1969] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 07:12:44.821] [info] [gcode.cpp:559] [1969] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 07:12:44.823] [info] [gcode_move.cpp:629] [1969] cmd_M114 X:187.180 Y:210.945 Z:23.079 E:0.000 +[2026-05-03 07:12:44.824] [info] [stepper.cpp:573] [1969] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 07:12:44.854] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 596.6953200001719 +[2026-05-03 07:12:44.854] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 174.80467999982812 +[2026-05-03 07:12:44.854] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 23 +[2026-05-03 07:12:48.297] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:48.315] [warning] [tmc.cpp:887] [1969] Stepper stepper_y phase change (was -61 now 3) +[2026-05-03 07:12:48.317] [info] [mcu.cpp:634] [1969] home_wait pin_value:1 next_clock:12146629649 +[2026-05-03 07:12:48.317] [info] [homing.cpp:266] [1969] endstop_name x tt 506.10936104166666 trigger_time 506.10936104166666 move_end_print_time 506.36085333333335 +[2026-05-03 07:12:48.318] [info] [homing.cpp:266] [1969] endstop_name x tt 506.10936104166666 trigger_time 506.10936104166666 move_end_print_time 506.36085333333335 +[2026-05-03 07:12:48.318] [info] [homing.cpp:309] [1969] stepper_name stepper_x over_steps 0 halt_pos -8572 start_pos 6620 trig_pos -8572 +[2026-05-03 07:12:48.318] [info] [homing.cpp:309] [1969] stepper_name stepper_y over_steps 0 halt_pos -215 start_pos 14977 trig_pos -215 +[2026-05-03 07:12:48.349] [info] [gcode.cpp:544] [1969] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 07:12:48.350] [info] [stepper.cpp:573] [1969] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 07:12:48.956] [info] [gcode_move.cpp:629] [1969] cmd_M114 X:8.000 Y:210.945 Z:23.086 E:0.000 +[2026-05-03 07:12:48.957] [info] [gcode_move.cpp:629] [1969] cmd_M114 X:8.000 Y:210.945 Z:23.086 E:0.000 +[2026-05-03 07:12:48.958] [info] [stepper.cpp:573] [1969] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 07:12:48.990] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 414 +[2026-05-03 07:12:48.990] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -398 +[2026-05-03 07:12:48.990] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 23 +[2026-05-03 07:12:52.829] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:52.839] [warning] [tmc.cpp:887] [1969] Stepper stepper_y phase change (was 3 now -61) +[2026-05-03 07:12:52.849] [info] [mcu.cpp:634] [1969] home_wait pin_value:1 next_clock:12255382178 +[2026-05-03 07:12:52.850] [info] [homing.cpp:266] [1969] endstop_name y tt 510.6407164166667 trigger_time 510.6407164166667 move_end_print_time 510.89270445833336 +[2026-05-03 07:12:52.850] [info] [homing.cpp:266] [1969] endstop_name y tt 510.6407164166667 trigger_time 510.6407164166667 move_end_print_time 510.89270445833336 +[2026-05-03 07:12:52.850] [info] [homing.cpp:309] [1969] stepper_name stepper_y over_steps 0 halt_pos 17686 start_pos 588 trig_pos 17686 +[2026-05-03 07:12:52.850] [info] [homing.cpp:309] [1969] stepper_name stepper_x over_steps 0 halt_pos -24867 start_pos -7769 trig_pos -24867 +[2026-05-03 07:12:52.881] [info] [gcode.cpp:544] [1969] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 07:12:52.882] [info] [stepper.cpp:573] [1969] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 07:12:53.490] [info] [gcode_move.cpp:629] [1969] cmd_M114 X:8.000 Y:8.000 Z:22.995 E:0.000 +[2026-05-03 07:12:53.491] [info] [gcode_move.cpp:629] [1969] cmd_M114 X:8.000 Y:8.000 Z:22.995 E:0.000 +[2026-05-03 07:12:53.492] [info] [stepper.cpp:573] [1969] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 07:12:53.541] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 393.75 +[2026-05-03 07:12:53.541] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position 377.75 +[2026-05-03 07:12:53.541] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 23 +[2026-05-03 07:12:53.994] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:54.025] [info] [mcu.cpp:634] [1969] home_wait pin_value:1 next_clock:12283341194 +[2026-05-03 07:12:54.026] [info] [homing.cpp:266] [1969] endstop_name x tt 511.80567541666665 trigger_time 511.80567541666665 move_end_print_time 512.0655664166667 +[2026-05-03 07:12:54.026] [info] [homing.cpp:266] [1969] endstop_name x tt 511.80567541666665 trigger_time 511.80567541666665 move_end_print_time 512.0655664166667 +[2026-05-03 07:12:54.026] [info] [homing.cpp:309] [1969] stepper_name stepper_x over_steps 0 halt_pos -24859 start_pos -24064 trig_pos -24859 +[2026-05-03 07:12:54.026] [info] [homing.cpp:309] [1969] stepper_name stepper_y over_steps 0 halt_pos 16088 start_pos 16883 trig_pos 16088 +[2026-05-03 07:12:54.057] [info] [gcode.cpp:544] [1969] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 07:12:54.058] [info] [stepper.cpp:573] [1969] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 07:12:54.667] [info] [gcode_move.cpp:629] [1969] cmd_M114 X:8.000 Y:8.000 Z:22.995 E:0.000 +[2026-05-03 07:12:54.668] [info] [gcode_move.cpp:629] [1969] cmd_M114 X:8.000 Y:8.000 Z:22.995 E:0.000 +[2026-05-03 07:12:54.669] [info] [stepper.cpp:573] [1969] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 07:12:54.699] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 414 +[2026-05-03 07:12:54.700] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -398 +[2026-05-03 07:12:54.700] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 23 +[2026-05-03 07:12:55.155] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:55.175] [info] [mcu.cpp:634] [1969] home_wait pin_value:1 next_clock:12311199321 +[2026-05-03 07:12:55.176] [info] [homing.cpp:266] [1969] endstop_name y tt 512.9664307083333 trigger_time 512.9664307083333 move_end_print_time 513.2261483333328 +[2026-05-03 07:12:55.176] [info] [homing.cpp:266] [1969] endstop_name y tt 512.9664307083333 trigger_time 512.9664307083333 move_end_print_time 513.2261483333328 +[2026-05-03 07:12:55.176] [info] [homing.cpp:309] [1969] stepper_name stepper_y over_steps 0 halt_pos 17687 start_pos 16891 trig_pos 17687 +[2026-05-03 07:12:55.176] [info] [homing.cpp:309] [1969] stepper_name stepper_x over_steps 0 halt_pos -24852 start_pos -24056 trig_pos -24852 +[2026-05-03 07:12:55.206] [info] [gcode.cpp:544] [1969] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 07:12:55.207] [info] [stepper.cpp:573] [1969] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 07:12:55.208] [info] [gcode_move.cpp:629] [1969] cmd_M114 X:8.000 Y:8.000 Z:22.995 E:0.000 +[2026-05-03 07:12:55.801] [info] [gcode.cpp:559] [1969] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 07:12:56.075] [info] [gcode.cpp:559] [1969] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 07:12:56.076] [info] [homing_override.cpp:395] [1969] manual_move z start +[2026-05-03 07:12:56.077] [info] [homing_override.cpp:397] [1969] manual_move z over +[2026-05-03 07:12:56.077] [info] [homing_override.cpp:418] [1969] prev_G28 z start +[2026-05-03 07:12:56.111] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 316.5 +[2026-05-03 07:12:56.111] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -211.5 +[2026-05-03 07:12:56.111] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 383.714709 +[2026-05-03 07:12:59.299] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:12:59.314] [info] [mcu.cpp:634] [1969] home_wait pin_value:1 next_clock:12410660809 +[2026-05-03 07:12:59.315] [info] [homing.cpp:266] [1969] endstop_name z tt 517.1106170416666 trigger_time 517.1106170416666 move_end_print_time 517.3627958333333 +[2026-05-03 07:12:59.315] [info] [homing.cpp:309] [1969] stepper_name stepper_z over_steps 0 halt_pos -17610 start_pos -11034 trig_pos -17610 +[2026-05-03 07:12:59.318] [info] [homing.cpp:152] [1969] kin_spos name stepper_x command_position 316.5 +[2026-05-03 07:12:59.318] [info] [homing.cpp:152] [1969] kin_spos name stepper_y command_position -211.5 +[2026-05-03 07:12:59.318] [info] [homing.cpp:152] [1969] kin_spos name stepper_z command_position 10.570582 +[2026-05-03 07:13:00.445] [info] [mcu.cpp:390] [2018] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 07:13:00.458] [info] [mcu.cpp:634] [1969] home_wait pin_value:1 next_clock:12438176911 +[2026-05-03 07:13:00.458] [info] [homing.cpp:266] [1969] endstop_name z tt 518.2568712916667 trigger_time 518.2568712916667 move_end_print_time 518.5092036666666 +[2026-05-03 07:13:00.459] [info] [homing.cpp:309] [1969] stepper_name stepper_z over_steps 0 halt_pos -17609 start_pos -16810 trig_pos -17609 +[2026-05-03 07:13:00.460] [info] [z_compensation.cpp:264] [1969] ZCompensation handle_home_rails_end +[2026-05-03 07:13:00.460] [info] [z_compensation.cpp:92] [1969] use_fix_ref_temperature true fix_ref_temperature 140 ref_temperature 139.71269273389578 +[2026-05-03 07:13:00.460] [info] [gcode.cpp:544] [1969] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 07:13:00.461] [info] [homing_override.cpp:420] [1969] prev_G28 z over +[2026-05-03 07:13:00.461] [info] [homing_override.cpp:422] [1969] manual_move z start +[2026-05-03 07:13:00.461] [info] [homing_override.cpp:434] [1969] manual_move z over +[2026-05-03 07:13:00.462] [info] [device_status.cpp:832] [1969] M2202 result_code:2802 +[2026-05-03 07:13:00.464] [info] [device_status.cpp:832] [1969] M2202 result_code:1045 +[2026-05-03 07:13:00.464] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:13:00.464] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:13:00.465] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:13:00.465] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:13:00.465] [info] [extruder.cpp:501] [1969] cmd_M104 temp 210 index -1 wait true +[2026-05-03 07:13:00.465] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:210,wait:true +[2026-05-03 07:13:01.116] [info] [verify_heater.cpp:164] [1969] Heater extruder approaching new target of 210 +[2026-05-03 07:13:07.467] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:13:18.500] [info] [clocksync.cpp:212] [2024] mcu 'bed_sensor': Ignoring clock sample: sent_time=561.7406858090001,time_avg=532.1869708475897,freq=119998195.75883067,diff=78522.40785980225(0.0006543533988316853),stddev=7310.146242501481 +[2026-05-03 07:13:19.129] [info] [verify_heater.cpp:140] [1969] Heater extruder within range of 210 +[2026-05-03 07:13:26.481] [info] [device_status.cpp:832] [1969] M2202 result_code:1066 +[2026-05-03 07:13:26.483] [info] [heaters.cpp:1198] [1969] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 210 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 07:13:26.484] [info] [gcode.cpp:559] [1969] Unknown command: T0 +[2026-05-03 07:13:26.485] [info] [mmu.cpp:4520] [1969] M6211 start +[2026-05-03 07:13:26.486] [info] [mmu.cpp:4540] [1969] M6211 printable_height 256 T 0 A true K 75 L 200 M 600 N 300 I 0 J 179 P 5000 Q 210 S 210 R 210 C 2 D 2 +[2026-05-03 07:13:26.486] [info] [mmu.cpp:3705] [1969] get_T_channel channel 0 +[2026-05-03 07:13:26.489] [info] [mmu.cpp:4556] [1969] M6211 z_move 5.0269050370328605 accel 5000 +[2026-05-03 07:13:26.490] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.05160920702097925 +[2026-05-03 07:13:26.492] [info] [gcode_move.cpp:52] [1969] G180 select 10 +[2026-05-03 07:13:26.494] [info] [device_status.cpp:832] [1969] M2202 result_code:1045 +[2026-05-03 07:13:26.495] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:13:26.495] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:13:26.495] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:13:26.496] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:13:26.496] [info] [extruder.cpp:501] [1969] cmd_M104 temp 210 index -1 wait true +[2026-05-03 07:13:26.496] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:210,wait:true +[2026-05-03 07:13:26.497] [info] [device_status.cpp:832] [1969] M2202 result_code:1066 +[2026-05-03 07:13:26.498] [info] [heaters.cpp:1198] [1969] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 210 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 07:13:26.499] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:13:26.499] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:13:26.499] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:13:26.500] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:13:26.500] [info] [extruder.cpp:501] [1969] cmd_M104 temp 210 index -1 wait false +[2026-05-03 07:13:26.500] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:210,wait:false +[2026-05-03 07:13:26.501] [info] [mmu.cpp:3985] [1969] Execute filament switch process, retry:0 +[2026-05-03 07:13:26.501] [info] [mmu.cpp:3988] [1969] T: 0 +[2026-05-03 07:13:26.501] [info] [mmu.cpp:3705] [1969] get_T_channel channel 0 +[2026-05-03 07:13:26.501] [info] [mmu.cpp:3998] [1969] CMD_canvas_switch_filament channel 0 fila_in[channel] 1 ex_fila_status 1 +[2026-05-03 07:13:26.501] [info] [mmu.cpp:2493] [1969] start extrude channel check. +[2026-05-03 07:13:26.502] [info] [gcode_move.cpp:52] [1969] G180 select 812 +[2026-05-03 07:13:26.507] [info] [mcu.cpp:712] [1969] set_digital pin PB7 544.5780661546656 569.748956729 +[2026-05-03 07:13:26.722] [error] [tmc.cpp:359] [1969] TMC extruder reports GSTAT: 10000000 reset=1(Reset) +[2026-05-03 07:13:40.252] [info] [gcode_move.cpp:52] [1969] G180 select 818 +[2026-05-03 07:13:40.261] [info] [mmu.cpp:2529] [1969] step 1 : distance 70.87433026498573 +[2026-05-03 07:13:40.261] [info] [mmu.cpp:2529] [1969] step 1 : distance 0 +[2026-05-03 07:13:40.261] [info] [mmu.cpp:2529] [1969] step 1 : distance 0 +[2026-05-03 07:13:40.261] [info] [mmu.cpp:2529] [1969] step 1 : distance 0 +[2026-05-03 07:13:40.261] [info] [mmu.cpp:2600] [1969] extrude channel check result: 0 +[2026-05-03 07:13:40.262] [info] [mmu.cpp:4315] [1969] Extruder filament sensor triggered +[2026-05-03 07:13:40.262] [info] [mmu.cpp:4752] [1969] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 07:13:40.262] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1210 error_level 3 +[2026-05-03 07:13:40.263] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1211 error_level 3 +[2026-05-03 07:13:40.263] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1220 error_level 3 +[2026-05-03 07:13:40.264] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1231 error_level 3 +[2026-05-03 07:13:40.264] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1232 error_level 3 +[2026-05-03 07:13:40.264] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1241 error_level 3 +[2026-05-03 07:13:40.265] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1242 error_level 3 +[2026-05-03 07:13:40.265] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1243 error_level 3 +[2026-05-03 07:13:40.265] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1251 error_level 3 +[2026-05-03 07:13:40.266] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1252 error_level 3 +[2026-05-03 07:13:40.266] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1265 error_level 3 +[2026-05-03 07:13:40.267] [info] [mmu.cpp:4747] [1969] clear_abnormal_feedback #1 __OVER +[2026-05-03 07:13:40.267] [info] [mmu.cpp:4017] [1969] Execute filament switch process complete, channel 0 +[2026-05-03 07:13:44.319] [info] [device_status.cpp:832] [1969] M2202 result_code:1045 +[2026-05-03 07:13:44.320] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:13:44.320] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:13:44.320] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:13:44.321] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:13:44.321] [info] [extruder.cpp:501] [1969] cmd_M104 temp 210 index -1 wait true +[2026-05-03 07:13:44.321] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:210,wait:true +[2026-05-03 07:13:46.324] [info] [device_status.cpp:832] [1969] M2202 result_code:1066 +[2026-05-03 07:13:46.325] [info] [heaters.cpp:1198] [1969] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 210 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 07:13:46.326] [info] [mmu.cpp:4604] [1969] M6211 flush_times 3 flush_length_actual 61.666666666666664 +[2026-05-03 07:13:46.327] [info] [gcode_move.cpp:52] [1969] G180 select 819 +[2026-05-03 07:14:08.465] [info] [gcode_move.cpp:52] [1969] G180 select 818 +[2026-05-03 07:14:08.471] [info] [gcode_move.cpp:52] [1969] G180 select 819 +[2026-05-03 07:14:21.506] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:14:23.966] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:601.77800000038,last_temp:59.99339064703099,temp:59.99339064703099,target_temp:60,smoothed_temp:59.96461399926566 +[2026-05-03 07:14:28.614] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:606.4264204495412,last_temp:211.03648665040384,temp:211.03648665040384,target_temp:210,smoothed_temp:210.29732793575036 +[2026-05-03 07:14:31.043] [info] [gcode_move.cpp:52] [1969] G180 select 818 +[2026-05-03 07:14:31.049] [info] [device_status.cpp:832] [1969] M2202 result_code:1045 +[2026-05-03 07:14:31.051] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:14:31.051] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:14:31.051] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:14:31.052] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:14:31.052] [info] [extruder.cpp:501] [1969] cmd_M104 temp 210 index -1 wait true +[2026-05-03 07:14:31.052] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:210,wait:true +[2026-05-03 07:14:31.053] [info] [device_status.cpp:832] [1969] M2202 result_code:1066 +[2026-05-03 07:14:31.054] [info] [heaters.cpp:1198] [1969] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 210 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 07:14:33.689] [info] [gcode_move.cpp:52] [1969] G180 select 819 +[2026-05-03 07:14:57.241] [info] [gcode_move.cpp:52] [1969] G180 select 818 +[2026-05-03 07:14:57.248] [info] [mmu.cpp:4633] [1969] M6211 over. complete +[2026-05-03 07:14:59.681] [info] [gcode_move.cpp:52] [1969] G180 select 7 +[2026-05-03 07:14:59.682] [info] [gcode.cpp:914] [1969] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=0, BED_MESH_PROFILE=0 +[2026-05-03 07:14:59.682] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:14:59.683] [info] [bed_mesh.cpp:2901] [1969] cmd_BED_MESH_PROFILE: from_slicer 0 execute_calirate_from_slicer 1 +[2026-05-03 07:14:59.700] [info] [bed_mesh.cpp:463] [1969] update_status bed_mesh_exist:0x0100 +[2026-05-03 07:14:59.701] [info] [print_stats.cpp:277] [1969] bed_mesh_exist:0x0100 +[2026-05-03 07:14:59.701] [info] [bed_mesh.cpp:2875] [1969] ProfileManager::load_profile default time 0.01749054200001865 +[2026-05-03 07:14:59.702] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:14:59.703] [info] [gcode.cpp:914] [1969] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=1, BED_MESH_PROFILE=0 +[2026-05-03 07:14:59.703] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = true +[2026-05-03 07:14:59.703] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:14:59.710] [info] [device_status.cpp:832] [1969] M2202 result_code:1045 +[2026-05-03 07:14:59.711] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:14:59.711] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:14:59.711] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:14:59.713] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:14:59.713] [info] [extruder.cpp:501] [1969] cmd_M104 temp 210 index -1 wait true +[2026-05-03 07:14:59.713] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:210,wait:true +[2026-05-03 07:14:59.713] [info] [device_status.cpp:832] [1969] M2202 result_code:1066 +[2026-05-03 07:14:59.714] [info] [heaters.cpp:1198] [1969] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 210 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 07:15:00.606] [info] [gcode_move.cpp:52] [1969] G180 select 8 +[2026-05-03 07:15:00.606] [info] [bed_mesh.cpp:2901] [1969] cmd_BED_MESH_PROFILE: from_slicer 1 execute_calirate_from_slicer 1 +[2026-05-03 07:15:00.616] [info] [bed_mesh.cpp:463] [1969] update_status bed_mesh_exist:0x0100 +[2026-05-03 07:15:00.616] [info] [print_stats.cpp:277] [1969] bed_mesh_exist:0x0100 +[2026-05-03 07:15:00.616] [info] [bed_mesh.cpp:2875] [1969] ProfileManager::load_profile ADAPTIVE time 0.009263958000019556 +[2026-05-03 07:15:00.620] [info] [gcode.cpp:559] [1969] Unknown command: T0 +[2026-05-03 07:15:00.621] [info] [mmu.cpp:4520] [1969] M6211 start +[2026-05-03 07:15:00.621] [info] [mmu.cpp:4540] [1969] M6211 printable_height 256 T 0 A false K 75 L 10 M 523 N 523 I 0 J 179 P 5000 Q 210 S 210 R 240 C 2 D 2 +[2026-05-03 07:15:00.621] [info] [mmu.cpp:3705] [1969] get_T_channel channel 0 +[2026-05-03 07:15:00.621] [info] [mmu.cpp:4549] [1969] M6211 over! connect_status 1 use_canvas 1 feed_channel_current 0 next_extruder 0 get_T_channel 0 +[2026-05-03 07:15:00.624] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:1 +[2026-05-03 07:15:00.626] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:15:00.626] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:15:29.131] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:16:24.465] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:722.27800000038,last_temp:59.95520518572016,temp:59.95520518572016,target_temp:60,smoothed_temp:59.9523096369656 +[2026-05-03 07:16:28.616] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:726.4281271371348,last_temp:210.65927335839592,temp:210.65927335839592,target_temp:210,smoothed_temp:211.08424983679544 +[2026-05-03 07:16:39.385] [info] [clocksync.cpp:199] [2018] mcu 'mcu': New minimum RTT: sent_time=762.626732238,half_rtt=6.135399996765045e-05,freq=23999999.03274626 +[2026-05-03 07:18:07.768] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:2 +[2026-05-03 07:18:07.770] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:18:07.770] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:18:11.374] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:18:20.763] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.04902035196893737 +[2026-05-03 07:18:24.965] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:842.77800000038,last_temp:60.03505107813561,temp:60.03505107813561,target_temp:60,smoothed_temp:60.000358588700635 +[2026-05-03 07:18:28.617] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:846.4298789968317,last_temp:209.99100305591043,temp:209.99100305591043,target_temp:210,smoothed_temp:209.22528567960288 +[2026-05-03 07:18:29.677] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:18:40.596] [info] [clocksync.cpp:212] [2024] mcu 'bed_sensor': Ignoring clock sample: sent_time=883.837882504,time_avg=854.2089061066106,freq=119998162.77386424,diff=72721.50366210938(0.0006060125305175782),stddev=2994.6603202248484 +[2026-05-03 07:18:43.252] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.05160624714472606 +[2026-05-03 07:19:04.806] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:19:18.769] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.048972973566729826 +[2026-05-03 07:19:35.191] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.05148275990201857 +[2026-05-03 07:19:46.608] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:3 +[2026-05-03 07:19:46.610] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:19:46.610] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:19:49.458] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:20:10.136] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.04895645629121893 +[2026-05-03 07:20:20.037] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.051486526388007325 +[2026-05-03 07:20:25.464] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:963.27800000038,last_temp:59.99686220698152,temp:59.99686220698152,target_temp:60,smoothed_temp:60.0096302509907 +[2026-05-03 07:20:28.619] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:966.4316907095346,last_temp:209.1970169829081,temp:209.1970169829081,target_temp:210,smoothed_temp:209.92970186200478 +[2026-05-03 07:20:55.634] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.04895211605468995 +[2026-05-03 07:21:11.484] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.05147511041409642 +[2026-05-03 07:21:15.943] [error] [tmc_uart.cpp:295] [1969] _decode_read error #0 +[2026-05-03 07:21:23.781] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:4 +[2026-05-03 07:21:23.782] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:21:23.782] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:21:26.755] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:22:17.975] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:5 +[2026-05-03 07:22:17.976] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:22:17.976] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:22:20.998] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:22:25.964] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:1083.77800000038,last_temp:59.91008089223817,temp:59.91008089223817,target_temp:60,smoothed_temp:59.934485321696485 +[2026-05-03 07:22:28.620] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:1086.4336266301234,last_temp:211.9730852322282,temp:211.9730852322282,target_temp:210,smoothed_temp:211.79478873191783 +[2026-05-03 07:22:39.212] [error] [tmc_uart.cpp:295] [1969] _decode_read error #0 +[2026-05-03 07:23:08.489] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:6 +[2026-05-03 07:23:08.490] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:23:08.490] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:23:11.796] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:23:41.323] [error] [tmc_uart.cpp:295] [1969] _decode_read error #0 +[2026-05-03 07:23:56.940] [info] [clocksync.cpp:212] [2018] mcu 'mcu': Ignoring clock sample: sent_time=1200.181266405,time_avg=1170.5700581197018,freq=23999997.971194252,diff=16657.0913772583(0.0006940454740524292),stddev=580.4526278364629 +[2026-05-03 07:23:58.718] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:7 +[2026-05-03 07:23:58.719] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:23:58.719] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:24:02.036] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:24:08.753] [info] [clocksync.cpp:212] [2026] mcu 'toolhead': Ignoring clock sample: sent_time=1211.995455536,time_avg=1182.411137786548,freq=119998054.13698421,diff=77673.86688232422(0.0006472822240193685),stddev=3736.3369478024647 +[2026-05-03 07:24:26.464] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:1204.27800000038,last_temp:59.96909044880243,temp:59.96909044880243,target_temp:60,smoothed_temp:59.95866546650021 +[2026-05-03 07:24:28.622] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:1206.4355846047672,last_temp:210.44321418457798,temp:210.44321418457798,target_temp:210,smoothed_temp:209.7974797316537 +[2026-05-03 07:24:29.597] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_WRAP_FILA_FEEDBACK","result":"1"} +[2026-05-03 07:24:29.599] [info] [tangling_switch_sensor.cpp:186] [1969] exec tangling event handler +[2026-05-03 07:24:29.599] [info] [pause_resume.cpp:275] [1969] send_pause_command +[2026-05-03 07:24:29.599] [info] [virtual_sdcard.cpp:1048] [1969] do_pause +[2026-05-03 07:24:30.102] [info] [virtual_sdcard.cpp:1772] [1969] Exiting SD card print (position 451145) +[2026-05-03 07:24:30.103] [info] [print_stats.cpp:109] [1969] note_pause state paused +[2026-05-03 07:24:30.103] [info] [cavity_fan.cpp:220] [1969] handle_print_state value paused is_printing false +[2026-05-03 07:24:30.103] [info] [idle_timeout.cpp:138] [1969] handle_print_state print_state:paused +[2026-05-03 07:24:30.599] [info] [tangling_switch_sensor.cpp:240] [1969] tangling handler start! +[2026-05-03 07:24:30.600] [info] [device_status.cpp:832] [1969] M2202 result_code:2501 +[2026-05-03 07:24:30.601] [info] [pause_resume.cpp:302] [1969] cmd_PAUSE, 2501 +[2026-05-03 07:24:30.601] [info] [pause_resume.cpp:305] [1969] cmd_PAUSE print_det_state 0 +[2026-05-03 07:24:30.603] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:24:30.604] [info] [pause_resume.cpp:246] [1969] __func__:save_state #1 state_name:PAUSE_STATE_1 fan_speed:0.8509803921568627 box_fan_speed:0.1 0 +[2026-05-03 07:24:33.151] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:24:33.152] [info] [pause_resume.cpp:246] [1969] __func__:save_state #1 state_name:PAUSE_STATE_2 fan_speed:0.8509803921568627 box_fan_speed:0.1 0 +[2026-05-03 07:24:33.152] [info] [pause_resume.cpp:327] [1969] cmd_PAUSE is_goto_waste_box:1 +[2026-05-03 07:24:33.153] [info] [gcode_move.cpp:52] [1969] G180 select 800 +[2026-05-03 07:24:33.153] [info] [gcode.cpp:957] [1969] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=209.1149864426582 +[2026-05-03 07:24:33.154] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = true +[2026-05-03 07:24:33.154] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:24:34.389] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:24:34.390] [info] [pause_resume.cpp:246] [1969] __func__:save_state #1 state_name:PAUSE_STATE_3 fan_speed:0 box_fan_speed:0.1 0 +[2026-05-03 07:24:34.390] [info] [gcode_move.cpp:52] [1969] G180 select 839 +[2026-05-03 07:24:34.393] [info] [filament_motion_sensor.cpp:154] [1969] CMD_encoder_sensor_switch:false +[2026-05-03 07:24:34.394] [info] [tangling_switch_sensor.cpp:234] [1969] cmd_SET_FILAMENT_SENSOR:false +[2026-05-03 07:24:34.836] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_WRAP_FILA_FEEDBACK","result":"0"} +[2026-05-03 07:24:35.909] [info] [mmu.cpp:4396] [1969] Execute rocker arm action +[2026-05-03 07:24:36.910] [info] [mmu.cpp:4407] [1969] Execute rocker arm action complete, dir 1 channel: 0 +[2026-05-03 07:24:37.618] [info] [gcode.cpp:983] [1969] cmd_SET_CONDITION A=TANGLING_SENSOR, B=0, TANGLING_SENSOR=0 +[2026-05-03 07:24:37.618] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:24:38.325] [info] [gcode.cpp:983] [1969] cmd_SET_CONDITION A=TANGLING_SENSOR, B=0, TANGLING_SENSOR=0 +[2026-05-03 07:24:38.326] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:24:39.033] [info] [gcode.cpp:983] [1969] cmd_SET_CONDITION A=TANGLING_SENSOR, B=0, TANGLING_SENSOR=0 +[2026-05-03 07:24:39.033] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:24:39.739] [info] [gcode.cpp:983] [1969] cmd_SET_CONDITION A=TANGLING_SENSOR, B=0, TANGLING_SENSOR=0 +[2026-05-03 07:24:39.739] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:24:40.446] [info] [gcode.cpp:983] [1969] cmd_SET_CONDITION A=TANGLING_SENSOR, B=0, TANGLING_SENSOR=0 +[2026-05-03 07:24:40.446] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:24:41.153] [info] [gcode.cpp:983] [1969] cmd_SET_CONDITION A=TANGLING_SENSOR, B=0, TANGLING_SENSOR=0 +[2026-05-03 07:24:41.153] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:24:41.547] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_WRAP_FILA_FEEDBACK","result":"1"} +[2026-05-03 07:24:41.864] [info] [gcode.cpp:983] [1969] cmd_SET_CONDITION A=TANGLING_SENSOR, B=0, TANGLING_SENSOR=1 +[2026-05-03 07:24:41.864] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = true +[2026-05-03 07:24:41.865] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:24:41.866] [info] [gcode.cpp:983] [1969] cmd_SET_CONDITION A=TANGLING_SENSOR, B=1, TANGLING_SENSOR=1 +[2026-05-03 07:24:41.866] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:24:42.247] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_WRAP_FILA_FEEDBACK","result":"0"} +[2026-05-03 07:24:43.396] [info] [mmu.cpp:4396] [1969] Execute rocker arm action +[2026-05-03 07:24:44.397] [info] [mmu.cpp:4407] [1969] Execute rocker arm action complete, dir 1 channel: 0 +[2026-05-03 07:24:45.105] [info] [gcode.cpp:983] [1969] cmd_SET_CONDITION A=TANGLING_SENSOR, B=0, TANGLING_SENSOR=0 +[2026-05-03 07:24:45.105] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:24:45.814] [info] [gcode.cpp:983] [1969] cmd_SET_CONDITION A=TANGLING_SENSOR, B=0, TANGLING_SENSOR=0 +[2026-05-03 07:24:45.814] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:24:46.523] [info] [gcode.cpp:983] [1969] cmd_SET_CONDITION A=TANGLING_SENSOR, B=0, TANGLING_SENSOR=0 +[2026-05-03 07:24:46.523] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:24:47.230] [info] [gcode.cpp:983] [1969] cmd_SET_CONDITION A=TANGLING_SENSOR, B=0, TANGLING_SENSOR=0 +[2026-05-03 07:24:47.230] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:24:47.936] [info] [gcode.cpp:983] [1969] cmd_SET_CONDITION A=TANGLING_SENSOR, B=0, TANGLING_SENSOR=0 +[2026-05-03 07:24:47.936] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:24:48.644] [info] [gcode.cpp:983] [1969] cmd_SET_CONDITION A=TANGLING_SENSOR, B=0, TANGLING_SENSOR=0 +[2026-05-03 07:24:48.644] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:24:49.049] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_WRAP_FILA_FEEDBACK","result":"1"} +[2026-05-03 07:24:49.350] [info] [gcode.cpp:983] [1969] cmd_SET_CONDITION A=TANGLING_SENSOR, B=0, TANGLING_SENSOR=1 +[2026-05-03 07:24:49.350] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = true +[2026-05-03 07:24:49.352] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:24:49.355] [info] [gcode.cpp:983] [1969] cmd_SET_CONDITION A=TANGLING_SENSOR, B=1, TANGLING_SENSOR=1 +[2026-05-03 07:24:49.355] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:24:52.608] [info] [gcode_move.cpp:52] [1969] G180 select 818 +[2026-05-03 07:24:56.660] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:24:56.660] [info] [tangling_switch_sensor.cpp:234] [1969] cmd_SET_FILAMENT_SENSOR:true +[2026-05-03 07:24:56.661] [info] [filament_motion_sensor.cpp:154] [1969] CMD_encoder_sensor_switch:true +[2026-05-03 07:24:56.661] [info] [virtual_sdcard.cpp:1549] [1969] cmd_M25 +[2026-05-03 07:24:56.661] [info] [virtual_sdcard.cpp:1048] [1969] do_pause +[2026-05-03 07:24:56.662] [info] [device_status.cpp:832] [1969] M2202 result_code:2502 +[2026-05-03 07:24:56.663] [info] [device_status.cpp:989] [1969] Stop AI spaghetti detection +[2026-05-03 07:24:56.663] [info] [uds_aicamera_client.cpp:589] [1969] stop_ai_spaghetti_detection called +[2026-05-03 07:24:56.664] [info] [uds_aicamera_client.cpp:350] [1969] Sending UDS request: {"id":4,"method":"ai_detection","params":{"operate":"wire_pause"}} +[2026-05-03 07:24:56.665] [info] [pause_resume.cpp:349] [1969] cmd_PAUSE, 2502 +[2026-05-03 07:24:56.666] [info] [tangling_switch_sensor.cpp:247] [1969] tangling handler over! +[2026-05-03 07:24:56.666] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1263 error_level 1 +[2026-05-03 07:24:56.667] [info] [device_status.cpp:904] [1969] Add exception code: 1263 +[2026-05-03 07:24:56.667] [info] [uds_aicamera_client.cpp:41] [2031] Received UDS message: {"id":4,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:24:56.668] [info] [uds_aicamera_client.cpp:194] [2031] Received UDS message: {"id":4,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:24:56.668] [error] [uds_aicamera_client.cpp:196] [2031] Parsing UDS message without 'result': {"id":4,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:24:56.669] [info] [device_status.cpp:918] [1969] Report exception message: {"exception":[{"code":1263,"time":1777764296}],"id":1777764296668} to cloud success +[2026-05-03 07:24:56.773] [info] [sql_database.cpp:97] [1969] Insert SQL: INSERT INTO exception_message (code, timestamp, level, upload_flag) VALUES (?, ?, ?, ?); +[2026-05-03 07:24:56.892] [info] [device_status.cpp:924] [1969] Save exception code: [1263] to local database +[2026-05-03 07:24:56.893] [info] [device_status.cpp:947] [1969] Report exception code: 1263 +[2026-05-03 07:24:56.894] [info] [device_status.cpp:956] [1969] Report exception codes to cloud : {"exception":{"exception_code":{"1263":{"time":1777764296}}},"meta_data":{"id":1777764296893}} +[2026-05-03 07:24:56.894] [warning] [device_status.cpp:857] [1969] DeviceStatus::update_except_status: 1263 +[2026-05-03 07:24:56.895] [warning] [device_status.cpp:872] [1969] Exception Status Changed: {"machine_status":{"exception_status":[1263]}} +[2026-05-03 07:24:56.896] [info] [mmu.cpp:1520] [1969] trigger led control, channel 0 +[2026-05-03 07:25:25.609] [info] [pause_resume.cpp:425] [1969] cmd_RESUME __START +[2026-05-03 07:25:25.611] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1301 error_level 3 +[2026-05-03 07:25:25.613] [info] [pause_resume.cpp:481] [1969] emit gcode:cool_down +[2026-05-03 07:25:25.614] [info] [virtual_sdcard.cpp:1447] [1969] emit gcode:cool_down is_start_print false +[2026-05-03 07:25:25.614] [info] [mmu.cpp:4815] [1969] get_fila_type connect_status 1 fila_type.size 2 channel_color_table.size:2 +[2026-05-03 07:25:25.615] [info] [cavity_fan.cpp:255] [1969] cool_down_cavity_temp fila_type[0]:PLA,fila_type[i].size:3,fila_type.size:2 +[2026-05-03 07:25:25.615] [info] [cavity_fan.cpp:263] [1969] find_fila_type:0 fila_box_temp:40 +[2026-05-03 07:25:25.615] [info] [cavity_fan.cpp:298] [1969] std::isnan(fila_temp):false fila_box_temp:40 +[2026-05-03 07:25:25.615] [info] [cavity_fan.cpp:311] [1969] fila_box_temp:40,iType:0 +[2026-05-03 07:25:25.615] [info] [cavity_fan.cpp:255] [1969] cool_down_cavity_temp fila_type[1]:PLA,fila_type[i].size:3,fila_type.size:2 +[2026-05-03 07:25:25.615] [info] [cavity_fan.cpp:263] [1969] find_fila_type:0 fila_box_temp:40 +[2026-05-03 07:25:25.615] [info] [cavity_fan.cpp:298] [1969] std::isnan(fila_temp):false fila_box_temp:40 +[2026-05-03 07:25:25.615] [info] [cavity_fan.cpp:311] [1969] fila_box_temp:40,iType:0 +[2026-05-03 07:25:25.615] [info] [pause_resume.cpp:126] [1969] PauseResume cool_down_state 0x0e +[2026-05-03 07:25:25.615] [info] [virtual_sdcard.cpp:166] [1969] VirtualSD cool_down_state 0x0e +[2026-05-03 07:25:25.615] [info] [cavity_fan.cpp:331] [1969] update_timer(cavity_temp_timer, _NEVER +[2026-05-03 07:25:25.615] [info] [cavity_fan.cpp:333] [1969] cool_down_cavity_temp iType:0 fila_box_temp:40 cur_box_temp 27.883202252311776 cool_down_state 0x0e +[2026-05-03 07:25:25.615] [info] [device_status.cpp:832] [1969] M2202 result_code:2401 +[2026-05-03 07:25:25.616] [info] [pause_resume.cpp:490] [1969] resume start, 2401 +[2026-05-03 07:25:25.616] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1263 error_level 1 +[2026-05-03 07:25:25.617] [info] [device_status.cpp:893] [1969] Erased exception code: 1263 +[2026-05-03 07:25:25.617] [info] [device_status.cpp:904] [1969] Add exception code: 1263 +[2026-05-03 07:25:25.618] [info] [device_status.cpp:918] [1969] Report exception message: {"exception":[{"code":1263,"time":1777764325}],"id":1777764325617} to cloud success +[2026-05-03 07:25:25.619] [info] [sql_database.cpp:97] [1969] Insert SQL: INSERT INTO exception_message (code, timestamp, level, upload_flag) VALUES (?, ?, ?, ?); +[2026-05-03 07:25:25.632] [info] [device_status.cpp:924] [1969] Save exception code: [1263] to local database +[2026-05-03 07:25:25.633] [warning] [device_status.cpp:857] [1969] DeviceStatus::update_except_status: 1263 +[2026-05-03 07:25:25.633] [warning] [device_status.cpp:872] [1969] Exception Status Changed: {"machine_status":{"exception_status":[1263]}} +[2026-05-03 07:25:25.635] [info] [pause_resume.cpp:417] [1969] abnormal_check is_cover_drop false is_adc_temp_fault false false cool_down_state 0x0e +[2026-05-03 07:25:26.636] [info] [device_status.cpp:832] [1969] M2202 result_code:2403 +[2026-05-03 07:25:26.638] [info] [device_status.cpp:989] [1969] Stop AI spaghetti detection +[2026-05-03 07:25:26.638] [info] [uds_aicamera_client.cpp:589] [1969] stop_ai_spaghetti_detection called +[2026-05-03 07:25:26.639] [info] [uds_aicamera_client.cpp:350] [1969] Sending UDS request: {"id":5,"method":"ai_detection","params":{"operate":"wire_pause"}} +[2026-05-03 07:25:26.641] [info] [uds_aicamera_client.cpp:41] [2031] Received UDS message: {"id":5,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:25:26.642] [info] [uds_aicamera_client.cpp:194] [2031] Received UDS message: {"id":5,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:25:26.642] [error] [pause_resume.cpp:498] [1969] resume abnormal, 2403 +[2026-05-03 07:25:26.642] [error] [uds_aicamera_client.cpp:196] [2031] Parsing UDS message without 'result': {"id":5,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:25:26.642] [info] [webhooks.cpp:170] [1969] return total: {"id":41,"result":{}} +[2026-05-03 07:25:52.726] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_FEEDING_FILA_REQUEST","result":"0"} +[2026-05-03 07:25:52.727] [info] [mmu.cpp:2068] [1969] {"command":"M2202","result":"1160"} +[2026-05-03 07:25:52.727] [info] [device_status.cpp:832] [1969] M2202 result_code:1160 +[2026-05-03 07:25:52.729] [info] [mmu.cpp:3903] [1969] Execute filament retraction from the extruder head +[2026-05-03 07:25:52.729] [info] [mmu.cpp:2068] [1969] {"command":"M2202","result":"1161"} +[2026-05-03 07:25:52.729] [info] [device_status.cpp:832] [1969] M2202 result_code:1161 +[2026-05-03 07:25:52.731] [info] [mmu.cpp:4082] [1969] Move to waste box +[2026-05-03 07:25:52.731] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:25:52.731] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:25:52.732] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:25:52.732] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:25:52.733] [info] [extruder.cpp:501] [1969] cmd_M104 temp 250 index -1 wait false +[2026-05-03 07:25:52.733] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:250,wait:false +[2026-05-03 07:25:52.978] [info] [verify_heater.cpp:164] [1969] Heater extruder approaching new target of 250 +[2026-05-03 07:25:53.035] [info] [homing_override.cpp:238] [1969] need true true false homed true true true +[2026-05-03 07:25:53.035] [info] [gcode_move.cpp:52] [1969] G180 select 800 +[2026-05-03 07:25:53.036] [info] [gcode.cpp:957] [1969] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=209.56149930162843 +[2026-05-03 07:25:53.036] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = true +[2026-05-03 07:25:53.037] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:25:53.040] [info] [device_status.cpp:832] [1969] M2202 result_code:1045 +[2026-05-03 07:25:53.041] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:25:53.041] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:25:53.041] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:25:53.041] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:25:53.041] [info] [extruder.cpp:501] [1969] cmd_M104 temp 250 index -1 wait true +[2026-05-03 07:25:53.042] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:250,wait:true +[2026-05-03 07:26:07.992] [info] [verify_heater.cpp:140] [1969] Heater extruder within range of 250 +[2026-05-03 07:26:13.055] [info] [device_status.cpp:832] [1969] M2202 result_code:1066 +[2026-05-03 07:26:13.056] [info] [heaters.cpp:1198] [1969] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 250 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 07:26:13.056] [info] [mmu.cpp:2068] [1969] {"command":"M2202","result":"1162"} +[2026-05-03 07:26:13.056] [info] [device_status.cpp:832] [1969] M2202 result_code:1162 +[2026-05-03 07:26:13.058] [info] [mmu.cpp:2493] [1969] start extrude channel check. +[2026-05-03 07:26:13.058] [info] [mmu.cpp:2502] [1969] extrude channel check result: 0 ex_fila_status:1 +[2026-05-03 07:26:13.058] [info] [mmu.cpp:2068] [1969] {"command":"M2202","result":"1163"} +[2026-05-03 07:26:13.059] [info] [device_status.cpp:832] [1969] M2202 result_code:1163 +[2026-05-03 07:26:13.061] [info] [mmu.cpp:4204] [1969] Execute cutting action +[2026-05-03 07:26:13.063] [info] [homing_override.cpp:238] [1969] need true true false homed true true true +[2026-05-03 07:26:13.064] [info] [gcode_move.cpp:52] [1969] G180 select 813 +[2026-05-03 07:26:13.065] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.1038602970588235 +[2026-05-03 07:26:13.391] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_WRAP_FILA_FEEDBACK","result":"0"} +[2026-05-03 07:26:16.410] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"1"} +[2026-05-03 07:26:16.421] [info] [cutting_switch_sensor.cpp:103] [1969] cutting detect state:true +[2026-05-03 07:26:17.033] [info] [gcode_move.cpp:52] [1969] G180 select 815 +[2026-05-03 07:26:17.846] [info] [gcode_move.cpp:52] [1969] G180 select 800 +[2026-05-03 07:26:17.847] [info] [gcode.cpp:957] [1969] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=251.5091198420166 +[2026-05-03 07:26:17.847] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = true +[2026-05-03 07:26:17.848] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:26:18.261] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"0"} +[2026-05-03 07:26:18.262] [info] [cutting_switch_sensor.cpp:103] [1969] cutting detect state:false +[2026-05-03 07:26:20.523] [info] [gcode_move.cpp:52] [1969] G180 select 816 +[2026-05-03 07:26:21.483] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_WRAP_FILA_FEEDBACK","result":"1"} +[2026-05-03 07:26:22.437] [info] [mmu.cpp:4396] [1969] Execute rocker arm action +[2026-05-03 07:26:22.895] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_WRAP_FILA_FEEDBACK","result":"0"} +[2026-05-03 07:26:23.438] [info] [mmu.cpp:4407] [1969] Execute rocker arm action complete, dir -1 channel: 0 +[2026-05-03 07:26:23.438] [info] [mmu.cpp:4235] [1969] Execute cutting action. complete +[2026-05-03 07:26:23.438] [info] [mmu.cpp:2068] [1969] {"command":"M2202","result":"1164"} +[2026-05-03 07:26:23.439] [info] [device_status.cpp:832] [1969] M2202 result_code:1164 +[2026-05-03 07:26:23.440] [info] [mmu.cpp:4256] [1969] Execute extruder head filament plug out. channel: 0 +[2026-05-03 07:26:23.441] [info] [mmu.cpp:2206] [1969] status[channel] 2 fila_in[channel] 1 +[2026-05-03 07:26:23.441] [info] [mmu.cpp:2246] [1969] clean_waste __OVER +[2026-05-03 07:26:23.441] [info] [mmu.cpp:4396] [1969] Execute rocker arm action +[2026-05-03 07:26:24.442] [info] [mmu.cpp:4407] [1969] Execute rocker arm action complete, dir -1 channel: 0 +[2026-05-03 07:26:25.358] [info] [mmu.cpp:2266] [1969] retract last_pos_1 channel: 0 ch_1: 2090.792742817079 ch_2: 162.4203401905923 ch_3: 0 ch_4: 0 +[2026-05-03 07:26:25.840] [info] [filament_switch_sensor.cpp:332] [1969] _button_handler switch_fila_det false +[2026-05-03 07:26:25.841] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"0"} +[2026-05-03 07:26:26.964] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:1324.77800000038,last_temp:59.899668200107044,temp:59.899668200107044,target_temp:60,smoothed_temp:59.88783885781082 +[2026-05-03 07:26:27.297] [info] [mmu.cpp:2289] [1969] ex_fila_status 0 channel 0 pre_pos 2090.792742817079 cur_pos 2194.151141120183 +[2026-05-03 07:26:27.297] [info] [mmu.cpp:2296] [1969] retract cur_pos_1 channel: 0 ch_1: 2194.151141120183 ch_2: 162.4203401905923 ch_3: 0 ch_4: 0 +[2026-05-03 07:26:27.298] [info] [mmu.cpp:4306] [1969] Execute extruder head filament plug out complete, channel: 0 +[2026-05-03 07:26:27.298] [info] [extruder.cpp:501] [1969] cmd_M104 temp 0 index -1 wait false +[2026-05-03 07:26:27.298] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:0,wait:false +[2026-05-03 07:26:27.299] [info] [mmu.cpp:2068] [1969] {"command":"M2202","result":"1165"} +[2026-05-03 07:26:27.299] [info] [device_status.cpp:832] [1969] M2202 result_code:1165 +[2026-05-03 07:26:27.301] [info] [device_status.cpp:989] [1969] Stop AI spaghetti detection +[2026-05-03 07:26:27.301] [info] [uds_aicamera_client.cpp:589] [1969] stop_ai_spaghetti_detection called +[2026-05-03 07:26:27.301] [info] [uds_aicamera_client.cpp:350] [1969] Sending UDS request: {"id":6,"method":"ai_detection","params":{"operate":"wire_pause"}} +[2026-05-03 07:26:27.302] [info] [mmu.cpp:4752] [1969] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 07:26:27.303] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1210 error_level 3 +[2026-05-03 07:26:27.303] [info] [uds_aicamera_client.cpp:41] [2031] Received UDS message: {"id":6,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:26:27.304] [info] [uds_aicamera_client.cpp:194] [2031] Received UDS message: {"id":6,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:26:27.304] [error] [uds_aicamera_client.cpp:196] [2031] Parsing UDS message without 'result': {"id":6,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:26:27.305] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1211 error_level 3 +[2026-05-03 07:26:27.306] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1220 error_level 3 +[2026-05-03 07:26:27.308] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1231 error_level 3 +[2026-05-03 07:26:27.309] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1232 error_level 3 +[2026-05-03 07:26:27.310] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1241 error_level 3 +[2026-05-03 07:26:27.310] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1242 error_level 3 +[2026-05-03 07:26:27.312] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1243 error_level 3 +[2026-05-03 07:26:27.313] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1251 error_level 3 +[2026-05-03 07:26:27.314] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1252 error_level 3 +[2026-05-03 07:26:27.315] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1265 error_level 3 +[2026-05-03 07:26:27.316] [info] [mmu.cpp:4747] [1969] clear_abnormal_feedback #1 __OVER +[2026-05-03 07:26:27.316] [info] [mmu.cpp:3925] [1969] Execute filament retraction from the extruder head. complete +[2026-05-03 07:26:27.317] [info] [webhooks.cpp:170] [1969] return total: {"id":42,"result":{}} +[2026-05-03 07:26:28.623] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:1326.4376003432908,last_temp:250.54925573466392,temp:250.54925573466392,target_temp:0,smoothed_temp:250.44504782758807 +[2026-05-03 07:26:33.213] [info] [pause_resume.cpp:425] [1969] cmd_RESUME __START +[2026-05-03 07:26:33.213] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1301 error_level 3 +[2026-05-03 07:26:33.214] [info] [pause_resume.cpp:481] [1969] emit gcode:cool_down +[2026-05-03 07:26:33.215] [info] [virtual_sdcard.cpp:1447] [1969] emit gcode:cool_down is_start_print false +[2026-05-03 07:26:33.216] [info] [mmu.cpp:4815] [1969] get_fila_type connect_status 1 fila_type.size 2 channel_color_table.size:2 +[2026-05-03 07:26:33.216] [info] [cavity_fan.cpp:255] [1969] cool_down_cavity_temp fila_type[0]:PLA,fila_type[i].size:3,fila_type.size:2 +[2026-05-03 07:26:33.216] [info] [cavity_fan.cpp:263] [1969] find_fila_type:0 fila_box_temp:40 +[2026-05-03 07:26:33.216] [info] [cavity_fan.cpp:298] [1969] std::isnan(fila_temp):false fila_box_temp:40 +[2026-05-03 07:26:33.216] [info] [cavity_fan.cpp:311] [1969] fila_box_temp:40,iType:0 +[2026-05-03 07:26:33.216] [info] [cavity_fan.cpp:255] [1969] cool_down_cavity_temp fila_type[1]:PLA,fila_type[i].size:3,fila_type.size:2 +[2026-05-03 07:26:33.216] [info] [cavity_fan.cpp:263] [1969] find_fila_type:0 fila_box_temp:40 +[2026-05-03 07:26:33.216] [info] [cavity_fan.cpp:298] [1969] std::isnan(fila_temp):false fila_box_temp:40 +[2026-05-03 07:26:33.216] [info] [cavity_fan.cpp:311] [1969] fila_box_temp:40,iType:0 +[2026-05-03 07:26:33.216] [info] [pause_resume.cpp:126] [1969] PauseResume cool_down_state 0x0e +[2026-05-03 07:26:33.216] [info] [virtual_sdcard.cpp:166] [1969] VirtualSD cool_down_state 0x0e +[2026-05-03 07:26:33.216] [info] [cavity_fan.cpp:331] [1969] update_timer(cavity_temp_timer, _NEVER +[2026-05-03 07:26:33.216] [info] [cavity_fan.cpp:333] [1969] cool_down_cavity_temp iType:0 fila_box_temp:40 cur_box_temp 28.013055546611042 cool_down_state 0x0e +[2026-05-03 07:26:33.217] [info] [device_status.cpp:832] [1969] M2202 result_code:2401 +[2026-05-03 07:26:33.219] [info] [pause_resume.cpp:490] [1969] resume start, 2401 +[2026-05-03 07:26:33.220] [info] [pause_resume.cpp:417] [1969] abnormal_check is_cover_drop false is_adc_temp_fault false false cool_down_state 0x0e +[2026-05-03 07:26:33.221] [info] [pause_resume.cpp:515] [1969] cmd_RESUME is_goto_waste_box:1 +[2026-05-03 07:26:33.222] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.07712407067965975 +[2026-05-03 07:26:33.223] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:26:33.224] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:26:33.224] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:26:33.225] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:26:33.226] [info] [extruder.cpp:501] [1969] cmd_M104 temp 210 index -1 wait false +[2026-05-03 07:26:33.226] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:210,wait:false +[2026-05-03 07:26:33.226] [info] [heater_bed.cpp:57] [1969] cmd_M140 temp 60 wait false +[2026-05-03 07:26:33.227] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 07:26:33.227] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 07:26:33.227] [info] [gcode.cpp:544] [1969] respond_ecode: Heater heater_bed not heating at expected rate, error_code: 101 error_level 3 +[2026-05-03 07:26:33.228] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 07:26:33.228] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:60,wait:false +[2026-05-03 07:26:33.229] [info] [gcode_move.cpp:52] [1969] G180 select 800 +[2026-05-03 07:26:33.230] [info] [gcode.cpp:957] [1969] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=244.3813973312457 +[2026-05-03 07:26:33.230] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = true +[2026-05-03 07:26:33.231] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:26:34.048] [info] [mmu.cpp:3985] [1969] Execute filament switch process, retry:0 +[2026-05-03 07:26:34.049] [info] [mmu.cpp:3988] [1969] T: 0 +[2026-05-03 07:26:34.049] [info] [mmu.cpp:3705] [1969] get_T_channel channel 0 +[2026-05-03 07:26:34.050] [info] [mmu.cpp:3998] [1969] CMD_canvas_switch_filament channel 0 fila_in[channel] 1 ex_fila_status 0 +[2026-05-03 07:26:34.050] [info] [mmu.cpp:2493] [1969] start extrude channel check. +[2026-05-03 07:26:34.050] [info] [mmu.cpp:2502] [1969] extrude channel check result: -1 ex_fila_status:0 +[2026-05-03 07:26:34.051] [info] [mmu.cpp:4201] [1969] Extruder head filament sensor not triggered +[2026-05-03 07:26:34.051] [info] [mmu.cpp:4243] [1969] Extruder head filament sensor not triggered +[2026-05-03 07:26:34.052] [info] [mmu.cpp:4330] [1969] Execute filament plug in process. channel: 0 +[2026-05-03 07:26:34.052] [info] [mmu.cpp:2859] [1969] exec auto refill filament start, befor_channel 0 ex_fila_status 0 canvas_status 1 +[2026-05-03 07:26:34.052] [info] [mmu.cpp:2911] [1969] exec auto refill filament over, after_channel 0 ex_fila_status 0 canvas_status 1 +[2026-05-03 07:26:34.052] [info] [mmu.cpp:2356] [1969] feed last_pos_1 channel: 0 ch_1: 2194.151141120183 ch_2: 162.4203401905923 ch_3: 0 ch_4: 0 +[2026-05-03 07:26:37.245] [info] [filament_switch_sensor.cpp:332] [1969] _button_handler switch_fila_det true +[2026-05-03 07:26:37.245] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-03 07:26:38.182] [info] [mmu.cpp:2395] [1969] feed last_pos_2 channel: 0 ch_1: 2300.462636517662 ch_2: 162.4203401905923 ch_3: 0 ch_4: 0 +[2026-05-03 07:26:38.182] [info] [gcode_move.cpp:52] [1969] G180 select 820 +[2026-05-03 07:26:42.513] [info] [mmu.cpp:4396] [1969] Execute rocker arm action +[2026-05-03 07:26:43.424] [error] [tmc_uart.cpp:295] [1969] _decode_read error #0 +[2026-05-03 07:26:43.514] [info] [mmu.cpp:4407] [1969] Execute rocker arm action complete, dir 1 channel: 0 +[2026-05-03 07:26:43.515] [info] [mmu.cpp:2400] [1969] retry_count 1 last_position 2300.462636517662 ch_position 2306.368830706411 +[2026-05-03 07:26:43.515] [info] [mmu.cpp:2406] [1969] feed cur_pos_2 channel: 0 ch_1: 2306.368830706411 ch_2: 162.4203401905923 ch_3: 0 ch_4: 0 +[2026-05-03 07:26:43.515] [info] [gcode_move.cpp:52] [1969] G180 select 820 +[2026-05-03 07:26:47.855] [info] [mmu.cpp:4396] [1969] Execute rocker arm action +[2026-05-03 07:26:48.856] [info] [mmu.cpp:4407] [1969] Execute rocker arm action complete, dir 1 channel: 0 +[2026-05-03 07:26:48.856] [info] [mmu.cpp:2400] [1969] retry_count 2 last_position 2300.462636517662 ch_position 2312.2750248951597 +[2026-05-03 07:26:48.856] [info] [mmu.cpp:2406] [1969] feed cur_pos_2 channel: 0 ch_1: 2312.2750248951597 ch_2: 162.4203401905923 ch_3: 0 ch_4: 0 +[2026-05-03 07:26:48.856] [info] [mmu.cpp:2423] [1969] extruder_feed success, channel = 0 +[2026-05-03 07:26:48.856] [info] [mmu.cpp:4340] [1969] Execute filament plug in process complete. channel: 0 +[2026-05-03 07:26:48.857] [info] [mmu.cpp:4752] [1969] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 07:26:48.857] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1210 error_level 3 +[2026-05-03 07:26:48.857] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1211 error_level 3 +[2026-05-03 07:26:48.858] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1220 error_level 3 +[2026-05-03 07:26:48.858] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1231 error_level 3 +[2026-05-03 07:26:48.859] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1232 error_level 3 +[2026-05-03 07:26:48.859] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1241 error_level 3 +[2026-05-03 07:26:48.859] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1242 error_level 3 +[2026-05-03 07:26:48.860] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1243 error_level 3 +[2026-05-03 07:26:48.861] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1251 error_level 3 +[2026-05-03 07:26:48.861] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1252 error_level 3 +[2026-05-03 07:26:48.861] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1265 error_level 3 +[2026-05-03 07:26:48.862] [info] [mmu.cpp:4747] [1969] clear_abnormal_feedback #1 __OVER +[2026-05-03 07:26:48.862] [info] [mmu.cpp:4017] [1969] Execute filament switch process complete, channel 0 +[2026-05-03 07:26:48.862] [info] [pause_resume.cpp:583] [1969] cmd_RESUME is_goto_waste_box:1 +[2026-05-03 07:26:48.862] [info] [gcode_move.cpp:52] [1969] G180 select 812 +[2026-05-03 07:26:50.435] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_WRAP_FILA_FEEDBACK","result":"1"} +[2026-05-03 07:26:51.971] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_WRAP_FILA_FEEDBACK","result":"0"} +[2026-05-03 07:27:01.850] [info] [gcode_move.cpp:52] [1969] G180 select 818 +[2026-05-03 07:27:01.851] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.04920152019072035 +[2026-05-03 07:27:05.903] [info] [pause_resume.cpp:589] [1969] __func__:cmd_RESUME #1 fan_speed:M106 S217.000000 +[2026-05-03 07:27:05.903] [info] [pause_resume.cpp:592] [1969] __func__:cmd_RESUME #1 fan1_speed:M106 P2 S0.000000 +[2026-05-03 07:27:05.908] [info] [pause_resume.cpp:619] [1969] cmd_RESUME is_goto_waste_box:1 +[2026-05-03 07:27:05.911] [info] [gcode_move.cpp:772] [1969] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 07:27:05.911] [info] [virtual_sdcard.cpp:1061] [1969] do_resume +[2026-05-03 07:27:05.912] [info] [device_status.cpp:832] [1969] M2202 result_code:2402 +[2026-05-03 07:27:05.915] [info] [pause_resume.cpp:648] [1969] resume over, 2402 +[2026-05-03 07:27:05.915] [info] [webhooks.cpp:170] [1969] return total: {"id":43,"result":{}} +[2026-05-03 07:27:05.916] [info] [virtual_sdcard.cpp:1613] [1969] Starting SD card print (position 451145) +[2026-05-03 07:27:05.917] [info] [print_stats.cpp:90] [1969] note_start state printing +[2026-05-03 07:27:05.917] [info] [cavity_fan.cpp:189] [1969] update_timer(fan_timer, _NOW +[2026-05-03 07:27:05.917] [info] [cavity_fan.cpp:190] [1969] value printing is_printing true +[2026-05-03 07:27:05.917] [info] [idle_timeout.cpp:138] [1969] handle_print_state print_state:printing +[2026-05-03 07:27:05.925] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1263 error_level 3 +[2026-05-03 07:27:05.925] [info] [device_status.cpp:893] [1969] Erased exception code: 1263 +[2026-05-03 07:27:05.926] [info] [device_status.cpp:956] [1969] Report exception codes to cloud : {"exception":{"exception_code":{}},"meta_data":{"id":1777764425926}} +[2026-05-03 07:27:10.017] [info] [device_status.cpp:832] [1969] M2202 result_code:2501 +[2026-05-03 07:27:10.018] [info] [pause_resume.cpp:302] [1969] cmd_PAUSE, 2501 +[2026-05-03 07:27:10.019] [info] [pause_resume.cpp:305] [1969] cmd_PAUSE print_det_state 0 +[2026-05-03 07:27:10.019] [info] [pause_resume.cpp:275] [1969] send_pause_command +[2026-05-03 07:27:10.019] [info] [virtual_sdcard.cpp:1048] [1969] do_pause +[2026-05-03 07:27:10.020] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:27:10.022] [info] [pause_resume.cpp:246] [1969] __func__:save_state #1 state_name:PAUSE_STATE_1 fan_speed:0.8509803921568627 box_fan_speed:0.1 0 +[2026-05-03 07:27:10.116] [info] [virtual_sdcard.cpp:1772] [1969] Exiting SD card print (position 455677) +[2026-05-03 07:27:10.116] [info] [print_stats.cpp:109] [1969] note_pause state paused +[2026-05-03 07:27:10.117] [info] [cavity_fan.cpp:220] [1969] handle_print_state value paused is_printing false +[2026-05-03 07:27:10.117] [info] [idle_timeout.cpp:138] [1969] handle_print_state print_state:paused +[2026-05-03 07:27:12.755] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:27:12.756] [info] [pause_resume.cpp:246] [1969] __func__:save_state #1 state_name:PAUSE_STATE_2 fan_speed:0.8509803921568627 box_fan_speed:0.1 0 +[2026-05-03 07:27:12.756] [info] [pause_resume.cpp:327] [1969] cmd_PAUSE is_goto_waste_box:1 +[2026-05-03 07:27:12.756] [info] [gcode_move.cpp:52] [1969] G180 select 800 +[2026-05-03 07:27:12.757] [info] [gcode.cpp:957] [1969] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=209.285252229619 +[2026-05-03 07:27:12.758] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = true +[2026-05-03 07:27:12.758] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:27:13.996] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:27:13.997] [info] [pause_resume.cpp:246] [1969] __func__:save_state #1 state_name:PAUSE_STATE_3 fan_speed:0 box_fan_speed:0.1 0 +[2026-05-03 07:27:13.998] [info] [gcode_move.cpp:52] [1969] G180 select 0 +[2026-05-03 07:27:13.998] [info] [virtual_sdcard.cpp:1549] [1969] cmd_M25 +[2026-05-03 07:27:13.998] [info] [virtual_sdcard.cpp:1048] [1969] do_pause +[2026-05-03 07:27:13.999] [info] [device_status.cpp:832] [1969] M2202 result_code:2502 +[2026-05-03 07:27:14.000] [info] [device_status.cpp:989] [1969] Stop AI spaghetti detection +[2026-05-03 07:27:14.000] [info] [uds_aicamera_client.cpp:589] [1969] stop_ai_spaghetti_detection called +[2026-05-03 07:27:14.000] [info] [uds_aicamera_client.cpp:350] [1969] Sending UDS request: {"id":7,"method":"ai_detection","params":{"operate":"wire_pause"}} +[2026-05-03 07:27:14.002] [info] [uds_aicamera_client.cpp:41] [2031] Received UDS message: {"id":7,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:27:14.003] [info] [uds_aicamera_client.cpp:194] [2031] Received UDS message: {"id":7,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:27:14.003] [error] [uds_aicamera_client.cpp:196] [2031] Parsing UDS message without 'result': {"id":7,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:27:14.003] [info] [pause_resume.cpp:349] [1969] cmd_PAUSE, 2502 +[2026-05-03 07:27:14.004] [info] [webhooks.cpp:170] [1969] return total: {"id":44,"result":{}} +[2026-05-03 07:27:20.408] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_FEEDING_FILA_REQUEST","result":"0"} +[2026-05-03 07:27:20.409] [info] [mmu.cpp:2068] [1969] {"command":"M2202","result":"1160"} +[2026-05-03 07:27:20.409] [info] [device_status.cpp:832] [1969] M2202 result_code:1160 +[2026-05-03 07:27:20.411] [info] [mmu.cpp:3903] [1969] Execute filament retraction from the extruder head +[2026-05-03 07:27:20.411] [info] [mmu.cpp:2068] [1969] {"command":"M2202","result":"1161"} +[2026-05-03 07:27:20.412] [info] [device_status.cpp:832] [1969] M2202 result_code:1161 +[2026-05-03 07:27:20.414] [info] [mmu.cpp:4082] [1969] Move to waste box +[2026-05-03 07:27:20.414] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:27:20.414] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:27:20.414] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:27:20.415] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:27:20.415] [info] [extruder.cpp:501] [1969] cmd_M104 temp 250 index -1 wait false +[2026-05-03 07:27:20.415] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:250,wait:false +[2026-05-03 07:27:20.719] [info] [homing_override.cpp:238] [1969] need true true false homed true true true +[2026-05-03 07:27:20.719] [info] [gcode_move.cpp:52] [1969] G180 select 800 +[2026-05-03 07:27:20.720] [info] [gcode.cpp:957] [1969] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=209.1284037223773 +[2026-05-03 07:27:20.720] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = true +[2026-05-03 07:27:20.720] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:27:20.723] [info] [device_status.cpp:832] [1969] M2202 result_code:1045 +[2026-05-03 07:27:20.725] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:27:20.725] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:27:20.725] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:27:20.726] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:27:20.727] [info] [extruder.cpp:501] [1969] cmd_M104 temp 250 index -1 wait true +[2026-05-03 07:27:20.727] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:250,wait:true +[2026-05-03 07:27:21.082] [info] [verify_heater.cpp:164] [1969] Heater extruder approaching new target of 250 +[2026-05-03 07:27:32.647] [info] [clocksync.cpp:212] [2024] mcu 'bed_sensor': Ignoring clock sample: sent_time=1415.889541716,time_avg=1386.3541559495213,freq=119998205.00017181,diff=60596.29443359375(0.0005049691202799479),stddev=6460.237101481637 +[2026-05-03 07:27:34.097] [info] [verify_heater.cpp:140] [1969] Heater extruder within range of 250 +[2026-05-03 07:27:40.739] [info] [device_status.cpp:832] [1969] M2202 result_code:1066 +[2026-05-03 07:27:40.741] [info] [heaters.cpp:1198] [1969] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 250 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 07:27:40.742] [info] [mmu.cpp:2068] [1969] {"command":"M2202","result":"1162"} +[2026-05-03 07:27:40.743] [info] [device_status.cpp:832] [1969] M2202 result_code:1162 +[2026-05-03 07:27:40.745] [info] [mmu.cpp:2493] [1969] start extrude channel check. +[2026-05-03 07:27:40.745] [info] [mmu.cpp:2502] [1969] extrude channel check result: 0 ex_fila_status:1 +[2026-05-03 07:27:40.746] [info] [mmu.cpp:2068] [1969] {"command":"M2202","result":"1163"} +[2026-05-03 07:27:40.746] [info] [device_status.cpp:832] [1969] M2202 result_code:1163 +[2026-05-03 07:27:40.747] [info] [mmu.cpp:4204] [1969] Execute cutting action +[2026-05-03 07:27:40.748] [info] [homing_override.cpp:238] [1969] need true true false homed true true true +[2026-05-03 07:27:40.748] [info] [gcode_move.cpp:52] [1969] G180 select 813 +[2026-05-03 07:27:40.750] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.1038602970588235 +[2026-05-03 07:27:44.107] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"1"} +[2026-05-03 07:27:44.117] [info] [cutting_switch_sensor.cpp:103] [1969] cutting detect state:true +[2026-05-03 07:27:44.727] [info] [gcode_move.cpp:52] [1969] G180 select 815 +[2026-05-03 07:27:45.536] [info] [gcode_move.cpp:52] [1969] G180 select 800 +[2026-05-03 07:27:45.537] [info] [gcode.cpp:957] [1969] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=251.30978947410017 +[2026-05-03 07:27:45.537] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = true +[2026-05-03 07:27:45.538] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:27:45.950] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"0"} +[2026-05-03 07:27:45.951] [info] [cutting_switch_sensor.cpp:103] [1969] cutting detect state:false +[2026-05-03 07:27:48.129] [info] [gcode_move.cpp:52] [1969] G180 select 816 +[2026-05-03 07:27:50.047] [info] [mmu.cpp:4396] [1969] Execute rocker arm action +[2026-05-03 07:27:51.047] [info] [mmu.cpp:4407] [1969] Execute rocker arm action complete, dir -1 channel: 0 +[2026-05-03 07:27:51.047] [info] [mmu.cpp:4235] [1969] Execute cutting action. complete +[2026-05-03 07:27:51.048] [info] [mmu.cpp:2068] [1969] {"command":"M2202","result":"1164"} +[2026-05-03 07:27:51.048] [info] [device_status.cpp:832] [1969] M2202 result_code:1164 +[2026-05-03 07:27:51.050] [info] [mmu.cpp:4256] [1969] Execute extruder head filament plug out. channel: 0 +[2026-05-03 07:27:51.050] [info] [mmu.cpp:2206] [1969] status[channel] 2 fila_in[channel] 1 +[2026-05-03 07:27:51.050] [info] [mmu.cpp:2246] [1969] clean_waste __OVER +[2026-05-03 07:27:51.051] [info] [mmu.cpp:4396] [1969] Execute rocker arm action +[2026-05-03 07:27:52.052] [info] [mmu.cpp:4407] [1969] Execute rocker arm action complete, dir -1 channel: 0 +[2026-05-03 07:27:52.967] [info] [mmu.cpp:2266] [1969] retract last_pos_1 channel: 0 ch_1: 2421.5396173870126 ch_2: 162.4203401905923 ch_3: 0 ch_4: 0 +[2026-05-03 07:27:53.475] [info] [filament_switch_sensor.cpp:332] [1969] _button_handler switch_fila_det false +[2026-05-03 07:27:53.476] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"0"} +[2026-05-03 07:27:54.906] [info] [mmu.cpp:2289] [1969] ex_fila_status 0 channel 0 pre_pos 2421.5396173870126 cur_pos 2518.991821501368 +[2026-05-03 07:27:54.907] [info] [mmu.cpp:2296] [1969] retract cur_pos_1 channel: 0 ch_1: 2518.991821501368 ch_2: 162.4203401905923 ch_3: 0 ch_4: 0 +[2026-05-03 07:27:54.907] [info] [mmu.cpp:4306] [1969] Execute extruder head filament plug out complete, channel: 0 +[2026-05-03 07:27:54.908] [info] [extruder.cpp:501] [1969] cmd_M104 temp 0 index -1 wait false +[2026-05-03 07:27:54.908] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:0,wait:false +[2026-05-03 07:27:54.908] [info] [mmu.cpp:2068] [1969] {"command":"M2202","result":"1165"} +[2026-05-03 07:27:54.909] [info] [device_status.cpp:832] [1969] M2202 result_code:1165 +[2026-05-03 07:27:54.910] [info] [device_status.cpp:989] [1969] Stop AI spaghetti detection +[2026-05-03 07:27:54.910] [info] [uds_aicamera_client.cpp:589] [1969] stop_ai_spaghetti_detection called +[2026-05-03 07:27:54.910] [info] [uds_aicamera_client.cpp:350] [1969] Sending UDS request: {"id":8,"method":"ai_detection","params":{"operate":"wire_pause"}} +[2026-05-03 07:27:54.910] [info] [mmu.cpp:4752] [1969] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 07:27:54.910] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1210 error_level 3 +[2026-05-03 07:27:54.911] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1211 error_level 3 +[2026-05-03 07:27:54.912] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1220 error_level 3 +[2026-05-03 07:27:54.912] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1231 error_level 3 +[2026-05-03 07:27:54.913] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1232 error_level 3 +[2026-05-03 07:27:54.913] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1241 error_level 3 +[2026-05-03 07:27:54.914] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1242 error_level 3 +[2026-05-03 07:27:54.914] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1243 error_level 3 +[2026-05-03 07:27:54.915] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1251 error_level 3 +[2026-05-03 07:27:54.915] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1252 error_level 3 +[2026-05-03 07:27:54.915] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1265 error_level 3 +[2026-05-03 07:27:54.916] [info] [mmu.cpp:4747] [1969] clear_abnormal_feedback #1 __OVER +[2026-05-03 07:27:54.916] [info] [mmu.cpp:3925] [1969] Execute filament retraction from the extruder head. complete +[2026-05-03 07:27:54.916] [info] [webhooks.cpp:170] [1969] return total: {"id":45,"result":{}} +[2026-05-03 07:27:54.918] [info] [uds_aicamera_client.cpp:41] [2031] Received UDS message: {"id":8,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:27:54.918] [info] [uds_aicamera_client.cpp:194] [2031] Received UDS message: {"id":8,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:27:54.918] [error] [uds_aicamera_client.cpp:196] [2031] Parsing UDS message without 'result': {"id":8,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:28:27.463] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:1445.27800000038,last_temp:60.30941169437341,temp:60.30941169437341,target_temp:60,smoothed_temp:60.33801927698641 +[2026-05-03 07:28:28.625] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:1446.43954419983,last_temp:213.53320696475373,temp:213.53320696475373,target_temp:0,smoothed_temp:214.00410356952142 +[2026-05-03 07:28:46.489] [error] [tmc_uart.cpp:295] [1969] _decode_read error #0 +[2026-05-03 07:29:01.516] [info] [pause_resume.cpp:425] [1969] cmd_RESUME __START +[2026-05-03 07:29:01.516] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1301 error_level 3 +[2026-05-03 07:29:01.517] [info] [pause_resume.cpp:481] [1969] emit gcode:cool_down +[2026-05-03 07:29:01.518] [info] [virtual_sdcard.cpp:1447] [1969] emit gcode:cool_down is_start_print false +[2026-05-03 07:29:01.518] [info] [mmu.cpp:4815] [1969] get_fila_type connect_status 1 fila_type.size 2 channel_color_table.size:2 +[2026-05-03 07:29:01.518] [info] [cavity_fan.cpp:255] [1969] cool_down_cavity_temp fila_type[0]:PLA,fila_type[i].size:3,fila_type.size:2 +[2026-05-03 07:29:01.518] [info] [cavity_fan.cpp:263] [1969] find_fila_type:0 fila_box_temp:40 +[2026-05-03 07:29:01.518] [info] [cavity_fan.cpp:298] [1969] std::isnan(fila_temp):false fila_box_temp:40 +[2026-05-03 07:29:01.519] [info] [cavity_fan.cpp:311] [1969] fila_box_temp:40,iType:0 +[2026-05-03 07:29:01.519] [info] [cavity_fan.cpp:255] [1969] cool_down_cavity_temp fila_type[1]:PLA,fila_type[i].size:3,fila_type.size:2 +[2026-05-03 07:29:01.519] [info] [cavity_fan.cpp:263] [1969] find_fila_type:0 fila_box_temp:40 +[2026-05-03 07:29:01.519] [info] [cavity_fan.cpp:298] [1969] std::isnan(fila_temp):false fila_box_temp:40 +[2026-05-03 07:29:01.519] [info] [cavity_fan.cpp:311] [1969] fila_box_temp:40,iType:0 +[2026-05-03 07:29:01.519] [info] [pause_resume.cpp:126] [1969] PauseResume cool_down_state 0x0e +[2026-05-03 07:29:01.519] [info] [virtual_sdcard.cpp:166] [1969] VirtualSD cool_down_state 0x0e +[2026-05-03 07:29:01.519] [info] [cavity_fan.cpp:331] [1969] update_timer(cavity_temp_timer, _NEVER +[2026-05-03 07:29:01.519] [info] [cavity_fan.cpp:333] [1969] cool_down_cavity_temp iType:0 fila_box_temp:40 cur_box_temp 28.114838545109535 cool_down_state 0x0e +[2026-05-03 07:29:01.519] [info] [device_status.cpp:832] [1969] M2202 result_code:2401 +[2026-05-03 07:29:01.520] [info] [pause_resume.cpp:490] [1969] resume start, 2401 +[2026-05-03 07:29:01.520] [info] [pause_resume.cpp:417] [1969] abnormal_check is_cover_drop false is_adc_temp_fault false false cool_down_state 0x0e +[2026-05-03 07:29:01.521] [info] [pause_resume.cpp:515] [1969] cmd_RESUME is_goto_waste_box:1 +[2026-05-03 07:29:01.522] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.03545667288285706 +[2026-05-03 07:29:01.523] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:29:01.523] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name extruder +[2026-05-03 07:29:01.523] [info] [gcode.cpp:544] [1969] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 07:29:01.524] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 07:29:01.524] [info] [extruder.cpp:501] [1969] cmd_M104 temp 210 index -1 wait false +[2026-05-03 07:29:01.524] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:210,wait:false +[2026-05-03 07:29:01.525] [info] [heater_bed.cpp:57] [1969] cmd_M140 temp 60 wait false +[2026-05-03 07:29:01.525] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 07:29:01.525] [info] [verify_heater.cpp:67] [1969] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 07:29:01.525] [info] [gcode.cpp:544] [1969] respond_ecode: Heater heater_bed not heating at expected rate, error_code: 101 error_level 3 +[2026-05-03 07:29:01.526] [info] [heaters.cpp:312] [1969] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 07:29:01.526] [info] [heaters.cpp:1066] [1969] __func__:set_temperature,temp:60,wait:false +[2026-05-03 07:29:01.527] [info] [gcode_move.cpp:52] [1969] G180 select 800 +[2026-05-03 07:29:01.529] [info] [gcode.cpp:957] [1969] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=186.0589095144303 +[2026-05-03 07:29:01.529] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = true +[2026-05-03 07:29:01.530] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:29:02.209] [info] [verify_heater.cpp:164] [1969] Heater extruder approaching new target of 210 +[2026-05-03 07:29:02.347] [info] [mmu.cpp:3985] [1969] Execute filament switch process, retry:0 +[2026-05-03 07:29:02.347] [info] [mmu.cpp:3988] [1969] T: 0 +[2026-05-03 07:29:02.348] [info] [mmu.cpp:3705] [1969] get_T_channel channel 0 +[2026-05-03 07:29:02.348] [info] [mmu.cpp:3998] [1969] CMD_canvas_switch_filament channel 0 fila_in[channel] 1 ex_fila_status 0 +[2026-05-03 07:29:02.348] [info] [mmu.cpp:2493] [1969] start extrude channel check. +[2026-05-03 07:29:02.348] [info] [mmu.cpp:2502] [1969] extrude channel check result: -1 ex_fila_status:0 +[2026-05-03 07:29:02.348] [info] [mmu.cpp:4201] [1969] Extruder head filament sensor not triggered +[2026-05-03 07:29:02.348] [info] [mmu.cpp:4243] [1969] Extruder head filament sensor not triggered +[2026-05-03 07:29:02.349] [info] [mmu.cpp:4330] [1969] Execute filament plug in process. channel: 0 +[2026-05-03 07:29:02.349] [info] [mmu.cpp:2859] [1969] exec auto refill filament start, befor_channel 0 ex_fila_status 0 canvas_status 1 +[2026-05-03 07:29:02.349] [info] [mmu.cpp:2911] [1969] exec auto refill filament over, after_channel 0 ex_fila_status 0 canvas_status 1 +[2026-05-03 07:29:02.349] [info] [mmu.cpp:2356] [1969] feed last_pos_1 channel: 0 ch_1: 3295.6563573218364 ch_2: 162.4203401905923 ch_3: 0 ch_4: 0 +[2026-05-03 07:29:09.215] [info] [verify_heater.cpp:140] [1969] Heater extruder within range of 210 +[2026-05-03 07:29:17.649] [info] [filament_switch_sensor.cpp:332] [1969] _button_handler switch_fila_det true +[2026-05-03 07:29:17.649] [info] [mmu.cpp:2068] [1969] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-03 07:29:18.566] [info] [mmu.cpp:2395] [1969] feed last_pos_2 channel: 0 ch_1: 3841.9793197811014 ch_2: 162.4203401905923 ch_3: 0 ch_4: 0 +[2026-05-03 07:29:18.567] [info] [gcode_move.cpp:52] [1969] G180 select 820 +[2026-05-03 07:29:22.901] [info] [mmu.cpp:4396] [1969] Execute rocker arm action +[2026-05-03 07:29:23.902] [info] [mmu.cpp:4407] [1969] Execute rocker arm action complete, dir 1 channel: 0 +[2026-05-03 07:29:23.902] [info] [mmu.cpp:2400] [1969] retry_count 1 last_position 3841.9793197811014 ch_position 3847.8855139698508 +[2026-05-03 07:29:23.902] [info] [mmu.cpp:2406] [1969] feed cur_pos_2 channel: 0 ch_1: 3847.8855139698508 ch_2: 162.4203401905923 ch_3: 0 ch_4: 0 +[2026-05-03 07:29:23.903] [info] [gcode_move.cpp:52] [1969] G180 select 820 +[2026-05-03 07:29:28.244] [info] [mmu.cpp:4396] [1969] Execute rocker arm action +[2026-05-03 07:29:29.245] [info] [mmu.cpp:4407] [1969] Execute rocker arm action complete, dir 1 channel: 0 +[2026-05-03 07:29:29.245] [info] [mmu.cpp:2400] [1969] retry_count 2 last_position 3841.9793197811014 ch_position 3856.7448052529735 +[2026-05-03 07:29:29.245] [info] [mmu.cpp:2406] [1969] feed cur_pos_2 channel: 0 ch_1: 3856.7448052529735 ch_2: 162.4203401905923 ch_3: 0 ch_4: 0 +[2026-05-03 07:29:29.245] [info] [mmu.cpp:2423] [1969] extruder_feed success, channel = 0 +[2026-05-03 07:29:29.245] [info] [mmu.cpp:4340] [1969] Execute filament plug in process complete. channel: 0 +[2026-05-03 07:29:29.246] [info] [mmu.cpp:4752] [1969] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 07:29:29.246] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1210 error_level 3 +[2026-05-03 07:29:29.246] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1211 error_level 3 +[2026-05-03 07:29:29.247] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1220 error_level 3 +[2026-05-03 07:29:29.247] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1231 error_level 3 +[2026-05-03 07:29:29.247] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1232 error_level 3 +[2026-05-03 07:29:29.248] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1241 error_level 3 +[2026-05-03 07:29:29.248] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1242 error_level 3 +[2026-05-03 07:29:29.248] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1243 error_level 3 +[2026-05-03 07:29:29.249] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1251 error_level 3 +[2026-05-03 07:29:29.249] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1252 error_level 3 +[2026-05-03 07:29:29.251] [info] [gcode.cpp:544] [1969] respond_ecode: , error_code: 1265 error_level 3 +[2026-05-03 07:29:29.252] [info] [mmu.cpp:4747] [1969] clear_abnormal_feedback #1 __OVER +[2026-05-03 07:29:29.252] [info] [mmu.cpp:4017] [1969] Execute filament switch process complete, channel 0 +[2026-05-03 07:29:29.252] [info] [pause_resume.cpp:583] [1969] cmd_RESUME is_goto_waste_box:1 +[2026-05-03 07:29:29.253] [info] [gcode_move.cpp:52] [1969] G180 select 812 +[2026-05-03 07:29:42.240] [info] [gcode_move.cpp:52] [1969] G180 select 818 +[2026-05-03 07:29:42.241] [info] [z_compensation.cpp:285] [1969] ZCompensation z_adjust_mm 0.050086871315397075 +[2026-05-03 07:29:46.295] [info] [pause_resume.cpp:589] [1969] __func__:cmd_RESUME #1 fan_speed:M106 S217.000000 +[2026-05-03 07:29:46.296] [info] [pause_resume.cpp:592] [1969] __func__:cmd_RESUME #1 fan1_speed:M106 P2 S0.000000 +[2026-05-03 07:29:46.302] [info] [pause_resume.cpp:619] [1969] cmd_RESUME is_goto_waste_box:1 +[2026-05-03 07:29:46.304] [info] [gcode_move.cpp:772] [1969] cmd_RESTORE_GCODE_STATE : 772___ ok +[2026-05-03 07:29:46.305] [info] [virtual_sdcard.cpp:1061] [1969] do_resume +[2026-05-03 07:29:46.306] [info] [device_status.cpp:832] [1969] M2202 result_code:2402 +[2026-05-03 07:29:46.308] [info] [pause_resume.cpp:648] [1969] resume over, 2402 +[2026-05-03 07:29:46.308] [info] [webhooks.cpp:170] [1969] return total: {"id":46,"result":{}} +[2026-05-03 07:29:46.309] [info] [virtual_sdcard.cpp:1613] [1969] Starting SD card print (position 455677) +[2026-05-03 07:29:46.310] [info] [print_stats.cpp:90] [1969] note_start state printing +[2026-05-03 07:29:46.310] [info] [cavity_fan.cpp:189] [1969] update_timer(fan_timer, _NOW +[2026-05-03 07:29:46.310] [info] [cavity_fan.cpp:190] [1969] value printing is_printing true +[2026-05-03 07:29:46.310] [info] [idle_timeout.cpp:138] [1969] handle_print_state print_state:printing +[2026-05-03 07:29:47.533] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:29:59.986] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:8 +[2026-05-03 07:29:59.987] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:29:59.987] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:30:02.958] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:30:26.929] [info] [clocksync.cpp:212] [2026] mcu 'toolhead': Ignoring clock sample: sent_time=1590.1717292160001,time_avg=1560.629213242621,freq=119998001.95586997,diff=86385.65090942383(0.0007198804242451985),stddev=3011.46820943778 +[2026-05-03 07:30:27.963] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:1565.77800000038,last_temp:59.77473330479569,temp:59.77473330479569,target_temp:60,smoothed_temp:59.76417898798136 +[2026-05-03 07:30:28.628] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:1566.4415469120645,last_temp:208.7324558022343,temp:208.7324558022343,target_temp:210,smoothed_temp:209.40555910939474 +[2026-05-03 07:30:45.665] [error] [tmc_uart.cpp:295] [1969] _decode_read error #0 +[2026-05-03 07:30:49.064] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:9 +[2026-05-03 07:30:49.065] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:30:49.065] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:30:52.270] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:31:38.149] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:10 +[2026-05-03 07:31:38.150] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:31:38.150] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:31:41.464] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:32:28.463] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:1686.27800000038,last_temp:60.09407647676227,temp:60.09407647676227,target_temp:60,smoothed_temp:60.094456035706294 +[2026-05-03 07:32:28.629] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:1686.44354791419,last_temp:211.71717456413887,temp:211.71717456413887,target_temp:210,smoothed_temp:211.77860883070673 +[2026-05-03 07:32:28.698] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:11 +[2026-05-03 07:32:28.699] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:32:28.699] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:32:31.972] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:33:17.938] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:12 +[2026-05-03 07:33:17.939] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:33:17.939] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:33:21.401] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:34:08.801] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:13 +[2026-05-03 07:34:08.802] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:34:08.802] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:34:11.861] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:34:28.630] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:1806.4455701233715,last_temp:211.61281420506714,temp:211.61281420506714,target_temp:210,smoothed_temp:210.78749627642958 +[2026-05-03 07:34:28.962] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:1806.77800000038,last_temp:60.00033379277755,temp:60.00033379277755,target_temp:60,smoothed_temp:60.02179639173113 +[2026-05-03 07:34:59.106] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:14 +[2026-05-03 07:34:59.106] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:34:59.107] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:35:02.308] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:35:48.915] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:15 +[2026-05-03 07:35:48.915] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:35:48.916] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:35:52.062] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:36:28.632] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:1926.4476570532058,last_temp:208.1733472724266,temp:208.1733472724266,target_temp:210,smoothed_temp:208.455325919725 +[2026-05-03 07:36:29.462] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:1927.27800000038,last_temp:60.06629886918063,temp:60.06629886918063,target_temp:60,smoothed_temp:60.05826351065343 +[2026-05-03 07:36:38.420] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:16 +[2026-05-03 07:36:38.421] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:36:38.421] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:36:41.753] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:37:13.201] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:37:32.855] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:17 +[2026-05-03 07:37:32.856] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:37:32.856] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:37:36.263] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:38:28.634] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:2046.449745034354,last_temp:210.69346274216582,temp:210.69346274216582,target_temp:210,smoothed_temp:211.20643955459732 +[2026-05-03 07:38:29.025] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:18 +[2026-05-03 07:38:29.026] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:38:29.026] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:38:29.962] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:2047.77800000038,last_temp:60.05588270236518,temp:60.05588270236518,target_temp:60,smoothed_temp:60.04541617362963 +[2026-05-03 07:38:32.141] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:39:06.610] [info] [clocksync.cpp:212] [2026] mcu 'toolhead': Ignoring clock sample: sent_time=2109.854003714,time_avg=2080.243908736275,freq=119997933.59179956,diff=102237.57528686523(0.0008519797940572103),stddev=8051.964887321689 +[2026-05-03 07:39:09.562] [info] [clocksync.cpp:212] [2018] mcu 'mcu': Ignoring clock sample: sent_time=2112.805904132,time_avg=2083.2030612395683,freq=23999998.045616284,diff=34623.50407409668(0.0014426460030873616),stddev=826.6174211675884 +[2026-05-03 07:39:09.564] [info] [clocksync.cpp:212] [2026] mcu 'toolhead': Ignoring clock sample: sent_time=2112.806959673,time_avg=2082.2824012535157,freq=119997929.56418718,diff=171897.90533447266(0.0014324825444539389),stddev=7801.28305295021 +[2026-05-03 07:39:22.392] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:19 +[2026-05-03 07:39:22.393] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:39:22.393] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:39:22.429] [info] [clocksync.cpp:199] [2018] mcu 'mcu': New minimum RTT: sent_time=2125.673213888,half_rtt=6.437499996536644e-05,freq=24000001.444575544 +[2026-05-03 07:39:26.874] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:40:17.602] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:20 +[2026-05-03 07:40:17.603] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:40:17.603] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:40:20.733] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:40:28.636] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:2166.451848331152,last_temp:212.20673340762647,temp:212.20673340762647,target_temp:210,smoothed_temp:211.6263363152103 +[2026-05-03 07:40:30.462] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:2168.27800000038,last_temp:59.95867646313758,temp:59.95867646313758,target_temp:60,smoothed_temp:59.965132289289315 +[2026-05-03 07:41:11.878] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:21 +[2026-05-03 07:41:11.879] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:41:11.879] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:41:14.794] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:41:16.740] [error] [tmc_uart.cpp:295] [1969] _decode_read error #0 +[2026-05-03 07:42:16.505] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:22 +[2026-05-03 07:42:16.506] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:42:16.506] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:42:19.903] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:42:20.330] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:42:28.638] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:2286.453981172824,last_temp:208.87584745883618,temp:208.87584745883618,target_temp:210,smoothed_temp:208.7909843250609 +[2026-05-03 07:42:30.962] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:2288.77800000038,last_temp:59.98297612198479,temp:59.98297612198479,target_temp:60,smoothed_temp:60.022026886151835 +[2026-05-03 07:42:44.985] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:43:08.215] [info] [clocksync.cpp:212] [2018] mcu 'mcu': Ignoring clock sample: sent_time=2351.459967412,time_avg=2321.8623997367476,freq=23999998.937638216,diff=13215.228019714355(0.0005506345008214315),stddev=515.9636788495181 +[2026-05-03 07:43:15.795] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:23 +[2026-05-03 07:43:15.796] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:43:15.796] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:43:19.105] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:44:15.016] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:24 +[2026-05-03 07:44:15.017] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:44:15.017] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:44:18.206] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:44:28.641] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:2406.4561395950354,last_temp:209.0417453336799,temp:209.0417453336799,target_temp:210,smoothed_temp:209.83865617269572 +[2026-05-03 07:44:31.462] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:2409.27800000038,last_temp:60.09407647676227,temp:60.09407647676227,target_temp:60,smoothed_temp:60.04958085873241 +[2026-05-03 07:45:00.320] [error] [tmc_uart.cpp:295] [1969] _decode_read error #0 +[2026-05-03 07:45:04.744] [info] [clocksync.cpp:212] [2018] mcu 'mcu': Ignoring clock sample: sent_time=2467.988967468,time_avg=2438.3549304243525,freq=24000001.621263653,diff=14456.46019744873(0.0006023525082270305),stddev=958.8503226326981 +[2026-05-03 07:45:12.682] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:25 +[2026-05-03 07:45:12.683] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:45:12.683] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:45:16.276] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:46:13.580] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:26 +[2026-05-03 07:46:13.581] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:46:13.581] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:46:16.911] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:46:28.642] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:2526.458309527778,last_temp:212.078108267505,temp:212.078108267505,target_temp:210,smoothed_temp:211.7728521795165 +[2026-05-03 07:46:31.962] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:2529.77800000038,last_temp:59.96561909465197,temp:59.96561909465197,target_temp:60,smoothed_temp:59.98703506380097 +[2026-05-03 07:47:06.383] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:27 +[2026-05-03 07:47:06.383] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:47:06.383] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:47:09.870] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:47:58.776] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:28 +[2026-05-03 07:47:58.777] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:47:58.777] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:48:02.655] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:48:28.644] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:2646.460490781048,last_temp:209.99100305591043,temp:209.99100305591043,target_temp:210,smoothed_temp:209.5500137474218 +[2026-05-03 07:48:31.804] [info] [clocksync.cpp:212] [2026] mcu 'toolhead': Ignoring clock sample: sent_time=2675.047755358,time_avg=2645.490087185415,freq=119997806.59435515,diff=119346.09167480469(0.0009945507639567057),stddev=4766.46175387648 +[2026-05-03 07:48:32.461] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:2650.27800000038,last_temp:59.917022812827156,temp:59.917022812827156,target_temp:60,smoothed_temp:59.93218493778018 +[2026-05-03 07:48:46.534] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:29 +[2026-05-03 07:48:46.535] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:48:46.535] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:48:49.713] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:49:14.813] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:49:27.823] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:49:32.708] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:30 +[2026-05-03 07:49:32.709] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:49:32.709] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:49:35.793] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:50:18.125] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:31 +[2026-05-03 07:50:18.126] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:50:18.126] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:50:21.338] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:50:22.924] [error] [tmc_uart.cpp:295] [1969] _decode_read error #0 +[2026-05-03 07:50:28.646] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:2766.4626791993974,last_temp:208.97532866952577,temp:208.97532866952577,target_temp:210,smoothed_temp:209.73088783268904 +[2026-05-03 07:50:32.961] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:2770.77800000038,last_temp:59.95520518572016,temp:59.95520518572016,target_temp:60,smoothed_temp:59.96070911950296 +[2026-05-03 07:51:03.091] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:32 +[2026-05-03 07:51:03.092] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:51:03.092] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:51:06.013] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:51:48.372] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:33 +[2026-05-03 07:51:48.373] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:51:48.373] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:51:51.821] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:52:28.647] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:2886.464899167315,last_temp:212.17162498997385,temp:212.17162498997385,target_temp:210,smoothed_temp:211.93880548594095 +[2026-05-03 07:52:33.460] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:2891.27800000038,last_temp:60.00727704201341,temp:60.00727704201341,target_temp:60,smoothed_temp:60.00163301401404 +[2026-05-03 07:52:35.185] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:34 +[2026-05-03 07:52:35.187] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:52:35.187] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:52:38.821] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:52:44.080] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:53:20.513] [info] [clocksync.cpp:212] [2026] mcu 'toolhead': Ignoring clock sample: sent_time=2963.759069621,time_avg=2934.214058690985,freq=119997789.41540796,diff=80638.4926147461(0.0006719874384562175),stddev=3093.620057274902 +[2026-05-03 07:53:22.803] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:35 +[2026-05-03 07:53:22.804] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:53:22.804] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:53:25.852] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:53:29.371] [info] [clocksync.cpp:212] [2026] mcu 'toolhead': Ignoring clock sample: sent_time=2972.616633792,time_avg=2942.325520661825,freq=119997774.8021775,diff=62350.589111328125(0.000519588242594401),stddev=2852.88512649264 +[2026-05-03 07:54:06.786] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:54:15.155] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:36 +[2026-05-03 07:54:15.155] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:54:15.156] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:54:18.430] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:54:28.649] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:3006.4671245276986,last_temp:209.99100305591043,temp:209.99100305591043,target_temp:210,smoothed_temp:209.42119845821227 +[2026-05-03 07:54:33.960] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:3011.77800000038,last_temp:59.88231421477593,temp:59.88231421477593,target_temp:60,smoothed_temp:59.9222761225127 +[2026-05-03 07:55:09.519] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:37 +[2026-05-03 07:55:09.520] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:55:09.520] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:55:12.298] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:55:36.954] [error] [tmc_uart.cpp:295] [1969] _decode_read error #0 +[2026-05-03 07:56:02.271] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:38 +[2026-05-03 07:56:02.272] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:56:02.272] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:56:02.307] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:56:05.728] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:56:12.012] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:56:28.651] [info] [heaters.cpp:405] [2026] __func__:temperature_callback,heater_name:extruder,read_time:3126.4693692985056,last_temp:209.03067055384747,temp:209.03067055384747,target_temp:210,smoothed_temp:209.68779731179555 +[2026-05-03 07:56:34.459] [info] [heaters.cpp:405] [2018] __func__:temperature_callback,heater_name:heater_bed,read_time:3132.27800000038,last_temp:60.05588270236518,temp:60.05588270236518,target_temp:60,smoothed_temp:60.04625925834745 +[2026-05-03 07:56:56.172] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:39 +[2026-05-03 07:56:56.173] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:56:56.173] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:56:58.952] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:57:40.547] [error] [tmc_uart.cpp:319] [1969] _decode_read error #1 +[2026-05-03 07:57:49.400] [info] [print_stats.cpp:157] [1969] cmd_M73 current_layer:40 +[2026-05-03 07:57:49.401] [info] [gcode.cpp:1051] [1969] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 07:57:49.401] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = false +[2026-05-03 07:57:50.265] [info] [device_status.cpp:832] [1969] M2202 result_code:2501 +[2026-05-03 07:57:50.266] [info] [pause_resume.cpp:302] [1969] cmd_PAUSE, 2501 +[2026-05-03 07:57:50.266] [info] [pause_resume.cpp:305] [1969] cmd_PAUSE print_det_state 0 +[2026-05-03 07:57:50.266] [info] [pause_resume.cpp:275] [1969] send_pause_command +[2026-05-03 07:57:50.266] [info] [virtual_sdcard.cpp:1048] [1969] do_pause +[2026-05-03 07:57:50.267] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:57:50.269] [info] [pause_resume.cpp:246] [1969] __func__:save_state #1 state_name:PAUSE_STATE_1 fan_speed:0.8705882352941177 box_fan_speed:0.1 0 +[2026-05-03 07:57:50.364] [info] [virtual_sdcard.cpp:1772] [1969] Exiting SD card print (position 2552691) +[2026-05-03 07:57:50.365] [info] [print_stats.cpp:109] [1969] note_pause state paused +[2026-05-03 07:57:50.365] [info] [cavity_fan.cpp:220] [1969] handle_print_state value paused is_printing false +[2026-05-03 07:57:50.365] [info] [idle_timeout.cpp:138] [1969] handle_print_state print_state:paused +[2026-05-03 07:57:53.342] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:57:53.343] [info] [pause_resume.cpp:246] [1969] __func__:save_state #1 state_name:PAUSE_STATE_2 fan_speed:0.8705882352941177 box_fan_speed:0.1 0 +[2026-05-03 07:57:53.343] [info] [pause_resume.cpp:327] [1969] cmd_PAUSE is_goto_waste_box:1 +[2026-05-03 07:57:53.344] [info] [gcode_move.cpp:52] [1969] G180 select 800 +[2026-05-03 07:57:53.345] [info] [gcode.cpp:957] [1969] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=209.21594233565142 +[2026-05-03 07:57:53.345] [info] [gcode.cpp:1053] [1969] cmd_SET_CONDITION is_ingore = true +[2026-05-03 07:57:53.345] [info] [gcode.cpp:1074] [1969] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 07:57:54.166] [info] [gcode_move.cpp:729] [1969] cmd_SAVE_GCODE_STATE : 729___ ok +[2026-05-03 07:57:54.167] [info] [pause_resume.cpp:246] [1969] __func__:save_state #1 state_name:PAUSE_STATE_3 fan_speed:0 box_fan_speed:0.1 0 +[2026-05-03 07:57:54.168] [info] [gcode_move.cpp:52] [1969] G180 select 0 +[2026-05-03 07:57:54.168] [info] [virtual_sdcard.cpp:1549] [1969] cmd_M25 +[2026-05-03 07:57:54.168] [info] [virtual_sdcard.cpp:1048] [1969] do_pause +[2026-05-03 07:57:54.168] [info] [device_status.cpp:832] [1969] M2202 result_code:2502 +[2026-05-03 07:57:54.169] [info] [device_status.cpp:989] [1969] Stop AI spaghetti detection +[2026-05-03 07:57:54.169] [info] [uds_aicamera_client.cpp:589] [1969] stop_ai_spaghetti_detection called +[2026-05-03 07:57:54.169] [info] [uds_aicamera_client.cpp:350] [1969] Sending UDS request: {"id":9,"method":"ai_detection","params":{"operate":"wire_pause"}} +[2026-05-03 07:57:54.172] [info] [uds_aicamera_client.cpp:41] [2031] Received UDS message: {"id":9,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:57:54.172] [info] [uds_aicamera_client.cpp:194] [2031] Received UDS message: {"id":9,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:57:54.173] [error] [uds_aicamera_client.cpp:196] [2031] Parsing UDS message without 'result': {"id":9,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 07:57:54.173] [info] [pause_resume.cpp:349] [1969] cmd_PAUSE, 2502 +[2026-05-03 07:57:54.173] [info] [webhooks.cpp:170] [1969] return total: {"id":47,"result":{}} +[2026-05-03 07:58:04.058] [warning] [por.cpp:211] [1969] trig_shutdonw! +[2026-05-03 07:58:04.060] [info] [serialhdl.cpp:502] [2018] mcu 'mcu': got handle_output name: #output message: command_shutdown_pins_set: shutdown shutdown_pins +[2026-05-03 07:58:04.060] [info] [serialhdl.cpp:502] [2018] mcu 'mcu': got handle_output name: #output message: analog_in_shutdown oid 27 ev1 0 ev2 0 st 9 sc 8 +[2026-05-03 07:58:04.061] [info] [serialhdl.cpp:502] [2018] mcu 'mcu': got handle_output name: #output message: analog_in_shutdown oid 34 ev1 0 ev2 0 st 9 sc 8 +[2026-05-03 07:58:04.090] [warning] [serialhdl.cpp:553] [2018] response->len:11,params['clock']:15657225,params['static_string_id']:19 mcu mcu 'mcu': shutdown! +[2026-05-03 07:58:04.091] [error] [mcu.cpp:1488] [2018] mcu mcu clock32 15657225 clock64 77325068553 shutdown id 19 msg shutdown_pins +[2026-05-03 07:58:04.092] [info] [virtual_sdcard.cpp:356] [1969] start saving supplement info. +[2026-05-03 07:58:04.094] [info] [config_manager.cpp:338] [1969] save supplement info success +[2026-05-03 07:58:04.096] [info] [config_manager.cpp:474] [1969] save persistent supplement info success +[2026-05-03 07:58:04.096] [info] [virtual_sdcard.cpp:359] [1969] start saving print process data. +[2026-05-03 07:58:04.113] [info] [virtual_sdcard.cpp:404] [1969] handle_power_outage Save new data during actual printing. +[2026-05-03 07:58:04.114] [info] [virtual_sdcard.cpp:423] [1969] start saving task info. +[2026-05-03 07:58:04.114] [info] [device_ui_message_handle.cpp:747] [1969] Reporting history task: {"id":0,"method":"report_history_task","result":{"begin_time":1777763143,"end_time":1777766284,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":9}} +[2026-05-03 07:58:04.167] [info] [record_manager.cpp:420] [1969] Adding history task to record: id 9052df81-606e-47e9-ab30-68836972683f name ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode status 9 +[2026-05-03 07:58:04.167] [info] [sql_database.cpp:97] [1969] Insert SQL: INSERT INTO task_record (task_id, task_name, begin_time, end_time, task_status, time_lapse_video_status, time_lapse_video_url, time_lapse_video_size, time_lapse_video_duration, upload_flag, file_create_time) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 07:58:04.229] [info] [virtual_sdcard.cpp:599] [1969] not exist power_outage_file_name +[2026-05-03 07:58:04.235] [info] [virtual_sdcard.cpp:625] [1969] JSON data has been written to power_outage.json +[2026-05-03 07:58:04.236] [warning] [por.cpp:225] [1969] por:power_off handle done +[2026-05-03 08:02:01.668] [info] [logger.cpp:80] [1932] elegoo log init finish! +[2026-05-03 08:02:01.742] [info] [main.cpp:209] [1932] inputtty:./config/printer,gcode_fd:4 +[2026-05-03 08:02:01.923] [info] [main.cpp:226] [1932] Starting Elegoo... +[2026-05-03 08:02:01.923] [info] [main.cpp:228] [1932] start_args.size:17,sizeof(long_options):9 +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[img_version]:00.00.00.00 +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[gui_version]:01.01.11.03 +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[elegoo_version]:12.26.19.32 +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[camera_version]:00.00.00.00 +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[canvas_version]:00.00.00.00 +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[ota_version]:01.03.01.89 +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[bed_sensor_version]:00.00.00.00 +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[start_reason]:startup +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[apiserver]:/tmp/elegoo_uds +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[toolhead_gd32_version]:00.00.00.00 +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[autosave_file]:/opt/usr/cfg/autosave.cfg +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[gcode_fd]:4 +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[config_file]:/opt/inst/printer_dsp.cfg +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[cpu_info]:2 core ARMv7 Processor rev 5 (v7l) +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[mcu_gd32_version]:00.00.00.00 +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[machine_model]:Centauri Carbon 2 +[2026-05-03 08:02:01.923] [info] [main.cpp:231] [1932] start_args[os_version]:01.02.12.01 +[2026-05-03 08:02:01.923] [info] [main.cpp:236] [1932] long_options[debuginput]:i +[2026-05-03 08:02:01.923] [info] [main.cpp:236] [1932] long_options[input-tty]:I +[2026-05-03 08:02:01.923] [info] [main.cpp:236] [1932] long_options[api-server]:a +[2026-05-03 08:02:01.923] [info] [main.cpp:236] [1932] long_options[logfile]:l +[2026-05-03 08:02:01.923] [info] [main.cpp:236] [1932] long_options[verbose]:v +[2026-05-03 08:02:01.923] [info] [main.cpp:236] [1932] long_options[debugoutput]:o +[2026-05-03 08:02:01.924] [info] [main.cpp:236] [1932] long_options[dictionary]:d +[2026-05-03 08:02:01.924] [info] [main.cpp:236] [1932] long_options[import-test]:t +[2026-05-03 08:02:01.924] [info] [printer.cpp:50] [1932] create Printer success! +[2026-05-03 08:02:01.924] [info] [printer.cpp:365] [1932] connect begin! +[2026-05-03 08:02:01.924] [info] [printer.cpp:284] [1932] read_config begin! +[2026-05-03 08:02:01.962] [info] [webhooks.cpp:595] [1932] create WebHooks success! +[2026-05-03 08:02:01.962] [info] [webhooks.cpp:384] [1932] create ServerSocket success! /tmp/elegoo_uds +[2026-05-03 08:02:01.963] [info] [webhooks.cpp:443] [1932] create ServerSocket success! +[2026-05-03 08:02:02.290] [info] [config_manager.cpp:162] [1932] begin read sn info +[2026-05-03 08:02:02.291] [info] [config_manager.cpp:196] [1932] read product auth success +[2026-05-03 08:02:02.292] [info] [config_manager.cpp:144] [1932] machine: {"machine":{"model":"Centauri Carbon 2"},"versions":[{"os_version":"01.02.12.01"},{"mcu_gd32_version":"00.00.00.00"},{"toolhead_gd32_version":"00.00.00.00"},{"bed_sensor_version":"00.00.00.00"},{"canvas_version":"00.00.00.00"},{"camera_version":"00.00.00.00"},{"elegoo_version":"12.26.19.32"},{"gui_version":"01.01.11.03"},{"ota_version":"01.03.01.89"},{"img_version":"00.00.00.00"}]} +[2026-05-03 08:02:02.333] [info] [config_manager.cpp:150] [1932] parse machine model from sn: Centauri Carbon 2 +[2026-05-03 08:02:02.333] [info] [config_manager.cpp:200] [1932] begin read supplement info +[2026-05-03 08:02:02.417] [info] [config_manager.cpp:283] [1932] token info: token: miM2yt, token_switch_enabled: true, is_lan_mode: false, power_outage_resume_enabled: true, region: 1 +[2026-05-03 08:02:02.420] [info] [config_manager.cpp:441] [1932] load persistent supplement info success +[2026-05-03 08:02:02.517] [info] [device_status.cpp:132] [1932] Create component manager for Centauri Carbon 2 +[2026-05-03 08:02:02.738] [info] [sql_database.cpp:164] [1932] Delete SQL: DELETE FROM file_details WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_details GROUP BY filename HAVING MAX(create_time)); +[2026-05-03 08:02:02.740] [info] [sql_database.cpp:164] [1932] Delete SQL: DELETE FROM file_thumbnail WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_thumbnail GROUP BY filename); +[2026-05-03 08:02:02.744] [info] [record_manager.cpp:302] [1932] Loaded 1 tasks from the database. +[2026-05-03 08:02:02.744] [info] [record_manager.cpp:307] [1932] end task info id 9052df81-606e-47e9-ab30-68836972683f name ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode status 9. +[2026-05-03 08:02:02.744] [info] [record_manager.cpp:311] [1932] PowerOff task saved: id 9052df81-606e-47e9-ab30-68836972683f name ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 08:02:02.745] [info] [record_manager.cpp:318] [1932] Loaded 8 files from the database. +[2026-05-03 08:02:02.747] [info] [record_manager.cpp:323] [1932] Loaded 8 thumbnails from the database. +[2026-05-03 08:02:02.774] [info] [record_manager.cpp:328] [1932] Loaded 0 delete file records from the database. +[2026-05-03 08:02:02.848] [info] [sql_database.cpp:404] [1932] Loaded exception message: id 1, code 801 +[2026-05-03 08:02:02.848] [info] [sql_database.cpp:404] [1932] Loaded exception message: id 2, code 801 +[2026-05-03 08:02:02.848] [info] [sql_database.cpp:404] [1932] Loaded exception message: id 3, code 1263 +[2026-05-03 08:02:02.848] [info] [sql_database.cpp:404] [1932] Loaded exception message: id 4, code 1263 +[2026-05-03 08:02:02.848] [info] [record_manager.cpp:333] [1932] Loaded 4 exception messages from the database. +[2026-05-03 08:02:02.851] [info] [record_manager.cpp:820] [1932] File exists: /opt/usr/gcode/local/ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-03 08:02:02.852] [info] [record_manager.cpp:820] [1932] File exists: /opt/usr/gcode/local/ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-03 08:02:02.852] [info] [record_manager.cpp:820] [1932] File exists: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 08:02:02.853] [info] [record_manager.cpp:820] [1932] File exists: /opt/usr/gcode/local/ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-03 08:02:02.854] [info] [record_manager.cpp:820] [1932] File exists: /opt/usr/gcode/local/ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-03 08:02:02.855] [info] [record_manager.cpp:820] [1932] File exists: /opt/usr/gcode/local/ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-03 08:02:02.855] [info] [record_manager.cpp:820] [1932] File exists: /opt/usr/gcode/local/ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-03 08:02:02.856] [info] [record_manager.cpp:820] [1932] File exists: /opt/usr/gcode/local/ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-03 08:02:02.856] [info] [record_manager.cpp:365] [1932] RecordManager initialized successfully. +[2026-05-03 08:02:02.909] [info] [pins.cpp:112] [1932] create PrinterPins success! +[2026-05-03 08:02:02.961] [info] [msgproto.cpp:606] [1932] create MessageParser success! +[2026-05-03 08:02:02.962] [info] [mcu.cpp:1963] [1932] restart_via_remoterpc +[2026-05-03 08:02:02.962] [error] [serialhdl.cpp:309] [1932] SerialReader::disconnect() +[2026-05-03 08:02:02.962] [info] [dsp_helper.h:31] [1932] remoterpc_ctrl 0 +[2026-05-03 08:02:02.963] [info] [webhooks.cpp:56] [1932] webhooks client 18392972: New connection +[2026-05-03 08:02:02.970] [info] [webhooks.cpp:1213] [1932] handle_query is_subscribe true : {"canvas_dev":["canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[2026-05-03 08:02:02.971] [info] [webhooks.cpp:1213] [1932] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[2026-05-03 08:02:02.972] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[2026-05-03 08:02:02.972] [info] [device_ui_message_handle.cpp:485] [1932] Total tasks: 0 +[2026-05-03 08:02:02.972] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"history_task_list":null,"offset":0,"script":"get_history_task","total":0} +[2026-05-03 08:02:02.973] [info] [webhooks.cpp:170] [1932] return total: {"id":6,"method":"sync_info","result":{"history_task_list":null,"offset":0,"script":"get_history_task","total":0}} +[2026-05-03 08:02:02.975] [warning] [webhooks.cpp:148] [1932] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 08:02:02.976] [info] [webhooks.cpp:170] [1932] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":8} +[2026-05-03 08:02:02.976] [info] [webhooks.cpp:170] [1932] return total: {"id":10,"result":{}} +[2026-05-03 08:02:02.978] [warning] [webhooks.cpp:148] [1932] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 08:02:02.978] [info] [webhooks.cpp:170] [1932] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":12} +[2026-05-03 08:02:02.979] [info] [device_ui_message_handle.cpp:237] [1932] Handling bind function request {"script":"get_device_info"} +[2026-05-03 08:02:02.980] [info] [webhooks.cpp:756] [1932] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-05-03 08:02:02.980] [info] [webhooks.cpp:170] [1932] return total: {"id":14,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-05-03 08:02:02.981] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"region_code":1,"script":"set_region"} +[2026-05-03 08:02:02.981] [info] [device_ui_message_handle.cpp:111] [1932] Handling set region request 1 +[2026-05-03 08:02:02.981] [info] [device_ui_message_handle.cpp:114] [1932] Region is the same as current region: 1 +[2026-05-03 08:02:02.981] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"set_region"} +[2026-05-03 08:02:02.982] [info] [webhooks.cpp:170] [1932] return total: {"id":16,"method":"sync_info","result":{"script":"set_region"}} +[2026-05-03 08:02:02.988] [info] [webhooks.cpp:170] [1932] return total: {"id":4,"result":{"eventtime":24.733202053,"status":null}} +[2026-05-03 08:02:02.990] [warning] [webhooks.cpp:148] [1932] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 08:02:02.990] [info] [webhooks.cpp:170] [1932] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":7} +[2026-05-03 08:02:02.991] [info] [device_ui_message_handle.cpp:303] [1932] Get Network access cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[2026-05-03 08:02:02.991] [info] [webhooks.cpp:744] [1932] return handle_get_network_access_cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[2026-05-03 08:02:02.991] [info] [webhooks.cpp:170] [1932] return total: {"id":11,"method":"get_network_access_cfg","result":{"object":{"lan_status":false,"token":"miM2yt","token_status":true}}} +[2026-05-03 08:02:02.992] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"script":"get_device_status"} +[2026-05-03 08:02:02.992] [info] [device_ui_message_handle.cpp:125] [1932] Handling get device status request +[2026-05-03 08:02:02.994] [info] [device_ui_message_handle.cpp:136] [1932] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-03 08:02:02.994] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-03 08:02:02.994] [info] [webhooks.cpp:170] [1932] return total: {"id":15,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[2026-05-03 08:02:02.996] [info] [webhooks.cpp:170] [1932] return total: {"id":5,"result":{"eventtime":24.733202053,"status":null}} +[2026-05-03 08:02:03.473] [warning] [webhooks.cpp:148] [1932] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 08:02:03.474] [info] [webhooks.cpp:170] [1932] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":9} +[2026-05-03 08:02:03.474] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"script":"set_status","status":1,"sub_status":0} +[2026-05-03 08:02:03.475] [info] [device_ui_message_handle.cpp:535] [1932] Setting status: 1, sub_status: 0 +[2026-05-03 08:02:03.475] [info] [device_status.cpp:1023] [1932] Set UI ready: true +[2026-05-03 08:02:03.475] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"set_status"} +[2026-05-03 08:02:03.475] [info] [webhooks.cpp:170] [1932] return total: {"id":17,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 08:02:03.963] [info] [dsp_helper.h:31] [1932] remoterpc_ctrl 1 +[2026-05-03 08:02:04.097] [warning] [webhooks.cpp:148] [1932] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 08:02:04.098] [info] [webhooks.cpp:170] [1932] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":13} +[2026-05-03 08:02:05.099] [info] [msgproto.cpp:606] [1932] create MessageParser success! +[2026-05-03 08:02:05.100] [info] [mcu.cpp:1049] [1932] MCU 'bed_sensor' restart power +[2026-05-03 08:02:05.510] [info] [mcu.cpp:1072] [1932] bootloader mode, try jump to app! +[2026-05-03 08:02:05.540] [info] [msgproto.cpp:606] [1932] create MessageParser success! +[2026-05-03 08:02:05.541] [info] [mcu.cpp:1049] [1932] MCU 'toolhead' restart power +[2026-05-03 08:02:05.951] [info] [mcu.cpp:1072] [1932] bootloader mode, try jump to app! +[2026-05-03 08:02:06.010] [info] [bed_mesh.cpp:1466] [1932] zero_ref_pos size 0 +[2026-05-03 08:02:06.047] [info] [bed_mesh.cpp:2722] [1932] ProfileManager profile->get_name bed_mesh +[2026-05-03 08:02:06.047] [info] [bed_mesh.cpp:2722] [1932] ProfileManager profile->get_name bed_mesh ADAPTIVE +[2026-05-03 08:02:06.048] [info] [bed_mesh.cpp:2722] [1932] ProfileManager profile->get_name bed_mesh default +[2026-05-03 08:02:06.053] [info] [gcode_move.cpp:60] [1932] GCodeMove init! +[2026-05-03 08:02:06.095] [info] [gcode_move.cpp:119] [1932] GCodeMove init success!! +[2026-05-03 08:02:06.095] [info] [gcode_move.cpp:274] [1932] set_move_transform transform: force:false +[2026-05-03 08:02:06.155] [info] [print_stats.cpp:26] [1932] PrintStats init! +[2026-05-03 08:02:06.156] [info] [print_stats.cpp:55] [1932] PrintStats init success!! +[2026-05-03 08:02:06.157] [info] [bed_mesh.cpp:463] [1932] update_status bed_mesh_exist:0x0100 +[2026-05-03 08:02:06.157] [info] [print_stats.cpp:277] [1932] bed_mesh_exist:0x0100 +[2026-05-03 08:02:06.157] [warning] [extras_factory.cpp:318] [1932] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-03 08:02:06.157] [warning] [extras_factory.cpp:318] [1932] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-03 08:02:06.158] [info] [beep_ctrl.cpp:39] [1932] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[2026-05-03 08:02:06.159] [info] [beep_ctrl.cpp:137] [1932] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[2026-05-03 08:02:06.160] [info] [beep_ctrl.cpp:252] [1932] exec_cmd data 0 +[2026-05-03 08:02:06.161] [info] [beep_ctrl.cpp:171] [1932] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[2026-05-03 08:02:06.162] [info] [beep_ctrl.cpp:252] [1932] exec_cmd data 333333 +[2026-05-03 08:02:06.162] [info] [beep_ctrl.cpp:189] [1932] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[2026-05-03 08:02:06.162] [info] [beep_ctrl.cpp:252] [1932] exec_cmd data 166666 +[2026-05-03 08:02:06.162] [info] [beep_ctrl.cpp:207] [1932] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[2026-05-03 08:02:06.162] [info] [beep_ctrl.cpp:252] [1932] exec_cmd data normal +[2026-05-03 08:02:06.165] [info] [query_adc.cpp:36] [1932] QueryADC init success! +[2026-05-03 08:02:06.166] [info] [mmu.cpp:1442] [1932] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[2026-05-03 08:02:06.167] [info] [mmu.cpp:1460] [1932] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[2026-05-03 08:02:06.194] [info] [cavity_fan.cpp:36] [1932] PrinterFanCavity init! +[2026-05-03 08:02:06.195] [info] [cavity_fan.cpp:96] [1932] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[2026-05-03 08:02:06.195] [info] [cavity_fan.cpp:107] [1932] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[2026-05-03 08:02:06.196] [info] [cavity_fan.cpp:115] [1932] temp_drop_det_time 1 5 2 1.5 3 +[2026-05-03 08:02:06.196] [info] [fan.cpp:55] [1932] __func__:Fan #1 str_pin:PD17 +[2026-05-03 08:02:06.197] [info] [cavity_fan.cpp:119] [1932] PrinterFanCavity init success!! +[2026-05-03 08:02:06.198] [info] [stepper_enable.cpp:27] [1932] PrinterStepperEnable init! +[2026-05-03 08:02:06.200] [info] [fan.cpp:55] [1932] __func__:Fan #1 str_pin:PG15 +[2026-05-03 08:02:06.202] [info] [fan.cpp:55] [1932] __func__:Fan #1 str_pin:toolhead:PA8 +[2026-05-03 08:02:06.204] [info] [fan.cpp:55] [1932] __func__:Fan #1 str_pin:PD15 +[2026-05-03 08:02:06.215] [warning] [extras_factory.cpp:318] [1932] create extras: "g180_load_config" failer! +[2026-05-03 08:02:06.217] [info] [heater_bed.cpp:18] [1932] PrinterHeaterBed Init! +[2026-05-03 08:02:06.218] [info] [heaters.cpp:836] [1932] PrinterHeaters init! +[2026-05-03 08:02:06.219] [info] [heaters.cpp:861] [1932] PrinterHeaters init success! +[2026-05-03 08:02:06.260] [info] [heaters.cpp:897] [1932] c->get_name(): thermistor NTC 100K beta 3950 +[2026-05-03 08:02:06.261] [info] [thermistor.cpp:138] [1932] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[2026-05-03 08:02:06.303] [info] [heaters.cpp:897] [1932] c->get_name(): thermistor NTC 100K beta 3950 DSP +[2026-05-03 08:02:06.304] [info] [thermistor.cpp:138] [1932] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[2026-05-03 08:02:06.427] [info] [utilities.cpp:52] [1932] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[2026-05-03 08:02:06.429] [info] [thermistor.cpp:146] [1932] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[2026-05-03 08:02:06.429] [info] [heaters.cpp:897] [1932] c->get_name(): thermistor NTC 100K beta 4300 +[2026-05-03 08:02:06.430] [info] [thermistor.cpp:138] [1932] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[2026-05-03 08:02:06.430] [info] [heaters.cpp:897] [1932] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[2026-05-03 08:02:06.431] [info] [thermistor.cpp:138] [1932] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[2026-05-03 08:02:06.431] [info] [heaters.cpp:897] [1932] c->get_name(): thermistor NTC R25 350 +[2026-05-03 08:02:06.432] [info] [thermistor.cpp:138] [1932] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[2026-05-03 08:02:06.432] [info] [heaters.cpp:905] [1932] PrinterHeaters::load_config success! +[2026-05-03 08:02:06.432] [info] [heaters.cpp:994] [1932] setup_sensor success! +[2026-05-03 08:02:06.433] [info] [adc_temperature.cpp:29] [1932] __func__:PrinterADCtoTemperature name:heater_bed +[2026-05-03 08:02:06.433] [info] [adc_temperature.cpp:35] [1932] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[2026-05-03 08:02:06.433] [info] [adc_temperature.cpp:165] [1932] name:heater_bed +[2026-05-03 08:02:06.434] [info] [error_mcu.cpp:101] [1932] create PrinterMCUError success! +[2026-05-03 08:02:06.435] [info] [heaters.cpp:83] [1932] Heater init! name: heater_bed +[2026-05-03 08:02:06.435] [info] [heaters.cpp:119] [1932] __func__:Heater,heater_pin:PG13 +[2026-05-03 08:02:06.437] [info] [pid_calibrate.cpp:43] [1932] PIDCalibrate init success!! +[2026-05-03 08:02:06.438] [warning] [heaters.cpp:322] [1932] Heater init success!!!! +[2026-05-03 08:02:06.438] [warning] [heaters.cpp:947] [1932] debug name heater_bed, gcode_id B +[2026-05-03 08:02:06.439] [info] [heater_bed.cpp:41] [1932] PrinterHeaterBed Init success! +[2026-05-03 08:02:06.440] [info] [heater_fan.cpp:24] [1932] PrinterHeaterFan init! +[2026-05-03 08:02:06.440] [info] [fan.cpp:55] [1932] __func__:Fan #1 str_pin:toolhead:PB13 +[2026-05-03 08:02:06.441] [info] [heater_fan.cpp:46] [1932] PrinterHeaterFan init success!! +[2026-05-03 08:02:06.444] [info] [idle_timeout.cpp:28] [1932] init IdleTimeout ... +[2026-05-03 08:02:06.446] [info] [idle_timeout.cpp:72] [1932] init IdleTimeout success !!! +[2026-05-03 08:02:06.450] [info] [bulk_sensor.cpp:312] [1932] unpack_fmt:mqtt_strategy_->is_valid(): true +[2026-05-03 08:02:11.840] [info] [device_ui_message_handle.cpp:356] [1998] report_error: {"id":0,"report":{"error_code":2002,"error_level":3,"message":"connect mqtt success"}} +[2026-05-03 08:02:11.840] [info] [timer_manager.cpp:72] [1998] Adding timer task: WanStrategy_sync_device_info, interval: 100 ms, repeat: false +[2026-05-03 08:02:11.841] [info] [device_status.cpp:1445] [1998] post_all_dev_message +[2026-05-03 08:02:11.846] [info] [device_status.cpp:1459] [1998] post_all_dev_message {"canvas_info":{"active_canvas_id":0,"active_tray_id":0,"auto_refill":false,"canvas_list":[{"canvas_id":0,"connected":0,"tray_list":[{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":0},{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":0},{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":0},{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":0}]}]},"device_assistant":{"status":1},"external_device":{"camera":false,"type":"0","u_disk":false},"extruder":{"filament_detect_enable":0,"filament_detected":0,"target":0,"temperature":0},"fans":{"aux_fan":{"speed":0.0},"box_fan":{"speed":0.0},"controller_fan":{"speed":0.0},"fan":{"speed":0.0},"heater_fan":{"speed":0.0}},"foreign_object_detection":{"status":0},"gcode_move":{"extruder":0.0,"speed":0,"speed_mode":4,"x":0.0,"y":0.0,"z":0.0},"heater_bed":{"target":0,"temperature":0},"led":{"status":0},"machine_status":{"exception_status":[],"progress":0,"status":15,"sub_status":0,"sub_status_reason_code":0},"mono_filament_info":{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":0},"print_status":{"bed_mesh_detect":false,"current_layer":0,"enable":false,"filament_detect":false,"filename":"","print_duration":0,"remaining_time_sec":0,"state":"","total_duration":0,"uuid":""},"spaghetti_detection":{"frequency":"medium","handing":"pause","status":0},"tool_head":{"homed_axes":""},"ztemperature_sensor":{"measured_max_temperature":0,"measured_min_temperature":0,"temperature":0}} +[2026-05-03 08:02:11.847] [info] [device_status.cpp:956] [1998] Report exception codes to cloud : {"exception":{"exception_code":{}},"meta_data":{"id":1777766531847}} +[2026-05-03 08:02:11.849] [info] [device_status.cpp:1119] [1998] get sync history tasks +[2026-05-03 08:02:11.849] [info] [device_status.cpp:1129] [1998] Total tasks: 0 +[2026-05-03 08:02:11.849] [warning] [mqtt_connector.cpp:400] [1998] No history tasks to sync. +[2026-05-03 08:02:11.849] [info] [mqtt_connector.cpp:295] [1998] Subscribed to topic: server/service/F01CFFQQFN55YKS/down +[2026-05-03 08:02:11.942] [info] [record_manager.cpp:1311] [1999] Starting sync +[2026-05-03 08:02:11.948] [info] [webhooks.cpp:170] [1932] return total: {"id":32,"result":{"eventtime":33.696161015,"status":{"print_stats":{"filename":"local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode"}}}} +[2026-05-03 08:02:11.954] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_SOFTWARE_VERSION","result":"00.00.00.44"} +[2026-05-03 08:02:11.963] [info] [webhooks.cpp:1213] [1932] handle_query is_subscribe false : {"print_stats":["print_duration_before_power_loss"]} +[2026-05-03 08:02:12.449] [info] [webhooks.cpp:170] [1932] return total: {"id":33,"result":{"eventtime":34.197106682,"status":{"print_stats":{"print_duration_before_power_loss":2352.320316829}}}} +[2026-05-03 08:02:12.905] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=34.665230849,half_rtt=0.0002657710000022462,freq=119996322.84341715 +[2026-05-03 08:02:12.952] [info] [servo.cpp:166] [1932] servo go home! +[2026-05-03 08:02:13.889] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=35.64904085,half_rtt=0.00026002050000073496,freq=119996697.80293258 +[2026-05-03 08:02:14.873] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=36.633156807999995,half_rtt=0.00025885450000373567,freq=119996810.75326696 +[2026-05-03 08:02:15.858] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=37.618126142,half_rtt=0.0002570209999994688,freq=119996903.41049488 +[2026-05-03 08:02:23.935] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1301 error_level 3 +[2026-05-03 08:02:23.937] [info] [device_status.cpp:832] [1932] M2202 result_code:2405 +[2026-05-03 08:02:23.944] [info] [bed_mesh.cpp:463] [1932] update_status bed_mesh_exist:0x0100 +[2026-05-03 08:02:23.945] [info] [print_stats.cpp:277] [1932] bed_mesh_exist:0x0100 +[2026-05-03 08:02:23.946] [info] [bed_mesh.cpp:638] [1932] execute_calirate_from_slicer 1 +[2026-05-03 08:02:23.947] [info] [mcu.cpp:712] [1932] set_digital pin PE12 20.152804708333335 45.709237146 +[2026-05-03 08:02:23.948] [info] [stepper_enable.cpp:95] [1932] stepper_z has been manually enabled +[2026-05-03 08:02:23.948] [info] [virtual_sdcard.cpp:1214] [1932] Step 0: configure GCODE file +[2026-05-03 08:02:23.949] [info] [virtual_sdcard.cpp:1109] [1932] _reset_file +[2026-05-03 08:02:23.950] [info] [virtual_sdcard.cpp:1048] [1932] do_pause +[2026-05-03 08:02:23.950] [info] [cavity_fan.cpp:220] [1932] handle_print_state value standby is_printing false +[2026-05-03 08:02:23.951] [info] [idle_timeout.cpp:138] [1932] handle_print_state print_state:standby +[2026-05-03 08:02:23.951] [info] [virtual_sdcard.cpp:1499] [1932] fname /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 08:02:23.953] [info] [virtual_sdcard.cpp:1520] [1932] VirtualSD File opened: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode, Size:6055579 +[2026-05-03 08:02:23.954] [info] [cavity_fan.cpp:220] [1932] handle_print_state value standby is_printing false +[2026-05-03 08:02:23.955] [info] [idle_timeout.cpp:138] [1932] handle_print_state print_state:standby +[2026-05-03 08:02:23.956] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:40 +[2026-05-03 08:02:23.957] [info] [virtual_sdcard.cpp:1220] [1932] Step 1: heated bed. +[2026-05-03 08:02:23.957] [info] [heater_bed.cpp:57] [1932] cmd_M140 temp 60 wait false +[2026-05-03 08:02:23.958] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 08:02:23.958] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 08:02:23.958] [info] [gcode.cpp:544] [1932] respond_ecode: Heater heater_bed not heating at expected rate, error_code: 101 error_level 3 +[2026-05-03 08:02:23.959] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 08:02:23.960] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:60,wait:false +[2026-05-03 08:02:23.961] [info] [virtual_sdcard.cpp:1226] [1932] Step 2: Extruder heating. (-80), current temp:114.68267419401563 T-80:130 +[2026-05-03 08:02:23.962] [info] [device_status.cpp:832] [1932] M2202 result_code:1045 +[2026-05-03 08:02:23.964] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:02:23.965] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:02:23.965] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:02:23.966] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:02:23.966] [info] [extruder.cpp:501] [1932] cmd_M104 temp 130 index -1 wait true +[2026-05-03 08:02:23.967] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:130,wait:true +[2026-05-03 08:02:23.991] [info] [verify_heater.cpp:164] [1932] Heater extruder approaching new target of 130 +[2026-05-03 08:02:23.991] [info] [verify_heater.cpp:164] [1932] Heater heater_bed approaching new target of 60 +[2026-05-03 08:02:24.114] [error] [tmc.cpp:359] [1932] TMC stepper_z reports GSTAT: 10000000 reset=1(Reset) +[2026-05-03 08:02:25.703] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=47.46336398,half_rtt=0.000255604500001283,freq=119997405.86418967 +[2026-05-03 08:02:28.974] [info] [verify_heater.cpp:140] [1932] Heater extruder within range of 130 +[2026-05-03 08:02:30.975] [info] [device_status.cpp:832] [1932] M2202 result_code:1066 +[2026-05-03 08:02:30.976] [info] [heaters.cpp:1198] [1932] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 130 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 08:02:30.977] [info] [virtual_sdcard.cpp:1241] [1932] Step 3: move Z(+5). +[2026-05-03 08:02:30.978] [info] [force_move.cpp:232] [1932] SET_KINEMATIC_POSITION pos=5, 5, 13 clear=xy +[2026-05-03 08:02:33.977] [info] [verify_heater.cpp:140] [1932] Heater heater_bed within range of 60 +[2026-05-03 08:02:34.352] [info] [virtual_sdcard.cpp:1261] [1932] Step 4: homing. +[2026-05-03 08:02:34.352] [info] [virtual_sdcard.cpp:1263] [1932] Step 5: move to the waste box. +[2026-05-03 08:02:34.353] [info] [homing_override.cpp:238] [1932] need true true false homed false false true +[2026-05-03 08:02:34.353] [info] [device_status.cpp:832] [1932] M2202 result_code:2801 +[2026-05-03 08:02:34.355] [info] [homing_override.cpp:263] [1932] cmd_G28 cur_temp:129.7585894782757,safe_home_temp:140 +[2026-05-03 08:02:34.356] [info] [device_status.cpp:832] [1932] M2202 result_code:1045 +[2026-05-03 08:02:34.358] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:02:34.358] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:02:34.358] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:02:34.358] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:02:34.359] [info] [extruder.cpp:501] [1932] cmd_M104 temp 140 index -1 wait true +[2026-05-03 08:02:34.359] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:140,wait:true +[2026-05-03 08:02:34.562] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=56.322386650999995,half_rtt=0.0002539375000019106,freq=119997568.11342841 +[2026-05-03 08:02:34.977] [info] [verify_heater.cpp:164] [1932] Heater extruder approaching new target of 140 +[2026-05-03 08:02:37.979] [info] [verify_heater.cpp:140] [1932] Heater extruder within range of 140 +[2026-05-03 08:02:43.364] [info] [device_status.cpp:832] [1932] M2202 result_code:1066 +[2026-05-03 08:02:43.366] [info] [heaters.cpp:1198] [1932] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 08:02:43.366] [info] [homing_override.cpp:166] [1932] homing_ready axis z +[2026-05-03 08:02:43.621] [info] [homing_override.cpp:175] [1932] homing_ready #2: endstop name z state false +[2026-05-03 08:02:43.896] [info] [gcode.cpp:559] [1932] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 08:02:44.177] [info] [gcode.cpp:559] [1932] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 08:02:44.179] [info] [gcode_move.cpp:629] [1932] cmd_M114 X:5.000 Y:5.000 Z:23.000 E:0.000 +[2026-05-03 08:02:44.180] [info] [stepper.cpp:573] [1932] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 08:02:44.217] [info] [homing.cpp:152] [1932] kin_spos name stepper_x command_position 390.75 +[2026-05-03 08:02:44.218] [info] [homing.cpp:152] [1932] kin_spos name stepper_y command_position 380.75 +[2026-05-03 08:02:44.218] [info] [homing.cpp:152] [1932] kin_spos name stepper_z command_position 23 +[2026-05-03 08:02:44.322] [info] [mcu.cpp:712] [1932] set_digital pin PF6 40.346607375 66.083697823 +[2026-05-03 08:02:44.323] [info] [mcu.cpp:712] [1932] set_digital pin PE15 40.346607375 66.084668531 +[2026-05-03 08:02:44.555] [error] [tmc.cpp:359] [1932] TMC stepper_x reports GSTAT: 10000000 reset=1(Reset) +[2026-05-03 08:02:44.561] [error] [tmc.cpp:359] [1932] TMC stepper_y reports GSTAT: 10000000 reset=1(Reset) +[2026-05-03 08:02:44.575] [info] [mcu.cpp:390] [1984] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 08:02:44.608] [info] [mcu.cpp:634] [1932] home_wait pin_value:1 next_clock:970334508 +[2026-05-03 08:02:44.609] [info] [homing.cpp:266] [1932] endstop_name x tt 40.43039683333333 trigger_time 40.43039683333333 move_end_print_time 40.68660737499999 +[2026-05-03 08:02:44.609] [info] [homing.cpp:266] [1932] endstop_name x tt 40.43039683333333 trigger_time 40.43039683333333 move_end_print_time 40.68660737499999 +[2026-05-03 08:02:44.609] [info] [homing.cpp:309] [1932] stepper_name stepper_x over_steps -1 halt_pos -332 start_pos 0 trig_pos -331 +[2026-05-03 08:02:44.609] [info] [homing.cpp:309] [1932] stepper_name stepper_y over_steps -1 halt_pos -332 start_pos 0 trig_pos -331 +[2026-05-03 08:02:44.643] [info] [gcode.cpp:544] [1932] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 08:02:44.644] [info] [stepper.cpp:573] [1932] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 08:02:45.250] [info] [gcode_move.cpp:629] [1932] cmd_M114 X:7.988 Y:5.000 Z:23.000 E:0.000 +[2026-05-03 08:02:45.251] [info] [gcode_move.cpp:629] [1932] cmd_M114 X:7.988 Y:5.000 Z:23.000 E:0.000 +[2026-05-03 08:02:45.252] [info] [stepper.cpp:573] [1932] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 08:02:45.281] [info] [homing.cpp:152] [1932] kin_spos name stepper_x command_position 413.98754 +[2026-05-03 08:02:45.281] [info] [homing.cpp:152] [1932] kin_spos name stepper_y command_position -398.01246 +[2026-05-03 08:02:45.282] [info] [homing.cpp:152] [1932] kin_spos name stepper_z command_position 23 +[2026-05-03 08:02:46.388] [info] [clocksync.cpp:199] [1984] mcu 'mcu': New minimum RTT: sent_time=68.149596574,half_rtt=9.427049999999326e-05,freq=24000000.814344984 +[2026-05-03 08:02:49.981] [info] [mcu.cpp:390] [1984] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 08:02:49.996] [warning] [tmc.cpp:887] [1932] Stepper stepper_y phase change (was 3 now -61) +[2026-05-03 08:02:50.005] [info] [mcu.cpp:634] [1932] home_wait pin_value:1 next_clock:1100093303 +[2026-05-03 08:02:50.006] [info] [homing.cpp:266] [1932] endstop_name y tt 45.837013291666665 trigger_time 45.837013291666665 move_end_print_time 46.088911 +[2026-05-03 08:02:50.006] [info] [homing.cpp:266] [1932] endstop_name y tt 45.837013291666665 trigger_time 45.837013291666665 move_end_print_time 46.088911 +[2026-05-03 08:02:50.006] [info] [homing.cpp:309] [1932] stepper_name stepper_y over_steps 0 halt_pos 21718 start_pos 471 trig_pos 21718 +[2026-05-03 08:02:50.006] [info] [homing.cpp:309] [1932] stepper_name stepper_x over_steps 0 halt_pos -20776 start_pos 471 trig_pos -20776 +[2026-05-03 08:02:50.040] [info] [gcode.cpp:544] [1932] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 08:02:50.041] [info] [stepper.cpp:573] [1932] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 08:02:50.557] [info] [gcode_move.cpp:629] [1932] cmd_M114 X:7.988 Y:8.000 Z:23.000 E:0.000 +[2026-05-03 08:02:50.558] [info] [gcode_move.cpp:629] [1932] cmd_M114 X:7.988 Y:8.000 Z:23.000 E:0.000 +[2026-05-03 08:02:50.559] [info] [stepper.cpp:573] [1932] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 08:02:50.590] [info] [homing.cpp:152] [1932] kin_spos name stepper_x command_position 393.75 +[2026-05-03 08:02:50.590] [info] [homing.cpp:152] [1932] kin_spos name stepper_y command_position 377.75 +[2026-05-03 08:02:50.590] [info] [homing.cpp:152] [1932] kin_spos name stepper_z command_position 23 +[2026-05-03 08:02:51.882] [info] [mcu.cpp:390] [1984] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 08:02:51.905] [info] [mcu.cpp:634] [1932] home_wait pin_value:1 next_clock:1145701858 +[2026-05-03 08:02:51.905] [info] [homing.cpp:266] [1932] endstop_name x tt 47.73736975 trigger_time 47.73736975 move_end_print_time 47.989539625 +[2026-05-03 08:02:51.906] [info] [homing.cpp:266] [1932] endstop_name x tt 47.73736975 trigger_time 47.73736975 move_end_print_time 47.989539625 +[2026-05-03 08:02:51.906] [info] [homing.cpp:309] [1932] stepper_name stepper_x over_steps 0 halt_pos -24795 start_pos -19973 trig_pos -24795 +[2026-05-03 08:02:51.906] [info] [homing.cpp:309] [1932] stepper_name stepper_y over_steps 0 halt_pos 16093 start_pos 20915 trig_pos 16093 +[2026-05-03 08:02:51.940] [info] [gcode.cpp:544] [1932] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 08:02:51.941] [info] [stepper.cpp:573] [1932] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 08:02:52.558] [info] [gcode_move.cpp:629] [1932] cmd_M114 X:8.000 Y:8.000 Z:23.000 E:0.000 +[2026-05-03 08:02:52.560] [info] [gcode_move.cpp:629] [1932] cmd_M114 X:8.000 Y:8.000 Z:23.000 E:0.000 +[2026-05-03 08:02:52.560] [info] [stepper.cpp:573] [1932] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 08:02:52.591] [info] [homing.cpp:152] [1932] kin_spos name stepper_x command_position 414 +[2026-05-03 08:02:52.591] [info] [homing.cpp:152] [1932] kin_spos name stepper_y command_position -398 +[2026-05-03 08:02:52.591] [info] [homing.cpp:152] [1932] kin_spos name stepper_z command_position 23 +[2026-05-03 08:02:53.043] [info] [mcu.cpp:390] [1984] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 08:02:53.080] [info] [mcu.cpp:634] [1932] home_wait pin_value:1 next_clock:1173569655 +[2026-05-03 08:02:53.081] [info] [homing.cpp:266] [1932] endstop_name y tt 48.89852795833333 trigger_time 48.89852795833333 move_end_print_time 49.150360375 +[2026-05-03 08:02:53.081] [info] [homing.cpp:266] [1932] endstop_name y tt 48.89852795833333 trigger_time 48.89852795833333 move_end_print_time 49.150360375 +[2026-05-03 08:02:53.081] [info] [homing.cpp:309] [1932] stepper_name stepper_y over_steps 0 halt_pos 17687 start_pos 16896 trig_pos 17687 +[2026-05-03 08:02:53.081] [info] [homing.cpp:309] [1932] stepper_name stepper_x over_steps 0 halt_pos -24783 start_pos -23992 trig_pos -24783 +[2026-05-03 08:02:53.111] [info] [gcode.cpp:544] [1932] respond_ecode: Z-axis homing error, error_code: 304 error_level 3 +[2026-05-03 08:02:53.112] [info] [stepper.cpp:573] [1932] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 08:02:53.114] [info] [gcode_move.cpp:629] [1932] cmd_M114 X:8.000 Y:8.000 Z:23.000 E:0.000 +[2026-05-03 08:02:53.655] [info] [gcode.cpp:559] [1932] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 08:02:53.930] [info] [gcode.cpp:559] [1932] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 08:02:53.932] [info] [device_status.cpp:832] [1932] M2202 result_code:2802 +[2026-05-03 08:02:53.933] [info] [gcode_move.cpp:52] [1932] G180 select 800 +[2026-05-03 08:02:53.934] [info] [gcode.cpp:957] [1932] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=141.920925244693 +[2026-05-03 08:02:53.934] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = true +[2026-05-03 08:02:53.935] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:02:55.375] [info] [virtual_sdcard.cpp:1269] [1932] Step 13: load bed mesh +[2026-05-03 08:02:55.376] [info] [bed_mesh.cpp:2901] [1932] cmd_BED_MESH_PROFILE: from_slicer 0 execute_calirate_from_slicer 1 +[2026-05-03 08:02:55.382] [info] [bed_mesh.cpp:463] [1932] update_status bed_mesh_exist:0x0100 +[2026-05-03 08:02:55.382] [info] [print_stats.cpp:277] [1932] bed_mesh_exist:0x0100 +[2026-05-03 08:02:55.382] [info] [bed_mesh.cpp:2875] [1932] ProfileManager::load_profile ADAPTIVE time 0.006343958000002203 +[2026-05-03 08:02:55.383] [info] [virtual_sdcard.cpp:1287] [1932] Step 6: extruder heating. +[2026-05-03 08:02:55.384] [info] [device_status.cpp:832] [1932] M2202 result_code:1045 +[2026-05-03 08:02:55.385] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:02:55.385] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:02:55.385] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:02:55.386] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:02:55.386] [info] [extruder.cpp:501] [1932] cmd_M104 temp 210 index -1 wait true +[2026-05-03 08:02:55.386] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:210,wait:true +[2026-05-03 08:02:55.991] [info] [verify_heater.cpp:164] [1932] Heater extruder approaching new target of 210 +[2026-05-03 08:03:13.998] [info] [verify_heater.cpp:140] [1932] Heater extruder within range of 210 +[2026-05-03 08:03:20.403] [info] [device_status.cpp:832] [1932] M2202 result_code:1066 +[2026-05-03 08:03:20.404] [info] [heaters.cpp:1198] [1932] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 210 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 08:03:20.405] [info] [device_status.cpp:832] [1932] M2202 result_code:1405 +[2026-05-03 08:03:20.406] [info] [heater_bed.cpp:57] [1932] cmd_M140 temp 60 wait true +[2026-05-03 08:03:20.406] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 08:03:20.406] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 08:03:20.407] [info] [gcode.cpp:544] [1932] respond_ecode: Heater heater_bed not heating at expected rate, error_code: 101 error_level 3 +[2026-05-03 08:03:20.407] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 08:03:20.407] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:60,wait:true +[2026-05-03 08:03:20.408] [info] [device_status.cpp:832] [1932] M2202 result_code:1066 +[2026-05-03 08:03:20.409] [info] [heaters.cpp:1198] [1932] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 60 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 08:03:20.410] [info] [mmu.cpp:4731] [1932] CMD_used_canvas_dev, use canvas 1 +[2026-05-03 08:03:20.410] [info] [virtual_sdcard.cpp:640] [1932] canvas_power_outage_resume printing_used_canvas:1 +[2026-05-03 08:03:20.410] [info] [virtual_sdcard.cpp:646] [1932] canvas_power_outage_resume color_table_size:2 +[2026-05-03 08:03:20.410] [info] [virtual_sdcard.cpp:671] [1932] canvas_power_outage_resume cmd_str:CANVAS_SET_COLOR_TABLE T=0,1 CHANNEL=0,1 +[2026-05-03 08:03:20.411] [info] [mmu.cpp:4347] [1932] Configure channel mapping +[2026-05-03 08:03:20.412] [info] [mmu.cpp:4378] [1932] CMD_canvas_set_color_table #1 T_vec.size 2 table_T 0 table_color 0xFF3700 table_channel 0 +[2026-05-03 08:03:20.412] [info] [mmu.cpp:4378] [1932] CMD_canvas_set_color_table #1 T_vec.size 2 table_T 1 table_color 0x735DF9 table_channel 1 +[2026-05-03 08:03:20.412] [info] [virtual_sdcard.cpp:677] [1932] canvas_power_outage_resume cmd_str:CANVAS_SWITCH_FILAMENT T=0 SELECT=0 +M400 +[2026-05-03 08:03:20.413] [info] [mmu.cpp:3985] [1932] Execute filament switch process, retry:0 +[2026-05-03 08:03:20.413] [info] [mmu.cpp:3988] [1932] T: 0 +[2026-05-03 08:03:20.413] [info] [mmu.cpp:3705] [1932] get_T_channel channel 0 +[2026-05-03 08:03:20.413] [info] [mmu.cpp:3998] [1932] CMD_canvas_switch_filament channel 0 fila_in[channel] 1 ex_fila_status 1 +[2026-05-03 08:03:20.413] [info] [mmu.cpp:2493] [1932] start extrude channel check. +[2026-05-03 08:03:20.413] [info] [gcode_move.cpp:52] [1932] G180 select 812 +[2026-05-03 08:03:20.415] [info] [mcu.cpp:712] [1932] set_digital pin PB7 76.52132729166667 102.177519715 +[2026-05-03 08:03:20.573] [error] [tmc.cpp:359] [1932] TMC extruder reports GSTAT: 10000000 reset=1(Reset) +[2026-05-03 08:03:33.400] [info] [gcode_move.cpp:52] [1932] G180 select 818 +[2026-05-03 08:03:33.405] [info] [mmu.cpp:2529] [1932] step 1 : distance 70.87433026498573 +[2026-05-03 08:03:33.405] [info] [mmu.cpp:2529] [1932] step 1 : distance 0 +[2026-05-03 08:03:33.405] [info] [mmu.cpp:2529] [1932] step 1 : distance 0 +[2026-05-03 08:03:33.405] [info] [mmu.cpp:2529] [1932] step 1 : distance 0 +[2026-05-03 08:03:33.405] [info] [mmu.cpp:2600] [1932] extrude channel check result: 0 +[2026-05-03 08:03:33.405] [info] [mmu.cpp:4315] [1932] Extruder filament sensor triggered +[2026-05-03 08:03:33.406] [info] [mmu.cpp:4752] [1932] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 08:03:33.406] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1210 error_level 3 +[2026-05-03 08:03:33.407] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1211 error_level 3 +[2026-05-03 08:03:33.408] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1220 error_level 3 +[2026-05-03 08:03:33.408] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1231 error_level 3 +[2026-05-03 08:03:33.409] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1232 error_level 3 +[2026-05-03 08:03:33.409] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1241 error_level 3 +[2026-05-03 08:03:33.409] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1242 error_level 3 +[2026-05-03 08:03:33.410] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1243 error_level 3 +[2026-05-03 08:03:33.410] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1251 error_level 3 +[2026-05-03 08:03:33.410] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1252 error_level 3 +[2026-05-03 08:03:33.411] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1265 error_level 3 +[2026-05-03 08:03:33.411] [info] [mmu.cpp:4747] [1932] clear_abnormal_feedback #1 __OVER +[2026-05-03 08:03:33.411] [info] [mmu.cpp:4017] [1932] Execute filament switch process complete, channel 0 +[2026-05-03 08:03:34.626] [info] [clocksync.cpp:199] [1987] mcu 'bed_sensor': New minimum RTT: sent_time=116.38698938799999,half_rtt=0.00016195850000855216,freq=119998073.43584473 +[2026-05-03 08:03:34.628] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:03:37.454] [info] [virtual_sdcard.cpp:1308] [1932] Step 7: extrude filament(100). +[2026-05-03 08:03:57.764] [info] [virtual_sdcard.cpp:1315] [1932] Step 8: turn on the fan. +[2026-05-03 08:03:57.766] [info] [virtual_sdcard.cpp:1322] [1932] Step 9: set pressure advance. +[2026-05-03 08:03:57.767] [info] [gcode.cpp:559] [1932] pressure_advance: 0.043000 +pressure_advance_smooth_time: 0.040000 +[2026-05-03 08:03:58.070] [info] [virtual_sdcard.cpp:1334] [1932] Step 10: set input shaper. +[2026-05-03 08:03:58.073] [info] [gcode.cpp:559] [1932] damping_ratio_x:0.100 shaper_freq_x:52.000000 shaper_type_x:zv +[2026-05-03 08:03:58.074] [info] [gcode.cpp:559] [1932] damping_ratio_y:0.100 shaper_freq_y:52.000000 shaper_type_y:zv +[2026-05-03 08:03:58.075] [info] [virtual_sdcard.cpp:1347] [1932] Step 11: set accel. +[2026-05-03 08:03:58.075] [info] [virtual_sdcard.cpp:1350] [1932] Step 12: move X Y to the position before power outage +[2026-05-03 08:03:58.690] [info] [virtual_sdcard.cpp:1355] [1932] Step 14: move z to the position before power outage +[2026-05-03 08:04:04.422] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:120.27800000037998,last_temp:61.14753063723248,temp:61.14753063723248,target_temp:60,smoothed_temp:61.15376964100162 +[2026-05-03 08:04:06.550] [info] [virtual_sdcard.cpp:1371] [1932] Step 17: set extruder movement mode +[2026-05-03 08:04:06.551] [info] [virtual_sdcard.cpp:1385] [1932] speed_factor 1 speed 5400 +[2026-05-03 08:04:06.551] [info] [virtual_sdcard.cpp:1395] [1932] Step 18: set extruder position +[2026-05-03 08:04:06.552] [info] [virtual_sdcard.cpp:1399] [1932] Step 19: start printing +[2026-05-03 08:04:06.552] [info] [virtual_sdcard.cpp:1016] [1932] do_print_det __start +[2026-05-03 08:04:06.552] [info] [virtual_sdcard.cpp:1029] [1932] do_print_det print_det_value true is_print_det true is_do_resume true print_det_state 3 +[2026-05-03 08:04:06.552] [info] [virtual_sdcard.cpp:1061] [1932] do_resume +[2026-05-03 08:04:06.552] [info] [virtual_sdcard.cpp:1042] [1932] do_print_det __over +[2026-05-03 08:04:06.553] [info] [device_status.cpp:832] [1932] M2202 result_code:2406 +[2026-05-03 08:04:06.556] [info] [device_status.cpp:1782] [1932] refresh print task: id: 9052df81-606e-47e9-ab30-68836972683f, name: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode, printer_time: 4998, time lapse: 0 +[2026-05-03 08:04:06.559] [info] [virtual_sdcard.cpp:1421] [1932] File successfully deleted. +[2026-05-03 08:04:06.560] [info] [webhooks.cpp:170] [1932] return total: {"id":34,"result":{}} +[2026-05-03 08:04:06.560] [info] [virtual_sdcard.cpp:1613] [1932] Starting SD card print (position 2552691) +[2026-05-03 08:04:06.560] [info] [print_stats.cpp:90] [1932] note_start state printing +[2026-05-03 08:04:06.561] [info] [cavity_fan.cpp:189] [1932] update_timer(fan_timer, _NOW +[2026-05-03 08:04:06.561] [info] [cavity_fan.cpp:190] [1932] value printing is_printing true +[2026-05-03 08:04:06.561] [info] [idle_timeout.cpp:138] [1932] handle_print_state print_state:printing +[2026-05-03 08:04:06.561] [info] [cavity_fan.cpp:574] [1932] mode:false cur_box_temp:32.51822830201303 last_speed:0 -> speed:0.1 +[2026-05-03 08:04:06.580] [info] [virtual_sdcard.cpp:1447] [1932] emit gcode:cool_down is_start_print true +[2026-05-03 08:04:06.580] [info] [mmu.cpp:4815] [1932] get_fila_type connect_status 1 fila_type.size 2 channel_color_table.size:2 +[2026-05-03 08:04:06.580] [info] [mmu.cpp:4829] [1932] get_fila_type cavity_temp_mode:false +[2026-05-03 08:04:06.581] [info] [servo.cpp:272] [1932] CMD_set_cavity_temperature_mode mode:0 +[2026-05-03 08:04:06.582] [info] [servo.cpp:249] [1932] start grille open check. +[2026-05-03 08:04:06.582] [info] [cavity_fan.cpp:255] [1932] cool_down_cavity_temp fila_type[0]:PLA,fila_type[i].size:3,fila_type.size:2 +[2026-05-03 08:04:06.582] [info] [cavity_fan.cpp:263] [1932] find_fila_type:0 fila_box_temp:40 +[2026-05-03 08:04:06.582] [info] [cavity_fan.cpp:298] [1932] std::isnan(fila_temp):false fila_box_temp:40 +[2026-05-03 08:04:06.582] [info] [cavity_fan.cpp:311] [1932] fila_box_temp:40,iType:0 +[2026-05-03 08:04:06.583] [info] [cavity_fan.cpp:255] [1932] cool_down_cavity_temp fila_type[1]:PLA,fila_type[i].size:3,fila_type.size:2 +[2026-05-03 08:04:06.583] [info] [cavity_fan.cpp:263] [1932] find_fila_type:0 fila_box_temp:40 +[2026-05-03 08:04:06.583] [info] [cavity_fan.cpp:298] [1932] std::isnan(fila_temp):false fila_box_temp:40 +[2026-05-03 08:04:06.583] [info] [cavity_fan.cpp:311] [1932] fila_box_temp:40,iType:0 +[2026-05-03 08:04:06.583] [info] [pause_resume.cpp:126] [1932] PauseResume cool_down_state 0x0e +[2026-05-03 08:04:06.583] [info] [virtual_sdcard.cpp:166] [1932] VirtualSD cool_down_state 0x0e +[2026-05-03 08:04:06.583] [info] [cavity_fan.cpp:331] [1932] update_timer(cavity_temp_timer, _NEVER +[2026-05-03 08:04:06.583] [info] [cavity_fan.cpp:333] [1932] cool_down_cavity_temp iType:0 fila_box_temp:40 cur_box_temp 32.51822830201303 cool_down_state 0x0e +[2026-05-03 08:04:07.584] [info] [virtual_sdcard.cpp:970] [1932] print_det_handler print_det_state 4 score_state 0xff cool_down_state 0x0e +[2026-05-03 08:04:07.584] [info] [virtual_sdcard.cpp:987] [1932] print_det_handler print_det_state 4 is_print_det false +[2026-05-03 08:04:07.584] [info] [virtual_sdcard.cpp:996] [1932] print_det_handler __over is_print_det false print_stop false cool_down_state 0x0e score_state 0xff +[2026-05-03 08:04:08.694] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:04:10.565] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:126.42026962085426,last_temp:211.90317732244984,temp:211.90317732244984,target_temp:210,smoothed_temp:211.83498536026923 +[2026-05-03 08:04:14.015] [info] [clocksync.cpp:199] [1984] mcu 'mcu': New minimum RTT: sent_time=155.775924574,half_rtt=8.339550001323914e-05,freq=24000003.52071666 +[2026-05-03 08:04:34.695] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:04:38.739] [info] [filament_motion_sensor.cpp:154] [1932] CMD_encoder_sensor_switch:true +[2026-05-03 08:04:38.740] [info] [webhooks.cpp:170] [1932] return total: {"id":35,"result":{}} +[2026-05-03 08:04:52.416] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=194.17639100899999,half_rtt=0.000252145500013512,freq=119997704.1050182 +[2026-05-03 08:04:53.102] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:41 +[2026-05-03 08:04:53.103] [info] [gcode.cpp:1051] [1932] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 08:04:53.103] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = false +[2026-05-03 08:04:57.075] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:05:24.976] [info] [clocksync.cpp:199] [1984] mcu 'mcu': New minimum RTT: sent_time=226.736969691,half_rtt=8.089549999112933e-05,freq=24000009.180409856 +[2026-05-03 08:05:28.852] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:05:42.740] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:42 +[2026-05-03 08:05:42.741] [info] [gcode.cpp:1051] [1932] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 08:05:42.741] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = false +[2026-05-03 08:05:45.629] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:06:04.422] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:240.27800000038,last_temp:59.868431475981424,temp:59.868431475981424,target_temp:60,smoothed_temp:59.87522346282593 +[2026-05-03 08:06:10.567] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:246.42257464611825,last_temp:212.0664294708875,temp:212.0664294708875,target_temp:210,smoothed_temp:211.28323407627926 +[2026-05-03 08:06:30.621] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:43 +[2026-05-03 08:06:30.622] [info] [gcode.cpp:1051] [1932] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 08:06:30.622] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = false +[2026-05-03 08:06:33.463] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:07:19.158] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:44 +[2026-05-03 08:07:33.942] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:08:04.920] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:360.77800000037996,last_temp:59.91008089223817,temp:59.91008089223817,target_temp:60,smoothed_temp:59.96559375222583 +[2026-05-03 08:08:10.567] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:366.42486169690795,last_temp:209.71017428641557,temp:209.71017428641557,target_temp:210,smoothed_temp:209.21490647179658 +[2026-05-03 08:08:38.483] [info] [gcode.cpp:1051] [1932] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 08:08:38.483] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = false +[2026-05-03 08:08:38.484] [info] [gcode_move.cpp:638] [1932] cmd_M220 speed 500 speed_factor 0.016666666666666666 100 +[2026-05-03 08:08:38.770] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:08:38.770] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:08:38.770] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:08:38.771] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:08:38.772] [info] [extruder.cpp:501] [1932] cmd_M104 temp 210 index -1 wait false +[2026-05-03 08:08:38.772] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:210,wait:false +[2026-05-03 08:08:38.776] [info] [gcode.cpp:559] [1932] Unknown command: T1 +[2026-05-03 08:08:38.777] [info] [mmu.cpp:4520] [1932] M6211 start +[2026-05-03 08:08:38.777] [info] [mmu.cpp:4540] [1932] M6211 printable_height 256 T 1 A false K 75 L 221.845 M 523 N 523 I 0 J 179 P 5000 Q 210 S 210 R 240 C 2 D 2 +[2026-05-03 08:08:38.777] [info] [mmu.cpp:3705] [1932] get_T_channel channel 1 +[2026-05-03 08:08:38.778] [info] [mmu.cpp:4556] [1932] M6211 z_move 11.826905297101863 accel 10000 +[2026-05-03 08:08:38.782] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:08:38.782] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:08:38.782] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:08:38.784] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:08:38.784] [info] [extruder.cpp:501] [1932] cmd_M104 temp 210 index -1 wait false +[2026-05-03 08:08:38.784] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:210,wait:false +[2026-05-03 08:08:38.784] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:08:38.784] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:08:38.785] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:08:38.786] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:08:38.786] [info] [extruder.cpp:501] [1932] cmd_M104 temp 240 index -1 wait false +[2026-05-03 08:08:38.786] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:240,wait:false +[2026-05-03 08:08:38.787] [info] [mmu.cpp:3985] [1932] Execute filament switch process, retry:0 +[2026-05-03 08:08:38.787] [info] [mmu.cpp:3988] [1932] T: 1 +[2026-05-03 08:08:38.787] [info] [mmu.cpp:3705] [1932] get_T_channel channel 1 +[2026-05-03 08:08:38.787] [info] [mmu.cpp:3998] [1932] CMD_canvas_switch_filament channel 1 fila_in[channel] 1 ex_fila_status 1 +[2026-05-03 08:08:38.787] [info] [mmu.cpp:2493] [1932] start extrude channel check. +[2026-05-03 08:08:38.787] [info] [mmu.cpp:2502] [1932] extrude channel check result: 0 ex_fila_status:1 +[2026-05-03 08:08:38.788] [info] [mmu.cpp:4204] [1932] Execute cutting action +[2026-05-03 08:08:38.789] [info] [homing_override.cpp:238] [1932] need true true false homed true true true +[2026-05-03 08:08:38.789] [info] [gcode_move.cpp:52] [1932] G180 select 813 +[2026-05-03 08:08:39.446] [info] [verify_heater.cpp:164] [1932] Heater extruder approaching new target of 240 +[2026-05-03 08:08:44.033] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"1"} +[2026-05-03 08:08:44.039] [info] [cutting_switch_sensor.cpp:103] [1932] cutting detect state:true +[2026-05-03 08:08:44.713] [info] [gcode_move.cpp:52] [1932] G180 select 815 +[2026-05-03 08:08:45.523] [info] [gcode_move.cpp:52] [1932] G180 select 800 +[2026-05-03 08:08:45.524] [info] [gcode.cpp:957] [1932] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=220.7256625627037 +[2026-05-03 08:08:45.524] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = true +[2026-05-03 08:08:45.525] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:08:45.933] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"0"} +[2026-05-03 08:08:45.935] [info] [cutting_switch_sensor.cpp:103] [1932] cutting detect state:false +[2026-05-03 08:08:47.014] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:08:48.205] [info] [gcode_move.cpp:52] [1932] G180 select 816 +[2026-05-03 08:08:50.124] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:08:50.452] [info] [verify_heater.cpp:140] [1932] Heater extruder within range of 240 +[2026-05-03 08:08:51.125] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir -1 channel: 0 +[2026-05-03 08:08:51.125] [info] [mmu.cpp:4235] [1932] Execute cutting action. complete +[2026-05-03 08:08:51.126] [info] [mmu.cpp:4256] [1932] Execute extruder head filament plug out. channel: 0 +[2026-05-03 08:08:51.126] [info] [mmu.cpp:2206] [1932] status[channel] 2 fila_in[channel] 1 +[2026-05-03 08:08:51.126] [info] [mmu.cpp:2246] [1932] clean_waste __OVER +[2026-05-03 08:08:51.126] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:08:52.127] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir -1 channel: 0 +[2026-05-03 08:08:53.043] [info] [mmu.cpp:2266] [1932] retract last_pos_1 channel: 0 ch_1: 888.8822254066961 ch_2: 0 ch_3: 0 ch_4: 0 +[2026-05-03 08:08:53.537] [info] [filament_switch_sensor.cpp:332] [1932] _button_handler switch_fila_det false +[2026-05-03 08:08:53.538] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"0"} +[2026-05-03 08:08:55.181] [info] [mmu.cpp:2289] [1932] ex_fila_status 0 channel 0 pre_pos 888.8822254066961 cur_pos 992.2406237098003 +[2026-05-03 08:08:55.181] [info] [mmu.cpp:2296] [1932] retract cur_pos_1 channel: 0 ch_1: 992.2406237098003 ch_2: 0 ch_3: 0 ch_4: 0 +[2026-05-03 08:08:55.181] [info] [mmu.cpp:4306] [1932] Execute extruder head filament plug out complete, channel: 0 +[2026-05-03 08:08:55.182] [info] [mmu.cpp:4330] [1932] Execute filament plug in process. channel: 1 +[2026-05-03 08:08:55.182] [info] [mmu.cpp:2859] [1932] exec auto refill filament start, befor_channel 1 ex_fila_status 0 canvas_status 1 +[2026-05-03 08:08:55.182] [info] [mmu.cpp:2911] [1932] exec auto refill filament over, after_channel 1 ex_fila_status 0 canvas_status 1 +[2026-05-03 08:08:55.182] [info] [mmu.cpp:2356] [1932] feed last_pos_1 channel: 1 ch_1: 992.2406237098003 ch_2: 0 ch_3: 0 ch_4: 0 +[2026-05-03 08:09:10.680] [info] [filament_switch_sensor.cpp:332] [1932] _button_handler switch_fila_det true +[2026-05-03 08:09:10.680] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-03 08:09:11.634] [info] [mmu.cpp:2395] [1932] feed last_pos_2 channel: 1 ch_1: 992.2406237098003 ch_2: 546.322962459265 ch_3: 0 ch_4: 0 +[2026-05-03 08:09:11.635] [info] [gcode_move.cpp:52] [1932] G180 select 820 +[2026-05-03 08:09:11.646] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=453.408325382,half_rtt=0.00025189599998043377,freq=119997682.7411982 +[2026-05-03 08:09:15.972] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:09:16.972] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir 1 channel: 1 +[2026-05-03 08:09:16.972] [info] [mmu.cpp:2400] [1932] retry_count 1 last_position 546.322962459265 ch_position 555.1822537423883 +[2026-05-03 08:09:16.973] [info] [mmu.cpp:2406] [1932] feed cur_pos_2 channel: 1 ch_1: 992.2406237098003 ch_2: 555.1822537423883 ch_3: 0 ch_4: 0 +[2026-05-03 08:09:16.973] [info] [mmu.cpp:2423] [1932] extruder_feed success, channel = 1 +[2026-05-03 08:09:16.973] [info] [mmu.cpp:4340] [1932] Execute filament plug in process complete. channel: 1 +[2026-05-03 08:09:16.973] [info] [mmu.cpp:4752] [1932] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 08:09:16.973] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1210 error_level 3 +[2026-05-03 08:09:16.974] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1211 error_level 3 +[2026-05-03 08:09:16.974] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1220 error_level 3 +[2026-05-03 08:09:16.974] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1231 error_level 3 +[2026-05-03 08:09:16.975] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1232 error_level 3 +[2026-05-03 08:09:16.975] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1241 error_level 3 +[2026-05-03 08:09:16.975] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1242 error_level 3 +[2026-05-03 08:09:16.975] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1243 error_level 3 +[2026-05-03 08:09:16.976] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1251 error_level 3 +[2026-05-03 08:09:16.976] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1252 error_level 3 +[2026-05-03 08:09:16.977] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1265 error_level 3 +[2026-05-03 08:09:16.977] [info] [mmu.cpp:4747] [1932] clear_abnormal_feedback #1 __OVER +[2026-05-03 08:09:16.977] [info] [mmu.cpp:4017] [1932] Execute filament switch process complete, channel 1 +[2026-05-03 08:09:16.979] [info] [device_status.cpp:832] [1932] M2202 result_code:1045 +[2026-05-03 08:09:16.980] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:09:16.980] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:09:16.980] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:09:16.981] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:09:16.981] [info] [extruder.cpp:501] [1932] cmd_M104 temp 240 index -1 wait true +[2026-05-03 08:09:16.981] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:240,wait:true +[2026-05-03 08:09:17.983] [info] [device_status.cpp:832] [1932] M2202 result_code:1066 +[2026-05-03 08:09:17.984] [info] [heaters.cpp:1198] [1932] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 240 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 08:09:17.986] [info] [mmu.cpp:4604] [1932] M6211 flush_times 3 flush_length_actual 68.94833333333334 +[2026-05-03 08:09:17.987] [info] [gcode_move.cpp:52] [1932] G180 select 819 +[2026-05-03 08:09:35.469] [info] [gcode_move.cpp:52] [1932] G180 select 818 +[2026-05-03 08:09:35.476] [info] [gcode_move.cpp:52] [1932] G180 select 819 +[2026-05-03 08:09:52.496] [info] [gcode_move.cpp:52] [1932] G180 select 818 +[2026-05-03 08:09:52.502] [info] [device_status.cpp:832] [1932] M2202 result_code:1045 +[2026-05-03 08:09:52.503] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:09:52.504] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:09:52.504] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:09:52.504] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:09:52.504] [info] [extruder.cpp:501] [1932] cmd_M104 temp 210 index -1 wait true +[2026-05-03 08:09:52.505] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:210,wait:true +[2026-05-03 08:10:05.420] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:481.27800000037996,last_temp:60.18089253375177,temp:60.18089253375177,target_temp:60,smoothed_temp:60.18252000375422 +[2026-05-03 08:10:10.570] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:486.42717892783213,last_temp:218.5418905680799,temp:218.5418905680799,target_temp:210,smoothed_temp:219.11440412006874 +[2026-05-03 08:10:18.520] [info] [device_status.cpp:832] [1932] M2202 result_code:1066 +[2026-05-03 08:10:18.521] [info] [heaters.cpp:1198] [1932] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 210 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 08:10:18.825] [info] [gcode_move.cpp:52] [1932] G180 select 819 +[2026-05-03 08:10:35.460] [info] [gcode_move.cpp:52] [1932] G180 select 818 +[2026-05-03 08:10:35.465] [info] [mmu.cpp:4633] [1932] M6211 over. complete +[2026-05-03 08:10:43.820] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:10:44.213] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=545.9754785509999,half_rtt=0.0002509170000166705,freq=119997754.43677253 +[2026-05-03 08:10:44.215] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:10:45.197] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=546.959332552,half_rtt=0.0002491249999820866,freq=119997749.00531311 +[2026-05-03 08:10:58.738] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:45 +[2026-05-03 08:11:06.922] [info] [clocksync.cpp:199] [1984] mcu 'mcu': New minimum RTT: sent_time=568.685025354,half_rtt=7.166649999135188e-05,freq=24000000.25556237 +[2026-05-03 08:11:11.153] [info] [gcode.cpp:1051] [1932] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 08:11:11.153] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = false +[2026-05-03 08:11:11.154] [info] [gcode_move.cpp:638] [1932] cmd_M220 speed 500 speed_factor 0.016666666666666666 100 +[2026-05-03 08:11:11.701] [info] [gcode.cpp:559] [1932] Unknown command: T0 +[2026-05-03 08:11:11.702] [info] [mmu.cpp:4520] [1932] M6211 start +[2026-05-03 08:11:11.702] [info] [mmu.cpp:4540] [1932] M6211 printable_height 256 T 0 A false K 75 L 62.1965 M 523 N 523 I 0 J 179 P 5000 Q 210 S 210 R 240 C 2 D 2 +[2026-05-03 08:11:11.702] [info] [mmu.cpp:3705] [1932] get_T_channel channel 0 +[2026-05-03 08:11:11.703] [info] [mmu.cpp:4556] [1932] M6211 z_move 12.026905297101862 accel 10000 +[2026-05-03 08:11:11.707] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:11:11.707] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:11:11.707] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:11:11.708] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:11:11.708] [info] [extruder.cpp:501] [1932] cmd_M104 temp 210 index -1 wait false +[2026-05-03 08:11:11.708] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:210,wait:false +[2026-05-03 08:11:11.709] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:11:11.709] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:11:11.709] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:11:11.709] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:11:11.709] [info] [extruder.cpp:501] [1932] cmd_M104 temp 240 index -1 wait false +[2026-05-03 08:11:11.710] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:240,wait:false +[2026-05-03 08:11:11.711] [info] [mmu.cpp:3985] [1932] Execute filament switch process, retry:0 +[2026-05-03 08:11:11.711] [info] [mmu.cpp:3988] [1932] T: 0 +[2026-05-03 08:11:11.711] [info] [mmu.cpp:3705] [1932] get_T_channel channel 0 +[2026-05-03 08:11:11.711] [info] [mmu.cpp:3998] [1932] CMD_canvas_switch_filament channel 0 fila_in[channel] 1 ex_fila_status 1 +[2026-05-03 08:11:11.711] [info] [mmu.cpp:2493] [1932] start extrude channel check. +[2026-05-03 08:11:11.711] [info] [mmu.cpp:2502] [1932] extrude channel check result: 1 ex_fila_status:1 +[2026-05-03 08:11:11.711] [info] [mmu.cpp:4204] [1932] Execute cutting action +[2026-05-03 08:11:11.712] [info] [homing_override.cpp:238] [1932] need true true false homed true true true +[2026-05-03 08:11:11.712] [info] [gcode_move.cpp:52] [1932] G180 select 813 +[2026-05-03 08:11:12.577] [info] [verify_heater.cpp:164] [1932] Heater extruder approaching new target of 240 +[2026-05-03 08:11:17.032] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"1"} +[2026-05-03 08:11:17.040] [info] [cutting_switch_sensor.cpp:103] [1932] cutting detect state:true +[2026-05-03 08:11:17.699] [info] [gcode_move.cpp:52] [1932] G180 select 815 +[2026-05-03 08:11:18.524] [info] [gcode_move.cpp:52] [1932] G180 select 800 +[2026-05-03 08:11:18.525] [info] [gcode.cpp:957] [1932] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=223.0656245169805 +[2026-05-03 08:11:18.525] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = true +[2026-05-03 08:11:18.526] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:11:18.934] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"0"} +[2026-05-03 08:11:18.939] [info] [cutting_switch_sensor.cpp:103] [1932] cutting detect state:false +[2026-05-03 08:11:21.202] [info] [gcode_move.cpp:52] [1932] G180 select 816 +[2026-05-03 08:11:22.591] [info] [verify_heater.cpp:140] [1932] Heater extruder within range of 240 +[2026-05-03 08:11:23.131] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:11:24.132] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir -1 channel: 1 +[2026-05-03 08:11:24.132] [info] [mmu.cpp:4235] [1932] Execute cutting action. complete +[2026-05-03 08:11:24.133] [info] [mmu.cpp:4256] [1932] Execute extruder head filament plug out. channel: 1 +[2026-05-03 08:11:24.133] [info] [mmu.cpp:2206] [1932] status[channel] 2 fila_in[channel] 1 +[2026-05-03 08:11:24.133] [info] [mmu.cpp:2246] [1932] clean_waste __OVER +[2026-05-03 08:11:24.134] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:11:25.135] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir -1 channel: 1 +[2026-05-03 08:11:26.052] [info] [mmu.cpp:2266] [1932] retract last_pos_1 channel: 1 ch_1: 992.2406237098003 ch_2: 874.116739934824 ch_3: 0 ch_4: 0 +[2026-05-03 08:11:26.534] [info] [filament_switch_sensor.cpp:332] [1932] _button_handler switch_fila_det false +[2026-05-03 08:11:26.535] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"0"} +[2026-05-03 08:11:27.987] [info] [mmu.cpp:2289] [1932] ex_fila_status 0 channel 1 pre_pos 874.116739934824 cur_pos 974.5220411435539 +[2026-05-03 08:11:27.987] [info] [mmu.cpp:2296] [1932] retract cur_pos_1 channel: 1 ch_1: 992.2406237098003 ch_2: 974.5220411435539 ch_3: 0 ch_4: 0 +[2026-05-03 08:11:27.988] [info] [mmu.cpp:4306] [1932] Execute extruder head filament plug out complete, channel: 1 +[2026-05-03 08:11:27.988] [info] [mmu.cpp:4330] [1932] Execute filament plug in process. channel: 0 +[2026-05-03 08:11:27.988] [info] [mmu.cpp:2859] [1932] exec auto refill filament start, befor_channel 0 ex_fila_status 0 canvas_status 1 +[2026-05-03 08:11:27.988] [info] [mmu.cpp:2911] [1932] exec auto refill filament over, after_channel 0 ex_fila_status 0 canvas_status 1 +[2026-05-03 08:11:27.989] [info] [mmu.cpp:2356] [1932] feed last_pos_1 channel: 0 ch_1: 992.2406237098003 ch_2: 974.5220411435539 ch_3: 0 ch_4: 0 +[2026-05-03 08:11:31.214] [info] [filament_switch_sensor.cpp:332] [1932] _button_handler switch_fila_det true +[2026-05-03 08:11:31.215] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-03 08:11:32.235] [info] [mmu.cpp:2395] [1932] feed last_pos_2 channel: 0 ch_1: 1101.5052162016532 ch_2: 974.5220411435539 ch_3: 0 ch_4: 0 +[2026-05-03 08:11:32.236] [info] [gcode_move.cpp:52] [1932] G180 select 820 +[2026-05-03 08:11:36.570] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:11:37.571] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir 1 channel: 0 +[2026-05-03 08:11:37.572] [info] [mmu.cpp:2400] [1932] retry_count 1 last_position 1101.5052162016532 ch_position 1110.3645074847766 +[2026-05-03 08:11:37.572] [info] [mmu.cpp:2406] [1932] feed cur_pos_2 channel: 0 ch_1: 1110.3645074847766 ch_2: 974.5220411435539 ch_3: 0 ch_4: 0 +[2026-05-03 08:11:37.572] [info] [mmu.cpp:2423] [1932] extruder_feed success, channel = 0 +[2026-05-03 08:11:37.572] [info] [mmu.cpp:4340] [1932] Execute filament plug in process complete. channel: 0 +[2026-05-03 08:11:37.572] [info] [mmu.cpp:4752] [1932] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 08:11:37.572] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1210 error_level 3 +[2026-05-03 08:11:37.573] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1211 error_level 3 +[2026-05-03 08:11:37.573] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1220 error_level 3 +[2026-05-03 08:11:37.574] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1231 error_level 3 +[2026-05-03 08:11:37.574] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1232 error_level 3 +[2026-05-03 08:11:37.576] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1241 error_level 3 +[2026-05-03 08:11:37.576] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1242 error_level 3 +[2026-05-03 08:11:37.577] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1243 error_level 3 +[2026-05-03 08:11:37.577] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1251 error_level 3 +[2026-05-03 08:11:37.577] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1252 error_level 3 +[2026-05-03 08:11:37.578] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1265 error_level 3 +[2026-05-03 08:11:37.579] [info] [mmu.cpp:4747] [1932] clear_abnormal_feedback #1 __OVER +[2026-05-03 08:11:37.579] [info] [mmu.cpp:4017] [1932] Execute filament switch process complete, channel 0 +[2026-05-03 08:11:37.582] [info] [mmu.cpp:4604] [1932] M6211 flush_times 1 flush_length_actual 47.1965 +[2026-05-03 08:11:37.584] [info] [device_status.cpp:832] [1932] M2202 result_code:1045 +[2026-05-03 08:11:37.585] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:11:37.585] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:11:37.585] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:11:37.586] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:11:37.586] [info] [extruder.cpp:501] [1932] cmd_M104 temp 210 index -1 wait true +[2026-05-03 08:11:37.586] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:210,wait:true +[2026-05-03 08:12:02.600] [info] [device_status.cpp:832] [1932] M2202 result_code:1066 +[2026-05-03 08:12:02.601] [info] [heaters.cpp:1198] [1932] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 210 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 08:12:02.904] [info] [gcode_move.cpp:52] [1932] G180 select 819 +[2026-05-03 08:12:05.920] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:601.77800000038,last_temp:60.18436552769447,temp:60.18436552769447,target_temp:60,smoothed_temp:60.20382340710903 +[2026-05-03 08:12:10.572] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:606.4295043297383,last_temp:209.5870443355738,temp:209.5870443355738,target_temp:210,smoothed_temp:209.3914731635588 +[2026-05-03 08:12:19.537] [info] [gcode_move.cpp:52] [1932] G180 select 818 +[2026-05-03 08:12:19.542] [info] [mmu.cpp:4633] [1932] M6211 over. complete +[2026-05-03 08:12:27.912] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:12:42.329] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:13:13.076] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=694.839121206,half_rtt=0.000244833000010658,freq=119997706.59192984 +[2026-05-03 08:13:34.266] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:46 +[2026-05-03 08:14:06.420] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:722.27800000038,last_temp:59.97256182858416,temp:59.97256182858416,target_temp:60,smoothed_temp:59.971950384782936 +[2026-05-03 08:14:10.574] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:726.4317858497387,last_temp:210.39783189044772,temp:210.39783189044772,target_temp:210,smoothed_temp:209.8567448017827 +[2026-05-03 08:15:02.513] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:15:10.391] [info] [clocksync.cpp:212] [1989] mcu 'toolhead': Ignoring clock sample: sent_time=812.153555262,time_avg=782.5938049827355,freq=119997696.24346824,diff=96980.06210327148(0.000808167184193929),stddev=1666.7264083897694 +[2026-05-03 08:15:15.112] [info] [gcode.cpp:1051] [1932] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 08:15:15.113] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = false +[2026-05-03 08:15:15.114] [info] [gcode_move.cpp:638] [1932] cmd_M220 speed 500 speed_factor 0.016666666666666666 100 +[2026-05-03 08:15:15.263] [info] [gcode.cpp:559] [1932] Unknown command: T1 +[2026-05-03 08:15:15.265] [info] [mmu.cpp:4520] [1932] M6211 start +[2026-05-03 08:15:15.265] [info] [mmu.cpp:4540] [1932] M6211 printable_height 256 T 1 A false K 75 L 221.845 M 523 N 523 I 0 J 179 P 5000 Q 210 S 210 R 240 C 2 D 2 +[2026-05-03 08:15:15.265] [info] [mmu.cpp:3705] [1932] get_T_channel channel 1 +[2026-05-03 08:15:15.266] [info] [mmu.cpp:4556] [1932] M6211 z_move 12.226905297101862 accel 10000 +[2026-05-03 08:15:15.270] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:15:15.270] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:15:15.270] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:15:15.271] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:15:15.271] [info] [extruder.cpp:501] [1932] cmd_M104 temp 210 index -1 wait false +[2026-05-03 08:15:15.271] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:210,wait:false +[2026-05-03 08:15:15.271] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:15:15.271] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:15:15.271] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:15:15.272] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:15:15.272] [info] [extruder.cpp:501] [1932] cmd_M104 temp 240 index -1 wait false +[2026-05-03 08:15:15.272] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:240,wait:false +[2026-05-03 08:15:15.273] [info] [mmu.cpp:3985] [1932] Execute filament switch process, retry:0 +[2026-05-03 08:15:15.273] [info] [mmu.cpp:3988] [1932] T: 1 +[2026-05-03 08:15:15.273] [info] [mmu.cpp:3705] [1932] get_T_channel channel 1 +[2026-05-03 08:15:15.273] [info] [mmu.cpp:3998] [1932] CMD_canvas_switch_filament channel 1 fila_in[channel] 1 ex_fila_status 1 +[2026-05-03 08:15:15.273] [info] [mmu.cpp:2493] [1932] start extrude channel check. +[2026-05-03 08:15:15.273] [info] [mmu.cpp:2502] [1932] extrude channel check result: 0 ex_fila_status:1 +[2026-05-03 08:15:15.274] [info] [mmu.cpp:4204] [1932] Execute cutting action +[2026-05-03 08:15:15.274] [info] [homing_override.cpp:238] [1932] need true true false homed true true true +[2026-05-03 08:15:15.275] [info] [gcode_move.cpp:52] [1932] G180 select 813 +[2026-05-03 08:15:15.870] [info] [verify_heater.cpp:164] [1932] Heater extruder approaching new target of 240 +[2026-05-03 08:15:20.556] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"1"} +[2026-05-03 08:15:20.559] [info] [cutting_switch_sensor.cpp:103] [1932] cutting detect state:true +[2026-05-03 08:15:21.247] [info] [gcode_move.cpp:52] [1932] G180 select 815 +[2026-05-03 08:15:22.058] [info] [gcode_move.cpp:52] [1932] G180 select 800 +[2026-05-03 08:15:22.059] [info] [gcode.cpp:957] [1932] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=223.02460490396643 +[2026-05-03 08:15:22.059] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = true +[2026-05-03 08:15:22.060] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:15:22.470] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"0"} +[2026-05-03 08:15:22.480] [info] [cutting_switch_sensor.cpp:103] [1932] cutting detect state:false +[2026-05-03 08:15:24.739] [info] [gcode_move.cpp:52] [1932] G180 select 816 +[2026-05-03 08:15:26.657] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:15:26.877] [info] [verify_heater.cpp:140] [1932] Heater extruder within range of 240 +[2026-05-03 08:15:27.659] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir -1 channel: 0 +[2026-05-03 08:15:27.659] [info] [mmu.cpp:4235] [1932] Execute cutting action. complete +[2026-05-03 08:15:27.659] [info] [mmu.cpp:4256] [1932] Execute extruder head filament plug out. channel: 0 +[2026-05-03 08:15:27.660] [info] [mmu.cpp:2206] [1932] status[channel] 2 fila_in[channel] 1 +[2026-05-03 08:15:27.660] [info] [mmu.cpp:2246] [1932] clean_waste __OVER +[2026-05-03 08:15:27.660] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:15:28.661] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir -1 channel: 0 +[2026-05-03 08:15:29.583] [info] [mmu.cpp:2266] [1932] retract last_pos_1 channel: 0 ch_1: 1656.6874699440418 ch_2: 974.5220411435539 ch_3: 0 ch_4: 0 +[2026-05-03 08:15:30.074] [info] [filament_switch_sensor.cpp:332] [1932] _button_handler switch_fila_det false +[2026-05-03 08:15:30.075] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"0"} +[2026-05-03 08:15:31.521] [info] [mmu.cpp:2289] [1932] ex_fila_status 0 channel 0 pre_pos 1656.6874699440418 cur_pos 1757.0927711527715 +[2026-05-03 08:15:31.521] [info] [mmu.cpp:2296] [1932] retract cur_pos_1 channel: 0 ch_1: 1757.0927711527715 ch_2: 974.5220411435539 ch_3: 0 ch_4: 0 +[2026-05-03 08:15:31.521] [info] [mmu.cpp:4306] [1932] Execute extruder head filament plug out complete, channel: 0 +[2026-05-03 08:15:31.522] [info] [mmu.cpp:4330] [1932] Execute filament plug in process. channel: 1 +[2026-05-03 08:15:31.522] [info] [mmu.cpp:2859] [1932] exec auto refill filament start, befor_channel 1 ex_fila_status 0 canvas_status 1 +[2026-05-03 08:15:31.522] [info] [mmu.cpp:2911] [1932] exec auto refill filament over, after_channel 1 ex_fila_status 0 canvas_status 1 +[2026-05-03 08:15:31.522] [info] [mmu.cpp:2356] [1932] feed last_pos_1 channel: 1 ch_1: 1757.0927711527715 ch_2: 974.5220411435539 ch_3: 0 ch_4: 0 +[2026-05-03 08:15:34.656] [info] [filament_switch_sensor.cpp:332] [1932] _button_handler switch_fila_det true +[2026-05-03 08:15:34.657] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-03 08:15:35.658] [info] [mmu.cpp:2395] [1932] feed last_pos_2 channel: 1 ch_1: 1757.0927711527715 ch_2: 1080.8335365410326 ch_3: 0 ch_4: 0 +[2026-05-03 08:15:35.658] [info] [gcode_move.cpp:52] [1932] G180 select 820 +[2026-05-03 08:15:37.961] [info] [clocksync.cpp:212] [1989] mcu 'toolhead': Ignoring clock sample: sent_time=839.7229207749999,time_avg=809.782121539136,freq=119997682.27158317,diff=77036.39270019531(0.0006419699391682943),stddev=1210.3958943319622 +[2026-05-03 08:15:40.002] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:15:41.003] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir 1 channel: 1 +[2026-05-03 08:15:41.003] [info] [mmu.cpp:2400] [1932] retry_count 1 last_position 1080.8335365410326 ch_position 1086.7397307297813 +[2026-05-03 08:15:41.003] [info] [mmu.cpp:2406] [1932] feed cur_pos_2 channel: 1 ch_1: 1757.0927711527715 ch_2: 1086.7397307297813 ch_3: 0 ch_4: 0 +[2026-05-03 08:15:41.004] [info] [gcode_move.cpp:52] [1932] G180 select 820 +[2026-05-03 08:15:45.342] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:15:46.343] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir 1 channel: 1 +[2026-05-03 08:15:46.343] [info] [mmu.cpp:2400] [1932] retry_count 2 last_position 1080.8335365410326 ch_position 1095.5990220129045 +[2026-05-03 08:15:46.343] [info] [mmu.cpp:2406] [1932] feed cur_pos_2 channel: 1 ch_1: 1757.0927711527715 ch_2: 1095.5990220129045 ch_3: 0 ch_4: 0 +[2026-05-03 08:15:46.343] [info] [mmu.cpp:2423] [1932] extruder_feed success, channel = 1 +[2026-05-03 08:15:46.343] [info] [mmu.cpp:4340] [1932] Execute filament plug in process complete. channel: 1 +[2026-05-03 08:15:46.343] [info] [mmu.cpp:4752] [1932] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 08:15:46.343] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1210 error_level 3 +[2026-05-03 08:15:46.344] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1211 error_level 3 +[2026-05-03 08:15:46.344] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1220 error_level 3 +[2026-05-03 08:15:46.346] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1231 error_level 3 +[2026-05-03 08:15:46.346] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1232 error_level 3 +[2026-05-03 08:15:46.347] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1241 error_level 3 +[2026-05-03 08:15:46.347] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1242 error_level 3 +[2026-05-03 08:15:46.347] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1243 error_level 3 +[2026-05-03 08:15:46.348] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1251 error_level 3 +[2026-05-03 08:15:46.348] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1252 error_level 3 +[2026-05-03 08:15:46.349] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1265 error_level 3 +[2026-05-03 08:15:46.350] [info] [mmu.cpp:4747] [1932] clear_abnormal_feedback #1 __OVER +[2026-05-03 08:15:46.350] [info] [mmu.cpp:4017] [1932] Execute filament switch process complete, channel 1 +[2026-05-03 08:15:46.355] [info] [device_status.cpp:832] [1932] M2202 result_code:1045 +[2026-05-03 08:15:46.356] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:15:46.356] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:15:46.356] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:15:46.356] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:15:46.356] [info] [extruder.cpp:501] [1932] cmd_M104 temp 240 index -1 wait true +[2026-05-03 08:15:46.357] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:240,wait:true +[2026-05-03 08:15:47.358] [info] [device_status.cpp:832] [1932] M2202 result_code:1066 +[2026-05-03 08:15:47.359] [info] [heaters.cpp:1198] [1932] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 240 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 08:15:47.362] [info] [mmu.cpp:4604] [1932] M6211 flush_times 3 flush_length_actual 68.94833333333334 +[2026-05-03 08:15:47.363] [info] [gcode_move.cpp:52] [1932] G180 select 819 +[2026-05-03 08:16:04.843] [info] [gcode_move.cpp:52] [1932] G180 select 818 +[2026-05-03 08:16:04.853] [info] [gcode_move.cpp:52] [1932] G180 select 819 +[2026-05-03 08:16:06.920] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:842.77800000038,last_temp:60.312885715969685,temp:60.312885715969685,target_temp:60,smoothed_temp:60.294291745016764 +[2026-05-03 08:16:10.576] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:846.4340920926296,last_temp:240.3530383373011,temp:240.3530383373011,target_temp:240,smoothed_temp:239.7585374280461 +[2026-05-03 08:16:21.872] [info] [gcode_move.cpp:52] [1932] G180 select 818 +[2026-05-03 08:16:21.880] [info] [device_status.cpp:832] [1932] M2202 result_code:1045 +[2026-05-03 08:16:21.881] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:16:21.881] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:16:21.881] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:16:21.882] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:16:21.882] [info] [extruder.cpp:501] [1932] cmd_M104 temp 210 index -1 wait true +[2026-05-03 08:16:21.882] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:210,wait:true +[2026-05-03 08:16:47.898] [info] [device_status.cpp:832] [1932] M2202 result_code:1066 +[2026-05-03 08:16:47.899] [info] [heaters.cpp:1198] [1932] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 210 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 08:16:48.202] [info] [gcode_move.cpp:52] [1932] G180 select 819 +[2026-05-03 08:17:04.828] [info] [gcode_move.cpp:52] [1932] G180 select 818 +[2026-05-03 08:17:04.833] [info] [mmu.cpp:4633] [1932] M6211 over. complete +[2026-05-03 08:17:13.204] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:17:25.432] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:47 +[2026-05-03 08:17:37.651] [info] [gcode.cpp:1051] [1932] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 08:17:37.651] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = false +[2026-05-03 08:17:37.652] [info] [gcode_move.cpp:638] [1932] cmd_M220 speed 500 speed_factor 0.016666666666666666 100 +[2026-05-03 08:17:38.033] [info] [gcode.cpp:559] [1932] Unknown command: T0 +[2026-05-03 08:17:38.034] [info] [mmu.cpp:4520] [1932] M6211 start +[2026-05-03 08:17:38.034] [info] [mmu.cpp:4540] [1932] M6211 printable_height 256 T 0 A false K 75 L 62.1965 M 523 N 523 I 0 J 179 P 5000 Q 210 S 210 R 240 C 2 D 2 +[2026-05-03 08:17:38.034] [info] [mmu.cpp:3705] [1932] get_T_channel channel 0 +[2026-05-03 08:17:38.035] [info] [mmu.cpp:4556] [1932] M6211 z_move 12.426905297101863 accel 10000 +[2026-05-03 08:17:38.039] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:17:38.040] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:17:38.040] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:17:38.040] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:17:38.040] [info] [extruder.cpp:501] [1932] cmd_M104 temp 210 index -1 wait false +[2026-05-03 08:17:38.040] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:210,wait:false +[2026-05-03 08:17:38.041] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:17:38.041] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:17:38.041] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:17:38.042] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:17:38.042] [info] [extruder.cpp:501] [1932] cmd_M104 temp 240 index -1 wait false +[2026-05-03 08:17:38.042] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:240,wait:false +[2026-05-03 08:17:38.043] [info] [mmu.cpp:3985] [1932] Execute filament switch process, retry:0 +[2026-05-03 08:17:38.043] [info] [mmu.cpp:3988] [1932] T: 0 +[2026-05-03 08:17:38.043] [info] [mmu.cpp:3705] [1932] get_T_channel channel 0 +[2026-05-03 08:17:38.043] [info] [mmu.cpp:3998] [1932] CMD_canvas_switch_filament channel 0 fila_in[channel] 1 ex_fila_status 1 +[2026-05-03 08:17:38.043] [info] [mmu.cpp:2493] [1932] start extrude channel check. +[2026-05-03 08:17:38.043] [info] [mmu.cpp:2502] [1932] extrude channel check result: 1 ex_fila_status:1 +[2026-05-03 08:17:38.043] [info] [mmu.cpp:4204] [1932] Execute cutting action +[2026-05-03 08:17:38.044] [info] [homing_override.cpp:238] [1932] need true true false homed true true true +[2026-05-03 08:17:38.044] [info] [gcode_move.cpp:52] [1932] G180 select 813 +[2026-05-03 08:17:39.030] [info] [verify_heater.cpp:164] [1932] Heater extruder approaching new target of 240 +[2026-05-03 08:17:43.361] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"1"} +[2026-05-03 08:17:43.362] [info] [cutting_switch_sensor.cpp:103] [1932] cutting detect state:true +[2026-05-03 08:17:43.937] [info] [gcode_move.cpp:52] [1932] G180 select 815 +[2026-05-03 08:17:44.747] [info] [gcode_move.cpp:52] [1932] G180 select 800 +[2026-05-03 08:17:44.748] [info] [gcode.cpp:957] [1932] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=226.06438924005278 +[2026-05-03 08:17:44.748] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = true +[2026-05-03 08:17:44.749] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:17:45.167] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"0"} +[2026-05-03 08:17:45.170] [info] [cutting_switch_sensor.cpp:103] [1932] cutting detect state:false +[2026-05-03 08:17:47.434] [info] [gcode_move.cpp:52] [1932] G180 select 816 +[2026-05-03 08:17:49.036] [info] [verify_heater.cpp:140] [1932] Heater extruder within range of 240 +[2026-05-03 08:17:49.351] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:17:50.352] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir -1 channel: 1 +[2026-05-03 08:17:50.353] [info] [mmu.cpp:4235] [1932] Execute cutting action. complete +[2026-05-03 08:17:50.354] [info] [mmu.cpp:4256] [1932] Execute extruder head filament plug out. channel: 1 +[2026-05-03 08:17:50.354] [info] [mmu.cpp:2206] [1932] status[channel] 2 fila_in[channel] 1 +[2026-05-03 08:17:50.354] [info] [mmu.cpp:2246] [1932] clean_waste __OVER +[2026-05-03 08:17:50.355] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:17:51.356] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir -1 channel: 1 +[2026-05-03 08:17:52.270] [info] [mmu.cpp:2266] [1932] retract last_pos_1 channel: 1 ch_1: 1757.0927711527715 ch_2: 1414.5335082053402 ch_3: 0 ch_4: 0 +[2026-05-03 08:17:52.772] [info] [filament_switch_sensor.cpp:332] [1932] _button_handler switch_fila_det false +[2026-05-03 08:17:52.773] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"0"} +[2026-05-03 08:17:54.284] [info] [mmu.cpp:2289] [1932] ex_fila_status 0 channel 1 pre_pos 1414.5335082053402 cur_pos 1511.9857123196957 +[2026-05-03 08:17:54.284] [info] [mmu.cpp:2296] [1932] retract cur_pos_1 channel: 1 ch_1: 1757.0927711527715 ch_2: 1511.9857123196957 ch_3: 0 ch_4: 0 +[2026-05-03 08:17:54.284] [info] [mmu.cpp:4306] [1932] Execute extruder head filament plug out complete, channel: 1 +[2026-05-03 08:17:54.285] [info] [mmu.cpp:4330] [1932] Execute filament plug in process. channel: 0 +[2026-05-03 08:17:54.285] [info] [mmu.cpp:2859] [1932] exec auto refill filament start, befor_channel 0 ex_fila_status 0 canvas_status 1 +[2026-05-03 08:17:54.285] [info] [mmu.cpp:2911] [1932] exec auto refill filament over, after_channel 0 ex_fila_status 0 canvas_status 1 +[2026-05-03 08:17:54.286] [info] [mmu.cpp:2356] [1932] feed last_pos_1 channel: 0 ch_1: 1757.0927711527715 ch_2: 1511.9857123196957 ch_3: 0 ch_4: 0 +[2026-05-03 08:17:57.429] [info] [filament_switch_sensor.cpp:332] [1932] _button_handler switch_fila_det true +[2026-05-03 08:17:57.430] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-03 08:17:58.421] [info] [mmu.cpp:2395] [1932] feed last_pos_2 channel: 0 ch_1: 1866.3573636446242 ch_2: 1511.9857123196957 ch_3: 0 ch_4: 0 +[2026-05-03 08:17:58.421] [info] [gcode_move.cpp:52] [1932] G180 select 820 +[2026-05-03 08:18:02.766] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:18:03.766] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir 1 channel: 0 +[2026-05-03 08:18:03.766] [info] [mmu.cpp:2400] [1932] retry_count 1 last_position 1866.3573636446242 ch_position 1872.2635578333732 +[2026-05-03 08:18:03.767] [info] [mmu.cpp:2406] [1932] feed cur_pos_2 channel: 0 ch_1: 1872.2635578333732 ch_2: 1511.9857123196957 ch_3: 0 ch_4: 0 +[2026-05-03 08:18:03.767] [info] [gcode_move.cpp:52] [1932] G180 select 820 +[2026-05-03 08:18:07.419] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:963.27800000038,last_temp:59.83719676507104,temp:59.83719676507104,target_temp:60,smoothed_temp:59.8308082881892 +[2026-05-03 08:18:08.103] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:18:09.105] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir 1 channel: 0 +[2026-05-03 08:18:09.105] [info] [mmu.cpp:2400] [1932] retry_count 2 last_position 1866.3573636446242 ch_position 1881.1228491164961 +[2026-05-03 08:18:09.105] [info] [mmu.cpp:2406] [1932] feed cur_pos_2 channel: 0 ch_1: 1881.1228491164961 ch_2: 1511.9857123196957 ch_3: 0 ch_4: 0 +[2026-05-03 08:18:09.105] [info] [mmu.cpp:2423] [1932] extruder_feed success, channel = 0 +[2026-05-03 08:18:09.105] [info] [mmu.cpp:4340] [1932] Execute filament plug in process complete. channel: 0 +[2026-05-03 08:18:09.105] [info] [mmu.cpp:4752] [1932] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 08:18:09.105] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1210 error_level 3 +[2026-05-03 08:18:09.107] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1211 error_level 3 +[2026-05-03 08:18:09.107] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1220 error_level 3 +[2026-05-03 08:18:09.108] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1231 error_level 3 +[2026-05-03 08:18:09.108] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1232 error_level 3 +[2026-05-03 08:18:09.109] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1241 error_level 3 +[2026-05-03 08:18:09.109] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1242 error_level 3 +[2026-05-03 08:18:09.109] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1243 error_level 3 +[2026-05-03 08:18:09.110] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1251 error_level 3 +[2026-05-03 08:18:09.111] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1252 error_level 3 +[2026-05-03 08:18:09.111] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1265 error_level 3 +[2026-05-03 08:18:09.111] [info] [mmu.cpp:4747] [1932] clear_abnormal_feedback #1 __OVER +[2026-05-03 08:18:09.112] [info] [mmu.cpp:4017] [1932] Execute filament switch process complete, channel 0 +[2026-05-03 08:18:09.114] [info] [mmu.cpp:4604] [1932] M6211 flush_times 1 flush_length_actual 47.1965 +[2026-05-03 08:18:09.115] [info] [device_status.cpp:832] [1932] M2202 result_code:1045 +[2026-05-03 08:18:09.116] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:18:09.116] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:18:09.116] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:18:09.117] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:18:09.117] [info] [extruder.cpp:501] [1932] cmd_M104 temp 210 index -1 wait true +[2026-05-03 08:18:09.117] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:210,wait:true +[2026-05-03 08:18:10.578] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:966.4363990797267,last_temp:239.77411945740175,temp:239.77411945740175,target_temp:210,smoothed_temp:240.28661835396198 +[2026-05-03 08:18:33.130] [info] [device_status.cpp:832] [1932] M2202 result_code:1066 +[2026-05-03 08:18:33.132] [info] [heaters.cpp:1198] [1932] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 210 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 08:18:33.436] [info] [gcode_move.cpp:52] [1932] G180 select 819 +[2026-05-03 08:18:50.046] [info] [gcode_move.cpp:52] [1932] G180 select 818 +[2026-05-03 08:18:50.051] [info] [mmu.cpp:4633] [1932] M6211 over. complete +[2026-05-03 08:18:58.418] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:18:58.843] [info] [clocksync.cpp:212] [1984] mcu 'mcu': Ignoring clock sample: sent_time=1040.607400121,time_avg=1011.0685849239067,freq=23999996.904492475,diff=17918.816284179688(0.0007466173451741537),stddev=441.7729672141938 +[2026-05-03 08:20:06.664] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:48 +[2026-05-03 08:20:07.918] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:1083.77800000038,last_temp:59.72962567717195,temp:59.72962567717195,target_temp:60,smoothed_temp:59.77980011291666 +[2026-05-03 08:20:10.579] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:1086.4386717491448,last_temp:212.58257733722132,temp:212.58257733722132,target_temp:210,smoothed_temp:211.6090481328214 +[2026-05-03 08:20:21.416] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:20:42.299] [info] [clocksync.cpp:212] [1989] mcu 'toolhead': Ignoring clock sample: sent_time=1144.06248742,time_avg=1114.5024096897425,freq=119997704.68127471,diff=107594.19659423828(0.0008966183049519857),stddev=3624.1131948391085 +[2026-05-03 08:20:47.023] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:21:28.011] [info] [gcode.cpp:1051] [1932] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 08:21:28.011] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = false +[2026-05-03 08:21:28.013] [info] [gcode_move.cpp:638] [1932] cmd_M220 speed 500 speed_factor 0.016666666666666666 100 +[2026-05-03 08:21:28.276] [info] [gcode.cpp:559] [1932] Unknown command: T1 +[2026-05-03 08:21:28.277] [info] [mmu.cpp:4520] [1932] M6211 start +[2026-05-03 08:21:28.278] [info] [mmu.cpp:4540] [1932] M6211 printable_height 256 T 1 A false K 75 L 221.845 M 523 N 523 I 0 J 179 P 5000 Q 210 S 210 R 240 C 2 D 2 +[2026-05-03 08:21:28.278] [info] [mmu.cpp:3705] [1932] get_T_channel channel 1 +[2026-05-03 08:21:28.278] [info] [mmu.cpp:4556] [1932] M6211 z_move 12.626905297101862 accel 10000 +[2026-05-03 08:21:28.284] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:21:28.284] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:21:28.284] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:21:28.285] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:21:28.285] [info] [extruder.cpp:501] [1932] cmd_M104 temp 210 index -1 wait false +[2026-05-03 08:21:28.285] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:210,wait:false +[2026-05-03 08:21:28.286] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:21:28.286] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:21:28.286] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:21:28.286] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:21:28.287] [info] [extruder.cpp:501] [1932] cmd_M104 temp 240 index -1 wait false +[2026-05-03 08:21:28.287] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:240,wait:false +[2026-05-03 08:21:28.288] [info] [mmu.cpp:3985] [1932] Execute filament switch process, retry:0 +[2026-05-03 08:21:28.288] [info] [mmu.cpp:3988] [1932] T: 1 +[2026-05-03 08:21:28.288] [info] [mmu.cpp:3705] [1932] get_T_channel channel 1 +[2026-05-03 08:21:28.288] [info] [mmu.cpp:3998] [1932] CMD_canvas_switch_filament channel 1 fila_in[channel] 1 ex_fila_status 1 +[2026-05-03 08:21:28.288] [info] [mmu.cpp:2493] [1932] start extrude channel check. +[2026-05-03 08:21:28.288] [info] [mmu.cpp:2502] [1932] extrude channel check result: 0 ex_fila_status:1 +[2026-05-03 08:21:28.289] [info] [mmu.cpp:4204] [1932] Execute cutting action +[2026-05-03 08:21:28.289] [info] [homing_override.cpp:238] [1932] need true true false homed true true true +[2026-05-03 08:21:28.290] [info] [gcode_move.cpp:52] [1932] G180 select 813 +[2026-05-03 08:21:28.325] [info] [verify_heater.cpp:164] [1932] Heater extruder approaching new target of 240 +[2026-05-03 08:21:33.588] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"1"} +[2026-05-03 08:21:33.590] [info] [cutting_switch_sensor.cpp:103] [1932] cutting detect state:true +[2026-05-03 08:21:34.277] [info] [gcode_move.cpp:52] [1932] G180 select 815 +[2026-05-03 08:21:35.088] [info] [gcode_move.cpp:52] [1932] G180 select 800 +[2026-05-03 08:21:35.089] [info] [gcode.cpp:957] [1932] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=222.4683458859284 +[2026-05-03 08:21:35.089] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = true +[2026-05-03 08:21:35.089] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:21:35.500] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"0"} +[2026-05-03 08:21:35.502] [info] [cutting_switch_sensor.cpp:103] [1932] cutting detect state:false +[2026-05-03 08:21:37.769] [info] [gcode_move.cpp:52] [1932] G180 select 816 +[2026-05-03 08:21:39.688] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:21:40.331] [info] [verify_heater.cpp:140] [1932] Heater extruder within range of 240 +[2026-05-03 08:21:40.688] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir -1 channel: 0 +[2026-05-03 08:21:40.688] [info] [mmu.cpp:4235] [1932] Execute cutting action. complete +[2026-05-03 08:21:40.689] [info] [mmu.cpp:4256] [1932] Execute extruder head filament plug out. channel: 0 +[2026-05-03 08:21:40.689] [info] [mmu.cpp:2206] [1932] status[channel] 2 fila_in[channel] 1 +[2026-05-03 08:21:40.689] [info] [mmu.cpp:2246] [1932] clean_waste __OVER +[2026-05-03 08:21:40.690] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:21:41.690] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir -1 channel: 0 +[2026-05-03 08:21:42.607] [info] [mmu.cpp:2266] [1932] retract last_pos_1 channel: 0 ch_1: 2427.4458115757616 ch_2: 1511.9857123196957 ch_3: 0 ch_4: 0 +[2026-05-03 08:21:43.102] [info] [filament_switch_sensor.cpp:332] [1932] _button_handler switch_fila_det false +[2026-05-03 08:21:43.102] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"0"} +[2026-05-03 08:21:44.539] [info] [mmu.cpp:2289] [1932] ex_fila_status 0 channel 0 pre_pos 2427.4458115757616 cur_pos 2521.9449185957424 +[2026-05-03 08:21:44.539] [info] [mmu.cpp:2296] [1932] retract cur_pos_1 channel: 0 ch_1: 2521.9449185957424 ch_2: 1511.9857123196957 ch_3: 0 ch_4: 0 +[2026-05-03 08:21:44.540] [info] [mmu.cpp:4306] [1932] Execute extruder head filament plug out complete, channel: 0 +[2026-05-03 08:21:44.540] [info] [mmu.cpp:4330] [1932] Execute filament plug in process. channel: 1 +[2026-05-03 08:21:44.540] [info] [mmu.cpp:2859] [1932] exec auto refill filament start, befor_channel 1 ex_fila_status 0 canvas_status 1 +[2026-05-03 08:21:44.540] [info] [mmu.cpp:2911] [1932] exec auto refill filament over, after_channel 1 ex_fila_status 0 canvas_status 1 +[2026-05-03 08:21:44.541] [info] [mmu.cpp:2356] [1932] feed last_pos_1 channel: 1 ch_1: 2521.9449185957424 ch_2: 1511.9857123196957 ch_3: 0 ch_4: 0 +[2026-05-03 08:21:47.576] [info] [filament_switch_sensor.cpp:332] [1932] _button_handler switch_fila_det true +[2026-05-03 08:21:47.576] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-03 08:21:48.787] [info] [mmu.cpp:2395] [1932] feed last_pos_2 channel: 1 ch_1: 2521.9449185957424 ch_2: 1615.3441106228 ch_3: 0 ch_4: 0 +[2026-05-03 08:21:48.788] [info] [gcode_move.cpp:52] [1932] G180 select 820 +[2026-05-03 08:21:53.122] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:21:54.123] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir 1 channel: 1 +[2026-05-03 08:21:54.124] [info] [mmu.cpp:2400] [1932] retry_count 1 last_position 1615.3441106228 ch_position 1621.2503048115489 +[2026-05-03 08:21:54.124] [info] [mmu.cpp:2406] [1932] feed cur_pos_2 channel: 1 ch_1: 2521.9449185957424 ch_2: 1621.2503048115489 ch_3: 0 ch_4: 0 +[2026-05-03 08:21:54.124] [info] [gcode_move.cpp:52] [1932] G180 select 820 +[2026-05-03 08:21:58.459] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:21:59.460] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir 1 channel: 1 +[2026-05-03 08:21:59.460] [info] [mmu.cpp:2400] [1932] retry_count 2 last_position 1615.3441106228 ch_position 1633.062693189046 +[2026-05-03 08:21:59.460] [info] [mmu.cpp:2406] [1932] feed cur_pos_2 channel: 1 ch_1: 2521.9449185957424 ch_2: 1633.062693189046 ch_3: 0 ch_4: 0 +[2026-05-03 08:21:59.460] [info] [mmu.cpp:2423] [1932] extruder_feed success, channel = 1 +[2026-05-03 08:21:59.460] [info] [mmu.cpp:4340] [1932] Execute filament plug in process complete. channel: 1 +[2026-05-03 08:21:59.460] [info] [mmu.cpp:4752] [1932] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 08:21:59.460] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1210 error_level 3 +[2026-05-03 08:21:59.462] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1211 error_level 3 +[2026-05-03 08:21:59.462] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1220 error_level 3 +[2026-05-03 08:21:59.462] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1231 error_level 3 +[2026-05-03 08:21:59.463] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1232 error_level 3 +[2026-05-03 08:21:59.463] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1241 error_level 3 +[2026-05-03 08:21:59.463] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1242 error_level 3 +[2026-05-03 08:21:59.463] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1243 error_level 3 +[2026-05-03 08:21:59.464] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1251 error_level 3 +[2026-05-03 08:21:59.464] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1252 error_level 3 +[2026-05-03 08:21:59.464] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1265 error_level 3 +[2026-05-03 08:21:59.464] [info] [mmu.cpp:4747] [1932] clear_abnormal_feedback #1 __OVER +[2026-05-03 08:21:59.464] [info] [mmu.cpp:4017] [1932] Execute filament switch process complete, channel 1 +[2026-05-03 08:21:59.470] [info] [device_status.cpp:832] [1932] M2202 result_code:1045 +[2026-05-03 08:21:59.471] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:21:59.471] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:21:59.471] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:21:59.472] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:21:59.472] [info] [extruder.cpp:501] [1932] cmd_M104 temp 240 index -1 wait true +[2026-05-03 08:21:59.472] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:240,wait:true +[2026-05-03 08:22:00.473] [info] [device_status.cpp:832] [1932] M2202 result_code:1066 +[2026-05-03 08:22:00.475] [info] [heaters.cpp:1198] [1932] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 240 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 08:22:00.477] [info] [mmu.cpp:4604] [1932] M6211 flush_times 3 flush_length_actual 68.94833333333334 +[2026-05-03 08:22:00.478] [info] [gcode_move.cpp:52] [1932] G180 select 819 +[2026-05-03 08:22:08.418] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:1204.27800000038,last_temp:60.14963681199288,temp:60.14963681199288,target_temp:60,smoothed_temp:60.18018426455876 +[2026-05-03 08:22:10.581] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:1206.4409919552727,last_temp:238.3715314280961,temp:238.3715314280961,target_temp:240,smoothed_temp:238.31126650450724 +[2026-05-03 08:22:17.947] [info] [gcode_move.cpp:52] [1932] G180 select 818 +[2026-05-03 08:22:17.953] [info] [gcode_move.cpp:52] [1932] G180 select 819 +[2026-05-03 08:22:34.983] [info] [gcode_move.cpp:52] [1932] G180 select 818 +[2026-05-03 08:22:34.988] [info] [device_status.cpp:832] [1932] M2202 result_code:1045 +[2026-05-03 08:22:34.989] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:22:34.989] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:22:34.989] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:22:34.990] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:22:34.990] [info] [extruder.cpp:501] [1932] cmd_M104 temp 210 index -1 wait true +[2026-05-03 08:22:34.990] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:210,wait:true +[2026-05-03 08:23:00.007] [info] [device_status.cpp:832] [1932] M2202 result_code:1066 +[2026-05-03 08:23:00.010] [info] [heaters.cpp:1198] [1932] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 210 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 08:23:00.313] [info] [gcode_move.cpp:52] [1932] G180 select 819 +[2026-05-03 08:23:16.943] [info] [gcode_move.cpp:52] [1932] G180 select 818 +[2026-05-03 08:23:16.947] [info] [mmu.cpp:4633] [1932] M6211 over. complete +[2026-05-03 08:23:25.317] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:23:50.273] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:49 +[2026-05-03 08:23:50.274] [info] [gcode.cpp:1051] [1932] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 08:23:50.274] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = false +[2026-05-03 08:23:51.173] [info] [gcode_move.cpp:638] [1932] cmd_M220 speed 30 speed_factor 0.016666666666666666 100 +[2026-05-03 08:23:51.523] [info] [gcode.cpp:559] [1932] Unknown command: T0 +[2026-05-03 08:23:51.525] [info] [mmu.cpp:4520] [1932] M6211 start +[2026-05-03 08:23:51.525] [info] [mmu.cpp:4540] [1932] M6211 printable_height 256 T 0 A false K 75 L 62.1965 M 523 N 523 I 0 J 179 P 5000 Q 210 S 210 R 240 C 2 D 2 +[2026-05-03 08:23:51.525] [info] [mmu.cpp:3705] [1932] get_T_channel channel 0 +[2026-05-03 08:23:51.526] [info] [mmu.cpp:4556] [1932] M6211 z_move 12.826905297101863 accel 5000 +[2026-05-03 08:23:51.530] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:23:51.530] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:23:51.530] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:23:51.531] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:23:51.531] [info] [extruder.cpp:501] [1932] cmd_M104 temp 210 index -1 wait false +[2026-05-03 08:23:51.531] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:210,wait:false +[2026-05-03 08:23:51.532] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:23:51.532] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:23:51.532] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:23:51.533] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:23:51.533] [info] [extruder.cpp:501] [1932] cmd_M104 temp 240 index -1 wait false +[2026-05-03 08:23:51.533] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:240,wait:false +[2026-05-03 08:23:51.534] [info] [mmu.cpp:3985] [1932] Execute filament switch process, retry:0 +[2026-05-03 08:23:51.534] [info] [mmu.cpp:3988] [1932] T: 0 +[2026-05-03 08:23:51.534] [info] [mmu.cpp:3705] [1932] get_T_channel channel 0 +[2026-05-03 08:23:51.534] [info] [mmu.cpp:3998] [1932] CMD_canvas_switch_filament channel 0 fila_in[channel] 1 ex_fila_status 1 +[2026-05-03 08:23:51.534] [info] [mmu.cpp:2493] [1932] start extrude channel check. +[2026-05-03 08:23:51.534] [info] [mmu.cpp:2502] [1932] extrude channel check result: 1 ex_fila_status:1 +[2026-05-03 08:23:51.534] [info] [mmu.cpp:4204] [1932] Execute cutting action +[2026-05-03 08:23:51.535] [info] [homing_override.cpp:238] [1932] need true true false homed true true true +[2026-05-03 08:23:51.535] [info] [gcode_move.cpp:52] [1932] G180 select 813 +[2026-05-03 08:23:52.427] [info] [verify_heater.cpp:164] [1932] Heater extruder approaching new target of 240 +[2026-05-03 08:23:56.996] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"1"} +[2026-05-03 08:23:57.001] [info] [cutting_switch_sensor.cpp:103] [1932] cutting detect state:true +[2026-05-03 08:23:57.676] [info] [gcode_move.cpp:52] [1932] G180 select 815 +[2026-05-03 08:23:58.488] [info] [gcode_move.cpp:52] [1932] G180 select 800 +[2026-05-03 08:23:58.489] [info] [gcode.cpp:957] [1932] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=226.45070740462586 +[2026-05-03 08:23:58.489] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = true +[2026-05-03 08:23:58.489] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:23:58.898] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"0"} +[2026-05-03 08:23:58.908] [info] [cutting_switch_sensor.cpp:103] [1932] cutting detect state:false +[2026-05-03 08:24:01.170] [info] [gcode_move.cpp:52] [1932] G180 select 816 +[2026-05-03 08:24:01.432] [info] [verify_heater.cpp:140] [1932] Heater extruder within range of 240 +[2026-05-03 08:24:03.088] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:24:04.089] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir -1 channel: 1 +[2026-05-03 08:24:04.089] [info] [mmu.cpp:4235] [1932] Execute cutting action. complete +[2026-05-03 08:24:04.090] [info] [mmu.cpp:4256] [1932] Execute extruder head filament plug out. channel: 1 +[2026-05-03 08:24:04.090] [info] [mmu.cpp:2206] [1932] status[channel] 2 fila_in[channel] 1 +[2026-05-03 08:24:04.090] [info] [mmu.cpp:2246] [1932] clean_waste __OVER +[2026-05-03 08:24:04.090] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:24:05.091] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir -1 channel: 1 +[2026-05-03 08:24:06.008] [info] [mmu.cpp:2266] [1932] retract last_pos_1 channel: 1 ch_1: 2521.9449185957424 ch_2: 1931.3254997208612 ch_3: 0 ch_4: 0 +[2026-05-03 08:24:06.503] [info] [filament_switch_sensor.cpp:332] [1932] _button_handler switch_fila_det false +[2026-05-03 08:24:06.504] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"0"} +[2026-05-03 08:24:07.945] [info] [mmu.cpp:2289] [1932] ex_fila_status 0 channel 1 pre_pos 1931.3254997208612 cur_pos 2034.6838980239656 +[2026-05-03 08:24:07.945] [info] [mmu.cpp:2296] [1932] retract cur_pos_1 channel: 1 ch_1: 2521.9449185957424 ch_2: 2034.6838980239656 ch_3: 0 ch_4: 0 +[2026-05-03 08:24:07.946] [info] [mmu.cpp:4306] [1932] Execute extruder head filament plug out complete, channel: 1 +[2026-05-03 08:24:07.946] [info] [mmu.cpp:4330] [1932] Execute filament plug in process. channel: 0 +[2026-05-03 08:24:07.946] [info] [mmu.cpp:2859] [1932] exec auto refill filament start, befor_channel 0 ex_fila_status 0 canvas_status 1 +[2026-05-03 08:24:07.946] [info] [mmu.cpp:2911] [1932] exec auto refill filament over, after_channel 0 ex_fila_status 0 canvas_status 1 +[2026-05-03 08:24:07.946] [info] [mmu.cpp:2356] [1932] feed last_pos_1 channel: 0 ch_1: 2521.9449185957424 ch_2: 2034.6838980239656 ch_3: 0 ch_4: 0 +[2026-05-03 08:24:08.917] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:1324.77800000038,last_temp:59.77473330479569,temp:59.77473330479569,target_temp:60,smoothed_temp:59.764793466366 +[2026-05-03 08:24:10.583] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:1326.4432852501361,last_temp:242.0270361785059,temp:242.0270361785059,target_temp:240,smoothed_temp:242.20848989632623 +[2026-05-03 08:24:10.868] [info] [filament_switch_sensor.cpp:332] [1932] _button_handler switch_fila_det true +[2026-05-03 08:24:10.869] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-03 08:24:11.790] [info] [mmu.cpp:2395] [1932] feed last_pos_2 channel: 0 ch_1: 2622.3502198044725 ch_2: 2034.6838980239656 ch_3: 0 ch_4: 0 +[2026-05-03 08:24:11.790] [info] [gcode_move.cpp:52] [1932] G180 select 820 +[2026-05-03 08:24:16.125] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:24:17.127] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir 1 channel: 0 +[2026-05-03 08:24:17.127] [info] [mmu.cpp:2400] [1932] retry_count 1 last_position 2622.3502198044725 ch_position 2628.256413993221 +[2026-05-03 08:24:17.127] [info] [mmu.cpp:2406] [1932] feed cur_pos_2 channel: 0 ch_1: 2628.256413993221 ch_2: 2034.6838980239656 ch_3: 0 ch_4: 0 +[2026-05-03 08:24:17.128] [info] [gcode_move.cpp:52] [1932] G180 select 820 +[2026-05-03 08:24:21.461] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 08:24:22.462] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir 1 channel: 0 +[2026-05-03 08:24:22.463] [info] [mmu.cpp:2400] [1932] retry_count 2 last_position 2622.3502198044725 ch_position 2640.0688023707185 +[2026-05-03 08:24:22.463] [info] [mmu.cpp:2406] [1932] feed cur_pos_2 channel: 0 ch_1: 2640.0688023707185 ch_2: 2034.6838980239656 ch_3: 0 ch_4: 0 +[2026-05-03 08:24:22.463] [info] [mmu.cpp:2423] [1932] extruder_feed success, channel = 0 +[2026-05-03 08:24:22.463] [info] [mmu.cpp:4340] [1932] Execute filament plug in process complete. channel: 0 +[2026-05-03 08:24:22.463] [info] [mmu.cpp:4752] [1932] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 08:24:22.463] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1210 error_level 3 +[2026-05-03 08:24:22.464] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1211 error_level 3 +[2026-05-03 08:24:22.465] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1220 error_level 3 +[2026-05-03 08:24:22.466] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1231 error_level 3 +[2026-05-03 08:24:22.466] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1232 error_level 3 +[2026-05-03 08:24:22.467] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1241 error_level 3 +[2026-05-03 08:24:22.467] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1242 error_level 3 +[2026-05-03 08:24:22.467] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1243 error_level 3 +[2026-05-03 08:24:22.469] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1251 error_level 3 +[2026-05-03 08:24:22.470] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1252 error_level 3 +[2026-05-03 08:24:22.470] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1265 error_level 3 +[2026-05-03 08:24:22.471] [info] [mmu.cpp:4747] [1932] clear_abnormal_feedback #1 __OVER +[2026-05-03 08:24:22.471] [info] [mmu.cpp:4017] [1932] Execute filament switch process complete, channel 0 +[2026-05-03 08:24:22.473] [info] [mmu.cpp:4604] [1932] M6211 flush_times 1 flush_length_actual 47.1965 +[2026-05-03 08:24:22.474] [info] [device_status.cpp:832] [1932] M2202 result_code:1045 +[2026-05-03 08:24:22.475] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:24:22.475] [info] [verify_heater.cpp:67] [1932] verify_heater:reset_fault heater_name extruder +[2026-05-03 08:24:22.475] [info] [gcode.cpp:544] [1932] respond_ecode: Heater extruder not heating at expected rate, error_code: 103 error_level 3 +[2026-05-03 08:24:22.476] [info] [heaters.cpp:312] [1932] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 08:24:22.476] [info] [extruder.cpp:501] [1932] cmd_M104 temp 210 index -1 wait true +[2026-05-03 08:24:22.477] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:210,wait:true +[2026-05-03 08:24:47.491] [info] [device_status.cpp:832] [1932] M2202 result_code:1066 +[2026-05-03 08:24:47.492] [info] [heaters.cpp:1198] [1932] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 210 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 08:24:47.795] [info] [gcode_move.cpp:52] [1932] G180 select 819 +[2026-05-03 08:25:04.419] [info] [gcode_move.cpp:52] [1932] G180 select 818 +[2026-05-03 08:25:04.424] [info] [mmu.cpp:4633] [1932] M6211 over. complete +[2026-05-03 08:25:12.793] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:25:42.322] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:26:09.417] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:1445.27800000038,last_temp:59.89272653087539,temp:59.89272653087539,target_temp:60,smoothed_temp:59.87103811438623 +[2026-05-03 08:26:10.585] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:1446.4455950575443,last_temp:209.78866767359983,temp:209.78866767359983,target_temp:210,smoothed_temp:209.45784928637647 +[2026-05-03 08:26:19.427] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:26:31.505] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:50 +[2026-05-03 08:27:59.357] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:51 +[2026-05-03 08:28:09.917] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:1565.77800000038,last_temp:59.81290448038317,temp:59.81290448038317,target_temp:60,smoothed_temp:59.873508640419516 +[2026-05-03 08:28:10.587] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:1566.4478802923659,last_temp:207.98817830134482,temp:207.98817830134482,target_temp:210,smoothed_temp:208.47611671161354 +[2026-05-03 08:28:14.093] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:52 +[2026-05-03 08:28:27.953] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:53 +[2026-05-03 08:28:42.363] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:54 +[2026-05-03 08:28:56.221] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:55 +[2026-05-03 08:29:10.340] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:56 +[2026-05-03 08:29:24.642] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:57 +[2026-05-03 08:29:38.438] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:58 +[2026-05-03 08:29:51.823] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:59 +[2026-05-03 08:30:06.055] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:60 +[2026-05-03 08:30:10.417] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:1686.27800000038,last_temp:60.00380540444593,temp:60.00380540444593,target_temp:60,smoothed_temp:60.00265786160618 +[2026-05-03 08:30:10.589] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:1686.4501597726926,last_temp:210.0698825080084,temp:210.0698825080084,target_temp:210,smoothed_temp:210.81377212259005 +[2026-05-03 08:30:11.764] [info] [clocksync.cpp:212] [1989] mcu 'toolhead': Ignoring clock sample: sent_time=1713.528831483,time_avg=1683.9390475295445,freq=119997720.90838905,diff=81339.17443847656(0.0006778264536539713),stddev=2172.8350728309797 +[2026-05-03 08:30:19.855] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:61 +[2026-05-03 08:30:21.606] [info] [clocksync.cpp:212] [1989] mcu 'toolhead': Ignoring clock sample: sent_time=1723.3711713629998,time_avg=1693.0717733359274,freq=119997718.25226648,diff=89815.18936157227(0.0007484599113464355),stddev=2562.7793155526197 +[2026-05-03 08:30:33.062] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:62 +[2026-05-03 08:30:46.247] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:63 +[2026-05-03 08:31:00.443] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:64 +[2026-05-03 08:31:13.622] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:65 +[2026-05-03 08:31:14.884] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:31:26.749] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:66 +[2026-05-03 08:31:38.511] [info] [clocksync.cpp:199] [1987] mcu 'bed_sensor': New minimum RTT: sent_time=1800.277814108,half_rtt=0.00016502050004874036,freq=119998144.49753657 +[2026-05-03 08:31:40.988] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:67 +[2026-05-03 08:31:53.318] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:68 +[2026-05-03 08:32:06.350] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:69 +[2026-05-03 08:32:10.591] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:1806.4524575179585,last_temp:212.45310070491274,temp:212.45310070491274,target_temp:210,smoothed_temp:212.38609580085873 +[2026-05-03 08:32:10.916] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:1806.77800000038,last_temp:59.96909044880243,temp:59.96909044880243,target_temp:60,smoothed_temp:59.97740254209899 +[2026-05-03 08:32:20.523] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:70 +[2026-05-03 08:32:28.417] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:32:33.130] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:71 +[2026-05-03 08:32:46.909] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:72 +[2026-05-03 08:33:00.775] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:73 +[2026-05-03 08:33:13.272] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:74 +[2026-05-03 08:33:17.136] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:33:26.314] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:75 +[2026-05-03 08:33:39.917] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:76 +[2026-05-03 08:33:52.864] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:77 +[2026-05-03 08:34:05.851] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:78 +[2026-05-03 08:34:10.593] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:1926.454761465992,last_temp:212.40609127625265,temp:212.40609127625265,target_temp:210,smoothed_temp:211.52935067657492 +[2026-05-03 08:34:11.416] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:1927.27800000038,last_temp:59.97950466514857,temp:59.97950466514857,target_temp:60,smoothed_temp:59.99289314662897 +[2026-05-03 08:34:19.939] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:79 +[2026-05-03 08:34:32.715] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:80 +[2026-05-03 08:34:45.829] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:81 +[2026-05-03 08:35:00.538] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:82 +[2026-05-03 08:35:14.322] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:83 +[2026-05-03 08:35:28.423] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:84 +[2026-05-03 08:35:41.937] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:85 +[2026-05-03 08:35:55.502] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:86 +[2026-05-03 08:36:08.946] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:87 +[2026-05-03 08:36:10.595] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:2046.4570294237121,last_temp:209.9684860145481,temp:209.9684860145481,target_temp:210,smoothed_temp:209.4267491674434 +[2026-05-03 08:36:11.916] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:2047.77800000038,last_temp:59.92049381095251,temp:59.92049381095251,target_temp:60,smoothed_temp:59.958328791829736 +[2026-05-03 08:36:22.452] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:88 +[2026-05-03 08:36:35.384] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:89 +[2026-05-03 08:36:49.104] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:90 +[2026-05-03 08:36:56.858] [info] [clocksync.cpp:199] [1984] mcu 'mcu': New minimum RTT: sent_time=2118.625081135,half_rtt=7.08749998921121e-05,freq=23999998.725076932 +[2026-05-03 08:37:02.255] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:91 +[2026-05-03 08:37:15.383] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:92 +[2026-05-03 08:37:18.537] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:37:26.822] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:37:28.982] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:93 +[2026-05-03 08:37:41.890] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:94 +[2026-05-03 08:37:54.849] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:95 +[2026-05-03 08:38:08.743] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:96 +[2026-05-03 08:38:10.597] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:2166.459338667588,last_temp:208.44674111470687,temp:208.44674111470687,target_temp:210,smoothed_temp:208.84860900314953 +[2026-05-03 08:38:12.416] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:2168.27800000038,last_temp:60.00727704201341,temp:60.00727704201341,target_temp:60,smoothed_temp:60.00918635385614 +[2026-05-03 08:38:22.100] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:97 +[2026-05-03 08:38:36.631] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:98 +[2026-05-03 08:38:50.728] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:99 +[2026-05-03 08:39:00.500] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:39:05.048] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:100 +[2026-05-03 08:39:14.835] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:39:19.261] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:101 +[2026-05-03 08:39:35.836] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:102 +[2026-05-03 08:39:48.112] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:39:52.502] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:103 +[2026-05-03 08:40:09.390] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:104 +[2026-05-03 08:40:10.599] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:2286.461625677007,last_temp:209.38612763200308,temp:209.38612763200308,target_temp:210,smoothed_temp:210.18323391148672 +[2026-05-03 08:40:12.915] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:2288.77800000038,last_temp:60.01074870550684,temp:60.01074870550684,target_temp:60,smoothed_temp:60.0189588007852 +[2026-05-03 08:40:25.807] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:105 +[2026-05-03 08:40:40.967] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:106 +[2026-05-03 08:40:53.411] [info] [clocksync.cpp:199] [1987] mcu 'bed_sensor': New minimum RTT: sent_time=2355.178951622,half_rtt=0.0001586670000506274,freq=119998167.290805 +[2026-05-03 08:40:57.920] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:107 +[2026-05-03 08:41:26.659] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:108 +[2026-05-03 08:41:45.910] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:109 +[2026-05-03 08:42:01.358] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:42:05.355] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:42:05.857] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:110 +[2026-05-03 08:42:10.601] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:2406.463942676916,last_temp:211.58964893946057,temp:211.58964893946057,target_temp:210,smoothed_temp:211.94814331768967 +[2026-05-03 08:42:13.415] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:2409.27800000038,last_temp:60.069770977512576,temp:60.069770977512576,target_temp:60,smoothed_temp:60.03385621989971 +[2026-05-03 08:42:20.790] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:42:25.606] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:111 +[2026-05-03 08:42:43.405] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:112 +[2026-05-03 08:42:53.880] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:113 +[2026-05-03 08:43:03.510] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:114 +[2026-05-03 08:43:13.113] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:115 +[2026-05-03 08:43:18.917] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:43:22.957] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:116 +[2026-05-03 08:43:32.887] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:117 +[2026-05-03 08:43:42.247] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:118 +[2026-05-03 08:43:51.919] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:119 +[2026-05-03 08:44:02.032] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:120 +[2026-05-03 08:44:10.603] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:2526.466250015226,last_temp:212.6179403703586,temp:212.6179403703586,target_temp:210,smoothed_temp:212.15543898952933 +[2026-05-03 08:44:11.457] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:121 +[2026-05-03 08:44:13.915] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:2529.77800000038,last_temp:60.041994848032346,temp:60.041994848032346,target_temp:60,smoothed_temp:60.02748158014206 +[2026-05-03 08:44:21.142] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:122 +[2026-05-03 08:44:30.576] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:44:31.132] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:123 +[2026-05-03 08:44:35.624] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:44:40.607] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:124 +[2026-05-03 08:44:50.495] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:125 +[2026-05-03 08:44:59.753] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:126 +[2026-05-03 08:45:07.781] [info] [clocksync.cpp:212] [1989] mcu 'toolhead': Ignoring clock sample: sent_time=2609.548157869,time_avg=2579.990361755229,freq=119997697.6470332,diff=76737.45361328125(0.0006394787801106771),stddev=4984.359466831633 +[2026-05-03 08:45:09.822] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:127 +[2026-05-03 08:45:19.704] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:128 +[2026-05-03 08:45:19.740] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:45:29.337] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:129 +[2026-05-03 08:45:39.361] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:130 +[2026-05-03 08:45:49.277] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:131 +[2026-05-03 08:45:59.525] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:132 +[2026-05-03 08:46:08.992] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:133 +[2026-05-03 08:46:10.606] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:2646.4685432092724,last_temp:211.33545024384546,temp:211.33545024384546,target_temp:210,smoothed_temp:210.48368971106734 +[2026-05-03 08:46:14.415] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:2650.27800000038,last_temp:60.01074870550684,temp:60.01074870550684,target_temp:60,smoothed_temp:59.97705611993023 +[2026-05-03 08:46:17.727] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:134 +[2026-05-03 08:46:26.976] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:135 +[2026-05-03 08:46:36.488] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:136 +[2026-05-03 08:46:45.271] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:137 +[2026-05-03 08:46:54.647] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:138 +[2026-05-03 08:47:03.613] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:139 +[2026-05-03 08:47:12.902] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:140 +[2026-05-03 08:47:13.976] [info] [clocksync.cpp:199] [1984] mcu 'mcu': New minimum RTT: sent_time=2735.744786887,half_rtt=7.029200014585513e-05,freq=24000000.53516561 +[2026-05-03 08:47:22.384] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:141 +[2026-05-03 08:47:31.352] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:142 +[2026-05-03 08:47:41.193] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:143 +[2026-05-03 08:47:50.153] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:144 +[2026-05-03 08:47:59.103] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:145 +[2026-05-03 08:48:08.490] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:146 +[2026-05-03 08:48:10.608] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:2766.470867508057,last_temp:209.43071499613478,temp:209.43071499613478,target_temp:210,smoothed_temp:209.0833508166503 +[2026-05-03 08:48:14.914] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:2770.77800000038,last_temp:60.06282678722994,temp:60.06282678722994,target_temp:60,smoothed_temp:60.05406781829011 +[2026-05-03 08:48:17.494] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:147 +[2026-05-03 08:48:26.226] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:148 +[2026-05-03 08:48:34.680] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:149 +[2026-05-03 08:48:43.502] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:150 +[2026-05-03 08:48:52.225] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:151 +[2026-05-03 08:48:56.112] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:49:00.462] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:152 +[2026-05-03 08:49:09.668] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:153 +[2026-05-03 08:49:15.131] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:49:18.069] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:154 +[2026-05-03 08:49:26.232] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:155 +[2026-05-03 08:49:35.431] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:156 +[2026-05-03 08:49:43.687] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:157 +[2026-05-03 08:49:51.979] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:158 +[2026-05-03 08:49:53.599] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:50:00.934] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:159 +[2026-05-03 08:50:09.135] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:160 +[2026-05-03 08:50:10.610] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:2886.4731834920194,last_temp:208.41386518905165,temp:208.41386518905165,target_temp:210,smoothed_temp:208.92949631529945 +[2026-05-03 08:50:15.414] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:2891.27800000038,last_temp:59.962147766105886,temp:59.962147766105886,target_temp:60,smoothed_temp:59.96865121844508 +[2026-05-03 08:50:17.482] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:161 +[2026-05-03 08:50:26.152] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:162 +[2026-05-03 08:50:34.361] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:163 +[2026-05-03 08:50:43.027] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:164 +[2026-05-03 08:50:51.689] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:165 +[2026-05-03 08:50:59.966] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:166 +[2026-05-03 08:51:08.615] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:167 +[2026-05-03 08:51:16.418] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=2978.187339044,half_rtt=0.0002507295000668819,freq=119997666.12353753 +[2026-05-03 08:51:16.686] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:168 +[2026-05-03 08:51:25.403] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:169 +[2026-05-03 08:51:33.920] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:170 +[2026-05-03 08:51:41.977] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:171 +[2026-05-03 08:51:50.428] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:172 +[2026-05-03 08:51:58.446] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:173 +[2026-05-03 08:52:06.963] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:174 +[2026-05-03 08:52:10.612] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:3006.47555102308,last_temp:210.04733443014857,temp:210.04733443014857,target_temp:210,smoothed_temp:210.8311388747116 +[2026-05-03 08:52:15.390] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:175 +[2026-05-03 08:52:15.535] [info] [clocksync.cpp:212] [1989] mcu 'toolhead': Ignoring clock sample: sent_time=3037.302639948,time_avg=3007.7406086676283,freq=119997681.48663187,diff=77610.42108154297(0.000646753509012858),stddev=2201.7211400050924 +[2026-05-03 08:52:15.914] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:3011.77800000038,last_temp:59.91008089223817,temp:59.91008089223817,target_temp:60,smoothed_temp:59.90267005454879 +[2026-05-03 08:52:20.696] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:52:23.289] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:176 +[2026-05-03 08:52:31.760] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:177 +[2026-05-03 08:52:39.684] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:178 +[2026-05-03 08:52:39.727] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:52:48.146] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:179 +[2026-05-03 08:52:56.566] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:180 +[2026-05-03 08:53:04.299] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:181 +[2026-05-03 08:53:12.548] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:182 +[2026-05-03 08:53:20.910] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:183 +[2026-05-03 08:53:28.838] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:184 +[2026-05-03 08:53:37.170] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:185 +[2026-05-03 08:53:44.218] [info] [clocksync.cpp:199] [1984] mcu 'mcu': New minimum RTT: sent_time=3125.986184907,half_rtt=6.910399997650529e-05,freq=23999997.804141216 +[2026-05-03 08:53:45.548] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:186 +[2026-05-03 08:53:51.134] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:53:53.371] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:187 +[2026-05-03 08:54:01.534] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:188 +[2026-05-03 08:54:09.888] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:189 +[2026-05-03 08:54:10.616] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:3126.477836634869,last_temp:211.46240795388468,temp:211.46240795388468,target_temp:210,smoothed_temp:211.7938807830114 +[2026-05-03 08:54:12.814] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=3154.5804201290002,half_rtt=0.00025087499989240314,freq=119997672.74770509 +[2026-05-03 08:54:16.416] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:3132.27800000038,last_temp:60.00380540444593,temp:60.00380540444593,target_temp:60,smoothed_temp:60.01564155094138 +[2026-05-03 08:54:17.580] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:190 +[2026-05-03 08:54:25.636] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:191 +[2026-05-03 08:54:33.984] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:192 +[2026-05-03 08:54:39.272] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:54:41.761] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:193 +[2026-05-03 08:54:49.878] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:194 +[2026-05-03 08:54:57.281] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:195 +[2026-05-03 08:55:05.418] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:196 +[2026-05-03 08:55:13.397] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:197 +[2026-05-03 08:55:21.262] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:198 +[2026-05-03 08:55:28.449] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:199 +[2026-05-03 08:55:36.802] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:200 +[2026-05-03 08:55:44.739] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:201 +[2026-05-03 08:55:52.953] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:202 +[2026-05-03 08:56:00.693] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:203 +[2026-05-03 08:56:09.096] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:204 +[2026-05-03 08:56:10.620] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:3246.4801708400737,last_temp:212.054753069347,temp:212.054753069347,target_temp:210,smoothed_temp:211.44123766173306 +[2026-05-03 08:56:16.819] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:205 +[2026-05-03 08:56:16.917] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:3252.77800000038,last_temp:59.99339064703099,temp:59.99339064703099,target_temp:60,smoothed_temp:59.957777109194524 +[2026-05-03 08:56:17.172] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=3278.938242271,half_rtt=0.0002510000001620938,freq=119997667.19839178 +[2026-05-03 08:56:24.835] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:206 +[2026-05-03 08:56:33.088] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:207 +[2026-05-03 08:56:40.781] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:208 +[2026-05-03 08:56:48.719] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:209 +[2026-05-03 08:56:57.226] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:210 +[2026-05-03 08:57:04.444] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:211 +[2026-05-03 08:57:12.856] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:212 +[2026-05-03 08:57:21.238] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:213 +[2026-05-03 08:57:28.251] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:214 +[2026-05-03 08:57:36.941] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:215 +[2026-05-03 08:57:44.362] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:216 +[2026-05-03 08:57:51.895] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:217 +[2026-05-03 08:57:58.775] [error] [tmc_uart.cpp:319] [1932] _decode_read error #1 +[2026-05-03 08:58:00.617] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:218 +[2026-05-03 08:58:00.655] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:58:08.099] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:219 +[2026-05-03 08:58:10.621] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:3366.4824896474397,last_temp:211.01355418088247,temp:211.01355418088247,target_temp:210,smoothed_temp:210.252777597677 +[2026-05-03 08:58:16.652] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:220 +[2026-05-03 08:58:17.416] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:3373.27800000038,last_temp:59.99339064703099,temp:59.99339064703099,target_temp:60,smoothed_temp:59.98820925297761 +[2026-05-03 08:58:21.434] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:58:26.474] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:221 +[2026-05-03 08:58:48.287] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:222 +[2026-05-03 08:59:03.305] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:223 +[2026-05-03 08:59:18.577] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:224 +[2026-05-03 08:59:36.150] [info] [print_stats.cpp:157] [1932] cmd_M73 current_layer:225 +[2026-05-03 08:59:36.524] [error] [tmc_uart.cpp:295] [1932] _decode_read error #0 +[2026-05-03 08:59:54.789] [info] [gcode.cpp:1051] [1932] cmd_SET_CONDITION A:WIPE_TOWER B:1 value:2 is_ignore:false +[2026-05-03 08:59:54.789] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = false +[2026-05-03 08:59:54.790] [info] [gcode_move.cpp:638] [1932] cmd_M220 speed 500 speed_factor 0.016666666666666666 100 +[2026-05-03 08:59:55.277] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:59:55.279] [info] [extruder.cpp:501] [1932] cmd_M104 temp 0 index -1 wait false +[2026-05-03 08:59:55.280] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:0,wait:false +[2026-05-03 08:59:55.280] [info] [heater_bed.cpp:57] [1932] cmd_M140 temp 0 wait false +[2026-05-03 08:59:55.280] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:0,wait:false +[2026-05-03 08:59:55.521] [info] [gcode_move.cpp:52] [1932] G180 select 9 +[2026-05-03 08:59:55.522] [info] [gcode.cpp:860] [1932] cmd_SET_CONDITION A=ENABLE_CANVAS, B=1, ENABLE_CANVAS=1 +[2026-05-03 08:59:55.522] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = false +[2026-05-03 08:59:58.563] [info] [mmu.cpp:3949] [1932] (printer) Execute filament retraction from the extruder head +[2026-05-03 08:59:58.563] [info] [gcode_move.cpp:52] [1932] G180 select 800 +[2026-05-03 08:59:58.564] [info] [gcode.cpp:957] [1932] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=207.44604887237685 +[2026-05-03 08:59:58.564] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = true +[2026-05-03 08:59:58.565] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 08:59:58.567] [info] [mmu.cpp:2493] [1932] start extrude channel check. +[2026-05-03 08:59:58.567] [info] [mmu.cpp:2502] [1932] extrude channel check result: 0 ex_fila_status:1 +[2026-05-03 08:59:58.567] [info] [mmu.cpp:4204] [1932] Execute cutting action +[2026-05-03 08:59:58.568] [info] [homing_override.cpp:238] [1932] need true true false homed true true true +[2026-05-03 08:59:58.569] [info] [gcode_move.cpp:52] [1932] G180 select 813 +[2026-05-03 09:00:02.486] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"1"} +[2026-05-03 09:00:02.490] [info] [cutting_switch_sensor.cpp:103] [1932] cutting detect state:true +[2026-05-03 09:00:03.175] [info] [gcode_move.cpp:52] [1932] G180 select 815 +[2026-05-03 09:00:03.987] [info] [gcode_move.cpp:52] [1932] G180 select 800 +[2026-05-03 09:00:03.988] [info] [gcode.cpp:957] [1932] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=198.85327767438375 +[2026-05-03 09:00:03.988] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = true +[2026-05-03 09:00:03.989] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 09:00:04.400] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"0"} +[2026-05-03 09:00:04.409] [info] [cutting_switch_sensor.cpp:103] [1932] cutting detect state:false +[2026-05-03 09:00:06.678] [info] [gcode_move.cpp:52] [1932] G180 select 816 +[2026-05-03 09:00:08.594] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 09:00:09.595] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir -1 channel: 0 +[2026-05-03 09:00:09.595] [info] [mmu.cpp:4235] [1932] Execute cutting action. complete +[2026-05-03 09:00:09.596] [info] [mmu.cpp:4256] [1932] Execute extruder head filament plug out. channel: 0 +[2026-05-03 09:00:09.596] [info] [mmu.cpp:2206] [1932] status[channel] 2 fila_in[channel] 1 +[2026-05-03 09:00:09.596] [info] [mmu.cpp:2246] [1932] clean_waste __OVER +[2026-05-03 09:00:09.596] [info] [mmu.cpp:4396] [1932] Execute rocker arm action +[2026-05-03 09:00:10.598] [info] [mmu.cpp:4407] [1932] Execute rocker arm action complete, dir -1 channel: 0 +[2026-05-03 09:00:10.622] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:3486.484818447805,last_temp:191.16073167684556,temp:191.16073167684556,target_temp:0,smoothed_temp:191.64752667769727 +[2026-05-03 09:00:11.513] [info] [mmu.cpp:2266] [1932] retract last_pos_1 channel: 0 ch_1: 8295.249738097706 ch_2: 2034.6838980239656 ch_3: 0 ch_4: 0 +[2026-05-03 09:00:12.009] [info] [filament_switch_sensor.cpp:332] [1932] _button_handler switch_fila_det false +[2026-05-03 09:00:12.010] [info] [mmu.cpp:2068] [1932] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"0"} +[2026-05-03 09:00:13.424] [info] [mmu.cpp:2289] [1932] ex_fila_status 0 channel 0 pre_pos 8295.249738097706 cur_pos 8389.748845117687 +[2026-05-03 09:00:13.424] [info] [mmu.cpp:2296] [1932] retract cur_pos_1 channel: 0 ch_1: 8389.748845117687 ch_2: 2034.6838980239656 ch_3: 0 ch_4: 0 +[2026-05-03 09:00:13.425] [info] [mmu.cpp:4306] [1932] Execute extruder head filament plug out complete, channel: 0 +[2026-05-03 09:00:13.425] [info] [mmu.cpp:4752] [1932] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 09:00:13.425] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1210 error_level 3 +[2026-05-03 09:00:13.426] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1211 error_level 3 +[2026-05-03 09:00:13.426] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1220 error_level 3 +[2026-05-03 09:00:13.427] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1231 error_level 3 +[2026-05-03 09:00:13.427] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1232 error_level 3 +[2026-05-03 09:00:13.427] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1241 error_level 3 +[2026-05-03 09:00:13.428] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1242 error_level 3 +[2026-05-03 09:00:13.428] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1243 error_level 3 +[2026-05-03 09:00:13.429] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1251 error_level 3 +[2026-05-03 09:00:13.429] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1252 error_level 3 +[2026-05-03 09:00:13.429] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 1265 error_level 3 +[2026-05-03 09:00:13.429] [info] [mmu.cpp:4747] [1932] clear_abnormal_feedback #1 __OVER +[2026-05-03 09:00:13.429] [info] [mmu.cpp:3961] [1932] (printer) Execute filament retraction from the extruder head. complete +[2026-05-03 09:00:13.430] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 09:00:14.245] [info] [gcode.cpp:914] [1932] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=0, BED_MESH_PROFILE=0 +[2026-05-03 09:00:14.245] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = false +[2026-05-03 09:00:14.246] [info] [bed_mesh.cpp:2901] [1932] cmd_BED_MESH_PROFILE: from_slicer 0 execute_calirate_from_slicer 1 +[2026-05-03 09:00:14.261] [info] [bed_mesh.cpp:463] [1932] update_status bed_mesh_exist:0x0100 +[2026-05-03 09:00:14.262] [info] [print_stats.cpp:277] [1932] bed_mesh_exist:0x0100 +[2026-05-03 09:00:14.262] [info] [bed_mesh.cpp:2875] [1932] ProfileManager::load_profile default time 0.015292166999643086 +[2026-05-03 09:00:14.263] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 09:00:14.263] [info] [gcode.cpp:914] [1932] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=1, BED_MESH_PROFILE=0 +[2026-05-03 09:00:14.263] [info] [gcode.cpp:1053] [1932] cmd_SET_CONDITION is_ingore = true +[2026-05-03 09:00:14.264] [info] [gcode.cpp:1074] [1932] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 09:00:14.265] [info] [mcu.cpp:712] [1932] set_digital pin PB7 3490.4776779166664 3516.033920093 +[2026-05-03 09:00:14.265] [info] [mcu.cpp:712] [1932] set_digital pin PF6 3490.4776779166664 3516.034558801 +[2026-05-03 09:00:14.266] [info] [mcu.cpp:712] [1932] set_digital pin PE15 3490.4776779166664 3516.035189884 +[2026-05-03 09:00:14.267] [info] [mcu.cpp:712] [1932] set_digital pin PE12 3490.4776779166664 3516.035879801 +[2026-05-03 09:00:14.307] [info] [virtual_sdcard.cpp:1693] [1932] Finished SD card print +[2026-05-03 09:00:14.307] [info] [virtual_sdcard.cpp:1772] [1932] Exiting SD card print (position 6055579) +[2026-05-03 09:00:14.307] [info] [virtual_sdcard.cpp:1798] [1932] print_stats->note_complete +[2026-05-03 09:00:14.308] [info] [print_stats.cpp:288] [1932] note_finish state complete error_message +[2026-05-03 09:00:14.308] [info] [cavity_fan.cpp:196] [1932] update_timer(fan_timer, _NEVER +[2026-05-03 09:00:14.308] [info] [gcode.cpp:544] [1932] respond_ecode: , error_code: 907 error_level 3 +[2026-05-03 09:00:14.308] [info] [pause_resume.cpp:126] [1932] PauseResume cool_down_state 0x0e +[2026-05-03 09:00:14.308] [info] [virtual_sdcard.cpp:166] [1932] VirtualSD cool_down_state 0x0e +[2026-05-03 09:00:14.309] [info] [cavity_fan.cpp:203] [1932] value complete mode false is_printing false last_speed 0 tick_out_time 0 +[2026-05-03 09:00:14.309] [info] [idle_timeout.cpp:138] [1932] handle_print_state print_state:complete +[2026-05-03 09:00:14.396] [info] [gcode_move.cpp:638] [1932] cmd_M220 speed 50 speed_factor 0.016666666666666666 100 +[2026-05-03 09:00:14.397] [info] [webhooks.cpp:170] [1932] return total: {"id":36,"result":{}} +[2026-05-03 09:00:14.398] [info] [gcode.cpp:789] [1932] cmd_M117 set printer mode: 1 +[2026-05-03 09:00:14.399] [info] [webhooks.cpp:170] [1932] return total: {"id":37,"result":{}} +[2026-05-03 09:00:14.844] [info] [device_status.cpp:989] [1998] Stop AI spaghetti detection +[2026-05-03 09:00:14.844] [info] [uds_aicamera_client.cpp:589] [1998] stop_ai_spaghetti_detection called +[2026-05-03 09:00:14.845] [info] [uds_aicamera_client.cpp:350] [1998] Sending UDS request: {"id":4,"method":"ai_detection","params":{"operate":"wire_pause"}} +[2026-05-03 09:00:14.848] [info] [device_ui_message_handle.cpp:356] [1998] report_error: {"id":0,"report":{"error_code":1301,"error_level":3,"message":"ai spaghetti detection error"}} +[2026-05-03 09:00:14.849] [info] [uds_aicamera_client.cpp:41] [1994] Received UDS message: {"id":4,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 09:00:14.849] [info] [uds_aicamera_client.cpp:194] [1994] Received UDS message: {"id":4,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 09:00:14.849] [error] [uds_aicamera_client.cpp:196] [1994] Parsing UDS message without 'result': {"id":4,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 09:00:14.851] [info] [device_ui_message_handle.cpp:747] [1998] Reporting history task: {"id":0,"method":"report_history_task","result":{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}} +[2026-05-03 09:00:14.852] [info] [record_manager.cpp:412] [1998] Adding power outage task, updated its information id 9052df81-606e-47e9-ab30-68836972683f name ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode status 1. +[2026-05-03 09:00:14.915] [info] [sql_database.cpp:120] [1998] Update SQL: UPDATE task_record SET task_name = ?, begin_time = ?, end_time = ?, task_status = ?, time_lapse_video_status = ?, time_lapse_video_url = ?, time_lapse_video_size = ?, time_lapse_video_duration = ?, upload_flag = ?, file_create_time = ? WHERE task_id = ?; +[2026-05-03 09:00:14.931] [info] [device_status.cpp:730] [1998] post_change_message {"machine_status":{"progress":0},"print_status":{"current_layer":0,"filename":"","print_duration":0,"remaining_time_sec":0,"total_duration":0,"uuid":""}} +[2026-05-03 09:00:14.931] [info] [device_status.cpp:1483] [1998] Device status change to: 1, last status: 2 +[2026-05-03 09:00:17.915] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:3493.77800000038,last_temp:59.230227579710515,temp:59.230227579710515,target_temp:0,smoothed_temp:59.23930835990015 +[2026-05-03 09:01:48.260] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=3610.0284931789997,half_rtt=0.0002518125002097804,freq=119997700.53031133 +[2026-05-03 09:02:10.624] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:3606.4871130870706,last_temp:122.14744809026422,temp:122.14744809026422,target_temp:0,smoothed_temp:122.34268729436701 +[2026-05-03 09:02:18.414] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:3614.27800000038,last_temp:55.696527417480866,temp:55.696527417480866,target_temp:0,smoothed_temp:55.69554803912703 +[2026-05-03 09:02:36.504] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=3658.272283035,half_rtt=0.00025062500026251655,freq=119997724.77924816 +[2026-05-03 09:04:10.626] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:3726.4893351164546,last_temp:86.53449241536322,temp:86.53449241536322,target_temp:0,smoothed_temp:86.65834291655767 +[2026-05-03 09:04:18.914] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:3734.77800000038,last_temp:53.02077010914263,temp:53.02077010914263,target_temp:0,smoothed_temp:53.033035665910276 +[2026-05-03 09:04:39.578] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=3781.346591344,half_rtt=0.0002505625000139844,freq=119997767.77562928 +[2026-05-03 09:05:11.081] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=3812.8499773589997,half_rtt=0.00024929150026764546,freq=119997763.75266743 +[2026-05-03 09:05:14.034] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=3815.802862944,half_rtt=0.000245562500140295,freq=119997761.63967727 +[2026-05-03 09:05:15.215] [info] [extruder.cpp:501] [1932] cmd_M104 temp 0 index -1 wait false +[2026-05-03 09:05:15.215] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:0,wait:false +[2026-05-03 09:05:36.941] [info] [gcode_move.cpp:638] [1932] cmd_M220 speed 50 speed_factor 0.016666666666666666 100 +[2026-05-03 09:05:36.942] [info] [webhooks.cpp:170] [1932] return total: {"id":38,"result":{}} +[2026-05-03 09:05:36.945] [info] [gcode.cpp:789] [1932] cmd_M117 set printer mode: 1 +[2026-05-03 09:05:36.945] [info] [webhooks.cpp:170] [1932] return total: {"id":39,"result":{}} +[2026-05-03 09:06:10.627] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:3846.4915602388774,last_temp:66.63004281866336,temp:66.63004281866336,target_temp:0,smoothed_temp:66.64378925998753 +[2026-05-03 09:06:19.413] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:3855.27800000038,last_temp:50.66712228805153,temp:50.66712228805153,target_temp:0,smoothed_temp:50.6752574334601 +[2026-05-03 09:08:10.629] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:3966.4937509867723,last_temp:53.55468787631594,temp:53.55468787631594,target_temp:0,smoothed_temp:53.63685138800077 +[2026-05-03 09:08:19.913] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:3975.77800000038,last_temp:48.01398949614759,temp:48.01398949614759,target_temp:0,smoothed_temp:48.016052193210555 +[2026-05-03 09:09:11.665] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"script":"set_status","status":11,"sub_status":3000} +[2026-05-03 09:09:11.666] [info] [device_ui_message_handle.cpp:535] [1932] Setting status: 11, sub_status: 3000 +[2026-05-03 09:09:11.669] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:09:11.669] [info] [webhooks.cpp:170] [1932] return total: {"id":40,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:09:11.897] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"action":"add","files":["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"],"script":"file_manager"} +[2026-05-03 09:09:11.899] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"file_manager"} +[2026-05-03 09:09:11.899] [info] [webhooks.cpp:170] [1932] return total: {"id":41,"method":"sync_info","result":{"script":"file_manager"}} +[2026-05-03 09:09:11.902] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"script":"set_status","status":11,"sub_status":3001} +[2026-05-03 09:09:11.903] [info] [device_ui_message_handle.cpp:535] [1932] Setting status: 11, sub_status: 3001 +[2026-05-03 09:09:11.905] [info] [device_status.cpp:1483] [1932] Device status change to: 1, last status: 11 +[2026-05-03 09:09:11.907] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:09:11.907] [info] [webhooks.cpp:170] [1932] return total: {"id":42,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:09:11.965] [info] [sql_database.cpp:164] [1942] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:09:11.966] [info] [sql_database.cpp:164] [1942] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:09:11.967] [info] [record_manager.cpp:496] [1942] Parsing local file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:09:11.967] [info] [record_manager.cpp:40] [1942] GcodeParser open file: /opt/usr/gcode/local//IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:09:11.971] [info] [record_manager.cpp:383] [1942] color map size: 1 +[2026-05-03 09:09:11.971] [info] [sql_database.cpp:97] [1942] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:09:11.984] [info] [sql_database.cpp:97] [1942] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-05-03 09:09:12.005] [info] [record_manager.cpp:512] [1942] Parsed file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode, size: 1111049, layer: 50, print_time: 519, total_filament_used: 2.67, color_map size: 1 +[2026-05-03 09:09:12.006] [info] [record_manager.cpp:1191] [1942] Syncing 1 files to server retry 0 +[2026-05-03 09:09:12.037] [info] [cloud_service_client.cpp:862] [1942] Batch adding files to server... +[2026-05-03 09:09:12.068] [info] [http_client.cpp:23] [1942] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch, msg: [{"colorMap":[{"color":"#26A69A","t":0,"type":"PLA"}],"createTime":1777770551,"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","lastPrintTime":0,"layer":50,"printTime":519,"size":1111049,"totalFilamentUsed":2.67,"totalPrintTimes":0,"type":"file"}] +[2026-05-03 09:09:12.656] [info] [cloud_service_client.cpp:869] [1942] Batch add files response: {"code":0,"data":true,"msg":"","traceId":"22c686258f8829857d955ee28ac4d588"} +[2026-05-03 09:09:12.656] [info] [cloud_service_client.cpp:875] [1942] Batch add files to server success, size 1 +[2026-05-03 09:09:12.656] [info] [sql_database.cpp:120] [1942] Update SQL: UPDATE file_details SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:09:12.700] [info] [cloud_service_client.cpp:704] [1942] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 09:09:12.700] [info] [http_client.cpp:141] [1942] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777770551-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png +[2026-05-03 09:09:13.388] [info] [http_client.cpp:199] [1995] HTTP async request completed with status code: 200 +[2026-05-03 09:09:13.390] [info] [http_client.cpp:59] [1942] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777770551-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png attempt result: 0 +[2026-05-03 09:09:13.391] [info] [cloud_service_client.cpp:706] [1942] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770551-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T010913Z&x-oss-expires=86400&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=7ae682e905b142ff6b4a591080e2e49ec819cba5b5ab2ebec0ca504314e104bd","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770551-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T010913Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=6df167236c26a7a38b2da5898001649e350346b99adf7c7b201b1b60bb058e0b","expireTime":1777772353,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/1777770551-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"},"msg":"","traceId":"19139a0f1946bf016aa91fe6538fe847"} +[2026-05-03 09:09:13.391] [info] [http_client.cpp:306] [1942] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770551-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T010913Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=6df167236c26a7a38b2da5898001649e350346b99adf7c7b201b1b60bb058e0b +[2026-05-03 09:09:14.061] [info] [record_manager.cpp:1407] [1942] Uploading src_nameF01CFFQQFN55YKS/thumbnail/1777770551-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png thumbnail for file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode to F01CFFQQFN55YKS/thumbnail/1777770551-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png +[2026-05-03 09:09:14.061] [info] [record_manager.cpp:1348] [1942] Retrying 0 sync for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:09:14.062] [info] [cloud_service_client.cpp:885] [1942] Modify file info request: {"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/1777770551-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"} +[2026-05-03 09:09:14.342] [info] [cloud_service_client.cpp:888] [1942] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"abd5a72566a8b2677941098b79660764"} +[2026-05-03 09:09:14.342] [info] [sql_database.cpp:120] [1942] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:09:14.354] [info] [sql_database.cpp:685] [1942] Set upload flag for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:10:10.631] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:4086.4959248727378,last_temp:47.446004260820246,temp:47.446004260820246,target_temp:0,smoothed_temp:47.59368574100669 +[2026-05-03 09:10:20.412] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:4096.27800000038,last_temp:45.834048347707494,temp:45.834048347707494,target_temp:0,smoothed_temp:45.827789459738604 +[2026-05-03 09:10:56.621] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"script":"set_status","status":11,"sub_status":3000} +[2026-05-03 09:10:56.622] [info] [device_ui_message_handle.cpp:535] [1932] Setting status: 11, sub_status: 3000 +[2026-05-03 09:10:56.622] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:10:56.623] [info] [webhooks.cpp:170] [1932] return total: {"id":43,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:10:56.861] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"action":"add","files":["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"],"script":"file_manager"} +[2026-05-03 09:10:56.862] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"file_manager"} +[2026-05-03 09:10:56.862] [info] [sql_database.cpp:164] [1942] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:10:56.862] [info] [webhooks.cpp:170] [1932] return total: {"id":44,"method":"sync_info","result":{"script":"file_manager"}} +[2026-05-03 09:10:56.864] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"script":"set_status","status":11,"sub_status":3001} +[2026-05-03 09:10:56.866] [info] [device_ui_message_handle.cpp:535] [1932] Setting status: 11, sub_status: 3001 +[2026-05-03 09:10:56.868] [info] [device_status.cpp:1483] [1932] Device status change to: 1, last status: 11 +[2026-05-03 09:10:56.871] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:10:56.872] [info] [webhooks.cpp:170] [1932] return total: {"id":45,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:10:56.881] [info] [sql_database.cpp:164] [1942] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:10:56.902] [info] [http_client.cpp:23] [1942] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch-delete, msg: ["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"] +[2026-05-03 09:10:57.388] [info] [cloud_service_client.cpp:909] [1942] Delete file response: {"code":0,"data":true,"msg":"","traceId":"40b99cd826525afa64b5899cb197ceda"} +[2026-05-03 09:10:57.388] [info] [record_manager.cpp:1032] [1942] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode marked for deletion on server later, upload_flag: 0 +[2026-05-03 09:10:57.388] [info] [record_manager.cpp:496] [1942] Parsing local file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:10:57.388] [info] [record_manager.cpp:40] [1942] GcodeParser open file: /opt/usr/gcode/local//IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:10:57.392] [info] [record_manager.cpp:383] [1942] color map size: 1 +[2026-05-03 09:10:57.392] [info] [sql_database.cpp:97] [1942] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:10:57.407] [info] [sql_database.cpp:97] [1942] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-05-03 09:10:57.421] [info] [record_manager.cpp:512] [1942] Parsed file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode, size: 1111049, layer: 50, print_time: 519, total_filament_used: 2.67, color_map size: 1 +[2026-05-03 09:10:57.421] [info] [record_manager.cpp:1191] [1942] Syncing 1 files to server retry 0 +[2026-05-03 09:10:57.421] [info] [cloud_service_client.cpp:862] [1942] Batch adding files to server... +[2026-05-03 09:10:57.422] [info] [http_client.cpp:23] [1942] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch, msg: [{"colorMap":[{"color":"#26A69A","t":0,"type":"PLA"}],"createTime":1777770656,"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","lastPrintTime":0,"layer":50,"printTime":519,"size":1111049,"totalFilamentUsed":2.67,"totalPrintTimes":0,"type":"file"}] +[2026-05-03 09:10:57.703] [info] [cloud_service_client.cpp:869] [1942] Batch add files response: {"code":0,"data":true,"msg":"","traceId":"a16bf5a7c24ad212a4a095277f9c87f3"} +[2026-05-03 09:10:57.703] [info] [cloud_service_client.cpp:875] [1942] Batch add files to server success, size 1 +[2026-05-03 09:10:57.703] [info] [sql_database.cpp:120] [1942] Update SQL: UPDATE file_details SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:10:57.718] [info] [cloud_service_client.cpp:704] [1942] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 09:10:57.718] [info] [http_client.cpp:141] [1942] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777770656-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png +[2026-05-03 09:10:58.290] [info] [http_client.cpp:199] [1995] HTTP async request completed with status code: 200 +[2026-05-03 09:10:58.292] [info] [http_client.cpp:59] [1942] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777770656-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png attempt result: 0 +[2026-05-03 09:10:58.292] [info] [cloud_service_client.cpp:706] [1942] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770656-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011058Z&x-oss-expires=86400&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=7b8c7395c027ebf9ccaed0716adf6838f3905e3ef15533e62ab7678e1f1e1940","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770656-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011058Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=3f851d323bee47c1eee89b745b6b510fa6b798812adb8ec623362fa6e129019e","expireTime":1777772458,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/1777770656-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"},"msg":"","traceId":"6c73841202cac7258c4e7cbfccbddb2a"} +[2026-05-03 09:10:58.293] [info] [http_client.cpp:306] [1942] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770656-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011058Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=3f851d323bee47c1eee89b745b6b510fa6b798812adb8ec623362fa6e129019e +[2026-05-03 09:10:58.696] [info] [record_manager.cpp:1407] [1942] Uploading src_nameF01CFFQQFN55YKS/thumbnail/1777770656-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png thumbnail for file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode to F01CFFQQFN55YKS/thumbnail/1777770656-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png +[2026-05-03 09:10:58.696] [info] [record_manager.cpp:1348] [1942] Retrying 0 sync for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:10:58.696] [info] [cloud_service_client.cpp:885] [1942] Modify file info request: {"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/1777770656-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"} +[2026-05-03 09:10:58.996] [info] [cloud_service_client.cpp:888] [1942] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"9a18943576a83eefc2c5ddea3a72d0d2"} +[2026-05-03 09:10:58.996] [info] [sql_database.cpp:120] [1942] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:10:59.037] [info] [sql_database.cpp:685] [1942] Set upload flag for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:12:10.633] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:4206.498089164821,last_temp:45.37500205434645,temp:45.37500205434645,target_temp:0,smoothed_temp:45.29660091590699 +[2026-05-03 09:12:12.474] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"script":"set_status","status":11,"sub_status":3000} +[2026-05-03 09:12:12.474] [info] [device_ui_message_handle.cpp:535] [1932] Setting status: 11, sub_status: 3000 +[2026-05-03 09:12:12.475] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:12:12.476] [info] [webhooks.cpp:170] [1932] return total: {"id":46,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:12:12.714] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"action":"add","files":["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"],"script":"file_manager"} +[2026-05-03 09:12:12.715] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"file_manager"} +[2026-05-03 09:12:12.715] [info] [webhooks.cpp:170] [1932] return total: {"id":47,"method":"sync_info","result":{"script":"file_manager"}} +[2026-05-03 09:12:12.715] [info] [sql_database.cpp:164] [1942] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:12:12.718] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"script":"set_status","status":11,"sub_status":3001} +[2026-05-03 09:12:12.719] [info] [device_ui_message_handle.cpp:535] [1932] Setting status: 11, sub_status: 3001 +[2026-05-03 09:12:12.721] [info] [device_status.cpp:1483] [1932] Device status change to: 1, last status: 11 +[2026-05-03 09:12:12.723] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:12:12.724] [info] [webhooks.cpp:170] [1932] return total: {"id":48,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:12:12.735] [info] [sql_database.cpp:164] [1942] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:12:12.753] [info] [http_client.cpp:23] [1942] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch-delete, msg: ["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"] +[2026-05-03 09:12:13.128] [info] [cloud_service_client.cpp:909] [1942] Delete file response: {"code":0,"data":true,"msg":"","traceId":"f2d7b13e8d1b1077ff84adc43513349a"} +[2026-05-03 09:12:13.128] [info] [record_manager.cpp:1032] [1942] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode marked for deletion on server later, upload_flag: 0 +[2026-05-03 09:12:13.128] [info] [record_manager.cpp:496] [1942] Parsing local file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:12:13.129] [info] [record_manager.cpp:40] [1942] GcodeParser open file: /opt/usr/gcode/local//IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:12:13.132] [info] [record_manager.cpp:383] [1942] color map size: 1 +[2026-05-03 09:12:13.133] [info] [sql_database.cpp:97] [1942] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:12:13.147] [info] [sql_database.cpp:97] [1942] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-05-03 09:12:13.161] [info] [record_manager.cpp:512] [1942] Parsed file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode, size: 1111049, layer: 50, print_time: 519, total_filament_used: 2.67, color_map size: 1 +[2026-05-03 09:12:13.161] [info] [record_manager.cpp:1191] [1942] Syncing 1 files to server retry 0 +[2026-05-03 09:12:13.161] [info] [cloud_service_client.cpp:862] [1942] Batch adding files to server... +[2026-05-03 09:12:13.162] [info] [http_client.cpp:23] [1942] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch, msg: [{"colorMap":[{"color":"#26A69A","t":0,"type":"PLA"}],"createTime":1777770732,"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","lastPrintTime":0,"layer":50,"printTime":519,"size":1111049,"totalFilamentUsed":2.67,"totalPrintTimes":0,"type":"file"}] +[2026-05-03 09:12:13.451] [info] [cloud_service_client.cpp:869] [1942] Batch add files response: {"code":0,"data":true,"msg":"","traceId":"21cbf7996e7006e89dcd30dc8a917fd2"} +[2026-05-03 09:12:13.451] [info] [cloud_service_client.cpp:875] [1942] Batch add files to server success, size 1 +[2026-05-03 09:12:13.452] [info] [sql_database.cpp:120] [1942] Update SQL: UPDATE file_details SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:12:13.465] [info] [cloud_service_client.cpp:704] [1942] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 09:12:13.465] [info] [http_client.cpp:141] [1942] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777770732-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png +[2026-05-03 09:12:13.645] [info] [http_client.cpp:199] [1995] HTTP async request completed with status code: 200 +[2026-05-03 09:12:13.646] [info] [http_client.cpp:59] [1942] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777770732-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png attempt result: 0 +[2026-05-03 09:12:13.647] [info] [cloud_service_client.cpp:706] [1942] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770732-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011213Z&x-oss-expires=86400&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=f4a3120e009af85cda7c033111f0f129a2798220b2f6fe126841e2cb431b98a8","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770732-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011213Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=9205253fd8b833a4db4116b7d051fa91fd54fafe42ce6e0a46bf0113f0853125","expireTime":1777772533,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/1777770732-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"},"msg":"","traceId":"f13ecdd406b768954ef7dd752c3fbc17"} +[2026-05-03 09:12:13.648] [info] [http_client.cpp:306] [1942] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770732-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011213Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=9205253fd8b833a4db4116b7d051fa91fd54fafe42ce6e0a46bf0113f0853125 +[2026-05-03 09:12:14.067] [info] [record_manager.cpp:1407] [1942] Uploading src_nameF01CFFQQFN55YKS/thumbnail/1777770732-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png thumbnail for file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode to F01CFFQQFN55YKS/thumbnail/1777770732-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png +[2026-05-03 09:12:14.067] [info] [record_manager.cpp:1348] [1942] Retrying 0 sync for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:12:14.068] [info] [cloud_service_client.cpp:885] [1942] Modify file info request: {"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/1777770732-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"} +[2026-05-03 09:12:14.355] [info] [cloud_service_client.cpp:888] [1942] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"d8d8d45e73ebe8af539699faeaf6406b"} +[2026-05-03 09:12:14.355] [info] [sql_database.cpp:120] [1942] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:12:14.368] [info] [sql_database.cpp:685] [1942] Set upload flag for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:12:20.912] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:4216.77800000038,last_temp:44.21396877020527,temp:44.21396877020527,target_temp:0,smoothed_temp:44.21332273398063 +[2026-05-03 09:12:27.658] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"script":"set_status","status":11,"sub_status":3000} +[2026-05-03 09:12:27.658] [info] [device_ui_message_handle.cpp:535] [1932] Setting status: 11, sub_status: 3000 +[2026-05-03 09:12:27.659] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:12:27.660] [info] [webhooks.cpp:170] [1932] return total: {"id":49,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:12:27.887] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"action":"add","files":["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"],"script":"file_manager"} +[2026-05-03 09:12:27.889] [info] [sql_database.cpp:164] [1942] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:12:27.889] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"file_manager"} +[2026-05-03 09:12:27.890] [info] [webhooks.cpp:170] [1932] return total: {"id":50,"method":"sync_info","result":{"script":"file_manager"}} +[2026-05-03 09:12:27.893] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"script":"set_status","status":11,"sub_status":3001} +[2026-05-03 09:12:27.894] [info] [device_ui_message_handle.cpp:535] [1932] Setting status: 11, sub_status: 3001 +[2026-05-03 09:12:27.896] [info] [device_status.cpp:1483] [1932] Device status change to: 1, last status: 11 +[2026-05-03 09:12:27.902] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:12:27.902] [info] [webhooks.cpp:170] [1932] return total: {"id":51,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:12:27.907] [info] [sql_database.cpp:164] [1942] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:12:27.923] [info] [http_client.cpp:23] [1942] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch-delete, msg: ["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"] +[2026-05-03 09:12:28.289] [info] [cloud_service_client.cpp:909] [1942] Delete file response: {"code":0,"data":true,"msg":"","traceId":"b41c9b93841cea26275c036fc7cdd46d"} +[2026-05-03 09:12:28.290] [info] [record_manager.cpp:1032] [1942] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode marked for deletion on server later, upload_flag: 0 +[2026-05-03 09:12:28.290] [info] [record_manager.cpp:496] [1942] Parsing local file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:12:28.290] [info] [record_manager.cpp:40] [1942] GcodeParser open file: /opt/usr/gcode/local//IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:12:28.294] [info] [record_manager.cpp:383] [1942] color map size: 1 +[2026-05-03 09:12:28.294] [info] [sql_database.cpp:97] [1942] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:12:28.308] [info] [sql_database.cpp:97] [1942] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-05-03 09:12:28.323] [info] [record_manager.cpp:512] [1942] Parsed file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode, size: 1111049, layer: 50, print_time: 519, total_filament_used: 2.67, color_map size: 1 +[2026-05-03 09:12:28.323] [info] [record_manager.cpp:1191] [1942] Syncing 1 files to server retry 0 +[2026-05-03 09:12:28.323] [info] [cloud_service_client.cpp:862] [1942] Batch adding files to server... +[2026-05-03 09:12:28.324] [info] [http_client.cpp:23] [1942] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch, msg: [{"colorMap":[{"color":"#26A69A","t":0,"type":"PLA"}],"createTime":1777770747,"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","lastPrintTime":0,"layer":50,"printTime":519,"size":1111049,"totalFilamentUsed":2.67,"totalPrintTimes":0,"type":"file"}] +[2026-05-03 09:12:28.619] [info] [cloud_service_client.cpp:869] [1942] Batch add files response: {"code":0,"data":true,"msg":"","traceId":"8c63efbfce8dce5e9b6b00534c01f865"} +[2026-05-03 09:12:28.620] [info] [cloud_service_client.cpp:875] [1942] Batch add files to server success, size 1 +[2026-05-03 09:12:28.620] [info] [sql_database.cpp:120] [1942] Update SQL: UPDATE file_details SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:12:28.633] [info] [cloud_service_client.cpp:704] [1942] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 09:12:28.633] [info] [http_client.cpp:141] [1942] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777770747-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png +[2026-05-03 09:12:29.203] [info] [http_client.cpp:199] [1995] HTTP async request completed with status code: 200 +[2026-05-03 09:12:29.205] [info] [http_client.cpp:59] [1942] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777770747-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png attempt result: 0 +[2026-05-03 09:12:29.206] [info] [cloud_service_client.cpp:706] [1942] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770747-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011229Z&x-oss-expires=86400&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=258ce26c4f8c7a73c24ee2af549f6e5f94393d24409eb9d1af05c97504e4ecbf","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770747-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011229Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=ba4362cf20060fecebffb552d5f8eb852b369fa49f268137a0caaec7142c2a05","expireTime":1777772549,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/1777770747-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"},"msg":"","traceId":"cbf7e2dbc1222e940c83ca0b59e8dc4e"} +[2026-05-03 09:12:29.206] [info] [http_client.cpp:306] [1942] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770747-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011229Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=ba4362cf20060fecebffb552d5f8eb852b369fa49f268137a0caaec7142c2a05 +[2026-05-03 09:12:29.451] [info] [record_manager.cpp:1407] [1942] Uploading src_nameF01CFFQQFN55YKS/thumbnail/1777770747-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png thumbnail for file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode to F01CFFQQFN55YKS/thumbnail/1777770747-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png +[2026-05-03 09:12:29.451] [info] [record_manager.cpp:1348] [1942] Retrying 0 sync for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:12:29.451] [info] [cloud_service_client.cpp:885] [1942] Modify file info request: {"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/1777770747-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"} +[2026-05-03 09:12:29.744] [info] [cloud_service_client.cpp:888] [1942] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"6f5057a14942813774423c3936f8f348"} +[2026-05-03 09:12:29.745] [info] [sql_database.cpp:120] [1942] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:12:29.761] [info] [sql_database.cpp:685] [1942] Set upload flag for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:12:47.919] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"script":"set_status","status":11,"sub_status":3000} +[2026-05-03 09:12:47.920] [info] [device_ui_message_handle.cpp:535] [1932] Setting status: 11, sub_status: 3000 +[2026-05-03 09:12:47.923] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:12:47.924] [info] [webhooks.cpp:170] [1932] return total: {"id":52,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:12:48.158] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"action":"add","files":["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"],"script":"file_manager"} +[2026-05-03 09:12:48.160] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"file_manager"} +[2026-05-03 09:12:48.160] [info] [sql_database.cpp:164] [1942] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:12:48.161] [info] [webhooks.cpp:170] [1932] return total: {"id":53,"method":"sync_info","result":{"script":"file_manager"}} +[2026-05-03 09:12:48.164] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"script":"set_status","status":11,"sub_status":3001} +[2026-05-03 09:12:48.166] [info] [device_ui_message_handle.cpp:535] [1932] Setting status: 11, sub_status: 3001 +[2026-05-03 09:12:48.170] [info] [device_status.cpp:1483] [1932] Device status change to: 1, last status: 11 +[2026-05-03 09:12:48.173] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:12:48.174] [info] [webhooks.cpp:170] [1932] return total: {"id":54,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:12:48.178] [info] [sql_database.cpp:164] [1942] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:12:48.195] [info] [http_client.cpp:23] [1942] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch-delete, msg: ["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"] +[2026-05-03 09:12:48.538] [info] [cloud_service_client.cpp:909] [1942] Delete file response: {"code":0,"data":true,"msg":"","traceId":"c002401579a8a625bf485bcf6b9ac2d0"} +[2026-05-03 09:12:48.538] [info] [record_manager.cpp:1032] [1942] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode marked for deletion on server later, upload_flag: 0 +[2026-05-03 09:12:48.538] [info] [record_manager.cpp:496] [1942] Parsing local file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:12:48.538] [info] [record_manager.cpp:40] [1942] GcodeParser open file: /opt/usr/gcode/local//IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:12:48.542] [info] [record_manager.cpp:383] [1942] color map size: 1 +[2026-05-03 09:12:48.543] [info] [sql_database.cpp:97] [1942] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:12:48.569] [info] [sql_database.cpp:97] [1942] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-05-03 09:12:48.583] [info] [record_manager.cpp:512] [1942] Parsed file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode, size: 1111049, layer: 50, print_time: 519, total_filament_used: 2.67, color_map size: 1 +[2026-05-03 09:12:48.584] [info] [record_manager.cpp:1191] [1942] Syncing 1 files to server retry 0 +[2026-05-03 09:12:48.584] [info] [cloud_service_client.cpp:862] [1942] Batch adding files to server... +[2026-05-03 09:12:48.585] [info] [http_client.cpp:23] [1942] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch, msg: [{"colorMap":[{"color":"#26A69A","t":0,"type":"PLA"}],"createTime":1777770768,"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","lastPrintTime":0,"layer":50,"printTime":519,"size":1111049,"totalFilamentUsed":2.67,"totalPrintTimes":0,"type":"file"}] +[2026-05-03 09:12:48.889] [info] [cloud_service_client.cpp:869] [1942] Batch add files response: {"code":0,"data":true,"msg":"","traceId":"4a5a4cee7f7a6d215411bf6b924c2d37"} +[2026-05-03 09:12:48.890] [info] [cloud_service_client.cpp:875] [1942] Batch add files to server success, size 1 +[2026-05-03 09:12:48.890] [info] [sql_database.cpp:120] [1942] Update SQL: UPDATE file_details SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:12:48.904] [info] [cloud_service_client.cpp:704] [1942] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 09:12:48.904] [info] [http_client.cpp:141] [1942] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777770768-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png +[2026-05-03 09:12:49.085] [info] [http_client.cpp:199] [1995] HTTP async request completed with status code: 200 +[2026-05-03 09:12:49.087] [info] [http_client.cpp:59] [1942] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777770768-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png attempt result: 0 +[2026-05-03 09:12:49.088] [info] [cloud_service_client.cpp:706] [1942] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770768-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011249Z&x-oss-expires=86400&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=5565f182a54cc84de2fb6983c125623b777ab3b87da8b76c88ac5079c1d6c32d","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770768-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011249Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=997b3a07779ae3f5316dfb62ecb9b07e0502fe1a0b39b2986096dbf5cbe527c1","expireTime":1777772569,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/1777770768-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"},"msg":"","traceId":"5814eb0ad95122cb67de0f77326e3b97"} +[2026-05-03 09:12:49.089] [info] [http_client.cpp:306] [1942] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770768-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011249Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=997b3a07779ae3f5316dfb62ecb9b07e0502fe1a0b39b2986096dbf5cbe527c1 +[2026-05-03 09:12:49.897] [info] [record_manager.cpp:1407] [1942] Uploading src_nameF01CFFQQFN55YKS/thumbnail/1777770768-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png thumbnail for file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode to F01CFFQQFN55YKS/thumbnail/1777770768-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png +[2026-05-03 09:12:49.898] [info] [record_manager.cpp:1348] [1942] Retrying 0 sync for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:12:49.898] [info] [cloud_service_client.cpp:885] [1942] Modify file info request: {"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/1777770768-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"} +[2026-05-03 09:12:50.203] [info] [cloud_service_client.cpp:888] [1942] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"3ce989e71af0ea299ef9245423fe532b"} +[2026-05-03 09:12:50.203] [info] [sql_database.cpp:120] [1942] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:12:50.219] [info] [sql_database.cpp:685] [1942] Set upload flag for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:14:10.634] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:4326.50021949984,last_temp:43.60147412763018,temp:43.60147412763018,target_temp:0,smoothed_temp:43.55815970489071 +[2026-05-03 09:14:17.626] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"script":"set_status","status":11,"sub_status":3000} +[2026-05-03 09:14:17.627] [info] [device_ui_message_handle.cpp:535] [1932] Setting status: 11, sub_status: 3000 +[2026-05-03 09:14:17.630] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:14:17.631] [info] [webhooks.cpp:170] [1932] return total: {"id":55,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:14:17.865] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"action":"add","files":["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"],"script":"file_manager"} +[2026-05-03 09:14:17.867] [info] [sql_database.cpp:164] [1942] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:14:17.870] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"file_manager"} +[2026-05-03 09:14:17.871] [info] [webhooks.cpp:170] [1932] return total: {"id":56,"method":"sync_info","result":{"script":"file_manager"}} +[2026-05-03 09:14:17.886] [info] [sql_database.cpp:164] [1942] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:14:17.904] [info] [http_client.cpp:23] [1942] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch-delete, msg: ["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"] +[2026-05-03 09:14:17.909] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"script":"set_status","status":11,"sub_status":3001} +[2026-05-03 09:14:17.910] [info] [device_ui_message_handle.cpp:535] [1932] Setting status: 11, sub_status: 3001 +[2026-05-03 09:14:17.910] [info] [device_status.cpp:1483] [1932] Device status change to: 1, last status: 11 +[2026-05-03 09:14:17.912] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:14:17.912] [info] [webhooks.cpp:170] [1932] return total: {"id":57,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:14:18.316] [info] [cloud_service_client.cpp:909] [1942] Delete file response: {"code":0,"data":true,"msg":"","traceId":"e5b6f135ec29db31aed2bf1520c812cb"} +[2026-05-03 09:14:18.317] [info] [record_manager.cpp:1032] [1942] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode marked for deletion on server later, upload_flag: 0 +[2026-05-03 09:14:18.317] [info] [record_manager.cpp:496] [1942] Parsing local file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:14:18.317] [info] [record_manager.cpp:40] [1942] GcodeParser open file: /opt/usr/gcode/local//IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:14:18.321] [info] [record_manager.cpp:383] [1942] color map size: 1 +[2026-05-03 09:14:18.321] [info] [sql_database.cpp:97] [1942] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:14:18.333] [info] [sql_database.cpp:97] [1942] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-05-03 09:14:18.348] [info] [record_manager.cpp:512] [1942] Parsed file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode, size: 1111049, layer: 50, print_time: 519, total_filament_used: 2.67, color_map size: 1 +[2026-05-03 09:14:18.349] [info] [record_manager.cpp:1191] [1942] Syncing 1 files to server retry 0 +[2026-05-03 09:14:18.349] [info] [cloud_service_client.cpp:862] [1942] Batch adding files to server... +[2026-05-03 09:14:18.349] [info] [http_client.cpp:23] [1942] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch, msg: [{"colorMap":[{"color":"#26A69A","t":0,"type":"PLA"}],"createTime":1777770857,"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","lastPrintTime":0,"layer":50,"printTime":519,"size":1111049,"totalFilamentUsed":2.67,"totalPrintTimes":0,"type":"file"}] +[2026-05-03 09:14:18.632] [info] [cloud_service_client.cpp:869] [1942] Batch add files response: {"code":0,"data":true,"msg":"","traceId":"7ae77e93d16c27101b573658de8299c7"} +[2026-05-03 09:14:18.632] [info] [cloud_service_client.cpp:875] [1942] Batch add files to server success, size 1 +[2026-05-03 09:14:18.633] [info] [sql_database.cpp:120] [1942] Update SQL: UPDATE file_details SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:14:18.648] [info] [cloud_service_client.cpp:704] [1942] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 09:14:18.648] [info] [http_client.cpp:141] [1942] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777770857-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png +[2026-05-03 09:14:19.255] [info] [http_client.cpp:199] [1995] HTTP async request completed with status code: 200 +[2026-05-03 09:14:19.257] [info] [http_client.cpp:59] [1942] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777770857-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png attempt result: 0 +[2026-05-03 09:14:19.258] [info] [cloud_service_client.cpp:706] [1942] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770857-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011419Z&x-oss-expires=86400&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=ffb7e488b6a6ae3d8f41e497371dd1475f08325803e548f27e68b83e69a362b2","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770857-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011419Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=7581b3a310d16ff338b055705a16255e5527ea1c86fa38a0959ec192f05263d9","expireTime":1777772659,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/1777770857-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"},"msg":"","traceId":"a8f551feab46309e9a850b1c78ee1e30"} +[2026-05-03 09:14:19.258] [info] [http_client.cpp:306] [1942] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770857-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011419Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=7581b3a310d16ff338b055705a16255e5527ea1c86fa38a0959ec192f05263d9 +[2026-05-03 09:14:19.721] [info] [record_manager.cpp:1407] [1942] Uploading src_nameF01CFFQQFN55YKS/thumbnail/1777770857-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png thumbnail for file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode to F01CFFQQFN55YKS/thumbnail/1777770857-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png +[2026-05-03 09:14:19.721] [info] [record_manager.cpp:1348] [1942] Retrying 0 sync for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:14:19.722] [info] [cloud_service_client.cpp:885] [1942] Modify file info request: {"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/1777770857-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"} +[2026-05-03 09:14:20.005] [info] [cloud_service_client.cpp:888] [1942] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"3bf31ccef98a4d8d6d2e64088be49fed"} +[2026-05-03 09:14:20.005] [info] [sql_database.cpp:120] [1942] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:14:20.023] [info] [sql_database.cpp:685] [1942] Set upload flag for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:14:21.412] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:4337.27800000038,last_temp:42.777936076067874,temp:42.777936076067874,target_temp:0,smoothed_temp:42.790552251444105 +[2026-05-03 09:15:15.766] [info] [heater_bed.cpp:57] [1932] cmd_M140 temp 0 wait false +[2026-05-03 09:15:15.767] [info] [heaters.cpp:1066] [1932] __func__:set_temperature,temp:0,wait:false +[2026-05-03 09:15:15.767] [info] [idle_timeout.cpp:294] [1932] Device idle, activating heated bed protection. +[2026-05-03 09:15:24.053] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"script":"set_status","status":11,"sub_status":3000} +[2026-05-03 09:15:24.055] [info] [device_ui_message_handle.cpp:535] [1932] Setting status: 11, sub_status: 3000 +[2026-05-03 09:15:24.057] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:15:24.058] [info] [webhooks.cpp:170] [1932] return total: {"id":58,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:15:24.284] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"action":"add","files":["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"],"script":"file_manager"} +[2026-05-03 09:15:24.286] [info] [sql_database.cpp:164] [1942] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:15:24.289] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"file_manager"} +[2026-05-03 09:15:24.290] [info] [webhooks.cpp:170] [1932] return total: {"id":59,"method":"sync_info","result":{"script":"file_manager"}} +[2026-05-03 09:15:24.293] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"script":"set_status","status":11,"sub_status":3001} +[2026-05-03 09:15:24.298] [info] [device_ui_message_handle.cpp:535] [1932] Setting status: 11, sub_status: 3001 +[2026-05-03 09:15:24.305] [info] [sql_database.cpp:164] [1942] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:15:24.309] [info] [device_status.cpp:1483] [1932] Device status change to: 1, last status: 11 +[2026-05-03 09:15:24.311] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:15:24.312] [info] [webhooks.cpp:170] [1932] return total: {"id":60,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:15:24.343] [info] [http_client.cpp:23] [1942] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch-delete, msg: ["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"] +[2026-05-03 09:15:24.771] [info] [cloud_service_client.cpp:909] [1942] Delete file response: {"code":0,"data":true,"msg":"","traceId":"429677ed7112f7a41c5eb6abbefa97d6"} +[2026-05-03 09:15:24.771] [info] [record_manager.cpp:1032] [1942] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode marked for deletion on server later, upload_flag: 0 +[2026-05-03 09:15:24.771] [info] [record_manager.cpp:496] [1942] Parsing local file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:15:24.772] [info] [record_manager.cpp:40] [1942] GcodeParser open file: /opt/usr/gcode/local//IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:15:24.775] [info] [record_manager.cpp:383] [1942] color map size: 1 +[2026-05-03 09:15:24.776] [info] [sql_database.cpp:97] [1942] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:15:24.789] [info] [sql_database.cpp:97] [1942] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-05-03 09:15:24.803] [info] [record_manager.cpp:512] [1942] Parsed file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode, size: 1111049, layer: 50, print_time: 519, total_filament_used: 2.67, color_map size: 1 +[2026-05-03 09:15:24.804] [info] [record_manager.cpp:1191] [1942] Syncing 1 files to server retry 0 +[2026-05-03 09:15:24.804] [info] [cloud_service_client.cpp:862] [1942] Batch adding files to server... +[2026-05-03 09:15:24.804] [info] [http_client.cpp:23] [1942] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch, msg: [{"colorMap":[{"color":"#26A69A","t":0,"type":"PLA"}],"createTime":1777770924,"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","lastPrintTime":0,"layer":50,"printTime":519,"size":1111049,"totalFilamentUsed":2.67,"totalPrintTimes":0,"type":"file"}] +[2026-05-03 09:15:25.084] [info] [cloud_service_client.cpp:869] [1942] Batch add files response: {"code":0,"data":true,"msg":"","traceId":"96506dcd3b26f9362e872646c3c03238"} +[2026-05-03 09:15:25.084] [info] [cloud_service_client.cpp:875] [1942] Batch add files to server success, size 1 +[2026-05-03 09:15:25.084] [info] [sql_database.cpp:120] [1942] Update SQL: UPDATE file_details SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:15:25.099] [info] [cloud_service_client.cpp:704] [1942] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 09:15:25.099] [info] [http_client.cpp:141] [1942] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777770924-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png +[2026-05-03 09:15:25.274] [info] [http_client.cpp:199] [1995] HTTP async request completed with status code: 200 +[2026-05-03 09:15:25.275] [info] [http_client.cpp:59] [1942] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777770924-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png attempt result: 0 +[2026-05-03 09:15:25.276] [info] [cloud_service_client.cpp:706] [1942] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770924-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011525Z&x-oss-expires=86400&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=24c3291b52c1e50169afb53c2d85e014053ec18b66a2d8a69f6bdd6a324cc212","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770924-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011525Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=2284cf7b1b09cb375a8e3bf5d865794ef35b51c4074dcf331f04aaf7b09ad034","expireTime":1777772725,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/1777770924-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"},"msg":"","traceId":"b07891a67150c319d41d9a12fce684c9"} +[2026-05-03 09:15:25.277] [info] [http_client.cpp:306] [1942] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777770924-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T011525Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=2284cf7b1b09cb375a8e3bf5d865794ef35b51c4074dcf331f04aaf7b09ad034 +[2026-05-03 09:15:25.710] [info] [record_manager.cpp:1407] [1942] Uploading src_nameF01CFFQQFN55YKS/thumbnail/1777770924-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png thumbnail for file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode to F01CFFQQFN55YKS/thumbnail/1777770924-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png +[2026-05-03 09:15:25.711] [info] [record_manager.cpp:1348] [1942] Retrying 0 sync for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:15:25.711] [info] [cloud_service_client.cpp:885] [1942] Modify file info request: {"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/1777770924-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"} +[2026-05-03 09:15:25.998] [info] [cloud_service_client.cpp:888] [1942] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"42d26ed55c2c372415d098736340ed13"} +[2026-05-03 09:15:25.998] [info] [sql_database.cpp:120] [1942] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:15:26.010] [info] [sql_database.cpp:685] [1942] Set upload flag for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:16:10.636] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:4446.502341393971,last_temp:42.63315898460718,temp:42.63315898460718,target_temp:0,smoothed_temp:42.52209432407333 +[2026-05-03 09:16:21.912] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:4457.77800000038,last_temp:41.53141458945379,temp:41.53141458945379,target_temp:0,smoothed_temp:41.52914308173484 +[2026-05-03 09:17:17.280] [info] [device_ui_message_handle.cpp:303] [1932] Get Network access cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[2026-05-03 09:17:17.281] [info] [webhooks.cpp:744] [1932] return handle_get_network_access_cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[2026-05-03 09:17:17.282] [info] [webhooks.cpp:170] [1932] return total: {"id":61,"method":"get_network_access_cfg","result":{"object":{"lan_status":false,"token":"miM2yt","token_status":true}}} +[2026-05-03 09:17:22.663] [info] [clocksync.cpp:212] [1984] mcu 'mcu': Ignoring clock sample: sent_time=4544.433706708,time_avg=4514.896100862426,freq=23999999.4324963,diff=17596.728317260742(0.0007331970132191975),stddev=113.81168895473209 +[2026-05-03 09:17:22.663] [info] [clocksync.cpp:212] [1987] mcu 'bed_sensor': Ignoring clock sample: sent_time=4544.433988916,time_avg=4514.89635288358,freq=119998365.47547807,diff=67910.92083740234(0.0005659243403116862),stddev=1788.5957656749504 +[2026-05-03 09:18:10.639] [info] [heaters.cpp:405] [1989] __func__:temperature_callback,heater_name:extruder,read_time:4566.504436337199,last_temp:41.75625009771517,temp:41.75625009771517,target_temp:0,smoothed_temp:41.70176944712513 +[2026-05-03 09:18:22.411] [info] [heaters.cpp:405] [1984] __func__:temperature_callback,heater_name:heater_bed,read_time:4578.27800000038,last_temp:40.24525427741116,temp:40.24525427741116,target_temp:0,smoothed_temp:40.27289601502026 +[2026-05-03 09:19:08.373] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":1,"script":"upgrade"} +[2026-05-03 09:19:08.379] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:08.380] [info] [webhooks.cpp:170] [1932] return total: {"id":62,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:08.730] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":2,"script":"upgrade"} +[2026-05-03 09:19:08.735] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:08.736] [info] [webhooks.cpp:170] [1932] return total: {"id":63,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:09.245] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":3,"script":"upgrade"} +[2026-05-03 09:19:09.248] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:09.249] [info] [webhooks.cpp:170] [1932] return total: {"id":64,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:09.571] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":4,"script":"upgrade"} +[2026-05-03 09:19:09.575] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:09.576] [info] [webhooks.cpp:170] [1932] return total: {"id":65,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:09.915] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":5,"script":"upgrade"} +[2026-05-03 09:19:09.917] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:09.917] [info] [webhooks.cpp:170] [1932] return total: {"id":66,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:10.402] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":6,"script":"upgrade"} +[2026-05-03 09:19:10.406] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:10.407] [info] [webhooks.cpp:170] [1932] return total: {"id":67,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:10.759] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":7,"script":"upgrade"} +[2026-05-03 09:19:10.763] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:10.764] [info] [webhooks.cpp:170] [1932] return total: {"id":68,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:11.124] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":8,"script":"upgrade"} +[2026-05-03 09:19:11.132] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:11.134] [info] [webhooks.cpp:170] [1932] return total: {"id":69,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:11.603] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":9,"script":"upgrade"} +[2026-05-03 09:19:11.606] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:11.608] [info] [webhooks.cpp:170] [1932] return total: {"id":70,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:11.960] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":10,"script":"upgrade"} +[2026-05-03 09:19:11.964] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:11.966] [info] [webhooks.cpp:170] [1932] return total: {"id":71,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:12.451] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":11,"script":"upgrade"} +[2026-05-03 09:19:12.455] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:12.456] [info] [webhooks.cpp:170] [1932] return total: {"id":72,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:12.803] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":12,"script":"upgrade"} +[2026-05-03 09:19:12.806] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:12.807] [info] [webhooks.cpp:170] [1932] return total: {"id":73,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:13.167] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":13,"script":"upgrade"} +[2026-05-03 09:19:13.172] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:13.173] [info] [webhooks.cpp:170] [1932] return total: {"id":74,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:13.531] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":14,"script":"upgrade"} +[2026-05-03 09:19:13.536] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:13.537] [info] [webhooks.cpp:170] [1932] return total: {"id":75,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:14.005] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":15,"script":"upgrade"} +[2026-05-03 09:19:14.012] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:14.013] [info] [webhooks.cpp:170] [1932] return total: {"id":76,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:14.368] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":16,"script":"upgrade"} +[2026-05-03 09:19:14.371] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:14.372] [info] [webhooks.cpp:170] [1932] return total: {"id":77,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:14.832] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":17,"script":"upgrade"} +[2026-05-03 09:19:14.839] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:14.853] [info] [webhooks.cpp:170] [1932] return total: {"id":78,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:15.200] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":18,"script":"upgrade"} +[2026-05-03 09:19:15.203] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:15.204] [info] [webhooks.cpp:170] [1932] return total: {"id":79,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:15.557] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":19,"script":"upgrade"} +[2026-05-03 09:19:15.561] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:15.562] [info] [webhooks.cpp:170] [1932] return total: {"id":80,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:15.800] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":20,"script":"upgrade"} +[2026-05-03 09:19:15.803] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:15.804] [info] [webhooks.cpp:170] [1932] return total: {"id":81,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:16.160] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":21,"script":"upgrade"} +[2026-05-03 09:19:16.165] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:16.165] [info] [webhooks.cpp:170] [1932] return total: {"id":82,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:16.633] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":22,"script":"upgrade"} +[2026-05-03 09:19:16.636] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:16.637] [info] [webhooks.cpp:170] [1932] return total: {"id":83,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:16.991] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":23,"script":"upgrade"} +[2026-05-03 09:19:16.994] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:16.994] [info] [webhooks.cpp:170] [1932] return total: {"id":84,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:17.470] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":24,"script":"upgrade"} +[2026-05-03 09:19:17.473] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:17.473] [info] [webhooks.cpp:170] [1932] return total: {"id":85,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:17.822] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":25,"script":"upgrade"} +[2026-05-03 09:19:17.824] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:17.824] [info] [webhooks.cpp:170] [1932] return total: {"id":86,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:18.400] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":26,"script":"upgrade"} +[2026-05-03 09:19:18.402] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:18.403] [info] [webhooks.cpp:170] [1932] return total: {"id":87,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:18.888] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":27,"script":"upgrade"} +[2026-05-03 09:19:18.891] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:18.891] [info] [webhooks.cpp:170] [1932] return total: {"id":88,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:19.251] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":28,"script":"upgrade"} +[2026-05-03 09:19:19.253] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:19.253] [info] [webhooks.cpp:170] [1932] return total: {"id":89,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:19.629] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":29,"script":"upgrade"} +[2026-05-03 09:19:19.631] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:19.632] [info] [webhooks.cpp:170] [1932] return total: {"id":90,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:20.096] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":30,"script":"upgrade"} +[2026-05-03 09:19:20.101] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:20.102] [info] [webhooks.cpp:170] [1932] return total: {"id":91,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:20.453] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":31,"script":"upgrade"} +[2026-05-03 09:19:20.459] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:20.460] [info] [webhooks.cpp:170] [1932] return total: {"id":92,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:20.814] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":32,"script":"upgrade"} +[2026-05-03 09:19:20.817] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:20.818] [info] [webhooks.cpp:170] [1932] return total: {"id":93,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:21.295] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":33,"script":"upgrade"} +[2026-05-03 09:19:21.298] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:21.299] [info] [webhooks.cpp:170] [1932] return total: {"id":94,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:21.659] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":34,"script":"upgrade"} +[2026-05-03 09:19:21.663] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:21.663] [info] [webhooks.cpp:170] [1932] return total: {"id":95,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:22.015] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":35,"script":"upgrade"} +[2026-05-03 09:19:22.020] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:22.021] [info] [webhooks.cpp:170] [1932] return total: {"id":96,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:22.497] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":36,"script":"upgrade"} +[2026-05-03 09:19:22.502] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:22.502] [info] [webhooks.cpp:170] [1932] return total: {"id":97,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:22.862] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":37,"script":"upgrade"} +[2026-05-03 09:19:22.868] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:22.869] [info] [webhooks.cpp:170] [1932] return total: {"id":98,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:23.093] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":38,"script":"upgrade"} +[2026-05-03 09:19:23.097] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:23.097] [info] [webhooks.cpp:170] [1932] return total: {"id":99,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:23.447] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":39,"script":"upgrade"} +[2026-05-03 09:19:23.453] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:23.454] [info] [webhooks.cpp:170] [1932] return total: {"id":100,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:23.934] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":40,"script":"upgrade"} +[2026-05-03 09:19:23.940] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:23.941] [info] [webhooks.cpp:170] [1932] return total: {"id":101,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:24.288] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":41,"script":"upgrade"} +[2026-05-03 09:19:24.291] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:24.292] [info] [webhooks.cpp:170] [1932] return total: {"id":102,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:24.682] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":42,"script":"upgrade"} +[2026-05-03 09:19:24.685] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:24.687] [info] [webhooks.cpp:170] [1932] return total: {"id":103,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:25.121] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":43,"script":"upgrade"} +[2026-05-03 09:19:25.128] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:25.128] [info] [webhooks.cpp:170] [1932] return total: {"id":104,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:25.474] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":44,"script":"upgrade"} +[2026-05-03 09:19:25.485] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:25.486] [info] [webhooks.cpp:170] [1932] return total: {"id":105,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:26.075] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":45,"script":"upgrade"} +[2026-05-03 09:19:26.078] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:26.079] [info] [webhooks.cpp:170] [1932] return total: {"id":106,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:26.311] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":46,"script":"upgrade"} +[2026-05-03 09:19:26.314] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:26.314] [info] [webhooks.cpp:170] [1932] return total: {"id":107,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:26.676] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":47,"script":"upgrade"} +[2026-05-03 09:19:26.681] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:26.682] [info] [webhooks.cpp:170] [1932] return total: {"id":108,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:27.163] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":48,"script":"upgrade"} +[2026-05-03 09:19:27.167] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:27.168] [info] [webhooks.cpp:170] [1932] return total: {"id":109,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:27.514] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":49,"script":"upgrade"} +[2026-05-03 09:19:27.518] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:27.519] [info] [webhooks.cpp:170] [1932] return total: {"id":110,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:30.123] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":50,"script":"upgrade"} +[2026-05-03 09:19:30.124] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:30.124] [info] [webhooks.cpp:170] [1932] return total: {"id":111,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:35.876] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":51,"script":"upgrade"} +[2026-05-03 09:19:35.878] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:35.881] [info] [webhooks.cpp:170] [1932] return total: {"id":112,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:36.233] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":52,"script":"upgrade"} +[2026-05-03 09:19:36.235] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:36.235] [info] [webhooks.cpp:170] [1932] return total: {"id":113,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:36.581] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":53,"script":"upgrade"} +[2026-05-03 09:19:36.582] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:36.582] [info] [webhooks.cpp:170] [1932] return total: {"id":114,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:37.049] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":54,"script":"upgrade"} +[2026-05-03 09:19:37.052] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:37.052] [info] [webhooks.cpp:170] [1932] return total: {"id":115,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:37.279] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":55,"script":"upgrade"} +[2026-05-03 09:19:37.283] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:37.284] [info] [webhooks.cpp:170] [1932] return total: {"id":116,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:37.755] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":56,"script":"upgrade"} +[2026-05-03 09:19:37.756] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:37.756] [info] [webhooks.cpp:170] [1932] return total: {"id":117,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:38.088] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":57,"script":"upgrade"} +[2026-05-03 09:19:38.090] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:38.091] [info] [webhooks.cpp:170] [1932] return total: {"id":118,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:38.438] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":58,"script":"upgrade"} +[2026-05-03 09:19:38.440] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:38.441] [info] [webhooks.cpp:170] [1932] return total: {"id":119,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:38.798] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":59,"script":"upgrade"} +[2026-05-03 09:19:38.800] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:38.801] [info] [webhooks.cpp:170] [1932] return total: {"id":120,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:39.263] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":60,"script":"upgrade"} +[2026-05-03 09:19:39.265] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:39.265] [info] [webhooks.cpp:170] [1932] return total: {"id":121,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:39.588] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":61,"script":"upgrade"} +[2026-05-03 09:19:39.590] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:39.590] [info] [webhooks.cpp:170] [1932] return total: {"id":122,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:40.172] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":62,"script":"upgrade"} +[2026-05-03 09:19:40.174] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:40.175] [info] [webhooks.cpp:170] [1932] return total: {"id":123,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:40.627] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":63,"script":"upgrade"} +[2026-05-03 09:19:40.629] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:40.630] [info] [webhooks.cpp:170] [1932] return total: {"id":124,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:41.429] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":64,"script":"upgrade"} +[2026-05-03 09:19:41.430] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:41.430] [info] [webhooks.cpp:170] [1932] return total: {"id":125,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:42.131] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":65,"script":"upgrade"} +[2026-05-03 09:19:42.132] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:42.133] [info] [webhooks.cpp:170] [1932] return total: {"id":126,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:42.939] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":66,"script":"upgrade"} +[2026-05-03 09:19:42.940] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:42.940] [info] [webhooks.cpp:170] [1932] return total: {"id":127,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:43.633] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":67,"script":"upgrade"} +[2026-05-03 09:19:43.635] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:43.635] [info] [webhooks.cpp:170] [1932] return total: {"id":128,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:44.433] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":68,"script":"upgrade"} +[2026-05-03 09:19:44.435] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:44.436] [info] [webhooks.cpp:170] [1932] return total: {"id":129,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:45.348] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":69,"script":"upgrade"} +[2026-05-03 09:19:45.351] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:45.352] [info] [webhooks.cpp:170] [1932] return total: {"id":130,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:46.033] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":70,"script":"upgrade"} +[2026-05-03 09:19:46.034] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:46.034] [info] [webhooks.cpp:170] [1932] return total: {"id":131,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:46.836] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":71,"script":"upgrade"} +[2026-05-03 09:19:46.838] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:46.838] [info] [webhooks.cpp:170] [1932] return total: {"id":132,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:47.523] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":72,"script":"upgrade"} +[2026-05-03 09:19:47.526] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:47.527] [info] [webhooks.cpp:170] [1932] return total: {"id":133,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:48.321] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":73,"script":"upgrade"} +[2026-05-03 09:19:48.324] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:48.324] [info] [webhooks.cpp:170] [1932] return total: {"id":134,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:49.012] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":74,"script":"upgrade"} +[2026-05-03 09:19:49.013] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:49.013] [info] [webhooks.cpp:170] [1932] return total: {"id":135,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:49.694] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":75,"script":"upgrade"} +[2026-05-03 09:19:49.697] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:49.698] [info] [webhooks.cpp:170] [1932] return total: {"id":136,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:52.741] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":77,"script":"upgrade"} +[2026-05-03 09:19:52.746] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:52.747] [info] [webhooks.cpp:170] [1932] return total: {"id":137,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:52.856] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":80,"script":"upgrade"} +[2026-05-03 09:19:52.857] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:52.858] [info] [webhooks.cpp:170] [1932] return total: {"id":138,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:53.084] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":82,"script":"upgrade"} +[2026-05-03 09:19:53.086] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:53.086] [info] [webhooks.cpp:170] [1932] return total: {"id":139,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:53.310] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":83,"script":"upgrade"} +[2026-05-03 09:19:53.315] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:53.315] [info] [webhooks.cpp:170] [1932] return total: {"id":140,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:53.423] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":84,"script":"upgrade"} +[2026-05-03 09:19:53.425] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:53.425] [info] [webhooks.cpp:170] [1932] return total: {"id":141,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:53.978] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":85,"script":"upgrade"} +[2026-05-03 09:19:53.980] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:53.981] [info] [webhooks.cpp:170] [1932] return total: {"id":142,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:56.778] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":86,"script":"upgrade"} +[2026-05-03 09:19:56.782] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:56.782] [info] [webhooks.cpp:170] [1932] return total: {"id":143,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:19:58.703] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":87,"script":"upgrade"} +[2026-05-03 09:19:58.704] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:19:58.704] [info] [webhooks.cpp:170] [1932] return total: {"id":144,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:20:01.520] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":88,"script":"upgrade"} +[2026-05-03 09:20:01.521] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:20:01.521] [info] [webhooks.cpp:170] [1932] return total: {"id":145,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:20:02.237] [info] [clocksync.cpp:199] [1989] mcu 'toolhead': New minimum RTT: sent_time=4704.009313534,half_rtt=0.00024518749978597043,freq=119997911.48478645 +[2026-05-03 09:20:04.125] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":89,"script":"upgrade"} +[2026-05-03 09:20:04.127] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:20:04.127] [info] [webhooks.cpp:170] [1932] return total: {"id":146,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:20:06.511] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":90,"script":"upgrade"} +[2026-05-03 09:20:06.516] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:20:06.518] [info] [webhooks.cpp:170] [1932] return total: {"id":147,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:20:06.620] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":94,"script":"upgrade"} +[2026-05-03 09:20:06.622] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:20:06.622] [info] [webhooks.cpp:170] [1932] return total: {"id":148,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:20:06.737] [info] [device_ui_message_handle.cpp:47] [1932] Handling sync info request {"progress":100,"script":"upgrade"} +[2026-05-03 09:20:06.740] [info] [webhooks.cpp:787] [1932] return handle_sync_info: {"script":"upgrade"} +[2026-05-03 09:20:06.740] [info] [webhooks.cpp:170] [1932] return total: {"id":149,"method":"sync_info","result":{"script":"upgrade"}} +[2026-05-03 09:20:09.712] [info] [gcode.cpp:559] [1932] Unknown command: UPDATE_NET_STATUS +[2026-05-03 09:20:09.715] [info] [webhooks.cpp:170] [1932] return total: {"id":150,"result":{}} +[2026-05-03 09:20:09.905] [info] [gcode.cpp:559] [1932] Unknown command: UPDATE_NET_STATUS +[2026-05-03 09:20:09.906] [info] [webhooks.cpp:170] [1932] return total: {"id":151,"result":{}} +[2026-05-03 09:20:10.248] [info] [webhooks.cpp:56] [1932] webhooks client 18392972: Disconnected +[2026-05-03 09:21:00.670] [info] [logger.cpp:80] [2110] elegoo log init finish! +[2026-05-03 09:21:00.748] [info] [main.cpp:209] [2110] inputtty:./config/printer,gcode_fd:5 +[2026-05-03 09:21:00.908] [info] [main.cpp:226] [2110] Starting Elegoo... +[2026-05-03 09:21:00.908] [info] [main.cpp:228] [2110] start_args.size:17,sizeof(long_options):9 +[2026-05-03 09:21:00.908] [info] [main.cpp:231] [2110] start_args[img_version]:00.00.00.00 +[2026-05-03 09:21:00.908] [info] [main.cpp:231] [2110] start_args[gui_version]:01.01.11.03 +[2026-05-03 09:21:00.908] [info] [main.cpp:231] [2110] start_args[elegoo_version]:03.26.17.07 +[2026-05-03 09:21:00.908] [info] [main.cpp:231] [2110] start_args[camera_version]:00.00.00.00 +[2026-05-03 09:21:00.908] [info] [main.cpp:231] [2110] start_args[canvas_version]:00.00.00.00 +[2026-05-03 09:21:00.908] [info] [main.cpp:231] [2110] start_args[ota_version]:01.03.02.36 +[2026-05-03 09:21:00.908] [info] [main.cpp:231] [2110] start_args[bed_sensor_version]:00.00.00.00 +[2026-05-03 09:21:00.908] [info] [main.cpp:231] [2110] start_args[start_reason]:startup +[2026-05-03 09:21:00.908] [info] [main.cpp:231] [2110] start_args[apiserver]:/tmp/elegoo_uds +[2026-05-03 09:21:00.908] [info] [main.cpp:231] [2110] start_args[toolhead_gd32_version]:00.00.00.00 +[2026-05-03 09:21:00.908] [info] [main.cpp:231] [2110] start_args[autosave_file]:/opt/usr/cfg/autosave.cfg +[2026-05-03 09:21:00.908] [info] [main.cpp:231] [2110] start_args[gcode_fd]:5 +[2026-05-03 09:21:00.908] [info] [main.cpp:231] [2110] start_args[config_file]:/opt/inst/printer_dsp.cfg +[2026-05-03 09:21:00.908] [info] [main.cpp:231] [2110] start_args[cpu_info]:2 core ARMv7 Processor rev 5 (v7l) +[2026-05-03 09:21:00.908] [info] [main.cpp:231] [2110] start_args[mcu_gd32_version]:00.00.00.00 +[2026-05-03 09:21:00.909] [info] [main.cpp:231] [2110] start_args[machine_model]:Centauri Carbon 2 +[2026-05-03 09:21:00.909] [info] [main.cpp:231] [2110] start_args[os_version]:01.02.12.01 +[2026-05-03 09:21:00.909] [info] [main.cpp:236] [2110] long_options[debuginput]:i +[2026-05-03 09:21:00.909] [info] [main.cpp:236] [2110] long_options[input-tty]:I +[2026-05-03 09:21:00.909] [info] [main.cpp:236] [2110] long_options[api-server]:a +[2026-05-03 09:21:00.909] [info] [main.cpp:236] [2110] long_options[logfile]:l +[2026-05-03 09:21:00.909] [info] [main.cpp:236] [2110] long_options[verbose]:v +[2026-05-03 09:21:00.909] [info] [main.cpp:236] [2110] long_options[debugoutput]:o +[2026-05-03 09:21:00.909] [info] [main.cpp:236] [2110] long_options[dictionary]:d +[2026-05-03 09:21:00.909] [info] [main.cpp:236] [2110] long_options[import-test]:t +[2026-05-03 09:21:00.909] [info] [printer.cpp:50] [2110] create Printer success! +[2026-05-03 09:21:00.910] [info] [printer.cpp:366] [2110] connect begin! +[2026-05-03 09:21:00.910] [info] [printer.cpp:284] [2110] read_config begin! +[2026-05-03 09:21:00.914] [info] [gcode.cpp:1927] [2117] create DeviceStatusWorker success!! +[2026-05-03 09:21:00.980] [info] [webhooks.cpp:607] [2110] create WebHooks success! +[2026-05-03 09:21:00.980] [info] [webhooks.cpp:384] [2110] create ServerSocket success! /tmp/elegoo_uds +[2026-05-03 09:21:00.980] [info] [webhooks.cpp:443] [2110] create ServerSocket success! +[2026-05-03 09:21:00.981] [info] [webhooks.cpp:1317] [2119] create DeviceExceptWorker success!! +[2026-05-03 09:21:01.276] [info] [config_manager.cpp:171] [2110] begin read sn info +[2026-05-03 09:21:01.277] [info] [config_manager.cpp:205] [2110] read product auth success, sn: F01CFFQQFN55YKS +[2026-05-03 09:21:01.279] [info] [config_manager.cpp:148] [2110] machine: {"machine":{"model":"Centauri Carbon 2"},"versions":[{"os_version":"01.02.12.01"},{"mcu_gd32_version":"00.00.00.00"},{"toolhead_gd32_version":"00.00.00.00"},{"bed_sensor_version":"00.00.00.00"},{"canvas_version":"00.00.00.00"},{"camera_version":"00.00.00.00"},{"elegoo_version":"03.26.17.07"},{"gui_version":"01.01.11.03"},{"ota_version":"01.03.02.36"},{"img_version":"00.00.00.00"}]} +[2026-05-03 09:21:01.279] [info] [config_manager.cpp:209] [2110] begin read supplement info +[2026-05-03 09:21:01.282] [info] [config_manager.cpp:306] [2110] token info: token: miM2yt, token_switch_enabled: true, is_lan_mode: false, power_outage_resume_enabled: true, region: 1 +[2026-05-03 09:21:01.284] [info] [config_manager.cpp:453] [2110] load persistent supplement info success +[2026-05-03 09:21:01.285] [info] [device_status.cpp:133] [2110] Create component manager for Centauri Carbon 2 +[2026-05-03 09:21:01.506] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_details WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_details GROUP BY filename HAVING MAX(create_time)); +[2026-05-03 09:21:01.509] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_thumbnail WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_thumbnail GROUP BY filename); +[2026-05-03 09:21:01.520] [info] [record_manager.cpp:302] [2110] Loaded 1 tasks from the database. +[2026-05-03 09:21:01.520] [info] [record_manager.cpp:307] [2110] end task info id 9052df81-606e-47e9-ab30-68836972683f name ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode status 1. +[2026-05-03 09:21:01.522] [info] [record_manager.cpp:318] [2110] Loaded 9 files from the database. +[2026-05-03 09:21:01.524] [info] [record_manager.cpp:323] [2110] Loaded 9 thumbnails from the database. +[2026-05-03 09:21:01.525] [info] [record_manager.cpp:328] [2110] Loaded 0 delete file records from the database. +[2026-05-03 09:21:01.526] [info] [sql_database.cpp:417] [2110] Loaded exception message: id 4, code 1263 +[2026-05-03 09:21:01.526] [info] [sql_database.cpp:417] [2110] Loaded exception message: id 3, code 1263 +[2026-05-03 09:21:01.526] [info] [sql_database.cpp:417] [2110] Loaded exception message: id 2, code 801 +[2026-05-03 09:21:01.527] [info] [sql_database.cpp:417] [2110] Loaded exception message: id 1, code 801 +[2026-05-03 09:21:01.527] [info] [record_manager.cpp:333] [2110] Loaded 4 exception messages from the database. +[2026-05-03 09:21:01.530] [info] [record_manager.cpp:831] [2110] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-03 09:21:01.531] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:21:01.545] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:21:01.595] [info] [record_manager.cpp:344] [2110] check_db_files file[ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode] not exist system, clear it from database +[2026-05-03 09:21:01.599] [info] [record_manager.cpp:831] [2110] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-03 09:21:01.599] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:21:01.659] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:21:01.675] [info] [record_manager.cpp:344] [2110] check_db_files file[ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode] not exist system, clear it from database +[2026-05-03 09:21:01.676] [info] [record_manager.cpp:831] [2110] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 09:21:01.677] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:21:01.692] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:21:01.707] [info] [record_manager.cpp:344] [2110] check_db_files file[ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode] not exist system, clear it from database +[2026-05-03 09:21:01.708] [info] [record_manager.cpp:831] [2110] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-03 09:21:01.709] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:21:01.723] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:21:01.739] [info] [record_manager.cpp:344] [2110] check_db_files file[ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode] not exist system, clear it from database +[2026-05-03 09:21:01.741] [info] [record_manager.cpp:831] [2110] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-03 09:21:01.741] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:21:01.755] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:21:01.769] [info] [record_manager.cpp:344] [2110] check_db_files file[ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode] not exist system, clear it from database +[2026-05-03 09:21:01.770] [info] [record_manager.cpp:831] [2110] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-03 09:21:01.770] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:21:01.784] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:21:01.797] [info] [record_manager.cpp:344] [2110] check_db_files file[ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode] not exist system, clear it from database +[2026-05-03 09:21:01.798] [info] [record_manager.cpp:831] [2110] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-03 09:21:01.798] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:21:01.811] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:21:01.824] [info] [record_manager.cpp:344] [2110] check_db_files file[ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode] not exist system, clear it from database +[2026-05-03 09:21:01.826] [info] [record_manager.cpp:831] [2110] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-03 09:21:01.826] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:21:01.837] [info] [sql_database.cpp:164] [2110] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:21:01.851] [info] [record_manager.cpp:344] [2110] check_db_files file[ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode] not exist system, clear it from database +[2026-05-03 09:21:01.851] [info] [record_manager.cpp:827] [2110] File exists: /opt/usr/gcode/local/IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:21:01.852] [info] [record_manager.cpp:361] [2110] Local file count 9 does not match cached file details 1, need to parse online files. +[2026-05-03 09:21:01.852] [info] [record_manager.cpp:607] [2110] Parsing local files in /opt/usr/gcode/local/ +[2026-05-03 09:21:01.852] [info] [record_manager.cpp:496] [2110] Parsing local file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-03 09:21:01.852] [error] [record_manager.cpp:32] [2110] stat failed /opt/usr/gcode/local//ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-03 09:21:01.852] [info] [record_manager.cpp:383] [2110] color map size: 0 +[2026-05-03 09:21:01.853] [info] [sql_database.cpp:97] [2110] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:21:01.864] [info] [record_manager.cpp:512] [2110] Parsed file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 09:21:01.864] [info] [record_manager.cpp:496] [2110] Parsing local file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 09:21:01.865] [error] [record_manager.cpp:32] [2110] stat failed /opt/usr/gcode/local//ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 09:21:01.865] [info] [record_manager.cpp:383] [2110] color map size: 0 +[2026-05-03 09:21:01.865] [info] [sql_database.cpp:97] [2110] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:21:01.876] [info] [record_manager.cpp:512] [2110] Parsed file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 09:21:01.877] [info] [record_manager.cpp:496] [2110] Parsing local file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-03 09:21:01.877] [error] [record_manager.cpp:32] [2110] stat failed /opt/usr/gcode/local//ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-03 09:21:01.877] [info] [record_manager.cpp:383] [2110] color map size: 0 +[2026-05-03 09:21:01.877] [info] [sql_database.cpp:97] [2110] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:21:01.890] [info] [record_manager.cpp:512] [2110] Parsed file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 09:21:01.890] [info] [record_manager.cpp:496] [2110] Parsing local file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-03 09:21:01.891] [error] [record_manager.cpp:32] [2110] stat failed /opt/usr/gcode/local//ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-03 09:21:01.891] [info] [record_manager.cpp:383] [2110] color map size: 0 +[2026-05-03 09:21:01.891] [info] [sql_database.cpp:97] [2110] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:21:01.905] [info] [record_manager.cpp:512] [2110] Parsed file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 09:21:01.905] [info] [record_manager.cpp:496] [2110] Parsing local file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-03 09:21:01.905] [error] [record_manager.cpp:32] [2110] stat failed /opt/usr/gcode/local//ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-03 09:21:01.905] [info] [record_manager.cpp:383] [2110] color map size: 0 +[2026-05-03 09:21:01.905] [info] [sql_database.cpp:97] [2110] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:21:01.917] [info] [record_manager.cpp:512] [2110] Parsed file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 09:21:01.917] [info] [record_manager.cpp:496] [2110] Parsing local file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-03 09:21:01.917] [error] [record_manager.cpp:32] [2110] stat failed /opt/usr/gcode/local//ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-03 09:21:01.917] [info] [record_manager.cpp:383] [2110] color map size: 0 +[2026-05-03 09:21:01.917] [info] [sql_database.cpp:97] [2110] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:21:01.930] [info] [record_manager.cpp:512] [2110] Parsed file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 09:21:01.930] [info] [record_manager.cpp:496] [2110] Parsing local file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-03 09:21:01.931] [error] [record_manager.cpp:32] [2110] stat failed /opt/usr/gcode/local//ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-03 09:21:01.931] [info] [record_manager.cpp:383] [2110] color map size: 0 +[2026-05-03 09:21:01.931] [info] [sql_database.cpp:97] [2110] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:21:01.944] [info] [record_manager.cpp:512] [2110] Parsed file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 09:21:01.945] [info] [record_manager.cpp:623] [2110] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode already exists in cache, skipping parsing. +[2026-05-03 09:21:01.945] [info] [record_manager.cpp:496] [2110] Parsing local file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-03 09:21:01.945] [error] [record_manager.cpp:32] [2110] stat failed /opt/usr/gcode/local//ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-03 09:21:01.945] [info] [record_manager.cpp:383] [2110] color map size: 0 +[2026-05-03 09:21:01.945] [info] [sql_database.cpp:97] [2110] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:21:01.957] [info] [record_manager.cpp:512] [2110] Parsed file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 09:21:01.957] [info] [record_manager.cpp:636] [2110] Finished parsing local files, total: 9 +[2026-05-03 09:21:01.957] [info] [record_manager.cpp:365] [2110] RecordManager initialized successfully. +[2026-05-03 09:21:01.958] [info] [pins.cpp:112] [2110] create PrinterPins success! +[2026-05-03 09:21:01.988] [info] [msgproto.cpp:606] [2110] create MessageParser success! +[2026-05-03 09:21:01.988] [info] [mcu.cpp:1963] [2110] restart_via_remoterpc +[2026-05-03 09:21:01.988] [error] [serialhdl.cpp:309] [2110] SerialReader::disconnect() +[2026-05-03 09:21:01.988] [info] [dsp_helper.h:31] [2110] remoterpc_ctrl 0 +[2026-05-03 09:21:01.989] [info] [webhooks.cpp:56] [2110] webhooks client 35473716: New connection +[2026-05-03 09:21:01.996] [info] [webhooks.cpp:1232] [2110] handle_query is_subscribe true : {"canvas_dev":["fds","canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[2026-05-03 09:21:01.998] [info] [webhooks.cpp:1232] [2110] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[2026-05-03 09:21:01.998] [info] [device_ui_message_handle.cpp:65] [2110] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[2026-05-03 09:21:01.999] [info] [device_ui_message_handle.cpp:503] [2110] Total tasks: 1 +[2026-05-03 09:21:02.000] [info] [webhooks.cpp:799] [2110] return handle_sync_info: {"history_task_list":[{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":1} +[2026-05-03 09:21:02.000] [info] [webhooks.cpp:170] [2110] return total: {"id":5,"method":"sync_info","result":{"history_task_list":[{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":1}} +[2026-05-03 09:21:02.003] [warning] [webhooks.cpp:148] [2110] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 09:21:02.004] [info] [webhooks.cpp:170] [2110] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":7} +[2026-05-03 09:21:02.005] [info] [webhooks.cpp:170] [2110] return total: {"id":9,"result":{}} +[2026-05-03 09:21:02.006] [warning] [webhooks.cpp:148] [2110] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 09:21:02.007] [info] [webhooks.cpp:170] [2110] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":11} +[2026-05-03 09:21:02.007] [info] [device_ui_message_handle.cpp:255] [2110] Handling bind function request {"script":"get_device_info"} +[2026-05-03 09:21:02.008] [info] [webhooks.cpp:768] [2110] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-05-03 09:21:02.008] [info] [webhooks.cpp:170] [2110] return total: {"id":13,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-05-03 09:21:02.009] [info] [device_ui_message_handle.cpp:65] [2110] Handling sync info request {"region_code":1,"script":"set_region"} +[2026-05-03 09:21:02.010] [info] [device_ui_message_handle.cpp:129] [2110] Handling set region request 1 +[2026-05-03 09:21:02.010] [info] [device_ui_message_handle.cpp:132] [2110] Region is the same as current region: 1 +[2026-05-03 09:21:02.010] [info] [webhooks.cpp:799] [2110] return handle_sync_info: {"script":"set_region"} +[2026-05-03 09:21:02.010] [info] [webhooks.cpp:170] [2110] return total: {"id":15,"method":"sync_info","result":{"script":"set_region"}} +[2026-05-03 09:21:02.016] [info] [webhooks.cpp:170] [2110] return total: {"id":3,"result":{"eventtime":44.674570229,"status":null}} +[2026-05-03 09:21:02.018] [warning] [webhooks.cpp:148] [2110] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 09:21:02.018] [info] [webhooks.cpp:170] [2110] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":6} +[2026-05-03 09:21:02.019] [info] [device_ui_message_handle.cpp:321] [2110] Get Network access cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[2026-05-03 09:21:02.019] [info] [webhooks.cpp:756] [2110] return handle_get_network_access_cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[2026-05-03 09:21:02.020] [info] [webhooks.cpp:170] [2110] return total: {"id":10,"method":"get_network_access_cfg","result":{"object":{"lan_status":false,"token":"miM2yt","token_status":true}}} +[2026-05-03 09:21:02.021] [info] [device_ui_message_handle.cpp:65] [2110] Handling sync info request {"script":"get_device_status"} +[2026-05-03 09:21:02.021] [info] [device_ui_message_handle.cpp:143] [2110] Handling get device status request +[2026-05-03 09:21:02.022] [info] [device_ui_message_handle.cpp:154] [2110] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-03 09:21:02.023] [info] [webhooks.cpp:799] [2110] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-03 09:21:02.023] [info] [webhooks.cpp:170] [2110] return total: {"id":14,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[2026-05-03 09:21:02.025] [info] [webhooks.cpp:170] [2110] return total: {"id":4,"result":{"eventtime":44.674570229,"status":null}} +[2026-05-03 09:21:02.500] [warning] [webhooks.cpp:148] [2110] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 09:21:02.501] [info] [webhooks.cpp:170] [2110] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":8} +[2026-05-03 09:21:02.502] [info] [device_ui_message_handle.cpp:65] [2110] Handling sync info request {"script":"set_status","status":1,"sub_status":0} +[2026-05-03 09:21:02.502] [info] [device_ui_message_handle.cpp:553] [2110] Setting status: 1, sub_status: 0 +[2026-05-03 09:21:02.502] [info] [device_status.cpp:1204] [2110] Set UI ready: true +[2026-05-03 09:21:02.502] [info] [webhooks.cpp:799] [2110] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:21:02.503] [info] [webhooks.cpp:170] [2110] return total: {"id":16,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:21:02.990] [info] [dsp_helper.h:31] [2110] remoterpc_ctrl 1 +[2026-05-03 09:21:03.110] [warning] [webhooks.cpp:148] [2110] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 09:21:03.111] [info] [webhooks.cpp:170] [2110] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":12} +[2026-05-03 09:21:04.110] [info] [msgproto.cpp:606] [2110] create MessageParser success! +[2026-05-03 09:21:04.112] [info] [mcu.cpp:1049] [2110] MCU 'bed_sensor' restart power +[2026-05-03 09:21:04.523] [info] [mcu.cpp:1072] [2110] bootloader mode, try jump to app! +[2026-05-03 09:21:04.554] [info] [msgproto.cpp:606] [2110] create MessageParser success! +[2026-05-03 09:21:04.556] [info] [mcu.cpp:1049] [2110] MCU 'toolhead' restart power +[2026-05-03 09:21:04.967] [info] [mcu.cpp:1072] [2110] bootloader mode, try jump to app! +[2026-05-03 09:21:05.105] [info] [bed_mesh.cpp:1466] [2110] zero_ref_pos size 0 +[2026-05-03 09:21:05.159] [info] [bed_mesh.cpp:2722] [2110] ProfileManager profile->get_name bed_mesh +[2026-05-03 09:21:05.159] [info] [bed_mesh.cpp:2722] [2110] ProfileManager profile->get_name bed_mesh ADAPTIVE +[2026-05-03 09:21:05.159] [info] [bed_mesh.cpp:2722] [2110] ProfileManager profile->get_name bed_mesh default +[2026-05-03 09:21:05.201] [info] [gcode_move.cpp:60] [2110] GCodeMove init! +[2026-05-03 09:21:05.242] [info] [gcode_move.cpp:119] [2110] GCodeMove init success!! +[2026-05-03 09:21:05.243] [info] [gcode_move.cpp:274] [2110] set_move_transform transform: force:false +[2026-05-03 09:21:05.334] [info] [print_stats.cpp:26] [2110] PrintStats init! +[2026-05-03 09:21:05.335] [info] [print_stats.cpp:55] [2110] PrintStats init success!! +[2026-05-03 09:21:05.336] [info] [bed_mesh.cpp:463] [2110] update_status bed_mesh_exist:0x0100 +[2026-05-03 09:21:05.336] [info] [print_stats.cpp:277] [2110] bed_mesh_exist:0x0100 +[2026-05-03 09:21:05.336] [warning] [extras_factory.cpp:323] [2110] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-03 09:21:05.336] [warning] [extras_factory.cpp:323] [2110] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-03 09:21:05.390] [info] [beep_ctrl.cpp:39] [2110] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[2026-05-03 09:21:05.392] [info] [beep_ctrl.cpp:147] [2110] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[2026-05-03 09:21:05.393] [info] [beep_ctrl.cpp:262] [2110] exec_cmd data 0 +[2026-05-03 09:21:05.395] [info] [beep_ctrl.cpp:181] [2110] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[2026-05-03 09:21:05.395] [info] [beep_ctrl.cpp:262] [2110] exec_cmd data 333333 +[2026-05-03 09:21:05.396] [info] [beep_ctrl.cpp:199] [2110] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[2026-05-03 09:21:05.396] [info] [beep_ctrl.cpp:262] [2110] exec_cmd data 166666 +[2026-05-03 09:21:05.396] [info] [beep_ctrl.cpp:217] [2110] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[2026-05-03 09:21:05.396] [info] [beep_ctrl.cpp:262] [2110] exec_cmd data normal +[2026-05-03 09:21:05.429] [info] [query_adc.cpp:36] [2110] QueryADC init success! +[2026-05-03 09:21:05.431] [info] [mmu.cpp:1447] [2110] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[2026-05-03 09:21:05.431] [info] [mmu.cpp:1465] [2110] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[2026-05-03 09:21:05.460] [info] [cavity_fan.cpp:27] [2110] PrinterFanCavity init! +[2026-05-03 09:21:05.461] [info] [cavity_fan.cpp:85] [2110] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[2026-05-03 09:21:05.461] [info] [cavity_fan.cpp:96] [2110] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[2026-05-03 09:21:05.462] [info] [cavity_fan.cpp:104] [2110] temp_drop_det_time 60 5 120 1.5 180 +[2026-05-03 09:21:05.512] [info] [fan.cpp:55] [2110] __func__:Fan #1 str_pin:PD17 +[2026-05-03 09:21:05.513] [info] [cavity_fan.cpp:115] [2110] PrinterFanCavity init success!! +[2026-05-03 09:21:05.514] [info] [stepper_enable.cpp:27] [2110] PrinterStepperEnable init! +[2026-05-03 09:21:05.516] [info] [fan.cpp:55] [2110] __func__:Fan #1 str_pin:PG15 +[2026-05-03 09:21:05.547] [info] [fan.cpp:55] [2110] __func__:Fan #1 str_pin:toolhead:PA8 +[2026-05-03 09:21:05.549] [info] [fan.cpp:55] [2110] __func__:Fan #1 str_pin:PD15 +[2026-05-03 09:21:05.555] [info] [exclude_object.cpp:28] [2110] ExcludeObject init! +[2026-05-03 09:21:05.557] [info] [exclude_object.cpp:79] [2110] ExcludeObject init success! +[2026-05-03 09:21:05.563] [warning] [extras_factory.cpp:323] [2110] create extras: "g180_load_config" failer! +[2026-05-03 09:21:05.565] [info] [heater_bed.cpp:18] [2110] PrinterHeaterBed Init! +[2026-05-03 09:21:05.592] [info] [heaters.cpp:873] [2110] PrinterHeaters init! +[2026-05-03 09:21:05.594] [info] [heaters.cpp:898] [2110] PrinterHeaters init success! +[2026-05-03 09:21:05.630] [info] [heaters.cpp:935] [2110] c->get_name(): thermistor NTC 100K beta 3950 +[2026-05-03 09:21:05.631] [info] [thermistor.cpp:138] [2110] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[2026-05-03 09:21:05.631] [info] [heaters.cpp:935] [2110] c->get_name(): thermistor NTC 100K beta 3950 DSP +[2026-05-03 09:21:05.632] [info] [thermistor.cpp:138] [2110] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[2026-05-03 09:21:05.759] [info] [utilities.cpp:52] [2110] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[2026-05-03 09:21:05.760] [info] [thermistor.cpp:146] [2110] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[2026-05-03 09:21:05.761] [info] [heaters.cpp:935] [2110] c->get_name(): thermistor NTC 100K beta 4300 +[2026-05-03 09:21:05.761] [info] [thermistor.cpp:138] [2110] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[2026-05-03 09:21:05.762] [info] [heaters.cpp:935] [2110] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[2026-05-03 09:21:05.762] [info] [thermistor.cpp:138] [2110] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[2026-05-03 09:21:05.763] [info] [heaters.cpp:935] [2110] c->get_name(): thermistor NTC R25 350 +[2026-05-03 09:21:05.763] [info] [thermistor.cpp:138] [2110] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[2026-05-03 09:21:05.764] [info] [heaters.cpp:943] [2110] PrinterHeaters::load_config success! +[2026-05-03 09:21:05.764] [info] [heaters.cpp:1032] [2110] setup_sensor success! +[2026-05-03 09:21:05.764] [info] [adc_temperature.cpp:29] [2110] __func__:PrinterADCtoTemperature name:heater_bed +[2026-05-03 09:21:05.765] [info] [adc_temperature.cpp:35] [2110] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[2026-05-03 09:21:05.765] [info] [adc_temperature.cpp:165] [2110] name:heater_bed +[2026-05-03 09:21:05.766] [info] [error_mcu.cpp:101] [2110] create PrinterMCUError success! +[2026-05-03 09:21:05.767] [info] [heaters.cpp:83] [2110] Heater init! name: heater_bed +[2026-05-03 09:21:05.768] [info] [heaters.cpp:122] [2110] __func__:Heater,heater_pin:PG13 +[2026-05-03 09:21:05.769] [info] [pid_calibrate.cpp:43] [2110] PIDCalibrate init success!! +[2026-05-03 09:21:05.770] [warning] [heaters.cpp:329] [2110] Heater init success!!!! +[2026-05-03 09:21:05.771] [warning] [heaters.cpp:985] [2110] debug name heater_bed, gcode_id B +[2026-05-03 09:21:05.772] [info] [heater_bed.cpp:41] [2110] PrinterHeaterBed Init success! +[2026-05-03 09:21:05.772] [info] [heater_fan.cpp:24] [2110] PrinterHeaterFan init! +[2026-05-03 09:21:05.773] [info] [fan.cpp:55] [2110] __func__:Fan #1 str_pin:toolhead:PB13 +[2026-05-03 09:21:05.774] [info] [heater_fan.cpp:46] [2110] PrinterHeaterFan init success!! +[2026-05-03 09:21:05.778] [info] [idle_timeout.cpp:28] [2110] init IdleTimeout ... +[2026-05-03 09:21:05.779] [info] [idle_timeout.cpp:72] [2110] init IdleTimeout success !!! +[2026-05-03 09:21:05.811] [info] [bulk_sensor.cpp:312] [2110] unpack_fmt:mqtt_strategy_->is_valid(): true +[2026-05-03 09:21:11.334] [info] [device_ui_message_handle.cpp:374] [2168] report_error: {"id":0,"report":{"error_code":2002,"error_level":3,"message":"connect mqtt success"}} +[2026-05-03 09:21:11.334] [info] [timer_manager.cpp:72] [2168] Adding timer task: WanStrategy_sync_device_info, interval: 100 ms, repeat: false +[2026-05-03 09:21:11.335] [info] [device_status.cpp:1636] [2168] post_all_dev_message +[2026-05-03 09:21:11.339] [info] [device_status.cpp:1650] [2168] post_all_dev_message {"canvas_info":{"active_canvas_id":0,"active_tray_id":-1,"auto_refill":false,"canvas_list":[{"canvas_id":0,"connected":1,"tray_list":[{"brand":"Generic","filament_code":"0x0000","filament_color":"#000000","filament_name":"PLA","filament_type":"PLA","max_nozzle_temp":230,"min_nozzle_temp":190,"status":1,"tray_id":0},{"brand":"Generic","filament_code":"0x0000","filament_color":"#FFFFFF","filament_name":"PLA","filament_type":"PLA","max_nozzle_temp":230,"min_nozzle_temp":190,"status":1,"tray_id":1},{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":2},{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":3}]}]},"device_assistant":{"status":1},"external_device":{"camera":true,"type":"0303","u_disk":true},"extruder":{"filament_detect_enable":1,"filament_detected":0,"target":0,"temperature":41},"fans":{"aux_fan":{"speed":0.0},"box_fan":{"speed":0.0},"controller_fan":{"speed":0.0},"fan":{"speed":0.0},"heater_fan":{"speed":0.0}},"foreign_object_detection":{"status":0},"gcode_move":{"extruder":0.0,"speed":1500,"speed_mode":1,"x":5.0,"y":5.0,"z":-0.119271},"heater_bed":{"target":0,"temperature":38},"led":{"status":1},"machine_status":{"exception_status":[],"progress":0,"status":1,"sub_status":0,"sub_status_reason_code":0},"mono_filament_info":{"brand":"","filament_code":"","filament_color":"","filament_name":"","filament_type":"","max_nozzle_temp":0,"min_nozzle_temp":0,"status":0,"tray_id":0},"print_status":{"bed_mesh_detect":false,"current_layer":0,"enable":false,"filament_detect":false,"filename":"","print_duration":0,"remaining_time_sec":0,"state":"","total_duration":0,"uuid":""},"spaghetti_detection":{"frequency":"medium","handing":"pause","status":0},"tool_head":{"homed_axes":""},"ztemperature_sensor":{"measured_max_temperature":0,"measured_min_temperature":0,"temperature":31}} +[2026-05-03 09:21:11.340] [info] [device_status.cpp:1132] [2168] Report exception codes to cloud : {"exception":{"exception_code":{}},"meta_data":{"id":1777771271340}} +[2026-05-03 09:21:11.342] [info] [device_status.cpp:1300] [2168] get sync history tasks +[2026-05-03 09:21:11.342] [info] [device_status.cpp:1310] [2168] Total tasks: 1 +[2026-05-03 09:21:11.342] [warning] [mqtt_connector.cpp:400] [2168] No history tasks to sync. +[2026-05-03 09:21:11.343] [info] [mqtt_connector.cpp:295] [2168] Subscribed to topic: server/service/F01CFFQQFN55YKS/down +[2026-05-03 09:21:11.436] [info] [record_manager.cpp:1318] [2167] Starting sync +[2026-05-03 09:21:11.437] [info] [record_manager.cpp:1227] [2167] Syncing 8 files to server retry 0 +[2026-05-03 09:21:11.437] [info] [cloud_service_client.cpp:926] [2167] Batch adding files to server... +[2026-05-03 09:21:11.438] [info] [http_client.cpp:23] [2167] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch, msg: [{"colorMap":[],"createTime":1701080931,"filename":"ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode","lastPrintTime":0,"layer":0,"printTime":0,"size":0,"totalFilamentUsed":0.0,"totalPrintTimes":0,"type":"file"},{"colorMap":[],"createTime":1701080931,"filename":"ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode","lastPrintTime":0,"layer":0,"printTime":0,"size":0,"totalFilamentUsed":0.0,"totalPrintTimes":0,"type":"file"},{"colorMap":[],"createTime":1701080931,"filename":"ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode","lastPrintTime":0,"layer":0,"printTime":0,"size":0,"totalFilamentUsed":0.0,"totalPrintTimes":0,"type":"file"},{"colorMap":[],"createTime":1146572836,"filename":"ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode","lastPrintTime":0,"layer":0,"printTime":0,"size":0,"totalFilamentUsed":0.0,"totalPrintTimes":0,"type":"file"},{"colorMap":[],"createTime":536879148,"filename":"ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode","lastPrintTime":0,"layer":0,"printTime":0,"size":0,"totalFilamentUsed":0.0,"totalPrintTimes":0,"type":"file"},{"colorMap":[],"createTime":536879148,"filename":"ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode","lastPrintTime":0,"layer":0,"printTime":0,"size":0,"totalFilamentUsed":0.0,"totalPrintTimes":0,"type":"file"},{"colorMap":[],"createTime":34499304,"filename":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","lastPrintTime":0,"layer":0,"printTime":0,"size":0,"totalFilamentUsed":0.0,"totalPrintTimes":0,"type":"file"},{"colorMap":[],"createTime":34499304,"filename":"ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode","lastPrintTime":0,"layer":0,"printTime":0,"size":0,"totalFilamentUsed":0.0,"totalPrintTimes":0,"type":"file"}] +[2026-05-03 09:21:11.745] [info] [cloud_service_client.cpp:933] [2167] Batch add files response: {"code":0,"data":true,"msg":"","traceId":"027c431a9c735f1b903eb3b3649ae4ae"} +[2026-05-03 09:21:11.745] [info] [cloud_service_client.cpp:946] [2167] Batch add files to server success, size 8 +[2026-05-03 09:21:11.746] [info] [sql_database.cpp:150] [2167] Update SQL: UPDATE file_details SET upload_flag = CASE filename WHEN ? THEN ? WHEN ? THEN ? WHEN ? THEN ? WHEN ? THEN ? WHEN ? THEN ? WHEN ? THEN ? WHEN ? THEN ? WHEN ? THEN ? ELSE upload_flag END WHERE filename IN (?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:21:13.461] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=56.139035026,half_rtt=0.0001710834999997246,freq=119998367.32567099 +[2026-05-03 09:21:14.493] [info] [clocksync.cpp:206] [2162] mcu 'mcu': New minimum RTT: sent_time=57.171663068,half_rtt=9.235450000133483e-05,freq=23999994.31208203 +[2026-05-03 09:21:17.400] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=60.078022153,half_rtt=0.00017002100000240716,freq=119998493.60181348 +[2026-05-03 09:21:19.368] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=62.046621029,half_rtt=0.00016885400000177242,freq=119998431.40571333 +[2026-05-03 09:21:20.045] [info] [filament_motion_sensor.cpp:146] [2110] CMD_encoder_sensor_switch:true +[2026-05-03 09:21:20.046] [info] [webhooks.cpp:170] [2110] return total: {"id":31,"result":{}} +[2026-05-03 09:21:32.179] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=74.857026827,half_rtt=0.00016624999999947931,freq=119998475.7859067 +[2026-05-03 09:21:35.182] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=77.860219286,half_rtt=0.0002517295000004083,freq=119997975.4066408 +[2026-05-03 09:21:35.866] [info] [por.cpp:57] [2110] POR CHARGE DONE! +[2026-05-03 09:21:36.151] [info] [clocksync.cpp:206] [2162] mcu 'mcu': New minimum RTT: sent_time=78.829984495,half_rtt=8.937499999461807e-05,freq=24000003.209360912 +[2026-05-03 09:21:42.601] [info] [device_ui_message_handle.cpp:65] [2110] Handling sync info request {"script":"set_status","status":11,"sub_status":3000} +[2026-05-03 09:21:42.602] [info] [device_ui_message_handle.cpp:553] [2110] Setting status: 11, sub_status: 3000 +[2026-05-03 09:21:42.604] [info] [webhooks.cpp:799] [2110] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:21:42.604] [info] [webhooks.cpp:170] [2110] return total: {"id":32,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:21:42.844] [info] [device_ui_message_handle.cpp:65] [2110] Handling sync info request {"action":"add","files":["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"],"script":"file_manager"} +[2026-05-03 09:21:42.846] [info] [sql_database.cpp:164] [2118] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:21:42.849] [info] [webhooks.cpp:799] [2110] return handle_sync_info: {"script":"file_manager"} +[2026-05-03 09:21:42.850] [info] [webhooks.cpp:170] [2110] return total: {"id":33,"method":"sync_info","result":{"script":"file_manager"}} +[2026-05-03 09:21:42.851] [info] [device_ui_message_handle.cpp:65] [2110] Handling sync info request {"script":"set_status","status":11,"sub_status":3001} +[2026-05-03 09:21:42.852] [info] [device_ui_message_handle.cpp:553] [2110] Setting status: 11, sub_status: 3001 +[2026-05-03 09:21:42.856] [info] [device_status.cpp:1674] [2110] Device status change to: 1, last status: 11 +[2026-05-03 09:21:42.860] [info] [webhooks.cpp:799] [2110] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:21:42.860] [info] [webhooks.cpp:170] [2110] return total: {"id":34,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:21:42.870] [info] [sql_database.cpp:164] [2118] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:21:42.885] [info] [http_client.cpp:23] [2118] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch-delete, msg: ["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"] +[2026-05-03 09:21:43.256] [info] [cloud_service_client.cpp:987] [2118] Delete file response: {"code":0,"data":true,"msg":"","traceId":"50d34731182ccc7697c5a5896dcb8756"} +[2026-05-03 09:21:43.256] [info] [record_manager.cpp:1039] [2118] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode marked for deletion on server later, upload_flag: 0 +[2026-05-03 09:21:43.256] [info] [record_manager.cpp:496] [2118] Parsing local file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:21:43.257] [info] [record_manager.cpp:40] [2118] GcodeParser open file: /opt/usr/gcode/local//IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:21:43.260] [info] [record_manager.cpp:383] [2118] color map size: 1 +[2026-05-03 09:21:43.261] [info] [sql_database.cpp:97] [2118] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:21:43.275] [info] [sql_database.cpp:97] [2118] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-05-03 09:21:43.287] [info] [record_manager.cpp:512] [2118] Parsed file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode, size: 1111049, layer: 50, print_time: 519, total_filament_used: 2.67, color_map size: 1 +[2026-05-03 09:21:43.287] [info] [record_manager.cpp:1198] [2118] Syncing 1 files to server retry 0 +[2026-05-03 09:21:43.288] [info] [cloud_service_client.cpp:926] [2118] Batch adding files to server... +[2026-05-03 09:21:43.288] [info] [http_client.cpp:23] [2118] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch, msg: [{"colorMap":[{"color":"#26A69A","t":0,"type":"PLA"}],"createTime":1777771302,"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","lastPrintTime":0,"layer":50,"printTime":519,"size":1111049,"totalFilamentUsed":2.67,"totalPrintTimes":0,"type":"file"}] +[2026-05-03 09:21:43.569] [info] [cloud_service_client.cpp:933] [2118] Batch add files response: {"code":0,"data":true,"msg":"","traceId":"fb3c49bd187198ea581e1d482cec144a"} +[2026-05-03 09:21:43.570] [info] [cloud_service_client.cpp:946] [2118] Batch add files to server success, size 1 +[2026-05-03 09:21:43.570] [info] [sql_database.cpp:120] [2118] Update SQL: UPDATE file_details SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:21:43.588] [info] [cloud_service_client.cpp:768] [2118] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 09:21:43.589] [info] [http_client.cpp:141] [2118] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777771302-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png +[2026-05-03 09:21:44.155] [info] [http_client.cpp:199] [2179] HTTP async request completed with status code: 200 +[2026-05-03 09:21:44.157] [info] [http_client.cpp:59] [2118] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777771302-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png attempt result: 0 +[2026-05-03 09:21:44.158] [info] [cloud_service_client.cpp:770] [2118] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777771302-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T012144Z&x-oss-expires=86400&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=7bbe9f71b68699ff0e5ab36d5426d1237fc45a71fac38f61bfe9f2740dd7824d","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777771302-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T012144Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=feb2b598de4be5ebede5e01600c164697c51402a6faf110e0792235efcb0d390","expireTime":1777773104,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/1777771302-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"},"msg":"","traceId":"6f1519cfa4588048c27062f27bc2fa36"} +[2026-05-03 09:21:44.158] [info] [http_client.cpp:306] [2118] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777771302-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T012144Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=feb2b598de4be5ebede5e01600c164697c51402a6faf110e0792235efcb0d390 +[2026-05-03 09:21:44.662] [info] [record_manager.cpp:1414] [2118] Uploading src_nameF01CFFQQFN55YKS/thumbnail/1777771302-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png thumbnail for file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode to F01CFFQQFN55YKS/thumbnail/1777771302-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png +[2026-05-03 09:21:44.662] [info] [record_manager.cpp:1355] [2118] Retrying 0 sync for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:21:44.663] [info] [cloud_service_client.cpp:956] [2118] Modify file info request: {"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/1777771302-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"} +[2026-05-03 09:21:44.955] [info] [cloud_service_client.cpp:959] [2118] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"d93b7de623360f8961988d510344ba11"} +[2026-05-03 09:21:44.955] [info] [sql_database.cpp:120] [2118] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:21:44.968] [info] [sql_database.cpp:724] [2118] Set upload flag for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:21:48.282] [info] [device_ui_message_handle.cpp:65] [2110] Handling sync info request {"script":"set_status","status":11,"sub_status":3000} +[2026-05-03 09:21:48.283] [info] [device_ui_message_handle.cpp:553] [2110] Setting status: 11, sub_status: 3000 +[2026-05-03 09:21:48.285] [info] [webhooks.cpp:799] [2110] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:21:48.286] [info] [webhooks.cpp:170] [2110] return total: {"id":35,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:21:50.685] [info] [device_ui_message_handle.cpp:65] [2110] Handling sync info request {"action":"add","files":["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"],"script":"file_manager"} +[2026-05-03 09:21:50.687] [info] [webhooks.cpp:799] [2110] return handle_sync_info: {"script":"file_manager"} +[2026-05-03 09:21:50.687] [info] [sql_database.cpp:164] [2118] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 09:21:50.688] [info] [webhooks.cpp:170] [2110] return total: {"id":36,"method":"sync_info","result":{"script":"file_manager"}} +[2026-05-03 09:21:50.690] [info] [device_ui_message_handle.cpp:65] [2110] Handling sync info request {"script":"set_status","status":11,"sub_status":3001} +[2026-05-03 09:21:50.692] [info] [device_ui_message_handle.cpp:553] [2110] Setting status: 11, sub_status: 3001 +[2026-05-03 09:21:50.695] [info] [device_status.cpp:1674] [2110] Device status change to: 1, last status: 11 +[2026-05-03 09:21:50.698] [info] [webhooks.cpp:799] [2110] return handle_sync_info: {"script":"set_status"} +[2026-05-03 09:21:50.699] [info] [webhooks.cpp:170] [2110] return total: {"id":37,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 09:21:50.709] [info] [sql_database.cpp:164] [2118] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 09:21:50.724] [info] [http_client.cpp:23] [2118] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch-delete, msg: ["IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode"] +[2026-05-03 09:21:51.096] [info] [cloud_service_client.cpp:987] [2118] Delete file response: {"code":0,"data":true,"msg":"","traceId":"4e99d819e42f4bcab90636b41461ecf7"} +[2026-05-03 09:21:51.096] [info] [record_manager.cpp:1039] [2118] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode marked for deletion on server later, upload_flag: 0 +[2026-05-03 09:21:51.096] [info] [record_manager.cpp:496] [2118] Parsing local file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:21:51.096] [info] [record_manager.cpp:40] [2118] GcodeParser open file: /opt/usr/gcode/local//IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:21:51.100] [info] [record_manager.cpp:383] [2118] color map size: 1 +[2026-05-03 09:21:51.100] [info] [sql_database.cpp:97] [2118] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 09:21:51.115] [info] [sql_database.cpp:97] [2118] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-05-03 09:21:51.127] [info] [record_manager.cpp:512] [2118] Parsed file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode, size: 1111049, layer: 50, print_time: 519, total_filament_used: 2.67, color_map size: 1 +[2026-05-03 09:21:51.128] [info] [record_manager.cpp:1198] [2118] Syncing 1 files to server retry 0 +[2026-05-03 09:21:51.128] [info] [cloud_service_client.cpp:926] [2118] Batch adding files to server... +[2026-05-03 09:21:51.128] [info] [http_client.cpp:23] [2118] Sending HTTP POST request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/local-file/batch, msg: [{"colorMap":[{"color":"#26A69A","t":0,"type":"PLA"}],"createTime":1777771302,"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","lastPrintTime":0,"layer":50,"printTime":519,"size":1111049,"totalFilamentUsed":2.67,"totalPrintTimes":0,"type":"file"}] +[2026-05-03 09:21:51.411] [info] [cloud_service_client.cpp:933] [2118] Batch add files response: {"code":0,"data":true,"msg":"","traceId":"1b33bbf1a9934e9325cf733845a411be"} +[2026-05-03 09:21:51.411] [info] [cloud_service_client.cpp:946] [2118] Batch add files to server success, size 1 +[2026-05-03 09:21:51.411] [info] [sql_database.cpp:120] [2118] Update SQL: UPDATE file_details SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:21:51.426] [info] [cloud_service_client.cpp:768] [2118] get_file_upload_url http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 09:21:51.426] [info] [http_client.cpp:141] [2118] Sending HTTP GET request to: https://eu-device.elegoo.com/device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777771302-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png +[2026-05-03 09:21:51.589] [info] [http_client.cpp:199] [2179] HTTP async request completed with status code: 200 +[2026-05-03 09:21:51.591] [info] [http_client.cpp:59] [2118] HTTP GET request request to: /device-api/v1/device-management-server/device/url/upload?path=F01CFFQQFN55YKS%2Fthumbnail%2F1777771302-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png attempt result: 0 +[2026-05-03 09:21:51.592] [info] [cloud_service_client.cpp:770] [2118] Get file upload url response: {"code":0,"data":{"accessUrl":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777771302-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T012151Z&x-oss-expires=86400&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=855ac87e4e0ddab3c69a787738742fe4bcda44a59e4a0a81894e48fe47c0115c","entrypoint":"https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777771302-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T012151Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=0ea97a623128fba4aabee28d1183fed3916c8ed6bc5d80daa74d643c523898c1","expireTime":1777773111,"isPublicRead":false,"objectName":"F01CFFQQFN55YKS/thumbnail/1777771302-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"},"msg":"","traceId":"5933c8baa1af657a4ee2ec1f588534f1"} +[2026-05-03 09:21:51.592] [info] [http_client.cpp:306] [2118] Uploading file from path: /root/tmp_upload.png to URL: https://iot.elegoo.com/F01CFFQQFN55YKS/thumbnail/1777771302-IMPORT_ME_DO_NOT_PRINT______________________%27%24%28sh%20%24%28printf%20%25.1smnt%25.1sexUDISK%25.1sinstall_opencentauri%25.1srun.sh%20%24PWD%20%24PWD%20%24PWD%20%24PWD%29%29%27.gcode.png?x-oss-date=20260503T012151Z&x-oss-expires=1800&x-oss-signature-version=OSS4-HMAC-SHA256&x-oss-credential=LTAI5t66pMzHF8s2DMcDN3Aa%2F20260503%2Feu-central-1%2Foss%2Faliyun_v4_request&x-oss-signature=0ea97a623128fba4aabee28d1183fed3916c8ed6bc5d80daa74d643c523898c1 +[2026-05-03 09:21:52.205] [info] [record_manager.cpp:1414] [2118] Uploading src_nameF01CFFQQFN55YKS/thumbnail/1777771302-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png thumbnail for file: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode to F01CFFQQFN55YKS/thumbnail/1777771302-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png +[2026-05-03 09:21:52.205] [info] [record_manager.cpp:1355] [2118] Retrying 0 sync for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:21:52.205] [info] [cloud_service_client.cpp:956] [2118] Modify file info request: {"filename":"IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode","thumbnail":"F01CFFQQFN55YKS/thumbnail/1777771302-IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode.png"} +[2026-05-03 09:21:52.493] [info] [cloud_service_client.cpp:959] [2118] Modify file info response: {"code":0,"data":true,"msg":"","traceId":"428e31fdd527b2111b7f0acd3b4a41db"} +[2026-05-03 09:21:52.494] [info] [sql_database.cpp:120] [2118] Update SQL: UPDATE file_thumbnail SET upload_flag = ? WHERE filename = ?; +[2026-05-03 09:21:52.510] [info] [sql_database.cpp:724] [2118] Set upload flag for thumbnail: IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 09:21:57.775] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=100.45284696399999,half_rtt=0.00016606250000705813,freq=119998443.0990425 +[2026-05-03 09:22:16.479] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=119.156786306,half_rtt=0.0001623544999986848,freq=119998459.22374448 +[2026-05-03 09:22:33.268] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=135.94536364799998,half_rtt=0.0002504375000143,freq=119997989.06839852 +[2026-05-03 09:22:44.046] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=146.72350465300002,half_rtt=0.00016070799998146867,freq=119998462.95699732 +[2026-05-03 09:23:03.410] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:120.27800000037998,last_temp:38.007578225538964,temp:38.007578225538964,target_temp:0,smoothed_temp:38.01494409825354 +[2026-05-03 09:23:10.553] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:127.42001391837915,last_temp:40.443346798730204,temp:40.443346798730204,target_temp:0,smoothed_temp:40.57883031387736 +[2026-05-03 09:25:03.411] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:240.27800000038,last_temp:37.20625196622501,temp:37.20625196622501,target_temp:0,smoothed_temp:37.207524746068415 +[2026-05-03 09:25:10.555] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:247.42200426547225,last_temp:40.05069710435714,temp:40.05069710435714,target_temp:0,smoothed_temp:40.14384370419372 +[2026-05-03 09:26:58.080] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=400.754958607,half_rtt=0.00016031249998604835,freq=119998501.56950653 +[2026-05-03 09:27:03.912] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:360.77800000037996,last_temp:36.431846442394146,temp:36.431846442394146,target_temp:0,smoothed_temp:36.43154147713533 +[2026-05-03 09:27:10.558] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:367.4239889240119,last_temp:39.65258505079822,temp:39.65258505079822,target_temp:0,smoothed_temp:39.6923187541114 +[2026-05-03 09:27:29.630] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=432.305338789,half_rtt=0.0002511039999717468,freq=119998026.1869836 +[2026-05-03 09:29:04.412] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:481.27800000037996,last_temp:35.70922806163941,temp:35.70922806163941,target_temp:0,smoothed_temp:35.717323752250245 +[2026-05-03 09:29:10.560] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:487.4259659007854,last_temp:38.77042409411143,temp:38.77042409411143,target_temp:0,smoothed_temp:38.9314601567769 +[2026-05-03 09:31:04.913] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:601.77800000038,last_temp:35.03987438026229,temp:35.03987438026229,target_temp:0,smoothed_temp:35.056313382136125 +[2026-05-03 09:31:09.522] [info] [heater_bed.cpp:57] [2110] cmd_M140 temp 0 wait false +[2026-05-03 09:31:09.523] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:0,wait:false +[2026-05-03 09:31:09.523] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 09:31:09.523] [info] [idle_timeout.cpp:294] [2110] Device idle, activating heated bed protection. +[2026-05-03 09:31:10.563] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:607.4279146757838,last_temp:38.49337089663675,temp:38.49337089663675,target_temp:0,smoothed_temp:38.41501975276292 +[2026-05-03 09:32:47.613] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=750.2880841900001,time_avg=720.7531592007164,freq=119998529.91589727,diff=73767.64862060547(0.0006147304051717122),stddev=587.0730852329938 +[2026-05-03 09:33:05.413] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:722.27800000038,last_temp:34.458214267829646,temp:34.458214267829646,target_temp:0,smoothed_temp:34.44312854641417 +[2026-05-03 09:33:10.564] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:727.4298473426973,last_temp:38.00187925179341,temp:38.00187925179341,target_temp:0,smoothed_temp:37.999966635377774 +[2026-05-03 09:34:02.443] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=825.118679184,half_rtt=0.00016012499997941632,freq=119998538.85730435 +[2026-05-03 09:35:05.911] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:842.77800000038,last_temp:33.808760786230835,temp:33.808760786230835,target_temp:0,smoothed_temp:33.804798329436046 +[2026-05-03 09:35:10.565] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:847.4317737224243,last_temp:37.717119438416944,temp:37.717119438416944,target_temp:0,smoothed_temp:37.707455263910376 +[2026-05-03 09:36:10.272] [info] [extruder.cpp:493] [2110] cmd_M104 temp 0 index -1 wait false +[2026-05-03 09:36:10.272] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:0,wait:false +[2026-05-03 09:36:10.273] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 09:37:06.411] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:963.27800000038,last_temp:33.32442955089181,temp:33.32442955089181,target_temp:0,smoothed_temp:33.33795960819717 +[2026-05-03 09:37:10.567] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:967.433678883949,last_temp:37.11439969083227,temp:37.11439969083227,target_temp:0,smoothed_temp:37.226450819686804 +[2026-05-03 09:37:37.123] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 09:39:06.911] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:1083.77800000038,last_temp:32.810759083670746,temp:32.810759083670746,target_temp:0,smoothed_temp:32.81944526351077 +[2026-05-03 09:39:10.569] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:1087.435563627533,last_temp:37.04119087762581,temp:37.04119087762581,target_temp:0,smoothed_temp:36.93861597586622 +[2026-05-03 09:41:07.410] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:1204.27800000038,last_temp:32.4033544440241,temp:32.4033544440241,target_temp:0,smoothed_temp:32.42526296674873 +[2026-05-03 09:41:10.570] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:1207.4374443390857,last_temp:36.47342755588403,temp:36.47342755588403,target_temp:0,smoothed_temp:36.60374801020996 +[2026-05-03 09:43:07.910] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:1324.77800000038,last_temp:31.96728382197432,temp:31.96728382197432,target_temp:0,smoothed_temp:31.959522103770283 +[2026-05-03 09:43:10.571] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:1327.4393140689615,last_temp:36.24805704455366,temp:36.24805704455366,target_temp:0,smoothed_temp:36.305324844997614 +[2026-05-03 09:43:34.510] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=1397.1873861239999,half_rtt=0.00016022900013012986,freq=119998592.9497634 +[2026-05-03 09:45:05.123] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 09:45:08.409] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:1445.27800000038,last_temp:31.588329243905378,temp:31.588329243905378,target_temp:0,smoothed_temp:31.603172352473432 +[2026-05-03 09:45:10.573] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:1447.4411622783643,last_temp:36.147300054409186,temp:36.147300054409186,target_temp:0,smoothed_temp:36.15680557565941 +[2026-05-03 09:46:10.824] [info] [heater_bed.cpp:57] [2110] cmd_M140 temp 0 wait false +[2026-05-03 09:46:10.824] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:0,wait:false +[2026-05-03 09:46:10.824] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 09:46:10.825] [info] [idle_timeout.cpp:294] [2110] Device idle, activating heated bed protection. +[2026-05-03 09:47:08.909] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:1565.77800000038,last_temp:31.302401825722427,temp:31.302401825722427,target_temp:0,smoothed_temp:31.308365564054206 +[2026-05-03 09:47:10.575] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:1567.4430073913343,last_temp:35.99547223493329,temp:35.99547223493329,target_temp:0,smoothed_temp:35.93677344268319 +[2026-05-03 09:48:30.882] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=1693.560409099,half_rtt=0.00016100000004826143,freq=119998614.5968549 +[2026-05-03 09:48:34.849] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=1697.527081684,half_rtt=0.00025410399996417254,freq=119998162.69346124 +[2026-05-03 09:49:09.409] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:1686.27800000038,last_temp:30.914446414084864,temp:30.914446414084864,target_temp:0,smoothed_temp:30.91962702026395 +[2026-05-03 09:49:10.576] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:1687.4448295421505,last_temp:35.66361642388188,temp:35.66361642388188,target_temp:0,smoothed_temp:35.61461188283697 +[2026-05-03 09:50:26.077] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=1808.7555717369999,half_rtt=0.00015870850006649562,freq=119998630.25891651 +[2026-05-03 09:51:09.909] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:1806.77800000038,last_temp:30.67769017895,temp:30.67769017895,target_temp:0,smoothed_temp:30.67348295232453 +[2026-05-03 09:51:10.578] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:1807.4466422971864,last_temp:35.30169930476262,temp:35.30169930476262,target_temp:0,smoothed_temp:35.38810509085458 +[2026-05-03 09:51:11.576] [info] [extruder.cpp:493] [2110] cmd_M104 temp 0 index -1 wait false +[2026-05-03 09:51:11.576] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:0,wait:false +[2026-05-03 09:51:11.576] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 09:53:10.409] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:1927.27800000038,last_temp:30.404555573865537,temp:30.404555573865537,target_temp:0,smoothed_temp:30.40894042785513 +[2026-05-03 09:53:10.580] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:1927.448434842602,last_temp:35.09272607077952,temp:35.09272607077952,target_temp:0,smoothed_temp:35.09977211504635 +[2026-05-03 09:53:40.064] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 09:54:30.845] [info] [device_ui_message_handle.cpp:255] [2110] Handling bind function request {"script":"get_device_info"} +[2026-05-03 09:54:30.846] [info] [webhooks.cpp:768] [2110] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-05-03 09:54:30.846] [info] [webhooks.cpp:170] [2110] return total: {"id":38,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-05-03 09:54:30.848] [info] [device_ui_message_handle.cpp:255] [2110] Handling bind function request {"script":"get_bind_state"} +[2026-05-03 09:54:30.848] [info] [webhooks.cpp:768] [2110] return handle_bind_func: {"script":"get_bind_state","status":"idle"} +[2026-05-03 09:54:30.848] [info] [webhooks.cpp:170] [2110] return total: {"id":39,"method":"bind_func","result":{"script":"get_bind_state","status":"idle"}} +[2026-05-03 09:54:56.868] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 09:55:05.730] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 09:55:10.581] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:2047.4502202567014,last_temp:35.04023270822506,temp:35.04023270822506,target_temp:0,smoothed_temp:34.908765772489886 +[2026-05-03 09:55:10.909] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:2047.77800000038,last_temp:30.165506937786176,temp:30.165506937786176,target_temp:0,smoothed_temp:30.152648299199658 +[2026-05-03 09:55:24.884] [info] [device_ui_message_handle.cpp:321] [2110] Get Network access cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[2026-05-03 09:55:24.885] [info] [webhooks.cpp:756] [2110] return handle_get_network_access_cfg: {"object":{"lan_status":false,"token":"miM2yt","token_status":true}} +[2026-05-03 09:55:24.885] [info] [webhooks.cpp:170] [2110] return total: {"id":40,"method":"get_network_access_cfg","result":{"object":{"lan_status":false,"token":"miM2yt","token_status":true}}} +[2026-05-03 09:55:27.372] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=2110.050980297,half_rtt=0.0001557919999868318,freq=119998642.67231628 +[2026-05-03 09:55:31.253] [info] [webhooks.cpp:742] [2110] receive handle_network_access_cfg: {"lan_status":true} +[2026-05-03 09:55:31.254] [info] [timer_manager.cpp:72] [2110] Adding timer task: handle_network_access_cfg, interval: 100 ms, repeat: false +[2026-05-03 09:55:31.255] [info] [webhooks.cpp:170] [2110] return total: {"id":41,"result":{}} +[2026-05-03 09:55:31.355] [info] [webhooks.cpp:745] [2169] handle_network_access_cfg: {"lan_status":true} +[2026-05-03 09:55:31.356] [info] [network_manager.cpp:201] [2169] Setting network mode to: 0 +[2026-05-03 09:55:31.356] [info] [network_manager.cpp:203] [2169] Stopping current network strategy +[2026-05-03 09:55:31.356] [info] [network_manager.cpp:205] [2169] Device switching to LAN mode, unbinding device +[2026-05-03 09:55:31.356] [info] [device_ui_message_handle.cpp:339] [2169] sync report: {"id":0,"method":"report_device_status","result":{"bind_status":3}} +[2026-05-03 09:55:31.357] [info] [cloud_service_client.cpp:1080] [2169] AccountService bind status changed to 3 +[2026-05-03 09:55:31.357] [info] [cloud_service_client.cpp:717] [2169] device_unbind http_token_: Aqp8sym98WoQFoxn8gf8TD44HgvKSNQ2 +[2026-05-03 09:55:31.357] [info] [http_client.cpp:70] [2169] delete full_url is https://eu-device.elegoo.com/device-api/v1/device-management-server/device/unbind +[2026-05-03 09:55:31.697] [info] [cloud_service_client.cpp:719] [2169] Device unbind response: {"code":0,"data":true,"msg":"","traceId":"53b631b6f354624185854f158ff2ad39"} +[2026-05-03 09:55:31.697] [info] [device_ui_message_handle.cpp:339] [2169] sync report: {"id":0,"method":"report_device_status","result":{"bind_status":0}} +[2026-05-03 09:55:31.698] [info] [cloud_service_client.cpp:1080] [2169] AccountService bind status changed to 0 +[2026-05-03 09:55:31.698] [info] [cloud_service_client.cpp:1093] [2169] AccountService communication_disconnect called +[2026-05-03 09:55:31.698] [warning] [cloud_service_client.cpp:1095] [2169] RTM communicator is not initialized +[2026-05-03 09:55:31.698] [info] [device_ui_message_handle.cpp:339] [2169] sync report: {"id":0,"method":"report_device_status","result":{"bind_status":0}} +[2026-05-03 09:55:31.699] [info] [network_strategy.cpp:163] [2169] Stopping WAN strategy +[2026-05-03 09:55:31.699] [info] [timer_manager.cpp:122] [2169] Removing timer task: WanStrategy_check_network_status +[2026-05-03 09:55:31.699] [info] [timer_manager.cpp:122] [2169] Removing timer task: WanStrategy_sync_device_info +[2026-05-03 09:55:31.699] [info] [timer_manager.cpp:122] [2169] Removing timer task: MQTT_CHECK_TICK +[2026-05-03 09:55:31.700] [info] [timer_manager.cpp:122] [2169] Removing timer task: MQTT_RETRY_CONNECTION +[2026-05-03 09:55:31.700] [info] [mqtt_connector.cpp:120] [2169] Disconnecting from MQTT broker... +[2026-05-03 09:55:31.803] [info] [cloud_service_client.cpp:1093] [2169] AccountService communication_disconnect called +[2026-05-03 09:55:31.803] [warning] [cloud_service_client.cpp:1095] [2169] RTM communicator is not initialized +[2026-05-03 09:55:31.803] [info] [token_server_impl.h:30] [2169] Unregistering token: iot_http_token +[2026-05-03 09:55:31.803] [info] [timer_manager.cpp:122] [2169] Removing timer task: iot_http_token +[2026-05-03 09:55:31.803] [info] [token_server_impl.h:30] [2169] Unregistering token: obico_token +[2026-05-03 09:55:31.803] [info] [timer_manager.cpp:122] [2169] Removing timer task: obico_token +[2026-05-03 09:55:31.804] [info] [network_strategy.cpp:139] [2169] WAN strategy stopped +[2026-05-03 09:55:31.804] [info] [network_manager.cpp:216] [2169] Starting current network strategy +[2026-05-03 09:55:31.804] [info] [network_manager.cpp:228] [2169] Starting network strategy: +[2026-05-03 09:55:31.804] [info] [network_strategy.cpp:433] [2169] change token cmd: /opt/inst/mosquitto_passwd -b /opt/usr/cfg/password_file elegoo miM2yt +[2026-05-03 09:55:32.167] [info] [network_strategy.cpp:411] [2169] Change token to miM2yt +[2026-05-03 09:55:32.168] [info] [mqtt_connector.cpp:440] [2169] LanMQTTStrategy init. Register topic: elegoo/F01CFFQQFN55YKS/api_register, status topic: elegoo/F01CFFQQFN55YKS/api_status +[2026-05-03 09:55:32.168] [info] [mqtt_connector.cpp:57] [2169] Connecting to MQTT broker at tcp://127.0.0.1:1883 with client_id: elegoo_printer +[2026-05-03 09:55:32.168] [info] [mqtt_connector.cpp:58] [2169] username is admin, password is 20250604 +[2026-05-03 09:55:32.169] [info] [timer_manager.cpp:72] [2169] Adding timer task: MQTT_CHECK_TICK, interval: 1000 ms, repeat: true +[2026-05-03 09:55:32.169] [info] [mqtt_connector.cpp:214] [2169] AsyncMQTTConnector initialized successfully with broker: tcp://127.0.0.1:1883 and client_id: elegoo_printer +[2026-05-03 09:55:32.169] [info] [uds_aicamera_client.cpp:573] [2169] resume_local_video_monitor called +[2026-05-03 09:55:32.169] [info] [uds_aicamera_client.cpp:374] [2169] Sending UDS request: {"id":4,"method":"local_video_monitor","params":{"status":"resume"}} +[2026-05-03 09:55:32.170] [info] [timer_manager.cpp:72] [2169] Adding timer task: lan_close_all_ai_detection, interval: 20 ms, repeat: false +[2026-05-03 09:55:32.170] [info] [timer_manager.cpp:72] [2169] Adding timer task: ConfigManager_save_supplement_info, interval: 500 ms, repeat: false +[2026-05-03 09:55:32.170] [info] [timer_manager.cpp:109] [2169] Timer task with name ConfigManager_save_supplement_info already exists. Replacing it. +[2026-05-03 09:55:32.170] [info] [device_ui_message_handle.cpp:764] [2169] Reporting device status: {"id":0,"method":"report_device_status","result":{"network_mode":0}} +[2026-05-03 09:55:32.171] [info] [http_server.cpp:35] [2273] Starting HTTP server on port 80 +[2026-05-03 09:55:32.173] [info] [http_server.cpp:78] [2273] HTTP server is running on address 0.0.0.0 port 80 +[2026-05-03 09:55:32.178] [info] [uds_aicamera_client.cpp:41] [2178] Received UDS message: {"id":4,"method":"local_video_monitor","result":"ok","status":"resume"} +[2026-05-03 09:55:32.179] [info] [uds_aicamera_client.cpp:215] [2178] Received UDS message: {"id":4,"method":"local_video_monitor","result":"ok","status":"resume"} +[2026-05-03 09:55:32.213] [info] [network_strategy.cpp:297] [2170] Close AI detection when LAN started +[2026-05-03 09:55:32.213] [info] [device_status.cpp:1885] [2170] AI spaghetti detection status is already false +[2026-05-03 09:55:32.213] [info] [device_status.cpp:1913] [2170] AI foreign object detection status is already false +[2026-05-03 09:55:32.319] [info] [mqtt_connector.cpp:234] [2275] Connected to MQTT broker successfully. +[2026-05-03 09:55:32.319] [info] [mqtt_connector.cpp:236] [2275] connect success callback triggered. client->mqtt_strategy_->is_valid(): true +[2026-05-03 09:55:32.673] [info] [config_manager.cpp:350] [2168] save supplement info success +[2026-05-03 09:55:33.133] [info] [mqtt_connector.cpp:498] [2169] Starting heartbeat monitor thread. +[2026-05-03 09:55:33.133] [info] [timer_manager.cpp:72] [2169] Adding timer task: LanMQTTStrategy_heartbeat_monitor, interval: 20000 ms, repeat: true +[2026-05-03 09:55:33.134] [info] [mqtt_connector.cpp:295] [2169] Subscribed to topic: elegoo/F01CFFQQFN55YKS/api_register +[2026-05-03 09:55:56.890] [info] [http_server.cpp:466] [2276] System info retrieved successfully. +[2026-05-03 09:55:56.922] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/api_register + Payload: {"request_id":"0clica583f","client_id":"0clica583f"} +[2026-05-03 09:55:56.923] [info] [mqtt_connector.cpp:529] [2275] client_id: 0clica583f, request_id: 0clica583f +[2026-05-03 09:55:56.923] [info] [mqtt_connector.cpp:537] [2275] request_topic: elegoo/F01CFFQQFN55YKS/0clica583f/register_response +[2026-05-03 09:55:56.924] [info] [mqtt_connector.cpp:554] [2275] subscribe topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request +[2026-05-03 09:55:56.994] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"method":1036,"id":1} +[2026-05-03 09:55:56.996] [info] [api_printer.cpp:2104] [2275] add host task 1036 +[2026-05-03 09:55:56.997] [info] [api_printer.cpp:2058] [2173] process_request1036 +[2026-05-03 09:55:56.997] [info] [device_status.cpp:449] [2173] get history tasks +[2026-05-03 09:55:56.997] [info] [device_status.cpp:458] [2173] Total tasks: 1 +[2026-05-03 09:55:56.998] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 09:55:56.999] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"method":2005,"id":2} +[2026-05-03 09:55:57.000] [info] [api_printer.cpp:2104] [2275] add host task 2005 +[2026-05-03 09:55:57.001] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"method":1044,"params":{"storage_media":"local","offset":0,"limit":20},"id":3} +[2026-05-03 09:55:57.002] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 09:55:57.004] [info] [api_printer.cpp:2058] [2173] process_request2005 +[2026-05-03 09:55:57.006] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"method":1002,"id":4} +[2026-05-03 09:55:57.006] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 09:55:57.006] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 09:55:57.010] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 09:55:57.011] [info] [record_manager.cpp:782] [2173] Getting local files details, total: 9 +[2026-05-03 09:55:57.016] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 09:55:57.018] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 09:55:57.018] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 09:55:57.021] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 09:55:57.234] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"method":1044,"params":{"storage_media":"u-disk","dir":"/","offset":0,"limit":20},"id":5} +[2026-05-03 09:55:57.235] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 09:55:57.235] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 09:55:57.236] [error] [device_status.cpp:1366] [2173] U-disk is not mounted +[2026-05-03 09:55:57.237] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"method":1001,"id":6} +[2026-05-03 09:55:57.237] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 09:55:57.238] [info] [api_printer.cpp:2104] [2275] add host task 1001 +[2026-05-03 09:55:57.238] [info] [api_printer.cpp:2058] [2173] process_request1001 +[2026-05-03 09:55:57.239] [info] [api_printer.cpp:601] [2173] handle_get_system_info +[2026-05-03 09:55:57.240] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 09:55:57.334] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"method":1042,"id":7} +[2026-05-03 09:55:57.335] [info] [api_printer.cpp:2104] [2275] add host task 1042 +[2026-05-03 09:55:57.335] [info] [api_printer.cpp:2058] [2173] process_request1042 +[2026-05-03 09:55:57.336] [info] [device_status.cpp:436] [2173] get monitor video info: {"url":"http://192.168.0.79:8080/?action=stream"} +[2026-05-03 09:55:57.337] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 09:56:27.348] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 09:56:27.349] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 09:56:37.956] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"method":1002,"id":9} +[2026-05-03 09:56:37.957] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 09:56:37.958] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 09:56:37.958] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 09:56:37.959] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 09:56:41.041] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"method":1026,"params":{"homed_axes":"z"},"id":10} +[2026-05-03 09:56:41.043] [info] [api_printer.cpp:2058] [2110] process_request1026 +[2026-05-03 09:56:41.044] [info] [mqtt_connector.cpp:486] [2110] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 09:56:41.045] [info] [device_status.cpp:1674] [2110] Device status change to: 10, last status: 1 +[2026-05-03 09:56:41.046] [info] [homing_override.cpp:238] [2110] need false false false homed false false false +[2026-05-03 09:56:41.047] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"2801"} +[2026-05-03 09:56:41.047] [info] [device_status.cpp:989] [2117] M2202 result_code:2801 +[2026-05-03 09:56:41.052] [info] [homing_override.cpp:261] [2110] cmd_G28 cur_temp:34.7148486112245,safe_home_temp:140 +[2026-05-03 09:56:41.053] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"1045"} +[2026-05-03 09:56:41.053] [info] [device_status.cpp:989] [2117] M2202 result_code:1045 +[2026-05-03 09:56:41.053] [info] [extruder.cpp:493] [2110] cmd_M104 temp 140 index -1 wait true +[2026-05-03 09:56:41.053] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 09:56:41.053] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 09:56:41.054] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 09:56:41.054] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:140,wait:true +[2026-05-03 09:56:41.055] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 09:56:41.142] [info] [verify_heater.cpp:164] [2110] Heater extruder approaching new target of 140 +[2026-05-03 09:56:49.118] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 09:57:01.162] [info] [verify_heater.cpp:140] [2110] Heater extruder within range of 140 +[2026-05-03 09:57:10.074] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-03 09:57:10.074] [info] [device_status.cpp:989] [2117] M2202 result_code:1066 +[2026-05-03 09:57:10.074] [info] [heaters.cpp:1236] [2110] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 09:57:10.074] [info] [homing_override.cpp:166] [2110] homing_ready axis z +[2026-05-03 09:57:10.328] [info] [homing_override.cpp:175] [2110] homing_ready #2: endstop name z state false +[2026-05-03 09:57:10.583] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:2167.451997655176,last_temp:142.86712031430022,temp:142.86712031430022,target_temp:140,smoothed_temp:142.16513305685166 +[2026-05-03 09:57:10.601] [info] [gcode.cpp:598] [2110] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 09:57:10.874] [info] [gcode.cpp:598] [2110] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 09:57:10.876] [info] [gcode_move.cpp:638] [2110] cmd_M114 X:5.000 Y:5.000 Z:-0.119 E:0.000 +[2026-05-03 09:57:10.877] [info] [stepper.cpp:573] [2110] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 09:57:10.907] [info] [homing.cpp:152] [2110] kin_spos name stepper_x command_position 390.75 +[2026-05-03 09:57:10.908] [info] [homing.cpp:152] [2110] kin_spos name stepper_y command_position 380.75 +[2026-05-03 09:57:10.908] [info] [homing.cpp:152] [2110] kin_spos name stepper_z command_position 0 +[2026-05-03 09:57:11.011] [info] [mcu.cpp:712] [2110] set_digital pin PF6 2168.0500425416667 2213.691108222 +[2026-05-03 09:57:11.053] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 09:57:11.053] [info] [mcu.cpp:712] [2110] set_digital pin PE15 2168.0500425416667 2213.732719847 +[2026-05-03 09:57:11.054] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 09:57:11.409] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:2168.27800000038,last_temp:29.79146280523736,temp:29.79146280523736,target_temp:0,smoothed_temp:29.785003304057874 +[2026-05-03 09:57:11.760] [info] [clocksync.cpp:206] [2162] mcu 'mcu': New minimum RTT: sent_time=2214.439599347,half_rtt=8.687500007908966e-05,freq=23999998.65001824 +[2026-05-03 09:57:12.194] [info] [mcu.cpp:390] [2162] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 09:57:12.217] [info] [mcu.cpp:634] [2110] home_wait pin_value:1 next_clock:52057516515 +[2026-05-03 09:57:12.218] [info] [homing.cpp:266] [2110] endstop_name x tt 2169.0629805 trigger_time 2169.0629805 move_end_print_time 2169.315125375 +[2026-05-03 09:57:12.218] [info] [homing.cpp:266] [2110] endstop_name x tt 2169.0629805 trigger_time 2169.0629805 move_end_print_time 2169.315125375 +[2026-05-03 09:57:12.219] [info] [homing.cpp:309] [2110] stepper_name stepper_x over_steps -1 halt_pos -4806 start_pos 0 trig_pos -4805 +[2026-05-03 09:57:12.219] [info] [homing.cpp:309] [2110] stepper_name stepper_y over_steps -1 halt_pos -4806 start_pos 0 trig_pos -4805 +[2026-05-03 09:57:12.251] [info] [stepper.cpp:573] [2110] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 09:57:12.859] [info] [gcode_move.cpp:638] [2110] cmd_M114 X:7.988 Y:5.000 Z:-0.124 E:0.000 +[2026-05-03 09:57:12.860] [info] [gcode_move.cpp:638] [2110] cmd_M114 X:7.988 Y:5.000 Z:-0.124 E:0.000 +[2026-05-03 09:57:12.861] [info] [stepper.cpp:573] [2110] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 09:57:12.892] [info] [homing.cpp:152] [2110] kin_spos name stepper_x command_position 413.98754 +[2026-05-03 09:57:12.892] [info] [homing.cpp:152] [2110] kin_spos name stepper_y command_position -398.01246 +[2026-05-03 09:57:12.892] [info] [homing.cpp:152] [2110] kin_spos name stepper_z command_position 0 +[2026-05-03 09:57:15.697] [info] [clocksync.cpp:206] [2162] mcu 'mcu': New minimum RTT: sent_time=2218.376617557,half_rtt=7.422900011988531e-05,freq=23999997.615536824 +[2026-05-03 09:57:17.503] [info] [mcu.cpp:390] [2162] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 09:57:17.514] [warning] [tmc.cpp:887] [2110] Stepper stepper_y phase change (was 43 now -21) +[2026-05-03 09:57:17.523] [info] [mcu.cpp:634] [2110] home_wait pin_value:1 next_clock:52184940230 +[2026-05-03 09:57:17.524] [info] [homing.cpp:266] [2110] endstop_name y tt 2174.372301916667 trigger_time 2174.372301916667 move_end_print_time 2174.6243864166668 +[2026-05-03 09:57:17.524] [info] [homing.cpp:266] [2110] endstop_name y tt 2174.372301916667 trigger_time 2174.372301916667 move_end_print_time 2174.6243864166668 +[2026-05-03 09:57:17.524] [info] [homing.cpp:309] [2110] stepper_name stepper_y over_steps 0 halt_pos 16814 start_pos -4003 trig_pos 16814 +[2026-05-03 09:57:17.524] [info] [homing.cpp:309] [2110] stepper_name stepper_x over_steps 0 halt_pos -24820 start_pos -4003 trig_pos -24820 +[2026-05-03 09:57:17.557] [info] [stepper.cpp:573] [2110] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 09:57:18.162] [info] [gcode_move.cpp:638] [2110] cmd_M114 X:7.988 Y:8.000 Z:-0.123 E:0.000 +[2026-05-03 09:57:18.164] [info] [gcode_move.cpp:638] [2110] cmd_M114 X:7.988 Y:8.000 Z:-0.123 E:0.000 +[2026-05-03 09:57:18.165] [info] [stepper.cpp:573] [2110] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 09:57:18.205] [info] [homing.cpp:152] [2110] kin_spos name stepper_x command_position 393.75 +[2026-05-03 09:57:18.205] [info] [homing.cpp:152] [2110] kin_spos name stepper_y command_position 377.75 +[2026-05-03 09:57:18.205] [info] [homing.cpp:152] [2110] kin_spos name stepper_z command_position 0 +[2026-05-03 09:57:18.657] [info] [mcu.cpp:390] [2162] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 09:57:18.688] [info] [mcu.cpp:634] [2110] home_wait pin_value:1 next_clock:52212616606 +[2026-05-03 09:57:18.689] [info] [homing.cpp:266] [2110] endstop_name x tt 2175.52548425 trigger_time 2175.52548425 move_end_print_time 2175.77738375 +[2026-05-03 09:57:18.690] [info] [homing.cpp:266] [2110] endstop_name x tt 2175.52548425 trigger_time 2175.52548425 move_end_print_time 2175.77738375 +[2026-05-03 09:57:18.691] [info] [homing.cpp:309] [2110] stepper_name stepper_x over_steps 0 halt_pos -24805 start_pos -24017 trig_pos -24805 +[2026-05-03 09:57:18.691] [info] [homing.cpp:309] [2110] stepper_name stepper_y over_steps 0 halt_pos 15223 start_pos 16011 trig_pos 15223 +[2026-05-03 09:57:18.722] [info] [stepper.cpp:573] [2110] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 09:57:19.329] [info] [gcode_move.cpp:638] [2110] cmd_M114 X:8.000 Y:8.000 Z:-0.123 E:0.000 +[2026-05-03 09:57:19.330] [info] [gcode_move.cpp:638] [2110] cmd_M114 X:8.000 Y:8.000 Z:-0.123 E:0.000 +[2026-05-03 09:57:19.331] [info] [stepper.cpp:573] [2110] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 09:57:19.363] [info] [homing.cpp:152] [2110] kin_spos name stepper_x command_position 414 +[2026-05-03 09:57:19.363] [info] [homing.cpp:152] [2110] kin_spos name stepper_y command_position -398 +[2026-05-03 09:57:19.363] [info] [homing.cpp:152] [2110] kin_spos name stepper_z command_position 0 +[2026-05-03 09:57:19.815] [info] [mcu.cpp:390] [2162] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 09:57:19.835] [info] [mcu.cpp:634] [2110] home_wait pin_value:1 next_clock:52240419714 +[2026-05-03 09:57:19.835] [info] [homing.cpp:266] [2110] endstop_name y tt 2176.683947125 trigger_time 2176.683947125 move_end_print_time 2176.9362817083334 +[2026-05-03 09:57:19.836] [info] [homing.cpp:266] [2110] endstop_name y tt 2176.683947125 trigger_time 2176.683947125 move_end_print_time 2176.9362817083334 +[2026-05-03 09:57:19.836] [info] [homing.cpp:309] [2110] stepper_name stepper_y over_steps 0 halt_pos 16814 start_pos 16026 trig_pos 16814 +[2026-05-03 09:57:19.836] [info] [homing.cpp:309] [2110] stepper_name stepper_x over_steps 0 halt_pos -24790 start_pos -24002 trig_pos -24790 +[2026-05-03 09:57:19.867] [info] [stepper.cpp:573] [2110] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 09:57:19.868] [info] [gcode_move.cpp:638] [2110] cmd_M114 X:8.000 Y:8.000 Z:-0.123 E:0.000 +[2026-05-03 09:57:20.421] [info] [gcode.cpp:598] [2110] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 09:57:20.707] [info] [gcode.cpp:598] [2110] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 09:57:20.709] [info] [homing_override.cpp:399] [2110] manual_move z start +[2026-05-03 09:57:20.709] [info] [homing_override.cpp:401] [2110] manual_move z over +[2026-05-03 09:57:20.710] [info] [homing_override.cpp:422] [2110] prev_G28 z start +[2026-05-03 09:57:20.741] [info] [homing.cpp:152] [2110] kin_spos name stepper_x command_position 316.5 +[2026-05-03 09:57:20.741] [info] [homing.cpp:152] [2110] kin_spos name stepper_y command_position -211.5 +[2026-05-03 09:57:20.741] [info] [homing.cpp:152] [2110] kin_spos name stepper_z command_position 383.714709 +[2026-05-03 09:57:22.051] [info] [mcu.cpp:712] [2110] set_digital pin PE12 2179.089215603125 2224.730677935 +[2026-05-03 09:57:29.669] [info] [mcu.cpp:390] [2162] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 09:57:29.683] [info] [mcu.cpp:634] [2110] home_wait pin_value:1 next_clock:52476923174 +[2026-05-03 09:57:29.684] [info] [homing.cpp:266] [2110] endstop_name z tt 2186.538215583333 trigger_time 2186.538215583333 move_end_print_time 2186.79029225 +[2026-05-03 09:57:29.684] [info] [homing.cpp:309] [2110] stepper_name stepper_z over_steps 0 halt_pos -29696 start_pos 0 trig_pos -29696 +[2026-05-03 09:57:29.686] [info] [homing.cpp:152] [2110] kin_spos name stepper_x command_position 316.5 +[2026-05-03 09:57:29.687] [info] [homing.cpp:152] [2110] kin_spos name stepper_y command_position -211.5 +[2026-05-03 09:57:29.687] [info] [homing.cpp:152] [2110] kin_spos name stepper_z command_position 10.570582 +[2026-05-03 09:57:30.665] [info] [mcu.cpp:390] [2162] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 09:57:30.677] [info] [mcu.cpp:634] [2110] home_wait pin_value:1 next_clock:52500823014 +[2026-05-03 09:57:30.677] [info] [homing.cpp:266] [2110] endstop_name z tt 2187.53379225 trigger_time 2187.53379225 move_end_print_time 2187.7857917916667 +[2026-05-03 09:57:30.677] [info] [homing.cpp:309] [2110] stepper_name stepper_z over_steps 0 halt_pos -29696 start_pos -28896 trig_pos -29696 +[2026-05-03 09:57:30.678] [info] [z_compensation.cpp:264] [2110] ZCompensation handle_home_rails_end +[2026-05-03 09:57:30.678] [info] [z_compensation.cpp:92] [2110] use_fix_ref_temperature true fix_ref_temperature 140 ref_temperature 141.58418795619514 +[2026-05-03 09:57:30.679] [info] [homing_override.cpp:424] [2110] prev_G28 z over +[2026-05-03 09:57:30.679] [info] [homing_override.cpp:426] [2110] manual_move z start +[2026-05-03 09:57:30.679] [info] [homing_override.cpp:438] [2110] manual_move z over +[2026-05-03 09:57:30.680] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"2802"} +[2026-05-03 09:57:30.680] [info] [device_status.cpp:989] [2117] M2202 result_code:2802 +[2026-05-03 09:57:30.680] [info] [device_status.cpp:1674] [2110] Device status change to: 1, last status: 10 +[2026-05-03 09:57:41.109] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 09:57:41.110] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 09:58:11.244] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 09:58:11.245] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 09:58:41.343] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 09:58:41.344] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 09:58:46.281] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=2308.957745017,time_avg=2279.42034169585,freq=119998235.849331,diff=71144.45275878906(0.0005928704396565755),stddev=2766.4255248466857 +[2026-05-03 09:59:10.584] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:2287.453784900732,last_temp:140.52978874273026,temp:140.52978874273026,target_temp:140,smoothed_temp:140.230264790027 +[2026-05-03 09:59:11.400] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 09:59:11.401] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 09:59:11.908] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:2288.77800000038,last_temp:29.59444825219697,temp:29.59444825219697,target_temp:0,smoothed_temp:29.610852042789077 +[2026-05-03 09:59:14.830] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=2337.5076297809997,time_avg=2307.590602221485,freq=119998231.53897445,diff=75432.92065429688(0.0006286076721191406),stddev=2118.401695762824 +[2026-05-03 09:59:41.450] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 09:59:41.451] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 09:59:42.396] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 10:00:11.506] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:00:11.507] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:00:41.559] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:00:41.559] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:01:10.586] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:2407.455538845439,last_temp:139.58341413639738,temp:139.58341413639738,target_temp:140,smoothed_temp:139.52364647578548 +[2026-05-03 10:01:11.609] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:01:11.610] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:01:12.408] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:2409.27800000038,last_temp:29.477673160862707,temp:29.477673160862707,target_temp:0,smoothed_temp:29.497414131287986 +[2026-05-03 10:01:41.666] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:01:41.667] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:01:42.529] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 10:02:11.722] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:02:11.723] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:02:31.801] [info] [extruder.cpp:493] [2110] cmd_M104 temp 0 index -1 wait false +[2026-05-03 10:02:31.802] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:0,wait:false +[2026-05-03 10:02:31.802] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:02:41.779] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:02:41.779] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:03:07.623] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 10:03:10.587] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:2527.457261735874,last_temp:120.848491959341,temp:120.848491959341,target_temp:0,smoothed_temp:121.06511371031343 +[2026-05-03 10:03:11.829] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:03:11.830] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:03:12.907] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:2529.77800000038,last_temp:29.35612255869154,temp:29.35612255869154,target_temp:0,smoothed_temp:29.37203793400949 +[2026-05-03 10:03:39.699] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=2602.378916407,half_rtt=0.0002562915001362853,freq=119998309.84988992 +[2026-05-03 10:03:41.882] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:03:41.883] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:03:42.653] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 10:04:11.940] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:04:11.940] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:04:16.124] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:04:41.990] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:04:41.991] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:05:00.429] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 10:05:10.588] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:2647.458968547602,last_temp:81.78351003870853,temp:81.78351003870853,target_temp:0,smoothed_temp:81.8717717198639 +[2026-05-03 10:05:12.040] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:05:12.040] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:05:12.240] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=2694.919415951,time_avg=2665.386749081951,freq=119998298.20162876,diff=70650.80395507812(0.000588756699625651),stddev=2872.2267497457347 +[2026-05-03 10:05:13.407] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:2650.27800000038,last_temp:29.23427975146268,temp:29.23427975146268,target_temp:0,smoothed_temp:29.2371762185205 +[2026-05-03 10:05:42.089] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:05:42.090] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:05:57.526] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=2740.206604348,half_rtt=0.00025639550017331203,freq=119998298.65136012 +[2026-05-03 10:06:12.140] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:06:12.141] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:06:34.937] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=2777.6175663649997,half_rtt=0.00025183350021507067,freq=119998302.28090014 +[2026-05-03 10:06:35.919] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:06:42.191] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:06:42.192] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:06:56.598] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=2799.276990417,time_avg=2769.713879636965,freq=119998300.2408343,diff=88048.79541015625(0.000733739961751302),stddev=2093.7090178308918 +[2026-05-03 10:07:10.590] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:2767.4606600888706,last_temp:59.870206861838824,temp:59.870206861838824,target_temp:0,smoothed_temp:59.986185597590584 +[2026-05-03 10:07:12.250] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:07:12.250] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:07:13.907] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:2770.77800000038,last_temp:29.098552802039194,temp:29.098552802039194,target_temp:0,smoothed_temp:29.10455503897117 +[2026-05-03 10:07:42.301] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:07:42.302] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:08:05.511] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:08:12.353] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:08:12.354] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:08:41.942] [info] [clocksync.cpp:219] [2162] mcu 'mcu': Ignoring clock sample: sent_time=2904.621817884,time_avg=2875.084827403041,freq=23999998.079453025,diff=18685.801231384277(0.0007785750513076783),stddev=386.48095938822934 +[2026-05-03 10:08:41.942] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=2904.6220969260003,time_avg=2875.0850479247806,freq=119998673.1351412,diff=67351.8911743164(0.0005612657597859701),stddev=5580.844850952838 +[2026-05-03 10:08:42.411] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:08:42.412] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:09:10.591] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:2887.462312144184,last_temp:48.33996222425935,temp:48.33996222425935,target_temp:0,smoothed_temp:48.36259865809099 +[2026-05-03 10:09:12.472] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:09:12.472] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:09:14.407] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:2891.27800000038,last_temp:28.976084055154615,temp:28.976084055154615,target_temp:0,smoothed_temp:28.979488341855372 +[2026-05-03 10:09:35.108] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=2957.7877885350003,time_avg=2928.08759827544,freq=119998643.06129757,diff=69280.72473144531(0.0005773393727620443),stddev=2900.7511948640845 +[2026-05-03 10:09:37.076] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 10:09:42.533] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:09:42.534] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:09:51.849] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:10:12.589] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:10:12.590] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:10:42.640] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:10:42.641] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:11:10.593] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:3007.464036090858,last_temp:44.02611353606454,temp:44.02611353606454,target_temp:0,smoothed_temp:44.11863326740613 +[2026-05-03 10:11:12.695] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:11:12.696] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:11:14.906] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:3011.77800000038,last_temp:28.75305553014732,temp:28.75305553014732,target_temp:0,smoothed_temp:28.752219855338524 +[2026-05-03 10:11:42.119] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:11:42.707] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:11:42.707] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:12:12.761] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:12:12.761] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:12:32.355] [info] [heater_bed.cpp:57] [2110] cmd_M140 temp 0 wait false +[2026-05-03 10:12:32.355] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:0,wait:false +[2026-05-03 10:12:32.355] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:12:32.355] [info] [idle_timeout.cpp:294] [2110] Device idle, activating heated bed protection. +[2026-05-03 10:12:42.808] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:12:42.809] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:13:10.594] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:3127.4657111665406,last_temp:41.50674592841324,temp:41.50674592841324,target_temp:0,smoothed_temp:41.51505803551683 +[2026-05-03 10:13:12.868] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:13:12.869] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:13:15.405] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:3132.27800000038,last_temp:28.5702448975739,temp:28.5702448975739,target_temp:0,smoothed_temp:28.5751481824948 +[2026-05-03 10:13:33.367] [info] [clocksync.cpp:206] [2162] mcu 'mcu': New minimum RTT: sent_time=3196.049851232,half_rtt=7.550000009359792e-05,freq=23999998.80279336 +[2026-05-03 10:13:34.359] [info] [clocksync.cpp:219] [2162] mcu 'mcu': Ignoring clock sample: sent_time=3197.040313232,time_avg=3167.5006491416834,freq=23999998.017478433,diff=12302.70475769043(0.0005126126982371012),stddev=339.40729366357226 +[2026-05-03 10:13:42.928] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:13:42.928] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:14:12.979] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:14:12.980] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:14:14.727] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=3237.40829396,time_avg=3207.870400478685,freq=119998300.59328224,diff=76018.54821777344(0.0006334879018147786),stddev=2762.244927457993 +[2026-05-03 10:14:30.479] [info] [clocksync.cpp:219] [2162] mcu 'mcu': Ignoring clock sample: sent_time=3253.161317217,time_avg=3223.475711924774,freq=24000002.252164286,diff=12812.315460205078(0.0005338464775085449),stddev=1407.4243445689826 +[2026-05-03 10:14:42.988] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:14:42.988] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_response +[2026-05-03 10:15:10.595] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:3247.467408053012,last_temp:39.2262361779039,temp:39.2262361779039,target_temp:0,smoothed_temp:39.214384274986294 +[2026-05-03 10:15:15.905] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:3252.77800000038,last_temp:28.501515793744545,temp:28.501515793744545,target_temp:0,smoothed_temp:28.481221592282314 +[2026-05-03 10:15:53.134] [warning] [mqtt_connector.cpp:503] [2168] Client 0clica583f has not communicated for a long time, removing it. +[2026-05-03 10:15:53.134] [info] [mqtt_connector.cpp:115] [2168] Unsubscribed from topic: elegoo/F01CFFQQFN55YKS/0clica583f/api_request +[2026-05-03 10:16:02.037] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=3344.719620803,half_rtt=0.00025195800003530167,freq=119998310.75758687 +[2026-05-03 10:17:10.596] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:3367.469075064358,last_temp:37.284476277966405,temp:37.284476277966405,target_temp:0,smoothed_temp:37.358777483581484 +[2026-05-03 10:17:16.404] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:3373.27800000038,last_temp:28.322368141828008,temp:28.322368141828008,target_temp:0,smoothed_temp:28.326353123683848 +[2026-05-03 10:17:30.651] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 10:17:33.105] [info] [extruder.cpp:493] [2110] cmd_M104 temp 0 index -1 wait false +[2026-05-03 10:17:33.106] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:0,wait:false +[2026-05-03 10:17:33.106] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:18:28.736] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 10:18:34.233] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 10:19:10.597] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:3487.470758262129,last_temp:36.22290220154048,temp:36.22290220154048,target_temp:0,smoothed_temp:36.2180300973626 +[2026-05-03 10:19:16.904] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:3493.77800000038,last_temp:28.188728406506414,temp:28.188728406506414,target_temp:0,smoothed_temp:28.198003755423706 +[2026-05-03 10:19:58.331] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 10:20:20.365] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 10:21:10.598] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:3607.472426695788,last_temp:35.53490686224143,temp:35.53490686224143,target_temp:0,smoothed_temp:35.41152521952438 +[2026-05-03 10:21:17.404] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:3614.27800000038,last_temp:28.0824762739029,temp:28.0824762739029,target_temp:0,smoothed_temp:28.08275401983912 +[2026-05-03 10:22:35.024] [info] [http_server.cpp:466] [2276] System info retrieved successfully. +[2026-05-03 10:22:35.147] [info] [http_server.cpp:482] [2276] Current token: miM2yt, request token: miM2yt +[2026-05-03 10:22:35.147] [info] [http_server.cpp:582] [2276] Client 192.168.0.244:52472 added successfully. Total clients: 1 +[2026-05-03 10:22:35.147] [info] [http_server.cpp:223] [2276] Handling file upload request from client: 192.168.0.244:52472, file name: ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-03 10:22:35.147] [info] [http_server.cpp:274] [2276] File upload range: 0-1048575 of total 3798771 +[2026-05-03 10:22:35.148] [info] [http_server.cpp:309] [2276] Local file size: -1 +[2026-05-03 10:22:35.149] [info] [http_server.cpp:344] [2276] Writing file size: 1048576 +[2026-05-03 10:22:35.225] [info] [http_server.cpp:369] [2276] Upload task added: 192.168.0.244:52472ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-03 10:22:35.226] [info] [timer_manager.cpp:72] [2276] Adding timer task: HTTPServer_check_upload_timeout_task, interval: 5000 ms, repeat: true +[2026-05-03 10:22:35.226] [info] [http_server.cpp:374] [2276] Upload timeout task added: kUploadTimeout 5000 ms, kCheckUploadTaskNameHTTPServer_check_upload_timeout_task +[2026-05-03 10:22:35.226] [info] [http_server.cpp:410] [2276] File uploaded successfully: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-03 10:22:35.315] [info] [http_server.cpp:482] [2276] Current token: miM2yt, request token: miM2yt +[2026-05-03 10:22:35.316] [info] [http_server.cpp:223] [2276] Handling file upload request from client: 192.168.0.244:52472, file name: ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-03 10:22:35.316] [info] [http_server.cpp:274] [2276] File upload range: 1048576-2097151 of total 3798771 +[2026-05-03 10:22:35.316] [info] [http_server.cpp:309] [2276] Local file size: 1048576 +[2026-05-03 10:22:35.316] [info] [http_server.cpp:344] [2276] Writing file size: 1048576 +[2026-05-03 10:22:35.381] [info] [http_server.cpp:410] [2276] File uploaded successfully: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-03 10:22:35.456] [info] [http_server.cpp:482] [2276] Current token: miM2yt, request token: miM2yt +[2026-05-03 10:22:35.456] [info] [http_server.cpp:223] [2276] Handling file upload request from client: 192.168.0.244:52472, file name: ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-03 10:22:35.456] [info] [http_server.cpp:274] [2276] File upload range: 2097152-3145727 of total 3798771 +[2026-05-03 10:22:35.456] [info] [http_server.cpp:309] [2276] Local file size: 2097152 +[2026-05-03 10:22:35.457] [info] [http_server.cpp:344] [2276] Writing file size: 1048576 +[2026-05-03 10:22:35.523] [info] [http_server.cpp:410] [2276] File uploaded successfully: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-03 10:22:35.570] [info] [http_server.cpp:482] [2276] Current token: miM2yt, request token: miM2yt +[2026-05-03 10:22:35.571] [info] [http_server.cpp:223] [2276] Handling file upload request from client: 192.168.0.244:52472, file name: ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-03 10:22:35.571] [info] [http_server.cpp:274] [2276] File upload range: 3145728-3798770 of total 3798771 +[2026-05-03 10:22:35.571] [info] [http_server.cpp:309] [2276] Local file size: 3145728 +[2026-05-03 10:22:35.571] [info] [http_server.cpp:344] [2276] Writing file size: 653043 +[2026-05-03 10:22:35.613] [info] [http_server.cpp:594] [2276] Client 192.168.0.244:52472 removed successfully. Remaining clients: 0 +[2026-05-03 10:22:35.613] [info] [http_server.cpp:388] [2276] File upload completed for client: 192.168.0.244:52472 +[2026-05-03 10:22:35.614] [info] [device_status.cpp:1674] [2276] Device status change to: 1, last status: 11 +[2026-05-03 10:22:35.615] [info] [timer_manager.cpp:122] [2276] Removing timer task: HTTPServer_check_upload_timeout_task +[2026-05-03 10:22:35.616] [info] [device_ui_message_handle.cpp:360] [2276] file manager request: {"action":"add","files":["ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode"],"script":"file_manager"} +[2026-05-03 10:22:35.616] [info] [device_ui_message_handle.cpp:385] [2276] sync info request: {"id":1,"method":"sync_info","params":{"action":"add","files":["ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode"],"script":"file_manager"}} +[2026-05-03 10:22:35.618] [info] [record_manager.cpp:496] [2276] Parsing local file: ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-03 10:22:35.618] [info] [record_manager.cpp:40] [2276] GcodeParser open file: /opt/usr/gcode/local//ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-03 10:22:35.622] [info] [record_manager.cpp:383] [2276] color map size: 1 +[2026-05-03 10:22:35.622] [info] [sql_database.cpp:97] [2276] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 10:22:35.635] [info] [sql_database.cpp:97] [2276] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-05-03 10:22:35.649] [info] [record_manager.cpp:512] [2276] Parsed file: ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode, size: 3798771, layer: 42, print_time: 10791, total_filament_used: 38.91, color_map size: 1 +[2026-05-03 10:22:35.650] [info] [http_server.cpp:410] [2276] File uploaded successfully: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-03 10:23:10.599] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:3727.4740887588614,last_temp:34.13204710364272,temp:34.13204710364272,target_temp:0,smoothed_temp:34.3965103958047 +[2026-05-03 10:23:17.903] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:3734.77800000038,last_temp:27.99915941971193,temp:27.99915941971193,target_temp:0,smoothed_temp:27.988620801094992 +[2026-05-03 10:23:28.049] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=3790.732767932,time_avg=3761.187120905806,freq=119998692.87621318,diff=62418.653869628906(0.0005201554489135742),stddev=1618.6942825367341 +[2026-05-03 10:23:56.604] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 10:24:03.530] [info] [http_server.cpp:466] [2273] System info retrieved successfully. +[2026-05-03 10:24:25.153] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 10:24:26.137] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=3848.821459626,half_rtt=0.00025212500008819916,freq=119998326.1091255 +[2026-05-03 10:24:55.412] [info] [http_server.cpp:466] [2276] System info retrieved successfully. +[2026-05-03 10:24:55.432] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/api_register + Payload: {"request_id":"0cli72d16f","client_id":"0cli72d16f"} +[2026-05-03 10:24:55.433] [info] [mqtt_connector.cpp:529] [2275] client_id: 0cli72d16f, request_id: 0cli72d16f +[2026-05-03 10:24:55.433] [info] [mqtt_connector.cpp:537] [2275] request_topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/register_response +[2026-05-03 10:24:55.433] [info] [mqtt_connector.cpp:554] [2275] subscribe topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_request +[2026-05-03 10:24:55.496] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_request + Payload: {"method":1036,"id":1} +[2026-05-03 10:24:55.497] [info] [api_printer.cpp:2104] [2275] add host task 1036 +[2026-05-03 10:24:55.498] [info] [api_printer.cpp:2058] [2173] process_request1036 +[2026-05-03 10:24:55.498] [info] [device_status.cpp:449] [2173] get history tasks +[2026-05-03 10:24:55.498] [info] [device_status.cpp:458] [2173] Total tasks: 1 +[2026-05-03 10:24:55.499] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_request + Payload: {"method":2005,"id":2} +[2026-05-03 10:24:55.500] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_response +[2026-05-03 10:24:55.501] [info] [api_printer.cpp:2104] [2275] add host task 2005 +[2026-05-03 10:24:55.502] [info] [api_printer.cpp:2058] [2173] process_request2005 +[2026-05-03 10:24:55.504] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_request + Payload: {"method":1044,"params":{"storage_media":"local","offset":0,"limit":20},"id":3} +[2026-05-03 10:24:55.504] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_response +[2026-05-03 10:24:55.505] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 10:24:55.506] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_request + Payload: {"method":1002,"id":4} +[2026-05-03 10:24:55.507] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 10:24:55.507] [info] [record_manager.cpp:782] [2173] Getting local files details, total: 10 +[2026-05-03 10:24:55.507] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 10:24:55.515] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_response +[2026-05-03 10:24:55.517] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 10:24:55.517] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 10:24:55.519] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_response +[2026-05-03 10:24:55.604] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_request + Payload: {"method":1044,"params":{"storage_media":"u-disk","dir":"/","offset":0,"limit":20},"id":5} +[2026-05-03 10:24:55.605] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 10:24:55.606] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 10:24:55.606] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_request + Payload: {"method":1001,"id":6} +[2026-05-03 10:24:55.607] [info] [api_printer.cpp:2104] [2275] add host task 1001 +[2026-05-03 10:24:55.608] [error] [device_status.cpp:1366] [2173] U-disk is not mounted +[2026-05-03 10:24:55.609] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_response +[2026-05-03 10:24:55.610] [info] [api_printer.cpp:2058] [2173] process_request1001 +[2026-05-03 10:24:55.610] [info] [api_printer.cpp:601] [2173] handle_get_system_info +[2026-05-03 10:24:55.611] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_response +[2026-05-03 10:24:55.714] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_request + Payload: {"method":1042,"id":7} +[2026-05-03 10:24:55.715] [info] [api_printer.cpp:2104] [2275] add host task 1042 +[2026-05-03 10:24:55.715] [info] [api_printer.cpp:2058] [2173] process_request1042 +[2026-05-03 10:24:55.716] [info] [device_status.cpp:436] [2173] get monitor video info: {"url":"http://192.168.0.79:8080/?action=stream"} +[2026-05-03 10:24:55.716] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_response +[2026-05-03 10:25:10.601] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:3847.4757418280747,last_temp:33.913877604047514,temp:33.913877604047514,target_temp:0,smoothed_temp:33.897097512479924 +[2026-05-03 10:25:12.750] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_request + Payload: {"method":1045,"params":{"storage_media":"local","file_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode"},"id":8} +[2026-05-03 10:25:12.752] [info] [api_printer.cpp:2104] [2275] add host task 1045 +[2026-05-03 10:25:12.752] [info] [api_printer.cpp:2058] [2173] process_request1045 +[2026-05-03 10:25:12.754] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_response +[2026-05-03 10:25:12.901] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_request + Payload: {"method":1046,"params":{"storage_media":"local","filename":"ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode"},"id":9} +[2026-05-03 10:25:12.904] [info] [api_printer.cpp:2104] [2275] add host task 1046 +[2026-05-03 10:25:12.904] [info] [api_printer.cpp:2058] [2173] process_request1046 +[2026-05-03 10:25:12.905] [info] [device_status.cpp:1347] [2173] color map size: 1 +[2026-05-03 10:25:12.905] [info] [device_status.cpp:1353] [2173] jcolor {"color":"#26A69A","name":"PETG","t":0} +[2026-05-03 10:25:12.905] [info] [device_status.cpp:1359] [2173] get local file: {"color_map":[{"color":"#26A69A","name":"PETG","t":0}],"create_time":1777774955,"filename":"ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode","last_print_time":0,"layer":42,"print_time":10791,"size":3798771,"total_filament_used":38.91,"total_print_times":0} +[2026-05-03 10:25:12.906] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_response +[2026-05-03 10:25:18.403] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:3855.27800000038,last_temp:27.906416048214112,temp:27.906416048214112,target_temp:0,smoothed_temp:27.898611252309202 +[2026-05-03 10:25:42.914] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_request + Payload: {"type":"PING"} +[2026-05-03 10:25:42.915] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_response +[2026-05-03 10:26:35.122] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:26:53.134] [warning] [mqtt_connector.cpp:503] [2167] Client 0cli72d16f has not communicated for a long time, removing it. +[2026-05-03 10:26:53.134] [info] [mqtt_connector.cpp:115] [2167] Unsubscribed from topic: elegoo/F01CFFQQFN55YKS/0cli72d16f/api_request +[2026-05-03 10:27:10.602] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:3967.4773905446636,last_temp:33.527801521408435,temp:33.527801521408435,target_temp:0,smoothed_temp:33.53539686445082 +[2026-05-03 10:27:18.902] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:3975.77800000038,last_temp:27.827443321674934,temp:27.827443321674934,target_temp:0,smoothed_temp:27.820289156661545 +[2026-05-03 10:27:24.353] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 10:27:33.657] [info] [heater_bed.cpp:57] [2110] cmd_M140 temp 0 wait false +[2026-05-03 10:27:33.657] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:0,wait:false +[2026-05-03 10:27:33.657] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:27:33.658] [info] [idle_timeout.cpp:294] [2110] Device idle, activating heated bed protection. +[2026-05-03 10:28:08.909] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 10:28:58.014] [info] [http_server.cpp:466] [2276] System info retrieved successfully. +[2026-05-03 10:28:58.131] [info] [http_server.cpp:482] [2273] Current token: miM2yt, request token: miM2yt +[2026-05-03 10:28:58.132] [info] [http_server.cpp:582] [2273] Client 192.168.0.244:39082 added successfully. Total clients: 1 +[2026-05-03 10:28:58.132] [info] [http_server.cpp:223] [2273] Handling file upload request from client: 192.168.0.244:39082, file name: ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:28:58.132] [info] [http_server.cpp:274] [2273] File upload range: 0-1048575 of total 3643591 +[2026-05-03 10:28:58.132] [info] [http_server.cpp:309] [2273] Local file size: -1 +[2026-05-03 10:28:58.141] [info] [http_server.cpp:344] [2273] Writing file size: 1048576 +[2026-05-03 10:28:58.224] [info] [http_server.cpp:369] [2273] Upload task added: 192.168.0.244:39082ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:28:58.224] [info] [timer_manager.cpp:72] [2273] Adding timer task: HTTPServer_check_upload_timeout_task, interval: 5000 ms, repeat: true +[2026-05-03 10:28:58.224] [info] [http_server.cpp:374] [2273] Upload timeout task added: kUploadTimeout 5000 ms, kCheckUploadTaskNameHTTPServer_check_upload_timeout_task +[2026-05-03 10:28:58.225] [info] [http_server.cpp:410] [2273] File uploaded successfully: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:28:58.308] [info] [http_server.cpp:482] [2273] Current token: miM2yt, request token: miM2yt +[2026-05-03 10:28:58.308] [info] [http_server.cpp:223] [2273] Handling file upload request from client: 192.168.0.244:39082, file name: ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:28:58.309] [info] [http_server.cpp:274] [2273] File upload range: 1048576-2097151 of total 3643591 +[2026-05-03 10:28:58.309] [info] [http_server.cpp:309] [2273] Local file size: 1048576 +[2026-05-03 10:28:58.309] [info] [http_server.cpp:344] [2273] Writing file size: 1048576 +[2026-05-03 10:28:58.374] [info] [http_server.cpp:410] [2273] File uploaded successfully: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:28:58.445] [info] [http_server.cpp:482] [2273] Current token: miM2yt, request token: miM2yt +[2026-05-03 10:28:58.446] [info] [http_server.cpp:223] [2273] Handling file upload request from client: 192.168.0.244:39082, file name: ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:28:58.446] [info] [http_server.cpp:274] [2273] File upload range: 2097152-3145727 of total 3643591 +[2026-05-03 10:28:58.446] [info] [http_server.cpp:309] [2273] Local file size: 2097152 +[2026-05-03 10:28:58.447] [info] [http_server.cpp:344] [2273] Writing file size: 1048576 +[2026-05-03 10:28:58.519] [info] [http_server.cpp:410] [2273] File uploaded successfully: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:28:58.561] [info] [http_server.cpp:482] [2273] Current token: miM2yt, request token: miM2yt +[2026-05-03 10:28:58.561] [info] [http_server.cpp:223] [2273] Handling file upload request from client: 192.168.0.244:39082, file name: ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:28:58.561] [info] [http_server.cpp:274] [2273] File upload range: 3145728-3643590 of total 3643591 +[2026-05-03 10:28:58.561] [info] [http_server.cpp:309] [2273] Local file size: 3145728 +[2026-05-03 10:28:58.561] [info] [http_server.cpp:344] [2273] Writing file size: 497863 +[2026-05-03 10:28:58.594] [info] [http_server.cpp:594] [2273] Client 192.168.0.244:39082 removed successfully. Remaining clients: 0 +[2026-05-03 10:28:58.594] [info] [http_server.cpp:388] [2273] File upload completed for client: 192.168.0.244:39082 +[2026-05-03 10:28:58.595] [info] [device_status.cpp:1674] [2273] Device status change to: 1, last status: 11 +[2026-05-03 10:28:58.596] [info] [timer_manager.cpp:122] [2273] Removing timer task: HTTPServer_check_upload_timeout_task +[2026-05-03 10:28:58.596] [info] [device_ui_message_handle.cpp:360] [2273] file manager request: {"action":"add","files":["ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode"],"script":"file_manager"} +[2026-05-03 10:28:58.597] [info] [device_ui_message_handle.cpp:385] [2273] sync info request: {"id":2,"method":"sync_info","params":{"action":"add","files":["ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode"],"script":"file_manager"}} +[2026-05-03 10:28:58.597] [info] [record_manager.cpp:496] [2273] Parsing local file: ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:28:58.598] [info] [record_manager.cpp:40] [2273] GcodeParser open file: /opt/usr/gcode/local//ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:28:58.602] [info] [record_manager.cpp:383] [2273] color map size: 1 +[2026-05-03 10:28:58.603] [info] [sql_database.cpp:97] [2273] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 10:28:58.617] [info] [sql_database.cpp:97] [2273] Insert SQL: INSERT INTO file_thumbnail (filename, thumbnail, upload_flag) VALUES (?, ?, ?); +[2026-05-03 10:28:58.632] [info] [record_manager.cpp:512] [2273] Parsed file: ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode, size: 3643591, layer: 42, print_time: 10743, total_filament_used: 36.45, color_map size: 1 +[2026-05-03 10:28:58.632] [info] [http_server.cpp:410] [2273] File uploaded successfully: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:29:02.143] [info] [http_server.cpp:466] [2276] System info retrieved successfully. +[2026-05-03 10:29:02.161] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/api_register + Payload: {"request_id":"0cliae9f23","client_id":"0cliae9f23"} +[2026-05-03 10:29:02.161] [info] [mqtt_connector.cpp:529] [2275] client_id: 0cliae9f23, request_id: 0cliae9f23 +[2026-05-03 10:29:02.161] [info] [mqtt_connector.cpp:537] [2275] request_topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/register_response +[2026-05-03 10:29:02.162] [info] [mqtt_connector.cpp:554] [2275] subscribe topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request +[2026-05-03 10:29:02.228] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1036,"id":1} +[2026-05-03 10:29:02.230] [info] [api_printer.cpp:2104] [2275] add host task 1036 +[2026-05-03 10:29:02.231] [info] [api_printer.cpp:2058] [2173] process_request1036 +[2026-05-03 10:29:02.231] [info] [device_status.cpp:449] [2173] get history tasks +[2026-05-03 10:29:02.231] [info] [device_status.cpp:458] [2173] Total tasks: 1 +[2026-05-03 10:29:02.232] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:29:02.233] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":2005,"id":2} +[2026-05-03 10:29:02.235] [info] [api_printer.cpp:2104] [2275] add host task 2005 +[2026-05-03 10:29:02.237] [info] [api_printer.cpp:2058] [2173] process_request2005 +[2026-05-03 10:29:02.237] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1044,"params":{"storage_media":"local","offset":0,"limit":20},"id":3} +[2026-05-03 10:29:02.238] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 10:29:02.239] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:29:02.239] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1002,"id":4} +[2026-05-03 10:29:02.241] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 10:29:02.242] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 10:29:02.243] [info] [record_manager.cpp:782] [2173] Getting local files details, total: 11 +[2026-05-03 10:29:02.249] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:29:02.251] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 10:29:02.252] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 10:29:02.254] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:29:02.375] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1044,"params":{"storage_media":"u-disk","dir":"/","offset":0,"limit":20},"id":5} +[2026-05-03 10:29:02.377] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 10:29:02.377] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 10:29:02.378] [error] [device_status.cpp:1366] [2173] U-disk is not mounted +[2026-05-03 10:29:02.378] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:29:02.379] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1001,"id":6} +[2026-05-03 10:29:02.380] [info] [api_printer.cpp:2104] [2275] add host task 1001 +[2026-05-03 10:29:02.381] [info] [api_printer.cpp:2058] [2173] process_request1001 +[2026-05-03 10:29:02.382] [info] [api_printer.cpp:601] [2173] handle_get_system_info +[2026-05-03 10:29:02.384] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:29:02.442] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1042,"id":7} +[2026-05-03 10:29:02.443] [info] [api_printer.cpp:2104] [2275] add host task 1042 +[2026-05-03 10:29:02.443] [info] [api_printer.cpp:2058] [2173] process_request1042 +[2026-05-03 10:29:02.444] [info] [device_status.cpp:436] [2173] get monitor video info: {"url":"http://192.168.0.79:8080/?action=stream"} +[2026-05-03 10:29:02.445] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:29:10.603] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:4087.4790459185874,last_temp:32.56651654552212,temp:32.56651654552212,target_temp:0,smoothed_temp:32.74913307739688 +[2026-05-03 10:29:18.769] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1045,"params":{"storage_media":"local","file_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode"},"id":8} +[2026-05-03 10:29:18.771] [info] [api_printer.cpp:2104] [2275] add host task 1045 +[2026-05-03 10:29:18.771] [info] [api_printer.cpp:2058] [2173] process_request1045 +[2026-05-03 10:29:18.775] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:29:18.931] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1046,"params":{"storage_media":"local","filename":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode"},"id":9} +[2026-05-03 10:29:18.932] [info] [api_printer.cpp:2104] [2275] add host task 1046 +[2026-05-03 10:29:18.932] [info] [api_printer.cpp:2058] [2173] process_request1046 +[2026-05-03 10:29:18.933] [info] [device_status.cpp:1347] [2173] color map size: 1 +[2026-05-03 10:29:18.933] [info] [device_status.cpp:1353] [2173] jcolor {"color":"#26A69A","name":"PLA","t":0} +[2026-05-03 10:29:18.933] [info] [device_status.cpp:1359] [2173] get local file: {"color_map":[{"color":"#26A69A","name":"PLA","t":0}],"create_time":1777775338,"filename":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","last_print_time":0,"layer":42,"print_time":10743,"size":3643591,"total_filament_used":36.45,"total_print_times":0} +[2026-05-03 10:29:18.934] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:29:19.402] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:4096.27800000038,last_temp:27.65977594241201,temp:27.65977594241201,target_temp:0,smoothed_temp:27.662779647861946 +[2026-05-03 10:29:30.243] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1020,"params":{"filename":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","storage_media":"local","config":{"delay_video":false,"printer_check":false,"print_layout":"A","bedlevel_force":false,"slot_map":[{"t":0,"canvas_id":0,"tray_id":0}]}},"id":10} +[2026-05-03 10:29:30.246] [info] [api_printer.cpp:2058] [2110] process_request1020 +[2026-05-03 10:29:30.246] [info] [record_manager.cpp:827] [2110] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:29:30.247] [info] [device_ui_message_handle.cpp:339] [2110] sync report: {"id":0,"method":"report_device_status","result":{"delay_video":0}} +[2026-05-03 10:29:30.248] [info] [api_printer.cpp:1583] [2110] bed_mesh_detected value ---: 256 +[2026-05-03 10:29:30.248] [info] [api_printer.cpp:769] [2110] exist bed mesh data for print layout: A +[2026-05-03 10:29:30.248] [info] [api_printer.cpp:1594] [2110] auto_level_force file_name : /opt/usr/gcode/local//ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:29:30.249] [info] [api_printer.cpp:1609] [2110] BED_MESH_CALIBRATE slice_cfg_model_found : true +[2026-05-03 10:29:30.251] [info] [bed_mesh.cpp:638] [2110] execute_calirate_from_slicer 0 +[2026-05-03 10:29:30.251] [info] [api_printer.cpp:2201] [2110] set print color map: CANVAS_SET_COLOR_TABLE T=0 ID=0 CHANNEL=0 +[2026-05-03 10:29:30.252] [info] [mmu.cpp:4462] [2110] Configure channel mapping +[2026-05-03 10:29:30.252] [info] [mmu.cpp:4493] [2110] CMD_canvas_set_color_table #1 T_vec.size 1 table_T 0 table_color 0xFF3700 table_channel 0 +[2026-05-03 10:29:30.253] [info] [mqtt_connector.cpp:486] [2110] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:29:30.256] [info] [api_printer.cpp:2058] [2110] process_request11020 +[2026-05-03 10:29:30.256] [info] [api_printer.cpp:1594] [2110] auto_level_force file_name : /opt/usr/gcode/local//ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:29:30.257] [info] [api_printer.cpp:1609] [2110] BED_MESH_CALIBRATE slice_cfg_model_found : true +[2026-05-03 10:29:30.257] [info] [api_printer.cpp:861] [2110] handle_start_print: SDCARD_PRINT_FILE FILENAME=local/"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode" SLICE_CFG_MODEL=1 +[2026-05-03 10:29:30.259] [info] [virtual_sdcard.cpp:1080] [2110] cmd_SDCARD_PRINT_FILE slice_cfg_model:true auto_det:false filename:local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:29:30.260] [info] [virtual_sdcard.cpp:1027] [2110] _reset_file +[2026-05-03 10:29:30.260] [info] [virtual_sdcard.cpp:966] [2110] do_pause +[2026-05-03 10:29:30.260] [info] [idle_timeout.cpp:138] [2110] handle_print_state print_state:standby +[2026-05-03 10:29:30.261] [info] [virtual_sdcard.cpp:1454] [2110] VirtualSD File opened: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode, Size:3643591 +[2026-05-03 10:29:30.261] [info] [idle_timeout.cpp:138] [2110] handle_print_state print_state:standby +[2026-05-03 10:29:30.261] [info] [device_status.cpp:1669] [2110] Start Printing, clear filename +[2026-05-03 10:29:30.261] [info] [device_status.cpp:1674] [2110] Device status change to: 2, last status: 1 +[2026-05-03 10:29:30.263] [info] [device_status.cpp:2023] [2110] Add print task: id: e716074c-b905-4712-a70b-aa010299b5f5, name: ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode, printer_time: 10743, time lapse: 0 +[2026-05-03 10:29:30.263] [info] [virtual_sdcard.cpp:979] [2110] do_resume +[2026-05-03 10:29:30.263] [info] [virtual_sdcard.cpp:1545] [2110] Starting SD card print (position 0) +[2026-05-03 10:29:30.264] [info] [print_stats.cpp:90] [2110] note_start state printing +[2026-05-03 10:29:30.264] [info] [mmu.cpp:5026] [2110] get_fila_type connect_status 1 fila_type.size 1 channel_color_table.size:1 +[2026-05-03 10:29:30.264] [info] [cavity_fan.cpp:233] [2110] fila_type: PLA +[2026-05-03 10:29:30.264] [info] [cavity_fan.cpp:268] [2110] cur_box_temp: 26.574266446607055 , fila_box_temp: 40 , is_cooling: false +[2026-05-03 10:29:30.264] [info] [idle_timeout.cpp:138] [2110] handle_print_state print_state:printing +[2026-05-03 10:29:30.265] [info] [virtual_sdcard.cpp:905] [2110] Start print calibration +[2026-05-03 10:29:30.265] [info] [bed_mesh.cpp:647] [2110] adaptive_ignore_state 0 +[2026-05-03 10:29:30.267] [info] [gcode.cpp:963] [2110] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=0, BED_MESH_PROFILE=0 +[2026-05-03 10:29:30.267] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = false +[2026-05-03 10:29:30.269] [info] [gcode.cpp:928] [2110] cmd_SET_CONDITION A=BED_MESH_DATEA, B=false, BED_MESH_DATEA=256 +[2026-05-03 10:29:30.269] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = true +[2026-05-03 10:29:30.270] [info] [gcode.cpp:1123] [2110] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 10:29:30.271] [info] [gcode.cpp:963] [2110] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=1, BED_MESH_PROFILE=0 +[2026-05-03 10:29:30.271] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = true +[2026-05-03 10:29:30.272] [info] [gcode.cpp:1123] [2110] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 10:29:30.273] [info] [gcode.cpp:963] [2110] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=0, BED_MESH_PROFILE=0 +[2026-05-03 10:29:30.273] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = false +[2026-05-03 10:29:30.273] [info] [gcode_move.cpp:679] [2110] cmd_SET_GCODE_OFFSET pos:2 base_position[pos]:0 homing_position[pos]:0 bed_roughness_offset:-0.06 z_offset:0 offset:-0.06 +[2026-05-03 10:29:30.274] [info] [gcode_move.cpp:708] [2110] cmd_SET_GCODE_OFFSET : 708___ ok +[2026-05-03 10:29:30.274] [info] [bed_mesh.cpp:2901] [2110] cmd_BED_MESH_PROFILE: from_slicer 0 execute_calirate_from_slicer 0 +[2026-05-03 10:29:30.281] [info] [z_compensation.cpp:285] [2110] ZCompensation z_adjust_mm 0.1038602970588235 +[2026-05-03 10:29:30.290] [info] [bed_mesh.cpp:463] [2110] update_status bed_mesh_exist:0x0100 +[2026-05-03 10:29:30.290] [info] [print_stats.cpp:277] [2110] bed_mesh_exist:0x0100 +[2026-05-03 10:29:30.290] [info] [bed_mesh.cpp:2875] [2110] ProfileManager::load_profile default time 0.015344000000368396 +[2026-05-03 10:29:30.291] [info] [gcode.cpp:1123] [2110] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 10:29:30.292] [info] [gcode.cpp:963] [2110] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=1, BED_MESH_PROFILE=0 +[2026-05-03 10:29:30.292] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = true +[2026-05-03 10:29:30.293] [info] [gcode.cpp:1123] [2110] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 10:29:30.293] [info] [virtual_sdcard.cpp:928] [2110] Print calibration compelte +[2026-05-03 10:29:30.293] [info] [virtual_sdcard.cpp:883] [2110] Start chamber temperature detection, must_pause_work false +[2026-05-03 10:29:30.295] [info] [servo.cpp:272] [2110] CMD_set_cavity_temperature_mode mode:0 +[2026-05-03 10:29:30.295] [info] [servo.cpp:249] [2110] start grille open check. +[2026-05-03 10:29:30.296] [info] [virtual_sdcard.cpp:900] [2110] chamber temperature detection complete. +[2026-05-03 10:29:30.297] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:26.574266446607055 last_speed:0 -> speed:0.1 +[2026-05-03 10:29:30.306] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:29:30.308] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:29:30.309] [info] [extruder.cpp:493] [2110] cmd_M104 temp 140 index -1 wait false +[2026-05-03 10:29:30.309] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:29:30.309] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:29:30.310] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 10:29:30.310] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:140,wait:false +[2026-05-03 10:29:30.310] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:29:30.310] [info] [heater_bed.cpp:57] [2110] cmd_M140 temp 55 wait false +[2026-05-03 10:29:30.310] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 10:29:30.311] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 10:29:30.311] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 10:29:30.311] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:55,wait:false +[2026-05-03 10:29:30.311] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:29:30.312] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"1405"} +[2026-05-03 10:29:30.312] [info] [device_status.cpp:989] [2117] M2202 result_code:1405 +[2026-05-03 10:29:30.312] [info] [heater_bed.cpp:57] [2110] cmd_M140 temp 55 wait true +[2026-05-03 10:29:30.312] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 10:29:30.313] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 10:29:30.313] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 10:29:30.313] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:55,wait:true +[2026-05-03 10:29:30.313] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:29:30.397] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1002,"id":11} +[2026-05-03 10:29:30.398] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 10:29:30.398] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 10:29:30.398] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 10:29:30.400] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:29:30.486] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1045,"params":{"storage_media":"local","file_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode"},"id":12} +[2026-05-03 10:29:30.490] [info] [verify_heater.cpp:164] [2110] Heater extruder approaching new target of 140 +[2026-05-03 10:29:30.490] [info] [verify_heater.cpp:164] [2110] Heater heater_bed approaching new target of 55 +[2026-05-03 10:29:30.494] [info] [api_printer.cpp:2104] [2275] add host task 1045 +[2026-05-03 10:29:30.494] [info] [api_printer.cpp:2058] [2173] process_request1045 +[2026-05-03 10:29:30.500] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:29:30.811] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1002,"id":13} +[2026-05-03 10:29:30.813] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 10:29:30.813] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 10:29:30.813] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 10:29:30.815] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:29:46.158] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=4168.8432997790005,half_rtt=0.00025241649973395397,freq=119998380.7390812 +[2026-05-03 10:29:51.515] [info] [verify_heater.cpp:140] [2110] Heater extruder within range of 140 +[2026-05-03 10:29:57.976] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=4180.660956285,time_avg=4151.11964076541,freq=119998688.67256199,diff=71600.15014648438(0.0005966679178873698),stddev=1574.8154879692972 +[2026-05-03 10:30:00.881] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:30:00.882] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:30:25.740] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1021,"id":15} +[2026-05-03 10:30:25.741] [info] [api_printer.cpp:2058] [2110] process_request1021 +[2026-05-03 10:30:30.929] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:30:30.930] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:30:42.353] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1028,"params":{"heater_bed":90},"id":17} +[2026-05-03 10:30:42.355] [info] [api_printer.cpp:2058] [2110] process_request1028 +[2026-05-03 10:30:42.355] [info] [api_printer.cpp:1008] [2110] handle_set_temperature heater_bed: M140 S90 +[2026-05-03 10:30:42.356] [info] [heater_bed.cpp:57] [2110] cmd_M140 temp 90 wait false +[2026-05-03 10:30:42.356] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 10:30:42.356] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 10:30:42.356] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 10:30:42.356] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:90,wait:false +[2026-05-03 10:30:42.356] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:30:42.357] [info] [mqtt_connector.cpp:486] [2110] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:30:49.144] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1028,"params":{"heater_bed":90},"id":18} +[2026-05-03 10:30:49.145] [info] [api_printer.cpp:2058] [2110] process_request1028 +[2026-05-03 10:30:49.146] [info] [api_printer.cpp:1008] [2110] handle_set_temperature heater_bed: M140 S90 +[2026-05-03 10:30:49.147] [info] [heater_bed.cpp:57] [2110] cmd_M140 temp 90 wait false +[2026-05-03 10:30:49.148] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 10:30:49.148] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 10:30:49.148] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 10:30:49.148] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:90,wait:false +[2026-05-03 10:30:49.148] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:30:49.149] [info] [mqtt_connector.cpp:486] [2110] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:31:03.935] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:31:10.604] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:4207.480663597571,last_temp:141.27810143915127,temp:141.27810143915127,target_temp:140,smoothed_temp:140.91197111405117 +[2026-05-03 10:31:14.763] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:31:19.241] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:31:19.242] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:31:19.901] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:4216.77800000038,last_temp:54.08968161137068,temp:54.08968161137068,target_temp:90,smoothed_temp:53.9620782218886 +[2026-05-03 10:31:49.308] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:31:49.309] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:31:52.177] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=4294.862598713999,time_avg=4265.307157325568,freq=119998665.91215934,diff=65956.47283935547(0.0005496372736612956),stddev=2234.626091168494 +[2026-05-03 10:32:13.580] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1028,"params":{"heater_bed":55},"id":21} +[2026-05-03 10:32:13.582] [info] [api_printer.cpp:2058] [2110] process_request1028 +[2026-05-03 10:32:13.582] [info] [api_printer.cpp:1008] [2110] handle_set_temperature heater_bed: M140 S55 +[2026-05-03 10:32:13.583] [info] [heater_bed.cpp:57] [2110] cmd_M140 temp 55 wait false +[2026-05-03 10:32:13.583] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 10:32:13.583] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 10:32:13.583] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 10:32:13.583] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:55,wait:false +[2026-05-03 10:32:13.583] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:32:13.584] [info] [mqtt_connector.cpp:486] [2110] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:32:13.690] [info] [verify_heater.cpp:140] [2110] Heater heater_bed within range of 55 +[2026-05-03 10:32:17.884] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1021,"id":22} +[2026-05-03 10:32:17.885] [info] [api_printer.cpp:2058] [2110] process_request1021 +[2026-05-03 10:32:33.761] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1022,"id":23} +[2026-05-03 10:32:33.763] [info] [api_printer.cpp:2058] [2110] process_request1022 +[2026-05-03 10:32:33.763] [info] [heaters.cpp:905] [2110] print_stop true +[2026-05-03 10:32:34.428] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-03 10:32:34.428] [info] [device_status.cpp:989] [2117] M2202 result_code:1066 +[2026-05-03 10:32:34.431] [info] [heaters.cpp:1236] [2110] wait_for_temperature is_wait_for_temperature false print_stop true target_temp 55 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 10:32:34.432] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"2501"} +[2026-05-03 10:32:34.432] [info] [device_status.cpp:989] [2117] M2202 result_code:2501 +[2026-05-03 10:32:34.433] [info] [pause_resume.cpp:273] [2110] send_pause_command +[2026-05-03 10:32:34.434] [info] [virtual_sdcard.cpp:966] [2110] do_pause +[2026-05-03 10:32:34.434] [info] [pause_resume.cpp:276] [2110] send_pause_command over +[2026-05-03 10:32:34.435] [info] [gcode_move.cpp:738] [2110] cmd_SAVE_GCODE_STATE : 738___ ok +[2026-05-03 10:32:34.437] [info] [pause_resume.cpp:242] [2110] __func__:save_state #1 state_name:PAUSE_STATE_1 fan_speed:0 box_fan_speed:0.1 0 +[2026-05-03 10:32:34.438] [info] [z_compensation.cpp:285] [2110] ZCompensation z_adjust_mm 0.0006137813469304643 +[2026-05-03 10:32:34.443] [info] [mcu.cpp:712] [2110] set_digital pin PB7 4291.568493 4337.130475526 +[2026-05-03 10:32:34.532] [info] [virtual_sdcard.cpp:1709] [2110] Exiting SD card print (position 7205) +[2026-05-03 10:32:34.532] [info] [print_stats.cpp:109] [2110] note_pause state paused +[2026-05-03 10:32:34.532] [info] [idle_timeout.cpp:138] [2110] handle_print_state print_state:paused +[2026-05-03 10:32:34.611] [error] [tmc.cpp:359] [2110] TMC extruder reports GSTAT: 10000000 reset=1(Reset) +[2026-05-03 10:32:35.354] [info] [gcode_move.cpp:738] [2110] cmd_SAVE_GCODE_STATE : 738___ ok +[2026-05-03 10:32:35.355] [info] [pause_resume.cpp:242] [2110] __func__:save_state #1 state_name:PAUSE_STATE_2 fan_speed:0 box_fan_speed:0.1 0 +[2026-05-03 10:32:35.355] [info] [pause_resume.cpp:319] [2110] cmd_PAUSE is_goto_waste_box:1 +[2026-05-03 10:32:35.356] [info] [gcode_move.cpp:52] [2110] G180 select 800 +[2026-05-03 10:32:35.357] [info] [gcode.cpp:1006] [2110] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=140.59937071733734 +[2026-05-03 10:32:35.357] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = true +[2026-05-03 10:32:35.357] [info] [gcode.cpp:1123] [2110] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 10:32:36.172] [info] [gcode_move.cpp:738] [2110] cmd_SAVE_GCODE_STATE : 738___ ok +[2026-05-03 10:32:36.173] [info] [pause_resume.cpp:242] [2110] __func__:save_state #1 state_name:PAUSE_STATE_3 fan_speed:0 box_fan_speed:0.1 0 +[2026-05-03 10:32:36.174] [info] [gcode_move.cpp:647] [2110] cmd_M220 speed 50.49999999999999 speed_factor 0.016833333333333332 101 +[2026-05-03 10:32:36.175] [info] [gcode_move.cpp:52] [2110] G180 select 0 +[2026-05-03 10:32:36.175] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"2502"} +[2026-05-03 10:32:36.175] [info] [device_status.cpp:989] [2117] M2202 result_code:2502 +[2026-05-03 10:32:36.176] [info] [mqtt_connector.cpp:486] [2110] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:32:36.176] [info] [device_status.cpp:1165] [2117] Stop AI spaghetti detection +[2026-05-03 10:32:36.176] [info] [uds_aicamera_client.cpp:617] [2117] stop_ai_spaghetti_detection called +[2026-05-03 10:32:36.177] [info] [uds_aicamera_client.cpp:374] [2117] Sending UDS request: {"id":5,"method":"ai_detection","params":{"operate":"wire_pause"}} +[2026-05-03 10:32:36.177] [info] [device_status.cpp:1191] [2117] Stop AI foreign object detection +[2026-05-03 10:32:36.181] [info] [uds_aicamera_client.cpp:41] [2178] Received UDS message: {"id":5,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 10:32:36.181] [info] [gcode.cpp:598] [2110] Print already paused or state is not printing +[2026-05-03 10:32:36.182] [info] [uds_aicamera_client.cpp:215] [2178] Received UDS message: {"id":5,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 10:32:36.182] [error] [uds_aicamera_client.cpp:217] [2178] Parsing UDS message without 'result': {"id":5,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 10:32:36.183] [info] [mqtt_connector.cpp:486] [2110] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:32:36.185] [info] [virtual_sdcard.cpp:993] [2110] do_cancel +[2026-05-03 10:32:36.186] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"2503"} +[2026-05-03 10:32:36.186] [info] [device_status.cpp:989] [2117] M2202 result_code:2503 +[2026-05-03 10:32:36.186] [info] [print_stats.cpp:288] [2110] note_finish state cancelled error_message +[2026-05-03 10:32:36.187] [info] [mmu.cpp:4963] [2110] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 10:32:36.187] [info] [mmu.cpp:4958] [2110] clear_abnormal_feedback #1 __OVER +[2026-05-03 10:32:36.189] [info] [idle_timeout.cpp:138] [2110] handle_print_state print_state:cancelled +[2026-05-03 10:32:36.192] [info] [pause_resume.cpp:715] [2110] __func__:cmd_CANCEL_PRINT #1 Z_pos:10.000613643846929 +[2026-05-03 10:32:36.194] [info] [heaters.cpp:912] [2110] print_stop false +[2026-05-03 10:32:37.138] [info] [device_status.cpp:1165] [2169] Stop AI spaghetti detection +[2026-05-03 10:32:37.138] [info] [uds_aicamera_client.cpp:617] [2169] stop_ai_spaghetti_detection called +[2026-05-03 10:32:37.139] [info] [uds_aicamera_client.cpp:374] [2169] Sending UDS request: {"id":6,"method":"ai_detection","params":{"operate":"wire_pause"}} +[2026-05-03 10:32:37.140] [info] [device_ui_message_handle.cpp:374] [2169] report_error: {"id":0,"report":{"error_code":1301,"error_level":3,"message":"ai spaghetti detection error"}} +[2026-05-03 10:32:37.141] [info] [uds_aicamera_client.cpp:41] [2178] Received UDS message: {"id":6,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 10:32:37.142] [info] [uds_aicamera_client.cpp:215] [2178] Received UDS message: {"id":6,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 10:32:37.142] [error] [uds_aicamera_client.cpp:217] [2178] Parsing UDS message without 'result': {"id":6,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 10:32:37.143] [info] [device_status.cpp:1191] [2169] Stop AI foreign object detection +[2026-05-03 10:32:37.144] [info] [device_ui_message_handle.cpp:779] [2169] Reporting history task: {"id":0,"method":"report_history_task","result":{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2}} +[2026-05-03 10:32:37.144] [info] [record_manager.cpp:420] [2169] Adding history task to record: id e716074c-b905-4712-a70b-aa010299b5f5 name ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode status 2 +[2026-05-03 10:32:37.145] [info] [sql_database.cpp:97] [2169] Insert SQL: INSERT INTO task_record (task_id, task_name, begin_time, end_time, task_status, time_lapse_video_status, time_lapse_video_url, time_lapse_video_size, time_lapse_video_duration, upload_flag, file_create_time) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 10:32:37.165] [info] [device_status.cpp:886] [2169] ready_post_change_message {"machine_status":{"progress":0},"print_status":{"current_layer":0,"filename":"","print_duration":0,"remaining_time_sec":0,"total_duration":0,"uuid":""}} +[2026-05-03 10:32:37.166] [info] [device_status.cpp:1674] [2169] Device status change to: 1, last status: 2 +[2026-05-03 10:32:37.196] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1031,"params":{"mode":1},"id":24} +[2026-05-03 10:32:37.198] [info] [api_printer.cpp:2058] [2110] process_request1031 +[2026-05-03 10:32:37.199] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1002,"id":25} +[2026-05-03 10:32:37.199] [info] [mqtt_connector.cpp:486] [2110] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:32:37.199] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 10:32:37.200] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 10:32:37.200] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 10:32:37.202] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:32:38.173] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1044,"params":{"storage_media":"u-disk","dir":"/","offset":0,"limit":20},"id":26} +[2026-05-03 10:32:38.174] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 10:32:38.175] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 10:32:38.176] [error] [device_status.cpp:1366] [2173] U-disk is not mounted +[2026-05-03 10:32:38.176] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:32:39.316] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1045,"params":{"storage_media":"local","file_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode"},"id":27} +[2026-05-03 10:32:39.317] [info] [api_printer.cpp:2104] [2275] add host task 1045 +[2026-05-03 10:32:39.318] [info] [api_printer.cpp:2058] [2173] process_request1045 +[2026-05-03 10:32:39.320] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:32:39.472] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1046,"params":{"storage_media":"local","filename":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode"},"id":28} +[2026-05-03 10:32:39.473] [info] [api_printer.cpp:2104] [2275] add host task 1046 +[2026-05-03 10:32:39.474] [info] [api_printer.cpp:2058] [2173] process_request1046 +[2026-05-03 10:32:39.474] [info] [device_status.cpp:1347] [2173] color map size: 1 +[2026-05-03 10:32:39.474] [info] [device_status.cpp:1353] [2173] jcolor {"color":"#26A69A","name":"PLA","t":0} +[2026-05-03 10:32:39.474] [info] [device_status.cpp:1359] [2173] get local file: {"color_map":[{"color":"#26A69A","name":"PLA","t":0}],"create_time":1777775338,"filename":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","last_print_time":0,"layer":42,"print_time":10743,"size":3643591,"total_filament_used":36.45,"total_print_times":0} +[2026-05-03 10:32:39.475] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:32:40.045] [info] [gcode_move.cpp:52] [2110] G180 select 800 +[2026-05-03 10:32:40.046] [info] [gcode.cpp:1006] [2110] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=140.9448783275073 +[2026-05-03 10:32:40.046] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = true +[2026-05-03 10:32:40.047] [info] [gcode.cpp:1123] [2110] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 10:32:40.861] [info] [extruder.cpp:493] [2110] cmd_M104 temp 0 index -1 wait false +[2026-05-03 10:32:40.862] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:0,wait:false +[2026-05-03 10:32:40.862] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:32:40.862] [info] [heater_bed.cpp:57] [2110] cmd_M140 temp 0 wait false +[2026-05-03 10:32:40.862] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:0,wait:false +[2026-05-03 10:32:40.862] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:32:41.165] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:32:41.166] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:32:41.177] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1036,"id":29} +[2026-05-03 10:32:41.178] [info] [api_printer.cpp:2104] [2275] add host task 1036 +[2026-05-03 10:32:41.178] [info] [api_printer.cpp:2058] [2173] process_request1036 +[2026-05-03 10:32:41.179] [info] [device_status.cpp:449] [2173] get history tasks +[2026-05-03 10:32:41.179] [info] [device_status.cpp:458] [2173] Total tasks: 2 +[2026-05-03 10:32:41.180] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:32:41.471] [info] [gcode.cpp:928] [2110] cmd_SET_CONDITION A=BED_MESH_DATEA, B=true, BED_MESH_DATEA=256 +[2026-05-03 10:32:41.472] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = false +[2026-05-03 10:32:41.472] [info] [bed_mesh.cpp:2901] [2110] cmd_BED_MESH_PROFILE: from_slicer 0 execute_calirate_from_slicer 0 +[2026-05-03 10:32:41.487] [info] [bed_mesh.cpp:463] [2110] update_status bed_mesh_exist:0x0100 +[2026-05-03 10:32:41.487] [info] [print_stats.cpp:277] [2110] bed_mesh_exist:0x0100 +[2026-05-03 10:32:41.487] [info] [bed_mesh.cpp:2875] [2110] ProfileManager::load_profile default time 0.014915583000401966 +[2026-05-03 10:32:41.489] [info] [mcu.cpp:712] [2110] set_digital pin PB7 4298.7154575 4344.175949946 +[2026-05-03 10:32:41.489] [info] [mcu.cpp:712] [2110] set_digital pin PF6 4298.7154575 4344.176809362 +[2026-05-03 10:32:41.490] [info] [mcu.cpp:712] [2110] set_digital pin PE15 4298.7154575 4344.177426904 +[2026-05-03 10:32:41.491] [info] [mcu.cpp:712] [2110] set_digital pin PE12 4298.7154575 4344.178184612 +[2026-05-03 10:32:41.492] [info] [gcode.cpp:1123] [2110] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 10:32:41.494] [info] [gcode.cpp:945] [2110] cmd_SET_CONDITION A=BED_MESH_DATEB, B=true, BED_MESH_DATEB=256 +[2026-05-03 10:32:41.494] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = true +[2026-05-03 10:32:41.494] [info] [gcode.cpp:1123] [2110] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 10:32:41.495] [info] [pause_resume.cpp:680] [2110] __func__:cmd_CLEAR_PAUSE #1 is_paused:false +[2026-05-03 10:32:41.495] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"2504"} +[2026-05-03 10:32:41.495] [info] [device_status.cpp:989] [2117] M2202 result_code:2504 +[2026-05-03 10:32:41.495] [info] [device_status.cpp:991] [2117] Print stopped, ignore sub status update +[2026-05-03 10:32:41.497] [info] [mqtt_connector.cpp:486] [2110] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:32:42.012] [info] [gcode_move.cpp:647] [2110] cmd_M220 speed 50 speed_factor 0.016666666666666666 100 +[2026-05-03 10:32:42.013] [info] [webhooks.cpp:170] [2110] return total: {"id":42,"result":{}} +[2026-05-03 10:32:42.014] [info] [gcode.cpp:838] [2110] cmd_M117 set printer mode: 1 +[2026-05-03 10:32:42.014] [info] [webhooks.cpp:170] [2110] return total: {"id":43,"result":{}} +[2026-05-03 10:32:44.827] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1020,"params":{"filename":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","storage_media":"local","config":{"delay_video":false,"printer_check":false,"print_layout":"A","bedlevel_force":false,"slot_map":[{"t":0,"canvas_id":0,"tray_id":0}]}},"id":30} +[2026-05-03 10:32:44.831] [info] [api_printer.cpp:2058] [2110] process_request1020 +[2026-05-03 10:32:44.831] [info] [record_manager.cpp:827] [2110] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:32:44.832] [info] [device_ui_message_handle.cpp:339] [2110] sync report: {"id":0,"method":"report_device_status","result":{"delay_video":0}} +[2026-05-03 10:32:44.833] [info] [api_printer.cpp:1583] [2110] bed_mesh_detected value ---: 256 +[2026-05-03 10:32:44.833] [info] [api_printer.cpp:769] [2110] exist bed mesh data for print layout: A +[2026-05-03 10:32:44.833] [info] [api_printer.cpp:1594] [2110] auto_level_force file_name : /opt/usr/gcode/local//ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:32:44.834] [info] [api_printer.cpp:1609] [2110] BED_MESH_CALIBRATE slice_cfg_model_found : true +[2026-05-03 10:32:44.835] [info] [bed_mesh.cpp:638] [2110] execute_calirate_from_slicer 0 +[2026-05-03 10:32:44.835] [info] [api_printer.cpp:2201] [2110] set print color map: CANVAS_SET_COLOR_TABLE T=0 ID=0 CHANNEL=0 +[2026-05-03 10:32:44.836] [info] [mmu.cpp:4462] [2110] Configure channel mapping +[2026-05-03 10:32:44.836] [info] [mmu.cpp:4493] [2110] CMD_canvas_set_color_table #1 T_vec.size 1 table_T 0 table_color 0xFF3700 table_channel 0 +[2026-05-03 10:32:44.837] [info] [mqtt_connector.cpp:486] [2110] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:32:44.840] [info] [api_printer.cpp:2058] [2110] process_request11020 +[2026-05-03 10:32:44.840] [info] [api_printer.cpp:1594] [2110] auto_level_force file_name : /opt/usr/gcode/local//ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:32:44.841] [info] [api_printer.cpp:1609] [2110] BED_MESH_CALIBRATE slice_cfg_model_found : true +[2026-05-03 10:32:44.841] [info] [api_printer.cpp:861] [2110] handle_start_print: SDCARD_PRINT_FILE FILENAME=local/"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode" SLICE_CFG_MODEL=1 +[2026-05-03 10:32:44.842] [info] [virtual_sdcard.cpp:1080] [2110] cmd_SDCARD_PRINT_FILE slice_cfg_model:true auto_det:false filename:local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 10:32:44.842] [info] [virtual_sdcard.cpp:1027] [2110] _reset_file +[2026-05-03 10:32:44.843] [info] [virtual_sdcard.cpp:966] [2110] do_pause +[2026-05-03 10:32:44.843] [info] [idle_timeout.cpp:138] [2110] handle_print_state print_state:standby +[2026-05-03 10:32:44.843] [info] [virtual_sdcard.cpp:1454] [2110] VirtualSD File opened: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode, Size:3643591 +[2026-05-03 10:32:44.844] [info] [idle_timeout.cpp:138] [2110] handle_print_state print_state:standby +[2026-05-03 10:32:44.844] [info] [device_status.cpp:1669] [2110] Start Printing, clear filename +[2026-05-03 10:32:44.844] [info] [device_status.cpp:1674] [2110] Device status change to: 2, last status: 1 +[2026-05-03 10:32:44.845] [info] [device_status.cpp:2023] [2110] Add print task: id: a065d20a-a124-4f32-afca-a3dfb699ae8c, name: ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode, printer_time: 10743, time lapse: 0 +[2026-05-03 10:32:44.846] [info] [virtual_sdcard.cpp:979] [2110] do_resume +[2026-05-03 10:32:44.846] [info] [virtual_sdcard.cpp:1545] [2110] Starting SD card print (position 0) +[2026-05-03 10:32:44.846] [info] [print_stats.cpp:90] [2110] note_start state printing +[2026-05-03 10:32:44.846] [info] [mmu.cpp:5026] [2110] get_fila_type connect_status 1 fila_type.size 1 channel_color_table.size:1 +[2026-05-03 10:32:44.846] [info] [cavity_fan.cpp:233] [2110] fila_type: PLA +[2026-05-03 10:32:44.847] [info] [cavity_fan.cpp:268] [2110] cur_box_temp: 26.473879046470643 , fila_box_temp: 40 , is_cooling: false +[2026-05-03 10:32:44.847] [info] [idle_timeout.cpp:138] [2110] handle_print_state print_state:printing +[2026-05-03 10:32:44.847] [info] [virtual_sdcard.cpp:905] [2110] Start print calibration +[2026-05-03 10:32:44.848] [info] [bed_mesh.cpp:647] [2110] adaptive_ignore_state 0 +[2026-05-03 10:32:44.849] [info] [gcode.cpp:963] [2110] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=0, BED_MESH_PROFILE=0 +[2026-05-03 10:32:44.849] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = false +[2026-05-03 10:32:44.851] [info] [gcode.cpp:928] [2110] cmd_SET_CONDITION A=BED_MESH_DATEA, B=false, BED_MESH_DATEA=256 +[2026-05-03 10:32:44.851] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = true +[2026-05-03 10:32:44.852] [info] [gcode.cpp:1123] [2110] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 10:32:44.853] [info] [gcode.cpp:963] [2110] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=1, BED_MESH_PROFILE=0 +[2026-05-03 10:32:44.853] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = true +[2026-05-03 10:32:44.854] [info] [gcode.cpp:1123] [2110] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 10:32:44.855] [info] [gcode.cpp:963] [2110] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=0, BED_MESH_PROFILE=0 +[2026-05-03 10:32:44.855] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = false +[2026-05-03 10:32:44.856] [info] [gcode_move.cpp:679] [2110] cmd_SET_GCODE_OFFSET pos:2 base_position[pos]:-0.06 homing_position[pos]:-0.06 bed_roughness_offset:-0.06 z_offset:0 offset:-0.06 +[2026-05-03 10:32:44.856] [info] [gcode_move.cpp:708] [2110] cmd_SET_GCODE_OFFSET : 708___ ok +[2026-05-03 10:32:44.856] [info] [bed_mesh.cpp:2901] [2110] cmd_BED_MESH_PROFILE: from_slicer 0 execute_calirate_from_slicer 0 +[2026-05-03 10:32:44.872] [info] [bed_mesh.cpp:463] [2110] update_status bed_mesh_exist:0x0100 +[2026-05-03 10:32:44.872] [info] [print_stats.cpp:277] [2110] bed_mesh_exist:0x0100 +[2026-05-03 10:32:44.872] [info] [bed_mesh.cpp:2875] [2110] ProfileManager::load_profile default time 0.015583624999635504 +[2026-05-03 10:32:44.875] [info] [gcode.cpp:1123] [2110] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 10:32:44.876] [info] [gcode.cpp:963] [2110] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=1, BED_MESH_PROFILE=0 +[2026-05-03 10:32:44.876] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = true +[2026-05-03 10:32:44.878] [info] [gcode.cpp:1123] [2110] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 10:32:44.878] [info] [virtual_sdcard.cpp:928] [2110] Print calibration compelte +[2026-05-03 10:32:44.878] [info] [virtual_sdcard.cpp:883] [2110] Start chamber temperature detection, must_pause_work false +[2026-05-03 10:32:44.879] [info] [servo.cpp:272] [2110] CMD_set_cavity_temperature_mode mode:0 +[2026-05-03 10:32:44.880] [info] [servo.cpp:249] [2110] start grille open check. +[2026-05-03 10:32:44.880] [info] [virtual_sdcard.cpp:900] [2110] chamber temperature detection complete. +[2026-05-03 10:32:44.881] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:26.473879046470643 last_speed:0 -> speed:0.1 +[2026-05-03 10:32:44.890] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:32:44.891] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:32:44.892] [info] [extruder.cpp:493] [2110] cmd_M104 temp 140 index -1 wait false +[2026-05-03 10:32:44.892] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:32:44.892] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:32:44.892] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 10:32:44.892] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:140,wait:false +[2026-05-03 10:32:44.892] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:32:44.893] [info] [heater_bed.cpp:57] [2110] cmd_M140 temp 55 wait false +[2026-05-03 10:32:44.893] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 10:32:44.893] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 10:32:44.893] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 10:32:44.893] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:55,wait:false +[2026-05-03 10:32:44.894] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:32:44.894] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"1405"} +[2026-05-03 10:32:44.895] [info] [device_status.cpp:989] [2117] M2202 result_code:1405 +[2026-05-03 10:32:44.896] [info] [heater_bed.cpp:57] [2110] cmd_M140 temp 55 wait true +[2026-05-03 10:32:44.896] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 10:32:44.896] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 10:32:44.896] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 10:32:44.897] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:55,wait:true +[2026-05-03 10:32:44.897] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:32:44.904] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1002,"id":31} +[2026-05-03 10:32:44.905] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 10:32:44.906] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 10:32:44.906] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 10:32:44.908] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:32:44.963] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1045,"params":{"storage_media":"local","file_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode"},"id":32} +[2026-05-03 10:32:44.965] [info] [api_printer.cpp:2104] [2275] add host task 1045 +[2026-05-03 10:32:44.965] [info] [api_printer.cpp:2058] [2173] process_request1045 +[2026-05-03 10:32:44.967] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:32:45.397] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"method":1002,"id":33} +[2026-05-03 10:32:45.398] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 10:32:45.399] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 10:32:45.399] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 10:32:45.402] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:32:50.265] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:32:52.242] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=4354.927270784,time_avg=4325.386259681996,freq=119998405.16215184,diff=72590.29290771484(0.0006049191075642904),stddev=2887.6603569354093 +[2026-05-03 10:32:55.194] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=4357.879613744,time_avg=4327.420143295972,freq=119998398.39271975,diff=85771.61779785156(0.0007147634816487631),stddev=2886.200431770732 +[2026-05-03 10:33:10.606] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:4327.482274252645,last_temp:140.6718894236513,temp:140.6718894236513,target_temp:140,smoothed_temp:140.8556916788644 +[2026-05-03 10:33:15.459] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:33:15.460] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:33:20.401] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:4337.27800000038,last_temp:62.30899313449919,temp:62.30899313449919,target_temp:55,smoothed_temp:62.33359794773472 +[2026-05-03 10:33:45.508] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:33:45.509] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:33:46.386] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:34:12.946] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-03 10:34:12.946] [info] [device_status.cpp:989] [2117] M2202 result_code:1066 +[2026-05-03 10:34:12.946] [info] [heaters.cpp:1236] [2110] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 55 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 10:34:12.947] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:34:12.948] [info] [bed_mesh.cpp:1001] [2110] cmd_BED_MESH_CALIBRATE: from_slicer 1 execute_calirate_from_slicer 0 adaptive_ignore_state 0 +[2026-05-03 10:34:12.950] [info] [homing_override.cpp:238] [2110] need false false false homed false false false +[2026-05-03 10:34:12.951] [info] [homing_override.cpp:261] [2110] cmd_G28 cur_temp:140.63922191718942,safe_home_temp:140 +[2026-05-03 10:34:12.951] [info] [extruder.cpp:493] [2110] cmd_M104 temp 140 index -1 wait false +[2026-05-03 10:34:12.951] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:34:12.951] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:34:12.952] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 10:34:12.952] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:140,wait:false +[2026-05-03 10:34:12.952] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:34:12.952] [info] [homing_override.cpp:166] [2110] homing_ready axis z +[2026-05-03 10:34:12.952] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"2801"} +[2026-05-03 10:34:12.954] [info] [device_status.cpp:989] [2117] M2202 result_code:2801 +[2026-05-03 10:34:13.205] [info] [homing_override.cpp:175] [2110] homing_ready #2: endstop name z state false +[2026-05-03 10:34:13.487] [info] [gcode.cpp:598] [2110] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 10:34:13.760] [info] [gcode.cpp:598] [2110] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 10:34:13.762] [info] [gcode_move.cpp:638] [2110] cmd_M114 X:52.500 Y:264.000 Z:80.000 E:-1.000 +[2026-05-03 10:34:13.763] [info] [stepper.cpp:573] [2110] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 10:34:13.794] [info] [homing.cpp:152] [2110] kin_spos name stepper_x command_position 649.75 +[2026-05-03 10:34:13.794] [info] [homing.cpp:152] [2110] kin_spos name stepper_y command_position 121.75 +[2026-05-03 10:34:13.794] [info] [homing.cpp:152] [2110] kin_spos name stepper_z command_position 79.97322464384692 +[2026-05-03 10:34:13.898] [info] [mcu.cpp:712] [2110] set_digital pin PF6 4390.944047541668 4436.585326073 +[2026-05-03 10:34:13.899] [info] [mcu.cpp:712] [2110] set_digital pin PE15 4390.944047541668 4436.586438115 +[2026-05-03 10:34:14.155] [info] [mcu.cpp:390] [2162] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 10:34:14.178] [warning] [tmc.cpp:887] [2110] Stepper stepper_y phase change (was -21 now 43) +[2026-05-03 10:34:14.181] [info] [mcu.cpp:634] [2110] home_wait pin_value:1 next_clock:105384729911 +[2026-05-03 10:34:14.182] [info] [homing.cpp:266] [2110] endstop_name x tt 4391.030205291667 trigger_time 4391.030205291667 move_end_print_time 4391.28404754167 +[2026-05-03 10:34:14.182] [info] [homing.cpp:266] [2110] endstop_name x tt 4391.030205291667 trigger_time 4391.030205291667 move_end_print_time 4391.28404754167 +[2026-05-03 10:34:14.182] [info] [homing.cpp:309] [2110] stepper_name stepper_x over_steps 0 halt_pos -213 start_pos 130 trig_pos -213 +[2026-05-03 10:34:14.182] [info] [homing.cpp:309] [2110] stepper_name stepper_y over_steps 0 halt_pos -1306 start_pos -963 trig_pos -1306 +[2026-05-03 10:34:14.213] [info] [stepper.cpp:573] [2110] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 10:34:14.820] [info] [gcode_move.cpp:638] [2110] cmd_M114 X:8.000 Y:264.000 Z:80.072 E:-1.000 +[2026-05-03 10:34:14.821] [info] [gcode_move.cpp:638] [2110] cmd_M114 X:8.000 Y:264.000 Z:80.072 E:-1.000 +[2026-05-03 10:34:14.822] [info] [stepper.cpp:573] [2110] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 10:34:14.865] [info] [homing.cpp:152] [2110] kin_spos name stepper_x command_position 414 +[2026-05-03 10:34:14.865] [info] [homing.cpp:152] [2110] kin_spos name stepper_y command_position -398 +[2026-05-03 10:34:14.865] [info] [homing.cpp:152] [2110] kin_spos name stepper_z command_position 79.97322464384692 +[2026-05-03 10:34:15.562] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:34:15.562] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:34:19.574] [info] [mcu.cpp:390] [2162] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 10:34:19.585] [warning] [tmc.cpp:887] [2110] Stepper stepper_y phase change (was 43 now -21) +[2026-05-03 10:34:19.598] [info] [mcu.cpp:634] [2110] home_wait pin_value:1 next_clock:105514808616 +[2026-05-03 10:34:19.599] [info] [homing.cpp:266] [2110] endstop_name y tt 4396.450151333333 trigger_time 4396.450151333333 move_end_print_time 4396.704777708352 +[2026-05-03 10:34:19.599] [info] [homing.cpp:266] [2110] endstop_name y tt 4396.450151333333 trigger_time 4396.450151333333 move_end_print_time 4396.704777708352 +[2026-05-03 10:34:19.599] [info] [homing.cpp:309] [2110] stepper_name stepper_y over_steps 0 halt_pos 20783 start_pos -503 trig_pos 20783 +[2026-05-03 10:34:19.599] [info] [homing.cpp:309] [2110] stepper_name stepper_x over_steps 0 halt_pos -20696 start_pos 590 trig_pos -20696 +[2026-05-03 10:34:19.630] [info] [stepper.cpp:573] [2110] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 10:34:20.238] [info] [gcode_move.cpp:638] [2110] cmd_M114 X:8.000 Y:8.000 Z:79.910 E:-1.000 +[2026-05-03 10:34:20.240] [info] [gcode_move.cpp:638] [2110] cmd_M114 X:8.000 Y:8.000 Z:79.910 E:-1.000 +[2026-05-03 10:34:20.241] [info] [stepper.cpp:573] [2110] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 10:34:20.277] [info] [homing.cpp:152] [2110] kin_spos name stepper_x command_position 393.75 +[2026-05-03 10:34:20.278] [info] [homing.cpp:152] [2110] kin_spos name stepper_y command_position 377.75 +[2026-05-03 10:34:20.278] [info] [homing.cpp:152] [2110] kin_spos name stepper_z command_position 79.97322464384692 +[2026-05-03 10:34:21.570] [info] [mcu.cpp:390] [2162] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 10:34:21.593] [info] [mcu.cpp:634] [2110] home_wait pin_value:1 next_clock:105562717833 +[2026-05-03 10:34:21.593] [info] [homing.cpp:266] [2110] endstop_name x tt 4398.446368666667 trigger_time 4398.446368666667 move_end_print_time 4398.698581166666 +[2026-05-03 10:34:21.594] [info] [homing.cpp:266] [2110] endstop_name x tt 4398.446368666667 trigger_time 4398.446368666667 move_end_print_time 4398.698581166666 +[2026-05-03 10:34:21.594] [info] [homing.cpp:309] [2110] stepper_name stepper_x over_steps 0 halt_pos -24725 start_pos -19893 trig_pos -24725 +[2026-05-03 10:34:21.594] [info] [homing.cpp:309] [2110] stepper_name stepper_y over_steps 0 halt_pos 15148 start_pos 19980 trig_pos 15148 +[2026-05-03 10:34:21.624] [info] [stepper.cpp:573] [2110] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 10:34:22.230] [info] [gcode_move.cpp:638] [2110] cmd_M114 X:8.000 Y:8.000 Z:79.910 E:-1.000 +[2026-05-03 10:34:22.232] [info] [gcode_move.cpp:638] [2110] cmd_M114 X:8.000 Y:8.000 Z:79.910 E:-1.000 +[2026-05-03 10:34:22.233] [info] [stepper.cpp:573] [2110] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 10:34:22.264] [info] [homing.cpp:152] [2110] kin_spos name stepper_x command_position 414 +[2026-05-03 10:34:22.264] [info] [homing.cpp:152] [2110] kin_spos name stepper_y command_position -398 +[2026-05-03 10:34:22.264] [info] [homing.cpp:152] [2110] kin_spos name stepper_z command_position 79.97322464384692 +[2026-05-03 10:34:22.718] [info] [mcu.cpp:390] [2162] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 10:34:22.739] [info] [mcu.cpp:634] [2110] home_wait pin_value:1 next_clock:105590283759 +[2026-05-03 10:34:22.740] [info] [homing.cpp:266] [2110] endstop_name y tt 4399.594948958334 trigger_time 4399.594948958334 move_end_print_time 4399.853926666669 +[2026-05-03 10:34:22.741] [info] [homing.cpp:266] [2110] endstop_name y tt 4399.594948958334 trigger_time 4399.594948958334 move_end_print_time 4399.853926666669 +[2026-05-03 10:34:22.741] [info] [homing.cpp:309] [2110] stepper_name stepper_y over_steps 1 halt_pos 16751 start_pos 15951 trig_pos 16750 +[2026-05-03 10:34:22.741] [info] [homing.cpp:309] [2110] stepper_name stepper_x over_steps -1 halt_pos -24722 start_pos -23922 trig_pos -24721 +[2026-05-03 10:34:22.777] [info] [stepper.cpp:573] [2110] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 10:34:22.778] [info] [gcode_move.cpp:638] [2110] cmd_M114 X:8.000 Y:7.988 Z:79.910 E:-1.000 +[2026-05-03 10:34:23.375] [info] [gcode.cpp:598] [2110] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 10:34:23.650] [info] [gcode.cpp:598] [2110] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 10:34:23.652] [info] [homing_override.cpp:399] [2110] manual_move z start +[2026-05-03 10:34:23.653] [info] [homing_override.cpp:401] [2110] manual_move z over +[2026-05-03 10:34:23.653] [info] [homing_override.cpp:422] [2110] prev_G28 z start +[2026-05-03 10:34:23.693] [info] [homing.cpp:152] [2110] kin_spos name stepper_x command_position 316.5 +[2026-05-03 10:34:23.693] [info] [homing.cpp:152] [2110] kin_spos name stepper_y command_position -211.5 +[2026-05-03 10:34:23.693] [info] [homing.cpp:152] [2110] kin_spos name stepper_z command_position 383.714709 +[2026-05-03 10:34:25.259] [info] [mcu.cpp:712] [2110] set_digital pin PE12 4402.305556964837 4447.946780287 +[2026-05-03 10:34:32.794] [info] [mcu.cpp:390] [2162] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 10:34:32.808] [info] [mcu.cpp:634] [2110] home_wait pin_value:1 next_clock:105832105367 +[2026-05-03 10:34:32.808] [info] [homing.cpp:266] [2110] endstop_name z tt 4409.670806958334 trigger_time 4409.670806958334 move_end_print_time 4409.922997458333 +[2026-05-03 10:34:32.809] [info] [homing.cpp:309] [2110] stepper_name stepper_z over_steps 0 halt_pos -29696 start_pos -335 trig_pos -29696 +[2026-05-03 10:34:32.811] [info] [homing.cpp:152] [2110] kin_spos name stepper_x command_position 316.5 +[2026-05-03 10:34:32.811] [info] [homing.cpp:152] [2110] kin_spos name stepper_y command_position -211.5 +[2026-05-03 10:34:32.811] [info] [homing.cpp:152] [2110] kin_spos name stepper_z command_position 10.570582 +[2026-05-03 10:34:33.942] [info] [mcu.cpp:390] [2162] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 10:34:33.954] [info] [mcu.cpp:634] [2110] home_wait pin_value:1 next_clock:105859655299 +[2026-05-03 10:34:33.955] [info] [homing.cpp:266] [2110] endstop_name z tt 4410.818470791667 trigger_time 4410.818470791667 move_end_print_time 4411.070266833333 +[2026-05-03 10:34:33.955] [info] [homing.cpp:309] [2110] stepper_name stepper_z over_steps 0 halt_pos -29694 start_pos -28896 trig_pos -29694 +[2026-05-03 10:34:33.956] [info] [z_compensation.cpp:264] [2110] ZCompensation handle_home_rails_end +[2026-05-03 10:34:33.956] [info] [z_compensation.cpp:92] [2110] use_fix_ref_temperature true fix_ref_temperature 140 ref_temperature 140.06317946281106 +[2026-05-03 10:34:33.956] [info] [homing_override.cpp:424] [2110] prev_G28 z over +[2026-05-03 10:34:33.956] [info] [homing_override.cpp:426] [2110] manual_move z start +[2026-05-03 10:34:33.957] [info] [homing_override.cpp:438] [2110] manual_move z over +[2026-05-03 10:34:33.957] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"2802"} +[2026-05-03 10:34:33.958] [info] [device_status.cpp:989] [2117] M2202 result_code:2802 +[2026-05-03 10:34:33.958] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"1045"} +[2026-05-03 10:34:33.958] [info] [device_status.cpp:989] [2117] M2202 result_code:1045 +[2026-05-03 10:34:33.958] [info] [extruder.cpp:493] [2110] cmd_M104 temp 220 index -1 wait true +[2026-05-03 10:34:33.958] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:34:33.959] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:34:33.959] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 10:34:33.959] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:220,wait:true +[2026-05-03 10:34:34.867] [info] [verify_heater.cpp:164] [2110] Heater extruder approaching new target of 220 +[2026-05-03 10:34:35.621] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=4458.306728417,half_rtt=0.0002527709998503269,freq=119998360.16581482 +[2026-05-03 10:34:45.623] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:34:45.623] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:34:55.892] [info] [verify_heater.cpp:140] [2110] Heater extruder within range of 220 +[2026-05-03 10:35:02.972] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-03 10:35:02.973] [info] [device_status.cpp:989] [2117] M2202 result_code:1066 +[2026-05-03 10:35:02.973] [info] [heaters.cpp:1236] [2110] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 220 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 10:35:02.973] [info] [mmu.cpp:4617] [2110] M6211 start +[2026-05-03 10:35:02.974] [info] [mmu.cpp:4637] [2110] M6211 printable_height 256 T 0 A true K 75 L 200 M 600 N 300 I 0 J 179 P 5000 Q 220 S 220 R 220 C 2 D 2 +[2026-05-03 10:35:02.974] [info] [mmu.cpp:3820] [2110] get_T_channel channel 0 +[2026-05-03 10:35:02.976] [info] [mmu.cpp:4653] [2110] M6211 z_move 4.9673891375 accel 1000 +[2026-05-03 10:35:02.977] [info] [gcode_move.cpp:52] [2110] G180 select 10 +[2026-05-03 10:35:02.977] [info] [z_compensation.cpp:285] [2110] ZCompensation z_adjust_mm 0.05899838773716373 +[2026-05-03 10:35:02.979] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"1045"} +[2026-05-03 10:35:02.979] [info] [device_status.cpp:989] [2117] M2202 result_code:1045 +[2026-05-03 10:35:02.979] [info] [extruder.cpp:493] [2110] cmd_M104 temp 220 index -1 wait true +[2026-05-03 10:35:02.979] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:35:02.979] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:35:02.979] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 10:35:02.980] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:220,wait:true +[2026-05-03 10:35:02.982] [info] [heaters.cpp:1236] [2110] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 220 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 10:35:02.983] [info] [extruder.cpp:493] [2110] cmd_M104 temp 220 index -1 wait false +[2026-05-03 10:35:02.983] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-03 10:35:02.983] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:35:02.983] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:35:02.984] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 10:35:02.984] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:220,wait:false +[2026-05-03 10:35:02.983] [info] [device_status.cpp:989] [2117] M2202 result_code:1066 +[2026-05-03 10:35:02.988] [info] [mmu.cpp:4101] [2110] Execute filament switch process, retry:0 +[2026-05-03 10:35:02.988] [info] [mmu.cpp:4104] [2110] T: 0 +[2026-05-03 10:35:02.989] [info] [mmu.cpp:3820] [2110] get_T_channel channel 0 +[2026-05-03 10:35:02.989] [info] [mmu.cpp:4114] [2110] CMD_canvas_switch_filament channel 0 fila_in[channel] 1 ex_fila_status 0 +[2026-05-03 10:35:02.989] [info] [mmu.cpp:2520] [2110] start extrude channel check. +[2026-05-03 10:35:02.989] [info] [mmu.cpp:2529] [2110] extrude channel check result: -1 ex_fila_status:0 +[2026-05-03 10:35:02.989] [info] [mmu.cpp:4316] [2110] Extruder head filament sensor not triggered +[2026-05-03 10:35:02.990] [info] [mmu.cpp:4358] [2110] Extruder head filament sensor not triggered +[2026-05-03 10:35:02.990] [info] [mmu.cpp:4445] [2110] Execute filament plug in process. channel: 0 +[2026-05-03 10:35:02.991] [info] [mmu.cpp:2912] [2110] exec auto refill filament start, befor_channel 0 ex_fila_status 0 canvas_status 1 +[2026-05-03 10:35:02.991] [info] [mmu.cpp:2964] [2110] exec auto refill filament over, after_channel 0 ex_fila_status 0 canvas_status 1 +[2026-05-03 10:35:02.991] [info] [mmu.cpp:2382] [2110] feed last_pos_1 channel: 0 ch_1: 0 ch_2: 0 ch_3: 0 ch_4: 0 +[2026-05-03 10:35:05.968] [info] [filament_switch_sensor.cpp:368] [2110] _button_handler switch_fila_det true +[2026-05-03 10:35:05.969] [info] [mmu.cpp:2093] [2110] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-03 10:35:05.969] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-03 10:35:05.970] [info] [filament_switch_sensor.cpp:247] [2110] name:filament_sensor, note_filament_present is_filament_present true filament_present true sensor_enabled 1 canvas_enabled 0 +[2026-05-03 10:35:06.024] [info] [mcu.cpp:712] [2110] set_digital pin PB7 4443.150845958334 4488.711624765 +[2026-05-03 10:35:06.935] [info] [mmu.cpp:2421] [2110] feed last_pos_2 channel: 0 ch_1: 103.3583983031042 ch_2: 0 ch_3: 0 ch_4: 0 +[2026-05-03 10:35:06.936] [info] [gcode_move.cpp:52] [2110] G180 select 820 +[2026-05-03 10:35:07.122] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:35:10.607] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:4447.483908413608,last_temp:220.27065446487535,temp:220.27065446487535,target_temp:220,smoothed_temp:220.7424586342088 +[2026-05-03 10:35:11.264] [info] [mmu.cpp:4511] [2110] Execute rocker arm action +[2026-05-03 10:35:12.265] [info] [mmu.cpp:4522] [2110] Execute rocker arm action complete, dir 1 channel: 0 +[2026-05-03 10:35:12.265] [info] [mmu.cpp:2426] [2110] retry_count 1 last_position 103.3583983031042 ch_position 109.264592491853 +[2026-05-03 10:35:12.265] [info] [mmu.cpp:2432] [2110] feed cur_pos_2 channel: 0 ch_1: 109.264592491853 ch_2: 0 ch_3: 0 ch_4: 0 +[2026-05-03 10:35:12.266] [info] [gcode_move.cpp:52] [2110] G180 select 820 +[2026-05-03 10:35:15.679] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:35:15.680] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:35:16.597] [info] [mmu.cpp:4511] [2110] Execute rocker arm action +[2026-05-03 10:35:17.598] [info] [mmu.cpp:4522] [2110] Execute rocker arm action complete, dir 1 channel: 0 +[2026-05-03 10:35:17.598] [info] [mmu.cpp:2426] [2110] retry_count 2 last_position 103.3583983031042 ch_position 118.12388377497624 +[2026-05-03 10:35:17.598] [info] [mmu.cpp:2432] [2110] feed cur_pos_2 channel: 0 ch_1: 118.12388377497624 ch_2: 0 ch_3: 0 ch_4: 0 +[2026-05-03 10:35:17.598] [info] [mmu.cpp:2450] [2110] extruder_feed success, channel = 0 +[2026-05-03 10:35:17.599] [info] [mmu.cpp:4455] [2110] Execute filament plug in process complete. channel: 0 +[2026-05-03 10:35:17.599] [info] [mmu.cpp:4963] [2110] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 10:35:17.599] [info] [mmu.cpp:4958] [2110] clear_abnormal_feedback #1 __OVER +[2026-05-03 10:35:17.599] [info] [mmu.cpp:4133] [2110] Execute filament switch process complete, channel 0 +[2026-05-03 10:35:17.601] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"1045"} +[2026-05-03 10:35:17.601] [info] [device_status.cpp:989] [2117] M2202 result_code:1045 +[2026-05-03 10:35:17.603] [info] [extruder.cpp:493] [2110] cmd_M104 temp 220 index -1 wait true +[2026-05-03 10:35:17.604] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:35:17.604] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:35:17.604] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 10:35:17.604] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:220,wait:true +[2026-05-03 10:35:18.605] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-03 10:35:18.606] [info] [device_status.cpp:989] [2117] M2202 result_code:1066 +[2026-05-03 10:35:18.608] [info] [heaters.cpp:1236] [2110] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 220 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 10:35:18.609] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:35:18.610] [info] [mmu.cpp:4701] [2110] M6211 flush_times 3 flush_length_actual 61.666666666666664 +[2026-05-03 10:35:18.611] [info] [gcode_move.cpp:52] [2110] G180 select 819 +[2026-05-03 10:35:20.901] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:4457.77800000038,last_temp:57.40894610368906,temp:57.40894610368906,target_temp:55,smoothed_temp:57.42115856986992 +[2026-05-03 10:35:35.910] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:35:41.173] [info] [gcode_move.cpp:52] [2110] G180 select 818 +[2026-05-03 10:35:41.182] [info] [gcode_move.cpp:52] [2110] G180 select 819 +[2026-05-03 10:35:45.731] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:35:45.731] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:35:58.473] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:36:03.737] [info] [gcode_move.cpp:52] [2110] G180 select 818 +[2026-05-03 10:36:03.744] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"1045"} +[2026-05-03 10:36:03.744] [info] [device_status.cpp:989] [2117] M2202 result_code:1045 +[2026-05-03 10:36:03.744] [info] [extruder.cpp:493] [2110] cmd_M104 temp 220 index -1 wait true +[2026-05-03 10:36:03.745] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:36:03.745] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:36:03.745] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 10:36:03.745] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:220,wait:true +[2026-05-03 10:36:06.748] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-03 10:36:06.748] [info] [device_status.cpp:989] [2117] M2202 result_code:1066 +[2026-05-03 10:36:06.748] [info] [heaters.cpp:1236] [2110] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 220 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 10:36:06.749] [info] [toolhead.cpp:904] [2110] get_last_move_time +[2026-05-03 10:36:07.051] [info] [gcode_move.cpp:52] [2110] G180 select 819 +[2026-05-03 10:36:15.784] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:36:15.785] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:36:30.620] [info] [gcode_move.cpp:52] [2110] G180 select 818 +[2026-05-03 10:36:30.629] [info] [mmu.cpp:4730] [2110] M6211 over. complete +[2026-05-03 10:36:30.630] [info] [gcode.cpp:598] [2110] Unknown command: T0 +[2026-05-03 10:36:30.631] [info] [gcode_move.cpp:52] [2110] G180 select 7 +[2026-05-03 10:36:30.632] [info] [gcode.cpp:963] [2110] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=0, BED_MESH_PROFILE=0 +[2026-05-03 10:36:30.632] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = false +[2026-05-03 10:36:30.633] [info] [bed_mesh.cpp:2901] [2110] cmd_BED_MESH_PROFILE: from_slicer 0 execute_calirate_from_slicer 0 +[2026-05-03 10:36:30.648] [info] [bed_mesh.cpp:463] [2110] update_status bed_mesh_exist:0x0100 +[2026-05-03 10:36:30.648] [info] [print_stats.cpp:277] [2110] bed_mesh_exist:0x0100 +[2026-05-03 10:36:30.648] [info] [bed_mesh.cpp:2875] [2110] ProfileManager::load_profile default time 0.015216499999951338 +[2026-05-03 10:36:30.650] [info] [gcode.cpp:1123] [2110] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 10:36:30.650] [info] [gcode.cpp:963] [2110] cmd_SET_CONDITION A=BED_MESH_PROFILE, B=1, BED_MESH_PROFILE=0 +[2026-05-03 10:36:30.650] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = true +[2026-05-03 10:36:30.652] [info] [gcode.cpp:1123] [2110] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 10:36:32.995] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"1045"} +[2026-05-03 10:36:32.996] [info] [device_status.cpp:989] [2117] M2202 result_code:1045 +[2026-05-03 10:36:32.996] [info] [extruder.cpp:493] [2110] cmd_M104 temp 220 index -1 wait true +[2026-05-03 10:36:32.996] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:36:32.996] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name extruder +[2026-05-03 10:36:32.996] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 10:36:32.996] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:220,wait:true +[2026-05-03 10:36:39.001] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-03 10:36:39.002] [info] [device_status.cpp:989] [2117] M2202 result_code:1066 +[2026-05-03 10:36:39.002] [info] [heaters.cpp:1236] [2110] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 220 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 10:36:39.765] [info] [gcode_move.cpp:52] [2110] G180 select 8 +[2026-05-03 10:36:39.766] [info] [bed_mesh.cpp:2901] [2110] cmd_BED_MESH_PROFILE: from_slicer 1 execute_calirate_from_slicer 0 +[2026-05-03 10:36:39.770] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:1 +[2026-05-03 10:36:45.866] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:36:45.867] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:36:50.507] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:37:05.277] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=4607.96282478,half_rtt=0.0002527914998609049,freq=119998341.47468403 +[2026-05-03 10:37:10.609] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:4567.485567432663,last_temp:221.9987641601187,temp:221.9987641601187,target_temp:220,smoothed_temp:221.86190872675894 +[2026-05-03 10:37:15.923] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:37:15.924] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:37:21.401] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:4578.27800000038,last_temp:54.71686670808111,temp:54.71686670808111,target_temp:55,smoothed_temp:54.70916588642554 +[2026-05-03 10:37:25.951] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:37:46.070] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:37:46.071] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:38:16.123] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:38:16.124] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:38:46.180] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:38:46.181] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:39:10.610] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:4687.487255786663,last_temp:220.51428194322716,temp:220.51428194322716,target_temp:220,smoothed_temp:219.9416824134124 +[2026-05-03 10:39:16.230] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:39:16.230] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:39:21.901] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:4698.77800000038,last_temp:55.066609210455795,temp:55.066609210455795,target_temp:55,smoothed_temp:55.05882464562204 +[2026-05-03 10:39:46.296] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:39:46.296] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:39:55.615] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:40:16.353] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:40:16.354] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:40:23.183] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:40:34.014] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:40:40.403] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 10:40:46.416] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:40:46.417] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:40:54.696] [info] [clocksync.cpp:206] [2162] mcu 'mcu': New minimum RTT: sent_time=4837.382181639,half_rtt=7.575000017823186e-05,freq=23999996.049623463 +[2026-05-03 10:41:10.612] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:4807.488955975529,last_temp:219.227012873052,temp:219.227012873052,target_temp:220,smoothed_temp:219.74729657791224 +[2026-05-03 10:41:11.433] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 10:41:16.474] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:41:16.474] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:41:22.401] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:4819.27800000038,last_temp:54.91772660352183,temp:54.91772660352183,target_temp:55,smoothed_temp:54.908386251163535 +[2026-05-03 10:41:30.151] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=4872.8380205309995,half_rtt=0.0002465625002514571,freq=119998281.28238459 +[2026-05-03 10:41:46.537] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:41:46.538] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:42:16.590] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:42:16.591] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:42:46.641] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:42:46.642] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:43:08.616] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 10:43:09.599] [info] [clocksync.cpp:206] [2162] mcu 'mcu': New minimum RTT: sent_time=4972.285850245,half_rtt=7.200000027296483e-05,freq=23999999.312674347 +[2026-05-03 10:43:10.614] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:4927.49068876081,last_temp:221.7902128566284,temp:221.7902128566284,target_temp:220,smoothed_temp:221.7029185184695 +[2026-05-03 10:43:16.689] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:43:16.690] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:43:22.901] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:4939.77800000038,last_temp:55.17046662347832,temp:55.17046662347832,target_temp:55,smoothed_temp:55.123672067810574 +[2026-05-03 10:43:26.349] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:43:27.333] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:43:46.739] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:43:46.740] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:43:47.030] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:44:16.789] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:44:16.790] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:44:27.397] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:44:46.839] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:44:46.840] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:45:06.779] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 10:45:10.616] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:5047.4924817035835,last_temp:220.3517458561875,temp:220.3517458561875,target_temp:220,smoothed_temp:219.93566801255923 +[2026-05-03 10:45:16.894] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:45:16.895] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:45:23.401] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:5060.27800000038,last_temp:55.07353338866233,temp:55.07353338866233,target_temp:55,smoothed_temp:55.05662328278288 +[2026-05-03 10:45:46.952] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:45:46.953] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:45:58.967] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:46:17.013] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:46:17.014] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:46:47.071] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:46:47.072] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:47:10.617] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:5167.494347587758,last_temp:219.1078336950248,temp:219.1078336950248,target_temp:220,smoothed_temp:219.64032582157483 +[2026-05-03 10:47:17.137] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:47:17.138] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:47:23.900] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:5180.77800000038,last_temp:55.04237418136654,temp:55.04237418136654,target_temp:55,smoothed_temp:55.03645199098862 +[2026-05-03 10:47:47.209] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:47:47.210] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:48:10.952] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:48:17.261] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:48:17.262] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:48:47.328] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:48:47.329] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:49:10.618] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:5287.496238171121,last_temp:221.74859588358402,temp:221.74859588358402,target_temp:220,smoothed_temp:221.6562887009081 +[2026-05-03 10:49:17.379] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:49:17.380] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:49:24.399] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:5301.27800000038,last_temp:54.99390219994547,temp:54.99390219994547,target_temp:55,smoothed_temp:54.99433447648381 +[2026-05-03 10:49:33.663] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:49:47.434] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:49:47.435] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:49:57.306] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:50:02.230] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=5384.917922109,time_avg=5355.3750733831375,freq=119998097.78030145,diff=84626.02087402344(0.000705216840616862),stddev=5489.737694931916 +[2026-05-03 10:50:05.184] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 10:50:11.596] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:2 +[2026-05-03 10:50:11.597] [info] [heater_bed.cpp:57] [2110] cmd_M140 temp 55 wait false +[2026-05-03 10:50:11.597] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 10:50:11.597] [info] [verify_heater.cpp:67] [2110] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 10:50:11.597] [info] [heaters.cpp:319] [2110] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 10:50:11.598] [info] [heaters.cpp:1104] [2110] __func__:set_temperature,temp:55,wait:false +[2026-05-03 10:50:17.490] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:50:17.490] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:50:36.741] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:50:47.561] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:50:47.561] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:51:10.619] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:5407.498198321524,last_temp:220.52784794893694,temp:220.52784794893694,target_temp:220,smoothed_temp:219.8104103479943 +[2026-05-03 10:51:17.609] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:51:17.610] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:51:24.898] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:5421.77800000038,last_temp:54.349637921542865,temp:54.349637921542865,target_temp:55,smoothed_temp:54.33918824221198 +[2026-05-03 10:51:47.659] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:51:47.660] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:52:04.384] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=5507.070824667,time_avg=5477.512474026454,freq=119998005.11126779,diff=176679.57470703125(0.0014723297892252603),stddev=5645.620204690601 +[2026-05-03 10:52:17.709] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request + Payload: {"type":"PING"} +[2026-05-03 10:52:17.710] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_response +[2026-05-03 10:53:10.621] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:5527.50019647333,last_temp:218.21545788297863,temp:218.21545788297863,target_temp:220,smoothed_temp:218.73760632644337 +[2026-05-03 10:53:25.398] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:5542.27800000038,last_temp:54.928114577947156,temp:54.928114577947156,target_temp:55,smoothed_temp:54.980821212882695 +[2026-05-03 10:53:30.069] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:53:33.138] [warning] [mqtt_connector.cpp:503] [2167] Client 0cliae9f23 has not communicated for a long time, removing it. +[2026-05-03 10:53:33.138] [info] [mqtt_connector.cpp:115] [2167] Unsubscribed from topic: elegoo/F01CFFQQFN55YKS/0cliae9f23/api_request +[2026-05-03 10:54:09.453] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 10:55:10.622] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:5647.502209595692,last_temp:220.17619606325536,temp:220.17619606325536,target_temp:220,smoothed_temp:221.01883227847227 +[2026-05-03 10:55:25.897] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:5662.77800000038,last_temp:54.98697741840499,temp:54.98697741840499,target_temp:55,smoothed_temp:54.97356735773759 +[2026-05-03 10:57:05.693] [info] [http_server.cpp:466] [2276] System info retrieved successfully. +[2026-05-03 10:57:05.732] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/api_register + Payload: {"request_id":"0cli49e31a","client_id":"0cli49e31a"} +[2026-05-03 10:57:05.732] [info] [mqtt_connector.cpp:529] [2275] client_id: 0cli49e31a, request_id: 0cli49e31a +[2026-05-03 10:57:05.732] [info] [mqtt_connector.cpp:537] [2275] request_topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/register_response +[2026-05-03 10:57:05.733] [info] [mqtt_connector.cpp:554] [2275] subscribe topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_request +[2026-05-03 10:57:05.801] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_request + Payload: {"method":1036,"id":1} +[2026-05-03 10:57:05.802] [info] [api_printer.cpp:2104] [2275] add host task 1036 +[2026-05-03 10:57:05.803] [info] [api_printer.cpp:2058] [2173] process_request1036 +[2026-05-03 10:57:05.803] [info] [device_status.cpp:449] [2173] get history tasks +[2026-05-03 10:57:05.803] [info] [device_status.cpp:458] [2173] Total tasks: 2 +[2026-05-03 10:57:05.803] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_request + Payload: {"method":2005,"id":2} +[2026-05-03 10:57:05.804] [info] [api_printer.cpp:2104] [2275] add host task 2005 +[2026-05-03 10:57:05.804] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_response +[2026-05-03 10:57:05.807] [info] [api_printer.cpp:2058] [2173] process_request2005 +[2026-05-03 10:57:05.809] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_request + Payload: {"method":1044,"params":{"storage_media":"local","offset":0,"limit":20},"id":3} +[2026-05-03 10:57:05.809] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_response +[2026-05-03 10:57:05.811] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 10:57:05.816] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 10:57:05.816] [info] [record_manager.cpp:782] [2173] Getting local files details, total: 11 +[2026-05-03 10:57:05.817] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_request + Payload: {"method":1002,"id":4} +[2026-05-03 10:57:05.818] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 10:57:05.825] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_response +[2026-05-03 10:57:05.826] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 10:57:05.827] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 10:57:05.828] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_response +[2026-05-03 10:57:06.022] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_request + Payload: {"method":1002,"id":5} +[2026-05-03 10:57:06.023] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 10:57:06.023] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 10:57:06.023] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 10:57:06.025] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_response +[2026-05-03 10:57:06.028] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_request + Payload: {"method":1044,"params":{"storage_media":"u-disk","dir":"/","offset":0,"limit":20},"id":6} +[2026-05-03 10:57:06.029] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 10:57:06.030] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 10:57:06.030] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_response +[2026-05-03 10:57:06.033] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_request + Payload: {"method":1001,"id":7} +[2026-05-03 10:57:06.034] [info] [api_printer.cpp:2104] [2275] add host task 1001 +[2026-05-03 10:57:06.034] [info] [api_printer.cpp:2058] [2173] process_request1001 +[2026-05-03 10:57:06.034] [info] [api_printer.cpp:601] [2173] handle_get_system_info +[2026-05-03 10:57:06.036] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_response +[2026-05-03 10:57:06.067] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_request + Payload: {"method":1045,"params":{"storage_media":"local","file_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode"},"id":8} +[2026-05-03 10:57:06.068] [info] [api_printer.cpp:2104] [2275] add host task 1045 +[2026-05-03 10:57:06.069] [info] [api_printer.cpp:2058] [2173] process_request1045 +[2026-05-03 10:57:06.071] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_response +[2026-05-03 10:57:06.076] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_request + Payload: {"method":1042,"id":9} +[2026-05-03 10:57:06.077] [info] [api_printer.cpp:2104] [2275] add host task 1042 +[2026-05-03 10:57:06.077] [info] [api_printer.cpp:2058] [2173] process_request1042 +[2026-05-03 10:57:06.078] [info] [device_status.cpp:436] [2173] get monitor video info: {"url":"http://192.168.0.79:8080/?action=stream"} +[2026-05-03 10:57:06.078] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_response +[2026-05-03 10:57:10.624] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:5767.504236893235,last_temp:222.69961625515725,temp:222.69961625515725,target_temp:220,smoothed_temp:222.12498591562763 +[2026-05-03 10:57:26.397] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:5783.27800000038,last_temp:54.97659014503017,temp:54.97659014503017,target_temp:55,smoothed_temp:54.97401733104075 +[2026-05-03 10:57:29.372] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:57:36.134] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_request + Payload: {"type":"PING"} +[2026-05-03 10:57:36.134] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_response +[2026-05-03 10:57:46.109] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=5848.799203412999,half_rtt=0.0001641045005271735,freq=119998295.7431464 +[2026-05-03 10:57:53.983] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:58:06.200] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_request + Payload: {"type":"PING"} +[2026-05-03 10:58:06.201] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_response +[2026-05-03 10:58:15.645] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 10:59:10.626] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:5887.506274953988,last_temp:219.41290764536842,temp:219.41290764536842,target_temp:220,smoothed_temp:218.99235551371225 +[2026-05-03 10:59:13.133] [warning] [mqtt_connector.cpp:503] [2168] Client 0cli49e31a has not communicated for a long time, removing it. +[2026-05-03 10:59:13.133] [info] [mqtt_connector.cpp:115] [2168] Unsubscribed from topic: elegoo/F01CFFQQFN55YKS/0cli49e31a/api_request +[2026-05-03 10:59:21.630] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=5944.320351751,half_rtt=0.00024902050017772126,freq=119997987.20020936 +[2026-05-03 10:59:26.897] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:5903.77800000038,last_temp:55.0804575158038,temp:55.0804575158038,target_temp:55,smoothed_temp:55.07376829955719 +[2026-05-03 11:00:05.952] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 11:00:09.146] [info] [http_server.cpp:466] [2276] System info retrieved successfully. +[2026-05-03 11:00:09.244] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/api_register + Payload: {"request_id":"0cli76b94e","client_id":"0cli76b94e"} +[2026-05-03 11:00:09.244] [info] [mqtt_connector.cpp:529] [2275] client_id: 0cli76b94e, request_id: 0cli76b94e +[2026-05-03 11:00:09.244] [info] [mqtt_connector.cpp:537] [2275] request_topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/register_response +[2026-05-03 11:00:09.245] [info] [mqtt_connector.cpp:554] [2275] subscribe topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request +[2026-05-03 11:00:09.311] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1036,"id":1} +[2026-05-03 11:00:09.312] [info] [api_printer.cpp:2104] [2275] add host task 1036 +[2026-05-03 11:00:09.313] [info] [api_printer.cpp:2058] [2173] process_request1036 +[2026-05-03 11:00:09.313] [info] [device_status.cpp:449] [2173] get history tasks +[2026-05-03 11:00:09.314] [info] [device_status.cpp:458] [2173] Total tasks: 2 +[2026-05-03 11:00:09.316] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":2005,"id":2} +[2026-05-03 11:00:09.317] [info] [api_printer.cpp:2104] [2275] add host task 2005 +[2026-05-03 11:00:09.318] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:00:09.319] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1044,"params":{"storage_media":"local","offset":0,"limit":20},"id":3} +[2026-05-03 11:00:09.320] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 11:00:09.321] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1002,"id":4} +[2026-05-03 11:00:09.322] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 11:00:09.323] [info] [api_printer.cpp:2058] [2173] process_request2005 +[2026-05-03 11:00:09.325] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:00:09.326] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 11:00:09.327] [info] [record_manager.cpp:782] [2173] Getting local files details, total: 11 +[2026-05-03 11:00:09.333] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:00:09.335] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 11:00:09.335] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 11:00:09.337] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:00:09.514] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1002,"id":5} +[2026-05-03 11:00:09.515] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 11:00:09.515] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 11:00:09.516] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 11:00:09.516] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1044,"params":{"storage_media":"u-disk","dir":"/","offset":0,"limit":20},"id":6} +[2026-05-03 11:00:09.517] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 11:00:09.517] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:00:09.519] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 11:00:09.520] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1001,"id":7} +[2026-05-03 11:00:09.519] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:00:09.521] [info] [api_printer.cpp:2104] [2275] add host task 1001 +[2026-05-03 11:00:09.522] [info] [api_printer.cpp:2058] [2173] process_request1001 +[2026-05-03 11:00:09.522] [info] [api_printer.cpp:601] [2173] handle_get_system_info +[2026-05-03 11:00:09.523] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:00:09.614] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1045,"params":{"storage_media":"local","file_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode"},"id":8} +[2026-05-03 11:00:09.615] [info] [api_printer.cpp:2104] [2275] add host task 1045 +[2026-05-03 11:00:09.615] [info] [api_printer.cpp:2058] [2173] process_request1045 +[2026-05-03 11:00:09.617] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1042,"id":9} +[2026-05-03 11:00:09.618] [info] [api_printer.cpp:2104] [2275] add host task 1042 +[2026-05-03 11:00:09.618] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:00:09.619] [info] [api_printer.cpp:2058] [2173] process_request1042 +[2026-05-03 11:00:09.622] [info] [device_status.cpp:436] [2173] get monitor video info: {"url":"http://192.168.0.79:8080/?action=stream"} +[2026-05-03 11:00:09.622] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:00:39.648] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"type":"PING"} +[2026-05-03 11:00:39.648] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:01:07.982] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=6050.672148926,time_avg=6021.128938170725,freq=119998314.86424986,diff=80296.16259765625(0.000669134688313802),stddev=2387.959938161958 +[2026-05-03 11:01:09.705] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"type":"PING"} +[2026-05-03 11:01:09.706] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:01:10.628] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:6007.508317033422,last_temp:218.3327551927266,temp:218.3327551927266,target_temp:220,smoothed_temp:219.18715486320093 +[2026-05-03 11:01:11.918] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:01:23.735] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=6066.424303017,time_avg=6036.292061377689,freq=119998312.8552425,diff=106303.90771484375(0.0008858658976236979),stddev=2152.1297576644915 +[2026-05-03 11:01:27.397] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:6024.27800000038,last_temp:54.93503982447248,temp:54.93503982447248,target_temp:55,smoothed_temp:54.96799406128679 +[2026-05-03 11:01:30.625] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:01:39.762] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"type":"PING"} +[2026-05-03 11:01:39.763] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:02:09.827] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"type":"PING"} +[2026-05-03 11:02:09.828] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:02:23.813] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:02:25.784] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 11:02:39.885] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"type":"PING"} +[2026-05-03 11:02:39.886] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:02:58.999] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1030,"params":{"box_fan":51},"id":15} +[2026-05-03 11:02:59.000] [info] [api_printer.cpp:2104] [2275] add host task 1030 +[2026-05-03 11:02:59.001] [info] [api_printer.cpp:2058] [2173] process_request1030 +[2026-05-03 11:02:59.001] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:03:00.907] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1030,"params":{"box_fan":51},"id":16} +[2026-05-03 11:03:00.908] [info] [api_printer.cpp:2104] [2275] add host task 1030 +[2026-05-03 11:03:00.909] [info] [api_printer.cpp:2058] [2173] process_request1030 +[2026-05-03 11:03:00.909] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:03:02.181] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1030,"params":{"box_fan":51},"id":17} +[2026-05-03 11:03:02.182] [info] [api_printer.cpp:2104] [2275] add host task 1030 +[2026-05-03 11:03:02.183] [info] [api_printer.cpp:2058] [2173] process_request1030 +[2026-05-03 11:03:02.184] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:03:02.208] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:03:02.545] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1030,"params":{"box_fan":51},"id":18} +[2026-05-03 11:03:02.546] [info] [api_printer.cpp:2104] [2275] add host task 1030 +[2026-05-03 11:03:02.547] [info] [api_printer.cpp:2058] [2173] process_request1030 +[2026-05-03 11:03:02.547] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:03:02.741] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1030,"params":{"box_fan":51},"id":19} +[2026-05-03 11:03:02.743] [info] [api_printer.cpp:2104] [2275] add host task 1030 +[2026-05-03 11:03:02.743] [info] [api_printer.cpp:2058] [2173] process_request1030 +[2026-05-03 11:03:02.743] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:03:03.304] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1030,"params":{"box_fan":51},"id":20} +[2026-05-03 11:03:03.305] [info] [api_printer.cpp:2104] [2275] add host task 1030 +[2026-05-03 11:03:03.305] [info] [api_printer.cpp:2058] [2173] process_request1030 +[2026-05-03 11:03:03.306] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:03:03.493] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1030,"params":{"box_fan":51},"id":21} +[2026-05-03 11:03:03.494] [info] [api_printer.cpp:2104] [2275] add host task 1030 +[2026-05-03 11:03:03.494] [info] [api_printer.cpp:2058] [2173] process_request1030 +[2026-05-03 11:03:03.494] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:03:03.887] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1030,"params":{"box_fan":51},"id":22} +[2026-05-03 11:03:03.888] [info] [api_printer.cpp:2104] [2275] add host task 1030 +[2026-05-03 11:03:03.889] [info] [api_printer.cpp:2058] [2173] process_request1030 +[2026-05-03 11:03:03.889] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:03:07.136] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=6169.826157858,half_rtt=0.0002492710000296938,freq=119997920.56047718 +[2026-05-03 11:03:10.629] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:6127.510383010484,last_temp:221.52716080505218,temp:221.52716080505218,target_temp:220,smoothed_temp:221.87371021247063 +[2026-05-03 11:03:15.605] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request + Payload: {"method":1031,"params":{"mode":2},"id":23} +[2026-05-03 11:03:15.607] [info] [api_printer.cpp:2058] [2110] process_request1031 +[2026-05-03 11:03:15.608] [info] [gcode_move.cpp:647] [2110] cmd_M220 speed 39 speed_factor 0.021666666666666667 130 +[2026-05-03 11:03:15.608] [info] [mqtt_connector.cpp:486] [2110] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_response +[2026-05-03 11:03:27.897] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:6144.77800000038,last_temp:54.99390219994547,temp:54.99390219994547,target_temp:55,smoothed_temp:54.9976786861815 +[2026-05-03 11:03:59.314] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:04:15.065] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:04:31.804] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:04:33.133] [warning] [mqtt_connector.cpp:503] [2168] Client 0cli76b94e has not communicated for a long time, removing it. +[2026-05-03 11:04:33.134] [info] [mqtt_connector.cpp:115] [2168] Unsubscribed from topic: elegoo/F01CFFQQFN55YKS/0cli76b94e/api_request +[2026-05-03 11:04:35.745] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=6258.4350619,time_avg=6228.894573113859,freq=119998307.15273847,diff=65354.442138671875(0.000544620351155599),stddev=1993.0994925666732 +[2026-05-03 11:04:35.745] [info] [clocksync.cpp:219] [2162] mcu 'mcu': Ignoring clock sample: sent_time=6258.434361942,time_avg=6228.8964820772035,freq=24000000.174821228,diff=22385.783782958984(0.0009327409909566243),stddev=541.6481703306335 +[2026-05-03 11:05:10.632] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:6247.512442162627,last_temp:222.40418568738198,temp:222.40418568738198,target_temp:220,smoothed_temp:221.52978174435844 +[2026-05-03 11:05:28.396] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:6265.27800000038,last_temp:54.94542759018384,temp:54.94542759018384,target_temp:55,smoothed_temp:54.96201626258849 +[2026-05-03 11:05:37.784] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:05:57.916] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 11:06:24.061] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:07:10.633] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:6367.514528313458,last_temp:219.21375822812894,temp:219.21375822812894,target_temp:220,smoothed_temp:219.11664229216623 +[2026-05-03 11:07:28.897] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:6385.77800000038,last_temp:55.00775160233189,temp:55.00775160233189,target_temp:55,smoothed_temp:54.98375222688575 +[2026-05-03 11:07:48.731] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=6451.420651534,time_avg=6421.885657022812,freq=119997910.04535915,diff=77749.61108398438(0.0006479134256998697),stddev=2708.1936292885457 +[2026-05-03 11:08:20.238] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 11:08:35.113] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.05945544895121 last_speed:0.1 -> speed:0.2 +[2026-05-03 11:09:10.635] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:6487.516642581398,last_temp:218.93613182553838,temp:218.93613182553838,target_temp:220,smoothed_temp:219.77818112632767 +[2026-05-03 11:09:29.397] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:6506.27800000038,last_temp:54.959277751366756,temp:54.959277751366756,target_temp:55,smoothed_temp:54.960483766048675 +[2026-05-03 11:10:10.397] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 11:10:30.218] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:10:32.122] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 11:11:10.637] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:6607.518716270288,last_temp:221.77633708669964,temp:221.77633708669964,target_temp:220,smoothed_temp:221.8986556437671 +[2026-05-03 11:11:29.897] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:6626.77800000038,last_temp:54.928114577947156,temp:54.928114577947156,target_temp:55,smoothed_temp:54.98186828148452 +[2026-05-03 11:11:45.150] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.9228021130416 last_speed:0.2 -> speed:0.1 +[2026-05-03 11:11:54.890] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:12:24.425] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:12:45.152] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.00321990459071 last_speed:0.1 -> speed:0.2 +[2026-05-03 11:13:10.640] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:6727.520789047086,last_temp:222.12426983551097,temp:222.12426983551097,target_temp:220,smoothed_temp:221.2786269111602 +[2026-05-03 11:13:30.396] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:6747.27800000038,last_temp:55.00082692784645,temp:55.00082692784645,target_temp:55,smoothed_temp:54.976744234067155 +[2026-05-03 11:13:45.153] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.85034386627876 last_speed:0.2 -> speed:0.1 +[2026-05-03 11:14:31.457] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:14:45.157] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.02330939330869 last_speed:0.1 -> speed:0.2 +[2026-05-03 11:15:10.641] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:6847.522842834922,last_temp:218.7912549379256,temp:218.7912549379256,target_temp:220,smoothed_temp:218.73963538128373 +[2026-05-03 11:15:24.398] [info] [http_server.cpp:466] [2276] System info retrieved successfully. +[2026-05-03 11:15:24.431] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/api_register + Payload: {"request_id":"0cli5614e0","client_id":"0cli5614e0"} +[2026-05-03 11:15:24.432] [info] [mqtt_connector.cpp:529] [2275] client_id: 0cli5614e0, request_id: 0cli5614e0 +[2026-05-03 11:15:24.432] [info] [mqtt_connector.cpp:537] [2275] request_topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/register_response +[2026-05-03 11:15:24.434] [info] [mqtt_connector.cpp:554] [2275] subscribe topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request +[2026-05-03 11:15:24.509] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"method":1036,"id":1} +[2026-05-03 11:15:24.510] [info] [api_printer.cpp:2104] [2275] add host task 1036 +[2026-05-03 11:15:24.511] [info] [api_printer.cpp:2058] [2173] process_request1036 +[2026-05-03 11:15:24.511] [info] [device_status.cpp:449] [2173] get history tasks +[2026-05-03 11:15:24.511] [info] [device_status.cpp:458] [2173] Total tasks: 2 +[2026-05-03 11:15:24.512] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:15:24.514] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"method":2005,"id":2} +[2026-05-03 11:15:24.515] [info] [api_printer.cpp:2104] [2275] add host task 2005 +[2026-05-03 11:15:24.515] [info] [api_printer.cpp:2058] [2173] process_request2005 +[2026-05-03 11:15:24.518] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:15:24.519] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"method":1044,"params":{"storage_media":"local","offset":0,"limit":20},"id":3} +[2026-05-03 11:15:24.522] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 11:15:24.525] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 11:15:24.525] [info] [record_manager.cpp:782] [2173] Getting local files details, total: 11 +[2026-05-03 11:15:24.531] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:15:24.533] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"method":1002,"id":4} +[2026-05-03 11:15:24.534] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 11:15:24.535] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 11:15:24.535] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 11:15:24.538] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:15:24.907] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"method":1002,"id":5} +[2026-05-03 11:15:24.908] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 11:15:24.908] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 11:15:24.908] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 11:15:24.909] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"method":1044,"params":{"storage_media":"u-disk","dir":"/","offset":0,"limit":20},"id":6} +[2026-05-03 11:15:24.910] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 11:15:24.910] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:15:24.911] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"method":1001,"id":7} +[2026-05-03 11:15:24.913] [info] [api_printer.cpp:2104] [2275] add host task 1001 +[2026-05-03 11:15:24.914] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 11:15:24.915] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:15:24.915] [info] [api_printer.cpp:2058] [2173] process_request1001 +[2026-05-03 11:15:24.915] [info] [api_printer.cpp:601] [2173] handle_get_system_info +[2026-05-03 11:15:24.916] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:15:24.971] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"method":1045,"params":{"storage_media":"local","file_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode"},"id":8} +[2026-05-03 11:15:24.973] [info] [api_printer.cpp:2104] [2275] add host task 1045 +[2026-05-03 11:15:24.974] [info] [api_printer.cpp:2058] [2173] process_request1045 +[2026-05-03 11:15:24.974] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"method":1042,"id":9} +[2026-05-03 11:15:24.975] [info] [api_printer.cpp:2104] [2275] add host task 1042 +[2026-05-03 11:15:24.977] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:15:24.977] [info] [api_printer.cpp:2058] [2173] process_request1042 +[2026-05-03 11:15:24.980] [info] [device_status.cpp:436] [2173] get monitor video info: {"url":"http://192.168.0.79:8080/?action=stream"} +[2026-05-03 11:15:24.980] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:15:30.896] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:6867.77800000038,last_temp:54.903875774453695,temp:54.903875774453695,target_temp:55,smoothed_temp:54.951670028132504 +[2026-05-03 11:15:55.031] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:15:55.032] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:16:00.077] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=6942.767344102,time_avg=6913.228681864162,freq=119998268.26571731,diff=68342.19128417969(0.0005695182607014974),stddev=1923.8530883258334 +[2026-05-03 11:16:00.078] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=6942.767540185,time_avg=6913.229546463249,freq=119997941.87307817,diff=60725.38854980469(0.0005060449045817057),stddev=1992.2407970835984 +[2026-05-03 11:16:05.188] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.9228021130416 last_speed:0.2 -> speed:0.1 +[2026-05-03 11:16:25.097] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:16:25.098] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:16:43.393] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:16:55.165] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:16:55.166] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:17:10.643] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:6967.524891529135,last_temp:218.92294573089106,temp:218.92294573089106,target_temp:220,smoothed_temp:219.83404663541026 +[2026-05-03 11:17:25.193] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.03536022297811 last_speed:0.1 -> speed:0.2 +[2026-05-03 11:17:25.232] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:17:25.232] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:17:31.397] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:6988.27800000038,last_temp:54.94889015111272,temp:54.94889015111272,target_temp:55,smoothed_temp:54.99043888584453 +[2026-05-03 11:17:42.466] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:17:55.330] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:17:55.330] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:18:25.382] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:18:25.383] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:18:38.602] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:18:55.486] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:18:55.487] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:19:10.645] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:7087.526918067718,last_temp:221.8874398887,temp:221.8874398887,target_temp:220,smoothed_temp:222.02614450859863 +[2026-05-03 11:19:25.569] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:19:25.570] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:19:31.896] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:7108.77800000038,last_temp:55.10815351819434,temp:55.10815351819434,target_temp:55,smoothed_temp:55.05959155744315 +[2026-05-03 11:19:35.200] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.66481564688411 last_speed:0.2 -> speed:0.1 +[2026-05-03 11:19:46.765] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 11:19:55.631] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:19:55.632] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:20:25.687] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:20:25.687] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:20:36.012] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:3 +[2026-05-03 11:20:48.586] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:20:55.761] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:20:55.761] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:21:08.819] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 11:21:10.259] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=7252.95013575,time_avg=7223.398883370827,freq=119997965.49076891,diff=71425.17895507812(0.000595209824625651),stddev=5049.043448360447 +[2026-05-03 11:21:10.647] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:7207.528931869081,last_temp:222.25005828911753,temp:222.25005828911753,target_temp:220,smoothed_temp:221.3955619978167 +[2026-05-03 11:21:17.152] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=7259.841422961001,time_avg=7229.490008708341,freq=119997949.6516706,diff=163822.51110839844(0.001365187592569987),stddev=4686.328257877355 +[2026-05-03 11:21:25.849] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:21:25.850] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:21:32.396] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:7229.27800000038,last_temp:54.952352698267475,temp:54.952352698267475,target_temp:55,smoothed_temp:54.96710686981493 +[2026-05-03 11:21:55.910] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:21:55.911] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:22:15.261] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:22:25.964] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:22:25.965] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:22:56.022] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:22:56.023] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:23:10.649] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:7327.5310304698605,last_temp:218.7518078888088,temp:218.7518078888088,target_temp:220,smoothed_temp:218.73646634481452 +[2026-05-03 11:23:26.115] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:23:26.116] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:23:32.896] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:7349.77800000038,last_temp:54.96966522841069,temp:54.96966522841069,target_temp:55,smoothed_temp:55.00013057589159 +[2026-05-03 11:23:40.929] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 11:23:56.194] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:23:56.195] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:24:26.267] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:24:26.268] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:24:42.976] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 11:24:56.328] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request + Payload: {"type":"PING"} +[2026-05-03 11:24:56.329] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_response +[2026-05-03 11:25:10.651] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:7447.533110980792,last_temp:218.87023231976463,temp:218.87023231976463,target_temp:220,smoothed_temp:219.76005784848357 +[2026-05-03 11:25:16.451] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:25:33.396] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:7470.27800000038,last_temp:54.980052583001,temp:54.980052583001,target_temp:55,smoothed_temp:54.99496994763073 +[2026-05-03 11:25:55.838] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:26:13.134] [warning] [mqtt_connector.cpp:503] [2168] Client 0cli5614e0 has not communicated for a long time, removing it. +[2026-05-03 11:26:13.134] [info] [mqtt_connector.cpp:115] [2168] Unsubscribed from topic: elegoo/F01CFFQQFN55YKS/0cli5614e0/api_request +[2026-05-03 11:27:00.819] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=7603.511030332999,half_rtt=0.00016810450051707448,freq=119998273.92513464 +[2026-05-03 11:27:01.806] [info] [clocksync.cpp:206] [2162] mcu 'mcu': New minimum RTT: sent_time=7604.498834417,half_rtt=7.889600010457798e-05,freq=23999998.191138122 +[2026-05-03 11:27:10.653] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:7567.535204782046,last_temp:222.0266299401826,temp:222.0266299401826,target_temp:220,smoothed_temp:222.19146402538408 +[2026-05-03 11:27:33.896] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:7590.77800000038,last_temp:54.99390219994547,temp:54.99390219994547,target_temp:55,smoothed_temp:54.98818906223526 +[2026-05-03 11:28:05.273] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.00321990459071 last_speed:0.1 -> speed:0.2 +[2026-05-03 11:29:10.655] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:7687.537321261645,last_temp:221.55479224095689,temp:221.55479224095689,target_temp:220,smoothed_temp:220.6901269753648 +[2026-05-03 11:29:14.770] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=7737.461923356,half_rtt=0.00025227050036846776,freq=119997883.95967862 +[2026-05-03 11:29:34.395] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:7711.27800000038,last_temp:55.00082692784645,temp:55.00082692784645,target_temp:55,smoothed_temp:55.02151487261512 +[2026-05-03 11:29:36.426] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:29:50.221] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 11:29:54.157] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=7776.849714208,half_rtt=0.00016825000011522206,freq=119998282.35531864 +[2026-05-03 11:30:04.004] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:30:31.574] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 11:31:00.124] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:31:10.657] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:7807.539435832602,last_temp:218.7518078888088,temp:218.7518078888088,target_temp:220,smoothed_temp:218.71450133290026 +[2026-05-03 11:31:19.816] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=7862.508377165,half_rtt=0.0001660835000620864,freq=119998282.97290078 +[2026-05-03 11:31:34.895] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:7831.77800000038,last_temp:55.01467622362594,temp:55.01467622362594,target_temp:55,smoothed_temp:55.0180042803733 +[2026-05-03 11:32:44.053] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 11:32:45.291] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.575901596238964 last_speed:0.2 -> speed:0.1 +[2026-05-03 11:33:10.659] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:7927.541571342878,last_temp:219.12106332632237,temp:219.12106332632237,target_temp:220,smoothed_temp:220.05199998543068 +[2026-05-03 11:33:12.087] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 11:33:31.792] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:33:35.396] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:7952.27800000038,last_temp:55.063147102133314,temp:55.063147102133314,target_temp:55,smoothed_temp:55.1052745865276 +[2026-05-03 11:33:41.531] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:4 +[2026-05-03 11:33:45.295] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.015274314094995 last_speed:0.1 -> speed:0.2 +[2026-05-03 11:34:02.318] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:34:16.105] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:34:19.131] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 11:35:10.661] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:8047.543673668127,last_temp:222.41821839799894,temp:222.41821839799894,target_temp:220,smoothed_temp:222.2405748748019 +[2026-05-03 11:35:12.255] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:35:18.165] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=8100.857359195001,half_rtt=0.00024662499981786823,freq=119997888.76514836 +[2026-05-03 11:35:22.100] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:35:35.896] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:8072.77800000038,last_temp:54.94542759018384,temp:54.94542759018384,target_temp:55,smoothed_temp:54.994057826876656 +[2026-05-03 11:36:15.278] [info] [clocksync.cpp:206] [2162] mcu 'mcu': New minimum RTT: sent_time=8157.970658389,half_rtt=7.589599999846541e-05,freq=23999998.427525274 +[2026-05-03 11:37:10.663] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:8167.545777166352,last_temp:221.41677149538623,temp:221.41677149538623,target_temp:220,smoothed_temp:220.46987998450373 +[2026-05-03 11:37:33.085] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=8235.777032050999,time_avg=8206.236832352935,freq=119997867.87959664,diff=89308.09191894531(0.0007442340993245442),stddev=2254.9879610619896 +[2026-05-03 11:37:36.395] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:8193.27800000038,last_temp:54.98697741840499,temp:54.98697741840499,target_temp:55,smoothed_temp:54.979289334846584 +[2026-05-03 11:37:38.009] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 11:37:44.899] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=8247.590795432001,time_avg=8218.052187109723,freq=119998291.84987074,diff=70973.20690917969(0.0005914433909098307),stddev=1635.545915029515 +[2026-05-03 11:37:45.337] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:34.90517263430519 last_speed:0.2 -> speed:0.1 +[2026-05-03 11:39:10.665] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:8287.54792328298,last_temp:218.50261830756858,temp:218.50261830756858,target_temp:220,smoothed_temp:218.68025386454678 +[2026-05-03 11:39:36.894] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:8313.77800000038,last_temp:55.125463112962734,temp:55.125463112962734,target_temp:55,smoothed_temp:55.12348778451181 +[2026-05-03 11:39:52.024] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=8374.717372284,half_rtt=0.00016529200001969002,freq=119998293.52980581 +[2026-05-03 11:39:53.007] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:40:11.719] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 11:40:32.414] [info] [clocksync.cpp:206] [2162] mcu 'mcu': New minimum RTT: sent_time=8415.106592762,half_rtt=6.889599990245188e-05,freq=23999997.45308661 +[2026-05-03 11:41:10.666] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:8407.550050526723,last_temp:219.97432019231724,temp:219.97432019231724,target_temp:220,smoothed_temp:220.76509434270034 +[2026-05-03 11:41:35.351] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.14773146578932 last_speed:0.1 -> speed:0.2 +[2026-05-03 11:41:37.394] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:8434.27800000038,last_temp:54.99390219994547,temp:54.99390219994547,target_temp:55,smoothed_temp:54.95862361236718 +[2026-05-03 11:41:51.179] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 11:42:32.528] [info] [clocksync.cpp:206] [2162] mcu 'mcu': New minimum RTT: sent_time=8535.221224819,half_rtt=6.712499998684507e-05,freq=23999999.742006607 +[2026-05-03 11:42:33.523] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=8536.215721069999,time_avg=8506.67136470296,freq=119997877.28776462,diff=68911.34948730469(0.0005742612457275391),stddev=2622.76499969536 +[2026-05-03 11:42:35.354] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:37.016414459166015 last_speed:0.2 -> speed:0.3 +[2026-05-03 11:43:10.668] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:8527.55219333425,last_temp:222.4743845534632,temp:222.4743845534632,target_temp:220,smoothed_temp:222.2154768677904 +[2026-05-03 11:43:37.894] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:8554.77800000038,last_temp:54.928114577947156,temp:54.928114577947156,target_temp:55,smoothed_temp:54.95066503383288 +[2026-05-03 11:43:41.459] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:44:44.480] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:45:10.671] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:8647.554322449414,last_temp:221.47193889147132,temp:221.47193889147132,target_temp:220,smoothed_temp:220.61368870649193 +[2026-05-03 11:45:38.393] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:8675.27800000038,last_temp:54.94542759018384,temp:54.94542759018384,target_temp:55,smoothed_temp:54.96195893405275 +[2026-05-03 11:45:47.512] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:45:55.365] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.61633185746172 last_speed:0.3 -> speed:0.1 +[2026-05-03 11:46:00.319] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:46:07.666] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:5 +[2026-05-03 11:46:31.846] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:46:40.709] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:47:10.671] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:8767.556442120629,last_temp:218.39802636893876,temp:218.39802636893876,target_temp:220,smoothed_temp:218.89873609064497 +[2026-05-03 11:47:38.893] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:8795.77800000038,last_temp:55.00775160233189,temp:55.00775160233189,target_temp:55,smoothed_temp:54.97019209297878 +[2026-05-03 11:48:32.957] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:48:58.554] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=8921.248201212,time_avg=8891.712838066964,freq=119998291.8461708,diff=82708.63708496094(0.0006892386423746745),stddev=2066.0038514569524 +[2026-05-03 11:48:58.555] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=8921.248447795,time_avg=8891.713362097702,freq=119997883.54571517,diff=70043.99682617188(0.0005836999735514323),stddev=3517.9998309472976 +[2026-05-03 11:49:10.673] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:8887.558554659581,last_temp:220.36527251657037,temp:220.36527251657037,target_temp:220,smoothed_temp:221.15796059622016 +[2026-05-03 11:49:39.393] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:8916.27800000038,last_temp:55.17046662347832,temp:55.17046662347832,target_temp:55,smoothed_temp:55.10003000476509 +[2026-05-03 11:50:37.192] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 11:51:04.604] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 11:51:10.675] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:9007.560682588575,last_temp:222.69961625515725,temp:222.69961625515725,target_temp:220,smoothed_temp:222.26171983631158 +[2026-05-03 11:51:39.892] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:9036.77800000038,last_temp:55.025063056323006,temp:55.025063056323006,target_temp:55,smoothed_temp:54.99923832304604 +[2026-05-03 11:52:55.412] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.019291973029624 last_speed:0.1 -> speed:0.2 +[2026-05-03 11:53:10.677] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:9127.562818231772,last_temp:220.65009023062436,temp:220.65009023062436,target_temp:220,smoothed_temp:219.94197581976474 +[2026-05-03 11:53:40.392] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:9157.27800000038,last_temp:54.903875774453695,temp:54.903875774453695,target_temp:55,smoothed_temp:54.94319034709763 +[2026-05-03 11:54:05.415] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:37.05996342697745 last_speed:0.2 -> speed:0.3 +[2026-05-03 11:54:07.781] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=9230.475984026001,time_avg=9200.936778645735,freq=119998290.19335796,diff=81563.5(0.0006796958333333333),stddev=1562.119127457481 +[2026-05-03 11:55:10.679] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:9247.564961839358,last_temp:218.17641314571563,temp:218.17641314571563,target_temp:220,smoothed_temp:218.68508275987176 +[2026-05-03 11:55:19.750] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 11:55:40.892] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:9277.77800000038,last_temp:54.962740257367386,temp:54.962740257367386,target_temp:55,smoothed_temp:54.978773488986654 +[2026-05-03 11:55:48.223] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=9330.919082032,half_rtt=0.0002496665001672227,freq=119997849.61706601 +[2026-05-03 11:56:45.424] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.660776683221 last_speed:0.3 -> speed:0.1 +[2026-05-03 11:57:10.681] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:9367.567105372817,last_temp:220.08189675016058,temp:220.08189675016058,target_temp:220,smoothed_temp:220.84964691743667 +[2026-05-03 11:57:41.391] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:9398.27800000038,last_temp:55.1012295930758,temp:55.1012295930758,target_temp:55,smoothed_temp:55.083077668418504 +[2026-05-03 11:57:41.488] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:57:43.459] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 11:57:58.976] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:6 +[2026-05-03 11:58:05.432] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.05945544895121 last_speed:0.1 -> speed:0.2 +[2026-05-03 11:58:44.510] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 11:58:49.429] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 11:59:10.682] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:9487.569207333243,last_temp:222.65731599312505,temp:222.65731599312505,target_temp:220,smoothed_temp:222.4438863722164 +[2026-05-03 11:59:41.891] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:9518.77800000038,last_temp:55.01121391961385,temp:55.01121391961385,target_temp:55,smoothed_temp:55.01973409533786 +[2026-05-03 12:00:09.208] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:00:09.210] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=9591.90618849,time_avg=9562.36696381337,freq=119998283.55573325,diff=68647.81616210938(0.0005720651346842448),stddev=3494.5316682967014 +[2026-05-03 12:01:10.684] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:9607.571341340607,last_temp:221.3892082064291,temp:221.3892082064291,target_temp:220,smoothed_temp:220.5068069180072 +[2026-05-03 12:01:37.835] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:01:42.390] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:9639.27800000038,last_temp:55.045836367209404,temp:55.045836367209404,target_temp:55,smoothed_temp:55.00612247701462 +[2026-05-03 12:01:45.464] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:34.93376935634382 last_speed:0.2 -> speed:0.1 +[2026-05-03 12:03:10.685] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:9727.573461003209,last_temp:218.59429635141362,temp:218.59429635141362,target_temp:220,smoothed_temp:218.67026997278933 +[2026-05-03 12:03:42.888] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:9759.77800000038,last_temp:55.07699545860214,temp:55.07699545860214,target_temp:55,smoothed_temp:55.086688448337625 +[2026-05-03 12:04:57.254] [info] [http_server.cpp:466] [2276] System info retrieved successfully. +[2026-05-03 12:04:57.328] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/api_register + Payload: {"request_id":"0cli2b41ed","client_id":"0cli2b41ed"} +[2026-05-03 12:04:57.328] [info] [mqtt_connector.cpp:529] [2275] client_id: 0cli2b41ed, request_id: 0cli2b41ed +[2026-05-03 12:04:57.329] [info] [mqtt_connector.cpp:537] [2275] request_topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/register_response +[2026-05-03 12:04:57.329] [info] [mqtt_connector.cpp:554] [2275] subscribe topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_request +[2026-05-03 12:04:57.424] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_request + Payload: {"method":1036,"id":1} +[2026-05-03 12:04:57.425] [info] [api_printer.cpp:2104] [2275] add host task 1036 +[2026-05-03 12:04:57.425] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_request + Payload: {"method":2005,"id":2} +[2026-05-03 12:04:57.426] [info] [api_printer.cpp:2058] [2173] process_request1036 +[2026-05-03 12:04:57.426] [info] [device_status.cpp:449] [2173] get history tasks +[2026-05-03 12:04:57.426] [info] [device_status.cpp:458] [2173] Total tasks: 2 +[2026-05-03 12:04:57.426] [info] [api_printer.cpp:2104] [2275] add host task 2005 +[2026-05-03 12:04:57.427] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_request + Payload: {"method":1044,"params":{"storage_media":"local","offset":0,"limit":20},"id":3} +[2026-05-03 12:04:57.428] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_response +[2026-05-03 12:04:57.428] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 12:04:57.429] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_request + Payload: {"method":1002,"id":4} +[2026-05-03 12:04:57.430] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 12:04:57.431] [info] [api_printer.cpp:2058] [2173] process_request2005 +[2026-05-03 12:04:57.433] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_response +[2026-05-03 12:04:57.434] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 12:04:57.434] [info] [record_manager.cpp:782] [2173] Getting local files details, total: 11 +[2026-05-03 12:04:57.442] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_response +[2026-05-03 12:04:57.445] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 12:04:57.445] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 12:04:57.447] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_response +[2026-05-03 12:04:57.813] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_request + Payload: {"method":1002,"id":5} +[2026-05-03 12:04:57.814] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 12:04:57.815] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 12:04:57.816] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 12:04:57.816] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_request + Payload: {"method":1044,"params":{"storage_media":"u-disk","dir":"/","offset":0,"limit":20},"id":6} +[2026-05-03 12:04:57.817] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_response +[2026-05-03 12:04:57.817] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 12:04:57.820] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_request + Payload: {"method":1001,"id":7} +[2026-05-03 12:04:57.820] [info] [api_printer.cpp:2104] [2275] add host task 1001 +[2026-05-03 12:04:57.822] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 12:04:57.822] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_response +[2026-05-03 12:04:57.823] [info] [api_printer.cpp:2058] [2173] process_request1001 +[2026-05-03 12:04:57.823] [info] [api_printer.cpp:601] [2173] handle_get_system_info +[2026-05-03 12:04:57.824] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_response +[2026-05-03 12:04:57.894] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_request + Payload: {"method":1045,"params":{"storage_media":"local","file_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode"},"id":8} +[2026-05-03 12:04:57.895] [info] [api_printer.cpp:2104] [2275] add host task 1045 +[2026-05-03 12:04:57.896] [info] [api_printer.cpp:2058] [2173] process_request1045 +[2026-05-03 12:04:57.896] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_request + Payload: {"method":1042,"id":9} +[2026-05-03 12:04:57.900] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_response +[2026-05-03 12:04:57.901] [info] [api_printer.cpp:2104] [2275] add host task 1042 +[2026-05-03 12:04:57.902] [info] [api_printer.cpp:2058] [2173] process_request1042 +[2026-05-03 12:04:57.905] [info] [device_status.cpp:436] [2173] get monitor video info: {"url":"http://192.168.0.79:8080/?action=stream"} +[2026-05-03 12:04:57.905] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_response +[2026-05-03 12:05:10.685] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:9847.575606428294,last_temp:219.05494635193497,temp:219.05494635193497,target_temp:220,smoothed_temp:219.93657512645657 +[2026-05-03 12:05:27.930] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_request + Payload: {"type":"PING"} +[2026-05-03 12:05:27.931] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_response +[2026-05-03 12:05:43.387] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:9880.27800000038,last_temp:54.89348750429514,temp:54.89348750429514,target_temp:55,smoothed_temp:54.92702809615717 +[2026-05-03 12:05:57.997] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_request + Payload: {"type":"PING"} +[2026-05-03 12:05:57.998] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_response +[2026-05-03 12:06:20.421] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=9963.122342708,half_rtt=0.00016883349962881766,freq=119998286.75196566 +[2026-05-03 12:06:28.058] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_request + Payload: {"type":"PING"} +[2026-05-03 12:06:28.059] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_response +[2026-05-03 12:06:35.189] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=9977.890207882,half_rtt=0.00024408350054727634,freq=119997895.6250383 +[2026-05-03 12:06:42.079] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 12:07:10.685] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:9967.577733162296,last_temp:221.98483648321314,temp:221.98483648321314,target_temp:220,smoothed_temp:222.07531943884405 +[2026-05-03 12:07:33.138] [warning] [mqtt_connector.cpp:503] [2167] Client 0cli2b41ed has not communicated for a long time, removing it. +[2026-05-03 12:07:33.138] [info] [mqtt_connector.cpp:115] [2167] Unsubscribed from topic: elegoo/F01CFFQQFN55YKS/0cli2b41ed/api_request +[2026-05-03 12:07:43.885] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:10000.77800000038,last_temp:54.952352698267475,temp:54.952352698267475,target_temp:55,smoothed_temp:54.94563165842319 +[2026-05-03 12:07:49.120] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:08:15.537] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.07149984938354 last_speed:0.1 -> speed:0.2 +[2026-05-03 12:09:10.686] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:10087.579877865255,last_temp:222.09635529431898,temp:222.09635529431898,target_temp:220,smoothed_temp:221.25549797591552 +[2026-05-03 12:09:44.383] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:10121.27800000038,last_temp:55.11853931229189,temp:55.11853931229189,target_temp:55,smoothed_temp:55.10399867188868 +[2026-05-03 12:09:55.540] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:37.03621274264634 last_speed:0.2 -> speed:0.3 +[2026-05-03 12:10:42.418] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:11:10.687] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:10207.582030773558,last_temp:218.93613182553838,temp:218.93613182553838,target_temp:220,smoothed_temp:218.8301603163205 +[2026-05-03 12:11:44.883] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:10241.77800000038,last_temp:55.00775160233189,temp:55.00775160233189,target_temp:55,smoothed_temp:54.986561003998226 +[2026-05-03 12:12:07.097] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=10309.801528915,time_avg=10280.263688772662,freq=119998282.25906111,diff=74458.25537109375(0.0006204854614257812),stddev=3213.641229052894 +[2026-05-03 12:12:07.099] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=10309.801737332,time_avg=10280.264544829315,freq=119997894.61236593,diff=63103.38720703125(0.0005258615600585938),stddev=4756.339581541034 +[2026-05-03 12:12:23.837] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:12:24.821] [warning] [clocksync.cpp:181] [2110] queries_pending 3 +[2026-05-03 12:12:47.050] [info] [http_server.cpp:466] [2276] System info retrieved successfully. +[2026-05-03 12:12:47.132] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/api_register + Payload: {"request_id":"0cli9e6a82","client_id":"0cli9e6a82"} +[2026-05-03 12:12:47.132] [info] [mqtt_connector.cpp:529] [2275] client_id: 0cli9e6a82, request_id: 0cli9e6a82 +[2026-05-03 12:12:47.133] [info] [mqtt_connector.cpp:537] [2275] request_topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/register_response +[2026-05-03 12:12:47.133] [info] [mqtt_connector.cpp:554] [2275] subscribe topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_request +[2026-05-03 12:12:47.213] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_request + Payload: {"method":1036,"id":1} +[2026-05-03 12:12:47.215] [info] [api_printer.cpp:2104] [2275] add host task 1036 +[2026-05-03 12:12:47.215] [info] [api_printer.cpp:2058] [2173] process_request1036 +[2026-05-03 12:12:47.215] [info] [device_status.cpp:449] [2173] get history tasks +[2026-05-03 12:12:47.215] [info] [device_status.cpp:458] [2173] Total tasks: 2 +[2026-05-03 12:12:47.217] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_response +[2026-05-03 12:12:47.218] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_request + Payload: {"method":2005,"id":2} +[2026-05-03 12:12:47.219] [info] [api_printer.cpp:2104] [2275] add host task 2005 +[2026-05-03 12:12:47.220] [info] [api_printer.cpp:2058] [2173] process_request2005 +[2026-05-03 12:12:47.221] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_request + Payload: {"method":1044,"params":{"storage_media":"local","offset":0,"limit":20},"id":3} +[2026-05-03 12:12:47.222] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 12:12:47.224] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_response +[2026-05-03 12:12:47.225] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 12:12:47.225] [info] [record_manager.cpp:782] [2173] Getting local files details, total: 11 +[2026-05-03 12:12:47.226] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_request + Payload: {"method":1002,"id":4} +[2026-05-03 12:12:47.227] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 12:12:47.242] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_response +[2026-05-03 12:12:47.244] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 12:12:47.245] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 12:12:47.249] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_response +[2026-05-03 12:12:47.617] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_request + Payload: {"method":1002,"id":5} +[2026-05-03 12:12:47.618] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 12:12:47.618] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 12:12:47.618] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 12:12:47.621] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_request + Payload: {"method":1044,"params":{"storage_media":"u-disk","dir":"/","offset":0,"limit":20},"id":6} +[2026-05-03 12:12:47.621] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_response +[2026-05-03 12:12:47.623] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 12:12:47.625] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 12:12:47.625] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_request + Payload: {"method":1001,"id":7} +[2026-05-03 12:12:47.626] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_response +[2026-05-03 12:12:47.627] [info] [api_printer.cpp:2104] [2275] add host task 1001 +[2026-05-03 12:12:47.628] [info] [api_printer.cpp:2058] [2173] process_request1001 +[2026-05-03 12:12:47.628] [info] [api_printer.cpp:601] [2173] handle_get_system_info +[2026-05-03 12:12:47.629] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_response +[2026-05-03 12:12:47.714] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_request + Payload: {"method":1045,"params":{"storage_media":"local","file_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode"},"id":8} +[2026-05-03 12:12:47.715] [info] [api_printer.cpp:2104] [2275] add host task 1045 +[2026-05-03 12:12:47.716] [info] [api_printer.cpp:2058] [2173] process_request1045 +[2026-05-03 12:12:47.716] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_request + Payload: {"method":1042,"id":9} +[2026-05-03 12:12:47.717] [info] [api_printer.cpp:2104] [2275] add host task 1042 +[2026-05-03 12:12:47.719] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_response +[2026-05-03 12:12:47.720] [info] [api_printer.cpp:2058] [2173] process_request1042 +[2026-05-03 12:12:47.721] [info] [device_status.cpp:436] [2173] get monitor video info: {"url":"http://192.168.0.79:8080/?action=stream"} +[2026-05-03 12:12:47.722] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_response +[2026-05-03 12:13:10.689] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:10327.584168822743,last_temp:219.227012873052,temp:219.227012873052,target_temp:220,smoothed_temp:220.0589566078981 +[2026-05-03 12:13:17.758] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_request + Payload: {"type":"PING"} +[2026-05-03 12:13:17.759] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_response +[2026-05-03 12:13:26.863] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 12:13:31.786] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=10394.489998789,time_avg=10364.884398013477,freq=119997846.61318843,diff=63920.712158203125(0.0005326726013183593),stddev=2760.866076367577 +[2026-05-03 12:13:45.383] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:10362.27800000038,last_temp:54.96966522841069,temp:54.96966522841069,target_temp:55,smoothed_temp:55.017313996965406 +[2026-05-03 12:13:45.586] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.18650144267343 last_speed:0.3 -> speed:0.1 +[2026-05-03 12:13:47.820] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_request + Payload: {"type":"PING"} +[2026-05-03 12:13:47.821] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_response +[2026-05-03 12:13:52.250] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:7 +[2026-05-03 12:14:31.848] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:14:53.133] [warning] [mqtt_connector.cpp:503] [2169] Client 0cli9e6a82 has not communicated for a long time, removing it. +[2026-05-03 12:14:53.133] [info] [mqtt_connector.cpp:115] [2169] Unsubscribed from topic: elegoo/F01CFFQQFN55YKS/0cli9e6a82/api_request +[2026-05-03 12:15:10.691] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:10447.586289544755,last_temp:222.06845470295463,temp:222.06845470295463,target_temp:220,smoothed_temp:222.15796357293286 +[2026-05-03 12:15:45.882] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:10482.77800000038,last_temp:54.99736457058685,temp:54.99736457058685,target_temp:55,smoothed_temp:55.001616034335235 +[2026-05-03 12:17:10.693] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:10567.58840092636,last_temp:221.52716080505218,temp:221.52716080505218,target_temp:220,smoothed_temp:220.72901103327055 +[2026-05-03 12:17:46.382] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:10603.27800000038,last_temp:55.049298540062296,temp:55.049298540062296,target_temp:55,smoothed_temp:55.05834116728618 +[2026-05-03 12:17:53.696] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=10656.401211622,half_rtt=0.00016656249954394298,freq=119998272.67013294 +[2026-05-03 12:18:52.777] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:19:10.695] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:10687.59051536568,last_temp:218.59429635141362,temp:218.59429635141362,target_temp:220,smoothed_temp:218.72617085454306 +[2026-05-03 12:19:14.437] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 12:19:35.116] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 12:19:46.882] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:10723.77800000038,last_temp:55.11161546200958,temp:55.11161546200958,target_temp:55,smoothed_temp:55.05830453930419 +[2026-05-03 12:19:47.632] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:8 +[2026-05-03 12:20:14.711] [info] [http_server.cpp:466] [2276] System info retrieved successfully. +[2026-05-03 12:20:14.803] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/api_register + Payload: {"request_id":"0cli0b0fbe","client_id":"0cli0b0fbe"} +[2026-05-03 12:20:14.803] [info] [mqtt_connector.cpp:529] [2275] client_id: 0cli0b0fbe, request_id: 0cli0b0fbe +[2026-05-03 12:20:14.804] [info] [mqtt_connector.cpp:537] [2275] request_topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/register_response +[2026-05-03 12:20:14.804] [info] [mqtt_connector.cpp:554] [2275] subscribe topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_request +[2026-05-03 12:20:14.879] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_request + Payload: {"method":1036,"id":1} +[2026-05-03 12:20:14.880] [info] [api_printer.cpp:2104] [2275] add host task 1036 +[2026-05-03 12:20:14.880] [info] [api_printer.cpp:2058] [2173] process_request1036 +[2026-05-03 12:20:14.880] [info] [device_status.cpp:449] [2173] get history tasks +[2026-05-03 12:20:14.881] [info] [device_status.cpp:458] [2173] Total tasks: 2 +[2026-05-03 12:20:14.882] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_response +[2026-05-03 12:20:14.888] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_request + Payload: {"method":2005,"id":2} +[2026-05-03 12:20:14.888] [info] [api_printer.cpp:2104] [2275] add host task 2005 +[2026-05-03 12:20:14.889] [info] [api_printer.cpp:2058] [2173] process_request2005 +[2026-05-03 12:20:14.891] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_response +[2026-05-03 12:20:14.897] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_request + Payload: {"method":1044,"params":{"storage_media":"local","offset":0,"limit":20},"id":3} +[2026-05-03 12:20:14.899] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 12:20:14.899] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 12:20:14.900] [info] [record_manager.cpp:782] [2173] Getting local files details, total: 11 +[2026-05-03 12:20:14.907] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_request + Payload: {"method":1002,"id":4} +[2026-05-03 12:20:14.908] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 12:20:14.908] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_response +[2026-05-03 12:20:14.911] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 12:20:14.911] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 12:20:14.913] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_response +[2026-05-03 12:20:15.266] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_request + Payload: {"method":1002,"id":5} +[2026-05-03 12:20:15.267] [info] [api_printer.cpp:2104] [2275] add host task 1002 +[2026-05-03 12:20:15.267] [info] [api_printer.cpp:2058] [2173] process_request1002 +[2026-05-03 12:20:15.267] [info] [api_printer.cpp:610] [2173] handle_get_base_info +[2026-05-03 12:20:15.268] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_request + Payload: {"method":1044,"params":{"storage_media":"u-disk","dir":"/","offset":0,"limit":20},"id":6} +[2026-05-03 12:20:15.269] [info] [api_printer.cpp:2104] [2275] add host task 1044 +[2026-05-03 12:20:15.271] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_response +[2026-05-03 12:20:15.272] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_request + Payload: {"method":1001,"id":7} +[2026-05-03 12:20:15.273] [info] [api_printer.cpp:2104] [2275] add host task 1001 +[2026-05-03 12:20:15.275] [info] [api_printer.cpp:2058] [2173] process_request1044 +[2026-05-03 12:20:15.276] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_response +[2026-05-03 12:20:15.276] [info] [api_printer.cpp:2058] [2173] process_request1001 +[2026-05-03 12:20:15.276] [info] [api_printer.cpp:601] [2173] handle_get_system_info +[2026-05-03 12:20:15.278] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_response +[2026-05-03 12:20:15.357] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_request + Payload: {"method":1045,"params":{"storage_media":"local","file_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode"},"id":8} +[2026-05-03 12:20:15.358] [info] [api_printer.cpp:2104] [2275] add host task 1045 +[2026-05-03 12:20:15.359] [info] [api_printer.cpp:2058] [2173] process_request1045 +[2026-05-03 12:20:15.361] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_response +[2026-05-03 12:20:15.362] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_request + Payload: {"method":1042,"id":9} +[2026-05-03 12:20:15.363] [info] [api_printer.cpp:2104] [2275] add host task 1042 +[2026-05-03 12:20:15.364] [info] [api_printer.cpp:2058] [2173] process_request1042 +[2026-05-03 12:20:15.365] [info] [device_status.cpp:436] [2173] get monitor video info: {"url":"http://192.168.0.79:8080/?action=stream"} +[2026-05-03 12:20:15.366] [info] [mqtt_connector.cpp:486] [2173] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_response +[2026-05-03 12:20:28.291] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:20:45.443] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_request + Payload: {"type":"PING"} +[2026-05-03 12:20:45.444] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_response +[2026-05-03 12:20:56.851] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=10839.555134543001,time_avg=10810.013716284559,freq=119998262.1700024,diff=69296.90869140625(0.000577474239095052),stddev=1977.7480340599152 +[2026-05-03 12:21:10.697] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:10807.59262856783,last_temp:219.96088764008988,temp:219.96088764008988,target_temp:220,smoothed_temp:220.76650408274793 +[2026-05-03 12:21:15.523] [info] [mqtt_connector.cpp:165] [2275] Message arrived: + Topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_request + Payload: {"type":"PING"} +[2026-05-03 12:21:15.523] [info] [mqtt_connector.cpp:486] [2275] Publishing to topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_response +[2026-05-03 12:21:26.387] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:21:39.766] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 12:21:47.382] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:10844.27800000038,last_temp:55.05622284690992,temp:55.05622284690992,target_temp:55,smoothed_temp:55.054610472776915 +[2026-05-03 12:22:04.787] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 12:22:33.133] [warning] [mqtt_connector.cpp:503] [2167] Client 0cli0b0fbe has not communicated for a long time, removing it. +[2026-05-03 12:22:33.133] [info] [mqtt_connector.cpp:115] [2167] Unsubscribed from topic: elegoo/F01CFFQQFN55YKS/0cli0b0fbe/api_request +[2026-05-03 12:23:10.699] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:10927.59474353777,last_temp:222.54467184049065,temp:222.54467184049065,target_temp:220,smoothed_temp:222.1939595120092 +[2026-05-03 12:23:26.519] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:23:47.882] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:10964.77800000038,last_temp:54.95581523167613,temp:54.95581523167613,target_temp:55,smoothed_temp:54.97039888353133 +[2026-05-03 12:24:24.033] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:9 +[2026-05-03 12:24:47.337] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 12:25:10.701] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:11047.596843929708,last_temp:221.14174837313772,temp:221.14174837313772,target_temp:220,smoothed_temp:220.32085932453467 +[2026-05-03 12:25:27.624] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=11110.329207506,half_rtt=0.00016362499991373625,freq=119998258.14943299 +[2026-05-03 12:25:48.382] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:11085.27800000038,last_temp:54.962740257367386,temp:54.962740257367386,target_temp:55,smoothed_temp:54.92807171004526 +[2026-05-03 12:26:14.884] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:26:15.868] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:27:07.075] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:27:08.058] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:27:10.703] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:11167.598953962392,last_temp:218.5157060091118,temp:218.5157060091118,target_temp:220,smoothed_temp:218.70265821328758 +[2026-05-03 12:27:11.015] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 12:27:22.834] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=11225.537063394,time_avg=11195.996516557067,freq=119997879.19188055,diff=106029.42944335938(0.0008835785786946614),stddev=4340.04600247966 +[2026-05-03 12:27:48.882] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:11205.77800000038,last_temp:54.973127693509355,temp:54.973127693509355,target_temp:55,smoothed_temp:54.97298061277448 +[2026-05-03 12:28:13.116] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:10 +[2026-05-03 12:28:49.482] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:29:10.706] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:11287.601094791906,last_temp:220.02808264076316,temp:220.02808264076316,target_temp:220,smoothed_temp:220.82063765446415 +[2026-05-03 12:29:18.038] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 12:29:45.618] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 12:29:49.382] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:11326.27800000038,last_temp:55.063147102133314,temp:55.063147102133314,target_temp:55,smoothed_temp:55.033327578199945 +[2026-05-03 12:30:06.290] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:30:10.228] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:31:10.707] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:11407.603220786094,last_temp:222.5306072983164,temp:222.5306072983164,target_temp:220,smoothed_temp:222.3224269284145 +[2026-05-03 12:31:41.587] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:11 +[2026-05-03 12:31:49.882] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:11446.77800000038,last_temp:54.85885900836172,temp:54.85885900836172,target_temp:55,smoothed_temp:54.93742122974852 +[2026-05-03 12:31:55.739] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.039376689400626 last_speed:0.1 -> speed:0.2 +[2026-05-03 12:32:50.744] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 12:33:10.710] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:11527.60534131135,last_temp:220.96370615313634,temp:220.96370615313634,target_temp:220,smoothed_temp:220.19039418738245 +[2026-05-03 12:33:50.382] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:11567.27800000038,last_temp:54.8830991061314,temp:54.8830991061314,target_temp:55,smoothed_temp:54.91814953943063 +[2026-05-03 12:33:52.453] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 12:34:15.765] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.08878702430951 last_speed:0.2 -> speed:0.1 +[2026-05-03 12:34:20.368] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:35:10.712] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:11647.607456478205,last_temp:218.47645205289905,temp:218.47645205289905,target_temp:220,smoothed_temp:218.74878747422025 +[2026-05-03 12:35:48.991] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:35:50.882] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:11687.77800000038,last_temp:55.01121391961385,temp:55.01121391961385,target_temp:55,smoothed_temp:55.00400892389516 +[2026-05-03 12:35:51.943] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:35:56.868] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=11739.572444347,time_avg=11710.031249499349,freq=119998274.5937286,diff=113737.84521484375(0.0009478153767903646),stddev=1737.9906140776975 +[2026-05-03 12:36:12.274] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:12 +[2026-05-03 12:36:14.594] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:36:49.048] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:37:10.715] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:11767.60956132528,last_temp:219.7062792510689,temp:219.7062792510689,target_temp:220,smoothed_temp:220.47767145375985 +[2026-05-03 12:37:51.382] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:11808.27800000038,last_temp:54.93503982447248,temp:54.93503982447248,target_temp:55,smoothed_temp:54.961542841301934 +[2026-05-03 12:38:09.812] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:38:26.585] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=11889.289585960001,time_avg=11859.711162505517,freq=119998277.19108741,diff=81606.82495117188(0.000680056874593099),stddev=2502.7990571374967 +[2026-05-03 12:38:28.576] [info] [clocksync.cpp:206] [2162] mcu 'mcu': New minimum RTT: sent_time=11891.281524503,half_rtt=7.541650029452285e-05,freq=24000000.16628361 +[2026-05-03 12:38:55.819] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.051424659337556 last_speed:0.1 -> speed:0.2 +[2026-05-03 12:39:10.717] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:11887.611659014983,last_temp:222.26405229693034,temp:222.26405229693034,target_temp:220,smoothed_temp:222.2382629023134 +[2026-05-03 12:39:14.851] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:39:38.491] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:39:44.151] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:13 +[2026-05-03 12:39:51.883] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:11928.77800000038,last_temp:55.09776761171662,temp:55.09776761171662,target_temp:55,smoothed_temp:55.07837109852391 +[2026-05-03 12:41:09.082] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:41:10.718] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:12007.613777814904,last_temp:221.80409207451123,temp:221.80409207451123,target_temp:220,smoothed_temp:220.98399830017897 +[2026-05-03 12:41:15.844] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.62441494980743 last_speed:0.2 -> speed:0.1 +[2026-05-03 12:41:52.383] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:12049.27800000038,last_temp:55.01121391961385,temp:55.01121391961385,target_temp:55,smoothed_temp:55.05662166041826 +[2026-05-03 12:42:27.856] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 12:42:55.841] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.11564436668601 last_speed:0.1 -> speed:0.2 +[2026-05-03 12:42:57.545] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:14 +[2026-05-03 12:43:10.720] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:12127.615871507434,last_temp:218.85706170122677,temp:218.85706170122677,target_temp:220,smoothed_temp:218.82045862083226 +[2026-05-03 12:43:31.867] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:43:36.789] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:43:52.882] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:12169.77800000038,last_temp:54.962740257367386,temp:54.962740257367386,target_temp:55,smoothed_temp:54.96098803144254 +[2026-05-03 12:44:25.847] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.71326408452495 last_speed:0.2 -> speed:0.1 +[2026-05-03 12:45:10.723] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:12247.617977168298,last_temp:219.34644587911617,temp:219.34644587911617,target_temp:220,smoothed_temp:220.1964101076005 +[2026-05-03 12:45:15.849] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.00723827995222 last_speed:0.1 -> speed:0.2 +[2026-05-03 12:45:26.123] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:45:29.164] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 12:45:45.851] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.97106429260401 last_speed:0.2 -> speed:0.1 +[2026-05-03 12:45:53.382] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:12290.27800000038,last_temp:55.066609210455795,temp:55.066609210455795,target_temp:55,smoothed_temp:55.06966423726256 +[2026-05-03 12:45:55.674] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:46:03.184] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 12:46:15.851] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.09558223544644 last_speed:0.1 -> speed:0.2 +[2026-05-03 12:46:15.947] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:15 +[2026-05-03 12:47:10.725] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:12367.620081199171,last_temp:221.9987641601187,temp:221.9987641601187,target_temp:220,smoothed_temp:222.15568583853792 +[2026-05-03 12:47:35.861] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.78183912095375 last_speed:0.2 -> speed:0.1 +[2026-05-03 12:47:45.017] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:47:53.882] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:12410.77800000038,last_temp:55.063147102133314,temp:55.063147102133314,target_temp:55,smoothed_temp:55.06261075263942 +[2026-05-03 12:48:55.884] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.09959513579804 last_speed:0.1 -> speed:0.2 +[2026-05-03 12:48:58.145] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:16 +[2026-05-03 12:48:58.166] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 12:49:10.726] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:12487.622187435387,last_temp:222.3200634392528,temp:222.3200634392528,target_temp:220,smoothed_temp:221.45877707597577 +[2026-05-03 12:49:47.138] [info] [clocksync.cpp:219] [2162] mcu 'mcu': Ignoring clock sample: sent_time=12569.842684535,time_avg=12540.296144486447,freq=23999998.324216735,diff=12810.000366210938(0.0005337500152587891),stddev=652.1463982500827 +[2026-05-03 12:49:54.382] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:12531.27800000038,last_temp:55.05622284690992,temp:55.05622284690992,target_temp:55,smoothed_temp:55.01812955957316 +[2026-05-03 12:50:11.749] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:50:15.889] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.78587075387935 last_speed:0.2 -> speed:0.1 +[2026-05-03 12:50:25.394] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 12:50:36.364] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:51:10.729] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:12607.624273600915,last_temp:219.30660660407483,temp:219.30660660407483,target_temp:220,smoothed_temp:219.04440923436485 +[2026-05-03 12:51:17.733] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=12660.438200661,half_rtt=0.0002507500003048335,freq=119997893.3760139 +[2026-05-03 12:51:35.115] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:17 +[2026-05-03 12:51:44.313] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 12:51:45.893] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.039376689400626 last_speed:0.1 -> speed:0.2 +[2026-05-03 12:51:54.882] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:12651.77800000038,last_temp:54.99390219994547,temp:54.99390219994547,target_temp:55,smoothed_temp:54.982449353557314 +[2026-05-03 12:52:13.674] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 12:52:32.570] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:52:40.465] [info] [clocksync.cpp:206] [2164] mcu 'bed_sensor': New minimum RTT: sent_time=12743.170402534,half_rtt=0.00015810399963811506,freq=119998309.33323857 +[2026-05-03 12:52:55.897] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.74554347028612 last_speed:0.2 -> speed:0.1 +[2026-05-03 12:53:10.731] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:12727.626373879622,last_temp:218.9757087143886,temp:218.9757087143886,target_temp:220,smoothed_temp:219.77131591805764 +[2026-05-03 12:53:55.382] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:12772.27800000038,last_temp:54.84847017804111,temp:54.84847017804111,target_temp:55,smoothed_temp:54.886835587089166 +[2026-05-03 12:54:14.132] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:18 +[2026-05-03 12:54:57.323] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:55:10.733] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:12847.62849056137,last_temp:221.55479224095689,temp:221.55479224095689,target_temp:220,smoothed_temp:221.79721124512477 +[2026-05-03 12:55:55.882] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:12892.77800000038,last_temp:54.928114577947156,temp:54.928114577947156,target_temp:55,smoothed_temp:54.93613098198942 +[2026-05-03 12:56:21.018] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:56:31.856] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:56:37.766] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=12980.470633231,time_avg=12950.927617997253,freq=119997885.53993881,diff=65832.05615234375(0.0005486004679361979),stddev=3724.619384625438 +[2026-05-03 12:56:47.618] [info] [clocksync.cpp:206] [2162] mcu 'mcu': New minimum RTT: sent_time=12990.324612444,half_rtt=7.283300055860309e-05,freq=23999999.022118445 +[2026-05-03 12:56:53.012] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:19 +[2026-05-03 12:57:10.734] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:12967.630610912633,last_temp:222.37613084715355,temp:222.37613084715355,target_temp:220,smoothed_temp:221.6453688477842 +[2026-05-03 12:57:27.987] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:57:50.633] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=13053.338160182,half_rtt=0.0002508959996703197,freq=119997882.48617926 +[2026-05-03 12:57:56.382] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:13013.27800000038,last_temp:55.00082692784645,temp:55.00082692784645,target_temp:55,smoothed_temp:54.9677275206615 +[2026-05-03 12:58:42.883] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 12:58:45.885] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 12:59:10.737] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:13087.632705987437,last_temp:220.51428194322716,temp:220.51428194322716,target_temp:220,smoothed_temp:219.87310083731668 +[2026-05-03 12:59:17.296] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 12:59:31.307] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:20 +[2026-05-03 12:59:56.882] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:13133.77800000038,last_temp:54.924651933785015,temp:54.924651933785015,target_temp:55,smoothed_temp:54.96043448170785 +[2026-05-03 13:00:16.403] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 13:01:05.995] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.06748528700274 last_speed:0.1 -> speed:0.2 +[2026-05-03 13:01:10.738] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:13207.634839910503,last_temp:218.5418905680799,temp:218.5418905680799,target_temp:220,smoothed_temp:219.12862928275584 +[2026-05-03 13:01:11.570] [info] [clocksync.cpp:206] [2162] mcu 'mcu': New minimum RTT: sent_time=13254.275627236,half_rtt=6.96460001563537e-05,freq=23999999.001163438 +[2026-05-03 13:01:14.524] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 13:01:43.084] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 13:01:57.381] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:13254.27800000038,last_temp:55.052760699953126,temp:55.052760699953126,target_temp:55,smoothed_temp:55.049073193837145 +[2026-05-03 13:01:58.836] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 13:02:05.999] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.741509401628605 last_speed:0.2 -> speed:0.1 +[2026-05-03 13:02:09.165] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:21 +[2026-05-03 13:02:33.294] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 13:03:10.741] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:13327.636945478007,last_temp:220.86807154583755,temp:220.86807154583755,target_temp:220,smoothed_temp:221.37287676243898 +[2026-05-03 13:03:57.881] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:13374.77800000038,last_temp:55.063147102133314,temp:55.063147102133314,target_temp:55,smoothed_temp:55.06255846384961 +[2026-05-03 13:04:29.472] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 13:04:44.383] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:22 +[2026-05-03 13:05:06.885] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 13:05:10.742] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:13447.639086215091,last_temp:222.51654630037808,temp:222.51654630037808,target_temp:220,smoothed_temp:221.94418976930731 +[2026-05-03 13:05:20.668] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 13:05:36.424] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 13:05:58.381] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:13495.27800000038,last_temp:54.90733850285852,temp:54.90733850285852,target_temp:55,smoothed_temp:54.90482799317236 +[2026-05-03 13:06:06.016] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.03536022297811 last_speed:0.1 -> speed:0.2 +[2026-05-03 13:06:21.727] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 13:07:10.744] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:13567.641209184798,last_temp:220.01463718948696,temp:220.01463718948696,target_temp:220,smoothed_temp:219.47693615294554 +[2026-05-03 13:07:15.849] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:23 +[2026-05-03 13:07:26.019] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.826173723144734 last_speed:0.2 -> speed:0.1 +[2026-05-03 13:07:58.881] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:13615.77800000038,last_temp:54.86232192275753,temp:54.86232192275753,target_temp:55,smoothed_temp:54.90633071832491 +[2026-05-03 13:09:06.025] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.08755572305466 last_speed:0.1 -> speed:0.2 +[2026-05-03 13:09:10.746] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:13687.64332026457,last_temp:218.43722551957404,temp:218.43722551957404,target_temp:220,smoothed_temp:219.07715656294454 +[2026-05-03 13:09:36.810] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 13:09:55.791] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:24 +[2026-05-03 13:09:59.381] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:13736.27800000038,last_temp:54.93503982447248,temp:54.93503982447248,target_temp:55,smoothed_temp:54.89261059844418 +[2026-05-03 13:10:06.027] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.77377512536077 last_speed:0.2 -> speed:0.1 +[2026-05-03 13:10:09.310] [info] [clocksync.cpp:206] [2166] mcu 'toolhead': New minimum RTT: sent_time=13792.016988868,half_rtt=0.00024993749957502587,freq=119997872.42685199 +[2026-05-03 13:10:22.137] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 13:10:29.029] [info] [clocksync.cpp:219] [2164] mcu 'bed_sensor': Ignoring clock sample: sent_time=13811.735011752,time_avg=13782.171562941669,freq=119998303.9555033,diff=85907.2724609375(0.0007158939371744792),stddev=2318.6065040874805 +[2026-05-03 13:10:29.030] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=13811.735221084999,time_avg=13782.172297088997,freq=119997865.83153066,diff=72966.94555664062(0.0006080578796386719),stddev=2622.444446281526 +[2026-05-03 13:11:10.748] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:13807.645454046948,last_temp:220.73173371646197,temp:220.73173371646197,target_temp:220,smoothed_temp:221.29958632535102 +[2026-05-03 13:11:37.962] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 13:11:46.030] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.055440173127806 last_speed:0.1 -> speed:0.2 +[2026-05-03 13:11:59.881] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:13856.77800000038,last_temp:54.90733850285852,temp:54.90733850285852,target_temp:55,smoothed_temp:54.95848859784451 +[2026-05-03 13:12:03.388] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 13:12:23.005] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:25 +[2026-05-03 13:12:45.900] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 13:13:10.750] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:13927.647575064193,last_temp:222.3200634392528,temp:222.3200634392528,target_temp:220,smoothed_temp:221.9178206642021 +[2026-05-03 13:13:15.436] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 13:13:16.036] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.66481564688411 last_speed:0.2 -> speed:0.1 +[2026-05-03 13:14:00.381] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:13977.27800000038,last_temp:54.99043981589415,temp:54.99043981589415,target_temp:55,smoothed_temp:55.022229428989895 +[2026-05-03 13:14:11.583] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 13:14:55.388] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:26 +[2026-05-03 13:15:10.753] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:14047.649721012906,last_temp:220.93636528792962,temp:220.93636528792962,target_temp:220,smoothed_temp:220.2850268880911 +[2026-05-03 13:16:00.880] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:14097.77800000038,last_temp:54.910801217152766,temp:54.910801217152766,target_temp:55,smoothed_temp:54.93543311598249 +[2026-05-03 13:16:46.049] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.12366756088397 last_speed:0.1 -> speed:0.2 +[2026-05-03 13:17:05.907] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 13:17:10.754] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:14167.65183138038,last_temp:218.47645205289905,temp:218.47645205289905,target_temp:220,smoothed_temp:218.90629399271282 +[2026-05-03 13:17:34.456] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:27 +[2026-05-03 13:18:01.380] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:14218.27800000038,last_temp:55.052760699953126,temp:55.052760699953126,target_temp:55,smoothed_temp:55.05150486968176 +[2026-05-03 13:18:20.739] [info] [clocksync.cpp:206] [2162] mcu 'mcu': New minimum RTT: sent_time=14283.44672631,half_rtt=6.508349997602636e-05,freq=23999998.980469666 +[2026-05-03 13:18:22.712] [info] [clocksync.cpp:219] [2166] mcu 'toolhead': Ignoring clock sample: sent_time=14285.417909685999,time_avg=14255.8621910959,freq=119997871.71708125,diff=80934.56762695312(0.0006744547302246094),stddev=1768.6664286370467 +[2026-05-03 13:18:26.060] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.6324970569994 last_speed:0.2 -> speed:0.1 +[2026-05-03 13:19:10.756] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:14287.653961882355,last_temp:220.01463718948696,temp:220.01463718948696,target_temp:220,smoothed_temp:220.7410010502074 +[2026-05-03 13:19:36.068] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.01125641642807 last_speed:0.1 -> speed:0.2 +[2026-05-03 13:19:56.069] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:35.99518243690392 last_speed:0.2 -> speed:0.1 +[2026-05-03 13:20:01.880] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:14338.77800000038,last_temp:54.76881806118564,temp:54.76881806118564,target_temp:55,smoothed_temp:54.82108469759946 +[2026-05-03 13:20:03.146] [error] [tmc_uart.cpp:295] [2110] _decode_read error #0 +[2026-05-03 13:20:07.083] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 13:20:19.896] [info] [print_stats.cpp:157] [2110] cmd_M73 current_layer:28 +[2026-05-03 13:21:10.758] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:14407.656099985656,last_temp:222.11031082028114,temp:222.11031082028114,target_temp:220,smoothed_temp:221.67288269359614 +[2026-05-03 13:21:14.040] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 13:22:02.379] [info] [heaters.cpp:423] [2162] __func__:temperature_callback,heater_name:heater_bed,read_time:14459.27800000038,last_temp:54.95581523167613,temp:54.95581523167613,target_temp:55,smoothed_temp:54.96289495298345 +[2026-05-03 13:22:06.097] [info] [cavity_fan.cpp:417] [2110] mode:false cur_box_temp:36.03134351820631 last_speed:0.1 -> speed:0.2 +[2026-05-03 13:22:13.801] [info] [pause_resume.cpp:273] [2110] send_pause_command +[2026-05-03 13:22:13.801] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"2501"} +[2026-05-03 13:22:13.801] [info] [virtual_sdcard.cpp:966] [2110] do_pause +[2026-05-03 13:22:13.801] [info] [pause_resume.cpp:276] [2110] send_pause_command over +[2026-05-03 13:22:13.801] [info] [device_status.cpp:989] [2117] M2202 result_code:2501 +[2026-05-03 13:22:13.803] [info] [gcode_move.cpp:738] [2110] cmd_SAVE_GCODE_STATE : 738___ ok +[2026-05-03 13:22:13.804] [info] [pause_resume.cpp:242] [2110] __func__:save_state #1 state_name:PAUSE_STATE_1 fan_speed:1 box_fan_speed:0.2 0.698039 +[2026-05-03 13:22:13.901] [info] [virtual_sdcard.cpp:1709] [2110] Exiting SD card print (position 2892057) +[2026-05-03 13:22:13.902] [info] [print_stats.cpp:109] [2110] note_pause state paused +[2026-05-03 13:22:13.902] [info] [idle_timeout.cpp:138] [2110] handle_print_state print_state:paused +[2026-05-03 13:22:16.485] [info] [gcode_move.cpp:738] [2110] cmd_SAVE_GCODE_STATE : 738___ ok +[2026-05-03 13:22:16.487] [info] [pause_resume.cpp:242] [2110] __func__:save_state #1 state_name:PAUSE_STATE_2 fan_speed:1 box_fan_speed:0.2 0.698039 +[2026-05-03 13:22:16.488] [info] [pause_resume.cpp:319] [2110] cmd_PAUSE is_goto_waste_box:1 +[2026-05-03 13:22:16.489] [info] [gcode_move.cpp:52] [2110] G180 select 800 +[2026-05-03 13:22:16.490] [info] [gcode.cpp:1006] [2110] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=221.12803095971046 +[2026-05-03 13:22:16.490] [info] [gcode.cpp:1102] [2110] cmd_SET_CONDITION is_ingore = true +[2026-05-03 13:22:16.491] [info] [gcode.cpp:1123] [2110] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 13:22:17.527] [info] [gcode_move.cpp:738] [2110] cmd_SAVE_GCODE_STATE : 738___ ok +[2026-05-03 13:22:17.528] [info] [pause_resume.cpp:242] [2110] __func__:save_state #1 state_name:PAUSE_STATE_3 fan_speed:0 box_fan_speed:0.2 0 +[2026-05-03 13:22:17.530] [info] [gcode_move.cpp:647] [2110] cmd_M220 speed 50.49999999999999 speed_factor 0.016833333333333332 101 +[2026-05-03 13:22:17.531] [info] [gcode_move.cpp:52] [2110] G180 select 0 +[2026-05-03 13:22:17.531] [info] [gcode.cpp:1940] [2117] update_device_status: {"command":"M2202","result":"2502"} +[2026-05-03 13:22:17.532] [info] [webhooks.cpp:170] [2110] return total: {"id":44,"result":{}} +[2026-05-03 13:22:17.532] [info] [device_status.cpp:989] [2117] M2202 result_code:2502 +[2026-05-03 13:22:17.532] [info] [device_status.cpp:1165] [2117] Stop AI spaghetti detection +[2026-05-03 13:22:17.532] [info] [uds_aicamera_client.cpp:617] [2117] stop_ai_spaghetti_detection called +[2026-05-03 13:22:17.533] [info] [uds_aicamera_client.cpp:374] [2117] Sending UDS request: {"id":7,"method":"ai_detection","params":{"operate":"wire_pause"}} +[2026-05-03 13:22:17.533] [info] [device_status.cpp:1191] [2117] Stop AI foreign object detection +[2026-05-03 13:22:17.535] [info] [uds_aicamera_client.cpp:41] [2178] Received UDS message: {"id":7,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 13:22:17.536] [info] [uds_aicamera_client.cpp:215] [2178] Received UDS message: {"id":7,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 13:22:17.536] [error] [uds_aicamera_client.cpp:217] [2178] Parsing UDS message without 'result': {"id":7,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 13:22:20.994] [warning] [clocksync.cpp:181] [2110] queries_pending 2 +[2026-05-03 13:23:10.759] [info] [heaters.cpp:423] [2166] __func__:temperature_callback,heater_name:extruder,read_time:14527.658262945208,last_temp:220.40587212239257,temp:220.40587212239257,target_temp:220,smoothed_temp:219.9939555973272 +[2026-05-03 13:23:26.972] [error] [tmc_uart.cpp:319] [2110] _decode_read error #1 +[2026-05-03 13:23:49.643] [warning] [por.cpp:211] [2110] trig_shutdonw! +[2026-05-03 13:23:49.644] [info] [virtual_sdcard.cpp:335] [2110] start saving supplement info. +[2026-05-03 13:23:49.649] [info] [config_manager.cpp:350] [2110] save supplement info success +[2026-05-03 13:23:49.703] [info] [config_manager.cpp:486] [2110] save persistent supplement info success +[2026-05-03 13:23:49.705] [info] [virtual_sdcard.cpp:338] [2110] start saving print process data. +[2026-05-03 13:23:49.727] [info] [serialhdl.cpp:502] [2162] mcu 'mcu': got handle_output name: #output message: command_shutdown_pins_set: shutdown shutdown_pins +[2026-05-03 13:23:49.727] [info] [serialhdl.cpp:502] [2162] mcu 'mcu': got handle_output name: #output message: analog_in_shutdown oid 27 ev1 0 ev2 0 st 9 sc 8 +[2026-05-03 13:23:49.728] [info] [serialhdl.cpp:502] [2162] mcu 'mcu': got handle_output name: #output message: analog_in_shutdown oid 34 ev1 0 ev2 0 st 9 sc 8 +[2026-05-03 13:23:49.728] [warning] [serialhdl.cpp:553] [2162] response->len:12,params['clock']:1704690812,params['static_string_id']:19 mcu mcu 'mcu': shutdown! +[2026-05-03 13:23:49.729] [error] [mcu.cpp:1488] [2162] mcu mcu clock32 1704690812 clock64 349597041788 shutdown id 19 msg shutdown_pins +[2026-05-03 13:23:49.743] [info] [virtual_sdcard.cpp:383] [2110] handle_power_outage Save new data during actual printing. +[2026-05-03 13:23:49.744] [info] [virtual_sdcard.cpp:402] [2110] start saving task info. +[2026-05-03 13:23:49.745] [info] [device_ui_message_handle.cpp:779] [2110] Reporting history task: {"id":0,"method":"report_history_task","result":{"begin_time":1777775564,"end_time":1777785829,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":9}} +[2026-05-03 13:23:49.745] [info] [record_manager.cpp:420] [2110] Adding history task to record: id a065d20a-a124-4f32-afca-a3dfb699ae8c name ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode status 9 +[2026-05-03 13:23:49.746] [info] [sql_database.cpp:97] [2110] Insert SQL: INSERT INTO task_record (task_id, task_name, begin_time, end_time, task_status, time_lapse_video_status, time_lapse_video_url, time_lapse_video_size, time_lapse_video_duration, upload_flag, file_create_time) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 13:23:49.798] [info] [virtual_sdcard.cpp:578] [2110] not exist power_outage_file_name +[2026-05-03 13:23:49.804] [info] [virtual_sdcard.cpp:604] [2110] JSON data has been written to power_outage.json +[2026-05-03 13:23:49.805] [warning] [por.cpp:225] [2110] por:power_off handle done +[2026-05-03 21:52:56.977] [info] [logger.cpp:80] [1945] elegoo log init finish! +[2026-05-03 21:52:57.015] [info] [main.cpp:209] [1945] inputtty:./config/printer,gcode_fd:4 +[2026-05-03 21:52:57.122] [info] [main.cpp:226] [1945] Starting Elegoo... +[2026-05-03 21:52:57.122] [info] [main.cpp:228] [1945] start_args.size:17,sizeof(long_options):9 +[2026-05-03 21:52:57.122] [info] [main.cpp:231] [1945] start_args[img_version]:00.00.00.00 +[2026-05-03 21:52:57.122] [info] [main.cpp:231] [1945] start_args[gui_version]:01.01.11.03 +[2026-05-03 21:52:57.122] [info] [main.cpp:231] [1945] start_args[elegoo_version]:03.26.17.07 +[2026-05-03 21:52:57.122] [info] [main.cpp:231] [1945] start_args[camera_version]:00.00.00.00 +[2026-05-03 21:52:57.122] [info] [main.cpp:231] [1945] start_args[canvas_version]:00.00.00.00 +[2026-05-03 21:52:57.123] [info] [main.cpp:231] [1945] start_args[ota_version]:01.03.02.36 +[2026-05-03 21:52:57.123] [info] [main.cpp:231] [1945] start_args[bed_sensor_version]:00.00.00.00 +[2026-05-03 21:52:57.123] [info] [main.cpp:231] [1945] start_args[start_reason]:startup +[2026-05-03 21:52:57.123] [info] [main.cpp:231] [1945] start_args[apiserver]:/tmp/elegoo_uds +[2026-05-03 21:52:57.123] [info] [main.cpp:231] [1945] start_args[toolhead_gd32_version]:00.00.00.00 +[2026-05-03 21:52:57.123] [info] [main.cpp:231] [1945] start_args[autosave_file]:/opt/usr/cfg/autosave.cfg +[2026-05-03 21:52:57.123] [info] [main.cpp:231] [1945] start_args[gcode_fd]:4 +[2026-05-03 21:52:57.123] [info] [main.cpp:231] [1945] start_args[config_file]:/opt/inst/printer_dsp.cfg +[2026-05-03 21:52:57.123] [info] [main.cpp:231] [1945] start_args[cpu_info]:2 core ARMv7 Processor rev 5 (v7l) +[2026-05-03 21:52:57.123] [info] [main.cpp:231] [1945] start_args[mcu_gd32_version]:00.00.00.00 +[2026-05-03 21:52:57.123] [info] [main.cpp:231] [1945] start_args[machine_model]:Centauri Carbon 2 +[2026-05-03 21:52:57.123] [info] [main.cpp:231] [1945] start_args[os_version]:01.02.12.01 +[2026-05-03 21:52:57.124] [info] [main.cpp:236] [1945] long_options[debuginput]:i +[2026-05-03 21:52:57.124] [info] [main.cpp:236] [1945] long_options[input-tty]:I +[2026-05-03 21:52:57.124] [info] [main.cpp:236] [1945] long_options[api-server]:a +[2026-05-03 21:52:57.124] [info] [main.cpp:236] [1945] long_options[logfile]:l +[2026-05-03 21:52:57.124] [info] [main.cpp:236] [1945] long_options[verbose]:v +[2026-05-03 21:52:57.124] [info] [main.cpp:236] [1945] long_options[debugoutput]:o +[2026-05-03 21:52:57.124] [info] [main.cpp:236] [1945] long_options[dictionary]:d +[2026-05-03 21:52:57.124] [info] [main.cpp:236] [1945] long_options[import-test]:t +[2026-05-03 21:52:57.125] [info] [printer.cpp:50] [1945] create Printer success! +[2026-05-03 21:52:57.125] [info] [printer.cpp:366] [1945] connect begin! +[2026-05-03 21:52:57.126] [info] [printer.cpp:284] [1945] read_config begin! +[2026-05-03 21:52:57.133] [info] [gcode.cpp:1927] [1951] create DeviceStatusWorker success!! +[2026-05-03 21:52:57.194] [info] [webhooks.cpp:607] [1945] create WebHooks success! +[2026-05-03 21:52:57.195] [info] [webhooks.cpp:384] [1945] create ServerSocket success! /tmp/elegoo_uds +[2026-05-03 21:52:57.195] [info] [webhooks.cpp:443] [1945] create ServerSocket success! +[2026-05-03 21:52:57.196] [info] [webhooks.cpp:1317] [1953] create DeviceExceptWorker success!! +[2026-05-03 21:52:57.491] [info] [config_manager.cpp:171] [1945] begin read sn info +[2026-05-03 21:52:57.491] [info] [config_manager.cpp:205] [1945] read product auth success, sn: F01CFFQQFN55YKS +[2026-05-03 21:52:57.493] [info] [config_manager.cpp:148] [1945] machine: {"machine":{"model":"Centauri Carbon 2"},"versions":[{"os_version":"01.02.12.01"},{"mcu_gd32_version":"00.00.00.00"},{"toolhead_gd32_version":"00.00.00.00"},{"bed_sensor_version":"00.00.00.00"},{"canvas_version":"00.00.00.00"},{"camera_version":"00.00.00.00"},{"elegoo_version":"03.26.17.07"},{"gui_version":"01.01.11.03"},{"ota_version":"01.03.02.36"},{"img_version":"00.00.00.00"}]} +[2026-05-03 21:52:57.493] [info] [config_manager.cpp:209] [1945] begin read supplement info +[2026-05-03 21:52:57.495] [info] [config_manager.cpp:306] [1945] token info: token: miM2yt, token_switch_enabled: true, is_lan_mode: true, power_outage_resume_enabled: true, region: 1 +[2026-05-03 21:52:57.498] [info] [config_manager.cpp:453] [1945] load persistent supplement info success +[2026-05-03 21:52:57.499] [info] [device_status.cpp:133] [1945] Create component manager for Centauri Carbon 2 +[2026-05-03 21:52:57.617] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_details GROUP BY filename HAVING MAX(create_time)); +[2026-05-03 21:52:57.619] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_thumbnail GROUP BY filename); +[2026-05-03 21:52:57.622] [info] [record_manager.cpp:302] [1945] Loaded 3 tasks from the database. +[2026-05-03 21:52:57.622] [info] [record_manager.cpp:307] [1945] end task info id a065d20a-a124-4f32-afca-a3dfb699ae8c name ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode status 9. +[2026-05-03 21:52:57.622] [info] [record_manager.cpp:311] [1945] PowerOff task saved: id a065d20a-a124-4f32-afca-a3dfb699ae8c name ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 21:52:57.623] [info] [record_manager.cpp:318] [1945] Loaded 11 files from the database. +[2026-05-03 21:52:57.624] [info] [record_manager.cpp:323] [1945] Loaded 3 thumbnails from the database. +[2026-05-03 21:52:57.625] [info] [record_manager.cpp:328] [1945] Loaded 0 delete file records from the database. +[2026-05-03 21:52:57.625] [info] [sql_database.cpp:417] [1945] Loaded exception message: id 4, code 1263 +[2026-05-03 21:52:57.625] [info] [sql_database.cpp:417] [1945] Loaded exception message: id 3, code 1263 +[2026-05-03 21:52:57.625] [info] [sql_database.cpp:417] [1945] Loaded exception message: id 2, code 801 +[2026-05-03 21:52:57.625] [info] [sql_database.cpp:417] [1945] Loaded exception message: id 1, code 801 +[2026-05-03 21:52:57.626] [info] [record_manager.cpp:333] [1945] Loaded 4 exception messages from the database. +[2026-05-03 21:52:57.626] [info] [record_manager.cpp:827] [1945] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 21:52:57.626] [info] [record_manager.cpp:827] [1945] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-03 21:52:57.627] [info] [record_manager.cpp:827] [1945] File exists: /opt/usr/gcode/local/IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 21:52:57.630] [info] [record_manager.cpp:831] [1945] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-03 21:52:57.630] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 21:52:57.644] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 21:52:57.645] [info] [record_manager.cpp:344] [1945] check_db_files file[ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode] not exist system, clear it from database +[2026-05-03 21:52:57.646] [info] [record_manager.cpp:831] [1945] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-03 21:52:57.646] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 21:52:57.658] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 21:52:57.658] [info] [record_manager.cpp:344] [1945] check_db_files file[ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode] not exist system, clear it from database +[2026-05-03 21:52:57.659] [info] [record_manager.cpp:831] [1945] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-03 21:52:57.659] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 21:52:57.672] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 21:52:57.673] [info] [record_manager.cpp:344] [1945] check_db_files file[ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode] not exist system, clear it from database +[2026-05-03 21:52:57.674] [info] [record_manager.cpp:831] [1945] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-03 21:52:57.674] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 21:52:57.686] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 21:52:57.686] [info] [record_manager.cpp:344] [1945] check_db_files file[ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode] not exist system, clear it from database +[2026-05-03 21:52:57.687] [info] [record_manager.cpp:831] [1945] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-03 21:52:57.687] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 21:52:57.699] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 21:52:57.699] [info] [record_manager.cpp:344] [1945] check_db_files file[ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode] not exist system, clear it from database +[2026-05-03 21:52:57.700] [info] [record_manager.cpp:831] [1945] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-03 21:52:57.700] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 21:52:57.713] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 21:52:57.714] [info] [record_manager.cpp:344] [1945] check_db_files file[ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode] not exist system, clear it from database +[2026-05-03 21:52:57.715] [info] [record_manager.cpp:831] [1945] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-03 21:52:57.715] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 21:52:57.727] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 21:52:57.727] [info] [record_manager.cpp:344] [1945] check_db_files file[ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode] not exist system, clear it from database +[2026-05-03 21:52:57.728] [info] [record_manager.cpp:831] [1945] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 21:52:57.728] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 21:52:57.742] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 21:52:57.742] [info] [record_manager.cpp:344] [1945] check_db_files file[ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode] not exist system, clear it from database +[2026-05-03 21:52:57.743] [info] [record_manager.cpp:361] [1945] Local file count 11 does not match cached file details 3, need to parse online files. +[2026-05-03 21:52:57.743] [info] [record_manager.cpp:607] [1945] Parsing local files in /opt/usr/gcode/local/ +[2026-05-03 21:52:57.743] [info] [record_manager.cpp:623] [1945] File ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode already exists in cache, skipping parsing. +[2026-05-03 21:52:57.743] [info] [record_manager.cpp:496] [1945] Parsing local file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-03 21:52:57.743] [error] [record_manager.cpp:32] [1945] stat failed /opt/usr/gcode/local//ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-03 21:52:57.743] [info] [record_manager.cpp:383] [1945] color map size: 0 +[2026-05-03 21:52:57.743] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 21:52:57.757] [info] [record_manager.cpp:512] [1945] Parsed file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 21:52:57.757] [info] [record_manager.cpp:496] [1945] Parsing local file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 21:52:57.758] [error] [record_manager.cpp:32] [1945] stat failed /opt/usr/gcode/local//ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 21:52:57.758] [info] [record_manager.cpp:383] [1945] color map size: 0 +[2026-05-03 21:52:57.758] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 21:52:57.772] [info] [record_manager.cpp:512] [1945] Parsed file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 21:52:57.772] [info] [record_manager.cpp:496] [1945] Parsing local file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-03 21:52:57.773] [error] [record_manager.cpp:32] [1945] stat failed /opt/usr/gcode/local//ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-03 21:52:57.773] [info] [record_manager.cpp:383] [1945] color map size: 0 +[2026-05-03 21:52:57.773] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 21:52:57.784] [info] [record_manager.cpp:512] [1945] Parsed file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 21:52:57.784] [info] [record_manager.cpp:496] [1945] Parsing local file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-03 21:52:57.784] [error] [record_manager.cpp:32] [1945] stat failed /opt/usr/gcode/local//ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-03 21:52:57.785] [info] [record_manager.cpp:383] [1945] color map size: 0 +[2026-05-03 21:52:57.785] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 21:52:57.796] [info] [record_manager.cpp:512] [1945] Parsed file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 21:52:57.796] [info] [record_manager.cpp:496] [1945] Parsing local file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-03 21:52:57.797] [error] [record_manager.cpp:32] [1945] stat failed /opt/usr/gcode/local//ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-03 21:52:57.797] [info] [record_manager.cpp:383] [1945] color map size: 0 +[2026-05-03 21:52:57.797] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 21:52:57.808] [info] [record_manager.cpp:512] [1945] Parsed file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 21:52:57.808] [info] [record_manager.cpp:496] [1945] Parsing local file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-03 21:52:57.808] [error] [record_manager.cpp:32] [1945] stat failed /opt/usr/gcode/local//ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-03 21:52:57.809] [info] [record_manager.cpp:383] [1945] color map size: 0 +[2026-05-03 21:52:57.809] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 21:52:57.822] [info] [record_manager.cpp:512] [1945] Parsed file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 21:52:57.822] [info] [record_manager.cpp:623] [1945] File ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode already exists in cache, skipping parsing. +[2026-05-03 21:52:57.822] [info] [record_manager.cpp:496] [1945] Parsing local file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-03 21:52:57.822] [error] [record_manager.cpp:32] [1945] stat failed /opt/usr/gcode/local//ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-03 21:52:57.822] [info] [record_manager.cpp:383] [1945] color map size: 0 +[2026-05-03 21:52:57.823] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 21:52:57.834] [info] [record_manager.cpp:512] [1945] Parsed file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 21:52:57.834] [info] [record_manager.cpp:623] [1945] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode already exists in cache, skipping parsing. +[2026-05-03 21:52:57.834] [info] [record_manager.cpp:496] [1945] Parsing local file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-03 21:52:57.835] [error] [record_manager.cpp:32] [1945] stat failed /opt/usr/gcode/local//ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-03 21:52:57.835] [info] [record_manager.cpp:383] [1945] color map size: 0 +[2026-05-03 21:52:57.835] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 21:52:57.846] [info] [record_manager.cpp:512] [1945] Parsed file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 21:52:57.846] [info] [record_manager.cpp:636] [1945] Finished parsing local files, total: 11 +[2026-05-03 21:52:57.847] [info] [record_manager.cpp:365] [1945] RecordManager initialized successfully. +[2026-05-03 21:52:57.847] [info] [pins.cpp:112] [1945] create PrinterPins success! +[2026-05-03 21:52:57.878] [info] [msgproto.cpp:606] [1945] create MessageParser success! +[2026-05-03 21:52:57.879] [info] [mcu.cpp:1963] [1945] restart_via_remoterpc +[2026-05-03 21:52:57.879] [error] [serialhdl.cpp:309] [1945] SerialReader::disconnect() +[2026-05-03 21:52:57.879] [info] [dsp_helper.h:31] [1945] remoterpc_ctrl 0 +[2026-05-03 21:52:58.102] [info] [webhooks.cpp:56] [1945] webhooks client 35587076: New connection +[2026-05-03 21:52:58.114] [info] [webhooks.cpp:1232] [1945] handle_query is_subscribe true : {"canvas_dev":["fds","canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[2026-05-03 21:52:58.115] [info] [webhooks.cpp:1232] [1945] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[2026-05-03 21:52:58.116] [info] [device_ui_message_handle.cpp:65] [1945] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[2026-05-03 21:52:58.116] [info] [device_ui_message_handle.cpp:503] [1945] Total tasks: 2 +[2026-05-03 21:52:58.117] [info] [webhooks.cpp:799] [1945] return handle_sync_info: {"history_task_list":[{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":2} +[2026-05-03 21:52:58.118] [info] [webhooks.cpp:170] [1945] return total: {"id":5,"method":"sync_info","result":{"history_task_list":[{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":2}} +[2026-05-03 21:52:58.150] [warning] [webhooks.cpp:148] [1945] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 21:52:58.151] [info] [webhooks.cpp:170] [1945] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":7} +[2026-05-03 21:52:58.152] [info] [webhooks.cpp:170] [1945] return total: {"id":9,"result":{}} +[2026-05-03 21:52:58.153] [warning] [webhooks.cpp:148] [1945] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 21:52:58.154] [info] [webhooks.cpp:170] [1945] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":11} +[2026-05-03 21:52:58.154] [info] [device_ui_message_handle.cpp:255] [1945] Handling bind function request {"script":"get_device_info"} +[2026-05-03 21:52:58.155] [info] [webhooks.cpp:768] [1945] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-05-03 21:52:58.155] [info] [webhooks.cpp:170] [1945] return total: {"id":13,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-05-03 21:52:58.156] [info] [device_ui_message_handle.cpp:65] [1945] Handling sync info request {"region_code":1,"script":"set_region"} +[2026-05-03 21:52:58.157] [info] [device_ui_message_handle.cpp:129] [1945] Handling set region request 1 +[2026-05-03 21:52:58.157] [info] [device_ui_message_handle.cpp:132] [1945] Region is the same as current region: 1 +[2026-05-03 21:52:58.157] [info] [webhooks.cpp:799] [1945] return handle_sync_info: {"script":"set_region"} +[2026-05-03 21:52:58.157] [info] [webhooks.cpp:170] [1945] return total: {"id":15,"method":"sync_info","result":{"script":"set_region"}} +[2026-05-03 21:52:58.164] [info] [webhooks.cpp:170] [1945] return total: {"id":3,"result":{"eventtime":24.302802636,"status":null}} +[2026-05-03 21:52:58.166] [warning] [webhooks.cpp:148] [1945] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 21:52:58.167] [info] [webhooks.cpp:170] [1945] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":6} +[2026-05-03 21:52:58.167] [info] [device_ui_message_handle.cpp:321] [1945] Get Network access cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-03 21:52:58.167] [info] [webhooks.cpp:756] [1945] return handle_get_network_access_cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-03 21:52:58.168] [info] [webhooks.cpp:170] [1945] return total: {"id":10,"method":"get_network_access_cfg","result":{"object":{"lan_status":true,"token":"miM2yt","token_status":true}}} +[2026-05-03 21:52:58.169] [info] [device_ui_message_handle.cpp:65] [1945] Handling sync info request {"script":"get_device_status"} +[2026-05-03 21:52:58.169] [info] [device_ui_message_handle.cpp:143] [1945] Handling get device status request +[2026-05-03 21:52:58.170] [info] [device_ui_message_handle.cpp:154] [1945] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-03 21:52:58.170] [info] [webhooks.cpp:799] [1945] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-03 21:52:58.171] [info] [webhooks.cpp:170] [1945] return total: {"id":14,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[2026-05-03 21:52:58.172] [info] [webhooks.cpp:170] [1945] return total: {"id":4,"result":{"eventtime":24.302802636,"status":null}} +[2026-05-03 21:52:58.619] [warning] [webhooks.cpp:148] [1945] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 21:52:58.619] [info] [webhooks.cpp:170] [1945] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":8} +[2026-05-03 21:52:58.620] [info] [device_ui_message_handle.cpp:65] [1945] Handling sync info request {"script":"set_status","status":1,"sub_status":0} +[2026-05-03 21:52:58.620] [info] [device_ui_message_handle.cpp:553] [1945] Setting status: 1, sub_status: 0 +[2026-05-03 21:52:58.620] [info] [device_status.cpp:1204] [1945] Set UI ready: true +[2026-05-03 21:52:58.620] [info] [webhooks.cpp:799] [1945] return handle_sync_info: {"script":"set_status"} +[2026-05-03 21:52:58.621] [info] [webhooks.cpp:170] [1945] return total: {"id":16,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 21:52:58.880] [info] [dsp_helper.h:31] [1945] remoterpc_ctrl 1 +[2026-05-03 21:52:58.999] [warning] [webhooks.cpp:148] [1945] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 21:52:59.000] [info] [webhooks.cpp:170] [1945] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":12} +[2026-05-03 21:53:00.001] [info] [msgproto.cpp:606] [1945] create MessageParser success! +[2026-05-03 21:53:00.003] [info] [mcu.cpp:1049] [1945] MCU 'bed_sensor' restart power +[2026-05-03 21:53:00.413] [info] [mcu.cpp:1072] [1945] bootloader mode, try jump to app! +[2026-05-03 21:53:00.444] [info] [msgproto.cpp:606] [1945] create MessageParser success! +[2026-05-03 21:53:00.446] [info] [mcu.cpp:1049] [1945] MCU 'toolhead' restart power +[2026-05-03 21:53:00.856] [info] [mcu.cpp:1072] [1945] bootloader mode, try jump to app! +[2026-05-03 21:53:00.997] [info] [bed_mesh.cpp:1466] [1945] zero_ref_pos size 0 +[2026-05-03 21:53:01.110] [info] [bed_mesh.cpp:2722] [1945] ProfileManager profile->get_name bed_mesh +[2026-05-03 21:53:01.111] [info] [bed_mesh.cpp:2722] [1945] ProfileManager profile->get_name bed_mesh ADAPTIVE +[2026-05-03 21:53:01.111] [info] [bed_mesh.cpp:2722] [1945] ProfileManager profile->get_name bed_mesh default +[2026-05-03 21:53:01.116] [info] [gcode_move.cpp:60] [1945] GCodeMove init! +[2026-05-03 21:53:01.156] [info] [gcode_move.cpp:119] [1945] GCodeMove init success!! +[2026-05-03 21:53:01.157] [info] [gcode_move.cpp:274] [1945] set_move_transform transform: force:false +[2026-05-03 21:53:01.194] [info] [print_stats.cpp:26] [1945] PrintStats init! +[2026-05-03 21:53:01.196] [info] [print_stats.cpp:55] [1945] PrintStats init success!! +[2026-05-03 21:53:01.196] [info] [bed_mesh.cpp:463] [1945] update_status bed_mesh_exist:0x0100 +[2026-05-03 21:53:01.196] [info] [print_stats.cpp:277] [1945] bed_mesh_exist:0x0100 +[2026-05-03 21:53:01.197] [warning] [extras_factory.cpp:323] [1945] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-03 21:53:01.197] [warning] [extras_factory.cpp:323] [1945] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-03 21:53:01.197] [info] [beep_ctrl.cpp:39] [1945] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[2026-05-03 21:53:01.199] [info] [beep_ctrl.cpp:147] [1945] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[2026-05-03 21:53:01.199] [info] [beep_ctrl.cpp:262] [1945] exec_cmd data 0 +[2026-05-03 21:53:01.200] [info] [beep_ctrl.cpp:181] [1945] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[2026-05-03 21:53:01.201] [info] [beep_ctrl.cpp:262] [1945] exec_cmd data 333333 +[2026-05-03 21:53:01.201] [info] [beep_ctrl.cpp:199] [1945] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[2026-05-03 21:53:01.201] [info] [beep_ctrl.cpp:262] [1945] exec_cmd data 166666 +[2026-05-03 21:53:01.201] [info] [beep_ctrl.cpp:217] [1945] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[2026-05-03 21:53:01.203] [info] [beep_ctrl.cpp:262] [1945] exec_cmd data normal +[2026-05-03 21:53:01.235] [info] [query_adc.cpp:36] [1945] QueryADC init success! +[2026-05-03 21:53:01.237] [info] [mmu.cpp:1447] [1945] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[2026-05-03 21:53:01.237] [info] [mmu.cpp:1465] [1945] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[2026-05-03 21:53:01.239] [info] [cavity_fan.cpp:27] [1945] PrinterFanCavity init! +[2026-05-03 21:53:01.240] [info] [cavity_fan.cpp:85] [1945] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[2026-05-03 21:53:01.241] [info] [cavity_fan.cpp:96] [1945] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[2026-05-03 21:53:01.241] [info] [cavity_fan.cpp:104] [1945] temp_drop_det_time 60 5 120 1.5 180 +[2026-05-03 21:53:01.242] [info] [fan.cpp:55] [1945] __func__:Fan #1 str_pin:PD17 +[2026-05-03 21:53:01.243] [info] [cavity_fan.cpp:115] [1945] PrinterFanCavity init success!! +[2026-05-03 21:53:01.244] [info] [stepper_enable.cpp:27] [1945] PrinterStepperEnable init! +[2026-05-03 21:53:01.246] [info] [fan.cpp:55] [1945] __func__:Fan #1 str_pin:PG15 +[2026-05-03 21:53:01.275] [info] [fan.cpp:55] [1945] __func__:Fan #1 str_pin:toolhead:PA8 +[2026-05-03 21:53:01.277] [info] [fan.cpp:55] [1945] __func__:Fan #1 str_pin:PD15 +[2026-05-03 21:53:01.310] [info] [exclude_object.cpp:28] [1945] ExcludeObject init! +[2026-05-03 21:53:01.312] [info] [exclude_object.cpp:79] [1945] ExcludeObject init success! +[2026-05-03 21:53:01.372] [warning] [extras_factory.cpp:323] [1945] create extras: "g180_load_config" failer! +[2026-05-03 21:53:01.375] [info] [heater_bed.cpp:18] [1945] PrinterHeaterBed Init! +[2026-05-03 21:53:01.375] [info] [heaters.cpp:873] [1945] PrinterHeaters init! +[2026-05-03 21:53:01.377] [info] [heaters.cpp:898] [1945] PrinterHeaters init success! +[2026-05-03 21:53:01.391] [info] [heaters.cpp:935] [1945] c->get_name(): thermistor NTC 100K beta 3950 +[2026-05-03 21:53:01.391] [info] [thermistor.cpp:138] [1945] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[2026-05-03 21:53:01.392] [info] [heaters.cpp:935] [1945] c->get_name(): thermistor NTC 100K beta 3950 DSP +[2026-05-03 21:53:01.393] [info] [thermistor.cpp:138] [1945] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[2026-05-03 21:53:01.483] [info] [utilities.cpp:52] [1945] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[2026-05-03 21:53:01.485] [info] [thermistor.cpp:146] [1945] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[2026-05-03 21:53:01.485] [info] [heaters.cpp:935] [1945] c->get_name(): thermistor NTC 100K beta 4300 +[2026-05-03 21:53:01.486] [info] [thermistor.cpp:138] [1945] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[2026-05-03 21:53:01.486] [info] [heaters.cpp:935] [1945] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[2026-05-03 21:53:01.487] [info] [thermistor.cpp:138] [1945] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[2026-05-03 21:53:01.487] [info] [heaters.cpp:935] [1945] c->get_name(): thermistor NTC R25 350 +[2026-05-03 21:53:01.488] [info] [thermistor.cpp:138] [1945] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[2026-05-03 21:53:01.488] [info] [heaters.cpp:943] [1945] PrinterHeaters::load_config success! +[2026-05-03 21:53:01.488] [info] [heaters.cpp:1032] [1945] setup_sensor success! +[2026-05-03 21:53:01.489] [info] [adc_temperature.cpp:29] [1945] __func__:PrinterADCtoTemperature name:heater_bed +[2026-05-03 21:53:01.489] [info] [adc_temperature.cpp:35] [1945] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[2026-05-03 21:53:01.490] [info] [adc_temperature.cpp:165] [1945] name:heater_bed +[2026-05-03 21:53:01.490] [info] [error_mcu.cpp:101] [1945] create PrinterMCUError success! +[2026-05-03 21:53:01.491] [info] [heaters.cpp:83] [1945] Heater init! name: heater_bed +[2026-05-03 21:53:01.492] [info] [heaters.cpp:122] [1945] __func__:Heater,heater_pin:PG13 +[2026-05-03 21:53:01.494] [info] [pid_calibrate.cpp:43] [1945] PIDCalibrate init success!! +[2026-05-03 21:53:01.495] [warning] [heaters.cpp:329] [1945] Heater init success!!!! +[2026-05-03 21:53:01.495] [warning] [heaters.cpp:985] [1945] debug name heater_bed, gcode_id B +[2026-05-03 21:53:01.496] [info] [heater_bed.cpp:41] [1945] PrinterHeaterBed Init success! +[2026-05-03 21:53:01.497] [info] [heater_fan.cpp:24] [1945] PrinterHeaterFan init! +[2026-05-03 21:53:01.497] [info] [fan.cpp:55] [1945] __func__:Fan #1 str_pin:toolhead:PB13 +[2026-05-03 21:53:01.498] [info] [heater_fan.cpp:46] [1945] PrinterHeaterFan init success!! +[2026-05-03 21:53:01.502] [info] [idle_timeout.cpp:28] [1945] init IdleTimeout ... +[2026-05-03 21:53:01.503] [info] [idle_timeout.cpp:72] [1945] init IdleTimeout success !!! +[2026-05-03 21:53:01.642] [info] [bulk_sensor.cpp:312] [1945] unpack_fmt:mqtt_strategy_->is_valid(): true +[2026-05-03 21:53:06.165] [info] [webhooks.cpp:1232] [1945] handle_query is_subscribe true : {"canvas_dev":["fds","canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[2026-05-03 21:53:06.171] [info] [webhooks.cpp:1232] [1945] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[2026-05-03 21:53:06.171] [info] [device_ui_message_handle.cpp:65] [1945] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[2026-05-03 21:53:06.172] [info] [device_ui_message_handle.cpp:503] [1945] Total tasks: 2 +[2026-05-03 21:53:06.173] [info] [webhooks.cpp:799] [1945] return handle_sync_info: {"history_task_list":[{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":2} +[2026-05-03 21:53:06.173] [info] [webhooks.cpp:170] [1945] return total: {"id":19,"method":"sync_info","result":{"history_task_list":[{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":2}} +[2026-05-03 21:53:06.175] [info] [beep_ctrl.cpp:131] [1945] cmd_SET_BEEP_ENABLE beep_enabled false +[2026-05-03 21:53:06.175] [info] [webhooks.cpp:170] [1945] return total: {"id":21,"result":{}} +[2026-05-03 21:53:06.176] [info] [webhooks.cpp:170] [1945] return total: {"id":23,"result":{}} +[2026-05-03 21:53:06.177] [info] [filament_motion_sensor.cpp:146] [1945] CMD_encoder_sensor_switch:true +[2026-05-03 21:53:06.177] [info] [webhooks.cpp:170] [1945] return total: {"id":25,"result":{}} +[2026-05-03 21:53:06.177] [info] [device_ui_message_handle.cpp:255] [1945] Handling bind function request {"script":"get_device_info"} +[2026-05-03 21:53:06.178] [info] [webhooks.cpp:768] [1945] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-05-03 21:53:06.178] [info] [webhooks.cpp:170] [1945] return total: {"id":27,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-05-03 21:53:06.179] [info] [device_ui_message_handle.cpp:65] [1945] Handling sync info request {"region_code":1,"script":"set_region"} +[2026-05-03 21:53:06.179] [info] [device_ui_message_handle.cpp:129] [1945] Handling set region request 1 +[2026-05-03 21:53:06.179] [info] [device_ui_message_handle.cpp:132] [1945] Region is the same as current region: 1 +[2026-05-03 21:53:06.179] [info] [webhooks.cpp:799] [1945] return handle_sync_info: {"script":"set_region"} +[2026-05-03 21:53:06.179] [info] [webhooks.cpp:170] [1945] return total: {"id":29,"method":"sync_info","result":{"script":"set_region"}} +[2026-05-03 21:53:06.181] [info] [filament_switch_sensor.cpp:337] [1945] cmd_SET_FILAMENT_SENSOR:1 +[2026-05-03 21:53:06.181] [info] [webhooks.cpp:170] [1945] return total: {"id":20,"result":{}} +[2026-05-03 21:53:06.181] [info] [device_ui_message_handle.cpp:321] [1945] Get Network access cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-03 21:53:06.182] [info] [webhooks.cpp:756] [1945] return handle_get_network_access_cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-03 21:53:06.182] [info] [webhooks.cpp:170] [1945] return total: {"id":24,"method":"get_network_access_cfg","result":{"object":{"lan_status":true,"token":"miM2yt","token_status":true}}} +[2026-05-03 21:53:06.182] [info] [device_ui_message_handle.cpp:65] [1945] Handling sync info request {"script":"get_device_status"} +[2026-05-03 21:53:06.183] [info] [device_ui_message_handle.cpp:143] [1945] Handling get device status request +[2026-05-03 21:53:06.184] [info] [device_ui_message_handle.cpp:154] [1945] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-03 21:53:06.184] [info] [webhooks.cpp:799] [1945] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-03 21:53:06.184] [info] [webhooks.cpp:170] [1945] return total: {"id":28,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[2026-05-03 21:53:06.191] [info] [output_pin.cpp:189] [1945] cmd_SET_PIN : 189___ +[2026-05-03 21:53:06.191] [info] [output_pin.cpp:200] [1945] cmd_SET_PIN : 200___value:1,scale:1,cfgname:output_pin led_pin +[2026-05-03 21:53:06.191] [info] [mcu.cpp:712] [1945] set_digital pin PB5 7.360615791666667 32.378456515 +[2026-05-03 21:53:06.192] [info] [webhooks.cpp:170] [1945] return total: {"id":22,"result":{}} +[2026-05-03 21:53:06.193] [info] [device_ui_message_handle.cpp:65] [1945] Handling sync info request {"script":"set_status","status":1,"sub_status":0} +[2026-05-03 21:53:06.193] [info] [device_ui_message_handle.cpp:553] [1945] Setting status: 1, sub_status: 0 +[2026-05-03 21:53:06.193] [info] [webhooks.cpp:799] [1945] return handle_sync_info: {"script":"set_status"} +[2026-05-03 21:53:06.194] [info] [webhooks.cpp:170] [1945] return total: {"id":30,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 21:53:06.202] [info] [webhooks.cpp:170] [1945] return total: {"id":26,"result":{}} +[2026-05-03 21:53:06.213] [info] [webhooks.cpp:1232] [1945] handle_query is_subscribe false : {"print_stats":["filename"]} +[2026-05-03 21:53:06.218] [info] [mmu.cpp:2093] [1945] {"command":"CANVAS_SOFTWARE_VERSION","result":"00.00.00.44"} +[2026-05-03 21:53:06.218] [info] [gcode.cpp:1940] [1951] update_device_status: {"command":"CANVAS_SOFTWARE_VERSION","result":"00.00.00.44"} +[2026-05-03 21:53:06.394] [info] [filament_switch_sensor.cpp:368] [1945] _button_handler switch_fila_det true +[2026-05-03 21:53:06.395] [info] [mmu.cpp:2093] [1945] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-03 21:53:06.395] [info] [gcode.cpp:1940] [1951] update_device_status: {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-03 21:53:06.396] [info] [filament_switch_sensor.cpp:247] [1945] name:filament_sensor, note_filament_present is_filament_present true filament_present true sensor_enabled 1 canvas_enabled 1 +[2026-05-03 21:53:06.429] [info] [heaters.cpp:423] [2000] __func__:temperature_callback,heater_name:extruder,read_time:7.41801562427032,last_temp:21.859318954314574,temp:21.859318954314574,target_temp:0,smoothed_temp:21.859318954314574 +[2026-05-03 21:53:06.458] [info] [clocksync.cpp:206] [2000] mcu 'toolhead': New minimum RTT: sent_time=32.643791639999996,half_rtt=0.0002664375000023256,freq=119998763.78397417 +[2026-05-03 21:53:06.596] [info] [webhooks.cpp:170] [1945] return total: {"id":17,"result":{"eventtime":32.757805598,"status":{"canvas_dev":{"canvas_lite":{"channels0":{"cid":0,"filament":{"brand":"0xEEEEEEEE","code":"0x0000","color":"0x000000","date":"2502","detailed_type":"PLA","diameter":"1.75","manufacturer":"Generic","nozzle_max_temp":"230℃","nozzle_min_temp":"190℃","type":"PLA","weight":"1000"},"status":1},"channels1":{"cid":1,"filament":{"brand":"0xEEEEEEEE","code":"0x0000","color":"0xFFFFFF","date":"2502","detailed_type":"PLA","diameter":"1.75","manufacturer":"Generic","nozzle_max_temp":"230℃","nozzle_min_temp":"190℃","type":"PLA","weight":"1000"},"status":1},"channels2":{"cid":2,"filament":{"brand":"","code":"","color":"","date":"","detailed_type":"","diameter":"","manufacturer":"","nozzle_max_temp":"","nozzle_min_temp":"","type":"","weight":""},"status":0},"channels3":{"cid":3,"filament":{"brand":"","code":"","color":"","date":"","detailed_type":"","diameter":"","manufacturer":"","nozzle_max_temp":"","nozzle_min_temp":"","type":"","weight":""},"status":0},"connected":1,"did":0,"extern_channel":{"filament":{"brand":"0xEEEEEEEE","code":"0x0001","color":"0xFFFFFF","date":"","detailed_type":"PLA","diameter":"1.75","manufacturer":"ELEGOO","nozzle_max_temp":"250.0","nozzle_min_temp":"170.0","type":"PLA","weight":"1000"},"status":0}},"fds":{"connected":0,"dragging":0,"fila_in":0}},"cavity_fan":{"rpm":0.0,"speed":0.0},"controller_fan board_cooling_fan":{"rpm":0.0,"speed":0.0},"extruder":{"target":0.0,"temperature":21.86},"fan":{"rpm":0.0,"speed":0.0},"fan_generic fan1":{"rpm":0.0,"speed":0.0},"gcode_move":{"speed":1500.0,"speed_factor":1.0},"heater_bed":{"target":0.0,"temperature":20.83},"heater_fan heatbreak_cooling_fan":{"rpm":0.0,"speed":0.0},"pause_resume":{"is_paused":false},"print_stats":{"auto_plug_in_filament":null,"bed_mesh_detected":256,"beep_enabled":false,"canvas_runout_filament":null,"cavity_temperature_mode":0,"enabled":1,"filament_detected":true,"filename":"local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","info":{"current_layer":0,"total_layer":null},"machine_status":15,"machine_sub_status":0,"print_duration":10028.032665032,"state":"standby","total_duration":10028.032665032},"toolhead":{"homed_axes":""},"virtual_sdcard":{"progress":0.0},"ztemperature_sensor box":{"measured_max_temp":20.89,"measured_min_temp":20.87,"temperature":20.87}}}} +[2026-05-03 21:53:06.598] [info] [webhooks.cpp:170] [1945] return total: {"id":31,"result":{"eventtime":32.757805598,"status":{"print_stats":{"filename":"local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode"}}}} +[2026-05-03 21:53:06.599] [info] [webhooks.cpp:170] [1945] return total: {"id":18,"result":{"eventtime":32.757805598,"status":null}} +[2026-05-03 21:53:06.714] [info] [webhooks.cpp:1232] [1945] handle_query is_subscribe false : {"print_stats":["print_duration_before_power_loss"]} +[2026-05-03 21:53:06.714] [info] [mqtt_connector.cpp:498] [2006] Starting heartbeat monitor thread. +[2026-05-03 21:53:06.714] [info] [timer_manager.cpp:72] [2006] Adding timer task: LanMQTTStrategy_heartbeat_monitor, interval: 20000 ms, repeat: true +[2026-05-03 21:53:06.715] [info] [mqtt_connector.cpp:295] [2006] Subscribed to topic: elegoo/F01CFFQQFN55YKS/api_register +[2026-05-03 21:53:07.084] [info] [webhooks.cpp:170] [1945] return total: {"id":32,"result":{"eventtime":33.257918057,"status":{"print_stats":{"print_duration_before_power_loss":10028.032665032}}}} +[2026-05-03 21:53:07.442] [info] [clocksync.cpp:206] [2000] mcu 'toolhead': New minimum RTT: sent_time=33.627933223999996,half_rtt=0.00025922900000452387,freq=119998002.12333055 +[2026-05-03 21:53:10.695] [info] [gcode.cpp:1940] [1951] update_device_status: {"command":"M2202","result":"2405"} +[2026-05-03 21:53:10.695] [info] [device_status.cpp:989] [1951] M2202 result_code:2405 +[2026-05-03 21:53:11.701] [info] [bed_mesh.cpp:463] [1945] update_status bed_mesh_exist:0x0100 +[2026-05-03 21:53:11.701] [info] [print_stats.cpp:277] [1945] bed_mesh_exist:0x0100 +[2026-05-03 21:53:11.702] [info] [bed_mesh.cpp:638] [1945] execute_calirate_from_slicer 0 +[2026-05-03 21:53:11.703] [info] [mcu.cpp:712] [1945] set_digital pin PE12 13.042090625 37.890226059 +[2026-05-03 21:53:11.703] [info] [stepper_enable.cpp:95] [1945] stepper_z has been manually enabled +[2026-05-03 21:53:11.704] [info] [virtual_sdcard.cpp:1132] [1945] Step 0: configure GCODE file +[2026-05-03 21:53:11.704] [info] [virtual_sdcard.cpp:1027] [1945] _reset_file +[2026-05-03 21:53:11.705] [info] [virtual_sdcard.cpp:966] [1945] do_pause +[2026-05-03 21:53:11.705] [info] [idle_timeout.cpp:138] [1945] handle_print_state print_state:standby +[2026-05-03 21:53:11.705] [info] [virtual_sdcard.cpp:1454] [1945] VirtualSD File opened: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode, Size:3643591 +[2026-05-03 21:53:11.705] [info] [idle_timeout.cpp:138] [1945] handle_print_state print_state:standby +[2026-05-03 21:53:11.706] [info] [print_stats.cpp:157] [1945] cmd_M73 current_layer:28 +[2026-05-03 21:53:11.706] [info] [virtual_sdcard.cpp:1138] [1945] Step 1: heated bed. +[2026-05-03 21:53:11.707] [info] [heater_bed.cpp:57] [1945] cmd_M140 temp 55 wait false +[2026-05-03 21:53:11.707] [info] [verify_heater.cpp:67] [1945] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 21:53:11.707] [info] [verify_heater.cpp:67] [1945] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 21:53:11.707] [info] [heaters.cpp:319] [1945] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 21:53:11.707] [info] [heaters.cpp:1104] [1945] __func__:set_temperature,temp:55,wait:false +[2026-05-03 21:53:11.707] [info] [toolhead.cpp:904] [1945] get_last_move_time +[2026-05-03 21:53:11.708] [info] [virtual_sdcard.cpp:1144] [1945] Step 2: Extruder heating. (-80), current temp:21.706878664082847 T-80:140 +[2026-05-03 21:53:11.709] [info] [gcode.cpp:1940] [1951] update_device_status: {"command":"M2202","result":"1045"} +[2026-05-03 21:53:11.709] [info] [device_status.cpp:989] [1951] M2202 result_code:1045 +[2026-05-03 21:53:11.710] [info] [extruder.cpp:493] [1945] cmd_M104 temp 140 index -1 wait true +[2026-05-03 21:53:11.711] [info] [verify_heater.cpp:67] [1945] verify_heater:reset_fault heater_name extruder +[2026-05-03 21:53:11.711] [info] [verify_heater.cpp:67] [1945] verify_heater:reset_fault heater_name extruder +[2026-05-03 21:53:11.711] [info] [heaters.cpp:319] [1945] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 21:53:11.711] [info] [heaters.cpp:1104] [1945] __func__:set_temperature,temp:140,wait:true +[2026-05-03 21:53:11.711] [info] [toolhead.cpp:904] [1945] get_last_move_time +[2026-05-03 21:53:11.822] [error] [tmc.cpp:359] [1945] TMC stepper_z reports GSTAT: 10000000 reset=1(Reset) +[2026-05-03 21:53:12.029] [info] [verify_heater.cpp:164] [1945] Heater extruder approaching new target of 140 +[2026-05-03 21:53:12.029] [info] [verify_heater.cpp:164] [1945] Heater heater_bed approaching new target of 55 +[2026-05-03 21:53:22.160] [info] [clocksync.cpp:206] [1998] mcu 'bed_sensor': New minimum RTT: sent_time=48.346853689,half_rtt=0.00016893749999979946,freq=119998539.13138735 +[2026-05-03 21:53:31.696] [info] [por.cpp:57] [1945] POR CHARGE DONE! +[2026-05-03 21:53:35.038] [info] [verify_heater.cpp:140] [1945] Heater extruder within range of 140 +[2026-05-03 21:53:40.728] [info] [gcode.cpp:1940] [1951] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-03 21:53:40.728] [info] [device_status.cpp:989] [1951] M2202 result_code:1066 +[2026-05-03 21:53:40.728] [info] [heaters.cpp:1236] [1945] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 21:53:40.728] [info] [virtual_sdcard.cpp:1159] [1945] Step 3: move Z(+5). +[2026-05-03 21:53:40.731] [info] [force_move.cpp:232] [1945] SET_KINEMATIC_POSITION pos=5, 5, 11.68 clear=xy +[2026-05-03 21:53:44.056] [info] [virtual_sdcard.cpp:1179] [1945] Step 4: homing. +[2026-05-03 21:53:44.056] [info] [virtual_sdcard.cpp:1181] [1945] Step 5: move to the waste box. +[2026-05-03 21:53:44.057] [info] [homing_override.cpp:238] [1945] need true true false homed false false true +[2026-05-03 21:53:44.058] [info] [gcode.cpp:1940] [1951] update_device_status: {"command":"M2202","result":"2801"} +[2026-05-03 21:53:44.058] [info] [device_status.cpp:989] [1951] M2202 result_code:2801 +[2026-05-03 21:53:44.058] [info] [homing_override.cpp:261] [1945] cmd_G28 cur_temp:142.5465293844394,safe_home_temp:140 +[2026-05-03 21:53:44.059] [info] [extruder.cpp:493] [1945] cmd_M104 temp 140 index -1 wait false +[2026-05-03 21:53:44.059] [info] [verify_heater.cpp:67] [1945] verify_heater:reset_fault heater_name extruder +[2026-05-03 21:53:44.059] [info] [verify_heater.cpp:67] [1945] verify_heater:reset_fault heater_name extruder +[2026-05-03 21:53:44.060] [info] [heaters.cpp:319] [1945] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 21:53:44.061] [info] [heaters.cpp:1104] [1945] __func__:set_temperature,temp:140,wait:false +[2026-05-03 21:53:44.061] [info] [toolhead.cpp:904] [1945] get_last_move_time +[2026-05-03 21:53:44.062] [info] [homing_override.cpp:166] [1945] homing_ready axis z +[2026-05-03 21:53:44.316] [info] [homing_override.cpp:175] [1945] homing_ready #2: endstop name z state false +[2026-05-03 21:53:44.591] [info] [gcode.cpp:598] [1945] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 21:53:44.867] [info] [gcode.cpp:598] [1945] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-03 21:53:44.869] [info] [gcode_move.cpp:638] [1945] cmd_M114 X:5.000 Y:5.000 Z:21.680 E:0.000 +[2026-05-03 21:53:44.870] [info] [stepper.cpp:573] [1945] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 21:53:44.912] [info] [homing.cpp:152] [1945] kin_spos name stepper_x command_position 390.75 +[2026-05-03 21:53:44.912] [info] [homing.cpp:152] [1945] kin_spos name stepper_y command_position 380.75 +[2026-05-03 21:53:44.912] [info] [homing.cpp:152] [1945] kin_spos name stepper_z command_position 21.68 +[2026-05-03 21:53:45.016] [info] [mcu.cpp:712] [1945] set_digital pin PF6 46.17449125 71.20336795 +[2026-05-03 21:53:45.017] [info] [mcu.cpp:712] [1945] set_digital pin PE15 46.17449125 71.204524158 +[2026-05-03 21:53:45.259] [error] [tmc.cpp:359] [1945] TMC stepper_x reports GSTAT: 10000000 reset=1(Reset) +[2026-05-03 21:53:45.265] [error] [tmc.cpp:359] [1945] TMC stepper_y reports GSTAT: 10000000 reset=1(Reset) +[2026-05-03 21:53:45.269] [info] [mcu.cpp:390] [1992] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 21:53:45.293] [warning] [tmc.cpp:887] [1945] Stepper stepper_x phase change (was 2 now 3) +[2026-05-03 21:53:45.313] [info] [mcu.cpp:634] [1945] home_wait pin_value:1 next_clock:1110205178 +[2026-05-03 21:53:45.313] [info] [homing.cpp:266] [1945] endstop_name x tt 46.25834141666667 trigger_time 46.25834141666667 move_end_print_time 46.51449124999999 +[2026-05-03 21:53:45.313] [info] [homing.cpp:266] [1945] endstop_name x tt 46.25834141666667 trigger_time 46.25834141666667 move_end_print_time 46.51449124999999 +[2026-05-03 21:53:45.314] [info] [homing.cpp:309] [1945] stepper_name stepper_x over_steps 0 halt_pos -332 start_pos 0 trig_pos -332 +[2026-05-03 21:53:45.314] [info] [homing.cpp:309] [1945] stepper_name stepper_y over_steps 0 halt_pos -332 start_pos 0 trig_pos -332 +[2026-05-03 21:53:45.345] [info] [stepper.cpp:573] [1945] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 21:53:45.863] [error] [tmc_uart.cpp:295] [1945] _decode_read error #0 +[2026-05-03 21:53:45.950] [info] [gcode_move.cpp:638] [1945] cmd_M114 X:8.000 Y:5.000 Z:21.680 E:0.000 +[2026-05-03 21:53:45.951] [info] [gcode_move.cpp:638] [1945] cmd_M114 X:8.000 Y:5.000 Z:21.680 E:0.000 +[2026-05-03 21:53:45.952] [info] [stepper.cpp:573] [1945] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 21:53:45.984] [info] [homing.cpp:152] [1945] kin_spos name stepper_x command_position 414 +[2026-05-03 21:53:45.985] [info] [homing.cpp:152] [1945] kin_spos name stepper_y command_position -398 +[2026-05-03 21:53:45.985] [info] [homing.cpp:152] [1945] kin_spos name stepper_z command_position 21.68 +[2026-05-03 21:53:50.695] [info] [mcu.cpp:390] [1992] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 21:53:50.705] [warning] [tmc.cpp:887] [1945] Stepper stepper_y phase change (was 2 now -62) +[2026-05-03 21:53:50.714] [info] [mcu.cpp:634] [1945] home_wait pin_value:1 next_clock:1240426569 +[2026-05-03 21:53:50.715] [info] [homing.cpp:266] [1945] endstop_name y tt 51.68423270833333 trigger_time 51.68423270833333 move_end_print_time 51.93677095833308 +[2026-05-03 21:53:50.716] [info] [homing.cpp:266] [1945] endstop_name y tt 51.68423270833333 trigger_time 51.68423270833333 move_end_print_time 51.93677095833308 +[2026-05-03 21:53:50.716] [info] [homing.cpp:309] [1945] stepper_name stepper_y over_steps 0 halt_pos 21767 start_pos 471 trig_pos 21767 +[2026-05-03 21:53:50.716] [info] [homing.cpp:309] [1945] stepper_name stepper_x over_steps 0 halt_pos -20825 start_pos 471 trig_pos -20825 +[2026-05-03 21:53:50.751] [info] [stepper.cpp:573] [1945] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 21:53:50.761] [info] [clocksync.cpp:206] [2000] mcu 'toolhead': New minimum RTT: sent_time=76.947244786,half_rtt=0.00025612499999994043,freq=119998401.43222558 +[2026-05-03 21:53:51.359] [info] [gcode_move.cpp:638] [1945] cmd_M114 X:8.000 Y:8.000 Z:21.680 E:0.000 +[2026-05-03 21:53:51.360] [info] [gcode_move.cpp:638] [1945] cmd_M114 X:8.000 Y:8.000 Z:21.680 E:0.000 +[2026-05-03 21:53:51.361] [info] [stepper.cpp:573] [1945] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 21:53:51.393] [info] [homing.cpp:152] [1945] kin_spos name stepper_x command_position 393.75 +[2026-05-03 21:53:51.393] [info] [homing.cpp:152] [1945] kin_spos name stepper_y command_position 377.75 +[2026-05-03 21:53:51.394] [info] [homing.cpp:152] [1945] kin_spos name stepper_z command_position 21.68 +[2026-05-03 21:53:51.808] [info] [clocksync.cpp:206] [1992] mcu 'mcu': New minimum RTT: sent_time=77.995262912,half_rtt=8.014550000012832e-05,freq=23999999.528944336 +[2026-05-03 21:53:52.692] [info] [mcu.cpp:390] [1992] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 21:53:52.713] [info] [mcu.cpp:634] [1945] home_wait pin_value:1 next_clock:1288369882 +[2026-05-03 21:53:52.714] [info] [homing.cpp:266] [1945] endstop_name x tt 53.68187075 trigger_time 53.68187075 move_end_print_time 53.93365529166667 +[2026-05-03 21:53:52.714] [info] [homing.cpp:266] [1945] endstop_name x tt 53.68187075 trigger_time 53.68187075 move_end_print_time 53.93365529166667 +[2026-05-03 21:53:52.714] [info] [homing.cpp:309] [1945] stepper_name stepper_x over_steps 0 halt_pos -24891 start_pos -20022 trig_pos -24891 +[2026-05-03 21:53:52.714] [info] [homing.cpp:309] [1945] stepper_name stepper_y over_steps 0 halt_pos 16095 start_pos 20964 trig_pos 16095 +[2026-05-03 21:53:52.747] [info] [stepper.cpp:573] [1945] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 21:53:53.354] [info] [gcode_move.cpp:638] [1945] cmd_M114 X:8.000 Y:8.000 Z:21.680 E:0.000 +[2026-05-03 21:53:53.357] [info] [gcode_move.cpp:638] [1945] cmd_M114 X:8.000 Y:8.000 Z:21.680 E:0.000 +[2026-05-03 21:53:53.357] [info] [stepper.cpp:573] [1945] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 21:53:53.389] [info] [homing.cpp:152] [1945] kin_spos name stepper_x command_position 414 +[2026-05-03 21:53:53.389] [info] [homing.cpp:152] [1945] kin_spos name stepper_y command_position -398 +[2026-05-03 21:53:53.390] [info] [homing.cpp:152] [1945] kin_spos name stepper_z command_position 21.68 +[2026-05-03 21:53:53.841] [info] [mcu.cpp:390] [1992] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-03 21:53:53.862] [info] [mcu.cpp:634] [1945] home_wait pin_value:1 next_clock:1315944844 +[2026-05-03 21:53:53.863] [info] [homing.cpp:266] [1945] endstop_name y tt 54.8308275 trigger_time 54.8308275 move_end_print_time 55.083876 +[2026-05-03 21:53:53.863] [info] [homing.cpp:266] [1945] endstop_name y tt 54.8308275 trigger_time 54.8308275 move_end_print_time 55.083876 +[2026-05-03 21:53:53.863] [info] [homing.cpp:309] [1945] stepper_name stepper_y over_steps 0 halt_pos 17687 start_pos 16898 trig_pos 17687 +[2026-05-03 21:53:53.863] [info] [homing.cpp:309] [1945] stepper_name stepper_x over_steps 0 halt_pos -24877 start_pos -24088 trig_pos -24877 +[2026-05-03 21:53:53.905] [info] [stepper.cpp:573] [1945] set_homing_speed homing_speed 60 speed 60 +[2026-05-03 21:53:53.906] [info] [gcode_move.cpp:638] [1945] cmd_M114 X:8.000 Y:8.000 Z:21.680 E:0.000 +[2026-05-03 21:53:54.448] [info] [gcode.cpp:598] [1945] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 21:53:54.726] [info] [gcode.cpp:598] [1945] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-03 21:53:54.728] [info] [gcode.cpp:1940] [1951] update_device_status: {"command":"M2202","result":"2802"} +[2026-05-03 21:53:54.728] [info] [gcode_move.cpp:52] [1945] G180 select 800 +[2026-05-03 21:53:54.728] [info] [device_status.cpp:989] [1951] M2202 result_code:2802 +[2026-05-03 21:53:54.729] [info] [gcode.cpp:1006] [1945] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=141.6954465027707 +[2026-05-03 21:53:54.729] [info] [gcode.cpp:1102] [1945] cmd_SET_CONDITION is_ingore = true +[2026-05-03 21:53:54.730] [info] [gcode.cpp:1123] [1945] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 21:53:56.170] [info] [virtual_sdcard.cpp:1187] [1945] Step 13: load bed mesh +[2026-05-03 21:53:56.172] [info] [bed_mesh.cpp:2901] [1945] cmd_BED_MESH_PROFILE: from_slicer 0 execute_calirate_from_slicer 0 +[2026-05-03 21:53:56.184] [info] [bed_mesh.cpp:463] [1945] update_status bed_mesh_exist:0x0100 +[2026-05-03 21:53:56.184] [info] [print_stats.cpp:277] [1945] bed_mesh_exist:0x0100 +[2026-05-03 21:53:56.184] [info] [bed_mesh.cpp:2875] [1945] ProfileManager::load_profile default time 0.012056125000000861 +[2026-05-03 21:53:56.186] [info] [virtual_sdcard.cpp:1205] [1945] Step 6: extruder heating. +[2026-05-03 21:53:56.186] [info] [gcode.cpp:1940] [1951] update_device_status: {"command":"M2202","result":"1045"} +[2026-05-03 21:53:56.187] [info] [extruder.cpp:493] [1945] cmd_M104 temp 220 index -1 wait true +[2026-05-03 21:53:56.187] [info] [verify_heater.cpp:67] [1945] verify_heater:reset_fault heater_name extruder +[2026-05-03 21:53:56.187] [info] [verify_heater.cpp:67] [1945] verify_heater:reset_fault heater_name extruder +[2026-05-03 21:53:56.186] [info] [device_status.cpp:989] [1951] M2202 result_code:1045 +[2026-05-03 21:53:56.187] [info] [heaters.cpp:319] [1945] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-03 21:53:56.188] [info] [heaters.cpp:1104] [1945] __func__:set_temperature,temp:220,wait:true +[2026-05-03 21:53:56.188] [info] [toolhead.cpp:904] [1945] get_last_move_time +[2026-05-03 21:53:57.054] [info] [verify_heater.cpp:164] [1945] Heater extruder approaching new target of 220 +[2026-05-03 21:54:18.057] [info] [verify_heater.cpp:140] [1945] Heater extruder within range of 220 +[2026-05-03 21:54:21.197] [info] [gcode.cpp:1940] [1951] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-03 21:54:21.198] [info] [device_status.cpp:989] [1951] M2202 result_code:1066 +[2026-05-03 21:54:21.198] [info] [heaters.cpp:1236] [1945] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 220 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 21:54:21.199] [info] [heater_bed.cpp:57] [1945] cmd_M140 temp 55 wait true +[2026-05-03 21:54:21.199] [info] [verify_heater.cpp:67] [1945] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 21:54:21.199] [info] [verify_heater.cpp:67] [1945] verify_heater:reset_fault heater_name heater_bed +[2026-05-03 21:54:21.199] [info] [heaters.cpp:319] [1945] verify_heater:normal heater_name:heater_bed is_verify_heater_fault false +[2026-05-03 21:54:21.199] [info] [heaters.cpp:1104] [1945] __func__:set_temperature,temp:55,wait:true +[2026-05-03 21:54:21.200] [info] [toolhead.cpp:904] [1945] get_last_move_time +[2026-05-03 21:54:21.202] [info] [gcode.cpp:1940] [1951] update_device_status: {"command":"M2202","result":"1405"} +[2026-05-03 21:54:21.202] [info] [device_status.cpp:989] [1951] M2202 result_code:1405 +[2026-05-03 21:54:36.101] [warning] [clocksync.cpp:181] [1945] queries_pending 2 +[2026-05-03 21:54:57.661] [info] [clocksync.cpp:206] [1998] mcu 'bed_sensor': New minimum RTT: sent_time=143.85771873500002,half_rtt=0.00016685399998550565,freq=119998574.31842864 +[2026-05-03 21:54:59.278] [info] [heaters.cpp:423] [1992] __func__:temperature_callback,heater_name:heater_bed,read_time:120.27800000037998,last_temp:47.925253370318956,temp:47.925253370318956,target_temp:55,smoothed_temp:47.80108637668659 +[2026-05-03 21:55:06.420] [info] [heaters.cpp:423] [2000] __func__:temperature_callback,heater_name:extruder,read_time:127.41946339463958,last_temp:219.1740130798854,temp:219.1740130798854,target_temp:220,smoothed_temp:219.30038035417007 +[2026-05-03 21:55:10.354] [error] [tmc_uart.cpp:295] [1945] _decode_read error #0 +[2026-05-03 21:55:11.085] [info] [verify_heater.cpp:140] [1945] Heater heater_bed within range of 55 +[2026-05-03 21:55:11.228] [info] [gcode.cpp:1940] [1951] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-03 21:55:11.228] [info] [heaters.cpp:1236] [1945] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 55 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-03 21:55:11.228] [info] [device_status.cpp:989] [1951] M2202 result_code:1066 +[2026-05-03 21:55:11.230] [info] [mmu.cpp:4828] [1945] CMD_used_canvas_dev, use canvas 1 +[2026-05-03 21:55:11.230] [info] [virtual_sdcard.cpp:619] [1945] canvas_power_outage_resume printing_used_canvas:1 +[2026-05-03 21:55:11.230] [info] [virtual_sdcard.cpp:625] [1945] canvas_power_outage_resume color_table_size:1 +[2026-05-03 21:55:11.230] [info] [virtual_sdcard.cpp:650] [1945] canvas_power_outage_resume cmd_str:CANVAS_SET_COLOR_TABLE T=0 CHANNEL=0 +[2026-05-03 21:55:11.231] [info] [mmu.cpp:4462] [1945] Configure channel mapping +[2026-05-03 21:55:11.232] [info] [mmu.cpp:4493] [1945] CMD_canvas_set_color_table #1 T_vec.size 1 table_T 0 table_color 0xFF3700 table_channel 0 +[2026-05-03 21:55:11.232] [info] [virtual_sdcard.cpp:656] [1945] canvas_power_outage_resume cmd_str:CANVAS_SWITCH_FILAMENT T=0 SELECT=0 +M400 +[2026-05-03 21:55:11.233] [info] [mmu.cpp:4101] [1945] Execute filament switch process, retry:0 +[2026-05-03 21:55:11.233] [info] [mmu.cpp:4104] [1945] T: 0 +[2026-05-03 21:55:11.233] [info] [mmu.cpp:3820] [1945] get_T_channel channel 0 +[2026-05-03 21:55:11.233] [info] [mmu.cpp:4114] [1945] CMD_canvas_switch_filament channel 0 fila_in[channel] 1 ex_fila_status 1 +[2026-05-03 21:55:11.233] [info] [mmu.cpp:2520] [1945] start extrude channel check. +[2026-05-03 21:55:11.234] [info] [homing_override.cpp:238] [1945] need true true false homed true true true +[2026-05-03 21:55:11.234] [info] [gcode_move.cpp:52] [1945] G180 select 800 +[2026-05-03 21:55:11.235] [info] [gcode.cpp:1006] [1945] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=220.6975283372625 +[2026-05-03 21:55:11.235] [info] [gcode.cpp:1102] [1945] cmd_SET_CONDITION is_ingore = true +[2026-05-03 21:55:11.236] [info] [gcode.cpp:1123] [1945] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 21:55:11.238] [info] [gcode_move.cpp:52] [1945] G180 select 812 +[2026-05-03 21:55:11.248] [info] [mcu.cpp:712] [1945] set_digital pin PB7 132.96773479339353 157.446933241 +[2026-05-03 21:55:11.410] [error] [tmc.cpp:359] [1945] TMC extruder reports GSTAT: 10000000 reset=1(Reset) +[2026-05-03 21:55:21.446] [info] [toolhead.cpp:904] [1945] get_last_move_time +[2026-05-03 21:55:24.700] [info] [gcode_move.cpp:52] [1945] G180 select 818 +[2026-05-03 21:55:24.705] [info] [mmu.cpp:2560] [1945] step 1 : distance 73.82742735936014 +[2026-05-03 21:55:24.705] [info] [mmu.cpp:2560] [1945] step 1 : distance 0 +[2026-05-03 21:55:24.705] [info] [mmu.cpp:2560] [1945] step 1 : distance 0 +[2026-05-03 21:55:24.705] [info] [mmu.cpp:2560] [1945] step 1 : distance 0 +[2026-05-03 21:55:24.705] [info] [mmu.cpp:2636] [1945] extrude channel check result: 0 +[2026-05-03 21:55:24.706] [info] [mmu.cpp:4430] [1945] Extruder filament sensor triggered +[2026-05-03 21:55:24.706] [info] [mmu.cpp:4963] [1945] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 21:55:24.706] [info] [mmu.cpp:4958] [1945] clear_abnormal_feedback #1 __OVER +[2026-05-03 21:55:24.706] [info] [mmu.cpp:4133] [1945] Execute filament switch process complete, channel 0 +[2026-05-03 21:55:28.213] [info] [clocksync.cpp:206] [2000] mcu 'toolhead': New minimum RTT: sent_time=174.412889499,half_rtt=0.00025481250000325417,freq=119998483.21002735 +[2026-05-03 21:55:28.761] [info] [virtual_sdcard.cpp:1252] [1945] Step 7: extrude filament(100). +[2026-05-03 21:55:49.070] [info] [virtual_sdcard.cpp:1259] [1945] Step 8: turn on the fan. +[2026-05-03 21:55:49.072] [info] [toolhead.cpp:904] [1945] get_last_move_time +[2026-05-03 21:55:49.073] [info] [toolhead.cpp:904] [1945] get_last_move_time +[2026-05-03 21:55:49.073] [info] [virtual_sdcard.cpp:1266] [1945] Step 9: set pressure advance. +[2026-05-03 21:55:49.074] [info] [toolhead.cpp:904] [1945] get_last_move_time +[2026-05-03 21:55:49.075] [info] [gcode.cpp:598] [1945] pressure_advance: 0.043000 +pressure_advance_smooth_time: 0.040000 +[2026-05-03 21:55:49.377] [info] [virtual_sdcard.cpp:1278] [1945] Step 10: set input shaper. +[2026-05-03 21:55:49.379] [info] [gcode.cpp:598] [1945] damping_ratio_x:0.100 shaper_freq_x:52.000000 shaper_type_x:zv +[2026-05-03 21:55:49.380] [info] [gcode.cpp:598] [1945] damping_ratio_y:0.100 shaper_freq_y:52.000000 shaper_type_y:zv +[2026-05-03 21:55:49.381] [info] [virtual_sdcard.cpp:1291] [1945] Step 11: set accel. +[2026-05-03 21:55:49.381] [info] [virtual_sdcard.cpp:1294] [1945] Step 12: move X Y to the position before power outage +[2026-05-03 21:55:51.717] [info] [virtual_sdcard.cpp:1299] [1945] Step 14: move z to the position before power outage +[2026-05-03 21:55:59.563] [info] [virtual_sdcard.cpp:1315] [1945] Step 17: set extruder movement mode +[2026-05-03 21:55:59.563] [info] [virtual_sdcard.cpp:1329] [1945] speed_factor 1.3 speed 7681.965 +[2026-05-03 21:55:59.564] [info] [virtual_sdcard.cpp:1339] [1945] Step 18: set extruder position +[2026-05-03 21:55:59.564] [info] [virtual_sdcard.cpp:1343] [1945] Step 19: start printing +[2026-05-03 21:55:59.565] [info] [virtual_sdcard.cpp:979] [1945] do_resume +[2026-05-03 21:55:59.565] [info] [gcode.cpp:1940] [1951] update_device_status: {"command":"M2202","result":"2406"} +[2026-05-03 21:55:59.565] [info] [device_status.cpp:989] [1951] M2202 result_code:2406 +[2026-05-03 21:55:59.569] [info] [device_status.cpp:1995] [1945] refresh print task: id: a065d20a-a124-4f32-afca-a3dfb699ae8c, name: ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode, printer_time: 10743, time lapse: 0 +[2026-05-03 21:55:59.570] [info] [virtual_sdcard.cpp:1365] [1945] File successfully deleted. +[2026-05-03 21:55:59.572] [info] [webhooks.cpp:170] [1945] return total: {"id":33,"result":{}} +[2026-05-03 21:55:59.573] [info] [virtual_sdcard.cpp:1545] [1945] Starting SD card print (position 2892057) +[2026-05-03 21:55:59.574] [info] [print_stats.cpp:90] [1945] note_start state printing +[2026-05-03 21:55:59.575] [info] [mmu.cpp:5026] [1945] get_fila_type connect_status 1 fila_type.size 1 channel_color_table.size:1 +[2026-05-03 21:55:59.576] [info] [cavity_fan.cpp:233] [1945] fila_type: PLA +[2026-05-03 21:55:59.577] [info] [cavity_fan.cpp:268] [1945] cur_box_temp: 21.397674702364725 , fila_box_temp: 40 , is_cooling: false +[2026-05-03 21:55:59.577] [info] [idle_timeout.cpp:138] [1945] handle_print_state print_state:printing +[2026-05-03 21:55:59.578] [info] [virtual_sdcard.cpp:883] [1945] Start chamber temperature detection, must_pause_work false +[2026-05-03 21:55:59.579] [info] [cavity_fan.cpp:417] [1945] mode:false cur_box_temp:21.397674702364725 last_speed:0 -> speed:0.1 +[2026-05-03 21:55:59.597] [info] [servo.cpp:272] [1945] CMD_set_cavity_temperature_mode mode:0 +[2026-05-03 21:55:59.598] [info] [servo.cpp:249] [1945] start grille open check. +[2026-05-03 21:55:59.599] [info] [virtual_sdcard.cpp:900] [1945] chamber temperature detection complete. +[2026-05-03 21:56:05.662] [info] [clocksync.cpp:206] [2000] mcu 'toolhead': New minimum RTT: sent_time=211.86100159999998,half_rtt=0.00025339600000506834,freq=119998494.10006845 +[2026-05-03 21:56:17.475] [info] [clocksync.cpp:206] [1998] mcu 'bed_sensor': New minimum RTT: sent_time=223.673703189,half_rtt=0.00016193749999615648,freq=119998578.42952767 +[2026-05-03 21:56:25.350] [info] [clocksync.cpp:206] [2000] mcu 'toolhead': New minimum RTT: sent_time=231.54760569299998,half_rtt=0.0002528750000152513,freq=119998487.42904256 +[2026-05-03 21:56:47.991] [info] [clocksync.cpp:206] [1998] mcu 'bed_sensor': New minimum RTT: sent_time=254.18803674600002,half_rtt=0.00015929149998328285,freq=119998570.08292812 +[2026-05-03 21:56:57.358] [info] [print_stats.cpp:157] [1945] cmd_M73 current_layer:29 +[2026-05-03 21:56:59.279] [info] [heaters.cpp:423] [1992] __func__:temperature_callback,heater_name:heater_bed,read_time:240.27800000038,last_temp:55.00775160233189,temp:55.00775160233189,target_temp:55,smoothed_temp:55.016306896754266 +[2026-05-03 21:57:06.423] [info] [heaters.cpp:423] [2000] __func__:temperature_callback,heater_name:extruder,read_time:247.42095393650243,last_temp:219.46613384810433,temp:219.46613384810433,target_temp:220,smoothed_temp:220.25748462015173 +[2026-05-03 21:58:28.516] [info] [clocksync.cpp:206] [1992] mcu 'mcu': New minimum RTT: sent_time=354.709907002,half_rtt=7.93749999843385e-05,freq=24000001.64189482 +[2026-05-03 21:58:57.079] [info] [clocksync.cpp:206] [2000] mcu 'toolhead': New minimum RTT: sent_time=383.271145224,half_rtt=0.0002529579999759335,freq=119998542.07394996 +[2026-05-03 21:58:57.081] [error] [tmc_uart.cpp:319] [1945] _decode_read error #1 +[2026-05-03 21:58:59.782] [info] [heaters.cpp:423] [1992] __func__:temperature_callback,heater_name:heater_bed,read_time:360.77800000037996,last_temp:55.00428927175216,temp:55.00428927175216,target_temp:55,smoothed_temp:55.00457226063372 +[2026-05-03 21:59:06.427] [info] [heaters.cpp:423] [2000] __func__:temperature_callback,heater_name:extruder,read_time:367.4224011253596,last_temp:222.1801408253748,temp:222.1801408253748,target_temp:220,smoothed_temp:222.17055090248235 +[2026-05-03 21:59:33.506] [info] [clocksync.cpp:219] [1998] mcu 'bed_sensor': Ignoring clock sample: sent_time=419.697451033,time_avg=390.15813697883556,freq=119998494.08552243,diff=72572.79167938232(0.0006047732639948527),stddev=3761.614330098344 +[2026-05-03 21:59:56.875] [info] [heaters.cpp:905] [1945] print_stop true +[2026-05-03 21:59:56.915] [info] [gcode.cpp:1940] [1951] update_device_status: {"command":"M2202","result":"2503"} +[2026-05-03 21:59:56.915] [info] [device_status.cpp:989] [1951] M2202 result_code:2503 +[2026-05-03 21:59:56.919] [info] [virtual_sdcard.cpp:993] [1945] do_cancel +[2026-05-03 21:59:56.920] [info] [print_stats.cpp:288] [1945] note_finish state cancelled error_message +[2026-05-03 21:59:56.921] [info] [mmu.cpp:4963] [1945] set_error_code error_code 0 0 report_error_code 0 +[2026-05-03 21:59:56.921] [info] [mmu.cpp:4958] [1945] clear_abnormal_feedback #1 __OVER +[2026-05-03 21:59:56.925] [info] [idle_timeout.cpp:138] [1945] handle_print_state print_state:cancelled +[2026-05-03 21:59:57.014] [info] [virtual_sdcard.cpp:1709] [1945] Exiting SD card print (position 0) +[2026-05-03 21:59:57.015] [info] [virtual_sdcard.cpp:1731] [1945] print_stats->note_cancel +[2026-05-03 21:59:57.119] [info] [device_status.cpp:1165] [2007] Stop AI spaghetti detection +[2026-05-03 21:59:57.119] [info] [uds_aicamera_client.cpp:617] [2007] stop_ai_spaghetti_detection called +[2026-05-03 21:59:57.120] [info] [uds_aicamera_client.cpp:374] [2007] Sending UDS request: {"id":3,"method":"ai_detection","params":{"operate":"wire_pause"}} +[2026-05-03 21:59:57.120] [info] [device_ui_message_handle.cpp:374] [2007] report_error: {"id":0,"report":{"error_code":1301,"error_level":3,"message":"ai spaghetti detection error"}} +[2026-05-03 21:59:57.121] [info] [device_status.cpp:1191] [2007] Stop AI foreign object detection +[2026-05-03 21:59:57.121] [info] [device_ui_message_handle.cpp:779] [2007] Reporting history task: {"id":0,"method":"report_history_task","result":{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2}} +[2026-05-03 21:59:57.122] [info] [record_manager.cpp:412] [2007] Adding power outage task, updated its information id a065d20a-a124-4f32-afca-a3dfb699ae8c name ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode status 2. +[2026-05-03 21:59:57.122] [info] [sql_database.cpp:120] [2007] Update SQL: UPDATE task_record SET task_name = ?, begin_time = ?, end_time = ?, task_status = ?, time_lapse_video_status = ?, time_lapse_video_url = ?, time_lapse_video_size = ?, time_lapse_video_duration = ?, upload_flag = ?, file_create_time = ? WHERE task_id = ?; +[2026-05-03 21:59:57.126] [info] [uds_aicamera_client.cpp:41] [2016] Received UDS message: {"id":3,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 21:59:57.126] [info] [uds_aicamera_client.cpp:215] [2016] Received UDS message: {"id":3,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 21:59:57.126] [error] [uds_aicamera_client.cpp:217] [2016] Parsing UDS message without 'result': {"id":3,"method":"ai_detection","operate":"wire_pause"} +[2026-05-03 21:59:57.145] [info] [device_status.cpp:886] [2007] ready_post_change_message {"machine_status":{"progress":0},"print_status":{"current_layer":0,"filename":"","print_duration":0,"remaining_time_sec":0,"total_duration":0,"uuid":""}} +[2026-05-03 21:59:57.146] [info] [device_status.cpp:1674] [2007] Device status change to: 1, last status: 2 +[2026-05-03 21:59:58.116] [warning] [clocksync.cpp:181] [1945] queries_pending 2 +[2026-05-03 21:59:59.357] [info] [pause_resume.cpp:715] [1945] __func__:cmd_CANCEL_PRINT #1 Z_pos:6.930181536924988 +[2026-05-03 21:59:59.358] [info] [heaters.cpp:912] [1945] print_stop false +[2026-05-03 22:00:02.587] [info] [gcode_move.cpp:52] [1945] G180 select 800 +[2026-05-03 22:00:02.589] [info] [gcode.cpp:1006] [1945] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=221.0034787415227 +[2026-05-03 22:00:02.589] [info] [gcode.cpp:1102] [1945] cmd_SET_CONDITION is_ingore = true +[2026-05-03 22:00:02.590] [info] [gcode.cpp:1123] [1945] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 22:00:03.414] [info] [extruder.cpp:493] [1945] cmd_M104 temp 0 index -1 wait false +[2026-05-03 22:00:03.414] [info] [heaters.cpp:1104] [1945] __func__:set_temperature,temp:0,wait:false +[2026-05-03 22:00:03.415] [info] [toolhead.cpp:904] [1945] get_last_move_time +[2026-05-03 22:00:03.415] [info] [heater_bed.cpp:57] [1945] cmd_M140 temp 0 wait false +[2026-05-03 22:00:03.415] [info] [heaters.cpp:1104] [1945] __func__:set_temperature,temp:0,wait:false +[2026-05-03 22:00:03.415] [info] [toolhead.cpp:904] [1945] get_last_move_time +[2026-05-03 22:00:03.718] [info] [toolhead.cpp:904] [1945] get_last_move_time +[2026-05-03 22:00:03.719] [info] [toolhead.cpp:904] [1945] get_last_move_time +[2026-05-03 22:00:04.022] [info] [gcode.cpp:928] [1945] cmd_SET_CONDITION A=BED_MESH_DATEA, B=true, BED_MESH_DATEA=256 +[2026-05-03 22:00:04.022] [info] [gcode.cpp:1102] [1945] cmd_SET_CONDITION is_ingore = false +[2026-05-03 22:00:04.023] [info] [bed_mesh.cpp:2901] [1945] cmd_BED_MESH_PROFILE: from_slicer 0 execute_calirate_from_slicer 0 +[2026-05-03 22:00:04.040] [info] [bed_mesh.cpp:463] [1945] update_status bed_mesh_exist:0x0100 +[2026-05-03 22:00:04.040] [info] [print_stats.cpp:277] [1945] bed_mesh_exist:0x0100 +[2026-05-03 22:00:04.041] [info] [bed_mesh.cpp:2875] [1945] ProfileManager::load_profile default time 0.017045791999976245 +[2026-05-03 22:00:04.042] [info] [mcu.cpp:712] [1945] set_digital pin PB7 425.43501849999996 450.235200006 +[2026-05-03 22:00:04.043] [info] [mcu.cpp:712] [1945] set_digital pin PF6 425.43501849999996 450.236155089 +[2026-05-03 22:00:04.044] [info] [mcu.cpp:712] [1945] set_digital pin PE15 425.43501849999996 450.236929047 +[2026-05-03 22:00:04.044] [info] [mcu.cpp:712] [1945] set_digital pin PE12 425.43501849999996 450.237427756 +[2026-05-03 22:00:04.046] [info] [gcode.cpp:1123] [1945] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 22:00:04.047] [info] [gcode.cpp:945] [1945] cmd_SET_CONDITION A=BED_MESH_DATEB, B=true, BED_MESH_DATEB=256 +[2026-05-03 22:00:04.047] [info] [gcode.cpp:1102] [1945] cmd_SET_CONDITION is_ingore = true +[2026-05-03 22:00:04.048] [info] [gcode.cpp:1123] [1945] cmd_SET_CONDITION_END is_ingore = false +[2026-05-03 22:00:04.048] [info] [pause_resume.cpp:680] [1945] __func__:cmd_CLEAR_PAUSE #1 is_paused:false +[2026-05-03 22:00:04.049] [info] [gcode.cpp:1940] [1951] update_device_status: {"command":"M2202","result":"2504"} +[2026-05-03 22:00:04.049] [info] [device_status.cpp:989] [1951] M2202 result_code:2504 +[2026-05-03 22:00:04.049] [info] [device_status.cpp:991] [1951] Print stopped, ignore sub status update +[2026-05-03 22:00:04.049] [info] [webhooks.cpp:170] [1945] return total: {"id":34,"result":{}} +[2026-05-03 22:00:04.065] [info] [gcode_move.cpp:647] [1945] cmd_M220 speed 50 speed_factor 0.016666666666666666 100 +[2026-05-03 22:00:04.066] [info] [webhooks.cpp:170] [1945] return total: {"id":35,"result":{}} +[2026-05-03 22:00:04.072] [info] [gcode.cpp:838] [1945] cmd_M117 set printer mode: 1 +[2026-05-03 22:00:04.073] [info] [webhooks.cpp:170] [1945] return total: {"id":36,"result":{}} +[2026-05-03 22:00:51.317] [info] [clocksync.cpp:206] [2000] mcu 'toolhead': New minimum RTT: sent_time=497.508129778,half_rtt=0.00025022949998287913,freq=119998507.52737689 +[2026-05-03 22:01:00.283] [info] [heaters.cpp:423] [1992] __func__:temperature_callback,heater_name:heater_bed,read_time:481.27800000037996,last_temp:52.617508691203795,temp:52.617508691203795,target_temp:0,smoothed_temp:52.63252723094103 +[2026-05-03 22:01:06.430] [info] [heaters.cpp:423] [2000] __func__:temperature_callback,heater_name:extruder,read_time:487.4238996413096,last_temp:162.99592066004817,temp:162.99592066004817,target_temp:0,smoothed_temp:163.3217563737613 +[2026-05-03 22:01:17.758] [info] [filament_motion_sensor.cpp:146] [1945] CMD_encoder_sensor_switch:true +[2026-05-03 22:01:17.758] [info] [webhooks.cpp:170] [1945] return total: {"id":37,"result":{}} +[2026-05-03 22:01:27.321] [warning] [por.cpp:211] [1945] trig_shutdonw! +[2026-05-03 22:01:27.322] [info] [virtual_sdcard.cpp:335] [1945] start saving supplement info. +[2026-05-03 22:01:27.323] [info] [serialhdl.cpp:502] [1992] mcu 'mcu': got handle_output name: #output message: command_shutdown_pins_set: shutdown shutdown_pins +[2026-05-03 22:01:27.324] [info] [serialhdl.cpp:502] [1992] mcu 'mcu': got handle_output name: #output message: analog_in_shutdown oid 27 ev1 0 ev2 0 st 9 sc 8 +[2026-05-03 22:01:27.324] [info] [config_manager.cpp:350] [1945] save supplement info success +[2026-05-03 22:01:27.324] [info] [serialhdl.cpp:502] [1992] mcu 'mcu': got handle_output name: #output message: analog_in_shutdown oid 34 ev1 0 ev2 0 st 9 sc 8 +[2026-05-03 22:01:27.325] [warning] [serialhdl.cpp:553] [1992] response->len:12,params['clock']:3609659988,params['static_string_id']:19 mcu mcu 'mcu': shutdown! +[2026-05-03 22:01:27.326] [info] [config_manager.cpp:486] [1945] save persistent supplement info success +[2026-05-03 22:01:27.326] [info] [virtual_sdcard.cpp:338] [1945] start saving print process data. +[2026-05-03 22:01:27.328] [error] [mcu.cpp:1488] [1992] mcu mcu clock32 3609659988 clock64 12199594580 shutdown id 19 msg shutdown_pins +[2026-05-03 22:01:27.328] [info] [virtual_sdcard.cpp:376] [1945] handle_power_outage No data needs to be saved before the actual printing. +[2026-05-03 22:01:27.328] [warning] [por.cpp:225] [1945] por:power_off handle done +[2026-05-03 22:40:21.286] [info] [logger.cpp:80] [1935] elegoo log init finish! +[2026-05-03 22:40:21.330] [info] [main.cpp:209] [1935] inputtty:./config/printer,gcode_fd:4 +[2026-05-03 22:40:21.469] [info] [main.cpp:226] [1935] Starting Elegoo... +[2026-05-03 22:40:21.469] [info] [main.cpp:228] [1935] start_args.size:17,sizeof(long_options):9 +[2026-05-03 22:40:21.470] [info] [main.cpp:231] [1935] start_args[img_version]:00.00.00.00 +[2026-05-03 22:40:21.470] [info] [main.cpp:231] [1935] start_args[gui_version]:01.01.11.03 +[2026-05-03 22:40:21.470] [info] [main.cpp:231] [1935] start_args[elegoo_version]:03.26.17.07 +[2026-05-03 22:40:21.471] [info] [main.cpp:231] [1935] start_args[camera_version]:00.00.00.00 +[2026-05-03 22:40:21.471] [info] [main.cpp:231] [1935] start_args[canvas_version]:00.00.00.00 +[2026-05-03 22:40:21.471] [info] [main.cpp:231] [1935] start_args[ota_version]:01.03.02.36 +[2026-05-03 22:40:21.471] [info] [main.cpp:231] [1935] start_args[bed_sensor_version]:00.00.00.00 +[2026-05-03 22:40:21.472] [info] [main.cpp:231] [1935] start_args[start_reason]:startup +[2026-05-03 22:40:21.472] [info] [main.cpp:231] [1935] start_args[apiserver]:/tmp/elegoo_uds +[2026-05-03 22:40:21.472] [info] [main.cpp:231] [1935] start_args[toolhead_gd32_version]:00.00.00.00 +[2026-05-03 22:40:21.472] [info] [main.cpp:231] [1935] start_args[autosave_file]:/opt/usr/cfg/autosave.cfg +[2026-05-03 22:40:21.473] [info] [main.cpp:231] [1935] start_args[gcode_fd]:4 +[2026-05-03 22:40:21.473] [info] [main.cpp:231] [1935] start_args[config_file]:/opt/inst/printer_dsp.cfg +[2026-05-03 22:40:21.473] [info] [main.cpp:231] [1935] start_args[cpu_info]:2 core ARMv7 Processor rev 5 (v7l) +[2026-05-03 22:40:21.473] [info] [main.cpp:231] [1935] start_args[mcu_gd32_version]:00.00.00.00 +[2026-05-03 22:40:21.473] [info] [main.cpp:231] [1935] start_args[machine_model]:Centauri Carbon 2 +[2026-05-03 22:40:21.474] [info] [main.cpp:231] [1935] start_args[os_version]:01.02.12.01 +[2026-05-03 22:40:21.474] [info] [main.cpp:236] [1935] long_options[debuginput]:i +[2026-05-03 22:40:21.474] [info] [main.cpp:236] [1935] long_options[input-tty]:I +[2026-05-03 22:40:21.475] [info] [main.cpp:236] [1935] long_options[api-server]:a +[2026-05-03 22:40:21.475] [info] [main.cpp:236] [1935] long_options[logfile]:l +[2026-05-03 22:40:21.475] [info] [main.cpp:236] [1935] long_options[verbose]:v +[2026-05-03 22:40:21.475] [info] [main.cpp:236] [1935] long_options[debugoutput]:o +[2026-05-03 22:40:21.476] [info] [main.cpp:236] [1935] long_options[dictionary]:d +[2026-05-03 22:40:21.476] [info] [main.cpp:236] [1935] long_options[import-test]:t +[2026-05-03 22:40:21.477] [info] [printer.cpp:50] [1935] create Printer success! +[2026-05-03 22:40:21.478] [info] [printer.cpp:366] [1935] connect begin! +[2026-05-03 22:40:21.478] [info] [printer.cpp:284] [1935] read_config begin! +[2026-05-03 22:40:21.507] [info] [gcode.cpp:1927] [1944] create DeviceStatusWorker success!! +[2026-05-03 22:40:21.664] [info] [webhooks.cpp:607] [1935] create WebHooks success! +[2026-05-03 22:40:21.665] [info] [webhooks.cpp:384] [1935] create ServerSocket success! /tmp/elegoo_uds +[2026-05-03 22:40:21.666] [info] [webhooks.cpp:443] [1935] create ServerSocket success! +[2026-05-03 22:40:21.668] [info] [webhooks.cpp:1317] [1946] create DeviceExceptWorker success!! +[2026-05-03 22:40:21.996] [info] [config_manager.cpp:171] [1935] begin read sn info +[2026-05-03 22:40:21.997] [info] [config_manager.cpp:205] [1935] read product auth success, sn: F01CFFQQFN55YKS +[2026-05-03 22:40:21.998] [info] [config_manager.cpp:148] [1935] machine: {"machine":{"model":"Centauri Carbon 2"},"versions":[{"os_version":"01.02.12.01"},{"mcu_gd32_version":"00.00.00.00"},{"toolhead_gd32_version":"00.00.00.00"},{"bed_sensor_version":"00.00.00.00"},{"canvas_version":"00.00.00.00"},{"camera_version":"00.00.00.00"},{"elegoo_version":"03.26.17.07"},{"gui_version":"01.01.11.03"},{"ota_version":"01.03.02.36"},{"img_version":"00.00.00.00"}]} +[2026-05-03 22:40:21.999] [info] [config_manager.cpp:209] [1935] begin read supplement info +[2026-05-03 22:40:22.001] [info] [config_manager.cpp:306] [1935] token info: token: miM2yt, token_switch_enabled: true, is_lan_mode: true, power_outage_resume_enabled: true, region: 1 +[2026-05-03 22:40:22.005] [info] [config_manager.cpp:453] [1935] load persistent supplement info success +[2026-05-03 22:40:22.006] [info] [device_status.cpp:133] [1935] Create component manager for Centauri Carbon 2 +[2026-05-03 22:40:22.168] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_details WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_details GROUP BY filename HAVING MAX(create_time)); +[2026-05-03 22:40:22.170] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_thumbnail WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_thumbnail GROUP BY filename); +[2026-05-03 22:40:22.173] [info] [record_manager.cpp:302] [1935] Loaded 3 tasks from the database. +[2026-05-03 22:40:22.174] [info] [record_manager.cpp:307] [1935] end task info id a065d20a-a124-4f32-afca-a3dfb699ae8c name ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode status 2. +[2026-05-03 22:40:22.175] [info] [record_manager.cpp:318] [1935] Loaded 11 files from the database. +[2026-05-03 22:40:22.176] [info] [record_manager.cpp:323] [1935] Loaded 3 thumbnails from the database. +[2026-05-03 22:40:22.177] [info] [record_manager.cpp:328] [1935] Loaded 0 delete file records from the database. +[2026-05-03 22:40:22.177] [info] [sql_database.cpp:417] [1935] Loaded exception message: id 4, code 1263 +[2026-05-03 22:40:22.177] [info] [sql_database.cpp:417] [1935] Loaded exception message: id 3, code 1263 +[2026-05-03 22:40:22.177] [info] [sql_database.cpp:417] [1935] Loaded exception message: id 2, code 801 +[2026-05-03 22:40:22.177] [info] [sql_database.cpp:417] [1935] Loaded exception message: id 1, code 801 +[2026-05-03 22:40:22.178] [info] [record_manager.cpp:333] [1935] Loaded 4 exception messages from the database. +[2026-05-03 22:40:22.178] [info] [record_manager.cpp:827] [1935] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 22:40:22.178] [info] [record_manager.cpp:827] [1935] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-03 22:40:22.178] [info] [record_manager.cpp:827] [1935] File exists: /opt/usr/gcode/local/IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 22:40:22.179] [info] [record_manager.cpp:831] [1935] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 22:40:22.179] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 22:40:22.194] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 22:40:22.195] [info] [record_manager.cpp:344] [1935] check_db_files file[ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode] not exist system, clear it from database +[2026-05-03 22:40:22.195] [info] [record_manager.cpp:831] [1935] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-03 22:40:22.196] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 22:40:22.207] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 22:40:22.208] [info] [record_manager.cpp:344] [1935] check_db_files file[ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode] not exist system, clear it from database +[2026-05-03 22:40:22.209] [info] [record_manager.cpp:831] [1935] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-03 22:40:22.209] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 22:40:22.220] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 22:40:22.220] [info] [record_manager.cpp:344] [1935] check_db_files file[ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode] not exist system, clear it from database +[2026-05-03 22:40:22.221] [info] [record_manager.cpp:831] [1935] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-03 22:40:22.222] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 22:40:22.235] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 22:40:22.235] [info] [record_manager.cpp:344] [1935] check_db_files file[ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode] not exist system, clear it from database +[2026-05-03 22:40:22.236] [info] [record_manager.cpp:831] [1935] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-03 22:40:22.236] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 22:40:22.248] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 22:40:22.248] [info] [record_manager.cpp:344] [1935] check_db_files file[ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode] not exist system, clear it from database +[2026-05-03 22:40:22.249] [info] [record_manager.cpp:831] [1935] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-03 22:40:22.249] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 22:40:22.261] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 22:40:22.262] [info] [record_manager.cpp:344] [1935] check_db_files file[ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode] not exist system, clear it from database +[2026-05-03 22:40:22.263] [info] [record_manager.cpp:831] [1935] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-03 22:40:22.263] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 22:40:22.276] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 22:40:22.276] [info] [record_manager.cpp:344] [1935] check_db_files file[ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode] not exist system, clear it from database +[2026-05-03 22:40:22.277] [info] [record_manager.cpp:831] [1935] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-03 22:40:22.277] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 22:40:22.289] [info] [sql_database.cpp:164] [1935] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 22:40:22.289] [info] [record_manager.cpp:344] [1935] check_db_files file[ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode] not exist system, clear it from database +[2026-05-03 22:40:22.290] [info] [record_manager.cpp:361] [1935] Local file count 11 does not match cached file details 3, need to parse online files. +[2026-05-03 22:40:22.290] [info] [record_manager.cpp:607] [1935] Parsing local files in /opt/usr/gcode/local/ +[2026-05-03 22:40:22.290] [info] [record_manager.cpp:623] [1935] File ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode already exists in cache, skipping parsing. +[2026-05-03 22:40:22.290] [info] [record_manager.cpp:496] [1935] Parsing local file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-03 22:40:22.290] [error] [record_manager.cpp:32] [1935] stat failed /opt/usr/gcode/local//ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-03 22:40:22.291] [info] [record_manager.cpp:383] [1935] color map size: 0 +[2026-05-03 22:40:22.291] [info] [sql_database.cpp:97] [1935] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 22:40:22.304] [info] [record_manager.cpp:512] [1935] Parsed file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 22:40:22.304] [info] [record_manager.cpp:496] [1935] Parsing local file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 22:40:22.304] [error] [record_manager.cpp:32] [1935] stat failed /opt/usr/gcode/local//ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 22:40:22.305] [info] [record_manager.cpp:383] [1935] color map size: 0 +[2026-05-03 22:40:22.305] [info] [sql_database.cpp:97] [1935] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 22:40:22.316] [info] [record_manager.cpp:512] [1935] Parsed file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 22:40:22.316] [info] [record_manager.cpp:496] [1935] Parsing local file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-03 22:40:22.317] [error] [record_manager.cpp:32] [1935] stat failed /opt/usr/gcode/local//ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-03 22:40:22.317] [info] [record_manager.cpp:383] [1935] color map size: 0 +[2026-05-03 22:40:22.317] [info] [sql_database.cpp:97] [1935] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 22:40:22.328] [info] [record_manager.cpp:512] [1935] Parsed file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 22:40:22.328] [info] [record_manager.cpp:496] [1935] Parsing local file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-03 22:40:22.329] [error] [record_manager.cpp:32] [1935] stat failed /opt/usr/gcode/local//ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-03 22:40:22.329] [info] [record_manager.cpp:383] [1935] color map size: 0 +[2026-05-03 22:40:22.329] [info] [sql_database.cpp:97] [1935] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 22:40:22.340] [info] [record_manager.cpp:512] [1935] Parsed file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 22:40:22.340] [info] [record_manager.cpp:496] [1935] Parsing local file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-03 22:40:22.340] [error] [record_manager.cpp:32] [1935] stat failed /opt/usr/gcode/local//ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-03 22:40:22.340] [info] [record_manager.cpp:383] [1935] color map size: 0 +[2026-05-03 22:40:22.341] [info] [sql_database.cpp:97] [1935] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 22:40:22.354] [info] [record_manager.cpp:512] [1935] Parsed file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 22:40:22.354] [info] [record_manager.cpp:496] [1935] Parsing local file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-03 22:40:22.354] [error] [record_manager.cpp:32] [1935] stat failed /opt/usr/gcode/local//ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-03 22:40:22.354] [info] [record_manager.cpp:383] [1935] color map size: 0 +[2026-05-03 22:40:22.355] [info] [sql_database.cpp:97] [1935] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 22:40:22.366] [info] [record_manager.cpp:512] [1935] Parsed file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 22:40:22.366] [info] [record_manager.cpp:623] [1935] File ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode already exists in cache, skipping parsing. +[2026-05-03 22:40:22.367] [info] [record_manager.cpp:496] [1935] Parsing local file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-03 22:40:22.367] [error] [record_manager.cpp:32] [1935] stat failed /opt/usr/gcode/local//ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-03 22:40:22.367] [info] [record_manager.cpp:383] [1935] color map size: 0 +[2026-05-03 22:40:22.367] [info] [sql_database.cpp:97] [1935] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 22:40:22.378] [info] [record_manager.cpp:512] [1935] Parsed file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 22:40:22.378] [info] [record_manager.cpp:623] [1935] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode already exists in cache, skipping parsing. +[2026-05-03 22:40:22.379] [info] [record_manager.cpp:496] [1935] Parsing local file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-03 22:40:22.379] [error] [record_manager.cpp:32] [1935] stat failed /opt/usr/gcode/local//ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-03 22:40:22.379] [info] [record_manager.cpp:383] [1935] color map size: 0 +[2026-05-03 22:40:22.379] [info] [sql_database.cpp:97] [1935] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 22:40:22.390] [info] [record_manager.cpp:512] [1935] Parsed file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 22:40:22.390] [info] [record_manager.cpp:636] [1935] Finished parsing local files, total: 11 +[2026-05-03 22:40:22.390] [info] [record_manager.cpp:365] [1935] RecordManager initialized successfully. +[2026-05-03 22:40:22.391] [info] [pins.cpp:112] [1935] create PrinterPins success! +[2026-05-03 22:40:22.421] [info] [msgproto.cpp:606] [1935] create MessageParser success! +[2026-05-03 22:40:22.422] [info] [mcu.cpp:1963] [1935] restart_via_remoterpc +[2026-05-03 22:40:22.422] [error] [serialhdl.cpp:309] [1935] SerialReader::disconnect() +[2026-05-03 22:40:22.422] [info] [dsp_helper.h:31] [1935] remoterpc_ctrl 0 +[2026-05-03 22:40:22.505] [info] [webhooks.cpp:56] [1935] webhooks client 37370380: New connection +[2026-05-03 22:40:22.509] [info] [webhooks.cpp:1232] [1935] handle_query is_subscribe true : {"canvas_dev":["fds","canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[2026-05-03 22:40:22.547] [info] [webhooks.cpp:170] [1935] return total: {"id":3,"result":{"eventtime":22.825742219,"status":null}} +[2026-05-03 22:40:22.552] [info] [webhooks.cpp:1232] [1935] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[2026-05-03 22:40:22.553] [info] [device_ui_message_handle.cpp:65] [1935] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[2026-05-03 22:40:22.553] [info] [device_ui_message_handle.cpp:503] [1935] Total tasks: 3 +[2026-05-03 22:40:22.554] [info] [webhooks.cpp:799] [1935] return handle_sync_info: {"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3} +[2026-05-03 22:40:22.555] [info] [webhooks.cpp:170] [1935] return total: {"id":5,"method":"sync_info","result":{"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3}} +[2026-05-03 22:40:22.558] [warning] [webhooks.cpp:148] [1935] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 22:40:22.559] [info] [webhooks.cpp:170] [1935] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":7} +[2026-05-03 22:40:22.559] [info] [webhooks.cpp:170] [1935] return total: {"id":9,"result":{}} +[2026-05-03 22:40:22.561] [warning] [webhooks.cpp:148] [1935] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 22:40:22.562] [info] [webhooks.cpp:170] [1935] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":11} +[2026-05-03 22:40:22.562] [info] [device_ui_message_handle.cpp:255] [1935] Handling bind function request {"script":"get_device_info"} +[2026-05-03 22:40:22.563] [info] [webhooks.cpp:768] [1935] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-05-03 22:40:22.563] [info] [webhooks.cpp:170] [1935] return total: {"id":13,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-05-03 22:40:22.564] [info] [device_ui_message_handle.cpp:65] [1935] Handling sync info request {"region_code":1,"script":"set_region"} +[2026-05-03 22:40:22.565] [info] [device_ui_message_handle.cpp:129] [1935] Handling set region request 1 +[2026-05-03 22:40:22.565] [info] [device_ui_message_handle.cpp:132] [1935] Region is the same as current region: 1 +[2026-05-03 22:40:22.565] [info] [webhooks.cpp:799] [1935] return handle_sync_info: {"script":"set_region"} +[2026-05-03 22:40:22.565] [info] [webhooks.cpp:170] [1935] return total: {"id":15,"method":"sync_info","result":{"script":"set_region"}} +[2026-05-03 22:40:23.015] [warning] [webhooks.cpp:148] [1935] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 22:40:23.016] [info] [webhooks.cpp:170] [1935] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":6} +[2026-05-03 22:40:23.017] [info] [device_ui_message_handle.cpp:321] [1935] Get Network access cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-03 22:40:23.017] [info] [webhooks.cpp:756] [1935] return handle_get_network_access_cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-03 22:40:23.017] [info] [webhooks.cpp:170] [1935] return total: {"id":10,"method":"get_network_access_cfg","result":{"object":{"lan_status":true,"token":"miM2yt","token_status":true}}} +[2026-05-03 22:40:23.018] [info] [device_ui_message_handle.cpp:65] [1935] Handling sync info request {"script":"get_device_status"} +[2026-05-03 22:40:23.019] [info] [device_ui_message_handle.cpp:143] [1935] Handling get device status request +[2026-05-03 22:40:23.019] [info] [device_ui_message_handle.cpp:154] [1935] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-03 22:40:23.020] [info] [webhooks.cpp:799] [1935] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-03 22:40:23.020] [info] [webhooks.cpp:170] [1935] return total: {"id":14,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[2026-05-03 22:40:23.021] [info] [webhooks.cpp:170] [1935] return total: {"id":4,"result":{"eventtime":23.326166052,"status":null}} +[2026-05-03 22:40:23.023] [warning] [webhooks.cpp:148] [1935] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 22:40:23.023] [info] [webhooks.cpp:170] [1935] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":8} +[2026-05-03 22:40:23.024] [info] [device_ui_message_handle.cpp:65] [1935] Handling sync info request {"script":"set_status","status":1,"sub_status":0} +[2026-05-03 22:40:23.024] [info] [device_ui_message_handle.cpp:553] [1935] Setting status: 1, sub_status: 0 +[2026-05-03 22:40:23.024] [info] [device_status.cpp:1204] [1935] Set UI ready: true +[2026-05-03 22:40:23.025] [info] [webhooks.cpp:799] [1935] return handle_sync_info: {"script":"set_status"} +[2026-05-03 22:40:23.025] [info] [webhooks.cpp:170] [1935] return total: {"id":16,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 22:40:23.423] [info] [dsp_helper.h:31] [1935] remoterpc_ctrl 1 +[2026-05-03 22:40:23.542] [warning] [webhooks.cpp:148] [1935] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 22:40:23.542] [info] [webhooks.cpp:170] [1935] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":12} +[2026-05-03 22:40:24.543] [info] [msgproto.cpp:606] [1935] create MessageParser success! +[2026-05-03 22:40:24.546] [info] [mcu.cpp:1049] [1935] MCU 'bed_sensor' restart power +[2026-05-03 22:40:24.957] [info] [mcu.cpp:1072] [1935] bootloader mode, try jump to app! +[2026-05-03 22:40:24.986] [info] [msgproto.cpp:606] [1935] create MessageParser success! +[2026-05-03 22:40:24.988] [info] [mcu.cpp:1049] [1935] MCU 'toolhead' restart power +[2026-05-03 22:40:25.398] [info] [mcu.cpp:1072] [1935] bootloader mode, try jump to app! +[2026-05-03 22:40:25.536] [info] [bed_mesh.cpp:1466] [1935] zero_ref_pos size 0 +[2026-05-03 22:40:25.653] [info] [bed_mesh.cpp:2722] [1935] ProfileManager profile->get_name bed_mesh +[2026-05-03 22:40:25.653] [info] [bed_mesh.cpp:2722] [1935] ProfileManager profile->get_name bed_mesh ADAPTIVE +[2026-05-03 22:40:25.654] [info] [bed_mesh.cpp:2722] [1935] ProfileManager profile->get_name bed_mesh default +[2026-05-03 22:40:25.659] [info] [gcode_move.cpp:60] [1935] GCodeMove init! +[2026-05-03 22:40:25.703] [info] [gcode_move.cpp:119] [1935] GCodeMove init success!! +[2026-05-03 22:40:25.762] [info] [gcode_move.cpp:274] [1935] set_move_transform transform: force:false +[2026-05-03 22:40:25.802] [info] [print_stats.cpp:26] [1935] PrintStats init! +[2026-05-03 22:40:25.803] [info] [print_stats.cpp:55] [1935] PrintStats init success!! +[2026-05-03 22:40:25.804] [info] [bed_mesh.cpp:463] [1935] update_status bed_mesh_exist:0x0100 +[2026-05-03 22:40:25.804] [info] [print_stats.cpp:277] [1935] bed_mesh_exist:0x0100 +[2026-05-03 22:40:25.804] [warning] [extras_factory.cpp:323] [1935] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-03 22:40:25.804] [warning] [extras_factory.cpp:323] [1935] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-03 22:40:25.805] [info] [beep_ctrl.cpp:39] [1935] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[2026-05-03 22:40:25.807] [info] [beep_ctrl.cpp:147] [1935] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[2026-05-03 22:40:25.807] [info] [beep_ctrl.cpp:262] [1935] exec_cmd data 0 +[2026-05-03 22:40:25.808] [info] [beep_ctrl.cpp:181] [1935] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[2026-05-03 22:40:25.808] [info] [beep_ctrl.cpp:262] [1935] exec_cmd data 333333 +[2026-05-03 22:40:25.808] [info] [beep_ctrl.cpp:199] [1935] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[2026-05-03 22:40:25.809] [info] [beep_ctrl.cpp:262] [1935] exec_cmd data 166666 +[2026-05-03 22:40:25.809] [info] [beep_ctrl.cpp:217] [1935] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[2026-05-03 22:40:25.809] [info] [beep_ctrl.cpp:262] [1935] exec_cmd data normal +[2026-05-03 22:40:25.869] [info] [query_adc.cpp:36] [1935] QueryADC init success! +[2026-05-03 22:40:25.871] [info] [mmu.cpp:1447] [1935] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[2026-05-03 22:40:25.871] [info] [mmu.cpp:1465] [1935] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[2026-05-03 22:40:25.873] [info] [cavity_fan.cpp:27] [1935] PrinterFanCavity init! +[2026-05-03 22:40:25.874] [info] [cavity_fan.cpp:85] [1935] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[2026-05-03 22:40:25.875] [info] [cavity_fan.cpp:96] [1935] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[2026-05-03 22:40:25.875] [info] [cavity_fan.cpp:104] [1935] temp_drop_det_time 60 5 120 1.5 180 +[2026-05-03 22:40:25.876] [info] [fan.cpp:55] [1935] __func__:Fan #1 str_pin:PD17 +[2026-05-03 22:40:25.877] [info] [cavity_fan.cpp:115] [1935] PrinterFanCavity init success!! +[2026-05-03 22:40:25.878] [info] [stepper_enable.cpp:27] [1935] PrinterStepperEnable init! +[2026-05-03 22:40:25.880] [info] [fan.cpp:55] [1935] __func__:Fan #1 str_pin:PG15 +[2026-05-03 22:40:25.882] [info] [fan.cpp:55] [1935] __func__:Fan #1 str_pin:toolhead:PA8 +[2026-05-03 22:40:25.885] [info] [fan.cpp:55] [1935] __func__:Fan #1 str_pin:PD15 +[2026-05-03 22:40:25.891] [info] [exclude_object.cpp:28] [1935] ExcludeObject init! +[2026-05-03 22:40:25.893] [info] [exclude_object.cpp:79] [1935] ExcludeObject init success! +[2026-05-03 22:40:25.899] [warning] [extras_factory.cpp:323] [1935] create extras: "g180_load_config" failer! +[2026-05-03 22:40:25.901] [info] [heater_bed.cpp:18] [1935] PrinterHeaterBed Init! +[2026-05-03 22:40:25.928] [info] [heaters.cpp:873] [1935] PrinterHeaters init! +[2026-05-03 22:40:25.930] [info] [heaters.cpp:898] [1935] PrinterHeaters init success! +[2026-05-03 22:40:25.943] [info] [heaters.cpp:935] [1935] c->get_name(): thermistor NTC 100K beta 3950 +[2026-05-03 22:40:25.944] [info] [thermistor.cpp:138] [1935] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[2026-05-03 22:40:25.945] [info] [heaters.cpp:935] [1935] c->get_name(): thermistor NTC 100K beta 3950 DSP +[2026-05-03 22:40:25.946] [info] [thermistor.cpp:138] [1935] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[2026-05-03 22:40:25.985] [info] [utilities.cpp:52] [1935] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[2026-05-03 22:40:25.987] [info] [thermistor.cpp:146] [1935] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[2026-05-03 22:40:25.987] [info] [heaters.cpp:935] [1935] c->get_name(): thermistor NTC 100K beta 4300 +[2026-05-03 22:40:25.988] [info] [thermistor.cpp:138] [1935] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[2026-05-03 22:40:25.988] [info] [heaters.cpp:935] [1935] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[2026-05-03 22:40:25.989] [info] [thermistor.cpp:138] [1935] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[2026-05-03 22:40:25.989] [info] [heaters.cpp:935] [1935] c->get_name(): thermistor NTC R25 350 +[2026-05-03 22:40:25.990] [info] [thermistor.cpp:138] [1935] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[2026-05-03 22:40:25.990] [info] [heaters.cpp:943] [1935] PrinterHeaters::load_config success! +[2026-05-03 22:40:25.991] [info] [heaters.cpp:1032] [1935] setup_sensor success! +[2026-05-03 22:40:25.991] [info] [adc_temperature.cpp:29] [1935] __func__:PrinterADCtoTemperature name:heater_bed +[2026-05-03 22:40:25.991] [info] [adc_temperature.cpp:35] [1935] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[2026-05-03 22:40:25.992] [info] [adc_temperature.cpp:165] [1935] name:heater_bed +[2026-05-03 22:40:25.992] [info] [error_mcu.cpp:101] [1935] create PrinterMCUError success! +[2026-05-03 22:40:25.993] [info] [heaters.cpp:83] [1935] Heater init! name: heater_bed +[2026-05-03 22:40:25.994] [info] [heaters.cpp:122] [1935] __func__:Heater,heater_pin:PG13 +[2026-05-03 22:40:25.996] [info] [pid_calibrate.cpp:43] [1935] PIDCalibrate init success!! +[2026-05-03 22:40:25.997] [warning] [heaters.cpp:329] [1935] Heater init success!!!! +[2026-05-03 22:40:25.997] [warning] [heaters.cpp:985] [1935] debug name heater_bed, gcode_id B +[2026-05-03 22:40:25.999] [info] [heater_bed.cpp:41] [1935] PrinterHeaterBed Init success! +[2026-05-03 22:40:25.999] [info] [heater_fan.cpp:24] [1935] PrinterHeaterFan init! +[2026-05-03 22:40:26.000] [info] [fan.cpp:55] [1935] __func__:Fan #1 str_pin:toolhead:PB13 +[2026-05-03 22:40:26.001] [info] [heater_fan.cpp:46] [1935] PrinterHeaterFan init success!! +[2026-05-03 22:40:26.004] [info] [idle_timeout.cpp:28] [1935] init IdleTimeout ... +[2026-05-03 22:40:26.006] [info] [idle_timeout.cpp:72] [1935] init IdleTimeout success !!! +[2026-05-03 22:40:26.062] [info] [bulk_sensor.cpp:312] [1935] unpack_fmt:mqtt_strategy_->is_valid(): true +[2026-05-03 22:40:30.666] [info] [mmu.cpp:2093] [1935] {"command":"CANVAS_SOFTWARE_VERSION","result":"00.00.00.44"} +[2026-05-03 22:40:30.667] [info] [gcode.cpp:1940] [1944] update_device_status: {"command":"CANVAS_SOFTWARE_VERSION","result":"00.00.00.44"} +[2026-05-03 22:40:30.905] [warning] [clocksync.cpp:181] [1935] queries_pending 2 +[2026-05-03 22:40:30.906] [info] [clocksync.cpp:206] [1985] mcu 'mcu': New minimum RTT: sent_time=31.220096556,half_rtt=9.937499999956856e-05,freq=23999997.099681586 +[2026-05-03 22:40:31.286] [info] [mqtt_connector.cpp:498] [1998] Starting heartbeat monitor thread. +[2026-05-03 22:40:31.286] [info] [timer_manager.cpp:72] [1998] Adding timer task: LanMQTTStrategy_heartbeat_monitor, interval: 20000 ms, repeat: true +[2026-05-03 22:40:31.287] [info] [mqtt_connector.cpp:295] [1998] Subscribed to topic: elegoo/F01CFFQQFN55YKS/api_register +[2026-05-03 22:40:32.874] [info] [clocksync.cpp:206] [1985] mcu 'mcu': New minimum RTT: sent_time=33.188206974,half_rtt=9.695799999676069e-05,freq=23999975.27041678 +[2026-05-03 22:40:36.827] [info] [clocksync.cpp:206] [1994] mcu 'toolhead': New minimum RTT: sent_time=37.140345142,half_rtt=0.0002590210000015247,freq=119998100.2712111 +[2026-05-03 22:40:39.719] [info] [clocksync.cpp:206] [1988] mcu 'bed_sensor': New minimum RTT: sent_time=40.032572352,half_rtt=0.0001718124999996462,freq=119998326.35413955 +[2026-05-03 22:40:39.765] [info] [clocksync.cpp:206] [1985] mcu 'mcu': New minimum RTT: sent_time=40.079487352,half_rtt=9.533300000086342e-05,freq=23999985.432694547 +[2026-05-03 22:40:41.688] [info] [clocksync.cpp:206] [1988] mcu 'bed_sensor': New minimum RTT: sent_time=42.001584519000005,half_rtt=0.00016287499999734223,freq=119998334.71647617 +[2026-05-03 22:40:41.749] [info] [clocksync.cpp:206] [1994] mcu 'toolhead': New minimum RTT: sent_time=42.063085144,half_rtt=0.00025475000000341197,freq=119998208.72708154 +[2026-05-03 22:40:49.609] [info] [clocksync.cpp:206] [1985] mcu 'mcu': New minimum RTT: sent_time=49.923038815,half_rtt=9.372899999959827e-05,freq=23999997.286238622 +[2026-05-03 22:41:01.430] [info] [clocksync.cpp:206] [1985] mcu 'mcu': New minimum RTT: sent_time=61.744732737,half_rtt=9.316650000101845e-05,freq=23999997.544271808 +[2026-05-03 22:41:50.652] [info] [clocksync.cpp:206] [1985] mcu 'mcu': New minimum RTT: sent_time=110.965850552,half_rtt=9.122949999351704e-05,freq=23999999.132577315 +[2026-05-03 22:42:12.341] [info] [clocksync.cpp:206] [1994] mcu 'toolhead': New minimum RTT: sent_time=132.65448697899998,half_rtt=0.0002527084999996987,freq=119998285.96254738 +[2026-05-03 22:42:23.831] [info] [heaters.cpp:423] [1985] __func__:temperature_callback,heater_name:heater_bed,read_time:120.27800000037998,last_temp:27.430609591286895,temp:27.430609591286895,target_temp:0,smoothed_temp:27.426513572796093 +[2026-05-03 22:42:29.973] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:126.41969403870573,last_temp:29.936389570037363,temp:29.936389570037363,target_temp:0,smoothed_temp:29.88657647718362 +[2026-05-03 22:44:06.548] [info] [clocksync.cpp:206] [1994] mcu 'toolhead': New minimum RTT: sent_time=246.861207742,half_rtt=0.0002511250000054588,freq=119998308.63130203 +[2026-05-03 22:44:12.455] [info] [clocksync.cpp:206] [1994] mcu 'toolhead': New minimum RTT: sent_time=252.76873136999998,half_rtt=0.00025072900001532616,freq=119998305.89911817 +[2026-05-03 22:44:23.831] [info] [heaters.cpp:423] [1985] __func__:temperature_callback,heater_name:heater_bed,read_time:240.27800000038,last_temp:27.15790775383698,temp:27.15790775383698,target_temp:0,smoothed_temp:27.16336190822441 +[2026-05-03 22:44:29.975] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:246.4213841288754,last_temp:29.422777208104776,temp:29.422777208104776,target_temp:0,smoothed_temp:29.38788723816013 +[2026-05-03 22:44:43.891] [info] [clocksync.cpp:206] [1988] mcu 'bed_sensor': New minimum RTT: sent_time=284.20526621799996,half_rtt=0.00016352100001881809,freq=119998488.72579214 +[2026-05-03 22:44:50.832] [info] [clocksync.cpp:206] [1985] mcu 'mcu': New minimum RTT: sent_time=291.146433472,half_rtt=8.906249999540705e-05,freq=23999999.89595413 +[2026-05-03 22:45:37.061] [info] [clocksync.cpp:206] [1988] mcu 'bed_sensor': New minimum RTT: sent_time=337.374949535,half_rtt=0.00016191700001400022,freq=119998524.98887527 +[2026-05-03 22:45:54.847] [info] [clocksync.cpp:206] [1985] mcu 'mcu': New minimum RTT: sent_time=355.161097752,half_rtt=8.910400001127528e-05,freq=23999999.63800091 +[2026-05-03 22:46:18.476] [warning] [clocksync.cpp:181] [1935] queries_pending 2 +[2026-05-03 22:46:24.331] [info] [heaters.cpp:423] [1985] __func__:temperature_callback,heater_name:heater_bed,read_time:360.77800000037996,last_temp:26.91206004043164,temp:26.91206004043164,target_temp:0,smoothed_temp:26.91429657313766 +[2026-05-03 22:46:27.338] [info] [clocksync.cpp:206] [1985] mcu 'mcu': New minimum RTT: sent_time=387.652694018,half_rtt=8.843750001119588e-05,freq=24000003.572616667 +[2026-05-03 22:46:29.977] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:366.4230455004832,last_temp:28.898857745779765,temp:28.898857745779765,target_temp:0,smoothed_temp:29.0871334887621 +[2026-05-03 22:46:35.231] [info] [clocksync.cpp:206] [1994] mcu 'toolhead': New minimum RTT: sent_time=395.54423673,half_rtt=0.0002510204999737198,freq=119998345.88545015 +[2026-05-03 22:47:02.794] [info] [clocksync.cpp:206] [1994] mcu 'toolhead': New minimum RTT: sent_time=423.10745282600004,half_rtt=0.0002454789999717377,freq=119998346.61968672 +[2026-05-03 22:48:24.831] [info] [heaters.cpp:423] [1985] __func__:temperature_callback,heater_name:heater_bed,read_time:481.27800000037996,last_temp:26.655372017383172,temp:26.655372017383172,target_temp:0,smoothed_temp:26.655273417506585 +[2026-05-03 22:48:29.978] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:486.42467023152665,last_temp:28.898857745779765,temp:28.898857745779765,target_temp:0,smoothed_temp:28.786145722262855 +[2026-05-03 22:49:27.669] [warning] [por.cpp:211] [1935] trig_shutdonw! +[2026-05-03 22:49:27.670] [info] [virtual_sdcard.cpp:335] [1935] start saving supplement info. +[2026-05-03 22:49:27.671] [info] [serialhdl.cpp:502] [1985] mcu 'mcu': got handle_output name: #output message: command_shutdown_pins_set: shutdown shutdown_pins +[2026-05-03 22:49:27.672] [info] [serialhdl.cpp:502] [1985] mcu 'mcu': got handle_output name: #output message: analog_in_shutdown oid 27 ev1 0 ev2 0 st 9 sc 8 +[2026-05-03 22:49:27.672] [info] [config_manager.cpp:350] [1935] save supplement info success +[2026-05-03 22:49:27.672] [info] [serialhdl.cpp:502] [1985] mcu 'mcu': got handle_output name: #output message: analog_in_shutdown oid 34 ev1 0 ev2 0 st 9 sc 8 +[2026-05-03 22:49:27.673] [info] [config_manager.cpp:486] [1935] save persistent supplement info success +[2026-05-03 22:49:27.674] [info] [virtual_sdcard.cpp:338] [1935] start saving print process data. +[2026-05-03 22:49:27.674] [warning] [serialhdl.cpp:553] [1985] response->len:11,params['clock']:173905592,params['static_string_id']:19 mcu mcu 'mcu': shutdown! +[2026-05-03 22:49:27.675] [info] [virtual_sdcard.cpp:376] [1935] handle_power_outage No data needs to be saved before the actual printing. +[2026-05-03 22:49:27.675] [warning] [por.cpp:225] [1935] por:power_off handle done +[2026-05-03 22:49:27.679] [error] [mcu.cpp:1488] [1985] mcu mcu clock32 173905592 clock64 13058807480 shutdown id 19 msg shutdown_pins +[2026-05-03 22:54:07.031] [info] [logger.cpp:80] [1934] elegoo log init finish! +[2026-05-03 22:54:07.090] [info] [main.cpp:209] [1934] inputtty:./config/printer,gcode_fd:4 +[2026-05-03 22:54:07.202] [info] [main.cpp:226] [1934] Starting Elegoo... +[2026-05-03 22:54:07.203] [info] [main.cpp:228] [1934] start_args.size:17,sizeof(long_options):9 +[2026-05-03 22:54:07.203] [info] [main.cpp:231] [1934] start_args[img_version]:00.00.00.00 +[2026-05-03 22:54:07.204] [info] [main.cpp:231] [1934] start_args[gui_version]:01.01.11.03 +[2026-05-03 22:54:07.205] [info] [main.cpp:231] [1934] start_args[elegoo_version]:03.26.17.07 +[2026-05-03 22:54:07.205] [info] [main.cpp:231] [1934] start_args[camera_version]:00.00.00.00 +[2026-05-03 22:54:07.205] [info] [main.cpp:231] [1934] start_args[canvas_version]:00.00.00.00 +[2026-05-03 22:54:07.206] [info] [main.cpp:231] [1934] start_args[ota_version]:01.03.02.36 +[2026-05-03 22:54:07.206] [info] [main.cpp:231] [1934] start_args[bed_sensor_version]:00.00.00.00 +[2026-05-03 22:54:07.207] [info] [main.cpp:231] [1934] start_args[start_reason]:startup +[2026-05-03 22:54:07.207] [info] [main.cpp:231] [1934] start_args[apiserver]:/tmp/elegoo_uds +[2026-05-03 22:54:07.208] [info] [main.cpp:231] [1934] start_args[toolhead_gd32_version]:00.00.00.00 +[2026-05-03 22:54:07.208] [info] [main.cpp:231] [1934] start_args[autosave_file]:/opt/usr/cfg/autosave.cfg +[2026-05-03 22:54:07.209] [info] [main.cpp:231] [1934] start_args[gcode_fd]:4 +[2026-05-03 22:54:07.209] [info] [main.cpp:231] [1934] start_args[config_file]:/opt/inst/printer_dsp.cfg +[2026-05-03 22:54:07.210] [info] [main.cpp:231] [1934] start_args[cpu_info]:2 core ARMv7 Processor rev 5 (v7l) +[2026-05-03 22:54:07.210] [info] [main.cpp:231] [1934] start_args[mcu_gd32_version]:00.00.00.00 +[2026-05-03 22:54:07.210] [info] [main.cpp:231] [1934] start_args[machine_model]:Centauri Carbon 2 +[2026-05-03 22:54:07.210] [info] [main.cpp:231] [1934] start_args[os_version]:01.02.12.01 +[2026-05-03 22:54:07.211] [info] [main.cpp:236] [1934] long_options[debuginput]:i +[2026-05-03 22:54:07.211] [info] [main.cpp:236] [1934] long_options[input-tty]:I +[2026-05-03 22:54:07.211] [info] [main.cpp:236] [1934] long_options[api-server]:a +[2026-05-03 22:54:07.212] [info] [main.cpp:236] [1934] long_options[logfile]:l +[2026-05-03 22:54:07.212] [info] [main.cpp:236] [1934] long_options[verbose]:v +[2026-05-03 22:54:07.212] [info] [main.cpp:236] [1934] long_options[debugoutput]:o +[2026-05-03 22:54:07.213] [info] [main.cpp:236] [1934] long_options[dictionary]:d +[2026-05-03 22:54:07.213] [info] [main.cpp:236] [1934] long_options[import-test]:t +[2026-05-03 22:54:07.214] [info] [printer.cpp:50] [1934] create Printer success! +[2026-05-03 22:54:07.215] [info] [printer.cpp:366] [1934] connect begin! +[2026-05-03 22:54:07.216] [info] [printer.cpp:284] [1934] read_config begin! +[2026-05-03 22:54:07.255] [info] [gcode.cpp:1927] [1944] create DeviceStatusWorker success!! +[2026-05-03 22:54:07.296] [info] [webhooks.cpp:607] [1934] create WebHooks success! +[2026-05-03 22:54:07.297] [info] [webhooks.cpp:384] [1934] create ServerSocket success! /tmp/elegoo_uds +[2026-05-03 22:54:07.297] [info] [webhooks.cpp:443] [1934] create ServerSocket success! +[2026-05-03 22:54:07.300] [info] [webhooks.cpp:1317] [1946] create DeviceExceptWorker success!! +[2026-05-03 22:54:07.651] [info] [config_manager.cpp:171] [1934] begin read sn info +[2026-05-03 22:54:07.651] [info] [config_manager.cpp:205] [1934] read product auth success, sn: F01CFFQQFN55YKS +[2026-05-03 22:54:07.653] [info] [config_manager.cpp:148] [1934] machine: {"machine":{"model":"Centauri Carbon 2"},"versions":[{"os_version":"01.02.12.01"},{"mcu_gd32_version":"00.00.00.00"},{"toolhead_gd32_version":"00.00.00.00"},{"bed_sensor_version":"00.00.00.00"},{"canvas_version":"00.00.00.00"},{"camera_version":"00.00.00.00"},{"elegoo_version":"03.26.17.07"},{"gui_version":"01.01.11.03"},{"ota_version":"01.03.02.36"},{"img_version":"00.00.00.00"}]} +[2026-05-03 22:54:07.654] [info] [config_manager.cpp:209] [1934] begin read supplement info +[2026-05-03 22:54:07.672] [info] [config_manager.cpp:306] [1934] token info: token: miM2yt, token_switch_enabled: true, is_lan_mode: true, power_outage_resume_enabled: true, region: 1 +[2026-05-03 22:54:07.677] [info] [config_manager.cpp:453] [1934] load persistent supplement info success +[2026-05-03 22:54:07.679] [info] [device_status.cpp:133] [1934] Create component manager for Centauri Carbon 2 +[2026-05-03 22:54:07.799] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_details WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_details GROUP BY filename HAVING MAX(create_time)); +[2026-05-03 22:54:07.826] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_thumbnail WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_thumbnail GROUP BY filename); +[2026-05-03 22:54:07.880] [info] [record_manager.cpp:302] [1934] Loaded 3 tasks from the database. +[2026-05-03 22:54:07.880] [info] [record_manager.cpp:307] [1934] end task info id a065d20a-a124-4f32-afca-a3dfb699ae8c name ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode status 2. +[2026-05-03 22:54:07.882] [info] [record_manager.cpp:318] [1934] Loaded 8 files from the database. +[2026-05-03 22:54:07.883] [info] [record_manager.cpp:323] [1934] Loaded 3 thumbnails from the database. +[2026-05-03 22:54:07.884] [info] [record_manager.cpp:328] [1934] Loaded 0 delete file records from the database. +[2026-05-03 22:54:07.884] [info] [sql_database.cpp:417] [1934] Loaded exception message: id 4, code 1263 +[2026-05-03 22:54:07.884] [info] [sql_database.cpp:417] [1934] Loaded exception message: id 3, code 1263 +[2026-05-03 22:54:07.884] [info] [sql_database.cpp:417] [1934] Loaded exception message: id 2, code 801 +[2026-05-03 22:54:07.884] [info] [sql_database.cpp:417] [1934] Loaded exception message: id 1, code 801 +[2026-05-03 22:54:07.885] [info] [record_manager.cpp:333] [1934] Loaded 4 exception messages from the database. +[2026-05-03 22:54:07.886] [info] [record_manager.cpp:827] [1934] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-03 22:54:07.886] [info] [record_manager.cpp:827] [1934] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-03 22:54:07.886] [info] [record_manager.cpp:827] [1934] File exists: /opt/usr/gcode/local/IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-03 22:54:07.889] [info] [record_manager.cpp:831] [1934] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-03 22:54:07.889] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 22:54:07.902] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 22:54:07.903] [info] [record_manager.cpp:344] [1934] check_db_files file[ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode] not exist system, clear it from database +[2026-05-03 22:54:07.904] [info] [record_manager.cpp:831] [1934] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 22:54:07.904] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 22:54:07.916] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 22:54:07.916] [info] [record_manager.cpp:344] [1934] check_db_files file[ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode] not exist system, clear it from database +[2026-05-03 22:54:07.917] [info] [record_manager.cpp:831] [1934] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-03 22:54:07.918] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 22:54:07.930] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 22:54:07.931] [info] [record_manager.cpp:344] [1934] check_db_files file[ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode] not exist system, clear it from database +[2026-05-03 22:54:07.932] [info] [record_manager.cpp:831] [1934] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-03 22:54:07.932] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 22:54:07.943] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 22:54:07.944] [info] [record_manager.cpp:344] [1934] check_db_files file[ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode] not exist system, clear it from database +[2026-05-03 22:54:07.945] [info] [record_manager.cpp:831] [1934] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-03 22:54:07.945] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-03 22:54:07.956] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-03 22:54:07.957] [info] [record_manager.cpp:344] [1934] check_db_files file[ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode] not exist system, clear it from database +[2026-05-03 22:54:07.957] [info] [record_manager.cpp:361] [1934] Local file count 11 does not match cached file details 3, need to parse online files. +[2026-05-03 22:54:07.958] [info] [record_manager.cpp:607] [1934] Parsing local files in /opt/usr/gcode/local/ +[2026-05-03 22:54:07.958] [info] [record_manager.cpp:623] [1934] File ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode already exists in cache, skipping parsing. +[2026-05-03 22:54:07.958] [info] [record_manager.cpp:496] [1934] Parsing local file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-03 22:54:07.958] [error] [record_manager.cpp:32] [1934] stat failed /opt/usr/gcode/local//ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-03 22:54:07.958] [info] [record_manager.cpp:383] [1934] color map size: 0 +[2026-05-03 22:54:07.958] [info] [sql_database.cpp:97] [1934] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 22:54:07.972] [info] [record_manager.cpp:512] [1934] Parsed file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 22:54:07.972] [info] [record_manager.cpp:496] [1934] Parsing local file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 22:54:07.972] [error] [record_manager.cpp:32] [1934] stat failed /opt/usr/gcode/local//ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-03 22:54:07.972] [info] [record_manager.cpp:383] [1934] color map size: 0 +[2026-05-03 22:54:07.972] [info] [sql_database.cpp:97] [1934] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 22:54:07.984] [info] [record_manager.cpp:512] [1934] Parsed file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 22:54:07.984] [info] [record_manager.cpp:496] [1934] Parsing local file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-03 22:54:07.984] [error] [record_manager.cpp:32] [1934] stat failed /opt/usr/gcode/local//ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-03 22:54:07.984] [info] [record_manager.cpp:383] [1934] color map size: 0 +[2026-05-03 22:54:07.985] [info] [sql_database.cpp:97] [1934] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 22:54:07.996] [info] [record_manager.cpp:512] [1934] Parsed file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 22:54:07.996] [info] [record_manager.cpp:496] [1934] Parsing local file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-03 22:54:07.997] [error] [record_manager.cpp:32] [1934] stat failed /opt/usr/gcode/local//ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-03 22:54:07.997] [info] [record_manager.cpp:383] [1934] color map size: 0 +[2026-05-03 22:54:07.997] [info] [sql_database.cpp:97] [1934] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 22:54:08.010] [info] [record_manager.cpp:512] [1934] Parsed file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 22:54:08.011] [info] [record_manager.cpp:496] [1934] Parsing local file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-03 22:54:08.011] [error] [record_manager.cpp:32] [1934] stat failed /opt/usr/gcode/local//ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-03 22:54:08.011] [info] [record_manager.cpp:383] [1934] color map size: 0 +[2026-05-03 22:54:08.011] [info] [sql_database.cpp:97] [1934] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 22:54:08.023] [info] [record_manager.cpp:512] [1934] Parsed file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 22:54:08.023] [info] [record_manager.cpp:496] [1934] Parsing local file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-03 22:54:08.024] [error] [record_manager.cpp:32] [1934] stat failed /opt/usr/gcode/local//ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-03 22:54:08.024] [info] [record_manager.cpp:383] [1934] color map size: 0 +[2026-05-03 22:54:08.025] [info] [sql_database.cpp:97] [1934] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 22:54:08.036] [info] [record_manager.cpp:512] [1934] Parsed file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 22:54:08.036] [info] [record_manager.cpp:623] [1934] File ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode already exists in cache, skipping parsing. +[2026-05-03 22:54:08.036] [info] [record_manager.cpp:496] [1934] Parsing local file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-03 22:54:08.037] [error] [record_manager.cpp:32] [1934] stat failed /opt/usr/gcode/local//ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-03 22:54:08.037] [info] [record_manager.cpp:383] [1934] color map size: 0 +[2026-05-03 22:54:08.037] [info] [sql_database.cpp:97] [1934] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 22:54:08.051] [info] [record_manager.cpp:512] [1934] Parsed file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 22:54:08.051] [info] [record_manager.cpp:623] [1934] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode already exists in cache, skipping parsing. +[2026-05-03 22:54:08.051] [info] [record_manager.cpp:496] [1934] Parsing local file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-03 22:54:08.051] [error] [record_manager.cpp:32] [1934] stat failed /opt/usr/gcode/local//ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-03 22:54:08.051] [info] [record_manager.cpp:383] [1934] color map size: 0 +[2026-05-03 22:54:08.051] [info] [sql_database.cpp:97] [1934] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-03 22:54:08.063] [info] [record_manager.cpp:512] [1934] Parsed file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-03 22:54:08.063] [info] [record_manager.cpp:636] [1934] Finished parsing local files, total: 11 +[2026-05-03 22:54:08.063] [info] [record_manager.cpp:365] [1934] RecordManager initialized successfully. +[2026-05-03 22:54:08.093] [info] [pins.cpp:112] [1934] create PrinterPins success! +[2026-05-03 22:54:08.095] [info] [msgproto.cpp:606] [1934] create MessageParser success! +[2026-05-03 22:54:08.095] [info] [mcu.cpp:1963] [1934] restart_via_remoterpc +[2026-05-03 22:54:08.095] [error] [serialhdl.cpp:309] [1934] SerialReader::disconnect() +[2026-05-03 22:54:08.095] [info] [dsp_helper.h:31] [1934] remoterpc_ctrl 0 +[2026-05-03 22:54:08.096] [info] [webhooks.cpp:56] [1934] webhooks client 27524388: New connection +[2026-05-03 22:54:08.103] [info] [webhooks.cpp:1232] [1934] handle_query is_subscribe true : {"canvas_dev":["fds","canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[2026-05-03 22:54:08.105] [info] [webhooks.cpp:1232] [1934] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[2026-05-03 22:54:08.105] [info] [device_ui_message_handle.cpp:65] [1934] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[2026-05-03 22:54:08.106] [info] [device_ui_message_handle.cpp:503] [1934] Total tasks: 3 +[2026-05-03 22:54:08.107] [info] [webhooks.cpp:799] [1934] return handle_sync_info: {"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3} +[2026-05-03 22:54:08.108] [info] [webhooks.cpp:170] [1934] return total: {"id":5,"method":"sync_info","result":{"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3}} +[2026-05-03 22:54:08.169] [warning] [webhooks.cpp:148] [1934] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 22:54:08.170] [info] [webhooks.cpp:170] [1934] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":7} +[2026-05-03 22:54:08.171] [info] [webhooks.cpp:170] [1934] return total: {"id":9,"result":{}} +[2026-05-03 22:54:08.173] [warning] [webhooks.cpp:148] [1934] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 22:54:08.174] [info] [webhooks.cpp:170] [1934] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":11} +[2026-05-03 22:54:08.174] [info] [device_ui_message_handle.cpp:255] [1934] Handling bind function request {"script":"get_device_info"} +[2026-05-03 22:54:08.175] [info] [webhooks.cpp:768] [1934] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-05-03 22:54:08.175] [info] [webhooks.cpp:170] [1934] return total: {"id":13,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-05-03 22:54:08.176] [info] [device_ui_message_handle.cpp:65] [1934] Handling sync info request {"region_code":1,"script":"set_region"} +[2026-05-03 22:54:08.177] [info] [device_ui_message_handle.cpp:129] [1934] Handling set region request 1 +[2026-05-03 22:54:08.177] [info] [device_ui_message_handle.cpp:132] [1934] Region is the same as current region: 1 +[2026-05-03 22:54:08.177] [info] [webhooks.cpp:799] [1934] return handle_sync_info: {"script":"set_region"} +[2026-05-03 22:54:08.178] [info] [webhooks.cpp:170] [1934] return total: {"id":15,"method":"sync_info","result":{"script":"set_region"}} +[2026-05-03 22:54:08.184] [info] [webhooks.cpp:170] [1934] return total: {"id":3,"result":{"eventtime":22.512905552,"status":null}} +[2026-05-03 22:54:08.186] [warning] [webhooks.cpp:148] [1934] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 22:54:08.186] [info] [webhooks.cpp:170] [1934] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":6} +[2026-05-03 22:54:08.187] [info] [device_ui_message_handle.cpp:321] [1934] Get Network access cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-03 22:54:08.187] [info] [webhooks.cpp:756] [1934] return handle_get_network_access_cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-03 22:54:08.187] [info] [webhooks.cpp:170] [1934] return total: {"id":10,"method":"get_network_access_cfg","result":{"object":{"lan_status":true,"token":"miM2yt","token_status":true}}} +[2026-05-03 22:54:08.189] [info] [device_ui_message_handle.cpp:65] [1934] Handling sync info request {"script":"get_device_status"} +[2026-05-03 22:54:08.189] [info] [device_ui_message_handle.cpp:143] [1934] Handling get device status request +[2026-05-03 22:54:08.190] [info] [device_ui_message_handle.cpp:154] [1934] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-03 22:54:08.190] [info] [webhooks.cpp:799] [1934] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-03 22:54:08.191] [info] [webhooks.cpp:170] [1934] return total: {"id":14,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[2026-05-03 22:54:08.192] [info] [webhooks.cpp:170] [1934] return total: {"id":4,"result":{"eventtime":22.512905552,"status":null}} +[2026-05-03 22:54:08.608] [warning] [webhooks.cpp:148] [1934] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 22:54:08.608] [info] [webhooks.cpp:170] [1934] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":8} +[2026-05-03 22:54:08.609] [info] [device_ui_message_handle.cpp:65] [1934] Handling sync info request {"script":"set_status","status":1,"sub_status":0} +[2026-05-03 22:54:08.609] [info] [device_ui_message_handle.cpp:553] [1934] Setting status: 1, sub_status: 0 +[2026-05-03 22:54:08.609] [info] [device_status.cpp:1204] [1934] Set UI ready: true +[2026-05-03 22:54:08.610] [info] [webhooks.cpp:799] [1934] return handle_sync_info: {"script":"set_status"} +[2026-05-03 22:54:08.610] [info] [webhooks.cpp:170] [1934] return total: {"id":16,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-03 22:54:09.096] [info] [dsp_helper.h:31] [1934] remoterpc_ctrl 1 +[2026-05-03 22:54:09.211] [warning] [webhooks.cpp:148] [1934] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-03 22:54:09.212] [info] [webhooks.cpp:170] [1934] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":12} +[2026-05-03 22:54:10.213] [info] [msgproto.cpp:606] [1934] create MessageParser success! +[2026-05-03 22:54:10.216] [info] [mcu.cpp:1049] [1934] MCU 'bed_sensor' restart power +[2026-05-03 22:54:10.627] [info] [mcu.cpp:1072] [1934] bootloader mode, try jump to app! +[2026-05-03 22:54:10.654] [info] [msgproto.cpp:606] [1934] create MessageParser success! +[2026-05-03 22:54:10.655] [info] [mcu.cpp:1049] [1934] MCU 'toolhead' restart power +[2026-05-03 22:54:11.065] [info] [mcu.cpp:1072] [1934] bootloader mode, try jump to app! +[2026-05-03 22:54:11.229] [info] [bed_mesh.cpp:1466] [1934] zero_ref_pos size 0 +[2026-05-03 22:54:11.340] [info] [bed_mesh.cpp:2722] [1934] ProfileManager profile->get_name bed_mesh +[2026-05-03 22:54:11.341] [info] [bed_mesh.cpp:2722] [1934] ProfileManager profile->get_name bed_mesh ADAPTIVE +[2026-05-03 22:54:11.341] [info] [bed_mesh.cpp:2722] [1934] ProfileManager profile->get_name bed_mesh default +[2026-05-03 22:54:11.346] [info] [gcode_move.cpp:60] [1934] GCodeMove init! +[2026-05-03 22:54:11.387] [info] [gcode_move.cpp:119] [1934] GCodeMove init success!! +[2026-05-03 22:54:11.387] [info] [gcode_move.cpp:274] [1934] set_move_transform transform: force:false +[2026-05-03 22:54:11.425] [info] [print_stats.cpp:26] [1934] PrintStats init! +[2026-05-03 22:54:11.426] [info] [print_stats.cpp:55] [1934] PrintStats init success!! +[2026-05-03 22:54:11.427] [info] [bed_mesh.cpp:463] [1934] update_status bed_mesh_exist:0x0100 +[2026-05-03 22:54:11.427] [info] [print_stats.cpp:277] [1934] bed_mesh_exist:0x0100 +[2026-05-03 22:54:11.427] [warning] [extras_factory.cpp:323] [1934] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-03 22:54:11.427] [warning] [extras_factory.cpp:323] [1934] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-03 22:54:11.482] [info] [beep_ctrl.cpp:39] [1934] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[2026-05-03 22:54:11.485] [info] [beep_ctrl.cpp:147] [1934] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[2026-05-03 22:54:11.485] [info] [beep_ctrl.cpp:262] [1934] exec_cmd data 0 +[2026-05-03 22:54:11.487] [info] [beep_ctrl.cpp:181] [1934] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[2026-05-03 22:54:11.488] [info] [beep_ctrl.cpp:262] [1934] exec_cmd data 333333 +[2026-05-03 22:54:11.488] [info] [beep_ctrl.cpp:199] [1934] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[2026-05-03 22:54:11.488] [info] [beep_ctrl.cpp:262] [1934] exec_cmd data 166666 +[2026-05-03 22:54:11.489] [info] [beep_ctrl.cpp:217] [1934] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[2026-05-03 22:54:11.489] [info] [beep_ctrl.cpp:262] [1934] exec_cmd data normal +[2026-05-03 22:54:11.523] [info] [query_adc.cpp:36] [1934] QueryADC init success! +[2026-05-03 22:54:11.525] [info] [mmu.cpp:1447] [1934] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[2026-05-03 22:54:11.525] [info] [mmu.cpp:1465] [1934] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[2026-05-03 22:54:11.527] [info] [cavity_fan.cpp:27] [1934] PrinterFanCavity init! +[2026-05-03 22:54:11.528] [info] [cavity_fan.cpp:85] [1934] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[2026-05-03 22:54:11.529] [info] [cavity_fan.cpp:96] [1934] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[2026-05-03 22:54:11.529] [info] [cavity_fan.cpp:104] [1934] temp_drop_det_time 60 5 120 1.5 180 +[2026-05-03 22:54:11.582] [info] [fan.cpp:55] [1934] __func__:Fan #1 str_pin:PD17 +[2026-05-03 22:54:11.583] [info] [cavity_fan.cpp:115] [1934] PrinterFanCavity init success!! +[2026-05-03 22:54:11.584] [info] [stepper_enable.cpp:27] [1934] PrinterStepperEnable init! +[2026-05-03 22:54:11.586] [info] [fan.cpp:55] [1934] __func__:Fan #1 str_pin:PG15 +[2026-05-03 22:54:11.589] [info] [fan.cpp:55] [1934] __func__:Fan #1 str_pin:toolhead:PA8 +[2026-05-03 22:54:11.591] [info] [fan.cpp:55] [1934] __func__:Fan #1 str_pin:PD15 +[2026-05-03 22:54:11.598] [info] [exclude_object.cpp:28] [1934] ExcludeObject init! +[2026-05-03 22:54:11.600] [info] [exclude_object.cpp:79] [1934] ExcludeObject init success! +[2026-05-03 22:54:11.607] [warning] [extras_factory.cpp:323] [1934] create extras: "g180_load_config" failer! +[2026-05-03 22:54:11.610] [info] [heater_bed.cpp:18] [1934] PrinterHeaterBed Init! +[2026-05-03 22:54:11.639] [info] [heaters.cpp:873] [1934] PrinterHeaters init! +[2026-05-03 22:54:11.641] [info] [heaters.cpp:898] [1934] PrinterHeaters init success! +[2026-05-03 22:54:11.679] [info] [heaters.cpp:935] [1934] c->get_name(): thermistor NTC 100K beta 3950 +[2026-05-03 22:54:11.680] [info] [thermistor.cpp:138] [1934] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[2026-05-03 22:54:11.681] [info] [heaters.cpp:935] [1934] c->get_name(): thermistor NTC 100K beta 3950 DSP +[2026-05-03 22:54:11.682] [info] [thermistor.cpp:138] [1934] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[2026-05-03 22:54:11.775] [info] [utilities.cpp:52] [1934] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[2026-05-03 22:54:11.777] [info] [thermistor.cpp:146] [1934] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[2026-05-03 22:54:11.777] [info] [heaters.cpp:935] [1934] c->get_name(): thermistor NTC 100K beta 4300 +[2026-05-03 22:54:11.778] [info] [thermistor.cpp:138] [1934] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[2026-05-03 22:54:11.778] [info] [heaters.cpp:935] [1934] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[2026-05-03 22:54:11.779] [info] [thermistor.cpp:138] [1934] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[2026-05-03 22:54:11.779] [info] [heaters.cpp:935] [1934] c->get_name(): thermistor NTC R25 350 +[2026-05-03 22:54:11.780] [info] [thermistor.cpp:138] [1934] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[2026-05-03 22:54:11.780] [info] [heaters.cpp:943] [1934] PrinterHeaters::load_config success! +[2026-05-03 22:54:11.780] [info] [heaters.cpp:1032] [1934] setup_sensor success! +[2026-05-03 22:54:11.780] [info] [adc_temperature.cpp:29] [1934] __func__:PrinterADCtoTemperature name:heater_bed +[2026-05-03 22:54:11.781] [info] [adc_temperature.cpp:35] [1934] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[2026-05-03 22:54:11.781] [info] [adc_temperature.cpp:165] [1934] name:heater_bed +[2026-05-03 22:54:11.782] [info] [error_mcu.cpp:101] [1934] create PrinterMCUError success! +[2026-05-03 22:54:11.783] [info] [heaters.cpp:83] [1934] Heater init! name: heater_bed +[2026-05-03 22:54:11.784] [info] [heaters.cpp:122] [1934] __func__:Heater,heater_pin:PG13 +[2026-05-03 22:54:11.785] [info] [pid_calibrate.cpp:43] [1934] PIDCalibrate init success!! +[2026-05-03 22:54:11.787] [warning] [heaters.cpp:329] [1934] Heater init success!!!! +[2026-05-03 22:54:11.787] [warning] [heaters.cpp:985] [1934] debug name heater_bed, gcode_id B +[2026-05-03 22:54:11.788] [info] [heater_bed.cpp:41] [1934] PrinterHeaterBed Init success! +[2026-05-03 22:54:11.789] [info] [heater_fan.cpp:24] [1934] PrinterHeaterFan init! +[2026-05-03 22:54:11.789] [info] [fan.cpp:55] [1934] __func__:Fan #1 str_pin:toolhead:PB13 +[2026-05-03 22:54:11.790] [info] [heater_fan.cpp:46] [1934] PrinterHeaterFan init success!! +[2026-05-03 22:54:11.794] [info] [idle_timeout.cpp:28] [1934] init IdleTimeout ... +[2026-05-03 22:54:11.795] [info] [idle_timeout.cpp:72] [1934] init IdleTimeout success !!! +[2026-05-03 22:54:11.826] [info] [bulk_sensor.cpp:312] [1934] unpack_fmt:mqtt_strategy_->is_valid(): true +[2026-05-03 22:54:16.349] [info] [mmu.cpp:2093] [1934] {"command":"CANVAS_SOFTWARE_VERSION","result":"00.00.00.44"} +[2026-05-03 22:54:16.350] [info] [gcode.cpp:1940] [1944] update_device_status: {"command":"CANVAS_SOFTWARE_VERSION","result":"00.00.00.44"} +[2026-05-03 22:54:16.893] [info] [mqtt_connector.cpp:498] [1998] Starting heartbeat monitor thread. +[2026-05-03 22:54:16.893] [info] [timer_manager.cpp:72] [1998] Adding timer task: LanMQTTStrategy_heartbeat_monitor, interval: 20000 ms, repeat: true +[2026-05-03 22:54:16.894] [info] [mqtt_connector.cpp:295] [1998] Subscribed to topic: elegoo/F01CFFQQFN55YKS/api_register +[2026-05-03 22:54:17.532] [info] [clocksync.cpp:206] [1988] mcu 'bed_sensor': New minimum RTT: sent_time=31.938924014999998,half_rtt=0.00017281250000245052,freq=119998314.00171466 +[2026-05-03 22:54:17.596] [info] [clocksync.cpp:206] [1993] mcu 'toolhead': New minimum RTT: sent_time=32.002650056,half_rtt=0.00025904199999970956,freq=119998455.9991939 +[2026-05-03 22:54:19.565] [info] [clocksync.cpp:206] [1993] mcu 'toolhead': New minimum RTT: sent_time=33.971257766,half_rtt=0.0002584580000011272,freq=119998142.99990946 +[2026-05-03 22:54:21.534] [info] [clocksync.cpp:206] [1993] mcu 'toolhead': New minimum RTT: sent_time=35.940215140999996,half_rtt=0.00025510450000254536,freq=119998076.03020681 +[2026-05-03 22:54:24.423] [info] [clocksync.cpp:206] [1988] mcu 'bed_sensor': New minimum RTT: sent_time=38.829596143,half_rtt=0.00017097899999996002,freq=119998413.18290527 +[2026-05-03 22:54:31.320] [info] [clocksync.cpp:206] [1988] mcu 'bed_sensor': New minimum RTT: sent_time=45.727135146,half_rtt=0.00016589599999861093,freq=119998474.10027625 +[2026-05-03 22:54:37.273] [info] [clocksync.cpp:206] [1986] mcu 'mcu': New minimum RTT: sent_time=51.681003024,half_rtt=8.904150000077493e-05,freq=24000001.92931324 +[2026-05-03 22:54:41.880] [info] [por.cpp:57] [1934] POR CHARGE DONE! +[2026-05-03 22:54:57.901] [info] [clocksync.cpp:206] [1988] mcu 'bed_sensor': New minimum RTT: sent_time=72.312478284,half_rtt=0.00016506250000247746,freq=119998521.25035177 +[2026-05-04 01:01:59.896] [info] [logger.cpp:80] [1944] elegoo log init finish! +[2026-05-04 01:01:59.995] [info] [main.cpp:209] [1944] inputtty:./config/printer,gcode_fd:4 +[2026-05-04 01:02:00.073] [info] [main.cpp:226] [1944] Starting Elegoo... +[2026-05-04 01:02:00.073] [info] [main.cpp:228] [1944] start_args.size:17,sizeof(long_options):9 +[2026-05-04 01:02:00.073] [info] [main.cpp:231] [1944] start_args[img_version]:00.00.00.00 +[2026-05-04 01:02:00.073] [info] [main.cpp:231] [1944] start_args[gui_version]:01.01.11.03 +[2026-05-04 01:02:00.073] [info] [main.cpp:231] [1944] start_args[elegoo_version]:03.26.17.07 +[2026-05-04 01:02:00.073] [info] [main.cpp:231] [1944] start_args[camera_version]:00.00.00.00 +[2026-05-04 01:02:00.073] [info] [main.cpp:231] [1944] start_args[canvas_version]:00.00.00.00 +[2026-05-04 01:02:00.073] [info] [main.cpp:231] [1944] start_args[ota_version]:01.03.02.36 +[2026-05-04 01:02:00.073] [info] [main.cpp:231] [1944] start_args[bed_sensor_version]:00.00.00.00 +[2026-05-04 01:02:00.073] [info] [main.cpp:231] [1944] start_args[start_reason]:startup +[2026-05-04 01:02:00.073] [info] [main.cpp:231] [1944] start_args[apiserver]:/tmp/elegoo_uds +[2026-05-04 01:02:00.074] [info] [main.cpp:231] [1944] start_args[toolhead_gd32_version]:00.00.00.00 +[2026-05-04 01:02:00.074] [info] [main.cpp:231] [1944] start_args[autosave_file]:/opt/usr/cfg/autosave.cfg +[2026-05-04 01:02:00.074] [info] [main.cpp:231] [1944] start_args[gcode_fd]:4 +[2026-05-04 01:02:00.074] [info] [main.cpp:231] [1944] start_args[config_file]:/opt/inst/printer_dsp.cfg +[2026-05-04 01:02:00.074] [info] [main.cpp:231] [1944] start_args[cpu_info]:2 core ARMv7 Processor rev 5 (v7l) +[2026-05-04 01:02:00.074] [info] [main.cpp:231] [1944] start_args[mcu_gd32_version]:00.00.00.00 +[2026-05-04 01:02:00.074] [info] [main.cpp:231] [1944] start_args[machine_model]:Centauri Carbon 2 +[2026-05-04 01:02:00.074] [info] [main.cpp:231] [1944] start_args[os_version]:01.02.12.01 +[2026-05-04 01:02:00.074] [info] [main.cpp:236] [1944] long_options[debuginput]:i +[2026-05-04 01:02:00.074] [info] [main.cpp:236] [1944] long_options[input-tty]:I +[2026-05-04 01:02:00.074] [info] [main.cpp:236] [1944] long_options[api-server]:a +[2026-05-04 01:02:00.074] [info] [main.cpp:236] [1944] long_options[logfile]:l +[2026-05-04 01:02:00.074] [info] [main.cpp:236] [1944] long_options[verbose]:v +[2026-05-04 01:02:00.074] [info] [main.cpp:236] [1944] long_options[debugoutput]:o +[2026-05-04 01:02:00.074] [info] [main.cpp:236] [1944] long_options[dictionary]:d +[2026-05-04 01:02:00.074] [info] [main.cpp:236] [1944] long_options[import-test]:t +[2026-05-04 01:02:00.075] [info] [printer.cpp:50] [1944] create Printer success! +[2026-05-04 01:02:00.075] [info] [printer.cpp:366] [1944] connect begin! +[2026-05-04 01:02:00.075] [info] [printer.cpp:284] [1944] read_config begin! +[2026-05-04 01:02:00.102] [info] [gcode.cpp:1927] [1954] create DeviceStatusWorker success!! +[2026-05-04 01:02:00.145] [info] [webhooks.cpp:607] [1944] create WebHooks success! +[2026-05-04 01:02:00.146] [info] [webhooks.cpp:384] [1944] create ServerSocket success! /tmp/elegoo_uds +[2026-05-04 01:02:00.146] [info] [webhooks.cpp:443] [1944] create ServerSocket success! +[2026-05-04 01:02:00.147] [info] [webhooks.cpp:1317] [1956] create DeviceExceptWorker success!! +[2026-05-04 01:02:00.444] [info] [config_manager.cpp:171] [1944] begin read sn info +[2026-05-04 01:02:00.444] [info] [config_manager.cpp:205] [1944] read product auth success, sn: F01CFFQQFN55YKS +[2026-05-04 01:02:00.446] [info] [config_manager.cpp:148] [1944] machine: {"machine":{"model":"Centauri Carbon 2"},"versions":[{"os_version":"01.02.12.01"},{"mcu_gd32_version":"00.00.00.00"},{"toolhead_gd32_version":"00.00.00.00"},{"bed_sensor_version":"00.00.00.00"},{"canvas_version":"00.00.00.00"},{"camera_version":"00.00.00.00"},{"elegoo_version":"03.26.17.07"},{"gui_version":"01.01.11.03"},{"ota_version":"01.03.02.36"},{"img_version":"00.00.00.00"}]} +[2026-05-04 01:02:00.447] [info] [config_manager.cpp:209] [1944] begin read supplement info +[2026-05-04 01:02:00.449] [info] [config_manager.cpp:306] [1944] token info: token: miM2yt, token_switch_enabled: true, is_lan_mode: true, power_outage_resume_enabled: true, region: 1 +[2026-05-04 01:02:00.452] [info] [config_manager.cpp:453] [1944] load persistent supplement info success +[2026-05-04 01:02:00.453] [info] [device_status.cpp:133] [1944] Create component manager for Centauri Carbon 2 +[2026-05-04 01:02:00.572] [info] [sql_database.cpp:164] [1944] Delete SQL: DELETE FROM file_details WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_details GROUP BY filename HAVING MAX(create_time)); +[2026-05-04 01:02:00.586] [info] [sql_database.cpp:164] [1944] Delete SQL: DELETE FROM file_thumbnail WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_thumbnail GROUP BY filename); +[2026-05-04 01:02:00.588] [info] [record_manager.cpp:302] [1944] Loaded 3 tasks from the database. +[2026-05-04 01:02:00.588] [info] [record_manager.cpp:307] [1944] end task info id a065d20a-a124-4f32-afca-a3dfb699ae8c name ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode status 2. +[2026-05-04 01:02:00.589] [info] [record_manager.cpp:318] [1944] Loaded 10 files from the database. +[2026-05-04 01:02:00.590] [info] [record_manager.cpp:323] [1944] Loaded 3 thumbnails from the database. +[2026-05-04 01:02:00.591] [info] [record_manager.cpp:328] [1944] Loaded 0 delete file records from the database. +[2026-05-04 01:02:00.591] [info] [sql_database.cpp:417] [1944] Loaded exception message: id 4, code 1263 +[2026-05-04 01:02:00.591] [info] [sql_database.cpp:417] [1944] Loaded exception message: id 3, code 1263 +[2026-05-04 01:02:00.591] [info] [sql_database.cpp:417] [1944] Loaded exception message: id 2, code 801 +[2026-05-04 01:02:00.591] [info] [sql_database.cpp:417] [1944] Loaded exception message: id 1, code 801 +[2026-05-04 01:02:00.592] [info] [record_manager.cpp:333] [1944] Loaded 4 exception messages from the database. +[2026-05-04 01:02:00.592] [info] [record_manager.cpp:827] [1944] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-04 01:02:00.592] [info] [record_manager.cpp:827] [1944] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-04 01:02:00.592] [info] [record_manager.cpp:827] [1944] File exists: /opt/usr/gcode/local/IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-04 01:02:00.594] [info] [record_manager.cpp:831] [1944] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-04 01:02:00.595] [info] [sql_database.cpp:164] [1944] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:02:00.607] [info] [sql_database.cpp:164] [1944] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:02:00.608] [info] [record_manager.cpp:344] [1944] check_db_files file[ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode] not exist system, clear it from database +[2026-05-04 01:02:00.609] [info] [record_manager.cpp:831] [1944] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-04 01:02:00.609] [info] [sql_database.cpp:164] [1944] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:02:00.621] [info] [sql_database.cpp:164] [1944] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:02:00.622] [info] [record_manager.cpp:344] [1944] check_db_files file[ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode] not exist system, clear it from database +[2026-05-04 01:02:00.623] [info] [record_manager.cpp:831] [1944] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-04 01:02:00.623] [info] [sql_database.cpp:164] [1944] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:02:00.634] [info] [sql_database.cpp:164] [1944] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:02:00.635] [info] [record_manager.cpp:344] [1944] check_db_files file[ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode] not exist system, clear it from database +[2026-05-04 01:02:00.636] [info] [record_manager.cpp:831] [1944] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-04 01:02:00.636] [info] [sql_database.cpp:164] [1944] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:02:00.649] [info] [sql_database.cpp:164] [1944] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:02:00.650] [info] [record_manager.cpp:344] [1944] check_db_files file[ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode] not exist system, clear it from database +[2026-05-04 01:02:00.651] [info] [record_manager.cpp:831] [1944] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-04 01:02:00.651] [info] [sql_database.cpp:164] [1944] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:02:00.663] [info] [sql_database.cpp:164] [1944] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:02:00.664] [info] [record_manager.cpp:344] [1944] check_db_files file[ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode] not exist system, clear it from database +[2026-05-04 01:02:00.665] [info] [record_manager.cpp:831] [1944] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-04 01:02:00.665] [info] [sql_database.cpp:164] [1944] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:02:00.678] [info] [sql_database.cpp:164] [1944] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:02:00.679] [info] [record_manager.cpp:344] [1944] check_db_files file[ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode] not exist system, clear it from database +[2026-05-04 01:02:00.680] [info] [record_manager.cpp:831] [1944] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-04 01:02:00.680] [info] [sql_database.cpp:164] [1944] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:02:00.692] [info] [sql_database.cpp:164] [1944] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:02:00.692] [info] [record_manager.cpp:344] [1944] check_db_files file[ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode] not exist system, clear it from database +[2026-05-04 01:02:00.693] [info] [record_manager.cpp:361] [1944] Local file count 11 does not match cached file details 3, need to parse online files. +[2026-05-04 01:02:00.693] [info] [record_manager.cpp:607] [1944] Parsing local files in /opt/usr/gcode/local/ +[2026-05-04 01:02:00.693] [info] [record_manager.cpp:623] [1944] File ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode already exists in cache, skipping parsing. +[2026-05-04 01:02:00.693] [info] [record_manager.cpp:496] [1944] Parsing local file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-04 01:02:00.693] [error] [record_manager.cpp:32] [1944] stat failed /opt/usr/gcode/local//ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-04 01:02:00.693] [info] [record_manager.cpp:383] [1944] color map size: 0 +[2026-05-04 01:02:00.693] [info] [sql_database.cpp:97] [1944] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:02:00.705] [info] [record_manager.cpp:512] [1944] Parsed file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:02:00.705] [info] [record_manager.cpp:496] [1944] Parsing local file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-04 01:02:00.705] [error] [record_manager.cpp:32] [1944] stat failed /opt/usr/gcode/local//ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-04 01:02:00.705] [info] [record_manager.cpp:383] [1944] color map size: 0 +[2026-05-04 01:02:00.705] [info] [sql_database.cpp:97] [1944] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:02:00.718] [info] [record_manager.cpp:512] [1944] Parsed file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:02:00.719] [info] [record_manager.cpp:496] [1944] Parsing local file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-04 01:02:00.719] [error] [record_manager.cpp:32] [1944] stat failed /opt/usr/gcode/local//ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-04 01:02:00.719] [info] [record_manager.cpp:383] [1944] color map size: 0 +[2026-05-04 01:02:00.719] [info] [sql_database.cpp:97] [1944] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:02:00.731] [info] [record_manager.cpp:512] [1944] Parsed file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:02:00.731] [info] [record_manager.cpp:496] [1944] Parsing local file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-04 01:02:00.732] [error] [record_manager.cpp:32] [1944] stat failed /opt/usr/gcode/local//ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-04 01:02:00.732] [info] [record_manager.cpp:383] [1944] color map size: 0 +[2026-05-04 01:02:00.732] [info] [sql_database.cpp:97] [1944] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:02:00.744] [info] [record_manager.cpp:512] [1944] Parsed file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:02:00.744] [info] [record_manager.cpp:496] [1944] Parsing local file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-04 01:02:00.744] [error] [record_manager.cpp:32] [1944] stat failed /opt/usr/gcode/local//ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-04 01:02:00.744] [info] [record_manager.cpp:383] [1944] color map size: 0 +[2026-05-04 01:02:00.744] [info] [sql_database.cpp:97] [1944] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:02:00.757] [info] [record_manager.cpp:512] [1944] Parsed file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:02:00.758] [info] [record_manager.cpp:496] [1944] Parsing local file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-04 01:02:00.758] [error] [record_manager.cpp:32] [1944] stat failed /opt/usr/gcode/local//ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-04 01:02:00.758] [info] [record_manager.cpp:383] [1944] color map size: 0 +[2026-05-04 01:02:00.758] [info] [sql_database.cpp:97] [1944] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:02:00.770] [info] [record_manager.cpp:512] [1944] Parsed file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:02:00.770] [info] [record_manager.cpp:623] [1944] File ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode already exists in cache, skipping parsing. +[2026-05-04 01:02:00.770] [info] [record_manager.cpp:496] [1944] Parsing local file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-04 01:02:00.771] [error] [record_manager.cpp:32] [1944] stat failed /opt/usr/gcode/local//ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-04 01:02:00.771] [info] [record_manager.cpp:383] [1944] color map size: 0 +[2026-05-04 01:02:00.771] [info] [sql_database.cpp:97] [1944] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:02:00.782] [info] [record_manager.cpp:512] [1944] Parsed file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:02:00.783] [info] [record_manager.cpp:623] [1944] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode already exists in cache, skipping parsing. +[2026-05-04 01:02:00.783] [info] [record_manager.cpp:496] [1944] Parsing local file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-04 01:02:00.783] [error] [record_manager.cpp:32] [1944] stat failed /opt/usr/gcode/local//ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-04 01:02:00.783] [info] [record_manager.cpp:383] [1944] color map size: 0 +[2026-05-04 01:02:00.783] [info] [sql_database.cpp:97] [1944] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:02:00.795] [info] [record_manager.cpp:512] [1944] Parsed file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:02:00.795] [info] [record_manager.cpp:636] [1944] Finished parsing local files, total: 11 +[2026-05-04 01:02:00.795] [info] [record_manager.cpp:365] [1944] RecordManager initialized successfully. +[2026-05-04 01:02:00.796] [info] [pins.cpp:112] [1944] create PrinterPins success! +[2026-05-04 01:02:00.826] [info] [msgproto.cpp:606] [1944] create MessageParser success! +[2026-05-04 01:02:00.826] [info] [mcu.cpp:1963] [1944] restart_via_remoterpc +[2026-05-04 01:02:00.826] [error] [serialhdl.cpp:309] [1944] SerialReader::disconnect() +[2026-05-04 01:02:00.826] [info] [dsp_helper.h:31] [1944] remoterpc_ctrl 0 +[2026-05-04 01:02:01.136] [info] [webhooks.cpp:56] [1944] webhooks client 28623468: New connection +[2026-05-04 01:02:01.143] [info] [webhooks.cpp:1232] [1944] handle_query is_subscribe true : {"canvas_dev":["fds","canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[2026-05-04 01:02:01.145] [info] [webhooks.cpp:1232] [1944] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[2026-05-04 01:02:01.145] [info] [device_ui_message_handle.cpp:65] [1944] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[2026-05-04 01:02:01.146] [info] [device_ui_message_handle.cpp:503] [1944] Total tasks: 3 +[2026-05-04 01:02:01.147] [info] [webhooks.cpp:799] [1944] return handle_sync_info: {"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3} +[2026-05-04 01:02:01.148] [info] [webhooks.cpp:170] [1944] return total: {"id":5,"method":"sync_info","result":{"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3}} +[2026-05-04 01:02:01.181] [warning] [webhooks.cpp:148] [1944] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:02:01.181] [info] [webhooks.cpp:170] [1944] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":7} +[2026-05-04 01:02:01.182] [info] [webhooks.cpp:170] [1944] return total: {"id":9,"result":{}} +[2026-05-04 01:02:01.184] [warning] [webhooks.cpp:148] [1944] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:02:01.184] [info] [webhooks.cpp:170] [1944] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":11} +[2026-05-04 01:02:01.185] [info] [device_ui_message_handle.cpp:255] [1944] Handling bind function request {"script":"get_device_info"} +[2026-05-04 01:02:01.186] [info] [webhooks.cpp:768] [1944] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-05-04 01:02:01.186] [info] [webhooks.cpp:170] [1944] return total: {"id":13,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-05-04 01:02:01.186] [info] [device_ui_message_handle.cpp:65] [1944] Handling sync info request {"region_code":1,"script":"set_region"} +[2026-05-04 01:02:01.187] [info] [device_ui_message_handle.cpp:129] [1944] Handling set region request 1 +[2026-05-04 01:02:01.187] [info] [device_ui_message_handle.cpp:132] [1944] Region is the same as current region: 1 +[2026-05-04 01:02:01.187] [info] [webhooks.cpp:799] [1944] return handle_sync_info: {"script":"set_region"} +[2026-05-04 01:02:01.187] [info] [webhooks.cpp:170] [1944] return total: {"id":15,"method":"sync_info","result":{"script":"set_region"}} +[2026-05-04 01:02:01.194] [info] [webhooks.cpp:170] [1944] return total: {"id":3,"result":{"eventtime":23.09623376,"status":null}} +[2026-05-04 01:02:01.196] [warning] [webhooks.cpp:148] [1944] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:02:01.197] [info] [webhooks.cpp:170] [1944] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":6} +[2026-05-04 01:02:01.198] [info] [device_ui_message_handle.cpp:321] [1944] Get Network access cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-04 01:02:01.198] [info] [webhooks.cpp:756] [1944] return handle_get_network_access_cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-04 01:02:01.198] [info] [webhooks.cpp:170] [1944] return total: {"id":10,"method":"get_network_access_cfg","result":{"object":{"lan_status":true,"token":"miM2yt","token_status":true}}} +[2026-05-04 01:02:01.199] [info] [device_ui_message_handle.cpp:65] [1944] Handling sync info request {"script":"get_device_status"} +[2026-05-04 01:02:01.200] [info] [device_ui_message_handle.cpp:143] [1944] Handling get device status request +[2026-05-04 01:02:01.201] [info] [device_ui_message_handle.cpp:154] [1944] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-04 01:02:01.201] [info] [webhooks.cpp:799] [1944] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-04 01:02:01.201] [info] [webhooks.cpp:170] [1944] return total: {"id":14,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[2026-05-04 01:02:01.203] [info] [webhooks.cpp:170] [1944] return total: {"id":4,"result":{"eventtime":23.09623376,"status":null}} +[2026-05-04 01:02:01.647] [warning] [webhooks.cpp:148] [1944] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:02:01.648] [info] [webhooks.cpp:170] [1944] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":8} +[2026-05-04 01:02:01.649] [info] [device_ui_message_handle.cpp:65] [1944] Handling sync info request {"script":"set_status","status":1,"sub_status":0} +[2026-05-04 01:02:01.649] [info] [device_ui_message_handle.cpp:553] [1944] Setting status: 1, sub_status: 0 +[2026-05-04 01:02:01.649] [info] [device_status.cpp:1204] [1944] Set UI ready: true +[2026-05-04 01:02:01.649] [info] [webhooks.cpp:799] [1944] return handle_sync_info: {"script":"set_status"} +[2026-05-04 01:02:01.650] [info] [webhooks.cpp:170] [1944] return total: {"id":16,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-04 01:02:01.828] [info] [dsp_helper.h:31] [1944] remoterpc_ctrl 1 +[2026-05-04 01:02:01.945] [warning] [webhooks.cpp:148] [1944] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:02:01.946] [info] [webhooks.cpp:170] [1944] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":12} +[2026-05-04 01:02:02.947] [info] [msgproto.cpp:606] [1944] create MessageParser success! +[2026-05-04 01:02:02.950] [info] [mcu.cpp:1049] [1944] MCU 'bed_sensor' restart power +[2026-05-04 01:02:03.360] [info] [mcu.cpp:1072] [1944] bootloader mode, try jump to app! +[2026-05-04 01:02:03.391] [info] [msgproto.cpp:606] [1944] create MessageParser success! +[2026-05-04 01:02:03.393] [info] [mcu.cpp:1049] [1944] MCU 'toolhead' restart power +[2026-05-04 01:02:03.802] [info] [mcu.cpp:1072] [1944] bootloader mode, try jump to app! +[2026-05-04 01:02:03.942] [info] [bed_mesh.cpp:1466] [1944] zero_ref_pos size 0 +[2026-05-04 01:02:04.017] [info] [bed_mesh.cpp:2722] [1944] ProfileManager profile->get_name bed_mesh +[2026-05-04 01:02:04.018] [info] [bed_mesh.cpp:2722] [1944] ProfileManager profile->get_name bed_mesh ADAPTIVE +[2026-05-04 01:02:04.018] [info] [bed_mesh.cpp:2722] [1944] ProfileManager profile->get_name bed_mesh default +[2026-05-04 01:02:04.061] [info] [gcode_move.cpp:60] [1944] GCodeMove init! +[2026-05-04 01:02:04.106] [info] [gcode_move.cpp:119] [1944] GCodeMove init success!! +[2026-05-04 01:02:04.107] [info] [gcode_move.cpp:274] [1944] set_move_transform transform: force:false +[2026-05-04 01:02:04.145] [info] [print_stats.cpp:26] [1944] PrintStats init! +[2026-05-04 01:02:04.147] [info] [print_stats.cpp:55] [1944] PrintStats init success!! +[2026-05-04 01:02:04.147] [info] [bed_mesh.cpp:463] [1944] update_status bed_mesh_exist:0x0100 +[2026-05-04 01:02:04.147] [info] [print_stats.cpp:277] [1944] bed_mesh_exist:0x0100 +[2026-05-04 01:02:04.148] [warning] [extras_factory.cpp:323] [1944] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-04 01:02:04.148] [warning] [extras_factory.cpp:323] [1944] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-04 01:02:04.202] [info] [beep_ctrl.cpp:39] [1944] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[2026-05-04 01:02:04.204] [info] [beep_ctrl.cpp:147] [1944] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[2026-05-04 01:02:04.205] [info] [beep_ctrl.cpp:262] [1944] exec_cmd data 0 +[2026-05-04 01:02:04.205] [info] [beep_ctrl.cpp:181] [1944] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[2026-05-04 01:02:04.206] [info] [beep_ctrl.cpp:262] [1944] exec_cmd data 333333 +[2026-05-04 01:02:04.206] [info] [beep_ctrl.cpp:199] [1944] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[2026-05-04 01:02:04.206] [info] [beep_ctrl.cpp:262] [1944] exec_cmd data 166666 +[2026-05-04 01:02:04.206] [info] [beep_ctrl.cpp:217] [1944] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[2026-05-04 01:02:04.207] [info] [beep_ctrl.cpp:262] [1944] exec_cmd data normal +[2026-05-04 01:02:04.240] [info] [query_adc.cpp:36] [1944] QueryADC init success! +[2026-05-04 01:02:04.241] [info] [mmu.cpp:1447] [1944] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[2026-05-04 01:02:04.242] [info] [mmu.cpp:1465] [1944] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[2026-05-04 01:02:04.244] [info] [cavity_fan.cpp:27] [1944] PrinterFanCavity init! +[2026-05-04 01:02:04.245] [info] [cavity_fan.cpp:85] [1944] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[2026-05-04 01:02:04.245] [info] [cavity_fan.cpp:96] [1944] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[2026-05-04 01:02:04.245] [info] [cavity_fan.cpp:104] [1944] temp_drop_det_time 60 5 120 1.5 180 +[2026-05-04 01:02:04.296] [info] [fan.cpp:55] [1944] __func__:Fan #1 str_pin:PD17 +[2026-05-04 01:02:04.297] [info] [cavity_fan.cpp:115] [1944] PrinterFanCavity init success!! +[2026-05-04 01:02:04.298] [info] [stepper_enable.cpp:27] [1944] PrinterStepperEnable init! +[2026-05-04 01:02:04.300] [info] [fan.cpp:55] [1944] __func__:Fan #1 str_pin:PG15 +[2026-05-04 01:02:04.302] [info] [fan.cpp:55] [1944] __func__:Fan #1 str_pin:toolhead:PA8 +[2026-05-04 01:02:04.305] [info] [fan.cpp:55] [1944] __func__:Fan #1 str_pin:PD15 +[2026-05-04 01:02:04.312] [info] [exclude_object.cpp:28] [1944] ExcludeObject init! +[2026-05-04 01:02:04.314] [info] [exclude_object.cpp:79] [1944] ExcludeObject init success! +[2026-05-04 01:02:04.320] [warning] [extras_factory.cpp:323] [1944] create extras: "g180_load_config" failer! +[2026-05-04 01:02:04.322] [info] [heater_bed.cpp:18] [1944] PrinterHeaterBed Init! +[2026-05-04 01:02:04.349] [info] [heaters.cpp:873] [1944] PrinterHeaters init! +[2026-05-04 01:02:04.352] [info] [heaters.cpp:898] [1944] PrinterHeaters init success! +[2026-05-04 01:02:04.367] [info] [heaters.cpp:935] [1944] c->get_name(): thermistor NTC 100K beta 3950 +[2026-05-04 01:02:04.368] [info] [thermistor.cpp:138] [1944] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[2026-05-04 01:02:04.368] [info] [heaters.cpp:935] [1944] c->get_name(): thermistor NTC 100K beta 3950 DSP +[2026-05-04 01:02:04.369] [info] [thermistor.cpp:138] [1944] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[2026-05-04 01:02:04.487] [info] [utilities.cpp:52] [1944] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[2026-05-04 01:02:04.489] [info] [thermistor.cpp:146] [1944] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[2026-05-04 01:02:04.489] [info] [heaters.cpp:935] [1944] c->get_name(): thermistor NTC 100K beta 4300 +[2026-05-04 01:02:04.490] [info] [thermistor.cpp:138] [1944] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[2026-05-04 01:02:04.491] [info] [heaters.cpp:935] [1944] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[2026-05-04 01:02:04.491] [info] [thermistor.cpp:138] [1944] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[2026-05-04 01:02:04.491] [info] [heaters.cpp:935] [1944] c->get_name(): thermistor NTC R25 350 +[2026-05-04 01:02:04.492] [info] [thermistor.cpp:138] [1944] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[2026-05-04 01:02:04.493] [info] [heaters.cpp:943] [1944] PrinterHeaters::load_config success! +[2026-05-04 01:02:04.493] [info] [heaters.cpp:1032] [1944] setup_sensor success! +[2026-05-04 01:02:04.493] [info] [adc_temperature.cpp:29] [1944] __func__:PrinterADCtoTemperature name:heater_bed +[2026-05-04 01:02:04.494] [info] [adc_temperature.cpp:35] [1944] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[2026-05-04 01:02:04.494] [info] [adc_temperature.cpp:165] [1944] name:heater_bed +[2026-05-04 01:02:04.495] [info] [error_mcu.cpp:101] [1944] create PrinterMCUError success! +[2026-05-04 01:02:04.496] [info] [heaters.cpp:83] [1944] Heater init! name: heater_bed +[2026-05-04 01:02:04.496] [info] [heaters.cpp:122] [1944] __func__:Heater,heater_pin:PG13 +[2026-05-04 01:02:04.498] [info] [pid_calibrate.cpp:43] [1944] PIDCalibrate init success!! +[2026-05-04 01:02:04.499] [warning] [heaters.cpp:329] [1944] Heater init success!!!! +[2026-05-04 01:02:04.499] [warning] [heaters.cpp:985] [1944] debug name heater_bed, gcode_id B +[2026-05-04 01:02:04.501] [info] [heater_bed.cpp:41] [1944] PrinterHeaterBed Init success! +[2026-05-04 01:02:04.501] [info] [heater_fan.cpp:24] [1944] PrinterHeaterFan init! +[2026-05-04 01:02:04.502] [info] [fan.cpp:55] [1944] __func__:Fan #1 str_pin:toolhead:PB13 +[2026-05-04 01:02:04.503] [info] [heater_fan.cpp:46] [1944] PrinterHeaterFan init success!! +[2026-05-04 01:02:04.506] [info] [idle_timeout.cpp:28] [1944] init IdleTimeout ... +[2026-05-04 01:02:04.508] [info] [idle_timeout.cpp:72] [1944] init IdleTimeout success !!! +[2026-05-04 01:02:04.540] [info] [bulk_sensor.cpp:312] [1944] unpack_fmt:mqtt_strategy_->is_valid(): true +[2026-05-04 01:02:08.774] [info] [webhooks.cpp:1232] [1944] handle_query is_subscribe true : {"canvas_dev":["fds","canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[2026-05-04 01:02:08.781] [info] [webhooks.cpp:1232] [1944] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[2026-05-04 01:02:08.783] [info] [device_ui_message_handle.cpp:65] [1944] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[2026-05-04 01:02:08.783] [info] [device_ui_message_handle.cpp:503] [1944] Total tasks: 3 +[2026-05-04 01:02:08.784] [info] [webhooks.cpp:799] [1944] return handle_sync_info: {"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3} +[2026-05-04 01:02:08.785] [info] [webhooks.cpp:170] [1944] return total: {"id":19,"method":"sync_info","result":{"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3}} +[2026-05-04 01:02:08.787] [info] [beep_ctrl.cpp:131] [1944] cmd_SET_BEEP_ENABLE beep_enabled false +[2026-05-04 01:02:08.787] [info] [webhooks.cpp:170] [1944] return total: {"id":21,"result":{}} +[2026-05-04 01:02:08.788] [info] [webhooks.cpp:170] [1944] return total: {"id":23,"result":{}} +[2026-05-04 01:02:08.789] [info] [filament_motion_sensor.cpp:146] [1944] CMD_encoder_sensor_switch:true +[2026-05-04 01:02:08.789] [info] [webhooks.cpp:170] [1944] return total: {"id":25,"result":{}} +[2026-05-04 01:02:08.790] [info] [device_ui_message_handle.cpp:255] [1944] Handling bind function request {"script":"get_device_info"} +[2026-05-04 01:02:08.791] [info] [webhooks.cpp:768] [1944] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-05-04 01:02:08.791] [info] [webhooks.cpp:170] [1944] return total: {"id":27,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-05-04 01:02:08.792] [info] [device_ui_message_handle.cpp:65] [1944] Handling sync info request {"region_code":1,"script":"set_region"} +[2026-05-04 01:02:08.792] [info] [device_ui_message_handle.cpp:129] [1944] Handling set region request 1 +[2026-05-04 01:02:08.792] [info] [device_ui_message_handle.cpp:132] [1944] Region is the same as current region: 1 +[2026-05-04 01:02:08.793] [info] [webhooks.cpp:799] [1944] return handle_sync_info: {"script":"set_region"} +[2026-05-04 01:02:08.793] [info] [webhooks.cpp:170] [1944] return total: {"id":29,"method":"sync_info","result":{"script":"set_region"}} +[2026-05-04 01:02:08.797] [info] [filament_switch_sensor.cpp:337] [1944] cmd_SET_FILAMENT_SENSOR:1 +[2026-05-04 01:02:08.797] [info] [webhooks.cpp:170] [1944] return total: {"id":20,"result":{}} +[2026-05-04 01:02:08.798] [info] [device_ui_message_handle.cpp:321] [1944] Get Network access cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-04 01:02:08.798] [info] [webhooks.cpp:756] [1944] return handle_get_network_access_cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-04 01:02:08.799] [info] [webhooks.cpp:170] [1944] return total: {"id":24,"method":"get_network_access_cfg","result":{"object":{"lan_status":true,"token":"miM2yt","token_status":true}}} +[2026-05-04 01:02:08.799] [info] [device_ui_message_handle.cpp:65] [1944] Handling sync info request {"script":"get_device_status"} +[2026-05-04 01:02:08.800] [info] [device_ui_message_handle.cpp:143] [1944] Handling get device status request +[2026-05-04 01:02:08.800] [info] [device_ui_message_handle.cpp:154] [1944] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-04 01:02:08.801] [info] [webhooks.cpp:799] [1944] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-04 01:02:08.801] [info] [webhooks.cpp:170] [1944] return total: {"id":28,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[2026-05-04 01:02:08.807] [info] [output_pin.cpp:189] [1944] cmd_SET_PIN : 189___ +[2026-05-04 01:02:08.807] [info] [output_pin.cpp:200] [1944] cmd_SET_PIN : 200___value:1,scale:1,cfgname:output_pin led_pin +[2026-05-04 01:02:08.807] [info] [mcu.cpp:712] [1944] set_digital pin PB5 7.0266265416666664 30.758902222 +[2026-05-04 01:02:08.809] [info] [webhooks.cpp:170] [1944] return total: {"id":22,"result":{}} +[2026-05-04 01:02:08.810] [info] [device_ui_message_handle.cpp:65] [1944] Handling sync info request {"script":"set_status","status":1,"sub_status":0} +[2026-05-04 01:02:08.810] [info] [device_ui_message_handle.cpp:553] [1944] Setting status: 1, sub_status: 0 +[2026-05-04 01:02:08.811] [info] [device_status.cpp:1204] [1944] Set UI ready: true +[2026-05-04 01:02:08.811] [info] [device_status.cpp:1207] [1944] UI is ready, set machine status to IDLE +[2026-05-04 01:02:08.811] [info] [webhooks.cpp:799] [1944] return handle_sync_info: {"script":"set_status"} +[2026-05-04 01:02:08.811] [info] [webhooks.cpp:170] [1944] return total: {"id":30,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-04 01:02:08.817] [info] [webhooks.cpp:170] [1944] return total: {"id":26,"result":{}} +[2026-05-04 01:02:08.956] [info] [webhooks.cpp:170] [1944] return total: {"id":17,"result":{"eventtime":30.882533764,"status":{"canvas_dev":{"canvas_lite":{"channels0":{"cid":0,"filament":{"brand":"0xEEEEEEEE","code":"0x0000","color":"0x000000","date":"2502","detailed_type":"PLA","diameter":"1.75","manufacturer":"Generic","nozzle_max_temp":"230℃","nozzle_min_temp":"190℃","type":"PLA","weight":"1000"},"status":1},"channels1":{"cid":1,"filament":{"brand":"0xEEEEEEEE","code":"0x0000","color":"0xFFFFFF","date":"2502","detailed_type":"PLA","diameter":"1.75","manufacturer":"Generic","nozzle_max_temp":"230℃","nozzle_min_temp":"190℃","type":"PLA","weight":"1000"},"status":1},"channels2":{"cid":2,"filament":{"brand":"","code":"","color":"","date":"","detailed_type":"","diameter":"","manufacturer":"","nozzle_max_temp":"","nozzle_min_temp":"","type":"","weight":""},"status":0},"channels3":{"cid":3,"filament":{"brand":"","code":"","color":"","date":"","detailed_type":"","diameter":"","manufacturer":"","nozzle_max_temp":"","nozzle_min_temp":"","type":"","weight":""},"status":0},"connected":1,"did":0,"extern_channel":{"filament":{"brand":"0xEEEEEEEE","code":"0x0001","color":"0xFFFFFF","date":"","detailed_type":"PLA","diameter":"1.75","manufacturer":"ELEGOO","nozzle_max_temp":"250.0","nozzle_min_temp":"170.0","type":"PLA","weight":"1000"},"status":0}},"fds":{"connected":0,"dragging":0,"fila_in":0}},"cavity_fan":{"rpm":0.0,"speed":0.0},"controller_fan board_cooling_fan":{"rpm":0.0,"speed":0.0},"extruder":{"target":0.0,"temperature":23.89},"fan":{"rpm":0.0,"speed":0.0},"fan_generic fan1":{"rpm":0.0,"speed":0.0},"gcode_move":{"speed":1500.0,"speed_factor":1.0},"heater_bed":{"target":0.0,"temperature":22.29},"heater_fan heatbreak_cooling_fan":{"rpm":0.0,"speed":0.0},"pause_resume":{"is_paused":false},"print_stats":{"auto_plug_in_filament":null,"bed_mesh_detected":256,"beep_enabled":false,"canvas_runout_filament":null,"cavity_temperature_mode":0,"enabled":1,"filament_detected":true,"filename":"","info":{"current_layer":0,"total_layer":null},"machine_status":1,"machine_sub_status":0,"print_duration":0.0,"state":"standby","total_duration":0.0},"toolhead":{"homed_axes":""},"virtual_sdcard":{"progress":0.0},"ztemperature_sensor box":{"measured_max_temp":21.63,"measured_min_temp":21.62,"temperature":21.62}}}} +[2026-05-04 01:02:08.959] [info] [webhooks.cpp:170] [1944] return total: {"id":18,"result":{"eventtime":30.882533764,"status":null}} +[2026-05-04 01:02:09.069] [info] [mmu.cpp:2093] [1944] {"command":"CANVAS_SOFTWARE_VERSION","result":"00.00.00.44"} +[2026-05-04 01:02:09.070] [info] [gcode.cpp:1940] [1954] update_device_status: {"command":"CANVAS_SOFTWARE_VERSION","result":"00.00.00.44"} +[2026-05-04 01:02:09.354] [warning] [clocksync.cpp:181] [1944] queries_pending 2 +[2026-05-04 01:02:09.551] [info] [mqtt_connector.cpp:498] [2008] Starting heartbeat monitor thread. +[2026-05-04 01:02:09.551] [info] [timer_manager.cpp:72] [2008] Adding timer task: LanMQTTStrategy_heartbeat_monitor, interval: 20000 ms, repeat: true +[2026-05-04 01:02:09.551] [info] [mqtt_connector.cpp:295] [2008] Subscribed to topic: elegoo/F01CFFQQFN55YKS/api_register +[2026-05-04 01:02:10.284] [info] [clocksync.cpp:206] [2004] mcu 'toolhead': New minimum RTT: sent_time=32.234872681,half_rtt=0.0002598545000012109,freq=119999017.21758933 +[2026-05-04 01:02:12.199] [info] [clocksync.cpp:206] [1998] mcu 'bed_sensor': New minimum RTT: sent_time=34.150092641,half_rtt=0.00016845800000098166,freq=119998537.46932386 +[2026-05-04 01:02:14.167] [info] [clocksync.cpp:206] [1998] mcu 'bed_sensor': New minimum RTT: sent_time=36.118399933,half_rtt=0.00016814600000003566,freq=119998599.4325944 +[2026-05-04 01:02:17.175] [info] [clocksync.cpp:206] [2004] mcu 'toolhead': New minimum RTT: sent_time=39.126891850999996,half_rtt=0.00025720850000254813,freq=119998501.53973159 +[2026-05-04 01:02:18.105] [info] [clocksync.cpp:206] [1998] mcu 'bed_sensor': New minimum RTT: sent_time=40.056668852,half_rtt=0.00016179149999828724,freq=119998690.83295721 +[2026-05-04 01:02:26.035] [info] [clocksync.cpp:206] [2004] mcu 'toolhead': New minimum RTT: sent_time=47.986943896999996,half_rtt=0.00025618750000333534,freq=119998631.40379478 +[2026-05-04 01:02:28.004] [info] [clocksync.cpp:206] [2004] mcu 'toolhead': New minimum RTT: sent_time=49.956361815,half_rtt=0.00025493749999938586,freq=119998599.32126117 +[2026-05-04 01:02:34.593] [info] [por.cpp:57] [1944] POR CHARGE DONE! +[2026-05-04 01:03:25.114] [info] [clocksync.cpp:206] [2004] mcu 'toolhead': New minimum RTT: sent_time=107.06847500900001,half_rtt=0.00025385399999322544,freq=119998571.48568584 +[2026-05-04 01:04:02.234] [info] [heaters.cpp:423] [1995] __func__:temperature_callback,heater_name:heater_bed,read_time:120.27800000037998,last_temp:22.30466139339711,temp:22.30466139339711,target_temp:0,smoothed_temp:22.301662207293937 +[2026-05-04 01:04:08.376] [info] [heaters.cpp:423] [2004] __func__:temperature_callback,heater_name:extruder,read_time:126.41949025050425,last_temp:24.43035950800345,temp:24.43035950800345,target_temp:0,smoothed_temp:24.491100995152237 +[2026-05-04 01:04:29.916] [error] [main.cpp:102] [2003] Got error -1 in read: (11)Resource temporarily unavailable +[2026-05-04 01:04:30.033] [warning] [clocksync.cpp:181] [1944] queries_pending 2 +[2026-05-04 01:04:31.018] [warning] [clocksync.cpp:181] [1944] queries_pending 3 +[2026-05-04 01:04:31.080] [warning] [clocksync.cpp:181] [1944] queries_pending 2 +[2026-05-04 01:04:32.002] [warning] [clocksync.cpp:181] [1944] queries_pending 4 +[2026-05-04 01:04:32.064] [warning] [clocksync.cpp:181] [1944] queries_pending 3 +[2026-05-04 01:04:32.678] [info] [mmu.cpp:2143] [2015] Canvas device lost +[2026-05-04 01:04:32.987] [warning] [clocksync.cpp:181] [1944] queries_pending 5 +[2026-05-04 01:04:33.049] [warning] [clocksync.cpp:181] [1944] queries_pending 4 +[2026-05-04 01:04:33.158] [warning] [mcu.cpp:1363] [1944] Timeout with MCU bed_sensor eventtime: 175.110045958 +[2026-05-04 01:04:33.158] [info] [printer.cpp:231] [1944] msg:Lost communication with MCU 'bed_sensor' in_shutdown_state:false +[2026-05-04 01:04:33.159] [info] [gcode.cpp:553] [1944] respond_ecode: , error_code: 802 error_level 1 +[2026-05-04 01:04:33.159] [info] [webhooks.cpp:1333] [1956] update_except_status error_code: 802 error_level: 1 +[2026-05-04 01:04:33.160] [info] [device_status.cpp:1080] [1956] Add exception code: 802 +[2026-05-04 01:04:33.160] [info] [sql_database.cpp:97] [1956] Insert SQL: INSERT INTO exception_message (code, timestamp, level, upload_flag) VALUES (?, ?, ?, ?); +[2026-05-04 01:04:33.162] [info] [webhooks.cpp:505] [1944] handle_shutdown : 505___ ok +[2026-05-04 01:04:33.162] [warning] [gcode_move.cpp:885] [1944] gcode state: absolute_coord=1 absolute_extrude=1 base_position=(0.000000 0.000000 0.000000 0.000000) last_position=(5.000000 5.000000 -0.119271 0.000000) homing_position=(0.000000 0.000000 0.000000 0.000000) speed_factor=0.000000 extrude_factor=0.016667 speed=1.000000 + +[2026-05-04 01:04:33.163] [info] [heaters.cpp:579] [1944] handle_shutdown : 579___ ok +[2026-05-04 01:04:33.163] [info] [virtual_sdcard.cpp:335] [1944] start saving supplement info. +[2026-05-04 01:04:33.165] [info] [serialhdl.cpp:502] [1995] mcu 'mcu': got handle_output name: #output message: command_emergency_stop: shutdown Command request +[2026-05-04 01:04:33.165] [info] [serialhdl.cpp:502] [1995] mcu 'mcu': got handle_output name: #output message: analog_in_shutdown oid 27 ev1 0 ev2 0 st 9 sc 8 +[2026-05-04 01:04:33.166] [info] [serialhdl.cpp:502] [1995] mcu 'mcu': got handle_output name: #output message: analog_in_shutdown oid 34 ev1 0 ev2 0 st 9 sc 8 +[2026-05-04 01:04:33.166] [warning] [serialhdl.cpp:553] [1995] response->len:12,params['clock']:3628912057,params['static_string_id']:17 mcu mcu 'mcu': shutdown! +[2026-05-04 01:04:33.167] [error] [mcu.cpp:1488] [1995] mcu mcu clock32 3628912057 clock64 3628912057 shutdown id 17 msg Command request +[2026-05-04 01:04:33.167] [info] [config_manager.cpp:350] [1944] save supplement info success +[2026-05-04 01:04:33.193] [error] [mcu.cpp:1496] [1995] MCU 'mcu' shutdown: Command request +clocksync state: mcu_freq=24000000 last_clock=3627496760 clock_est=(146.680092 2946426768 23999999.444507) min_half_rtt=0.000074 min_rtt_time=29.337248 time_avg=146.680018(791.663261) clock_avg=2946426768.629605(18999917823.740841) pred_variance=2652244.859372 +Dumping serial stats: bytes_write=3233 bytes_read=22289 bytes_retransmit=0 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 +Dumping send queue 100 messages +Sent 0 78.569075 78.569075 6: seq: 13, get_clock +Sent 1 79.553139 79.553139 6: seq: 14, get_clock +Sent 2 80.538076 80.538076 6: seq: 15, get_clock +Sent 3 81.523047 81.523047 6: seq: 16, get_clock +Sent 4 82.507882 82.507882 6: seq: 17, get_clock +Sent 5 83.492513 83.492513 6: seq: 18, get_clock +Sent 6 84.476618 84.476618 6: seq: 19, get_clock +Sent 7 85.460556 85.460556 6: seq: 1a, get_clock +Sent 8 86.445457 86.445457 6: seq: 1b, get_clock +Sent 9 87.430005 87.430005 6: seq: 1c, get_clock +Sent 10 88.414746 88.414746 6: seq: 1d, get_clock +Sent 11 89.399412 89.399412 6: seq: 1e, get_clock +Sent 12 90.383792 90.383792 6: seq: 1f, get_clock +Sent 13 91.368660 91.368660 6: seq: 10, get_clock +Sent 14 92.353130 92.353130 6: seq: 11, get_clock +Sent 15 93.337965 93.337965 6: seq: 12, get_clock +Sent 16 94.322654 94.322654 6: seq: 13, get_clock +Sent 17 95.307116 95.307116 6: seq: 14, get_clock +Sent 18 96.291900 96.291900 6: seq: 15, get_clock +Sent 19 97.276409 97.276409 6: seq: 16, get_clock +Sent 20 98.261489 98.261489 6: seq: 17, get_clock +Sent 21 99.246139 99.246139 6: seq: 18, get_clock +Sent 22 100.230343 100.230343 6: seq: 19, get_clock +Sent 23 101.214673 101.214673 6: seq: 1a, get_clock +Sent 24 102.198764 102.198764 6: seq: 1b, get_clock +Sent 25 103.183092 103.183092 6: seq: 1c, get_clock +Sent 26 104.167176 104.167176 6: seq: 1d, get_clock +Sent 27 105.151418 105.151418 6: seq: 1e, get_clock +Sent 28 106.135741 106.135741 6: seq: 1f, get_clock +Sent 29 107.120355 107.120355 6: seq: 10, get_clock +Sent 30 108.104648 108.104648 6: seq: 11, get_clock +Sent 31 109.089003 109.089003 6: seq: 12, get_clock +Sent 32 110.075173 110.075173 6: seq: 13, get_clock +Sent 33 111.059238 111.059238 6: seq: 14, get_clock +Sent 34 112.043429 112.043429 6: seq: 15, get_clock +Sent 35 113.028056 113.028056 6: seq: 16, get_clock +Sent 36 114.012044 114.012044 6: seq: 17, get_clock +Sent 37 114.996875 114.996875 6: seq: 18, get_clock +Sent 38 115.981488 115.981488 6: seq: 19, get_clock +Sent 39 116.965823 116.965823 6: seq: 1a, get_clock +Sent 40 117.950618 117.950618 6: seq: 1b, get_clock +Sent 41 118.935316 118.935316 6: seq: 1c, get_clock +Sent 42 119.919849 119.919849 6: seq: 1d, get_clock +Sent 43 120.904319 120.904319 6: seq: 1e, get_clock +Sent 44 121.888865 121.888865 6: seq: 1f, get_clock +Sent 45 122.873765 122.873765 6: seq: 10, get_clock +Sent 46 123.857736 123.857736 6: seq: 11, get_clock +Sent 47 124.842339 124.842339 6: seq: 12, get_clock +Sent 48 125.826773 125.826773 6: seq: 13, get_clock +Sent 49 126.810973 126.810973 6: seq: 14, get_clock +Sent 50 127.795233 127.795233 6: seq: 15, get_clock +Sent 51 128.779484 128.779484 6: seq: 16, get_clock +Sent 52 129.764196 129.764196 6: seq: 17, get_clock +Sent 53 130.748850 130.748850 6: seq: 18, get_clock +Sent 54 131.733021 131.733021 6: seq: 19, get_clock +Sent 55 132.717751 132.717751 6: seq: 1a, get_clock +Sent 56 133.702058 133.702058 6: seq: 1b, get_clock +Sent 57 134.686154 134.686154 6: seq: 1c, get_clock +Sent 58 135.671125 135.671125 6: seq: 1d, get_clock +Sent 59 136.655894 136.655894 6: seq: 1e, get_clock +Sent 60 137.640435 137.640435 6: seq: 1f, get_clock +Sent 61 138.624657 138.624657 6: seq: 10, get_clock +Sent 62 139.608782 139.608782 6: seq: 11, get_clock +Sent 63 140.593249 140.593249 6: seq: 12, get_clock +Sent 64 141.578104 141.578104 6: seq: 13, get_clock +Sent 65 142.562679 142.562679 6: seq: 14, get_clock +Sent 66 143.547193 143.547193 6: seq: 15, get_clock +Sent 67 144.532003 144.532003 6: seq: 16, get_clock +Sent 68 145.526292 145.526292 6: seq: 17, get_clock +Sent 69 146.510405 146.510405 6: seq: 18, get_clock +Sent 70 147.494805 147.494805 6: seq: 19, get_clock +Sent 71 148.478971 148.478971 6: seq: 1a, get_clock +Sent 72 149.463481 149.463481 6: seq: 1b, get_clock +Sent 73 150.447566 150.447566 6: seq: 1c, get_clock +Sent 74 151.432199 151.432199 6: seq: 1d, get_clock +Sent 75 152.416871 152.416871 6: seq: 1e, get_clock +Sent 76 153.401369 153.401369 6: seq: 1f, get_clock +Sent 77 154.386109 154.386109 6: seq: 10, get_clock +Sent 78 155.370256 155.370256 6: seq: 11, get_clock +Sent 79 156.354763 156.354763 6: seq: 12, get_clock +Sent 80 157.339564 157.339564 6: seq: 13, get_clock +Sent 81 158.323900 158.323900 6: seq: 14, get_clock +Sent 82 159.308221 159.308221 6: seq: 15, get_clock +Sent 83 160.292640 160.292640 6: seq: 16, get_clock +Sent 84 161.276729 161.276729 6: seq: 17, get_clock +Sent 85 162.260921 162.260921 6: seq: 18, get_clock +Sent 86 163.245101 163.245101 6: seq: 19, get_clock +Sent 87 164.229501 164.229501 6: seq: 1a, get_clock +Sent 88 165.214150 165.214150 6: seq: 1b, get_clock +Sent 89 166.198299 166.198299 6: seq: 1c, get_clock +Sent 90 167.183275 167.183275 6: seq: 1d, get_clock +Sent 91 168.167841 168.167841 6: seq: 1e, get_clock +Sent 92 169.152218 169.152218 6: seq: 1f, get_clock +Sent 93 170.136741 170.136741 6: seq: 10, get_clock +Sent 94 171.120792 171.120792 6: seq: 11, get_clock +Sent 95 172.104840 172.104840 6: seq: 12, get_clock +Sent 96 173.088893 173.088893 6: seq: 13, get_clock +Sent 97 174.072830 174.072830 6: seq: 14, get_clock +Sent 98 175.057933 175.057933 6: seq: 15, get_clock +Sent 99 175.116807 175.116807 6: seq: 16, emergency_stop +Dumping receive queue 100 messages +Receive 0 163.759772 163.245101 15: seq: 1a, analog_in_state oid=34 next_clock=3368160000 value=27959 +Receive 1 163.980960 163.245101 14: seq: 1a, counter_state oid=0 next_clock=3361680000 count=0 count_clock=0 +Receive 2 163.981003 163.245101 14: seq: 1a, stats count=130 sum=15402 sumsq=16685 +Receive 3 164.010943 163.245101 14: seq: 1a, counter_state oid=3 next_clock=3362400000 count=0 count_clock=0 +Receive 4 164.057461 163.245101 14: seq: 1a, counter_state oid=1 next_clock=3363504000 count=0 count_clock=0 +Receive 5 164.189780 163.245101 15: seq: 1a, analog_in_state oid=27 next_clock=3378480000 value=27829 +Receive 6 164.229782 164.229501 11: seq: 1b, clock clock=3367614311 +Receive 7 164.259764 164.229501 15: seq: 1b, analog_in_state oid=34 next_clock=3380160000 value=27957 +Receive 8 164.689785 164.229501 15: seq: 1b, analog_in_state oid=27 next_clock=3390480000 value=27830 +Receive 9 164.759764 164.229501 15: seq: 1b, analog_in_state oid=34 next_clock=3392160000 value=27961 +Receive 10 164.981443 164.229501 14: seq: 1b, counter_state oid=0 next_clock=3385692000 count=0 count_clock=0 +Receive 11 165.011451 164.229501 14: seq: 1b, counter_state oid=3 next_clock=3386412000 count=0 count_clock=0 +Receive 12 165.058465 164.229501 14: seq: 1b, counter_state oid=1 next_clock=3387528000 count=0 count_clock=0 +Receive 13 165.189797 164.229501 15: seq: 1b, analog_in_state oid=27 next_clock=3402480000 value=27831 +Receive 14 165.214346 165.214150 11: seq: 1c, clock clock=3391246044 +Receive 15 165.259769 165.214150 15: seq: 1c, analog_in_state oid=34 next_clock=3404160000 value=27950 +Receive 16 165.689788 165.214150 15: seq: 1c, analog_in_state oid=27 next_clock=3414480000 value=27835 +Receive 17 165.759799 165.214150 15: seq: 1c, analog_in_state oid=34 next_clock=3416160000 value=27949 +Receive 18 165.981956 165.214150 14: seq: 1c, counter_state oid=0 next_clock=3409704000 count=0 count_clock=0 +Receive 19 166.011962 165.214150 14: seq: 1c, counter_state oid=3 next_clock=3410424000 count=0 count_clock=0 +Receive 20 166.059451 165.214150 14: seq: 1c, counter_state oid=1 next_clock=3411552000 count=0 count_clock=0 +Receive 21 166.189788 165.214150 15: seq: 1c, analog_in_state oid=27 next_clock=3426480000 value=27825 +Receive 22 166.198525 166.198299 11: seq: 1d, clock clock=3414865338 +Receive 23 166.259768 166.198299 15: seq: 1d, analog_in_state oid=34 next_clock=3428160000 value=27956 +Receive 24 166.689793 166.198299 15: seq: 1d, analog_in_state oid=27 next_clock=3438480000 value=27822 +Receive 25 166.759788 166.198299 15: seq: 1d, analog_in_state oid=34 next_clock=3440160000 value=27952 +Receive 26 166.982457 166.198299 14: seq: 1d, counter_state oid=0 next_clock=3433716000 count=0 count_clock=0 +Receive 27 167.012456 166.198299 14: seq: 1d, counter_state oid=3 next_clock=3434436000 count=0 count_clock=0 +Receive 28 167.060443 166.198299 14: seq: 1d, counter_state oid=1 next_clock=3435576000 count=0 count_clock=0 +Receive 29 167.183497 167.183275 11: seq: 1e, clock clock=3438504945 +Receive 30 167.189782 167.183275 15: seq: 1e, analog_in_state oid=27 next_clock=3450480000 value=27829 +Receive 31 167.259763 167.183275 15: seq: 1e, analog_in_state oid=34 next_clock=3452160000 value=27952 +Receive 32 167.689791 167.183275 15: seq: 1e, analog_in_state oid=27 next_clock=3462480000 value=27826 +Receive 33 167.759767 167.183275 15: seq: 1e, analog_in_state oid=34 next_clock=3464160000 value=27953 +Receive 34 167.982963 167.183275 14: seq: 1e, counter_state oid=0 next_clock=3457728000 count=0 count_clock=0 +Receive 35 168.012933 167.183275 14: seq: 1e, counter_state oid=3 next_clock=3458448000 count=0 count_clock=0 +Receive 36 168.061442 167.183275 14: seq: 1e, counter_state oid=1 next_clock=3459600000 count=0 count_clock=0 +Receive 37 168.168056 168.167841 11: seq: 1f, clock clock=3462134570 +Receive 38 168.189795 168.167841 15: seq: 1f, analog_in_state oid=27 next_clock=3474480000 value=27833 +Receive 39 168.259770 168.167841 15: seq: 1f, analog_in_state oid=34 next_clock=3476160000 value=27962 +Receive 40 168.689794 168.167841 15: seq: 1f, analog_in_state oid=27 next_clock=3486480000 value=27828 +Receive 41 168.759797 168.167841 15: seq: 1f, analog_in_state oid=34 next_clock=3488160000 value=27955 +Receive 42 168.983463 168.167841 14: seq: 1f, counter_state oid=0 next_clock=3481740000 count=0 count_clock=0 +Receive 43 168.983545 168.167841 14: seq: 1f, stats count=130 sum=15632 sumsq=17434 +Receive 44 169.013437 168.167841 14: seq: 1f, counter_state oid=3 next_clock=3482460000 count=0 count_clock=0 +Receive 45 169.062445 168.167841 14: seq: 1f, counter_state oid=1 next_clock=3483624000 count=0 count_clock=0 +Receive 46 169.152408 169.152218 11: seq: 10, clock clock=3485759519 +Receive 47 169.189792 169.152218 15: seq: 10, analog_in_state oid=27 next_clock=3498480000 value=27824 +Receive 48 169.259769 169.152218 15: seq: 10, analog_in_state oid=34 next_clock=3500160000 value=27956 +Receive 49 169.689812 169.152218 15: seq: 10, analog_in_state oid=27 next_clock=3510480000 value=27825 +Receive 50 169.759773 169.152218 15: seq: 10, analog_in_state oid=34 next_clock=3512160000 value=27958 +Receive 51 169.983957 169.152218 14: seq: 10, counter_state oid=0 next_clock=3505752000 count=0 count_clock=0 +Receive 52 170.014034 169.152218 14: seq: 10, counter_state oid=3 next_clock=3506472000 count=0 count_clock=0 +Receive 53 170.063450 169.152218 14: seq: 10, counter_state oid=1 next_clock=3507648000 count=0 count_clock=0 +Receive 54 170.136950 170.136741 11: seq: 11, clock clock=3509388271 +Receive 55 170.189824 170.136741 15: seq: 11, analog_in_state oid=27 next_clock=3522480000 value=27832 +Receive 56 170.260329 170.136741 15: seq: 11, analog_in_state oid=34 next_clock=3524160000 value=27945 +Receive 57 170.689819 170.136741 15: seq: 11, analog_in_state oid=27 next_clock=3534480000 value=27832 +Receive 58 170.759774 170.136741 15: seq: 11, analog_in_state oid=34 next_clock=3536160000 value=27951 +Receive 59 170.984464 170.136741 14: seq: 11, counter_state oid=0 next_clock=3529764000 count=0 count_clock=0 +Receive 60 171.014444 170.136741 14: seq: 11, counter_state oid=3 next_clock=3530484000 count=0 count_clock=0 +Receive 61 171.064440 170.136741 14: seq: 11, counter_state oid=1 next_clock=3531672000 count=0 count_clock=0 +Receive 62 171.120990 171.120792 11: seq: 12, clock clock=3533005412 +Receive 63 171.189802 171.120792 15: seq: 12, analog_in_state oid=27 next_clock=3546480000 value=27837 +Receive 64 171.259772 171.120792 15: seq: 12, analog_in_state oid=34 next_clock=3548160000 value=27952 +Receive 65 171.689794 171.120792 15: seq: 12, analog_in_state oid=27 next_clock=3558480000 value=27822 +Receive 66 171.759772 171.120792 15: seq: 12, analog_in_state oid=34 next_clock=3560160000 value=27953 +Receive 67 171.984953 171.120792 14: seq: 12, counter_state oid=0 next_clock=3553776000 count=0 count_clock=0 +Receive 68 172.014957 171.120792 14: seq: 12, counter_state oid=3 next_clock=3554496000 count=0 count_clock=0 +Receive 69 172.065450 171.120792 14: seq: 12, counter_state oid=1 next_clock=3555696000 count=0 count_clock=0 +Receive 70 172.105059 172.104840 11: seq: 13, clock clock=3556622540 +Receive 71 172.189791 172.104840 15: seq: 13, analog_in_state oid=27 next_clock=3570480000 value=27826 +Receive 72 172.259761 172.104840 15: seq: 13, analog_in_state oid=34 next_clock=3572160000 value=27961 +Receive 73 172.689778 172.104840 15: seq: 13, analog_in_state oid=27 next_clock=3582480000 value=27824 +Receive 74 172.759766 172.104840 15: seq: 13, analog_in_state oid=34 next_clock=3584160000 value=27954 +Receive 75 172.985451 172.104840 14: seq: 13, counter_state oid=0 next_clock=3577788000 count=0 count_clock=0 +Receive 76 173.015455 172.104840 14: seq: 13, counter_state oid=3 next_clock=3578508000 count=0 count_clock=0 +Receive 77 173.066451 172.104840 14: seq: 13, counter_state oid=1 next_clock=3579720000 count=0 count_clock=0 +Receive 78 173.089079 173.088893 11: seq: 14, clock clock=3580239717 +Receive 79 173.189792 173.088893 15: seq: 14, analog_in_state oid=27 next_clock=3594480000 value=27836 +Receive 80 173.259767 173.088893 15: seq: 14, analog_in_state oid=34 next_clock=3596160000 value=27954 +Receive 81 173.689786 173.088893 15: seq: 14, analog_in_state oid=27 next_clock=3606480000 value=27832 +Receive 82 173.759769 173.088893 15: seq: 14, analog_in_state oid=34 next_clock=3608160000 value=27958 +Receive 83 173.985947 173.088893 14: seq: 14, counter_state oid=0 next_clock=3601800000 count=0 count_clock=0 +Receive 84 173.986019 173.088893 14: seq: 14, stats count=130 sum=15603 sumsq=17494 +Receive 85 174.015952 173.088893 14: seq: 14, counter_state oid=3 next_clock=3602520000 count=0 count_clock=0 +Receive 86 174.067452 173.088893 14: seq: 14, counter_state oid=1 next_clock=3603744000 count=0 count_clock=0 +Receive 87 174.073006 174.072830 11: seq: 15, clock clock=3603854089 +Receive 88 174.189792 174.072830 15: seq: 15, analog_in_state oid=27 next_clock=3618480000 value=27837 +Receive 89 174.259769 174.072830 15: seq: 15, analog_in_state oid=34 next_clock=3620160000 value=27959 +Receive 90 174.689786 174.072830 15: seq: 15, analog_in_state oid=27 next_clock=3630480000 value=27829 +Receive 91 174.759767 174.072830 15: seq: 15, analog_in_state oid=34 next_clock=3632160000 value=27958 +Receive 92 174.986450 174.072830 14: seq: 15, counter_state oid=0 next_clock=3625812000 count=0 count_clock=0 +Receive 93 175.016449 174.072830 14: seq: 15, counter_state oid=3 next_clock=3626532000 count=0 count_clock=0 +Receive 94 175.058920 175.057933 11: seq: 16, clock clock=3627496760 +Receive 95 175.068540 175.057933 14: seq: 16, counter_state oid=1 next_clock=3627768000 count=0 count_clock=0 +Receive 96 175.119117 175.116807 45: seq: 17, #output "command_emergency_stop: shutdown Command request" +Receive 97 175.119161 175.116807 11: seq: 17, #output "analog_in_shutdown oid 27 ev1 0 ev2 0 st 9 sc 8" +Receive 98 175.119164 175.116807 11: seq: 17, #output "analog_in_shutdown oid 34 ev1 0 ev2 0 st 9 sc 8" +Receive 99 175.119166 175.116807 12: seq: 17, shutdown clock=3628912057 static_string_id=17 +[2026-05-04 01:04:33.194] [info] [por.cpp:240] [1995] por handle_mcu_shutdown +[2026-05-04 01:04:33.200] [info] [config_manager.cpp:486] [1944] save persistent supplement info success +[2026-05-04 01:04:33.200] [info] [virtual_sdcard.cpp:338] [1944] start saving print process data. +[2026-05-04 01:04:33.203] [info] [virtual_sdcard.cpp:376] [1944] handle_power_outage No data needs to be saved before the actual printing. +[2026-05-04 01:04:33.204] [info] [virtual_sdcard.cpp:330] [1944] handle_shutdown : 330___ ok +[2026-05-04 01:04:33.204] [info] [heaters.cpp:579] [1944] handle_shutdown : 579___ ok +[2026-05-04 01:04:33.204] [info] [heaters.cpp:579] [1944] handle_shutdown : 579___ ok +[2026-05-04 01:04:33.205] [info] [error_mcu.cpp:163] [1944] _handle_notify_mcu_shutdown : 163___ ok +[2026-05-04 01:04:33.216] [info] [printer.cpp:231] [1944] msg:MCU shutdown in_shutdown_state:true +[2026-05-04 01:04:33.270] [info] [device_status.cpp:1100] [1956] Save exception code: [802] to local database +[2026-05-04 01:04:33.270] [warning] [device_status.cpp:1033] [1956] DeviceStatus::update_except_status: 802 +[2026-05-04 01:04:33.271] [warning] [device_status.cpp:1048] [1956] Exception Status Changed: {"machine_status":{"exception_status":[802]}} +[2026-05-04 01:04:33.972] [warning] [clocksync.cpp:181] [1944] queries_pending 6 +[2026-05-04 01:04:34.034] [warning] [clocksync.cpp:181] [1944] queries_pending 5 +[2026-05-04 01:04:34.159] [warning] [mcu.cpp:1363] [1944] Timeout with MCU toolhead eventtime: 176.110469375 +[2026-05-04 01:04:34.159] [info] [printer.cpp:231] [1944] msg:Lost communication with MCU 'toolhead' in_shutdown_state:true +[2026-05-04 01:04:34.957] [warning] [clocksync.cpp:181] [1944] queries_pending 7 +[2026-05-04 01:04:35.018] [warning] [clocksync.cpp:181] [1944] queries_pending 6 +[2026-05-04 01:04:35.942] [warning] [clocksync.cpp:181] [1944] queries_pending 8 +[2026-05-04 01:04:36.002] [warning] [clocksync.cpp:181] [1944] queries_pending 7 +[2026-05-04 01:04:36.926] [warning] [clocksync.cpp:181] [1944] queries_pending 9 +[2026-05-04 01:04:36.987] [warning] [clocksync.cpp:181] [1944] queries_pending 8 +[2026-05-04 01:04:37.910] [warning] [clocksync.cpp:181] [1944] queries_pending 10 +[2026-05-04 01:04:37.971] [warning] [clocksync.cpp:181] [1944] queries_pending 9 +[2026-05-04 01:04:38.895] [warning] [clocksync.cpp:181] [1944] queries_pending 11 +[2026-05-04 01:04:38.955] [warning] [clocksync.cpp:181] [1944] queries_pending 10 +[2026-05-04 01:04:39.879] [warning] [clocksync.cpp:181] [1944] queries_pending 12 +[2026-05-04 01:04:39.940] [warning] [clocksync.cpp:181] [1944] queries_pending 11 +[2026-05-04 01:04:40.864] [warning] [clocksync.cpp:181] [1944] queries_pending 13 +[2026-05-04 01:04:40.925] [warning] [clocksync.cpp:181] [1944] queries_pending 12 +[2026-05-04 01:04:41.848] [warning] [clocksync.cpp:181] [1944] queries_pending 14 +[2026-05-04 01:04:41.909] [warning] [clocksync.cpp:181] [1944] queries_pending 13 +[2026-05-04 01:04:42.832] [warning] [clocksync.cpp:181] [1944] queries_pending 15 +[2026-05-04 01:04:42.893] [warning] [clocksync.cpp:181] [1944] queries_pending 14 +[2026-05-04 01:04:43.816] [warning] [clocksync.cpp:181] [1944] queries_pending 16 +[2026-05-04 01:04:43.878] [warning] [clocksync.cpp:181] [1944] queries_pending 15 +[2026-05-04 01:04:44.801] [warning] [clocksync.cpp:181] [1944] queries_pending 17 +[2026-05-04 01:04:44.863] [warning] [clocksync.cpp:181] [1944] queries_pending 16 +[2026-05-04 01:04:45.786] [warning] [clocksync.cpp:181] [1944] queries_pending 18 +[2026-05-04 01:04:45.847] [warning] [clocksync.cpp:181] [1944] queries_pending 17 +[2026-05-04 01:04:46.771] [warning] [clocksync.cpp:181] [1944] queries_pending 19 +[2026-05-04 01:04:46.832] [warning] [clocksync.cpp:181] [1944] queries_pending 18 +[2026-05-04 01:04:47.756] [warning] [clocksync.cpp:181] [1944] queries_pending 20 +[2026-05-04 01:04:47.817] [warning] [clocksync.cpp:181] [1944] queries_pending 19 +[2026-05-04 01:04:48.740] [warning] [clocksync.cpp:181] [1944] queries_pending 21 +[2026-05-04 01:04:48.802] [warning] [clocksync.cpp:181] [1944] queries_pending 20 +[2026-05-04 01:04:49.725] [warning] [clocksync.cpp:181] [1944] queries_pending 22 +[2026-05-04 01:04:49.786] [warning] [clocksync.cpp:181] [1944] queries_pending 21 +[2026-05-04 01:04:50.709] [warning] [clocksync.cpp:181] [1944] queries_pending 23 +[2026-05-04 01:04:50.770] [warning] [clocksync.cpp:181] [1944] queries_pending 22 +[2026-05-04 01:04:51.693] [warning] [clocksync.cpp:181] [1944] queries_pending 24 +[2026-05-04 01:04:51.755] [warning] [clocksync.cpp:181] [1944] queries_pending 23 +[2026-05-04 01:04:52.677] [warning] [clocksync.cpp:181] [1944] queries_pending 25 +[2026-05-04 01:04:52.739] [warning] [clocksync.cpp:181] [1944] queries_pending 24 +[2026-05-04 01:04:53.662] [warning] [clocksync.cpp:181] [1944] queries_pending 26 +[2026-05-04 01:04:53.724] [warning] [clocksync.cpp:181] [1944] queries_pending 25 +[2026-05-04 01:04:54.647] [warning] [clocksync.cpp:181] [1944] queries_pending 27 +[2026-05-04 01:04:54.708] [warning] [clocksync.cpp:181] [1944] queries_pending 26 +[2026-05-04 01:04:55.631] [warning] [clocksync.cpp:181] [1944] queries_pending 28 +[2026-05-04 01:04:55.693] [warning] [clocksync.cpp:181] [1944] queries_pending 27 +[2026-05-04 01:04:56.621] [warning] [clocksync.cpp:181] [1944] queries_pending 29 +[2026-05-04 01:04:56.677] [warning] [clocksync.cpp:181] [1944] queries_pending 28 +[2026-05-04 01:04:57.606] [warning] [clocksync.cpp:181] [1944] queries_pending 30 +[2026-05-04 01:04:57.662] [warning] [clocksync.cpp:181] [1944] queries_pending 29 +[2026-05-04 01:04:58.590] [warning] [clocksync.cpp:181] [1944] queries_pending 31 +[2026-05-04 01:04:58.646] [warning] [clocksync.cpp:181] [1944] queries_pending 30 +[2026-05-04 01:04:59.575] [warning] [clocksync.cpp:181] [1944] queries_pending 32 +[2026-05-04 01:04:59.631] [warning] [clocksync.cpp:181] [1944] queries_pending 31 +[2026-05-04 01:05:00.560] [warning] [clocksync.cpp:181] [1944] queries_pending 33 +[2026-05-04 01:05:00.625] [warning] [clocksync.cpp:181] [1944] queries_pending 32 +[2026-05-04 01:05:01.544] [warning] [clocksync.cpp:181] [1944] queries_pending 34 +[2026-05-04 01:05:01.609] [warning] [clocksync.cpp:181] [1944] queries_pending 33 +[2026-05-04 01:05:02.529] [warning] [clocksync.cpp:181] [1944] queries_pending 35 +[2026-05-04 01:05:02.593] [warning] [clocksync.cpp:181] [1944] queries_pending 34 +[2026-05-04 01:05:03.513] [warning] [clocksync.cpp:181] [1944] queries_pending 36 +[2026-05-04 01:05:03.577] [warning] [clocksync.cpp:181] [1944] queries_pending 35 +[2026-05-04 01:05:04.497] [warning] [clocksync.cpp:181] [1944] queries_pending 37 +[2026-05-04 01:05:04.562] [warning] [clocksync.cpp:181] [1944] queries_pending 36 +[2026-05-04 01:05:05.482] [warning] [clocksync.cpp:181] [1944] queries_pending 38 +[2026-05-04 01:05:05.547] [warning] [clocksync.cpp:181] [1944] queries_pending 37 +[2026-05-04 01:05:06.467] [warning] [clocksync.cpp:181] [1944] queries_pending 39 +[2026-05-04 01:05:06.532] [warning] [clocksync.cpp:181] [1944] queries_pending 38 +[2026-05-04 01:05:07.451] [warning] [clocksync.cpp:181] [1944] queries_pending 40 +[2026-05-04 01:05:07.517] [warning] [clocksync.cpp:181] [1944] queries_pending 39 +[2026-05-04 01:05:08.435] [warning] [clocksync.cpp:181] [1944] queries_pending 41 +[2026-05-04 01:11:45.495] [info] [logger.cpp:80] [1936] elegoo log init finish! +[2026-05-04 01:11:45.547] [info] [main.cpp:209] [1936] inputtty:./config/printer,gcode_fd:5 +[2026-05-04 01:11:45.624] [info] [main.cpp:226] [1936] Starting Elegoo... +[2026-05-04 01:11:45.624] [info] [main.cpp:228] [1936] start_args.size:17,sizeof(long_options):9 +[2026-05-04 01:11:45.624] [info] [main.cpp:231] [1936] start_args[img_version]:00.00.00.00 +[2026-05-04 01:11:45.624] [info] [main.cpp:231] [1936] start_args[gui_version]:01.01.11.03 +[2026-05-04 01:11:45.624] [info] [main.cpp:231] [1936] start_args[elegoo_version]:03.26.17.07 +[2026-05-04 01:11:45.624] [info] [main.cpp:231] [1936] start_args[camera_version]:00.00.00.00 +[2026-05-04 01:11:45.624] [info] [main.cpp:231] [1936] start_args[canvas_version]:00.00.00.00 +[2026-05-04 01:11:45.624] [info] [main.cpp:231] [1936] start_args[ota_version]:01.03.02.36 +[2026-05-04 01:11:45.624] [info] [main.cpp:231] [1936] start_args[bed_sensor_version]:00.00.00.00 +[2026-05-04 01:11:45.624] [info] [main.cpp:231] [1936] start_args[start_reason]:startup +[2026-05-04 01:11:45.624] [info] [main.cpp:231] [1936] start_args[apiserver]:/tmp/elegoo_uds +[2026-05-04 01:11:45.625] [info] [main.cpp:231] [1936] start_args[toolhead_gd32_version]:00.00.00.00 +[2026-05-04 01:11:45.625] [info] [main.cpp:231] [1936] start_args[autosave_file]:/opt/usr/cfg/autosave.cfg +[2026-05-04 01:11:45.625] [info] [main.cpp:231] [1936] start_args[gcode_fd]:5 +[2026-05-04 01:11:45.625] [info] [main.cpp:231] [1936] start_args[config_file]:/opt/inst/printer_dsp.cfg +[2026-05-04 01:11:45.625] [info] [main.cpp:231] [1936] start_args[cpu_info]:2 core ARMv7 Processor rev 5 (v7l) +[2026-05-04 01:11:45.625] [info] [main.cpp:231] [1936] start_args[mcu_gd32_version]:00.00.00.00 +[2026-05-04 01:11:45.625] [info] [main.cpp:231] [1936] start_args[machine_model]:Centauri Carbon 2 +[2026-05-04 01:11:45.625] [info] [main.cpp:231] [1936] start_args[os_version]:01.02.12.01 +[2026-05-04 01:11:45.625] [info] [main.cpp:236] [1936] long_options[debuginput]:i +[2026-05-04 01:11:45.625] [info] [main.cpp:236] [1936] long_options[input-tty]:I +[2026-05-04 01:11:45.625] [info] [main.cpp:236] [1936] long_options[api-server]:a +[2026-05-04 01:11:45.625] [info] [main.cpp:236] [1936] long_options[logfile]:l +[2026-05-04 01:11:45.625] [info] [main.cpp:236] [1936] long_options[verbose]:v +[2026-05-04 01:11:45.625] [info] [main.cpp:236] [1936] long_options[debugoutput]:o +[2026-05-04 01:11:45.625] [info] [main.cpp:236] [1936] long_options[dictionary]:d +[2026-05-04 01:11:45.625] [info] [main.cpp:236] [1936] long_options[import-test]:t +[2026-05-04 01:11:45.626] [info] [printer.cpp:50] [1936] create Printer success! +[2026-05-04 01:11:45.626] [info] [printer.cpp:366] [1936] connect begin! +[2026-05-04 01:11:45.626] [info] [printer.cpp:284] [1936] read_config begin! +[2026-05-04 01:11:45.631] [info] [gcode.cpp:1927] [1943] create DeviceStatusWorker success!! +[2026-05-04 01:11:45.672] [info] [webhooks.cpp:607] [1936] create WebHooks success! +[2026-05-04 01:11:45.672] [info] [webhooks.cpp:384] [1936] create ServerSocket success! /tmp/elegoo_uds +[2026-05-04 01:11:45.672] [info] [webhooks.cpp:443] [1936] create ServerSocket success! +[2026-05-04 01:11:45.674] [info] [webhooks.cpp:1317] [1945] create DeviceExceptWorker success!! +[2026-05-04 01:11:46.101] [info] [config_manager.cpp:171] [1936] begin read sn info +[2026-05-04 01:11:46.102] [info] [config_manager.cpp:205] [1936] read product auth success, sn: F01CFFQQFN55YKS +[2026-05-04 01:11:46.134] [info] [config_manager.cpp:148] [1936] machine: {"machine":{"model":"Centauri Carbon 2"},"versions":[{"os_version":"01.02.12.01"},{"mcu_gd32_version":"00.00.00.00"},{"toolhead_gd32_version":"00.00.00.00"},{"bed_sensor_version":"00.00.00.00"},{"canvas_version":"00.00.00.00"},{"camera_version":"00.00.00.00"},{"elegoo_version":"03.26.17.07"},{"gui_version":"01.01.11.03"},{"ota_version":"01.03.02.36"},{"img_version":"00.00.00.00"}]} +[2026-05-04 01:11:46.157] [info] [config_manager.cpp:209] [1936] begin read supplement info +[2026-05-04 01:11:46.186] [info] [config_manager.cpp:306] [1936] token info: token: miM2yt, token_switch_enabled: true, is_lan_mode: true, power_outage_resume_enabled: true, region: 1 +[2026-05-04 01:11:46.189] [info] [config_manager.cpp:453] [1936] load persistent supplement info success +[2026-05-04 01:11:46.190] [info] [device_status.cpp:133] [1936] Create component manager for Centauri Carbon 2 +[2026-05-04 01:11:46.416] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_details WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_details GROUP BY filename HAVING MAX(create_time)); +[2026-05-04 01:11:46.418] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_thumbnail WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_thumbnail GROUP BY filename); +[2026-05-04 01:11:46.420] [info] [record_manager.cpp:302] [1936] Loaded 3 tasks from the database. +[2026-05-04 01:11:46.420] [info] [record_manager.cpp:307] [1936] end task info id a065d20a-a124-4f32-afca-a3dfb699ae8c name ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode status 2. +[2026-05-04 01:11:46.422] [info] [record_manager.cpp:318] [1936] Loaded 11 files from the database. +[2026-05-04 01:11:46.422] [info] [record_manager.cpp:323] [1936] Loaded 3 thumbnails from the database. +[2026-05-04 01:11:46.423] [info] [record_manager.cpp:328] [1936] Loaded 0 delete file records from the database. +[2026-05-04 01:11:46.423] [info] [sql_database.cpp:417] [1936] Loaded exception message: id 5, code 802 +[2026-05-04 01:11:46.423] [info] [sql_database.cpp:417] [1936] Loaded exception message: id 4, code 1263 +[2026-05-04 01:11:46.424] [info] [sql_database.cpp:417] [1936] Loaded exception message: id 3, code 1263 +[2026-05-04 01:11:46.424] [info] [sql_database.cpp:417] [1936] Loaded exception message: id 2, code 801 +[2026-05-04 01:11:46.424] [info] [sql_database.cpp:417] [1936] Loaded exception message: id 1, code 801 +[2026-05-04 01:11:46.424] [info] [record_manager.cpp:333] [1936] Loaded 5 exception messages from the database. +[2026-05-04 01:11:46.425] [info] [record_manager.cpp:827] [1936] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-04 01:11:46.425] [info] [record_manager.cpp:827] [1936] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-04 01:11:46.425] [info] [record_manager.cpp:827] [1936] File exists: /opt/usr/gcode/local/IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-04 01:11:46.426] [info] [record_manager.cpp:831] [1936] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-04 01:11:46.426] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:11:46.441] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:11:46.441] [info] [record_manager.cpp:344] [1936] check_db_files file[ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode] not exist system, clear it from database +[2026-05-04 01:11:46.442] [info] [record_manager.cpp:831] [1936] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-04 01:11:46.442] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:11:46.454] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:11:46.454] [info] [record_manager.cpp:344] [1936] check_db_files file[ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode] not exist system, clear it from database +[2026-05-04 01:11:46.455] [info] [record_manager.cpp:831] [1936] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-04 01:11:46.455] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:11:46.468] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:11:46.469] [info] [record_manager.cpp:344] [1936] check_db_files file[ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode] not exist system, clear it from database +[2026-05-04 01:11:46.470] [info] [record_manager.cpp:831] [1936] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-04 01:11:46.470] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:11:46.482] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:11:46.482] [info] [record_manager.cpp:344] [1936] check_db_files file[ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode] not exist system, clear it from database +[2026-05-04 01:11:46.483] [info] [record_manager.cpp:831] [1936] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-04 01:11:46.483] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:11:46.496] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:11:46.497] [info] [record_manager.cpp:344] [1936] check_db_files file[ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode] not exist system, clear it from database +[2026-05-04 01:11:46.498] [info] [record_manager.cpp:831] [1936] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-04 01:11:46.498] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:11:46.510] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:11:46.510] [info] [record_manager.cpp:344] [1936] check_db_files file[ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode] not exist system, clear it from database +[2026-05-04 01:11:46.511] [info] [record_manager.cpp:831] [1936] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-04 01:11:46.511] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:11:46.523] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:11:46.523] [info] [record_manager.cpp:344] [1936] check_db_files file[ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode] not exist system, clear it from database +[2026-05-04 01:11:46.525] [info] [record_manager.cpp:831] [1936] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-04 01:11:46.525] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:11:46.537] [info] [sql_database.cpp:164] [1936] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:11:46.538] [info] [record_manager.cpp:344] [1936] check_db_files file[ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode] not exist system, clear it from database +[2026-05-04 01:11:46.539] [info] [record_manager.cpp:361] [1936] Local file count 11 does not match cached file details 3, need to parse online files. +[2026-05-04 01:11:46.539] [info] [record_manager.cpp:607] [1936] Parsing local files in /opt/usr/gcode/local/ +[2026-05-04 01:11:46.539] [info] [record_manager.cpp:623] [1936] File ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode already exists in cache, skipping parsing. +[2026-05-04 01:11:46.539] [info] [record_manager.cpp:496] [1936] Parsing local file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-04 01:11:46.539] [error] [record_manager.cpp:32] [1936] stat failed /opt/usr/gcode/local//ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-04 01:11:46.539] [info] [record_manager.cpp:383] [1936] color map size: 0 +[2026-05-04 01:11:46.539] [info] [sql_database.cpp:97] [1936] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:11:46.552] [info] [record_manager.cpp:512] [1936] Parsed file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:11:46.553] [info] [record_manager.cpp:496] [1936] Parsing local file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-04 01:11:46.553] [error] [record_manager.cpp:32] [1936] stat failed /opt/usr/gcode/local//ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-04 01:11:46.553] [info] [record_manager.cpp:383] [1936] color map size: 0 +[2026-05-04 01:11:46.553] [info] [sql_database.cpp:97] [1936] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:11:46.567] [info] [record_manager.cpp:512] [1936] Parsed file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:11:46.567] [info] [record_manager.cpp:496] [1936] Parsing local file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-04 01:11:46.567] [error] [record_manager.cpp:32] [1936] stat failed /opt/usr/gcode/local//ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-04 01:11:46.567] [info] [record_manager.cpp:383] [1936] color map size: 0 +[2026-05-04 01:11:46.567] [info] [sql_database.cpp:97] [1936] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:11:46.579] [info] [record_manager.cpp:512] [1936] Parsed file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:11:46.579] [info] [record_manager.cpp:496] [1936] Parsing local file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-04 01:11:46.579] [error] [record_manager.cpp:32] [1936] stat failed /opt/usr/gcode/local//ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-04 01:11:46.579] [info] [record_manager.cpp:383] [1936] color map size: 0 +[2026-05-04 01:11:46.579] [info] [sql_database.cpp:97] [1936] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:11:46.591] [info] [record_manager.cpp:512] [1936] Parsed file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:11:46.591] [info] [record_manager.cpp:496] [1936] Parsing local file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-04 01:11:46.591] [error] [record_manager.cpp:32] [1936] stat failed /opt/usr/gcode/local//ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-04 01:11:46.591] [info] [record_manager.cpp:383] [1936] color map size: 0 +[2026-05-04 01:11:46.591] [info] [sql_database.cpp:97] [1936] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:11:46.602] [info] [record_manager.cpp:512] [1936] Parsed file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:11:46.603] [info] [record_manager.cpp:496] [1936] Parsing local file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-04 01:11:46.603] [error] [record_manager.cpp:32] [1936] stat failed /opt/usr/gcode/local//ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-04 01:11:46.603] [info] [record_manager.cpp:383] [1936] color map size: 0 +[2026-05-04 01:11:46.603] [info] [sql_database.cpp:97] [1936] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:11:46.616] [info] [record_manager.cpp:512] [1936] Parsed file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:11:46.617] [info] [record_manager.cpp:623] [1936] File ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode already exists in cache, skipping parsing. +[2026-05-04 01:11:46.617] [info] [record_manager.cpp:496] [1936] Parsing local file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-04 01:11:46.617] [error] [record_manager.cpp:32] [1936] stat failed /opt/usr/gcode/local//ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-04 01:11:46.617] [info] [record_manager.cpp:383] [1936] color map size: 0 +[2026-05-04 01:11:46.617] [info] [sql_database.cpp:97] [1936] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:11:46.629] [info] [record_manager.cpp:512] [1936] Parsed file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:11:46.629] [info] [record_manager.cpp:623] [1936] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode already exists in cache, skipping parsing. +[2026-05-04 01:11:46.629] [info] [record_manager.cpp:496] [1936] Parsing local file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-04 01:11:46.629] [error] [record_manager.cpp:32] [1936] stat failed /opt/usr/gcode/local//ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-04 01:11:46.629] [info] [record_manager.cpp:383] [1936] color map size: 0 +[2026-05-04 01:11:46.630] [info] [sql_database.cpp:97] [1936] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:11:46.641] [info] [record_manager.cpp:512] [1936] Parsed file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:11:46.641] [info] [record_manager.cpp:636] [1936] Finished parsing local files, total: 11 +[2026-05-04 01:11:46.641] [info] [record_manager.cpp:365] [1936] RecordManager initialized successfully. +[2026-05-04 01:11:46.642] [info] [pins.cpp:112] [1936] create PrinterPins success! +[2026-05-04 01:11:46.643] [info] [msgproto.cpp:606] [1936] create MessageParser success! +[2026-05-04 01:11:46.644] [info] [mcu.cpp:1963] [1936] restart_via_remoterpc +[2026-05-04 01:11:46.644] [error] [serialhdl.cpp:309] [1936] SerialReader::disconnect() +[2026-05-04 01:11:46.644] [info] [dsp_helper.h:31] [1936] remoterpc_ctrl 0 +[2026-05-04 01:11:46.645] [info] [webhooks.cpp:56] [1936] webhooks client 13828996: New connection +[2026-05-04 01:11:46.652] [info] [webhooks.cpp:1232] [1936] handle_query is_subscribe true : {"canvas_dev":["fds","canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[2026-05-04 01:11:46.654] [info] [webhooks.cpp:1232] [1936] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[2026-05-04 01:11:46.654] [info] [device_ui_message_handle.cpp:65] [1936] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[2026-05-04 01:11:46.655] [info] [device_ui_message_handle.cpp:503] [1936] Total tasks: 3 +[2026-05-04 01:11:46.656] [info] [webhooks.cpp:799] [1936] return handle_sync_info: {"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3} +[2026-05-04 01:11:46.657] [info] [webhooks.cpp:170] [1936] return total: {"id":5,"method":"sync_info","result":{"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3}} +[2026-05-04 01:11:46.717] [warning] [webhooks.cpp:148] [1936] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:11:46.718] [info] [webhooks.cpp:170] [1936] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":7} +[2026-05-04 01:11:46.719] [info] [webhooks.cpp:170] [1936] return total: {"id":9,"result":{}} +[2026-05-04 01:11:46.721] [warning] [webhooks.cpp:148] [1936] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:11:46.721] [info] [webhooks.cpp:170] [1936] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":11} +[2026-05-04 01:11:46.722] [info] [device_ui_message_handle.cpp:255] [1936] Handling bind function request {"script":"get_device_info"} +[2026-05-04 01:11:46.723] [info] [webhooks.cpp:768] [1936] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-05-04 01:11:46.723] [info] [webhooks.cpp:170] [1936] return total: {"id":13,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-05-04 01:11:46.724] [info] [device_ui_message_handle.cpp:65] [1936] Handling sync info request {"region_code":1,"script":"set_region"} +[2026-05-04 01:11:46.724] [info] [device_ui_message_handle.cpp:129] [1936] Handling set region request 1 +[2026-05-04 01:11:46.724] [info] [device_ui_message_handle.cpp:132] [1936] Region is the same as current region: 1 +[2026-05-04 01:11:46.725] [info] [webhooks.cpp:799] [1936] return handle_sync_info: {"script":"set_region"} +[2026-05-04 01:11:46.725] [info] [webhooks.cpp:170] [1936] return total: {"id":15,"method":"sync_info","result":{"script":"set_region"}} +[2026-05-04 01:11:46.731] [info] [webhooks.cpp:170] [1936] return total: {"id":3,"result":{"eventtime":22.582836468,"status":null}} +[2026-05-04 01:11:46.733] [warning] [webhooks.cpp:148] [1936] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:11:46.734] [info] [webhooks.cpp:170] [1936] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":6} +[2026-05-04 01:11:46.735] [info] [device_ui_message_handle.cpp:321] [1936] Get Network access cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-04 01:11:46.735] [info] [webhooks.cpp:756] [1936] return handle_get_network_access_cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-04 01:11:46.735] [info] [webhooks.cpp:170] [1936] return total: {"id":10,"method":"get_network_access_cfg","result":{"object":{"lan_status":true,"token":"miM2yt","token_status":true}}} +[2026-05-04 01:11:46.736] [info] [device_ui_message_handle.cpp:65] [1936] Handling sync info request {"script":"get_device_status"} +[2026-05-04 01:11:46.737] [info] [device_ui_message_handle.cpp:143] [1936] Handling get device status request +[2026-05-04 01:11:46.737] [info] [device_ui_message_handle.cpp:154] [1936] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-04 01:11:46.738] [info] [webhooks.cpp:799] [1936] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-04 01:11:46.738] [info] [webhooks.cpp:170] [1936] return total: {"id":14,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[2026-05-04 01:11:46.740] [info] [webhooks.cpp:170] [1936] return total: {"id":4,"result":{"eventtime":22.582836468,"status":null}} +[2026-05-04 01:11:47.157] [warning] [webhooks.cpp:148] [1936] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:11:47.158] [info] [webhooks.cpp:170] [1936] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":8} +[2026-05-04 01:11:47.158] [info] [device_ui_message_handle.cpp:65] [1936] Handling sync info request {"script":"set_status","status":1,"sub_status":0} +[2026-05-04 01:11:47.159] [info] [device_ui_message_handle.cpp:553] [1936] Setting status: 1, sub_status: 0 +[2026-05-04 01:11:47.159] [info] [device_status.cpp:1204] [1936] Set UI ready: true +[2026-05-04 01:11:47.159] [info] [webhooks.cpp:799] [1936] return handle_sync_info: {"script":"set_status"} +[2026-05-04 01:11:47.159] [info] [webhooks.cpp:170] [1936] return total: {"id":16,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-04 01:11:47.647] [info] [dsp_helper.h:31] [1936] remoterpc_ctrl 1 +[2026-05-04 01:11:47.764] [warning] [webhooks.cpp:148] [1936] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:11:47.764] [info] [webhooks.cpp:170] [1936] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":12} +[2026-05-04 01:11:48.766] [info] [msgproto.cpp:606] [1936] create MessageParser success! +[2026-05-04 01:11:48.768] [info] [mcu.cpp:1049] [1936] MCU 'bed_sensor' restart power +[2026-05-04 01:11:49.179] [info] [mcu.cpp:1072] [1936] bootloader mode, try jump to app! +[2026-05-04 01:11:49.210] [info] [msgproto.cpp:606] [1936] create MessageParser success! +[2026-05-04 01:11:49.213] [info] [mcu.cpp:1049] [1936] MCU 'toolhead' restart power +[2026-05-04 01:11:49.623] [info] [mcu.cpp:1072] [1936] bootloader mode, try jump to app! +[2026-05-04 01:11:49.784] [info] [bed_mesh.cpp:1466] [1936] zero_ref_pos size 0 +[2026-05-04 01:11:49.840] [info] [bed_mesh.cpp:2722] [1936] ProfileManager profile->get_name bed_mesh +[2026-05-04 01:11:49.840] [info] [bed_mesh.cpp:2722] [1936] ProfileManager profile->get_name bed_mesh ADAPTIVE +[2026-05-04 01:11:49.840] [info] [bed_mesh.cpp:2722] [1936] ProfileManager profile->get_name bed_mesh default +[2026-05-04 01:11:49.858] [info] [gcode_move.cpp:60] [1936] GCodeMove init! +[2026-05-04 01:11:49.900] [info] [gcode_move.cpp:119] [1936] GCodeMove init success!! +[2026-05-04 01:11:49.901] [info] [gcode_move.cpp:274] [1936] set_move_transform transform: force:false +[2026-05-04 01:11:49.991] [info] [print_stats.cpp:26] [1936] PrintStats init! +[2026-05-04 01:11:49.992] [info] [print_stats.cpp:55] [1936] PrintStats init success!! +[2026-05-04 01:11:49.993] [info] [bed_mesh.cpp:463] [1936] update_status bed_mesh_exist:0x0100 +[2026-05-04 01:11:49.993] [info] [print_stats.cpp:277] [1936] bed_mesh_exist:0x0100 +[2026-05-04 01:11:49.993] [warning] [extras_factory.cpp:323] [1936] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-04 01:11:49.994] [warning] [extras_factory.cpp:323] [1936] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-04 01:11:50.048] [info] [beep_ctrl.cpp:39] [1936] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[2026-05-04 01:11:50.050] [info] [beep_ctrl.cpp:147] [1936] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[2026-05-04 01:11:50.051] [info] [beep_ctrl.cpp:262] [1936] exec_cmd data 0 +[2026-05-04 01:11:50.053] [info] [beep_ctrl.cpp:181] [1936] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[2026-05-04 01:11:50.054] [info] [beep_ctrl.cpp:262] [1936] exec_cmd data 333333 +[2026-05-04 01:11:50.054] [info] [beep_ctrl.cpp:199] [1936] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[2026-05-04 01:11:50.055] [info] [beep_ctrl.cpp:262] [1936] exec_cmd data 166666 +[2026-05-04 01:11:50.056] [info] [beep_ctrl.cpp:217] [1936] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[2026-05-04 01:11:50.056] [info] [beep_ctrl.cpp:262] [1936] exec_cmd data normal +[2026-05-04 01:11:50.090] [info] [query_adc.cpp:36] [1936] QueryADC init success! +[2026-05-04 01:11:50.091] [info] [mmu.cpp:1447] [1936] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[2026-05-04 01:11:50.092] [info] [mmu.cpp:1465] [1936] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[2026-05-04 01:11:50.121] [info] [cavity_fan.cpp:27] [1936] PrinterFanCavity init! +[2026-05-04 01:11:50.122] [info] [cavity_fan.cpp:85] [1936] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[2026-05-04 01:11:50.122] [info] [cavity_fan.cpp:96] [1936] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[2026-05-04 01:11:50.122] [info] [cavity_fan.cpp:104] [1936] temp_drop_det_time 60 5 120 1.5 180 +[2026-05-04 01:11:50.173] [info] [fan.cpp:55] [1936] __func__:Fan #1 str_pin:PD17 +[2026-05-04 01:11:50.174] [info] [cavity_fan.cpp:115] [1936] PrinterFanCavity init success!! +[2026-05-04 01:11:50.175] [info] [stepper_enable.cpp:27] [1936] PrinterStepperEnable init! +[2026-05-04 01:11:50.177] [info] [fan.cpp:55] [1936] __func__:Fan #1 str_pin:PG15 +[2026-05-04 01:11:50.208] [info] [fan.cpp:55] [1936] __func__:Fan #1 str_pin:toolhead:PA8 +[2026-05-04 01:11:50.211] [info] [fan.cpp:55] [1936] __func__:Fan #1 str_pin:PD15 +[2026-05-04 01:11:50.217] [info] [exclude_object.cpp:28] [1936] ExcludeObject init! +[2026-05-04 01:11:50.219] [info] [exclude_object.cpp:79] [1936] ExcludeObject init success! +[2026-05-04 01:11:50.224] [warning] [extras_factory.cpp:323] [1936] create extras: "g180_load_config" failer! +[2026-05-04 01:11:50.227] [info] [heater_bed.cpp:18] [1936] PrinterHeaterBed Init! +[2026-05-04 01:11:50.254] [info] [heaters.cpp:873] [1936] PrinterHeaters init! +[2026-05-04 01:11:50.256] [info] [heaters.cpp:898] [1936] PrinterHeaters init success! +[2026-05-04 01:11:50.292] [info] [heaters.cpp:935] [1936] c->get_name(): thermistor NTC 100K beta 3950 +[2026-05-04 01:11:50.293] [info] [thermistor.cpp:138] [1936] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[2026-05-04 01:11:50.293] [info] [heaters.cpp:935] [1936] c->get_name(): thermistor NTC 100K beta 3950 DSP +[2026-05-04 01:11:50.294] [info] [thermistor.cpp:138] [1936] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[2026-05-04 01:11:50.378] [info] [utilities.cpp:52] [1936] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[2026-05-04 01:11:50.380] [info] [thermistor.cpp:146] [1936] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[2026-05-04 01:11:50.380] [info] [heaters.cpp:935] [1936] c->get_name(): thermistor NTC 100K beta 4300 +[2026-05-04 01:11:50.381] [info] [thermistor.cpp:138] [1936] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[2026-05-04 01:11:50.381] [info] [heaters.cpp:935] [1936] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[2026-05-04 01:11:50.382] [info] [thermistor.cpp:138] [1936] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[2026-05-04 01:11:50.382] [info] [heaters.cpp:935] [1936] c->get_name(): thermistor NTC R25 350 +[2026-05-04 01:11:50.383] [info] [thermistor.cpp:138] [1936] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[2026-05-04 01:11:50.383] [info] [heaters.cpp:943] [1936] PrinterHeaters::load_config success! +[2026-05-04 01:11:50.384] [info] [heaters.cpp:1032] [1936] setup_sensor success! +[2026-05-04 01:11:50.384] [info] [adc_temperature.cpp:29] [1936] __func__:PrinterADCtoTemperature name:heater_bed +[2026-05-04 01:11:50.385] [info] [adc_temperature.cpp:35] [1936] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[2026-05-04 01:11:50.385] [info] [adc_temperature.cpp:165] [1936] name:heater_bed +[2026-05-04 01:11:50.385] [info] [error_mcu.cpp:101] [1936] create PrinterMCUError success! +[2026-05-04 01:11:50.387] [info] [heaters.cpp:83] [1936] Heater init! name: heater_bed +[2026-05-04 01:11:50.387] [info] [heaters.cpp:122] [1936] __func__:Heater,heater_pin:PG13 +[2026-05-04 01:11:50.389] [info] [pid_calibrate.cpp:43] [1936] PIDCalibrate init success!! +[2026-05-04 01:11:50.390] [warning] [heaters.cpp:329] [1936] Heater init success!!!! +[2026-05-04 01:11:50.390] [warning] [heaters.cpp:985] [1936] debug name heater_bed, gcode_id B +[2026-05-04 01:11:50.391] [info] [heater_bed.cpp:41] [1936] PrinterHeaterBed Init success! +[2026-05-04 01:11:50.392] [info] [heater_fan.cpp:24] [1936] PrinterHeaterFan init! +[2026-05-04 01:11:50.393] [info] [fan.cpp:55] [1936] __func__:Fan #1 str_pin:toolhead:PB13 +[2026-05-04 01:11:50.394] [info] [heater_fan.cpp:46] [1936] PrinterHeaterFan init success!! +[2026-05-04 01:11:50.397] [info] [idle_timeout.cpp:28] [1936] init IdleTimeout ... +[2026-05-04 01:11:50.399] [info] [idle_timeout.cpp:72] [1936] init IdleTimeout success !!! +[2026-05-04 01:11:50.431] [info] [bulk_sensor.cpp:312] [1936] unpack_fmt:mqtt_strategy_->is_valid(): true +[2026-05-04 01:11:56.217] [info] [clocksync.cpp:219] [1988] mcu 'mcu': Ignoring clock sample: sent_time=32.10611639,time_avg=27.18457718116203,freq=24004264.94260158,diff=101901.78156924248(0.0042459075653851035),stddev=20344.386493504175 +[2026-05-04 01:11:56.670] [info] [mqtt_connector.cpp:498] [2006] Starting heartbeat monitor thread. +[2026-05-04 01:11:56.670] [info] [timer_manager.cpp:72] [2006] Adding timer task: LanMQTTStrategy_heartbeat_monitor, interval: 20000 ms, repeat: true +[2026-05-04 01:11:56.689] [info] [mqtt_connector.cpp:295] [2006] Subscribed to topic: elegoo/F01CFFQQFN55YKS/api_register +[2026-05-04 01:12:00.101] [info] [clocksync.cpp:206] [1990] mcu 'bed_sensor': New minimum RTT: sent_time=36.003068558,half_rtt=0.0001678749999989293,freq=120004413.59095973 +[2026-05-04 01:12:10.948] [info] [clocksync.cpp:206] [1990] mcu 'bed_sensor': New minimum RTT: sent_time=46.833573397,half_rtt=0.0001667914999998743,freq=119998629.19112305 +[2026-05-04 01:12:20.530] [info] [por.cpp:57] [1936] POR CHARGE DONE! +[2026-05-04 01:12:29.730] [info] [clocksync.cpp:206] [1996] mcu 'toolhead': New minimum RTT: sent_time=65.58706378100001,half_rtt=0.0002538954999948828,freq=119997925.99874043 +[2026-05-04 01:12:34.624] [info] [clocksync.cpp:206] [1990] mcu 'bed_sensor': New minimum RTT: sent_time=70.47188065799999,half_rtt=0.00016625000000658474,freq=119998620.90372874 +[2026-05-04 01:12:43.497] [info] [clocksync.cpp:206] [1990] mcu 'bed_sensor': New minimum RTT: sent_time=79.331605787,half_rtt=0.00016295849999892198,freq=119998685.0127065 +[2026-05-04 01:13:15.102] [info] [clocksync.cpp:206] [1996] mcu 'toolhead': New minimum RTT: sent_time=110.883641302,half_rtt=0.0002512085000034858,freq=119998411.97557482 +[2026-05-04 01:13:48.255] [info] [heaters.cpp:423] [1988] __func__:temperature_callback,heater_name:heater_bed,read_time:120.27800000037998,last_temp:22.299386034058898,temp:22.299386034058898,target_temp:0,smoothed_temp:22.308127627228814 +[2026-05-04 01:13:55.408] [info] [heaters.cpp:423] [1996] __func__:temperature_callback,heater_name:extruder,read_time:127.41936716754164,last_temp:25.244472084383688,temp:25.244472084383688,target_temp:0,smoothed_temp:25.32394963637448 +[2026-05-04 01:15:01.574] [info] [clocksync.cpp:206] [1990] mcu 'bed_sensor': New minimum RTT: sent_time=217.168292686,half_rtt=0.00016331249999268493,freq=119998808.82526366 +[2026-05-04 01:15:32.182] [info] [clocksync.cpp:219] [1996] mcu 'toolhead': Ignoring clock sample: sent_time=247.734058492,time_avg=218.20832460198702,freq=119998578.06877159,diff=70286.42722702026(0.0005857202268918356),stddev=4483.460329511215 +[2026-05-04 01:15:48.453] [info] [heaters.cpp:423] [1988] __func__:temperature_callback,heater_name:heater_bed,read_time:240.27800000038,last_temp:22.352108538300058,temp:22.352108538300058,target_temp:0,smoothed_temp:22.355863123799637 +[2026-05-04 01:15:55.612] [info] [heaters.cpp:423] [1996] __func__:temperature_callback,heater_name:extruder,read_time:247.42078218442705,last_temp:25.206295497604003,temp:25.206295497604003,target_temp:0,smoothed_temp:25.380938667990186 +[2026-05-04 01:15:56.809] [info] [clocksync.cpp:219] [1990] mcu 'bed_sensor': Ignoring clock sample: sent_time=272.309964796,time_avg=242.7734127611422,freq=119998811.98518054,diff=220618.33740997314(0.0018384861450831094),stddev=3091.4467368790724 +[2026-05-04 01:15:56.863] [info] [clocksync.cpp:219] [1988] mcu 'mcu': Ignoring clock sample: sent_time=272.344337504,time_avg=242.80696868697953,freq=24000000.328616407,diff=63922.11203098297(0.0026634213346242905),stddev=426.2820016962599 +[2026-05-04 01:15:56.883] [info] [clocksync.cpp:219] [1996] mcu 'toolhead': Ignoring clock sample: sent_time=272.373613588,time_avg=242.38207203464165,freq=119998579.82601768,diff=296279.8497695923(0.0024689987480799357),stddev=3112.744193494429 +[2026-05-04 01:15:57.791] [info] [clocksync.cpp:219] [1990] mcu 'bed_sensor': Ignoring clock sample: sent_time=273.294050005,time_avg=242.7734127611422,freq=119998811.98518054,diff=276192.3652229309(0.0023016030435244242),stddev=3091.4467368790724 +[2026-05-04 01:15:57.826] [info] [clocksync.cpp:219] [1988] mcu 'mcu': Ignoring clock sample: sent_time=273.328125546,time_avg=242.80696868697953,freq=24000000.328616407,diff=42769.78074169159(0.0017820741975704828),stddev=426.2820016962599 +[2026-05-04 01:15:57.852] [info] [clocksync.cpp:219] [1996] mcu 'toolhead': Ignoring clock sample: sent_time=273.353692588,time_avg=242.38207203464165,freq=119998579.82601768,diff=250565.73246765137(0.0020880477705637612),stddev=3112.744193494429 +[2026-05-04 01:16:35.286] [warning] [clocksync.cpp:181] [1936] queries_pending 2 +[2026-05-04 01:16:38.244] [warning] [clocksync.cpp:181] [1936] queries_pending 2 +[2026-05-04 01:16:41.200] [warning] [clocksync.cpp:181] [1936] queries_pending 2 +[2026-05-04 01:16:42.186] [warning] [clocksync.cpp:181] [1936] queries_pending 3 +[2026-05-04 01:16:43.172] [warning] [clocksync.cpp:181] [1936] queries_pending 4 +[2026-05-04 01:16:44.158] [warning] [clocksync.cpp:181] [1936] queries_pending 5 +[2026-05-04 01:16:44.933] [info] [filament_motion_sensor.cpp:146] [1936] CMD_encoder_sensor_switch:true +[2026-05-04 01:16:44.933] [info] [webhooks.cpp:170] [1936] return total: {"id":31,"result":{}} +[2026-05-04 01:16:45.143] [warning] [clocksync.cpp:181] [1936] queries_pending 6 +[2026-05-04 01:16:45.147] [warning] [mcu.cpp:1363] [1936] Timeout with MCU mcu eventtime: 320.580991402 +[2026-05-04 01:16:45.148] [info] [printer.cpp:231] [1936] msg:Lost communication with MCU 'mcu' in_shutdown_state:false +[2026-05-04 01:16:45.148] [info] [webhooks.cpp:1333] [1945] update_except_status error_code: 803 error_level: 1 +[2026-05-04 01:16:45.149] [info] [device_status.cpp:1080] [1945] Add exception code: 803 +[2026-05-04 01:16:45.149] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO exception_message (code, timestamp, level, upload_flag) VALUES (?, ?, ?, ?); +[2026-05-04 01:16:45.150] [info] [gcode.cpp:553] [1936] respond_ecode: , error_code: 803 error_level 1 +[2026-05-04 01:16:45.153] [info] [webhooks.cpp:505] [1936] handle_shutdown : 505___ ok +[2026-05-04 01:16:45.154] [warning] [gcode_move.cpp:885] [1936] gcode state: absolute_coord=1 absolute_extrude=1 base_position=(0.000000 0.000000 0.000000 0.000000) last_position=(5.000000 5.000000 -0.119271 0.000000) homing_position=(0.000000 0.000000 0.000000 0.000000) speed_factor=0.000000 extrude_factor=0.016667 speed=1.000000 + +[2026-05-04 01:16:45.154] [info] [heaters.cpp:579] [1936] handle_shutdown : 579___ ok +[2026-05-04 01:16:45.154] [info] [virtual_sdcard.cpp:335] [1936] start saving supplement info. +[2026-05-04 01:16:45.156] [info] [config_manager.cpp:350] [1936] save supplement info success +[2026-05-04 01:16:45.157] [info] [serialhdl.cpp:502] [1990] mcu 'bed_sensor': got handle_output name: #output message: command_emergency_stop: shutdown Command request +[2026-05-04 01:16:45.157] [warning] [serialhdl.cpp:553] [1990] response->len:12,params['clock']:1098121872,params['static_string_id']:8 mcu mcu 'bed_sensor': shutdown! +[2026-05-04 01:16:45.158] [info] [config_manager.cpp:486] [1936] save persistent supplement info success +[2026-05-04 01:16:45.159] [info] [serialhdl.cpp:502] [1996] mcu 'toolhead': got handle_output name: #output message: command_emergency_stop: shutdown Command request +[2026-05-04 01:16:45.159] [warning] [serialhdl.cpp:553] [1996] response->len:12,params['clock']:1044888932,params['static_string_id']:8 mcu mcu 'toolhead': shutdown! +[2026-05-04 01:16:45.160] [error] [mcu.cpp:1488] [1996] mcu toolhead clock32 1044888932 clock64 35404627300 shutdown id 8 msg Command request +[2026-05-04 01:16:45.161] [error] [mcu.cpp:1488] [1990] mcu bed_sensor clock32 1098121872 clock64 35457860240 shutdown id 8 msg Command request +[2026-05-04 01:16:45.158] [info] [virtual_sdcard.cpp:338] [1936] start saving print process data. +[2026-05-04 01:16:45.166] [info] [virtual_sdcard.cpp:376] [1936] handle_power_outage No data needs to be saved before the actual printing. +[2026-05-04 01:16:45.166] [info] [virtual_sdcard.cpp:330] [1936] handle_shutdown : 330___ ok +[2026-05-04 01:16:45.166] [info] [heaters.cpp:579] [1936] handle_shutdown : 579___ ok +[2026-05-04 01:16:45.170] [info] [heaters.cpp:579] [1936] handle_shutdown : 579___ ok +[2026-05-04 01:16:45.170] [info] [error_mcu.cpp:163] [1936] _handle_notify_mcu_shutdown : 163___ ok +[2026-05-04 01:16:45.175] [info] [printer.cpp:231] [1936] msg:MCU shutdown in_shutdown_state:true +[2026-05-04 01:16:45.177] [info] [printer.cpp:231] [1936] msg:MCU shutdown in_shutdown_state:true +[2026-05-04 01:16:45.182] [info] [device_status.cpp:1100] [1945] Save exception code: [803] to local database +[2026-05-04 01:16:45.183] [warning] [device_status.cpp:1033] [1945] DeviceStatus::update_except_status: 803 +[2026-05-04 01:16:45.183] [warning] [device_status.cpp:1048] [1945] Exception Status Changed: {"machine_status":{"exception_status":[803]}} +[2026-05-04 01:16:45.193] [error] [mcu.cpp:1496] [1996] MCU 'toolhead' shutdown: Command request +clocksync state: mcu_freq=120000000 last_clock=35289206890 clock_est=(290.584394 31803925028 119998578.272211) min_half_rtt=0.000251 min_rtt_time=110.883641 time_avg=290.584143(893.429082) clock_avg=31803925028.674057(107210219582.526703) pred_variance=3321494.085058 clock_adj=(1.845 119998566.500) +Dumping serial stats: bytes_write=3255 bytes_read=30507 bytes_retransmit=0 bytes_invalid=0 send_seq=442 receive_seq=442 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 +Dumping send queue 100 messages +Sent 0 223.110920 223.110680 6: seq: 16, get_clock +Sent 1 224.095899 224.095659 6: seq: 17, get_clock +Sent 2 225.080087 225.079847 6: seq: 18, get_clock +Sent 3 226.064500 226.064260 6: seq: 19, get_clock +Sent 4 227.049366 227.049126 6: seq: 1a, get_clock +Sent 5 228.034004 228.033764 6: seq: 1b, get_clock +Sent 6 229.018201 229.017961 6: seq: 1c, get_clock +Sent 7 230.002369 230.002129 6: seq: 1d, get_clock +Sent 8 230.986356 230.986116 6: seq: 1e, get_clock +Sent 9 231.971227 231.970987 6: seq: 1f, get_clock +Sent 10 232.965797 232.965557 6: seq: 10, get_clock +Sent 11 233.950778 233.950538 6: seq: 11, get_clock +Sent 12 234.935721 234.935481 6: seq: 12, get_clock +Sent 13 235.920545 235.920305 6: seq: 13, get_clock +Sent 14 236.905305 236.905065 6: seq: 14, get_clock +Sent 15 237.889359 237.889119 6: seq: 15, get_clock +Sent 16 238.873456 238.873216 6: seq: 16, get_clock +Sent 17 239.858157 239.857917 6: seq: 17, get_clock +Sent 18 240.842493 240.842253 6: seq: 18, get_clock +Sent 19 241.827422 241.827182 6: seq: 19, get_clock +Sent 20 242.812136 242.811896 6: seq: 1a, get_clock +Sent 21 243.796780 243.796540 6: seq: 1b, get_clock +Sent 22 244.781071 244.780831 6: seq: 1c, get_clock +Sent 23 245.765345 245.765105 6: seq: 1d, get_clock +Sent 24 246.749777 246.749537 6: seq: 1e, get_clock +Sent 25 247.734058 247.733818 6: seq: 1f, get_clock +Sent 26 248.718273 248.718033 6: seq: 10, get_clock +Sent 27 249.702303 249.702063 6: seq: 11, get_clock +Sent 28 250.687146 250.686906 6: seq: 12, get_clock +Sent 29 251.671630 251.671390 6: seq: 13, get_clock +Sent 30 252.656162 252.655922 6: seq: 14, get_clock +Sent 31 253.640711 253.640471 6: seq: 15, get_clock +Sent 32 254.624789 254.624549 6: seq: 16, get_clock +Sent 33 255.609595 255.609355 6: seq: 17, get_clock +Sent 34 256.593666 256.593426 6: seq: 18, get_clock +Sent 35 257.578638 257.578398 6: seq: 19, get_clock +Sent 36 258.563214 258.562974 6: seq: 1a, get_clock +Sent 37 259.548463 259.548223 6: seq: 1b, get_clock +Sent 38 260.532543 260.532303 6: seq: 1c, get_clock +Sent 39 261.517214 261.516974 6: seq: 1d, get_clock +Sent 40 262.501473 262.501233 6: seq: 1e, get_clock +Sent 41 263.496969 263.496729 6: seq: 1f, get_clock +Sent 42 264.481061 264.480820 6: seq: 10, get_clock +Sent 43 265.465943 265.465703 6: seq: 11, get_clock +Sent 44 266.450469 266.450229 6: seq: 12, get_clock +Sent 45 267.435297 267.435057 6: seq: 13, get_clock +Sent 46 268.419359 268.419119 6: seq: 14, get_clock +Sent 47 269.403887 269.403647 6: seq: 15, get_clock +Sent 48 270.388824 270.388584 6: seq: 16, get_clock +Sent 49 271.372881 271.372641 6: seq: 17, get_clock +Sent 50 272.373614 272.373374 6: seq: 18, get_clock +Sent 51 273.353693 273.353453 6: seq: 19, get_clock +Sent 52 274.336916 274.336676 6: seq: 1a, get_clock +Sent 53 275.321044 275.320804 6: seq: 1b, get_clock +Sent 54 276.305278 276.305038 6: seq: 1c, get_clock +Sent 55 277.289926 277.289686 6: seq: 1d, get_clock +Sent 56 278.274370 278.274130 6: seq: 1e, get_clock +Sent 57 279.258705 279.258465 6: seq: 1f, get_clock +Sent 58 280.242608 280.242368 6: seq: 10, get_clock +Sent 59 281.227193 281.226953 6: seq: 11, get_clock +Sent 60 282.211391 282.211151 6: seq: 12, get_clock +Sent 61 283.196225 283.195985 6: seq: 13, get_clock +Sent 62 284.180215 284.179975 6: seq: 14, get_clock +Sent 63 285.164874 285.164634 6: seq: 15, get_clock +Sent 64 286.149548 286.149308 6: seq: 16, get_clock +Sent 65 287.133790 287.133550 6: seq: 17, get_clock +Sent 66 288.118197 288.117957 6: seq: 18, get_clock +Sent 67 289.102538 289.102298 6: seq: 19, get_clock +Sent 68 290.086672 290.086432 6: seq: 1a, get_clock +Sent 69 291.071207 291.070967 6: seq: 1b, get_clock +Sent 70 292.055940 292.055700 6: seq: 1c, get_clock +Sent 71 293.039998 293.039758 6: seq: 1d, get_clock +Sent 72 294.032129 294.031889 6: seq: 1e, get_clock +Sent 73 295.016416 295.016176 6: seq: 1f, get_clock +Sent 74 296.001250 296.001010 6: seq: 10, get_clock +Sent 75 296.985549 296.985309 6: seq: 11, get_clock +Sent 76 297.970231 297.969991 6: seq: 12, get_clock +Sent 77 298.954789 298.954549 6: seq: 13, get_clock +Sent 78 299.939162 299.938922 6: seq: 14, get_clock +Sent 79 300.923494 300.923254 6: seq: 15, get_clock +Sent 80 301.908390 301.908150 6: seq: 16, get_clock +Sent 81 302.892477 302.892237 6: seq: 17, get_clock +Sent 82 303.876756 303.876516 6: seq: 18, get_clock +Sent 83 304.860684 304.860444 6: seq: 19, get_clock +Sent 84 305.845221 305.844981 6: seq: 1a, get_clock +Sent 85 306.829470 306.829230 6: seq: 1b, get_clock +Sent 86 307.813893 307.813653 6: seq: 1c, get_clock +Sent 87 308.798815 308.798575 6: seq: 1d, get_clock +Sent 88 309.783695 309.783455 6: seq: 1e, get_clock +Sent 89 310.767773 310.767533 6: seq: 1f, get_clock +Sent 90 311.752531 311.752291 6: seq: 10, get_clock +Sent 91 312.737023 312.736783 6: seq: 11, get_clock +Sent 92 313.721931 313.721691 6: seq: 12, get_clock +Sent 93 314.706080 314.705840 6: seq: 13, get_clock +Sent 94 315.690329 315.690089 6: seq: 14, get_clock +Sent 95 316.674930 316.674690 6: seq: 15, get_clock +Sent 96 317.659452 317.659212 6: seq: 16, get_clock +Sent 97 318.643962 318.643722 6: seq: 17, get_clock +Sent 98 319.628509 319.628269 6: seq: 18, get_clock +Sent 99 320.590352 320.590112 6: seq: 19, emergency_stop +Dumping receive queue 100 messages +Receive 0 301.908927 301.908390 11: seq: 17, clock clock=3098047128 +Receive 1 301.999006 301.908390 19: seq: 17, counter_state oid=2 next_clock=3108998682 count=1 count_clock=621009754 +Receive 2 302.019023 301.908390 19: seq: 17, counter_state oid=4 next_clock=3111398682 count=1 count_clock=623409754 +Receive 3 302.124174 301.908390 15: seq: 17, analog_in_state oid=41 next_clock=3183038682 value=32176 +Receive 4 302.624164 301.908390 15: seq: 17, analog_in_state oid=41 next_clock=3243038682 value=32181 +Receive 5 302.893045 302.892477 11: seq: 18, clock clock=3216140178 +Receive 6 303.000022 302.892477 19: seq: 18, counter_state oid=2 next_clock=3229118682 count=1 count_clock=621009754 +Receive 7 303.020070 302.892477 19: seq: 18, counter_state oid=4 next_clock=3231518682 count=1 count_clock=623409754 +Receive 8 303.124170 302.892477 15: seq: 18, analog_in_state oid=41 next_clock=3303038682 value=32182 +Receive 9 303.624199 302.892477 15: seq: 18, analog_in_state oid=41 next_clock=3363038682 value=32174 +Receive 10 303.877288 303.876756 11: seq: 19, clock clock=3334247952 +Receive 11 304.001052 303.876756 19: seq: 19, counter_state oid=2 next_clock=3349238682 count=1 count_clock=621009754 +Receive 12 304.021033 303.876756 19: seq: 19, counter_state oid=4 next_clock=3351638682 count=1 count_clock=623409754 +Receive 13 304.124189 303.876756 15: seq: 19, analog_in_state oid=41 next_clock=3423038682 value=32175 +Receive 14 304.624190 303.876756 15: seq: 19, analog_in_state oid=41 next_clock=3483038682 value=32185 +Receive 15 304.861216 304.860684 11: seq: 1a, clock clock=3452318328 +Receive 16 305.002040 304.860684 19: seq: 1a, counter_state oid=2 next_clock=3469358682 count=1 count_clock=621009754 +Receive 17 305.022282 304.860684 19: seq: 1a, counter_state oid=4 next_clock=3471758682 count=1 count_clock=623409754 +Receive 18 305.124208 304.860684 15: seq: 1a, analog_in_state oid=41 next_clock=3543038682 value=32194 +Receive 19 305.551978 304.860684 13: seq: 1a, stats count=75 sum=52573 sumsq=269660 +Receive 20 305.624276 304.860684 15: seq: 1a, analog_in_state oid=41 next_clock=3603038682 value=32184 +Receive 21 305.845751 305.845221 11: seq: 1b, clock clock=3570461058 +Receive 22 306.003122 305.845221 19: seq: 1b, counter_state oid=2 next_clock=3589478682 count=1 count_clock=621009754 +Receive 23 306.023181 305.845221 19: seq: 1b, counter_state oid=4 next_clock=3591878682 count=1 count_clock=623409754 +Receive 24 306.124232 305.845221 15: seq: 1b, analog_in_state oid=41 next_clock=3663038682 value=32188 +Receive 25 306.624229 305.845221 15: seq: 1b, analog_in_state oid=41 next_clock=3723038682 value=32171 +Receive 26 306.830016 306.829470 11: seq: 1c, clock clock=3688569738 +Receive 27 307.004075 306.829470 19: seq: 1c, counter_state oid=2 next_clock=3709598682 count=1 count_clock=621009754 +Receive 28 307.024056 306.829470 19: seq: 1c, counter_state oid=4 next_clock=3711998682 count=1 count_clock=623409754 +Receive 29 307.124229 306.829470 15: seq: 1c, analog_in_state oid=41 next_clock=3783038682 value=32190 +Receive 30 307.624228 306.829470 15: seq: 1c, analog_in_state oid=41 next_clock=3843038682 value=32185 +Receive 31 307.814415 307.813893 11: seq: 1d, clock clock=3806699052 +Receive 32 308.005080 307.813893 19: seq: 1d, counter_state oid=2 next_clock=3829718682 count=1 count_clock=621009754 +Receive 33 308.025075 307.813893 19: seq: 1d, counter_state oid=4 next_clock=3832118682 count=1 count_clock=623409754 +Receive 34 308.124257 307.813893 15: seq: 1d, analog_in_state oid=41 next_clock=3903038682 value=32191 +Receive 35 308.624237 307.813893 15: seq: 1d, analog_in_state oid=41 next_clock=3963038682 value=32176 +Receive 36 308.799430 308.798815 11: seq: 1e, clock clock=3924888012 +Receive 37 309.006082 308.798815 19: seq: 1e, counter_state oid=2 next_clock=3949838682 count=1 count_clock=621009754 +Receive 38 309.026071 308.798815 19: seq: 1e, counter_state oid=4 next_clock=3952238682 count=1 count_clock=623409754 +Receive 39 309.124251 308.798815 15: seq: 1e, analog_in_state oid=41 next_clock=4023038682 value=32181 +Receive 40 309.624252 308.798815 15: seq: 1e, analog_in_state oid=41 next_clock=4083038682 value=32187 +Receive 41 309.784254 309.783695 11: seq: 1f, clock clock=4043076798 +Receive 42 310.007098 309.783695 19: seq: 1f, counter_state oid=2 next_clock=4069958682 count=1 count_clock=621009754 +Receive 43 310.027098 309.783695 19: seq: 1f, counter_state oid=4 next_clock=4072358682 count=1 count_clock=623409754 +Receive 44 310.124267 309.783695 15: seq: 1f, analog_in_state oid=41 next_clock=4143038682 value=32185 +Receive 45 310.552037 309.783695 13: seq: 1f, stats count=76 sum=52414 sumsq=264767 +Receive 46 310.624297 309.783695 15: seq: 1f, analog_in_state oid=41 next_clock=4203038682 value=32175 +Receive 47 310.768298 310.767773 11: seq: 10, clock clock=4161160662 +Receive 48 311.008103 310.767773 19: seq: 10, counter_state oid=2 next_clock=4190078682 count=1 count_clock=621009754 +Receive 49 311.028125 310.767773 19: seq: 10, counter_state oid=4 next_clock=4192478682 count=1 count_clock=623409754 +Receive 50 311.124283 310.767773 14: seq: 10, analog_in_state oid=41 next_clock=4263038682 value=32183 +Receive 51 311.624281 310.767773 14: seq: 10, analog_in_state oid=41 next_clock=28071386 value=32185 +Receive 52 311.753066 311.752531 10: seq: 11, clock clock=4279329738 +Receive 53 312.009110 311.752531 18: seq: 11, counter_state oid=2 next_clock=15231386 count=1 count_clock=621009754 +Receive 54 312.029146 311.752531 18: seq: 11, counter_state oid=4 next_clock=17631386 count=1 count_clock=623409754 +Receive 55 312.124281 311.752531 14: seq: 11, analog_in_state oid=41 next_clock=88071386 value=32188 +Receive 56 312.624297 311.752531 14: seq: 11, analog_in_state oid=41 next_clock=148071386 value=32185 +Receive 57 312.737527 312.737023 10: seq: 12, clock clock=102499316 +Receive 58 313.010134 312.737023 18: seq: 12, counter_state oid=2 next_clock=135351386 count=1 count_clock=621009754 +Receive 59 313.030136 312.737023 18: seq: 12, counter_state oid=4 next_clock=137751386 count=1 count_clock=623409754 +Receive 60 313.124384 312.737023 15: seq: 12, analog_in_state oid=41 next_clock=208071386 value=32185 +Receive 61 313.624334 312.737023 15: seq: 12, analog_in_state oid=41 next_clock=268071386 value=32177 +Receive 62 313.722462 313.721931 11: seq: 13, clock clock=220688276 +Receive 63 314.011147 313.721931 19: seq: 13, counter_state oid=2 next_clock=255471386 count=1 count_clock=621009754 +Receive 64 314.031160 313.721931 19: seq: 13, counter_state oid=4 next_clock=257871386 count=1 count_clock=623409754 +Receive 65 314.124390 313.721931 15: seq: 13, analog_in_state oid=41 next_clock=328071386 value=32182 +Receive 66 314.624395 313.721931 15: seq: 13, analog_in_state oid=41 next_clock=388071386 value=32184 +Receive 67 314.706607 314.706080 11: seq: 14, clock clock=338784536 +Receive 68 315.012169 314.706080 19: seq: 14, counter_state oid=2 next_clock=375591386 count=1 count_clock=621009754 +Receive 69 315.032246 314.706080 19: seq: 14, counter_state oid=4 next_clock=377991386 count=1 count_clock=623409754 +Receive 70 315.124401 314.706080 15: seq: 14, analog_in_state oid=41 next_clock=448071386 value=32179 +Receive 71 315.552135 314.706080 13: seq: 14, stats count=75 sum=52103 sumsq=264768 +Receive 72 315.624394 314.706080 15: seq: 14, analog_in_state oid=41 next_clock=508071386 value=32177 +Receive 73 315.690878 315.690329 11: seq: 15, clock clock=456893462 +Receive 74 316.013167 315.690329 19: seq: 15, counter_state oid=2 next_clock=495711386 count=1 count_clock=621009754 +Receive 75 316.033176 315.690329 19: seq: 15, counter_state oid=4 next_clock=498111386 count=1 count_clock=623409754 +Receive 76 316.124406 315.690329 15: seq: 15, analog_in_state oid=41 next_clock=568071386 value=32183 +Receive 77 316.624415 315.690329 15: seq: 15, analog_in_state oid=41 next_clock=628071386 value=32182 +Receive 78 316.675465 316.674930 11: seq: 16, clock clock=575045216 +Receive 79 317.014183 316.674930 19: seq: 16, counter_state oid=2 next_clock=615831386 count=1 count_clock=621009754 +Receive 80 317.034186 316.674930 19: seq: 16, counter_state oid=4 next_clock=618231386 count=1 count_clock=623409754 +Receive 81 317.124348 316.674930 15: seq: 16, analog_in_state oid=41 next_clock=688071386 value=32187 +Receive 82 317.624432 316.674930 15: seq: 16, analog_in_state oid=41 next_clock=748071386 value=32176 +Receive 83 317.659973 317.659452 11: seq: 17, clock clock=693185012 +Receive 84 318.015213 317.659452 19: seq: 17, counter_state oid=2 next_clock=735951386 count=1 count_clock=621009754 +Receive 85 318.035176 317.659452 19: seq: 17, counter_state oid=4 next_clock=738351386 count=1 count_clock=623409754 +Receive 86 318.124490 317.659452 15: seq: 17, analog_in_state oid=41 next_clock=808071386 value=32185 +Receive 87 318.624435 317.659452 15: seq: 17, analog_in_state oid=41 next_clock=868071386 value=32176 +Receive 88 318.644559 318.643962 11: seq: 18, clock clock=811324556 +Receive 89 319.016339 318.643962 19: seq: 18, counter_state oid=2 next_clock=856071386 count=1 count_clock=621009754 +Receive 90 319.036276 318.643962 19: seq: 18, counter_state oid=4 next_clock=858471386 count=1 count_clock=623409754 +Receive 91 319.124414 318.643962 15: seq: 18, analog_in_state oid=41 next_clock=928071386 value=32181 +Receive 92 319.624424 318.643962 15: seq: 18, analog_in_state oid=41 next_clock=988071386 value=32174 +Receive 93 319.629032 319.628509 11: seq: 19, clock clock=929468522 +Receive 94 320.017223 319.628509 19: seq: 19, counter_state oid=2 next_clock=976191386 count=1 count_clock=621009754 +Receive 95 320.037201 319.628509 19: seq: 19, counter_state oid=4 next_clock=978591386 count=1 count_clock=623409754 +Receive 96 320.124454 319.628509 15: seq: 19, analog_in_state oid=41 next_clock=1048071386 value=32176 +Receive 97 320.552144 319.628509 13: seq: 19, stats count=75 sum=52108 sumsq=264477 +Receive 98 320.592734 320.590352 45: seq: 1a, #output "command_emergency_stop: shutdown Command request" +Receive 99 320.594088 320.590352 12: seq: 1a, shutdown clock=1044888932 static_string_id=8 +[2026-05-04 01:16:45.193] [info] [por.cpp:240] [1996] por handle_mcu_shutdown +[2026-05-04 01:16:45.208] [error] [mcu.cpp:1496] [1990] MCU 'bed_sensor' shutdown: Command request +clocksync state: mcu_freq=120000000 last_clock=35454653970 clock_est=(291.611674 31980471964 119998808.504580) min_half_rtt=0.000163 min_rtt_time=217.168293 time_avg=291.611511(879.852724) clock_avg=31980471964.460800(105581278536.859451) pred_variance=2444215.241538 clock_adj=(1.401 119998801.750) +Dumping serial stats: bytes_write=2850 bytes_read=10441 bytes_retransmit=0 bytes_invalid=0 send_seq=420 receive_seq=420 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 +Dumping send queue 100 messages +Sent 0 224.060888 224.060768 6: seq: 10, get_clock +Sent 1 225.045085 225.044965 6: seq: 11, get_clock +Sent 2 226.029080 226.028960 6: seq: 12, get_clock +Sent 3 227.013388 227.013268 6: seq: 13, get_clock +Sent 4 227.997838 227.997718 6: seq: 14, get_clock +Sent 5 228.982126 228.982006 6: seq: 15, get_clock +Sent 6 229.966407 229.966287 6: seq: 16, get_clock +Sent 7 230.962398 230.962278 6: seq: 17, get_clock +Sent 8 231.935192 231.935072 6: seq: 18, get_clock +Sent 9 232.919755 232.919635 6: seq: 19, get_clock +Sent 10 233.904493 233.904373 6: seq: 1a, get_clock +Sent 11 234.888531 234.888411 6: seq: 1b, get_clock +Sent 12 235.873129 235.873009 6: seq: 1c, get_clock +Sent 13 236.857086 236.856966 6: seq: 1d, get_clock +Sent 14 237.842056 237.841936 6: seq: 1e, get_clock +Sent 15 238.826084 238.825964 6: seq: 1f, get_clock +Sent 16 239.810775 239.810655 6: seq: 10, get_clock +Sent 17 240.795191 240.795071 6: seq: 11, get_clock +Sent 18 241.780123 241.780003 6: seq: 12, get_clock +Sent 19 242.764855 242.764735 6: seq: 13, get_clock +Sent 20 243.749485 243.749365 6: seq: 14, get_clock +Sent 21 244.733930 244.733810 6: seq: 15, get_clock +Sent 22 245.718180 245.718060 6: seq: 16, get_clock +Sent 23 246.702393 246.702273 6: seq: 17, get_clock +Sent 24 247.686870 247.686750 6: seq: 18, get_clock +Sent 25 248.670969 248.670849 6: seq: 19, get_clock +Sent 26 249.655919 249.655799 6: seq: 1a, get_clock +Sent 27 250.639973 250.639853 6: seq: 1b, get_clock +Sent 28 251.624052 251.623932 6: seq: 1c, get_clock +Sent 29 252.608807 252.608687 6: seq: 1d, get_clock +Sent 30 253.593504 253.593384 6: seq: 1e, get_clock +Sent 31 254.577502 254.577382 6: seq: 1f, get_clock +Sent 32 255.562467 255.562347 6: seq: 10, get_clock +Sent 33 256.546426 256.546306 6: seq: 11, get_clock +Sent 34 257.531182 257.531062 6: seq: 12, get_clock +Sent 35 258.515984 258.515864 6: seq: 13, get_clock +Sent 36 259.500272 259.500152 6: seq: 14, get_clock +Sent 37 260.493472 260.493352 6: seq: 15, get_clock +Sent 38 261.478161 261.478041 6: seq: 16, get_clock +Sent 39 262.462633 262.462513 6: seq: 17, get_clock +Sent 40 263.446671 263.446551 6: seq: 18, get_clock +Sent 41 264.430830 264.430710 6: seq: 19, get_clock +Sent 42 265.415802 265.415682 6: seq: 1a, get_clock +Sent 43 266.400229 266.400109 6: seq: 1b, get_clock +Sent 44 267.385113 267.384993 6: seq: 1c, get_clock +Sent 45 268.369138 268.369018 6: seq: 1d, get_clock +Sent 46 269.353646 269.353526 6: seq: 1e, get_clock +Sent 47 270.338457 270.338337 6: seq: 1f, get_clock +Sent 48 271.322573 271.322453 6: seq: 10, get_clock +Sent 49 272.309965 272.309845 6: seq: 11, get_clock +Sent 50 273.294050 273.293930 6: seq: 12, get_clock +Sent 51 274.276502 274.276382 6: seq: 13, get_clock +Sent 52 275.260599 275.260479 6: seq: 14, get_clock +Sent 53 276.244658 276.244538 6: seq: 15, get_clock +Sent 54 277.229594 277.229474 6: seq: 16, get_clock +Sent 55 278.213879 278.213759 6: seq: 17, get_clock +Sent 56 279.198840 279.198720 6: seq: 18, get_clock +Sent 57 280.183301 280.183181 6: seq: 19, get_clock +Sent 58 281.167888 281.167768 6: seq: 1a, get_clock +Sent 59 282.151919 282.151799 6: seq: 1b, get_clock +Sent 60 283.136885 283.136765 6: seq: 1c, get_clock +Sent 61 284.120866 284.120746 6: seq: 1d, get_clock +Sent 62 285.105502 285.105382 6: seq: 1e, get_clock +Sent 63 286.090070 286.089950 6: seq: 1f, get_clock +Sent 64 287.074370 287.074250 6: seq: 10, get_clock +Sent 65 288.058951 288.058831 6: seq: 11, get_clock +Sent 66 289.043087 289.042967 6: seq: 12, get_clock +Sent 67 290.028395 290.028275 6: seq: 13, get_clock +Sent 68 291.012880 291.012760 6: seq: 14, get_clock +Sent 69 291.997485 291.997365 6: seq: 15, get_clock +Sent 70 292.981754 292.981634 6: seq: 16, get_clock +Sent 71 293.965666 293.965546 6: seq: 17, get_clock +Sent 72 294.949748 294.949628 6: seq: 18, get_clock +Sent 73 295.934679 295.934559 6: seq: 19, get_clock +Sent 74 296.918954 296.918834 6: seq: 1a, get_clock +Sent 75 297.903766 297.903646 6: seq: 1b, get_clock +Sent 76 298.888102 298.887982 6: seq: 1c, get_clock +Sent 77 299.872721 299.872601 6: seq: 1d, get_clock +Sent 78 300.857080 300.856960 6: seq: 1e, get_clock +Sent 79 301.842052 301.841932 6: seq: 1f, get_clock +Sent 80 302.826801 302.826681 6: seq: 10, get_clock +Sent 81 303.810972 303.810852 6: seq: 11, get_clock +Sent 82 304.795930 304.795810 6: seq: 12, get_clock +Sent 83 305.780393 305.780273 6: seq: 13, get_clock +Sent 84 306.764804 306.764684 6: seq: 14, get_clock +Sent 85 307.749425 307.749305 6: seq: 15, get_clock +Sent 86 308.734300 308.734180 6: seq: 16, get_clock +Sent 87 309.719142 309.719022 6: seq: 17, get_clock +Sent 88 310.703245 310.703125 6: seq: 18, get_clock +Sent 89 311.687806 311.687686 6: seq: 19, get_clock +Sent 90 312.672479 312.672359 6: seq: 1a, get_clock +Sent 91 313.656742 313.656622 6: seq: 1b, get_clock +Sent 92 314.641426 314.641306 6: seq: 1c, get_clock +Sent 93 315.626347 315.626227 6: seq: 1d, get_clock +Sent 94 316.611023 316.610903 6: seq: 1e, get_clock +Sent 95 317.595738 317.595618 6: seq: 1f, get_clock +Sent 96 318.582441 318.582321 6: seq: 10, get_clock +Sent 97 319.566842 319.566722 6: seq: 11, get_clock +Sent 98 320.563307 320.563187 6: seq: 12, get_clock +Sent 99 320.590011 320.589891 6: seq: 13, emergency_stop +Dumping receive queue 100 messages +Receive 0 240.795555 240.795191 10: seq: 12, clock clock=112771258 +Receive 1 241.780731 241.780123 11: seq: 13, clock clock=230963578 +Receive 2 242.765204 242.764855 11: seq: 14, clock clock=349127634 +Receive 3 243.749825 243.749485 11: seq: 15, clock clock=467281216 +Receive 4 244.734270 244.733930 11: seq: 16, clock clock=585413394 +Receive 5 245.107383 244.733930 13: seq: 16, stats count=55 sum=20175 sumsq=43401 +Receive 6 245.718522 245.718180 11: seq: 17, clock clock=703522266 +Receive 7 246.702739 246.702393 11: seq: 18, clock clock=821626886 +Receive 8 247.687231 247.686870 11: seq: 19, clock clock=939763992 +Receive 9 248.671313 248.670969 11: seq: 1a, clock clock=1057854058 +Receive 10 249.656282 249.655919 11: seq: 1b, clock clock=1176047508 +Receive 11 250.107437 249.655919 13: seq: 1b, stats count=55 sum=20178 sumsq=47754 +Receive 12 250.640310 250.639973 11: seq: 1c, clock clock=1294131164 +Receive 13 251.624472 251.624052 11: seq: 1d, clock clock=1412219452 +Receive 14 252.609164 252.608807 11: seq: 1e, clock clock=1530390354 +Receive 15 253.593850 253.593504 11: seq: 1f, clock clock=1648551940 +Receive 16 254.577900 254.577502 11: seq: 10, clock clock=1766636458 +Receive 17 255.107503 254.577502 13: seq: 10, stats count=56 sum=20491 sumsq=46065 +Receive 18 255.562869 255.562467 11: seq: 11, clock clock=1884827860 +Receive 19 256.546793 256.546426 11: seq: 12, clock clock=2002900520 +Receive 20 257.531529 257.531182 11: seq: 13, clock clock=2121068768 +Receive 21 258.516326 258.515984 11: seq: 14, clock clock=2239243866 +Receive 22 259.500615 259.500272 11: seq: 15, clock clock=2357357918 +Receive 23 260.107523 259.500272 13: seq: 15, stats count=55 sum=20176 sumsq=43416 +Receive 24 260.493837 260.493472 11: seq: 16, clock clock=2476540562 +Receive 25 261.478524 261.478161 11: seq: 17, clock clock=2594701668 +Receive 26 262.462982 262.462633 11: seq: 18, clock clock=2712837446 +Receive 27 263.447034 263.446671 11: seq: 19, clock clock=2830922628 +Receive 28 264.431179 264.430830 11: seq: 1a, clock clock=2949019300 +Receive 29 265.107588 264.430830 13: seq: 1a, stats count=55 sum=20176 sumsq=43416 +Receive 30 265.416150 265.415802 11: seq: 1b, clock clock=3067213400 +Receive 31 266.400597 266.400229 11: seq: 1c, clock clock=3185345818 +Receive 32 267.385456 267.385113 11: seq: 1d, clock clock=3303529060 +Receive 33 268.369485 268.369138 11: seq: 1e, clock clock=3421610868 +Receive 34 269.353992 269.353646 11: seq: 1f, clock clock=3539750430 +Receive 35 270.107625 269.353646 13: seq: 1f, stats count=56 sum=20501 sumsq=43916 +Receive 36 270.338796 270.338457 11: seq: 10, clock clock=3657926346 +Receive 37 271.322913 271.322573 11: seq: 11, clock clock=3776019220 +Receive 38 272.316206 272.309965 11: seq: 12, clock clock=3894726440 +Receive 39 273.298748 273.294050 11: seq: 13, clock clock=4012871070 +Receive 40 274.276850 274.276502 11: seq: 14, clock clock=4130487432 +Receive 41 275.107677 274.276502 13: seq: 14, stats count=55 sum=20190 sumsq=43538 +Receive 42 275.260948 275.260599 10: seq: 15, clock clock=4248577314 +Receive 43 276.245010 276.244658 10: seq: 16, clock clock=71696202 +Receive 44 277.229949 277.229594 10: seq: 17, clock clock=189888212 +Receive 45 278.214235 278.213879 11: seq: 18, clock clock=308002334 +Receive 46 279.199178 279.198840 11: seq: 19, clock clock=426194358 +Receive 47 280.107721 279.198840 13: seq: 19, stats count=55 sum=20156 sumsq=44323 +Receive 48 280.183656 280.183301 11: seq: 1a, clock clock=544329318 +Receive 49 281.168223 281.167888 11: seq: 1b, clock clock=662477676 +Receive 50 282.152272 282.151919 11: seq: 1c, clock clock=780560752 +Receive 51 283.137237 283.136885 11: seq: 1d, clock clock=898755882 +Receive 52 284.121214 284.120866 11: seq: 1e, clock clock=1016831830 +Receive 53 285.105880 285.105502 11: seq: 1f, clock clock=1134991524 +Receive 54 285.107764 285.105502 13: seq: 1f, stats count=57 sum=21607 sumsq=56868 +Receive 55 286.090408 286.090070 11: seq: 10, clock clock=1253133896 +Receive 56 287.074709 287.074370 11: seq: 11, clock clock=1371249092 +Receive 57 288.059304 288.058951 11: seq: 12, clock clock=1489397252 +Receive 58 289.043436 289.043087 11: seq: 13, clock clock=1607492922 +Receive 59 290.028846 290.028395 11: seq: 14, clock clock=1725728936 +Receive 60 290.107840 290.028395 13: seq: 14, stats count=55 sum=20178 sumsq=43433 +Receive 61 291.013217 291.012880 11: seq: 15, clock clock=1843864956 +Receive 62 291.997842 291.997485 11: seq: 16, clock clock=1962017844 +Receive 63 292.982113 292.981754 11: seq: 17, clock clock=2080128636 +Receive 64 293.966007 293.965666 11: seq: 18, clock clock=2198196282 +Receive 65 294.950097 294.949748 11: seq: 19, clock clock=2316285868 +Receive 66 295.107886 294.949748 13: seq: 19, stats count=55 sum=20178 sumsq=43433 +Receive 67 295.935018 295.934679 11: seq: 1a, clock clock=2434475182 +Receive 68 296.919296 296.918954 11: seq: 1b, clock clock=2552587214 +Receive 69 297.904114 297.903766 11: seq: 1c, clock clock=2670764272 +Receive 70 298.888445 298.888102 11: seq: 1d, clock clock=2788882630 +Receive 71 299.873076 299.872721 11: seq: 1e, clock clock=2907036918 +Receive 72 300.107955 299.872721 13: seq: 1e, stats count=56 sum=20501 sumsq=43916 +Receive 73 300.857417 300.857080 11: seq: 1f, clock clock=3025157238 +Receive 74 301.842407 301.842052 11: seq: 10, clock clock=3143354062 +Receive 75 302.827168 302.826801 11: seq: 11, clock clock=3261524824 +Receive 76 303.811310 303.810972 11: seq: 12, clock clock=3379621116 +Receive 77 304.796299 304.795930 11: seq: 13, clock clock=3497814876 +Receive 78 305.107976 304.795930 13: seq: 13, stats count=55 sum=20172 sumsq=43382 +Receive 79 305.780803 305.780393 11: seq: 14, clock clock=3615950104 +Receive 80 306.765147 306.764804 11: seq: 15, clock clock=3734078414 +Receive 81 307.749772 307.749425 11: seq: 16, clock clock=3852230922 +Receive 82 308.734648 308.734300 11: seq: 17, clock clock=3970415562 +Receive 83 309.719484 309.719142 11: seq: 18, clock clock=4088594272 +Receive 84 310.108018 309.719142 13: seq: 18, stats count=55 sum=20192 sumsq=43555 +Receive 85 310.703587 310.703245 11: seq: 19, clock clock=4206685270 +Receive 86 311.688158 311.687806 10: seq: 1a, clock clock=29865598 +Receive 87 312.672850 312.672479 10: seq: 1b, clock clock=148025122 +Receive 88 313.657079 313.656742 11: seq: 1c, clock clock=266134276 +Receive 89 314.641822 314.641426 11: seq: 1d, clock clock=384295806 +Receive 90 315.108081 314.641426 13: seq: 1d, stats count=56 sum=20463 sumsq=47953 +Receive 91 315.626685 315.626347 11: seq: 1e, clock clock=502484836 +Receive 92 316.611386 316.611023 11: seq: 1f, clock clock=620644714 +Receive 93 317.596068 317.595738 11: seq: 10, clock clock=738809306 +Receive 94 318.582795 318.582441 11: seq: 11, clock clock=857213504 +Receive 95 319.567186 319.566842 11: seq: 12, clock clock=975340346 +Receive 96 320.108131 319.566842 13: seq: 12, stats count=55 sum=20181 sumsq=45609 +Receive 97 320.563669 320.563307 11: seq: 13, clock clock=1094915602 +Receive 98 320.590940 320.590011 45: seq: 14, #output "command_emergency_stop: shutdown Command request" +Receive 99 320.591638 320.590011 12: seq: 14, shutdown clock=1098121872 static_string_id=8 +[2026-05-04 01:16:45.209] [info] [por.cpp:240] [1990] por handle_mcu_shutdown +[2026-05-04 01:16:45.654] [error] [main.cpp:102] [1986] Got error -1 in read: (11)Resource temporarily unavailable +[2026-05-04 01:16:46.129] [warning] [clocksync.cpp:181] [1936] queries_pending 7 +[2026-05-04 01:16:47.115] [warning] [clocksync.cpp:181] [1936] queries_pending 8 +[2026-05-04 01:16:48.101] [warning] [clocksync.cpp:181] [1936] queries_pending 9 +[2026-05-04 01:16:49.088] [warning] [clocksync.cpp:181] [1936] queries_pending 10 +[2026-05-04 01:16:50.075] [warning] [clocksync.cpp:181] [1936] queries_pending 11 +[2026-05-04 01:16:51.061] [warning] [clocksync.cpp:181] [1936] queries_pending 12 +[2026-05-04 01:16:52.048] [warning] [clocksync.cpp:181] [1936] queries_pending 13 +[2026-05-04 01:16:53.035] [warning] [clocksync.cpp:181] [1936] queries_pending 14 +[2026-05-04 01:16:54.022] [warning] [clocksync.cpp:181] [1936] queries_pending 15 +[2026-05-04 01:16:55.009] [warning] [clocksync.cpp:181] [1936] queries_pending 16 +[2026-05-04 01:16:55.996] [warning] [clocksync.cpp:181] [1936] queries_pending 17 +[2026-05-04 01:16:56.982] [warning] [clocksync.cpp:181] [1936] queries_pending 18 +[2026-05-04 01:16:57.969] [warning] [clocksync.cpp:181] [1936] queries_pending 19 +[2026-05-04 01:16:58.955] [warning] [clocksync.cpp:181] [1936] queries_pending 20 +[2026-05-04 01:16:59.942] [warning] [clocksync.cpp:181] [1936] queries_pending 21 +[2026-05-04 01:17:00.929] [warning] [clocksync.cpp:181] [1936] queries_pending 22 +[2026-05-04 01:17:01.915] [warning] [clocksync.cpp:181] [1936] queries_pending 23 +[2026-05-04 01:17:02.902] [warning] [clocksync.cpp:181] [1936] queries_pending 24 +[2026-05-04 01:17:03.889] [warning] [clocksync.cpp:181] [1936] queries_pending 25 +[2026-05-04 01:17:04.875] [warning] [clocksync.cpp:181] [1936] queries_pending 26 +[2026-05-04 01:17:05.861] [warning] [clocksync.cpp:181] [1936] queries_pending 27 +[2026-05-04 01:17:06.847] [warning] [clocksync.cpp:181] [1936] queries_pending 28 +[2026-05-04 01:17:07.834] [warning] [clocksync.cpp:181] [1936] queries_pending 29 +[2026-05-04 01:17:08.821] [warning] [clocksync.cpp:181] [1936] queries_pending 30 +[2026-05-04 01:17:09.807] [warning] [clocksync.cpp:181] [1936] queries_pending 31 +[2026-05-04 01:17:10.794] [warning] [clocksync.cpp:181] [1936] queries_pending 32 +[2026-05-04 01:17:11.780] [warning] [clocksync.cpp:181] [1936] queries_pending 33 +[2026-05-04 01:17:12.766] [warning] [clocksync.cpp:181] [1936] queries_pending 34 +[2026-05-04 01:17:13.752] [warning] [clocksync.cpp:181] [1936] queries_pending 35 +[2026-05-04 01:17:14.737] [warning] [clocksync.cpp:181] [1936] queries_pending 36 +[2026-05-04 01:17:15.724] [warning] [clocksync.cpp:181] [1936] queries_pending 37 +[2026-05-04 01:17:16.709] [warning] [clocksync.cpp:181] [1936] queries_pending 38 +[2026-05-04 01:17:17.695] [warning] [clocksync.cpp:181] [1936] queries_pending 39 +[2026-05-04 01:17:18.681] [warning] [clocksync.cpp:181] [1936] queries_pending 40 +[2026-05-04 01:17:19.667] [warning] [clocksync.cpp:181] [1936] queries_pending 41 +[2026-05-04 01:17:20.654] [warning] [clocksync.cpp:181] [1936] queries_pending 42 +[2026-05-04 01:17:21.639] [warning] [clocksync.cpp:181] [1936] queries_pending 43 +[2026-05-04 01:17:22.625] [warning] [clocksync.cpp:181] [1936] queries_pending 44 +[2026-05-04 01:17:23.612] [warning] [clocksync.cpp:181] [1936] queries_pending 45 +[2026-05-04 01:17:24.598] [warning] [clocksync.cpp:181] [1936] queries_pending 46 +[2026-05-04 01:17:25.584] [warning] [clocksync.cpp:181] [1936] queries_pending 47 +[2026-05-04 01:17:26.570] [warning] [clocksync.cpp:181] [1936] queries_pending 48 +[2026-05-04 01:17:27.556] [warning] [clocksync.cpp:181] [1936] queries_pending 49 +[2026-05-04 01:17:28.542] [warning] [clocksync.cpp:181] [1936] queries_pending 50 +[2026-05-04 01:17:29.529] [warning] [clocksync.cpp:181] [1936] queries_pending 51 +[2026-05-04 01:17:30.514] [warning] [clocksync.cpp:181] [1936] queries_pending 52 +[2026-05-04 01:17:31.500] [warning] [clocksync.cpp:181] [1936] queries_pending 53 +[2026-05-04 01:17:32.486] [warning] [clocksync.cpp:181] [1936] queries_pending 54 +[2026-05-04 01:17:33.472] [warning] [clocksync.cpp:181] [1936] queries_pending 55 +[2026-05-04 01:17:34.458] [warning] [clocksync.cpp:181] [1936] queries_pending 56 +[2026-05-04 01:17:35.443] [warning] [clocksync.cpp:181] [1936] queries_pending 57 +[2026-05-04 01:17:36.429] [warning] [clocksync.cpp:181] [1936] queries_pending 58 +[2026-05-04 01:17:37.416] [warning] [clocksync.cpp:181] [1936] queries_pending 59 +[2026-05-04 01:17:38.401] [warning] [clocksync.cpp:181] [1936] queries_pending 60 +[2026-05-04 01:17:39.387] [warning] [clocksync.cpp:181] [1936] queries_pending 61 +[2026-05-04 01:17:40.373] [warning] [clocksync.cpp:181] [1936] queries_pending 62 +[2026-05-04 01:17:41.358] [warning] [clocksync.cpp:181] [1936] queries_pending 63 +[2026-05-04 01:17:42.344] [warning] [clocksync.cpp:181] [1936] queries_pending 64 +[2026-05-04 01:17:43.330] [warning] [clocksync.cpp:181] [1936] queries_pending 65 +[2026-05-04 01:17:44.316] [warning] [clocksync.cpp:181] [1936] queries_pending 66 +[2026-05-04 01:17:45.303] [warning] [clocksync.cpp:181] [1936] queries_pending 67 +[2026-05-04 01:17:46.289] [warning] [clocksync.cpp:181] [1936] queries_pending 68 +[2026-05-04 01:17:47.274] [warning] [clocksync.cpp:181] [1936] queries_pending 69 +[2026-05-04 01:17:48.260] [warning] [clocksync.cpp:181] [1936] queries_pending 70 +[2026-05-04 01:17:49.245] [warning] [clocksync.cpp:181] [1936] queries_pending 71 +[2026-05-04 01:17:50.231] [warning] [clocksync.cpp:181] [1936] queries_pending 72 +[2026-05-04 01:17:51.216] [warning] [clocksync.cpp:181] [1936] queries_pending 73 +[2026-05-04 01:17:52.202] [warning] [clocksync.cpp:181] [1936] queries_pending 74 +[2026-05-04 01:17:53.188] [warning] [clocksync.cpp:181] [1936] queries_pending 75 +[2026-05-04 01:17:54.173] [warning] [clocksync.cpp:181] [1936] queries_pending 76 +[2026-05-04 01:17:55.158] [warning] [clocksync.cpp:181] [1936] queries_pending 77 +[2026-05-04 01:17:55.809] [info] [heaters.cpp:423] [1996] __func__:temperature_callback,heater_name:extruder,read_time:367.4221980877954,last_temp:25.585490868995578,temp:25.585490868995578,target_temp:0,smoothed_temp:25.497492825076783 +[2026-05-04 01:17:56.143] [warning] [clocksync.cpp:181] [1936] queries_pending 78 +[2026-05-04 01:17:57.128] [warning] [clocksync.cpp:181] [1936] queries_pending 79 +[2026-05-04 01:17:58.114] [warning] [clocksync.cpp:181] [1936] queries_pending 80 +[2026-05-04 01:17:59.100] [warning] [clocksync.cpp:181] [1936] queries_pending 81 +[2026-05-04 01:18:00.086] [warning] [clocksync.cpp:181] [1936] queries_pending 82 +[2026-05-04 01:18:01.072] [warning] [clocksync.cpp:181] [1936] queries_pending 83 +[2026-05-04 01:18:02.057] [warning] [clocksync.cpp:181] [1936] queries_pending 84 +[2026-05-04 01:18:03.043] [warning] [clocksync.cpp:181] [1936] queries_pending 85 +[2026-05-04 01:18:04.028] [warning] [clocksync.cpp:181] [1936] queries_pending 86 +[2026-05-04 01:18:05.013] [warning] [clocksync.cpp:181] [1936] queries_pending 87 +[2026-05-04 01:18:05.999] [warning] [clocksync.cpp:181] [1936] queries_pending 88 +[2026-05-04 01:18:06.984] [warning] [clocksync.cpp:181] [1936] queries_pending 89 +[2026-05-04 01:18:07.969] [warning] [clocksync.cpp:181] [1936] queries_pending 90 +[2026-05-04 01:18:08.955] [warning] [clocksync.cpp:181] [1936] queries_pending 91 +[2026-05-04 01:18:09.941] [warning] [clocksync.cpp:181] [1936] queries_pending 92 +[2026-05-04 01:18:10.926] [warning] [clocksync.cpp:181] [1936] queries_pending 93 +[2026-05-04 01:18:11.912] [warning] [clocksync.cpp:181] [1936] queries_pending 94 +[2026-05-04 01:18:12.897] [warning] [clocksync.cpp:181] [1936] queries_pending 95 +[2026-05-04 01:18:13.883] [warning] [clocksync.cpp:181] [1936] queries_pending 96 +[2026-05-04 01:18:14.868] [warning] [clocksync.cpp:181] [1936] queries_pending 97 +[2026-05-04 01:18:15.862] [warning] [clocksync.cpp:181] [1936] queries_pending 98 +[2026-05-04 01:18:16.847] [warning] [clocksync.cpp:181] [1936] queries_pending 99 +[2026-05-04 01:18:17.832] [warning] [clocksync.cpp:181] [1936] queries_pending 100 +[2026-05-04 01:18:18.817] [warning] [clocksync.cpp:181] [1936] queries_pending 101 +[2026-05-04 01:18:19.803] [warning] [clocksync.cpp:181] [1936] queries_pending 102 +[2026-05-04 01:18:20.789] [warning] [clocksync.cpp:181] [1936] queries_pending 103 +[2026-05-04 01:18:21.775] [warning] [clocksync.cpp:181] [1936] queries_pending 104 +[2026-05-04 01:18:22.760] [warning] [clocksync.cpp:181] [1936] queries_pending 105 +[2026-05-04 01:18:23.746] [warning] [clocksync.cpp:181] [1936] queries_pending 106 +[2026-05-04 01:18:24.731] [warning] [clocksync.cpp:181] [1936] queries_pending 107 +[2026-05-04 01:18:25.717] [warning] [clocksync.cpp:181] [1936] queries_pending 108 +[2026-05-04 01:18:26.702] [warning] [clocksync.cpp:181] [1936] queries_pending 109 +[2026-05-04 01:18:27.687] [warning] [clocksync.cpp:181] [1936] queries_pending 110 +[2026-05-04 01:18:28.673] [warning] [clocksync.cpp:181] [1936] queries_pending 111 +[2026-05-04 01:18:29.658] [warning] [clocksync.cpp:181] [1936] queries_pending 112 +[2026-05-04 01:18:30.644] [warning] [clocksync.cpp:181] [1936] queries_pending 113 +[2026-05-04 01:18:31.630] [warning] [clocksync.cpp:181] [1936] queries_pending 114 +[2026-05-04 01:18:32.615] [warning] [clocksync.cpp:181] [1936] queries_pending 115 +[2026-05-04 01:18:33.600] [warning] [clocksync.cpp:181] [1936] queries_pending 116 +[2026-05-04 01:18:34.586] [warning] [clocksync.cpp:181] [1936] queries_pending 117 +[2026-05-04 01:18:35.571] [warning] [clocksync.cpp:181] [1936] queries_pending 118 +[2026-05-04 01:18:36.556] [warning] [clocksync.cpp:181] [1936] queries_pending 119 +[2026-05-04 01:18:37.541] [warning] [clocksync.cpp:181] [1936] queries_pending 120 +[2026-05-04 01:18:38.527] [warning] [clocksync.cpp:181] [1936] queries_pending 121 +[2026-05-04 01:18:39.512] [warning] [clocksync.cpp:181] [1936] queries_pending 122 +[2026-05-04 01:18:40.498] [warning] [clocksync.cpp:181] [1936] queries_pending 123 +[2026-05-04 01:18:41.484] [warning] [clocksync.cpp:181] [1936] queries_pending 124 +[2026-05-04 01:18:42.469] [warning] [clocksync.cpp:181] [1936] queries_pending 125 +[2026-05-04 01:18:43.455] [warning] [clocksync.cpp:181] [1936] queries_pending 126 +[2026-05-04 01:18:44.440] [warning] [clocksync.cpp:181] [1936] queries_pending 127 +[2026-05-04 01:18:45.425] [warning] [clocksync.cpp:181] [1936] queries_pending 128 +[2026-05-04 01:18:46.410] [warning] [clocksync.cpp:181] [1936] queries_pending 129 +[2026-05-04 01:18:47.395] [warning] [clocksync.cpp:181] [1936] queries_pending 130 +[2026-05-04 01:18:48.381] [warning] [clocksync.cpp:181] [1936] queries_pending 131 +[2026-05-04 01:18:49.367] [warning] [clocksync.cpp:181] [1936] queries_pending 132 +[2026-05-04 01:18:50.352] [warning] [clocksync.cpp:181] [1936] queries_pending 133 +[2026-05-04 01:18:51.337] [warning] [clocksync.cpp:181] [1936] queries_pending 134 +[2026-05-04 01:18:52.322] [warning] [clocksync.cpp:181] [1936] queries_pending 135 +[2026-05-04 01:18:53.308] [warning] [clocksync.cpp:181] [1936] queries_pending 136 +[2026-05-04 01:18:54.293] [warning] [clocksync.cpp:181] [1936] queries_pending 137 +[2026-05-04 01:18:55.278] [warning] [clocksync.cpp:181] [1936] queries_pending 138 +[2026-05-04 01:18:56.264] [warning] [clocksync.cpp:181] [1936] queries_pending 139 +[2026-05-04 01:18:57.249] [warning] [clocksync.cpp:181] [1936] queries_pending 140 +[2026-05-04 01:18:58.235] [warning] [clocksync.cpp:181] [1936] queries_pending 141 +[2026-05-04 01:18:59.220] [warning] [clocksync.cpp:181] [1936] queries_pending 142 +[2026-05-04 01:19:00.206] [warning] [clocksync.cpp:181] [1936] queries_pending 143 +[2026-05-04 01:19:01.191] [warning] [clocksync.cpp:181] [1936] queries_pending 144 +[2026-05-04 01:19:02.176] [warning] [clocksync.cpp:181] [1936] queries_pending 145 +[2026-05-04 01:19:03.161] [warning] [clocksync.cpp:181] [1936] queries_pending 146 +[2026-05-04 01:19:04.146] [warning] [clocksync.cpp:181] [1936] queries_pending 147 +[2026-05-04 01:19:05.131] [warning] [clocksync.cpp:181] [1936] queries_pending 148 +[2026-05-04 01:19:06.116] [warning] [clocksync.cpp:181] [1936] queries_pending 149 +[2026-05-04 01:19:07.101] [warning] [clocksync.cpp:181] [1936] queries_pending 150 +[2026-05-04 01:19:08.086] [warning] [clocksync.cpp:181] [1936] queries_pending 151 +[2026-05-04 01:19:09.072] [warning] [clocksync.cpp:181] [1936] queries_pending 152 +[2026-05-04 01:19:10.057] [warning] [clocksync.cpp:181] [1936] queries_pending 153 +[2026-05-04 01:19:11.042] [warning] [clocksync.cpp:181] [1936] queries_pending 154 +[2026-05-04 01:19:12.027] [warning] [clocksync.cpp:181] [1936] queries_pending 155 +[2026-05-04 01:19:13.012] [warning] [clocksync.cpp:181] [1936] queries_pending 156 +[2026-05-04 01:19:13.997] [warning] [clocksync.cpp:181] [1936] queries_pending 157 +[2026-05-04 01:19:14.982] [warning] [clocksync.cpp:181] [1936] queries_pending 158 +[2026-05-04 01:19:15.976] [warning] [clocksync.cpp:181] [1936] queries_pending 159 +[2026-05-04 01:19:16.961] [warning] [clocksync.cpp:181] [1936] queries_pending 160 +[2026-05-04 01:19:17.946] [warning] [clocksync.cpp:181] [1936] queries_pending 161 +[2026-05-04 01:19:18.931] [warning] [clocksync.cpp:181] [1936] queries_pending 162 +[2026-05-04 01:19:19.916] [warning] [clocksync.cpp:181] [1936] queries_pending 163 +[2026-05-04 01:19:20.901] [warning] [clocksync.cpp:181] [1936] queries_pending 164 +[2026-05-04 01:19:21.887] [warning] [clocksync.cpp:181] [1936] queries_pending 165 +[2026-05-04 01:19:22.872] [warning] [clocksync.cpp:181] [1936] queries_pending 166 +[2026-05-04 01:19:23.857] [warning] [clocksync.cpp:181] [1936] queries_pending 167 +[2026-05-04 01:19:24.842] [warning] [clocksync.cpp:181] [1936] queries_pending 168 +[2026-05-04 01:19:25.827] [warning] [clocksync.cpp:181] [1936] queries_pending 169 +[2026-05-04 01:19:26.812] [warning] [clocksync.cpp:181] [1936] queries_pending 170 +[2026-05-04 01:19:27.797] [warning] [clocksync.cpp:181] [1936] queries_pending 171 +[2026-05-04 01:19:28.783] [warning] [clocksync.cpp:181] [1936] queries_pending 172 +[2026-05-04 01:19:29.768] [warning] [clocksync.cpp:181] [1936] queries_pending 173 +[2026-05-04 01:19:30.752] [warning] [clocksync.cpp:181] [1936] queries_pending 174 +[2026-05-04 01:19:31.737] [warning] [clocksync.cpp:181] [1936] queries_pending 175 +[2026-05-04 01:19:32.723] [warning] [clocksync.cpp:181] [1936] queries_pending 176 +[2026-05-04 01:19:33.708] [warning] [clocksync.cpp:181] [1936] queries_pending 177 +[2026-05-04 01:19:34.693] [warning] [clocksync.cpp:181] [1936] queries_pending 178 +[2026-05-04 01:19:35.678] [warning] [clocksync.cpp:181] [1936] queries_pending 179 +[2026-05-04 01:19:36.663] [warning] [clocksync.cpp:181] [1936] queries_pending 180 +[2026-05-04 01:19:37.648] [warning] [clocksync.cpp:181] [1936] queries_pending 181 +[2026-05-04 01:19:38.634] [warning] [clocksync.cpp:181] [1936] queries_pending 182 +[2026-05-04 01:19:39.619] [warning] [clocksync.cpp:181] [1936] queries_pending 183 +[2026-05-04 01:19:40.604] [warning] [clocksync.cpp:181] [1936] queries_pending 184 +[2026-05-04 01:19:41.589] [warning] [clocksync.cpp:181] [1936] queries_pending 185 +[2026-05-04 01:19:42.574] [warning] [clocksync.cpp:181] [1936] queries_pending 186 +[2026-05-04 01:19:43.560] [warning] [clocksync.cpp:181] [1936] queries_pending 187 +[2026-05-04 01:19:44.544] [warning] [clocksync.cpp:181] [1936] queries_pending 188 +[2026-05-04 01:19:45.530] [warning] [clocksync.cpp:181] [1936] queries_pending 189 +[2026-05-04 01:19:46.515] [warning] [clocksync.cpp:181] [1936] queries_pending 190 +[2026-05-04 01:19:47.500] [warning] [clocksync.cpp:181] [1936] queries_pending 191 +[2026-05-04 01:19:48.485] [warning] [clocksync.cpp:181] [1936] queries_pending 192 +[2026-05-04 01:19:49.470] [warning] [clocksync.cpp:181] [1936] queries_pending 193 +[2026-05-04 01:19:50.455] [warning] [clocksync.cpp:181] [1936] queries_pending 194 +[2026-05-04 01:19:51.441] [warning] [clocksync.cpp:181] [1936] queries_pending 195 +[2026-05-04 01:19:52.426] [warning] [clocksync.cpp:181] [1936] queries_pending 196 +[2026-05-04 01:19:53.411] [warning] [clocksync.cpp:181] [1936] queries_pending 197 +[2026-05-04 01:19:54.396] [warning] [clocksync.cpp:181] [1936] queries_pending 198 +[2026-05-04 01:19:55.382] [warning] [clocksync.cpp:181] [1936] queries_pending 199 +[2026-05-04 01:19:55.902] [info] [heaters.cpp:423] [1996] __func__:temperature_callback,heater_name:extruder,read_time:487.4235842229707,last_temp:25.358656847849204,temp:25.358656847849204,target_temp:0,smoothed_temp:25.19550230359886 +[2026-05-04 01:19:56.367] [warning] [clocksync.cpp:181] [1936] queries_pending 200 +[2026-05-04 01:19:57.352] [warning] [clocksync.cpp:181] [1936] queries_pending 201 +[2026-05-04 01:19:58.337] [warning] [clocksync.cpp:181] [1936] queries_pending 202 +[2026-05-04 01:19:59.323] [warning] [clocksync.cpp:181] [1936] queries_pending 203 +[2026-05-04 01:20:00.308] [warning] [clocksync.cpp:181] [1936] queries_pending 204 +[2026-05-04 01:20:01.293] [warning] [clocksync.cpp:181] [1936] queries_pending 205 +[2026-05-04 01:20:02.278] [warning] [clocksync.cpp:181] [1936] queries_pending 206 +[2026-05-04 01:20:03.263] [warning] [clocksync.cpp:181] [1936] queries_pending 207 +[2026-05-04 01:20:04.248] [warning] [clocksync.cpp:181] [1936] queries_pending 208 +[2026-05-04 01:20:05.233] [warning] [clocksync.cpp:181] [1936] queries_pending 209 +[2026-05-04 01:20:06.218] [warning] [clocksync.cpp:181] [1936] queries_pending 210 +[2026-05-04 01:20:07.203] [warning] [clocksync.cpp:181] [1936] queries_pending 211 +[2026-05-04 01:20:08.188] [warning] [clocksync.cpp:181] [1936] queries_pending 212 +[2026-05-04 01:20:09.173] [warning] [clocksync.cpp:181] [1936] queries_pending 213 +[2026-05-04 01:20:10.158] [warning] [clocksync.cpp:181] [1936] queries_pending 214 +[2026-05-04 01:20:11.143] [warning] [clocksync.cpp:181] [1936] queries_pending 215 +[2026-05-04 01:20:12.128] [warning] [clocksync.cpp:181] [1936] queries_pending 216 +[2026-05-04 01:20:13.113] [warning] [clocksync.cpp:181] [1936] queries_pending 217 +[2026-05-04 01:20:14.098] [warning] [clocksync.cpp:181] [1936] queries_pending 218 +[2026-05-04 01:20:15.083] [warning] [clocksync.cpp:181] [1936] queries_pending 219 +[2026-05-04 01:20:16.074] [warning] [clocksync.cpp:181] [1936] queries_pending 220 +[2026-05-04 01:20:17.059] [warning] [clocksync.cpp:181] [1936] queries_pending 221 +[2026-05-04 01:20:18.044] [warning] [clocksync.cpp:181] [1936] queries_pending 222 +[2026-05-04 01:20:19.028] [warning] [clocksync.cpp:181] [1936] queries_pending 223 +[2026-05-04 01:20:20.013] [warning] [clocksync.cpp:181] [1936] queries_pending 224 +[2026-05-04 01:20:20.999] [warning] [clocksync.cpp:181] [1936] queries_pending 225 +[2026-05-04 01:20:21.984] [warning] [clocksync.cpp:181] [1936] queries_pending 226 +[2026-05-04 01:20:22.969] [warning] [clocksync.cpp:181] [1936] queries_pending 227 +[2026-05-04 01:20:23.954] [warning] [clocksync.cpp:181] [1936] queries_pending 228 +[2026-05-04 01:20:24.939] [warning] [clocksync.cpp:181] [1936] queries_pending 229 +[2026-05-04 01:20:25.925] [warning] [clocksync.cpp:181] [1936] queries_pending 230 +[2026-05-04 01:20:26.910] [warning] [clocksync.cpp:181] [1936] queries_pending 231 +[2026-05-04 01:20:27.895] [warning] [clocksync.cpp:181] [1936] queries_pending 232 +[2026-05-04 01:20:28.880] [warning] [clocksync.cpp:181] [1936] queries_pending 233 +[2026-05-04 01:20:29.865] [warning] [clocksync.cpp:181] [1936] queries_pending 234 +[2026-05-04 01:20:30.850] [warning] [clocksync.cpp:181] [1936] queries_pending 235 +[2026-05-04 01:20:31.835] [warning] [clocksync.cpp:181] [1936] queries_pending 236 +[2026-05-04 01:20:32.819] [warning] [clocksync.cpp:181] [1936] queries_pending 237 +[2026-05-04 01:20:33.804] [warning] [clocksync.cpp:181] [1936] queries_pending 238 +[2026-05-04 01:20:34.788] [warning] [clocksync.cpp:181] [1936] queries_pending 239 +[2026-05-04 01:20:35.773] [warning] [clocksync.cpp:181] [1936] queries_pending 240 +[2026-05-04 01:20:36.758] [warning] [clocksync.cpp:181] [1936] queries_pending 241 +[2026-05-04 01:20:37.743] [warning] [clocksync.cpp:181] [1936] queries_pending 242 +[2026-05-04 01:20:38.729] [warning] [clocksync.cpp:181] [1936] queries_pending 243 +[2026-05-04 01:20:39.714] [warning] [clocksync.cpp:181] [1936] queries_pending 244 +[2026-05-04 01:20:40.699] [warning] [clocksync.cpp:181] [1936] queries_pending 245 +[2026-05-04 01:20:41.684] [warning] [clocksync.cpp:181] [1936] queries_pending 246 +[2026-05-04 01:20:42.669] [warning] [clocksync.cpp:181] [1936] queries_pending 247 +[2026-05-04 01:20:43.654] [warning] [clocksync.cpp:181] [1936] queries_pending 248 +[2026-05-04 01:20:44.638] [warning] [clocksync.cpp:181] [1936] queries_pending 249 +[2026-05-04 01:20:45.624] [warning] [clocksync.cpp:181] [1936] queries_pending 250 +[2026-05-04 01:20:46.616] [warning] [clocksync.cpp:181] [1936] queries_pending 251 +[2026-05-04 01:20:47.601] [warning] [clocksync.cpp:181] [1936] queries_pending 252 +[2026-05-04 01:20:48.586] [warning] [clocksync.cpp:181] [1936] queries_pending 253 +[2026-05-04 01:20:49.571] [warning] [clocksync.cpp:181] [1936] queries_pending 254 +[2026-05-04 01:20:50.556] [warning] [clocksync.cpp:181] [1936] queries_pending 255 +[2026-05-04 01:20:51.542] [warning] [clocksync.cpp:181] [1936] queries_pending 256 +[2026-05-04 01:20:52.527] [warning] [clocksync.cpp:181] [1936] queries_pending 257 +[2026-05-04 01:20:53.512] [warning] [clocksync.cpp:181] [1936] queries_pending 258 +[2026-05-04 01:20:54.497] [warning] [clocksync.cpp:181] [1936] queries_pending 259 +[2026-05-04 01:20:55.482] [warning] [clocksync.cpp:181] [1936] queries_pending 260 +[2026-05-04 01:20:56.467] [warning] [clocksync.cpp:181] [1936] queries_pending 261 +[2026-05-04 01:20:57.452] [warning] [clocksync.cpp:181] [1936] queries_pending 262 +[2026-05-04 01:20:58.436] [warning] [clocksync.cpp:181] [1936] queries_pending 263 +[2026-05-04 01:20:59.421] [warning] [clocksync.cpp:181] [1936] queries_pending 264 +[2026-05-04 01:21:00.406] [warning] [clocksync.cpp:181] [1936] queries_pending 265 +[2026-05-04 01:21:01.391] [warning] [clocksync.cpp:181] [1936] queries_pending 266 +[2026-05-04 01:21:02.376] [warning] [clocksync.cpp:181] [1936] queries_pending 267 +[2026-05-04 01:21:03.362] [warning] [clocksync.cpp:181] [1936] queries_pending 268 +[2026-05-04 01:21:04.347] [warning] [clocksync.cpp:181] [1936] queries_pending 269 +[2026-05-04 01:21:05.332] [warning] [clocksync.cpp:181] [1936] queries_pending 270 +[2026-05-04 01:21:06.316] [warning] [clocksync.cpp:181] [1936] queries_pending 271 +[2026-05-04 01:21:07.301] [warning] [clocksync.cpp:181] [1936] queries_pending 272 +[2026-05-04 01:21:08.286] [warning] [clocksync.cpp:181] [1936] queries_pending 273 +[2026-05-04 01:21:09.271] [warning] [clocksync.cpp:181] [1936] queries_pending 274 +[2026-05-04 01:21:10.256] [warning] [clocksync.cpp:181] [1936] queries_pending 275 +[2026-05-04 01:21:11.241] [warning] [clocksync.cpp:181] [1936] queries_pending 276 +[2026-05-04 01:21:12.227] [warning] [clocksync.cpp:181] [1936] queries_pending 277 +[2026-05-04 01:21:13.211] [warning] [clocksync.cpp:181] [1936] queries_pending 278 +[2026-05-04 01:21:14.196] [warning] [clocksync.cpp:181] [1936] queries_pending 279 +[2026-05-04 01:21:15.182] [warning] [clocksync.cpp:181] [1936] queries_pending 280 +[2026-05-04 01:21:15.184] [info] [clocksync.cpp:219] [1990] mcu 'bed_sensor': Ignoring clock sample: sent_time=590.370133698,time_avg=560.8295508812668,freq=119998813.12679404,diff=64636.89875793457(0.0005386408229827881),stddev=2155.969326666365 +[2026-05-04 01:21:16.167] [warning] [clocksync.cpp:181] [1936] queries_pending 281 +[2026-05-04 01:21:17.159] [warning] [clocksync.cpp:181] [1936] queries_pending 282 +[2026-05-04 01:21:18.144] [warning] [clocksync.cpp:181] [1936] queries_pending 283 +[2026-05-04 01:21:19.129] [warning] [clocksync.cpp:181] [1936] queries_pending 284 +[2026-05-04 01:21:20.114] [warning] [clocksync.cpp:181] [1936] queries_pending 285 +[2026-05-04 01:21:21.099] [warning] [clocksync.cpp:181] [1936] queries_pending 286 +[2026-05-04 01:21:22.083] [warning] [clocksync.cpp:181] [1936] queries_pending 287 +[2026-05-04 01:21:23.068] [warning] [clocksync.cpp:181] [1936] queries_pending 288 +[2026-05-04 01:21:24.053] [warning] [clocksync.cpp:181] [1936] queries_pending 289 +[2026-05-04 01:21:25.038] [warning] [clocksync.cpp:181] [1936] queries_pending 290 +[2026-05-04 01:21:26.022] [warning] [clocksync.cpp:181] [1936] queries_pending 291 +[2026-05-04 01:21:27.007] [warning] [clocksync.cpp:181] [1936] queries_pending 292 +[2026-05-04 01:21:27.993] [warning] [clocksync.cpp:181] [1936] queries_pending 293 +[2026-05-04 01:21:28.977] [warning] [clocksync.cpp:181] [1936] queries_pending 294 +[2026-05-04 01:21:29.962] [warning] [clocksync.cpp:181] [1936] queries_pending 295 +[2026-05-04 01:21:30.947] [warning] [clocksync.cpp:181] [1936] queries_pending 296 +[2026-05-04 01:21:31.932] [warning] [clocksync.cpp:181] [1936] queries_pending 297 +[2026-05-04 01:21:32.917] [warning] [clocksync.cpp:181] [1936] queries_pending 298 +[2026-05-04 01:21:33.902] [warning] [clocksync.cpp:181] [1936] queries_pending 299 +[2026-05-04 01:21:34.887] [warning] [clocksync.cpp:181] [1936] queries_pending 300 +[2026-05-04 01:21:35.872] [warning] [clocksync.cpp:181] [1936] queries_pending 301 +[2026-05-04 01:21:36.857] [warning] [clocksync.cpp:181] [1936] queries_pending 302 +[2026-05-04 01:21:37.842] [warning] [clocksync.cpp:181] [1936] queries_pending 303 +[2026-05-04 01:21:38.827] [warning] [clocksync.cpp:181] [1936] queries_pending 304 +[2026-05-04 01:21:39.812] [warning] [clocksync.cpp:181] [1936] queries_pending 305 +[2026-05-04 01:21:40.797] [warning] [clocksync.cpp:181] [1936] queries_pending 306 +[2026-05-04 01:21:41.782] [warning] [clocksync.cpp:181] [1936] queries_pending 307 +[2026-05-04 01:21:42.767] [warning] [clocksync.cpp:181] [1936] queries_pending 308 +[2026-05-04 01:21:43.752] [warning] [clocksync.cpp:181] [1936] queries_pending 309 +[2026-05-04 01:21:44.736] [warning] [clocksync.cpp:181] [1936] queries_pending 310 +[2026-05-04 01:21:45.721] [warning] [clocksync.cpp:181] [1936] queries_pending 311 +[2026-05-04 01:21:46.705] [warning] [clocksync.cpp:181] [1936] queries_pending 312 +[2026-05-04 01:21:47.690] [warning] [clocksync.cpp:181] [1936] queries_pending 313 +[2026-05-04 01:21:48.676] [warning] [clocksync.cpp:181] [1936] queries_pending 314 +[2026-05-04 01:21:49.660] [warning] [clocksync.cpp:181] [1936] queries_pending 315 +[2026-05-04 01:21:50.645] [warning] [clocksync.cpp:181] [1936] queries_pending 316 +[2026-05-04 01:21:51.630] [warning] [clocksync.cpp:181] [1936] queries_pending 317 +[2026-05-04 01:21:52.615] [warning] [clocksync.cpp:181] [1936] queries_pending 318 +[2026-05-04 01:21:53.599] [warning] [clocksync.cpp:181] [1936] queries_pending 319 +[2026-05-04 01:21:54.584] [warning] [clocksync.cpp:181] [1936] queries_pending 320 +[2026-05-04 01:30:41.589] [info] [logger.cpp:80] [1945] elegoo log init finish! +[2026-05-04 01:30:41.677] [info] [main.cpp:209] [1945] inputtty:./config/printer,gcode_fd:4 +[2026-05-04 01:30:41.863] [info] [main.cpp:226] [1945] Starting Elegoo... +[2026-05-04 01:30:41.864] [info] [main.cpp:228] [1945] start_args.size:17,sizeof(long_options):9 +[2026-05-04 01:30:41.864] [info] [main.cpp:231] [1945] start_args[img_version]:00.00.00.00 +[2026-05-04 01:30:41.864] [info] [main.cpp:231] [1945] start_args[gui_version]:01.01.11.03 +[2026-05-04 01:30:41.865] [info] [main.cpp:231] [1945] start_args[elegoo_version]:03.26.17.07 +[2026-05-04 01:30:41.865] [info] [main.cpp:231] [1945] start_args[camera_version]:00.00.00.00 +[2026-05-04 01:30:41.865] [info] [main.cpp:231] [1945] start_args[canvas_version]:00.00.00.00 +[2026-05-04 01:30:41.865] [info] [main.cpp:231] [1945] start_args[ota_version]:01.03.02.36 +[2026-05-04 01:30:41.866] [info] [main.cpp:231] [1945] start_args[bed_sensor_version]:00.00.00.00 +[2026-05-04 01:30:41.866] [info] [main.cpp:231] [1945] start_args[start_reason]:startup +[2026-05-04 01:30:41.866] [info] [main.cpp:231] [1945] start_args[apiserver]:/tmp/elegoo_uds +[2026-05-04 01:30:41.866] [info] [main.cpp:231] [1945] start_args[toolhead_gd32_version]:00.00.00.00 +[2026-05-04 01:30:41.867] [info] [main.cpp:231] [1945] start_args[autosave_file]:/opt/usr/cfg/autosave.cfg +[2026-05-04 01:30:41.867] [info] [main.cpp:231] [1945] start_args[gcode_fd]:4 +[2026-05-04 01:30:41.867] [info] [main.cpp:231] [1945] start_args[config_file]:/opt/inst/printer_dsp.cfg +[2026-05-04 01:30:41.867] [info] [main.cpp:231] [1945] start_args[cpu_info]:2 core ARMv7 Processor rev 5 (v7l) +[2026-05-04 01:30:41.868] [info] [main.cpp:231] [1945] start_args[mcu_gd32_version]:00.00.00.00 +[2026-05-04 01:30:41.868] [info] [main.cpp:231] [1945] start_args[machine_model]:Centauri Carbon 2 +[2026-05-04 01:30:41.868] [info] [main.cpp:231] [1945] start_args[os_version]:01.02.12.01 +[2026-05-04 01:30:41.868] [info] [main.cpp:236] [1945] long_options[debuginput]:i +[2026-05-04 01:30:41.869] [info] [main.cpp:236] [1945] long_options[input-tty]:I +[2026-05-04 01:30:41.869] [info] [main.cpp:236] [1945] long_options[api-server]:a +[2026-05-04 01:30:41.869] [info] [main.cpp:236] [1945] long_options[logfile]:l +[2026-05-04 01:30:41.869] [info] [main.cpp:236] [1945] long_options[verbose]:v +[2026-05-04 01:30:41.870] [info] [main.cpp:236] [1945] long_options[debugoutput]:o +[2026-05-04 01:30:41.870] [info] [main.cpp:236] [1945] long_options[dictionary]:d +[2026-05-04 01:30:41.870] [info] [main.cpp:236] [1945] long_options[import-test]:t +[2026-05-04 01:30:41.897] [info] [printer.cpp:50] [1945] create Printer success! +[2026-05-04 01:30:41.898] [info] [printer.cpp:366] [1945] connect begin! +[2026-05-04 01:30:41.899] [info] [printer.cpp:284] [1945] read_config begin! +[2026-05-04 01:30:41.966] [info] [gcode.cpp:1927] [1957] create DeviceStatusWorker success!! +[2026-05-04 01:30:42.027] [info] [webhooks.cpp:607] [1945] create WebHooks success! +[2026-05-04 01:30:42.028] [info] [webhooks.cpp:384] [1945] create ServerSocket success! /tmp/elegoo_uds +[2026-05-04 01:30:42.029] [info] [webhooks.cpp:443] [1945] create ServerSocket success! +[2026-05-04 01:30:42.031] [info] [webhooks.cpp:1317] [1959] create DeviceExceptWorker success!! +[2026-05-04 01:30:42.371] [info] [config_manager.cpp:171] [1945] begin read sn info +[2026-05-04 01:30:42.374] [info] [config_manager.cpp:205] [1945] read product auth success, sn: F01CFFQQFN55YKS +[2026-05-04 01:30:42.378] [info] [config_manager.cpp:148] [1945] machine: {"machine":{"model":"Centauri Carbon 2"},"versions":[{"os_version":"01.02.12.01"},{"mcu_gd32_version":"00.00.00.00"},{"toolhead_gd32_version":"00.00.00.00"},{"bed_sensor_version":"00.00.00.00"},{"canvas_version":"00.00.00.00"},{"camera_version":"00.00.00.00"},{"elegoo_version":"03.26.17.07"},{"gui_version":"01.01.11.03"},{"ota_version":"01.03.02.36"},{"img_version":"00.00.00.00"}]} +[2026-05-04 01:30:42.380] [info] [config_manager.cpp:209] [1945] begin read supplement info +[2026-05-04 01:30:42.384] [info] [config_manager.cpp:306] [1945] token info: token: miM2yt, token_switch_enabled: true, is_lan_mode: true, power_outage_resume_enabled: true, region: 1 +[2026-05-04 01:30:42.389] [info] [config_manager.cpp:453] [1945] load persistent supplement info success +[2026-05-04 01:30:42.393] [info] [device_status.cpp:133] [1945] Create component manager for Centauri Carbon 2 +[2026-05-04 01:30:42.664] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_details GROUP BY filename HAVING MAX(create_time)); +[2026-05-04 01:30:42.685] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_thumbnail GROUP BY filename); +[2026-05-04 01:30:42.691] [info] [record_manager.cpp:302] [1945] Loaded 3 tasks from the database. +[2026-05-04 01:30:42.692] [info] [record_manager.cpp:307] [1945] end task info id a065d20a-a124-4f32-afca-a3dfb699ae8c name ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode status 2. +[2026-05-04 01:30:42.696] [info] [record_manager.cpp:318] [1945] Loaded 10 files from the database. +[2026-05-04 01:30:42.699] [info] [record_manager.cpp:323] [1945] Loaded 3 thumbnails from the database. +[2026-05-04 01:30:42.701] [info] [record_manager.cpp:328] [1945] Loaded 0 delete file records from the database. +[2026-05-04 01:30:42.704] [info] [sql_database.cpp:417] [1945] Loaded exception message: id 6, code 803 +[2026-05-04 01:30:42.704] [info] [sql_database.cpp:417] [1945] Loaded exception message: id 5, code 802 +[2026-05-04 01:30:42.705] [info] [sql_database.cpp:417] [1945] Loaded exception message: id 4, code 1263 +[2026-05-04 01:30:42.705] [info] [sql_database.cpp:417] [1945] Loaded exception message: id 3, code 1263 +[2026-05-04 01:30:42.706] [info] [sql_database.cpp:417] [1945] Loaded exception message: id 2, code 801 +[2026-05-04 01:30:42.707] [info] [sql_database.cpp:417] [1945] Loaded exception message: id 1, code 801 +[2026-05-04 01:30:42.711] [info] [record_manager.cpp:333] [1945] Loaded 6 exception messages from the database. +[2026-05-04 01:30:42.712] [info] [record_manager.cpp:827] [1945] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-04 01:30:42.714] [info] [record_manager.cpp:827] [1945] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-04 01:30:42.715] [info] [record_manager.cpp:827] [1945] File exists: /opt/usr/gcode/local/IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-04 01:30:42.717] [info] [record_manager.cpp:831] [1945] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-04 01:30:42.718] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:30:42.737] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:30:42.739] [info] [record_manager.cpp:344] [1945] check_db_files file[ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode] not exist system, clear it from database +[2026-05-04 01:30:42.741] [info] [record_manager.cpp:831] [1945] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-04 01:30:42.742] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:30:42.759] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:30:42.761] [info] [record_manager.cpp:344] [1945] check_db_files file[ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode] not exist system, clear it from database +[2026-05-04 01:30:42.763] [info] [record_manager.cpp:831] [1945] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-04 01:30:42.764] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:30:42.790] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:30:42.792] [info] [record_manager.cpp:344] [1945] check_db_files file[ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode] not exist system, clear it from database +[2026-05-04 01:30:42.794] [info] [record_manager.cpp:831] [1945] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-04 01:30:42.795] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:30:42.813] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:30:42.816] [info] [record_manager.cpp:344] [1945] check_db_files file[ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode] not exist system, clear it from database +[2026-05-04 01:30:42.818] [info] [record_manager.cpp:831] [1945] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-04 01:30:42.818] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:30:42.836] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:30:42.839] [info] [record_manager.cpp:344] [1945] check_db_files file[ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode] not exist system, clear it from database +[2026-05-04 01:30:42.841] [info] [record_manager.cpp:831] [1945] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-04 01:30:42.842] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:30:42.858] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:30:42.860] [info] [record_manager.cpp:344] [1945] check_db_files file[ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode] not exist system, clear it from database +[2026-05-04 01:30:42.862] [info] [record_manager.cpp:831] [1945] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-04 01:30:42.872] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:30:42.889] [info] [sql_database.cpp:164] [1945] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:30:42.891] [info] [record_manager.cpp:344] [1945] check_db_files file[ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode] not exist system, clear it from database +[2026-05-04 01:30:42.893] [info] [record_manager.cpp:361] [1945] Local file count 11 does not match cached file details 3, need to parse online files. +[2026-05-04 01:30:42.899] [info] [record_manager.cpp:607] [1945] Parsing local files in /opt/usr/gcode/local/ +[2026-05-04 01:30:42.900] [info] [record_manager.cpp:623] [1945] File ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode already exists in cache, skipping parsing. +[2026-05-04 01:30:42.901] [info] [record_manager.cpp:496] [1945] Parsing local file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-04 01:30:42.902] [error] [record_manager.cpp:32] [1945] stat failed /opt/usr/gcode/local//ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-04 01:30:42.902] [info] [record_manager.cpp:383] [1945] color map size: 0 +[2026-05-04 01:30:42.903] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:30:42.925] [info] [record_manager.cpp:512] [1945] Parsed file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:30:42.926] [info] [record_manager.cpp:496] [1945] Parsing local file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-04 01:30:42.927] [error] [record_manager.cpp:32] [1945] stat failed /opt/usr/gcode/local//ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-04 01:30:42.928] [info] [record_manager.cpp:383] [1945] color map size: 0 +[2026-05-04 01:30:42.928] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:30:42.948] [info] [record_manager.cpp:512] [1945] Parsed file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:30:42.949] [info] [record_manager.cpp:496] [1945] Parsing local file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-04 01:30:42.949] [error] [record_manager.cpp:32] [1945] stat failed /opt/usr/gcode/local//ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-04 01:30:42.950] [info] [record_manager.cpp:383] [1945] color map size: 0 +[2026-05-04 01:30:42.951] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:30:42.970] [info] [record_manager.cpp:512] [1945] Parsed file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:30:42.970] [info] [record_manager.cpp:496] [1945] Parsing local file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-04 01:30:42.971] [error] [record_manager.cpp:32] [1945] stat failed /opt/usr/gcode/local//ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-04 01:30:42.972] [info] [record_manager.cpp:383] [1945] color map size: 0 +[2026-05-04 01:30:42.973] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:30:43.003] [info] [record_manager.cpp:512] [1945] Parsed file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:30:43.003] [info] [record_manager.cpp:496] [1945] Parsing local file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-04 01:30:43.004] [error] [record_manager.cpp:32] [1945] stat failed /opt/usr/gcode/local//ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-04 01:30:43.005] [info] [record_manager.cpp:383] [1945] color map size: 0 +[2026-05-04 01:30:43.005] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:30:43.027] [info] [record_manager.cpp:512] [1945] Parsed file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:30:43.027] [info] [record_manager.cpp:496] [1945] Parsing local file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-04 01:30:43.028] [error] [record_manager.cpp:32] [1945] stat failed /opt/usr/gcode/local//ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-04 01:30:43.029] [info] [record_manager.cpp:383] [1945] color map size: 0 +[2026-05-04 01:30:43.030] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:30:43.049] [info] [record_manager.cpp:512] [1945] Parsed file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:30:43.050] [info] [record_manager.cpp:623] [1945] File ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode already exists in cache, skipping parsing. +[2026-05-04 01:30:43.050] [info] [record_manager.cpp:496] [1945] Parsing local file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-04 01:30:43.064] [error] [record_manager.cpp:32] [1945] stat failed /opt/usr/gcode/local//ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-04 01:30:43.066] [info] [record_manager.cpp:383] [1945] color map size: 0 +[2026-05-04 01:30:43.066] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:30:43.096] [info] [record_manager.cpp:512] [1945] Parsed file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:30:43.097] [info] [record_manager.cpp:623] [1945] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode already exists in cache, skipping parsing. +[2026-05-04 01:30:43.098] [info] [record_manager.cpp:496] [1945] Parsing local file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-04 01:30:43.099] [error] [record_manager.cpp:32] [1945] stat failed /opt/usr/gcode/local//ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-04 01:30:43.100] [info] [record_manager.cpp:383] [1945] color map size: 0 +[2026-05-04 01:30:43.101] [info] [sql_database.cpp:97] [1945] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:30:43.119] [info] [record_manager.cpp:512] [1945] Parsed file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:30:43.121] [info] [record_manager.cpp:636] [1945] Finished parsing local files, total: 11 +[2026-05-04 01:30:43.122] [info] [record_manager.cpp:365] [1945] RecordManager initialized successfully. +[2026-05-04 01:30:43.151] [info] [pins.cpp:112] [1945] create PrinterPins success! +[2026-05-04 01:30:43.181] [info] [msgproto.cpp:606] [1945] create MessageParser success! +[2026-05-04 01:30:43.182] [info] [mcu.cpp:1963] [1945] restart_via_remoterpc +[2026-05-04 01:30:43.183] [error] [serialhdl.cpp:309] [1945] SerialReader::disconnect() +[2026-05-04 01:30:43.184] [info] [dsp_helper.h:31] [1945] remoterpc_ctrl 0 +[2026-05-04 01:30:43.190] [info] [webhooks.cpp:56] [1945] webhooks client 37820940: New connection +[2026-05-04 01:30:43.199] [info] [webhooks.cpp:1232] [1945] handle_query is_subscribe true : {"canvas_dev":["fds","canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[2026-05-04 01:30:43.203] [info] [webhooks.cpp:1232] [1945] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[2026-05-04 01:30:43.205] [info] [device_ui_message_handle.cpp:65] [1945] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[2026-05-04 01:30:43.206] [info] [device_ui_message_handle.cpp:503] [1945] Total tasks: 3 +[2026-05-04 01:30:43.209] [info] [webhooks.cpp:799] [1945] return handle_sync_info: {"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3} +[2026-05-04 01:30:43.212] [info] [webhooks.cpp:170] [1945] return total: {"id":5,"method":"sync_info","result":{"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3}} +[2026-05-04 01:30:43.246] [warning] [webhooks.cpp:148] [1945] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:30:43.248] [info] [webhooks.cpp:170] [1945] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":7} +[2026-05-04 01:30:43.251] [info] [webhooks.cpp:170] [1945] return total: {"id":9,"result":{}} +[2026-05-04 01:30:43.255] [warning] [webhooks.cpp:148] [1945] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:30:43.257] [info] [webhooks.cpp:170] [1945] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":11} +[2026-05-04 01:30:43.259] [info] [device_ui_message_handle.cpp:255] [1945] Handling bind function request {"script":"get_device_info"} +[2026-05-04 01:30:43.261] [info] [webhooks.cpp:768] [1945] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-05-04 01:30:43.263] [info] [webhooks.cpp:170] [1945] return total: {"id":13,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-05-04 01:30:43.265] [info] [device_ui_message_handle.cpp:65] [1945] Handling sync info request {"region_code":1,"script":"set_region"} +[2026-05-04 01:30:43.267] [info] [device_ui_message_handle.cpp:129] [1945] Handling set region request 1 +[2026-05-04 01:30:43.268] [info] [device_ui_message_handle.cpp:132] [1945] Region is the same as current region: 1 +[2026-05-04 01:30:43.269] [info] [webhooks.cpp:799] [1945] return handle_sync_info: {"script":"set_region"} +[2026-05-04 01:30:43.270] [info] [webhooks.cpp:170] [1945] return total: {"id":15,"method":"sync_info","result":{"script":"set_region"}} +[2026-05-04 01:30:43.279] [info] [webhooks.cpp:170] [1945] return total: {"id":3,"result":{"eventtime":23.02026001,"status":null}} +[2026-05-04 01:30:43.284] [warning] [webhooks.cpp:148] [1945] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:30:43.285] [info] [webhooks.cpp:170] [1945] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":6} +[2026-05-04 01:30:43.288] [info] [device_ui_message_handle.cpp:321] [1945] Get Network access cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-04 01:30:43.289] [info] [webhooks.cpp:756] [1945] return handle_get_network_access_cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-04 01:30:43.291] [info] [webhooks.cpp:170] [1945] return total: {"id":10,"method":"get_network_access_cfg","result":{"object":{"lan_status":true,"token":"miM2yt","token_status":true}}} +[2026-05-04 01:30:43.293] [info] [device_ui_message_handle.cpp:65] [1945] Handling sync info request {"script":"get_device_status"} +[2026-05-04 01:30:43.295] [info] [device_ui_message_handle.cpp:143] [1945] Handling get device status request +[2026-05-04 01:30:43.298] [info] [device_ui_message_handle.cpp:154] [1945] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-04 01:30:43.299] [info] [webhooks.cpp:799] [1945] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-04 01:30:43.301] [info] [webhooks.cpp:170] [1945] return total: {"id":14,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[2026-05-04 01:30:43.305] [info] [webhooks.cpp:170] [1945] return total: {"id":4,"result":{"eventtime":23.02026001,"status":null}} +[2026-05-04 01:30:43.719] [warning] [webhooks.cpp:148] [1945] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:30:43.720] [info] [webhooks.cpp:170] [1945] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":8} +[2026-05-04 01:30:43.721] [info] [device_ui_message_handle.cpp:65] [1945] Handling sync info request {"script":"set_status","status":1,"sub_status":0} +[2026-05-04 01:30:43.722] [info] [device_ui_message_handle.cpp:553] [1945] Setting status: 1, sub_status: 0 +[2026-05-04 01:30:43.722] [info] [device_status.cpp:1204] [1945] Set UI ready: true +[2026-05-04 01:30:43.722] [info] [webhooks.cpp:799] [1945] return handle_sync_info: {"script":"set_status"} +[2026-05-04 01:30:43.723] [info] [webhooks.cpp:170] [1945] return total: {"id":16,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-04 01:30:44.189] [info] [dsp_helper.h:31] [1945] remoterpc_ctrl 1 +[2026-05-04 01:30:44.303] [warning] [webhooks.cpp:148] [1945] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:30:44.303] [info] [webhooks.cpp:170] [1945] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":12} +[2026-05-04 01:30:45.305] [info] [msgproto.cpp:606] [1945] create MessageParser success! +[2026-05-04 01:30:45.306] [info] [mcu.cpp:1049] [1945] MCU 'bed_sensor' restart power +[2026-05-04 01:30:45.717] [info] [mcu.cpp:1072] [1945] bootloader mode, try jump to app! +[2026-05-04 01:30:45.745] [info] [msgproto.cpp:606] [1945] create MessageParser success! +[2026-05-04 01:30:45.749] [info] [mcu.cpp:1049] [1945] MCU 'toolhead' restart power +[2026-05-04 01:30:46.160] [info] [mcu.cpp:1072] [1945] bootloader mode, try jump to app! +[2026-05-04 01:30:46.294] [info] [bed_mesh.cpp:1466] [1945] zero_ref_pos size 0 +[2026-05-04 01:30:46.406] [info] [bed_mesh.cpp:2722] [1945] ProfileManager profile->get_name bed_mesh +[2026-05-04 01:30:46.406] [info] [bed_mesh.cpp:2722] [1945] ProfileManager profile->get_name bed_mesh ADAPTIVE +[2026-05-04 01:30:46.406] [info] [bed_mesh.cpp:2722] [1945] ProfileManager profile->get_name bed_mesh default +[2026-05-04 01:30:46.411] [info] [gcode_move.cpp:60] [1945] GCodeMove init! +[2026-05-04 01:30:46.452] [info] [gcode_move.cpp:119] [1945] GCodeMove init success!! +[2026-05-04 01:30:46.452] [info] [gcode_move.cpp:274] [1945] set_move_transform transform: force:false +[2026-05-04 01:30:46.489] [info] [print_stats.cpp:26] [1945] PrintStats init! +[2026-05-04 01:30:46.491] [info] [print_stats.cpp:55] [1945] PrintStats init success!! +[2026-05-04 01:30:46.491] [info] [bed_mesh.cpp:463] [1945] update_status bed_mesh_exist:0x0100 +[2026-05-04 01:30:46.492] [info] [print_stats.cpp:277] [1945] bed_mesh_exist:0x0100 +[2026-05-04 01:30:46.492] [warning] [extras_factory.cpp:323] [1945] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-04 01:30:46.492] [warning] [extras_factory.cpp:323] [1945] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-04 01:30:46.492] [info] [beep_ctrl.cpp:39] [1945] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[2026-05-04 01:30:46.494] [info] [beep_ctrl.cpp:147] [1945] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[2026-05-04 01:30:46.495] [info] [beep_ctrl.cpp:262] [1945] exec_cmd data 0 +[2026-05-04 01:30:46.495] [info] [beep_ctrl.cpp:181] [1945] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[2026-05-04 01:30:46.496] [info] [beep_ctrl.cpp:262] [1945] exec_cmd data 333333 +[2026-05-04 01:30:46.496] [info] [beep_ctrl.cpp:199] [1945] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[2026-05-04 01:30:46.496] [info] [beep_ctrl.cpp:262] [1945] exec_cmd data 166666 +[2026-05-04 01:30:46.497] [info] [beep_ctrl.cpp:217] [1945] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[2026-05-04 01:30:46.497] [info] [beep_ctrl.cpp:262] [1945] exec_cmd data normal +[2026-05-04 01:30:46.530] [info] [query_adc.cpp:36] [1945] QueryADC init success! +[2026-05-04 01:30:46.531] [info] [mmu.cpp:1447] [1945] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[2026-05-04 01:30:46.532] [info] [mmu.cpp:1465] [1945] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[2026-05-04 01:30:46.534] [info] [cavity_fan.cpp:27] [1945] PrinterFanCavity init! +[2026-05-04 01:30:46.535] [info] [cavity_fan.cpp:85] [1945] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[2026-05-04 01:30:46.535] [info] [cavity_fan.cpp:96] [1945] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[2026-05-04 01:30:46.535] [info] [cavity_fan.cpp:104] [1945] temp_drop_det_time 60 5 120 1.5 180 +[2026-05-04 01:30:46.536] [info] [fan.cpp:55] [1945] __func__:Fan #1 str_pin:PD17 +[2026-05-04 01:30:46.537] [info] [cavity_fan.cpp:115] [1945] PrinterFanCavity init success!! +[2026-05-04 01:30:46.538] [info] [stepper_enable.cpp:27] [1945] PrinterStepperEnable init! +[2026-05-04 01:30:46.540] [info] [fan.cpp:55] [1945] __func__:Fan #1 str_pin:PG15 +[2026-05-04 01:30:46.569] [info] [fan.cpp:55] [1945] __func__:Fan #1 str_pin:toolhead:PA8 +[2026-05-04 01:30:46.572] [info] [fan.cpp:55] [1945] __func__:Fan #1 str_pin:PD15 +[2026-05-04 01:30:46.603] [info] [exclude_object.cpp:28] [1945] ExcludeObject init! +[2026-05-04 01:30:46.605] [info] [exclude_object.cpp:79] [1945] ExcludeObject init success! +[2026-05-04 01:30:46.665] [warning] [extras_factory.cpp:323] [1945] create extras: "g180_load_config" failer! +[2026-05-04 01:30:46.667] [info] [heater_bed.cpp:18] [1945] PrinterHeaterBed Init! +[2026-05-04 01:30:46.668] [info] [heaters.cpp:873] [1945] PrinterHeaters init! +[2026-05-04 01:30:46.669] [info] [heaters.cpp:898] [1945] PrinterHeaters init success! +[2026-05-04 01:30:46.683] [info] [heaters.cpp:935] [1945] c->get_name(): thermistor NTC 100K beta 3950 +[2026-05-04 01:30:46.683] [info] [thermistor.cpp:138] [1945] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[2026-05-04 01:30:46.684] [info] [heaters.cpp:935] [1945] c->get_name(): thermistor NTC 100K beta 3950 DSP +[2026-05-04 01:30:46.685] [info] [thermistor.cpp:138] [1945] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[2026-05-04 01:30:46.769] [info] [utilities.cpp:52] [1945] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[2026-05-04 01:30:46.771] [info] [thermistor.cpp:146] [1945] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[2026-05-04 01:30:46.771] [info] [heaters.cpp:935] [1945] c->get_name(): thermistor NTC 100K beta 4300 +[2026-05-04 01:30:46.772] [info] [thermistor.cpp:138] [1945] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[2026-05-04 01:30:46.772] [info] [heaters.cpp:935] [1945] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[2026-05-04 01:30:46.773] [info] [thermistor.cpp:138] [1945] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[2026-05-04 01:30:46.773] [info] [heaters.cpp:935] [1945] c->get_name(): thermistor NTC R25 350 +[2026-05-04 01:30:46.774] [info] [thermistor.cpp:138] [1945] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[2026-05-04 01:30:46.775] [info] [heaters.cpp:943] [1945] PrinterHeaters::load_config success! +[2026-05-04 01:30:46.775] [info] [heaters.cpp:1032] [1945] setup_sensor success! +[2026-05-04 01:30:46.775] [info] [adc_temperature.cpp:29] [1945] __func__:PrinterADCtoTemperature name:heater_bed +[2026-05-04 01:30:46.776] [info] [adc_temperature.cpp:35] [1945] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[2026-05-04 01:30:46.776] [info] [adc_temperature.cpp:165] [1945] name:heater_bed +[2026-05-04 01:30:46.776] [info] [error_mcu.cpp:101] [1945] create PrinterMCUError success! +[2026-05-04 01:30:46.778] [info] [heaters.cpp:83] [1945] Heater init! name: heater_bed +[2026-05-04 01:30:46.778] [info] [heaters.cpp:122] [1945] __func__:Heater,heater_pin:PG13 +[2026-05-04 01:30:46.780] [info] [pid_calibrate.cpp:43] [1945] PIDCalibrate init success!! +[2026-05-04 01:30:46.781] [warning] [heaters.cpp:329] [1945] Heater init success!!!! +[2026-05-04 01:30:46.781] [warning] [heaters.cpp:985] [1945] debug name heater_bed, gcode_id B +[2026-05-04 01:30:46.782] [info] [heater_bed.cpp:41] [1945] PrinterHeaterBed Init success! +[2026-05-04 01:30:46.783] [info] [heater_fan.cpp:24] [1945] PrinterHeaterFan init! +[2026-05-04 01:30:46.783] [info] [fan.cpp:55] [1945] __func__:Fan #1 str_pin:toolhead:PB13 +[2026-05-04 01:30:46.785] [info] [heater_fan.cpp:46] [1945] PrinterHeaterFan init success!! +[2026-05-04 01:30:46.788] [info] [idle_timeout.cpp:28] [1945] init IdleTimeout ... +[2026-05-04 01:30:46.790] [info] [idle_timeout.cpp:72] [1945] init IdleTimeout success !!! +[2026-05-04 01:30:46.931] [info] [bulk_sensor.cpp:312] [1945] unpack_fmt:mqtt_strategy_->is_valid(): true +[2026-05-04 01:30:51.275] [info] [webhooks.cpp:1232] [1945] handle_query is_subscribe true : {"canvas_dev":["fds","canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[2026-05-04 01:30:51.282] [info] [webhooks.cpp:1232] [1945] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[2026-05-04 01:30:51.282] [info] [device_ui_message_handle.cpp:65] [1945] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[2026-05-04 01:30:51.283] [info] [device_ui_message_handle.cpp:503] [1945] Total tasks: 3 +[2026-05-04 01:30:51.284] [info] [webhooks.cpp:799] [1945] return handle_sync_info: {"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3} +[2026-05-04 01:30:51.295] [info] [webhooks.cpp:170] [1945] return total: {"id":19,"method":"sync_info","result":{"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3}} +[2026-05-04 01:30:51.296] [info] [beep_ctrl.cpp:131] [1945] cmd_SET_BEEP_ENABLE beep_enabled false +[2026-05-04 01:30:51.297] [info] [webhooks.cpp:170] [1945] return total: {"id":21,"result":{}} +[2026-05-04 01:30:51.297] [info] [webhooks.cpp:170] [1945] return total: {"id":23,"result":{}} +[2026-05-04 01:30:51.298] [info] [filament_motion_sensor.cpp:146] [1945] CMD_encoder_sensor_switch:true +[2026-05-04 01:30:51.299] [info] [webhooks.cpp:170] [1945] return total: {"id":25,"result":{}} +[2026-05-04 01:30:51.299] [info] [device_ui_message_handle.cpp:255] [1945] Handling bind function request {"script":"get_device_info"} +[2026-05-04 01:30:51.299] [info] [webhooks.cpp:768] [1945] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-05-04 01:30:51.300] [info] [webhooks.cpp:170] [1945] return total: {"id":27,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-05-04 01:30:51.300] [info] [device_ui_message_handle.cpp:65] [1945] Handling sync info request {"region_code":1,"script":"set_region"} +[2026-05-04 01:30:51.300] [info] [device_ui_message_handle.cpp:129] [1945] Handling set region request 1 +[2026-05-04 01:30:51.300] [info] [device_ui_message_handle.cpp:132] [1945] Region is the same as current region: 1 +[2026-05-04 01:30:51.300] [info] [webhooks.cpp:799] [1945] return handle_sync_info: {"script":"set_region"} +[2026-05-04 01:30:51.301] [info] [webhooks.cpp:170] [1945] return total: {"id":29,"method":"sync_info","result":{"script":"set_region"}} +[2026-05-04 01:30:51.302] [info] [filament_switch_sensor.cpp:337] [1945] cmd_SET_FILAMENT_SENSOR:1 +[2026-05-04 01:30:51.302] [info] [webhooks.cpp:170] [1945] return total: {"id":20,"result":{}} +[2026-05-04 01:30:51.303] [info] [device_ui_message_handle.cpp:321] [1945] Get Network access cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-04 01:30:51.303] [info] [webhooks.cpp:756] [1945] return handle_get_network_access_cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-04 01:30:51.303] [info] [webhooks.cpp:170] [1945] return total: {"id":24,"method":"get_network_access_cfg","result":{"object":{"lan_status":true,"token":"miM2yt","token_status":true}}} +[2026-05-04 01:30:51.304] [info] [device_ui_message_handle.cpp:65] [1945] Handling sync info request {"script":"get_device_status"} +[2026-05-04 01:30:51.304] [info] [device_ui_message_handle.cpp:143] [1945] Handling get device status request +[2026-05-04 01:30:51.305] [info] [device_ui_message_handle.cpp:154] [1945] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-04 01:30:51.305] [info] [webhooks.cpp:799] [1945] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-04 01:30:51.305] [info] [webhooks.cpp:170] [1945] return total: {"id":28,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[2026-05-04 01:30:51.340] [info] [output_pin.cpp:189] [1945] cmd_SET_PIN : 189___ +[2026-05-04 01:30:51.340] [info] [output_pin.cpp:200] [1945] cmd_SET_PIN : 200___value:1,scale:1,cfgname:output_pin led_pin +[2026-05-04 01:30:51.340] [info] [mcu.cpp:712] [1945] set_digital pin PB5 7.203480083333333 31.154589473 +[2026-05-04 01:30:51.341] [info] [webhooks.cpp:170] [1945] return total: {"id":22,"result":{}} +[2026-05-04 01:30:51.341] [info] [device_ui_message_handle.cpp:65] [1945] Handling sync info request {"script":"set_status","status":1,"sub_status":0} +[2026-05-04 01:30:51.342] [info] [device_ui_message_handle.cpp:553] [1945] Setting status: 1, sub_status: 0 +[2026-05-04 01:30:51.342] [info] [device_status.cpp:1204] [1945] Set UI ready: true +[2026-05-04 01:30:51.342] [info] [device_status.cpp:1207] [1945] UI is ready, set machine status to IDLE +[2026-05-04 01:30:51.342] [info] [webhooks.cpp:799] [1945] return handle_sync_info: {"script":"set_status"} +[2026-05-04 01:30:51.342] [info] [webhooks.cpp:170] [1945] return total: {"id":30,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-04 01:30:51.380] [info] [webhooks.cpp:170] [1945] return total: {"id":17,"result":{"eventtime":31.156873598,"status":{"canvas_dev":{"canvas_lite":{"channels0":{"cid":0,"filament":{"brand":"0xEEEEEEEE","code":"0x0000","color":"0x000000","date":"2502","detailed_type":"PLA","diameter":"1.75","manufacturer":"Generic","nozzle_max_temp":"230℃","nozzle_min_temp":"190℃","type":"PLA","weight":"1000"},"status":1},"channels1":{"cid":1,"filament":{"brand":"0xEEEEEEEE","code":"0x0000","color":"0xFFFFFF","date":"2502","detailed_type":"PLA","diameter":"1.75","manufacturer":"Generic","nozzle_max_temp":"230℃","nozzle_min_temp":"190℃","type":"PLA","weight":"1000"},"status":1},"channels2":{"cid":2,"filament":{"brand":"","code":"","color":"","date":"","detailed_type":"","diameter":"","manufacturer":"","nozzle_max_temp":"","nozzle_min_temp":"","type":"","weight":""},"status":0},"channels3":{"cid":3,"filament":{"brand":"","code":"","color":"","date":"","detailed_type":"","diameter":"","manufacturer":"","nozzle_max_temp":"","nozzle_min_temp":"","type":"","weight":""},"status":0},"connected":1,"did":0,"extern_channel":{"filament":{"brand":"0xEEEEEEEE","code":"0x0001","color":"0xFFFFFF","date":"","detailed_type":"PLA","diameter":"1.75","manufacturer":"ELEGOO","nozzle_max_temp":"250.0","nozzle_min_temp":"170.0","type":"PLA","weight":"1000"},"status":0}},"fds":{"connected":0,"dragging":0,"fila_in":0}},"cavity_fan":{"rpm":0.0,"speed":0.0},"controller_fan board_cooling_fan":{"rpm":0.0,"speed":0.0},"extruder":{"target":0.0,"temperature":0.0},"fan":{"rpm":0.0,"speed":0.0},"fan_generic fan1":{"rpm":0.0,"speed":0.0},"gcode_move":{"speed":1500.0,"speed_factor":1.0},"heater_bed":{"target":0.0,"temperature":22.56},"heater_fan heatbreak_cooling_fan":{"rpm":0.0,"speed":0.0},"pause_resume":{"is_paused":false},"print_stats":{"auto_plug_in_filament":null,"bed_mesh_detected":256,"beep_enabled":false,"canvas_runout_filament":null,"cavity_temperature_mode":0,"enabled":1,"filament_detected":false,"filename":"","info":{"current_layer":0,"total_layer":null},"machine_status":1,"machine_sub_status":0,"print_duration":0.0,"state":"standby","total_duration":0.0},"toolhead":{"homed_axes":""},"virtual_sdcard":{"progress":0.0},"ztemperature_sensor box":{"measured_max_temp":21.88,"measured_min_temp":21.85,"temperature":21.88}}}} +[2026-05-04 01:30:51.383] [info] [webhooks.cpp:170] [1945] return total: {"id":18,"result":{"eventtime":31.156873598,"status":null}} +[2026-05-04 01:30:51.388] [info] [webhooks.cpp:170] [1945] return total: {"id":26,"result":{}} +[2026-05-04 01:30:51.471] [info] [mmu.cpp:2093] [1945] {"command":"CANVAS_SOFTWARE_VERSION","result":"00.00.00.44"} +[2026-05-04 01:30:51.472] [info] [gcode.cpp:1940] [1957] update_device_status: {"command":"CANVAS_SOFTWARE_VERSION","result":"00.00.00.44"} +[2026-05-04 01:30:51.700] [info] [filament_switch_sensor.cpp:368] [1945] _button_handler switch_fila_det true +[2026-05-04 01:30:51.701] [info] [mmu.cpp:2093] [1945] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-04 01:30:51.701] [info] [filament_switch_sensor.cpp:247] [1945] name:filament_sensor, note_filament_present is_filament_present true filament_present true sensor_enabled 1 canvas_enabled 1 +[2026-05-04 01:30:51.702] [info] [gcode.cpp:1940] [1957] update_device_status: {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-04 01:30:51.708] [warning] [clocksync.cpp:181] [1945] queries_pending 2 +[2026-05-04 01:30:51.735] [info] [heaters.cpp:423] [2009] __func__:temperature_callback,heater_name:extruder,read_time:7.41800986891596,last_temp:24.43035950800345,temp:24.43035950800345,target_temp:0,smoothed_temp:24.43035950800345 +[2026-05-04 01:30:51.884] [info] [mqtt_connector.cpp:498] [2013] Starting heartbeat monitor thread. +[2026-05-04 01:30:51.885] [info] [timer_manager.cpp:72] [2013] Adding timer task: LanMQTTStrategy_heartbeat_monitor, interval: 20000 ms, repeat: true +[2026-05-04 01:30:51.885] [info] [mqtt_connector.cpp:295] [2013] Subscribed to topic: elegoo/F01CFFQQFN55YKS/api_register +[2026-05-04 01:30:52.643] [info] [clocksync.cpp:206] [2003] mcu 'bed_sensor': New minimum RTT: sent_time=32.455910223000004,half_rtt=0.00017485449999909974,freq=119999304.74756041 +[2026-05-04 01:30:52.693] [info] [clocksync.cpp:206] [2001] mcu 'mcu': New minimum RTT: sent_time=32.506751723,half_rtt=0.0001010625000006371,freq=23999998.16382218 +[2026-05-04 01:30:52.698] [info] [clocksync.cpp:206] [2009] mcu 'toolhead': New minimum RTT: sent_time=32.510290973,half_rtt=0.00026385450000177,freq=119998224.54079562 +[2026-05-04 01:30:53.682] [info] [clocksync.cpp:206] [2009] mcu 'toolhead': New minimum RTT: sent_time=33.494450889999996,half_rtt=0.00026231250000208206,freq=119998392.52706617 +[2026-05-04 01:31:16.989] [info] [por.cpp:57] [1945] POR CHARGE DONE! +[2026-05-04 01:31:39.986] [info] [clocksync.cpp:219] [2001] mcu 'mcu': Ignoring clock sample: sent_time=79.784265079,time_avg=55.0752305417544,freq=24000293.662872557,diff=237542.88451242447(0.009897620188017686),stddev=10503.984604324245 +[2026-05-04 01:31:43.210] [info] [filament_motion_sensor.cpp:146] [1945] CMD_encoder_sensor_switch:true +[2026-05-04 01:31:43.211] [info] [webhooks.cpp:170] [1945] return total: {"id":31,"result":{}} +[2026-05-04 01:31:52.409] [info] [device_status.cpp:1674] [1945] Device status change to: 10, last status: 1 +[2026-05-04 01:31:52.415] [info] [homing_override.cpp:238] [1945] need false false false homed false false false +[2026-05-04 01:31:52.418] [info] [gcode.cpp:1940] [1957] update_device_status: {"command":"M2202","result":"2801"} +[2026-05-04 01:31:52.418] [info] [device_status.cpp:989] [1957] M2202 result_code:2801 +[2026-05-04 01:31:52.420] [info] [homing_override.cpp:261] [1945] cmd_G28 cur_temp:24.579585245434153,safe_home_temp:140 +[2026-05-04 01:31:52.424] [info] [extruder.cpp:493] [1945] cmd_M104 temp 140 index -1 wait true +[2026-05-04 01:31:52.427] [info] [verify_heater.cpp:67] [1945] verify_heater:reset_fault heater_name extruder +[2026-05-04 01:31:52.439] [info] [verify_heater.cpp:67] [1945] verify_heater:reset_fault heater_name extruder +[2026-05-04 01:31:52.440] [info] [heaters.cpp:319] [1945] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-04 01:31:52.441] [info] [heaters.cpp:1104] [1945] __func__:set_temperature,temp:140,wait:true +[2026-05-04 01:31:52.442] [info] [toolhead.cpp:904] [1945] get_last_move_time +[2026-05-04 01:31:52.462] [info] [gcode.cpp:1940] [1957] update_device_status: {"command":"M2202","result":"1045"} +[2026-05-04 01:31:52.462] [info] [device_status.cpp:989] [1957] M2202 result_code:1045 +[2026-05-04 01:31:53.371] [info] [verify_heater.cpp:164] [1945] Heater extruder approaching new target of 140 +[2026-05-04 01:32:15.388] [info] [verify_heater.cpp:140] [1945] Heater extruder within range of 140 +[2026-05-04 01:32:20.481] [info] [gcode.cpp:1940] [1957] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-04 01:32:20.481] [info] [heaters.cpp:1236] [1945] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-04 01:32:20.492] [info] [device_status.cpp:989] [1957] M2202 result_code:1066 +[2026-05-04 01:32:20.493] [info] [homing_override.cpp:166] [1945] homing_ready axis z +[2026-05-04 01:32:20.752] [info] [homing_override.cpp:175] [1945] homing_ready #2: endstop name z state false +[2026-05-04 01:32:21.107] [info] [gcode.cpp:598] [1945] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-04 01:32:21.933] [info] [gcode.cpp:598] [1945] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-04 01:32:21.938] [info] [gcode_move.cpp:638] [1945] cmd_M114 X:5.000 Y:5.000 Z:-0.119 E:0.000 +[2026-05-04 01:32:21.941] [info] [stepper.cpp:573] [1945] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 01:32:22.056] [info] [homing.cpp:152] [1945] kin_spos name stepper_x command_position 390.75 +[2026-05-04 01:32:22.057] [info] [homing.cpp:152] [1945] kin_spos name stepper_y command_position 380.75 +[2026-05-04 01:32:22.059] [info] [homing.cpp:152] [1945] kin_spos name stepper_z command_position 0 +[2026-05-04 01:32:22.179] [info] [mcu.cpp:712] [1945] set_digital pin PF6 98.01872916666666 121.992535224 +[2026-05-04 01:32:22.184] [info] [mcu.cpp:712] [1945] set_digital pin PE15 98.01872916666666 121.997115349 +[2026-05-04 01:32:22.436] [info] [mcu.cpp:390] [2001] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 01:32:22.645] [info] [mcu.cpp:634] [1945] home_wait pin_value:1 next_clock:2354502919 +[2026-05-04 01:32:22.649] [info] [homing.cpp:266] [1945] endstop_name x tt 98.104080625 trigger_time 98.104080625 move_end_print_time 98.38180158333333 +[2026-05-04 01:32:22.653] [info] [homing.cpp:266] [1945] endstop_name x tt 98.104080625 trigger_time 98.104080625 move_end_print_time 98.38180158333333 +[2026-05-04 01:32:22.657] [info] [homing.cpp:309] [1945] stepper_name stepper_x over_steps 0 halt_pos -339 start_pos 0 trig_pos -339 +[2026-05-04 01:32:22.659] [info] [homing.cpp:309] [1945] stepper_name stepper_y over_steps 0 halt_pos -339 start_pos 0 trig_pos -339 +[2026-05-04 01:32:22.946] [info] [stepper.cpp:573] [1945] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 01:32:23.129] [error] [tmc.cpp:359] [1945] TMC stepper_x reports GSTAT: 10000000 reset=1(Reset) +[2026-05-04 01:32:23.153] [error] [tmc.cpp:359] [1945] TMC stepper_y reports GSTAT: 10000000 reset=1(Reset) +[2026-05-04 01:32:23.358] [info] [gcode_move.cpp:638] [1945] cmd_M114 X:8.000 Y:5.000 Z:-0.124 E:0.000 +[2026-05-04 01:32:23.361] [info] [gcode_move.cpp:638] [1945] cmd_M114 X:8.000 Y:5.000 Z:-0.124 E:0.000 +[2026-05-04 01:32:23.364] [info] [stepper.cpp:573] [1945] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 01:32:23.460] [info] [homing.cpp:152] [1945] kin_spos name stepper_x command_position 414 +[2026-05-04 01:32:23.461] [info] [homing.cpp:152] [1945] kin_spos name stepper_y command_position -398 +[2026-05-04 01:32:23.462] [info] [homing.cpp:152] [1945] kin_spos name stepper_z command_position 0 +[2026-05-04 01:32:25.321] [info] [clocksync.cpp:206] [2001] mcu 'mcu': New minimum RTT: sent_time=125.135721267,half_rtt=6.400000000184036e-05,freq=24000167.11441875 +[2026-05-04 01:32:26.336] [info] [clocksync.cpp:206] [2009] mcu 'toolhead': New minimum RTT: sent_time=126.15019826800001,half_rtt=0.0002589164999946547,freq=119999367.35727505 +[2026-05-04 01:32:27.213] [info] [clocksync.cpp:206] [2003] mcu 'bed_sensor': New minimum RTT: sent_time=127.027381393,half_rtt=0.0001717295000034369,freq=119999267.20536464 +[2026-05-04 01:32:28.167] [info] [mcu.cpp:390] [2001] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 01:32:28.189] [info] [mcu.cpp:634] [1945] home_wait pin_value:1 next_clock:2492457152 +[2026-05-04 01:32:28.190] [info] [homing.cpp:266] [1945] endstop_name y tt 103.85217366666667 trigger_time 103.85217366666667 move_end_print_time 104.10511879166667 +[2026-05-04 01:32:28.190] [info] [homing.cpp:266] [1945] endstop_name y tt 103.85217366666667 trigger_time 103.85217366666667 move_end_print_time 104.10511879166667 +[2026-05-04 01:32:28.190] [info] [homing.cpp:309] [1945] stepper_name stepper_y over_steps 0 halt_pos 21713 start_pos 464 trig_pos 21713 +[2026-05-04 01:32:28.190] [info] [homing.cpp:309] [1945] stepper_name stepper_x over_steps 0 halt_pos -20785 start_pos 464 trig_pos -20785 +[2026-05-04 01:32:28.220] [info] [stepper.cpp:573] [1945] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 01:32:28.827] [info] [gcode_move.cpp:638] [1945] cmd_M114 X:8.000 Y:8.000 Z:-0.123 E:0.000 +[2026-05-04 01:32:28.829] [info] [gcode_move.cpp:638] [1945] cmd_M114 X:8.000 Y:8.000 Z:-0.123 E:0.000 +[2026-05-04 01:32:28.831] [info] [stepper.cpp:573] [1945] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 01:32:28.863] [info] [homing.cpp:152] [1945] kin_spos name stepper_x command_position 393.75 +[2026-05-04 01:32:28.863] [info] [homing.cpp:152] [1945] kin_spos name stepper_y command_position 377.75 +[2026-05-04 01:32:28.864] [info] [homing.cpp:152] [1945] kin_spos name stepper_z command_position 0 +[2026-05-04 01:32:29.181] [info] [clocksync.cpp:206] [2003] mcu 'bed_sensor': New minimum RTT: sent_time=128.99640472800002,half_rtt=0.00016847899998140292,freq=119999003.51936111 +[2026-05-04 01:32:30.153] [info] [mcu.cpp:390] [2001] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 01:32:30.172] [info] [mcu.cpp:634] [1945] home_wait pin_value:1 next_clock:2540126301 +[2026-05-04 01:32:30.173] [info] [homing.cpp:266] [1945] endstop_name x tt 105.83838820833333 trigger_time 105.83838820833333 move_end_print_time 106.09093229166666 +[2026-05-04 01:32:30.173] [info] [homing.cpp:266] [1945] endstop_name x tt 105.83838820833333 trigger_time 105.83838820833333 move_end_print_time 106.09093229166666 +[2026-05-04 01:32:30.173] [info] [homing.cpp:309] [1945] stepper_name stepper_x over_steps 0 halt_pos -24803 start_pos -19982 trig_pos -24803 +[2026-05-04 01:32:30.173] [info] [homing.cpp:309] [1945] stepper_name stepper_y over_steps 0 halt_pos 16089 start_pos 20910 trig_pos 16089 +[2026-05-04 01:32:30.204] [info] [stepper.cpp:573] [1945] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 01:32:30.273] [info] [clocksync.cpp:206] [2009] mcu 'toolhead': New minimum RTT: sent_time=130.088415186,half_rtt=0.00025797950000594483,freq=119998819.08671147 +[2026-05-04 01:32:30.811] [info] [gcode_move.cpp:638] [1945] cmd_M114 X:8.000 Y:8.000 Z:-0.123 E:0.000 +[2026-05-04 01:32:30.812] [info] [gcode_move.cpp:638] [1945] cmd_M114 X:8.000 Y:8.000 Z:-0.123 E:0.000 +[2026-05-04 01:32:30.813] [info] [stepper.cpp:573] [1945] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 01:32:30.843] [info] [homing.cpp:152] [1945] kin_spos name stepper_x command_position 414 +[2026-05-04 01:32:30.843] [info] [homing.cpp:152] [1945] kin_spos name stepper_y command_position -398 +[2026-05-04 01:32:30.843] [info] [homing.cpp:152] [1945] kin_spos name stepper_z command_position 0 +[2026-05-04 01:32:31.296] [info] [mcu.cpp:390] [2001] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 01:32:31.315] [info] [mcu.cpp:634] [1945] home_wait pin_value:1 next_clock:2567566325 +[2026-05-04 01:32:31.316] [info] [homing.cpp:266] [1945] endstop_name y tt 106.98172254166667 trigger_time 106.98172254166667 move_end_print_time 107.24269274999997 +[2026-05-04 01:32:31.316] [info] [homing.cpp:266] [1945] endstop_name y tt 106.98172254166667 trigger_time 106.98172254166667 move_end_print_time 107.24269274999997 +[2026-05-04 01:32:31.316] [info] [homing.cpp:309] [1945] stepper_name stepper_y over_steps 0 halt_pos 17682 start_pos 16892 trig_pos 17682 +[2026-05-04 01:32:31.316] [info] [homing.cpp:309] [1945] stepper_name stepper_x over_steps 0 halt_pos -24790 start_pos -24000 trig_pos -24790 +[2026-05-04 01:32:31.346] [info] [stepper.cpp:573] [1945] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 01:32:31.346] [info] [gcode_move.cpp:638] [1945] cmd_M114 X:8.000 Y:8.000 Z:-0.123 E:0.000 +[2026-05-04 01:32:31.927] [info] [gcode.cpp:598] [1945] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-04 01:32:32.133] [info] [clocksync.cpp:206] [2003] mcu 'bed_sensor': New minimum RTT: sent_time=131.95036739600002,half_rtt=0.000165728999988346,freq=119998678.27758244 +[2026-05-04 01:32:32.217] [info] [gcode.cpp:598] [1945] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-04 01:32:32.218] [info] [homing_override.cpp:399] [1945] manual_move z start +[2026-05-04 01:32:32.219] [info] [homing_override.cpp:401] [1945] manual_move z over +[2026-05-04 01:32:32.219] [info] [homing_override.cpp:422] [1945] prev_G28 z start +[2026-05-04 01:32:32.250] [info] [homing.cpp:152] [1945] kin_spos name stepper_x command_position 316.5 +[2026-05-04 01:32:32.250] [info] [homing.cpp:152] [1945] kin_spos name stepper_y command_position -211.5 +[2026-05-04 01:32:32.251] [info] [homing.cpp:152] [1945] kin_spos name stepper_z command_position 383.714709 +[2026-05-04 01:32:33.238] [info] [clocksync.cpp:206] [2009] mcu 'toolhead': New minimum RTT: sent_time=133.055399729,half_rtt=0.00024747950000403307,freq=119998504.3085498 +[2026-05-04 01:32:33.559] [info] [mcu.cpp:712] [1945] set_digital pin PE12 109.4165235614586 133.377614521 +[2026-05-04 01:32:33.666] [error] [tmc.cpp:359] [1945] TMC stepper_z reports GSTAT: 10000000 reset=1(Reset) +[2026-05-04 01:32:41.115] [info] [mcu.cpp:390] [2001] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 01:32:41.127] [info] [mcu.cpp:634] [1945] home_wait pin_value:1 next_clock:2803320565 +[2026-05-04 01:32:41.128] [info] [homing.cpp:266] [1945] endstop_name z tt 116.80477354166666 trigger_time 116.80477354166666 move_end_print_time 117.05689291666667 +[2026-05-04 01:32:41.128] [info] [homing.cpp:309] [1945] stepper_name stepper_z over_steps 0 halt_pos -29453 start_pos 0 trig_pos -29453 +[2026-05-04 01:32:41.130] [info] [homing.cpp:152] [1945] kin_spos name stepper_x command_position 316.5 +[2026-05-04 01:32:41.130] [info] [homing.cpp:152] [1945] kin_spos name stepper_y command_position -211.5 +[2026-05-04 01:32:41.130] [info] [homing.cpp:152] [1945] kin_spos name stepper_z command_position 10.570582 +[2026-05-04 01:32:42.109] [info] [mcu.cpp:390] [2001] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 01:32:42.121] [info] [mcu.cpp:634] [1945] home_wait pin_value:1 next_clock:2827197430 +[2026-05-04 01:32:42.122] [info] [homing.cpp:266] [1945] endstop_name z tt 117.79939291666666 trigger_time 117.79939291666666 move_end_print_time 118.05117308333334 +[2026-05-04 01:32:42.122] [info] [homing.cpp:309] [1945] stepper_name stepper_z over_steps 0 halt_pos -29451 start_pos -28653 trig_pos -29451 +[2026-05-04 01:32:42.123] [info] [z_compensation.cpp:264] [1945] ZCompensation handle_home_rails_end +[2026-05-04 01:32:42.124] [info] [z_compensation.cpp:92] [1945] use_fix_ref_temperature true fix_ref_temperature 140 ref_temperature 140.59995209032968 +[2026-05-04 01:32:42.124] [info] [homing_override.cpp:424] [1945] prev_G28 z over +[2026-05-04 01:32:42.124] [info] [homing_override.cpp:426] [1945] manual_move z start +[2026-05-04 01:32:42.125] [info] [homing_override.cpp:438] [1945] manual_move z over +[2026-05-04 01:32:42.125] [info] [gcode.cpp:1940] [1957] update_device_status: {"command":"M2202","result":"2802"} +[2026-05-04 01:32:42.125] [info] [device_status.cpp:989] [1957] M2202 result_code:2802 +[2026-05-04 01:32:42.126] [info] [device_status.cpp:1674] [1957] Device status change to: 1, last status: 10 +[2026-05-04 01:32:42.129] [info] [webhooks.cpp:170] [1945] return total: {"id":32,"result":{}} +[2026-05-04 01:32:42.131] [info] [extruder.cpp:493] [1945] cmd_M104 temp 0 index -1 wait false +[2026-05-04 01:32:42.131] [info] [heaters.cpp:1104] [1945] __func__:set_temperature,temp:0,wait:false +[2026-05-04 01:32:42.132] [info] [webhooks.cpp:170] [1945] return total: {"id":33,"result":{}} +[2026-05-04 01:32:44.587] [info] [heaters.cpp:423] [2001] __func__:temperature_callback,heater_name:heater_bed,read_time:120.27800000037998,last_temp:22.614693119923515,temp:22.614693119923515,target_temp:0,smoothed_temp:22.60469692620837 +[2026-05-04 01:32:51.727] [info] [heaters.cpp:423] [2009] __func__:temperature_callback,heater_name:extruder,read_time:127.41934741288887,last_temp:135.32810901263605,temp:135.32810901263605,target_temp:0,smoothed_temp:135.69722981623124 +[2026-05-04 01:33:35.291] [error] [tmc_uart.cpp:295] [1945] _decode_read error #0 +[2026-05-04 01:34:22.409] [info] [clocksync.cpp:206] [2003] mcu 'bed_sensor': New minimum RTT: sent_time=242.227781157,half_rtt=0.00016531249998763542,freq=119998576.56722203 +[2026-05-04 01:34:44.590] [info] [heaters.cpp:423] [2001] __func__:temperature_callback,heater_name:heater_bed,read_time:240.27800000038,last_temp:22.724473401174123,temp:22.724473401174123,target_temp:0,smoothed_temp:22.711594753976932 +[2026-05-04 01:34:46.039] [info] [clocksync.cpp:206] [2003] mcu 'bed_sensor': New minimum RTT: sent_time=265.857362084,half_rtt=0.00016333350001218605,freq=119998672.19105798 +[2026-05-04 01:34:50.961] [info] [clocksync.cpp:206] [2003] mcu 'bed_sensor': New minimum RTT: sent_time=270.778782295,half_rtt=0.00016124999999078682,freq=119998683.9503703 +[2026-05-04 01:34:51.733] [info] [heaters.cpp:423] [2009] __func__:temperature_callback,heater_name:extruder,read_time:247.420758588106,last_temp:84.21829303186854,temp:84.21829303186854,target_temp:0,smoothed_temp:84.39162218637797 +[2026-05-04 01:35:35.369] [error] [tmc_uart.cpp:319] [1945] _decode_read error #1 +[2026-05-04 01:36:45.090] [info] [heaters.cpp:423] [2001] __func__:temperature_callback,heater_name:heater_bed,read_time:360.77800000037996,last_temp:22.776645836548767,temp:22.776645836548767,target_temp:0,smoothed_temp:22.784581958903274 +[2026-05-04 01:36:51.735] [info] [heaters.cpp:423] [2009] __func__:temperature_callback,heater_name:extruder,read_time:367.422153842654,last_temp:58.72564408805033,temp:58.72564408805033,target_temp:0,smoothed_temp:58.84305276254134 +[2026-05-04 01:37:43.249] [info] [extruder.cpp:493] [1945] cmd_M104 temp 0 index -1 wait false +[2026-05-04 01:37:43.249] [info] [heaters.cpp:1104] [1945] __func__:set_temperature,temp:0,wait:false +[2026-05-04 01:37:43.249] [info] [toolhead.cpp:904] [1945] get_last_move_time +[2026-05-04 01:38:45.590] [info] [heaters.cpp:423] [2001] __func__:temperature_callback,heater_name:heater_bed,read_time:481.27800000037996,last_temp:22.854779602251767,temp:22.854779602251767,target_temp:0,smoothed_temp:22.840182391029828 +[2026-05-04 01:38:51.736] [info] [heaters.cpp:423] [2009] __func__:temperature_callback,heater_name:extruder,read_time:487.42356122559596,last_temp:45.75727474576183,temp:45.75727474576183,target_temp:0,smoothed_temp:45.88130264336312 +[2026-05-04 01:39:15.033] [error] [tmc_uart.cpp:295] [1945] _decode_read error #0 +[2026-05-04 01:40:42.448] [info] [clocksync.cpp:206] [2003] mcu 'bed_sensor': New minimum RTT: sent_time=622.266249546,half_rtt=0.00016187499994657628,freq=119998797.2940801 +[2026-05-04 01:40:46.090] [info] [heaters.cpp:423] [2001] __func__:temperature_callback,heater_name:heater_bed,read_time:601.77800000038,last_temp:22.854779602251767,temp:22.854779602251767,target_temp:0,smoothed_temp:22.836542924427384 +[2026-05-04 01:40:51.738] [info] [heaters.cpp:423] [2009] __func__:temperature_callback,heater_name:extruder,read_time:607.4249949962689,last_temp:40.616148345156375,temp:40.616148345156375,target_temp:0,smoothed_temp:40.64182483031553 +[2026-05-04 01:40:55.248] [info] [clocksync.cpp:206] [2003] mcu 'bed_sensor': New minimum RTT: sent_time=635.065908719,half_rtt=0.00015847899999243964,freq=119998781.40677792 +[2026-05-04 01:42:33.820] [info] [clocksync.cpp:206] [2009] mcu 'toolhead': New minimum RTT: sent_time=733.637592099,half_rtt=0.00024833349999653365,freq=119998562.89177674 +[2026-05-04 01:42:46.590] [info] [heaters.cpp:423] [2001] __func__:temperature_callback,heater_name:heater_bed,read_time:722.27800000038,last_temp:22.81833578249183,temp:22.81833578249183,target_temp:0,smoothed_temp:22.824231088498017 +[2026-05-04 01:42:51.739] [info] [heaters.cpp:423] [2009] __func__:temperature_callback,heater_name:extruder,read_time:727.4264347730167,last_temp:37.42943580806548,temp:37.42943580806548,target_temp:0,smoothed_temp:37.46834002501754 +[2026-05-04 01:43:05.324] [info] [clocksync.cpp:206] [2009] mcu 'toolhead': New minimum RTT: sent_time=765.142119364,half_rtt=0.0002466044999778205,freq=119998562.05352029 +[2026-05-04 01:44:47.089] [info] [heaters.cpp:423] [2001] __func__:temperature_callback,heater_name:heater_bed,read_time:842.77800000038,last_temp:22.839164802480752,temp:22.839164802480752,target_temp:0,smoothed_temp:22.861535051418983 +[2026-05-04 01:44:51.739] [info] [heaters.cpp:423] [2009] __func__:temperature_callback,heater_name:extruder,read_time:847.4278742244807,last_temp:34.669929961146806,temp:34.669929961146806,target_temp:0,smoothed_temp:34.66202679520825 +[2026-05-04 01:45:11.287] [warning] [por.cpp:211] [1945] trig_shutdonw! +[2026-05-04 01:45:11.288] [info] [virtual_sdcard.cpp:335] [1945] start saving supplement info. +[2026-05-04 01:45:11.289] [info] [serialhdl.cpp:502] [2001] mcu 'mcu': got handle_output name: #output message: command_shutdown_pins_set: shutdown shutdown_pins +[2026-05-04 01:45:11.290] [info] [serialhdl.cpp:502] [2001] mcu 'mcu': got handle_output name: #output message: analog_in_shutdown oid 27 ev1 0 ev2 0 st 9 sc 8 +[2026-05-04 01:45:11.291] [info] [serialhdl.cpp:502] [2001] mcu 'mcu': got handle_output name: #output message: analog_in_shutdown oid 34 ev1 0 ev2 0 st 9 sc 8 +[2026-05-04 01:45:11.291] [warning] [serialhdl.cpp:553] [2001] response->len:12,params['clock']:3627588709,params['static_string_id']:19 mcu mcu 'mcu': shutdown! +[2026-05-04 01:45:11.293] [error] [mcu.cpp:1488] [2001] mcu mcu clock32 3627588709 clock64 20807457893 shutdown id 19 msg shutdown_pins +[2026-05-04 01:45:11.294] [info] [config_manager.cpp:350] [1945] save supplement info success +[2026-05-04 01:45:11.296] [info] [config_manager.cpp:486] [1945] save persistent supplement info success +[2026-05-04 01:45:11.296] [info] [virtual_sdcard.cpp:338] [1945] start saving print process data. +[2026-05-04 01:45:11.297] [info] [virtual_sdcard.cpp:376] [1945] handle_power_outage No data needs to be saved before the actual printing. +[2026-05-04 01:45:11.298] [warning] [por.cpp:225] [1945] por:power_off handle done +[2026-05-04 01:49:04.336] [info] [logger.cpp:80] [1931] elegoo log init finish! +[2026-05-04 01:49:04.500] [info] [main.cpp:209] [1931] inputtty:./config/printer,gcode_fd:4 +[2026-05-04 01:49:04.622] [info] [main.cpp:226] [1931] Starting Elegoo... +[2026-05-04 01:49:04.622] [info] [main.cpp:228] [1931] start_args.size:17,sizeof(long_options):9 +[2026-05-04 01:49:04.622] [info] [main.cpp:231] [1931] start_args[img_version]:00.00.00.00 +[2026-05-04 01:49:04.622] [info] [main.cpp:231] [1931] start_args[gui_version]:01.01.11.03 +[2026-05-04 01:49:04.622] [info] [main.cpp:231] [1931] start_args[elegoo_version]:03.26.17.07 +[2026-05-04 01:49:04.622] [info] [main.cpp:231] [1931] start_args[camera_version]:00.00.00.00 +[2026-05-04 01:49:04.622] [info] [main.cpp:231] [1931] start_args[canvas_version]:00.00.00.00 +[2026-05-04 01:49:04.622] [info] [main.cpp:231] [1931] start_args[ota_version]:01.03.02.36 +[2026-05-04 01:49:04.622] [info] [main.cpp:231] [1931] start_args[bed_sensor_version]:00.00.00.00 +[2026-05-04 01:49:04.622] [info] [main.cpp:231] [1931] start_args[start_reason]:startup +[2026-05-04 01:49:04.622] [info] [main.cpp:231] [1931] start_args[apiserver]:/tmp/elegoo_uds +[2026-05-04 01:49:04.622] [info] [main.cpp:231] [1931] start_args[toolhead_gd32_version]:00.00.00.00 +[2026-05-04 01:49:04.622] [info] [main.cpp:231] [1931] start_args[autosave_file]:/opt/usr/cfg/autosave.cfg +[2026-05-04 01:49:04.622] [info] [main.cpp:231] [1931] start_args[gcode_fd]:4 +[2026-05-04 01:49:04.622] [info] [main.cpp:231] [1931] start_args[config_file]:/opt/inst/printer_dsp.cfg +[2026-05-04 01:49:04.622] [info] [main.cpp:231] [1931] start_args[cpu_info]:2 core ARMv7 Processor rev 5 (v7l) +[2026-05-04 01:49:04.622] [info] [main.cpp:231] [1931] start_args[mcu_gd32_version]:00.00.00.00 +[2026-05-04 01:49:04.622] [info] [main.cpp:231] [1931] start_args[machine_model]:Centauri Carbon 2 +[2026-05-04 01:49:04.623] [info] [main.cpp:231] [1931] start_args[os_version]:01.02.12.01 +[2026-05-04 01:49:04.623] [info] [main.cpp:236] [1931] long_options[debuginput]:i +[2026-05-04 01:49:04.623] [info] [main.cpp:236] [1931] long_options[input-tty]:I +[2026-05-04 01:49:04.623] [info] [main.cpp:236] [1931] long_options[api-server]:a +[2026-05-04 01:49:04.623] [info] [main.cpp:236] [1931] long_options[logfile]:l +[2026-05-04 01:49:04.623] [info] [main.cpp:236] [1931] long_options[verbose]:v +[2026-05-04 01:49:04.623] [info] [main.cpp:236] [1931] long_options[debugoutput]:o +[2026-05-04 01:49:04.623] [info] [main.cpp:236] [1931] long_options[dictionary]:d +[2026-05-04 01:49:04.623] [info] [main.cpp:236] [1931] long_options[import-test]:t +[2026-05-04 01:49:04.623] [info] [printer.cpp:50] [1931] create Printer success! +[2026-05-04 01:49:04.624] [info] [printer.cpp:366] [1931] connect begin! +[2026-05-04 01:49:04.624] [info] [printer.cpp:284] [1931] read_config begin! +[2026-05-04 01:49:04.650] [info] [gcode.cpp:1927] [1942] create DeviceStatusWorker success!! +[2026-05-04 01:49:04.718] [info] [webhooks.cpp:607] [1931] create WebHooks success! +[2026-05-04 01:49:04.718] [info] [webhooks.cpp:384] [1931] create ServerSocket success! /tmp/elegoo_uds +[2026-05-04 01:49:04.719] [info] [webhooks.cpp:443] [1931] create ServerSocket success! +[2026-05-04 01:49:04.719] [info] [webhooks.cpp:1317] [1944] create DeviceExceptWorker success!! +[2026-05-04 01:49:05.015] [info] [config_manager.cpp:171] [1931] begin read sn info +[2026-05-04 01:49:05.015] [info] [config_manager.cpp:205] [1931] read product auth success, sn: F01CFFQQFN55YKS +[2026-05-04 01:49:05.017] [info] [config_manager.cpp:148] [1931] machine: {"machine":{"model":"Centauri Carbon 2"},"versions":[{"os_version":"01.02.12.01"},{"mcu_gd32_version":"00.00.00.00"},{"toolhead_gd32_version":"00.00.00.00"},{"bed_sensor_version":"00.00.00.00"},{"canvas_version":"00.00.00.00"},{"camera_version":"00.00.00.00"},{"elegoo_version":"03.26.17.07"},{"gui_version":"01.01.11.03"},{"ota_version":"01.03.02.36"},{"img_version":"00.00.00.00"}]} +[2026-05-04 01:49:05.017] [info] [config_manager.cpp:209] [1931] begin read supplement info +[2026-05-04 01:49:05.019] [info] [config_manager.cpp:306] [1931] token info: token: miM2yt, token_switch_enabled: true, is_lan_mode: true, power_outage_resume_enabled: true, region: 1 +[2026-05-04 01:49:05.022] [info] [config_manager.cpp:453] [1931] load persistent supplement info success +[2026-05-04 01:49:05.023] [info] [device_status.cpp:133] [1931] Create component manager for Centauri Carbon 2 +[2026-05-04 01:49:05.244] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_details WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_details GROUP BY filename HAVING MAX(create_time)); +[2026-05-04 01:49:05.247] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_thumbnail WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_thumbnail GROUP BY filename); +[2026-05-04 01:49:05.249] [info] [record_manager.cpp:302] [1931] Loaded 3 tasks from the database. +[2026-05-04 01:49:05.250] [info] [record_manager.cpp:307] [1931] end task info id a065d20a-a124-4f32-afca-a3dfb699ae8c name ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode status 2. +[2026-05-04 01:49:05.251] [info] [record_manager.cpp:318] [1931] Loaded 11 files from the database. +[2026-05-04 01:49:05.251] [info] [record_manager.cpp:323] [1931] Loaded 3 thumbnails from the database. +[2026-05-04 01:49:05.252] [info] [record_manager.cpp:328] [1931] Loaded 0 delete file records from the database. +[2026-05-04 01:49:05.252] [info] [sql_database.cpp:417] [1931] Loaded exception message: id 6, code 803 +[2026-05-04 01:49:05.252] [info] [sql_database.cpp:417] [1931] Loaded exception message: id 5, code 802 +[2026-05-04 01:49:05.252] [info] [sql_database.cpp:417] [1931] Loaded exception message: id 4, code 1263 +[2026-05-04 01:49:05.252] [info] [sql_database.cpp:417] [1931] Loaded exception message: id 3, code 1263 +[2026-05-04 01:49:05.253] [info] [sql_database.cpp:417] [1931] Loaded exception message: id 2, code 801 +[2026-05-04 01:49:05.253] [info] [sql_database.cpp:417] [1931] Loaded exception message: id 1, code 801 +[2026-05-04 01:49:05.253] [info] [record_manager.cpp:333] [1931] Loaded 6 exception messages from the database. +[2026-05-04 01:49:05.253] [info] [record_manager.cpp:827] [1931] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-04 01:49:05.253] [info] [record_manager.cpp:827] [1931] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-04 01:49:05.254] [info] [record_manager.cpp:827] [1931] File exists: /opt/usr/gcode/local/IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-04 01:49:05.256] [info] [record_manager.cpp:831] [1931] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-04 01:49:05.256] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:49:05.269] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:49:05.270] [info] [record_manager.cpp:344] [1931] check_db_files file[ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode] not exist system, clear it from database +[2026-05-04 01:49:05.271] [info] [record_manager.cpp:831] [1931] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-04 01:49:05.271] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:49:05.284] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:49:05.285] [info] [record_manager.cpp:344] [1931] check_db_files file[ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode] not exist system, clear it from database +[2026-05-04 01:49:05.286] [info] [record_manager.cpp:831] [1931] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-04 01:49:05.286] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:49:05.297] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:49:05.298] [info] [record_manager.cpp:344] [1931] check_db_files file[ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode] not exist system, clear it from database +[2026-05-04 01:49:05.299] [info] [record_manager.cpp:831] [1931] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-04 01:49:05.299] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:49:05.310] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:49:05.311] [info] [record_manager.cpp:344] [1931] check_db_files file[ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode] not exist system, clear it from database +[2026-05-04 01:49:05.312] [info] [record_manager.cpp:831] [1931] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-04 01:49:05.312] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:49:05.325] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:49:05.326] [info] [record_manager.cpp:344] [1931] check_db_files file[ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode] not exist system, clear it from database +[2026-05-04 01:49:05.326] [info] [record_manager.cpp:831] [1931] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-04 01:49:05.327] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:49:05.338] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:49:05.339] [info] [record_manager.cpp:344] [1931] check_db_files file[ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode] not exist system, clear it from database +[2026-05-04 01:49:05.340] [info] [record_manager.cpp:831] [1931] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-04 01:49:05.340] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:49:05.351] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:49:05.352] [info] [record_manager.cpp:344] [1931] check_db_files file[ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode] not exist system, clear it from database +[2026-05-04 01:49:05.353] [info] [record_manager.cpp:831] [1931] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-04 01:49:05.353] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 01:49:05.366] [info] [sql_database.cpp:164] [1931] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 01:49:05.366] [info] [record_manager.cpp:344] [1931] check_db_files file[ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode] not exist system, clear it from database +[2026-05-04 01:49:05.367] [info] [record_manager.cpp:361] [1931] Local file count 11 does not match cached file details 3, need to parse online files. +[2026-05-04 01:49:05.367] [info] [record_manager.cpp:607] [1931] Parsing local files in /opt/usr/gcode/local/ +[2026-05-04 01:49:05.367] [info] [record_manager.cpp:623] [1931] File ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode already exists in cache, skipping parsing. +[2026-05-04 01:49:05.367] [info] [record_manager.cpp:496] [1931] Parsing local file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-04 01:49:05.367] [error] [record_manager.cpp:32] [1931] stat failed /opt/usr/gcode/local//ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-04 01:49:05.367] [info] [record_manager.cpp:383] [1931] color map size: 0 +[2026-05-04 01:49:05.367] [info] [sql_database.cpp:97] [1931] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:49:05.380] [info] [record_manager.cpp:512] [1931] Parsed file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:49:05.381] [info] [record_manager.cpp:496] [1931] Parsing local file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-04 01:49:05.381] [error] [record_manager.cpp:32] [1931] stat failed /opt/usr/gcode/local//ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-04 01:49:05.381] [info] [record_manager.cpp:383] [1931] color map size: 0 +[2026-05-04 01:49:05.381] [info] [sql_database.cpp:97] [1931] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:49:05.395] [info] [record_manager.cpp:512] [1931] Parsed file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:49:05.395] [info] [record_manager.cpp:496] [1931] Parsing local file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-04 01:49:05.395] [error] [record_manager.cpp:32] [1931] stat failed /opt/usr/gcode/local//ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-04 01:49:05.395] [info] [record_manager.cpp:383] [1931] color map size: 0 +[2026-05-04 01:49:05.395] [info] [sql_database.cpp:97] [1931] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:49:05.407] [info] [record_manager.cpp:512] [1931] Parsed file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:49:05.407] [info] [record_manager.cpp:496] [1931] Parsing local file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-04 01:49:05.407] [error] [record_manager.cpp:32] [1931] stat failed /opt/usr/gcode/local//ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-04 01:49:05.407] [info] [record_manager.cpp:383] [1931] color map size: 0 +[2026-05-04 01:49:05.407] [info] [sql_database.cpp:97] [1931] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:49:05.419] [info] [record_manager.cpp:512] [1931] Parsed file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:49:05.419] [info] [record_manager.cpp:496] [1931] Parsing local file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-04 01:49:05.419] [error] [record_manager.cpp:32] [1931] stat failed /opt/usr/gcode/local//ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-04 01:49:05.419] [info] [record_manager.cpp:383] [1931] color map size: 0 +[2026-05-04 01:49:05.419] [info] [sql_database.cpp:97] [1931] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:49:05.431] [info] [record_manager.cpp:512] [1931] Parsed file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:49:05.431] [info] [record_manager.cpp:496] [1931] Parsing local file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-04 01:49:05.431] [error] [record_manager.cpp:32] [1931] stat failed /opt/usr/gcode/local//ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-04 01:49:05.431] [info] [record_manager.cpp:383] [1931] color map size: 0 +[2026-05-04 01:49:05.432] [info] [sql_database.cpp:97] [1931] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:49:05.449] [info] [record_manager.cpp:512] [1931] Parsed file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:49:05.449] [info] [record_manager.cpp:623] [1931] File ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode already exists in cache, skipping parsing. +[2026-05-04 01:49:05.449] [info] [record_manager.cpp:496] [1931] Parsing local file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-04 01:49:05.449] [error] [record_manager.cpp:32] [1931] stat failed /opt/usr/gcode/local//ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-04 01:49:05.449] [info] [record_manager.cpp:383] [1931] color map size: 0 +[2026-05-04 01:49:05.449] [info] [sql_database.cpp:97] [1931] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:49:05.461] [info] [record_manager.cpp:512] [1931] Parsed file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:49:05.461] [info] [record_manager.cpp:623] [1931] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode already exists in cache, skipping parsing. +[2026-05-04 01:49:05.461] [info] [record_manager.cpp:496] [1931] Parsing local file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-04 01:49:05.461] [error] [record_manager.cpp:32] [1931] stat failed /opt/usr/gcode/local//ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-04 01:49:05.461] [info] [record_manager.cpp:383] [1931] color map size: 0 +[2026-05-04 01:49:05.461] [info] [sql_database.cpp:97] [1931] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 01:49:05.475] [info] [record_manager.cpp:512] [1931] Parsed file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 01:49:05.475] [info] [record_manager.cpp:636] [1931] Finished parsing local files, total: 11 +[2026-05-04 01:49:05.475] [info] [record_manager.cpp:365] [1931] RecordManager initialized successfully. +[2026-05-04 01:49:05.503] [info] [pins.cpp:112] [1931] create PrinterPins success! +[2026-05-04 01:49:05.533] [info] [msgproto.cpp:606] [1931] create MessageParser success! +[2026-05-04 01:49:05.533] [info] [mcu.cpp:1963] [1931] restart_via_remoterpc +[2026-05-04 01:49:05.533] [error] [serialhdl.cpp:309] [1931] SerialReader::disconnect() +[2026-05-04 01:49:05.533] [info] [dsp_helper.h:31] [1931] remoterpc_ctrl 0 +[2026-05-04 01:49:05.534] [info] [webhooks.cpp:56] [1931] webhooks client 23072836: New connection +[2026-05-04 01:49:05.542] [info] [webhooks.cpp:1232] [1931] handle_query is_subscribe true : {"canvas_dev":["fds","canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[2026-05-04 01:49:05.543] [info] [webhooks.cpp:1232] [1931] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[2026-05-04 01:49:05.544] [info] [device_ui_message_handle.cpp:65] [1931] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[2026-05-04 01:49:05.544] [info] [device_ui_message_handle.cpp:503] [1931] Total tasks: 3 +[2026-05-04 01:49:05.545] [info] [webhooks.cpp:799] [1931] return handle_sync_info: {"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3} +[2026-05-04 01:49:05.546] [info] [webhooks.cpp:170] [1931] return total: {"id":5,"method":"sync_info","result":{"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3}} +[2026-05-04 01:49:05.607] [warning] [webhooks.cpp:148] [1931] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:49:05.608] [info] [webhooks.cpp:170] [1931] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":7} +[2026-05-04 01:49:05.608] [info] [webhooks.cpp:170] [1931] return total: {"id":9,"result":{}} +[2026-05-04 01:49:05.610] [warning] [webhooks.cpp:148] [1931] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:49:05.610] [info] [webhooks.cpp:170] [1931] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":11} +[2026-05-04 01:49:05.611] [info] [device_ui_message_handle.cpp:255] [1931] Handling bind function request {"script":"get_device_info"} +[2026-05-04 01:49:05.612] [info] [webhooks.cpp:768] [1931] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-05-04 01:49:05.612] [info] [webhooks.cpp:170] [1931] return total: {"id":13,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-05-04 01:49:05.613] [info] [device_ui_message_handle.cpp:65] [1931] Handling sync info request {"region_code":1,"script":"set_region"} +[2026-05-04 01:49:05.614] [info] [device_ui_message_handle.cpp:129] [1931] Handling set region request 1 +[2026-05-04 01:49:05.614] [info] [device_ui_message_handle.cpp:132] [1931] Region is the same as current region: 1 +[2026-05-04 01:49:05.614] [info] [webhooks.cpp:799] [1931] return handle_sync_info: {"script":"set_region"} +[2026-05-04 01:49:05.614] [info] [webhooks.cpp:170] [1931] return total: {"id":15,"method":"sync_info","result":{"script":"set_region"}} +[2026-05-04 01:49:05.621] [info] [webhooks.cpp:170] [1931] return total: {"id":3,"result":{"eventtime":22.818409219,"status":null}} +[2026-05-04 01:49:05.623] [warning] [webhooks.cpp:148] [1931] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:49:05.623] [info] [webhooks.cpp:170] [1931] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":6} +[2026-05-04 01:49:05.624] [info] [device_ui_message_handle.cpp:321] [1931] Get Network access cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-04 01:49:05.624] [info] [webhooks.cpp:756] [1931] return handle_get_network_access_cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-04 01:49:05.624] [info] [webhooks.cpp:170] [1931] return total: {"id":10,"method":"get_network_access_cfg","result":{"object":{"lan_status":true,"token":"miM2yt","token_status":true}}} +[2026-05-04 01:49:05.626] [info] [device_ui_message_handle.cpp:65] [1931] Handling sync info request {"script":"get_device_status"} +[2026-05-04 01:49:05.626] [info] [device_ui_message_handle.cpp:143] [1931] Handling get device status request +[2026-05-04 01:49:05.627] [info] [device_ui_message_handle.cpp:154] [1931] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-04 01:49:05.627] [info] [webhooks.cpp:799] [1931] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-04 01:49:05.628] [info] [webhooks.cpp:170] [1931] return total: {"id":14,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[2026-05-04 01:49:05.629] [info] [webhooks.cpp:170] [1931] return total: {"id":4,"result":{"eventtime":22.818409219,"status":null}} +[2026-05-04 01:49:06.047] [warning] [webhooks.cpp:148] [1931] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:49:06.047] [info] [webhooks.cpp:170] [1931] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":8} +[2026-05-04 01:49:06.048] [info] [device_ui_message_handle.cpp:65] [1931] Handling sync info request {"script":"set_status","status":1,"sub_status":0} +[2026-05-04 01:49:06.048] [info] [device_ui_message_handle.cpp:553] [1931] Setting status: 1, sub_status: 0 +[2026-05-04 01:49:06.048] [info] [device_status.cpp:1204] [1931] Set UI ready: true +[2026-05-04 01:49:06.049] [info] [webhooks.cpp:799] [1931] return handle_sync_info: {"script":"set_status"} +[2026-05-04 01:49:06.049] [info] [webhooks.cpp:170] [1931] return total: {"id":16,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-04 01:49:06.535] [info] [dsp_helper.h:31] [1931] remoterpc_ctrl 1 +[2026-05-04 01:49:06.652] [warning] [webhooks.cpp:148] [1931] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 01:49:06.652] [info] [webhooks.cpp:170] [1931] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":12} +[2026-05-04 01:49:07.653] [info] [msgproto.cpp:606] [1931] create MessageParser success! +[2026-05-04 01:49:07.654] [info] [mcu.cpp:1049] [1931] MCU 'bed_sensor' restart power +[2026-05-04 01:49:08.064] [info] [mcu.cpp:1072] [1931] bootloader mode, try jump to app! +[2026-05-04 01:49:08.087] [info] [msgproto.cpp:606] [1931] create MessageParser success! +[2026-05-04 01:49:08.089] [info] [mcu.cpp:1049] [1931] MCU 'toolhead' restart power +[2026-05-04 01:49:08.499] [info] [mcu.cpp:1072] [1931] bootloader mode, try jump to app! +[2026-05-04 01:49:08.609] [info] [bed_mesh.cpp:1466] [1931] zero_ref_pos size 0 +[2026-05-04 01:49:08.637] [info] [bed_mesh.cpp:2722] [1931] ProfileManager profile->get_name bed_mesh +[2026-05-04 01:49:08.637] [info] [bed_mesh.cpp:2722] [1931] ProfileManager profile->get_name bed_mesh ADAPTIVE +[2026-05-04 01:49:08.637] [info] [bed_mesh.cpp:2722] [1931] ProfileManager profile->get_name bed_mesh default +[2026-05-04 01:49:08.668] [info] [gcode_move.cpp:60] [1931] GCodeMove init! +[2026-05-04 01:49:08.723] [info] [gcode_move.cpp:119] [1931] GCodeMove init success!! +[2026-05-04 01:49:08.723] [info] [gcode_move.cpp:274] [1931] set_move_transform transform: force:false +[2026-05-04 01:49:08.817] [info] [print_stats.cpp:26] [1931] PrintStats init! +[2026-05-04 01:49:08.818] [info] [print_stats.cpp:55] [1931] PrintStats init success!! +[2026-05-04 01:49:08.819] [info] [bed_mesh.cpp:463] [1931] update_status bed_mesh_exist:0x0100 +[2026-05-04 01:49:08.819] [info] [print_stats.cpp:277] [1931] bed_mesh_exist:0x0100 +[2026-05-04 01:49:08.819] [warning] [extras_factory.cpp:323] [1931] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-04 01:49:08.819] [warning] [extras_factory.cpp:323] [1931] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-04 01:49:08.820] [info] [beep_ctrl.cpp:39] [1931] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[2026-05-04 01:49:08.822] [info] [beep_ctrl.cpp:147] [1931] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[2026-05-04 01:49:08.822] [info] [beep_ctrl.cpp:262] [1931] exec_cmd data 0 +[2026-05-04 01:49:08.823] [info] [beep_ctrl.cpp:181] [1931] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[2026-05-04 01:49:08.824] [info] [beep_ctrl.cpp:262] [1931] exec_cmd data 333333 +[2026-05-04 01:49:08.824] [info] [beep_ctrl.cpp:199] [1931] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[2026-05-04 01:49:08.825] [info] [beep_ctrl.cpp:262] [1931] exec_cmd data 166666 +[2026-05-04 01:49:08.825] [info] [beep_ctrl.cpp:217] [1931] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[2026-05-04 01:49:08.825] [info] [beep_ctrl.cpp:262] [1931] exec_cmd data normal +[2026-05-04 01:49:08.886] [info] [query_adc.cpp:36] [1931] QueryADC init success! +[2026-05-04 01:49:08.888] [info] [mmu.cpp:1447] [1931] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[2026-05-04 01:49:08.888] [info] [mmu.cpp:1465] [1931] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[2026-05-04 01:49:08.890] [info] [cavity_fan.cpp:27] [1931] PrinterFanCavity init! +[2026-05-04 01:49:08.891] [info] [cavity_fan.cpp:85] [1931] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[2026-05-04 01:49:08.891] [info] [cavity_fan.cpp:96] [1931] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[2026-05-04 01:49:08.892] [info] [cavity_fan.cpp:104] [1931] temp_drop_det_time 60 5 120 1.5 180 +[2026-05-04 01:49:08.893] [info] [fan.cpp:55] [1931] __func__:Fan #1 str_pin:PD17 +[2026-05-04 01:49:08.894] [info] [cavity_fan.cpp:115] [1931] PrinterFanCavity init success!! +[2026-05-04 01:49:08.894] [info] [stepper_enable.cpp:27] [1931] PrinterStepperEnable init! +[2026-05-04 01:49:08.897] [info] [fan.cpp:55] [1931] __func__:Fan #1 str_pin:PG15 +[2026-05-04 01:49:08.899] [info] [fan.cpp:55] [1931] __func__:Fan #1 str_pin:toolhead:PA8 +[2026-05-04 01:49:08.902] [info] [fan.cpp:55] [1931] __func__:Fan #1 str_pin:PD15 +[2026-05-04 01:49:08.963] [info] [exclude_object.cpp:28] [1931] ExcludeObject init! +[2026-05-04 01:49:08.966] [info] [exclude_object.cpp:79] [1931] ExcludeObject init success! +[2026-05-04 01:49:08.971] [warning] [extras_factory.cpp:323] [1931] create extras: "g180_load_config" failer! +[2026-05-04 01:49:08.974] [info] [heater_bed.cpp:18] [1931] PrinterHeaterBed Init! +[2026-05-04 01:49:09.029] [info] [heaters.cpp:873] [1931] PrinterHeaters init! +[2026-05-04 01:49:09.031] [info] [heaters.cpp:898] [1931] PrinterHeaters init success! +[2026-05-04 01:49:09.045] [info] [heaters.cpp:935] [1931] c->get_name(): thermistor NTC 100K beta 3950 +[2026-05-04 01:49:09.046] [info] [thermistor.cpp:138] [1931] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[2026-05-04 01:49:09.046] [info] [heaters.cpp:935] [1931] c->get_name(): thermistor NTC 100K beta 3950 DSP +[2026-05-04 01:49:09.047] [info] [thermistor.cpp:138] [1931] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[2026-05-04 01:49:09.168] [info] [utilities.cpp:52] [1931] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[2026-05-04 01:49:09.170] [info] [thermistor.cpp:146] [1931] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[2026-05-04 01:49:09.170] [info] [heaters.cpp:935] [1931] c->get_name(): thermistor NTC 100K beta 4300 +[2026-05-04 01:49:09.171] [info] [thermistor.cpp:138] [1931] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[2026-05-04 01:49:09.171] [info] [heaters.cpp:935] [1931] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[2026-05-04 01:49:09.172] [info] [thermistor.cpp:138] [1931] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[2026-05-04 01:49:09.172] [info] [heaters.cpp:935] [1931] c->get_name(): thermistor NTC R25 350 +[2026-05-04 01:49:09.173] [info] [thermistor.cpp:138] [1931] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[2026-05-04 01:49:09.173] [info] [heaters.cpp:943] [1931] PrinterHeaters::load_config success! +[2026-05-04 01:49:09.174] [info] [heaters.cpp:1032] [1931] setup_sensor success! +[2026-05-04 01:49:09.174] [info] [adc_temperature.cpp:29] [1931] __func__:PrinterADCtoTemperature name:heater_bed +[2026-05-04 01:49:09.175] [info] [adc_temperature.cpp:35] [1931] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[2026-05-04 01:49:09.175] [info] [adc_temperature.cpp:165] [1931] name:heater_bed +[2026-05-04 01:49:09.175] [info] [error_mcu.cpp:101] [1931] create PrinterMCUError success! +[2026-05-04 01:49:09.177] [info] [heaters.cpp:83] [1931] Heater init! name: heater_bed +[2026-05-04 01:49:09.177] [info] [heaters.cpp:122] [1931] __func__:Heater,heater_pin:PG13 +[2026-05-04 01:49:09.179] [info] [pid_calibrate.cpp:43] [1931] PIDCalibrate init success!! +[2026-05-04 01:49:09.180] [warning] [heaters.cpp:329] [1931] Heater init success!!!! +[2026-05-04 01:49:09.181] [warning] [heaters.cpp:985] [1931] debug name heater_bed, gcode_id B +[2026-05-04 01:49:09.182] [info] [heater_bed.cpp:41] [1931] PrinterHeaterBed Init success! +[2026-05-04 01:49:09.182] [info] [heater_fan.cpp:24] [1931] PrinterHeaterFan init! +[2026-05-04 01:49:09.183] [info] [fan.cpp:55] [1931] __func__:Fan #1 str_pin:toolhead:PB13 +[2026-05-04 01:49:09.184] [info] [heater_fan.cpp:46] [1931] PrinterHeaterFan init success!! +[2026-05-04 01:49:09.188] [info] [idle_timeout.cpp:28] [1931] init IdleTimeout ... +[2026-05-04 01:49:09.189] [info] [idle_timeout.cpp:72] [1931] init IdleTimeout success !!! +[2026-05-04 01:49:09.222] [info] [bulk_sensor.cpp:312] [1931] unpack_fmt:mqtt_strategy_->is_valid(): true +[2026-05-04 01:49:13.705] [info] [mmu.cpp:2093] [1931] {"command":"CANVAS_SOFTWARE_VERSION","result":"00.00.00.44"} +[2026-05-04 01:49:13.706] [info] [gcode.cpp:1940] [1942] update_device_status: {"command":"CANVAS_SOFTWARE_VERSION","result":"00.00.00.44"} +[2026-05-04 01:49:13.709] [info] [webhooks.cpp:170] [1931] return total: {"id":17,"result":{"eventtime":30.958050056,"status":{"canvas_dev":{"canvas_lite":{"channels0":{"cid":0,"filament":{"brand":"0xEEEEEEEE","code":"0x0000","color":"0x000000","date":"2502","detailed_type":"PLA","diameter":"1.75","manufacturer":"Generic","nozzle_max_temp":"230℃","nozzle_min_temp":"190℃","type":"PLA","weight":"1000"},"status":1},"channels1":{"cid":1,"filament":{"brand":"0xEEEEEEEE","code":"0x0000","color":"0xFFFFFF","date":"2502","detailed_type":"PLA","diameter":"1.75","manufacturer":"Generic","nozzle_max_temp":"230℃","nozzle_min_temp":"190℃","type":"PLA","weight":"1000"},"status":1},"channels2":{"cid":2,"filament":{"brand":"","code":"","color":"","date":"","detailed_type":"","diameter":"","manufacturer":"","nozzle_max_temp":"","nozzle_min_temp":"","type":"","weight":""},"status":0},"channels3":{"cid":3,"filament":{"brand":"","code":"","color":"","date":"","detailed_type":"","diameter":"","manufacturer":"","nozzle_max_temp":"","nozzle_min_temp":"","type":"","weight":""},"status":0},"connected":1,"did":0,"extern_channel":{"filament":{"brand":"0xEEEEEEEE","code":"0x0001","color":"0xFFFFFF","date":"","detailed_type":"PLA","diameter":"1.75","manufacturer":"ELEGOO","nozzle_max_temp":"250.0","nozzle_min_temp":"170.0","type":"PLA","weight":"1000"},"status":0}},"fds":{"connected":0,"dragging":0,"fila_in":0}},"cavity_fan":{"rpm":0.0,"speed":0.0},"controller_fan board_cooling_fan":{"rpm":0.0,"speed":0.0},"extruder":{"target":0.0,"temperature":31.37},"fan":{"rpm":0.0,"speed":0.0},"fan_generic fan1":{"rpm":0.0,"speed":0.0},"gcode_move":{"speed":1500.0,"speed_factor":1.0},"heater_bed":{"target":0.0,"temperature":22.92},"heater_fan heatbreak_cooling_fan":{"rpm":0.0,"speed":0.0},"pause_resume":{"is_paused":false},"print_stats":{"auto_plug_in_filament":null,"bed_mesh_detected":256,"beep_enabled":false,"canvas_runout_filament":null,"cavity_temperature_mode":0,"enabled":1,"filament_detected":true,"filename":"","info":{"current_layer":0,"total_layer":null},"machine_status":1,"machine_sub_status":0,"print_duration":0.0,"state":"standby","total_duration":0.0},"toolhead":{"homed_axes":""},"virtual_sdcard":{"progress":0.0},"ztemperature_sensor box":{"measured_max_temp":22.29,"measured_min_temp":22.28,"temperature":22.29}}}} +[2026-05-04 01:49:13.714] [info] [webhooks.cpp:170] [1931] return total: {"id":18,"result":{"eventtime":30.958050056,"status":null}} +[2026-05-04 01:49:14.002] [info] [clocksync.cpp:206] [1991] mcu 'toolhead': New minimum RTT: sent_time=31.275327806,half_rtt=0.0002590414999996682,freq=119999101.51046972 +[2026-05-04 01:49:14.326] [info] [mqtt_connector.cpp:498] [1995] Starting heartbeat monitor thread. +[2026-05-04 01:49:14.327] [info] [timer_manager.cpp:72] [1995] Adding timer task: LanMQTTStrategy_heartbeat_monitor, interval: 20000 ms, repeat: true +[2026-05-04 01:49:14.327] [info] [mqtt_connector.cpp:295] [1995] Subscribed to topic: elegoo/F01CFFQQFN55YKS/api_register +[2026-05-04 01:49:17.870] [info] [clocksync.cpp:206] [1985] mcu 'bed_sensor': New minimum RTT: sent_time=35.143544308,half_rtt=0.000162499999998289,freq=119998026.57624984 +[2026-05-04 01:49:39.253] [info] [por.cpp:57] [1931] POR CHARGE DONE! +[2026-05-04 01:49:40.592] [info] [clocksync.cpp:206] [1991] mcu 'toolhead': New minimum RTT: sent_time=57.864929319,half_rtt=0.000253437500003173,freq=119998491.55822867 +[2026-05-04 01:50:52.540] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=129.801143728,time_avg=101.1123278933398,freq=24000191.8158494,diff=168523.93783330917(0.007021830743054549),stddev=7057.881401627978 +[2026-05-04 01:51:06.951] [info] [heaters.cpp:423] [1983] __func__:temperature_callback,heater_name:heater_bed,read_time:120.27800000037998,last_temp:22.95872625339348,temp:22.95872625339348,target_temp:0,smoothed_temp:22.94319299566557 +[2026-05-04 01:51:13.091] [info] [heaters.cpp:423] [1991] __func__:temperature_callback,heater_name:extruder,read_time:126.41955061569286,last_temp:30.78094669488638,temp:30.78094669488638,target_temp:0,smoothed_temp:30.506483881528048 +[2026-05-04 01:51:22.048] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=159.307361034,time_avg=130.09061022107738,freq=119998997.75599925,diff=1204029.227760315(0.010033576898002624),stddev=21745.91860998749 +[2026-05-04 01:51:25.269] [info] [device_status.cpp:1674] [1931] Device status change to: 10, last status: 1 +[2026-05-04 01:51:25.276] [info] [homing_override.cpp:238] [1931] need false false false homed false false false +[2026-05-04 01:51:25.279] [info] [gcode.cpp:1940] [1942] update_device_status: {"command":"M2202","result":"2801"} +[2026-05-04 01:51:25.280] [info] [device_status.cpp:989] [1942] M2202 result_code:2801 +[2026-05-04 01:51:25.281] [info] [homing_override.cpp:261] [1931] cmd_G28 cur_temp:30.110866489656093,safe_home_temp:140 +[2026-05-04 01:51:25.292] [info] [extruder.cpp:493] [1931] cmd_M104 temp 140 index -1 wait true +[2026-05-04 01:51:25.294] [info] [verify_heater.cpp:67] [1931] verify_heater:reset_fault heater_name extruder +[2026-05-04 01:51:25.295] [info] [verify_heater.cpp:67] [1931] verify_heater:reset_fault heater_name extruder +[2026-05-04 01:51:25.306] [info] [heaters.cpp:319] [1931] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-04 01:51:25.308] [info] [heaters.cpp:1104] [1931] __func__:set_temperature,temp:140,wait:true +[2026-05-04 01:51:25.309] [info] [toolhead.cpp:904] [1931] get_last_move_time +[2026-05-04 01:51:25.323] [info] [gcode.cpp:1940] [1942] update_device_status: {"command":"M2202","result":"1045"} +[2026-05-04 01:51:25.323] [info] [device_status.cpp:989] [1942] M2202 result_code:1045 +[2026-05-04 01:51:25.676] [info] [verify_heater.cpp:164] [1931] Heater extruder approaching new target of 140 +[2026-05-04 01:51:35.782] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=173.04700599900002,time_avg=143.69075368952892,freq=119999114.42443298,diff=475668.48334884644(0.003963904027907053),stddev=21849.925728442086 +[2026-05-04 01:51:46.692] [info] [verify_heater.cpp:140] [1931] Heater extruder within range of 140 +[2026-05-04 01:51:52.332] [info] [gcode.cpp:1940] [1942] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-04 01:51:52.333] [info] [device_status.cpp:989] [1942] M2202 result_code:1066 +[2026-05-04 01:51:52.333] [info] [heaters.cpp:1236] [1931] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-04 01:51:52.334] [info] [homing_override.cpp:166] [1931] homing_ready axis z +[2026-05-04 01:51:52.606] [info] [homing_override.cpp:175] [1931] homing_ready #2: endstop name z state true +[2026-05-04 01:51:52.610] [info] [mcu.cpp:712] [1931] set_digital pin PE12 166.189284125 189.883164423 +[2026-05-04 01:51:52.623] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=189.891673757,time_avg=160.31927255763367,freq=24000028.365595248,diff=34360.154524326324(0.0014316731051802634),stddev=4295.137936210658 +[2026-05-04 01:51:52.882] [error] [tmc.cpp:359] [1931] TMC stepper_z reports GSTAT: 10000000 reset=1(Reset) +[2026-05-04 01:51:55.261] [info] [gcode.cpp:598] [1931] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-04 01:51:55.602] [info] [gcode.cpp:598] [1931] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-04 01:51:55.630] [info] [gcode_move.cpp:638] [1931] cmd_M114 X:5.000 Y:5.000 Z:19.881 E:0.000 +[2026-05-04 01:51:55.634] [info] [stepper.cpp:573] [1931] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 01:51:55.712] [info] [homing.cpp:152] [1931] kin_spos name stepper_x command_position 390.75 +[2026-05-04 01:51:55.712] [info] [homing.cpp:152] [1931] kin_spos name stepper_y command_position 380.75 +[2026-05-04 01:51:55.713] [info] [homing.cpp:152] [1931] kin_spos name stepper_z command_position 20 +[2026-05-04 01:51:55.821] [info] [mcu.cpp:712] [1931] set_digital pin PF6 169.32094995833333 193.094990633 +[2026-05-04 01:51:55.825] [info] [mcu.cpp:712] [1931] set_digital pin PE15 169.32094995833333 193.098765216 +[2026-05-04 01:51:56.622] [error] [tmc.cpp:359] [1931] TMC stepper_y reports GSTAT: 10000000 reset=1(Reset) +[2026-05-04 01:51:56.642] [error] [tmc.cpp:359] [1931] TMC stepper_x reports GSTAT: 10000000 reset=1(Reset) +[2026-05-04 01:51:56.994] [info] [mcu.cpp:390] [1983] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 01:51:57.343] [info] [mcu.cpp:634] [1931] home_wait pin_value:1 next_clock:4087735404 +[2026-05-04 01:51:57.346] [info] [homing.cpp:266] [1931] endstop_name x tt 170.32210083333334 trigger_time 170.32210083333334 move_end_print_time 170.58650875 +[2026-05-04 01:51:57.349] [info] [homing.cpp:266] [1931] endstop_name x tt 170.32210083333334 trigger_time 170.32210083333334 move_end_print_time 170.58650875 +[2026-05-04 01:51:57.350] [info] [homing.cpp:309] [1931] stepper_name stepper_x over_steps 0 halt_pos -4749 start_pos 0 trig_pos -4749 +[2026-05-04 01:51:57.352] [info] [homing.cpp:309] [1931] stepper_name stepper_y over_steps 0 halt_pos -4749 start_pos 0 trig_pos -4749 +[2026-05-04 01:51:57.464] [info] [stepper.cpp:573] [1931] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 01:51:57.878] [info] [gcode_move.cpp:638] [1931] cmd_M114 X:8.000 Y:5.000 Z:19.876 E:0.000 +[2026-05-04 01:51:57.882] [info] [gcode_move.cpp:638] [1931] cmd_M114 X:8.000 Y:5.000 Z:19.876 E:0.000 +[2026-05-04 01:51:57.885] [info] [stepper.cpp:573] [1931] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 01:51:57.989] [info] [homing.cpp:152] [1931] kin_spos name stepper_x command_position 414 +[2026-05-04 01:51:57.990] [info] [homing.cpp:152] [1931] kin_spos name stepper_y command_position -398 +[2026-05-04 01:51:57.991] [info] [homing.cpp:152] [1931] kin_spos name stepper_z command_position 20 +[2026-05-04 01:51:58.433] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=195.703352759,time_avg=165.77507155839422,freq=119998963.94375835,diff=139649.88143920898(0.0011637490119934082),stddev=19883.999276318442 +[2026-05-04 01:51:58.551] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=195.816560259,time_avg=165.40300122715138,freq=24000025.838495955,diff=20540.16472387314(0.0008558401968280474),stddev=3981.0798785970246 +[2026-05-04 01:51:59.545] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=196.810979302,time_avg=165.40300122715138,freq=24000025.838495955,diff=84348.4384317398(0.0035145182679891585),stddev=3981.0798785970246 +[2026-05-04 01:52:02.609] [info] [mcu.cpp:390] [1983] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 01:52:02.643] [warning] [tmc.cpp:887] [1931] Stepper stepper_y phase change (was 2 now -62) +[2026-05-04 01:52:02.683] [info] [mcu.cpp:634] [1931] home_wait pin_value:1 next_clock:4222427446 +[2026-05-04 01:52:02.695] [info] [homing.cpp:266] [1931] endstop_name y tt 175.93426929166668 trigger_time 175.93426929166668 move_end_print_time 176.19655829166666 +[2026-05-04 01:52:02.698] [info] [homing.cpp:266] [1931] endstop_name y tt 175.93426929166668 trigger_time 175.93426929166668 move_end_print_time 176.19655829166666 +[2026-05-04 01:52:02.700] [info] [homing.cpp:309] [1931] stepper_name stepper_y over_steps 0 halt_pos 16855 start_pos -3946 trig_pos 16855 +[2026-05-04 01:52:02.701] [info] [homing.cpp:309] [1931] stepper_name stepper_x over_steps 0 halt_pos -24747 start_pos -3946 trig_pos -24747 +[2026-05-04 01:52:02.774] [info] [stepper.cpp:573] [1931] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 01:52:03.288] [info] [gcode_move.cpp:638] [1931] cmd_M114 X:8.000 Y:8.000 Z:19.877 E:0.000 +[2026-05-04 01:52:03.291] [info] [gcode_move.cpp:638] [1931] cmd_M114 X:8.000 Y:8.000 Z:19.877 E:0.000 +[2026-05-04 01:52:03.294] [info] [stepper.cpp:573] [1931] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 01:52:03.421] [info] [homing.cpp:152] [1931] kin_spos name stepper_x command_position 393.75 +[2026-05-04 01:52:03.422] [info] [homing.cpp:152] [1931] kin_spos name stepper_y command_position 377.75 +[2026-05-04 01:52:03.423] [info] [homing.cpp:152] [1931] kin_spos name stepper_z command_position 20 +[2026-05-04 01:52:03.893] [info] [mcu.cpp:390] [1983] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 01:52:04.020] [info] [mcu.cpp:634] [1931] home_wait pin_value:1 next_clock:4253310309 +[2026-05-04 01:52:04.023] [info] [homing.cpp:266] [1931] endstop_name x tt 177.22105520833333 trigger_time 177.22105520833333 move_end_print_time 177.48301645833334 +[2026-05-04 01:52:04.026] [info] [homing.cpp:266] [1931] endstop_name x tt 177.22105520833333 trigger_time 177.22105520833333 move_end_print_time 177.48301645833334 +[2026-05-04 01:52:04.027] [info] [homing.cpp:309] [1931] stepper_name stepper_x over_steps 0 halt_pos -24734 start_pos -23944 trig_pos -24734 +[2026-05-04 01:52:04.028] [info] [homing.cpp:309] [1931] stepper_name stepper_y over_steps 0 halt_pos 15262 start_pos 16052 trig_pos 15262 +[2026-05-04 01:52:04.109] [info] [stepper.cpp:573] [1931] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 01:52:04.519] [info] [gcode_move.cpp:638] [1931] cmd_M114 X:8.000 Y:8.000 Z:19.877 E:0.000 +[2026-05-04 01:52:04.522] [info] [gcode_move.cpp:638] [1931] cmd_M114 X:8.000 Y:8.000 Z:19.877 E:0.000 +[2026-05-04 01:52:04.525] [info] [stepper.cpp:573] [1931] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 01:52:04.641] [info] [homing.cpp:152] [1931] kin_spos name stepper_x command_position 414 +[2026-05-04 01:52:04.642] [info] [homing.cpp:152] [1931] kin_spos name stepper_y command_position -398 +[2026-05-04 01:52:04.643] [info] [homing.cpp:152] [1931] kin_spos name stepper_z command_position 20 +[2026-05-04 01:52:05.102] [info] [mcu.cpp:390] [1983] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 01:52:05.217] [info] [mcu.cpp:634] [1931] home_wait pin_value:1 next_clock:4282336138 +[2026-05-04 01:52:05.221] [info] [homing.cpp:266] [1931] endstop_name y tt 178.43046479166668 trigger_time 178.43046479166668 move_end_print_time 178.69118008333345 +[2026-05-04 01:52:05.223] [info] [homing.cpp:266] [1931] endstop_name y tt 178.43046479166668 trigger_time 178.43046479166668 move_end_print_time 178.69118008333345 +[2026-05-04 01:52:05.224] [info] [homing.cpp:309] [1931] stepper_name stepper_y over_steps 0 halt_pos 16856 start_pos 16065 trig_pos 16856 +[2026-05-04 01:52:05.225] [info] [homing.cpp:309] [1931] stepper_name stepper_x over_steps 0 halt_pos -24722 start_pos -23931 trig_pos -24722 +[2026-05-04 01:52:05.322] [info] [stepper.cpp:573] [1931] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 01:52:05.324] [info] [gcode_move.cpp:638] [1931] cmd_M114 X:8.000 Y:8.000 Z:19.877 E:0.000 +[2026-05-04 01:52:05.821] [info] [gcode.cpp:598] [1931] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-04 01:52:06.156] [info] [gcode.cpp:598] [1931] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-04 01:52:06.159] [info] [homing_override.cpp:399] [1931] manual_move z start +[2026-05-04 01:52:06.161] [info] [homing_override.cpp:401] [1931] manual_move z over +[2026-05-04 01:52:06.163] [info] [homing_override.cpp:422] [1931] prev_G28 z start +[2026-05-04 01:52:06.202] [info] [homing.cpp:152] [1931] kin_spos name stepper_x command_position 316.5 +[2026-05-04 01:52:06.204] [info] [homing.cpp:152] [1931] kin_spos name stepper_y command_position -211.5 +[2026-05-04 01:52:06.206] [info] [homing.cpp:152] [1931] kin_spos name stepper_z command_position 383.714709 +[2026-05-04 01:52:09.655] [info] [mcu.cpp:390] [1983] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 01:52:09.735] [info] [mcu.cpp:634] [1931] home_wait pin_value:1 next_clock:4391627483 +[2026-05-04 01:52:09.736] [info] [homing.cpp:266] [1931] endstop_name z tt 182.98422845833332 trigger_time 182.98422845833332 move_end_print_time 183.2459784781258 +[2026-05-04 01:52:09.737] [info] [homing.cpp:309] [1931] stepper_name stepper_z over_steps 0 halt_pos 187 start_pos 8000 trig_pos 187 +[2026-05-04 01:52:09.748] [info] [homing.cpp:152] [1931] kin_spos name stepper_x command_position 316.5 +[2026-05-04 01:52:09.749] [info] [homing.cpp:152] [1931] kin_spos name stepper_y command_position -211.5 +[2026-05-04 01:52:09.750] [info] [homing.cpp:152] [1931] kin_spos name stepper_z command_position 10.570582 +[2026-05-04 01:52:10.840] [info] [mcu.cpp:390] [1983] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 01:52:10.887] [info] [mcu.cpp:634] [1931] home_wait pin_value:1 next_clock:4420068377 +[2026-05-04 01:52:10.891] [info] [homing.cpp:266] [1931] endstop_name z tt 184.16901570833335 trigger_time 184.16901570833335 move_end_print_time 184.43184945833335 +[2026-05-04 01:52:10.894] [info] [homing.cpp:309] [1931] stepper_name stepper_z over_steps 0 halt_pos 189 start_pos 987 trig_pos 189 +[2026-05-04 01:52:10.898] [info] [z_compensation.cpp:264] [1931] ZCompensation handle_home_rails_end +[2026-05-04 01:52:10.899] [info] [z_compensation.cpp:92] [1931] use_fix_ref_temperature true fix_ref_temperature 140 ref_temperature 142.452665634203 +[2026-05-04 01:52:10.900] [info] [homing_override.cpp:424] [1931] prev_G28 z over +[2026-05-04 01:52:10.900] [info] [homing_override.cpp:426] [1931] manual_move z start +[2026-05-04 01:52:10.902] [info] [homing_override.cpp:438] [1931] manual_move z over +[2026-05-04 01:52:10.905] [info] [gcode.cpp:1940] [1942] update_device_status: {"command":"M2202","result":"2802"} +[2026-05-04 01:52:10.906] [info] [device_status.cpp:989] [1942] M2202 result_code:2802 +[2026-05-04 01:52:10.916] [info] [device_status.cpp:1674] [1942] Device status change to: 1, last status: 10 +[2026-05-04 01:52:10.920] [info] [webhooks.cpp:170] [1931] return total: {"id":31,"result":{}} +[2026-05-04 01:52:10.929] [info] [extruder.cpp:493] [1931] cmd_M104 temp 0 index -1 wait false +[2026-05-04 01:52:10.930] [info] [heaters.cpp:1104] [1931] __func__:set_temperature,temp:0,wait:false +[2026-05-04 01:52:10.932] [info] [webhooks.cpp:170] [1931] return total: {"id":32,"result":{}} +[2026-05-04 01:52:17.306] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=214.56970306,time_avg=183.39570715519264,freq=24000030.03217713,diff=43268.822838783264(0.001802867618282636),stddev=3264.421519630393 +[2026-05-04 01:52:18.692] [info] [z_compensation.cpp:285] [1931] ZCompensation z_adjust_mm -0.00356502751460637 +[2026-05-04 01:52:18.694] [info] [webhooks.cpp:170] [1931] return total: {"id":33,"result":{}} +[2026-05-04 01:52:21.701] [info] [webhooks.cpp:170] [1931] return total: {"id":34,"result":{}} +[2026-05-04 01:52:22.649] [info] [webhooks.cpp:170] [1931] return total: {"id":35,"result":{}} +[2026-05-04 01:52:23.445] [info] [z_compensation.cpp:285] [1931] ZCompensation z_adjust_mm -0.006197048681120107 +[2026-05-04 01:52:23.449] [info] [webhooks.cpp:170] [1931] return total: {"id":36,"result":{}} +[2026-05-04 01:52:25.108] [info] [webhooks.cpp:170] [1931] return total: {"id":37,"result":{}} +[2026-05-04 01:52:25.832] [info] [webhooks.cpp:170] [1931] return total: {"id":38,"result":{}} +[2026-05-04 01:52:26.641] [info] [webhooks.cpp:170] [1931] return total: {"id":39,"result":{}} +[2026-05-04 01:52:31.087] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=228.350209567,time_avg=197.1264562952447,freq=24000011.788729195,diff=15255.104125022888(0.0006356293385426203),stddev=2809.7381318961034 +[2026-05-04 01:52:34.900] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=232.16949615200002,time_avg=202.20569403499928,freq=119998741.05800971,diff=182589.96922683716(0.0015215830768903096),stddev=16920.48983200625 +[2026-05-04 01:52:38.974] [info] [clocksync.cpp:223] [1983] mcu 'mcu': Resetting prediction variance: sent_time=236.24756582,time_avg=204.58491324879245,freq=24000008.91515837,diff=-15631.608054161072(-0.0006513170022567113),stddev=2671.6532660197795 +[2026-05-04 01:52:42.924] [info] [z_compensation.cpp:285] [1931] ZCompensation z_adjust_mm -0.016528999296265515 +[2026-05-04 01:52:42.927] [info] [webhooks.cpp:170] [1931] return total: {"id":40,"result":{}} +[2026-05-04 01:52:43.798] [info] [webhooks.cpp:170] [1931] return total: {"id":41,"result":{}} +[2026-05-04 01:52:44.549] [info] [webhooks.cpp:170] [1931] return total: {"id":42,"result":{}} +[2026-05-04 01:52:46.397] [info] [webhooks.cpp:170] [1931] return total: {"id":43,"result":{}} +[2026-05-04 01:53:01.665] [info] [z_compensation.cpp:285] [1931] ZCompensation z_adjust_mm -0.02255823224014953 +[2026-05-04 01:53:01.670] [info] [webhooks.cpp:170] [1931] return total: {"id":44,"result":{}} +[2026-05-04 01:53:02.193] [info] [webhooks.cpp:170] [1931] return total: {"id":45,"result":{}} +[2026-05-04 01:53:02.442] [info] [webhooks.cpp:170] [1931] return total: {"id":46,"result":{}} +[2026-05-04 01:53:02.479] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=259.747803165,time_avg=229.63727094034496,freq=119998492.19626124,diff=205887.06628799438(0.0017157255523999532),stddev=36568.563755641575 +[2026-05-04 01:53:03.504] [info] [webhooks.cpp:170] [1931] return total: {"id":47,"result":{}} +[2026-05-04 01:53:06.412] [info] [webhooks.cpp:170] [1931] return total: {"id":48,"result":{}} +[2026-05-04 01:53:06.949] [info] [heaters.cpp:423] [1983] __func__:temperature_callback,heater_name:heater_bed,read_time:240.27800000038,last_temp:23.00541636799727,temp:23.00541636799727,target_temp:0,smoothed_temp:22.98981300712188 +[2026-05-04 01:53:07.293] [info] [webhooks.cpp:170] [1931] return total: {"id":49,"result":{}} +[2026-05-04 01:53:09.007] [info] [webhooks.cpp:170] [1931] return total: {"id":50,"result":{}} +[2026-05-04 01:53:10.155] [info] [webhooks.cpp:170] [1931] return total: {"id":51,"result":{}} +[2026-05-04 01:53:12.183] [info] [z_compensation.cpp:285] [1931] ZCompensation z_adjust_mm -0.025333012153168556 +[2026-05-04 01:53:12.185] [info] [webhooks.cpp:170] [1931] return total: {"id":52,"result":{}} +[2026-05-04 01:53:13.093] [info] [heaters.cpp:423] [1991] __func__:temperature_callback,heater_name:extruder,read_time:246.42093191709307,last_temp:106.70952533109295,temp:106.70952533109295,target_temp:0,smoothed_temp:106.9115944180647 +[2026-05-04 01:53:13.688] [info] [webhooks.cpp:170] [1931] return total: {"id":53,"result":{}} +[2026-05-04 01:53:15.289] [info] [webhooks.cpp:170] [1931] return total: {"id":54,"result":{}} +[2026-05-04 01:53:16.326] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=273.58598913000003,time_avg=244.01846537342357,freq=119998438.30412778,diff=1221098.8110733032(0.01017582342561086),stddev=33622.78007230939 +[2026-05-04 01:53:16.779] [info] [webhooks.cpp:170] [1931] return total: {"id":55,"result":{}} +[2026-05-04 01:53:17.312] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=274.57083363000004,time_avg=244.01846537342357,freq=119998438.30412778,diff=1324030.8386611938(0.011033590322176615),stddev=33622.78007230939 +[2026-05-04 01:53:21.853] [info] [webhooks.cpp:170] [1931] return total: {"id":56,"result":{}} +[2026-05-04 01:53:24.406] [info] [z_compensation.cpp:285] [1931] ZCompensation z_adjust_mm -0.02816968970127951 +[2026-05-04 01:53:24.410] [info] [webhooks.cpp:170] [1931] return total: {"id":57,"result":{}} +[2026-05-04 01:53:26.319] [info] [webhooks.cpp:170] [1931] return total: {"id":58,"result":{}} +[2026-05-04 01:53:27.808] [info] [webhooks.cpp:170] [1931] return total: {"id":59,"result":{}} +[2026-05-04 01:54:19.334] [info] [clocksync.cpp:206] [1991] mcu 'toolhead': New minimum RTT: sent_time=336.60713770200005,half_rtt=0.00025333299996077585,freq=119997749.93932335 +[2026-05-04 01:55:07.437] [info] [heaters.cpp:423] [1983] __func__:temperature_callback,heater_name:heater_bed,read_time:360.77800000037996,last_temp:23.09863769872129,temp:23.09863769872129,target_temp:0,smoothed_temp:23.101482445464868 +[2026-05-04 01:55:13.082] [info] [heaters.cpp:423] [1991] __func__:temperature_callback,heater_name:extruder,read_time:366.4224206673598,last_temp:71.12678887412471,temp:71.12678887412471,target_temp:0,smoothed_temp:71.20206968271614 +[2026-05-04 01:55:21.431] [warning] [clocksync.cpp:181] [1931] queries_pending 2 +[2026-05-04 01:55:38.102] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=415.382313447,time_avg=385.8295703191807,freq=119998389.25224462,diff=73575.5101776123(0.0006131292514801025),stddev=11453.488416278931 +[2026-05-04 01:55:42.039] [info] [clocksync.cpp:206] [1991] mcu 'toolhead': New minimum RTT: sent_time=419.32028544900004,half_rtt=0.00024847949998729746,freq=119998394.32506907 +[2026-05-04 01:56:24.447] [error] [tmc_uart.cpp:319] [1931] _decode_read error #1 +[2026-05-04 01:57:07.941] [info] [heaters.cpp:423] [1983] __func__:temperature_callback,heater_name:heater_bed,read_time:481.27800000037996,last_temp:23.14000171572468,temp:23.14000171572468,target_temp:0,smoothed_temp:23.147170733137443 +[2026-05-04 01:57:13.088] [info] [heaters.cpp:423] [1991] __func__:temperature_callback,heater_name:extruder,read_time:486.42386776680405,last_temp:51.56060280916142,temp:51.56060280916142,target_temp:0,smoothed_temp:51.561668324389785 +[2026-05-04 01:58:28.806] [info] [extruder.cpp:493] [1931] cmd_M104 temp 0 index -1 wait false +[2026-05-04 01:58:28.806] [info] [heaters.cpp:1104] [1931] __func__:set_temperature,temp:0,wait:false +[2026-05-04 01:58:28.806] [info] [toolhead.cpp:904] [1931] get_last_move_time +[2026-05-04 01:58:48.186] [warning] [clocksync.cpp:181] [1931] queries_pending 2 +[2026-05-04 01:58:58.904] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=616.1810411270001,time_avg=586.6446700449474,freq=119998734.43439028,diff=69485.00672912598(0.0005790417227427165),stddev=2638.4843072745102 +[2026-05-04 01:58:58.968] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=616.245119418,time_avg=586.6997856213526,freq=119998535.13947378,diff=75530.10412597656(0.0006294175343831381),stddev=1292.2799599825014 +[2026-05-04 01:58:59.030] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=616.296682502,time_avg=586.7608221218397,freq=23999999.92271384,diff=12708.502925872803(0.0005295209552447001),stddev=266.5886989576598 +[2026-05-04 01:58:59.888] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=617.165836502,time_avg=586.6446700449474,freq=119998734.43439028,diff=82002.32989501953(0.0006833527491251628),stddev=2638.4843072745102 +[2026-05-04 01:58:59.952] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=617.2292694189999,time_avg=586.6997856213526,freq=119998535.13947378,diff=74127.62661743164(0.0006177302218119303),stddev=1292.2799599825014 +[2026-05-04 01:59:00.005] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=617.281338752,time_avg=586.7608221218397,freq=23999999.92271384,diff=13837.579023361206(0.0005765657926400503),stddev=266.5886989576598 +[2026-05-04 01:59:00.874] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=618.1505790020001,time_avg=586.6446700449474,freq=119998734.43439028,diff=114812.58613586426(0.0009567715511322022),stddev=2638.4843072745102 +[2026-05-04 01:59:00.939] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=618.214885836,time_avg=586.6997856213526,freq=119998535.13947378,diff=86585.37718200684(0.000721544809850057),stddev=1292.2799599825014 +[2026-05-04 01:59:00.991] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=618.266849211,time_avg=586.7608221218397,freq=23999999.92271384,diff=17062.639190673828(0.0007109432996114095),stddev=266.5886989576598 +[2026-05-04 01:59:01.869] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=619.1353845450001,time_avg=586.6446700449474,freq=119998734.43439028,diff=75835.76216125488(0.0006319646846771241),stddev=2638.4843072745102 +[2026-05-04 01:59:01.933] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=619.199138086,time_avg=586.6997856213526,freq=119998535.13947378,diff=1357957.1694641113(0.011316309745534261),stddev=1292.2799599825014 +[2026-05-04 01:59:01.975] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=619.251062628,time_avg=586.7608221218397,freq=23999999.92271384,diff=13022.707256317139(0.0005426128023465474),stddev=266.5886989576598 +[2026-05-04 01:59:02.842] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=620.119541837,time_avg=586.6446700449474,freq=119998734.43439028,diff=72916.23779296875(0.0006076353149414062),stddev=2638.4843072745102 +[2026-05-04 01:59:02.907] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=620.18358942,time_avg=586.6997856213526,freq=119998535.13947378,diff=68375.17335510254(0.0005697931112925212),stddev=1292.2799599825014 +[2026-05-04 01:59:02.959] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=620.235575045,time_avg=586.7608221218397,freq=23999999.92271384,diff=17159.775344848633(0.0007149906393686931),stddev=266.5886989576598 +[2026-05-04 01:59:03.827] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=621.103836129,time_avg=586.6446700449474,freq=119998734.43439028,diff=66870.88679504395(0.0005572573899586996),stddev=2638.4843072745102 +[2026-05-04 01:59:03.891] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=621.167392129,time_avg=586.6997856213526,freq=119998535.13947378,diff=67601.2271118164(0.0005633435592651367),stddev=1292.2799599825014 +[2026-05-04 01:59:03.947] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=621.220071837,time_avg=586.7608221218397,freq=23999999.92271384,diff=19385.843435287476(0.0008077434764703114),stddev=266.5886989576598 +[2026-05-04 01:59:04.811] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=622.0881267130001,time_avg=586.6446700449474,freq=119998734.43439028,diff=65476.49110412598(0.0005456374258677165),stddev=2638.4843072745102 +[2026-05-04 01:59:04.880] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=622.157267254,time_avg=586.6997856213526,freq=119998535.13947378,diff=69450.25610351562(0.0005787521341959636),stddev=1292.2799599825014 +[2026-05-04 01:59:04.929] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=622.204678671,time_avg=586.7608221218397,freq=23999999.92271384,diff=13370.90353012085(0.0005571209804217021),stddev=266.5886989576598 +[2026-05-04 01:59:05.796] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=623.072920713,time_avg=586.6446700449474,freq=119998734.43439028,diff=64788.81253051758(0.0005399067710876465),stddev=2638.4843072745102 +[2026-05-04 01:59:05.875] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=623.14215688,time_avg=586.6997856213526,freq=119998535.13947378,diff=77687.86204528809(0.0006473988503774008),stddev=1292.2799599825014 +[2026-05-04 01:59:05.913] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=623.189814088,time_avg=586.7608221218397,freq=23999999.92271384,diff=16887.97166633606(0.0007036654860973358),stddev=266.5886989576598 +[2026-05-04 01:59:06.780] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=624.057118755,time_avg=586.6446700449474,freq=119998734.43439028,diff=73173.33972167969(0.0006097778310139973),stddev=2638.4843072745102 +[2026-05-04 01:59:06.850] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=624.1264745889999,time_avg=586.6997856213526,freq=119998535.13947378,diff=111150.67021179199(0.0009262555850982666),stddev=1292.2799599825014 +[2026-05-04 01:59:06.899] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=624.175035047,time_avg=586.7608221218397,freq=23999999.92271384,diff=16769.031810760498(0.0006987096587816875),stddev=266.5886989576598 +[2026-05-04 01:59:07.768] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=625.0427760470001,time_avg=586.6446700449474,freq=119998734.43439028,diff=174697.71368408203(0.0014558142807006836),stddev=2638.4843072745102 +[2026-05-04 01:59:07.835] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=625.111473756,time_avg=586.6997856213526,freq=119998535.13947378,diff=68983.5166015625(0.0005748626383463542),stddev=1292.2799599825014 +[2026-05-04 01:59:07.882] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=625.159105214,time_avg=586.7608221218397,freq=23999999.92271384,diff=13130.099866867065(0.0005470874944527944),stddev=266.5886989576598 +[2026-05-04 01:59:08.443] [info] [heaters.cpp:423] [1983] __func__:temperature_callback,heater_name:heater_bed,read_time:601.77800000038,last_temp:23.222605496584265,temp:23.222605496584265,target_temp:0,smoothed_temp:23.20378582651321 +[2026-05-04 01:59:08.749] [info] [clocksync.cpp:223] [1985] mcu 'bed_sensor': Resetting prediction variance: sent_time=626.026320715,time_avg=586.6446700449474,freq=119998734.43439028,diff=90422.29400634766(0.0007535191167195638),stddev=2638.4843072745102 +[2026-05-04 01:59:08.819] [info] [clocksync.cpp:223] [1991] mcu 'toolhead': Resetting prediction variance: sent_time=626.096264756,time_avg=586.6997856213526,freq=119998535.13947378,diff=76270.0980682373(0.0006355841505686442),stddev=1292.2799599825014 +[2026-05-04 01:59:08.867] [info] [clocksync.cpp:223] [1983] mcu 'mcu': Resetting prediction variance: sent_time=626.143514173,time_avg=586.7608221218397,freq=23999999.92271384,diff=16778.159948349(0.0006990899978478749),stddev=266.5886989576598 +[2026-05-04 01:59:13.090] [info] [heaters.cpp:423] [1991] __func__:temperature_callback,heater_name:extruder,read_time:606.4253291040283,last_temp:43.56256707046953,temp:43.56256707046953,target_temp:0,smoothed_temp:43.63344352163182 +[2026-05-04 01:59:17.641] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=634.908534385,time_avg=598.09708406191,freq=119999440.91808623,diff=756235.2372283936(0.006301960310236613),stddev=108479.59357915883 +[2026-05-04 01:59:38.423] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=655.688312937,time_avg=622.5856337170154,freq=24000183.6215489,diff=243578.24107551575(0.01014909337814649),stddev=15402.383518641143 +[2026-05-04 01:59:52.220] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=669.485305402,time_avg=637.0075938255326,freq=24000176.90253094,diff=254346.30122375488(0.010597762550989787),stddev=12495.580763954351 +[2026-05-04 01:59:54.165] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=671.4207315699999,time_avg=639.7919082694488,freq=119999475.03850962,diff=1255163.517578125(0.010459695979817708),stddev=66062.31344921944 +[2026-05-04 01:59:57.119] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=674.3744691539999,time_avg=641.962701816535,freq=119999409.41038872,diff=1257478.2062072754(0.010478985051727296),stddev=64419.942339127985 +[2026-05-04 02:00:50.329] [error] [tmc_uart.cpp:319] [1931] _decode_read error #1 +[2026-05-04 02:01:08.942] [info] [heaters.cpp:423] [1983] __func__:temperature_callback,heater_name:heater_bed,read_time:722.27800000038,last_temp:23.17616121402648,temp:23.17616121402648,target_temp:0,smoothed_temp:23.185723956399336 +[2026-05-04 02:01:13.090] [info] [heaters.cpp:423] [1991] __func__:temperature_callback,heater_name:extruder,read_time:726.4268145738083,last_temp:39.316526376381034,temp:39.316526376381034,target_temp:0,smoothed_temp:39.37354326151396 +[2026-05-04 02:01:19.886] [error] [tmc_uart.cpp:319] [1931] _decode_read error #1 +[2026-05-04 02:01:44.514] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=781.794691497,time_avg=752.1515635167173,freq=24000004.100202143,diff=30455.7049369812(0.00126898770570755),stddev=4395.805359831646 +[2026-05-04 02:02:21.854] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=819.13679214,time_avg=789.5682720872753,freq=119998742.58379658,diff=107677.66902160645(0.0008973139085133871),stddev=18656.88921125392 +[2026-05-04 02:02:27.763] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=825.044215684,time_avg=794.6495252060425,freq=119998695.89315304,diff=98120.26727294922(0.0008176688939412435),stddev=17662.01799759998 +[2026-05-04 02:02:47.555] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=844.827091236,time_avg=815.15400122333,freq=23999902.337471716,diff=264151.19634246826(0.011006299847602844),stddev=6950.194821672953 +[2026-05-04 02:02:50.517] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=847.795251612,time_avg=817.1974985815328,freq=23999930.75619885,diff=98767.21879577637(0.0041153007831573486),stddev=7762.570956831223 +[2026-05-04 02:03:09.433] [info] [heaters.cpp:423] [1983] __func__:temperature_callback,heater_name:heater_bed,read_time:842.77800000038,last_temp:23.201970041283005,temp:23.201970041283005,target_temp:0,smoothed_temp:23.211701391487864 +[2026-05-04 02:03:13.083] [info] [heaters.cpp:423] [1991] __func__:temperature_callback,heater_name:extruder,read_time:846.428260248208,last_temp:36.42350350525925,temp:36.42350350525925,target_temp:0,smoothed_temp:36.545361248012824 +[2026-05-04 02:03:18.070] [info] [clocksync.cpp:206] [1983] mcu 'mcu': New minimum RTT: sent_time=875.358515458,half_rtt=6.918749994611062e-05,freq=23999811.291244827 +[2026-05-04 02:03:34.796] [info] [clocksync.cpp:206] [1991] mcu 'toolhead': New minimum RTT: sent_time=892.0830784249999,half_rtt=0.0002483540000071116,freq=119997615.75233066 +[2026-05-04 02:04:07.215] [info] [clocksync.cpp:206] [1985] mcu 'bed_sensor': New minimum RTT: sent_time=924.502872732,half_rtt=0.00016158349995976096,freq=119998273.43941967 +[2026-05-04 02:04:22.972] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=940.257516031,time_avg=910.6835025649949,freq=119998406.59736127,diff=69853.85443115234(0.0005821154535929362),stddev=13084.130254740434 +[2026-05-04 02:04:23.049] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=940.3234948229999,time_avg=910.7859199039427,freq=119998172.97078931,diff=113097.9690246582(0.000942483075205485),stddev=13610.683952358497 +[2026-05-04 02:04:23.061] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=940.344586656,time_avg=910.7159335217199,freq=23999933.853609312,diff=17803.305770874023(0.000741804407119751),stddev=2721.5108289395835 +[2026-05-04 02:05:09.934] [info] [heaters.cpp:423] [1983] __func__:temperature_callback,heater_name:heater_bed,read_time:963.27800000038,last_temp:23.227762750558895,temp:23.227762750558895,target_temp:0,smoothed_temp:23.25132795276013 +[2026-05-04 02:05:13.086] [info] [heaters.cpp:423] [1991] __func__:temperature_callback,heater_name:extruder,read_time:966.4297286581963,last_temp:34.69654730984263,temp:34.69654730984263,target_temp:0,smoothed_temp:34.59148559872002 +[2026-05-04 02:06:33.460] [info] [z_compensation.cpp:285] [1931] ZCompensation z_adjust_mm 0.1038602970588235 +[2026-05-04 02:06:33.462] [info] [webhooks.cpp:170] [1931] return total: {"id":60,"result":{}} +[2026-05-04 02:06:35.345] [info] [webhooks.cpp:170] [1931] return total: {"id":61,"result":{}} +[2026-05-04 02:06:35.885] [info] [webhooks.cpp:170] [1931] return total: {"id":62,"result":{}} +[2026-05-04 02:06:36.777] [info] [webhooks.cpp:170] [1931] return total: {"id":63,"result":{}} +[2026-05-04 02:06:37.023] [info] [webhooks.cpp:170] [1931] return total: {"id":64,"result":{}} +[2026-05-04 02:06:37.271] [info] [webhooks.cpp:170] [1931] return total: {"id":65,"result":{}} +[2026-05-04 02:06:37.495] [info] [webhooks.cpp:170] [1931] return total: {"id":66,"result":{}} +[2026-05-04 02:06:37.684] [info] [webhooks.cpp:170] [1931] return total: {"id":67,"result":{}} +[2026-05-04 02:06:39.458] [info] [webhooks.cpp:170] [1931] return total: {"id":68,"result":{}} +[2026-05-04 02:06:39.941] [info] [webhooks.cpp:170] [1931] return total: {"id":69,"result":{}} +[2026-05-04 02:06:40.315] [info] [webhooks.cpp:170] [1931] return total: {"id":70,"result":{}} +[2026-05-04 02:06:40.708] [info] [webhooks.cpp:170] [1931] return total: {"id":71,"result":{}} +[2026-05-04 02:06:42.204] [info] [webhooks.cpp:170] [1931] return total: {"id":72,"result":{}} +[2026-05-04 02:06:42.902] [info] [webhooks.cpp:170] [1931] return total: {"id":73,"result":{}} +[2026-05-04 02:06:43.133] [info] [webhooks.cpp:170] [1931] return total: {"id":74,"result":{}} +[2026-05-04 02:06:43.313] [info] [webhooks.cpp:170] [1931] return total: {"id":75,"result":{}} +[2026-05-04 02:06:43.503] [info] [webhooks.cpp:170] [1931] return total: {"id":76,"result":{}} +[2026-05-04 02:06:43.686] [info] [webhooks.cpp:170] [1931] return total: {"id":77,"result":{}} +[2026-05-04 02:06:43.866] [info] [webhooks.cpp:170] [1931] return total: {"id":78,"result":{}} +[2026-05-04 02:06:44.031] [info] [webhooks.cpp:170] [1931] return total: {"id":79,"result":{}} +[2026-05-04 02:06:45.083] [info] [webhooks.cpp:170] [1931] return total: {"id":80,"result":{}} +[2026-05-04 02:06:45.334] [info] [webhooks.cpp:170] [1931] return total: {"id":81,"result":{}} +[2026-05-04 02:06:45.528] [info] [webhooks.cpp:170] [1931] return total: {"id":82,"result":{}} +[2026-05-04 02:06:45.737] [info] [webhooks.cpp:170] [1931] return total: {"id":83,"result":{}} +[2026-05-04 02:06:45.926] [info] [webhooks.cpp:170] [1931] return total: {"id":84,"result":{}} +[2026-05-04 02:06:46.133] [info] [webhooks.cpp:170] [1931] return total: {"id":85,"result":{}} +[2026-05-04 02:06:46.320] [info] [webhooks.cpp:170] [1931] return total: {"id":86,"result":{}} +[2026-05-04 02:06:46.486] [info] [webhooks.cpp:170] [1931] return total: {"id":87,"result":{}} +[2026-05-04 02:06:46.691] [info] [webhooks.cpp:170] [1931] return total: {"id":88,"result":{}} +[2026-05-04 02:06:46.854] [info] [webhooks.cpp:170] [1931] return total: {"id":89,"result":{}} +[2026-05-04 02:06:47.061] [info] [webhooks.cpp:170] [1931] return total: {"id":90,"result":{}} +[2026-05-04 02:06:47.269] [info] [webhooks.cpp:170] [1931] return total: {"id":91,"result":{}} +[2026-05-04 02:06:47.472] [info] [webhooks.cpp:170] [1931] return total: {"id":92,"result":{}} +[2026-05-04 02:06:47.677] [info] [webhooks.cpp:170] [1931] return total: {"id":93,"result":{}} +[2026-05-04 02:06:47.886] [info] [webhooks.cpp:170] [1931] return total: {"id":94,"result":{}} +[2026-05-04 02:06:48.094] [info] [webhooks.cpp:170] [1931] return total: {"id":95,"result":{}} +[2026-05-04 02:06:48.276] [info] [webhooks.cpp:170] [1931] return total: {"id":96,"result":{}} +[2026-05-04 02:06:48.480] [info] [webhooks.cpp:170] [1931] return total: {"id":97,"result":{}} +[2026-05-04 02:06:48.703] [info] [webhooks.cpp:170] [1931] return total: {"id":98,"result":{}} +[2026-05-04 02:06:48.889] [info] [webhooks.cpp:170] [1931] return total: {"id":99,"result":{}} +[2026-05-04 02:06:49.074] [info] [webhooks.cpp:170] [1931] return total: {"id":100,"result":{}} +[2026-05-04 02:06:49.297] [info] [webhooks.cpp:170] [1931] return total: {"id":101,"result":{}} +[2026-05-04 02:06:49.480] [info] [webhooks.cpp:170] [1931] return total: {"id":102,"result":{}} +[2026-05-04 02:06:49.668] [info] [webhooks.cpp:170] [1931] return total: {"id":103,"result":{}} +[2026-05-04 02:06:49.898] [info] [webhooks.cpp:170] [1931] return total: {"id":104,"result":{}} +[2026-05-04 02:06:50.106] [info] [webhooks.cpp:170] [1931] return total: {"id":105,"result":{}} +[2026-05-04 02:06:50.333] [info] [webhooks.cpp:170] [1931] return total: {"id":106,"result":{}} +[2026-05-04 02:06:50.556] [info] [webhooks.cpp:170] [1931] return total: {"id":107,"result":{}} +[2026-05-04 02:06:50.761] [info] [webhooks.cpp:170] [1931] return total: {"id":108,"result":{}} +[2026-05-04 02:06:50.970] [info] [webhooks.cpp:170] [1931] return total: {"id":109,"result":{}} +[2026-05-04 02:06:51.177] [info] [webhooks.cpp:170] [1931] return total: {"id":110,"result":{}} +[2026-05-04 02:06:51.363] [info] [webhooks.cpp:170] [1931] return total: {"id":111,"result":{}} +[2026-05-04 02:06:51.549] [info] [webhooks.cpp:170] [1931] return total: {"id":112,"result":{}} +[2026-05-04 02:06:51.756] [info] [webhooks.cpp:170] [1931] return total: {"id":113,"result":{}} +[2026-05-04 02:06:54.101] [info] [webhooks.cpp:170] [1931] return total: {"id":114,"result":{}} +[2026-05-04 02:06:54.410] [info] [webhooks.cpp:170] [1931] return total: {"id":115,"result":{}} +[2026-05-04 02:06:54.653] [info] [webhooks.cpp:170] [1931] return total: {"id":116,"result":{}} +[2026-05-04 02:06:54.901] [info] [webhooks.cpp:170] [1931] return total: {"id":117,"result":{}} +[2026-05-04 02:06:55.168] [info] [webhooks.cpp:170] [1931] return total: {"id":118,"result":{}} +[2026-05-04 02:06:55.721] [info] [webhooks.cpp:170] [1931] return total: {"id":119,"result":{}} +[2026-05-04 02:06:55.945] [info] [webhooks.cpp:170] [1931] return total: {"id":120,"result":{}} +[2026-05-04 02:06:56.193] [info] [webhooks.cpp:170] [1931] return total: {"id":121,"result":{}} +[2026-05-04 02:06:56.462] [info] [webhooks.cpp:170] [1931] return total: {"id":122,"result":{}} +[2026-05-04 02:06:56.673] [info] [webhooks.cpp:170] [1931] return total: {"id":123,"result":{}} +[2026-05-04 02:06:56.918] [info] [webhooks.cpp:170] [1931] return total: {"id":124,"result":{}} +[2026-05-04 02:06:57.160] [info] [webhooks.cpp:170] [1931] return total: {"id":125,"result":{}} +[2026-05-04 02:06:57.408] [info] [webhooks.cpp:170] [1931] return total: {"id":126,"result":{}} +[2026-05-04 02:06:57.660] [info] [webhooks.cpp:170] [1931] return total: {"id":127,"result":{}} +[2026-05-04 02:06:57.908] [info] [webhooks.cpp:170] [1931] return total: {"id":128,"result":{}} +[2026-05-04 02:06:58.192] [info] [webhooks.cpp:170] [1931] return total: {"id":129,"result":{}} +[2026-05-04 02:06:58.577] [info] [webhooks.cpp:170] [1931] return total: {"id":130,"result":{}} +[2026-05-04 02:06:58.809] [info] [webhooks.cpp:170] [1931] return total: {"id":131,"result":{}} +[2026-05-04 02:06:58.972] [info] [webhooks.cpp:170] [1931] return total: {"id":132,"result":{}} +[2026-05-04 02:06:59.178] [info] [webhooks.cpp:170] [1931] return total: {"id":133,"result":{}} +[2026-05-04 02:06:59.563] [info] [webhooks.cpp:170] [1931] return total: {"id":134,"result":{}} +[2026-05-04 02:06:59.898] [info] [webhooks.cpp:170] [1931] return total: {"id":135,"result":{}} +[2026-05-04 02:07:00.490] [info] [webhooks.cpp:170] [1931] return total: {"id":136,"result":{}} +[2026-05-04 02:07:00.694] [info] [webhooks.cpp:170] [1931] return total: {"id":137,"result":{}} +[2026-05-04 02:07:00.900] [info] [webhooks.cpp:170] [1931] return total: {"id":138,"result":{}} +[2026-05-04 02:07:01.144] [info] [webhooks.cpp:170] [1931] return total: {"id":139,"result":{}} +[2026-05-04 02:07:01.349] [info] [webhooks.cpp:170] [1931] return total: {"id":140,"result":{}} +[2026-05-04 02:07:01.576] [info] [webhooks.cpp:170] [1931] return total: {"id":141,"result":{}} +[2026-05-04 02:07:01.790] [info] [webhooks.cpp:170] [1931] return total: {"id":142,"result":{}} +[2026-05-04 02:07:02.039] [info] [webhooks.cpp:170] [1931] return total: {"id":143,"result":{}} +[2026-05-04 02:07:02.244] [info] [webhooks.cpp:170] [1931] return total: {"id":144,"result":{}} +[2026-05-04 02:07:02.471] [info] [webhooks.cpp:170] [1931] return total: {"id":145,"result":{}} +[2026-05-04 02:07:02.709] [info] [webhooks.cpp:170] [1931] return total: {"id":146,"result":{}} +[2026-05-04 02:07:02.915] [info] [webhooks.cpp:170] [1931] return total: {"id":147,"result":{}} +[2026-05-04 02:07:03.118] [info] [webhooks.cpp:170] [1931] return total: {"id":148,"result":{}} +[2026-05-04 02:07:03.305] [info] [webhooks.cpp:170] [1931] return total: {"id":149,"result":{}} +[2026-05-04 02:07:03.489] [info] [webhooks.cpp:170] [1931] return total: {"id":150,"result":{}} +[2026-05-04 02:07:08.751] [info] [webhooks.cpp:170] [1931] return total: {"id":151,"result":{}} +[2026-05-04 02:07:10.182] [info] [webhooks.cpp:170] [1931] return total: {"id":152,"result":{}} +[2026-05-04 02:07:10.434] [info] [heaters.cpp:423] [1983] __func__:temperature_callback,heater_name:heater_bed,read_time:1083.77800000038,last_temp:23.315337835512935,temp:23.315337835512935,target_temp:0,smoothed_temp:23.300796491495674 +[2026-05-04 02:07:10.965] [info] [webhooks.cpp:170] [1931] return total: {"id":153,"result":{}} +[2026-05-04 02:07:11.555] [info] [device_status.cpp:1674] [1931] Device status change to: 10, last status: 1 +[2026-05-04 02:07:11.556] [info] [homing_override.cpp:238] [1931] need true false false homed true true true +[2026-05-04 02:07:11.557] [info] [gcode.cpp:1940] [1942] update_device_status: {"command":"M2202","result":"2801"} +[2026-05-04 02:07:11.557] [info] [device_status.cpp:989] [1942] M2202 result_code:2801 +[2026-05-04 02:07:11.558] [info] [homing_override.cpp:261] [1931] cmd_G28 cur_temp:33.065909040556534,safe_home_temp:140 +[2026-05-04 02:07:11.559] [info] [gcode.cpp:1940] [1942] update_device_status: {"command":"M2202","result":"1045"} +[2026-05-04 02:07:11.559] [info] [device_status.cpp:989] [1942] M2202 result_code:1045 +[2026-05-04 02:07:11.560] [info] [extruder.cpp:493] [1931] cmd_M104 temp 140 index -1 wait true +[2026-05-04 02:07:11.561] [info] [verify_heater.cpp:67] [1931] verify_heater:reset_fault heater_name extruder +[2026-05-04 02:07:11.561] [info] [verify_heater.cpp:67] [1931] verify_heater:reset_fault heater_name extruder +[2026-05-04 02:07:11.561] [info] [heaters.cpp:319] [1931] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-04 02:07:11.561] [info] [heaters.cpp:1104] [1931] __func__:set_temperature,temp:140,wait:true +[2026-05-04 02:07:11.561] [info] [toolhead.cpp:904] [1931] get_last_move_time +[2026-05-04 02:07:11.835] [info] [verify_heater.cpp:164] [1931] Heater extruder approaching new target of 140 +[2026-05-04 02:07:13.088] [info] [heaters.cpp:423] [1991] __func__:temperature_callback,heater_name:extruder,read_time:1086.4312034582083,last_temp:34.213410690612136,temp:34.213410690612136,target_temp:140,smoothed_temp:33.61210994064701 +[2026-05-04 02:07:23.218] [warning] [clocksync.cpp:181] [1931] queries_pending 2 +[2026-05-04 02:07:30.109] [warning] [clocksync.cpp:181] [1931] queries_pending 2 +[2026-05-04 02:07:31.094] [info] [clocksync.cpp:206] [1991] mcu 'toolhead': New minimum RTT: sent_time=1128.3799018290001,half_rtt=0.0002484999998841886,freq=119998521.29832217 +[2026-05-04 02:07:31.859] [info] [verify_heater.cpp:140] [1931] Heater extruder within range of 140 +[2026-05-04 02:07:34.574] [info] [gcode.cpp:1940] [1942] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-04 02:07:34.574] [info] [device_status.cpp:989] [1942] M2202 result_code:1066 +[2026-05-04 02:07:34.575] [info] [heaters.cpp:1236] [1931] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-04 02:07:34.575] [info] [homing_override.cpp:166] [1931] homing_ready axis z +[2026-05-04 02:07:34.829] [info] [homing_override.cpp:175] [1931] homing_ready #2: endstop name z state false +[2026-05-04 02:07:35.108] [info] [gcode.cpp:598] [1931] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-04 02:07:35.393] [info] [gcode.cpp:598] [1931] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-04 02:07:35.395] [info] [gcode_move.cpp:638] [1931] cmd_M114 X:17.000 Y:244.000 Z:8.000 E:0.000 +[2026-05-04 02:07:35.396] [info] [stepper.cpp:573] [1931] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:07:35.398] [info] [z_compensation.cpp:285] [1931] ZCompensation z_adjust_mm -0.0007835534767175502 +[2026-05-04 02:07:35.440] [info] [homing.cpp:152] [1931] kin_spos name stepper_x command_position 629.75 +[2026-05-04 02:07:35.441] [info] [homing.cpp:152] [1931] kin_spos name stepper_y command_position 141.75 +[2026-05-04 02:07:35.441] [info] [homing.cpp:152] [1931] kin_spos name stepper_z command_position 8.078191816217894 +[2026-05-04 02:07:36.107] [info] [mcu.cpp:390] [1983] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 02:07:36.125] [warning] [tmc.cpp:887] [1931] Stepper stepper_y phase change (was -62 now 2) +[2026-05-04 02:07:36.128] [info] [mcu.cpp:634] [1931] home_wait pin_value:1 next_clock:26626820027 +[2026-05-04 02:07:36.128] [info] [homing.cpp:266] [1931] endstop_name x tt 1109.4506267916668 trigger_time 1109.4506267916668 move_end_print_time 1109.7026468333333 +[2026-05-04 02:07:36.129] [info] [homing.cpp:266] [1931] endstop_name x tt 1109.4506267916668 trigger_time 1109.4506267916668 move_end_print_time 1109.7026468333333 +[2026-05-04 02:07:36.129] [info] [homing.cpp:309] [1931] stepper_name stepper_x over_steps 0 halt_pos -6078 start_pos -4256 trig_pos -6078 +[2026-05-04 02:07:36.129] [info] [homing.cpp:309] [1931] stepper_name stepper_y over_steps 0 halt_pos -3987 start_pos -2165 trig_pos -3987 +[2026-05-04 02:07:36.159] [info] [stepper.cpp:573] [1931] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:07:36.770] [info] [gcode_move.cpp:638] [1931] cmd_M114 X:8.000 Y:244.000 Z:8.120 E:0.000 +[2026-05-04 02:07:36.772] [info] [gcode_move.cpp:638] [1931] cmd_M114 X:8.000 Y:244.000 Z:8.120 E:0.000 +[2026-05-04 02:07:36.772] [info] [stepper.cpp:573] [1931] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:07:36.802] [info] [homing.cpp:152] [1931] kin_spos name stepper_x command_position 629.75 +[2026-05-04 02:07:36.802] [info] [homing.cpp:152] [1931] kin_spos name stepper_y command_position 141.75 +[2026-05-04 02:07:36.802] [info] [homing.cpp:152] [1931] kin_spos name stepper_z command_position 8.078191816217894 +[2026-05-04 02:07:37.000] [warning] [clocksync.cpp:181] [1931] queries_pending 2 +[2026-05-04 02:07:37.260] [info] [mcu.cpp:390] [1983] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 02:07:37.281] [info] [mcu.cpp:634] [1931] home_wait pin_value:1 next_clock:26654499593 +[2026-05-04 02:07:37.281] [info] [homing.cpp:266] [1931] endstop_name x tt 1110.603942 trigger_time 1110.603942 move_end_print_time 1110.8591112499996 +[2026-05-04 02:07:37.282] [info] [homing.cpp:266] [1931] endstop_name x tt 1110.603942 trigger_time 1110.603942 move_end_print_time 1110.8591112499996 +[2026-05-04 02:07:37.282] [info] [homing.cpp:309] [1931] stepper_name stepper_x over_steps 0 halt_pos -6093 start_pos -5275 trig_pos -6093 +[2026-05-04 02:07:37.282] [info] [homing.cpp:309] [1931] stepper_name stepper_y over_steps 0 halt_pos -4002 start_pos -3184 trig_pos -4002 +[2026-05-04 02:07:37.283] [info] [z_compensation.cpp:285] [1931] ZCompensation z_adjust_mm 0.0019254439105943358 +[2026-05-04 02:07:37.312] [info] [stepper.cpp:573] [1931] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:07:37.312] [info] [gcode_move.cpp:638] [1931] cmd_M114 X:8.000 Y:244.000 Z:8.117 E:0.000 +[2026-05-04 02:07:37.902] [info] [gcode.cpp:598] [1931] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-04 02:07:38.188] [info] [gcode.cpp:598] [1931] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-04 02:07:38.192] [info] [gcode.cpp:1940] [1942] update_device_status: {"command":"M2202","result":"2802"} +[2026-05-04 02:07:38.192] [info] [device_status.cpp:989] [1942] M2202 result_code:2802 +[2026-05-04 02:07:38.192] [info] [device_status.cpp:1674] [1931] Device status change to: 1, last status: 10 +[2026-05-04 02:07:38.196] [info] [webhooks.cpp:170] [1931] return total: {"id":154,"result":{}} +[2026-05-04 02:07:38.197] [info] [extruder.cpp:493] [1931] cmd_M104 temp 0 index -1 wait false +[2026-05-04 02:07:38.198] [info] [heaters.cpp:1104] [1931] __func__:set_temperature,temp:0,wait:false +[2026-05-04 02:07:38.198] [info] [toolhead.cpp:904] [1931] get_last_move_time +[2026-05-04 02:07:38.198] [info] [webhooks.cpp:170] [1931] return total: {"id":155,"result":{}} +[2026-05-04 02:07:47.748] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=1145.033263754,time_avg=1115.4959939459536,freq=119998759.31699382,diff=77561.62408447266(0.0006463468673706055),stddev=2138.218364651773 +[2026-05-04 02:07:47.834] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=1145.11656242,time_avg=1115.5754061026034,freq=119998527.54568611,diff=73231.96412658691(0.0006102663677215576),stddev=1175.250228535502 +[2026-05-04 02:07:47.837] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=1145.11940417,time_avg=1115.5813770962072,freq=23999998.190655686,diff=18349.39860534668(0.0007645582752227783),stddev=346.81528300915767 +[2026-05-04 02:07:48.744] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=1146.0179660039998,time_avg=1115.4959939459536,freq=119998759.31699382,diff=70183.32745361328(0.000584861062113444),stddev=2138.218364651773 +[2026-05-04 02:07:48.817] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=1146.100880213,time_avg=1115.5754061026034,freq=119998527.54568611,diff=62292.16711425781(0.0005191013926188151),stddev=1175.250228535502 +[2026-05-04 02:07:48.822] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=1146.103538421,time_avg=1115.5813770962072,freq=23999998.190655686,diff=44578.15524291992(0.0018574231351216634),stddev=346.81528300915767 +[2026-05-04 02:07:49.718] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=1147.0020469209999,time_avg=1115.4959939459536,freq=119998759.31699382,diff=123770.21992492676(0.0010314184993743896),stddev=2138.218364651773 +[2026-05-04 02:07:49.802] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=1147.08596988,time_avg=1115.5754061026034,freq=119998527.54568611,diff=76622.62664794922(0.0006385218887329101),stddev=1175.250228535502 +[2026-05-04 02:07:49.807] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=1147.09011388,time_avg=1115.5813770962072,freq=23999998.190655686,diff=16673.924297332764(0.0006947468457221985),stddev=346.81528300915767 +[2026-05-04 02:07:50.702] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=1147.9867005879998,time_avg=1115.4959939459536,freq=119998759.31699382,diff=73741.82299804688(0.0006145151916503906),stddev=2138.218364651773 +[2026-05-04 02:07:50.788] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=1148.0706906300002,time_avg=1115.5754061026034,freq=119998527.54568611,diff=67416.58293151855(0.0005618048577626546),stddev=1175.250228535502 +[2026-05-04 02:07:50.794] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=1148.074538505,time_avg=1115.5813770962072,freq=23999998.190655686,diff=36954.70545959473(0.0015397793941497803),stddev=346.81528300915767 +[2026-05-04 02:07:51.686] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=1148.971342631,time_avg=1115.4959939459536,freq=119998759.31699382,diff=72940.29164123535(0.0006078357636769612),stddev=2138.218364651773 +[2026-05-04 02:07:51.775] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=1149.0551642560001,time_avg=1115.5754061026034,freq=119998527.54568611,diff=297787.0553741455(0.002481558794784546),stddev=1175.250228535502 +[2026-05-04 02:07:51.776] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=1149.058215547,time_avg=1115.5813770962072,freq=23999998.190655686,diff=19849.47727203369(0.0008270615530014038),stddev=346.81528300915767 +[2026-05-04 02:07:52.700] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=1149.963022548,time_avg=1115.4959939459536,freq=119998759.31699382,diff=105196.61204528809(0.000876638433710734),stddev=2138.218364651773 +[2026-05-04 02:07:52.758] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=1150.0401560060002,time_avg=1115.5754061026034,freq=119998527.54568611,diff=66287.4107208252(0.0005523950893402099),stddev=1175.250228535502 +[2026-05-04 02:07:52.759] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=1150.042916589,time_avg=1115.5813770962072,freq=23999998.190655686,diff=20217.25093460083(0.000842385455608368),stddev=346.81528300915767 +[2026-05-04 02:07:53.662] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=1150.947255465,time_avg=1115.4959939459536,freq=119998759.31699382,diff=63319.693115234375(0.0005276641092936198),stddev=2138.218364651773 +[2026-05-04 02:07:53.740] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=1151.024466923,time_avg=1115.5754061026034,freq=119998527.54568611,diff=67050.72358703613(0.0005587560298919678),stddev=1175.250228535502 +[2026-05-04 02:07:53.747] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=1151.028127173,time_avg=1115.5813770962072,freq=23999998.190655686,diff=20846.017517089844(0.0008685840632120768),stddev=346.81528300915767 +[2026-05-04 02:07:54.649] [info] [clocksync.cpp:219] [1985] mcu 'bed_sensor': Ignoring clock sample: sent_time=1151.9320373399999,time_avg=1115.4959939459536,freq=119998759.31699382,diff=83826.4952545166(0.0006985541271209717),stddev=2138.218364651773 +[2026-05-04 02:07:54.724] [info] [clocksync.cpp:219] [1991] mcu 'toolhead': Ignoring clock sample: sent_time=1152.0086373400002,time_avg=1115.5754061026034,freq=119998527.54568611,diff=69529.82955932617(0.0005794152463277181),stddev=1175.250228535502 +[2026-05-04 02:07:54.730] [info] [clocksync.cpp:219] [1983] mcu 'mcu': Ignoring clock sample: sent_time=1152.013107799,time_avg=1115.5813770962072,freq=23999998.190655686,diff=22254.775688171387(0.0009272823203404745),stddev=346.81528300915767 +[2026-05-04 02:07:59.226] [info] [webhooks.cpp:56] [1931] webhooks client 23072836: Disconnected +[2026-05-04 02:08:28.424] [info] [logger.cpp:80] [1934] elegoo log init finish! +[2026-05-04 02:08:28.477] [info] [main.cpp:209] [1934] inputtty:./config/printer,gcode_fd:4 +[2026-05-04 02:08:28.650] [info] [main.cpp:226] [1934] Starting Elegoo... +[2026-05-04 02:08:28.650] [info] [main.cpp:228] [1934] start_args.size:17,sizeof(long_options):9 +[2026-05-04 02:08:28.650] [info] [main.cpp:231] [1934] start_args[img_version]:00.00.00.00 +[2026-05-04 02:08:28.650] [info] [main.cpp:231] [1934] start_args[gui_version]:01.01.11.03 +[2026-05-04 02:08:28.650] [info] [main.cpp:231] [1934] start_args[elegoo_version]:03.26.17.07 +[2026-05-04 02:08:28.650] [info] [main.cpp:231] [1934] start_args[camera_version]:00.00.00.00 +[2026-05-04 02:08:28.650] [info] [main.cpp:231] [1934] start_args[canvas_version]:00.00.00.00 +[2026-05-04 02:08:28.650] [info] [main.cpp:231] [1934] start_args[ota_version]:01.03.02.36 +[2026-05-04 02:08:28.650] [info] [main.cpp:231] [1934] start_args[bed_sensor_version]:00.00.00.00 +[2026-05-04 02:08:28.650] [info] [main.cpp:231] [1934] start_args[start_reason]:startup +[2026-05-04 02:08:28.650] [info] [main.cpp:231] [1934] start_args[apiserver]:/tmp/elegoo_uds +[2026-05-04 02:08:28.650] [info] [main.cpp:231] [1934] start_args[toolhead_gd32_version]:00.00.00.00 +[2026-05-04 02:08:28.650] [info] [main.cpp:231] [1934] start_args[autosave_file]:/opt/usr/cfg/autosave.cfg +[2026-05-04 02:08:28.651] [info] [main.cpp:231] [1934] start_args[gcode_fd]:4 +[2026-05-04 02:08:28.651] [info] [main.cpp:231] [1934] start_args[config_file]:/opt/inst/printer_dsp.cfg +[2026-05-04 02:08:28.651] [info] [main.cpp:231] [1934] start_args[cpu_info]:2 core ARMv7 Processor rev 5 (v7l) +[2026-05-04 02:08:28.651] [info] [main.cpp:231] [1934] start_args[mcu_gd32_version]:00.00.00.00 +[2026-05-04 02:08:28.651] [info] [main.cpp:231] [1934] start_args[machine_model]:Centauri Carbon 2 +[2026-05-04 02:08:28.651] [info] [main.cpp:231] [1934] start_args[os_version]:01.02.12.01 +[2026-05-04 02:08:28.651] [info] [main.cpp:236] [1934] long_options[debuginput]:i +[2026-05-04 02:08:28.651] [info] [main.cpp:236] [1934] long_options[input-tty]:I +[2026-05-04 02:08:28.651] [info] [main.cpp:236] [1934] long_options[api-server]:a +[2026-05-04 02:08:28.651] [info] [main.cpp:236] [1934] long_options[logfile]:l +[2026-05-04 02:08:28.651] [info] [main.cpp:236] [1934] long_options[verbose]:v +[2026-05-04 02:08:28.651] [info] [main.cpp:236] [1934] long_options[debugoutput]:o +[2026-05-04 02:08:28.651] [info] [main.cpp:236] [1934] long_options[dictionary]:d +[2026-05-04 02:08:28.651] [info] [main.cpp:236] [1934] long_options[import-test]:t +[2026-05-04 02:08:28.652] [info] [printer.cpp:50] [1934] create Printer success! +[2026-05-04 02:08:28.652] [info] [printer.cpp:366] [1934] connect begin! +[2026-05-04 02:08:28.652] [info] [printer.cpp:284] [1934] read_config begin! +[2026-05-04 02:08:28.679] [info] [gcode.cpp:1927] [1945] create DeviceStatusWorker success!! +[2026-05-04 02:08:28.722] [info] [webhooks.cpp:607] [1934] create WebHooks success! +[2026-05-04 02:08:28.722] [info] [webhooks.cpp:384] [1934] create ServerSocket success! /tmp/elegoo_uds +[2026-05-04 02:08:28.723] [info] [webhooks.cpp:443] [1934] create ServerSocket success! +[2026-05-04 02:08:28.723] [info] [webhooks.cpp:1317] [1947] create DeviceExceptWorker success!! +[2026-05-04 02:08:29.023] [info] [config_manager.cpp:171] [1934] begin read sn info +[2026-05-04 02:08:29.023] [info] [config_manager.cpp:205] [1934] read product auth success, sn: F01CFFQQFN55YKS +[2026-05-04 02:08:29.025] [info] [config_manager.cpp:148] [1934] machine: {"machine":{"model":"Centauri Carbon 2"},"versions":[{"os_version":"01.02.12.01"},{"mcu_gd32_version":"00.00.00.00"},{"toolhead_gd32_version":"00.00.00.00"},{"bed_sensor_version":"00.00.00.00"},{"canvas_version":"00.00.00.00"},{"camera_version":"00.00.00.00"},{"elegoo_version":"03.26.17.07"},{"gui_version":"01.01.11.03"},{"ota_version":"01.03.02.36"},{"img_version":"00.00.00.00"}]} +[2026-05-04 02:08:29.025] [info] [config_manager.cpp:209] [1934] begin read supplement info +[2026-05-04 02:08:29.027] [info] [config_manager.cpp:306] [1934] token info: token: miM2yt, token_switch_enabled: true, is_lan_mode: true, power_outage_resume_enabled: true, region: 1 +[2026-05-04 02:08:29.030] [info] [config_manager.cpp:453] [1934] load persistent supplement info success +[2026-05-04 02:08:29.031] [info] [device_status.cpp:133] [1934] Create component manager for Centauri Carbon 2 +[2026-05-04 02:08:29.196] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_details WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_details GROUP BY filename HAVING MAX(create_time)); +[2026-05-04 02:08:29.212] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_thumbnail WHERE rowid NOT IN (SELECT MIN(rowid) FROM file_thumbnail GROUP BY filename); +[2026-05-04 02:08:29.214] [info] [record_manager.cpp:302] [1934] Loaded 3 tasks from the database. +[2026-05-04 02:08:29.214] [info] [record_manager.cpp:307] [1934] end task info id a065d20a-a124-4f32-afca-a3dfb699ae8c name ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode status 2. +[2026-05-04 02:08:29.215] [info] [record_manager.cpp:318] [1934] Loaded 10 files from the database. +[2026-05-04 02:08:29.216] [info] [record_manager.cpp:323] [1934] Loaded 3 thumbnails from the database. +[2026-05-04 02:08:29.217] [info] [record_manager.cpp:328] [1934] Loaded 0 delete file records from the database. +[2026-05-04 02:08:29.217] [info] [sql_database.cpp:417] [1934] Loaded exception message: id 6, code 803 +[2026-05-04 02:08:29.217] [info] [sql_database.cpp:417] [1934] Loaded exception message: id 5, code 802 +[2026-05-04 02:08:29.217] [info] [sql_database.cpp:417] [1934] Loaded exception message: id 4, code 1263 +[2026-05-04 02:08:29.217] [info] [sql_database.cpp:417] [1934] Loaded exception message: id 3, code 1263 +[2026-05-04 02:08:29.218] [info] [sql_database.cpp:417] [1934] Loaded exception message: id 2, code 801 +[2026-05-04 02:08:29.218] [info] [sql_database.cpp:417] [1934] Loaded exception message: id 1, code 801 +[2026-05-04 02:08:29.218] [info] [record_manager.cpp:333] [1934] Loaded 6 exception messages from the database. +[2026-05-04 02:08:29.218] [info] [record_manager.cpp:827] [1934] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode +[2026-05-04 02:08:29.218] [info] [record_manager.cpp:827] [1934] File exists: /opt/usr/gcode/local/ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode +[2026-05-04 02:08:29.219] [info] [record_manager.cpp:827] [1934] File exists: /opt/usr/gcode/local/IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode +[2026-05-04 02:08:29.221] [info] [record_manager.cpp:831] [1934] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-04 02:08:29.221] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 02:08:29.234] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 02:08:29.235] [info] [record_manager.cpp:344] [1934] check_db_files file[ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode] not exist system, clear it from database +[2026-05-04 02:08:29.236] [info] [record_manager.cpp:831] [1934] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-04 02:08:29.236] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 02:08:29.248] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 02:08:29.249] [info] [record_manager.cpp:344] [1934] check_db_files file[ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode] not exist system, clear it from database +[2026-05-04 02:08:29.250] [info] [record_manager.cpp:831] [1934] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-04 02:08:29.250] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 02:08:29.280] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 02:08:29.281] [info] [record_manager.cpp:344] [1934] check_db_files file[ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode] not exist system, clear it from database +[2026-05-04 02:08:29.282] [info] [record_manager.cpp:831] [1934] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-04 02:08:29.282] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 02:08:29.295] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 02:08:29.296] [info] [record_manager.cpp:344] [1934] check_db_files file[ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode] not exist system, clear it from database +[2026-05-04 02:08:29.297] [info] [record_manager.cpp:831] [1934] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-04 02:08:29.297] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 02:08:29.309] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 02:08:29.309] [info] [record_manager.cpp:344] [1934] check_db_files file[ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode] not exist system, clear it from database +[2026-05-04 02:08:29.310] [info] [record_manager.cpp:831] [1934] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-04 02:08:29.310] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 02:08:29.323] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 02:08:29.324] [info] [record_manager.cpp:344] [1934] check_db_files file[ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode] not exist system, clear it from database +[2026-05-04 02:08:29.325] [info] [record_manager.cpp:831] [1934] File does not exist in filesystem: /opt/usr/gcode/local/ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-04 02:08:29.325] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_details WHERE filename = ?; +[2026-05-04 02:08:29.337] [info] [sql_database.cpp:164] [1934] Delete SQL: DELETE FROM file_thumbnail WHERE filename = ?; +[2026-05-04 02:08:29.338] [info] [record_manager.cpp:344] [1934] check_db_files file[ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode] not exist system, clear it from database +[2026-05-04 02:08:29.339] [info] [record_manager.cpp:361] [1934] Local file count 11 does not match cached file details 3, need to parse online files. +[2026-05-04 02:08:29.339] [info] [record_manager.cpp:607] [1934] Parsing local files in /opt/usr/gcode/local/ +[2026-05-04 02:08:29.339] [info] [record_manager.cpp:623] [1934] File ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode already exists in cache, skipping parsing. +[2026-05-04 02:08:29.339] [info] [record_manager.cpp:496] [1934] Parsing local file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-04 02:08:29.339] [error] [record_manager.cpp:32] [1934] stat failed /opt/usr/gcode/local//ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode +[2026-05-04 02:08:29.339] [info] [record_manager.cpp:383] [1934] color map size: 0 +[2026-05-04 02:08:29.340] [info] [sql_database.cpp:97] [1934] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 02:08:29.353] [info] [record_manager.cpp:512] [1934] Parsed file: ECC2_0.4_PTFE Tube Tool_Elegoo PLA _0.2_20m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 02:08:29.354] [info] [record_manager.cpp:496] [1934] Parsing local file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-04 02:08:29.354] [error] [record_manager.cpp:32] [1934] stat failed /opt/usr/gcode/local//ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode +[2026-05-04 02:08:29.354] [info] [record_manager.cpp:383] [1934] color map size: 0 +[2026-05-04 02:08:29.354] [info] [sql_database.cpp:97] [1934] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 02:08:29.365] [info] [record_manager.cpp:512] [1934] Parsed file: ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 02:08:29.366] [info] [record_manager.cpp:496] [1934] Parsing local file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-04 02:08:29.367] [error] [record_manager.cpp:32] [1934] stat failed /opt/usr/gcode/local//ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode +[2026-05-04 02:08:29.367] [info] [record_manager.cpp:383] [1934] color map size: 0 +[2026-05-04 02:08:29.367] [info] [sql_database.cpp:97] [1934] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 02:08:29.379] [info] [record_manager.cpp:512] [1934] Parsed file: ECC2_0.4_3DBenchy_Elegoo PLA _0.2_41m50s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 02:08:29.379] [info] [record_manager.cpp:496] [1934] Parsing local file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-04 02:08:29.379] [error] [record_manager.cpp:32] [1934] stat failed /opt/usr/gcode/local//ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode +[2026-05-04 02:08:29.379] [info] [record_manager.cpp:383] [1934] color map size: 0 +[2026-05-04 02:08:29.379] [info] [sql_database.cpp:97] [1934] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 02:08:29.393] [info] [record_manager.cpp:512] [1934] Parsed file: ECC2_0.4_Otter_Elegoo PLA _0.2_15m24s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 02:08:29.394] [info] [record_manager.cpp:496] [1934] Parsing local file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-04 02:08:29.394] [error] [record_manager.cpp:32] [1934] stat failed /opt/usr/gcode/local//ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode +[2026-05-04 02:08:29.394] [info] [record_manager.cpp:383] [1934] color map size: 0 +[2026-05-04 02:08:29.394] [info] [sql_database.cpp:97] [1934] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 02:08:29.405] [info] [record_manager.cpp:512] [1934] Parsed file: ECC2_0.4_CC2 MINI Desk organizer_Elegoo PLA _0.2_1h52m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 02:08:29.406] [info] [record_manager.cpp:496] [1934] Parsing local file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-04 02:08:29.406] [error] [record_manager.cpp:32] [1934] stat failed /opt/usr/gcode/local//ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode +[2026-05-04 02:08:29.406] [info] [record_manager.cpp:383] [1934] color map size: 0 +[2026-05-04 02:08:29.406] [info] [sql_database.cpp:97] [1934] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 02:08:29.417] [info] [record_manager.cpp:512] [1934] Parsed file: ECC2_0.4_Vase_Elegoo PLA _0.12_5h17m.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 02:08:29.417] [info] [record_manager.cpp:623] [1934] File ECC2_0.4_Wallet for IPhone - Back Cover_PETG_0.24_3h0m.gcode already exists in cache, skipping parsing. +[2026-05-04 02:08:29.417] [info] [record_manager.cpp:496] [1934] Parsing local file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-04 02:08:29.417] [error] [record_manager.cpp:32] [1934] stat failed /opt/usr/gcode/local//ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode +[2026-05-04 02:08:29.418] [info] [record_manager.cpp:383] [1934] color map size: 0 +[2026-05-04 02:08:29.418] [info] [sql_database.cpp:97] [1934] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 02:08:29.431] [info] [record_manager.cpp:512] [1934] Parsed file: ECC2_0.4_The Buddha_Elegoo PLA _0.2_25m47s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 02:08:29.431] [info] [record_manager.cpp:623] [1934] File IMPORT_ME_DO_NOT_PRINT______________________'$(sh $(printf %.1smnt%.1sexUDISK%.1sinstall_opencentauri%.1srun.sh $PWD $PWD $PWD $PWD))'.gcode already exists in cache, skipping parsing. +[2026-05-04 02:08:29.431] [info] [record_manager.cpp:496] [1934] Parsing local file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-04 02:08:29.431] [error] [record_manager.cpp:32] [1934] stat failed /opt/usr/gcode/local//ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode +[2026-05-04 02:08:29.432] [info] [record_manager.cpp:383] [1934] color map size: 0 +[2026-05-04 02:08:29.432] [info] [sql_database.cpp:97] [1934] Insert SQL: INSERT INTO file_details (filename, print_time, layer, size, create_time, total_filament_used, total_print_times, last_print_time, color_map, upload_flag) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?); +[2026-05-04 02:08:29.444] [info] [record_manager.cpp:512] [1934] Parsed file: ECC2_0.4_Elegoo Nameplate_Elegoo PLA _0.2_17m28s.gcode, size: 0, layer: 0, print_time: 0, total_filament_used: 0, color_map size: 0 +[2026-05-04 02:08:29.444] [info] [record_manager.cpp:636] [1934] Finished parsing local files, total: 11 +[2026-05-04 02:08:29.444] [info] [record_manager.cpp:365] [1934] RecordManager initialized successfully. +[2026-05-04 02:08:29.445] [info] [pins.cpp:112] [1934] create PrinterPins success! +[2026-05-04 02:08:29.475] [info] [msgproto.cpp:606] [1934] create MessageParser success! +[2026-05-04 02:08:29.475] [info] [mcu.cpp:1963] [1934] restart_via_remoterpc +[2026-05-04 02:08:29.475] [error] [serialhdl.cpp:309] [1934] SerialReader::disconnect() +[2026-05-04 02:08:29.475] [info] [dsp_helper.h:31] [1934] remoterpc_ctrl 0 +[2026-05-04 02:08:29.650] [info] [webhooks.cpp:56] [1934] webhooks client 21729148: New connection +[2026-05-04 02:08:29.655] [info] [webhooks.cpp:1232] [1934] handle_query is_subscribe true : {"canvas_dev":["fds","canvas_lite"],"cavity_fan":["speed","rpm"],"controller_fan board_cooling_fan":["speed","rpm"],"extruder":["temperature","target"],"fan":["speed","rpm"],"fan_generic box_fan":["speed","rpm"],"fan_generic fan1":["speed","rpm"],"gcode_move":["speed","speed_factor"],"heater_bed":["temperature","target"],"heater_fan heatbreak_cooling_fan":["speed","rpm"],"heater_generic":["temperature","target"],"pause_resume":["is_paused"],"print_stats":["filename","state","total_duration","print_duration","info","filament_detected","enabled","bed_mesh_detected","canvas_runout_filament","auto_plug_in_filament","machine_status","machine_sub_status","cavity_temperature_mode","beep_enabled"],"toolhead":["homed_axes"],"virtual_sdcard":["progress"],"ztemperature_sensor box":["temperature","measured_min_temp","measured_max_temp"]} +[2026-05-04 02:08:29.720] [info] [webhooks.cpp:170] [1934] return total: {"id":3,"result":{"eventtime":22.903168344,"status":null}} +[2026-05-04 02:08:29.725] [info] [webhooks.cpp:1232] [1934] handle_query is_subscribe false : {"cavity_temperature":["A","B","C","T0","T1"]} +[2026-05-04 02:08:29.726] [info] [device_ui_message_handle.cpp:65] [1934] Handling sync info request {"limit":10,"offset":0,"script":"get_history_task"} +[2026-05-04 02:08:29.726] [info] [device_ui_message_handle.cpp:503] [1934] Total tasks: 3 +[2026-05-04 02:08:29.728] [info] [webhooks.cpp:799] [1934] return handle_sync_info: {"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3} +[2026-05-04 02:08:29.728] [info] [webhooks.cpp:170] [1934] return total: {"id":5,"method":"sync_info","result":{"history_task_list":[{"begin_time":1777775564,"end_time":1777816797,"task_id":"a065d20a-a124-4f32-afca-a3dfb699ae8c","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777775370,"end_time":1777775557,"task_id":"e716074c-b905-4712-a70b-aa010299b5f5","task_name":"ECC2_0.4_Wallet for IPhone - Back Cover_PLA_0.24_2h59m.gcode","task_status":2},{"begin_time":1777763143,"end_time":1777770014,"task_id":"9052df81-606e-47e9-ab30-68836972683f","task_name":"ECC2_0.4_Scraper_Elegoo PLA _0.2_1h23m.gcode","task_status":1}],"offset":0,"script":"get_history_task","total":3}} +[2026-05-04 02:08:29.730] [warning] [webhooks.cpp:148] [1934] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 02:08:29.731] [info] [webhooks.cpp:170] [1934] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":7} +[2026-05-04 02:08:29.732] [info] [webhooks.cpp:170] [1934] return total: {"id":9,"result":{}} +[2026-05-04 02:08:29.733] [warning] [webhooks.cpp:148] [1934] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 02:08:29.734] [info] [webhooks.cpp:170] [1934] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":11} +[2026-05-04 02:08:29.734] [info] [device_ui_message_handle.cpp:255] [1934] Handling bind function request {"script":"get_device_info"} +[2026-05-04 02:08:29.735] [info] [webhooks.cpp:768] [1934] return handle_bind_func: {"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"} +[2026-05-04 02:08:29.736] [info] [webhooks.cpp:170] [1934] return total: {"id":13,"method":"bind_func","result":{"objects":{"device_model":"Centauri Carbon 2","device_name":"Centauri Carbon 2"},"script":"get_device_info"}} +[2026-05-04 02:08:29.736] [info] [device_ui_message_handle.cpp:65] [1934] Handling sync info request {"region_code":1,"script":"set_region"} +[2026-05-04 02:08:29.737] [info] [device_ui_message_handle.cpp:129] [1934] Handling set region request 1 +[2026-05-04 02:08:29.737] [info] [device_ui_message_handle.cpp:132] [1934] Region is the same as current region: 1 +[2026-05-04 02:08:29.737] [info] [webhooks.cpp:799] [1934] return handle_sync_info: {"script":"set_region"} +[2026-05-04 02:08:29.737] [info] [webhooks.cpp:170] [1934] return total: {"id":15,"method":"sync_info","result":{"script":"set_region"}} +[2026-05-04 02:08:30.161] [warning] [webhooks.cpp:148] [1934] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 02:08:30.162] [info] [webhooks.cpp:170] [1934] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":6} +[2026-05-04 02:08:30.163] [info] [device_ui_message_handle.cpp:321] [1934] Get Network access cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-04 02:08:30.163] [info] [webhooks.cpp:756] [1934] return handle_get_network_access_cfg: {"object":{"lan_status":true,"token":"miM2yt","token_status":true}} +[2026-05-04 02:08:30.163] [info] [webhooks.cpp:170] [1934] return total: {"id":10,"method":"get_network_access_cfg","result":{"object":{"lan_status":true,"token":"miM2yt","token_status":true}}} +[2026-05-04 02:08:30.165] [info] [device_ui_message_handle.cpp:65] [1934] Handling sync info request {"script":"get_device_status"} +[2026-05-04 02:08:30.165] [info] [device_ui_message_handle.cpp:143] [1934] Handling get device status request +[2026-05-04 02:08:30.166] [info] [device_ui_message_handle.cpp:154] [1934] Get Device Status : {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-04 02:08:30.166] [info] [webhooks.cpp:799] [1934] return handle_sync_info: {"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"} +[2026-05-04 02:08:30.167] [info] [webhooks.cpp:170] [1934] return total: {"id":14,"method":"sync_info","result":{"objects":{"ai_detect_p":[0.7,0.8,0.9],"ai_detect_t":[10,20,30],"device_assistant":{"status":1},"power_outage_resume":1,"region_code":1},"script":"get_device_status"}} +[2026-05-04 02:08:30.168] [info] [webhooks.cpp:170] [1934] return total: {"id":4,"result":{"eventtime":23.404514511,"status":null}} +[2026-05-04 02:08:30.170] [warning] [webhooks.cpp:148] [1934] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 02:08:30.171] [info] [webhooks.cpp:170] [1934] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":8} +[2026-05-04 02:08:30.171] [info] [device_ui_message_handle.cpp:65] [1934] Handling sync info request {"script":"set_status","status":1,"sub_status":0} +[2026-05-04 02:08:30.172] [info] [device_ui_message_handle.cpp:553] [1934] Setting status: 1, sub_status: 0 +[2026-05-04 02:08:30.172] [info] [device_status.cpp:1204] [1934] Set UI ready: true +[2026-05-04 02:08:30.172] [info] [webhooks.cpp:799] [1934] return handle_sync_info: {"script":"set_status"} +[2026-05-04 02:08:30.173] [info] [webhooks.cpp:170] [1934] return total: {"id":16,"method":"sync_info","result":{"script":"set_status"}} +[2026-05-04 02:08:30.480] [info] [dsp_helper.h:31] [1934] remoterpc_ctrl 1 +[2026-05-04 02:08:30.602] [warning] [webhooks.cpp:148] [1934] process_request [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments. +[2026-05-04 02:08:30.603] [info] [webhooks.cpp:170] [1934] return total: {"error":{"error":"WebRequestError","message":"[error_code 803] WebRequestError: [error_code 803] CommandError: Printer is not ready The elegoo host software is attempting to connect. Please retry in a few moments."},"id":12} +[2026-05-04 02:08:31.603] [info] [msgproto.cpp:606] [1934] create MessageParser success! +[2026-05-04 02:08:31.606] [info] [mcu.cpp:1049] [1934] MCU 'bed_sensor' restart power +[2026-05-04 02:08:32.015] [info] [mcu.cpp:1072] [1934] bootloader mode, try jump to app! +[2026-05-04 02:08:32.044] [info] [msgproto.cpp:606] [1934] create MessageParser success! +[2026-05-04 02:08:32.046] [info] [mcu.cpp:1049] [1934] MCU 'toolhead' restart power +[2026-05-04 02:08:32.456] [info] [mcu.cpp:1072] [1934] bootloader mode, try jump to app! +[2026-05-04 02:08:32.595] [info] [bed_mesh.cpp:1466] [1934] zero_ref_pos size 0 +[2026-05-04 02:08:32.650] [info] [bed_mesh.cpp:2722] [1934] ProfileManager profile->get_name bed_mesh +[2026-05-04 02:08:32.650] [info] [bed_mesh.cpp:2722] [1934] ProfileManager profile->get_name bed_mesh ADAPTIVE +[2026-05-04 02:08:32.650] [info] [bed_mesh.cpp:2722] [1934] ProfileManager profile->get_name bed_mesh default +[2026-05-04 02:08:32.655] [info] [gcode_move.cpp:60] [1934] GCodeMove init! +[2026-05-04 02:08:32.723] [info] [gcode_move.cpp:119] [1934] GCodeMove init success!! +[2026-05-04 02:08:32.724] [info] [gcode_move.cpp:274] [1934] set_move_transform transform: force:false +[2026-05-04 02:08:32.814] [info] [print_stats.cpp:26] [1934] PrintStats init! +[2026-05-04 02:08:32.815] [info] [print_stats.cpp:55] [1934] PrintStats init success!! +[2026-05-04 02:08:32.815] [info] [bed_mesh.cpp:463] [1934] update_status bed_mesh_exist:0x0100 +[2026-05-04 02:08:32.816] [info] [print_stats.cpp:277] [1934] bed_mesh_exist:0x0100 +[2026-05-04 02:08:32.816] [warning] [extras_factory.cpp:323] [1934] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-04 02:08:32.816] [warning] [extras_factory.cpp:323] [1934] create extras: "bed_mesh_load_config_prefix" failer! +[2026-05-04 02:08:32.817] [info] [beep_ctrl.cpp:39] [1934] beep_enabled false beep_left_time 30 A 10 1 0.5 30 +[2026-05-04 02:08:32.818] [info] [beep_ctrl.cpp:147] [1934] beep_cmd:echo 0 > /sys/class/pwm/pwmchip0/export +[2026-05-04 02:08:32.819] [info] [beep_ctrl.cpp:262] [1934] exec_cmd data 0 +[2026-05-04 02:08:32.819] [info] [beep_ctrl.cpp:181] [1934] beep_cmd:echo 333333 > /sys/class/pwm/pwmchip0/pwm0/period +[2026-05-04 02:08:32.820] [info] [beep_ctrl.cpp:262] [1934] exec_cmd data 333333 +[2026-05-04 02:08:32.820] [info] [beep_ctrl.cpp:199] [1934] beep_cmd:echo 166666 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle +[2026-05-04 02:08:32.820] [info] [beep_ctrl.cpp:262] [1934] exec_cmd data 166666 +[2026-05-04 02:08:32.821] [info] [beep_ctrl.cpp:217] [1934] beep_cmd:echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity +[2026-05-04 02:08:32.821] [info] [beep_ctrl.cpp:262] [1934] exec_cmd data normal +[2026-05-04 02:08:32.854] [info] [query_adc.cpp:36] [1934] QueryADC init success! +[2026-05-04 02:08:32.909] [info] [mmu.cpp:1447] [1934] Canvas printable_height:256 T0 Afalse K75 L80 M300 N300 I0 J179 P5000 Q250 S250 R270 C2 D2 +[2026-05-04 02:08:32.909] [info] [mmu.cpp:1465] [1934] Canvas z_up_height:0 e_flush_dist 15 e_flush_ex_dist 0 flush_accel 10000 x_flush_cool_pos 52.5 x_flush_pos1 52.5 x_flush_pos2 52.5 x_flush_pos3 52.5 x_flush_pos4 52.5 y_flush_pos1 264 y_flush_pos2 264 y_flush_pos3 257 cut_retract_length_toolchange 12 +[2026-05-04 02:08:32.911] [info] [cavity_fan.cpp:27] [1934] PrinterFanCavity init! +[2026-05-04 02:08:32.912] [info] [cavity_fan.cpp:85] [1934] PrinterFanCavity A 1,B 0.2,C 0.1,D 0.2,E 0.1,F 0.3,G 0.5,H 1,T0 36, T1 38,T2 36,T3 37,T4 38,T5 39,TEMP1 1,C1 60,C2 60,P2 0,P3 1,T 60 +[2026-05-04 02:08:32.912] [info] [cavity_fan.cpp:96] [1934] max_cavity_temp pla 40 petg 50 tpu 45 pva 45 cpe:40 bvoh:40 eva:40 +[2026-05-04 02:08:32.913] [info] [cavity_fan.cpp:104] [1934] temp_drop_det_time 60 5 120 1.5 180 +[2026-05-04 02:08:32.914] [info] [fan.cpp:55] [1934] __func__:Fan #1 str_pin:PD17 +[2026-05-04 02:08:32.915] [info] [cavity_fan.cpp:115] [1934] PrinterFanCavity init success!! +[2026-05-04 02:08:32.915] [info] [stepper_enable.cpp:27] [1934] PrinterStepperEnable init! +[2026-05-04 02:08:32.917] [info] [fan.cpp:55] [1934] __func__:Fan #1 str_pin:PG15 +[2026-05-04 02:08:32.920] [info] [fan.cpp:55] [1934] __func__:Fan #1 str_pin:toolhead:PA8 +[2026-05-04 02:08:32.922] [info] [fan.cpp:55] [1934] __func__:Fan #1 str_pin:PD15 +[2026-05-04 02:08:32.954] [info] [exclude_object.cpp:28] [1934] ExcludeObject init! +[2026-05-04 02:08:32.956] [info] [exclude_object.cpp:79] [1934] ExcludeObject init success! +[2026-05-04 02:08:32.988] [warning] [extras_factory.cpp:323] [1934] create extras: "g180_load_config" failer! +[2026-05-04 02:08:32.990] [info] [heater_bed.cpp:18] [1934] PrinterHeaterBed Init! +[2026-05-04 02:08:32.991] [info] [heaters.cpp:873] [1934] PrinterHeaters init! +[2026-05-04 02:08:32.992] [info] [heaters.cpp:898] [1934] PrinterHeaters init success! +[2026-05-04 02:08:33.006] [info] [heaters.cpp:935] [1934] c->get_name(): thermistor NTC 100K beta 3950 +[2026-05-04 02:08:33.007] [info] [thermistor.cpp:138] [1934] name:thermistor NTC 100K beta 3950; dsp:0 pullup:4700 +[2026-05-04 02:08:33.007] [info] [heaters.cpp:935] [1934] c->get_name(): thermistor NTC 100K beta 3950 DSP +[2026-05-04 02:08:33.008] [info] [thermistor.cpp:138] [1934] name:thermistor NTC 100K beta 3950 DSP; dsp:1 pullup:4700 +[2026-05-04 02:08:33.131] [info] [utilities.cpp:52] [1934] popen_exec fw_printenv -n NTC_ohm_val buffer:20000 + +[2026-05-04 02:08:33.132] [info] [thermistor.cpp:146] [1934] PrinterThermistor name:thermistor NTC 100K beta 3950 DSP; pullup_string:20000 +; pullup:20000 4700 +[2026-05-04 02:08:33.133] [info] [heaters.cpp:935] [1934] c->get_name(): thermistor NTC 100K beta 4300 +[2026-05-04 02:08:33.133] [info] [thermistor.cpp:138] [1934] name:thermistor NTC 100K beta 4300; dsp:0 pullup:4700 +[2026-05-04 02:08:33.134] [info] [heaters.cpp:935] [1934] c->get_name(): thermistor NTC 100K MGB18-104F39050L32 +[2026-05-04 02:08:33.134] [info] [thermistor.cpp:138] [1934] name:thermistor NTC 100K MGB18-104F39050L32; dsp:0 pullup:4700 +[2026-05-04 02:08:33.135] [info] [heaters.cpp:935] [1934] c->get_name(): thermistor NTC R25 350 +[2026-05-04 02:08:33.135] [info] [thermistor.cpp:138] [1934] name:thermistor NTC R25 350; dsp:0 pullup:4700 +[2026-05-04 02:08:33.136] [info] [heaters.cpp:943] [1934] PrinterHeaters::load_config success! +[2026-05-04 02:08:33.136] [info] [heaters.cpp:1032] [1934] setup_sensor success! +[2026-05-04 02:08:33.136] [info] [adc_temperature.cpp:29] [1934] __func__:PrinterADCtoTemperature name:heater_bed +[2026-05-04 02:08:33.137] [info] [adc_temperature.cpp:35] [1934] name:heater_bed offline_temp:-10 short_circuit_temp:500 sensor_pin:PH1 sensor_type:NTC 100K beta 3950 DSP +[2026-05-04 02:08:33.165] [info] [adc_temperature.cpp:165] [1934] name:heater_bed +[2026-05-04 02:08:33.166] [info] [error_mcu.cpp:101] [1934] create PrinterMCUError success! +[2026-05-04 02:08:33.167] [info] [heaters.cpp:83] [1934] Heater init! name: heater_bed +[2026-05-04 02:08:33.168] [info] [heaters.cpp:122] [1934] __func__:Heater,heater_pin:PG13 +[2026-05-04 02:08:33.169] [info] [pid_calibrate.cpp:43] [1934] PIDCalibrate init success!! +[2026-05-04 02:08:33.170] [warning] [heaters.cpp:329] [1934] Heater init success!!!! +[2026-05-04 02:08:33.171] [warning] [heaters.cpp:985] [1934] debug name heater_bed, gcode_id B +[2026-05-04 02:08:33.172] [info] [heater_bed.cpp:41] [1934] PrinterHeaterBed Init success! +[2026-05-04 02:08:33.172] [info] [heater_fan.cpp:24] [1934] PrinterHeaterFan init! +[2026-05-04 02:08:33.173] [info] [fan.cpp:55] [1934] __func__:Fan #1 str_pin:toolhead:PB13 +[2026-05-04 02:08:33.174] [info] [heater_fan.cpp:46] [1934] PrinterHeaterFan init success!! +[2026-05-04 02:08:33.206] [info] [idle_timeout.cpp:28] [1934] init IdleTimeout ... +[2026-05-04 02:08:33.207] [info] [idle_timeout.cpp:72] [1934] init IdleTimeout success !!! +[2026-05-04 02:08:33.296] [info] [bulk_sensor.cpp:312] [1934] unpack_fmt:mqtt_strategy_->is_valid(): true +[2026-05-04 02:08:39.054] [info] [mqtt_connector.cpp:498] [2002] Starting heartbeat monitor thread. +[2026-05-04 02:08:39.055] [info] [timer_manager.cpp:72] [2002] Adding timer task: LanMQTTStrategy_heartbeat_monitor, interval: 20000 ms, repeat: true +[2026-05-04 02:08:39.062] [info] [mqtt_connector.cpp:295] [2002] Subscribed to topic: elegoo/F01CFFQQFN55YKS/api_register +[2026-05-04 02:08:46.924] [info] [clocksync.cpp:206] [1988] mcu 'bed_sensor': New minimum RTT: sent_time=40.169793352,half_rtt=0.00017202100000091036,freq=120009099.29199111 +[2026-05-04 02:08:46.980] [info] [clocksync.cpp:206] [1994] mcu 'toolhead': New minimum RTT: sent_time=40.225054644,half_rtt=0.0002615415000022381,freq=120008356.73917852 +[2026-05-04 02:08:48.892] [info] [clocksync.cpp:206] [1988] mcu 'bed_sensor': New minimum RTT: sent_time=42.138075686,half_rtt=0.00016989599999917004,freq=120004204.08689588 +[2026-05-04 02:08:51.902] [info] [clocksync.cpp:206] [1994] mcu 'toolhead': New minimum RTT: sent_time=45.147533229,half_rtt=0.00024827100000379687,freq=120000362.5915172 +[2026-05-04 02:09:03.358] [info] [por.cpp:57] [1934] POR CHARGE DONE! +[2026-05-04 02:09:07.598] [info] [clocksync.cpp:206] [1988] mcu 'bed_sensor': New minimum RTT: sent_time=60.84336282,half_rtt=0.00015854149999938727,freq=119998147.117928 +[2026-05-04 02:09:14.842] [info] [device_status.cpp:1674] [1934] Device status change to: 10, last status: 1 +[2026-05-04 02:09:14.858] [info] [homing_override.cpp:238] [1934] need false false false homed false false false +[2026-05-04 02:09:14.870] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"2801"} +[2026-05-04 02:09:14.871] [info] [device_status.cpp:989] [1945] M2202 result_code:2801 +[2026-05-04 02:09:14.874] [info] [homing_override.cpp:261] [1934] cmd_G28 cur_temp:96.12730299622125,safe_home_temp:140 +[2026-05-04 02:09:14.888] [info] [extruder.cpp:493] [1934] cmd_M104 temp 140 index -1 wait true +[2026-05-04 02:09:14.890] [info] [verify_heater.cpp:67] [1934] verify_heater:reset_fault heater_name extruder +[2026-05-04 02:09:14.890] [info] [verify_heater.cpp:67] [1934] verify_heater:reset_fault heater_name extruder +[2026-05-04 02:09:14.891] [info] [heaters.cpp:319] [1934] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-04 02:09:14.892] [info] [heaters.cpp:1104] [1934] __func__:set_temperature,temp:140,wait:true +[2026-05-04 02:09:14.893] [info] [toolhead.cpp:904] [1934] get_last_move_time +[2026-05-04 02:09:14.903] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1045"} +[2026-05-04 02:09:14.904] [info] [device_status.cpp:989] [1945] M2202 result_code:1045 +[2026-05-04 02:09:15.828] [info] [verify_heater.cpp:164] [1934] Heater extruder approaching new target of 140 +[2026-05-04 02:09:24.866] [info] [verify_heater.cpp:140] [1934] Heater extruder within range of 140 +[2026-05-04 02:09:30.921] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-04 02:09:30.921] [info] [device_status.cpp:989] [1945] M2202 result_code:1066 +[2026-05-04 02:09:30.923] [info] [heaters.cpp:1236] [1934] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-04 02:09:30.924] [info] [homing_override.cpp:166] [1934] homing_ready axis z +[2026-05-04 02:09:31.185] [info] [homing_override.cpp:175] [1934] homing_ready #2: endstop name z state false +[2026-05-04 02:09:31.485] [info] [gcode.cpp:598] [1934] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-04 02:09:31.792] [info] [gcode.cpp:598] [1934] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-04 02:09:31.796] [info] [gcode_move.cpp:638] [1934] cmd_M114 X:5.000 Y:5.000 Z:-0.119 E:0.000 +[2026-05-04 02:09:31.799] [info] [stepper.cpp:573] [1934] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:09:31.919] [info] [homing.cpp:152] [1934] kin_spos name stepper_x command_position 390.75 +[2026-05-04 02:09:31.920] [info] [homing.cpp:152] [1934] kin_spos name stepper_y command_position 380.75 +[2026-05-04 02:09:31.921] [info] [homing.cpp:152] [1934] kin_spos name stepper_z command_position 0 +[2026-05-04 02:09:32.032] [info] [mcu.cpp:712] [1934] set_digital pin PF6 61.58315270833334 85.276628915 +[2026-05-04 02:09:32.037] [info] [mcu.cpp:712] [1934] set_digital pin PE15 61.58315270833334 85.280171707 +[2026-05-04 02:09:32.381] [info] [mcu.cpp:390] [1986] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 02:09:32.928] [info] [mcu.cpp:634] [1934] home_wait pin_value:1 next_clock:1482295502 +[2026-05-04 02:09:32.931] [info] [homing.cpp:266] [1934] endstop_name x tt 61.762104916666665 trigger_time 61.762104916666665 move_end_print_time 62.02409791666667 +[2026-05-04 02:09:32.934] [info] [homing.cpp:266] [1934] endstop_name x tt 61.762104916666665 trigger_time 61.762104916666665 move_end_print_time 62.02409791666667 +[2026-05-04 02:09:32.935] [info] [homing.cpp:309] [1934] stepper_name stepper_x over_steps 0 halt_pos -790 start_pos 0 trig_pos -790 +[2026-05-04 02:09:32.936] [info] [homing.cpp:309] [1934] stepper_name stepper_y over_steps 0 halt_pos -790 start_pos 0 trig_pos -790 +[2026-05-04 02:09:33.192] [info] [stepper.cpp:573] [1934] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:09:33.600] [info] [gcode_move.cpp:638] [1934] cmd_M114 X:8.000 Y:5.000 Z:-0.124 E:0.000 +[2026-05-04 02:09:33.614] [info] [gcode_move.cpp:638] [1934] cmd_M114 X:8.000 Y:5.000 Z:-0.124 E:0.000 +[2026-05-04 02:09:33.617] [info] [stepper.cpp:573] [1934] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:09:33.693] [info] [homing.cpp:152] [1934] kin_spos name stepper_x command_position 414 +[2026-05-04 02:09:33.694] [info] [homing.cpp:152] [1934] kin_spos name stepper_y command_position -398 +[2026-05-04 02:09:33.695] [info] [homing.cpp:152] [1934] kin_spos name stepper_z command_position 0 +[2026-05-04 02:09:38.037] [info] [mcu.cpp:390] [1986] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 02:09:38.072] [warning] [tmc.cpp:887] [1934] Stepper stepper_y phase change (was 4 now -60) +[2026-05-04 02:09:38.116] [info] [mcu.cpp:634] [1934] home_wait pin_value:1 next_clock:1618000908 +[2026-05-04 02:09:38.118] [info] [homing.cpp:266] [1934] endstop_name y tt 67.41649683333333 trigger_time 67.41649683333333 move_end_print_time 67.67762225 +[2026-05-04 02:09:38.121] [info] [homing.cpp:266] [1934] endstop_name y tt 67.41649683333333 trigger_time 67.41649683333333 move_end_print_time 67.67762225 +[2026-05-04 02:09:38.123] [info] [homing.cpp:309] [1934] stepper_name stepper_y over_steps 1 halt_pos 19478 start_pos 13 trig_pos 19477 +[2026-05-04 02:09:38.124] [info] [homing.cpp:309] [1934] stepper_name stepper_x over_steps -1 halt_pos -19452 start_pos 13 trig_pos -19451 +[2026-05-04 02:09:38.222] [info] [stepper.cpp:573] [1934] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:09:38.633] [info] [gcode_move.cpp:638] [1934] cmd_M114 X:8.000 Y:7.988 Z:-0.123 E:0.000 +[2026-05-04 02:09:38.636] [info] [gcode_move.cpp:638] [1934] cmd_M114 X:8.000 Y:7.988 Z:-0.123 E:0.000 +[2026-05-04 02:09:38.639] [info] [stepper.cpp:573] [1934] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:09:38.740] [info] [homing.cpp:152] [1934] kin_spos name stepper_x command_position 393.73754 +[2026-05-04 02:09:38.741] [info] [homing.cpp:152] [1934] kin_spos name stepper_y command_position 377.76246 +[2026-05-04 02:09:38.742] [info] [homing.cpp:152] [1934] kin_spos name stepper_z command_position 0 +[2026-05-04 02:09:39.216] [info] [mcu.cpp:390] [1986] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 02:09:39.310] [info] [mcu.cpp:634] [1934] home_wait pin_value:1 next_clock:1646245732 +[2026-05-04 02:09:39.313] [info] [homing.cpp:266] [1934] endstop_name x tt 68.5933645 trigger_time 68.5933645 move_end_print_time 68.868051125 +[2026-05-04 02:09:39.314] [info] [homing.cpp:266] [1934] endstop_name x tt 68.5933645 trigger_time 68.5933645 move_end_print_time 68.868051125 +[2026-05-04 02:09:39.316] [info] [homing.cpp:309] [1934] stepper_name stepper_x over_steps -1 halt_pos -19446 start_pos -18649 trig_pos -19445 +[2026-05-04 02:09:39.317] [info] [homing.cpp:309] [1934] stepper_name stepper_y over_steps -1 halt_pos 17878 start_pos 18675 trig_pos 17879 +[2026-05-04 02:09:39.467] [info] [stepper.cpp:573] [1934] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:09:39.880] [info] [gcode_move.cpp:638] [1934] cmd_M114 X:7.988 Y:7.988 Z:-0.123 E:0.000 +[2026-05-04 02:09:39.884] [info] [gcode_move.cpp:638] [1934] cmd_M114 X:7.988 Y:7.988 Z:-0.123 E:0.000 +[2026-05-04 02:09:39.897] [info] [stepper.cpp:573] [1934] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:09:39.999] [info] [homing.cpp:152] [1934] kin_spos name stepper_x command_position 413.98754 +[2026-05-04 02:09:40.000] [info] [homing.cpp:152] [1934] kin_spos name stepper_y command_position -398.01246 +[2026-05-04 02:09:40.001] [info] [homing.cpp:152] [1934] kin_spos name stepper_z command_position 0 +[2026-05-04 02:09:40.462] [info] [mcu.cpp:390] [1986] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 02:09:40.541] [info] [mcu.cpp:634] [1934] home_wait pin_value:1 next_clock:1676225412 +[2026-05-04 02:09:40.544] [info] [homing.cpp:266] [1934] endstop_name y tt 69.84251783333333 trigger_time 69.84251783333333 move_end_print_time 70.11751945833333 +[2026-05-04 02:09:40.546] [info] [homing.cpp:266] [1934] endstop_name y tt 69.84251783333333 trigger_time 69.84251783333333 move_end_print_time 70.11751945833333 +[2026-05-04 02:09:40.548] [info] [homing.cpp:309] [1934] stepper_name stepper_y over_steps 0 halt_pos 19478 start_pos 18681 trig_pos 19478 +[2026-05-04 02:09:40.549] [info] [homing.cpp:309] [1934] stepper_name stepper_x over_steps 0 halt_pos -19440 start_pos -18643 trig_pos -19440 +[2026-05-04 02:09:40.640] [info] [stepper.cpp:573] [1934] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:09:40.643] [info] [gcode_move.cpp:638] [1934] cmd_M114 X:7.988 Y:8.000 Z:-0.123 E:0.000 +[2026-05-04 02:09:41.140] [info] [gcode.cpp:598] [1934] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-04 02:09:41.485] [info] [gcode.cpp:598] [1934] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-04 02:09:41.489] [info] [homing_override.cpp:399] [1934] manual_move z start +[2026-05-04 02:09:41.491] [info] [homing_override.cpp:401] [1934] manual_move z over +[2026-05-04 02:09:41.494] [info] [homing_override.cpp:422] [1934] prev_G28 z start +[2026-05-04 02:09:41.549] [info] [homing.cpp:152] [1934] kin_spos name stepper_x command_position 316.5 +[2026-05-04 02:09:41.551] [info] [homing.cpp:152] [1934] kin_spos name stepper_y command_position -211.5 +[2026-05-04 02:09:41.553] [info] [homing.cpp:152] [1934] kin_spos name stepper_z command_position 383.714709 +[2026-05-04 02:09:42.847] [info] [mcu.cpp:712] [1934] set_digital pin PE12 72.39942647701116 96.091396337 +[2026-05-04 02:09:43.202] [info] [mcu.cpp:390] [1986] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 02:09:43.295] [info] [mcu.cpp:634] [1934] home_wait pin_value:1 next_clock:1741816235 +[2026-05-04 02:09:43.297] [info] [homing.cpp:266] [1934] endstop_name z tt 72.57542645833334 trigger_time 72.57542645833334 move_end_print_time 72.84393958333334 +[2026-05-04 02:09:43.298] [info] [homing.cpp:309] [1934] stepper_name stepper_z over_steps 0 halt_pos -604 start_pos 0 trig_pos -604 +[2026-05-04 02:09:43.305] [info] [homing.cpp:152] [1934] kin_spos name stepper_x command_position 316.5 +[2026-05-04 02:09:43.305] [info] [homing.cpp:152] [1934] kin_spos name stepper_y command_position -211.5 +[2026-05-04 02:09:43.306] [info] [homing.cpp:152] [1934] kin_spos name stepper_z command_position 10.570582 +[2026-05-04 02:09:44.387] [info] [mcu.cpp:390] [1986] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 02:09:44.483] [info] [mcu.cpp:634] [1934] home_wait pin_value:1 next_clock:1770354635 +[2026-05-04 02:09:44.487] [info] [homing.cpp:266] [1934] endstop_name z tt 73.76427645833333 trigger_time 73.76427645833333 move_end_print_time 74.029103625 +[2026-05-04 02:09:44.489] [info] [homing.cpp:309] [1934] stepper_name stepper_z over_steps 0 halt_pos -602 start_pos 196 trig_pos -602 +[2026-05-04 02:09:44.492] [info] [z_compensation.cpp:264] [1934] ZCompensation handle_home_rails_end +[2026-05-04 02:09:44.493] [info] [z_compensation.cpp:92] [1934] use_fix_ref_temperature true fix_ref_temperature 140 ref_temperature 142.79096324970521 +[2026-05-04 02:09:44.494] [info] [homing_override.cpp:424] [1934] prev_G28 z over +[2026-05-04 02:09:44.495] [info] [homing_override.cpp:426] [1934] manual_move z start +[2026-05-04 02:09:44.496] [info] [homing_override.cpp:438] [1934] manual_move z over +[2026-05-04 02:09:44.499] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"2802"} +[2026-05-04 02:09:44.499] [info] [device_status.cpp:989] [1945] M2202 result_code:2802 +[2026-05-04 02:09:44.509] [info] [device_status.cpp:1674] [1934] Device status change to: 1, last status: 10 +[2026-05-04 02:09:44.521] [info] [webhooks.cpp:170] [1934] return total: {"id":31,"result":{}} +[2026-05-04 02:09:44.528] [info] [extruder.cpp:493] [1934] cmd_M104 temp 0 index -1 wait false +[2026-05-04 02:09:44.529] [info] [heaters.cpp:1104] [1934] __func__:set_temperature,temp:0,wait:false +[2026-05-04 02:09:44.530] [info] [webhooks.cpp:170] [1934] return total: {"id":32,"result":{}} +[2026-05-04 02:09:51.978] [info] [clocksync.cpp:206] [1986] mcu 'mcu': New minimum RTT: sent_time=105.221464675,half_rtt=8.76454999954035e-05,freq=24000215.35606195 +[2026-05-04 02:09:56.900] [info] [clocksync.cpp:206] [1986] mcu 'mcu': New minimum RTT: sent_time=110.143646844,half_rtt=8.404149999563515e-05,freq=24000079.32132771 +[2026-05-04 02:10:07.870] [info] [z_compensation.cpp:285] [1934] ZCompensation z_adjust_mm -0.010525248788675537 +[2026-05-04 02:10:07.873] [info] [webhooks.cpp:170] [1934] return total: {"id":33,"result":{}} +[2026-05-04 02:10:08.502] [info] [webhooks.cpp:170] [1934] return total: {"id":34,"result":{}} +[2026-05-04 02:10:09.041] [info] [webhooks.cpp:170] [1934] return total: {"id":35,"result":{}} +[2026-05-04 02:10:10.114] [info] [webhooks.cpp:170] [1934] return total: {"id":36,"result":{}} +[2026-05-04 02:10:10.442] [info] [webhooks.cpp:170] [1934] return total: {"id":37,"result":{}} +[2026-05-04 02:10:10.751] [info] [webhooks.cpp:170] [1934] return total: {"id":38,"result":{}} +[2026-05-04 02:10:10.994] [info] [webhooks.cpp:170] [1934] return total: {"id":39,"result":{}} +[2026-05-04 02:10:11.233] [info] [webhooks.cpp:170] [1934] return total: {"id":40,"result":{}} +[2026-05-04 02:10:11.486] [info] [webhooks.cpp:170] [1934] return total: {"id":41,"result":{}} +[2026-05-04 02:10:11.717] [info] [webhooks.cpp:170] [1934] return total: {"id":42,"result":{}} +[2026-05-04 02:10:12.003] [info] [webhooks.cpp:170] [1934] return total: {"id":43,"result":{}} +[2026-05-04 02:10:12.251] [info] [webhooks.cpp:170] [1934] return total: {"id":44,"result":{}} +[2026-05-04 02:10:13.811] [info] [z_compensation.cpp:285] [1934] ZCompensation z_adjust_mm -0.013475307891500162 +[2026-05-04 02:10:13.814] [info] [webhooks.cpp:170] [1934] return total: {"id":45,"result":{}} +[2026-05-04 02:10:14.056] [info] [webhooks.cpp:170] [1934] return total: {"id":46,"result":{}} +[2026-05-04 02:10:14.321] [info] [webhooks.cpp:170] [1934] return total: {"id":47,"result":{}} +[2026-05-04 02:10:14.549] [info] [webhooks.cpp:170] [1934] return total: {"id":48,"result":{}} +[2026-05-04 02:10:14.741] [info] [webhooks.cpp:170] [1934] return total: {"id":49,"result":{}} +[2026-05-04 02:10:14.942] [info] [webhooks.cpp:170] [1934] return total: {"id":50,"result":{}} +[2026-05-04 02:10:15.171] [info] [webhooks.cpp:170] [1934] return total: {"id":51,"result":{}} +[2026-05-04 02:10:15.395] [info] [webhooks.cpp:170] [1934] return total: {"id":52,"result":{}} +[2026-05-04 02:10:15.600] [info] [webhooks.cpp:170] [1934] return total: {"id":53,"result":{}} +[2026-05-04 02:10:15.805] [info] [webhooks.cpp:170] [1934] return total: {"id":54,"result":{}} +[2026-05-04 02:10:16.025] [info] [webhooks.cpp:170] [1934] return total: {"id":55,"result":{}} +[2026-05-04 02:10:16.213] [info] [webhooks.cpp:170] [1934] return total: {"id":56,"result":{}} +[2026-05-04 02:10:16.435] [info] [webhooks.cpp:170] [1934] return total: {"id":57,"result":{}} +[2026-05-04 02:10:16.620] [info] [webhooks.cpp:170] [1934] return total: {"id":58,"result":{}} +[2026-05-04 02:10:16.794] [info] [webhooks.cpp:170] [1934] return total: {"id":59,"result":{}} +[2026-05-04 02:10:16.977] [info] [webhooks.cpp:170] [1934] return total: {"id":60,"result":{}} +[2026-05-04 02:10:17.164] [info] [webhooks.cpp:170] [1934] return total: {"id":61,"result":{}} +[2026-05-04 02:10:17.370] [info] [webhooks.cpp:170] [1934] return total: {"id":62,"result":{}} +[2026-05-04 02:10:18.742] [info] [webhooks.cpp:170] [1934] return total: {"id":63,"result":{}} +[2026-05-04 02:10:19.133] [info] [z_compensation.cpp:285] [1934] ZCompensation z_adjust_mm -0.016013370274665407 +[2026-05-04 02:10:19.136] [info] [webhooks.cpp:170] [1934] return total: {"id":64,"result":{}} +[2026-05-04 02:10:19.421] [info] [webhooks.cpp:170] [1934] return total: {"id":65,"result":{}} +[2026-05-04 02:10:22.507] [info] [clocksync.cpp:206] [1986] mcu 'mcu': New minimum RTT: sent_time=135.749394939,half_rtt=7.139599999561597e-05,freq=24000084.82719299 +[2026-05-04 02:10:28.303] [info] [z_compensation.cpp:285] [1934] ZCompensation z_adjust_mm -0.019216480604697043 +[2026-05-04 02:10:28.305] [info] [webhooks.cpp:170] [1934] return total: {"id":66,"result":{}} +[2026-05-04 02:10:28.873] [info] [webhooks.cpp:170] [1934] return total: {"id":67,"result":{}} +[2026-05-04 02:10:29.213] [info] [webhooks.cpp:170] [1934] return total: {"id":68,"result":{}} +[2026-05-04 02:10:29.580] [info] [webhooks.cpp:170] [1934] return total: {"id":69,"result":{}} +[2026-05-04 02:10:30.060] [info] [webhooks.cpp:170] [1934] return total: {"id":70,"result":{}} +[2026-05-04 02:10:30.898] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:120.27800000037998,last_temp:23.4283963325708,temp:23.4283963325708,target_temp:0,smoothed_temp:23.452540437922405 +[2026-05-04 02:10:31.088] [info] [webhooks.cpp:170] [1934] return total: {"id":71,"result":{}} +[2026-05-04 02:10:31.485] [info] [webhooks.cpp:170] [1934] return total: {"id":72,"result":{}} +[2026-05-04 02:10:31.725] [info] [webhooks.cpp:170] [1934] return total: {"id":73,"result":{}} +[2026-05-04 02:10:32.006] [info] [webhooks.cpp:170] [1934] return total: {"id":74,"result":{}} +[2026-05-04 02:10:32.237] [info] [webhooks.cpp:170] [1934] return total: {"id":75,"result":{}} +[2026-05-04 02:10:32.484] [info] [webhooks.cpp:170] [1934] return total: {"id":76,"result":{}} +[2026-05-04 02:10:32.768] [info] [webhooks.cpp:170] [1934] return total: {"id":77,"result":{}} +[2026-05-04 02:10:32.990] [info] [webhooks.cpp:170] [1934] return total: {"id":78,"result":{}} +[2026-05-04 02:10:33.265] [info] [webhooks.cpp:170] [1934] return total: {"id":79,"result":{}} +[2026-05-04 02:10:33.527] [info] [webhooks.cpp:170] [1934] return total: {"id":80,"result":{}} +[2026-05-04 02:10:33.738] [info] [webhooks.cpp:170] [1934] return total: {"id":81,"result":{}} +[2026-05-04 02:10:34.138] [info] [webhooks.cpp:170] [1934] return total: {"id":82,"result":{}} +[2026-05-04 02:10:34.433] [info] [webhooks.cpp:170] [1934] return total: {"id":83,"result":{}} +[2026-05-04 02:10:34.677] [info] [webhooks.cpp:170] [1934] return total: {"id":84,"result":{}} +[2026-05-04 02:10:34.877] [info] [webhooks.cpp:170] [1934] return total: {"id":85,"result":{}} +[2026-05-04 02:10:38.038] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:127.41953538138465,last_temp:112.69721564936395,temp:112.69721564936395,target_temp:0,smoothed_temp:112.87896494819402 +[2026-05-04 02:10:45.275] [info] [z_compensation.cpp:285] [1934] ZCompensation z_adjust_mm -0.023833007125015154 +[2026-05-04 02:10:45.280] [info] [webhooks.cpp:170] [1934] return total: {"id":86,"result":{}} +[2026-05-04 02:10:45.685] [info] [webhooks.cpp:170] [1934] return total: {"id":87,"result":{}} +[2026-05-04 02:10:46.056] [info] [webhooks.cpp:170] [1934] return total: {"id":88,"result":{}} +[2026-05-04 02:10:46.325] [info] [webhooks.cpp:170] [1934] return total: {"id":89,"result":{}} +[2026-05-04 02:10:46.531] [info] [webhooks.cpp:170] [1934] return total: {"id":90,"result":{}} +[2026-05-04 02:10:46.772] [info] [webhooks.cpp:170] [1934] return total: {"id":91,"result":{}} +[2026-05-04 02:10:46.976] [info] [webhooks.cpp:170] [1934] return total: {"id":92,"result":{}} +[2026-05-04 02:10:47.174] [info] [webhooks.cpp:170] [1934] return total: {"id":93,"result":{}} +[2026-05-04 02:10:47.636] [info] [webhooks.cpp:170] [1934] return total: {"id":94,"result":{}} +[2026-05-04 02:10:47.868] [info] [webhooks.cpp:170] [1934] return total: {"id":95,"result":{}} +[2026-05-04 02:10:48.109] [info] [webhooks.cpp:170] [1934] return total: {"id":96,"result":{}} +[2026-05-04 02:10:48.335] [info] [webhooks.cpp:170] [1934] return total: {"id":97,"result":{}} +[2026-05-04 02:10:48.584] [info] [webhooks.cpp:170] [1934] return total: {"id":98,"result":{}} +[2026-05-04 02:10:48.770] [info] [webhooks.cpp:170] [1934] return total: {"id":99,"result":{}} +[2026-05-04 02:10:49.015] [info] [webhooks.cpp:170] [1934] return total: {"id":100,"result":{}} +[2026-05-04 02:10:49.240] [info] [webhooks.cpp:170] [1934] return total: {"id":101,"result":{}} +[2026-05-04 02:10:49.444] [info] [webhooks.cpp:170] [1934] return total: {"id":102,"result":{}} +[2026-05-04 02:10:49.695] [info] [webhooks.cpp:170] [1934] return total: {"id":103,"result":{}} +[2026-05-04 02:10:49.907] [info] [webhooks.cpp:170] [1934] return total: {"id":104,"result":{}} +[2026-05-04 02:10:50.126] [info] [webhooks.cpp:170] [1934] return total: {"id":105,"result":{}} +[2026-05-04 02:10:50.352] [info] [webhooks.cpp:170] [1934] return total: {"id":106,"result":{}} +[2026-05-04 02:10:50.579] [info] [webhooks.cpp:170] [1934] return total: {"id":107,"result":{}} +[2026-05-04 02:10:50.823] [info] [webhooks.cpp:170] [1934] return total: {"id":108,"result":{}} +[2026-05-04 02:10:51.063] [info] [webhooks.cpp:170] [1934] return total: {"id":109,"result":{}} +[2026-05-04 02:10:51.253] [info] [webhooks.cpp:170] [1934] return total: {"id":110,"result":{}} +[2026-05-04 02:10:51.461] [info] [webhooks.cpp:170] [1934] return total: {"id":111,"result":{}} +[2026-05-04 02:10:59.406] [info] [z_compensation.cpp:285] [1934] ZCompensation z_adjust_mm -0.027142666617605685 +[2026-05-04 02:10:59.409] [info] [webhooks.cpp:170] [1934] return total: {"id":112,"result":{}} +[2026-05-04 02:10:59.585] [info] [webhooks.cpp:170] [1934] return total: {"id":113,"result":{}} +[2026-05-04 02:10:59.813] [info] [webhooks.cpp:170] [1934] return total: {"id":114,"result":{}} +[2026-05-04 02:10:59.996] [info] [webhooks.cpp:170] [1934] return total: {"id":115,"result":{}} +[2026-05-04 02:11:00.185] [info] [webhooks.cpp:170] [1934] return total: {"id":116,"result":{}} +[2026-05-04 02:11:00.409] [info] [webhooks.cpp:170] [1934] return total: {"id":117,"result":{}} +[2026-05-04 02:11:00.618] [info] [webhooks.cpp:170] [1934] return total: {"id":118,"result":{}} +[2026-05-04 02:11:00.826] [info] [webhooks.cpp:170] [1934] return total: {"id":119,"result":{}} +[2026-05-04 02:11:01.035] [info] [webhooks.cpp:170] [1934] return total: {"id":120,"result":{}} +[2026-05-04 02:11:01.249] [info] [webhooks.cpp:170] [1934] return total: {"id":121,"result":{}} +[2026-05-04 02:11:01.453] [info] [webhooks.cpp:170] [1934] return total: {"id":122,"result":{}} +[2026-05-04 02:11:02.415] [info] [webhooks.cpp:170] [1934] return total: {"id":123,"result":{}} +[2026-05-04 02:11:02.634] [info] [webhooks.cpp:170] [1934] return total: {"id":124,"result":{}} +[2026-05-04 02:11:02.792] [info] [webhooks.cpp:170] [1934] return total: {"id":125,"result":{}} +[2026-05-04 02:11:02.998] [info] [webhooks.cpp:170] [1934] return total: {"id":126,"result":{}} +[2026-05-04 02:11:03.206] [info] [webhooks.cpp:170] [1934] return total: {"id":127,"result":{}} +[2026-05-04 02:11:03.389] [info] [webhooks.cpp:170] [1934] return total: {"id":128,"result":{}} +[2026-05-04 02:11:03.617] [info] [webhooks.cpp:170] [1934] return total: {"id":129,"result":{}} +[2026-05-04 02:11:03.818] [info] [webhooks.cpp:170] [1934] return total: {"id":130,"result":{}} +[2026-05-04 02:11:04.046] [info] [webhooks.cpp:170] [1934] return total: {"id":131,"result":{}} +[2026-05-04 02:11:04.274] [info] [webhooks.cpp:170] [1934] return total: {"id":132,"result":{}} +[2026-05-04 02:11:04.513] [info] [webhooks.cpp:170] [1934] return total: {"id":133,"result":{}} +[2026-05-04 02:11:04.802] [info] [webhooks.cpp:170] [1934] return total: {"id":134,"result":{}} +[2026-05-04 02:11:05.067] [info] [webhooks.cpp:170] [1934] return total: {"id":135,"result":{}} +[2026-05-04 02:11:05.718] [info] [webhooks.cpp:170] [1934] return total: {"id":136,"result":{}} +[2026-05-04 02:11:05.873] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=179.107227626,time_avg=149.7065751294003,freq=120000027.4528468,diff=420913.9486236572(0.003507616238530477),stddev=82145.03409623342 +[2026-05-04 02:11:05.993] [info] [webhooks.cpp:170] [1934] return total: {"id":137,"result":{}} +[2026-05-04 02:11:06.218] [info] [webhooks.cpp:170] [1934] return total: {"id":138,"result":{}} +[2026-05-04 02:11:06.400] [info] [webhooks.cpp:170] [1934] return total: {"id":139,"result":{}} +[2026-05-04 02:11:06.603] [info] [webhooks.cpp:170] [1934] return total: {"id":140,"result":{}} +[2026-05-04 02:11:06.777] [info] [webhooks.cpp:170] [1934] return total: {"id":141,"result":{}} +[2026-05-04 02:11:15.887] [info] [z_compensation.cpp:285] [1934] ZCompensation z_adjust_mm 0.1038602970588235 +[2026-05-04 02:11:15.891] [info] [webhooks.cpp:170] [1934] return total: {"id":142,"result":{}} +[2026-05-04 02:11:16.297] [info] [webhooks.cpp:170] [1934] return total: {"id":143,"result":{}} +[2026-05-04 02:11:16.725] [info] [webhooks.cpp:170] [1934] return total: {"id":144,"result":{}} +[2026-05-04 02:11:17.032] [info] [webhooks.cpp:170] [1934] return total: {"id":145,"result":{}} +[2026-05-04 02:11:17.273] [info] [webhooks.cpp:170] [1934] return total: {"id":146,"result":{}} +[2026-05-04 02:11:17.482] [info] [webhooks.cpp:170] [1934] return total: {"id":147,"result":{}} +[2026-05-04 02:11:17.707] [info] [webhooks.cpp:170] [1934] return total: {"id":148,"result":{}} +[2026-05-04 02:11:17.869] [info] [webhooks.cpp:170] [1934] return total: {"id":149,"result":{}} +[2026-05-04 02:11:18.051] [info] [webhooks.cpp:170] [1934] return total: {"id":150,"result":{}} +[2026-05-04 02:11:18.237] [info] [webhooks.cpp:170] [1934] return total: {"id":151,"result":{}} +[2026-05-04 02:11:18.447] [info] [webhooks.cpp:170] [1934] return total: {"id":152,"result":{}} +[2026-05-04 02:11:18.663] [info] [webhooks.cpp:170] [1934] return total: {"id":153,"result":{}} +[2026-05-04 02:11:18.847] [info] [webhooks.cpp:170] [1934] return total: {"id":154,"result":{}} +[2026-05-04 02:11:19.071] [info] [webhooks.cpp:170] [1934] return total: {"id":155,"result":{}} +[2026-05-04 02:11:19.276] [info] [webhooks.cpp:170] [1934] return total: {"id":156,"result":{}} +[2026-05-04 02:11:19.521] [info] [webhooks.cpp:170] [1934] return total: {"id":157,"result":{}} +[2026-05-04 02:11:19.732] [info] [webhooks.cpp:170] [1934] return total: {"id":158,"result":{}} +[2026-05-04 02:11:19.932] [info] [webhooks.cpp:170] [1934] return total: {"id":159,"result":{}} +[2026-05-04 02:11:20.888] [info] [webhooks.cpp:170] [1934] return total: {"id":160,"result":{}} +[2026-05-04 02:11:21.189] [info] [webhooks.cpp:170] [1934] return total: {"id":161,"result":{}} +[2026-05-04 02:11:21.535] [info] [webhooks.cpp:170] [1934] return total: {"id":162,"result":{}} +[2026-05-04 02:11:21.948] [info] [webhooks.cpp:170] [1934] return total: {"id":163,"result":{}} +[2026-05-04 02:11:22.298] [info] [webhooks.cpp:170] [1934] return total: {"id":164,"result":{}} +[2026-05-04 02:11:22.565] [info] [webhooks.cpp:170] [1934] return total: {"id":165,"result":{}} +[2026-05-04 02:11:22.812] [info] [webhooks.cpp:170] [1934] return total: {"id":166,"result":{}} +[2026-05-04 02:11:23.058] [info] [webhooks.cpp:170] [1934] return total: {"id":167,"result":{}} +[2026-05-04 02:11:23.297] [info] [webhooks.cpp:170] [1934] return total: {"id":168,"result":{}} +[2026-05-04 02:11:23.511] [info] [webhooks.cpp:170] [1934] return total: {"id":169,"result":{}} +[2026-05-04 02:11:23.735] [info] [webhooks.cpp:170] [1934] return total: {"id":170,"result":{}} +[2026-05-04 02:11:23.955] [info] [webhooks.cpp:170] [1934] return total: {"id":171,"result":{}} +[2026-05-04 02:11:24.184] [info] [webhooks.cpp:170] [1934] return total: {"id":172,"result":{}} +[2026-05-04 02:11:24.390] [info] [webhooks.cpp:170] [1934] return total: {"id":173,"result":{}} +[2026-05-04 02:11:24.601] [info] [webhooks.cpp:170] [1934] return total: {"id":174,"result":{}} +[2026-05-04 02:11:25.032] [info] [webhooks.cpp:170] [1934] return total: {"id":175,"result":{}} +[2026-05-04 02:11:25.231] [info] [webhooks.cpp:170] [1934] return total: {"id":176,"result":{}} +[2026-05-04 02:11:31.891] [info] [webhooks.cpp:170] [1934] return total: {"id":177,"result":{}} +[2026-05-04 02:11:32.134] [info] [webhooks.cpp:170] [1934] return total: {"id":178,"result":{}} +[2026-05-04 02:11:32.376] [info] [webhooks.cpp:170] [1934] return total: {"id":179,"result":{}} +[2026-05-04 02:11:32.578] [info] [webhooks.cpp:170] [1934] return total: {"id":180,"result":{}} +[2026-05-04 02:11:32.800] [info] [webhooks.cpp:170] [1934] return total: {"id":181,"result":{}} +[2026-05-04 02:11:33.004] [info] [webhooks.cpp:170] [1934] return total: {"id":182,"result":{}} +[2026-05-04 02:11:33.190] [info] [webhooks.cpp:170] [1934] return total: {"id":183,"result":{}} +[2026-05-04 02:11:33.479] [info] [webhooks.cpp:170] [1934] return total: {"id":184,"result":{}} +[2026-05-04 02:11:34.054] [info] [webhooks.cpp:170] [1934] return total: {"id":185,"result":{}} +[2026-05-04 02:11:34.328] [info] [webhooks.cpp:170] [1934] return total: {"id":186,"result":{}} +[2026-05-04 02:11:34.644] [info] [webhooks.cpp:170] [1934] return total: {"id":187,"result":{}} +[2026-05-04 02:11:34.896] [info] [webhooks.cpp:170] [1934] return total: {"id":188,"result":{}} +[2026-05-04 02:11:35.286] [info] [webhooks.cpp:170] [1934] return total: {"id":189,"result":{}} +[2026-05-04 02:11:35.552] [info] [webhooks.cpp:170] [1934] return total: {"id":190,"result":{}} +[2026-05-04 02:11:35.867] [info] [webhooks.cpp:170] [1934] return total: {"id":191,"result":{}} +[2026-05-04 02:11:36.051] [info] [webhooks.cpp:170] [1934] return total: {"id":192,"result":{}} +[2026-05-04 02:11:36.242] [info] [webhooks.cpp:170] [1934] return total: {"id":193,"result":{}} +[2026-05-04 02:11:36.879] [info] [webhooks.cpp:170] [1934] return total: {"id":194,"result":{}} +[2026-05-04 02:11:37.219] [info] [webhooks.cpp:170] [1934] return total: {"id":195,"result":{}} +[2026-05-04 02:11:37.470] [info] [webhooks.cpp:170] [1934] return total: {"id":196,"result":{}} +[2026-05-04 02:11:37.655] [info] [webhooks.cpp:170] [1934] return total: {"id":197,"result":{}} +[2026-05-04 02:11:37.836] [info] [webhooks.cpp:170] [1934] return total: {"id":198,"result":{}} +[2026-05-04 02:11:50.530] [info] [device_status.cpp:1674] [1934] Device status change to: 10, last status: 1 +[2026-05-04 02:11:50.537] [info] [homing_override.cpp:238] [1934] need true false false homed true true true +[2026-05-04 02:11:50.551] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"2801"} +[2026-05-04 02:11:50.552] [info] [homing_override.cpp:261] [1934] cmd_G28 cur_temp:87.04319041965307,safe_home_temp:140 +[2026-05-04 02:11:50.553] [info] [device_status.cpp:989] [1945] M2202 result_code:2801 +[2026-05-04 02:11:50.565] [info] [extruder.cpp:493] [1934] cmd_M104 temp 140 index -1 wait true +[2026-05-04 02:11:50.566] [info] [verify_heater.cpp:67] [1934] verify_heater:reset_fault heater_name extruder +[2026-05-04 02:11:50.568] [info] [verify_heater.cpp:67] [1934] verify_heater:reset_fault heater_name extruder +[2026-05-04 02:11:50.569] [info] [heaters.cpp:319] [1934] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-04 02:11:50.571] [info] [heaters.cpp:1104] [1934] __func__:set_temperature,temp:140,wait:true +[2026-05-04 02:11:50.573] [info] [toolhead.cpp:904] [1934] get_last_move_time +[2026-05-04 02:11:50.589] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1045"} +[2026-05-04 02:11:50.590] [info] [device_status.cpp:989] [1945] M2202 result_code:1045 +[2026-05-04 02:11:51.166] [info] [verify_heater.cpp:164] [1934] Heater extruder approaching new target of 140 +[2026-05-04 02:12:02.178] [info] [verify_heater.cpp:140] [1934] Heater extruder within range of 140 +[2026-05-04 02:12:08.593] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-04 02:12:08.594] [info] [heaters.cpp:1236] [1934] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-04 02:12:08.594] [info] [device_status.cpp:989] [1945] M2202 result_code:1066 +[2026-05-04 02:12:08.594] [info] [homing_override.cpp:166] [1934] homing_ready axis z +[2026-05-04 02:12:08.861] [info] [homing_override.cpp:175] [1934] homing_ready #2: endstop name z state false +[2026-05-04 02:12:09.196] [info] [gcode.cpp:598] [1934] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-04 02:12:09.510] [info] [gcode.cpp:598] [1934] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-04 02:12:09.514] [info] [gcode_move.cpp:638] [1934] cmd_M114 X:56.500 Y:244.000 Z:17.967 E:0.000 +[2026-05-04 02:12:09.517] [info] [stepper.cpp:573] [1934] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:12:09.520] [info] [z_compensation.cpp:285] [1934] ZCompensation z_adjust_mm 0.002809018045415437 +[2026-05-04 02:12:09.702] [info] [homing.cpp:152] [1934] kin_spos name stepper_x command_position 629.75 +[2026-05-04 02:12:09.704] [info] [homing.cpp:152] [1934] kin_spos name stepper_y command_position 141.75 +[2026-05-04 02:12:09.704] [info] [homing.cpp:152] [1934] kin_spos name stepper_z command_position 18.11018552703658 +[2026-05-04 02:12:11.066] [info] [mcu.cpp:390] [1986] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 02:12:11.160] [warning] [tmc.cpp:887] [1934] Stepper stepper_y phase change (was -60 now 4) +[2026-05-04 02:12:11.169] [info] [mcu.cpp:634] [1934] home_wait pin_value:1 next_clock:5290651260 +[2026-05-04 02:12:11.172] [info] [homing.cpp:266] [1934] endstop_name x tt 220.44359483333332 trigger_time 220.44359483333332 move_end_print_time 220.71425225 +[2026-05-04 02:12:11.175] [info] [homing.cpp:266] [1934] endstop_name x tt 220.44359483333332 trigger_time 220.44359483333332 move_end_print_time 220.71425225 +[2026-05-04 02:12:11.176] [info] [homing.cpp:309] [1934] stepper_name stepper_x over_steps 0 halt_pos -933 start_pos 4197 trig_pos -933 +[2026-05-04 02:12:11.178] [info] [homing.cpp:309] [1934] stepper_name stepper_y over_steps 0 halt_pos -1502 start_pos 3628 trig_pos -1502 +[2026-05-04 02:12:11.261] [info] [stepper.cpp:573] [1934] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:12:11.770] [info] [gcode_move.cpp:638] [1934] cmd_M114 X:8.000 Y:244.000 Z:18.148 E:0.000 +[2026-05-04 02:12:11.774] [info] [gcode_move.cpp:638] [1934] cmd_M114 X:8.000 Y:244.000 Z:18.148 E:0.000 +[2026-05-04 02:12:11.777] [info] [stepper.cpp:573] [1934] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:12:11.853] [info] [homing.cpp:152] [1934] kin_spos name stepper_x command_position 629.75 +[2026-05-04 02:12:11.854] [info] [homing.cpp:152] [1934] kin_spos name stepper_y command_position 141.75 +[2026-05-04 02:12:11.856] [info] [homing.cpp:152] [1934] kin_spos name stepper_z command_position 18.11018552703658 +[2026-05-04 02:12:12.331] [info] [mcu.cpp:390] [1986] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 02:12:12.405] [info] [mcu.cpp:634] [1934] home_wait pin_value:1 next_clock:5320980784 +[2026-05-04 02:12:12.407] [info] [homing.cpp:266] [1934] endstop_name x tt 221.70732504166668 trigger_time 221.70732504166668 move_end_print_time 221.97211695833334 +[2026-05-04 02:12:12.409] [info] [homing.cpp:266] [1934] endstop_name x tt 221.70732504166668 trigger_time 221.70732504166668 move_end_print_time 221.97211695833334 +[2026-05-04 02:12:12.411] [info] [homing.cpp:309] [1934] stepper_name stepper_x over_steps 0 halt_pos -933 start_pos -130 trig_pos -933 +[2026-05-04 02:12:12.411] [info] [homing.cpp:309] [1934] stepper_name stepper_y over_steps 0 halt_pos -1502 start_pos -699 trig_pos -1502 +[2026-05-04 02:12:12.538] [info] [stepper.cpp:573] [1934] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:12:12.540] [info] [gcode_move.cpp:638] [1934] cmd_M114 X:8.000 Y:244.000 Z:18.148 E:0.000 +[2026-05-04 02:12:13.015] [info] [gcode.cpp:598] [1934] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-04 02:12:13.312] [info] [gcode.cpp:598] [1934] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-04 02:12:13.327] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"2802"} +[2026-05-04 02:12:13.327] [info] [device_status.cpp:989] [1945] M2202 result_code:2802 +[2026-05-04 02:12:13.329] [info] [device_status.cpp:1674] [1934] Device status change to: 1, last status: 10 +[2026-05-04 02:12:13.349] [info] [webhooks.cpp:170] [1934] return total: {"id":199,"result":{}} +[2026-05-04 02:12:13.355] [info] [extruder.cpp:493] [1934] cmd_M104 temp 0 index -1 wait false +[2026-05-04 02:12:13.355] [info] [heaters.cpp:1104] [1934] __func__:set_temperature,temp:0,wait:false +[2026-05-04 02:12:13.357] [info] [toolhead.cpp:904] [1934] get_last_move_time +[2026-05-04 02:12:13.361] [info] [webhooks.cpp:170] [1934] return total: {"id":200,"result":{}} +[2026-05-04 02:12:24.680] [info] [device_status.cpp:1674] [1934] Device status change to: 10, last status: 1 +[2026-05-04 02:12:24.686] [info] [homing_override.cpp:238] [1934] need false true false homed true true true +[2026-05-04 02:12:24.699] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"2801"} +[2026-05-04 02:12:24.701] [info] [device_status.cpp:989] [1945] M2202 result_code:2801 +[2026-05-04 02:12:24.701] [info] [homing_override.cpp:261] [1934] cmd_G28 cur_temp:136.3474911251387,safe_home_temp:140 +[2026-05-04 02:12:24.712] [info] [extruder.cpp:493] [1934] cmd_M104 temp 140 index -1 wait true +[2026-05-04 02:12:24.713] [info] [verify_heater.cpp:67] [1934] verify_heater:reset_fault heater_name extruder +[2026-05-04 02:12:24.714] [info] [verify_heater.cpp:67] [1934] verify_heater:reset_fault heater_name extruder +[2026-05-04 02:12:24.715] [info] [heaters.cpp:319] [1934] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-04 02:12:24.716] [info] [heaters.cpp:1104] [1934] __func__:set_temperature,temp:140,wait:true +[2026-05-04 02:12:24.718] [info] [toolhead.cpp:904] [1934] get_last_move_time +[2026-05-04 02:12:24.757] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=257.975894497,time_avg=228.37267817688056,freq=24000057.72780754,diff=168432.6889104843(0.0070180287046035135),stddev=15415.721772389355 +[2026-05-04 02:12:24.773] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=258.002150039,time_avg=228.39992706004267,freq=119998586.02357964,diff=266923.6203918457(0.002224363503265381),stddev=44368.84460131103 +[2026-05-04 02:12:24.792] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1045"} +[2026-05-04 02:12:24.795] [info] [device_status.cpp:989] [1945] M2202 result_code:1045 +[2026-05-04 02:12:26.725] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-04 02:12:26.725] [info] [heaters.cpp:1236] [1934] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-04 02:12:26.726] [info] [device_status.cpp:989] [1945] M2202 result_code:1066 +[2026-05-04 02:12:26.726] [info] [homing_override.cpp:166] [1934] homing_ready axis z +[2026-05-04 02:12:26.985] [info] [homing_override.cpp:175] [1934] homing_ready #2: endstop name z state false +[2026-05-04 02:12:27.294] [info] [gcode.cpp:598] [1934] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-04 02:12:27.612] [info] [gcode.cpp:598] [1934] Run Current:0.928078 A Hold Current: 0.795495A +[2026-05-04 02:12:27.616] [info] [gcode_move.cpp:638] [1934] cmd_M114 X:8.000 Y:244.000 Z:18.148 E:0.000 +[2026-05-04 02:12:27.619] [info] [stepper.cpp:573] [1934] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:12:27.621] [info] [z_compensation.cpp:285] [1934] ZCompensation z_adjust_mm -0.0020357529225843874 +[2026-05-04 02:12:27.721] [info] [homing.cpp:152] [1934] kin_spos name stepper_x command_position 414 +[2026-05-04 02:12:27.722] [info] [homing.cpp:152] [1934] kin_spos name stepper_y command_position -398 +[2026-05-04 02:12:27.722] [info] [homing.cpp:152] [1934] kin_spos name stepper_z command_position 18.11018552703658 +[2026-05-04 02:12:30.899] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:240.27800000038,last_temp:23.530910672484367,temp:23.530910672484367,target_temp:0,smoothed_temp:23.537009521563817 +[2026-05-04 02:12:32.034] [info] [mcu.cpp:390] [1986] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 02:12:32.076] [warning] [tmc.cpp:887] [1934] Stepper stepper_y phase change (was 4 now -60) +[2026-05-04 02:12:32.113] [info] [mcu.cpp:634] [1934] home_wait pin_value:1 next_clock:5793877826 +[2026-05-04 02:12:32.116] [info] [homing.cpp:266] [1934] endstop_name y tt 241.41136841666668 trigger_time 241.41136841666668 move_end_print_time 241.67183158333333 +[2026-05-04 02:12:32.116] [info] [homing.cpp:266] [1934] endstop_name y tt 241.41136841666668 trigger_time 241.41136841666668 move_end_print_time 241.67183158333333 +[2026-05-04 02:12:32.117] [info] [homing.cpp:309] [1934] stepper_name stepper_y over_steps 0 halt_pos 18645 start_pos -699 trig_pos 18645 +[2026-05-04 02:12:32.117] [info] [homing.cpp:309] [1934] stepper_name stepper_x over_steps 0 halt_pos -19474 start_pos -130 trig_pos -19474 +[2026-05-04 02:12:32.119] [info] [z_compensation.cpp:285] [1934] ZCompensation z_adjust_mm 0.0037097027248527625 +[2026-05-04 02:12:32.186] [info] [stepper.cpp:573] [1934] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:12:32.697] [info] [gcode_move.cpp:638] [1934] cmd_M114 X:8.000 Y:8.000 Z:17.984 E:0.000 +[2026-05-04 02:12:32.700] [info] [gcode_move.cpp:638] [1934] cmd_M114 X:8.000 Y:8.000 Z:17.984 E:0.000 +[2026-05-04 02:12:32.703] [info] [stepper.cpp:573] [1934] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:12:32.781] [info] [homing.cpp:152] [1934] kin_spos name stepper_x command_position 414 +[2026-05-04 02:12:32.782] [info] [homing.cpp:152] [1934] kin_spos name stepper_y command_position -398 +[2026-05-04 02:12:32.782] [info] [homing.cpp:152] [1934] kin_spos name stepper_z command_position 18.11018552703658 +[2026-05-04 02:12:33.243] [info] [mcu.cpp:390] [1986] handle_trsync_state #1 reason:1 is_failure:false +[2026-05-04 02:12:33.353] [info] [mcu.cpp:634] [1934] home_wait pin_value:1 next_clock:5822908250 +[2026-05-04 02:12:33.355] [info] [homing.cpp:266] [1934] endstop_name y tt 242.62096945833332 trigger_time 242.62096945833332 move_end_print_time 242.88187925 +[2026-05-04 02:12:33.356] [info] [homing.cpp:266] [1934] endstop_name y tt 242.62096945833332 trigger_time 242.62096945833332 move_end_print_time 242.88187925 +[2026-05-04 02:12:33.358] [info] [homing.cpp:309] [1934] stepper_name stepper_y over_steps 0 halt_pos 18645 start_pos 17842 trig_pos 18645 +[2026-05-04 02:12:33.359] [info] [homing.cpp:309] [1934] stepper_name stepper_x over_steps 0 halt_pos -19474 start_pos -18671 trig_pos -19474 +[2026-05-04 02:12:33.456] [info] [stepper.cpp:573] [1934] set_homing_speed homing_speed 60 speed 60 +[2026-05-04 02:12:33.457] [info] [gcode_move.cpp:638] [1934] cmd_M114 X:8.000 Y:8.000 Z:17.984 E:0.000 +[2026-05-04 02:12:33.961] [info] [gcode.cpp:598] [1934] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-04 02:12:34.284] [info] [gcode.cpp:598] [1934] Run Current:1.178511 A Hold Current: 0.824958A +[2026-05-04 02:12:34.288] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"2802"} +[2026-05-04 02:12:34.289] [info] [device_status.cpp:1674] [1934] Device status change to: 1, last status: 10 +[2026-05-04 02:12:34.294] [info] [device_status.cpp:989] [1945] M2202 result_code:2802 +[2026-05-04 02:12:34.297] [info] [webhooks.cpp:170] [1934] return total: {"id":201,"result":{}} +[2026-05-04 02:12:34.302] [info] [extruder.cpp:493] [1934] cmd_M104 temp 0 index -1 wait false +[2026-05-04 02:12:34.303] [info] [heaters.cpp:1104] [1934] __func__:set_temperature,temp:0,wait:false +[2026-05-04 02:12:34.304] [info] [toolhead.cpp:904] [1934] get_last_move_time +[2026-05-04 02:12:34.306] [info] [webhooks.cpp:170] [1934] return total: {"id":202,"result":{}} +[2026-05-04 02:12:38.041] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:247.4208789287178,last_temp:142.4361624058518,temp:142.4361624058518,target_temp:0,smoothed_temp:142.78758467736625 +[2026-05-04 02:14:31.397] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:360.77800000037996,last_temp:23.62806644723878,temp:23.62806644723878,target_temp:0,smoothed_temp:23.613498882477224 +[2026-05-04 02:14:32.711] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=385.95144289200005,time_avg=356.40334017637133,freq=119998342.3875017,diff=96718.03652191162(0.0008059836376825969),stddev=15924.091696112446 +[2026-05-04 02:14:38.042] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:367.42223466715416,last_temp:88.9117842153205,temp:88.9117842153205,target_temp:0,smoothed_temp:89.06169460030314 +[2026-05-04 02:15:03.246] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:15:04.483] [info] [servo.cpp:272] [1934] CMD_set_cavity_temperature_mode mode:1 +[2026-05-04 02:15:04.484] [info] [cavity_fan.cpp:453] [1934] set cavity fan: 0 +[2026-05-04 02:15:04.485] [info] [servo.cpp:266] [1934] start grille close check. +[2026-05-04 02:15:04.485] [info] [webhooks.cpp:170] [1934] return total: {"id":203,"result":{}} +[2026-05-04 02:15:05.985] [info] [servo.cpp:200] [1934] servo away from home! +[2026-05-04 02:15:14.813] [info] [extruder.cpp:493] [1934] cmd_M104 temp 0 index -1 wait false +[2026-05-04 02:15:14.813] [info] [heaters.cpp:1104] [1934] __func__:set_temperature,temp:0,wait:false +[2026-05-04 02:15:14.813] [info] [toolhead.cpp:904] [1934] get_last_move_time +[2026-05-04 02:15:14.814] [info] [webhooks.cpp:170] [1934] return total: {"id":204,"result":{}} +[2026-05-04 02:16:31.897] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:481.27800000037996,last_temp:23.63317365772076,temp:23.63317365772076,target_temp:0,smoothed_temp:23.650471566041464 +[2026-05-04 02:16:38.043] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:487.4236592902389,last_temp:61.82196418287805,temp:61.82196418287805,target_temp:0,smoothed_temp:61.840413557668626 +[2026-05-04 02:17:20.103] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:17:54.547] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:18:13.746] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:18:13.747] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:18:13.748] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:18:13.748] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:18:13.750] [info] [z_compensation.cpp:285] [1934] ZCompensation z_adjust_mm 0.1038602970588235 +[2026-05-04 02:18:13.751] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:18:13.751] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:18:13.752] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:18:13.753] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:18:13.754] [info] [webhooks.cpp:170] [1934] return total: {"id":205,"result":{}} +[2026-05-04 02:18:13.852] [info] [mcu.cpp:712] [1934] set_digital pin PB7 583.4831411666667 607.094938081 +[2026-05-04 02:18:14.000] [error] [tmc.cpp:359] [1934] TMC extruder reports GSTAT: 10000000 reset=1(Reset) +[2026-05-04 02:18:15.971] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:18:15.972] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:18:15.973] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:18:15.973] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:18:15.975] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:18:15.976] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:18:15.976] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:18:15.977] [info] [webhooks.cpp:170] [1934] return total: {"id":206,"result":{}} +[2026-05-04 02:18:15.978] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:18:16.503] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:18:16.505] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:18:16.506] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:18:16.506] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:18:16.507] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:18:16.508] [info] [webhooks.cpp:170] [1934] return total: {"id":207,"result":{}} +[2026-05-04 02:18:16.509] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:18:16.509] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:18:16.510] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:18:17.191] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:18:17.222] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:18:17.224] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:18:17.225] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:18:17.225] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:18:17.227] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:18:17.227] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:18:17.228] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:18:17.228] [info] [webhooks.cpp:170] [1934] return total: {"id":208,"result":{}} +[2026-05-04 02:18:17.228] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:18:20.767] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:18:20.768] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:18:20.769] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:18:20.769] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:18:20.772] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:18:20.772] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:18:20.772] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:18:20.773] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:18:20.774] [info] [webhooks.cpp:170] [1934] return total: {"id":209,"result":{}} +[2026-05-04 02:18:22.485] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:18:22.487] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:18:22.487] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:18:22.487] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:18:22.490] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:18:22.490] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:18:22.490] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:18:22.491] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:18:22.492] [info] [webhooks.cpp:170] [1934] return total: {"id":210,"result":{}} +[2026-05-04 02:18:23.107] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:18:23.109] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:18:23.109] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:18:23.109] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:18:23.112] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:18:23.113] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:18:23.113] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:18:23.113] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:18:23.115] [info] [webhooks.cpp:170] [1934] return total: {"id":211,"result":{}} +[2026-05-04 02:18:23.684] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:18:23.685] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:18:23.686] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:18:23.686] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:18:26.333] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:18:26.334] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:18:26.334] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:18:26.335] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:18:26.335] [info] [webhooks.cpp:170] [1934] return total: {"id":212,"result":{}} +[2026-05-04 02:18:26.339] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:18:26.341] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:18:26.342] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:18:26.342] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:18:26.345] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:18:26.345] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:18:26.345] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:18:26.346] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:18:26.348] [info] [webhooks.cpp:170] [1934] return total: {"id":213,"result":{}} +[2026-05-04 02:18:32.397] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:601.77800000038,last_temp:23.750467942753062,temp:23.750467942753062,target_temp:0,smoothed_temp:23.740853913442287 +[2026-05-04 02:18:37.250] [info] [device_status.cpp:1674] [1934] Device status change to: 3, last status: 1 +[2026-05-04 02:18:37.252] [info] [mmu.cpp:3953] [1934] Execute filament feeding into the extruder head. channel 0 +[2026-05-04 02:18:37.253] [info] [mmu.cpp:2093] [1934] {"command":"CANVAS_FEEDING_FILA_REQUEST","result":"0"} +[2026-05-04 02:18:37.254] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"CANVAS_FEEDING_FILA_REQUEST","result":"0"} +[2026-05-04 02:18:37.255] [info] [mmu.cpp:2093] [1934] {"command":"M2202","result":"1150"} +[2026-05-04 02:18:37.255] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1150"} +[2026-05-04 02:18:37.255] [info] [device_status.cpp:989] [1945] M2202 result_code:1150 +[2026-05-04 02:18:37.257] [info] [mmu.cpp:2093] [1934] {"command":"M2202","result":"1151"} +[2026-05-04 02:18:37.257] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1151"} +[2026-05-04 02:18:37.257] [info] [device_status.cpp:989] [1945] M2202 result_code:1151 +[2026-05-04 02:18:37.259] [info] [mmu.cpp:4195] [1934] Move to waste box +[2026-05-04 02:18:37.260] [info] [homing_override.cpp:238] [1934] need true true false homed true true true +[2026-05-04 02:18:37.261] [info] [gcode_move.cpp:52] [1934] G180 select 800 +[2026-05-04 02:18:37.262] [info] [gcode.cpp:1006] [1934] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=47.359095492039586 +[2026-05-04 02:18:37.262] [info] [gcode.cpp:1102] [1934] cmd_SET_CONDITION is_ingore = false +[2026-05-04 02:18:37.263] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1045"} +[2026-05-04 02:18:37.263] [info] [device_status.cpp:989] [1945] M2202 result_code:1045 +[2026-05-04 02:18:37.264] [info] [extruder.cpp:493] [1934] cmd_M104 temp 140 index -1 wait true +[2026-05-04 02:18:37.264] [info] [verify_heater.cpp:67] [1934] verify_heater:reset_fault heater_name extruder +[2026-05-04 02:18:37.264] [info] [verify_heater.cpp:67] [1934] verify_heater:reset_fault heater_name extruder +[2026-05-04 02:18:37.264] [info] [heaters.cpp:319] [1934] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-04 02:18:37.264] [info] [heaters.cpp:1104] [1934] __func__:set_temperature,temp:140,wait:true +[2026-05-04 02:18:37.264] [info] [toolhead.cpp:904] [1934] get_last_move_time +[2026-05-04 02:18:37.442] [info] [verify_heater.cpp:164] [1934] Heater extruder approaching new target of 140 +[2026-05-04 02:18:38.044] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:607.4250747577033,last_temp:47.446004260820246,temp:47.446004260820246,target_temp:140,smoothed_temp:47.39426968483983 +[2026-05-04 02:18:55.454] [info] [verify_heater.cpp:140] [1934] Heater extruder within range of 140 +[2026-05-04 02:18:58.277] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-04 02:18:58.277] [info] [device_status.cpp:989] [1945] M2202 result_code:1066 +[2026-05-04 02:18:58.277] [info] [heaters.cpp:1236] [1934] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 140 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-04 02:18:58.278] [info] [gcode.cpp:1123] [1934] cmd_SET_CONDITION_END is_ingore = false +[2026-05-04 02:18:58.279] [info] [z_compensation.cpp:285] [1934] ZCompensation z_adjust_mm -0.0003453895521687723 +[2026-05-04 02:18:58.285] [info] [mmu.cpp:4199] [1934] temp 139.58882196170384 pre_set_temp 230 +[2026-05-04 02:18:58.286] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1045"} +[2026-05-04 02:18:58.286] [info] [device_status.cpp:989] [1945] M2202 result_code:1045 +[2026-05-04 02:18:58.286] [info] [extruder.cpp:493] [1934] cmd_M104 temp 230 index -1 wait true +[2026-05-04 02:18:58.286] [info] [verify_heater.cpp:67] [1934] verify_heater:reset_fault heater_name extruder +[2026-05-04 02:18:58.286] [info] [verify_heater.cpp:67] [1934] verify_heater:reset_fault heater_name extruder +[2026-05-04 02:18:58.286] [info] [heaters.cpp:319] [1934] verify_heater:normal heater_name:extruder is_verify_heater_fault false +[2026-05-04 02:18:58.287] [info] [heaters.cpp:1104] [1934] __func__:set_temperature,temp:230,wait:true +[2026-05-04 02:18:58.457] [info] [verify_heater.cpp:164] [1934] Heater extruder approaching new target of 230 +[2026-05-04 02:19:25.469] [info] [verify_heater.cpp:140] [1934] Heater extruder within range of 230 +[2026-05-04 02:19:29.304] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1066"} +[2026-05-04 02:19:29.304] [info] [device_status.cpp:989] [1945] M2202 result_code:1066 +[2026-05-04 02:19:29.304] [info] [heaters.cpp:1236] [1934] wait_for_temperature is_wait_for_temperature false print_stop false target_temp 230 is_adc_temp_fault false is_verify_heater_fault false +[2026-05-04 02:19:29.305] [info] [mmu.cpp:2093] [1934] {"command":"M2202","result":"1152"} +[2026-05-04 02:19:29.306] [info] [mmu.cpp:2520] [1934] start extrude channel check. +[2026-05-04 02:19:29.307] [info] [homing_override.cpp:238] [1934] need true true false homed true true true +[2026-05-04 02:19:29.308] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1152"} +[2026-05-04 02:19:29.308] [info] [device_status.cpp:989] [1945] M2202 result_code:1152 +[2026-05-04 02:19:29.308] [info] [gcode_move.cpp:52] [1934] G180 select 800 +[2026-05-04 02:19:29.309] [info] [gcode.cpp:1006] [1934] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=231.3777842622442 +[2026-05-04 02:19:29.309] [info] [gcode.cpp:1102] [1934] cmd_SET_CONDITION is_ingore = true +[2026-05-04 02:19:29.309] [info] [gcode.cpp:1123] [1934] cmd_SET_CONDITION_END is_ingore = false +[2026-05-04 02:19:29.311] [info] [z_compensation.cpp:285] [1934] ZCompensation z_adjust_mm 0.06511438819182201 +[2026-05-04 02:19:29.313] [info] [gcode_move.cpp:52] [1934] G180 select 812 +[2026-05-04 02:19:39.512] [info] [toolhead.cpp:904] [1934] get_last_move_time +[2026-05-04 02:19:42.776] [info] [gcode_move.cpp:52] [1934] G180 select 818 +[2026-05-04 02:19:42.781] [info] [mmu.cpp:2560] [1934] step 1 : distance 0 +[2026-05-04 02:19:42.781] [info] [mmu.cpp:2560] [1934] step 1 : distance 0 +[2026-05-04 02:19:42.781] [info] [mmu.cpp:2560] [1934] step 1 : distance 0 +[2026-05-04 02:19:42.781] [info] [mmu.cpp:2560] [1934] step 1 : distance 0 +[2026-05-04 02:19:42.782] [info] [mmu.cpp:4319] [1934] Execute cutting action +[2026-05-04 02:19:42.782] [info] [homing_override.cpp:238] [1934] need true true false homed true true true +[2026-05-04 02:19:42.783] [info] [gcode_move.cpp:52] [1934] G180 select 813 +[2026-05-04 02:19:49.757] [info] [mmu.cpp:2093] [1934] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"1"} +[2026-05-04 02:19:49.758] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"1"} +[2026-05-04 02:19:49.773] [info] [cutting_switch_sensor.cpp:103] [1934] cutting detect state:true +[2026-05-04 02:19:50.532] [info] [gcode_move.cpp:52] [1934] G180 select 815 +[2026-05-04 02:19:51.345] [info] [gcode_move.cpp:52] [1934] G180 select 800 +[2026-05-04 02:19:51.346] [info] [gcode.cpp:1006] [1934] cmd_SET_CONDITION A=NOZZLE_TEMP, B=100, NOZZLE_TEMP=230.10836635227574 +[2026-05-04 02:19:51.346] [info] [gcode.cpp:1102] [1934] cmd_SET_CONDITION is_ingore = true +[2026-05-04 02:19:51.347] [info] [gcode.cpp:1123] [1934] cmd_SET_CONDITION_END is_ingore = false +[2026-05-04 02:19:51.778] [info] [mmu.cpp:2093] [1934] {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"0"} +[2026-05-04 02:19:51.779] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"CANVAS_CUT_KNIFT_FEEDBACK","result":"0"} +[2026-05-04 02:19:51.781] [info] [cutting_switch_sensor.cpp:103] [1934] cutting detect state:false +[2026-05-04 02:19:53.995] [info] [gcode_move.cpp:52] [1934] G180 select 816 +[2026-05-04 02:19:55.912] [info] [mmu.cpp:4511] [1934] Execute rocker arm action +[2026-05-04 02:19:56.913] [info] [mmu.cpp:4522] [1934] Execute rocker arm action complete, dir -1 channel: -1 +[2026-05-04 02:19:56.913] [info] [mmu.cpp:4350] [1934] Execute cutting action. complete +[2026-05-04 02:20:00.238] [info] [filament_switch_sensor.cpp:368] [1934] _button_handler switch_fila_det false +[2026-05-04 02:20:00.238] [info] [mmu.cpp:2093] [1934] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"0"} +[2026-05-04 02:20:00.239] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"CANVAS_FILA_DET_FEEDBACK","result":"0"} +[2026-05-04 02:20:00.241] [info] [filament_switch_sensor.cpp:247] [1934] name:filament_sensor, note_filament_present is_filament_present false filament_present false sensor_enabled 1 canvas_enabled 0 +[2026-05-04 02:20:03.065] [info] [mmu.cpp:2636] [1934] extrude channel check result: -1 +[2026-05-04 02:20:03.066] [info] [mmu.cpp:2093] [1934] {"command":"M2202","result":"1153"} +[2026-05-04 02:20:03.066] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1153"} +[2026-05-04 02:20:03.066] [info] [device_status.cpp:989] [1945] M2202 result_code:1153 +[2026-05-04 02:20:03.070] [info] [mmu.cpp:4316] [1934] Extruder head filament sensor not triggered +[2026-05-04 02:20:03.070] [info] [mmu.cpp:2093] [1934] {"command":"M2202","result":"1154"} +[2026-05-04 02:20:03.071] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1154"} +[2026-05-04 02:20:03.071] [info] [mmu.cpp:4358] [1934] Extruder head filament sensor not triggered +[2026-05-04 02:20:03.071] [info] [device_status.cpp:989] [1945] M2202 result_code:1154 +[2026-05-04 02:20:03.072] [info] [mmu.cpp:2093] [1934] {"command":"M2202","result":"1155"} +[2026-05-04 02:20:03.072] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1155"} +[2026-05-04 02:20:03.072] [info] [device_status.cpp:989] [1945] M2202 result_code:1155 +[2026-05-04 02:20:03.073] [info] [mmu.cpp:4445] [1934] Execute filament plug in process. channel: 0 +[2026-05-04 02:20:03.073] [info] [mmu.cpp:2912] [1934] exec auto refill filament start, befor_channel 0 ex_fila_status 0 canvas_status 1 +[2026-05-04 02:20:03.073] [info] [mmu.cpp:2964] [1934] exec auto refill filament over, after_channel 0 ex_fila_status 0 canvas_status 1 +[2026-05-04 02:20:03.074] [info] [mmu.cpp:2382] [1934] feed last_pos_1 channel: 0 ch_1: 91.54600992560658 ch_2: 0 ch_3: 0 ch_4: 0 +[2026-05-04 02:20:32.897] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:722.27800000038,last_temp:23.811535049579504,temp:23.811535049579504,target_temp:0,smoothed_temp:23.813480743194212 +[2026-05-04 02:20:34.542] [info] [mmu.cpp:2496] [1934] Filament loading process failed: exec retry, is_timeout: false retry: 1 +[2026-05-04 02:20:34.542] [error] [mmu.cpp:2503] [1934] Filament loading process failed: timeout. pre_pos 218.529184983706 cur_pos 262.8256413993221 channel = 0 +[2026-05-04 02:20:34.542] [info] [mmu.cpp:2509] [1934] feed cur_pos_1 channel: 0 ch_1: 262.8256413993221 ch_2: 0 ch_3: 0 ch_4: 0 +[2026-05-04 02:20:34.543] [info] [mmu.cpp:2093] [1934] {"command":"M2202","result":"1158"} +[2026-05-04 02:20:34.544] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1158"} +[2026-05-04 02:20:34.544] [info] [device_status.cpp:989] [1945] M2202 result_code:1158 +[2026-05-04 02:20:34.545] [info] [mmu.cpp:4963] [1934] set_error_code error_code 1 0 report_error_code 1242 +[2026-05-04 02:20:34.545] [info] [gcode.cpp:553] [1934] respond_ecode: , error_code: 1242 error_level 1 +[2026-05-04 02:20:34.546] [info] [webhooks.cpp:1333] [1947] update_except_status error_code: 1242 error_level: 1 +[2026-05-04 02:20:34.546] [info] [device_status.cpp:1080] [1947] Add exception code: 1242 +[2026-05-04 02:20:34.547] [info] [sql_database.cpp:97] [1947] Insert SQL: INSERT INTO exception_message (code, timestamp, level, upload_flag) VALUES (?, ?, ?, ?); +[2026-05-04 02:20:34.550] [warning] [mmu.cpp:4001] [1934] Failed to execute filament loading process, reason [error_code 803] MMUError: Filament loading process failed: timeout. +[2026-05-04 02:20:34.551] [info] [webhooks.cpp:170] [1934] return total: {"id":214,"result":{}} +[2026-05-04 02:20:34.552] [info] [filament_motion_sensor.cpp:146] [1934] CMD_encoder_sensor_switch:true +[2026-05-04 02:20:34.553] [info] [webhooks.cpp:170] [1934] return total: {"id":215,"result":{}} +[2026-05-04 02:20:34.570] [info] [device_status.cpp:1100] [1947] Save exception code: [1242] to local database +[2026-05-04 02:20:34.570] [warning] [device_status.cpp:1033] [1947] DeviceStatus::update_except_status: 1242 +[2026-05-04 02:20:34.571] [warning] [device_status.cpp:1048] [1947] Exception Status Changed: {"machine_status":{"exception_status":[1242]}} +[2026-05-04 02:20:38.045] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:727.4265252869515,last_temp:231.61522377973034,temp:231.61522377973034,target_temp:230,smoothed_temp:231.52167765731787 +[2026-05-04 02:20:52.764] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:20:52.951] [info] [webhooks.cpp:170] [1934] return total: {"id":216,"result":{}} +[2026-05-04 02:20:53.579] [info] [webhooks.cpp:170] [1934] return total: {"id":217,"result":{}} +[2026-05-04 02:20:53.905] [info] [webhooks.cpp:170] [1934] return total: {"id":218,"result":{}} +[2026-05-04 02:20:56.238] [info] [webhooks.cpp:170] [1934] return total: {"id":219,"result":{}} +[2026-05-04 02:20:56.725] [info] [webhooks.cpp:170] [1934] return total: {"id":220,"result":{}} +[2026-05-04 02:20:57.107] [info] [webhooks.cpp:170] [1934] return total: {"id":221,"result":{}} +[2026-05-04 02:20:57.431] [info] [webhooks.cpp:170] [1934] return total: {"id":222,"result":{}} +[2026-05-04 02:20:57.677] [info] [webhooks.cpp:170] [1934] return total: {"id":223,"result":{}} +[2026-05-04 02:20:57.903] [info] [webhooks.cpp:170] [1934] return total: {"id":224,"result":{}} +[2026-05-04 02:20:58.094] [info] [webhooks.cpp:170] [1934] return total: {"id":225,"result":{}} +[2026-05-04 02:20:58.267] [info] [webhooks.cpp:170] [1934] return total: {"id":226,"result":{}} +[2026-05-04 02:20:58.472] [info] [webhooks.cpp:170] [1934] return total: {"id":227,"result":{}} +[2026-05-04 02:20:58.633] [info] [webhooks.cpp:170] [1934] return total: {"id":228,"result":{}} +[2026-05-04 02:20:58.840] [info] [webhooks.cpp:170] [1934] return total: {"id":229,"result":{}} +[2026-05-04 02:20:59.024] [info] [webhooks.cpp:170] [1934] return total: {"id":230,"result":{}} +[2026-05-04 02:20:59.202] [info] [webhooks.cpp:170] [1934] return total: {"id":231,"result":{}} +[2026-05-04 02:20:59.376] [info] [webhooks.cpp:170] [1934] return total: {"id":232,"result":{}} +[2026-05-04 02:20:59.583] [info] [webhooks.cpp:170] [1934] return total: {"id":233,"result":{}} +[2026-05-04 02:20:59.785] [info] [webhooks.cpp:170] [1934] return total: {"id":234,"result":{}} +[2026-05-04 02:20:59.975] [info] [webhooks.cpp:170] [1934] return total: {"id":235,"result":{}} +[2026-05-04 02:21:00.203] [info] [webhooks.cpp:170] [1934] return total: {"id":236,"result":{}} +[2026-05-04 02:21:00.416] [info] [webhooks.cpp:170] [1934] return total: {"id":237,"result":{}} +[2026-05-04 02:21:00.645] [info] [webhooks.cpp:170] [1934] return total: {"id":238,"result":{}} +[2026-05-04 02:21:00.867] [info] [webhooks.cpp:170] [1934] return total: {"id":239,"result":{}} +[2026-05-04 02:21:01.071] [info] [webhooks.cpp:170] [1934] return total: {"id":240,"result":{}} +[2026-05-04 02:21:01.274] [info] [webhooks.cpp:170] [1934] return total: {"id":241,"result":{}} +[2026-05-04 02:21:01.491] [info] [webhooks.cpp:170] [1934] return total: {"id":242,"result":{}} +[2026-05-04 02:21:01.705] [info] [webhooks.cpp:170] [1934] return total: {"id":243,"result":{}} +[2026-05-04 02:21:01.916] [info] [webhooks.cpp:170] [1934] return total: {"id":244,"result":{}} +[2026-05-04 02:21:02.123] [info] [webhooks.cpp:170] [1934] return total: {"id":245,"result":{}} +[2026-05-04 02:21:02.326] [info] [webhooks.cpp:170] [1934] return total: {"id":246,"result":{}} +[2026-05-04 02:21:02.532] [info] [webhooks.cpp:170] [1934] return total: {"id":247,"result":{}} +[2026-05-04 02:21:02.713] [info] [webhooks.cpp:170] [1934] return total: {"id":248,"result":{}} +[2026-05-04 02:21:02.899] [info] [webhooks.cpp:170] [1934] return total: {"id":249,"result":{}} +[2026-05-04 02:21:03.104] [info] [webhooks.cpp:170] [1934] return total: {"id":250,"result":{}} +[2026-05-04 02:21:03.933] [info] [webhooks.cpp:170] [1934] return total: {"id":251,"result":{}} +[2026-05-04 02:21:04.265] [info] [webhooks.cpp:170] [1934] return total: {"id":252,"result":{}} +[2026-05-04 02:21:04.497] [info] [webhooks.cpp:170] [1934] return total: {"id":253,"result":{}} +[2026-05-04 02:21:04.732] [info] [webhooks.cpp:170] [1934] return total: {"id":254,"result":{}} +[2026-05-04 02:21:04.959] [info] [webhooks.cpp:170] [1934] return total: {"id":255,"result":{}} +[2026-05-04 02:21:05.163] [info] [webhooks.cpp:170] [1934] return total: {"id":256,"result":{}} +[2026-05-04 02:21:05.344] [info] [webhooks.cpp:170] [1934] return total: {"id":257,"result":{}} +[2026-05-04 02:21:05.570] [info] [webhooks.cpp:170] [1934] return total: {"id":258,"result":{}} +[2026-05-04 02:21:05.799] [info] [webhooks.cpp:170] [1934] return total: {"id":259,"result":{}} +[2026-05-04 02:21:06.010] [info] [webhooks.cpp:170] [1934] return total: {"id":260,"result":{}} +[2026-05-04 02:21:06.213] [info] [webhooks.cpp:170] [1934] return total: {"id":261,"result":{}} +[2026-05-04 02:21:06.420] [info] [webhooks.cpp:170] [1934] return total: {"id":262,"result":{}} +[2026-05-04 02:21:06.620] [info] [webhooks.cpp:170] [1934] return total: {"id":263,"result":{}} +[2026-05-04 02:21:06.873] [info] [webhooks.cpp:170] [1934] return total: {"id":264,"result":{}} +[2026-05-04 02:21:07.103] [info] [webhooks.cpp:170] [1934] return total: {"id":265,"result":{}} +[2026-05-04 02:21:07.323] [info] [webhooks.cpp:170] [1934] return total: {"id":266,"result":{}} +[2026-05-04 02:21:07.570] [info] [webhooks.cpp:170] [1934] return total: {"id":267,"result":{}} +[2026-05-04 02:21:07.775] [info] [webhooks.cpp:170] [1934] return total: {"id":268,"result":{}} +[2026-05-04 02:21:07.987] [info] [webhooks.cpp:170] [1934] return total: {"id":269,"result":{}} +[2026-05-04 02:21:08.194] [info] [webhooks.cpp:170] [1934] return total: {"id":270,"result":{}} +[2026-05-04 02:21:08.418] [info] [webhooks.cpp:170] [1934] return total: {"id":271,"result":{}} +[2026-05-04 02:21:08.626] [info] [webhooks.cpp:170] [1934] return total: {"id":272,"result":{}} +[2026-05-04 02:21:08.830] [info] [webhooks.cpp:170] [1934] return total: {"id":273,"result":{}} +[2026-05-04 02:21:09.045] [info] [webhooks.cpp:170] [1934] return total: {"id":274,"result":{}} +[2026-05-04 02:21:09.388] [info] [webhooks.cpp:170] [1934] return total: {"id":275,"result":{}} +[2026-05-04 02:21:09.733] [info] [webhooks.cpp:170] [1934] return total: {"id":276,"result":{}} +[2026-05-04 02:21:10.096] [info] [webhooks.cpp:170] [1934] return total: {"id":277,"result":{}} +[2026-05-04 02:21:10.344] [info] [webhooks.cpp:170] [1934] return total: {"id":278,"result":{}} +[2026-05-04 02:21:10.611] [info] [webhooks.cpp:170] [1934] return total: {"id":279,"result":{}} +[2026-05-04 02:21:10.853] [info] [webhooks.cpp:170] [1934] return total: {"id":280,"result":{}} +[2026-05-04 02:21:11.060] [info] [webhooks.cpp:170] [1934] return total: {"id":281,"result":{}} +[2026-05-04 02:21:11.288] [info] [webhooks.cpp:170] [1934] return total: {"id":282,"result":{}} +[2026-05-04 02:21:11.538] [info] [webhooks.cpp:170] [1934] return total: {"id":283,"result":{}} +[2026-05-04 02:21:11.763] [info] [webhooks.cpp:170] [1934] return total: {"id":284,"result":{}} +[2026-05-04 02:21:11.987] [info] [webhooks.cpp:170] [1934] return total: {"id":285,"result":{}} +[2026-05-04 02:21:12.192] [info] [webhooks.cpp:170] [1934] return total: {"id":286,"result":{}} +[2026-05-04 02:21:12.442] [info] [webhooks.cpp:170] [1934] return total: {"id":287,"result":{}} +[2026-05-04 02:21:12.671] [info] [webhooks.cpp:170] [1934] return total: {"id":288,"result":{}} +[2026-05-04 02:21:12.877] [info] [webhooks.cpp:170] [1934] return total: {"id":289,"result":{}} +[2026-05-04 02:21:13.106] [info] [webhooks.cpp:170] [1934] return total: {"id":290,"result":{}} +[2026-05-04 02:21:13.345] [info] [webhooks.cpp:170] [1934] return total: {"id":291,"result":{}} +[2026-05-04 02:21:13.551] [info] [webhooks.cpp:170] [1934] return total: {"id":292,"result":{}} +[2026-05-04 02:21:13.776] [info] [webhooks.cpp:170] [1934] return total: {"id":293,"result":{}} +[2026-05-04 02:21:13.981] [info] [webhooks.cpp:170] [1934] return total: {"id":294,"result":{}} +[2026-05-04 02:21:14.225] [info] [webhooks.cpp:170] [1934] return total: {"id":295,"result":{}} +[2026-05-04 02:21:14.439] [info] [webhooks.cpp:170] [1934] return total: {"id":296,"result":{}} +[2026-05-04 02:21:14.669] [info] [webhooks.cpp:170] [1934] return total: {"id":297,"result":{}} +[2026-05-04 02:21:14.892] [info] [webhooks.cpp:170] [1934] return total: {"id":298,"result":{}} +[2026-05-04 02:21:15.118] [info] [webhooks.cpp:170] [1934] return total: {"id":299,"result":{}} +[2026-05-04 02:21:15.343] [info] [webhooks.cpp:170] [1934] return total: {"id":300,"result":{}} +[2026-05-04 02:21:15.568] [info] [webhooks.cpp:170] [1934] return total: {"id":301,"result":{}} +[2026-05-04 02:21:15.792] [info] [webhooks.cpp:170] [1934] return total: {"id":302,"result":{}} +[2026-05-04 02:21:16.019] [info] [webhooks.cpp:170] [1934] return total: {"id":303,"result":{}} +[2026-05-04 02:21:16.243] [info] [webhooks.cpp:170] [1934] return total: {"id":304,"result":{}} +[2026-05-04 02:21:16.448] [info] [webhooks.cpp:170] [1934] return total: {"id":305,"result":{}} +[2026-05-04 02:21:16.669] [info] [webhooks.cpp:170] [1934] return total: {"id":306,"result":{}} +[2026-05-04 02:21:16.856] [info] [webhooks.cpp:170] [1934] return total: {"id":307,"result":{}} +[2026-05-04 02:21:17.061] [info] [webhooks.cpp:170] [1934] return total: {"id":308,"result":{}} +[2026-05-04 02:21:17.285] [info] [webhooks.cpp:170] [1934] return total: {"id":309,"result":{}} +[2026-05-04 02:21:17.510] [info] [webhooks.cpp:170] [1934] return total: {"id":310,"result":{}} +[2026-05-04 02:21:17.725] [info] [webhooks.cpp:170] [1934] return total: {"id":311,"result":{}} +[2026-05-04 02:21:17.936] [info] [webhooks.cpp:170] [1934] return total: {"id":312,"result":{}} +[2026-05-04 02:21:18.164] [info] [webhooks.cpp:170] [1934] return total: {"id":313,"result":{}} +[2026-05-04 02:21:18.389] [info] [webhooks.cpp:170] [1934] return total: {"id":314,"result":{}} +[2026-05-04 02:21:18.594] [info] [webhooks.cpp:170] [1934] return total: {"id":315,"result":{}} +[2026-05-04 02:21:18.818] [info] [webhooks.cpp:170] [1934] return total: {"id":316,"result":{}} +[2026-05-04 02:21:19.027] [info] [webhooks.cpp:170] [1934] return total: {"id":317,"result":{}} +[2026-05-04 02:21:19.229] [info] [webhooks.cpp:170] [1934] return total: {"id":318,"result":{}} +[2026-05-04 02:21:19.457] [info] [webhooks.cpp:170] [1934] return total: {"id":319,"result":{}} +[2026-05-04 02:21:19.701] [info] [webhooks.cpp:170] [1934] return total: {"id":320,"result":{}} +[2026-05-04 02:21:19.882] [info] [webhooks.cpp:170] [1934] return total: {"id":321,"result":{}} +[2026-05-04 02:21:20.105] [info] [webhooks.cpp:170] [1934] return total: {"id":322,"result":{}} +[2026-05-04 02:21:20.290] [info] [webhooks.cpp:170] [1934] return total: {"id":323,"result":{}} +[2026-05-04 02:21:20.434] [info] [webhooks.cpp:170] [1934] return total: {"id":324,"result":{}} +[2026-05-04 02:21:23.093] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:21:23.095] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:21:23.096] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:21:23.096] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:21:23.097] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:21:23.098] [info] [webhooks.cpp:170] [1934] return total: {"id":325,"result":{}} +[2026-05-04 02:21:23.098] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:21:23.099] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:21:23.100] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:21:24.306] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:21:24.308] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:21:24.309] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:21:24.309] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:21:24.311] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:21:24.312] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:21:24.312] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:21:24.312] [info] [webhooks.cpp:170] [1934] return total: {"id":326,"result":{}} +[2026-05-04 02:21:24.312] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:21:27.262] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:21:27.264] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:21:27.265] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:21:27.265] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:21:27.268] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:21:27.269] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:21:27.269] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:21:27.270] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:21:27.272] [info] [webhooks.cpp:170] [1934] return total: {"id":327,"result":{}} +[2026-05-04 02:21:27.818] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:21:27.820] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:21:27.821] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:21:27.821] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:21:27.824] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:21:27.824] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:21:27.824] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:21:27.825] [info] [webhooks.cpp:170] [1934] return total: {"id":328,"result":{}} +[2026-05-04 02:21:27.825] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:21:51.594] [info] [mmu.cpp:2865] [2011] exec automatic pre-feed process, channel 0 +[2026-05-04 02:22:02.227] [info] [filament_switch_sensor.cpp:368] [1934] _button_handler switch_fila_det true +[2026-05-04 02:22:02.228] [info] [mmu.cpp:2093] [1934] {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-04 02:22:02.228] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"CANVAS_FILA_DET_FEEDBACK","result":"1"} +[2026-05-04 02:22:02.229] [info] [filament_switch_sensor.cpp:247] [1934] name:filament_sensor, note_filament_present is_filament_present true filament_present true sensor_enabled 1 canvas_enabled 1 +[2026-05-04 02:22:02.230] [info] [filament_switch_sensor.cpp:201] [1934] _insert_event_handler name: filament_sensor +[2026-05-04 02:22:05.295] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:22:05.297] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:05.298] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:05.298] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:05.299] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:05.301] [info] [webhooks.cpp:170] [1934] return total: {"id":329,"result":{}} +[2026-05-04 02:22:05.301] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:05.301] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:05.302] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:22:29.253] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=862.490740536,time_avg=832.9558549782389,freq=23999998.552765418,diff=18802.042762756348(0.0007834184484481812),stddev=311.8533640754661 +[2026-05-04 02:22:29.255] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=862.4918322860001,time_avg=832.9560663586699,freq=119998773.4161923,diff=225062.47723388672(0.0018755206436157227),stddev=2311.29828017113 +[2026-05-04 02:22:29.258] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=862.4937275359999,time_avg=832.9563914336724,freq=119998542.60282433,diff=104166.25918579102(0.0008680521598815918),stddev=1234.1705555346828 +[2026-05-04 02:22:30.237] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=863.475394828,time_avg=832.9558549782389,freq=23999998.552765418,diff=21812.459785461426(0.0009088524910608927),stddev=311.8533640754661 +[2026-05-04 02:22:30.239] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=863.476319828,time_avg=832.9560663586699,freq=119998773.4161923,diff=209664.9937286377(0.0017472082810719809),stddev=2311.29828017113 +[2026-05-04 02:22:30.241] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=863.478064953,time_avg=832.9563914336724,freq=119998542.60282433,diff=90580.78974914551(0.0007548399145762126),stddev=1234.1705555346828 +[2026-05-04 02:22:31.224] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=864.461729578,time_avg=832.9560663586699,freq=119998773.4161923,diff=282225.6813659668(0.0023518806780497233),stddev=2311.29828017113 +[2026-05-04 02:22:31.225] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=864.460627037,time_avg=832.9558549782389,freq=23999998.552765418,diff=26223.869647979736(0.001092661235332489),stddev=311.8533640754661 +[2026-05-04 02:22:31.226] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=864.464043995,time_avg=832.9563914336724,freq=119998542.60282433,diff=126056.71281433105(0.001050472606786092),stddev=1234.1705555346828 +[2026-05-04 02:22:31.946] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:22:31.955] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:31.957] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:31.957] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:31.964] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:31.967] [info] [webhooks.cpp:170] [1934] return total: {"id":330,"result":{}} +[2026-05-04 02:22:31.982] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:31.993] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:32.039] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:22:32.209] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=865.44602437,time_avg=832.9560663586699,freq=119998773.4161923,diff=257403.96142578125(0.0021450330118815103),stddev=2311.29828017113 +[2026-05-04 02:22:32.209] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=865.44484362,time_avg=832.9558549782389,freq=23999998.552765418,diff=28108.302040100098(0.0011711792516708374),stddev=311.8533640754661 +[2026-05-04 02:22:32.210] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=865.44813287,time_avg=832.9563914336724,freq=119998542.60282433,diff=132065.9211730957(0.0011005493431091309),stddev=1234.1705555346828 +[2026-05-04 02:22:32.646] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:22:32.662] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:32.665] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:32.666] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:32.672] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:32.676] [info] [webhooks.cpp:170] [1934] return total: {"id":331,"result":{}} +[2026-05-04 02:22:32.694] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:32.695] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:32.708] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:22:33.194] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=866.430443746,time_avg=832.9558549782389,freq=23999998.552765418,diff=23490.704433441162(0.0009787793513933818),stddev=311.8533640754661 +[2026-05-04 02:22:33.194] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=866.432232371,time_avg=832.9560663586699,freq=119998773.4161923,diff=145983.50817871094(0.001216529234822591),stddev=2311.29828017113 +[2026-05-04 02:22:33.197] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=866.4315388289999,time_avg=832.9563914336724,freq=119998542.60282433,diff=367858.0542449951(0.0030654837853749594),stddev=1234.1705555346828 +[2026-05-04 02:22:33.398] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:842.77800000038,last_temp:24.19121520949119,temp:24.19121520949119,target_temp:0,smoothed_temp:24.208871927371728 +[2026-05-04 02:22:34.050] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:22:34.069] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:34.073] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:34.074] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:34.179] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=867.416336955,time_avg=832.9558549782389,freq=23999998.552765418,diff=55013.115253448486(0.0022922131355603537),stddev=311.8533640754661 +[2026-05-04 02:22:34.187] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=867.424729246,time_avg=832.9563914336724,freq=119998542.60282433,diff=250881.4871520996(0.00209067905960083),stddev=1234.1705555346828 +[2026-05-04 02:22:34.187] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=867.424261246,time_avg=832.9560663586699,freq=119998773.4161923,diff=306087.314743042(0.002550727622858683),stddev=2311.29828017113 +[2026-05-04 02:22:34.329] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:34.332] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:34.333] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:34.334] [info] [webhooks.cpp:170] [1934] return total: {"id":332,"result":{}} +[2026-05-04 02:22:34.343] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:22:34.984] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:22:34.989] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:34.992] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:34.993] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:34.998] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:35.000] [info] [webhooks.cpp:170] [1934] return total: {"id":333,"result":{}} +[2026-05-04 02:22:35.012] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:35.013] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:35.022] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:22:35.186] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=868.4235369969999,time_avg=832.9563914336724,freq=119998542.60282433,diff=178573.02674865723(0.0014881085562388101),stddev=1234.1705555346828 +[2026-05-04 02:22:35.187] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=868.419851413,time_avg=832.9558549782389,freq=23999998.552765418,diff=24654.575576782227(0.001027273982365926),stddev=311.8533640754661 +[2026-05-04 02:22:35.186] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=868.421398705,time_avg=832.9560663586699,freq=119998773.4161923,diff=198147.30740356445(0.0016512275616963705),stddev=2311.29828017113 +[2026-05-04 02:22:36.169] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=869.403968247,time_avg=832.9558549782389,freq=23999998.552765418,diff=25004.983825683594(0.0010418743260701498),stddev=311.8533640754661 +[2026-05-04 02:22:36.169] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=869.4048686220001,time_avg=832.9560663586699,freq=119998773.4161923,diff=242761.57566833496(0.002023013130569458),stddev=2311.29828017113 +[2026-05-04 02:22:36.171] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=869.406416456,time_avg=832.9563914336724,freq=119998542.60282433,diff=181330.39248657227(0.001511086604054769),stddev=1234.1705555346828 +[2026-05-04 02:22:36.221] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:22:36.227] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:36.230] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:36.231] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:37.152] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=870.389037539,time_avg=832.9558549782389,freq=23999998.552765418,diff=22440.40145111084(0.0009350167271296183),stddev=311.8533640754661 +[2026-05-04 02:22:37.154] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=870.3899934140001,time_avg=832.9560663586699,freq=119998773.4161923,diff=295926.87379455566(0.0024660572816212973),stddev=2311.29828017113 +[2026-05-04 02:22:37.155] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=870.3924934979999,time_avg=832.9563914336724,freq=119998542.60282433,diff=117806.45838928223(0.000981720486577352),stddev=1234.1705555346828 +[2026-05-04 02:22:38.055] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:847.4279778913223,last_temp:229.45515743120114,temp:229.45515743120114,target_temp:230,smoothed_temp:229.34068127585283 +[2026-05-04 02:22:38.138] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=871.374035582,time_avg=832.9558549782389,freq=23999998.552765418,diff=20443.794971466064(0.0008518247904777526),stddev=311.8533640754661 +[2026-05-04 02:22:38.138] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=871.374926873,time_avg=832.9560663586699,freq=119998773.4161923,diff=206267.89723205566(0.0017188991436004638),stddev=2311.29828017113 +[2026-05-04 02:22:38.139] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=871.37660854,time_avg=832.9563914336724,freq=119998542.60282433,diff=130221.66485595703(0.0010851805404663087),stddev=1234.1705555346828 +[2026-05-04 02:22:38.331] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:38.333] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:38.334] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:38.335] [info] [webhooks.cpp:170] [1934] return total: {"id":334,"result":{}} +[2026-05-04 02:22:38.342] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:22:38.343] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:38.351] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:38.354] [info] [webhooks.cpp:170] [1934] return total: {"id":335,"result":{}} +[2026-05-04 02:22:38.359] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:38.360] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:38.376] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:38.378] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:38.519] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:22:38.526] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:38.529] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:38.529] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:39.124] [info] [clocksync.cpp:223] [1988] mcu 'bed_sensor': Resetting prediction variance: sent_time=872.360444165,time_avg=832.9560663586699,freq=119998773.4161923,diff=217189.67678833008(0.001809913973236084),stddev=2311.29828017113 +[2026-05-04 02:22:39.124] [info] [clocksync.cpp:223] [1986] mcu 'mcu': Resetting prediction variance: sent_time=872.359332082,time_avg=832.9558549782389,freq=23999998.552765418,diff=30347.22092819214(0.0012644675386746724),stddev=311.8533640754661 +[2026-05-04 02:22:39.127] [info] [clocksync.cpp:223] [1994] mcu 'toolhead': Resetting prediction variance: sent_time=872.3618161649999,time_avg=832.9563914336724,freq=119998542.60282433,diff=203426.50367736816(0.001695220863978068),stddev=1234.1705555346828 +[2026-05-04 02:22:40.331] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:40.333] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:40.333] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:40.334] [info] [webhooks.cpp:170] [1934] return total: {"id":336,"result":{}} +[2026-05-04 02:22:40.342] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:22:40.341] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:40.381] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:40.382] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:42.332] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:42.335] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:42.335] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:42.337] [info] [webhooks.cpp:170] [1934] return total: {"id":337,"result":{}} +[2026-05-04 02:22:42.353] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:22:42.354] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:22:42.369] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:42.372] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:42.373] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:44.333] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:44.335] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:44.336] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:44.339] [info] [webhooks.cpp:170] [1934] return total: {"id":338,"result":{}} +[2026-05-04 02:22:44.345] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:22:44.368] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:44.371] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:44.371] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:46.334] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:46.336] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:46.337] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:46.340] [info] [webhooks.cpp:170] [1934] return total: {"id":339,"result":{}} +[2026-05-04 02:22:46.345] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:22:46.348] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:22:46.374] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:46.376] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:46.377] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:48.334] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:48.335] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:48.335] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:48.336] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:22:48.338] [info] [webhooks.cpp:170] [1934] return total: {"id":340,"result":{}} +[2026-05-04 02:22:48.340] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:22:48.342] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:48.343] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:48.343] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:50.335] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:50.336] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:50.336] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:50.337] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:22:50.338] [info] [webhooks.cpp:170] [1934] return total: {"id":341,"result":{}} +[2026-05-04 02:22:50.340] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:22:50.342] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:50.343] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:50.343] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:52.336] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:52.337] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:52.337] [info] [webhooks.cpp:170] [1934] return total: {"id":342,"result":{}} +[2026-05-04 02:22:52.337] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:52.338] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:22:52.338] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:22:52.340] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:52.346] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:52.346] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:54.338] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:54.339] [info] [webhooks.cpp:170] [1934] return total: {"id":343,"result":{}} +[2026-05-04 02:22:54.339] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:54.339] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:54.340] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:22:54.343] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:54.345] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:54.345] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:56.338] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:56.339] [info] [webhooks.cpp:170] [1934] return total: {"id":344,"result":{}} +[2026-05-04 02:22:56.339] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:56.339] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:56.342] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:22:56.344] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1061"} +[2026-05-04 02:22:56.344] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1061"} +[2026-05-04 02:22:56.345] [info] [device_status.cpp:989] [1945] M2202 result_code:1061 +[2026-05-04 02:22:57.270] [info] [mmu.cpp:2093] [1934] {"command":"CANVAS_WRAP_FILA_FEEDBACK","result":"1"} +[2026-05-04 02:22:57.271] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"CANVAS_WRAP_FILA_FEEDBACK","result":"1"} +[2026-05-04 02:22:58.340] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1063"} +[2026-05-04 02:22:58.341] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1063"} +[2026-05-04 02:22:58.341] [info] [device_status.cpp:989] [1945] M2202 result_code:1063 +[2026-05-04 02:22:58.342] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:22:58.343] [info] [webhooks.cpp:170] [1934] return total: {"id":345,"result":{}} +[2026-05-04 02:22:59.430] [info] [mmu.cpp:2093] [1934] {"command":"CANVAS_WRAP_FILA_FEEDBACK","result":"0"} +[2026-05-04 02:22:59.430] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"CANVAS_WRAP_FILA_FEEDBACK","result":"0"} +[2026-05-04 02:23:00.309] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:23:00.311] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:23:00.312] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:23:00.313] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:23:02.342] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:23:02.342] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:23:02.342] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:23:02.343] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:23:02.346] [info] [webhooks.cpp:170] [1934] return total: {"id":346,"result":{}} +[2026-05-04 02:23:02.348] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:23:02.351] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:23:02.351] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:23:02.352] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:23:02.356] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:23:02.356] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:23:02.356] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:23:02.357] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:23:02.361] [info] [webhooks.cpp:170] [1934] return total: {"id":347,"result":{}} +[2026-05-04 02:23:02.383] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:23:02.385] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:23:02.386] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:23:02.386] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:23:04.342] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:23:04.343] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:23:04.343] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:23:04.344] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:23:04.345] [info] [webhooks.cpp:170] [1934] return total: {"id":348,"result":{}} +[2026-05-04 02:23:04.346] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:23:04.349] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:23:04.350] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:23:04.350] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:23:06.344] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:23:06.345] [info] [webhooks.cpp:170] [1934] return total: {"id":349,"result":{}} +[2026-05-04 02:23:06.345] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:23:06.345] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:23:06.346] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:23:06.346] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:23:06.349] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:23:06.350] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:23:06.351] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:23:08.344] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:23:08.345] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:23:08.345] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:23:08.346] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:23:08.346] [info] [webhooks.cpp:170] [1934] return total: {"id":350,"result":{}} +[2026-05-04 02:23:08.348] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:23:08.350] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:23:08.351] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:23:08.352] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:23:10.346] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:23:10.346] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:23:10.347] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:23:10.347] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:23:10.348] [info] [webhooks.cpp:170] [1934] return total: {"id":351,"result":{}} +[2026-05-04 02:23:10.349] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:23:10.350] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:23:10.354] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:23:10.354] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:23:12.348] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:23:12.350] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:23:12.351] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:23:12.354] [info] [webhooks.cpp:170] [1934] return total: {"id":352,"result":{}} +[2026-05-04 02:23:12.361] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:23:12.361] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:23:12.377] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:23:12.380] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:23:12.380] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:23:12.637] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=905.862751765,time_avg=873.1933533764635,freq=24000030.076017633,diff=278547.9627838135(0.011606165115992228),stddev=16412.809145655934 +[2026-05-04 02:23:14.348] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:23:14.351] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:23:14.352] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:23:14.354] [info] [webhooks.cpp:170] [1934] return total: {"id":353,"result":{}} +[2026-05-04 02:23:14.362] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:23:14.374] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:23:14.391] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:23:14.391] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:23:16.350] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:23:16.352] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:23:16.352] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:23:16.355] [info] [webhooks.cpp:170] [1934] return total: {"id":354,"result":{}} +[2026-05-04 02:23:16.373] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:23:16.391] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:23:16.396] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:23:16.404] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:23:18.350] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:23:18.352] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:23:18.353] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:23:18.355] [info] [webhooks.cpp:170] [1934] return total: {"id":355,"result":{}} +[2026-05-04 02:23:18.362] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:23:18.364] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:23:18.379] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:23:18.380] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:23:20.350] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:23:20.351] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:23:20.351] [info] [webhooks.cpp:170] [1934] return total: {"id":356,"result":{}} +[2026-05-04 02:23:20.351] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:23:20.354] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:23:20.356] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:23:20.357] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:23:20.357] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:23:22.351] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:23:22.352] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:23:22.352] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:23:22.352] [info] [webhooks.cpp:170] [1934] return total: {"id":357,"result":{}} +[2026-05-04 02:23:22.353] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:23:22.354] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:23:22.356] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:23:22.357] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:23:22.357] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:23:24.352] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:23:24.353] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:23:24.353] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:23:24.354] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:23:24.356] [info] [webhooks.cpp:170] [1934] return total: {"id":358,"result":{}} +[2026-05-04 02:23:24.358] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:23:24.360] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:23:24.361] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:23:24.361] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:23:26.354] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:23:26.355] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:23:26.355] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:23:26.355] [info] [webhooks.cpp:170] [1934] return total: {"id":359,"result":{}} +[2026-05-04 02:23:26.358] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:23:26.358] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:23:26.360] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:23:26.362] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:23:26.362] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:23:28.355] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:23:28.355] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:23:28.355] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:23:28.356] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:23:28.357] [info] [webhooks.cpp:170] [1934] return total: {"id":360,"result":{}} +[2026-05-04 02:23:28.359] [info] [device_status.cpp:1674] [1934] Device status change to: 13, last status: 1 +[2026-05-04 02:23:28.361] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1062"} +[2026-05-04 02:23:28.362] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1062"} +[2026-05-04 02:23:28.363] [info] [device_status.cpp:989] [1945] M2202 result_code:1062 +[2026-05-04 02:23:30.356] [info] [gcode.cpp:850] [1934] cmd_M2202 res.dump:{"command":"M2202","result":"1064"} +[2026-05-04 02:23:30.357] [info] [gcode.cpp:1940] [1945] update_device_status: {"command":"M2202","result":"1064"} +[2026-05-04 02:23:30.357] [info] [device_status.cpp:989] [1945] M2202 result_code:1064 +[2026-05-04 02:23:30.357] [info] [webhooks.cpp:170] [1934] return total: {"id":361,"result":{}} +[2026-05-04 02:23:30.358] [info] [device_status.cpp:1674] [1945] Device status change to: 1, last status: 13 +[2026-05-04 02:23:45.112] [error] [tmc_uart.cpp:319] [1934] _decode_read error #1 +[2026-05-04 02:24:15.630] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:24:19.572] [error] [tmc_uart.cpp:295] [1934] _decode_read error #0 +[2026-05-04 02:24:33.896] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:963.27800000038,last_temp:24.612475126516415,temp:24.612475126516415,target_temp:0,smoothed_temp:24.62161299772409 +[2026-05-04 02:24:38.048] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:967.4294830813528,last_temp:230.5327788348743,temp:230.5327788348743,target_temp:230,smoothed_temp:230.86742133061068 +[2026-05-04 02:24:50.087] [error] [tmc_uart.cpp:319] [1934] _decode_read error #1 +[2026-05-04 02:25:05.838] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:25:35.373] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:25:58.018] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:26:02.943] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=1076.1851916790001,time_avg=1046.6400709278837,freq=119998445.8065308,diff=80808.4282836914(0.0006734035690307617),stddev=7813.181803533511 +[2026-05-04 02:26:34.396] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:1083.77800000038,last_temp:24.78678933039231,temp:24.78678933039231,target_temp:0,smoothed_temp:24.78379440167638 +[2026-05-04 02:26:38.049] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:1087.4309924256827,last_temp:231.0549578769938,temp:231.0549578769938,target_temp:230,smoothed_temp:230.47075641544836 +[2026-05-04 02:27:05.952] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:27:23.678] [info] [clocksync.cpp:206] [1986] mcu 'mcu': New minimum RTT: sent_time=1156.921457884,half_rtt=7.062500003485184e-05,freq=23999998.884707004 +[2026-05-04 02:27:40.415] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:28:32.597] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=1225.836759417,time_avg=1196.3021121597997,freq=24000000.544181276,diff=22997.420459747314(0.0009582258524894714),stddev=234.27091100451662 +[2026-05-04 02:28:32.598] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=1225.837722751,time_avg=1196.302383310705,freq=119998769.96628773,diff=191965.35452270508(0.001599711287689209),stddev=2167.600596076649 +[2026-05-04 02:28:32.602] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=1225.839958709,time_avg=1196.2968904225431,freq=119998453.38006552,diff=130396.45538330078(0.0010866371281941733),stddev=2863.140112508 +[2026-05-04 02:28:33.581] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=1226.820786709,time_avg=1196.3021121597997,freq=24000000.544181276,diff=22538.876972198486(0.0009391198738416035),stddev=234.27091100451662 +[2026-05-04 02:28:33.582] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=1226.821728251,time_avg=1196.302383310705,freq=119998769.96628773,diff=173287.71447753906(0.0014440642873128256),stddev=2167.600596076649 +[2026-05-04 02:28:33.587] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=1226.823611793,time_avg=1196.2968904225431,freq=119998453.38006552,diff=111273.71286010742(0.0009272809405008952),stddev=2863.140112508 +[2026-05-04 02:28:34.568] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=1227.8067389179998,time_avg=1196.302383310705,freq=119998769.96628773,diff=260043.27081298828(0.0021670272567749023),stddev=2167.600596076649 +[2026-05-04 02:28:34.568] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=1227.805825376,time_avg=1196.3021121597997,freq=24000000.544181276,diff=21801.332931518555(0.0009083888721466064),stddev=234.27091100451662 +[2026-05-04 02:28:34.569] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=1227.8088850010001,time_avg=1196.2968904225431,freq=119998453.38006552,diff=135506.59603881836(0.0011292216336568196),stddev=2863.140112508 +[2026-05-04 02:28:34.896] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:1204.27800000038,last_temp:24.985151188409645,temp:24.985151188409645,target_temp:0,smoothed_temp:24.96916028600534 +[2026-05-04 02:28:35.553] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=1228.791741169,time_avg=1196.302383310705,freq=119998769.96628773,diff=267590.7367553711(0.0022299228062947593),stddev=2167.600596076649 +[2026-05-04 02:28:35.553] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=1228.790679377,time_avg=1196.3021121597997,freq=24000000.544181276,diff=30224.77299118042(0.0012593655412991842),stddev=234.27091100451662 +[2026-05-04 02:28:35.557] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=1228.793321377,time_avg=1196.2968904225431,freq=119998453.38006552,diff=173044.0249633789(0.001442033541361491),stddev=2863.140112508 +[2026-05-04 02:28:36.537] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=1229.775938544,time_avg=1196.3021121597997,freq=24000000.544181276,diff=26346.22883605957(0.0010977595348358154),stddev=234.27091100451662 +[2026-05-04 02:28:36.540] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=1229.777362627,time_avg=1196.302383310705,freq=119998769.96628773,diff=260512.12438964844(0.002170934369913737),stddev=2167.600596076649 +[2026-05-04 02:28:36.544] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=1229.780496502,time_avg=1196.2968904225431,freq=119998453.38006552,diff=268515.8096923828(0.0022376317474365236),stddev=2863.140112508 +[2026-05-04 02:28:36.865] [info] [extruder.cpp:493] [1934] cmd_M104 temp 0 index -1 wait false +[2026-05-04 02:28:36.866] [info] [heaters.cpp:1104] [1934] __func__:set_temperature,temp:0,wait:false +[2026-05-04 02:28:36.867] [info] [toolhead.cpp:904] [1934] get_last_move_time +[2026-05-04 02:28:37.528] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=1230.7657736699998,time_avg=1196.302383310705,freq=119998769.96628773,diff=290556.7433166504(0.00242130619430542),stddev=2167.600596076649 +[2026-05-04 02:28:37.528] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=1230.764699628,time_avg=1196.3021121597997,freq=24000000.544181276,diff=25649.674766540527(0.0010687364486058554),stddev=234.27091100451662 +[2026-05-04 02:28:37.530] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=1230.76790667,time_avg=1196.2968904225431,freq=119998453.38006552,diff=214378.79794311523(0.0017864899828592936),stddev=2863.140112508 +[2026-05-04 02:28:38.050] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:1207.4325327054498,last_temp:229.2326062022866,temp:229.2326062022866,target_temp:0,smoothed_temp:229.71127180880336 +[2026-05-04 02:28:38.511] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=1231.750153212,time_avg=1196.302383310705,freq=119998769.96628773,diff=256980.5233154297(0.0021415043609619142),stddev=2167.600596076649 +[2026-05-04 02:28:38.512] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=1231.7520791700001,time_avg=1196.2968904225431,freq=119998453.38006552,diff=125444.9387512207(0.0010453744895935059),stddev=2863.140112508 +[2026-05-04 02:28:38.513] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=1231.749228337,time_avg=1196.3021121597997,freq=24000000.544181276,diff=21618.12300491333(0.0009007551252047221),stddev=234.27091100451662 +[2026-05-04 02:28:39.495] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=1232.734231546,time_avg=1196.3021121597997,freq=24000000.544181276,diff=36023.57098388672(0.0015009821243286133),stddev=234.27091100451662 +[2026-05-04 02:28:39.496] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=1232.7351221709998,time_avg=1196.302383310705,freq=119998769.96628773,diff=172312.98837280273(0.0014359415697733561),stddev=2167.600596076649 +[2026-05-04 02:28:39.498] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=1232.7364999620002,time_avg=1196.2968904225431,freq=119998453.38006552,diff=161882.4235534668(0.0013490201962788899),stddev=2863.140112508 +[2026-05-04 02:28:40.481] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=1233.719578129,time_avg=1196.302383310705,freq=119998769.96628773,diff=262864.9423522949(0.0021905411862691245),stddev=2167.600596076649 +[2026-05-04 02:28:40.481] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=1233.718387588,time_avg=1196.3021121597997,freq=24000000.544181276,diff=29437.027423858643(0.0012265428093274433),stddev=234.27091100451662 +[2026-05-04 02:28:40.482] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=1233.721430546,time_avg=1196.2968904225431,freq=119998453.38006552,diff=175095.65686035156(0.001459130473836263),stddev=2863.140112508 +[2026-05-04 02:28:41.476] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=1234.703309755,time_avg=1196.3021121597997,freq=24000000.544181276,diff=29500.48345184326(0.0012291868104934692),stddev=234.27091100451662 +[2026-05-04 02:28:41.478] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=1234.7053178380002,time_avg=1196.2968904225431,freq=119998453.38006552,diff=144128.3165283203(0.0012010693044026692),stddev=2863.140112508 +[2026-05-04 02:28:41.477] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=1234.7040246299998,time_avg=1196.302383310705,freq=119998769.96628773,diff=243713.7247619629(0.002030947706349691),stddev=2167.600596076649 +[2026-05-04 02:28:42.446] [info] [clocksync.cpp:223] [1986] mcu 'mcu': Resetting prediction variance: sent_time=1235.687122964,time_avg=1196.3021121597997,freq=24000000.544181276,diff=27623.93207550049(0.0011509971698125203),stddev=234.27091100451662 +[2026-05-04 02:28:42.447] [info] [clocksync.cpp:223] [1994] mcu 'toolhead': Resetting prediction variance: sent_time=1235.6891628800001,time_avg=1196.2968904225431,freq=119998453.38006552,diff=259704.91088867188(0.002164207590738932),stddev=2863.140112508 +[2026-05-04 02:28:42.448] [info] [clocksync.cpp:223] [1988] mcu 'bed_sensor': Resetting prediction variance: sent_time=1235.688092297,time_avg=1196.302383310705,freq=119998769.96628773,diff=506268.12115478516(0.00421890100962321),stddev=2167.600596076649 +[2026-05-04 02:28:57.730] [error] [tmc_uart.cpp:295] [1934] _decode_read error #0 +[2026-05-04 02:29:26.751] [error] [tmc_uart.cpp:295] [1934] _decode_read error #0 +[2026-05-04 02:29:56.283] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:30:35.394] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:1324.77800000038,last_temp:25.093866555315458,temp:25.093866555315458,target_temp:0,smoothed_temp:25.095569566225098 +[2026-05-04 02:30:38.051] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:1327.4340951493093,last_temp:138.3233599981778,temp:138.3233599981778,target_temp:0,smoothed_temp:138.57971680197198 +[2026-05-04 02:30:53.383] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:32:35.894] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:1445.27800000038,last_temp:25.0741202268415,temp:25.0741202268415,target_temp:0,smoothed_temp:25.07432554394208 +[2026-05-04 02:32:38.052] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:1447.4356612770364,last_temp:90.360449078572,temp:90.360449078572,target_temp:0,smoothed_temp:90.49250815105248 +[2026-05-04 02:33:10.232] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:33:31.898] [error] [tmc_uart.cpp:295] [1934] _decode_read error #0 +[2026-05-04 02:34:12.256] [info] [clocksync.cpp:206] [1994] mcu 'toolhead': New minimum RTT: sent_time=1565.500733871,half_rtt=0.0002513335000458028,freq=119998439.6323151 +[2026-05-04 02:34:36.393] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:1565.77800000038,last_temp:25.093866555315458,temp:25.093866555315458,target_temp:0,smoothed_temp:25.08634239372557 +[2026-05-04 02:34:38.053] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:1567.4372471425247,last_temp:63.621370154648616,temp:63.621370154648616,target_temp:0,smoothed_temp:63.59773316946661 +[2026-05-04 02:34:52.618] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:36:36.892] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:1686.27800000038,last_temp:25.05436498015132,temp:25.05436498015132,target_temp:0,smoothed_temp:25.05833951374758 +[2026-05-04 02:36:38.054] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:1687.4388501283083,last_temp:48.40639421099115,temp:48.40639421099115,target_temp:0,smoothed_temp:48.49057429478086 +[2026-05-04 02:38:37.392] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:1806.77800000038,last_temp:24.935645450913114,temp:24.935645450913114,target_temp:0,smoothed_temp:24.94457823166607 +[2026-05-04 02:38:37.422] [info] [heater_bed.cpp:57] [1934] cmd_M140 temp 0 wait false +[2026-05-04 02:38:37.422] [info] [heaters.cpp:1104] [1934] __func__:set_temperature,temp:0,wait:false +[2026-05-04 02:38:37.422] [info] [toolhead.cpp:904] [1934] get_last_move_time +[2026-05-04 02:38:37.423] [info] [idle_timeout.cpp:294] [1934] Device idle, activating heated bed protection. +[2026-05-04 02:38:38.055] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:1807.4404861052337,last_temp:43.38684900467382,temp:43.38684900467382,target_temp:0,smoothed_temp:43.34062228627031 +[2026-05-04 02:38:56.773] [error] [tmc_uart.cpp:319] [1934] _decode_read error #1 +[2026-05-04 02:39:27.292] [error] [tmc_uart.cpp:319] [1934] _decode_read error #1 +[2026-05-04 02:39:56.839] [error] [tmc_uart.cpp:295] [1934] _decode_read error #0 +[2026-05-04 02:40:04.716] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=1917.961655997,time_avg=1888.4224917464562,freq=119998746.8128352,diff=68234.56134033203(0.000568621344502767),stddev=1670.7515247267822 +[2026-05-04 02:40:04.715] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=1917.961382789,time_avg=1888.4222807766153,freq=23999999.48245011,diff=18264.815948486328(0.000761033997853597),stddev=286.2325534869574 +[2026-05-04 02:40:37.892] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:1927.27800000038,last_temp:24.905914979078204,temp:24.905914979078204,target_temp:0,smoothed_temp:24.903902504290812 +[2026-05-04 02:40:38.056] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:1927.442115081547,last_temp:40.182178862598164,temp:40.182178862598164,target_temp:0,smoothed_temp:39.98802246744035 +[2026-05-04 02:40:53.941] [info] [clocksync.cpp:206] [1988] mcu 'bed_sensor': New minimum RTT: sent_time=1967.187368062,half_rtt=0.00016212500008805364,freq=119998741.164666 +[2026-05-04 02:41:20.525] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=1993.77079295,time_avg=1964.1605959218762,freq=119998750.90277132,diff=64152.5068359375(0.0005346042236328125),stddev=1563.0959040715788 +[2026-05-04 02:41:48.981] [error] [tmc_uart.cpp:295] [1934] _decode_read error #0 +[2026-05-04 02:42:38.058] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:2047.4437858344638,last_temp:37.62155309229814,temp:37.62155309229814,target_temp:0,smoothed_temp:37.45744713807786 +[2026-05-04 02:42:38.392] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:2047.77800000038,last_temp:24.87120373153556,temp:24.87120373153556,target_temp:0,smoothed_temp:24.876091923470355 +[2026-05-04 02:42:55.054] [error] [tmc_uart.cpp:319] [1934] _decode_read error #1 +[2026-05-04 02:43:02.928] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:43:36.402] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=2129.647355432,time_avg=2100.11329873865,freq=119998331.74548234,diff=64326.53775024414(0.0005360544812520345),stddev=1788.643887171886 +[2026-05-04 02:43:38.174] [info] [extruder.cpp:493] [1934] cmd_M104 temp 0 index -1 wait false +[2026-05-04 02:43:38.174] [info] [heaters.cpp:1104] [1934] __func__:set_temperature,temp:0,wait:false +[2026-05-04 02:43:38.174] [info] [toolhead.cpp:904] [1934] get_last_move_time +[2026-05-04 02:44:00.026] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:44:38.060] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:2167.445457904291,last_temp:35.45739085957115,temp:35.45739085957115,target_temp:0,smoothed_temp:35.525537504854185 +[2026-05-04 02:44:38.892] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:2168.27800000038,last_temp:24.83149975681914,temp:24.83149975681914,target_temp:0,smoothed_temp:24.855769387684788 +[2026-05-04 02:46:18.842] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:46:38.061] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:2287.4471259880934,last_temp:34.240477829569045,temp:34.240477829569045,target_temp:0,smoothed_temp:34.297222096188925 +[2026-05-04 02:46:39.392] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:2288.77800000038,last_temp:24.85631899365211,temp:24.85631899365211,target_temp:0,smoothed_temp:24.860333134589055 +[2026-05-04 02:47:09.066] [info] [clocksync.cpp:206] [1994] mcu 'toolhead': New minimum RTT: sent_time=2342.31218745,half_rtt=0.0002503750001778826,freq=119998322.95787543 +[2026-05-04 02:47:51.400] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:47:57.319] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=2390.559602764,time_avg=2361.018230490086,freq=23999998.976945907,diff=34017.91079711914(0.0014174129498799642),stddev=350.1387999899665 +[2026-05-04 02:47:57.321] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=2390.562907473,time_avg=2361.0186888386547,freq=119998320.2020659,diff=139879.57928466797(0.0011656631607055664),stddev=1867.2762157285056 +[2026-05-04 02:47:57.321] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=2390.5609175560003,time_avg=2361.018525130746,freq=119998733.85969155,diff=185623.93603515625(0.0015468661336263021),stddev=2696.8495710135808 +[2026-05-04 02:47:58.302] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=2391.543135306,time_avg=2361.018230490086,freq=23999998.976945907,diff=27642.90901184082(0.0011517878754933675),stddev=350.1387999899665 +[2026-05-04 02:47:58.304] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=2391.54427089,time_avg=2361.018525130746,freq=119998733.85969155,diff=181738.91931152344(0.0015144909942626952),stddev=2696.8495710135808 +[2026-05-04 02:47:58.305] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=2391.546210015,time_avg=2361.0186888386547,freq=119998320.2020659,diff=104176.28887939453(0.0008681357406616211),stddev=1867.2762157285056 +[2026-05-04 02:47:59.288] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=2392.52918314,time_avg=2361.018525130746,freq=119998733.85969155,diff=217459.95642089844(0.001812166303507487),stddev=2696.8495710135808 +[2026-05-04 02:47:59.288] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=2392.528276099,time_avg=2361.018230490086,freq=23999998.976945907,diff=21475.884857177734(0.0008948285357157389),stddev=350.1387999899665 +[2026-05-04 02:47:59.289] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=2392.5309673069996,time_avg=2361.0186888386547,freq=119998320.2020659,diff=145215.44219970703(0.0012101286849975587),stddev=1867.2762157285056 +[2026-05-04 02:48:00.272] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=2393.513325641,time_avg=2361.018525130746,freq=119998733.85969155,diff=296235.89892578125(0.002468632491048177),stddev=2696.8495710135808 +[2026-05-04 02:48:00.272] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=2393.512324057,time_avg=2361.018230490086,freq=23999998.976945907,diff=24144.899589538574(0.0010060374828974406),stddev=350.1387999899665 +[2026-05-04 02:48:00.274] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=2393.515792849,time_avg=2361.0186888386547,freq=119998320.2020659,diff=185714.7100830078(0.001547622584025065),stddev=1867.2762157285056 +[2026-05-04 02:48:01.257] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=2394.497779391,time_avg=2361.018525130746,freq=119998733.85969155,diff=279724.35546875(0.0023310362955729167),stddev=2696.8495710135808 +[2026-05-04 02:48:01.256] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=2394.496878933,time_avg=2361.018230490086,freq=23999998.976945907,diff=21336.882843017578(0.0008890367851257324),stddev=350.1387999899665 +[2026-05-04 02:48:01.258] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=2394.4998463909997,time_avg=2361.0186888386547,freq=119998320.2020659,diff=154962.6812133789(0.0012913556767781575),stddev=1867.2762157285056 +[2026-05-04 02:48:02.241] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=2395.481955517,time_avg=2361.018230490086,freq=23999998.976945907,diff=23355.874626159668(0.0009731614427566528),stddev=350.1387999899665 +[2026-05-04 02:48:02.241] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=2395.482947683,time_avg=2361.018525130746,freq=119998733.85969155,diff=201440.67681884766(0.0016786723068237305),stddev=2696.8495710135808 +[2026-05-04 02:48:02.243] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=2395.4849937249996,time_avg=2361.0186888386547,freq=119998320.2020659,diff=86281.4496459961(0.0007190120803833008),stddev=1867.2762157285056 +[2026-05-04 02:48:03.226] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=2396.4678728920003,time_avg=2361.018525130746,freq=119998733.85969155,diff=286246.6502685547(0.0023853887522379555),stddev=2696.8495710135808 +[2026-05-04 02:48:03.226] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=2396.466784517,time_avg=2361.018230490086,freq=23999998.976945907,diff=43559.88215637207(0.0018149950898488363),stddev=350.1387999899665 +[2026-05-04 02:48:03.229] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=2396.470209434,time_avg=2361.0186888386547,freq=119998320.2020659,diff=178601.33294677734(0.0014883444412231446),stddev=1867.2762157285056 +[2026-05-04 02:48:04.211] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=2397.452001851,time_avg=2361.018230490086,freq=23999998.976945907,diff=24328.87409210205(0.0010137030871709188),stddev=350.1387999899665 +[2026-05-04 02:48:04.212] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=2397.452988684,time_avg=2361.018525130746,freq=119998733.85969155,diff=286162.90509033203(0.002384690875752767),stddev=2696.8495710135808 +[2026-05-04 02:48:04.213] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=2397.455273309,time_avg=2361.0186888386547,freq=119998320.2020659,diff=127357.04119873047(0.0010613086766560872),stddev=1867.2762157285056 +[2026-05-04 02:48:05.195] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=2398.436783393,time_avg=2361.018230490086,freq=23999998.976945907,diff=20547.873580932617(0.0008561613992055258),stddev=350.1387999899665 +[2026-05-04 02:48:05.197] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=2398.4376624760002,time_avg=2361.018525130746,freq=119998733.85969155,diff=277170.6002807617(0.002309755002339681),stddev=2696.8495710135808 +[2026-05-04 02:48:05.199] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=2398.439522101,time_avg=2361.0186888386547,freq=119998320.2020659,diff=178499.3402709961(0.0014874945022583007),stddev=1867.2762157285056 +[2026-05-04 02:48:06.183] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=2399.4244764349996,time_avg=2361.0186888386547,freq=119998320.2020659,diff=165833.78454589844(0.0013819482045491537),stddev=1867.2762157285056 +[2026-05-04 02:48:06.181] [info] [clocksync.cpp:219] [1986] mcu 'mcu': Ignoring clock sample: sent_time=2399.42143906,time_avg=2361.018230490086,freq=23999998.976945907,diff=44331.87293243408(0.0018471613721847534),stddev=350.1387999899665 +[2026-05-04 02:48:06.183] [info] [clocksync.cpp:219] [1988] mcu 'bed_sensor': Ignoring clock sample: sent_time=2399.422744893,time_avg=2361.018525130746,freq=119998733.85969155,diff=299699.81286621094(0.0024974984405517577),stddev=2696.8495710135808 +[2026-05-04 02:48:07.165] [info] [clocksync.cpp:223] [1988] mcu 'bed_sensor': Resetting prediction variance: sent_time=2400.406298769,time_avg=2361.018525130746,freq=119998733.85969155,diff=206018.01007080078(0.0017168167505900065),stddev=2696.8495710135808 +[2026-05-04 02:48:07.165] [info] [clocksync.cpp:223] [1986] mcu 'mcu': Resetting prediction variance: sent_time=2400.405379894,time_avg=2361.018230490086,freq=23999998.976945907,diff=22409.863563537598(0.0009337443151474),stddev=350.1387999899665 +[2026-05-04 02:48:07.166] [info] [clocksync.cpp:223] [1994] mcu 'toolhead': Resetting prediction variance: sent_time=2400.408457352,time_avg=2361.0186888386547,freq=119998320.2020659,diff=99192.63366699219(0.0008266052805582682),stddev=1867.2762157285056 +[2026-05-04 02:48:38.063] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:2407.448707087849,last_temp:33.107932077599514,temp:33.107932077599514,target_temp:0,smoothed_temp:33.09568934943875 +[2026-05-04 02:48:39.894] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:2409.27800000038,last_temp:24.861281139528614,temp:24.861281139528614,target_temp:0,smoothed_temp:24.86653506570429 +[2026-05-04 02:49:05.276] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:49:22.014] [error] [tmc_uart.cpp:295] [1934] _decode_read error #0 +[2026-05-04 02:50:25.022] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:50:38.064] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:2527.450481835935,last_temp:32.68140969670702,temp:32.68140969670702,target_temp:0,smoothed_temp:32.68527871194989 +[2026-05-04 02:50:40.392] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:2529.77800000038,last_temp:24.85631899365211,temp:24.85631899365211,target_temp:0,smoothed_temp:24.871486559906675 +[2026-05-04 02:52:38.066] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:2647.452179137614,last_temp:31.688712021833112,temp:31.688712021833112,target_temp:0,smoothed_temp:31.74606322023187 +[2026-05-04 02:52:40.891] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:2650.27800000038,last_temp:24.905914979078204,temp:24.905914979078204,target_temp:0,smoothed_temp:24.886659698327833 +[2026-05-04 02:53:38.726] [info] [heater_bed.cpp:57] [1934] cmd_M140 temp 0 wait false +[2026-05-04 02:53:38.726] [info] [heaters.cpp:1104] [1934] __func__:set_temperature,temp:0,wait:false +[2026-05-04 02:53:38.726] [info] [toolhead.cpp:904] [1934] get_last_move_time +[2026-05-04 02:53:38.726] [info] [idle_timeout.cpp:294] [1934] Device idle, activating heated bed protection. +[2026-05-04 02:54:03.599] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:54:38.067] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:2767.4538786648463,last_temp:31.05655776587497,temp:31.05655776587497,target_temp:0,smoothed_temp:31.29548420929039 +[2026-05-04 02:54:41.391] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:2770.77800000038,last_temp:24.91582739283723,temp:24.91582739283723,target_temp:0,smoothed_temp:24.91099637851565 +[2026-05-04 02:54:46.911] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:55:21.383] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:55:55.843] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:56:38.069] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:2887.455576803224,last_temp:30.750144997982034,temp:30.750144997982034,target_temp:0,smoothed_temp:30.916277503807184 +[2026-05-04 02:56:41.891] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:2891.27800000038,last_temp:24.910871468198366,temp:24.910871468198366,target_temp:0,smoothed_temp:24.90829190754098 +[2026-05-04 02:57:38.246] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 02:58:38.070] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:3007.4572740351173,last_temp:31.389563902759335,temp:31.389563902759335,target_temp:0,smoothed_temp:31.124396425891973 +[2026-05-04 02:58:39.477] [info] [extruder.cpp:493] [1934] cmd_M104 temp 0 index -1 wait false +[2026-05-04 02:58:39.477] [info] [heaters.cpp:1104] [1934] __func__:set_temperature,temp:0,wait:false +[2026-05-04 02:58:39.477] [info] [toolhead.cpp:904] [1934] get_last_move_time +[2026-05-04 02:58:42.391] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:3011.77800000038,last_temp:24.900957925260116,temp:24.900957925260116,target_temp:0,smoothed_temp:24.907199487373134 +[2026-05-04 02:59:46.250] [info] [clocksync.cpp:219] [1994] mcu 'toolhead': Ignoring clock sample: sent_time=3099.497830852,time_avg=3069.9480515100868,freq=119998281.75249016,diff=86786.59936523438(0.0007232216613769531),stddev=3366.662628536107 +[2026-05-04 03:00:38.071] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:3127.4589928642577,last_temp:30.315099582938444,temp:30.315099582938444,target_temp:0,smoothed_temp:30.501576583134042 +[2026-05-04 03:00:42.890] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:3132.27800000038,last_temp:24.92078275321154,temp:24.92078275321154,target_temp:0,smoothed_temp:24.92193488721991 +[2026-05-04 03:02:38.072] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:3247.460693416467,last_temp:30.626577402193107,temp:30.626577402193107,target_temp:0,smoothed_temp:30.613145167974984 +[2026-05-04 03:02:43.389] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:3252.77800000038,last_temp:24.93069178203308,temp:24.93069178203308,target_temp:0,smoothed_temp:24.937747783449886 +[2026-05-04 03:04:38.074] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:3367.462407375312,last_temp:29.968158275533256,temp:29.968158275533256,target_temp:0,smoothed_temp:30.118179468284925 +[2026-05-04 03:04:43.889] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:3373.27800000038,last_temp:24.940598556394264,temp:24.940598556394264,target_temp:0,smoothed_temp:24.944674427130792 +[2026-05-04 03:06:38.075] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:3487.4641315623367,last_temp:29.80892830191459,temp:29.80892830191459,target_temp:0,smoothed_temp:29.902129192293174 +[2026-05-04 03:06:44.388] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:3493.77800000038,last_temp:24.975254537740398,temp:24.975254537740398,target_temp:0,smoothed_temp:24.967149636983 +[2026-05-04 03:08:05.430] [info] [clocksync.cpp:206] [1994] mcu 'toolhead': New minimum RTT: sent_time=3598.679813632,half_rtt=0.00025366650015712366,freq=119998278.07607986 +[2026-05-04 03:08:07.398] [info] [clocksync.cpp:206] [1994] mcu 'toolhead': New minimum RTT: sent_time=3600.6480984659997,half_rtt=0.0002511045001938328,freq=119998277.78790867 +[2026-05-04 03:08:38.076] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:3607.4658494026426,last_temp:29.968158275533256,temp:29.968158275533256,target_temp:0,smoothed_temp:30.023370119139788 +[2026-05-04 03:08:40.029] [info] [heater_bed.cpp:57] [1934] cmd_M140 temp 0 wait false +[2026-05-04 03:08:40.029] [info] [heaters.cpp:1104] [1934] __func__:set_temperature,temp:0,wait:false +[2026-05-04 03:08:40.029] [info] [toolhead.cpp:904] [1934] get_last_move_time +[2026-05-04 03:08:40.029] [info] [idle_timeout.cpp:294] [1934] Device idle, activating heated bed protection. +[2026-05-04 03:08:44.888] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:3614.27800000038,last_temp:24.965355640380437,temp:24.965355640380437,target_temp:0,smoothed_temp:24.968197085752653 +[2026-05-04 03:09:37.981] [error] [tmc_uart.cpp:319] [1934] _decode_read error #1 +[2026-05-04 03:10:08.501] [error] [tmc_uart.cpp:295] [1934] _decode_read error #0 +[2026-05-04 03:10:11.450] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 03:10:34.096] [warning] [clocksync.cpp:181] [1934] queries_pending 2 +[2026-05-04 03:10:38.077] [info] [heaters.cpp:423] [1994] __func__:temperature_callback,heater_name:extruder,read_time:3727.467564156879,last_temp:29.999888543576674,temp:29.999888543576674,target_temp:0,smoothed_temp:30.047775822930703 +[2026-05-04 03:10:45.387] [info] [heaters.cpp:423] [1986] __func__:temperature_callback,heater_name:heater_bed,read_time:3734.77800000038,last_temp:24.955454494606386,temp:24.955454494606386,target_temp:0,smoothed_temp:24.957922485777836 diff --git a/klippy-test/Cargo.toml b/klippy-test/Cargo.toml new file mode 100644 index 0000000..570929f --- /dev/null +++ b/klippy-test/Cargo.toml @@ -0,0 +1,7 @@ +[package] +name = "klippy-test" +version = "0.1.0" +edition = "2024" + +[dependencies] +anyhow = "1.0" diff --git a/klippy-test/deploy.sh b/klippy-test/deploy.sh new file mode 100755 index 0000000..cf1cef4 --- /dev/null +++ b/klippy-test/deploy.sh @@ -0,0 +1,3 @@ +cross build --release --target armv7-unknown-linux-musleabihf +sshpass -p MTY4ODE2 scp ./target/armv7-unknown-linux-musleabihf/release/klippy-test root@192.168.0.86:/root/ +sshpass -p MTY4ODE2 scp ./start-rpmsg.sh root@192.168.0.86:/root/ diff --git a/klippy-test/src/main.rs b/klippy-test/src/main.rs new file mode 100644 index 0000000..26599c0 --- /dev/null +++ b/klippy-test/src/main.rs @@ -0,0 +1,395 @@ +use std::fs::OpenOptions; +use std::io::{ErrorKind, Read, Write}; +use std::thread; +use std::time::{Duration, Instant}; + +const DEFAULT_DEVICE: &str = "/dev/rpmsg_ctrl-dsp_rproc@0"; +const DEFAULT_COUNT: u8 = 40; +const SYNC: u8 = 0x7e; + +fn main() -> anyhow::Result<()> { + let config = Config::from_args()?; + + println!("device={}", config.device); + println!("identify offset={} count={}", config.offset, config.count); + + let mut dev = OpenOptions::new() + .read(true) + .write(true) + .open(&config.device)?; + + drain_stale_frames(&mut dev, config.drain_ms)?; + + if config.try_all_seqs { + for seq_low in 0..=0x0f { + let seq = 0x10 | seq_low; + let request = encode_identify_request(seq, config.offset, config.count)?; + println!("tx seq=0x{seq:02x} {}", hex_bytes(&request)); + dev.write_all(&request)?; + dev.flush()?; + thread::sleep(Duration::from_millis(config.between_writes_ms)); + } + } else { + let request = encode_identify_request(config.seq, config.offset, config.count)?; + println!("tx seq=0x{:02x} {}", config.seq, hex_bytes(&request)); + dev.write_all(&request)?; + dev.flush()?; + } + + let mut raw = Vec::new(); + let mut buf = [0u8; 4096]; + let deadline = Instant::now() + Duration::from_millis(config.timeout_ms); + let mut saw_identify = false; + + while Instant::now() < deadline { + match dev.read(&mut buf) { + Ok(0) => thread::sleep(Duration::from_millis(20)), + Ok(n) => { + println!("rx_chunk={}", hex_bytes(&buf[..n])); + let start = raw.len(); + raw.extend_from_slice(&buf[..n]); + for frame in split_frames(&raw[start..]) { + saw_identify |= print_frame(frame); + } + } + Err(err) + if matches!( + err.kind(), + ErrorKind::WouldBlock | ErrorKind::Interrupted | ErrorKind::TimedOut + ) => + { + thread::sleep(Duration::from_millis(20)); + } + Err(err) => return Err(err.into()), + } + } + + if raw.is_empty() { + println!("no response before timeout"); + } else { + println!("rx_total={}", hex_bytes(&raw)); + } + + if !saw_identify { + println!("no identify_response frame observed"); + } + + Ok(()) +} + +#[derive(Debug)] +struct Config { + device: String, + seq: u8, + offset: u32, + count: u8, + timeout_ms: u64, + drain_ms: u64, + between_writes_ms: u64, + try_all_seqs: bool, +} + +impl Config { + fn from_args() -> anyhow::Result { + let mut device = DEFAULT_DEVICE.to_string(); + let mut seq = 0x10; + let mut offset = 0; + let mut count = DEFAULT_COUNT; + let mut timeout_ms = 2_000; + let mut drain_ms = 500; + let mut between_writes_ms = 50; + let mut try_all_seqs = false; + let mut args = std::env::args().skip(1); + + while let Some(arg) = args.next() { + match arg.as_str() { + "--device" | "-d" => { + device = args + .next() + .ok_or_else(|| anyhow::anyhow!("missing value for {arg}"))?; + } + "--offset" | "-o" => { + offset = args + .next() + .ok_or_else(|| anyhow::anyhow!("missing value for {arg}"))? + .parse()?; + } + "--seq" | "-s" => { + let value = args + .next() + .ok_or_else(|| anyhow::anyhow!("missing value for {arg}"))?; + seq = parse_u8(&value)?; + } + "--count" | "-c" => { + count = args + .next() + .ok_or_else(|| anyhow::anyhow!("missing value for {arg}"))? + .parse()?; + } + "--timeout-ms" | "-t" => { + timeout_ms = args + .next() + .ok_or_else(|| anyhow::anyhow!("missing value for {arg}"))? + .parse()?; + } + "--drain-ms" => { + drain_ms = args + .next() + .ok_or_else(|| anyhow::anyhow!("missing value for {arg}"))? + .parse()?; + } + "--between-writes-ms" => { + between_writes_ms = args + .next() + .ok_or_else(|| anyhow::anyhow!("missing value for {arg}"))? + .parse()?; + } + "--try-all-seqs" => { + try_all_seqs = true; + } + "--help" | "-h" => { + print_help(); + std::process::exit(0); + } + _ => anyhow::bail!("unknown argument: {arg}"), + } + } + + Ok(Self { + device, + seq, + offset, + count, + timeout_ms, + drain_ms, + between_writes_ms, + try_all_seqs, + }) + } +} + +fn print_help() { + println!( + "Usage: klippy-test [--device /dev/rpmsg1] [--seq 0x10] [--offset 0] [--count 40] [--timeout-ms 2000] [--try-all-seqs]\n\n\ + Drains stale traffic, sends Klipper identify request(s), and prints raw/decoded responses.\n\ + Stop elegoo_printer before using this to avoid stealing/desyncing messages." + ); +} + +fn parse_u8(value: &str) -> anyhow::Result { + if let Some(hex) = value.strip_prefix("0x") { + Ok(u8::from_str_radix(hex, 16)?) + } else { + Ok(value.parse()?) + } +} + +fn drain_stale_frames(dev: &mut std::fs::File, drain_ms: u64) -> anyhow::Result<()> { + if drain_ms == 0 { + return Ok(()); + } + + println!("draining stale traffic for {drain_ms}ms"); + let deadline = Instant::now() + Duration::from_millis(drain_ms); + let mut buf = [0u8; 4096]; + + while Instant::now() < deadline { + match dev.read(&mut buf) { + Ok(0) => thread::sleep(Duration::from_millis(20)), + Ok(n) => println!("drain_chunk={}", hex_bytes(&buf[..n])), + Err(err) + if matches!( + err.kind(), + ErrorKind::WouldBlock | ErrorKind::Interrupted | ErrorKind::TimedOut + ) => + { + thread::sleep(Duration::from_millis(20)); + } + Err(err) => return Err(err.into()), + } + } + + Ok(()) +} + +fn encode_identify_request(seq: u8, offset: u32, count: u8) -> anyhow::Result> { + let mut content = Vec::new(); + content.push(0x01); // Klipper default: identify offset=%u count=%c + encode_vlq(offset, &mut content)?; + content.push(count); + Ok(encode_frame(seq, &content)) +} + +fn encode_frame(seq: u8, content: &[u8]) -> Vec { + let len = 1 + 1 + content.len() + 2 + 1; + let mut frame = Vec::with_capacity(len); + frame.push(len as u8); + frame.push(seq); + frame.extend_from_slice(content); + let crc = crc16_ccitt_klipper(&frame); + frame.extend_from_slice(&crc.to_be_bytes()); + frame.push(SYNC); + frame +} + +fn encode_vlq(mut value: u32, out: &mut Vec) -> anyhow::Result<()> { + if value == 0 { + out.push(0); + return Ok(()); + } + + let mut bytes = [0u8; 5]; + let mut count = 0; + while value != 0 { + bytes[count] = (value & 0x7f) as u8; + value >>= 7; + count += 1; + } + + for index in (0..count).rev() { + let mut byte = bytes[index]; + if index != 0 { + byte |= 0x80; + } + out.push(byte); + } + + Ok(()) +} + +fn decode_vlq(bytes: &[u8], offset: &mut usize) -> Option { + let mut value = 0u32; + + loop { + let byte = *bytes.get(*offset)?; + *offset += 1; + value = (value << 7) | u32::from(byte & 0x7f); + if byte & 0x80 == 0 { + return Some(value); + } + } +} + +fn split_frames(bytes: &[u8]) -> Vec<&[u8]> { + let mut frames = Vec::new(); + let mut offset = 0; + + while offset < bytes.len() { + let len = bytes[offset] as usize; + if len == 0 || offset + len > bytes.len() { + break; + } + frames.push(&bytes[offset..offset + len]); + offset += len; + } + + frames +} + +fn print_frame(frame: &[u8]) -> bool { + if frame.len() < 5 || frame.first().copied() != Some(frame.len() as u8) { + println!("frame malformed raw={}", hex_bytes(frame)); + return false; + } + + let len = frame[0]; + let seq = frame[1]; + let content = &frame[2..frame.len() - 3]; + let crc = &frame[frame.len() - 3..frame.len() - 1]; + let computed_crc = crc16_ccitt_klipper(&frame[..frame.len() - 3]).to_be_bytes(); + let term = frame[frame.len() - 1]; + + println!( + "frame len={} seq=0x{seq:02x} content={} crc={} computed_crc={} crc_ok={} term=0x{term:02x}", + len, + hex_bytes(content), + hex_bytes(crc), + hex_bytes(&computed_crc), + crc == computed_crc + ); + + if content.first().copied() == Some(0x00) { + print_identify_response(content); + true + } else { + false + } +} + +fn print_identify_response(content: &[u8]) { + let mut offset = 1; + let Some(response_offset) = decode_vlq(content, &mut offset) else { + println!("identify_response decode failed: missing offset"); + return; + }; + + let Some(&data_len) = content.get(offset) else { + println!("identify_response decode failed: missing data length"); + return; + }; + offset += 1; + + let data_len = data_len as usize; + let Some(data) = content.get(offset..offset + data_len) else { + println!("identify_response decode failed: truncated data"); + return; + }; + + println!( + "identify_response offset={} data_len={} data={}", + response_offset, + data_len, + hex_bytes(data) + ); + + if data.starts_with(&[0x78, 0xda]) || data.starts_with(&[0x78, 0x9c]) { + println!("identify_response data looks like a zlib stream start"); + } +} + +fn crc16_ccitt_klipper(bytes: &[u8]) -> u16 { + let mut crc = 0xffffu16; + + for byte in bytes { + crc ^= *byte as u16; + for _ in 0..8 { + if crc & 1 != 0 { + crc = (crc >> 1) ^ 0x8408; + } else { + crc >>= 1; + } + } + } + + crc +} + +fn hex_bytes(bytes: &[u8]) -> String { + bytes + .iter() + .map(|byte| format!("{byte:02x}")) + .collect::>() + .join(" ") +} + +#[cfg(test)] +mod tests { + use super::*; + + #[test] + fn encodes_initial_identify_request() { + let frame = encode_identify_request(0x10, 0, 40).unwrap(); + + assert_eq!(&frame[..5], [0x08, 0x10, 0x01, 0x00, 0x28]); + assert_eq!(frame.last().copied(), Some(0x7e)); + assert_eq!( + crc16_ccitt_klipper(&frame[..5]).to_be_bytes(), + [frame[5], frame[6]] + ); + } + + #[test] + fn validates_known_ack_crc() { + assert_eq!(crc16_ccitt_klipper(&[0x05, 0x10]), 0x9e81); + } +} diff --git a/klippy-test/start-rpmsg.sh b/klippy-test/start-rpmsg.sh new file mode 100755 index 0000000..94ad44d --- /dev/null +++ b/klippy-test/start-rpmsg.sh @@ -0,0 +1,156 @@ +#!/bin/sh +set -eu + +REMOTEPROC_STATE=/sys/class/remoteproc/remoteproc0/state +CTRL_DEV=/dev/rpmsg_ctrl-dsp_rproc@0 +REMOTE_NAME=dsp_rproc@0 +ENDPOINT_NAME=cpu_dsp0 +LOG=/tmp/start-rpmsg.log +RESTART=1 +RUN_IDENTIFY=0 + +usage() { + cat <&2 + usage >&2 + exit 2 + ;; + esac + shift +done + +if pidof elegoo_printer >/dev/null 2>&1; then + echo "elegoo_printer is running. Stop it before creating a standalone RPMsg endpoint." >&2 + exit 1 +fi + +if [ ! -w "$REMOTEPROC_STATE" ]; then + echo "missing or non-writable remoteproc state: $REMOTEPROC_STATE" >&2 + exit 1 +fi + +if ! command -v rpmsg_test >/dev/null 2>&1; then + echo "missing rpmsg_test utility" >&2 + exit 1 +fi + +if [ "$RESTART" -eq 1 ]; then + echo "restarting DSP remoteproc0" + echo stop > "$REMOTEPROC_STATE" 2>/dev/null || true + sleep 1 + echo start > "$REMOTEPROC_STATE" + sleep 1 +else + echo "leaving remoteproc0 state unchanged" +fi + +deadline=$(( $(date +%s) + 8 )) +while [ ! -e "$CTRL_DEV" ]; do + if [ "$(date +%s)" -ge "$deadline" ]; then + echo "timed out waiting for $CTRL_DEV" >&2 + exit 1 + fi + sleep 1 +done + +before="$(ls /dev/rpmsg[0-9]* 2>/dev/null || true)" + +echo "creating endpoint '$ENDPOINT_NAME' through $CTRL_DEV" +rm -f "$LOG" +rpmsg_test -r "$REMOTE_NAME" -c "$ENDPOINT_NAME" >"$LOG" 2>&1 & +rpmsg_pid=$! + +created="" +deadline=$(( $(date +%s) + 8 )) +while [ -z "$created" ]; do + current="$(ls /dev/rpmsg[0-9]* 2>/dev/null || true)" + for dev in $current; do + found_before=0 + for old in $before; do + if [ "$dev" = "$old" ]; then + found_before=1 + break + fi + done + if [ "$found_before" -eq 0 ]; then + created="$dev" + break + fi + done + + if [ -n "$created" ]; then + break + fi + + if ! kill -0 "$rpmsg_pid" 2>/dev/null; then + echo "rpmsg_test exited before creating an endpoint" >&2 + cat "$LOG" >&2 2>/dev/null || true + exit 1 + fi + + if [ "$(date +%s)" -ge "$deadline" ]; then + echo "timed out waiting for /dev/rpmsgN endpoint" >&2 + kill "$rpmsg_pid" 2>/dev/null || true + cat "$LOG" >&2 2>/dev/null || true + exit 1 + fi + + sleep 1 +done + +kill "$rpmsg_pid" 2>/dev/null || true +sleep 1 + +if [ ! -e "$created" ]; then + fallback="$(ls /dev/rpmsg[0-9]* 2>/dev/null | tail -n 1 || true)" + if [ -n "$fallback" ]; then + created="$fallback" + fi +fi + +if [ ! -e "$created" ]; then + echo "endpoint disappeared after rpmsg_test exited" >&2 + cat "$LOG" >&2 2>/dev/null || true + exit 1 +fi + +echo "created_endpoint=$created" +echo "remoteproc_state=$(cat "$REMOTEPROC_STATE" 2>/dev/null || true)" +echo "rpmsg_devices:" +ls -l /dev/rpmsg* 2>/dev/null || true + +if [ "$RUN_IDENTIFY" -eq 1 ]; then + if [ ! -x ./klippy-test ]; then + echo "./klippy-test not found or not executable" >&2 + exit 1 + fi + exec ./klippy-test --device "$created" --drain-ms 0 --timeout-ms 5000 +fi + +echo "next: ./klippy-test --device $created --drain-ms 0 --timeout-ms 5000"